Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25-50mm Digital Micrometer 0.001mm Resolution IP65, 2mm Spindle Pitch, With Friction Ratchet, In Case - Metav IndustryLine
Benefit from the combination of IP65 protection, a 0.001 mm reading step and a friction ratchet that delivers consistent measuring force for reliable, repeatable inspection in the 25–50 mm range. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Digital Micrometer M302.285 — 25–50 mm, IP65, 0.001 mm (Metav IndustryLine) The Digital Micrometer M302.285 is a workshop-grade micrometer designed for high-precision external measurements in the 25–50 mm range, combining a sealed indicator, fine spindle control and a clear digital readout for quality control and production inspection. IP65 protection for dust and splash resistance 0.001 mm resolution for 1 µm readings Friction ratchet ensures consistent measuring force ON/OFF, ABS/INC, SET and UNIT display functions Built for repeatable precision on the shop floor The Digital Micrometer M302.285 brings workshop robustness to routine dimensional checks. With a measuring range of 25–50 mm, a 0.001 mm display step and hardened measuring faces, the instrument is aimed at inspection stations and assembly benches where repeatability matters. The friction ratchet helps to guarantee a consistent closing force, which reduces operator-induced variation and improves the comparability of successive readings. Compliance with DIN 863 positions the device within recognised mechanical metrology practice, making it suitable for incoming inspection and production control. Faster readings, fewer handling errors The sealed digital display supports ON/OFF, ABS/INC, SET and UNIT functions, enabling quick toggling between absolute and incremental modes and simple zeroing for batch inspection. The spindle pitch 2 mm gives fine thread movement for precise approach, while the matt‑chrome measuring drum and tactile ratchet aid controlled handling. Together these features increase throughput: measurements are taken more quickly and with reduced rework, supporting efficient quality workflows without sacrificing measurement integrity. Robust construction for everyday use Designed for the realities of the production environment, the micrometer’s frame is painted and the measuring drum is matt chrome finished to resist wear and maintain legibility. The instrument is rated IP65, so it tolerates dust ingress and wash-downs typical in busy shops. The presence of hardened measuring faces protects contact surfaces and extends service life under frequent use. These construction choices, combined with a compact 25–50 mm span, deliver a balance of stiffness, manoeuvrability and durability that suits metrology benches and machine-side inspection alike. For tailored technical advice or to request a quotation for this Metav IndustryLine digital micrometer, contact Metav Werkzeuge GmbH in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — our specialists will advise on the best inspection setup for the application Technical Data Article number: M302.285 GTIN: 4054469115580 Brand: Metav IndustryLine Norm: DIN 863 Facts Measuring range: 25–50 mm Resolution: 0.001 mm (1 µm) Spindle pitch: 2 mm Measuring faces diameter: 6.5 mm Protection class: IP65 Special features Digital display with ON/OFF, ABS/INC, SET and UNIT Friction ratchet Hardened measuring faces Frame painted and measuring drum matt chrome Product category: micrometers (Messschrauben) Tariff number: 90173000 FAQ Is the micrometer suitable for routine shop-floor use? Yes. The Metav IndustryLine digital micrometer M302.285 is designed with IP65 protection and durable finishes to withstand dust and splash exposure typical in production environments. What level of resolution and repeatability does it offer? The instrument provides a display resolution of 0.001 mm (1 µm), giving fine graduated readings that are valuable for precise dimensional control with consistent repeatability when used with the friction ratchet. Does the device comply with recognised metrology standards? The product is specified to meet DIN 863, which aligns it with established mechanical metrology practices for external micrometers. Why is the 2 mm spindle pitch important? A spindle pitch of 2 mm offers controlled spindle advance and tactile feedback on each rotation, improving the operator’s ability to close the anvils precisely and reducing the risk of over‑travel during measurement. Are the measuring faces protected against wear? Yes, the micrometer features hardened measuring faces, which increase resistance to wear under frequent contact and contribute to longer service life for the instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Micrometer 0.001mm Resolution, Ratchet, Carbide Faces, DIN 863, Supplied in Case - Metav IndustryLine
Take advantage of 0.001 mm resolution and a ratchet thimble for reproducible measurements across the 25–50 mm range; the compact instrument combines precise readout and dependable handling for routine inspection tasks. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital micrometer M302.291 — Metav IndustryLine, 25–50 mm, 0.001 mm resolution The Digital micrometer M302.291 is a compact precision measuring instrument for workshop and production measurement tasks in the 25–50 mm range, designed for repeatable thickness and outside-diameter checks. 0.001 mm resolution for submicron checks Ratchet thimble for reproducible measuring force Digital display with ON/0, mm/inch, ABS, HOLD Consistent high-resolution measurement for everyday inspection The micrometer delivers 0.001 mm resolution, making it suitable where fine increments matter during pass/fail checks or component verification. The clear digital display with four-button control (ON/0, mm/inch, ABS, HOLD) simplifies unit switching and zeroing; the absolute (ABS) mode preserves the zero reference even after power cycles, which reduces the risk of cumulative setup errors. This combination of fine resolution and straightforward controls increases throughput during repetitive tasks while keeping measurement uncertainty low. Reproducible contact and handling to reduce operator variation A built-in ratchet thimble ensures a uniform measuring force for each contact, preventing variation from over-tightening and improving repeatability between operators. The instrument’s hardened measuring faces, Ø 6.5 mm, provide a robust contact surface that resists wear and keeps the contact geometry stable over time. For routine quality control in production or the workshop bench, these design choices translate into fewer out-of-tolerance alarms caused by handling differences rather than part defects. Compact format and range tuned for fine-mechanical work Classified in the Micro range (25–50 mm), this micrometer is tailored to fine-mechanical and general workshop tasks where short anvils and high stiffness are advantageous. The 25–50 mm span delivers a good balance between reach and rigidity, making the instrument easy to manoeuvre in tight assemblies while remaining firm enough for reliable outside-diameter and thickness measurements. The compact form factor supports single-hand operation and fast, frequent measurement cycles. Practical features that increase efficiency on the shop floor The four-button interface and the HOLD function allow quick capture of readings for transfer or documentation, while the mm/inch toggle supports mixed-unit workflows without manual conversion. A dedicated data output (RB 4) is available for digitising results or connecting to logging systems where process traceability is required. Conforming to DIN 863, the device adheres to established workshop standards for micrometres, providing a familiar frame of reference for inspection routines. For precise, repeatable small-range measurements, contact Metav Werkzeuge to discuss the Metav IndustryLine digital micrometer M302.291 and find the optimal delivery and documentation for your application Technical data SKU: M302.291 GTIN: 4054469146430 Category: Messschrauben Facts Measuring range: 25–50 mm Resolution: 0.001 mm Measuring faces diameter: 6.5 mm Standard: DIN 863 Data output: RB 4 Special features Digital display with ON/0, mm/inch, ABS and HOLD Ratchet thimble for consistent measuring force Hardened measuring faces, Ø 6.5 mm Delivered in transport case FAQ What measuring range does this micrometer cover? The Metav IndustryLine digital micrometer M302.291 covers a measuring span of 25–50 mm, suitable for fine outside-diameter and thickness inspections. What resolution and accuracy can be expected? The instrument provides a 0.001 mm resolution; this high resolution supports detailed dimensional checks and rapid detection of small deviations. Is the measuring contact robust for workshop use? Yes, the micrometer has hardened measuring faces with a 6.5 mm contact diameter, designed for durability and stable contact geometry during repeated use. Does the micrometer support data output for documentation? The device includes an RB 4 data output option for capturing measurements electronically and integrating readings into inspection workflows. How does the ratchet thimble improve results? The ratchet thimble on the Metav IndustryLine digital micrometer M302.291 enforces a reproducible contact force, reducing operator-induced variation and improving repeatability across multiple measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Micrometer Friction Ratchet 0.001mm Resolution, With Data Output RB6 - Metav IndustryLine
Take advantage of the combination of 0.001 mm resolution, a friction ratchet for repeatable measuring force and a digital RB 6 data output for efficient quality documentation; order or request technical advice from Metav Werkzeuge for streamlined integration into inspection and production processes. Digital micrometer M302.075 (Metav IndustryLine) – 25–50 mm, 0.001 mm resolution The Digital micrometer M302.075 is a workshop-grade external measuring instrument designed for precise dimensional control in machining and inspection tasks, covering a practical measurement range for components and toolmaking. High resolution 0.001 mm display Friction ratchet for consistent measuring force RB 6 data output for traceable logging Conforms to DIN 863 Precision where consistent readings matter The micrometer is built around a high-resolution measurement system with 0.001 mm graduation, delivering fine incremental readings that support tight tolerance control. With a measurement range 25–50 mm, the instrument targets the common span used in component manufacturing and toolmaking, offering an optimum balance between reach and stiffness. The inclusion of a friction ratchet ensures a reproducible contact force, reducing operator-induced variance and improving repeatability for serial measurements. Conformity with DIN 863 underlines its suitability for workshop and inspection use where recognised standards are required. Efficient data handling for quality workflows Equipped with data output RB 6, the micrometer facilitates direct transfer of measured values into inspection software or SPC systems, speeding up documentation and reducing transcription errors. The digital display provides clear numeric feedback and includes ON/OFF, SET, DATA and mm/inch/0 functions for straightforward operation and unit switching. These features support rational quality processes by shortening the time from measurement to analysis and enabling consistent record keeping for audit and traceability. Designed for practical workshop use Engineered for everyday handling, the measuring faces of 6.5 mm diameter give a compact contact area that suits small and medium-sized parts while offering robust surface contact. The instrument's overall construction yields a manageable mass of 0.7 kg, helping stable placement during measurement without unnecessary bulk. The friction ratchet also contributes to ergonomic handling by preventing over-tightening and ensuring a steady feel during repeated checks—benefits that keep inspection routines efficient and reduce operator fatigue. Where this instrument adds value Well matched to precision workshops, toolrooms and small-series production, the micrometer is appropriate for dimensional checks on turned parts, gauges and fittings as well as incoming goods inspection. Its combination of fine resolution, consistent measuring force and digital data export supports lean inspection practices and strengthens process control. For organisations aiming to tighten tolerances and improve measurement documentation, this solution supplies the essential metrological functions in a compact format. For secure procurement and advice on integration into existing inspection routines, contact Metav Werkzeuge — Metav IndustryLine instruments are supported directly from Emmerich for reliable delivery and technical guidance. Technical data Article number: M302.075 GTIN: 4054469168807 Category: Micrometers Measurement range: 25–50 mm Resolution: 0.001 mm Weight: 0.7 kg Norm: DIN 863 Facts Data output: RB 6 Display functions: ON/OFF, SET, DATA, mm/inch/0 Measuring faces diameter: 6.5 mm Special features Friction ratchet Digital readout Suitable for workshop inspection and toolmaking FAQ What measurement range does the micrometer cover? The Digital micrometer M302.075 covers a measurement range of 25–50 mm suitable for typical toolroom and component inspections. What resolution and standards does the instrument meet? The device offers a resolution of 0.001 mm and is produced in accordance with DIN 863 to meet recognised workshop metrology standards. How does the friction ratchet improve measurements? The friction ratchet ensures a consistent contact force, reducing variations from manual tightening and improving the repeatability of successive readings with the micrometer. Can measured values be exported to inspection software? Yes — the micrometer features an RB 6 data output for direct transfer of readings to data loggers or SPC systems, supporting traceable and efficient documentation. Which applications suit this micrometer best? The instrument is ideal for machining inspection, toolmaking, incoming goods control and bench inspection where fine resolution and reliable data capture are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Micrometer With 0.001mm Resolution, Replaceable Anvil And Seven Insert Sets, Plastic Case - Metav IndustryLine
Combining 0.001 mm resolution, a movable anvil and RB 4.1 data output, this instrument delivers reliable, traceable readings for production and inspection tasks; order directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Universal Micrometer M302.141.D (25–50 mm) — 0.001 mm resolution, movable anvil Digital Universal Micrometer M302.141.D is a precision measurement instrument for fine mechanical and workshop use, designed for fast, repeatable external and special-form measurements in the micro range. 0.001 mm resolution for fine measurement Movable anvil for flexible reach RB 4.1 data output for process logging Ratchet spindle for consistent force Delivered in protective case, 7 insert pairs Precision and repeatability for production control The micrometer is built for consistent, repeatable results: a 0.001 mm display resolution combined with a ratchet spindle and a measuring spindle 6.5 mm ensures stable contact force and minimal operator variation. The rotating spindle and ratchet mechanism make tactile control straightforward, reducing measurement scatter during serial checks. As a result, quality assurance cycles become faster and less dependent on operator judgement, supporting lean inspection routines and improving throughput. Integration and data capture to streamline workflows Equipped with a digital readout and RB 4.1 data interface, the device supports direct data collection for statistical process control and digital logging. The display offers ON/OFF, ABS/INC, UNIT and SET functions for quick unit changes and zeroing, while the data output enables automated transfer of readings to inspection software or SPC systems. This connectivity reduces transcription errors and saves time during batch inspections, making the tool suitable for both standalone checks and connected quality environments. Design, handling and application scope Classified in the micro range (25–50 mm), the instrument is ideal for fine mechanical tasks where compact size and high accuracy are required, such as watchmaking, small components and precision assemblies. The movable anvil increases adaptability for unusual part geometries, and the set includes 7 pairs of inserts to match varied contact profiles. A matt chrome-plated measuring drum improves legibility and corrosion resistance, and the item is supplied in a protective case for secure transport and storage. The micrometer is produced to factory standard calibration (Werksnorm) and is suitable for routine workshop and inspection use. Choose the Metav IndustryLine digital micrometer for precise, data-ready measurements and contact Metav Werkzeuge in Emmerich for application guidance and reliable supply Technical data Article number: M302.141.D GTIN: 4054469114828 Category: Micrometers / Measuring instruments Key figures Measuring range: 25–50 mm Resolution: 0.001 mm (0.00005 in) Weight: 0.9 kg Measuring spindle: Ø 6.5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT, SET Data interface: RB 4.1 Ratchet spindle for consistent measuring force Movable anvil for adaptable contact geometry Supplied with 7 pairs of measuring inserts Matt chrome-plated measuring drum Delivered in a protective case Standard: factory calibration (Werksnorm) FAQ What is the reading resolution and how precise are the measurements? The instrument provides a reading resolution of 0.001 mm; combined with the ratchet spindle and stable spindle design this yields repeatable measurements suitable for workshop and production control. Can measurement data be exported for documentation? Yes, the micrometer supports RB 4.1 data output so readings can be transferred directly to inspection software or data loggers for SPC and traceable documentation. Are specialised contact points included for different part shapes? The delivery includes 7 pairs of measuring inserts, enabling adaptation to various diameters and profiles without compromising accuracy. Is the device ready for use on delivery and how is it packaged? The micrometer is supplied according to the manufacturer's factory standard and comes in a protective case for secure transport and storage. Which applications are best suited to this micrometer? Designed for the micro measuring range, the instrument is ideal for fine mechanical work, small components and production spot checks where compact size and high resolution are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Micrometer With Ball Anvils, Colour Touchscreen, Wireless/USB, IP65, ISO 17025 Cal Cert - Microtech Metrology
Benefit from high metrology standards combined with flexible industry connectivity: the micrometer delivers 0.002 mm measurement accuracy, wireless and USB data transfer, and an ISO 17025 calibration certificate for immediate, traceable use. Order supply directly via Metav Werkzeuge or contact our consultants for tailored integration advice. Microtech Metrology Digital Micrometer (25–50 mm) with 2.4" Colour Touchscreen The Microtech Metrology Digital Micrometer is a high-precision external measuring instrument designed for workshop and laboratory quality control, offering robust data management and Industry 4.0 connectivity. 0.002 mm accuracy for precision measurements ISO 17025 calibration certificate included Wireless and USB data interfaces for Industry 4.0 IP65 protection and 2.4" colour touchscreen Precision measurement with traceable results The micrometer combines a finely tuned spindle mechanism with a 0.002 mm stated accuracy to deliver consistently reproducible external measurements over the 25–50 mm range. The instrument uses spherical anvils (R 5 mm) to reduce edge contact errors when measuring small radii or turned parts, which improves repeatability on curved surfaces. Supplied with an ISO 17025 calibration certificate, the tool arrives ready for use in accredited quality systems and provides documented traceability for audit trails and process validation. Seamless data flow for quality workflows Equipped with multiple data-output modes, the device supports Wireless, USB HID and wireless HID+MAC connectivity as well as optional MODBUS RTU (RS‑485) for integration into production networks. Onboard memory stores up to 2000 values, organised in folders with basic statistics, enabling batch logging before data transfer. The combination of local data logging and diverse transfer protocols reduces manual transcription, accelerates reporting and lowers the risk of human error in quality documentation. Robust design for workshop and shopfloor environments A solid CNC‑machined aluminium housing provides mechanical stability and long-term resistance to everyday shop conditions; the micrometer carries an IP65 rating for protection against dust and low‑pressure water jets. The 2.4" colour touchscreen presents measurements clearly and supports graphical modes such as on‑line charts, min/max indicators and Go/NoGo visualisation. The durable construction and clear user interface together shorten inspection time and increase uptime in busy production environments. Industry 4.0 features that simplify measurement tasks The instrument implements the DataMet DOUBLE SPHERICAL architecture with a computerized MICS system to offer functions like linear and temperature compensation, probe mode, 2D graphing and synchronization with wireless micro‑instruments. These features enable advanced measurement strategies—such as graphical trend analysis and automated corrections—so teams can spot process drift early and make informed adjustments, improving first‑pass yield without adding complexity. For supply, integration advice or a technical quotation, contact Metav Werkzeuge: phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — Metav’s consultants will support specification checks and ordering under the Emmerich quality filter Technical Data Article number: 110360508 GTIN: 4061905457142 Manufacturer: Microtech Metrology eClass: 21170328 Facts Measuring range: 25–50 mm Accuracy: 0.002 mm Reading resolution: 0.0001 mm Memory: 2000 values Display: Colour 2.4" touchscreen Protection rating: IP65 Special features Data output: Wireless + USB HID Optional MODBUS RTU (RS-485) for industrial networks DataMet DOUBLE SPHERICAL micrometer with MICS system Functions: On‑line graphic, Go/NoGo, Max/Min, formula, timer Measurement hub: wireless instrument sync, 2D mode, probe mode Compensation: linear and temperature correction Housing: CNC‑machined solid aluminium block Anvil type: sphere R 5 mm Calibration: ISO 17025 certificate included (Ilac MRA) FAQ What measurement range does the micrometer cover? The micrometer covers a measuring range of 25–50 mm, suitable for external measurement of machined components and precision parts. Is the device delivered calibrated? Yes, the instrument is supplied with an ISO 17025 calibration certificate, ensuring traceable results and immediate use in accredited workflows. How can measurement data be exported? Data can be exported wirelessly to the MDS app (Windows, Android, iOS, macOS), via USB HID or wireless HID modes; MODBUS RTU is available as an optional interface for PLCs and industrial systems. What environmental protection does the instrument offer? The micrometer has an IP65 protection rating and a CNC‑machined aluminium housing, providing resistance to dust and splash environments commonly encountered on the shopfloor. How many readings can be stored locally before transfer? Local storage holds up to 2000 values, with folder organisation and basic statistics to support batch inspections and later data synchronisation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Digital Micrometer With Colour Touchscreen, Wireless USB, IP65, ISO17025 Cal Cert - Microtech Metrology
Benefit from a traceable, shop‑ready measurement solution that combines ISO 17025 calibration, wireless and USB data transfer and robust IP65 protection to keep inspection tasks fast and reliable on the shop floor. Order this digital micrometer through Metav Werkzeuge or contact our consultants for tailored advice. Digital micrometer (Messschraube) — Microtech Metrology; colour touchscreen & wireless/USB Digital micrometer for precision measurements in the micro range, designed for industrial inspection and machine‑shop integration ISO 17025 calibration certificate included Wireless and USB data output options IP65 aluminium housing, CNC machined 0.003 mm high-precision measurement Trusted accuracy and documented traceability for routine inspection The digital micrometer delivers repeatable results where traceability matters: a declared accuracy of 0.003 mm and an included ISO 17025 calibration certificate ensure measurements are verifiable for quality records. For workshops and small laboratories that require documented conformity, the calibrated instrument provides a direct link between a measurement and its legal calibration status. The compact measuring range places this gauge in the micro category (25–50 mm), making it well suited to fine mechanical parts and precision components where short, stiff anvils reduce bending and contribute to measurement stability. Seamless data flow to support process control and Industry 4.0 Built for connectivity, the instrument supports wireless transfer plus USB HID and optional industrial interfaces, easing integration into data‑collection workflows and statistical process control. Onboard storage for 2000 values, folder management and a statistics mode allow local batch collection; simultaneous features such as Go/NoGo, Max/Min, linear and temperature correction reduce downstream processing. The colour 2.4‑inch touchscreen makes configuration intuitive on the shop floor, while standard protocols and optional MODBUS RTU (RS‑485) permit direct feeding into measurement systems or MES, saving time and reducing transcription errors. Robust design crafted for everyday shop conditions A CNC‑machined aluminium housing and IP65 protection keep electronics safe against coolant spray and dust, extending service life in harsher environments. Anvil dimensions of 6.5 x 0.75 mm provide a restrained contact geometry ideal for small features, while the instrument’s construction and measured accuracy combine to reduce operator influence on results. Practical functions such as probe mode, 2D graphing and compensation routines help technicians and inspectors obtain meaningful results quickly, with fewer adjustments and less rework. Discuss how Microtech Metrology’s ISO 17025‑calibrated digital micrometer can enhance inspection reliability at your site — contact Metav Werkzeuge for a personalised recommendation and local support Technical data Article number: 110660508 GTIN: 4061905457272 Manufacturer: Microtech Metrology Calibration certificate: ISO 17025 (Ilac MRA) included Core specifications Measuring range: 25–50 mm Accuracy: 0.003 mm Display: Colour 2.4‑inch touchscreen Memory: 2000 values Protection class: IP65 Features and materials Housing: CNC machined aluminium Data output: Wireless + USB; optional MODBUS RTU (RS‑485) Anvils: 6.5 x 0.75 mm Functions: On‑line graph, Go/NoGo, Max/Min, formula, timer, linear & temperature correction FAQ Is the micrometer supplied with a calibration certificate? Yes. The digital micrometer from Microtech Metrology is delivered with an ISO 17025 calibration certificate (Ilac MRA), providing traceable proof of conformity for quality systems. Which data outputs are available for automated collection? Data can be transferred wirelessly or via USB HID; an optional MODBUS RTU (RS‑485) interface is available for industrial networks to integrate directly with process control systems. What measurement range and accuracy does the instrument offer? This instrument covers a 25–50 mm range with a declared accuracy of 0.003 mm, making it suitable for micro‑range precision tasks. Can the device be used on the shop floor rather than a clean lab? Yes. The aluminium housing is CNC machined and rated IP65, which protects the electronics from dust and splashes typical in machine‑shop environments. What model identification should be quoted when enquiring? Please reference the digital micrometer by Microtech Metrology, SKU 110660508, when contacting sales or support. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Digital Micrometer With Large Anvil, 0.01mm Resolution, Ratchet, Supplied In Case - Metav IndustryLine
There are conflicting technical data in the product record that prevent the generation of a reliable product description. The item’s display resolution is indicated in one place as 0.001 mm while elsewhere it is shown as 0.01 mm, and the product weight appears as 0.9 kg in one field but 0.49 kg on the label. These discrepancies affect core specifications that determine classification, tolerance statements and suitability for precision tasks. Until the correct, consistent values are confirmed, a factual, trustworthy description and any warranty of suitability cannot be produced. Please review and reconcile the resolution and weight entries so a complete product text can be created. If required, Metav can be contacted for clarification at info@metav-werkzeuge.com or +49 2822 7131930.
25-50mm Digital Micrometer With Ratchet, 0.001mm Resolution, IP65 Protection - Metav IndustryLine
The combination of 0.001 mm resolution, IP65 protection and a ratchet stop ensures repeatable, workshop-ready measurement results; order directly via Metav Werkzeuge or consult our specialists for exact fit and delivery. Digital Micrometer M302.295 — 25–50 mm, IP65, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometer M302.295 is a robust, industrystandard micrometer for precision external measurements in small to medium components, designed for demanding workshop and production environments. 0.001 mm display resolution IP65 protection for workshop use Integrated ratchet for consistent measuring force Four-button display with ABS and HOLD Accurate measurements that reduce rework With a measuring range of 25–50 mm and a display resolution of 0.001 mm, this instrument delivers fine increments suitable for high-precision tasks. The ratchet stop ensures a reproducible measuring force, reducing operator-induced variation and improving process reliability. Classified in the micro size category (max. 100 mm), the tool offers the best balance of reach and stiffness for small assemblies and precision components, while compliance with DIN 863 underlines its suitability for standardised quality workflows. Workshop protection and reliable data capture Designed for everyday industrial use, the instrument is sealed to IP65, protecting the electronics and measurement system from dust and water jets during routine handling and cleaning. The built-in RB 4 data output enables straightforward attachment to data-collection systems or inspection software, supporting digital traceability in quality control processes. This combination of environmental protection and digital connectivity helps integrate measurements into production documentation and reduces manual transcription errors. Clear handling and fast readings for production environments The digital readout features a four-button display with ON/0-, unit switching (mm/inch), ABS zeroing and HOLD functions, which speeds up repetitive checks and simplifies mixed-unit workflows. The instrument’s measuring faces (6.5 mm) provide a stable contact area for secure readings on shafts and small flanges. As a digital micrometer, it replaces slower analogue procedures and supports faster inspection cycles, which translates into improved throughput and fewer downstream corrections. For dependable, workshop-ready precision choose the Metav IndustryLine Digital Micrometer M302.295 and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M302.295 GTIN: 4054469115627 Category: Messschrauben / Micrometers eClass: 21170328 ETIM: EC003590 Facts Measuring range: 25–50 mm Resolution (display): 0.001 mm Measuring faces: 6.5 mm Protection class: IP65 Norm: DIN 863 Special features Digital display with ON/0-, mm/inch, ABS, HOLD Ratchet stop for consistent measuring force Data output: RB 4 Digital instrument (electronic readout) Suitable for workshop and production environments FAQ What measuring range does the micrometer cover? The Digital Micrometer M302.295 covers an external measuring range of 25–50 mm, suitable for small components and precision parts. What is the display resolution and how precise are readings? The instrument provides a resolution of 0.001 mm, enabling very fine incremental readings appropriate for precise quality-control tasks. Is the micrometer protected for use in a workshop? Yes. The device is rated IP65, offering protection against dust ingress and water jets typical in workshop environments. Does the micrometer offer digital output for data collection? The micrometer includes a RB 4 data output for connection to external data-capture or inspection systems to support digital documentation. Which handling aids are integrated for repeatable readings? A ratchet stop is built into the instrument to ensure a reproducible measuring force, and the four-button display includes ABS zeroing and HOLD for stable, repeatable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Micrometer With Ratchet, IP65, Matt Chrome Measuring Drum, Case - Metav IndustryLine
Benefit from robust workshop performance thanks to IP65 protection, a tactile ratchet for repeatable measuring force and a high-resolution 0.001 mm display — combine durable construction and precise readings for reliable quality control. Order the outside micrometer directly via Metav Werkzeuge or ask our consultants if needed. Bügelmessschraube — Digital outside micrometer, 25–50 mm, IP65 (Metav IndustryLine) A Bügelmessschraube designed for accurate external measurements in metalworking and precision maintenance, presented as a compact, dust‑ and splash‑resistant gauge. Digital display with ABS/INC/SET/UNIT buttons Measuring range 25–50 mm IP65 protection against dust and water Ratchet for reproducible measuring force Precision where repeatability matters The digital outside micrometer delivers fine resolution of 0.001 mm, enabling confident differentiation between tight tolerances on finished parts. The integrated ratchet mechanism standardises the contact pressure, reducing operator influence and improving reproducibility for serial checks. The instrument’s hardened measuring faces (Ø 6.5 mm) maintain dimensional integrity over prolonged use, which reduces wear-related drift and supports consistent go/no‑go decisions on the shop floor. Built for workshop conditions and simple handling A robust frame with a lacquered finish and a matt‑chrome measuring drum combine corrosion resistance with low glare for easy reading under workshop lighting. The IP65 rating protects the electronics from dust ingress and low‑pressure water jets, making the tool suitable for demanding environments where contamination or coolant spray is a concern. At approximately 0.5 kg, the instrument balances solid feel with manageable handling during frequent measurements, aiding efficient inspection routines. Fast assessment and standards alignment The bright digital display with ON/OFF, ABS/INC, SET and UNIT functions accelerates measurement, zeroing and unit switching, which shortens inspection cycles and reduces transcription errors. Compliance with DIN 863 provides a normative reference for geometry and marking, simplifying documentation in quality control processes. Together, these features support pragmatic efficiency gains: fewer measurement repeat cycles, quicker decisions and a lower risk of costly rework. Contact Metav Werkzeuge for technical consultation and bespoke delivery options on the Metav IndustryLine digital micrometer M302.275, available from our Emmerich location for prompt supply and expert advice. Technical data Article number: M302.275 GTIN: 4054469115542 Category: Messschrauben Manufacturer: Metav IndustryLine Protection class: IP 65 Norm: DIN 863 Numbers / Core technical data Measuring range: 25–50 mm Resolution/readout: 0.001 mm Measuring faces Ø: 6.5 mm Weight: 0.5 kg TARIC / customs code: 90173000 Special features Digital display with ON/OFF, ABS/INC, SET, UNIT buttons Ratchet for reproducible measuring force Lacquered frame Matt‑chrome measuring drum Hardened measuring faces FAQ What measuring range does the instrument cover? The Metav IndustryLine outside micrometer M302.275 covers 25–50 mm, suitable for small to medium external diameter checks. What is the resolution and how fine are the readings? Readings are shown with a resolution of 0.001 mm, displayed on the digital readout of the M302.275. Is the micrometer suitable for workshop use with coolant or dust? Yes — the device carries an IP65 rating, so the electronics are protected against dust and low‑pressure water jets, making it robust for workshop environments. Are the measuring faces durable for repeated use? The measuring faces are hardened and 6.5 mm in diameter, providing long‑term wear resistance and stable contact geometry for repeat measurements. Does the tool follow a recognised standard? The instrument is produced in accordance with DIN 863, which covers dimensional and marking requirements for such gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Micrometer With Thin Tips, Colour Touchscreen, Wireless USB, IP65, ISO17025 - Microtech Metrology
Take advantage of the combination of high-resolution measurement, wireless data transfer and an ISO 17025 calibration certificate for reliable traceability in fine‑mechanical work — order the device directly via Metav Werkzeuge or contact the consultants for application advice. Micrometer 25–50 mm — Digital, Microtech Metrology The micrometer is a compact, workshop-ready measuring instrument for precise external measurements in the 25–50 mm range, featuring small Ø2 mm measuring faces and a touchscreen display for intuitive readout. ISO 17025 calibration certificate included Wireless and USB data transfer IP65 workshop protection Small Ø2 mm measuring faces Precise measurements with laboratory traceability This measuring instrument delivers measurable reliability thanks to ISO 17025 certification and a factory calibration certificate that accompanies the tool. The combination of accuracy 0.003 mm and a fine resolution 0.0001 mm enables repeatable results for demanding quality checks. The calibration documentation supports incoming inspection and audit trails, providing an objective basis for process control and supplier validation. Effortless data handling for Industry 4.0 workflows Equipped with Wireless and USB data outputs and a modern memory manager storing 2000 values, the device integrates smoothly into digital measurement routines. Online graphic and statistical modes, plus optional MODBUS RTU for industrial networks, reduce manual transcription and accelerate data logging. The large 2.4" colour touchscreen simplifies mode selection and makes numeric and graphical readouts immediately actionable for production staff. Robust design for frequent workshop use Built from a CNC‑machined aluminium block and rated IP65, the instrument tolerates everyday exposure to coolant mist and shop dust while remaining lightweight for single‑handed operation. Practical details such as a friction ratchet and a rotating measuring spindle improve repeatability by standardising the applied measuring force. The small Ø2 mm measuring faces are tailored for tight radii and precision parts, making the device ideal for fine mechanical assemblies and watch‑style components. For traceable precision in micro measurements choose Microtech Metrology’s digital micrometer — order via Metav Werkzeuge for prompt delivery and expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 110650508 GTIN: 4061905040511 Manufacturer: Microtech Metrology Calibration: ISO 17025 certificate included Core data Measuring range: 25–50 mm Resolution: 0.0001 mm Accuracy: 0.003 mm Measuring faces: Ø2 mm Protection class: IP65 Special features Colour 2.4" touchscreen display Wireless and USB data transfer Memory: 2000 values, folders, statistics CNC‑machined aluminium housing Friction ratchet; rotating measuring spindle Optional MODBUS RTU data output FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 25–50 mm, suitable for micro and fine mechanical tasks. Is the instrument delivered calibrated and traceable? Yes, the device is supplied with a calibration certificate carried out to ISO 17025, ensuring full traceability and documented measurement uncertainty. How can measurement data be exported? Data export is possible via Wireless and USB; the instrument also supports HID modes and optional MODBUS RTU for integration into industrial systems. What workshop conditions can the micrometer withstand? With an IP65 rating and a robust CNC‑machined aluminium body, the micrometer resists dust and light spray, making it suitable for typical workshop environments. Are the measuring faces suitable for small features? Yes, the small Ø2 mm measuring faces and the rotating spindle are designed for precise contact on tight radii and small components. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Digital Thread Micrometer Without Anvils 60° Setting, 0.001mm Resolution, RB 4.1 Data Output - Metav IndustryLine
Take advantage of precise thread measurement, a high-resolution digital readout and reproducible measuring force for reliable inspection results; order directly via Metav Werkzeuge or consult our specialists for application support. Digital thread micrometer M302.192.D – digital, 25–50 mm range, 60° setting The Digital thread micrometer M302.192.D is a precision measuring instrument for external threads in the 25–50 mm range, designed for workshop and QA tasks where repeatable, data-capable results are required Digital display, 0.001 mm resolution Measuring range 25–50 mm Ratchet stop for reproducible measuring force Non-rotating spindle for accurate thread contact Precise measurement that supports reliable decisions This instrument delivers a clear digital display with 0.001 mm reading steps and an accuracy specified at ±0.008 mm, enabling confident allowance decisions and quality control documentation. The device’s non-rotating spindle ensures the contact surface meets the workpiece without twisting the profile, which is especially important when checking thread form or flank diameters. The integrated ratchet mechanism provides a consistent measuring force, reducing operator-induced variation and improving repeatability across sample series. Data-capable design for modern inspection workflows Equipped with RB 4.1 data output and an intuitive display controller (ON/OFF, ABS/INC, UNIT and SET keys), the micrometer supports digital data capture and simple integration into inspection routines. This reduces transcription errors and accelerates traceability in production reports. The compact, lightweight construction and modest 0.4 kg mass make it convenient for bench use or portable checks, while the 60° setting gauge compatibility allows rapid set-up for thread form referencing. Compact size, high-precision category: ideal for fine work With a measuring span of 25–50 mm, the instrument sits in the compact precision category suitable for micro components and detailed thread inspection. Its dimensions favour applications where close tolerances and minimal instrument deflection matter, such as small subassemblies, mechanical fittings and precision fasteners. Supplied without interchangeable inserts, the device is configured for direct contact checking across its nominal range, streamlining workflows where a single-gauge setup is sufficient. Practical handling and fit for workshop use The micrometer’s ergonomics combine a firm grip, a ratchet stop and a robust measuring spindle of 6.5 mm diameter to withstand repeated use in production environments. The visible digital readout accelerates cycle times compared with purely mechanical alternatives, while the solid construction supports durability under regular inspection duties. Together these attributes reduce rework and downtime by delivering fast, reproducible results suited to machine shops and quality departments. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Metav IndustryLine digital thread micrometer with RB 4.1 output; call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M302.192.D GTIN: 4054469115160 Manufacturer: Metav IndustryLine Category: Thread micrometers / Measuring instruments Weight: 0.4 kg Facts Measuring range: 25–50 mm Resolution: 0.001 mm (display) Accuracy: ±0.008 mm Measuring spindle diameter: 6.5 mm Data output: RB 4.1 Tariff number: 90173000 Special features Digital display with ON/OFF, ABS/INC, UNIT and SET keys Ratchet stop for reproducible measuring force Non-rotating spindle for accurate contact Supplied without interchangeable inserts 60° setting gauge compatibility Compact precision category (25–50 mm) FAQ What measurement range does this micrometer cover? The device covers a measuring range of 25–50 mm and is intended for external thread checks within that span. What resolution and accuracy can be expected? The digital readout provides a resolution of 0.001 mm and an accuracy of ±0.008 mm as specified for the instrument. Is the spindle designed to rotate during measurement? No, the spindle is non-rotating to ensure correct contact with the thread profile and to avoid disturbing the workpiece. Does the micrometer output measurement data for recording? Yes, the tool features an RB 4.1 data output for digital capture of measured values. Are interchangeable inserts included with delivery? The instrument is supplied without inserts; it is configured for direct measuring across the 25–50 mm setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Uni Micrometer With 7 Replaceable Tips, 0.001 mm Resolution, Non-Rotating Spindle, Supplied In Case - Metav IndustryLine
Precision, robustness and ease of use come together in a compact instrument: the high-resolution 0.001 mm digital readout and a non-rotating spindle deliver repeatable results, while the set of seven pairs of interchangeable measuring anvils expands application range — order the micrometer directly via Metav Werkzeuge or consult the specialist advisors if clarification is required Digital Uni Micrometer M302.041.D — 25–50 mm, 0.001 mm resolution (Metav IndustryLine) Digital Uni Micrometer M302.041.D is a workshop-grade digital micrometer for accurate external measurements in the 25–50 mm range, supplied with seven pairs of specialised interchangeable measuring anvils High resolution 0.001 mm digital readout Supplied with seven pairs of interchangeable anvils Non-rotating spindle for stable measurements Ratchet stop for reproducible measuring force Reliable high-resolution measurement for detailed engineering tasks The instrument combines a digital readout with 0.001 mm resolution and an industrially tuned error band of ±0.008 mm, providing a measurable improvement in first-pass accuracy for production and inspection work. The device’s non-rotating spindle reduces measurement artefacts caused by surface friction or part movement, making readings more consistent across repeated checks. The integrated ratchet stop enforces a uniform measuring force so that each contact is comparable, which is particularly valuable when assessing batches or adjusting tool offsets. Flexible interfacing and practical accessories to speed workflows Equipped with a data output labelled RB 4.1 and a clear display featuring ON/OFF, ABS/INC, UNIT and SET controls, the micrometer supports simple data capture and transfer to inspection software or logging devices. The delivery includes seven pairs of interchangeable measuring anvils, enabling adaptation to a wide variety of external geometries without resorting to improvised fixtures. A robust painted frame and a matt‑chrome measuring drum balance durability with low reflectivity for comfortable reading under workshop lighting. Built for everyday reliability and workshop integration Designed as a compact specialist tool for the 25–50 mm measuring range, this model sits in the micro category of workshop micrometers where stiffness and fine control matter most. The 6.5 mm spindle diameter and solid construction keep deflection to a minimum while the instrument remains easy to handle; the total mass is approximately 0.7 kg, aiding stable one‑hand operation. Supplied with matching measuring inserts and a protective transport case, the unit is ready for secure storage and routine use on the shop floor or at the inspection bench. Select the Metav IndustryLine Digital Uni Micrometer for dependable, high-resolution external measurements — contact Metav Werkzeuge in Emmerich for ordering and tailored technical advice Technical Data Article number: M302.041.D GTIN: 4054469114118 Tariff code: 90173000 Norm: Werksnorm Facts Measurement range: 25–50 mm Resolution: 0.001 mm Accuracy: ±0.008 mm Spindle diameter: 6.5 mm Weight: 0.7 kg Special features Digital display with ON/OFF, ABS/INC, UNIT, SET buttons Data output: RB 4.1 Non-rotating spindle Ratchet stop for consistent measuring force Supplied with seven pairs of special measuring inserts Frame painted and measuring drum matt chrome-plated Delivered in a protective transport case FAQ What measurement range does this micrometer cover? The Metav IndustryLine micrometer covers a measuring range of 25–50 mm, suitable for precise external dimensions within that band. Is the spindle rotatable or fixed during measurement? This model features a non-rotating spindle, which stabilises contact and reduces measurement variation caused by spindle rotation. What resolution and accuracy can be expected? The digital readout provides a 0.001 mm resolution, with an instrument accuracy of approximately ±0.008 mm as specified for the unit. Are special anvils included for different part shapes? Yes — the instrument is supplied with seven pairs of interchangeable measuring inserts to adapt to various external geometries and ensure correct seating on profiled workpieces. Does the micrometer offer data output for logging measurements? A data interface with designation RB 4.1 is provided, enabling connection to suitable data capture systems for traceable measurement recording Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Disc Anvil Micrometer Ø30mm Painted Frame, Chrome-Plated Thimble, Ratchet, Supplied in Case - Metav IndustryLine
This micrometer delivers measurable gains in workshop reliability: precise 0.004 mm accuracy across a compact 25–50 mm range combined with a ratchet stop ensures repeatable measuring results. Supplied in a transport case and finished with a matt‑chrome drum for durable, low‑glare reading — order directly via Metav Werkzeuge or contact our consultants for specification advice. Teller‑Face Micrometer M309.351 – 25–50 mm range with 30 mm disc anvil (Metav IndustryLine) Teller‑Face Micrometer M309.351 is a compact, analogue micrometer for fine mechanical and workshop metrology, designed for precise external measurements on small to medium components. Compact micro class for fine mechanical work High repeatability with ratchet stop 30 mm disc anvil for stable contact Non‑rotating spindle to avoid surface marks Supplied in a transport case for safe handling Precision that reduces rework and saves time The M309.351 is engineered for consistent accuracy in routine inspection tasks. With a specified accuracy of 0.004 mm and a reading of 0.01 mm, this analogue instrument provides a reliable measurement basis for quality control and setup operations. The ratchet stop ensures uniform measuring force, which reduces operator‑induced variation and helps maintain production tolerances. Classified as micro class (maximum range within 10–100 mm), it is particularly suitable where compactness and stiffness matter, such as watchmaking, instrument parts and fine mechanical assemblies. Robust construction and low‑fatigue operation A painted frame combined with a matt chrome‑plated measuring drum gives the micrometer both visual durability and reduced glare at the scale — improving legibility under bright workshop lighting. The non‑rotating spindle minimises surface damage on delicate parts during measurement, while the 30 mm disc anvil increases contact area for improved stability on flat or slightly contoured surfaces. Weighing 0.6 kg, the tool balances solidity and manoeuvrability for single‑handed use on benches or on the machine shop floor. Practical calibration and traceability for production use This analogue micrometer is delivered ready for use and is supplied in a protective transport case, making it straightforward to include in mobile inspection kits or tool drawers. Standard calibration is applied prior to dispatch, offering immediate usability for routine checks and first‑piece inspections. The familiar thimble and drum reading method keeps measurement procedures transparent to trained staff and simplifies documentation in inspection reports. Ideal applications and real‑world benefits Designed for external measurements, the instrument excels on small housings, shafts and turned parts where a stable contact face is needed. The combination of a disc anvil and ratchet stop reduces rework by giving reproducible results from the first measurement, while the matt chrome finishing and painted frame extend lifetime under workshop conditions. For operations seeking a compact, high‑repeatability gauge, this micrometer offers a practical balance of precision, robustness and ease of handling. For reliable precision from Metav IndustryLine, contact Metav Werkzeuge for ordering and technical consultation — Metav Werkzeuge provides practical expertise from Emmerich and can advise on integration into workshop inspection routines. Technical data Article number: M309.351 GTIN: 4054469118789 Category: Messschrauben (micrometers) Manufacturer: Metav IndustryLine Facts Measuring range: 25–50 mm Accuracy: 0.004 mm Reading / resolution: 0.01 mm Anvil diameter: Ø 30 mm Weight: 0.6 kg Special features Painted frame Measuring drum matt chrome‑plated Ratchet stop included Non‑rotating spindle Analogue / mechanical design Supplied in a transport case FAQ What measuring range does this micrometer cover? The M309.351 covers a 25–50 mm measuring range, placing it in the micro class for compact, high‑precision external measurements. How precise is the instrument for inspection tasks? This analogue micrometer is specified with an accuracy of 0.004 mm and a reading of 0.01 mm, suitable for workshop quality control and setup work requiring reliable repeatability. Why is the disc anvil useful compared with a small point anvil? The 30 mm disc anvil provides a larger contact surface, improving stability and reducing local deformation on softer parts during measurement. Does the spindle rotation affect surface finish? The device features a non‑rotating spindle, which prevents the spindle turning against the measured surface and so reduces the risk of marking delicate components. Is the micrometer protected for transport or storage? Yes — the metre is supplied in a transport case to protect the instrument during transport and when stored with other tools. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Groove Measuring Bore Gauge With Friction Ratchet, 0.01mm Graduation, Supplied In Case - Metav IndustryLine
Taking advantage of a compact analogue micrometer with a 25–50 mm measuring range and ±0.005 mm accuracy ensures precise groove measurements with reproducible results; combined with a friction ratchet and a non-rotating spindle, the instrument delivers consistent contact force and reduced surface marking—order or request advice via Metav Werkzeuge for application support. M307.022 – Analogue micrometer for groove measurement, 25–50 mm, ±0.005 mm M307.022 is a precision analogue micrometer designed for reliable groove and slot measurement in fine mechanical and micro-assembly applications, combining a compact form factor with workshop-grade repeatability. Analogue readout with 0.01 mm graduation Accuracy rated at ±0.005 mm Friction ratchet for uniform measuring force Supplied in a protective transport case Precision where small differences count This analogue micrometer places emphasis on measurement accuracy and repeatability. The instrument’s measuring range of 25–50 mm and its fine reading of 0.01 mm permit confident sizing of grooves and slots in small components. The stated accuracy of ±0.005 mm positions this gauge for demanding inspection tasks where tolerances are tight; the specification supports process control in precision workshops and small-batch production. The compact design corresponds to the micro-class range, making it particularly suited to fine mechanical and watchmaking tasks. Design features that improve repeatability Built to reduce operator-related variation, the micrometer includes a friction ratchet and a non-rotating spindle, which together ensure consistent contact force and prevent surface damage when measuring delicate parts. The spindle pitch of 0.5 mm gives predictable advance per turn, while the measuring faces 0.75 x 6.5 mm concentrate the contact area for access into narrow grooves. These mechanical decisions translate into fewer re-measures and a higher first-pass acceptance rate on small assemblies. Robustness and workshop usability The instrument is an analogue micrometer with a classic frame and hardened measuring surfaces; its mechanical simplicity supports long service intervals and straightforward maintenance. Delivery in a protective transport case safeguards calibration and geometry during storage and transit. The clear mechanical scale and tactile ratchet make the gauge easy to handle on the bench or in the inspection bay, while the stout frame minimises twist under normal use, preserving measurement integrity. Application focus and suitability Engineered for groove and slot measurement, this micrometer is particularly effective in applications where compact form and high precision are required: micromechanics, small tooling, and precision fixturing. The combination of fine resolution, a controlled contact mechanism and small measuring faces makes the instrument well matched to tasks where access and surface preservation are important. For traceable or accredited calibration needs, specifications should be checked before procurement. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the M307.022 analogue micrometer from Metav IndustryLine Technical data Article number: M307.022 GTIN: 4054469117270 Eclass: 21170328 ETIM: EC003590 Tariff code: 90173000 Facts Measuring range: 25–50 mm Reading (graduation): 0.01 mm Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 x 6.5 mm Special features Analogue micrometer for groove measurement Friction ratchet for consistent measuring force Non-rotating spindle to protect surfaces Supplied in protective transport case Analogue mechanical scale FAQ What is the measuring range of this micrometer? The M307.022 micrometer covers a measuring range of 25–50 mm. What resolution and accuracy does the instrument offer? The micrometer has a reading of 0.01 mm and an accuracy of ±0.005 mm. Does the micrometer include a friction ratchet and non-rotating spindle? Yes, the M307.022 features a friction ratchet and a non-rotating spindle to ensure repeatable contact and to minimise marking of measured surfaces. Is the instrument supplied ready for transport? The micrometer is supplied in a protective case for safe transport and storage. Is accredited ISO 17025 calibration included? No ISO 17025 accreditation is indicated for this item in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Micrometer Caliper Large Drum With Friction Ratchet, Matt Chrome Sleeve, DIN 863 - Metav IndustryLine
Take advantage of the combination of reliable repeatability, robust construction and clear mechanical reading for straightforward workshop measurement tasks; the large matt‑chrome drum and friction ratchet ensure consistent contact force and repeatable results. Order the Metav IndustryLine M304.249 outside micrometre directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine M304.249 — Outside micrometre, 25–50 mm, large matt‑chrome drum & friction ratchet The Metav IndustryLine M304.249 outside micrometre is a mechanical 25–50 mm instrument designed for routine workshop and quality checks where repeatable measuring force and durable components are required. Large matt‑chrome measuring drum Friction ratchet for repeatable force Hardened measuring faces included Complies with DIN 863 standard Consistent results thanks to repeatable measuring force The central advantage of this mechanical micrometre is its friction ratchet, which limits user‑applied force and thus improves repeatability across multiple measurements. With a standard reading of 0.01 mm, the instrument delivers the resolution expected in workshop metrology while complying with DIN 863, so results are traceable to common industrial expectations. The 25–50 mm range covers most small‑component measurements, offering a balance between reach and rigidity that supports reliable thickness and diameter checks in production and inspection routines. Durable build and glare‑free handling for daily use Designed for everyday handling, the micrometre features a matt‑chrome drum that reduces surface reflections and eases visual reading in brightly lit environments. The measuring faces are hardened, extending service life and maintaining dimensional integrity under frequent contact with metal parts. At approximately 0.7 kg, the instrument feels substantial yet manageable on the workbench; it is supplied in a protective case (plastic or wooden, depending on transport needs) to prevent damage during storage and transit. Together, these design choices lower life‑cycle costs and reduce the need for premature replacement. Clear mechanical specification for fast integration into workflows The instrument is a mechanical (analog) micrometre with a spindle pitch of 1 mm and a precision spindle diameter that supports stable operation. Its simple, tactile operation makes it suitable for standard workshop quality control and toolroom tasks where digital interfaces are not required. The combination of a robust drive mechanism and a friction control ensures that measurements are repeatable and reproducible, which helps maintain consistent process control across shifts. The pragmatic design supports quick familiarisation for technicians and fits seamlessly into existing inspection routines. Choose the Metav IndustryLine M304.249 outside micrometre for dependable, repeatable measurements and contact Metav Werkzeuge in Emmerich for order and technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M304.249 GTIN: 4054469116563 Category: Outside micrometre (mechanical) Core specifications Measuring range: 25–50 mm Reading / resolution: 0.01 mm Weight: 0.7 kg Spindle pitch: 1 mm Measuring spindle diameter: 8 mm Design & special features Measuring drum: matt‑chrome plated Friction ratchet for repeatable force Hardened measuring faces Standard: DIN 863 Delivered in protective case (plastic or wooden) FAQ What measuring range does the micrometre cover? The instrument covers a measuring range of 25–50 mm, making it suitable for small to mid‑sized components typically encountered in workshop and inspection tasks. What accuracy and resolution can be expected from this mechanical micrometre? This mechanical micrometre offers a resolution of 0.01 mm and is manufactured to meet DIN 863, ensuring performance appropriate for routine quality control and workshop use. How does the friction ratchet help with measurements? The friction ratchet on the micrometre limits the applied spindle force, helping to achieve consistent contact pressure across measurements and therefore improving repeatability of results. Are the measuring faces durable enough for metalworking use? Yes, the measuring faces are hardened, which increases wear resistance when measuring metallic components and prolongs the instrument’s service life. Is the micrometre supplied ready for use and how is it protected during transport? The micrometre is supplied in a protective case (plastic or wooden, depending on transport requirements) to avoid damage during transit and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Micrometer Screw Gauge With Digital Touchscreen Readout, ISO 17025 Calibrated - Microtech Metrology
Benefit from precision, reliable data transfer and accredited calibration: high-resolution measurement to 0.003 mm, Wireless+USB output and an ISO 17025 calibration certificate ensure measurable quality and traceability. Order the device directly via Metav Werkzeuge or consult our specialists for integration advice. Thread Micrometer (Whitworth 55) — Digital 2.4" Touchscreen, Microtech Metrology The Thread Micrometer (Whitworth 55) is a digital instrument engineered for precise inspection of Whitworth-thread profiles in workshops and inspection labs, combining handheld ergonomics with laboratory-grade traceability. Wireless+USB data transfer 2.4" colour touchscreen display 25–50 mm measuring range ISO 17025 fully calibrated delivery High-precision measurement for small, critical threads This instrument delivers a measurement accuracy of 0.003 mm across its 25–50 mm range, with a fine-reading resolution of 0.0001 mm, making it suited to demanding thread inspection tasks. Classified in the micro category for compact measuring tools, it balances stiffness and reach for fine mechanical components and small assemblies. The calibrated mechanism includes a non-rotating spindle, which preserves the thread profile during measurement and reduces operator-induced error. The result is repeatable, comparable data that supports quality control in production and during incoming inspection. Purpose-built for thread profile inspection and workshop use Designed specifically for Whitworth-type threads, the micrometer accepts dedicated anvils and features thread-compatible measuring faces, supplied here as 10 anvils (60–3.5 TPI) for the Whitworth 55 profile. The instrument’s form factor and tactile feel are optimised for routine shop-floor use while still providing the stability expected in a metrology environment. The digital readout and sturdy construction speed up common tasks such as batch sampling and first-article checks, turning a specialist gauge into a practical everyday tool without sacrificing measurement integrity. Integrated data workflow and operator efficiency Measurement values are output via Wireless+USB, enabling seamless transfer to inspection software or a shop-floor database and reducing transcription errors. The 2.4" colour touchscreen shows clear numeric readouts and simple menus for zeroing and unit selection, shortening operator training time and improving process efficiency. Where traceability to production records is required, the digital interface supports straightforward logging of results; this rational integration into existing quality systems accelerates decision-making and reduces rework. Accredited calibration and traceability for regulated environments Delivered fully calibrated to ISO 17025, the micrometer arrives with a traceable calibration certificate suitable for audit and conformity evidence. The included calibration documentation confirms the instrument’s performance and shortens the ramp-up time for formal inspection routines. Microtech Metrology’s electronic thread gauge thus combines workshop practicality with certified measurement assurance, supporting both routine quality control and higher-tier conformity requirements. For tailored advice on integrating Microtech Metrology’s ISO 17025‑calibrated thread micrometer into inspection routines, contact Metav Werkzeuge for technical consultation and supply options Technical Data Article number: 110720508 GTIN: 4061905457241 Manufacturer: Microtech Metrology Type: Whitworth 55 Accessories included: 10 anvils 60–3.5 TPI (Whitworth 55) Core measurements Measuring range: 25–50 mm Resolution: 0.0001 mm Measurement accuracy: 0.003 mm Display: Colour 2.4" touchscreen Special features Data output: Wireless+USB Digital instrument Non-rotating spindle ISO 17025 calibration certificate included Suitable for Whitworth thread inspection FAQ How precise is the micrometer for thread measurement? The Thread Micrometer delivers an accuracy of 0.003 mm with a resolution of 0.0001 mm, providing fine control for thread inspection tasks. Is the device ready for use in audited quality systems? Yes, the instrument is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audits. Which thread types are supported with the supplied accessories? The micrometer is supplied with 10 anvils for the Whitworth 55 profile (60–3.5 TPI), matching the Whitworth thread geometry for accurate profiling. How are measurement results exported? Measurement data is exported via Wireless+USB, allowing direct transfer to inspection software or external databases for logging and analysis. Does the spindle rotate during measurement and could this affect threads? The instrument features a non-rotating spindle to avoid damaging thread profiles and to reduce measurement variation caused by spindle rotation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Micrometer Screw With 20mm Disc Faces, Digital Readout 0.001mm, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a compact, traceable measuring solution that combines a 0.001 mm resolution, ±0.004 mm accuracy and ISO 17025 calibration for reliable quality control; order directly via Metav Werkzeuge or consult our specialists for application advice. Micrometer — digital micrometer with Ø20 mm disc anvils, high-precision and ISO 17025 calibrated (Microtech Metrology) The micrometer is a digital external measuring instrument designed for precise checks on flat and slightly curved components within the 25–50 mm range. Digital readout with mode and unit keys ISO 17025 calibration and certificate included Ø20 mm disc anvils for flat and delicate surfaces Resolution 0.001 mm with ±0.004 mm accuracy Accurate, certified measurements that reduce rework The combination of a high-resolution digital readout and a verified calibration process means inspection results are both precise and traceable. With a resolution of 0.001 mm and a stated accuracy of ±0.004 mm, the instrument supports repeatable decision-making in production and incoming inspection. The included ISO 17025 certificate documents the calibration under recognised laboratory standards, which simplifies audit preparation and ensures measurement results are accepted across suppliers and customers. Geometry-friendly contact for delicate components The larger Ø20 mm disc anvils distribute contact force more evenly than point-style tips, reducing surface indentation when measuring soft or coated parts. A non-rotating measuring spindle further protects finished surfaces by avoiding rotational abrasion during closing. These design choices make the instrument suitable for components with thin platings, delicate finishes or small fillets where standard flat anvils would risk damage, while the 25–50 mm measuring range covers common shaft and collar dimensions found in mechanical assemblies. Efficient operation and clear data handling The display features 0/MODE, SET, UNIT and HOLD keys for quick unit changes and stable readings when transferring results to inspection records. Fast, unambiguous readout reduces cycle time at the inspection bench and minimises transcription errors during quality checks. Built for workshop and laboratory environments, the instrument supports a steady measurement workflow and integrates well into existing inspection routines that require rapid, reliable external dimension checks. For traceable high-precision external measurements, request the Microtech Metrology digital micrometer (SKU 110780501) from Metav Werkzeuge — our Emmerich team will advise on suitability for specific applications and provide the ISO 17025 certificate with delivery. Technical data Article number: 110780501 GTIN: 4061905457968 Manufacturer: Microtech Metrology Core technical data Measuring range: 25–50 mm Resolution: 0.001 mm Accuracy: 0.004 mm Measuring faces: Ø20 mm Special features Digital display with 0/MODE, SET, UNIT and HOLD keys Non-rotating measuring spindle ISO 17025 calibration and certificate included FAQ Is the micrometer delivered with a calibration certificate? Yes. The micrometer from Microtech Metrology is supplied fully calibrated under ISO 17025 and includes the calibration certificate with delivery. What level of precision can be expected in routine checks? Routine external measurements achieve a resolution of 0.001 mm with an accuracy specification of ±0.004 mm, making the instrument suitable for standard precision control tasks. Which surfaces are best measured with the disc anvils? The Ø20 mm disc anvils are designed for flat or gently curved surfaces and for parts with soft coatings where distributed contact force reduces the risk of indentation. Can this instrument replace non-digital micrometers in a production line? Yes. The digital readout and quick unit/mode functions streamline reading and recording values, improving throughput and reducing manual transcription errors in production inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Micrometer With 0.001mm Resolution, Ratchet Thimble, ISO 17025 Calibrated - Microtech Metrology
Take advantage of 1 µm resolution and an included ISO 17025 calibration certificate for dependable measurement traceability; the built‑in ratchet and friction thimble ensure repeatable contact force for consistent results. Order the Micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Micrometer — 25–50 mm, 1 µm resolution, Friction Thimble The Microtech Micrometer offers high‑precision outside measurement for laboratory and workshop quality control. 1 µm resolution for precise readings Friction thimble for consistent measuring force ISO 17025 calibration certificate included Range 25–50 mm with Ø6.5 mm anvil Reliable metrology for consistent batch control High numerical precision is the main advantage: the instrument provides a 0.001 mm (1 µm) resolution and an accuracy of ±0.002 mm, which translates into measurable reductions in inspection uncertainty and fewer false rejects during production runs. The supplied ISO 17025 calibration certificate documents traceability to national standards, enabling confident acceptance of measurement results in audits and quality reports. For inspection routines, this level of reproducibility supports statistical process control and shortens release cycles. Effortless repeatability and user-centred handling Mechanical design features focus on repeatability: a friction thimble micrometer head and a ratchet stop combine to apply a uniform measuring force, reducing operator‑dependent variation. The Ø6.5 mm anvil gives a stable contact area on shafts and small bosses while limiting local deformation. As an analogue gauge, the device is robust and immediately readable without battery dependence, which benefits workshop environments where uptime and simplicity are priorities. The instrument suits fine mechanical parts, small components and precision shafts within the 25–50 mm span. Suited to workshop workflows and laboratory routines Built for both bench inspection and routine shop checks, the micrometer integrates easily into existing measurement stations and complements optical and CMM controls. Its mechanical nature ensures longevity in harsher shop floors, while the ISO 17025 calibration keeps the device aligned with laboratory accreditation needs. With a compact form and repeatable actuation, this micrometer helps reduce rework, supports quality assurance documentation and strengthens supplier confidence in measurement results. For traceable precision and expert advice on application, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to request the Microtech micrometer (SKU 110110500) and tailored consultancy Technical data Article number: 110110500 GTIN: 4061905456770 Manufacturer: Microtech Metrology Facts Measuring range: 25–50 mm Resolution: 0.001 mm (1 µm) Accuracy: ±0.002 mm Anvil diameter: Ø6.5 mm Special features Friction thimble micrometer head Ratchet stop for reproducible force ISO 17025 calibration certificate included Analogue operation, no battery required FAQ What level of accuracy can be expected from this micrometer? The Microtech micrometer achieves an accuracy of approximately ±0.002 mm and a resolution of 0.001 mm, making it suitable for high‑precision workshop and laboratory checks. Is a calibration certificate supplied with the instrument? Yes, an ISO 17025 calibration certificate is included with the Microtech micrometer (SKU 110110500), providing traceability to recognised standards. What ensures consistent measuring force with repeated measurements? The combination of a friction thimble and ratchet stop on the micrometer produces a uniform measuring force, minimising operator influence and improving repeatability. Which parts and components are best measured with this range? The 25–50 mm range and Ø6.5 mm anvil are ideal for small shafts, precision bores’ external features, bearings and machined bosses common in precision engineering. Is the device suitable for shop‑floor use? Yes; the analogue construction is robust for workshop environments and the ISO‑calibrated accuracy supports quality control processes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Micrometer With Fine-Indicator 0.001mm Resolution, Matt Chrome Frame, Supplied In Case - Metav IndustryLine
Take advantage of precise micrometry with 0.001 mm resolution and an industrial ±0.003 mm accuracy margin, combined with a robust matt chrome finish for lasting service life; order directly via Metav Werkzeuge or consult the team for application advice. Metav IndustryLine micrometer M307.209 — 25–50 mm, 0.001 mm resolution The Metav IndustryLine micrometer M307.209 is an analogue outside micrometer with a fine indicator, designed for high‑precision external measurements in workshop and inspection environments. 25–50 mm measuring range 0.001 mm resolution for fine measurement Accuracy ±0.003 mm industrial tolerance Hardened measuring faces and matt chrome finish Precise measurement that reduces rejects and rework The instrument delivers a 0.001 mm graduation and an error band of ±0.003 mm, a combination that supports tight quality control in small‑part manufacture. Such resolution allows distinguishing differences at the micrometre level, which means fewer scrap parts and a smaller margin for assembly mismatch. The analogue fine indicator gives tactile feedback and enables careful, repeatable setting of the spindle, while the stated accuracy provides a reliable statistical basis for process decisions in routine inspection tasks. Robust construction for repetitive industrial use A matt chrome‑plated frame and drum protect the body against workshop wear while keeping reflections and glare low during reading. The contact faces are hardened, reducing wear from repeated contact and preserving measurement integrity over long production runs. The spindle diameter of 6.5 mm ensures stable guidance and reduced bending under normal use; together these design choices improve reproducibility for everyday measuring tasks and extend the tool’s serviceable life with minimal maintenance. Designed for fine mechanical work and universal workshop use With a 25–50 mm measuring span this tool falls within the Mikro class for compact, high‑accuracy gauges—ideal for precision components, small bearings, shafts and intricate turned parts. The analogue format with a fine pointer suits technicians who prefer direct mechanical feedback and an uninterrupted view of the scale. In practice, the device bridges laboratory‑grade detail and shop‑floor robustness, making it a practical choice for calibration benches, toolrooms and small‑batch production where micrometre‑level control is required. For specific application guidance or to secure the Metav IndustryLine micrometer M307.209 with 0.001 mm resolution, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M307.209 GTIN: 4054469117461 Tariff number: 90173000 Manufacturer: Metav IndustryLine Core technical data Measuring range: 25–50 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Spindle diameter: 6.5 mm Analogue instrument with fine indicator Special features Frame and measuring drum matt chrome‑plated Hardened measuring faces Category: Mikro (max 10–100 mm) — compact high‑precision gauge Suited to external measurement of small mechanical components FAQ What accuracy can be expected from this micrometer? The Metav IndustryLine micrometer M307.209 delivers an accuracy of ±0.003 mm, which supports reliable dimensional control for precision manufacturing and inspection tasks. What is the smallest increment visible on the instrument? The instrument provides a 0.001 mm graduation, allowing measurements to the micrometre and enabling fine differentiation of small dimensional changes. Which measuring range does this instrument cover and how is it classified? The 25–50 mm span places the device in the Mikro category for compact, high‑precision measuring tools, suitable for fine mechanical work and small components. Are the measuring faces durable for repeated use? Yes; the contact faces are hardened to resist wear and maintain measurement integrity over extended repetitive use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Micrometer With Large Anvil 0.01mm Reading Ratchet, Delivered In Case - Metav IndustryLine
Take advantage of a precise mechanical solution that combines a 25–50 mm measuring range, 0.01 mm reading, and a ratchet stop for repeatable contact force; the robust painted frame and matt‑chrome measuring drum ensure durability in daily workshop use. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer M309.012 – 25–50 mm micrometer with large anvil, 0.01 mm reading (Metav IndustryLine) The Micrometer M309.012 is a mechanical external micrometer designed for precise thickness measurements between 25 and 50 mm, featuring a large anvil for discs and cutter edges. Range 25–50 mm for external measurements 0.01 mm vernier reading for fine resolution Large anvil for measuring cutter discs Ratchet stop and matt‑chrome measuring drum Precision measurements with clear vernier resolution This mechanical instrument delivers a 0.01 mm reading with an intrinsic accuracy of ±0.005 mm, providing reliable repeatability for routine workshop inspections. The vernier‑style scale is easy to interpret once familiar, allowing technicians and quality personnel to obtain fine results without electronics. The mechanical construction removes dependence on batteries and reduces long‑term maintenance, while the clearly graduated drum and matt‑chrome finish minimise glare for faster reading in varied lighting. Stable contact and repeatable force for consistent results Equipped with a ratchet stop, the micrometer secures a consistent measuring force, which reduces user‑induced variation when checking multiple workpieces. The large anvil increases contact area for disc‑shaped parts and cutter bodies, preventing tilting or point loading that can skew readings. A painted frame gives the body impact resistance while the matt‑chrome measuring drum resists wear; the instrument’s mass (approx. 0.9 kg) contributes to steadiness during measurement cycles, supporting reproducible outcomes across batches. Built for workshop use and protected in transit The unit is supplied in a protective case for safe transport and storage, helping to preserve the calibrated condition of the measuring faces and to avoid accidental knocks during handling. Its analog, mechanical design favours environments where robust, low‑maintenance tools are preferred and where straightforward, tactile feedback is valued. The model suits metalworking shops and tool rooms that require dependable thickness checks of cutters, sheets and similar components without the complexity of electronic systems. Contact Metav Werkzeuge today to discuss the Micrometer M309.012, confirm suitability for cutter and disc measurement applications, or arrange procurement — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.012 GTIN: 4054469117546 SKU: M309.012 Facts Measuring range: 25–50 mm Resolution / reading: 0.01 mm Stated accuracy: ±0.005 mm Weight: 0.9 kg Tariff number: 90173000 Special features Analog / mechanical instrument Large anvil (amboss 60×14 mm) Ratchet stop for consistent measuring force Frame painted; measuring drum matt‑chrome finish Supplied in protective case (plastic or wooden) FAQ What measurement range does this micrometer cover? The micrometer covers an external measuring range of 25–50 mm, suitable for small to medium external dimensions. How fine is the reading and what accuracy can be expected? The instrument provides a 0.01 mm vernier reading with a stated accuracy of ±0.005 mm, delivering workshop‑grade precision for routine checks. Is the micrometer suitable for measuring cutter discs and similar parts? Yes, the large anvil and ratchet stop make the tool especially appropriate for measuring discs, cutter thicknesses and other short, flat workpieces. Does the micrometer include a protective case? The micrometer is supplied in a protective case to safeguard the instrument during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Micrometer With Microcomputer For Thread Measurement, Wireless/USB, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of 0.003 mm accuracy, Wireless + USB data transfer and an ISO 17025 calibration certificate for dependable thread and external measurements; order the micrometer directly via Metav Werkzeuge or ask the consultants for tailored advice. Micrometer — Digital micrometer 25–50 mm with 2.4" colour touchscreen (Microtech Metrology) The Micrometer is a compact digital measuring instrument for precise metric measurements, offering wireless and USB data export for efficient documentation in workshop and inspection environments. Accuracy 0.003 mm Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibrated with certificate Traceable precision for inspection and production The digital micrometer delivers measurable gains in quality control by combining a high accuracy of 0.003 mm with a fine reading resolution of 0.0001 mm. Supplied fully calibrated to ISO 17025, the instrument includes a calibration certificate, which supports traceability and audit requirements. For technicians and quality engineers this means fewer measurement disputes and simplified acceptance testing. The instrument’s metric measuring range of 25–50 mm is ideal for routine external diameter and thread measurements on small components, while the solid measurement principle ensures repeatable results across production batches. Faster data capture, fewer transcription errors Equipped with a 2.4" colour touchscreen, the device offers an intuitive display that reduces reading errors and accelerates operator training. Wireless and USB outputs allow direct transfer of measured values into inspection software or spreadsheets, cutting manual entry time and ensuring documentation integrity. For production lines and inspection benches, the seamless data flow supports statistical process control and shortens throughput times — a practical efficiency argument for purchasing decisions where measurement data must be archived or analysed. Robust design and practical tooling for everyday use A non-rotating spindle reduces the risk of damaging delicate threads, improving part throughput when measuring precision fasteners and turned components. The package includes 6 anvils 0.4–7 mm (Metric 60), extending the micrometer’s versatility for different thread profiles and small external dimensions. Built for workshop and laboratory environments, the instrument’s digital architecture helps integrate conventional hand measurement with modern data handling. The combination of solid mechanical design and digital connectivity makes this micrometer suitable for inspection rooms as well as on-the-bench quality checks. Contact Metav Werkzeuge for a detailed specification review or to arrange a delivery from Emmerich; our experts at Metav Werkzeuge can advise on integration, accessories and calibration traceability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 110710508 GTIN: 4061905456893 Manufacturer: Microtech Metrology Data output: Wireless + USB Display: Colour 2.4" Touchscreen Calibration: ISO 17025 certificate included Facts Measuring range: 25–50 mm Resolution / reading: 0.0001 mm Accuracy: 0.003 mm Display size: 2.4 inches Special features Digital micrometer, Metric 60 type Non-rotating spindle Accessories: 6 anvils 0.4–7 mm (Metric 60) Wireless and USB data transfer Colour touchscreen interface Delivered calibrated to ISO 17025 FAQ What level of accuracy does the micrometer provide? The micrometer from Microtech Metrology achieves an accuracy of 0.003 mm with a reading resolution of 0.0001 mm and is supplied with an ISO 17025 calibration certificate. Is this device suitable for measuring threads and small external diameters? Yes, the digital micrometer is configured for metric measurements and includes six anvils (0.4–7 mm, Metric 60), making it suitable for threads and small external diameters. How can measurement data be exported for documentation? Measurement values are exported via Wireless or USB connections; the device’s digital output simplifies transfer to inspection software or spreadsheets. Does the spindle rotation affect delicate surfaces? The non-rotating spindle design protects thread flanks and delicate surfaces during measurement, reducing handling-related damage. What is included in the delivery package? Delivery contains the micrometer (Article number 110710508), six anvils 0.4–7 mm (Metric 60) and an ISO 17025 calibration certificate. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Micrometer With Point Contacts, Colour Touchscreen, Wireless/USB, IP65, ISO 17025 Cal Cert - Microtech Metrology
Benefit from a micrometer that combines Industry 4.0 connectivity, factory-grade ISO 17025 calibration and a rugged CNC‑machined aluminium housing to secure reproducible results and streamlined data handling. Order the instrument directly via Metav Werkzeuge or consult our specialists for workflow integration. Microtech Metrology digital micrometer 25–50 mm — ISO 17025, Wireless + USB The Microtech Metrology digital micrometer (25–50 mm) is a high‑precision measuring instrument designed for both workshop use and laboratory traceability, offering advanced data transfer and factory calibration for reliable quality control. Industry 4.0-ready with DataMet POINT system ISO 17025 calibration certificate included Wireless and USB data output options CNC aluminium housing, IP65 protection Seamless data flow for modern measurement processes The instrument integrates an Industry‑grade DataMet POINT / MICS system that supports wireless synchronisation with the MDS app (Windows, Android, iOS, macOS), Wireless HID and USB HID transfer modes. This connectivity reduces manual transcription, enables immediate statistical evaluation and simplifies SPC integration. The built‑in memory for 2,000 values and folder system allow on‑device organisation before transfer, while optional Modbus RTU (RS‑485) provides a wired path for PLC or MES link‑ups. Traceable precision backed by accredited calibration Delivered with an ISO 17025 calibration certificate (Ilac MRA), the micrometer meets laboratory traceability requirements for quality documentation. The instrument’s stated accuracy of 0.003 mm and its digital measurement chain make it suitable where tight tolerances are required. The colour 2.4‑inch touchscreen provides clear readouts and guided menus, helping to interpret readings and reduce operator error during routine checks or incoming inspection. Robust design for shop‑floor reliability A CNC‑machined aluminium housing combined with IP65 protection ensures resistance to coolant splash and workshop dust, extending instrument service life in demanding environments. The micrometer features a ratchet stop for consistent measuring force and a rotating spindle for smooth engagement; pointed measuring faces are useful for small contact areas and specialised features. These design details contribute to repeatable measurements and lower rework rates in production. Practical handling and versatile measurement modes Beyond simple dimension capture, the device supports probe mode, 2D graphing and linear/temperature compensation functions for advanced inspection tasks. The combination of tactile ratchet control, a responsive touchscreen and Industry‑standard data outputs provides both precision and efficiency in routine measurement cycles. The unit is therefore suited for calibration laboratories, inspection benches and production quality control where data traceability and automated logging are priorities. Speak to Metav Werkzeuge to specify the Microtech Metrology digital micrometer for Industry 4.0 workflows and to arrange delivery with the ISO 17025 calibration certificate; our team in Emmerich will advise on integration and logistics. Technical data Article number: 110450508 GTIN: 4061905040818 Manufacturer: Microtech Metrology Numeric data Measuring range: 25–50 mm Accuracy: ±0.003 mm Memory capacity: 2,000 values Display: 2.4" colour touchscreen Materials & features Housing: CNC machined aluminium Protection class: IP65 Measuring faces: pointed Ratchet stop and rotating spindle Data output: Wireless, USB HID; optional Modbus RTU (RS‑485) Calibration: ISO 17025 certificate included (Ilac MRA) Industry 4.0 DataMet POINT / MICS system; probe and 2D modes FAQ Is the micrometer supplied with a calibration certificate? Yes. The micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), confirming laboratory traceability and documented measurement uncertainty. Which data transfer options are available for automated logging? Wireless transfer to the MDS app, Wireless HID, Wireless HID+MAC and USB HID are supported; an optional Modbus RTU (RS‑485) interface is available for industrial connections. What is the stated accuracy and suitable applications? The instrument specifies an accuracy of ±0.003 mm, making it suitable for precision inspection, calibration tasks and production quality control where tight tolerances are required. How does the design cope with shop‑floor conditions? A CNC aluminium housing and IP65 rating protect electronics from dust and coolant; the ratchet stop and rotating spindle support consistent measuring force and long‑term repeatability. How many readings can be stored before transfer? The internal memory stores up to 2,000 values with a folder system and basic statistics functions for on‑device review. Manufacturer: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Micrometer With Ratchet Thimble 0.01mm Resolution, Painted Frame, DIN 863, Plastic Case - Metav IndustryLine
Compact, reliable and built to the DIN standard, the micrometer combines a 0.01 mm reading with a ratchet stop and a robust powder‑coated frame for consistent external measurements; order the instrument directly via Metav Werkzeuge or ask our consultants if additional technical data is required. M304.409 Outside Micrometer – 25–50 mm range, 0.01 mm resolution (Metav IndustryLine) The M304.409 is an analogue outside micrometer designed for precise external measurements of small components in workshops and toolrooms. Ratchet stop for consistent measuring force 0.01 mm resolution on a thimble scale Powder‑coated frame with matt‑chrome measuring drum Conforms to DIN 863 standard Accurate, repeatable readings for routine quality checks The analogue thimble provides a 0.01 mm graduation that supports fine, repeatable readings for everyday measurement tasks. The integrated ratchet stop prevents over‑tightening and reduces variation caused by manual force, which improves reproducibility when checking batches or setting up fixtures. Conformity to DIN 863 gives a reliable reference point for production and inspection routines and simplifies the documentation of process capability and traceable checks. Durable construction that eases handling in the workshop A powder‑coated frame reduces surface wear and improves visibility in busy environments, while the matt‑chrome measuring drum resists glare for clearer scale reading. The spindle runs on a 0.5 mm pitch, with the spindle pitch 0.5 mm translating each full rotation of the thimble into a precise axial movement; this mechanical design yields predictable feel and fine control when approaching the nominal dimension. The solid finish of the measuring faces and drum supports stable contact and straightforward cleaning. Ideal size class for fine mechanical and general engineering tasks With a measuring span of 25–50 mm, this instrument sits in the compact range that balances reach and rigidity for small to medium components. This size class is well suited to precision metalwork, component assembly, and toolmaking where space is limited but accurate external measurement is essential. The tool’s proportions make single‑hand operation practical while retaining the stiffness required to avoid deformation on short workpieces. Simple operation and straightforward upkeep Reading the scale requires no electronics, which removes reliance on batteries and simplifies maintenance for busy shops. The ratchet mechanism not only standardises contact force but also signals when adequate measuring pressure has been reached, reducing operator error in repetitive checks. Routine care—cleaning the faces after use and storing the instrument protected from dust and impact—preserves accuracy and extends service life, supporting a dependable metrology routine on the shop floor. Contact Metav Werkzeuge GmbH in Emmerich for technical advice and procurement of the Metav IndustryLine M304.409 micrometer Technical Data Article number: M304.409 GTIN: 4054469116884 Type: Analogue outside micrometer Standard: DIN 863 eClass: 21170328 ETIM: EC003590 Facts Measuring range: 25–50 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Zolltarifnummer: 90173000 Ratchet stop: yes Special features Frame: powder‑coated blue Measuring drum: matt‑chrome finish Analog readout (thimble) Category: Messschrauben (outside micrometer) FAQ What measurement range does the micrometer cover? The M304.409 covers a measuring span of 25–50 mm, suited to compact and precise external measurements. What is the resolution of the instrument? The thimble scale provides a resolution of 0.01 mm for fine, repeatable readings. How does the ratchet stop improve measurement quality? The ratchet stop on the M304.409 standardises the contact force at the spindle‑workpiece interface, reducing operator‑induced variation and improving repeatability. Is the micrometer compliant with recognised standards? Yes, the instrument is manufactured to comply with DIN 863, providing a clear benchmark for workshop inspection procedures. What materials and finishes are used on the micrometer? The frame is powder‑coated blue for durability and visibility, and the measuring drum is finished in matt chrome to reduce glare and aid clear reading. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Micrometer with Ratchet, Matt Chrome Thimble, Painted Frame, Supplied in Case - Metav IndustryLine
Robust painted frame and a matt‑chromed measuring thimble combine with a ratchet stop and 0.01 mm graduation to deliver repeatable, workshop‑grade measurements in the 25–50 mm range. Order the M304.609 micrometer directly via Metav Werkzeuge or ask our consultants if needed. M304.609 micrometer screw gauge — ratchet, matt‑chromed thimble M304.609 is a compact, analogue micrometer screw gauge designed for precise external measurements in fine mechanical and workshop environments Ratchet stop for consistent measuring force Matt‑chromed thimble for clear scale reading 25–50 mm range for fine mechanical work Reliable construction for consistent readings The instrument features a painted frame and a matt‑chromed measuring thimble, chosen to reduce glare and wear over repeated use. The mechanical design follows DIN 863, providing a familiar standard for quality and interchangeability in industrial environments. With an analogue graduation of 0.01 mm, the screw gauge gives a clear, decimal‑based reading that is easy to interpret on the thimble. The result is a tool that supports routine shop floor inspection and set‑up tasks with predictable performance. Controlled feed and fine adjustment for delicate parts A 0.5 mm spindle pitch and a spindle diameter of 6.5 mm ensure steady axial movement and low play during adjustment. The integrated ratchet stop prevents over‑tightening and standardises the contact pressure, which reduces user‑introduced variance when measuring small components. For tasks where repeatability matters, the mechanical interplay of pitch, thimble graduation and ratchet yields reliable single‑turn increments and accurate hundredths‑of‑a‑millimetre readings. Compact range tailored to precision components The 25–50 mm measuring span places this gauge in the compact class for detailed mechanical work: ideal for small shafts, bearing journals and components in precision assemblies. Built to serve routine workshop inspection and quality control, the instrument balances reach and stiffness, making one‑handed operation straightforward without sacrificing measurement stability. The device is part of the Metav IndustryLine offering, which emphasises consistent manufacturing checks and dependable delivery for professional users. Choose the Metav IndustryLine M304.609 micrometer for dependable, repeatable external measurements and contact Metav Werkzeuge in Emmerich for purchasing or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M304.609 GTIN: 4054469117140 Category: Micrometer screw gauges (Messschrauben) Standard: DIN 863 Facts Measuring range: 25–50 mm Resolution / graduation: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm TARIC / customs code: 90173000 Special features Frame painted and measuring thimble matt‑chromed Ratchet stop for consistent measuring force Analogue operation ECLASS: 21170328 FAQ What level of reading resolution does this micrometer provide? The M304.609 offers a 0.01 mm analogue graduation, enabling decimal‑based readings suitable for standard workshop inspection and set‑up tasks. How does the ratchet stop improve measurement results? The ratchet stop on the M304.609 standardises contact pressure at the measuring faces, reducing variation caused by manual tightening and improving repeatability for series checks. Is this instrument suitable for precision components under 50 mm? Yes, the 25–50 mm range is tailored to compact parts such as small shafts and bearing journals, providing a good balance between reach and stiffness for precision work. Which standard does the micrometer comply with? The device is manufactured to DIN 863, ensuring compatibility with common industry requirements for micrometer screw gauges. What materials are used in the construction of the micrometer? The frame is painted for corrosion protection and the measuring thimble is matt‑chromed, offering improved durability and reduced reflection when reading the scale. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com