MGMN CERMET 300-TD Indexable Insert - MetavCUT

A compact, high-stability solution that combines a 16 mm clamping profile, compatibility with MGMN 300 inserts and a short overall length for tight setups. The result is reliable parting performance with low tool change time; order the item directly via Metav Werkzeuge or request advice from the consultants if further specification is required. Cut-off clamping holder MGMN — 16 x 16 mm, 125 mm — Teknik Makina Cut-off clamping holder engineered for precise parting and grooving tasks in small to medium turning centres, compatible with MGMN 300 indexable inserts Compact 16 x 16 mm clamping profile Compatible with MGMN 300 inserts (Korloy) Robust M4x10 clamping screw, T15 hex key Total length 125 mm Lightweight at 0.23 kg for easy handling Consistent clamping for repeatable parting operations The holder delivers a stable 16 mm clamping footprint that minimises vibration and protects insert life during parting operations. The compact geometry and 16.3 mm cutting-head width position the insert accurately, which translates into consistent groove quality and reduced scrap rates. Useful for batch production where uniformity is essential, the construction helps maintain surface finish by keeping the cutting forces aligned; the M4x10 clamping screw ensures secure fixing with straightforward torque application and a T15 hex key interface for quick service. Designed to speed up setup and minimise downtime With a total length of 125 mm and a weight of just 0.23 kg, the tool holder is tailored for tight tool posts and changeovers where accessibility matters. The short overhang reduces deflection and contributes to higher permissible feeds without sacrificing control. Where throughput is critical, the holder’s simple interface with MGMN 300 inserts—an established insert form—reduces the variety of spares required and shortens change intervals. The compact profile therefore supports improved machine uptime and a more efficient production flow. Compatibility explained for workshop planners Supplied for use with MGMN 300 indexable inserts from manufacturers such as Korloy, the holder suits common parting tasks and offers straightforward integration into standard tooling setups. Its ISO designation 1616 and the bores/slots designed for the 3C MGMN 300 bar mean toolroom engineers can plan tool lists with confidence. The holder’s maximum parting depth of 16 mm and a cutting-edge width of 3 mm should be matched to insert grade and machine power; selecting the correct insert geometry and grade will determine surface finish and tool life. Built for practical maintenance and replacement cycles The mechanical design focuses on fast, dependable serviceability: a single M4x10 clamping screw secures the insert seat, and common hex tooling (T15) is used for routine intervention. This reduces tool kit complexity at the machine and lowers the time spent on minor repairs or insert indexing. The result is a holder that is simple to maintain while still offering the positional stability required for repeatable operations in production and jobbing environments. For technical clarification, suitability checks or to order the Teknik Makina cut-off clamping holder (SKU D014TM), please contact Metav Werkzeuge in Emmerich: phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — our specialists will advise on fitment, delivery and compatible inserts Technical data Article number: D014TM Name: Stechklemmhalter Brand: Teknik Makina Model / Type: MGMN Compatible inserts: MGMN 300 (Korloy) Facts Clamping width: 16 mm Overall height: 16 mm Cutting-head width: 16.3 mm Total length: 125 mm Weight: 0.23 kg Max parting depth: 16 mm Cutting width: 3 mm ISO designation: 1616 Special features For MGMN 300 inserts M4x10 clamping screw T15 hex key interface Bohrstange designation: 3C MGMN 300 FAQ What insert types fit this clamping holder? The holder is designed for MGMN 300 indexable inserts; compatible manufacturers include Korloy, matching the MGMN form factor for secure seating and predictable chip control. What is the maximum parting depth for this tool? Maximum recommended parting depth is 16 mm, specified to maintain stability and repeatable cut-off performance with the designed insert geometry. Which screw and tool are required for insert clamping? Insert clamping uses an M4x10 screw and is tightened with a T15 hex key for routine maintenance and secure fixing. Is the holder suitable for compact tool posts and smaller lathes? Yes — with a 125 mm overall length and a 16 x 16 mm profile, the holder suits tight tool-post arrangements and compact turning centres where reduced overhang is beneficial. What is the SKU and brand for ordering or spare listing? Order under SKU D014TM from Teknik Makina; Metav Werkzeuge can confirm delivery and compatible insert options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable parting operations thanks to a compact, square shank and robust clamping mechanism; the combination of a 12 × 12 mm shank, MGMN 300 compatibility and a secure M4x10 fastening delivers short setup times and reliable tool life. Order the holder directly via Metav Werkzeuge or consult the team for specification matching. Parting tool holder MGMN — 12 × 12 mm square shank, Teknik Makina The Parting tool holder MGMN is a compact, secure clamping solution for indexable parting inserts, engineered for short overhangs and consistent cut control in CNC turning applications Secure clamp for MGMN 300 inserts 12 × 12 mm shank for compact setups Includes M4x10 screw and T15 key Consistent parting accuracy for serial production A square 12 × 12 mm shank and a low-profile head deliver stable support for parting and grooving operations, which reduces chatter and increases reproducibility. The toolholder’s overall length of 125 mm and total height of 12 mm create a compact setup that is simple to position close to the workpiece; this minimises unsupported overhang and improves cutting-line stability. The measured cutting width 3 mm and maximum clamping depth of 12 mm are suitable for standard parting tasks where controlled, repeatable material separation is required. These characteristics contribute to predictable cycle times and make the holder particularly useful in small-batch production or mixed-series turning, where maintaining consistent edge engagement is crucial. Fast changeovers and secure clamping for lower downtime Changeovers are straightforward: the insert is clamped with an M4x10 screw secured using a T15 hex key, enabling quick insert replacement and minimal setup interruption. The design focuses on a positive mechanical seat rather than cosmetic finish, so the emphasis is on reliable force transmission and a tight fit between insert and clamp. Reduced setup time and secure fixation support higher machine utilisation and less scrap from misalignment. Where throughput and process stability are priorities, this toolholder’s simple mechanics provide an efficient way to keep machines running and inspection overheads low. Compatibility and integration with workshop tooling Engineered for use with MGMN 300 indexable inserts and listed compatibility with Korloy insert types, the holder conforms to an ISO 1212 style shank designation enabling straightforward integration into existing tool posts and turret stations. The item’s modest weight 0.13 kg and compact head width (12.3 mm) make it suitable for tight-tooling layouts and secondary operations. The holder is identified under SKU D013TM and the boar­d‑bar designation references 3C MGMN 300, which helps when matching clamping components or planning inventory. For workshops seeking a dependable, space-efficient parting solution that pairs with widely available insert stocks, this holder is a pragmatic choice. For procurement or technical matching of Teknik Cutting Tools holders, contact Metav Werkzeuge in Emmerich for specification support and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data SKU: D013TM Item name: Parting tool holder MGMN Manufacturer: Teknik Makina Facts Shank width: 12 mm Shank height: 12 mm Cutting head width: 12.3 mm Overall length: 125 mm Total height: 12 mm Maximum clamping depth: 12 mm Cutting width: 3 mm Weight: 0.13 kg ISO designation: 1212 Special features Compatible with MGMN 300 indexable inserts Recommended insert manufacturer: Korloy Fastening screw: M4x10 Required hex key size: T15 Boar‑bar designation: 3C MGMN 300 FAQ Which inserts fit this holder? The holder accepts MGMN 300 indexable inserts; Korloy-manufactured MGMN 300 inserts are explicitly listed as compatible for straightforward procurement. What is the maximum parting depth achievable? The clamping system supports a maximum clamping/parting depth of 12 mm, matching the holder’s designed engagement for controlled separation operations. Which screw and key are required for securing the insert? Insert fastening is performed with an M4x10 socket screw and a T15 hex key, allowing quick and reliable insert changes. Is the holder suitable for compact turret stations? Yes — with a 12 × 12 mm shank, 125 mm overall length and modest weight (0.13 kg), the holder is suited to tight tooling arrangements and short overhang requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the KL30TM parting blade’s precise 25 mm cutting height together with its slim 2.45 mm blade width for clean, repeatable parting cuts; order the KL30TM directly via Metav Werkzeuge or ask our consultants if needed. Parting Blade KL30TM — 25 mm cutting height, 2.45 mm blade width (Teknik Makina) The Parting Blade KL30TM is a robust parting bar for lathe and CNC applications, designed to accept MGMN 300 indexable inserts and deliver stable parting operations across short to medium depth cuts Precision 25 mm cutting height 2.45 mm slim blade for narrow cuts 150 mm overall length for stability Compatible with MGMN 300 inserts Reliable parting performance for production lathes The KL30TM offers a consistently controlled cutting geometry that reduces vibration and improves surface finish when parting-off components. With a 25 mm cutting height and a total length of 150 mm, the bar provides the necessary overhang and rigidity for many workshop and light industrial turning tasks. The relatively narrow 2.45 mm blade width enables narrow kerf cuts, which minimise material waste and shorten chip evacuation times. Combined, these dimensions help to maintain cycle times and reduce the need for secondary machining, delivering an efficient production flow. Precision geometry that reduces rework and scrap A narrow blade and defined cutting height ensure reliable insert positioning and repeatable results. The KL30TM is sized for MGMN 300 type indexable inserts — a standard insert format that allows quick replacement and consistent edge geometry without the need to regrind. Using indexable inserts means downtime is limited to fast insert changes, which lowers overall production costs and increases machine availability. The tool’s geometry supports clean break-off of workpieces, reducing burr formation and the risk of rework. Easy integration and practical workshop benefits Installation is straightforward in standard parting tool holders; the design supports a maximum parting depth of 36 mm when used with compatible clamping systems. Compatibility with established insert types and references such as N151-3 (as listed) and inserts from Korloy simplifies procurement and inventory management. For workshops aiming to centralise tool supply, the KL30TM fits into common machining setups without complex adaptations, helping to streamline tooling logistics and maintain predictable production results. Contact Metav Werkzeuge for tailored advice on the Teknik Makina KL30TM parting blade — call +49 2822 7131930 or email info@metav-werkzeuge.com to request technical details and fast supply from Emmerich. Technical Data SKU: KL30TM Manufacturer: Teknik Makina ECLASS: 21181018 Suitable inserts manufacturer: Korloy Numbers / Core technical data Blade height: 32 mm Cutting height: 25 mm Blade width: 2.45 mm Overall length: 150 mm Maximum parting depth (with suitable clamping): 36 mm Special features / Versions Compatible insert type: MGMN 300 Reference insert types mentioned: N151-3 Story trigger / listing reference: stechschwert FAQ Is the KL30TM compatible with Korloy MGMN 300 inserts? Yes. The KL30TM parting blade is specified for use with MGMN 300 indexable inserts and is listed for compatibility with Korloy insert types. What are the main dimensions of the parting blade? The KL30TM provides a blade height of 32 mm, a cutting height of 25 mm, a blade width of 2.45 mm and an overall length of 150 mm. How deep can the KL30TM cut? When mounted in a suitable clamping holder, the parting blade supports a maximum parting depth of 36 mm (clamping system dependent). Which insert references appear with this blade? The product listing references MGMN 300 inserts and includes the insert reference N151-3 as shown in the item listing. For what kinds of turning operations is this blade suitable? Designed as a parting tool, the KL30TM is suitable for controlled parting-off and narrow-groove operations on lathes and CNC turning centres that accept standard parting holders and MGMN-style indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com