Messschieber analog 150 mm
150mm Digital Caliper Absolute Slide With 0.02mm Resolution, IP54 Plastic Case - Metav IndustryLine
Combining 0.02 mm accuracy with IP54 protection and an absolute measuring system provides dependable workshop measurements and consistent quality control; order the instrument directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper 150 mm, IP54 (DIN 862) — Metav IndustryLine The Digital Caliper 150 mm, IP54 (DIN 862) is a compact, workshop-ready absolute caliper for precise external, internal, depth and step measurements in standard machining environments. IP54 protection for dusty and damp environments Absolute measuring system with 0.02 mm accuracy Stainless steel construction with glass scale RB 6 data output for digital integration Robust accuracy for everyday metrology This caliper delivers 0.02 mm accuracy on an absolute measuring system, a combination that gives reliable, repeatable readings across routine inspection tasks. The stainless steel body with a glass scale resists wear while maintaining stable guidance, so measurements remain consistent over time. Built to the DIN 862 standard, the instrument suits general metalworking and maintenance use where a balance of reach and stiffness is required. Clear digital readout and data connectivity The instrument features a digital display with on/off, 0/ABS, mm/inch and Origin controls for intuitive operation. A RB 6 data output permits straightforward connection to data loggers or inspection software, enabling traceable records and faster quality workflows. The display resolution and measurement logic reduce interpretation errors, which speeds up checking procedures and supports process documentation in production environments. Four measurement modes and practical handling Equipped for four-fold measurement (external, internal, depth and step), the caliper replaces several single-purpose gauges, saving bench space and simplifying inspection sequences. The compact 150 mm format is classified in the standard range for workshop calipers, offering an optimal compromise between reach and rigidity that enhances single-hand handling and repeatable results for typical machine‑shop components. Durable protection and transport convenience With IP54 ingress protection and delivery in a protective case, the device withstands workshop conditions and is safer to store and transport between job sites. The lightweight construction (approx. 0.4 kg) and secure jaws reduce operator fatigue during repeated checks, while the battery-powered electronics (3 V CR2032) keep downtime to a minimum. For workshop-ready precision with robust protection, request the Metav IndustryLine Digital Caliper M216.255 from Metav Werkzeuge GmbH or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification support Technical Data Article number: M216.255 GTIN: 4054469182551 Eclass: 21170344 Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution / display: 0.02 mm Accuracy: ±0.02 mm Weight: 0.4 kg Battery: 3 V CR 2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: Absolute Measurement modes: external, internal, depth, step Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, Origin button Delivered in protective case for transport FAQ Is the caliper suitable for workshop environments with splash and dust? The Digital Caliper 150 mm meets IP54 and is designed for dusty and damp workshop conditions, providing protected operation without compromising accuracy. Can measurement data be exported to inspection software? Yes. The instrument includes a RB 6 data output for direct connection to data loggers or PC systems to streamline record keeping. Which measurement types are possible with this caliper? This caliper supports four measurement tasks: external, internal, depth and step measurements, covering most routine inspection needs. What is the display resolution and typical accuracy? The digital readout displays at 0.02 mm resolution, with an accuracy of ±0.02 mm, suitable for standard machine‑shop quality control. Is the caliper supplied ready for transport and storage? The tool is supplied in a protective case for safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Depth Gauge Stainless Steel Body 100mm Rod, 0.01mm Resolution, DIN 862 - Metav IndustryLine
Compact digital depth gauge with a 0–150 mm measuring range and 0.01 mm display resolution, delivered ready for workshop use and compliant with DIN 862. Benefit from hardened stainless steel construction and a clear digital readout for efficient depth inspection; order directly via Metav Werkzeuge or consult the team for application advice. Digital depth gauge M218.024.N — 0–150 mm depth gauge, stainless steel, DIN 862 A Digital depth gauge M218.024.N designed for dependable depth measurement in workshop and quality‑control environments, offering a standard workshop range and straightforward digital operation. Digital display with 0.01 mm resolution Hardened stainless steel construction Conforms to DIN 862 Consistent measurement accuracy for process control The instrument offers a measurement range of 0–150 mm with a display resolution of 0.01 mm (equivalent to 0.0005 in), supporting repeatable depth checks on machined parts and assemblies. As a standard‑range tool it balances reach and stiffness, making it suitable for general machine‑tool inspections and routine quality control. The gauge’s conformity with DIN 862 assures compatibility with established workshop tolerances and inspection routines, enabling reliable pass/fail decisions and faster decision cycles on the shop floor. Clear digital operation reduces cycle time Equipped with a digital display and tactile controls — ON/OFF, ZERO, UNIT and HOLD — the gauge simplifies reading, zeroing and switching between metric and imperial units. Power is supplied by a 3 V cell, offering long service for intermittent use, while the low display resolution and HOLD function speed up measurement recording and reporting. The compact design and modest mass (approx. 0.45 kg) aid single‑hand operation and make repetitive depth checks less fatiguing, which translates into improved throughput during inspection routines. Robust construction for everyday workshop use Built from hardened stainless steel with a metal housing, the gauge resists wear and contamination common in industrial environments; this longevity reduces downtime and replacement frequency. The depth rod and guiding surfaces are finished to minimise play and ensure stable contact, so readings remain consistent over extended production runs. The combination of solid materials and a protective housing preserves calibration and supports reproducible results across batches, contributing to overall process reliability. Practical compatibility and data options The depth gauge integrates basic digital features for fast integration into existing workflows: a stable readout, metric/imperial switching and a straightforward interface. The instrument is assigned GTIN and SKU identifiers for inventory management and traceability and is suitable as a shop‑floor reference device for depth inspection tasks in mechanical engineering and metalworking. For operations requiring downstream data capture, note the device’s specified data output, which can be checked against interface requirements. For tailored procurement and application guidance based on Metav’s quality portfolio, contact Metav Werkzeuge in Emmerich for advice and order coordination. Technical data Article number: M218.024.N GTIN: 4054469160078 Manufacturer: Metav IndustryLine Norm: DIN 862 Facts Measurement range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Weight: 0.45 kg Power supply: 3 V Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, ZERO, UNIT, HOLD Measurement type: digital depth gauge Data output: RB 5 Probe/rod length: 100 mm FAQ What is the measuring range and precision of this gauge? The gauge offers a 0–150 mm measuring range with a display resolution of 0.01 mm, suitable for standard workshop depth checks. Is the instrument suitable for routine quality control in a metalworking shop? Yes — the hardened stainless steel construction and DIN 862 compliance make the gauge appropriate for regular inspection tasks in machining and metal fabrication. How is the display operated and what unit options are available? The display provides ON/OFF, ZERO, UNIT and HOLD functions; unit selection allows switching between millimetres and inches (0.0005 in resolution). Can data be exported from the device? The device specifies a data output labelled RB 5 for integration; compatibility should be confirmed against the receiving system. What is the product designation and SKU for ordering? This depth gauge is designated Digital depth gauge M218.024.N and is listed under SKU M218.024.N for procurement and inventory. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper With Cross Tips, 0.01mm Resolution, Depth Rod Ø1.5mm, Inductive, ISO 13385 - Helios Preisser
Take advantage of precise workshop measurement with an inductive measuring system and a clear LCD readout, combined with robust stainless steel construction for dependable daily use. Order the pocket digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket digital caliper DIGI‑MET with cross tips — Inductive system and clear LCD, Helios Preisser DIGI‑MET with cross tips is a compact pocket digital caliper designed for fast, repeatable measurements in workshops and inspection benches Inductive measuring system High-resolution readout 0.01 mm Stainless steel construction Depth probe round Ø 1.5 mm Accurate measurement that keeps production moving The compact digital caliper delivers reliable accuracy with a resolution of 0.01 mm and a stated tolerance of ±0.03 mm, making it suitable for routine quality checks and setup tasks. The inductive system reduces contact wear and provides stable readings even under demanding workshop conditions. As a result, measurement cycles are shorter and decisions on part acceptance or rework are supported by consistent numeric data rather than estimates. Clear display and straightforward handling for everyday use A tall LCD display (11 mm) with intuitive functions such as ON/OFF, mm/inch conversion, PRESET and key lock simplifies reading and reduces time spent interpreting results. The instrument includes a locking screw for secure measurement retention and cross tips to assist with interior and exterior checks. The absence of a data output port means the caliper is optimised for rapid manual checks rather than automated logging, which suits many bench and field applications where quick verification is the priority. Built for workshop durability and versatile measurement Constructed from stainless steel, the caliper tolerates routine handling and maintains calibration stability. The integrated depth probe (round Ø 1.5 mm) extends usability to narrow or recessed features, while the compact form factor supports transport in tool kits. Conformity with ISO 13385 underlines the manufacturing standard and helps procurement decisions that require traceable tool quality. The device supports four measurement modes, enabling interior, exterior, depth and step measurements with a single instrument. For precise, robust workshop measurement rely on the Helios Preisser DIGI‑MET pocket digital caliper — contact Metav Werkzeuge in Emmerich for tailored advice or to secure stock from our European quality hub. Technical data Article number: 1320416 GTIN: 4029713018962 Manufacturer: Helios Preisser Product name: Pocket digital caliper DIGI‑MET with cross tips Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm LCD height: 11 mm Jaw length: 40 mm Data output: none Measurement system: inductive 4‑way measurement: yes Special features Material: stainless steel Depth gauge: round Ø 1.5 mm Cross tips for internal and external measurements Locking screw included LCD functions: ON/OFF, mm/inch, PRESET, key lock Standard: ISO 13385 FAQ What measurement range and resolution does the DIGI‑MET offer? The Helios Preisser pocket digital caliper DIGI‑MET (SKU 1320416) covers 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm. Is the caliper suitable for depth measurements in narrow bores? Yes, the DIGI‑MET includes a round depth probe Ø 1.5 mm, enabling depth checks in narrow or recessed features. Can measurement data be transferred to a PC or data logger? The instrument is supplied without a data output port (data output: none), so readings are intended for direct manual recording rather than automated transfer. How does the inductive measuring system benefit workshop use? The inductive system reduces wear on the measuring carriage and provides stable, repeatable readings under normal workshop conditions; this supports efficient quality control on the shop floor. Which standard does the caliper conform to and what does that mean? The tool meets ISO 13385, indicating it is manufactured to defined quality and dimensional tolerances, which assists with procurement and inspection traceability. Helios Preisser — Contact via Metav Werkzeuge: Emmerich am Rhein, Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930
150mm Digital Precision Caliper With Round Depth Probe Ø1.5mm, LCD IP67 - Helios Preisser
Take advantage of a combination of accurate measurement, rugged workshop protection and practical handling for reliable inspection and production. Order the precision tool directly via Metav Werkzeuge or consult our specialists for application advice. DIGI‑MET digital pocket caliper with cross‑point jaws — Helios Preisser, IP67, stainless steel DIGI‑MET digital pocket caliper with cross‑point jaws is a compact precision measuring instrument for general workshop and quality control tasks, offering four-way measurement and a protected digital display. IP67 protection for wet and dusty use Stainless steel construction for durability 0–150 mm range with 0.01 mm resolution Cross‑point jaws for precise edge contact Depth rod Ø1.5 mm for narrow-bore measurement Consistent accuracy that speeds up inspection The compact digital caliper delivers ±0.03 mm accuracy across a 0–150 mm measuring span with 0.01 mm resolution, enabling dependable results for incoming inspection and in‑process checks. Conformity with ISO 13385 provides an objective quality standard, which supports traceable measurement routines and reduces the risk of rework. The high readout precision combined with a stable jaw geometry ensures reproducible measurements on small batch or series work. Built to withstand workshop conditions A stainless steel body and sealed electronics with IP67 protection mean the instrument tolerates coolant splash, chips and the day‑to‑day wear of a busy bench. The rugged construction reduces downtime for replacements and keeps calibration intervals predictable. For workshops seeking long service life from their metrology tools, the mechanical robustness and sealed display assembly contribute to lower total cost of ownership and more consistent production output. Practical features that improve workflow The clear LCD (11 mm) offers fast readout switching between mm/inch and includes ON/OFF, PRESET and a key lock for stable settings; a locking screw secures measurements for transfer or recording. Cross‑point jaws deliver secure contact on edges, while the slim depth rod Ø1.5 mm allows depth checks in narrow bores. Four‑way measurement capability (external, internal, depth, step) and a compact footprint enable versatile use across inspection benches, assembly stations and mobile toolboxes. Note: the instrument is supplied without data output, so readings are taken directly from the display. Contact Metav Werkzeuge for tailored advice on the Helios Preisser DIGI‑MET and reliable supply from our Emmerich facility Technical data Article number: 1326416 Manufacturer: Helios Preisser GTIN: 4029713019044 Model: DIGI‑MET with cross‑point jaws Type: Digital pocket caliper Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm Special features Material: stainless steel Protection class: IP67 Display: LCD 11 mm with ON/OFF, mm/inch, PRESET, key lock Depth rod: round Ø1.5 mm Locking screw Four‑way measurement (external/internal/depth/step) Data output: none Standard: ISO 13385 FAQ What measurement range and resolution does the caliper provide? The digital pocket caliper offers a measuring range of 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm. Is the instrument suitable for use at the machine or in damp environments? Yes, the DIGI‑MET by Helios Preisser is designed with IP67 protection and a stainless steel body, making it suitable for wet or chip‑exposed workshop conditions. Can the caliper record measurements electronically? This model is supplied without a data output interface; readings are taken from the integrated LCD display. Which measurement functions are available with this tool? The caliper supports external, internal, depth and step measurements and includes cross‑point jaws plus a depth rod Ø1.5 mm for narrow bores. Does the product comply with common measurement standards? The instrument meets ISO 13385, ensuring a recognised baseline for precision measuring equipment. Helios Preisser — Supplier: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Tel: +49 2822 7131930
150mm Digital Precision Caliper With Square Depth Rod, 0.01mm Resolution, Inductive System, ISO 13385 - Helios Preisser
Take advantage of precise inductive measuring, robust stainless steel construction and clear LCD readout for efficient workshop measurement tasks; order directly via Metav Werkzeuge or consult our advisors for tailored advice. DIGI‑MET with cross points — Pocket digital caliper, 0–150 mm, inductive system (Helios Preisser) The DIGI‑MET pocket digital caliper offers accurate outside, inside, depth and step measurements for metalworking, toolmaking and workshop quality control. *Inductive measuring system for robust readings *High resolution 0.01 mm with ±0.03 mm accuracy *Stainless steel construction for workshop durability *Four-function measuring: inside/outside/depth/step Precision where it counts: reliable measurements in production The caliper uses an inductive measuring system, which provides stable, low‑wear sensing even in workshop environments where light contamination and handling are common. With a measuring range of 0–150 mm, a resolution of 0.01 mm and an accuracy of ±0.03 mm, the instrument supports repeatable dimensional control for small parts and general engineering work. The four basic measurement modes—outside, inside, depth and step—are integrated to reduce tool changes and speed up inspection routines, delivering a clear productivity advantage for repetitive tasks. Practical design for everyday workshop use A compact pocket design with a 40 mm jaw length and a square depth gauge gives secure contact and improved stability when measuring grooves, recesses and depths. The 11 mm LCD display with ON/OFF, mm/inch and PRESET functions and a key lock enables fast reading and simple unit conversion on the fly. A locking screw secures the slider after setting, preventing accidental changes during transfer to recording or documentation. Note: this instrument does not provide a data output interface; readings must be recorded manually. Built for durability and traceability Constructed from stainless steel and conforming to ISO 13385, the caliper is designed for long service life and traceable quality control. Cross‑point contact tips increase versatility when locating on small features, while the inductive system minimises the effect of surface wear on long‑term accuracy. As a compact measuring instrument from Helios Preisser, it suits workshops and service departments that prioritise straightforward, dependable measurement tools that reduce rework and support consistent production quality. Contact Metav Werkzeuge in Emmerich for personal advice on integrating the Helios Preisser DIGI‑MET pocket digital caliper into existing inspection routines and to place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 1320417 GTIN: 4029713018979 Manufacturer: Helios Preisser Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Jaw length: 40 mm Special features Stainless steel construction Inductive measuring system Four‑function measuring (outside, inside, depth, step) Square depth gauge Locking screw No data output Conforms to ISO 13385 FAQ What measurement functions does the caliper offer? The caliper supports outside, inside, depth and step measurements; cross‑point tips aid contact on small features. What are the resolution and accuracy of this instrument? Resolution is 0.01 mm with an accuracy of ±0.03 mm, suitable for routine workshop quality checks with the DIGI‑MET pocket caliper. Is the display easy to read in low light? The 11 mm LCD display provides high‑contrast numerals for clear readings under typical workshop lighting. Can measurement data be transferred to a PC? This model has no data output interface; measurements are read from the display and recorded manually. Is the caliper suitable for harsh workshop environments? Yes—stainless steel construction and an inductive measuring system reduce sensitivity to wear and light contamination, extending usable service life. Helios Preisser — Supplier: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
150mm Precision Caliper Depth Measurement Square Tips LCD Display 0.01mm, IP67 - Helios Preisser
Take advantage of precise 0–150 mm measurement, robust IP67 protection and a stainless steel construction for dependable results in demanding workshop environments; order the DIGI‑MET pocket caliper directly via Metav Werkzeuge or consult our specialists for application advice. DIGI‑MET pocket caliper — compact digital caliper, IP67 protection, 0–150 mm range by Helios Preisser The DIGI‑MET with cross tips is a compact digital pocket caliper designed for accurate outside, inside, depth and step measurement in workshop and on-site inspection tasks. IP67 protection for harsh environments Stainless steel body, corrosion-resistant Precise 0.01 mm resolution and 0.03 mm accuracy LCD display with mm/inch and lock function Consistent precision for production control The compact dial of this digital caliper delivers high reproducibility across routine checks thanks to a 0.01 mm resolution and a stated ±0.03 mm accuracy. With a measuring span of 0–150 mm, the instrument covers the most common machining tolerances while the integrated four measurement functions (outside, inside, depth and step) reduce tool changes and speed up inspection cycles. The IP67 rating and stainless steel construction ensure measurement stability even in damp or contaminated environments, supporting process reliability and reducing downtime. Clear readout and practical handling for faster workflow A high-contrast LCD display with an 11 mm digit height provides immediate readability in busy workshops, while the toggle functions (ON/OFF, mm/inch, PRESET and a key lock) enable quick unit changes and repeatable settings. The caliper’s locking screw secures readings when transferring measurements, and the cross tips plus an integrated rectangular depth gauge allow precise contact on small edges and slots. These ergonomic features translate into fewer measurement steps and a noticeably smoother metrology routine. Ready for industry standards and everyday use Constructed to ISO 13385 guidelines and manufactured by Helios Preisser, the instrument combines traceable standards with durable materials for long service life. The absence of a data output simplifies the tool for manual inspection regimes where direct logging is not required, while the robust stainless construction minimises maintenance. For workshops seeking a compact, low-maintenance digital caliper that withstands daily use, this model offers a practical balance of accuracy, durability and usability. For IP67-rated precision and workshop-ready durability from Helios Preisser, contact Metav Werkzeuge in Emmerich for stock information and application guidance: info@metav-werkzeuge.com | +49 2822 7131930 — reference SKU 1326417 Technical data Article number: 1326417 Manufacturer: Helios Preisser GTIN: 4029713019051 Designation: DIGI‑MET with cross tips (pocket caliper) Standard: ISO 13385 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm LCD digit height: 11 mm Protection class: IP67 Special features Material: stainless steel Digital LCD with ON/OFF, mm/inch, PRESET, key lock Locking screw for secured measurements Four measurement functions (outside, inside, depth, step) Rectangular depth gauge Cross-point measuring tips No data output FAQ What measurement functions does the caliper provide? The DIGI‑MET pocket caliper offers four measurement functions: outside, inside, depth and step measurement, enabling versatile inspection tasks in one compact tool. Is the instrument suitable for harsh workshop environments? Yes, the caliper’s IP67 rating and stainless steel construction make the DIGI‑MET robust against dust and temporary immersion, suitable for demanding workshop conditions. How readable is the display under workshop lighting? The large LCD display with 11 mm digit height on the DIGI‑MET ensures clear readability under typical workshop lighting and at a quick glance during production checks. Does the caliper support data transfer to a PC? This caliper is supplied without data output; it is intended for manual measurements and direct readout rather than automated data logging. Which standard does the instrument comply with? The instrument is manufactured in accordance with ISO 13385, offering alignment with recognised dimensional metrology requirements. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930
SOMT 150510 Indexable Insert for Aluminium - MetavCUT
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Specifications for indexable inserts SOMT 150510 from MetavCUT Brand: MetavCUT Manufacturer Order Number: SOMT150510-Aluminium Figures for the tool: ISO-Code: SOMT150510 Angle: 90° Thickness: 5,56mm Radius: 1 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: square Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-SOMT-150510-Aluminium-MetavCUT 40END
SOMT 150510 Indexable Insert for Stahl - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features indexable inserts SOMT 150510 from MetavCUT Brand: MetavCUT Manufacturer Order Number: SOMT150510-Steel Figures for the tool: ISO-Code: SOMT150510 Angle: 90° Thickness: 5,56mm Radius: 1 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: square Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-SOMT-150510-Stahl-MetavCUT 40END
200 mm Analoge Messschieber – kurz erklärt
- Messen außen, innen, Tiefe und Stufen
- Robuster Stahl, gut ablesbare Skala
- Feine Ablesung bis 0,05–0,02 mm (modellabhängig)
- Feststellschraube für wiederholgenaue Ergebnisse
Starke Hersteller
- Mitutoyo – sehr präzise, langlebig, große Auswahl im Bereich 0–200 mm
- Mahr – MarCal-Serie, von analog bis digital, zuverlässig in Werkstatt & Fertigung
Innovations-Tipp: MICROTECH (Ukraine)
Die 200-mm-Messschieber von MICROTECH gelten aktuell als die innovativsten am Markt.
- Patentierte Kraft-Messfunktion (Force-Modul) für reproduzierbares Antast-Gefühl
- Low-Force Varianten (schonend für weiche Materialien)
- Optionen mit Wireless/USB-Datenausgabe – bereit für Industrie 4.0
- Neuartige E-Ink-Anzeige (sehr kontrastreich, augenfreundlich)
- Erhältlich als 0–200 mm-Modelle
Worauf achten?
- DIN 862 beachten – sorgt für definierte Genauigkeit