Precision mounting micrometer heads for exact positioning
Precision mounting micrometer heads are specialised components designed to be integrated into fixtures, bespoke machines, optical tables and measurement systems to provide micrometre-accurate adjustment and positioning for parts, laser elements or probe tips. Their purpose is to deliver extremely repeatable, backlash-free linear motion with fine resolution, enabling precise control of travel and alignment in machining and metrology applications; available with flat, ball or carbide contact faces and in analogue or digital variants, they support automated quality control and process monitoring. These mounting micrometers, also known as micrometer heads or built-in micrometers, offer mounting via standardised drive shanks and provide adjustment ranges and resolutions suitable for high-precision assembly and inspection tasks.
13mm Mounting Micrometer Plan Parallel Spindle 5mm With Locking Collar, Chrome Finish - Metav IndustryLine
Compact inset micrometer head combining a 0–13 mm measuring range, 0.01 mm resolution and a fully hardened spindle; benefit from compact precision and robust wear resistance — order directly via Metav Werkzeuge or consult our advisers for application guidance. M303.116 inset micrometer head — compact, plan-parallel measuring for fine fixtures (Metav IndustryLine) A M303.116 inset micrometer head designed for precise, built-in measurement tasks in toolrooms, fixture plates and fine mechanical assemblies; ideal where space is limited but repeatable accuracy is required Compact 0–13 mm measuring range Plan-parallel measuring faces for stable contact Fully hardened spindle for long service life Matt chrome-plated drum for clear reading Integrated locking ring and fastening nut Precision where space is tight and readings must be repeatable This inset measuring head offers a 0–13 mm measuring range with an analogue reading step of 0.01 mm, making it a compact solution for fine mechanical set-ups and fixture integration. The small footprint and low mass support stable mounting in confined applications, delivering repeatable measurements that reduce rework and inspection time. The mechanical graduation provides a tactile, direct readout that is quick to interpret during production checks, supporting efficient quality control routines. Durable design for reliable long-term performance The measuring spindle is fully hardened and the drum is matt chrome-plated, reducing wear and preserving readability under regular use. The combination of a 5 mm spindle diameter and a 0.5 mm spindle pitch ensures smooth, precise feed and minimal backlash; the supplied locking ring (Feststellring) and fastening screw nut keep the setting secure during operation. These construction details translate into lower maintenance needs and consistent results across production runs. Easy integration into fixtures and measuring equipment Built as an inset or built-in unit, this micrometer head is engineered for simple installation in gauges, jigs or machine-mounted measuring points. With a compact length of 67 mm and a weight of only 0.1 kg, it is straightforward to position without introducing significant mass or imbalance to the assembly. The plan-parallel measuring faces give stable contact geometry for small workpieces and reference surfaces, helping to ensure that each measurement is comparable and traceable within workshop processes. Contact Metav Werkzeuge for tailored advice on integrating the M303.116 into fixtures or gauging systems; Metav Werkzeuge can advise on mounting options and supply for rapid delivery from Emmerich. Technical Data Article number: M303.116 GTIN: 4054469157948 Tariff number: 90173000 Category: Micrometer heads / Measuring screws Facts Measuring range: 0–13 mm Resolution / reading: 0.01 mm Spindle diameter: 5 mm Spindle pitch: 0.5 mm Length: 67 mm Weight: 0.1 kg Analogue device: yes Special features Plan-parallel measuring faces Fully hardened spindle Matt chrome-plated drum Locking ring (Feststellring) Fastening screw nut for secure mounting Inset / built-in design FAQ What is the measuring range and resolution of this micrometer head? The M303.116 inset micrometer head provides a measuring range of 0–13 mm with an analogue resolution of 0.01 mm. Is the spindle wear-resistant for production use? Yes, the spindle on the M303.116 is fully hardened to improve wear resistance and extend service life in regular production or gauge applications. Can this unit be mounted in a fixture or housing? The design is intended for inset mounting; the integrated fastening screw nut and locking ring simplify secure installation in gauges, jigs or fixture plates. What benefit does the matt chrome-plated drum provide? The matt chrome finish reduces glare and improves contrast for the engraved scale, making readings easier and less error-prone during repetitive inspection tasks. Is this device suitable for small-part measurement and precision toolmaking? Its compact form factor, plan-parallel faces and fine resolution make it well suited for fine mechanical work, toolmaking and small-part fixture applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Mounting Micrometer Planparallel Measuring Faces Spindle 5mm, 0.01mm Resolution - Metav IndustryLine
Take advantage of a compact, 0–13 mm measuring range combined with a fully hardened spindle and fine 0.5 mm pitch for reliable inset measurement in confined assemblies; order the instrument directly via Metav Werkzeuge or request tailored advice from our consultants. M303.115 Built-in micrometer — 0–13 mm range, 5 mm spindle M303.115 is an inset micrometer screw gauge designed for integration into fixtures and measuring stations, delivering precise short-range measurement where space and repeatability are critical. Compact built-in micrometer for tight spaces Plan-parallel measuring faces for consistent contact Fully hardened spindle with matt chrome sleeve Fine 0.5 mm spindle pitch for precise adjustment Precision in confined spaces that supports reliable quality control This inset micrometer is classified in the micro category (max measuring range 10–100 mm) and is optimised for fine mechanical tasks such as microcomponents, watchmaking and delicate fixture work. The 0–13 mm range provides the shortest practical span for highly repeatable results, while the 5 mm spindle diameter and 0.5 mm spindle pitch ensure smooth, controllable advance. With an analog reading resolution of 0.01 mm, the device balances easy vernier interpretation with workshop robustness — a solution where rapid, repeatable stops and starts in production measurement are required. Robust construction to reduce downtime and maintain accuracy Mechanical reliability is a primary benefit of the construction: the spindle is fully hardened and the thimble is matt chrome-plated, reducing wear and glare in daily use. The plan-parallel measuring faces deliver even contact pressure and consistent seating on small parts, which lessens operator variability and accelerates inspection routines. These characteristics translate into fewer recalibrations and a longer service life for routine in-line measurement points, supporting continuous production with minimal interruption. Designed for integration and practical handling on the shop floor The inset format allows direct mounting into gages, fixtures or machine housings, converting the screw gauge into a fixed measuring point inside a system rather than a handheld instrument. At a compact length of 59 mm and a mass of 0.1 kg, the unit minimises added bulk and simplifies installation. The analogue mechanism with fine pitch gives tactile feedback appreciated in assembly and testing environments, while the clear scale enables quick checks without additional electronics — an economical approach to precision where full digital integration is not required. Contact Metav Werkzeuge for personalised integration advice and secure the Metav IndustryLine M303.115 for precise inset measurement in confined assemblies. Technical data Article number: M303.115 GTIN: 4054469115689 Category: Micrometer screw gauge (inset) Designation: Built-in micrometer 0–13 mm Core specifications Measuring range: 0–13 mm Resolution: 0.01 mm Spindle diameter: 5 mm Spindle pitch: 0.5 mm Length: 59 mm Weight: 0.1 kg Materials & features Spindle fully hardened Thimble matt chrome-plated Plan-parallel measuring faces Analog reading (vernier) Suitable for fine mechanical / micro measurements FAQ What applications suit this inset micrometer? This inset micrometer is ideal for fine mechanical tasks, microcomponents and fixtures where the 0–13 mm range and compact design meet space and repeatability requirements. How precise is the measurement on this instrument? The device offers a reading resolution of 0.01 mm, with a fine 0.5 mm spindle pitch providing controlled, repeatable adjustment for small-range measurements. Is the spindle corrosion-resistant and durable? The spindle is fully hardened and the thimble is matt chrome-plated, which improves wear resistance and reduces surface glare during repeated production checks. Can this instrument be mounted in a fixture or machine? Yes, the design is intended for built-in installation, enabling integration into gauges, jigs or measuring stations for fixed-point inspection. Which manufacturer and product line delivers this micrometer? The M303.115 is supplied under the Metav IndustryLine range and is distributed via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Depth Gauge, Flat-Parallel Measuring Faces, 5mm Spindle, 0.01mm Graduation - Metav IndustryLine
Take advantage of a compact, micro‑range measuring solution that combines precise 0–15 mm range, a fully hardened spindle and a matt‑chrome drum for durable, repeatable results; order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Built‑in micrometer M303.120 — 0–15 mm range, hardened spindle The Built‑in micrometer M303.120 is a compact, micro‑range mechanical micrometer designed for precise thickness and detail measurements in fine mechanical, instrument and small‑component applications. Micro-range 0–15 mm for fine measurements Fully hardened spindle, matt‑chrome drum Mechanical reading with 0.01 mm graduation Compact 61 mm length, weight 0.1 kg Precision for miniature work and reliable readings The micrometer is built for micro‑range measurement tasks where repeatability matters. With a measuring range of 0–15 mm and a reading of 0.01 mm, the instrument delivers the fine resolution expected in precision workshops and instrument making. The spindle is fully hardened, which preserves the measuring geometry under repeated use, while the matt‑chrome drum reduces reflections and wear. The compact body (approx. 61 mm) and low mass (0.1 kg) make the device easy to mount and handle in confined setups without sacrificing stability. These characteristics support consistent measurements and faster inspection cycles in small‑part production. Robust construction for repeatable results Mechanical design choices focus on durability and clarity of indication. The spindle geometry and spindle pitch 0.5 mm ensure smooth, predictable travel per turn, while the plan‑parallel measuring faces provide flat contact surfaces for accurate thickness readings. As a mechanical micrometer with an analogue scale, the instrument avoids electronic dependencies and is therefore well suited to environments where simple, long‑term reliability is required. The hardened spindle and chrome finish on the drum resist corrosion and surface damage, maintaining measurement integrity over long service periods. Integration, handling and application benefits Engineered as a built‑in or panel‑mountable measuring element, this micrometer is ideal where space is limited yet high precision is needed—examples include gauge fixtures, small jigs and instrument calibration benches. Its compact form factor and mechanical operation mean that no power supply is required, simplifying installation and reducing points of failure. The combination of hardened components and a clear 0.01 mm scale supports both routine quality control and finer inspection tasks, making it a reliable choice for workshops, toolrooms and small‑series production. Contact Metav Werkzeuge today to request advice on fitting the M303.120 built‑in micrometer into existing gauges or fixtures and to obtain procurement support from our Emmerich specialists Technical data SKU: M303.120 GTIN: 4054469115696 Category: Messschrauben Label: Einbaumess, 15 mm, planparallel MB 0 - 15 mm, Spindel 5 mm Brand: Metav IndustryLine Operation: Mechanical (analogue) Key measurements Measuring range: 0–15 mm Resolution / reading: 0.01 mm Spindle diameter: 5 mm Spindle pitch: 0.5 mm Length: 61 mm Weight: 0.1 kg Zolltarifnummer: 90173000 Special features Spindle fully hardened Drum matt‑chrome plated Plan‑parallel measuring faces Compact built‑in design for fixtures Mechanical micrometer, analogue reading Classification: Micro (0–100 mm), micro‑range at 0–15 mm FAQ What is the measuring range of this instrument? The measuring range is 0–15 mm; the M303.120 built‑in micrometer from Metav IndustryLine is intended for micro‑range tasks. What resolution can be read on the scale? The mechanical scale provides a reading resolution of 0.01 mm for fine, repeatable indication. Are the measuring faces flat and aligned? Yes — the device features plan‑parallel measuring faces to ensure flat, reproducible contact during measurements. What materials are used for the spindle and drum? The spindle is fully hardened for wear resistance and the drum is matt‑chrome plated to reduce surface wear and glare. In which workshop applications is this micrometer best used? The micrometer is suited to fine mechanical work, instrument making and small‑component inspection where a compact, accurate built‑in measuring element is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Mounting Dial Gauge Ball Tip Spindle 5mm 0.01mm Graduation 0.5mm Pitch - Metav IndustryLine
Take advantage of the combination of compact inset design, micrometre‑grade 0–15 mm measuring range and reliable mechanical read‑off for precise small‑part inspection. Order the micrometer directly via Metav Werkzeuge or ask the consultants for integration advice. M303.121 Inset Micrometer (0–15 mm) — Analogue, Spherical Faces The M303.121 is an inset analogue micrometer for fine mechanical measurement tasks, designed to be mounted into fixtures for repeatable short‑range inspection up to 15 mm. Analogue reading with 0.01 mm graduation Fully hardened spindle for long-term accuracy Matt‑chrome drum for glare‑free read-off Spherical measuring faces for reliable contact Precision where space is limited This inset micrometer is tailored for minimal‑space measuring tasks where precision and compactness matter. Classified in the micro range (maximum measuring range up to 100 mm), the instrument covers 0–15 mm with a reading step of 0.01 mm, enabling clear, fine graduations on the thimble for vernier‑style or barrel read‑off. The short overall form factor keeps leverages and bending moments low, which benefits repeatability when the device is integrated into fixtures or small gauges. Suitable for fine mechanical workshops, instrument making and component inspection, the compact construction preserves stiffness where centimetre‑scale tools would be oversized. Reliable contact and long‑term repeatability Mechanical design choices reduce drift and maintain measurement integrity: the fully hardened spindle resists wear, while the matt‑chrome drum reduces reflection for easier reading under workshop lighting. The spindle advances with a 0.5 mm pitch, meaning each full rotation corresponds to 0.5 mm axial travel; combined with the fine graduation this yields consistent, predictable displacement per division. The spherical measuring faces ensure stable point contact on slightly curved surfaces and reduce tilting errors during clamping, so results remain reproducible across repeated checks. Integration into fixtures and common applications As an inset micrometer with an analogue mechanism, the unit is designed for straightforward installation into measuring jigs, custom fixtures or test benches where a flush or protected mounting is required. The compact length (61 mm) and robust contact geometry make it useful for watchmaking, precision turning, and small‑scale quality control where fast, repeatable checks are needed. The mechanical read‑off removes dependency on batteries or electronics, offering a low‑maintenance solution for long‑term shop‑floor use while still delivering micrometre‑level resolution and reliable handling. Contact Metav Werkzeuge to discuss integration options for the M303.121 inset micrometer and arrange supply directly from Emmerich. Technical Data Article number: M303.121 GTIN: 4054469115702 Eclass: 21170330 Facts Measuring range: 0–15 mm Resolution / reading: 0.01 mm Spindle diameter: 5 mm Spindle pitch: 0.5 mm Length: 61 mm Customs tariff number: 90173000 Special features Analogue micrometer (mechanical) Spherical measuring faces Spindle fully hardened Matt‑chrome plated drum Category: Micrometers (inset) FAQ What is the measuring range and resolution of this micrometer? The M303.121 inset micrometer measures from 0 to 15 mm with a reading resolution of 0.01 mm, suitable for fine‑scale inspection tasks. Are the measuring faces suitable for curved surfaces? Yes. The spherical measuring faces on the M303.121 provide stable point contact on slightly curved or irregular surfaces, improving repeatability for such geometries. How is the spindle protected against wear? The spindle is delivered fully hardened and is paired with a matt‑chrome drum to reduce surface wear and reflection, preserving long‑term accuracy. Can the micrometer be mounted into fixtures? The inset design is specifically intended for integration into gauges and fixtures; the compact body and mounting format simplify installation for repetitive testing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Bench Tablet Micrometer Non‑Rotating Spindle, Colour Touchscreen, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
Take advantage of the combination of sub-micron measurement capability, robust CNC-machined aluminium housing and Industry 4.0-ready data connectivity for reliable laboratory-grade results. Order or request technical clarification via Metav Werkzeuge for a seamless integration into existing inspection workflows. Insertion micrometer by Microtech Metrology — 0–25 mm, 2.4" colour touchscreen Insertion micrometer designed for bench and laboratory measurement applications, offering high-resolution digital readout and multiple industrial data interfaces. Sub-micron accuracy, resolution 0.0001 mm Non-rotating spindle for repeatable contact Wireless + USB data transfer options 2.4" colour touchscreen with 2000-value memory Exceptional measurement precision for repeatable results The bench instrument delivers a resolution of 0.0001 mm and a stated accuracy of 0.0015 mm, making it suitable where fine tolerances must be documented and repeated. The non-rotating spindle reduces measurement variation caused by spindle rotation and ensures that contact geometry remains consistent across successive measurements. For workshops and metrology labs that require compact, high-precision tools, this device provides a stable measuring interface that combines mechanical design with digital control, reducing operator influence on results. Industry 4.0 connectivity that streamlines data handling Equipped with a computerized MICS system, the instrument supports wireless and USB data transfer modes, wireless HID, and MODBUS RTU output for direct integration into production data systems. A dedicated wireless measuring hub and synchronization options allow multiple instruments to feed a central database or the MDS application on Windows, Android, iOS and macOS. The onboard memory manager stores up to 2000 values with folder organisation and basic statistics, enabling secure local logging before or during data export and reducing manual transcription errors. Designed for practical workshop and laboratory use The housing is a CNC-machined solid aluminium block, chosen for dimensional stability and thermal behaviour under bench conditions. A 2.4" colour touchscreen provides immediate visual feedback, on-line graphs and easy access to functions such as Go/NoGo, Max/Min, formula input and temperature correction. Bench configuration and a non-rotating spindle make the device comfortable for routine use, while features like linear correction and timer enhance repeatability and traceability for quality checks and test protocols. Calibrated delivery and suitable application range This micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA), confirming laboratory traceability and allowing direct use in regulated inspection routines. With a measuring range of 0–25 mm, the instrument falls into the micro category for calipers and micrometres (compact tools for fine mechanical work), where short measuring faces and high stiffness are an advantage for small parts and precision components. The combination of factory calibration and documented accuracy supports implementation in both production control and laboratory environments. Contact Metav Werkzeuge to discuss integration, calibration details and how Microtech Metrology’s insertion micrometer with ISO 17025 certification can enhance measurement reliability at your site Technical data Article number: 110180288 GTIN: 4061905040757 Brand: Microtech Metrology Measuring range: 0–25 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Core specifications Resolution: 0.0001 mm Accuracy: 0.0015 mm Memory capacity: 2000 values Modes: Go/NoGo, Max/Min, Formula, Timer, Temperature correction Special features Non-rotating spindle MICS computerized system Wireless measuring hub and synchronization MODBUS RTU (RS-485) industrial output CNC-machined solid aluminium housing Bench configuration for laboratory use 4 data-transfer modes (Wireless to MDS app, Wireless HID, Wireless HID+MAC, USB HID) FAQ What measuring range does the instrument cover and what class does it belong to? The insertion micrometer covers 0–25 mm and is classified in the micro category for compact precision instruments suited to fine mechanical and small-part measurement. Is the device supplied with a calibration certificate? Yes. The Microtech Metrology insertion micrometer (SKU 110180288) is delivered with an ISO 17025 calibration certificate (Ilac MRA) for traceable measurement results. How can measurement data be exported from the instrument? Data can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, Wireless HID+MAC or by USB HID; MODBUS RTU is also available for industrial systems. Does the spindle rotate during measurement and why is that important? The spindle is non-rotating, which preserves contact geometry and improves repeatability compared with rotating-spindle designs, reducing operator-induced variation. What laboratory and workshop features aid everyday use? The instrument offers a 2.4" colour touchscreen, on-line graphics, Go/NoGo, Max/Min functions, linear and temperature correction, plus a 2000-value memory for organised logging. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Bench-Mount Digital Test Micrometer Colour Touchscreen, ISO 17025 Calibration Wireless+USB - Microtech Metrology
Take advantage of sub-micron measurement, a 2.4" colour touchscreen and full Industry 4.0 data connectivity to speed up inspection cycles with consistent, auditable results; order the built-in micrometer directly via Metav Werkzeuge or contact our consultants for integration advice. Built-in micrometer by Microtech Metrology — 2.4″ colour touchscreen, wireless data The built-in micrometer from Microtech Metrology delivers sub-micron measurement and bench‑style operation for laboratory and production use, combining a compact measurement range with advanced digital connectivity. Sub-micron resolution, 0.0001 mm readout 2.4″ colour touchscreen for quick operation Wireless and USB data transfer, MDS/MAC support Delivered with ISO 17025 calibration certificate Reliable sub-micron measurement for fine components The instrument is built for precise tasks: with a measuring range of 0–25 mm, it falls into the micro class for compact, high‑precision gauges—ideal for watchmaking, micro‑parts and small assemblies where short jaws reduce torsion. The readout resolution of 0.0001 mm enables sub‑micron discernment, while the stated accuracy of 0.0015 mm defines the traceable tolerance users can rely on during inspection. These figures translate into consistent go/no‑go decisions and fewer reworks when used in quality control routines. Streamlined data workflow and Industry 4.0 readiness Data handling is designed for modern metrology: the unit supports wireless and USB transfer, Wireless HID, MDS app connectivity and MODBUS RTU (RS‑485) for integration into PLCs or process controllers. The built‑in memory manager stores up to 2000 values with folder and statistics support, while the MICS system and measuring hub enable synchronisation of multiple instruments. For production environments this means faster documentation, reduced manual transfer errors and direct input to statistical process control. Lab‑grade construction and verified calibration Finished in a CNC‑machined solid aluminium housing, the micrometer is configured for bench use and frequent handling. The 2.4" colour touchscreen and graphical functions (max/min, formula, temperature correction) simplify routine measurements and visualise trends immediately. The tool is supplied with an ISO 17025 calibration certificate (Ilac MRA), which ensures the delivered instrument is traceable and ready for formal quality systems; this certificate also reduces setup time for accredited inspection processes. Contact Metav Werkzeuge for application advice and to specify the Microtech built-in micrometer (SKU 110180278) with ISO 17025 calibration for laboratory or production integration Technical data Article number: 110180278 GTIN: 4061905041174 Manufacturer: Microtech Metrology Category: Micrometer / Bench micrometer Facts Measuring range: 0–25 mm Readout resolution: 0.0001 mm Stated accuracy: 0.0015 mm Memory capacity: 2000 values Special features 2.4" colour touchscreen Wireless and USB data transfer (MDS/HID/MAC) MODBUS RTU (RS‑485) output for industrial connections MICS system and measuring hub synchronisation CNC‑machined aluminium housing ISO 17025 calibration certificate included Bench configuration for laboratory use FAQ What measuring range and resolution does the instrument offer? The device covers 0–25 mm with a readout resolution of 0.0001 mm and a stated accuracy of 0.0015 mm, positioning it in the micro class for compact, high‑precision measuring tasks. Is the micrometer delivered calibrated? Yes — the built‑in micrometer from Microtech Metrology is supplied with an ISO 17025 calibration certificate (Ilac MRA), confirming traceability and suitability for accredited inspection workflows. How can measurement data be exported from the instrument? Measurement data can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, USB HID and by MODBUS RTU (RS‑485) for direct industrial integration. Can the unit be used in an Industry 4.0 environment? Yes — the MICS system, measuring hub functions and MODBUS output enable synchronisation, live graphs and direct connection to process systems for automated data collection. What construction and interfaces support everyday workshop use? The micrometer features a CNC‑machined aluminium housing, a 2.4" colour touchscreen and a robust bench configuration suitable for repeated measurements and uninterrupted lab workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Built-In Indicator 0.001mm Parallax-Free Spindle 6.5mm Plan-Parallel - Metav IndustryLine
Take advantage of the combination of sub‑micrometre resolution, compact installation design and a parallax‑free scale to maintain reproducible measurements on small components; order through Metav Werkzeuge or consult the team for integration advice. M303.141 – Precision micrometer head with 25 mm range and 0.001 mm resolution The M303.141 is a compact precision micrometer head designed for built‑in measurement tasks and fine mechanical inspection across a 0–25 mm range. 0.001 mm resolution for high‑precision work Parallax‑free scale for reliable readings Mountable design with spindle Ø 6.5 mm Precision where size matters This built‑in precision micrometer head delivers a 0.001 mm (1 µm) graduation, making it suitable for demanding small‑part measurement where repeatability is essential. Classified in the micro range for measuring tools (max. range within 10–100 mm), the instrument combines a compact footprint with mechanical refinement that benefits watchmaking, precision engineering and small‑batch component inspection. The analogue format keeps the measuring principle simple while offering fine control over adjustments, helping to reduce setup time and increase throughput in routine quality checks. Engineered for dependable installation and reading Designed as a mounting micrometer, the device features a parallax‑free reading system and plan‑parallel measuring faces, which reduce operator error and improve comparability between measurements. The compact spindle Ø 6.5 mm and matt chrome‑plated drum contribute to corrosion resistance and long‑term stability under workshop conditions. These mechanical attributes allow easy integration into fixtures or test jigs where consistent contact geometry and low wear extend service intervals and reduce rework. Practical benefits for inspection and production control The unit supports precise dimensional verification of small assemblies and components, providing a clear benefit to inspection routines that demand micron‑level granularity. The robust scale and mounting‑ready form factor mean the head is suited for repetitive tasks on benches or within semi‑automated test stations, improving measurement consistency across operators. The combination of compact mounting, fine resolution and durable finishing helps to simplify quality workflows and supports faster decision‑making in production or lab environments. For tailored advice on integrating the M303.141 into inspection stations or fixtures, contact Metav Werkzeuge for technical guidance and order support. Technical data Article number: M303.141 GTIN: 4054469115733 ECLASS: 21170330 ETIM: EC003590 Tariff number: 90173000 Core specifications Measuring range: 0–25 mm Resolution: 0.001 mm (1 µm) Spindle diameter: 6.5 mm Type: Analog Special features Parallax‑free scale Plan‑parallel measuring faces Matt chrome‑plated drum Category: Micrometer screw gauge (micrometer head) FAQ What measuring tasks is this micrometer head best suited for? The M303.141 excels at precise measurement of small components within a 0–25 mm range, making it ideal for fine mechanical parts, watch‑type components and detailed inspection tasks where 1 µm resolution is required. Is the scale easy to read under workshop lighting? Yes; the parallax‑free scale and matt chrome‑plated drum improve legibility and reduce reading errors during repetitive measurements with the M303.141. Can the micrometer head be mounted into fixtures or test jigs? The compact mounting form with a spindle diameter of 6.5 mm and built‑in design allows straightforward integration into fixtures and semi‑automated test arrangements. Are the measuring faces suitable for delicate surfaces? The instrument is supplied with plan‑parallel measuring faces that ensure even contact and repeatable bearing, helping to protect and reliably measure delicate surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Built-In Micrometer Head Rotating Spindle, Touchscreen 2.4" IP65, ISO 17025 Cal Cert - Microtech Metrology
Benefit from a compact, installation-ready micrometer that combines ISO 17025 traceable calibration, a 2.4" touchscreen and robust IP65 protection for reliable inline measurement. The device delivers high-precision readings (±0.0015 mm) across a 0–25 mm range and integrates smoothly with factory data systems — order directly via Metav Werkzeuge or ask our consultants for application advice. Built-in micrometer head by Microtech Metrology — 2.4" touchscreen, Wireless + USB HID The Built-in micrometer head is a compact installation micrometer designed for inline dimensional control and process monitoring in production and test fixtures ISO 17025 calibrated with certificate included 2.4" touchscreen display for clear readings Wireless and USB HID data output IP65 aluminium housing, CNC machined High precision with traceable calibration for repeatable results The installation micrometer is delivered fully calibrated to ISO 17025, with a calibration certificate included, ensuring measurement traceability and acceptance in quality audits. Classified in the micro range for gauges up to 0–25 mm, the unit gives a consistent ±0.0015 mm accuracy that reduces rework and inspection time. The combination of a compact measuring span and tight tolerance control makes this instrument suitable for fine mechanical components and short-stroke production checks where stiffness and reproducibility matter. Seamless data workflow and Industry 4.0 readiness Equipped for modern data handling, the unit supports Wireless, USB HID and wireless HID+MAC modes, plus optional MODBUS RTU for industrial networks. Onboard functions include online graphics, Go/NoGo, Max/Min, linear and temperature correction, and a memory manager with storage for 2000 values organised in folders. The result is a measurable reduction in manual data entry and faster feedback into SPC systems — ideal where digital traceability and automated logging are required. Robust installation design for production environments The sensor is housed in a CNC-machined aluminium block and rated IP65 for protection against dust and jetting liquids, enabling reliable use at the machine interface. The rotating spindle supports flexible probe orientations, while probe mode and compensation routines maintain accuracy across temperature changes. Together these features create a dependable, low-maintenance measurement point for inline thickness checks, fixture monitoring or assembly control without frequent recalibration. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Microtech Metrology built-in micrometer head, delivered with ISO 17025 calibration and certificate — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 110180029 GTIN: 4061905456589 Manufacturer: Microtech Metrology Model: Built-in micrometer head Display: Touchscreen 2.4" Data output: Wireless + USB Core specifications Measuring range: 0–25 mm Resolution: 0.0001 mm Accuracy: ±0.0015 mm Protection class: IP65 Memory capacity: 2000 values Special features Delivered with ISO 17025 calibration certificate (Ilac MRA) Wireless instrument connection and synchronization Wireless HID, Wireless HID+MAC and USB HID modes Optional MODBUS RTU data output (RS-485) Online graphic, 2D graph and statistics mode Go/NoGo, Max/Min, formula and timer functions Linear correction and temperature compensation CNC-machined aluminium housing Rotating measuring spindle Probe mode and compensation routines Memory folders and data transfer functions FAQ What measuring range and accuracy does the unit offer? The built-in micrometer head from Microtech Metrology covers a 0–25 mm range with an accuracy of ±0.0015 mm, suited to fine production control and precision inspection. Is the device delivered calibrated? Yes — the instrument is supplied fully calibrated and includes an ISO 17025 calibration certificate for traceable documentation. Which interfaces are available for data transfer? Data can be transferred via Wireless, USB HID and wireless HID+MAC; an optional MODBUS RTU output is available for industrial integration. Can the device be used at the machine interface? The CNC-machined aluminium housing with IP65 protection and rotating spindle is designed for installation at the machine or fixture for inline monitoring. How much data can be stored locally? The internal memory manager holds up to 2000 values, organised in folders with statistics and exportable data for process control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Dial Indicator With Large 29mm Drum, 100-Division, 8mm Spindle, Ratchet, DIN 863 - Metav IndustryLine
Take advantage of the combination of precise 0–25 mm measuring range, a carbide spindle and a large 29 mm drum for fast, reliable readings in fine‑mechanical production. Order the instrument directly via Metav Werkzeuge or ask the consultants for installation details and availability. M303.161 built-in micrometer — 0–25 mm, large 29 mm drum (Metav IndustryLine) The M303.161 is a built‑in micrometer designed for precise 0–25 mm measurements in workshop and production environments. Large 29 mm drum for clear reading Carbide spindle for long wear resistance 0–25 mm range with 0.01 mm resolution Consistent metrology for small, critical parts This built‑in measuring screw delivers repeatable accuracy through a combination of a calibrated 1 mm spindle pitch and a finely divided scale. The 0.01 mm reading is achieved by the 100 division drum on a 1 mm pitch, which means every full spindle revolution corresponds to 1 mm axial travel and each drum graduation to 0.01 mm. The integrated ratchet mechanism controls measuring force to reduce operator‑induced variation, improving reproducibility for small components and quality‑control tasks. Built to stay precise under shop conditions Designed for longevity, the instrument features a carbide spindle and plan‑parallel measuring faces, reducing wear where it matters most. The large 29 mm drum improves legibility and speeds up repetitive inspection cycles, while the robust construction and an 8 mm spindle diameter contribute to mechanical stability during frequent use. Compliance with DIN 863 provides a clear reference for manufacturing tolerances and acceptance criteria in production environments. Easy integration and application‑specific benefits Classified in the micro category for its 0–25 mm range, this device is ideal for fine mechanical work such as small assemblies, precision fixtures or watchmaker tasks where compact size and high resolution are required. The 1 mm pitch and 100 divisions simplify interpretation of readings and make training straightforward for operators. As a built‑in variant, the unit suits panel or fixture integration where a permanent or semi‑permanent measuring point is needed, helping to streamline in‑line checks and reduce handling time. Contact Metav Werkzeuge today to discuss how the M303.161 built‑in micrometer can be integrated into production — technical consultants at Metav Werkzeuge are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M303.161 GTIN: 4054469115757 Label: Einbau‑Mess, 25 mm, große Trommel MB 0 - 25 mm, 100er Teilung, Spindel 8 mm Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution / reading: 0.01 mm Spindle diameter: 8 mm Spindle pitch: 1 mm Drum diameter: 29 mm Weight: 0.3 kg Special features Analog instrument Ratchet drive for constant measuring force Carbide spindle Plan‑parallel measuring faces DIN 863 compliant 100 divisions on drum eClass: 21170330 ETIM: EC003590 FAQ What measuring range does this instrument cover? The M303.161 built‑in micrometer covers a 0–25 mm range, making it suitable for micro‑range inspections and fine mechanical components. How fine is the graduation and how is it achieved? The instrument provides a 0.01 mm reading via a 1 mm spindle pitch combined with 100 divisions on the large drum, so each drum graduation equals 0.01 mm. Is the spindle durable for frequent shop use? Yes. The carbide spindle fitted to the M303.161 improves wear resistance and maintains accuracy over extended use in production environments. Can the micrometer be mounted in a fixture or panel? As a built‑in version, the M303.161 is intended for integration into fixtures or panels where a permanent measuring point is required, supporting inline checks and repeatable placement. Which standard does this measuring instrument comply with? The device is manufactured in accordance with DIN 863, providing a recognised baseline for mechanical micrometer dimensions and tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Inset Micrometer 0–25mm 0.001mm Resolution Carbide Faces Ratchet, DIN 863 - Metav IndustryLine
The combination of 0–25 mm measuring range, 0.001 mm resolution and carbide measuring faces delivers reliable repeatability and low wear for fine-component inspection; benefit from precise, compact measuring in production or quality control. Order the M302.091.C directly via Metav Werkzeuge or consult our advisors for integration advice. M302.091.C – Digital inset micrometer, 0–25 mm, 0.001 mm resolution (Metav IndustryLine) A compact digital inset micrometer designed for precise axial measurements in small components and assembly fixtures, ideal where space is limited and repeatable contact force is required. 0–25 mm measuring range Resolution 0.001 mm Carbide measuring faces, plan-parallel Ratchet spindle for reproducible contact force Precision where small tolerances matter This inset micrometer is engineered for applications that demand fine resolution and consistent results. With a resolution of 0.001 mm and a stated accuracy of 0.004 mm, the instrument supports micro‑level inspection tasks typical in precision engineering and small-part production. The ratchet spindle ensures a constant measuring force, reducing operator influence on results and improving reproducibility over repeated measurements. Classified in the micro measuring group (compact range), it is especially suited to delicate assembly, small-batch finishing and precision inspection stations. Fast readout and traceable data transfer The integrated digital readout provides straightforward operation via ON/OFF, ABS/INC, UNIT and SET keys, enabling quick changes between measuring modes. For automated data collection and traceability, the unit includes RB 4.1 data output, allowing straightforward connection to inspection systems or data loggers. This combination of clear visual feedback and digital interfacing reduces processing time during quality checks and simplifies documentation of measured values for production records. Robust contact surfaces and standards compliance Measuring faces are made of carbide and are plan‑parallel, offering high wear resistance and long service life even under frequent use. The design follows DIN 863 guidelines for micrometre construction, which assures compatibility with workshop procedures and expectations. The compact body and a 12 h7 mounting provision make the instrument easy to integrate into fixtures or measuring rigs, while the modest weight contributes to convenient handling at inline or bench inspection stations. Practical benefits for workshop and inspection teams Compact dimensions combined with a precise spindle diameter support reliable measurements in confined spaces and in fixtures where repeatability is crucial. The unit’s features deliver clear practical advantages: reduced rework through more accurate checking, faster throughput thanks to digital readout and data output, and lower lifetime costs because of the carbide measuring faces that resist deformation and wear. These benefits make the instrument a solid choice for production monitoring, incoming inspection and laboratory use. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M302.091.C inset micrometer can be integrated into existing inspection workflows or to request specification support and a tailored quotation Technical data Article number: M302.091.C GTIN: 4054469114507 Category: Micrometers (messschrauben) ECLASS: 21170330 ETIM: EC003590 Tariff number: 90173000 Norm: DIN 863 Core technical data Measuring range: 0–25 mm Resolution (reading): 0.001 mm Accuracy: 0.004 mm Weight: 0.5 kg Measuring spindle diameter: 6.5 mm Mounting: 12 h7 Special features Measuring faces: carbide, plan-parallel Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Ratchet spindle for reproducible contact pressure Compact inset design for fixture integration FAQ What measuring range and resolution does this instrument offer? The M302.091.C provides a 0–25 mm measuring range with a 0.001 mm resolution, making it suitable for fine metrology tasks and small-component inspection. Are the measuring faces wear‑resistant for high-volume use? Yes, the micrometer is fitted with carbide measuring faces that are plan‑parallel, offering high resistance to wear and consistent contact geometry over lengthy inspection cycles. How is repeatable contact force achieved? A built‑in ratchet spindle controls the final approach, ensuring uniform contact pressure and improved repeatability across multiple measurements. Can measurement data be transferred to a PC or logging system? The instrument features an RB 4.1 data output, enabling connection to data acquisition systems or inspection software for traceability and statistical analysis. Is the micrometer compliant with recognised standards? Construction and dimensional criteria follow DIN 863, providing conformity with common workshop and inspection standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer Stationary Spindle 0–25mm 0.001mm Resolution 5mm Anvil Hole, IP65 - Metav IndustryLine
Take advantage of the micrometre's combination of compact installation, high resolution and consistent contact control for reliable inline measurements; order the unit directly via Metav Werkzeuge or consult the Metav team for integration advice. Digital Built-in Micrometer M302.091.S — 0–25 mm, 0.001 mm resolution (Metav IndustryLine) Digital Built-in Micrometer M302.091.S is a compact, fixture-mounted measuring device intended for precise linear measurements in fine mechanical and production environments. Resolution 0.001 mm for fine grading Accuracy ±0.004 mm for reproducible results Non-rotating spindle with ratchet control Ø 5 mm bore for gauge insert mounting Precision suited to fine mechanical installation The built-in micrometer offers a measuring range of 0–25 mm and a reading resolution of 0.001 mm, delivering repeatable sub-millimetre discrimination within a compact envelope. Classified in the Micro category (max. 10–100 mm), this size class prioritises minimal deflection and high rigidity at short spans, making the instrument particularly suitable for fixture integration and fine mechanical assemblies. The specified accuracy ±0.004 mm provides a verifiable basis for quality control tasks that demand consistent tolerances rather than laboratory-only ultra‑precision. Mechanical features that secure consistent contact Designed for inline mounting, the micrometre includes a non-rotating spindle and an integrated ratchet, both of which contribute to stable and repeatable contact force during measuring cycles. The measuring faces are plan‑parallel and incorporate a Ø 5 mm bore for gauge inserts, enabling simple replacement or customisation for special anvils. A 12 h7 mounting interface facilitates precise alignment in fixtures. These mechanical characteristics reduce operator‑dependent scatter and simplify use within automation or jigged setups, improving throughput and traceability in production. Digital interface and shop‑floor compatibility The device features a digital readout with ON/OFF, ABS/INC, UNIT and SET functions and an RB 4.1 data output for transfer to SPC or machine control systems, supporting modern data collection workflows. The construction and interface are chosen to balance immediate readout convenience with programmable data export for process monitoring. The instrument’s modest mass (0.5 kg) eases handling during assembly into machines or gauges while maintaining the rigidity required for repeatable results. Metav IndustryLine’s distribution from Emmerich acts as a quality filter for European workshops, ensuring consistent product checks before shipment. For fixture-level precision choose the Metav IndustryLine built-in micrometer and contact Metav Werkzeuge for integration guidance and delivery from Emmerich; the Metav team will advise on mounting and data interfacing to match production requirements. Technical Data Article number: M302.091.S GTIN: 4054469114521 Category: Messschrauben Mounting: 12 h7 Facts Measuring range: 0–25 mm Reading resolution: 0.001 mm Accuracy: 0.004 mm Weight: 0.5 kg Measuring face bore diameter: Ø 5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Non-rotating spindle Ratchet for constant measuring force Measuring faces plan-parallel with Ø 5 mm bore for gauge inserts Designed as built-in/fixture micrometre FAQ What is the measuring range and resolution of this micrometre? The Digital Built-in Micrometer M302.091.S measures from 0 to 25 mm with a resolution of 0.001 mm and an accuracy of ±0.004 mm. Can the instrument be connected to data logging systems? Yes, the device provides an RB 4.1 data output for connection to SPC systems or machine interfaces. How does the ratchet and spindle design improve measurement consistency? The non-rotating spindle combined with a ratchet mechanism on the Metav IndustryLine micrometre ensures consistent contact force and reduced operator influence, resulting in more reproducible measurements. Is the micrometre suitable for fixture mounting? The unit is a built-in type with a 12 h7 mounting interface and plan-parallel faces with a Ø 5 mm bore for gauge inserts, making it suitable for secure fixture integration. What are the display functions available on the readout? The digital display includes ON/OFF, ABS/INC, UNIT and SET buttons for straightforward measurement mode selection and zeroing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Thimble Micrometer With Carbide Faces, 0.001mm Resolution, Ratchet Stop, DIN 863 - Metav IndustryLine
Take advantage of precise machine integration, 1 µm display resolution and wear‑resistant carbide measuring faces for dependable in‑process inspection; order directly via Metav Werkzeuge or consult our technical team for configuration and delivery. Digital built-in micrometer M302.091.G — 0.001 mm resolution, carbide measuring faces (Metav IndustryLine) The Digital built-in micrometer M302.091.G is a compact, machine‑mountable micrometer designed for high‑precision shop and production measurement with a 12 h7 mounting shank for secure installation Digital display with mm/inch and hold Resolution 0.001 mm for fine measurement Carbide measuring faces for long life Mounting shank 12 h7 for machine fitting Precise measurement that reduces rework and speeds inspection The instrument delivers a resolution of 0.001 mm and a stated accuracy of 0.004 mm, meeting the expectations for fine metrology in small‑part production. Conformity with DIN 863 ensures comparability with established workshop standards. The fine resolution is shown on a three‑button digital display with ON/zero, mm/inch and HOLD functions, enabling quick verification of components and limiting stoppages due to uncertain readings. For assembly and quality control tasks where repeatable measurements shorten cycle time, this inset micrometer gives a measurable productivity uplift. Built for straightforward integration and repeatable force control Designed for machine or fixture integration, the device features a 12 h7 mounting shank and an RB 4 data output for connection to SPC systems or counters, simplifying digital traceability in the production line. A built‑in ratchet mechanism guarantees a consistent measuring force on each contact, reducing operator‑induced variation and improving process stability. Clear data transfer and repeatable actuation together support automated logging and faster decision making on the shop floor. Durable contacts and workshop‑grade construction for long service life Measuring faces are carbide (HM) and plan‑parallel, chosen for wear resistance and dimensional stability under frequent use. The measuring spindle diameter of 6.5 mm and a compact 0–25 mm range place the tool in the micro range for precision tasks on small components, where stiffness and handling are essential. With a practical weight of 0.5 kg and a construction that complies with proven metrology norms, the unit is suitable for continuous inspection routines and robust enough for daily shop use. Metav IndustryLine’s market presence and logistical filter in Emmerich ensure dependable supply and product consistency. Choose Metav IndustryLine’s M302.091.G for accurate machine integration and contact Metav Werkzeuge for tailored configuration and reliable delivery Technical Data Article number: M302.091.G GTIN: 4054469114514 Manufacturer: Metav IndustryLine Norm: DIN 863 eCl@ss: 21170330 ETIM: EC003590 Facts Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: 0.004 mm Weight: 0.5 kg Measuring spindle: 6.5 mm Special features Carbide measuring faces (HM) Plan‑parallel measuring faces Mounting shank: 12 h7 Digital display with ON/zero, mm/inch, ABS and HOLD Data output: RB 4 Ratchet mechanism for repeatable measuring force FAQ What measuring range does this micrometer cover? The built‑in micrometer covers 0–25 mm, suitable for micro‑range precision checks and small component inspection with Metav IndustryLine quality. What are the resolution and accuracy specifications? Resolution is 0.001 mm and the stated accuracy is 0.004 mm, which supports fine measurement tasks and consistent quality control. How is the unit mounted in fixtures or machines? Mounting is via a 12 h7 shank for secure machine integration; the design suits insertion into dedicated fixtures or automated inspection stations. Can measurement data be exported to a control system? Yes, the device provides an RB 4 data output for connection to counters, SPC interfaces or other data acquisition systems to enable digital traceability. Are the measuring faces suited to heavy use? The measuring faces are carbide (HM) and plan‑parallel, chosen for wear resistance and long‑term dimensional stability under frequent measuring cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Inset Micrometer, Parallel Measuring Faces, 0.5mm Spindle Pitch, DIN 863 - Metav IndustryLine
Take advantage of a compact 0–25 mm measuring range, plan‑parallel measuring faces and a fine 0.5 mm spindle pitch for reliable inset measurements in tight assemblies; order the M303.131 directly via Metav Werkzeuge or ask our consultants if needed. M303.131 inset micrometer — 0–25 mm range, plan‑parallel faces The M303.131 is an inset micrometer designed for precise small‑range measurements in assembly and inspection tasks, suitable where space is limited and repeatable readings are required Compact 0–25 mm measuring range Plan‑parallel measuring faces for stability 0.01 mm analogue graduation for fine reads Conforms to DIN 863 for traceable practice Precision tailored for miniature workpieces The micrometer is part of the micro measurement class, covering a 0–25 mm range that is ideal for fine mechanical and watchmaking tasks where short, rigid jaws reduce twist and increase repeatability. The combination of plan‑parallel measuring faces and an analogue readout with 0.01 mm divisions provides a straightforward, reliable basis for quality checks. Compliance with DIN 863 ensures that the instrument meets established workshop standards, delivering measurable conformity for routine inspection tasks while keeping the measuring chain simple and verifiable. Stable mechanics for consistent repeatability A matt‑chrome‑plated drum and a substantial spindle diameter contribute to stable handling and reduced operator‑induced error. The matt chrome drum resists glare while offering a tactile surface for controlled adjustments; the spindle dimension and build quality support reproducible contact pressure and consistent readings. At roughly 0.1 kg, the device is light enough for handheld use yet rigid enough to preserve alignment during short measurement cycles, helping to reduce rework and accelerate throughput in small‑part production. Clear integration and how the spindle specification helps The spindle pitch of 0.5 mm means each full revolution advances the spindle by half a millimetre; combined with the 0.01 mm graduation this yields fifty readable increments per turn, enabling fine positioning without the need for electronic aids. As an inset instrument, the micrometer is designed for flush mounting into fixtures or test rigs, simplifying installation into comparative gauges or automated probes. The plain mechanical principle avoids dependence on batteries or interfaces, making the tool low‑maintenance and predictable in long‑term shop use. Practical benefits for the workshop environment Designed for demanding everyday use, the instrument balances compactness and metrological integrity. The short measuring range and robust faces suit repetitive checks on small features, calibration artefacts and precision fittings. For teams seeking an entry to high‑quality hand metrology, this micrometer delivers reproducible results with minimal training required. The analogue format also makes immediate assessment simple during setup or first‑article inspection, speeding decision‑making on the shop floor while maintaining technical rigour. Choose Metav IndustryLine’s M303.131 for dependable inset measurement and contact Metav Werkzeuge in Emmerich for a tailored supply or technical clarification: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M303.131 GTIN: 4054469115719 Weight: 0.1 kg Facts Measuring range: 0–25 mm Reading: 0.01 mm Spindle pitch: 0.5 mm Standard: DIN 863 Special features Mounting type: inset micrometer Measuring faces: plan‑parallel Drum finish: matt chrome plated Analogue (mechanical) readout FAQ What measuring range does this inset micrometer cover? The M303.131 inset micrometer covers a 0–25 mm range, making it suitable for micro‑class measurement tasks and compact assembly checks. Is the M303.131 compliant with recognised standards? Yes, the instrument is manufactured to DIN 863, which governs micrometer design and measurement practice for workshop use. How fine is the resolution and what does it mean in practice? The micrometer has a 0.01 mm analogue graduation; combined with the 0.5 mm spindle pitch, this provides fifty readable increments per spindle revolution for accurate manual setting and inspection. Can the micrometer be mounted into fixtures or gauges? The M303.131 is an inset design intended for flush mounting into fixtures or test rigs, enabling integration into comparative gauges and production test assemblies. What materials and finishes are used on the measuring surfaces and drum? The drum is matt chrome plated and the measuring faces are plan‑parallel, giving a stable contact geometry and a glare‑reducing, durable finish. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Installation Micrometer Planar Measuring Faces Locking Spindle 6.5mm M9 Thread, DIN 863 - Metav IndustryLine
Take advantage of a compact, built‑in design with a 0–25 mm measuring range and 0.01 mm resolution for reproducible results; the matt chrome‑plated drum and DIN 863 conformity support robust workshop use. Order or obtain application advice directly via Metav Werkzeuge for seamless integration. M303.131.S built‑in micrometer — 0–25 mm, 0.01 mm resolution (Metav IndustryLine) The M303.131.S is a compact built‑in micrometer designed for machine and panel integration, offering planparallel measuring faces and a reliable locking function for repeatable small‑range measurements. Built‑in design for machine mounting 0–25 mm measuring range 0.01 mm analogue readout DIN 863 compliance Consistent precision for repeatable measurements Precision is the primary advantage of this compact micrometer. With a 0–25 mm measuring range and a fine 0.01 mm indication, the instrument supports precise sizing and quality checks where small tolerances matter. The spindle advances with a spindle pitch 0.5 mm, which—combined with the vernier‑style analogue scale—ensures predictable linear motion and traceable increments. Compliance with DIN 863 documents the mechanical accuracy and makes the device suitable for standard workshop inspection routines, ensuring that measurements are both reliable and comparable across shifts and machines. Integration and robustness that reduce setup time Engineered for in‑line installation, the built‑in form factor simplifies mounting into fixtures and control panels. The metric M9 thread and compact spindle Ø 6.5 mm make mechanical connection straightforward, while the low mass (approx. 0.1 kg) minimises dynamic load on moving parts. The matt chrome‑plated drum resists glare and surface wear, improving legibility and longevity in production environments. This combination of mechanical detail reduces setup iterations and shortens machine‑integration time, delivering a measurable improvement in process efficiency. Secure handling and straightforward maintenance Planparallel measuring faces provide stable contact geometry for external and step measurements, reducing orientation error during short‑range checks. A dedicated locking device holds the spindle position for transfer measurements or when replicating a setting across multiple parts. The analogue readout avoids electronics in harsh environments and facilitates quick visual checks on the shop floor. Routine care is limited to light cleaning and occasional lubrication of the spindle; the simple construction keeps downtime low and service straightforward, supporting continuous operation in demanding production contexts. For specific mounting instructions, batch requirements or to discuss suitable quantities for production, contact Metav Werkzeuge — consultants at Metav Werkzeuge can advise on integration, delivery and calibration options. Technical Data Article number: M303.131.S GTIN: 4054469115726 Category: Messschrauben (micrometer) Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution/reading: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Thread for mounting: M9 Weight: 0.1 kg Standard: DIN 863 Special features Built‑in micrometer design for panel or fixture integration Planparallel measuring faces Analogue mechanical readout (vernier style) Matt chrome‑plated drum Locking device for stable measurements FAQ Is the M303.131.S suitable for installation in a machine housing? Yes. The M303.131.S is designed as a built‑in micrometer with an M9 mounting thread and compact spindle diameter for straightforward integration into housings and fixtures. What measurement accuracy can be expected from this micrometer? The instrument provides a 0.01 mm reading increment and is manufactured to DIN 863, offering reliable small‑range accuracy for standard workshop control. Can the micrometer be used for repeated stop‑and‑go measurements? The integrated locking device secures the spindle position, enabling stable repeat measurements and easy transfer of settings between parts. What maintenance does the M303.131.S require? Routine maintenance is minimal: keep the measuring faces clean, apply light lubrication to the spindle as needed and protect the device from heavy contamination to maintain measurement quality. Is the finish on the drum purely cosmetic or functional? The matt chrome‑plated drum improves legibility and resists wear, thus contributing to both handling comfort and long‑term durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm In‑Line Digital Micrometer Head Touchscreen, Non‑Rotating Spindle, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of the combination of high repeatability, Industry 4.0 connectivity and a robust IP65 enclosure for reliable in-line measurement. Order the DataMet micrometer head directly via Metav Werkzeuge or ask our consultants if needed. DataMet micrometer head – In-line micrometer head with 2.4″ touchscreen (0–25 mm) — Microtech Metrology The DataMet micrometer head is a compact in-line measuring instrument for precision length control and automated data capture in production and laboratory environments. 0–25 mm measurement range 0.0015 mm high accuracy Non-rotating spindle design 2.4″ touchscreen with Wireless + USB Precision that reduces rework and secures tolerances The instrument delivers 0.0015 mm accuracy with a readability of 0.0001 mm, providing a measurable reduction in process variation for inspection and set‑up tasks. The non-rotating spindle eliminates torsional errors typical of rotating spindles, so repeated contact measurements remain consistent and less sensitive to operator technique. This level of control is particularly valuable where tight tolerances dictate fewer rejects and faster machine set‑ups, for example during tool offsets, fixture checks or dimensional spot checks on assemblies. Fast integration and real-time data for Industry 4.0 workflows Equipped with a 2.4″ touchscreen and multiple transfer modes, the device supports Wireless, USB HID, Wireless HID+MAC and direct link to the MDS app on Windows, Android, iOS and macOS. The built-in memory manager stores 2000 values in a folder structure with statistics, enabling local batch logging and later transfer. For factory automation, optional MODBUS RTU (RS‑485) is available for PLC integration. The result is a seamless data path from measurement to SPC, reducing manual entry and ensuring traceable digital records for production control. Robust construction for shop-floor reliability The sensing head is housed in CNC‑machined aluminium, providing a resilient frame that withstands handling and mounting stresses. With an IP65 rating the unit tolerates coolant splash and dust on the shop floor, making it suitable for machine‑tool integration or test stands. Built‑in functions such as online graphs, Go/NoGo, Max/Min, linear and temperature correction support reliable decision‑making at the point of measurement and help compensate for common environmental effects that otherwise compromise precision. Functions and modes that simplify measurement tasks The instrument supports on‑line graphic display, analog scale, formula evaluation and timer functions for process checks. A dedicated measuring hub enables wireless instrument synchronisation, 2D graphing and probe mode for complex set‑ups. These capabilities turn a single transducer into a multifunction measurement node that can perform comparative checks, record trends and flag out‑of‑tolerance conditions without additional hardware. An ISO 17025 calibration certificate is supplied for immediate traceability and audit readiness. For tailored integration advice or to secure a calibrated DataMet micrometer head from Microtech Metrology, contact Metav Werkzeuge in Emmerich for specification support and reliable European delivery. Technical data Article number: 110181029 GTIN: 4061905456596 Manufacturer: Microtech Metrology Measurement range: 0–25 mm Readability: 0.0001 mm Accuracy: 0.0015 mm Display: Touchscreen 2.4″ Data output: Wireless + USB Protection class: IP 65 Calibration: ISO 17025 certificate included Facts Resolution: 0.0001 mm Accuracy (specified): 0.0015 mm Memory capacity: 2000 values Display size: 2.4″ Protection rating: IP65 Special features Non-rotating spindle for repeatable contact Wireless MDS app compatibility (Windows, Android, iOS, macOS) Wireless HID and USB HID modes Optional MODBUS RTU (RS‑485) for PLCs On-line graphic, Go/NoGo, Max/Min, formula and timer functions Linear and temperature compensation modes CNC‑machined aluminium housing Measuring hub with 2D graph and probe mode ILAC MRA recognised ISO 17025 calibration certificate FAQ Is the instrument delivered calibrated? Yes. The DataMet micrometer head is supplied with an ISO 17025 calibration certificate for immediate traceability. What accuracy and resolution can be expected? The device specifies an accuracy of 0.0015 mm with a readability of 0.0001 mm, suitable for fine inspection and set‑up tasks. Which data interfaces are available for integration? Data transfer is possible via Wireless, USB HID, Wireless HID+MAC and the MDS app; an optional MODBUS RTU output supports industrial PLC connections. Can the device be used on the shop floor? Yes. The IP65 rating and CNC‑machined aluminium housing ensure resistance to dust and splash, making it appropriate for machine‑tool and workshop environments. How much data can be stored locally? The built‑in memory manager holds up to 2000 values, organised in folders with basic statistics for batch checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Mounting Micrometer Flat Measuring Faces 0.01mm Resolution Standing Spindle 8mm, DIN 863 - Metav IndustryLine
Take advantage of compact, workshop-ready precision with long-term repeatability: the combination of a 0–25 mm measuring range, 0.01 mm graduation and a non-rotating, 8 mm spindle ensures consistent results for small components. Order the installation micrometer directly via Metav Werkzeuge or ask our consultants for tailored advice. M303.151 — Installation micrometer, 0–25 mm, 0.01 mm resolution (Metav IndustryLine) The M303.151 installation micrometer is a compact, workshop-grade device for flat-parallel measurements of small parts and mounting faces, designed for precision fitting and quality control in production environments Compact 0–25 mm measuring range 0.01 mm graduation Flat-parallel measuring faces Fixed 8 mm measuring spindle Conforms to DIN 863 Reliable repeatability for fine mechanical work The installation micrometer delivers dependable repeatability thanks to its fine 0.5 mm spindle pitch and analogue drum calibrated to 0.01 mm divisions. In practice, the combination of a short measuring range and a robust spindle geometry reduces operator-induced variation, so each measurement of small components remains consistent across repeated checks. The flat-parallel measuring faces ensure even contact on flanges and precision seats, which helps to avoid misreads on thin-walled parts. This focus on measurable stability supports faster decision-making on the shop floor and reduces rework cycles. Space-saving design that integrates into assembly and test rigs With a deliberately compact footprint, this micrometer suits installation into fixtures and test benches where space is constrained. The non-rotating 8 mm measuring spindle simplifies fixture design and prevents twisting of delicate workpieces during measurement, while the matt chrome-plated drum offers corrosion-resistant handling in everyday workshop conditions. The parallax-free reading scale improves legibility under varied lighting, making the tool practical for both manual inspection stations and semi-automated test processes. The compact form factor contributes to ergonomic handling and straightforward integration into existing production flows. Standards, accuracy and material considerations for trustable results Built to DIN 863, the instrument meets recognised mechanical micrometer standards and is intended for precision installation tasks within the micro measuring class (0–25 mm). The analogue, mechanical reading method provides direct, maintenance-friendly operation with no electronics to fail in harsh environments. The satin chrome-plated drum resists wear while providing a clear scale contrast. Taken together, these features offer an attractive balance of durability and accuracy for maintenance workshops, jigs and dedicated measuring fixtures where repeatable mechanical performance matters. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M303.151 can be integrated into existing fixtures or inspection routines and to arrange personalised technical advice from our team in Emmerich Technical data Article number: M303.151 GTIN: 4054469115740 eClass: 21170330 ETIM: EC003590 Tariff number: 90173000 Standard: DIN 863 Core dimensions and accuracy Measuring range: 0–25 mm Resolution/graduation: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 8 mm Type: Analog (mechanical) Special features Plan-parallel measuring faces Measuring spindle non-rotating (fixed) Parallax-free reading Drum matt chrome-plated Intended for installation / fixture use FAQ What measurement range does this micrometer cover? The M303.151 covers a measuring range of 0–25 mm, classifying it as a compact instrument suitable for fine mechanical and installation tasks. How fine is the reading on the scale? The installation micrometer provides a 0.01 mm graduation on the analogue drum for reliable workshop-level precision. Is the spindle rotating during measurement? No. The measuring spindle on the M303.151 is non-rotating, which aids fixture integration and prevents twisting of the workpiece. Which standard does the instrument conform to? The device is manufactured to DIN 863, ensuring compliance with established mechanical micrometer specifications. What are the measuring faces like? The measuring faces are flat-parallel, designed to provide uniform contact on flanges, seats and similar mounting surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Mounting Micrometer With 49mm Large Drum, 100-division Spindle 8mm, DIN 863 - Metav IndustryLine
Taking advantage of exceptional fine reading and a carbide spindle, this inset micrometer head provides reliably repeatable measurements for precision assembly and quality control. Order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. M303.170 micrometer head — 0–25 mm range, 0.002 mm fine reading (Metav IndustryLine) The M303.170 is a compact inset micrometer head designed for fine mechanical measurement tasks, offering a 0–25 mm measuring range and a high-resolution 0.002 mm reading for repeatable dimensional checks. 0–25 mm measuring range 0.002 mm fine reading Carbide spindle, 8 mm diameter 49 mm large drum for clear reading Precision that reduces rework and inspection time The micrometer head delivers a 0.002 mm reading resolution and a 1 mm spindle pitch, translating measurement movement directly into highly reproducible values; this reduces uncertainty in incoming inspection and shortens rework loops. Conformity with DIN 863 gives a familiar reference for quality systems and simplifies documentation. The combination of a fine graduation (100 divisions on the drum) and a substantial drum diameter supports quick, unambiguous readings during repetitive checks. Robust spindle and clear visual feedback for confident handling A carbide spindle ensures long-term wear resistance where contact accuracy matters most; paired with flat-parallel measuring faces, the head maintains geometric integrity over extended use. The 49 mm large drum improves legibility, which eases operator work and lowers the risk of misreading. The spindle diameter of 8 mm provides a stable bearing surface that contributes to low runout and steady contact force during measurement cycles. Simple integration into fixtures and standardised workflows Designed as an inset measuring unit, the head is ready for mounting into gauges, fixtures or custom assemblies; the compact dimensions correspond to the Mikro class for small-range metrology (0–25 mm). The analog design with 100 drum divisions is ideal where mechanical simplicity and immediate visual verification are preferred over electronic output. For organisations requiring traceable processes, the reference to DIN 863 streamlines compatibility with calibration schedules and inspection plans. Ideal uses and practical advantages in the workshop This micrometer head is suited to fine mechanical workshops, toolrooms and assembly lines that demand repeatable small-range measurements — from small components to fine threads and turned features. The sturdy spindle and clear drum marking deliver both tactile reliability and visual certainty, helping to prevent measurement drift and supporting faster inspection cycles. Its compact inset form factor allows neat integration into bespoke fixtures without occupying excess space. Order the Metav IndustryLine micrometer head M303.170 from Metav Werkzeuge for prompt dispatch from Emmerich, or ask our consultants for technical integration support by email or phone Technical data Article number: M303.170 GTIN: 4054469115771 Manufacturer: Metav IndustryLine Norm: DIN 863 eClass: 21170330 ETIM: EC003590 TARIC: 90173000 Core measurements Measuring range: 0–25 mm Reading resolution: 0.002 mm Spindle diameter: 8 mm Spindle pitch: 1 mm Drum diameter: 49 mm Features / Special characteristics Carbide spindle Flat-parallel measuring faces Analog reading, 100 divisions on drum Inset mounting style Category: Messschrauben FAQ What measuring range does this micrometer head cover? The Metav IndustryLine micrometer head M303.170 covers a measuring range of 0–25 mm, placing it in the micro class for compact, high-precision work. What is the resolution and how does it affect repeatability? Resolution is 0.002 mm; this fine reading improves repeatability for small features and reduces variation between successive measurements. Which standard does the unit comply with? The device is manufactured to DIN 863, a common mechanical micrometer standard that supports integration into documented quality procedures. Is the spindle wear-resistant for long-term use? Yes, the M303.170 uses a carbide spindle, delivering enhanced wear resistance and sustained contact accuracy in production environments. How is the unit intended to be mounted? The design is an inset measuring head, suitable for installation in gauges or fixtures where a compact, flush-mounted measuring element is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Built-In Micrometer With 0.002 mm Vernier, 8 mm Spindle, 100 Division, Flat Measuring Faces, DIN 863 - Metav IndustryLine
Take advantage of the combination of precise inset design, a 49 mm large drum for effortless reading and a carbide measuring spindle for durable contact; order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine M303.171 inset micrometer – 50 mm, large 49 mm drum The Metav IndustryLine M303.171 is an inset micrometer designed for compact installation and fine mechanical measurement tasks, offering a 0–50 mm range and a prominent drum for rapid, reliable readings. Large 49 mm measuring drum for clear reading Carbide measuring spindle for wear resistance Fine reading: 0.002 mm resolution Precise inset measuring where space is limited The inset design places high-accuracy measurement capability into confined or mounted fixtures, making this instrument well suited to precise assembly and inspection jigs. Featuring a 0–50 mm measuring range, the device falls into the micro category for compact micrometers, where stiffness and control over short measuring spans are decisive. The carbide measuring spindle provides a hard-wearing contact face that resists deformation, which maintains measurement integrity over repeated use and reduces recalibration frequency. Compliance with DIN 863 assures that the device meets recognised workshop standards for mechanical micrometers. Large drum and fine graduation for faster, dependable readings A 49 mm drum significantly increases the readable scale area, which reduces eye strain and speeds up routine measurements in production. The instrument features a 100-division drum combined with a fine reading specification of 0.002 mm, enabling precise interpretation of small increments without complex conversion. The 8 mm spindle diameter and a measured spindle pitch of 1 mm contribute to a robust feel and consistent travel per revolution, supporting repeatable results when used in repetitive inspection tasks. This arrangement improves throughput in quality control while keeping operator workload low. Built for workshop durability and straightforward integration Constructed for installation use, the instrument’s flat-parallel measuring faces and solid spindle construction ensure stable contact geometry and long-term repeatability. The analogue, mechanical design eliminates dependency on batteries and electronic interfaces, simplifying integration into fixed gauges or measuring stations. The relatively light mass supports easy handling during assembly and when fitting into panels or fixtures. Where traceable calibrations are required, standard workshop procedures apply; Metav IndustryLine supplies instrument data and specification details to support in-house quality processes. Choose the Metav IndustryLine M303.171 for reliable inset measurement with a large drum and robust carbide spindle — contact Metav Werkzeuge for product matching and installation advice. Technical Data Article number: M303.171 GTIN: 4054469115788 Category: Micrometer screw (inset design) Weight: 0.7 kg Standard: DIN 863 Tariff number: 90173000 Facts Measuring range: 0–50 mm Resolution / fine reading: 0.002 mm Drum diameter: 49 mm Spindle diameter: 8 mm Spindle pitch: 1 mm Special features Carbide measuring spindle Analogue mechanical readout 100-division drum graduation Flat-parallel measuring faces Designed for inset/panel mounting FAQ What measuring range does this instrument cover? The instrument covers a 0–50 mm measuring range and is classified in the micro category for compact, high-precision tasks; the Metav IndustryLine M303.171 is tailored to short-span measurements. Is the reading resolution suitable for fine workshop checks? Yes. The M303.171 provides a fine reading of 0.002 mm, combined with a 100-division drum and a large 49 mm drum face for easier interpretation during inspection routines. What material is used for the measuring spindle? The measuring spindle is made with a carbide contact surface, ensuring wear resistance and prolonged dimensional stability under repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Digital Inset Micrometer 0–50 mm x 0.001 mm, Carbide Faces, Ratchet Stop, DIN 863 - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, carbide wear resistance and digital data output to keep inspection processes fast and reliable. Order the M302.093.C directly via Metav Werkzeuge or ask our consultants if additional integration advice is required. M302.093.C Digital Built-in Micrometre — 0–50 mm, 0.001 mm resolution — Metav IndustryLine The M302.093.C is a compact built-in micrometre designed for precise thickness and diameter checks in production and testing environments, ideal where space and repeatability matter 0.001 mm resolution for fine measurements Carbide measuring faces for wear resistance Integrated ratchet for constant measuring force RB 4.1 data output for process integration High-precision measurement for consistent quality This built-in instrument offers a measuring range of 0–50 mm with a reading step of 0.001 mm, delivering the fine granularity required for modern quality control. The specified measurement accuracy of 0.006 mm provides a verifiable basis for tolerance checks and acceptance decisions, while conformity with DIN 863 ensures the device fits established workshop and inspection workflows. These characteristics translate directly into fewer rejected parts and shorter set-up times when incorporated into standard inspection routines. Durable contact and reliable repeatability Wear-critical surfaces are fitted with carbide (HM) measuring faces, ensuring long service life and steady performance under frequent use. A built-in ratchet guarantees a constant measuring force, reducing variability introduced by manual operation and improving repeatability across operators. The instrument features plan-parallel contact faces and a robust spindle of 6.5 mm, giving a stable contact geometry that helps sustain measurement stability over thousands of cycles. Built-in format and digital integration for modern workflows Designed for panel or fixture mounting, the unit’s built-in design eases integration into test benches and production lines. The digital display provides ON/OFF, ABS/INC, UNIT and SET controls for straightforward operation, while the RB 4.1 data output permits direct transfer of measured values to data loggers, SPC systems or custom interfaces — supporting traceable results and automated documentation. The compact mechanism and an overall weight of 0.5 kg simplify handling and installation within confined assemblies. Practical benefits for workshop and production use The functional combination of a compact form factor and precise electronics makes this instrument suitable for final inspection, in-process checks and embedded measurement tasks where space is limited but accuracy remains essential. The mounting option 12 h7 facilitates secure integration into fixtures. Supplied as a built-in device, it reduces mechanical adaptation time and helps speed up machine acceptance and routine checks on the production floor. Discuss integrating the M302.093.C into existing inspection fixtures with Metav Werkzeuge — contact Metav Werkzeuge for technical consultation and reliable supply from Emmerich. Technical data Article number: M302.093.C GTIN: 4054469114545 Manufacturer: Metav IndustryLine Category: Micrometres Measuring range: 0–50 mm Resolution: 0.001 mm Accuracy: 0.006 mm Measuring faces: Carbide (HM), plan-parallel Spindle diameter: 6.5 mm Mounting: 12 h7 Display: ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Weight: 0.5 kg Standard: DIN 863 Key figures Measuring range min: 0 mm Measuring range max: 50 mm Reading in inches: 0.00005 in Weight: 0.5 kg Spindle: 6.5 mm Accuracy figure: 0.006 mm Special features Built-in design for panel or fixture mounting Carbide measuring faces for extended wear resistance Ratchet stop for consistent measuring force Digital readout with selectable absolute/incremental modes RB 4.1 data interface for digital process integration FAQ Is the M302.093.C suitable for integration into production fixtures? Yes. The M302.093.C built-in micrometre by Metav IndustryLine has a 12 h7 mounting interface and an RB 4.1 data output, which facilitates secure fixture mounting and data transfer to process systems. What level of accuracy can be expected from this instrument? The device is specified with an accuracy of 0.006 mm and a resolution of 0.001 mm, making the M302.093.C suitable for standard workshop inspection and many precision production applications. Are the measuring faces resistant to wear from frequent use? Yes. The micrometre is fitted with carbide (HM) measuring faces, providing increased wear resistance and longer intervals between service or replacement. How is the digital readout operated and what functions are available? The digital display includes ON/OFF, ABS/INC, UNIT and SET functions for routine measurement modes and zeroing, and it supports incremental and absolute measurements for flexible use. Can measurement values be recorded automatically? Measurement values can be exported via the RB 4.1 data output, enabling connection to statistical process control software or data loggers for automated documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Built-In Digital Micrometer Gauge Colour Touchscreen Wireless+USB ISO17025 - Microtech Metrology
Combining high‑precision measurement, extensive digital connectivity and an ISO 17025 calibration certificate, this built‑in micrometer supports reproducible quality control and streamlined data workflows. Benefit from compact bench use, wireless data transfer and a rugged CNC‑machined aluminium housing — order the device directly via Metav Werkzeuge or ask our consultants if needed. Built‑in micrometer by Microtech Metrology — Sub‑micron resolution, 2.4″ colour touchscreen The built‑in micrometer is a bench and laboratory instrument designed for inline diameter, thickness and form checks in production control, inspection benches and laboratory environments. Resolution 0.0001 mm display Accuracy 0.0025 mm specification Colour 2.4" touchscreen interface ISO 17025 calibration certificate included Traceable precision for process control The instrument delivers high‑resolution readouts (0.0001 mm) combined with a verified accuracy of 0.0025 mm, providing the numerical basis for consistent acceptance decisions and SPC routines. The included ISO 17025 calibration certificate confirms traceability to recognised standards, reducing audit effort and eliminating ambiguity during initial inspections. This combination of resolution and certified accuracy is particularly helpful where statistical process control and batch documentation are mandatory. Seamless data flow that fits Industry 4.0 Designed with modern workflows in mind, the unit supports wireless and USB data transfer, including multiple HID modes and a dedicated wireless connection to Microtech’s MDS app. The built‑in memory manager stores up to 2,000 values in foldered structures and offers statistical summaries, while MODBUS RTU (RS‑485) provides a path for PLC and networked measurement integration. These capabilities reduce manual transcription, accelerate reporting and enable near‑real‑time feedback from the measuring point to production IT. Practical bench design for routine inspection The device’s CNC‑machined aluminium housing combines rigidity with a compact footprint for bench or laboratory mounting. A 2.4″ colour touchscreen presents graphical modes — analog scale, max/min, go/no‑go and 2D graphs — making interpretation rapid for operators with varied experience. The instrument also offers linear and temperature correction functions to compensate environmental influences, so a stable measuring chain can be maintained without continual manual adjustment. Integration advantages and user ergonomics Beyond raw performance, the micrometer delivers workflow advantages: wireless probe modes, a 2D graphing function for profile checks and a timer/ formula feature for repeatable testing sequences. Memory export options (Windows, Android, iOS, macOS) simplify reporting and back‑office consolidation. For laboratories seeking to rationalise suppliers, the unit’s bench configuration, flexible data outputs and documented calibration support efficient on‑boarding into existing quality systems. For integration advice or to discuss a tailored configuration for production or laboratory use, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to plan the deployment of the Microtech built‑in micrometer (SKU 110180578) and related accessories Technical Data Article number: 110180578 GTIN: 4061905040740 Manufacturer: Microtech Metrology Facts Measuring range: 0–50 mm Resolution (display): 0.0001 mm Accuracy: 0.0025 mm Digital display: Colour 2.4" touchscreen Data output: Wireless, USB, MODBUS RTU (RS‑485) Calibration: ISO 17025 certificate included Special features CNC‑machined solid aluminium housing Memory manager: 2,000 values, folder system, statistics Modes: Analog scale, Go/No‑Go, Max/Min, 2D graph, Probe mode Connectivity: Wireless MDS app (Windows, Android, iOS, macOS), HID modes Bench configuration for laboratory use FAQ What measurement range does this device cover? The built‑in micrometer from Microtech Metrology covers a measuring range of 0–50 mm and is delivered as a bench‑mount instrument (SKU 110180578). Is a calibration certificate included with the instrument? Yes—the instrument is supplied with an ISO 17025 calibration certificate, confirming traceability and suitability for accredited quality processes. Which data transfer options are available? Data can be transferred wirelessly to the Microtech MDS app, via wireless HID, USB HID and MODBUS RTU (RS‑485), enabling direct integration into laboratory and production IT systems. How does the touchscreen support everyday use? The 2.4″ colour touchscreen provides intuitive access to analog scale, Max/Min, Go/No‑Go and 2D graph modes, which speeds up inspections and reduces interpretation errors for operators. Is the instrument suitable for Industry 4.0 integration? Yes—the Microtech built‑in micrometer (SKU 110180578) includes wireless synchronisation, MODBUS RTU output and extensive memory functions that support automated data capture and downstream analysis. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Built-In Digital Micrometer Head Rotating Spindle, Touchscreen 2.4" , IP65 - Microtech Metrology
The supplied product data contains a contradiction that prevents a reliable product description being produced: one entry describes the measuring spindle as rotating while another entry indicates the spindle does not rotate. This inconsistency directly affects the functional characterisation and the proper English technical term for the device, since whether the spindle rotates or remains fixed alters measurement technique, mounting details and intended applications. Please confirm the correct spindle behaviour (rotating or non‑rotating) and resubmit the clarified specification. Once the spindle function is verified, a complete, accurate and standards‑compliant product text — including calibrated status, IP rating, digital display details and data‑output options — can be produced for publication.
50mm Mounting Dial Indicator Large 29mm Drum, 8mm Spindle, 1mm Pitch, Ratchet, DIN 863 - Metav IndustryLine
Take advantage of the combination of precise mechanical measurement, wear‑resistant spindle technology and a large, easy‑to‑read thimble for reliable inset measurement tasks; order the M303.162 via Metav Werkzeuge or consult our specialists for integration advice. M303.162 inset micrometer head — 50 mm range, large 29 mm thimble, carbide spindle The M303.162 is an inset micrometer head designed for integration into jigs, fixtures and measuring stations where compact, repeatable linear measurement is required. 50 mm measuring range 29 mm large thimble Carbide spindle, 8 mm diameter Ratchet stop for constant force Precision and readable performance for production use This inset micrometer head delivers a 50 mm measuring range with a mechanical reading of 0.01 mm, offering a balance between reach and fine resolution that suits both workshop and bench‑level quality control. The carbide spindle provides superior wear resistance, so the measuring face retains form under frequent contact; combined with the plane‑parallel measuring faces, this reduces tilting and improves repeatability. Compliance with DIN 863 signals industry‑standard tolerances and makes the unit straightforward to specify in drawings and inspection plans. Designed for integration and reliable handling The unit’s large thimble (29 mm) improves legibility and handling when mounted in confined stations, while the 1 mm spindle pitch gives a predictable linear advance per revolution, helpful when setting stops or calibrating travel. A built‑in ratchet stop ensures consistent measuring force, limiting operator‑induced variation during contact. The compact inset layout simplifies installation into retaining frames or adaptor blocks and helps maintain alignment in repetitive measurement cycles. Durable components and application suitability Manufactured with an 8 mm spindle and a focus on robust contact geometry, this measuring head is suited to fixtures used in small‑batch production, gauge assemblies and toolroom jigs. The combination of a hard wearing spindle surface and analog reading makes the unit serviceable in environments where electronic outputs are unnecessary or where a classic mechanical indicator is preferred. Its features support repetitive inspection tasks and prolong service life under regular use. For machine‑side measurement tasks that demand longevity and clear mechanical readings, choose the Metav IndustryLine M303.162 inset micrometer head — contact Metav Werkzeuge for specification checks or to arrange supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M303.162 GTIN: 4054469115764 ECLASS: 21170330 ETIM: EC003590 Norm: DIN 863 Facts Measuring range: 0–50 mm Reading / resolution: 0.01 mm Spindle pitch: 1 mm Spindle diameter: 8 mm Thimble diameter: 29 mm Special features Carbide spindle Plane‑parallel measuring faces Ratchet stop Analog operation Built‑in/inset design FAQ What measuring range does this unit cover? The M303.162 inset micrometer head covers a measuring range of 0–50 mm, suitable for compact fixture applications. What resolution and standard does the micrometer use? This model offers a mechanical reading of 0.01 mm and is specified in accordance with DIN 863 for traceable mechanical performance. Is the spindle material corrosion‑resistant and wear‑proof? The spindle of the M303.162 is made with a carbide contact surface to provide enhanced wear resistance for extended service life. How does the ratchet stop help in daily use? The integrated ratchet stop ensures a consistent measuring force on each contact, reducing variation caused by different operator pressure. Can this head be integrated into a jig or fixture? Yes, the inset design of the M303.162 is intended for installation in jigs, gauges and dedicated measuring fixtures where compact, repeatable measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.5mm Built-In Indicator Gauge Ball-Tip Spindle 3.5mm, 0.01mm Resolution - Metav IndustryLine
Take advantage of the compact 0–6.5 mm measuring range, 0.01 mm resolution and a fully hardened spindle to secure reproducible micro‑measurements in confined assemblies; order directly via Metav Werkzeuge or consult our specialists for application advice. M303.111 Embedded Micrometer — 0–6.5 mm, Ball-faced, 0.01 mm (Metav IndustryLine) The M303.111 is an embedded‑mount micrometer designed for precise small‑range measurement tasks in fine mechanical and instrument applications. Compact 0–6.5 mm measuring range Resolution 0.01 mm for fine control Fully hardened spindle for longevity Ball-shaped measuring faces reduce risk of marking Precision that fits tight spaces The embedded micrometer delivers substantial measuring precision within a very small envelope. With a measurement range of 0–6.5 mm and an analog resolution of 0.01 mm, the instrument is tailored for fine adjustment and inspection work where space is limited. The short overall length and reduced mass make it particularly suitable for installation into fixtures, jigs or small housings, while maintaining the repeatability required in delicate assembly and watch‑making type tasks. Durable mechanics for repeatable results A hardened spindle and a matt‑chrome sleeve ensure that the mechanical components retain their geometry under frequent use. The fully hardened spindle reduces wear and the matt chrome‑plated drum resists corrosion and glare, improving legibility under workshop lighting. The spindle pitch of 0.5 mm provides a tactile, predictable feed so that incremental adjustment is intuitive and stable, delivering consistent pass/fail outcomes in production checks. Safe contact and surface care The device features ball‑shaped measuring faces, an option that lowers the contact pressure on delicate surfaces and reduces the likelihood of marking soft workpieces. As an analog measuring head, it trades electronic complexity for a straightforward, robust measurement principle that is easy to read and simple to integrate into existing inspection rigs. The compact construction supports quick handling and reduces operator fatigue during repetitive measurement tasks. For reliable micro‑measurement in confined applications, choose the Metav IndustryLine M303.111 and contact Metav Werkzeuge for tailored procurement and technical guidance. Technical data Article number: M303.111 GTIN: 4054469115672 ETIM: EC003590 ECLASS: 21170330 Facts Measurement range: 0–6.5 mm Resolution / graduation: 0.01 mm Spindle pitch: 0.5 mm Length: 37 mm Weight: 0.01 kg Customs tariff number: 90173000 Special features Analog display Ball-shaped measuring faces Spindle fully hardened Drum matt chrome‑plated Embedded mounting version Category: Micrometer (embedded measuring head) FAQ What is the smallest increment visible on this measuring head? The M303.111 provides an analog graduation with a readout of 0.01 mm, suitable for fine workshop controls and routine quality checks. Can the device be integrated into a measuring fixture? Yes, the embedded design of the M303.111 is intended for installation in fixtures, jigs or small housings where compactness and repeatability are required. How does the ball-shaped measuring face help in daily use? Ball-shaped faces on the M303.111 reduce contact stress on sensitive surfaces and lower the risk of marking, which is beneficial when measuring soft or finished components. Is the spindle wear‑resistant for high cycle counts? The spindle of the M303.111 is fully hardened, providing increased wear resistance and preserving measurement accuracy over prolonged repetitive use. What kind of applications suit this micrometer best? Typical uses include fine mechanical assembly, instrument manufacturing and precision inspection tasks where a 0–6.5 mm range and compact embedding are decisive. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.5mm Inset Gauge Reverse Scale Spindle 3.5mm, Hardened Spindle Chrome Drum - Metav IndustryLine
Take advantage of compact installation performance and reliable analogue reading: the combination of a 0–6.5 mm measurement range, reversed scale and a fully hardened spindle ensures precise small‑range control with long service life. Order the micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. M303.110.U Inset Micrometer – 0–6.5 mm range, reversed scale (Metav IndustryLine) The M303.110.U is an inset micrometer designed for confined installation spaces, offering a reversed scale for inverted or reversed‑direction readings and precision measuring in fine‑mechanical assemblies. Reversed scale for inverted readings Hardened spindle, matt‑chrome barrel Compact inset design, 37 mm length Precise 0–6.5 mm measurement range Compact precision for confined installations The M303.110.U delivers focused measuring capability where space is limited. Its 0–6.5 mm range concentrates accuracy on small features and short travel applications, reducing handling time and set‑up complexity compared with larger gauges. The reversed scale facilitates measurements from the rear or when the instrument is mounted upside down, streamlining workflows in fixtures and panel installations. An analogue reading format with a fine graduation supports rapid visual checks while maintaining traceable reproducibility. Durable mechanical construction for repeatable results Built for workshop and production environments, this inset instrument uses a hardened spindle and a matt‑chrome barrel to resist wear and maintain surface integrity under frequent contact. The spindle advance of 0.5 mm per turn yields predictable tactile feedback for repeatable positioning, while the analogue graduation provides a clear 0.01 mm reading step for conventional quality control tasks. These mechanical choices reduce maintenance intervals and preserve measurement certainty over many cycles, making the device a dependable element in inspection routines. Easy installation and practical handling benefits With a compact form and 37 mm length, the instrument integrates neatly into assemblies and test fixtures where larger tools would obstruct access. Plan‑parallel measuring faces ensure consistent contact geometry, avoiding skewed readings on small workpieces. The extremely low mass (approx. 0.01 kg) minimises added load on delicate mounts and simplifies one‑person handling during fitting. For panel or inset use the combination of compact dimensions and hardened contact surfaces reduces the need for frequent recalibration and supports uninterrupted production. Supply and service backed by a European quality filter Sourcing through Metav IndustryLine brings workshop compatibility and supply reliability to the fore: stock and logistics are managed from Emmerich with a focus on steady availability for industry and trade. The product benefits from Metav’s positioning as a precision partner, offering a broad range of measuring tools that reduce supplier complexity and support efficient production planning. Proven workshop relevance and a grounded supply chain add pragmatic reassurance to the micrometer’s technical strengths. For compact inset measurement tasks, contact Metav Werkzeuge for technical advice and secure direct supply of the M303.110.U from Emmerich for reliable workshop integration. Technical data Article number: M303.110.U GTIN: 4054469115665 Category: Micrometers Label: Einbau‑Mess, 6,5 mm, umgekehrt MB 0 - 6,5 mm, Spindel 3,5 mm Facts Measurement range: 0–6.5 mm Resolution / reading step: 0.01 mm Spindle pitch: 0.5 mm Length: 37 mm Weight: 0.01 kg Tariff number: 90173000 Special features Analog instrument Reversed scale (Umkehrskalierung) Fully hardened spindle Matt‑chrome barrel Plan‑parallel measuring faces Inset / installation design FAQ What is the measuring range and resolution of this inset micrometer? The micrometer offers a measuring range of 0–6.5 mm with an analogue reading resolution of 0.01 mm, suitable for fine mechanical checks. Can the instrument be mounted inverted for panel applications? Yes. The device features a reversed scale, enabling reliable inverted or rear‑facing readings when mounted in fixtures. What materials are used for the spindle and barrel? The spindle is fully hardened for wear resistance and the barrel is matt‑chrome plated to reduce glare and surface wear in daily use. Is the micrometer suitable for repeated production inspection? The combination of a hardened spindle, plan‑parallel faces and compact installation form makes this micrometer ideal for routine inspection and fixture integration. Which brand supplies the product and where is it distributed from? The M303.110.U is supplied under Metav IndustryLine and distributed from Metav Werkzeuge’s logistics in Emmerich for European workshop supply. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Achieve micrometre positioning with built-in micrometer heads
Built-in micrometer heads, also referred to as micrometer heads or integrated micrometer heads, are compact, high-precision actuators designed for direct integration into fixtures, special machines, optical tables and measurement systems. Unlike conventional micrometers with a frame, these units consist solely of the measurement spindle and drive mechanism, providing a space-saving solution for precise adjustment tasks.
How they work and where they excel
These devices serve as micrometre-accurate adjustment and positioning units that move components such as parts, laser elements, test probes or mechanical axes with extremely fine increments. The spindle-driven design, combined with a backlash-free mechanism and finely ground thread, allows repeatable mechanical travel down to 0.001 mm. Mounting is achieved via standardised shanks, and measuring faces are available in flat, spherical or carbide-tipped variants. Options range from analogue versions with anti-glare scales to digital with data output for automated monitoring of travel in quality-control processes.
Tangible production benefits
- Shorter setup and adjustment times through precise, repeatable positioning.
- Reduced scrap and rework thanks to 0.001 mm resolution and backlash-free operation.
- Simple integration into existing machines via standardised shanks, lowering engineering effort.
- Enhanced automation capability with digital output for inline process control.
- Flexible contact geometry with flat, spherical or carbide-tipped measuring faces to suit varied applications.
Why Metav is the practical choice for workshop sourcing
Metav stands for democratisation of precision: decades of expertise, a quality filter in Emmerich and a consolidated offering that serves industry, trade and specialist dealers. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav supplies reliable, ready-to-integrate built-in micrometer heads and associated components for dependable production workflows.
Core takeaway
For micrometre-accurate positioning in confined assemblies or automated inspection rigs, built-in micrometer heads deliver repeatable, space-saving adjustment with options for analogue or digital integration.
FAQ
What accuracy can I expect from built-in micrometer heads?
Built-in micrometer heads in this range provide repeatable positioning down to 0.001 mm, achieved through a finely ground spindle and backlash-free construction.
Can these micrometer heads be mounted directly into custom fixtures?
Yes. The micrometer heads are designed for installation via standardised shanks, allowing direct mounting in fixtures, special machines and optical tables.
Are digital outputs available for process control?
Digital versions with data output are available, enabling automated monitoring of travel and integration into quality-control systems.
Which measuring face should I choose for delicate parts?
For delicate surfaces, choose a spherical or carbide-tipped measuring face depending on contact pressure and wear resistance; these options are offered alongside flat faces for general use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com