Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25-30mm Three-Point Internal Micrometer Digital With Measuring Drum Scale, IP65 - Metav IndustryLine
Benefit from a combination of high precision, robust protection and ready-to-use accessories for reliable internal measurements in fine mechanical work; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M312.236.M — Digital three-point internal micrometre, 25–30 mm, Metav IndustryLine The M312.236.M is a digital three-point internal micrometre designed for precise measurement of blind and through bores in fine mechanical workshops and quality control environments Digital display with ABS/INC/UNIT functions High-resolution 0.005 mm reading accuracy IP65 dust- and splash-resistant Delivered with setting ring and extension Precision where small tolerances matter The three-point measuring principle ensures stable, concentric contact with the bore, reducing alignment errors common with two-point probes; coupled with a reading of 0.005 mm, measurements reach a fine resolution that suits high-precision workshop tasks. The instrument’s display and control set (ON/OFF/SET and ABS/INC/UNIT) simplify reading and mode selection, while the measuring drum with scaling provides a secondary, analogue reference. These features support faster inspection cycles and minimise uncertainty in comparison to manual gauges without electronic readout. Robust construction for everyday shop use Constructed to the requirements of DIN 863, the device combines a matt‑chrome plated scale and vernier with hardened measuring faces, delivering wear resistance and long-term stability. The unit’s IP65 rating protects the electronics from dust and water jets, making it suitable for industrial environments where coolant mist or dust are present. The compact form factor, classified in the micro measuring class (max. range up to 100 mm), gives good rigidity for its size and aids repeatable handling during routine inspections. Ready for blind-hole bores and extended reach Designed specifically for internal bores, the tool is suitable for blind‑hole bores and is supplied with a setting ring and an extension (150 x Ø16) to access recessed features. The three-point anvils combine with the extension to ensure consistent contact even in difficult-to-reach geometries, reducing the need for improvised fixturing. The available data output format (RB 4.1) enables integration into measurement documentation routines or simple data collection workflows without modifying the mechanical measuring principle. Practical benefits for quality control workflows Weighing 1.3 kg and with a compact length of 90 mm, the instrument balances stability and portability for bench and shop floor use. The digital readout accelerates decision-making in inspection steps, while the analogue drum scale remains useful for cross-checking. Supplied complete in a transport case with accessories, the micrometre is ready for immediate use on the production line or in the inspection room, reducing setup time and supporting consistent measurement practice. Contact Metav Werkzeuge for tailored advice or to arrange purchase of the Metav IndustryLine M312.236.M with its 0.005 mm precision — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M312.236.M GTIN: 4054469162379 Manufacturer: Metav IndustryLine Standard: DIN 863 Data output: RB 4.1 Facts Measuring range: 25–30 mm Resolution / accuracy: 0.005 mm Weight: 1.3 kg Length: 90 mm Protection class: IP65 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT Measuring drum with scaling Hardened measuring faces Delivered with setting ring and extension (150 x Ø16) Suitable for blind‑hole bores Scale and vernier matt‑chrome plated Supplied in transport case FAQ What measuring range does this instrument cover? The micrometre covers a measuring range of 25–30 mm and is classified in the micro measuring class for compact, high‑precision internal gauging. Is the instrument suitable for blind‑hole bores? Yes, the tool is suitable for blind‑hole bores; the three‑point design and included extension facilitate reliable contact in recessed features. What resolution and accuracy can be expected? The readout and accuracy are specified as 0.005 mm, providing fine resolution for demanding inspection tasks. Can measurement data be exported electronically? Yes, the device offers data output in the RB 4.1 format for straightforward transfer into documentation workflows. Which accessories are included? Delivery includes a setting ring and an extension (150 x Ø16), and the instrument is supplied in a transport case for safe handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-30mm Three-Point Internal Micrometer Digital, Carbide Measuring Faces, RB6, No Setting Ring - Metav IndustryLine
The combination of a 25–30 mm measuring range, tungsten carbide measuring faces and a precise 0.005 mm accuracy creates a compact, robust solution for internal measurements in restricted bores; order the instrument directly via Metav Werkzeuge or consult the team for application guidance. M312.216 — Digital three-point inside micrometer, 25–30 mm, HM measuring faces (Metav IndustryLine) The M312.216 is a digital three-point inside micrometer designed for accurate measurement of small blind bores and internal diameters in precision engineering and workshop environments. Digital display with mm/inch and hold Three-point inside measurement for stable contact Carbide measuring faces (HM) for wear resistance High accuracy 0.005 mm for reliable checks Precision where blind holes matter The three-point arrangement delivers a centring action that stabilises the contact points in narrow bores, ensuring repeatable results even in short or blind-hole situations. With a measuring range of 25–30 mm and a stated accuracy of 0.005 mm, this device is tailored for fine internal checks where dimensional certainty is required. The digital readout, featuring ON/OFF/SET, HOLD and mm/inch functions, reduces interpretation errors and accelerates inspection routines; the clear display simplifies the transition from manual vernier techniques to rapid electronic readings without sacrificing the control expected in precision measurement. Engineered for dependable readings and efficient workflows A combination of three-point geometry and HM (tungsten carbide) measuring faces lowers wear and maintains contact integrity across repeated use, which is particularly beneficial where frequent checks of small bores are part of a production process. The instrument’s reading resolution of 0.001 mm supports fine discrimination, while the solid construction and balanced mass contribute to stable handling; the item weighs approximately 1.3 kg, offering a reassuring feel without being unwieldy. For workshops requiring traceable results, the micrometer integrates into existing test procedures and is suitable for routine quality-control tasks in precision engineering and toolmaking. Durability and practical handling in the workshop Built with workshop practice in mind, the micrometer omits decorative extras in favour of functional durability: the measuring faces resist abrasive wear, and the three-point clamping effect reduces tilting, which is a common source of measurement error in small bores. The instrument is supplied without a setting ring or extensions, making it compact for storage and immediate use where blind-hole measurements are frequent. The robust digital electronics with straightforward control keys help maintain consistent throughput during repetitive inspections, while the physical design supports quick placement in the bore and confident take-up of the measurement force for reproducible outcomes. Contact Metav Werkzeuge today for tailored advice on integrating the M312.216 into existing quality procedures or to arrange direct supply from our Emmerich facility Technical data Article number: M312.216 GTIN: 4054469169132 Customs tariff number: 90173000 eCl@ss: 21170335 ETIM: EC003590 Facts Measuring range: 25–30 mm Maximum measuring range: 30 mm Minimum measuring range: 25 mm Reading (resolution): 0.001 mm Accuracy: 0.005 mm Weight: 1.3 kg Data output: RB 6 Digital: yes Special features Measuring faces: tungsten carbide (HM) Display functions: ON/OFF/SET, HOLD, mm/inch Design: three-point inside measuring instrument Delivered without setting ring No extension supplied Suitable for blind-hole (sackloch) bores FAQ How is repeatability ensured for blind-hole measurements? The three-point centring principle of the M312.216 provides stable contact in blind bores, which improves repeatability by reducing tilt and uneven contact during measurement. Can the digital readings be switched between units? Yes, the instrument’s digital display includes a mm/inch function enabling quick unit changes directly on the device. Is the instrument suitable for frequent workshop use? The M312.216’s carbide measuring faces and robust construction are designed for regular use in precision workshop settings where wear resistance and repeatable results are required. What data output does the micrometer provide for SPC or documentation? This model is specified with an RB 6 data output; refer to the technical data for integration options into documentation workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-30mm Three-Point Internal Micrometer Pistol Grip, Colour 1.54" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from the combination of handheld ergonomics, wireless data transfer and sub‑0.003 mm measurement accuracy for dependable internal diameter inspection; the instrument is delivered fully calibrated to ISO 17025 with a calibration certificate. Order the three‑point internal micrometre directly via Metav Werkzeuge or ask our consultants if needed. Three‑point internal micrometre — Pistol grip, colour touchscreen (Microtech Metrology) The three‑point internal micrometre combines a pistol grip and integrated microcomputer to perform fast, repeatable internal diameter measurements in inspection benches and workshop environments. High precision ±0.003 mm accuracy Colour 1.54" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Traceable precision for inspection and quality control This instrument delivers ±0.003 mm reproducibility with a 0.0001 mm readout, providing the kind of measurement certainty required for routine quality control and first‑article inspection. The integrated microcomputer stabilises measurement sequencing and, because the tool is supplied with an ISO 17025 calibration and a calibration certificate, results are traceable to recognised standards. These features reduce rework and inspection uncertainty by documenting the instrument’s performance and ensuring legal and audit readiness. Faster measurement workflows with ergonomic handling Ergonomics and connectivity are combined to speed repetitive tasks: the pistol grip reduces operator fatigue and steadying errors, while the colour 1.54" touchscreen simplifies setup and reading. Measurement data can be exported via wireless or USB interfaces, enabling direct capture into inspection software or spreadsheets and cutting manual transcription. The included setting ring allows quick zeroing against a reference, and two measuring depths (91 mm and 150 mm) extend practical reach for varied bore geometries without compromising handling. Compact range tailored to fine mechanical work With a measurement span of 25–30 mm, this instrument sits in the micro category for compact, high‑precision internal gauges: ideal for watchmaking, small bearing bores and precision components where short jaws retain stiffness and repeatability. The three‑point contact geometry ensures concentric seating and stable diameter measurement even on slightly oval bores. Combined with the device’s handheld form factor and integrated electronics, this makes the micrometre a practical choice where tight tolerances and fast throughput are required, supported by Metav’s quality‑filter approach from Emmerich that keeps precise tools accessible for workshops and labs. For application advice or to request the ISO 17025‑calibrated Microtech Metrology three‑point internal micrometre, contact Metav Werkzeuge — our specialists will confirm suitability for the task and arrange delivery Technical data SKU: 135303010 GTIN: 4061905041808 Manufacturer: Microtech Metrology Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Core specifications Measurement range: 25–30 mm Resolution: 0.0001 mm Accuracy: ±0.003 mm Measuring depths: 91 mm / 150 mm Readout unit: mm Special features Pistol grip Integrated microcomputer Setting ring included ISO 17025 calibration with certificate Wireless and USB interfaces FAQ Is the instrument delivered calibrated and ready for inspection? Yes. The Microtech Metrology three‑point internal micrometre (SKU 135303010) is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceable documentation. Which data interfaces are available for integration with inspection software? Data output is provided via wireless and USB, allowing the micrometre to transfer measurements to PCs and inspection systems without manual entry. What is the measuring range and for which applications is it intended? The device measures from 25 to 30 mm and is classified as a micro‑range instrument, suitable for fine mechanical tasks such as watchmaking, small bearing bores and precision component inspection. How precise is the readout during routine measurements? The instrument offers a display resolution of 0.0001 mm and a stated accuracy of ±0.003 mm, combining fine resolution with reliable reproducibility for workshop and lab use. What is included in the delivery package? Delivery includes the three‑point internal micrometre with pistol grip, the setting ring for zeroing, the integrated microcomputer and the ISO 17025 calibration certificate Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-30mm Three-Point Internal Micrometer Self-Centering, 0.004mm Accuracy, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise 0.004 mm accuracy, a self‑centring three‑point measuring head and carbide measuring faces for consistent blind‑hole measurement; order directly via Metav Werkzeuge or contact the consultancy team for tailored advice. MS908.656 Three‑Point Internal Micrometer — Self‑centring, 25–30 mm range (Metav IndustryLine) A three‑point internal micrometer designed for accurate measurement of blind holes and restricted bores in the 25–30 mm range, combining a compact form with stable contact geometry. Three‑point self‑centring measuring head Measuring range 25–30 mm Carbide measuring faces for wear resistance Analogue drive with 0.005 mm resolution Consistent results for blind‑hole inspection The instrument's self‑centring three‑point system guarantees repeatable contact with bore surfaces, reducing setup variance and rework in production inspection. The compact contact geometry suits restricted bores where standard callipers cannot reach, while the analogue drive and fine spindle allow controlled approach to the measuring surfaces. This configuration translates directly into fewer rejected parts and more reliable pass/fail decisions on the shop floor. Precision that meets workshop demands With a documented accuracy of 0.004 mm and a readable resolution of 0.005 mm, the device sits between general workshop tools and high‑precision instruments. The mechanical design and robust spindle ensure stable readings even in routine quality control. For applications that require exact internal diameters in small assemblies, this micrometer provides a balance of sensitivity and practical handling without invoking complex electronic systems. Durable contact surfaces for long service life The measuring faces are made from carbide, offering superior wear resistance under frequent use and abrasive conditions. That hard contact material preserves the reference geometry over many cycles and keeps measurement uncertainty low. An adjustment ring marked 25 assists with quick reference when setting or checking the nominal diameter, making repetitive tasks more efficient and less error‑prone. Compact format for fine mechanical work Classified in the micro range by its 25–30 mm span, the tool is ideal where small, precise components are involved. The short overall length supports handling in confined environments and maintains torsional stiffness for reliable contact pressure. As an analogue internal measuring instrument, it offers familiar operation for technicians while delivering the benefits of a three‑point system designed specifically for blind‑hole measurement. For precise and repeatable blind‑hole measurement, contact Metav Werkzeuge to request the Metav IndustryLine three‑point internal micrometer MS908.656 or to speak with a specialist at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: MS908.656 Name: Three‑point internal micrometer Manufacturer: Metav IndustryLine Facts Measuring range: 25–30 mm Resolution: 0.005 mm Accuracy: 0.004 mm Length: 90 mm Special features Self‑centring three‑point measuring head Carbide measuring faces Analogue micrometer design Adjustment ring marked 25 Suitable for blind‑hole measurement FAQ What measuring range does this instrument cover? The three‑point internal micrometer MS908.656 covers a measuring range of 25–30 mm, suited to small‑bore and blind‑hole applications. Is this micrometer suitable for blind‑hole measurement? Yes, the self‑centring three‑point system of the Metav IndustryLine three‑point internal micrometer is specifically designed to measure blind holes and restricted bores reliably. What accuracy and resolution can be expected? The instrument provides an accuracy of 0.004 mm with an analogue readable resolution of 0.005 mm, offering precise control for workshop inspections. Are the measuring faces durable for repeated use? The measuring faces are made of carbide, ensuring wear resistance and long‑term stability of the contact geometry under frequent measurement cycles. How is the instrument adjusted for repetitive tasks? An adjustment ring marked 25 is provided for quick reference and repeatable setting when working with the same nominal diameters. Is this a digital instrument? No, the MS908.656 is an analogue internal micrometer, combining mechanical reliability with a fine spindle for controlled readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-30mm Three-Point Internal Micrometer Self-Centering, 0.005mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the high repeatability of the self‑centring three‑point design, the fine 0.005 mm accuracy, and the protected transport case for reliable bore inspection; order the three‑point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three‑point internal micrometer M836.710 — Self‑centring, 25–30 mm range (Metav IndustryLine) Three‑point internal micrometer M836.710 is an analogue instrument for precise internal diameter measurement, designed for fine bore inspection in workshops and quality labs. Self‑centring three‑point measuring head Resolution 0.005 mm for fine bore checking Hardened measuring faces for wear resistance Supplied in protective transport case Optimised precision where bore accuracy matters The three‑point measuring concept guarantees centred contact with the bore, delivering consistent repeatability even on short measuring depths. With a 0.005 mm stated accuracy the instrument is suited for demanding inspection tasks where small deviations matter; the fine graduation and analogue scale allow immediate assessment without electronic dependencies. The 25–30 mm range is tailored to compact internal diameters commonly found in precision components, making this tool a specialist solution for tight bores. Durable construction for continuous workshop use A combination of a self‑centring measuring head and hardened measuring faces reduces wear and secures long service life under frequent use. The mechanical design minimises deformation during handling, so results remain reproducible across repetitive checks. The robust build and simple mechanical parts lower maintenance needs and avoid calibration drift typical of more delicate instruments, supporting efficient in‑process control in production environments. Practical handling and measurement workflow benefits The analogue format keeps operation straightforward: rapid set‑up, clear tactile feedback and no requirement for batteries. The three‑point system centres automatically, which shortens cycle times for routine inspection and reduces operator‑induced variance. Supplied in a protective case, the instrument arrives ready for safe transport and storage, protecting the measuring faces and preserving accuracy between uses. Professional backing and supply reliability As part of the Metav IndustryLine range, this micrometer combines focused functionality with supply chain transparency. The instrument is categorised for micro‑range measurements and fits workshop and small‑batch laboratory environments where high precision and repeatability are required. The combination of technical performance and Metav’s logistics ensures predictable availability and traceable sourcing for production planning. Contact Metav Werkzeuge for a tailored quotation or technical clarification and secure fast delivery from our Emmerich depot. Technical data Article number: M836.710 GTIN: 4061905041440 eCl@ss: 21170335 ETIM: EC003590 Facts Measurement range: 25–30 mm Accuracy / resolution: 0.005 mm Analog instrument Category: Micrometers / Internal micrometer Special features Three‑point measuring head, self‑centring Hardened measuring faces Supplied in transport case Suitable for fine bore inspection FAQ Is the instrument calibrated on delivery? The three‑point internal micrometer M836.710 is supplied ready for use; any calibration scope is indicated with the specific product documentation. What measurement range and accuracy does the micrometer cover? This internal micrometer covers a 25–30 mm range with an accuracy of 0.005 mm, making it suitable for precision internal diameter checks. Are the measuring faces durable for workshop use? Yes — the M836.710 features hardened measuring faces designed to resist wear under typical workshop inspection routines. Can the micrometer be used without electronic components? The analogue design of the Metav IndustryLine M836.710 provides direct, battery‑free operation for immediate readings and simple maintenance. What is the benefit of the three‑point design? The three‑point, self‑centring system ensures centred contact with the bore, improving repeatability and reducing operator‑related measurement variation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-30mm Three-Point Internal Micrometer With Setting Ring And Extension, Calibrated In Case - Metav IndustryLine
Choose a reliable combination of three‑point centring, ±0.005 mm accuracy and a matt‑chrome vernier for consistent blind‑hole inspection; the robust construction supports reproducible measurements and reduces rework. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer M312.136.P — three‑point centring, 25–30 mm range Three‑point internal micrometer M312.136.P is an analogue measuring instrument designed for precise inspection of blind holes and small bores in production and toolmaking environments. Measuring range 25–30 mm Accuracy ±0.005 mm Includes setting ring and extension Accurate blind‑hole inspection with three‑point centring The three‑point design centres reliably inside bores, providing a stable contact geometry that minimises eccentricity and user error. With an accuracy of 0.005 mm and an analogue vernier, the instrument is suited to quality control tasks where fine tolerances matter. The hardened measuring faces (contact surfaces) give wear resistance, so repeat measurements remain consistent even after frequent use. This combination of centring geometry and hardened contacts reduces measurement scatter and supports faster acceptance decisions on the shop floor. Clear reading and robust scale for workshop use A matt‑chrome scale and vernier ensure good contrast under workshop lighting while resisting glare. The instrument’s analogue readout with a 0.005 mm indication value is straightforward to interpret and reduces downtime compared with more complex setups. A compact overall length and a middle‑weight construction balance handling and stability: the micrometer’s design reduces vibration sensitivity during short‑reach checks and eases one‑person operation for routine inspections. Accessories that extend capability and simplify setup Delivery includes a setting ring (25) and an extension (150 × Ø16.7), enabling quick calibration of the measuring head and access to deeper blind holes without altering the instrument’s measuring principle. The included accessories allow the device to be adapted to variant bore depths while maintaining the same reference geometry. For batch checks, the extension combination reduces the need for fixture changes, improving throughput and lowering per‑part inspection time. Where this instrument delivers value in production Engineered for blind‑hole and internal bore verification, the micrometer is ideal for toolmaking, small series production and maintenance work where bore concentricity and diameter tolerance are critical. The three‑point contact reduces the influence of off‑axis positioning and the fine accuracy helps to catch deviations early, avoiding costly rework. Integration into a flow of regular spot checks supports reliable process control and documentation of conformity. Consider the Metav IndustryLine three‑point internal micrometer for precise blind‑hole measurement and ask Metav Werkzeuge for tailored advice or application examples. Technical data Article number: M312.136.P GTIN: 4054469158655 Manufacturer: Metav IndustryLine SKU: M312.136.P Key figures Measuring range: 25–30 mm Accuracy: 0.005 mm Reading value: 0.005 mm Length: 80 mm Weight: 1.2 kg Features Three‑point measuring head Suitable for blind‑hole measurement Scale and vernier matt chrome‑plated Includes setting ring (25) Extension 150 × Ø16.7 Hardened measuring faces Analogue instrument FAQ What is the main advantage of the three‑point design? The three‑point geometry centres automatically in the bore and reduces eccentricity; the three‑point internal micrometer offers more stable contact and improved repeatability compared with two‑point probes. Which blind‑hole depths can be measured with the supplied extension? The instrument is supplied with an extension (150 × Ø16.7) that increases reach for deeper blind‑hole checks; further extension options may be discussed with Metav Werkzeuge for specialised depths. How fine is the resolution and how does that relate to accuracy? The analogue readout provides a reading value of 0.005 mm and the device is specified with an accuracy of 0.005 mm, giving close agreement between displayed value and true dimension for routine inspection tasks. Are the measuring faces wear‑resistant for serial inspections? Yes, the measuring faces are hardened to resist wear; this preserves the reference surfaces and supports reproducible results over extended use with the three‑point internal micrometer. Which accessories are included with the M312.136.P? Delivery of M312.136.P includes a setting ring (25) and an extension (150 × Ø16.7) for calibration and extended reach during blind‑hole measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-45mm Five-Point Outside Micrometer 0.01mm Graduation Carbide Faces, Ratchet Stop, Case - Metav IndustryLine
Precise carbide measuring faces, a ratchet stop and ±0.005 mm accuracy deliver reliable repeatability for five-point external checks in the 25–45 mm band; the robust enamelled frame and matt‑chrome drum ensure long service life in workshop conditions. Order the instrument directly via Metav Werkzeuge or consult the Metav advisors for application support. M309.032 – 5‑point outside micrometer, 25–45 mm, 0.01 mm reading (Metav IndustryLine) M309.032 is a dedicated outside micrometer designed for five‑point external measurement of three‑ and five‑sided components in production and inspection Carbide measuring faces for wear resistance Ratchet stop for consistent measuring force Precision ±0.005 mm, 0.01 mm reading High repeatability for production and inspection The mechanical design delivers repeatable results where process stability matters most. With a reading of 0.01 mm on the thimble and an indicated accuracy of ±0.005 mm, this measuring instrument is tailored to applications that demand reliable tolerances rather than ultra‑fine laboratory resolution. The integrated ratchet stop limits operator variation by applying a constant measuring force, which reduces measurement scatter and speeds up routine control tasks on series parts. Durable construction reduces downtime A powder‑coated, enamelled frame combined with a matt‑chrome measuring drum provides resistance against the knocks and oils common in workshop environments. The carbide measuring faces protect the contact surfaces from premature wear when measuring harder materials, extending service intervals and preserving the instrument’s datum accuracy. The compact mechanical layout keeps maintenance straightforward and supports a long service life under regular workshop use. Built for prismatic and five‑sided components The instrument is intended for five‑point external measurement of three‑ and five‑sided workpieces, making it suitable for profile and fastener inspection as well as many turned and milled parts. The 25–45 mm range covers an important segment of production parts and complements standard gauge sets, while the 25 mm setting size supports quick switching between nominal sizes during in‑process checks. This balance of reach and stiffness is practical for assembly, fixture and tooling checks in small to medium production runs. Practical handling and clear results Operation follows familiar mechanical practice: an easy‑to‑read thimble scale, tactile ratchet feedback and a solid spindle advance, which together make measurements efficient and reproducible on the shop floor. The instrument’s straightforward design reduces operator training time while the robust surfaces and precision mechanics preserve measurement integrity across repeated cycles. Supplied under the Metav IndustryLine label, the unit is positioned as a durable, no‑nonsense tool for routine inspection. Contact Metav Werkzeuge for specific application advice and to arrange procurement of the Metav IndustryLine M309.032 five‑point outside micrometer Technical data SKU: M309.032 GTIN: 4054469117638 eClass: 21170328 Tariff number: 90173000 Facts Measuring range: 25–45 mm Reading / resolution: 0.01 mm Indicated accuracy: ±0.005 mm Setting size: 25 mm Special features Carbide measuring faces Ratchet stop for consistent force Enamelled frame Matt‑chrome measuring drum Suitable for three‑ and five‑sided workpieces Analog mechanical instrument FAQ What measuring range does this micrometer cover? The micrometer covers a 25–45 mm measuring range; the Metav IndustryLine M309.032 is intended for close‑range external measurements within that band. How fine is the reading and what accuracy can be expected? The thimble provides a 0.01 mm reading and the instrument is specified with an accuracy of ±0.005 mm for reliable workshop control. Is the instrument suitable for pentagonal and prismatic parts? Yes, the design is intended for five‑point external checks and is suitable for three‑ and five‑sided workpieces commonly encountered in production. How does the ratchet stop help measurement quality? The ratchet stop on the M309.032 ensures a consistent measuring force, reducing operator‑induced variation and improving repeatability for series inspections. Are the measuring faces durable for harder materials? The micrometer is fitted with carbide measuring faces, which enhance wear resistance when measuring harder components and support longer service intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50 mm Digital Micrometer 0.001 mm Resolution, Friction Thimble, Auto-Off, Plastic Case - Metav IndustryLine
Take advantage of the combination of 1 µm resolution, a robust friction ratchet and a clear digital display for repeatable external measurements in small to medium components; order the micrometer directly via Metav Werkzeuge or consult the team for application advice. Digital micrometer M302.005.N — 25–50 mm, 0.001 mm resolution (Metav IndustryLine) The Digital micrometer M302.005.N is a workshop-ready external measuring instrument for precision checks and quality control within the 25–50 mm measuring range. 1 µm resolution (0.001 mm) readout Measuring range 25–50 mm Friction ratchet and automatic switch-off Protective delivery case included High-precision checks with laboratory-level readout The micrometer delivers a readout of 0.001 mm (1 µm), which raises the measurement capability above common workshop instruments and supports tighter tolerance checks during incoming inspection and small-batch production. The finely graduated digital system reduces interpretation errors compared with analogue scales, while the hardened measuring faces and compliance with DIN 863 ensure abrasion resistance and consistent contact geometry. This combination makes the tool suitable for dimensional control tasks where millimetre-scale differences must be translated into reliable pass/fail decisions. Efficient workflow through intuitive digital controls A compact digital module with ON/OFF/SET and ABS/INC/UNIT controls enables rapid toggling between absolute and incremental modes and the selection of measurement units, accelerating routine checks on the shop floor. The integrated auto-off function preserves battery life without manual intervention, and the friction ratchet promotes repeatable clamping torque for uniform measuring force. These elements cut cycle time per measurement and lower operator-induced variability, supporting predictable throughput in production and service environments. Built for everyday workshop reliability Constructed to withstand regular use, the instrument incorporates robust contact faces (Ø 6.5 mm) and a chassis designed for stable handling during external measurements. The digital display is clear and ergonomically positioned to keep both hands free for component handling, while the friction coupling prevents over-tightening and damage to delicate parts. Together, these features provide a pragmatic mix of precision and durability that benefits maintenance teams, toolrooms and small-series manufacturers who require dependable, repeatable results. Traceability, transport and practical delivery The micrometer is supplied in a protective case for safe transport and storage, ensuring the measuring faces remain undamaged between uses. Product identifiers such as SKU and GTIN are provided for inventory control and traceable procurement. For customers seeking measurement documentation or integration into existing quality processes, the Metav sales consultants can advise on calibration intervals and procedural integration to maintain measurement integrity across production cycles. For traceable 1 µm external measurements and tailored delivery from Emmerich, contact Metav Werkzeuge for a quotation and application guidance. Technical Data Article number: M302.005.N GTIN: 4054469113807 ECLASS: 21170328 ETIM: EC003590 Label: Digital-Mikrometer, 25 - 50 mm Ablesung 0,001 mm; Auto-Off Facts Measuring range: 25–50 mm Readout / resolution: 0.001 mm (1 µm) Measuring faces diameter: 6.5 mm Standard: DIN 863 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT buttons Friction ratchet (controlled measuring force) Automatic switch-off (auto-off) Delivered in protective case FAQ What accuracy can be expected from the instrument? The micrometer M302.005.N offers a readout resolution of 0.001 mm; combined with the mechanical design and hardened faces it is suitable for fine workshop inspections and tighter tolerance checks. Can the display switch between absolute and incremental modes? Yes, the unit supports ABS/INC operation via the digital controls for comparative measurements and setting reference points. Is the instrument delivered ready for use and protected for transport? The micrometer is supplied in a protective case and ready for immediate use; handling in the case reduces the risk of damage to the measuring faces during transport. Which measurement range does the tool cover and for which tasks is it intended? The instrument covers 25–50 mm and is intended for external dimensional control on small to medium components in workshop, toolroom and inspection routines. Does the micrometer include a friction coupling to avoid over-tightening? Yes, the device features a friction ratchet (friction coupling) to ensure consistent measuring force and to protect both the instrument and the workpiece. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50 mm Digital Micrometer 0.001 mm Resolution, IP65, Ratchet, Supplied in Case - Metav IndustryLine
Benefit from 0.001 mm resolution combined with a ratchet thimble and IP65 protection to secure repeatable, workshop‑ready measurements; order the digital micrometer directly via Metav Werkzeuge or consult our advisors for application guidance. Metav IndustryLine Digital Micrometer M302.245.N — 25–50 mm, 0.001 mm resolution Metav IndustryLine Digital Micrometer M302.245.N is a precision measuring instrument for standard workshop and quality‑control tasks in the 25–50 mm range. 0.001 mm resolution for micrometre-accurate readings IP65-rated protection for workshop environments Ratchet thimble ensures consistent measuring pressure Digital display with automatic shut-off to save battery High-precision performance for routine quality control The instrument delivers a resolution of 0.001 mm, making it suitable where sub‑micrometre distinction matters for process control and incoming inspection. The 25–50 mm measuring range places the tool in the standard class for general mechanical engineering tasks, offering the best balance between reach and rigidity. The combination of fine resolution and a clearly readable digital display reduces interpretation error and speeds up logging, supporting a more efficient quality workflow. Robust design for repeatable measurements in the workshop Constructed with a lacquered frame and a matt‑chromed measuring thimble, the device resists everyday wear while maintaining stable geometry. The ratchet thimble provides a tactile end‑stop that standardises contact force, avoiding measurement variation caused by differing operator pressure. The IP65 rating protects against dust and jets of water, so the micrometer remains reliable on the shop floor or at bench stations where coolant mist or fine debris occur. Measuring faces of 6.5 mm diameter give a predictable contact area for improved repeatability. Standards, traceability and workflow advantages Specified to DIN 863, the micrometer meets recognised workshop norms for mechanical micrometres and supports traceable measurement routines. The automatic shut‑off prolongs battery life without manual intervention, while the unit’s simple millimetre‑only readout keeps data entry straightforward for standardised documentation. As part of the Metav IndustryLine, the instrument benefits from distribution and quality screening via Metav Werkzeuge in Emmerich, which helps to ensure consistent supply and practical after‑sales reliability for production and maintenance environments. For application advice or to secure the Metav IndustryLine digital micrometer M302.245.N for the workshop, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M302.245.N GTIN: 4054469115429 Category: Micrometres Brand: Metav IndustryLine Facts Measuring range: 25–50 mm Resolution / reading: 0.001 mm Measuring faces: 6.5 mm Protection class: IP65 Standard: DIN 863 eClass: 21170328 Special features Frame lacquered, measuring thimble matt chrome‑plated Ratchet thimble for constant measuring force Digital display only in mm with automatic shut‑off Suited for routine workshop and quality control tasks FAQ What accuracy and resolution can be expected from this micrometer? The Metav IndustryLine digital micrometer M302.245.N provides a resolution of 0.001 mm and is specified to DIN 863, offering the fine distinction required for many workshop and inspection routines. Is the instrument robust enough for use at the machine bench? Yes. The IP65 rating and a lacquered frame with a matt‑chromed thimble make the device resilient to dust and coolant mist, while the ratchet thimble helps maintain repeatable contact force during shop‑floor use. Which measuring range does this micrometer cover and what classification does that imply? The measuring range of 25–50 mm places the tool in the standard class for general machining and assembly applications, providing a practical compromise between reach and rigidity. Does the display offer unit switching and power saving features? The display on the M302.245.N reads only in millimetres and includes an automatic shut‑off function to conserve battery life during intermittent use. Is calibration traceable to recognised standards? Calibration follows the manufacturer’s standard procedure; ISO 17025 calibration is not specified for this item by default. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50 mm Digital Micrometer 0.001 mm Resolution, Ratchet, Hardened Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high resolution, a secure ratchet stop and a robust matt‑chrome measuring drum for reliable, repeatable thickness checks in fine‑mechanical work. Order the micrometer directly via Metav Werkzeuge or ask the consultants for application advice. Digital Micrometer M302.255 — 25–50 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometer M302.255 is a compact industrial micrometer designed for precise dimensional checks in small components and precision workshops. High‑resolution 0.001 mm readout Ratchet stop for consistent measuring force Hardened 6.5 mm measuring faces Precise results where repeatability matters The micrometer delivers a resolution of 0.001 mm, enabling clear distinction of fine tolerances typical in precision engineering and instrument making. The integrated ratchet stop standardises the measuring force, which reduces operator‑induced variation and improves repeatability across series inspections. Compliance with DIN 863 confirms industry‑standard geometry and measuring practice, making the tool suitable for typical inspection tasks in mechanical workshops and production control. Digital functions that streamline measurement work A clear digital display with ON/OFF/SET and ABS/INC/UNIT keys allows quick switching between incremental and absolute modes and rapid unit selection. The matt‑chrome measuring drum and lacquered frame provide a low‑glare, tactile surface that aids precise adjustment and reading in routine use. These features translate into faster measurement cycles and fewer transcription errors during quality checks, supporting higher throughput without sacrificing accuracy. Compact range tailored to fine mechanical applications With a measuring range of 25–50 mm, this instrument belongs to the micro range ideal for watchmaking, small assemblies and fine‑part inspection: a balance of reach and rigidity that keeps the spindle and anvil stable while measuring small diameters. The hardened measuring faces (6.5 mm) resist wear, retaining reference geometry over long service life and ensuring consistent contact conditions during repeated use. Contact Metav Werkzeuge for application advice or to secure this Metav IndustryLine micrometer for the workshop. Technical Data Article number: M302.255 GTIN: 4054469151731 Category: Micrometers Norm: DIN 863 ECLASS: 21170328 ETIM: EC003590 Facts Measuring range: 25–50 mm Resolution: 0.001 mm Measuring faces diameter: 6.5 mm Tariff number: 90173000 Special features Material: frame lacquered; measuring drum matt‑chrome plated Digital display with ON/OFF/SET and ABS/INC/UNIT functions Ratchet stop for consistent measuring force Hardened measuring faces Digital instrument (electronic readout) SKU: M302.255 FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 25–50 mm, suited to micro‑range precision tasks. What resolution and display functions are available? The instrument provides a 0.001 mm resolution and a digital display with ON/OFF/SET plus ABS/INC/UNIT keys for absolute/incremental reading and unit selection. How does the ratchet stop affect measurement quality? The ratchet stop ensures a consistent measuring force; this reduces operator variance and improves repeatability when using the M302.255 for series checks. Are the measuring faces wear‑resistant? Yes, the micrometer is fitted with hardened measuring faces (6.5 mm) designed to maintain accuracy over prolonged use. Is the instrument suitable for workshop inspection and small series control? The digital micrometer M302.255 is intended for precision workshop inspection and small series control where fine resolution and repeatability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50 mm Digital Micrometer With Offset Measuring Faces 0.001 mm Resolution, Plastic Case - Metav IndustryLine
This compact digital micrometer combines 0.001 mm reading with a reliable ±0.005 mm accuracy and a ratchet spindle for repeatable measuring force — ideal for precise small-part inspection. Order the digital micrometer directly via Metav Werkzeuge or ask the consultants for application advice. Digital micrometer M302.112.C — Offset measuring faces, 25–50 mm, 0.001 mm The Digital micrometer M302.112.C is a compact, workshop-ready micrometer with offset measuring faces, designed for precise measurement of small components in the 25–50 mm range. Digital display with ABS/INC and unit selection 0.001 mm resolution for precise readings Measuring range 25–50 mm for workshop use Ratchet spindle ensures consistent measuring force Accurate measurement for small components The micrometer delivers a 0.001 mm display resolution with an operational accuracy of ±0.005 mm, making it suitable for fine mechanical tasks where repeatability matters. The instrument’s measuring faces (Ø 2 mm, 5 mm long) concentrate contact on the measured detail, reducing influence from nearby geometry. The integral ratchet spindle provides constant measuring force, which minimises operator-induced variation and supports reliable process control in quality checks. Fast, clear readings and practical handling Equipped with a digital display and tactile keys (ON/OFF, ABS/INC, UNIT, SET), the device reduces reading errors and speeds up inspection routines. The 0.5 mm spindle pitch balances fine control with swift closing of the jaws, while the painted frame gives a familiar, robust feel on the bench. These features together make measurement cycles more efficient, helping to keep throughput steady without sacrificing precision. Robust design for regular workshop use A painted, sturdy frame and hardened measuring faces ensure the tool withstands everyday handling while maintaining accuracy over time. The compact form factor and moderate weight (0.7 kg) make the instrument easy to manoeuvre for repetitive checks or when working on delicate assemblies. Classified in the micro range (measuring span within 10–100 mm), this micrometer is optimised for small parts such as precision turned components, fittings and sub-assemblies. Integration and traceability in the inspection routine The unit offers a data output interface (RB 4.1) for connection to inspection data systems, enabling straightforward transfer of results into quality documentation. The combination of digital readability, reliable mechanical control and measurable accuracy supports rational decision-making on the shop floor: fewer ambiguous readings, faster acceptance or rejection, and a clearer audit trail for quality records. For tailored advice on using the Metav IndustryLine digital micrometer in production or to secure matching measuring equipment, contact Metav Werkzeuge GmbH in Emmerich by phone or email as listed below. Technical Data Article number: M302.112.C GTIN: 4054469114583 Category: Micrometers Facts Measuring range: 25–50 mm Resolution (reading): 0.001 mm Accuracy: ±0.005 mm Weight: 0.7 kg Spindle pitch: 0.5 mm Measuring faces: Ø 2 mm, 5 mm long Display type: Digital with ON/OFF, ABS/INC, UNIT and SET Special features Painted frame Ratchet spindle for constant measuring force Hardened measuring faces Data output: RB 4.1 FAQ What is the measurement range of this micrometer? The micrometer measures from 25 to 50 mm and is optimised for small-component inspection within that span. How fine is the resolution and what accuracy can be expected? The device shows readings at 0.001 mm resolution and is specified with an accuracy of ±0.005 mm. Does the micrometer support data transfer to a PC or logger? Yes. The micrometer includes a RB 4.1 data output for connection to data-collection systems. Are the measuring faces suitable for wear resistance? The instrument is supplied with hardened measuring faces (Ø 2 mm, 5 mm long) for improved durability in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50 mm Digital Micrometer With Pointed Measuring Faces, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of rugged protection, traceable calibration and fine resolution for reliable workshop and laboratory measurement. The ISO 17025 calibration certificate and IP65-rated aluminium housing ensure traceability and durability; order the instrument via Metav Werkzeuge or consult our specialists for application advice. Microtech CertiMet POINT digital micrometer (25–50 mm) — IP65, ISO 17025 calibrated The Microtech CertiMet POINT digital micrometer is a precision outside micrometer for workshop and laboratory use, designed for repeatable measurements of components from 25 to 50 mm. CertiMet POINT digital micrometer IP65 Friction thimble for repeatable contact mm/inch, origin and hold functions Aluminium housing with IP65 protection ISO 17025 calibration certificate included Precise results through fine resolution and controlled contact The instrument delivers a resolution of 0.001 mm paired with a rated accuracy of ±0.004 mm, making it suitable for demanding quality-control tasks where small deviations matter. The friction thimble and rotating spindle ensure a consistent contact force, reducing operator influence on the reading; this controlled contact converts mechanical stability into measurable reliability. For users transitioning from analogue tools, the digital readout provides faster, clearer numeric results while preserving the tactile control of a conventional micrometer. Robust design for workshop and field environments An aluminium housing with IP65 ingress protection protects electronics and mechanics against dust and water jets, extending service intervals in busy workshops. The instrument integrates practical functions — mm/inch selection, origin setting and a hold key — to speed up repetitive tasks and data capture. The pointed measuring faces are suited to small contact points and fine features; the rotating spindle aids in fast engagement. Together these features reduce process time and increase the throughput of inspection routines. Traceability and usability that support quality systems This micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), providing documented traceability for audits and internal quality assurance. The digital interface includes ON/ABS, SET and HOLD functions to support standardised measurement procedures and simplified data transfer workflows. With these attributes, the instrument is a practical choice for production testing and laboratory verification where documented measurement validity is required. Contact Metav Werkzeuge for tailored application advice and request the ISO 17025 calibrated CertiMet POINT micrometer (SKU 110450501) for prompt dispatch and technical support. Technical data Article number: 110450501 GTIN: 4061905040771 Manufacturer: Microtech Metrology Measuring range: 25–50 mm Display: digital (ON/ABS, SET, HOLD, mm/inch) Facts Resolution: 0.001 mm Accuracy: ±0.004 mm Protection class: IP65 Measuring faces: pointed Special features Friction thimble micrometer head Rotating spindle Aluminium housing with IP65 protection ISO 17025 calibration certificate included (Ilac MRA) Digital functions: ON/ABS, SET, HOLD, mm/inch FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 25–50 mm, suitable for small to medium components and precision workshop work. Is the instrument supplied calibrated? Yes, the micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), confirming traceability and suitability for quality-assurance use. Which functions are available on the digital display? The digital display offers ON/ABS, SET, HOLD and mm/inch selection to support both metric and imperial workflows and to freeze readings for documentation. How does the friction thimble improve measurement consistency? The friction thimble provides a repeatable contact force during closure; combined with the rotating spindle, this reduces operator-induced variation and improves repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50 mm Ratchet-Stop Outside Micrometer, 0.01 mm Graduation, ISO 17025 Calibration Certificate Included - Microtech Metrology
Take advantage of high accuracy (0.002 mm) together with a ratchet stop and an ISO 17025 calibration certificate for reliable, traceable external measurements in the 25–50 mm range; order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Micrometer 25–50 mm — 0.002 mm accuracy, ratchet stop Micrometer 25–50 mm designed for repeatable external measurement tasks in inspection benches and machine shops, supplied with an ISO 17025 calibration certificate High accuracy: 0.002 mm Ratchet stop for repeatable force ISO 17025 calibration certificate included Measuring range 25–50 mm Precision and reproducibility for inspection tasks This analogue measuring instrument delivers high accuracy of 0.002 mm, making it suitable for quality-control routines where reproducibility matters. The engraved graduation of 0.01 mm supports fine reading steps, while the ratchet stop ensures consistent measuring force to reduce operator variance. As a result, measurement scatter is lowered and decisions on acceptance or rework can be made with greater confidence, supporting efficient shop-floor workflows and fewer repeat operations. Robust handling and ergonomic design for daily use The gauge combines a compact, tactile frame with a mechanical ratchet mechanism that protects the spindle and provides uniform contact pressure. The solid feel and simple analogue operation favour rapid measurements of external features such as shafts, pins and turned parts, and reduce setup time during batch checks. Maintenance is straightforward: periodic cleaning and lubrication preserve accuracy and prolong service life, so the tool remains a dependable partner in the workshop. Traceable calibration and quality assurance Supplied with an ISO 17025 calibration certificate, the instrument meets stringent traceability requirements for internal audits and supplier chains. The included certificate documents the calibration state at delivery and supports quality records without additional delay. For facilities that require documented evidence of measurement capability, the presence of formal calibration removes uncertainty and accelerates conformity checks. Typical applications and suitability in the metalworking environment Well matched to inspection benches, subcontracted machining checks and in‑process control, this measuring instrument covers common external measurement needs across mechanical engineering and maintenance departments. The 25–50 mm range sits between micrometre sizes for small components and larger gauges, offering a balance of reach and stiffness that suits turning shops and small-series production. Reliability and traceability combine to lower measurement risk in routine tasks. For traceable precision backed by Microtech Metrology, contact Metav Werkzeuge for tailored advice and to secure this ISO 17025 calibrated micrometer — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110110501 GTIN: 4061905457098 Manufacturer: Microtech Metrology Core measurements Measuring range: 25–50 mm Reading/graduation: 0.01 mm Accuracy: 0.002 mm SKU: 110110501 Features and applications Analogue instrument for external measurement Ratchet stop micrometer head Calibration certificate included (ISO 17025) Category: Micrometers FAQ What measuring range does the micrometer cover? The micrometer covers an external measuring range of 25–50 mm suitable for shafts, pins and similar turned parts. Is calibration included with delivery? Yes, the instrument is delivered with a calibration certificate issued to ISO 17025, confirming its measured performance at the time of calibration. What accuracy can be expected in typical use? The instrument is specified with an accuracy of 0.002 mm and a reading graduation of 0.01 mm, with the ratchet stop helping to ensure repeatable contact force. Is the tool suitable for workshop inspection and routine quality control? Yes, this analogue micrometer from Microtech Metrology is intended for workshop inspection tasks and routine quality-control checks where traceability and repeatability are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50 mm Universal Micrometer With 7 Pairs Of Measuring Inserts Color Touchscreen, IP65, ISO 17025 - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, robust IP65 protection and wireless + USB data output for traceable, workshop-ready precision; the included seven pairs of measuring inserts extend versatility across small components. Order directly via Metav Werkzeuge or consult Metav’s specialists for tailored measurement solutions. Universal micrometer – Digital micrometer with ISO 17025 calibration and Wireless + USB connectivity (Microtech Metrology) The Universal micrometer is a precision digital micrometer designed for workshop and laboratory use in the 25–50 mm range, offering rugged ingress protection and traceable calibration for repeatable results. ISO 17025 calibrated with certificate included IP65 protection for harsh workshop environments Wireless + USB data transfer for easy logging Precision where small details matter The micrometer delivers an accuracy of 0.003 mm, enabling reliable dimensional checks on small components and precision parts. Classified for the 25–50 mm range (micro category), it combines short measuring faces with a stiff frame to reduce bending and produce repeatable results on watchmaking, medical components or fine mechanical parts. The non-rotating spindle reduces measurement variation, while the calibrated status under ISO 17025 ensures that every instrument is supplied with a traceable calibration certificate, simplifying quality documentation and audit trails. Connectivity and robust operation for production use Equipped with a 2.4" colour touchscreen and Wireless + USB data output, the instrument links measurement routines directly into inspection software or spreadsheets, cutting manual transcription errors and speeding up data collection. The IP65 rating protects electronics from dust and water jets, making the device suitable for bench-top use in active workshops. The touch interface provides quick readouts and configuration, while the digital electronics maintain stable readings under typical workshop conditions, supporting efficient process control and quality assurance. Versatility and ready-to-use delivery Supplied with seven pairs of measuring inserts, the micrometer adapts to varied component geometries without the need for immediate accessory purchases. The set arrives fully calibrated to ISO 17025, which means a calibration certificate is included and the tool is ready for traceable inspection tasks on arrival. The combination of compact measuring range, fine accuracy and multiple inserts makes it a practical choice where reproducibility, documentation and flexible fixturing matter most. Contact Metav Werkzeuge to discuss how the Microtech Metrology universal micrometer can be integrated into existing inspection routines and to request the ISO 17025 calibration certificate and technical datasheet Technical data Article number: 110750508 GTIN: 4061905040344 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Facts Measurement range: 25–50 mm Accuracy: ±0.003 mm Protection class: IP65 Data output: Wireless + USB Special features ISO 17025 calibration; calibration certificate included 7 pairs of measuring inserts included Non-rotating spindle Delivered ready for traceable inspection Suitable for workshop and laboratory environments FAQ Is the micrometer delivered calibrated? The micrometer is delivered fully calibrated under ISO 17025 and includes a calibration certificate for traceability. What measurement range does the instrument cover? The instrument covers the 25–50 mm measurement range, making it suitable for micro‑category precision work. How can measurement data be exported? Measurement data can be exported via the integrated Wireless + USB interfaces for direct logging to inspection systems. Is the device suitable for workshop use with dust and coolant? Yes, the micrometer has an IP65 protection rating, providing resistance to dust and water jets for robust workshop use. Are accessories included for different part geometries? The delivery includes seven pairs of measuring inserts, enabling adaptation to a variety of component shapes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Bore Micrometer Flat Anvil, 0.01mm Graduation, Ratchet Stop, Supplied in Case - Metav IndustryLine
Take advantage of precise, repeatable hub measurements with a compact range and robust handling: the micrometer combines an accurate ±0.006 mm measurement capability with a ratchet stop and flat anvil for consistent contact. Supplied in a protective case, order directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine M307.044 – Micrometer for wheel hubs, 25–50 mm, 0.01 mm Metav IndustryLine M307.044 is a compact micrometer designed for accurate measurement of wheel hubs and bore shoulders in workshop environments Accurate to ±0.006 mm Ratchet stop for constant measuring force Flat anvil suited to hub shoulders Supplied in a protective case Precise, repeatable readings for critical hub geometry The gauge offers a 25–50 mm measuring range with a standard reading step of 0.01 mm and a verified accuracy of ±0.006 mm, delivering reliable results where fit and concentricity matter. The finely pitched 0.5 mm spindle and matt‑chromed measuring drum combine to give a tactile, low‑play feel; paired with the ratchet stop, this ensures reproducible contact force and reduces variability from manual pressure. For inspections of bearing seats and bore shoulders, this level of repeatability reduces rework cycles and supports consistent assembly quality. Robust design that suits everyday workshop use Built with a painted frame and a matt‑chromed measuring drum, the instrument withstands typical shop handling while remaining comfortable to operate. The flat anvil profile is optimised for contacting hub shoulders, and the measuring faces, sized at 6.5 mm, concentrate contact area where it is needed for axial stability. At approximately 0.3 kg, the device is light enough for single‑handed use yet rigid enough to avoid flex under normal measurement forces. Supplied in a protective case, the micrometer is protected in transport and storage. Clear technical advantages that speed inspection The combination of fine spindle pitch and ratchet mechanism makes fine adjustments straightforward and reduces measurement scatter during repetitive checks. The device’s resolution and stated deviation support its use for workshop and production quality control tasks where tolerances are tight but measurement throughput remains important. The compact format classified in the micro micrometer class (ideal for short‑reach, high‑precision tasks) facilitates quick checks on smaller components without sacrificing accuracy. Application focus: where this micrometer adds value Intended primarily for measurements of wheel hubs and bore shoulders, the micrometer is also suitable for short‑range internal checks and specific component seating measurements that require a flat contact surface. As a practical instrument for maintenance bays and production lines, it bridges bench metrology and on‑machine control: fast enough for routine checks, accurate enough for verification tasks that feed into assembly decisions. Metav’s selection ensures compatibility with workshop workflows and a straightforward supply chain from Emmerich. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine M307.044 in specific hub inspection workflows or to arrange delivery from our Emmerich site: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: M307.044 GTIN: 4054469167046 Category: Micrometers (Messschrauben) Taric code: 90173000 Facts Measuring range: 25–50 mm Resolution (reading): 0.01 mm Accuracy: ±0.006 mm Measuring faces diameter: 6.5 mm Spindle pitch: 0.5 mm Weight: 0.3 kg Special features Material: painted frame; matt‑chromed measuring drum Ratchet stop: integrated Protective case: supplied for transport and storage Suitable for: measurements of wheel hubs and bore shoulders FAQ What measuring range does this micrometer cover? The Metav IndustryLine M307.044 covers a range of 25–50 mm, making it ideal for small to medium hub and shoulder measurements. How accurate is the micrometer in workshop use? The device provides an accuracy of ±0.006 mm and a reading resolution of 0.01 mm, supporting precise dimensional checks on seating and hub features. Why is the ratchet stop important? The ratchet stop on the M307.044 ensures a consistent measuring force for every reading, improving repeatability during series inspections. Are measuring faces suitable for hub shoulders? Yes, the micrometer has flat measuring faces (6.5 mm) designed to seat reliably on bore shoulders and hub surfaces. Is a protective case included for transport? A protective case is supplied with the instrument to protect the micrometer during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Depth 100mm Micrometer Caliper 0.01mm Resolution Ratchet Stop, DIN 863 Plastic Case - Metav IndustryLine
The combination of a 100 mm anvil depth, fine 0.01 mm graduation and a ratchet spindle delivers repeatable deep‑reach measurements with workshop robustness; this micrometer suits precision toolmaking and fixture inspection. Order or request specification guidance via Metav Werkzeuge if assistance is needed. M307.032 frame micrometer — large anvil depth, 25–50 mm range, 0.01 mm graduation (Metav IndustryLine) The M307.032 frame micrometer is a precision measuring instrument for deep‑reach external measurements in machining and toolmaking, combining a long‑reach frame with an analogue nonius for fine resolution. 100 mm anvil depth for deep measurements Measuring range 25–50 mm 0.01 mm graduation on analogue scale Ratchet spindle for constant measuring force Matt‑chrome measuring drum and painted frame Consistent accuracy for production checks and set‑ups This micrometer provides 0.01 mm graduation on an analogue nonius, enabling precise readings suitable for many workshop inspection tasks. The inclusion of a ratchet spindle preserves repeatability by limiting applied measuring force, reducing operator influence on results; the spindle pitch 0.5 mm supports fine, predictable engagement and the spindle diameter of 6.5 mm adds rigidity during measurement. Compliance with DIN 863 ensures the instrument meets recognised mechanical micrometer standards, giving purchasers a verifiable baseline for routine quality control. These characteristics make the tool a rational choice for users seeking reliable, repeatable external measurements. Reach where standard micrometers cannot With a 100 mm anvil depth, this frame micrometer is designed to access recessed or deep external features that conventional micrometers cannot reach. Classified in the micro band for precision instruments (appropriate for ranges up to 100 mm), it bridges delicate component inspection and general workshop needs: ideal for small‑batch component checks, fixture and gauge work, and assemblies where contact points lie well inside recesses. The 25–50 mm measuring span offers a focused window of high stiffness and controllability, combining reach with the handling familiarity of a compact micrometer. Mechanical design that supports everyday workflow The painted frame and matt‑chrome measuring drum deliver a durable finish with reduced glare for easier reading under workshop lighting. Hardened measuring faces and a robust frame profile contribute to long‑term dimensional stability and resistance to wear in daily use. The analogue scale, while simple, benefits from the tactile feedback of the ratchet and the certainty of mechanical engagement — an advantage in fast production environments where sensor or battery dependence is not wanted. These practical design choices translate into lower downtime and straightforward maintenance compared with more complex digital instruments. How to use and maintain for best results For consistent outcomes, the instrument should be handled with the same rotating motion on the ratchet until the stop engages, ensuring uniform measuring force. Keep measuring faces clean and free from chips or coolant; a soft cloth and light instrument oil are sufficient for routine care. Periodic verification against a calibrated gauge block is recommended to confirm ongoing accuracy. As an analogue tool, the device is inherently simple to service and repair, reducing lifecycle complexity and supporting uninterrupted shop use. Why this model belongs in a modern metrology kit The micrometer merges precise graduation, a long anvil depth and a mechanical ratchet into a compact, sturdy package that complements both bench and on‑machine inspection tasks. Its features deliver measurable productivity advantages: faster set‑ups, fewer repeat measurements and reliable results that support process control. For procurement teams and workshop managers, the model represents a pragmatic balance of precision and robustness, making it a sensible addition to metrology assortments that serve machining, maintenance and quality assurance roles. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M307.032 frame micrometer into workshop or production workflows and to request technical documentation Technical data SKU: M307.032 GTIN: 4054469117331 Standard: DIN 863 Type: Analogue frame micrometer Facts Measuring range: 25–50 mm Maximum anvil depth: 100 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Special features Ratchet spindle for consistent measuring force Painted frame and matt‑chrome measuring drum Hardened measuring faces Analogue nonius reading FAQ What measuring range does the micrometer cover? The M307.032 frame micrometer covers a measuring range of 25–50 mm, offering a focused span with enhanced rigidity for accurate external measurements. How deep can the micrometer reach into a recess? The instrument features a 100 mm anvil depth, allowing access to recessed external features that standard micrometers cannot reach. Is the spindle designed to improve repeatability? Yes, the ratchet spindle on the M307.032 provides a controlled measuring force so that successive measurements remain consistent. Which standard does this micrometer conform to? The micrometer is manufactured to align with DIN 863 mechanical micrometer requirements, ensuring recognised dimensional and construction standards. What maintenance is recommended to preserve accuracy? Regular cleaning of the measuring faces and occasional verification against gauge blocks are advised to maintain performance of the M307.032. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Dial Anvil Micrometer Ø60mm Face, Painted Frame, Matt Chrome Thimble, Factory Standard, Supplied in Case - Metav IndustryLine
Take advantage of a compact, workshop-ready micrometer that combines a 25–50 mm measuring range, large Ø60 mm measuring faces for stable contact and a fine 0.01 mm graduation for repeatable readings; order directly via Metav Werkzeuge or consult the team for specification advice. Disc-anvil micrometer M309.151 — 25–50 mm range, Ø60 mm measuring faces (Metav IndustryLine) The Disc-anvil micrometer M309.151 is an analogue precision instrument designed for robust workshop measurement of flat and slightly compliant components across the 25–50 mm range. 25–50 mm measuring range Ø60 mm measuring faces 0.01 mm resolution and 0.008 mm accuracy Delivered in protective case Accuracy where repeatability counts This analogue micrometer delivers a measured accuracy of 0.008 mm with a 0.01 mm graduation on the thimble, which makes it suitable for routine quality checks and production control. The larger disc-shaped anvil provides a stable contact surface that reduces local deformation on soft materials and spreads contact pressure, improving reproducibility when comparing successive measurements. Such technical attributes translate into fewer out-of-tolerance parts and a steadier process flow in small-batch or maintenance contexts. Robust construction for everyday use A painted frame and a matt chrome-plated thimble combine corrosion resistance with a non-reflective finish that eases reading under workshop lighting. The unit is supplied in a protective case for safe transport and storage, protecting the measuring faces and the spindle from knocks that can affect calibration. At approximately 1.1 kg, the instrument balances solidity with manageable handling; the construction supports frequent use on the shop floor without excessive operator fatigue. Practical handling and typical applications Designed as a workshop micrometer, this instrument suits tasks such as component verification, incoming inspection and maintenance measurement on assemblies, panels and sheet parts. The Ø60 mm measuring faces are particularly advantageous when measuring bearings, flanges or broader surfaces where point contact would be unreliable. The analogue design keeps operation straightforward and serviceable, while the clear graduation simplifies training for technicians and apprentices. For reliable workshop measurement with a Metav IndustryLine micrometer, contact Metav Werkzeuge for delivery options and tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: M309.151 GTIN: 4054469118437 Category: Micrometers Standard: Werksnorm Facts Measuring range: 25–50 mm Minimum range value: 25 mm Maximum range value: 50 mm Resolution (graduation): 0.01 mm Stated accuracy: 0.008 mm Weight: 1.1 kg Tariff number: 90173000 Special features Frame: painted frame Thimble: matt chrome-plated thimble Display type: analogue Measuring faces: Ø60 mm disc Delivery: protective case for transport FAQ What is the measuring range of this micrometer? The micrometer covers a 25–50 mm range, suitable for standard workshop components and detail checks. How fine is the graduation and what accuracy can be expected? The instrument has a 0.01 mm graduation and a stated accuracy of 0.008 mm, allowing reliable repeatability for production and inspection tasks. Are the measuring faces robust enough for repeated use? Yes, the Ø60 mm disc measuring faces provide a broad contact area that reduces local indenting and supports repeated measurements without rapid wear. Is the micrometer supplied ready for transport and storage? Delivery includes a protective case, intended for safe transport and to help maintain the instrument’s condition between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Dial Bore Gauge 0.01mm Resolution, Interchangeable Dial, Sliding Travel 8mm, Case Included - Metav IndustryLine
Take advantage of the combination of high repeatability, 0.01 mm resolution and robust construction for consistent series measurement results; order the instrument directly via Metav Werkzeuge or request expert advice from our consultants. M307.109 Micrometer with Dial Gauge — 25–50 mm, 0.01 mm resolution (Metav IndustryLine) The M307.109 is an analogue micrometer with integrated dial gauge, engineered for repeatable series measurements in production and workshop environments. High repeatability for series measurement Measuring range 25–50 mm Reading accuracy 0.01 mm Matt chrome-plated frame and drum Precision and repeatability optimised for production control The instrument delivers high repeatability, making it suitable for repetitive quality checks on batches and subassemblies. The 0.01 mm graduation of the dial gauge provides clear visual feedback for fine adjustments, while the screw design with a 0.5 mm pitch ensures predictable axial movement per spindle turn. This combination reduces cycle-by-cycle variation and supports tighter process control in machining and assembly workflows. Robust mechanical design for dependable workshop use Constructed with a matt chrome-plated frame and measuring drum, the device resists wear from routine handling and maintains readable surfaces under practical shop conditions. The spindle diameter of 6.5 mm contributes to a stable contact interface, limiting deflection during measurement. Delivered in a protective transport case, the instrument is ready for safe storage and transfer between workstations without compromising its alignment or accuracy. Practical handling and integration into inspection routines The analogue dial gauge offers an intuitive readout that integrates easily into existing inspection procedures and operator training. Its 25–50 mm measuring range covers the common mid-range dimensions encountered in mechanical and toolroom inspection, reducing the need for multiple specialised gauges. Clear mechanical feedback and durable components make the instrument a reliable choice where straightforward operation and predictable measurement behaviour are priorities. Application advantages and quality assurance Engineered for workshop and light production environments, the micrometer supports routine QC checks and incoming inspection tasks. The focus on repeatability and a fine 0.01 mm scale aids in detecting small deviations early in the process, helping to prevent costly rework. As part of a quality toolkit, the instrument complements calipers and specialised gauges to create a balanced measurement set for component verification. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M307.109 micrometer can be integrated into existing inspection routines or to request a tailored quote from our specialists. Technical Data SKU: M307.109 GTIN: 4054469117423 Category: Messschrauben Manufacturer: Metav IndustryLine Facts Measuring range: 25–50 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Special features Analogue dial gauge Frame and measuring drum matt chrome-plated Higher repeatability, ideal for series measurements Supplied in a protective transport case FAQ What measuring range does the micrometer cover? The M307.109 micrometer covers a measuring range of 25–50 mm, suitable for mid-range component checks. What is the resolution and typical application for the dial gauge? The dial gauge reads to 0.01 mm and is intended for repeatable series measurements and routine workshop quality control. Is the instrument suitable for production environments? Yes, the Metav IndustryLine M307.109 is designed for workshop and light production use where consistent repeatability is required. How is the micrometer protected during transport? The instrument is supplied in a protective transport case to safeguard alignment and finish during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Dial-Back Micrometer With Counting Dial 0.01mm Resolution, Ratchet, Hardened Measuring Faces, DIN 863 - Metav IndustryLine
The combination of a compact 25–50 mm measuring range, a 0.01 mm reading step and a ratchet stop ensures repeatable readings and reliable workshop throughput; order the micrometer via Metav Werkzeuge or contact the consultants for further specification advice. Dial Micrometer M304.052 (25–50 mm) — outside micrometer with counting dial and ratchet stop The Dial Micrometer M304.052 is a precision outside micrometer designed for workshop and inspection use, providing dependable measurements across the 25–50 mm range. *25–50 mm measuring range *Resolution 0.01 mm for fine increments *Ratchet stop for consistent measuring force *Matte chrome thimble, DIN 863 compliant Accurate incremental measurement for routine quality control This outside micrometer delivers precise incremental readings with a resolution of 0.01 mm, supported by a spindle pitch of 0.5 mm that converts fine rotary movement into dependable linear travel. The visible counting dial simplifies repeatable subtraction of full turns and reduces reading errors when performing series measurements. Combined with the ratchet stop, the instrument enforces a consistent measuring force that minimises operator-induced variation, improving first-pass yield in production and reducing rework. These features make the device particularly suitable for component inspection where tight tolerances and rapid throughput are both required. Robust construction that suits everyday workshop demands Constructed with a matte chrome-plated thimble, the micrometer resists glare and offers a tactile finish that aids precise setting under workshop lighting. Conformity with DIN 863 ensures compatibility with established metrology routines and acceptance within standard quality processes. The instrument includes properly finished measuring faces and a stable spindle diameter of 6.5 mm, delivering the stiffness necessary to keep deflection low during contact measurement. The result is a tool that balances sensitivity with durability, designed to withstand the rigours of machine‑shop environments while maintaining measurement integrity. Intuitive operation and service-friendly handling The analogue display with counting mechanism provides a direct visual reference, enabling quick decisions on the shop floor without additional readout devices. The ratchet stop and the carefully calibrated spindle motion support consistent readings across repetitive checks, while the robust mechanical layout keeps maintenance straightforward. Routine checks and interval calibration are recommended to maintain traceability and performance; for tailored calibration intervals or verification procedures, Metav Werkzeuge can advise on practical schedules aligned with production cycles. This micrometer fits seamlessly into a quality-controlled workflow and supports measurable improvements in measurement reproducibility. Contact Metav Werkzeuge today for availability, technical clarification or to request product data sheets for the Metav IndustryLine Dial Micrometer M304.052 Technical Data Article number: M304.052 GTIN: 4054469116129 Manufacturer: Metav IndustryLine Standard: DIN 863 Facts Measuring range: 25–50 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Analog device with counting dial Special features Matte chrome-plated thimble Ratchet stop for defined measuring force Measuring faces included Classified under ETIM EC003590 and eClass 21170328 Customs tariff number: 90173000 FAQ What is the measuring range of the micrometer? The Dial Micrometer M304.052 measures from 25 mm to 50 mm. What resolution and repeatability does the instrument offer? The instrument provides a resolution of 0.01 mm and a spindle pitch of 0.5 mm for fine, repeatable adjustments. Is the ratchet stop present and why is it useful? Yes, the micrometer features a ratchet stop; this ensures a constant measuring force and reduces variation between operators when using the Metav IndustryLine instrument. Does the micrometer conform to any standards? The device complies with DIN 863, making it suitable for standard workshop and inspection procedures. Are measuring faces included with the instrument? Measuring faces are provided as part of the micrometer’s measuring system, ensuring correct contact geometry for outside measurements. How should the instrument be maintained to ensure long-term accuracy? Regular verification and routine calibration are advised; Metav Werkzeuge can provide guidance on appropriate calibration intervals and maintenance practices for the Dial Micrometer M304.052. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Ball-Point Micrometer Friction Thimble, mm/inch/Origin/Hold, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of a robust combination of IP65 protection, a friction thimble for consistent measuring force and a traceable ISO 17025 calibration certificate for reliable quality assurance. Order the instrument directly via Metav Werkzeuge or contact our consultants for technical advice. CertiMet DOUBLE SPHERICAL digital micrometer — Microtech Metrology (digital, IP65, 25–50 mm) The CertiMet DOUBLE SPHERICAL digital micrometer is a rugged, workshop‑grade instrument for precise external measurements of shafts and cylindrical parts, providing repeatable results in demanding production and inspection environments. IP65-rated aluminium housing Friction thimble for consistent measuring force mm/inch conversion and hold function ISO 17025 calibration certificate included Reliable sub‑micrometre resolution for repeatable quality The instrument delivers a resolution of 0.001 mm and a specified accuracy of ±0.003 mm, which enables tight control of external diameters within the 25–50 mm working range. The friction thimble stabilises contact force during measurement, reducing variability caused by hand pressure and improving reproducibility across repeated checks. For production and inspection tasks this means fewer rejects and clearer pass/fail decisions based on measurable tolerances rather than estimations. Built to withstand workshop conditions and handle curved surfaces An aluminium housing with IP65 protection safeguards the electronics against coolant, chips and dust, allowing the device to be used close to machining centres without risk to the electronics. Double spherical measuring faces ensure reliable contact on round or slightly profiled surfaces, improving contact stability and centring on shafts. The digital readout is operated by 0/MODE, SET, UNIT and HOLD buttons, supporting quick mm/inch conversion and temporary data locking for downstream documentation. These design choices make the micrometer a practical tool for both the shop floor and the inspection bench. Traceability and practical functions for quality systems A factory‑issued ISO 17025 calibration certificate (Ilac MRA) is supplied with the micrometer, providing documented traceability suitable for accredited quality processes and internal audits. The instrument supports basic measuring workflow needs — origin setting and a hold function for capturing measurements — without adding unnecessary complexity. As a compact, mechanically robust digital micrometer from Microtech Metrology, it fits into existing inspection routines and complements statistical process control with precise, verifiable readings. Contact Metav Werkzeuge today to request a technical quotation or to reserve the CertiMet DOUBLE SPHERICAL digital micrometer (SKU 110360501) with IP65 protection and ISO 17025 calibration certificate Technical data Article number: 110360501 GTIN: 4061905459108 Manufacturer: Microtech Metrology Numerical data Measuring range: 25–50 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Protection class: IP65 Special features Friction thimble micrometer head Double spherical measuring faces Functions: mm/inch, origin, hold Display buttons: 0/MODE, SET, UNIT, HOLD Calibration certificate: ISO 17025 (Ilac MRA) included Aluminium housing FAQ Is the micrometer suitable for use near machining centres? Yes. The CertiMet double‑spherical digital micrometer features an IP65 aluminium housing, which protects the unit against dust and low‑pressure water jets, making it suitable for workshop proximity to machining operations. What level of accuracy and resolution can be expected? The device provides a resolution of 0.001 mm and an expressed accuracy of ±0.003 mm, allowing precise external diameter checks within the 25–50 mm range. Does the instrument include official calibration documentation? A calibration certificate conforming to ISO 17025 (Ilac MRA) is supplied with the micrometer, ensuring traceability for accredited quality systems and audit requirements. Which measurement functions are built in? The micrometer offers mm/inch conversion, an origin‑set function and a hold function, operated via the 0/MODE, SET, UNIT and HOLD buttons on the display. Is this instrument suitable for measuring rounded or profiled shafts? Yes. The double spherical measuring faces are designed to establish reliable contact on cylindrical and slightly profiled surfaces, improving centring and measurement consistency. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Digital Blade Anvil Micrometer Friction Thimble, IP65, ISO 17025 Cal Cert - Microtech Metrology
Reliable workshop measurement with rugged protection and traceable calibration: the combination of IP65 housing, a blade anvil for narrow grooves and an ISO 17025 calibration certificate ensures repeatable results in demanding environments. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. CertiMet BLADE digital micrometer (25–50 mm) — IP65, Blade Anvil by Microtech Metrology The CertiMet BLADE digital micrometer is a precision instrument for external measurements in confined grooves and narrow features, designed for industrial workshops and quality‑control benches. IP65 rated aluminium housing for workshop use Blade anvil 6.5×0.75 mm for narrow grooves ISO 17025 calibration certificate included Metric/imperial readout and data hold function Robust workshop performance that keeps production moving Constructed with an aluminium housing and an IP65 rating, this digital micrometer tolerates coolant splash and dusty shop conditions, reducing downtime and protecting sensitive electronics. The non‑rotating spindle and friction thimble deliver a consistent measuring force, which improves repeatability compared with ad‑hoc manual contact. For production teams this means fewer retests and a steadier inspection throughput, while the instrument's solid build supports everyday handling on the shop floor. Precise blade geometry for measurements in tight places The specialised blade anvil (6.5×0.75 mm) enables reliable contact inside narrow grooves and close‑edge features that standard flat anvils cannot reach. With a measurement range of 25–50 mm and a stated accuracy of ±0.004 mm, the device bridges routine workshop checks and fine quality control tasks. The digital readout with 0/MODE, SET, UNIT and HOLD functions allows quick switching between mm/inch and stable capture of readings, reducing transcription errors during QC documentation. Traceability and calibration for certified inspection Delivered with an ISO 17025 calibration certificate (Ilac MRA), the instrument is suited for environments where documented traceability is required. The included certificate confirms that the measuring chain was checked against accredited standards, simplifying integration into calibration schedules and quality management systems. This formal verification supports procurement and audit requirements and increases confidence in measurement results used for acceptance or rejection decisions. Ergonomics and data clarity to speed routine work A clearly legible digital display combined with a hold function allows operators to stabilise readings when access is awkward or when parts must be rotated between fixturing steps. The compact blade geometry and the micrometer’s balanced weight aid single‑handed operation, while the friction thimble promotes consistent force application across repeated measurements. For maintenance technicians and inspectors, these features translate into faster inspection cycles and reduced measurement uncertainty. Choose the Microtech Metrology CertiMet BLADE for reliable groove and edge measurement and contact Metav Werkzeuge in Emmerich for tailored advice or to request the ISO 17025 calibration documentation by phone or email Technical data SKU: 110660501 GTIN: 4061905457173 Manufacturer: Microtech Metrology Numerical data Measurement range: 25–50 mm Resolution: 0.001 mm Accuracy: ±0.004 mm Protection class: IP65 Special features Blade anvil 6.5×0.75 mm Non‑rotating spindle Friction thimble micrometer head Aluminium housing Digital display with 0/MODE, SET, UNIT, HOLD buttons Functions: mm/inch, origin, hold Calibration certificate ISO 17025 included (Ilac MRA) FAQ What measurement range does this micrometer cover? The instrument covers a measurement range of 25–50 mm and is presented as the CertiMet BLADE digital micrometer (Microtech Metrology, SKU 110660501). Is the micrometer suitable for wet or dusty workshops? Yes. The IP65 rated aluminium housing protects the electronics against dust ingress and low‑pressure water jets, making it suitable for typical workshop environments. Can the micrometer measure in both millimetres and inches? Yes. The digital readout supports both mm/inch units, selectable via the UNIT button, and includes a HOLD function to freeze readings. Does the device come with an official calibration certificate? Yes. The micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), providing traceable verification for quality systems and audits. Why use a blade anvil instead of a flat anvil? A blade anvil (6.5×0.75 mm) allows contact within narrow grooves and close‑to‑edge features that flat anvils cannot reach, improving measurement access for components with confined geometries. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Digital Bore Gauge Colour 2.4" Touchscreen, Wireless USB, IP65 - Microtech Metrology
Take advantage of the micrometer’s combination of high repeatability (0.004 mm), wireless and USB data transfer, and robust IP65 protection to speed up inspection routines and reduce documentation errors. Order via Metav Werkzeuge or consult the specialists for integration into existing quality workflows. Digital Micrometer 25–50 mm — Microtech Metrology, 2.4" touchscreen, Wireless+USB The Digital Micrometer 25–50 mm is a compact, workshop-ready measuring instrument designed for precise external measurements of small components in production and inspection environments. High precision 0.004 mm accuracy Wireless and USB data output Colour 2.4" touchscreen display IP65 dust and splash protection Ø12 mm measuring faces Consistent precision for fine mechanical parts The instrument delivers 0.004 mm stated accuracy with a display resolution of 0.0001 mm, making it suitable for demanding small-part measurement. This level of control reduces uncertainty when checking turned parts, shafts or precision pins: the tighter accuracy ensures fewer borderline results while the fine resolution allows operators to detect small trends in process drift. As a member of the Micro class, the device is optimised for short-range, high-stability measurement where the short spindle and compact frame minimise bending and handling errors. Streamlined data capture for industry workflows Equipped with Wireless+USB outputs and a responsive 2.4" colour touchscreen, the device supports rapid, low-effort data transfer to quality software and SPC systems, cutting manual transcription time and error rates. The digital interface presents readings clearly and the connectivity options allow both direct logging and integration into inspection stations. These features translate into measurable efficiency gains: fewer manual entries, faster batch checks and a more auditable trace of measurement results. Robust construction for everyday shop use The micrometer is rated IP65, so the electronics are protected against dust ingress and low-pressure water jets — a practical advantage at busy benches or on shop floors. The Ø12 mm measuring faces provide a stable contact area for repeatable measurements across small diameters while the compact form factor supports single-handed operation and swift part handling. Built-in durability combined with clear display feedback reduces rework and downtime in standard production and maintenance tasks. Practical benefits and implementation considerations Beyond the core metrological performance, the device assists with traceability and laboratory-to-shop transferability of measurement data thanks to the digital outputs and standardised reading format. The compact nature of the instrument makes it particularly useful for inspection of micro-series, tooling checks and in-cabinet measurements where space is limited. Integration into existing quality processes is eased by common data interfaces and clear numeric output, enabling faster decision loops in fabrication and assembly. For procurement or process-integration advice, contact Metav Werkzeuge to secure the Microtech Metrology digital micrometer with Wireless+USB outputs and discuss options for delivery and calibration support. Technical data SKU: 133800508 GTIN: 4061905458132 eClass: 21170328 Manufacturer: Microtech Metrology Core specifications Measuring range: 25–50 mm Accuracy: 0.004 mm Resolution (reading): 0.0001 mm Measuring faces diameter: Ø12 mm Display: Colour 2.4" touchscreen Protection rating: IP65 Features Data output: Wireless + USB Digital measuring device Category: Micro class micrometer Compact, workshop-suitable construction FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 25–50 mm, suitable for small components and precision checks. What accuracy and resolution are specified? The instrument specifies an accuracy of 0.004 mm and a display resolution of 0.0001 mm, enabling fine discrimination in inspection tasks. How can measurement data be exported? Measurement data can be exported via Wireless and USB interfaces, allowing straightforward transfer to inspection software or data loggers. Is the device suitable for harsh workshop conditions? Yes. With an IP65 rating and robust measuring faces (Ø12 mm), the instrument resists dust ingress and splash exposure encountered on production floors. Does the product include a calibration certificate? The product data does not specify an included calibration certificate; calibration options should be checked with the supplier or Metav Werkzeuge if a traceable certificate is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Digital Dial Micrometer 0.001mm Readout, Ratchet, Plastic Case - Metav IndustryLine
Take advantage of the combination of high measurement precision, robust handling and straightforward data transfer for reliable quality control in small-part inspection. The tool delivers 0.001 mm resolution, a ratchet stop for repeatable measuring force and RB 4.1 data output for efficient logging — order the micrometer directly via Metav Werkzeuge or ask our consultants for technical advice. Metav IndustryLine Digital disc micrometer ND 25–50 mm, 0.001 mm resolution The Digital disc micrometer ND 25–50 mm, 0.001 mm is a compact precision instrument for dimensional inspection of small components in production, laboratory and workshop environments. High precision 0.001 mm resolution Measurement range 25–50 mm Ratchet stop for consistent force Digital display with ABS/INC and unit keys Consistent metrology for process control The micrometer offers a resolution of 0.001 mm combined with a stated accuracy of 0.004 mm, providing measurable gains in repeatability for routine quality checks. This level of resolution supports tighter tolerance verification than standard 0.01 mm instruments and reduces uncertainty when documenting small-diameter features. The digital readout with ABS/INC switching and unit selection speeds up reading and reduces transcription errors, while the RB 4.1 data interface enables direct transfer of measurement results into inspection software or SPC systems, minimising manual input and accelerating reporting. Design elements that reduce operator influence Engineered for reliable handling, the frame is painted for corrosion resistance and the measuring drum is matt-chrome plated to ensure a smooth spindle action. A non-rotating spindle and integrated ratchet stop enforce a consistent measuring force, which lowers variation between operators and enhances comparability across shifts. At approximately 0.9 kg, the device balances stability and manoeuvrability for bench use; the repeatable mechanical features reduce the influence of handling on the measurement outcome. Data workflow and traceability in inspection routines The micrometer’s digital output (RB 4.1) facilitates automated data capture for traceable inspection records and helps integrate the instrument into a digital quality system. Identifiers such as GTIN and classification metadata support procurement and inventory tracking, while the compact readout functions (ON/OFF, ABS/INC, UNIT, SET) simplify calibration checks and unit conversions. These traits make the instrument suitable where documented measurement trails and quick logging are required, for instance in incoming inspection or final part verification. Typical applications and user groups With a measuring span of 25–50 mm, this instrument is aimed at component manufacturers, toolrooms and laboratory technicians who require exact measurement of small shafts, rings, bores and turned parts. Its combination of fine resolution, mechanical consistency and straightforward digital linking is particularly useful in production environments that demand frequent, repeatable checks without the complexity of larger metrology equipment. The overall package supports efficient in-process control as well as final acceptance testing. For tailored procurement or technical clarification regarding the Metav IndustryLine Digital disc micrometer, contact Metav Werkzeuge for consultation and delivery arrangements by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M302.251.C GTIN: 4054469115481 eClass: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 25–50 mm Resolution: 0.001 mm Resolution (inch): 0.00005 in Accuracy: 0.004 mm Weight: 0.9 kg Non-rotating spindle Ratchet stop Data output: RB 4.1 Special features Digital display with ON/OFF, ABS/INC, UNIT and SET keys Frame painted, measuring drum matt-chrome plated Compact format for small-part inspection Suitable for production and laboratory inspection FAQ What measurement range does the micrometer cover? The Digital disc micrometer ND 25–50 mm covers a measuring span from 25 to 50 mm, making it suitable for small shafts, rings and turned parts. How fine is the resolution and what accuracy can be expected? The instrument offers a resolution of 0.001 mm with an accuracy figure of 0.004 mm, providing fine incremental readings for tight tolerance checks. Can measurement data be exported to quality systems? Yes, the micrometer supports data output via RB 4.1, enabling direct integration with data collection devices or inspection software for validated logging. What features ensure repeatable measuring force? A built-in ratchet stop and a non-rotating spindle are incorporated to reduce operator-induced variation and deliver consistent measuring force. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Digital Groove Micrometer With Ratchet, 0.001mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement and reliable data capture for consistent groove inspection. Benefit from precise repeatability thanks to the built‑in ratchet and electronic readout, and order directly via Metav Werkzeuge or consult our specialists for application advice. Digital micrometer for groove measurement M302.122.C — 25–50 mm, 0.001 mm resolution (Metav IndustryLine) The Digital micrometer M302.122.C is a compact micrometer designed for accurate groove and slot measurement in fine‑mechanical and workshop environments Ratchet stop for reproducible measuring pressure Resolution 0.001 mm for sub-millimetre control RB 4.1 data output for digital documentation Compact 25–50 mm range for fine mechanical work Consistent sub‑millimetre precision for groove inspection The micrometer delivers a resolution of 0.001 mm combined with a stated accuracy of ±0.005 mm, which supports routine quality checks where tight tolerances are required. The integrated ratchet stop ensures a consistent measuring force, reducing operator‑induced variance, while the non‑rotating spindle protects delicate groove edges from damage. Those characteristics make the instrument especially suitable for repetitive groove measurement tasks in production and inspection stations, where repeatability and traceability shorten setup and verification times. Seamless digital handling and traceable results Equipped with a clear digital display and functional keys (ON/OFF, ABS/INC, UNIT, SET), the device speeds up readout and unit conversion without manual calculation. The RB 4.1 data output allows direct transfer of measurement values to data loggers or QC software, eliminating transcription errors and accelerating documentation. For workshops aiming to improve throughput and reduce paperwork, this combination supports faster inspection cycles and straightforward integration into existing measurement routines. Compact design with workshop‑friendly ergonomics Classified for the micro range (25–50 mm), the instrument balances reach and stiffness for small to medium components typical in precision engineering. The measuring faces (approx. 0.75×6.5 mm) and a 0.5 mm spindle pitch deliver stable support and fine adjustment when probing narrow grooves or slots. The compact form factor keeps handling simple on the shop floor while the digital readout and mechanical features together provide a robust tool for maintenance, toolroom, and small‑batch production environments. Contact Metav Werkzeuge today for tailored advice on the M302.122.C micrometer and to arrange supply or technical consultation — Metav Werkzeuge, Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M302.122.C GTIN: 4054469114682 ECLASS: 21170328 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 25–50 mm Display resolution: 0.001 mm (0.00005 in) Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Measuring faces: 0.75×6.5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT and SET RB 4.1 data output Ratchet stop Non‑rotating spindle Designed for groove measurement FAQ What measurement range does this micrometer cover? The micrometer covers a measuring range of 25–50 mm, making it suitable for small grooves and slot measurements in precision work. How precise is the instrument for quality control? The M302.122.C offers a resolution of 0.001 mm with a typical accuracy of ±0.005 mm, supporting reliable inspection tasks and repeatable results. Can measurement values be recorded electronically? Yes — the device includes an RB 4.1 data output and a digital readout (ON/OFF, ABS/INC, UNIT, SET) to transfer values directly to data collection systems. What design features help with repeatable measurements? Built‑in ratchet stop and a non‑rotating spindle provide consistent measuring force and protect groove edges, improving repeatability in repetitive checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com