Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25-50mm Outside Micrometer 0.01mm Resolution Left-Handed Ratchet, Matt Chrome Finish, DIN 863 - Metav IndustryLine
Benefit from the combination of fine resolution, a left‑hand ergonomic design and a ratchet stop for consistent measuring force — ideal for precision tasks in fine mechanics and workshop environments. Order the micrometer directly via Metav Werkzeuge or contact our consultants for application advice. Micrometer M304.529 — Left‑hand outside micrometer, 25–50 mm, 0.01 mm A Micrometer M304.529 designed for precise external measurements in fine‑mechanical, watchmaking and detailed workshop applications. Left‑hand version for ergonomic handling 0.01 mm graduation for fine resolution Ratchet stop for consistent measuring force Conforms to DIN 863 quality standard Precision where small tolerances matter This analogue outside micrometer offers a reading of 0.01 mm, enabling reliable measurement of small features where repeatability is essential. The instrument falls into the Micro classification (measuring range 25–50 mm), a size band tailored for extremely compact workpieces such as micromechanical parts and watch components. The fine graduation combined with the 0.5 mm spindle pitch ensures that each revolution advances the spindle predictably, supporting fast, accurate readings and reducing the need for repeated checks. Robust construction that supports repeatable results Built with a matt chrome‑plated measuring drum and hardened measuring faces, this micrometer is engineered for long‑term stability and minimal wear at contact points. The spindle diameter of 6.5 mm and the integrated ratchet stop deliver a controlled measuring force, which reduces operator‑induced variation and improves reproducibility. Compliance with DIN 863 provides an established reference for manufacturing and inspection environments, making the instrument suitable for consistent quality control routines. Ergonomics and workshop integration The left‑hand configuration suits specialised workflows and left‑hand operators, improving handling comfort during repetitive measurements. As an analogue instrument with classic nonius operation, it combines familiar handling with a fine 0.01 mm resolution that meets typical workshop and precision‑engineering requirements. Supplied as a ready‑to‑use measuring tool, the micrometer integrates into inspection benches and small‑batch production where compact, high‑precision checks are frequent. Metav’s approach to democratising precision guarantees reliable availability and expert advice from the Emmerich centre. Contact Metav Werkzeuge to discuss the M304.529 for specific applications or to arrange supply directly from our Emmerich facility Technical Data Article number: M304.529 GTIN: 4054469117102 ECLASS: 21170328 Facts Measuring range: 25–50 mm Resolution/graduation: 0.01 mm Spindle pitch: 0.5 mm per revolution Spindle diameter: 6.5 mm Type: Analogue outside micrometer Standard: DIN 863 Special features Left‑hand orientation Ratchet stop for constant measuring force Matt chrome‑plated measuring drum Hardened measuring faces Suitable for fine‑mechanical and watchmaking tasks FAQ What measuring range does this micrometer cover? The measuring range is 25–50 mm, placing the instrument in the Micro classification for compact, high‑precision work. Is the micrometer suitable for left‑hand operators? Yes, the M304.529 is a left‑hand version designed for improved ergonomics in left‑hand workflows. What is the smallest increment readable on the scale? The analogue graduation is 0.01 mm, offering fine resolution for precise external measurements. Does the instrument comply with recognised standards? The micrometer conforms to DIN 863, ensuring it meets established industry requirements for outside micrometers. What features help ensure repeatable measurements? A ratchet stop provides consistent measuring force and the hardened measuring faces reduce wear, both contributing to repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Outside Micrometer Screw With Friction Ratchet, Matt Chrome Sleeve, DIN 863, Supplied In Case - Metav IndustryLine
Take advantage of precise measurement control and a glare‑free thimble paired with a durable protective case for reliable workshop results; order the instrument directly via Metav Werkzeuge or contact our consultants for technical advice. Outside micrometer 25–50 mm — friction ratchet, matt‑chrome thimble (Metav IndustryLine) The Outside micrometer 25–50 mm — friction ratchet, matt‑chrome thimble (Metav IndustryLine) is a compact precision instrument for repeatable external measurements in fine mechanical and workshop environments. 25–50 mm measuring range Friction ratchet for repeatable measuring force Matt‑chrome thimble for reduced glare Supplied in protective storage case Accurate, repeatable readings for precision tasks The Outside micrometer 25–50 mm delivers measurement resolution of 0.01 mm, supported by a 0.5 mm spindle pitch that converts each thimble revolution into precise linear motion. Classified as a micro range instrument (suitable for fine mechanical work within the 10–100 mm band), it balances reach with torsional stiffness so short jaws remain stable during handling. The integrated friction ratchet standardises contact force, reducing operator‑dependent variation and improving reproducibility in routine inspection and workshop use. Designed for consistent workshop performance A matt‑chrome thimble reduces reflections and improves scale legibility under workshop lighting, while the robust measuring spindle (Ø 6.5 mm) maintains alignment during repeated use. The frame and spindle geometry conform to DIN 863, ensuring interchangeability with established inspection procedures. As an analogue instrument, the thimble provides immediate tactile feedback and fast readout, which is beneficial where quick decisions are needed on the shop floor without additional electronics. Practical protection and proven usability Delivery includes a durable protective case for safe transport and storage, preserving calibration and preventing impact damage during handling. The ratchet mechanism not only aids repeatability but also protects the spindle and workpiece from excessive force, extending service life and lowering maintenance needs. Supplied as a ready‑to‑use micrometer from Metav IndustryLine, the instrument integrates easily into workshop tool sets and inspection kits where dependable external measurements are required. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine micrometer into measurement routines or to request delivery options and product specifics Technical data SKU: M304.229 GTIN: 4054469116464 Standard: DIN 863 Tariff code: 90173000 Facts Measuring range: 25–50 mm Reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Analog instrument Special features Friction ratchet for consistent measuring force Matt‑chrome measuring thimble Supplied in a protective case Category: outside micrometer / micrometer for external measurements FAQ What accuracy can be expected from this micrometer? The micrometer offers a reading resolution of 0.01 mm and, with correct technique and the built‑in friction ratchet, provides dependable repeatability suitable for routine workshop and inspection tasks. Is the instrument compliant with common standards? Yes, the instrument is manufactured to comply with DIN 863, ensuring compatibility with standard inspection procedures and acceptance criteria. Does the delivery include a protective case? A protective storage case is included with delivery to protect the instrument during transport and storage. How does the friction ratchet improve measurements? The friction ratchet standardises the contact pressure between anvil and spindle, which reduces operator variation and protects the spindle and workpiece from excessive force. Can this micrometer be used for precision watch or micro parts? Classified in the micro range, it is well suited to fine mechanical work within the 10–100 mm band; however, for sub‑micron laboratory needs other specialised instruments may be preferable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Outside Micrometer With Offset Measuring Faces 0.01mm Resolution, Ø2mm/5mm Faces, Ratchet, Supplied In Case - Metav IndustryLine
The combination of high-resolution reading (0.01 mm), accuracy ±0.005 mm and hardened measuring faces delivers reproducible external measurements for precision work; the ratchet spindle further ensures constant measuring force for repeatable results. Order the M307.012 outside micrometer directly via Metav Werkzeuge or consult our specialists for specification advice. M307.012 Outside micrometer — 25–50 mm, 0.01 mm analogue (Metav IndustryLine) The M307.012 is an analogue outside micrometer engineered for precise external measurements in the 25–50 mm range, featuring offset, small-diameter measuring faces for narrow surfaces. Analogue reading with 0.01 mm graduation Accuracy ±0.005 mm for fine measurements Hardened measuring faces Ø 2 mm, 5 mm length Ratchet spindle for consistent measuring force Precision that reduces rework and inspection time This micrometer delivers a reading of 0.01 mm combined with an accuracy of ±0.005 mm, which makes it suitable for fine shop-floor measurement tasks where reproducibility matters. The spindle pitch of 0.5 mm per revolution allows controlled adjustment and fine approach to the workpiece, while the ratchet spindle limits human influence on measuring force—reducing scatter between measurements and lowering the need for repeated checks. Built to withstand everyday workshop use The frame is painted to resist corrosion and to stand up to regular handling, and the measuring faces are hardened for wear resistance. The faces measure Ø 2 mm and are 5 mm long, a geometry that permits reliable contact in restricted or recessed areas where larger anvils would not fit. These design choices provide longevity and dependable contact geometry for repeated use on shafts and small external features. Straightforward operation and reproducible results As an analogue instrument with mechanical vernier-style reading, the device requires no battery and offers immediate, tactile feedback during measurement. The ratchet mechanism enforces a defined measuring force so that each reading is comparable, while the finely pitched spindle ensures smooth advancement. The instrument is supplied as the workshop-ready M307.012 outside micrometer from Metav IndustryLine and integrates easily into existing inspection routines without additional electronics. For project-specific advice or to request the Metav IndustryLine M307.012 outside micrometer, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm compatibility with application requirements Technical data SKU: M307.012 GTIN: 4054469117256 Manufacturer: Metav IndustryLine Category: Micrometers (outside) Facts Measuring range: 25–50 mm Resolution: 0.01 mm Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Tariff code: 90173000 Special features Painted frame Hardened measuring faces Measuring faces Ø 2 mm, 5 mm long Ratchet spindle for defined measuring force Analogue mechanical reading Setting reference from 25–50 mm FAQ What measuring range does this instrument cover? The M307.012 outside micrometer covers a measuring range of 25–50 mm. How precise is the M307.012 outside micrometer? The instrument provides a resolution of 0.01 mm with an accuracy of ±0.005 mm for fine external measurements. Are the measuring faces suitable for narrow grooves or shafts? Yes. The measuring faces are hardened and have a diameter of 2 mm and a length of 5 mm, which helps when measuring narrow or recessed external features. How is consistent measuring force ensured during use? A ratchet spindle is fitted to the micrometer to apply a defined measuring force and reduce variability between readings. Does the micrometer require batteries or electronic components? No. This is an analogue outside micrometer with a mechanical readout and does not need batteries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Plate Anvil Micrometer Ø20mm Anvil, Ratchet Stop, Painted Frame, Matt Chrome Thimble - Metav IndustryLine
Take advantage of the precise ±0.004 mm repeatability and the user-friendly ratchet stop for consistent measurement force; the lacquered frame and matt‑chrome thimble ensure durability in daily workshop use. Order directly via Metav Werkzeuge or consult the Metav team for application advice and availability. Disc‑anvil micrometer ND 25–50 mm (M309.251) — Metav IndustryLine, 20 mm anvil, ratchet stop The Disc‑anvil micrometer ND 25–50 mm (M309.251) is a mechanical measuring instrument designed for reliable outside measurements in machining and quality control, combining a large Ø20 mm disc anvil with a matt‑chrome thimble and ratchet stop for repeatable results. 25–50 mm measurement range 20 mm disc anvil Accuracy ±0.004 mm Non‑rotating spindle design Ratchet stop for uniform force Consistent accuracy for inspection and production The micrometer delivers a verified accuracy of ±0.004 mm, making it suitable for precision checks on turned parts, gauges and finished components where tolerance control is critical. With a resolution of 0.01 mm on the analogue scale and a solid mechanical design, the instrument translates calibrated spindle movement into clear, repeatable measurements. This level of precision reduces scrap and rework by ensuring that measured values reflect the true dimension rather than operator variation. Durable construction for daily workshop use A lacquered frame provides corrosion protection while the matt‑chrome thimble resists wear and glare, supporting long service life in demanding environments. The non‑rotating spindle minimises marking and lateral play during contact with the workpiece, and the integrated ratchet stop ensures the same measuring force is applied every time. Together, these design choices mean the instrument keeps calibration longer and maintains dependable performance across repetitive inspection tasks. Simple mechanical operation with reliable handling Analogue operation keeps the tool straightforward and robust: the graduated thimble offers immediate feedback and requires no batteries, while the ratchet delivers tactile control of end‑stop force. The Ø20 mm disc anvil provides a stable contact surface for convex or flat profiles, improving contact reliability compared with smaller-point anvils. For workshop professionals and inspectors who prefer mechanical instruments, this tool combines familiar handling with industrial‑grade repeatability. Integration into workshop quality routines The instrument is positioned for use in machining shops, maintenance departments and small‑scale inspection benches, where straightforward tools that provide statistically reliable results are preferred. As part of the Metav IndustryLine, it benefits from Metav’s quality control and logistics: a transparent supply chain from Emmerich supports dependable replenishment and consistent tooling standards across multiple workstations. For procurement specialists, the micrometer represents a pragmatic balance of precision, robustness and everyday usability. Contact Metav Werkzeuge in Emmerich for tailored advice on the Metav IndustryLine micrometer M309.251 — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific measurement tasks. Technical data Article number: M309.251 GTIN: 4054469118703 ECLASS: 21170328 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 25–50 mm Resolution (reading): 0.01 mm Accuracy: ±0.004 mm Anvil diameter: Ø20 mm Weight: 0.6 kg Special features Lacquered frame Matt‑chrome measuring thimble Ratchet stop Non‑rotating spindle Analogue micrometer Category: micrometer (disc‑anvil type) FAQ What is the measuring range of this micrometer? The measuring range is 25–50 mm for the Disc‑anvil micrometer ND 25–50 mm (M309.251) from Metav IndustryLine. What accuracy and resolution can be expected? The instrument provides an accuracy of ±0.004 mm with an analogue reading resolution of 0.01 mm, suitable for routine workshop inspection. How does the ratchet stop improve measurements? The ratchet stop on the Metav IndustryLine micrometer M309.251 ensures a uniform measuring force, reducing variation caused by differing operator pressure. Is the spindle design important for surface protection? Yes, the non‑rotating spindle design minimises marking and lateral movement during contact, protecting delicate surfaces and improving repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Precision Dial Indicator Micrometer Digital Readout, Ø12mm Measuring Faces, IP65 - Microtech Metrology
The combination of digital measurement, robust IP65 protection and ±0.005 mm accuracy makes this instrument a reliable choice for precision inspection and repeatable workshop checks; order the item directly via Metav Werkzeuge or consult our technical advisors for further specification support. 25–50 mm Digital Micrometer with IP65 protection by Microtech Metrology The Digital Micrometer offers compact, high-resolution dimensional measurement for workshop and quality-control applications across mechanical engineering and small-part inspection. High accuracy: 0.005 mm Range 25–50 mm IP65 dust and splash protection Measuring faces Ø12 mm Reliable accuracy that reduces rework and speeds inspection The instrument delivers ±0.005 mm nominal accuracy combined with a digital display and 0.001 mm reading steps, enabling concise decision-making at the inspection bench. Such precision decreases the risk of out-of-tolerance assemblies and reduces rework cycles, which translates into measurable time and cost savings for production runs. The solid reading resolution together with the rated protection against dust and water ensures that measurements remain reliable even in busy shop-floor environments. Compact design for precise handling in tight spaces With a measuring span of 25–50 mm, this device sits in the compact category suited to fine mechanical work and routine dimensional control. The short frame and Ø12 mm measuring faces provide low twist and stable contact on small diameters or thin sections, supporting consistent measurements of components such as pins, small shafts and turned parts. The compact format keeps the instrument easy to manoeuvre and quick to operate for repetitive checks without compromising stiffness or readability. Built for harsh environments and dependable traceability Protected to IP65, the unit resists ingress of dust and splashing fluids, making it suitable for workshop floors where contamination or coolant exposure is possible. The robust construction and clear digital readout improve throughput in production and inspection loops by reducing ambiguous readings. As a digital measuring tool, it supports faster measurement cycles and fewer transcription errors compared with analogue alternatives, thereby strengthening quality-assurance routines and supplier acceptance protocols. Discuss specification details with Metav Werkzeuge for application advice or to secure supply of the Microtech Metrology digital micrometer with IP65 protection and ±0.005 mm accuracy Technical data SKU: 133800501 GTIN: 4061905458101 Manufacturer: Microtech Metrology ECLASS: 21170328 Numbers / Core technical data Measuring range: 25–50 mm Minimum range: 25 mm Maximum range: 50 mm Resolution (reading): 0.001 mm Accuracy: 0.005 mm Protection class: IP 65 Special features / Design Digital micrometer format Measuring faces diameter: Ø12 mm Category: compact/micro measuring range (suitable for fine mechanical work) Suitable for workshop and quality-control use FAQ What is the measuring range of this micrometer? The micrometer covers a measuring range of 25–50 mm and is presented as a compact, micro-range device for fine measurement tasks. How precise is the digital output and what is the resolution? Resolution is 0.001 mm with a stated accuracy of ±0.005 mm on the digital micrometer, supporting reliable pass/fail decisions in quality control. Is the instrument protected for shop-floor use? Yes; the unit carries an IP65 rating, providing protection against dust ingress and low-pressure water jets typical of workshop environments. Which types of measurements can be performed with this device? The micrometer is intended for external dimensional checks typical in mechanical workshops—measuring diameters, thicknesses and similar small features with stable, repeatable contact. Who manufactures this micrometer and how can additional data be obtained? Microtech Metrology manufactures the instrument; detailed technical requests can be addressed through Metav Werkzeuge for datasheets and application guidance. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Precision Micrometer With 20mm Anvils, Colour Touchscreen, Wireless/USB, IP65, ISO 17025 - Microtech Metrology
Take advantage of ISO 17025 traceability, high-resolution measurement and watertight protection for repeatable shop-floor results; order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Digital Micrometer 25–50 mm by Microtech Metrology — Colour touchscreen & Wireless/USB The digital micrometer is an outside micrometer designed for precise dimensional control of small components in workshop and laboratory environments. ISO 17025 calibrated with certificate included Colour 1.5" touchscreen readout Wireless and USB data output IP65 protection against dust and water Precision and traceability that reduce rework This instrument delivers a resolution of 0.0001 mm and an effective accuracy of ±0.003 mm, providing the numerical certainty required for critical quality decisions. The combination of a stable 20 mm anvil and a non-rotating spindle minimises measurement artefacts, while the integrated friction ratchet guarantees reproducible measuring force. Supplied fully calibrated to ISO 17025 with a calibration certificate, the micrometer offers traceability for audits and reduces the risk of returned parts or costly rework. Fast, error-free data transfer into quality workflows Equipped with Wireless and USB outputs and a colour 1.5" touchscreen, the instrument removes manual transcription and speeds data capture into inspection software or SPC systems. The digital readout, combined with solid data interfaces, shortens inspection cycles and supports seamless integration into existing measurement processes. IP65 protection ensures reliable operation even in harsher shop-floor conditions, maintaining measurement integrity and uptime. Built for everyday workshop use with lab-grade results Rugged construction and practical ergonomics make this tool suitable for production benches and bench-mounted inspection stations alike. The larger 20 mm measuring faces distribute contact pressure for stable readings on small parts, and the friction ratchet prevents over-force in repetitive tasks. The device is digital for ease of use yet engineered for durability, balancing laboratory-grade performance with the robustness expected in industrial environments. If clarification of compatibility or data formats is required, Metav’s technical team can advise on integration and workflows. Contact Metav Werkzeuge today for expert advice on Microtech Metrology’s ISO 17025‑calibrated micrometers and to arrange rapid supply from our Emmerich warehouse. Technical data SKU: 110780508 GTIN: 4061905041365 Eclass: 21170328 ETIM: EC003590 Brand: Microtech Metrology Facts Measuring range: 25–50 mm Resolution (reading): 0.0001 mm Accuracy: ±0.003 mm Display: Colour 1.5" touchscreen Data output: Wireless, USB Protection class: IP65 Measuring faces: Anvils Ø20 mm ISO 17025 calibration: Calibration certificate included Special features Digital instrument Friction ratchet for consistent measuring force Non-rotating spindle for accurate readings Wireless and USB connectivity for data capture FAQ Is the micrometer supplied pre-calibrated? Yes. The Microtech Metrology digital micrometer (SKU 110780508) is supplied fully calibrated to ISO 17025 and includes a calibration certificate. What accuracy and resolution can be expected? The device offers a resolution of 0.0001 mm and an accuracy of ±0.003 mm, suitable for high‑precision shop-floor and laboratory measurements. Can measurement data be exported directly to inspection software? Yes. Data output is available via Wireless and USB, enabling direct capture into SPC or measurement-collection systems. Is the instrument suitable for use at the workbench? With IP65 protection, a robust build and a friction ratchet for repeatable force, the micrometer is designed for routine workshop use while delivering lab-grade results. What are the measuring faces and why do they matter? The instrument features 20 mm flat anvils that provide a stable contact area for small components, reducing local deformation and improving measurement repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Precision Micrometer With 35mm Measuring Faces, Touchscreen Readout, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a combination of precise ISO 17025 calibration, 0.004 mm measurement accuracy and integrated Wireless + USB data transfer to streamline inspection and documentation. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Micrometer (25–50 mm) — 35 mm disc faces & Touchscreen (Microtech Metrology) A Micrometer (25–50 mm) by Microtech Metrology for high-precision external measurements with a compact touchscreen and modern data outputs. ISO 17025-calibrated delivery Wireless and USB data output 0.004 mm measurement accuracy Large Ø35 mm disc measuring faces Precision that improves inspection throughput The instrument delivers repeatable results thanks to 0.004 mm declared accuracy and an available reading resolution of 0.0001 mm, making it suitable for demanding production checks and laboratory tasks. Supplied fully ISO 17025-calibrated with a traceable calibration certificate, this device reduces uncertainty in acceptance testing and audit trails. The sizable Ø35 mm disc measuring faces provide a stable contact area for shafts and large contact surfaces, while the non-rotating spindle improves the consistency of the contact point and minimises surface marking during measurement. Faster documentation with modern connectivity Equipped with both Wireless and USB data outputs and a Touchscreen 1.54" digital display, the instrument simplifies logging and integration with quality-management software. Direct electronic transfer cuts transcription errors and accelerates statistical process control loops; measured values can be collected centrally without manual re-entry. The digital interface offers immediate readout and straightforward mode selection, supporting efficient batch inspection and reducing overall throughput time on the shop floor. Robust design for workshop and lab environments Designed for daily use, the device combines a compact form with practical features that support reliable handling and repeatable contact pressure control. The large disc faces spread contact forces and reduce local indentation on softer parts, while the non-rotating spindle maintains stable positioning during repeated measurements. Delivered with an official ISO 17025 calibration certificate, the micrometer arrives ready for inclusion in quality systems and internal procedures. As a supplier, Metav Werkzeuge provides an additional layer of supply-chain confidence, ensuring consistent availability and advice for integration into existing inspection routines. Contact Metav Werkzeuge today for expert support and to secure the Microtech Metrology micrometer with ISO 17025 calibration and secure data transfer for reliable quality workflows Technical data Article number: 110780507 GTIN: 4061905457449 Manufacturer: Microtech Metrology Digital display: Touchscreen 1.54" Data output: Wireless + USB ISO 17025 calibration: included Facts Measuring range: 25–50 mm Reading resolution: 0.0001 mm Accuracy: 0.004 mm Special features Measuring faces: Teller Ø35mm Non-rotating spindle Digital instrument Wireless and USB connectivity Supplied with calibration certificate (ISO 17025) FAQ Does the micrometer arrive calibrated? Yes. The Microtech Metrology micrometer is delivered fully calibrated and includes an ISO 17025 calibration certificate. How are measurements exported from the device? Measured values can be exported via Wireless connection or through the USB port to inspection software or data loggers. What size of parts is the instrument best suited to? With Ø35 mm disc faces and a 25–50 mm range, the instrument is well suited to shafts, bearings and medium-sized turned components. Is the spindle rotating during measurement? No. The device features a non-rotating spindle to improve contact stability and reduce surface marking on delicate parts. Which display does the instrument use? The instrument uses a 1.54" touchscreen for fast, intuitive readout and mode selection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Small-Tip Digital Micrometer, 2mm Anvils, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of laboratory-grade traceability and rugged workshop protection for reliable small-feature measurement; the included ISO 17025 calibration certificate and IP65-rated aluminium housing ensure immediate use and long-term stability. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. CertiMet Small-Tip Digital Micrometer — 25–50 mm, 2 mm anvils (Microtech Metrology) The CertiMet Small-Tip Digital Micrometer is a precision outside micrometer for fine mechanical and watchmaking tasks, offering a 25–50 mm measuring range with small Ø2 mm measuring faces for detailed work. IP65 aluminium housing for workshop use Small Ø2 mm measuring anvils for fine details ISO 17025 calibration certificate included 0.001 mm resolution with ±0.004 mm accuracy Precision where components are smallest The instrument delivers repeatable results for small-diameter features thanks to its small 2 mm anvils and fine-resolution electronics. With a display step of 0.001 mm and a documented accuracy of ±0.004 mm, the device provides the numerical certainty required for quality control in microfabrication and precision assembly. The friction thimble and rotating spindle help to maintain consistent measuring force and alignment, reducing operator-induced scatter and allowing shorter cycle times for batch checking without compromising traceability. Built to survive regular workshop use A robust aluminium housing combined with an IP65 ingress rating protects the measuring head from coolant sprays and dust, making the micrometer suitable for machine‑shop environments as well as clean benches. The compact form factor and small anvils are especially advantageous when measuring grooves, pins or internal shoulders where access is limited. The mechanical design, featuring a friction ratchet, ensures reproducible contact pressure and protects delicate measuring faces during repetitive use, which reduces rework and inspection time. Documented calibration and practical integration The instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), enabling immediate inclusion in accredited quality systems and supporting audit trails without additional lab visits. Digital functions such as mm/inch switching, origin setting and a hold function simplify data collection, while the clear ON/ABS/SET/HOLD display layout reduces transcription errors. For workshops seeking fast, traceable checks of fine parts, this micrometer bridges bench convenience with formal measurement assurance. Request the Microtech Metrology CertiMet from Metav Werkzeuge for ISO 17025‑calibrated precision and local application support — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific tasks Technical data SKU: 110650501 GTIN: 4061905040283 Manufacturer: Microtech Metrology Facts Measuring range: 25–50 mm Resolution: 0.001 mm Accuracy: ±0.004 mm Measuring faces: small Ø2 mm Special features IP65 protection Aluminium housing Friction thimble (ratchet) Rotating measuring spindle Digital display with ON/ABS/SET/HOLD and mm/inch ISO 17025 calibration certificate (Ilac MRA) FAQ Is a calibration certificate included with the micrometer? The CertiMet small‑tip digital micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), enabling immediate use in accredited workflows. Are the measuring faces suitable for very small features? Yes, the instrument uses small Ø2 mm anvils that are designed for fine details such as pins, grooves and watch components. Can the device be used at the machine or in the workshop? The IP65 aluminium housing provides protection against dust and splashes, making the micrometer suitable for routine workshop use as well as laboratory checks. What accuracy and display resolution does it offer? The micrometer provides a display resolution of 0.001 mm and an accuracy of ±0.004 mm, suitable for high‑precision verification tasks. Does the micrometer include features to reduce operator error? Yes, the friction thimble and rotating spindle help to standardise measuring force and alignment; the digital hold and origin functions further reduce transcription and setup errors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Thread Micrometer With 25mm Setting Gauge 60° In Wooden Case - Metav IndustryLine
Take advantage of the combination of compact measuring range, high repeatability and robust handling for reliable thread inspection in routine quality checks. Order the instrument directly via Metav Werkzeuge or contact the consultants for application advice. Metav IndustryLine Thread Micrometer M309.092 – 25–50 mm, 0.008 mm accuracy Metav IndustryLine Thread Micrometer M309.092 is a precision instrument for measuring external threads within a compact 25–50 mm range, supplied with a 25 mm 60° setting gauge. Thread micrometer 25–50 mm measuring range Accuracy 0.008 mm for precise checks Non-rotating spindle for stable readings Incl. 25 mm 60° setting gauge and case Measure thread form with repeatable accuracy The compact design focuses on consistent, reproducible inspections of external threads across small to medium components. With a stated accuracy of 0.008 mm and a clear 25–50 mm range, the instrument reduces sorting errors and supports fast pass/fail decisions on the shop floor. The specification for analog measurement with a fine vernier scale gives immediate, tactile feedback; this is beneficial where rapid visual validation is required and where digital integration is not necessary. The result is fewer measurement cycles and more predictable quality outcomes. Stable readings through controlled contact and solid mechanics A non-rotating spindle and a 6.5 mm spindle diameter provide a stable contact geometry that limits measurement scatter from spindle backlash or uncontrolled rotation. The fixed contact movement helps maintain the thread form orientation during measurement, so readings remain consistent between operators. At a weight of 0.6 kg the tool balances robust construction with practical handling, easing repetitive use without unnecessary fatigue. Supplied in a protective case, the instrument is protected during transport and storage, preserving calibration and mechanical integrity. Ready for direct use in inspection and setting tasks The micrometer is supplied incl. 25 mm 60° setting gauge, enabling quick verification of the measuring faces before use and simplifying setup in multi-step inspection routines. This accessory supports traceable checks of zero position and ensures that the instrument’s calibration state can be confirmed on the bench. Delivered as a complete package from Metav IndustryLine, the unit is aimed at users who require a compact, workshop-ready measuring solution that integrates easily into established quality workflows. For dependable thread measurement in confined ranges, contact Metav Werkzeuge to secure the Metav IndustryLine thread micrometer M309.092 with 0.008 mm accuracy and supplied setting gauge; Metav Werkzeuge in Emmerich can advise on delivery and technical fit – info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: M309.092 GTIN: 4054469118178 Label: Gewinde-Mikrometer, 25 - 50mm inkl. Einstellmaß 25 mm 60° Manufacturer: Metav IndustryLine Facts Measuring range: 25–50 mm Accuracy: 0.008 mm Resolution (reading): 0.01 mm Spindle diameter: 6.5 mm Weight: 0.6 kg Tariff number: 90173000 Special features Non-rotating spindle Includes 25 mm 60° setting gauge Delivered in case (for transport) Analog mechanical instrument Category: Micrometers (Messschrauben) FAQ Is this micrometer suitable for verifying external thread diameters in production? Yes. The Metav IndustryLine thread micrometer M309.092 is designed for routine verification of external threads within the 25–50 mm range and provides high repeatability for production checks. What measurement accuracy and resolution can be expected? The instrument specifies an accuracy of 0.008 mm and a reading resolution of 0.01 mm, which supports tight inspection requirements for small and medium workpieces. Does the spindle rotate during measurement? No. The micrometer features a non-rotating spindle to preserve thread orientation and improve stability of readings. Is a setting gauge included and how is the tool delivered? A 25 mm 60° setting gauge is included and the micrometer is supplied in a protective case to safeguard the instrument during transport and storage. How should the micrometer be handled to ensure consistent results? Handle with firm, even contact and use the included setting gauge to check zero before critical measurements; store the instrument in its case when not in use to maintain mechanical integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Tolerance Bore Gauge With Digital Fine Indicator, IP54 - Filetta
Take advantage of a precision digital micrometer that combines high resolution (0.001 mm), robust IP54 protection and an accuracy of ±0.005 mm for repeatable external measurements; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Filetta Tolerance Outside Micrometer MS910.503 — Digital readout, 25–50 mm The Filetta Tolerance Outside Micrometer MS910.503 is a workshop‑grade external micrometer with a fine digital readout, designed for precise dimensional checks in mechanical engineering and quality control. Digital display mm/inch with on/off Accuracy ±0.005 mm Measuring range 25–50 mm IP54 protection rating Precise measurements with clear digital feedback The micrometer delivers a resolution of 0.001 mm, shown on a clear digital display with selectable mm/inch units and a dedicated on/off function. This combination reduces read-off errors and speeds up routine inspections, making dimensional checks more efficient in production and workshop environments. The fine digital readout supports tolerance work by giving immediate, unambiguous values, while the defined measuring force of 5–10 N helps to standardise contact pressure and improve repeatability across operators. Built for everyday workshop use and protection Engineered to withstand shop conditions, the instrument carries an IP54 protection rating, which guards against dust ingress and splash water during normal workshop use. The rechargeable lithium battery ensures continuous operation without repeated cell changes, supporting longer measurement sessions and fewer interruptions. The solid measuring faces (Ø6.5 mm) and the robust spindle geometry maintain alignment during repeated external measurements, translating into reliable results for inspection benches and assembly control. Practical features that speed up quality workflows Included with the micrometer is an adjustment standard to verify zero and to recalibrate quickly on the bench, reducing downtime during shift changes. The compact 25–50 mm measuring range sits within the practical span for many external diameter checks in component manufacture, offering a balance of reach and rigidity. Combined with the micrometer’s ±0.005 mm accuracy, this tool is well suited to routine tolerance checks, incoming part inspections and set‑up verification where consistent, fast readings are required. Contact Metav Werkzeuge for application guidance or to request the Filetta MS910.503 for your inspection tasks; Metav’s Emmerich facility provides a European quality filter and expert advice to ensure the right measuring solution for every workshop. Technical Data Article number: MS910.503 Brand: Filetta Product: Tolerance outside micrometer Measuring range: 25–50 mm Accuracy: ±0.005 mm Resolution: 0.001 mm Protection class: IP54 Core specifications Measuring range min: 25 mm Measuring range max: 50 mm Measuring faces diameter: Ø6.5 mm Measuring force: 5–10 N Display: Digital mm/inch with on/off Battery: Lithium, rechargeable Special features Adjustment standard included Digital fine readout for tolerance checks Robust spindle geometry for repeatable contact Suitable for workshop and quality control environments FAQ What is the measuring range of this micrometer? The micrometer covers a 25–50 mm measuring range, suitable for common external diameter checks. What resolution and accuracy does the instrument provide? The device offers a resolution of 0.001 mm and an accuracy of ±0.005 mm, making it appropriate for precise tolerance inspections. Is the display changeable between mm and inches? Yes, the digital display supports selectable mm/inch units via the on‑device control. How is the tool powered and maintained? Power is supplied by a rechargeable lithium battery; the design supports extended use with fewer interruptions compared with disposable cells. Does the micrometer include anything for adjustment or zeroing? An adjustment standard is included to verify and reset the zero position quickly on the bench. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
25-50mm Tube Wall Thickness Micrometer Colour Touchscreen, Wireless/USB, IP65, ISO 17025 Calibrated - Microtech Metrology
Reliable, ISO 17025‑calibrated measurement with ±0.002 mm accuracy, robust IP65 protection and Wireless+USB data transfer delivers traceable tube wall inspection ready for immediate use; order via Metav Werkzeuge or consult our specialists for implementation advice. Tube Wall Thickness Micrometer — Microtech Metrology, ±0.002 mm accuracy, ISO 17025 calibrated The Tube Wall Thickness Micrometer is a digital micrometer designed for precise inspection of tube wall thickness in fabrication and quality control, covering a measuring range of 25–50 mm and suited to routine industrial checks. ISO 17025 calibrated with certificate ±0.002 mm measurement accuracy Wireless+USB data transfer for digital logging IP65 protection and ratchet stop for consistent contact Precision that reduces rework and speeds inspection The Microtech instrument combines a measured ±0.002 mm reproducibility with a finely tuned contact mechanism to reduce user‑induced variation. The built‑in ratchet stop and rotating spindle ensure consistent seating pressure, which is critical when inspecting thin tube walls; together these features provide traceable measurements that stand up to audit. The included calibration certificate issued under ISO 17025 confirms conformity to recognised laboratory standards and allows immediate use in accredited quality processes. Seamless data capture to integrate with existing systems Workflows benefit from the unit’s Wireless+USB connectivity and a bright 2.4" touchscreen that shows readings clearly at the point of inspection. Data can be transferred as HID or USB to common operating systems for direct logging into SPC or inspection software, cutting manual transcription and enabling faster decision cycles on the shop floor. The digital display and persistent data output support reproducible documentation and simplify batch traceability for production runs. Built for shop‑floor conditions and tube inspection tasks With an ingress protection rating of IP65, the housing resists dust and jetting water typical in industrial environments, while the compact measuring heads are optimised for tube geometry. The instrument covers a 25–50 mm measuring range and is specified for tube wall thickness measurements from 4.7 mm, making it suitable for a wide variety of industrial tubing and pipework checks. Robust construction and simple maintenance reduce downtime, and the combination of a tactile ratchet with digital readout balances operator comfort with measurement reliability. Contact Metav Werkzeuge today for technical consultation or to arrange procurement of Microtech Metrology measurement solutions directly from Emmerich. Technical Data Article number: 110350508 GTIN: 4061905040856 Producer: Microtech Metrology Category: Micrometers (Messschrauben) Core specifications Measuring range: 25–50 mm Indication/display: Colour 2.4" touchscreen Reading increment: 0.0001 mm Accuracy: ±0.002 mm Protection rating: IP65 Features & functions Data output: Wireless + USB Friction/ratchet stop for repeatable contact Rotating spindle for stable measurement ISO 17025 calibration certificate included Suitable for tube wall thickness measurements from 4.7 mm Digital instrument for direct electronic logging FAQ How accurate is the Tube Wall Thickness Micrometer for routine inspections? The Microtech Tube Wall Thickness Micrometer (Microtech Metrology, SKU 110350508) delivers an accuracy of ±0.002 mm, making it suitable for standard industrial quality control and traceable inspection records. Does the instrument come calibrated and with documentation? Yes, the micrometer is supplied fully calibrated with an ISO 17025 calibration certificate included, ensuring the results from Microtech Metrology's micrometer are immediately traceable. Can measurement data be exported to inspection software? The device supports Wireless+USB transfer and HID‑compatible data output, allowing direct transfer from the micrometer (Microtech Metrology, SKU 110350508) into common SPC and metrology applications. Is the micrometer suitable for use in wet or dusty production areas? With an IP65 rating and rugged construction, the micrometer from Microtech Metrology (SKU 110350508) is designed to withstand dust and water jets commonly encountered on the shop floor. What tube sizes can be measured with this micrometer? The instrument covers a measuring range of 25–50 mm and is specified for tube wall thickness measurements from 4.7 mm, making it appropriate for many industrial tubing applications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Tube Wall Thickness Micrometer Digital Friction Thimble, IP65, ISO 17025 Calibrated - Microtech Metrology
Benefit from sub‑millimetre accuracy, robust IP65 protection and an ISO 17025 calibration certificate for immediate use in quality assurance; order the tube wall thickness micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech CertiMet TUBE – digital tube wall thickness micrometer (IP65, 25–50 mm) The Microtech CertiMet TUBE is a purpose‑built digital micrometer for precise measurement of tube wall thickness in production, inspection and laboratory settings. IP65 aluminium housing for workshop environments 0.001 mm resolution with ±0.003 mm accuracy Friction thimble for reproducible measurement force Functions: mm/inch, origin and data hold Delivered with ISO 17025 calibration certificate Precise measurement where repeatability matters Built for traceable quality control, this micrometer offers a resolution of 0.001 mm and an accuracy of ±0.003 mm, delivering consistently measurable differences across production runs. The specified measuring range (25–50 mm) covers typical tube diameters while enabling wall‑thickness checks from 4.7 mm upwards. A rotating measuring spindle combined with a calibrated friction thimble reduces operator‑induced variability, so every reading is comparable and reproducible — a key requirement for inline inspection and final acceptance tests. Robust construction for the shop floor and laboratory The instrument combines a protective IP65 aluminium housing with workshop‑grade mechanical features to resist dust and coolant exposure. The friction thimble ensures a constant contact force, improving repeatability when multiple operators perform inspections. The rotating spindle design reduces wear on the anvils and stabilises contact during measurement. For specialised profiles, a custom tube anvil can be supplied on request to adapt the tool to non‑standard tubing without compromising measurement integrity. Digital functions and calibration for audit‑ready workflows Equipped with digital readout functions — mm/inch, origin and hold — the micrometer supports quick unit switching and secure capture of critical values. Each unit is supplied with an ISO 17025 calibration certificate (Ilac MRA), providing full traceability and documentation suitable for internal audits and customer reporting. The combination of fine resolution, documented calibration and workshop protection makes this instrument appropriate for fabrication shops, tube manufacturers and metrology laboratories that require audited measurement evidence. Request tailored guidance from Metav Werkzeuge for integration, calibration evidence and application advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 110350501 GTIN: 4061905040542 Manufacturer: Microtech Metrology Facts Measuring range: 25–50 mm Resolution: 0.001 mm Accuracy: ±0.003 mm IP protection: IP65 Special features Digital display with mm/inch, origin and hold Friction thimble, rotating spindle Aluminium housing Custom tube anvil on request Calibration: ISO 17025 certificate included (Ilac MRA) FAQ Is the micrometer delivered calibrated? Yes. The Microtech CertiMet TUBE is supplied fully calibrated with an ISO 17025 calibration certificate (Ilac MRA) for immediate use in audited quality processes. What resolution and accuracy can be expected? The instrument provides a resolution of 0.001 mm and an accuracy of ±0.003 mm, suitable for demanding production and inspection tasks. Can this device measure tube wall thickness directly? Yes. The micrometer is configured for tube wall thickness measurement and covers wall thicknesses from 4.7 mm within the 25–50 mm measuring range. Is the design suitable for workshop conditions? The aluminium housing with IP65 protection and a friction thimble offers robust resistance to dust and coolant and ensures reproducible contact force in the workshop. Are customised anvils available for non‑standard tubes? Custom tube anvils can be supplied on request to adapt the measuring faces to specific profiles or bore geometries. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25-50mm Uni Micrometer 0.01mm Resolution Adjustable Anvil, Ratchet Stop, 7 Insert Pairs, Wooden/Plastic Case - Metav IndustryLine
Take advantage of the micrometer’s 0.01 mm graduation and the flexibility of a movable anvil combined with seven interchangeable measuring inserts for precise, repeatable checks in fine mechanical production. Supplied in a protective transport case and built to factory standard, the instrument supports reliable workshop workflows; order directly via Metav Werkzeuge or consult our specialists for specification advice. Uni. micrometer M309.171 — 25–50 mm, 0.01 mm graduation (Metav IndustryLine) The Uni. micrometer is a compact, high-precision measuring instrument for workshop and fine‑mechanical dimension checks across a 25–50 mm range, offering adaptability via a movable anvil and multiple measuring inserts. 0.01 mm graduation Movable anvil for flexible use Seven interchangeable measuring inserts Supplied in protective transport case Precise readings for fine mechanical work The instrument delivers a 0.01 mm graduation on an analogue drum, which places it firmly within the micro category for micrometres (suitable for delicate tasks between 25 and 50 mm). The combination of fine graduation and a movable anvil gives technicians the ability to adapt contact geometry to small or awkward parts without compromising resolution. For quality-controlled production the result is fewer reworks and a measurable improvement in first‑pass yield, as checks can be integrated quickly into standard setups with minimal handling time. The inclusion of seven pairs of measuring inserts extends the range of contact profiles available, reducing the need for additional instruments. Built for repeatability and easy handling Durability and consistency are supported by a matt‑chrome measurement drum and a 6.5 mm measurement spindle, which rotates smoothly to ensure stable contact. A built-in ratchet creates a defined measuring torque that reduces operator‑dependent variation and protects delicate workpieces; this simple mechanical control aids reproducible readings across shifts. The instrument’s solid feel and balanced mass (approx. 0.8 kg) help to stabilise the device during measurement, while the analogue format provides a direct, power‑free readout that is resilient in workshop environments. Practical application and workflow benefits Designed for routine use in machine shops, toolrooms and precision assembly, the micrometre is particularly suited to tasks that demand compact reach and exact results—such as small housing dimensions, shafts and fitted components. The delivery includes a protective transport case to safeguard the instrument between uses and during storage, and the device is supplied to factory standard to simplify incoming inspection. Where a concise, mechanically robust measuring tool is required, this micrometre reduces setup complexity and integrates into existing quality procedures without the need for electronic interfaces. Contact Metav Werkzeuge for tailored technical advice and parts selection—Metav Werkzeuge in Emmerich provides direct supply, specification support and reliable delivery for precision measuring instruments like this micrometer Technical data Article number: M309.171 GTIN: 4054469118482 Category: Micrometers Numbers / Core technical data Measuring range: 25–50 mm Resolution / Graduation: 0.01 mm Measuring spindle diameter: 6.5 mm Weight: 0.8 kg Special features Analogue mechanical display Movable anvil Seven pairs of measuring inserts included Ratchet for constant measuring force Measurement drum matt chrome‑plated Factory standard (Werksnorm) Protective transport case supplied Measuring spindle rotates FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 25–50 mm, which is ideal for compact, high‑precision workshop checks. What resolution and repeatability can be expected? Resolution is 0.01 mm on the analogue drum; combined with the ratchet this supports consistent repeatability for standard workshop control. Are exchangeable contact tips included? Yes—the delivery includes seven pairs of measuring inserts, enabling different contact geometries for a wider range of measurements. Is the instrument supplied ready for use? The micrometer is supplied to factory standard and delivered in a protective transport case; bench verification is recommended as part of shop procedures. Which applications suit this micrometer? Typical uses include small component inspection, shaft and housing checks, and precision assembly tasks in machine shops and toolrooms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Universal Micrometer With 7 Exchangeable Measuring Tips, Setting Gauge, Friction Ratchet, Supplied In Case - Metav IndustryLine
Benefit from precise, repeatable measurements thanks to 0.008 mm accuracy, a non-rotating 6.5 mm spindle and a friction ratchet that stabilises measuring force; order the instrument from Metav Werkzeuge or contact their consultants for tailored specification advice. Metav IndustryLine Universal Micrometer M309.081 – 25–50 mm, 7 interchangeable measuring inserts, friction ratchet The Metav IndustryLine Universal Micrometer M309.081 is a mechanical micrometer for fine workshop and inspection tasks, offering a compact measuring range suited to precision components. Range 25–50 mm for medium-range measurements Seven pairs of interchangeable measuring inserts Friction ratchet for consistent measuring pressure Non-rotating 6.5 mm spindle, accuracy 0.008 mm Precise readings for delicate components and small assemblies The instrument delivers high measuring stability through its friction ratchet and a non-rotating spindle, which together reduce operator-induced variation. Designed as an analogue micrometer, it achieves an accuracy of 0.008 mm, making it suitable for detailed mechanical work where reproducibility matters. Classified within the micro measurement group (measuring range up to 100 mm), this tool supports tasks in watchmaking, precision fixtures and small-series component inspection by combining a short, stiff frame with controlled measuring force. The result is fewer re-measurements and a smoother inspection workflow. Adaptable measuring faces for diverse inspection tasks Interchangeable measuring inserts provide flexibility when faced with varied geometries. Supplied with seven pairs of special measuring inserts and an adjustment gauge, the micrometer adapts quickly to external diameters, grooves or stepped profiles without compromising contact stability. The modular concept shortens set-up time and reduces the need for multiple dedicated instruments, which supports efficient production runs and quicker changeovers in small-batch manufacturing. The matt-chrome measuring drum and painted frame ensure clear scale reading and robust wear resistance. Built for everyday workshop reliability and traceable standards As a mechanical tool produced to factory standard (Werksnorm), the micrometer emphasises longevity and straightforward maintenance. The analogue design avoids electronic vulnerability in harsher shop-floor environments while providing tactile feedback preferred by many technicians. With a compact 25–50 mm range and a manageable weight of 0.7 kg, the instrument is easy to handle for one-person operation and fits into established inspection routines. Clear material choice—painted frame and matt chrome measuring drum—supports durability and simple cleaning, maintaining measurement quality over time. Contact Metav Werkzeuge for ordering guidance on the Metav IndustryLine micrometer and for help matching the instrument to specific inspection needs—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.081 GTIN: 4054469117799 Tariff number: 90173000 Label: Uni.-Mikrometer, 25 - 50 mm, 7 Einsätze, Einstellmaß Numbers / Core technical data Measuring range: 25–50 mm Accuracy: 0.008 mm Spindle diameter: 6.5 mm Weight: 0.7 kg Special features Analogue micrometer (mechanical) Non-rotating measuring spindle Friction ratchet Supplied with seven pairs of special measuring inserts and setting gauge Frame painted; measuring drum matt chrome Factory standard (Werksnorm) FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 25–50 mm and is designed for precise medium-range measurements suitable for small components. How accurate is the instrument for quality control tasks? With an accuracy of 0.008 mm, the Metav IndustryLine universal micrometer M309.081 provides the precision required for many workshop and inspection applications. Are interchangeable measuring faces included, and what is their purpose? Yes, the micrometer is supplied with seven pairs of special measuring inserts to adapt contact geometry for different profiles and improve measurement versatility. Is the spindle design suited to repeatable readings? The instrument features a non-rotating 6.5 mm spindle and a friction ratchet, both of which contribute to repeatable contact pressure and consistent readings. What standard does the product adhere to for production quality? The micrometer is manufactured to factory standard (Werksnorm) and built as an analogue instrument intended for robust workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-50mm Wireless Digital Micrometer With 2.4" Colour Touchscreen, Non‑Rotating Spindle, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high reproducibility, a 25–50 mm measuring range and integrated wireless and USB data output for efficient quality control; the instrument arrives with an ISO 17025 calibration certificate, ensuring traceability and immediate use—order the calibrated unit via Metav Werkzeuge or contact the consultants for integration advice. Micrometer 25–50 mm — Digital micrometer with 2.4-inch colour touchscreen (Microtech Metrology) The Micrometer 25–50 mm is a high-precision digital measuring instrument for workshop and laboratory tasks, combining a fine 0.003 mm accuracy with convenient data transfer and a non-rotating spindle for sensitive surface measurements. High accuracy ±0.003 mm 2.4-inch colour touchscreen Wireless and USB data output ISO 17025 calibration certificate included Precision that supports reliable production decisions This measuring instrument delivers accuracy of ±0.003 mm, which translates into consistently reproducible results in statistical process control and component inspection. The 25–50 mm measuring range places the gauge in the micro category for compact, high-precision tasks; that combination of range and stiffness suits fine mechanical parts where tight tolerances matter. The fixed, non-rotating spindle reduces surface marking and alignment error, so measurement uncertainty is lowered and downstream rework is minimised. Digital handling for faster quality documentation With a 2.4-inch colour touchscreen and combined wireless plus USB data interfaces, the unit integrates with data-collection workflows to reduce manual transcription and accelerate reporting. The clear display shortens read-off time, while the digital outputs enable direct capture into inspection software or spreadsheets, increasing throughput in incoming goods inspection or during batch sampling. The high-resolution readout of 0.0001 mm supports fine adjustment steps without sacrificing operator ease. Built for demanding measurement routines Mechanical design focuses on stable, repeatable results during repetitive use: the instrument’s construction and interface reduce handling variation and support fast, one-person operation. The result is a tool that eases daily measurement chores while maintaining laboratory-grade performance. The device’s features favour quality engineers and machinists who need reliable data capture combined with practical ergonomics on the bench. Traceable calibration and what is supplied This micrometer is delivered fully calibrated to ISO 17025, with the official calibration certificate included to document traceability for audits and quality records. The calibration status means the instrument can be placed immediately into control plans. Note that the anvil with ball is not included; this detail should be considered if measuring specialised curved profiles. Contact Metav Werkzeuge for specialist advice on connecting this Microtech micrometer to existing inspection systems or to request the ISO 17025-calibrated unit with certificate (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 110740508 GTIN: 4061905457104 Manufacturer: Microtech Metrology Facts Measuring range: 25–50 mm Resolution: 0.0001 mm Accuracy: ±0.003 mm Special features 2.4-inch colour touchscreen display Wireless and USB data output Non-rotating spindle Delivered calibrated to ISO 17025 with certificate Anvil with ball not included FAQ What level of accuracy can be expected from this instrument? The micrometer from Microtech Metrology achieves an accuracy of ±0.003 mm, suitable for precision inspection and tight-tolerance production checks; the technical sheet and the ISO 17025 certificate document this performance. Is a calibration certificate included with delivery? Yes, the instrument is supplied fully calibrated to ISO 17025 and the calibration certificate is included with the delivery for traceability and audit purposes. How can measurement data be transferred to a PC or inspection system? Data transfer is possible via the unit’s wireless interface or through USB, enabling direct logging of values from the digital display into common inspection workflows. Does the micrometer come with specialised anvils or accessories for curved surfaces? The product’s special features note that an anvil with ball is not included; accessories for specialised measurements must be ordered separately if required. What makes the spindle design beneficial for fine measurements? The non-rotating spindle reduces marking and slippage on delicate surfaces and improves repeatability when measuring small, finely finished parts with tight tolerances. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250 mm Setting Gauge for Micrometers With Thermal Shield, Accuracy ±0.0035 mm, Ø8 mm - Metav IndustryLine
Take advantage of the 250 mm nominal length combined with ±3.5 µm accuracy and integrated thermal protection for reliable micrometer set-up and repeatable process control — order directly via Metav Werkzeuge or request advice from our consultants. Micrometer setting gauge M304.318 — 250 mm, ±3.5 µm, Metav IndustryLine The Micrometer setting gauge M304.318 provides a stable reference for setting and verifying external micrometers in workshop and inspection environments. 250 mm nominal length Accuracy ±3.5 µm Thermal protection sleeve 8 mm shaft diameter Precise reference that keeps production consistent A solid reference standard reduces set‑up time and rejects. The robust 250 mm body is specified for use as a setting gauge for external micrometers and provides a clear, measurable baseline for size control. With an accuracy of ±3.5 µm, the device allows tighter control limits compared with routine workshop standards, enabling faster decisions on tool offsets and process corrections. The measurable advantage is fewer reworks and more predictable throughput because measurements used for adjustment are reproducible and traceable. Design that minimises thermal influence and handling error Thermal drift is a common source of short‑term measurement variation. The integrated thermal protection decreases the effect of hand warmth during frequent comparisons and helps maintain the reference temperature of the setting surface. Flat measuring faces give a stable contact geometry, while the slender 8 mm shaft and compact mass (approx. 0.3 kg) simplify positioning without introducing excessive cantilever forces. Together, these features reduce user‑induced variance and make routine setting tasks quicker and more consistent. Practical benefits for workshop calibration and set‑ups The unit is tailored for frequent use in manufacturing and quality control: it acts as a simple, portable master when calibrating or checking screw‑type micrometers and speeds up inspection workflows. The flat contact surfaces and compact form factor support reproducible placement on micrometer anvils, so fewer comparisons are needed to confirm correctness. This directness translates into time saved at every set‑up and increased confidence in first‑piece approvals and in‑process checks. Contact Metav Werkzeuge in Emmerich for a technical consultation or to secure the Metav IndustryLine micrometer setting gauge M304.318 for immediate integration into the measurement bench Technical data SKU: M304.318 GTIN: 4054469116693 Eclass: 21170102 Customs tariff number: 90173000 Core specifications Measuring range: 250 mm Accuracy: ±0.0035 mm (±3.5 µm) Shaft diameter: 8 mm Weight: 0.3 kg Special features Thermal protection sleeve Flat measuring faces Category: Accessories — Measurement instruments Intended purpose: setting external micrometers FAQ What is the primary use of this setting gauge? The micrometer setting gauge M304.318 is intended as a reference for setting and checking external micrometers, ensuring reproducible contact and dimension transfer during workshop set‑ups. How accurate is the device for precision checks? The setting gauge offers an accuracy of ±3.5 µm, making it suitable for tighter tolerance verification and repeatable setting procedures in industrial environments. Does the gauge require special handling to maintain accuracy? Normal care applies: avoid prolonged hand contact before measurement to reduce thermal influence; the built‑in thermal protection helps but stable handling and clean flat faces ensure best results. Can this gauge be used at the inspection bench and on the shop floor? Yes — the design balances portability and stability so the unit serves both inspection benches and on‑machine or shop‑floor set‑ups where rapid, repeatable comparisons are needed. Which product code should be referenced when ordering or requesting data sheets? Refer to SKU M304.318 and the Metav IndustryLine designation for all technical inquiries and ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250 mm Setting Gauge Metric 60 - Microtech Metrology
Take advantage of a compact reference that combines 250 mm working length with Metric 60 compatibility for dependable thread and dimensional checks; order through Metav Werkzeuge or consult the team for integration advice. Setting gauge (Einstellmaß) — Metric 60, 250 mm reference The Setting gauge is a precision reference accessory designed for thread verification and dimensional set-up tasks in metrology environments and workshop inspection stations. *Metric 60 compatibility for thread checks *250 mm reference length for medium-range tasks *Precision reference suitable for metrology labs *Manufactured by Microtech Metrology Reliable reference for thread and dimensional checks A compact reference gauge with a defined 250 mm length provides a convenient baseline for setting tools and verifying thread profiles where Metric 60 specification applies. The calibrated geometry of this reference simplifies transfer measurements and reduces setup time in production and test benches. As a purpose-built accessory, it supports consistent adjustment of measuring instruments and gauges, improving repeatability across routine checks. The clear, measurable length also aids in documenting inspection steps for quality records. Integrates into standard quality workflows Designed as an accessory for metrology systems, the reference tool fits into established measurement procedures without extensive alteration. The combination of a fixed length and a metric thread specification allows technicians to adopt the gauge as a master reference for comparative tests, sample validation and incoming inspection. Traceability is supported by the included identifiers (SKU: 110710025, GTIN: 4061905459238), which streamline inventory and documentation processes in quality management systems and audits. Practical advantages for workshop and lab use Manufactured by Microtech Metrology, this compact master reduces handling complexity during setup and inspection. The modest footprint makes it simple to store and position in calibration benches or on inspection tables, while the clear metric designation avoids mix-ups with other thread standards. As a durable reference item, it underpins efficient routine checks that protect production quality and reduce costly rework by catching setup deviations early in the process. For tailored advice on integrating the Microtech Metrology setting gauge into existing inspection routines, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: 110710025 GTIN: 4061905459238 Brand: Microtech Metrology Category: Accessory (Zubehör) Dimensions Length: 250 mm Special features Metric 60 specification axite enrichment: THREADards 250 mm METRIC 60 FAQ What is the primary application of this setting gauge? The setting gauge serves as a precision reference for thread verification and dimensional set-ups, with Metric 60 compatibility and a 250 mm reference length suitable for bench and workshop checks. Is the gauge traceable for quality documentation? Yes, the item is supplied with clear identifiers (SKU: 110710025, GTIN: 4061905459238) to support traceability within quality management and inspection records. Can this reference tool be used for tool presetting? The compact reference is intended for tool and instrument setting where a fixed 250 mm baseline and Metric 60 thread reference are required; it integrates into presetting procedures as a comparative master. Which environments is the setting gauge suited to? The gauge is designed for metrology labs and workshop inspection stations that require a stable, medium-range reference for routine checks and thread-related verification tasks. Who manufactures the product and how is it designated? The product is manufactured by Microtech Metrology and listed as a setting gauge accessory under SKU: 110710025. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-275mm Micrometer With 35mm Anvil Faces Touchscreen Display, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
This combination of proven mechanical design and modern data connectivity ensures reproducible workshop control and seamless process integration; rely on ISO 17025 calibration, 0.008 mm accuracy and Wireless+USB output for traceable results. Order directly via Metav Werkzeuge or consult our specialists for application advice. Digital micrometer 250–275 mm by Microtech Metrology — Touchscreen display and Wireless+USB output The digital micrometer 250–275 mm is a standard-range measuring instrument for machine shops and quality control, featuring 35 mm disc measuring faces and a non-rotating spindle for consistent contact. Digital touchscreen 1.54" display Wireless + USB data output ISO 17025 calibrated with certificate 35 mm disc measuring faces Dependable metrology for routine inspection A Standard-range instrument (measuring range 250–275 mm) that balances reach and stiffness for everyday shop tasks. The combination of a solid mechanical frame, 35 mm disc measuring faces and a non-rotating measuring spindle reduces deformation and surface marking while keeping readings stable over repeated cycles. With a quoted accuracy of 0.008 mm and a fine resolution of 0.0001 mm, the device supports reliable pass/fail checks and dimensional control in production. The evident benefit is fewer reworks and faster quality decisions, since readings are precise enough for standard machine‑tool and metalworking tolerances yet robust for shopfloor handling. Faster documentation and process linkage Equipped with a Touchscreen 1.54" display and both Wireless+USB data outputs, this measuring instrument simplifies data capture and integration into inspection routines. Wireless transfer enables cable‑free collection for batch sampling, while USB provides a direct link for local logging or PC software import. These options reduce transcription errors and speed up statistical process control (SPC) cycles, so datum collection and trend analysis become routine rather than time‑consuming. The touchscreen aids quick setting and unit selection, helping technicians save time during repeated measurement series. Certified accuracy and traceability for audits Delivered fully calibrated with an ISO 17025 certificate, the micrometer arrives ready for traceable measurement workflows and formal quality audits. The calibration to ISO 17025 documents conformity with recognised metrological standards and includes a calibration certificate, supporting internal compliance and external customer requirements. Built as a digital measuring instrument, it combines mechanical repeatability with documented metrological quality, which is especially valuable where certificate evidence is required for incoming inspection or supplier validation. For certified, shop-ready measurement with modern connectivity, request the Microtech digital micrometer (SKU 110782757) through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for specification guidance. Technical data Article number: 110782757 GTIN: 4061905457548 Manufacturer: Microtech Metrology Core specifications Measuring range: 250–275 mm Accuracy: 0.008 mm Resolution: 0.0001 mm Display: Touchscreen 1.54" Data output: Wireless + USB Features & materials Measuring faces: Disc Ø35 mm Spindle: Non-rotating measuring spindle Digital instrument: yes Calibration: ISO 17025 certificate included FAQ What measuring range does this instrument cover? The instrument covers a measuring range of 250–275 mm, which places it in the Standard category for general machine‑shop measurements. Is the micrometer supplied calibrated? Yes, the micrometer is delivered fully calibrated and includes an ISO 17025 calibration certificate, providing traceable measurement data. How are measurement results exported? Results can be exported via Wireless or USB connections, allowing integration into SPC workflows or direct transfer to inspection software. What ensures consistent contact and low wear on the workpiece? The device has 35 mm disc measuring faces and a non‑rotating measuring spindle to reduce surface damage and ensure repeatable contact geometry during measurements. Which applications suit this micrometer best? This digital micrometer is suited for workshop and production quality control tasks where a 250–275 mm measuring range, documented calibration and modern data output support are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-275mm Outside Micrometer Ratchet Stop, 0.005mm Accuracy, ISO 17025 Calibration Certificate Included - Microtech Metrology
Precise external measurement with a robust analogue mechanism, ratchet stop and traceable calibration. Benefit from the high accuracy (±0.005 mm) and reliable 0.01 mm reading for consistent quality control. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer — Microtech Metrology, 250–275 mm, ratchet stop A Micrometer from Microtech Metrology for calibrated external measurements in workshop and quality-control environments, supplied with an ISO 17025 calibration certificate. High accuracy ±0.005 mm Ratchet stop micrometer head Supplied with ISO 17025 calibration certificate Reduce rework with measurable accuracy The instrument delivers a repeatable measurement uncertainty of ±0.005 mm, combined with a 0.01 mm reading, which supports tighter tolerances and fewer rejected parts in serial production. The analogue frame offers mechanical resilience under routine workshop conditions, while the ratchet stop ensures consistent contact force so that user-applied pressure does not introduce variability. This combination results in shorter inspection times and a clearer pass/fail decision for quality control. Practical range for machine-shop applications Classified within the standard workshop range, the 250–275 mm span provides the ideal compromise between reach and rigidity for everyday machining and assembly tasks. The scale and spindle geometry keep deflection low across the measurement length, making the tool well suited for medium-sized components, fixtures and housings where a single-handed, robust instrument speeds up process checks. The familiar analogue operation reduces training overhead and integrates smoothly into existing inspection routines. Traceable calibration and durable design for dependable results Delivered with an ISO 17025 calibration certificate, the micrometer arrives ready for use in accredited quality workflows; the certificate documents traceability and measurement conformity. The ratchet mechanism and hardened spindle surfaces are designed for prolonged service life, reducing lifetime cost and downtime. For laboratories requiring documented metrological status or workshops aiming to centralise certified tools, the included calibration certificate provides immediate assurance without additional calibration steps. For traceable, workshop-ready precision choose the Microtech Metrology micrometer from Metav Werkzeuge — contact our Emmerich team for tailored advice and delivery options Technical Data SKU: 110112751 GTIN: 4061905458897 Measuring range: 250–275 mm Resolution: 0.01 mm Accuracy: ±0.005 mm Design: analogue micrometer Ratchet stop: yes Calibration: ISO 17025 certificate included Facts Category: Micrometers (external) Analog reading: yes Measuring range min: 250 mm Measuring range max: 275 mm Precision class: high-precision (±0.005 mm) Special features Ratchet stop micrometer head Supplied calibrated Traceable calibration (ILAC MRA listed via ISO 17025) Robust frame for workshop use FAQ What accuracy can be expected from this micrometer? The micrometer from Microtech Metrology delivers an accuracy of ±0.005 mm, suitable for high-precision workshop checks and quality-control tasks. Is a calibration certificate included with the instrument? Yes, the micrometer is supplied with an ISO 17025 calibration certificate, ensuring traceability and immediate use in accredited inspection processes. Which measuring range does this model cover? This model covers the 250–275 mm range, offering practical reach for medium-sized components and fixtures. How does the ratchet stop improve measurements? The ratchet stop on this micrometer provides consistent contact force, preventing over-tightening and reducing operator-induced variation during external measurements. Is the instrument digital or analogue? The device is an analogue micrometer with a 0.01 mm reading, combining mechanical robustness with fine resolution. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-275mm Thread Micrometer With Microcomputer, Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combining reliable digital readout, an extensive 250–275 mm measuring range and an ISO 17025 calibration certificate makes this micrometer a pragmatic choice for inspection and workshop use; its Wireless and USB data output simplifies integration into existing quality systems. Order the micrometer directly via Metav Werkzeuge or ask the consultants for tailored advice. Micrometer (thread micrometer) — Whitworth 55, 2.4" colour touchscreen (Microtech Metrology) A precision Micrometer (Whitworth 55) designed for accurate thread measurement on larger components within the 250–275 mm range 2.4" colour touchscreen display Wireless and USB data output ISO 17025 calibration certificate included 250–275 mm measuring range for larger components Precision tailored to threaded measurement The digital thread gauge delivers practical high-resolution control with an accuracy ±0.008 mm and a display resolution of 0.0001 mm, which together reduce uncertainty in thread profile evaluation. The micrometer’s non-rotating spindle preserves the integrity of delicate thread forms during measurement, while the included set of anvils for Whitworth 55 threads allows direct assessment without interim fixtures. Such a configuration shortens inspection cycles and supports repeatable results across serial checks. Fast digital capture and traceable documentation Data capture is streamlined by the 2.4" touchscreen user interface and by Wireless and USB outputs that enable straightforward transfer to inspection software or SPC systems. The instrument is supplied with an ISO 17025 calibration certificate, ensuring measurement traceability and facilitating audit requirements. Traceable calibration together with digital data export reduces administrative effort and supports robust quality records for internal audits or customer reporting. Robust handling for workshop and metrology bench With a measuring range of 250–275 mm, the device suits larger threaded parts common in maintenance, fitting and component assembly operations. The solid digital mechanics and touchscreen control are designed for frequent use in busy environments; included accessory anvils support immediate application without additional set-up. The instrument offers a balance of reach, stiffness and operator ergonomics that helps to maintain throughput while preserving measurement integrity. Integration and practical benefits Integration into established metrology routines is achieved through standardised data interfaces and a compact user interface that reduces training time. The combination of digital output, high resolution and factory calibration positions the micrometer as a rational investment for workshops requiring reproducible thread inspection and documented traceability. Operational efficiency is increased by fewer manual transfers and clearer record keeping for quality control processes. For procurement advice or to arrange a purchase through Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support and order handling Technical data Article number: 110722758 GTIN: 4061905456862 Manufacturer: Microtech Metrology Key specifications Measuring range: 250–275 mm Accuracy: ±0.008 mm Resolution (reading): 0.0001 mm Display: 2.4" colour touchscreen Data output: Wireless and USB Measuring spindle: non-rotating Features & accessories Thread type: Whitworth 55 Includes: 10x anvils 60–3.5 TPI (Whitworth 55) Calibration: ISO 17025 certificate included Digital instrument with touchscreen interface FAQ Is the micrometer delivered calibrated? The micrometer is supplied fully calibrated and includes an ISO 17025 calibration certificate documenting traceability and measured values. Which measuring range is covered by this device? The device covers a measuring range of 250–275 mm, suitable for larger threaded components and assemblies. Can measurement data be exported to a PC or quality system? Yes, measurement data can be transferred via Wireless or USB from the micrometer to inspection software or data collection systems. Is the instrument suitable for Whitworth thread inspection? The micrometer is configured for Whitworth 55 thread measurement and includes matching anvils (10x 60–3.5 TPI) for direct application. What level of precision does the micrometer provide? The digital micrometer offers an accuracy of ±0.008 mm with a display resolution of 0.0001 mm, supporting reliable thread inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-275mm Three-Point Internal Micrometer Digital With ON/Zero mm/inch ABS Preset Hold, Case - Metav IndustryLine
Take advantage of precise internal measurement through the combination of a three‑point measuring system, a digital readout with mm/inch and ABS functions, and a fine resolution of 0.001 mm to ensure repeatable, documentable bore checks. Order the instrument directly via Metav Werkzeuge or consult our product specialists for application advice. Three‑point internal micrometer M312.262 — digital, 250–275 mm (Metav IndustryLine) The three‑point internal micrometer M312.262 is a digital measuring instrument designed for accurate internal diameter measurement in machining, toolmaking and quality inspection applications. Digital display with ON/0, mm/inch, ABS Measuring range 250–275 mm Resolution 0.001 mm, accuracy 0.009 mm Repeatable centring for reliable bore measurement The three‑point contact system delivers consistent centring inside bores, reducing variation from off‑axis probing and enabling reproducible results across multiple measurements. This mechanical design stabilises the contact geometry so that each reading is taken from a defined datum, which is particularly valuable when checking seats, bushings and stepped bores. The robust contact arrangement improves process stability and lowers scrap rates by making borderline parts easier to classify. Digital readout and data capture improve inspection throughput Equipped with a digital display offering ON/0, mm/inch switching, ABS, PRESET and HOLD functions, the instrument speeds up routine checks and reduces transcription errors. The resolution of 0.001 mm combined with a stated accuracy of 0.009 mm supports tight tolerance work and gives clear, actionable values for statistical process control. The unit provides a data output (RB 4) for integration into measurement data collection systems, simplifying documentation and traceability in production and audit processes. Practical dimensions and workshop suitability With a measuring range of 250–275 mm and a measuring depth of 140 mm, the tool covers medium‑sized internal diameters common in assemblies and housings while remaining manageable at the bench. The instrument’s mass and construction lend stable handling during measurement, helping to avoid measurement disturbance caused by operator force. Note that delivery is without setting ring; this allows selection of a calibration ring suited to the specific nominal diameters in use and avoids unnecessary inclusions for bespoke measurement routines. For tailored advice on integrating the Metav IndustryLine three‑point internal micrometer into quality control routines, contact Metav Werkzeuge and discuss application, interfaces and calibration options with our specialists. Technical data Article number: M312.262 GTIN: 4054469120041 SKU: M312.262 Core specifications Measuring range: 250–275 mm Measuring depth: 140 mm Resolution: 0.001 mm Accuracy: 0.009 mm Weight: 4.9 kg Special features Digital display with ON/0, mm/inch, ABS, PRESET, HOLD Data output: RB 4 Measuring faces: included Delivery: without setting ring Category: internal micrometer (three‑point), digital FAQ How does the three‑point contact improve measurement repeatability? The three‑point contact ensures the measuring anvils centre within the bore, so the three‑point internal micrometer M312.262 registers diameters from a defined geometry and reduces variation caused by probe tilt. What level of precision can be expected from this instrument? The instrument offers a resolution of 0.001 mm and a declared accuracy of 0.009 mm, making the device suitable for fine internal measurements and quality control tasks where sub‑hundredth‑millimetre consistency is required. Can measurement results be transferred to a PC or inspection system? Yes. The micrometer provides a data output (RB 4) to support digital data capture and downstream documentation in inspection reports or SPC systems. Is a calibration or setting ring supplied with the micrometer? Delivery is without setting ring; this permits customers to select or supply a setting/calibration ring that matches their nominal diameters and tolerances. For which applications is the 250–275 mm measuring range most suitable? The 250–275 mm range and 140 mm measuring depth suit medium‑sized bores found in housings, gearboxes and larger tool components where centred, repeatable internal measurements are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250-275mm Three-Point Internal Micrometer Self-Centering, 0.012mm Resolution, Supplied in Case - Metav IndustryLine
Taking advantage of its self‑centring three‑point system, carbide measuring faces and an analogue 0.005 mm reading delivers consistent internal measurements with repeatable accuracy of ±0.012 mm; ideal for workshop and production QC. Order the three‑point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three‑point internal micrometer M836.725 — self‑centring, analogue precision (Metav IndustryLine) The Three‑point internal micrometer M836.725 is an analogue internal measuring instrument designed for accurate diameter measurement of bores and reamed holes in standard workshop and production environments. Self‑centring three‑point measuring system Analogue display with 0.005 mm scale Accuracy ±0.012 mm for repeatable results Carbide measuring faces; durable contact surfaces Reliable internal measurement for everyday workshop needs The instrument is engineered as a standard‑range internal micrometer covering a measuring span from 250 to 275 mm, placing it firmly within the workshop lengths most frequently used in metalworking and tooling. The self‑centring three‑point mechanism ensures the contact points align automatically with the bore, reducing setup time and eliminating centring errors common with simpler gauges. Thanks to the carbide measuring faces, contact wear is minimised and measurement stability is maintained under repeated use, which supports consistent quality control without frequent reconditioning. Clear analogue reading with industrial accuracy An analogue scale with a reading step of 0.005 mm combines tactile control with a resolution fit for precise checks; the instrument’s stated accuracy of ±0.012 mm provides a reliable tolerance band for typical machining and inspection tasks. The vernier‑style readout suits environments where battery‑free, robust operation is preferred and where a direct, unambiguous visual confirmation of the result is required. For users migrating from calipers or bore gauges, the mechanical feedback of an analogue instrument aids repeatable application of measuring force and supports hands‑on quality routines. Built for production use and straightforward handling Designed for routine use in machine shops, toolrooms and inspection benches, the tool’s geometry balances reach and rigidity for measurements across medium‑sized components. The micrometer is supplied in a protective case for transport, simplifying on‑site handling and storage between inspection cycles. Its construction supports rapid checks during set‑up and serial inspection, reducing process interruptions and helping maintain steady throughput on the shop floor. For repeatable internal measurements in production environments, choose the Metav IndustryLine three‑point internal micrometer M836.725 and contact Metav Werkzeuge in Emmerich for application advice or specification support via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M836.725 GTIN: 4061905041020 Manufacturer: Metav IndustryLine eCl@ss: 21170335 ETIM: EC003590 Numbers / Core technical data Measuring range: 250–275 mm Minimum measuring range: 250 mm Maximum measuring range: 275 mm Resolution (reading): 0.005 mm Stated accuracy: ±0.012 mm Analogue operation Special features / Design Self‑centring three‑point measuring system Carbide (hard‑metal) measuring faces Supplied in protective transport case (plastic or wooden) Suitable for workshop and production QC Category: Messschrauben (internal micrometers) FAQ What measuring range does this internal micrometer cover? The three‑point internal micrometer M836.725 covers a range of 250–275 mm, suitable for standard workshop measurements within that span. How precise is the analogue reading on the instrument? The analogue scale provides a 0.005 mm reading step and the device is specified with an accuracy of ±0.012 mm for repeatable checks. Are the measuring faces durable for frequent use? Yes, the tool is fitted with carbide measuring faces, which resist wear and give stable contact behaviour during serial inspections. Is the micrometer self‑centring and how does that help? The self‑centring three‑point system centres automatically within the bore, reducing alignment effort and improving repeatability compared with two‑point setups. How is the instrument delivered for safe handling? The micrometer is supplied in a protective transport case (plastic or wooden), which simplifies storage and transport between inspection points. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250-275mm Three-Point Internal Micrometer Self-Centring Interchangeable Spindle, 0.007mm Accuracy, Supplied in Case - Metav IndustryLine
Combine reliable self‑centring measurement with a 250–275 mm measuring range and interchangeable measuring inserts for consistent, repeatable bore checks; order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Three‑point internal micrometer MS908.669 — self‑centring bore micrometer, 250–275 mm (Metav IndustryLine) The Three‑point internal micrometer MS908.669 is a self‑centring bore micrometer designed for precision measurement of blind holes in machining and workshop quality control. Self‑centring three‑point measurement Measuring range 250–275 mm Accuracy ±0.007 mm Interchangeable measuring insert Accurate bore measurement where alignment matters The three‑point design provides a self‑centring contact with the bore, which reduces alignment error and speeds up set‑up when checking blind holes. With a stated accuracy of ±0.007 mm and an analogue reading step of 0.005 mm, the instrument delivers reproducible results for routine quality checks. The mechanical nonius format keeps the workflow straightforward and avoids dependencies on batteries or electronics, supporting continuous shop‑floor operation. Robust construction for workshop use Classified within the standard range for workshop micrometres, the device covers 250–275 mm, a span that balances reach and stiffness for typical machine‑shop components. The measuring faces are made of carbide, improving wear resistance when probing machined bores. The interchangeable measuring insert system allows quick replacement of worn or specialised tips, extending the instrument’s service life and adapting it to specific bore geometries. Practical handling to reduce cycle time Designed for efficient operation, the instrument’s three‑point geometry centres itself in the bore and thus shortens measurement cycles compared with multi‑step setups. The analogue format is tactile and direct, providing immediate feedback during measurement. Supplied in a protective case for secure transport, the tool is ready for use at different workstations and is dimensioned to be handled easily by one operator for most inspection tasks. Reliable data for consistent quality control Used within a production or inspection routine, the micrometer supports fast go/no‑go decisions and reduces rework by providing consistent internal diameter readings. The combination of a defined measuring range, carbide contact faces and an exchangeable insert system means fewer interruptions for maintenance and predictable measurement behaviour over time. The instrument is especially well suited to blind‑hole verification in component production, jig making and fitting operations. Contact Metav Werkzeuge today to discuss how the MS908.669 can be integrated into existing inspection routines or to arrange a tailored measurement solution from their Emmerich facility Technical data Article number: MS908.669 Product type: Three‑point internal micrometer Brand: Metav IndustryLine Facts Measuring range: 250–275 mm Measuring range (min): 250 mm Measuring range (max): 275 mm Accuracy: ±0.007 mm Reading increment: 0.005 mm Length: 145 mm Special features Self‑centring three‑point measurement Carbide measuring faces Interchangeable measuring insert Suitable for blind‑hole bores Supplied in protective case Analogue mechanical instrument FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 250–275 mm, intended for medium‑sized bores in workshop use. Is the device suitable for blind‑hole measurements? Yes, the three‑point, self‑centring geometry is specifically designed for reliable measurement of blind holes. What accuracy and resolution can be expected? The micrometer offers an accuracy of ±0.007 mm with an analogue reading increment of 0.005 mm. Can the measuring faces be replaced or adapted? The instrument features an interchangeable measuring insert, and the measuring faces are carbide for long service life. How is the product delivered and how is it identified? The tool is supplied in a protective case and is listed as MS908.669 from Metav IndustryLine Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250-300mm Micrometer Caliper Digital Wireless USB, ISO 17025 Calibrated, Ø8mm Measuring Faces, 110mm Depth - Microtech Metrology
The high-precision combination of ±0.007 mm accuracy, Wireless and USB data output and an ISO 17025 calibration certificate delivers reproducible measurement results and traceability for quality assurance. Order the outside micrometer directly via Metav Werkzeuge or contact the consultants for application advice. Outside micrometer — digital, 250–300 mm range, Wireless + USB (Microtech Metrology) The Outside micrometer is a precision digital measuring instrument designed for workshop and inspection tasks with a 250–300 mm measuring range and integrated Wireless and USB data output. High accuracy ±0.007 mm Wireless and USB data output ISO 17025 calibration certificate included Throat depth 110 mm Consistent accuracy for quality control and production The digital outside micrometer offers a measurable improvement in process reliability through its accuracy of 0.007 mm, which is documented and repeatable. That level of precision supports rigorous incoming inspection and in‑process checks in the machine shop, reducing rework and scrap. The 250–300 mm measuring range covers common medium‑sized components, providing a practical reach without compromising stiffness. Using a calibrated instrument with a certified measurement uncertainty creates a clear audit trail for quality records. Fast, loss-free data capture to streamline workflows Integration of Wireless and USB data output makes the device suitable for automated data logging and statistical process control. Measurement results can be transferred directly to inspection software or a spreadsheet, eliminating transcription errors and saving operator time. The digital readout simplifies interpretation compared with analogue scales, while the electronic interface supports traceable data collection for traceability and process improvement initiatives. Robust geometry and measurement interfaces for repeatability The instrument’s measuring faces have a Ø8 mm contact area, designed to deliver stable contact with cylindrical and flat surfaces, and the 110 mm throat depth allows access to recessed features and wider parts. The solid frame construction balances rigidity with manageable handling, which helps maintain consistent measuring force and repeatable readings across a production shift. These mechanical attributes reduce variability caused by operator handling and part orientation. Calibrated delivery for immediate use in inspection routines This micrometer is supplied fully calibrated under ISO 17025 and includes a calibration certificate, enabling immediate use in regulated measurement environments. The delivered calibration ensures comparability with laboratory standards and supports compliance with internal quality systems or external audits. With documented calibration, the instrument can be incorporated directly into control plans and measurement routines without interim verification steps. For traceable, workplace‑ready measurement solutions from Microtech Metrology, contact Metav Werkzeuge in Emmerich for tailored procurement and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 115053007 GTIN: 4061905040610 Manufacturer: Microtech Metrology ECLASS: 21170328 ETIM: EC003590 Core measurements Measuring range: 250–300 mm Accuracy: 0.007 mm Measuring faces diameter: Ø8 mm Throat depth: 110 mm Special features Digital readout Data output: Wireless and USB ISO 17025 calibration certificate included Category: Outside micrometer FAQ Is the device supplied calibrated and traceable? Yes. The outside micrometer is delivered fully calibrated under ISO 17025 and includes a calibration certificate for traceability. Which data interfaces are available for measurement capture? Measurement results are available via Wireless and USB outputs for direct logging into inspection software or data‑collection systems. What measurement range does the instrument cover? The instrument covers a measuring range of 250–300 mm, suitable for medium‑sized components and workshop inspection tasks. How large are the contact faces and what depth can be reached? The contact faces measure Ø8 mm and the throat (frame) depth is 110 mm, enabling stable contact and access to recessed features. Is the accuracy sufficient for industrial quality control tasks? With an accuracy of 0.007 mm and ISO 17025 calibration, the micrometer meets the needs of many industrial quality assurance applications requiring tight tolerances. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com