Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
90-140mm Universal Bore Gauge Digital Wireless+USB, Anvils Not Included - Microtech Metrology
Take advantage of a digital micrometer that combines accurate measurement (±0.004 mm), a practical 90–140 mm measuring span and Wireless+USB data transfer; order the instrument directly via Metav Werkzeuge or contact our consultants for configuration advice. Universal outside micrometer – digital, Wireless+USB (Microtech Metrology) A Universal outside micrometer designed for workshop and production use, offering a 90–140 mm measuring span with digital data output for streamlined quality control Digital readout with high resolution Wireless and USB data output Measuring range 90–140 mm High accuracy ±0.004 mm Precision that supports reliable decision-making The Universal outside micrometer couples an extended measuring span with dependable tolerance control: a measuring range of 90–140 mm and an accuracy of ±0.004 mm make it suitable for production sampling and final inspection tasks. The device’s high-resolution readout (0.0001 mm) renders small deviations visible immediately, which shortens inspection cycles and reduces costly rework. This combination of range and precision supports consistent quality outputs in metalworking and component assembly. Efficient data capture to speed up workflows Equipped with Wireless+USB interfaces and a digital display, the instrument eliminates manual transcription and enables direct capture of measurements into data-logging or SPC workflows. Wireless transfer supports flexible bench or jig measurement, while USB provides a reliable wired option for fixed workstations. The result is fewer transcription errors and faster reporting, aiding traceability and process control across shifts and production lines. Please note that anvils are not included, allowing tailored selection of measuring faces for specific geometries. Practical build for everyday measurement tasks A robust frame and a 62 mm measuring depth combine accessibility with stability when measuring shafts, collars and stepped parts. The digital electronics are arranged for workshop resilience and rapid readout, making the device suitable for both frequent shop-floor use and controlled inspection benches. The unit’s design balances ease of handling with repeatability, supporting efficient measurement routines in small-batch and serial production environments. For product configuration, specialised accessories or purchase, contact Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and order support Technical data Article number: 115051477 GTIN: 4061905458248 ECLASS: 21170328 Digital: yes Data output: Wireless+USB Facts Measuring range: 90–140 mm Measuring depth: 62 mm Accuracy: ±0.004 mm Readout resolution: 0.0001 mm Special features Anvils not included Wireless and USB interface Digital display for fast readout Manufacturer: Microtech Metrology FAQ What measuring range does the micrometer cover? The Universal outside micrometer covers a range of 90–140 mm and is intended for external dimension checks on medium-sized components. What accuracy can be expected from this instrument? The Universal outside micrometer provides an accuracy of ±0.004 mm, suitable for routine production control and detailed inspection tasks. How are measurements exported from the device? Measurements are transmitted via Wireless+USB; the micrometer supports wireless batch transfer and a direct USB connection for stable data capture. Are measuring anvils delivered with the micrometer? No, anvils are not included. This allows selection of specific measuring faces to suit shafts, rings or other geometries. Is a calibration certificate supplied with the device? The product is supplied ready for use with factory calibration; for an accredited certificate or special calibration scope, please contact Metav Werkzeuge for options Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
900-1000mm Bench Micrometer With 1.5" Colour Touchscreen, Wireless/USB, Ø25mm Measuring Faces, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of the combination of large-range capacity, reliable ISO 17025 calibration and flexible data transfer for efficient inspection of oversized components; the robust CNC machined aluminium housing and wireless/USB connectivity support continuous production workflows. Order the micrometer directly via Metav Werkzeuge or ask the consultants for integration advice. Microtech Metrology digital micrometer 900–1000 mm — large-range electronic micrometer with wireless data The Microtech Metrology digital micrometer (900–1000 mm) is a high-capacity measuring instrument designed for large-format industrial measurements and data-driven quality control. Large 900–1000 mm measuring range Wireless and USB data output ISO 17025 calibration certificate included CNC machined aluminium housing Accurate, traceable measurement for large components Measuring long components reliably requires a device engineered for stiffness and repeatability; this micrometer’s 900–1000 mm range and specified accuracy 0.01 mm place it in the large-range class for heavy‑duty workpieces. The instrument is supplied with an ISO 17025 calibration certificate, which documents traceability and reduces setup time for quality departments. For workshop managers this means fewer rechecks and clearer acceptance criteria when handling shafts, housings or large fixtures. Seamless data flow to speed up inspection routines Integrated wireless and USB outputs, plus a comprehensive memory manager that stores 2000 values, transform manual readings into actionable data. The unit supports multiple transfer modes compatible with Windows, Android, iOS and macOS, and can operate as a HID device for direct input into measurement software. These features cut transcription errors and streamline reporting—measurable gains where traceable digital records are required for process control. Robust construction built for industrial use A solid CNC machined aluminium housing provides thermal stability and impact resistance, while the Ø25 mm measuring faces ensure contact stability across large diameters. The colour 1.5" touchscreen gives clear on‑device feedback for Go/NoGo, Max/Min and graphical readouts, simplifying use at the bench. The design balances portability with the mass needed to reduce vibration-induced measurement scatter during manual handling. Practical benefits and return on integration Choosing a calibrated, network-ready measuring instrument reduces downtime associated with manual documentation and accelerates acceptance of parts throughout production and incoming inspection. The combination of ISO 17025 calibration, reliable 0.01 mm accuracy and digital output options makes this micrometer a cost-effective upgrade for workshops seeking consistent, auditable measurement data without complex retrofits. Contact Metav Werkzeuge in Emmerich to discuss specification matching, data integration options or to request the calibration documentation; reach Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 110181108 GTIN: 4061905039690 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 900–1000 mm Accuracy: 0.01 mm Display resolution: 0.0001 mm Weight: 6.7 kg Measuring faces: Ø25 mm Special features Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Memory: 2000 values, folder system, statistics mode Functions: Go/NoGo, Max/Min, Formula, Timer, Linear and temperature correction Industrial interfaces: Wireless HID, USB HID, optional Modbus RTU (RS‑485) Housing: CNC machined aluminium solid block Calibration: ISO 17025 certificate included FAQ What measuring range does this instrument cover? The device covers a 900–1000 mm measuring range, making the Microtech Metrology digital micrometer suitable for large‑format components and fixtures. Is the micrometer delivered calibrated? Yes, the micrometer is delivered with a calibration certificate issued to ISO 17025, supplied with the instrument for immediate traceability in quality systems. Which data interfaces are available for automated logging? The instrument supports wireless transfer and USB HID; additional modes include wireless HID+mac and an optional Modbus RTU interface for RS‑485 industrial networking. How stable is the measuring contact for large diameters? The tool features Ø25 mm measuring faces and a solid CNC machined aluminium housing to maintain contact stability and reduce measurement variation on large parts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
9000-10000 mm Bench Micrometer Modular Digital Touchscreen, IP65 - Microtech Metrology
Benefit from the combination of modular construction, Industry 4.0 connectivity and ISO 17025‑calibrated accuracy to secure reliable, large‑format dimensional inspection. Order the instrument directly via Metav Werkzeuge or consult our specialists for tailored configuration. Microtech Modular Frame Micrometer 9–10 m — Sub‑micron capability and Industry 4.0 ready The Microtech Modular Frame Micrometer 9–10 m is a modular, high‑precision instrument designed for large‑component dimensional inspection and seamless process integration in industrial metrology. Modular aluminium housing for easy assembly ISO 17025 calibration certificate included Wireless and USB data transfer options Traceable, high‑precision measurement for very large components The instrument offers ISO 17025 traceability and is delivered with a calibration certificate, ensuring measurements meet recognised laboratory standards. The device provides a fine reading resolution of 0.0001 mm, supporting highly reproducible results across long spans; this capability is particularly beneficial where consistent dimensional control over metres rather than millimetres is required. With Ø50 mm measuring faces, contact pressure is distributed to reduce local deformation on heavy workpieces, while an IP65 enclosure ensures reliable operation in dustier or coolant‑prone environments. These technical choices reduce measurement uncertainty and support robust quality control in heavy machining and large‑assembly manufacturing. Streamlined data workflows for faster quality control decisions Designed for modern production environments, the micrometer integrates Industry 4.0 functionality via a patented MICS system and supports multiple data paths: wireless transfer to the MDS app (Windows, Android, iOS, macOS), Wireless HID, USB HID and an optional MODBUS RTU interface (RS‑485) for PLC connections. Onboard memory for 2,000 values, folder management and statistical modes mean fewer interruptions during inspection runs. The colour touchscreen and graphing functions (2D mode, online graphics) make trend identification and Go/No‑Go checks immediate, reducing manual logging and enabling faster decision loops on the shop floor. Modular design and solid construction for repeatable results The device employs a modular concept that facilitates transport and assembly while retaining structural rigidity essential for long‑range measurement. The main frame is a CNC‑machined aluminium block, providing a stable support that minimises thermal distortion and vibration. Patent‑protected features and a comprehensive function set—linear and temperature compensation, max/min capture and formula modes—help adapt the system to specific production tasks. Given the measuring range of 9,000–10,000 mm, this instrument sits in the ultra‑long category for dimensional inspection and is intended for applications such as large shafts, rotor assemblies and heavy fixtures where repeatability and integration into existing data systems are priorities. Contact Metav Werkzeuge to discuss configuration options for the Microtech modular frame micrometer and to arrange supply or technical specification support; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 110161005 GTIN: 4061905039362 Manufacturer: Microtech Metrology Category: Messschrauben Facts Measuring range: 9,000–10,000 mm Resolution (reading): 0.0001 mm Weight: 160 kg Measuring faces: Ø50 mm Modules: 10 Special features Modular design Colour 1.5" touchscreen Wireless + USB data output IP 65 protection ISO 17025 calibration certificate included Memory manager: 2,000 values Optional MODBUS RTU (RS‑485) CNC machined aluminium housing Patented MICS system and Industry 4.0 functions FAQ Which types of components are best measured with this instrument? Large shafts, rotors, housings and other heavy assemblies benefit most; the Microtech modular frame micrometer is designed for long‑span inspection and repeatable dimensional control over several metres. Is the micrometer supplied calibrated? Yes. The device is delivered with an ISO 17025 calibration certificate, confirming laboratory‑grade traceability for the Microtech modular frame micrometer (SKU 110161005). How can measurement data be exported for SPC or PLC systems? Data export is possible via Wireless transfer to the MDS app, Wireless HID, USB HID and an optional MODBUS RTU (RS‑485) interface for direct PLC integration. Is the system robust enough for a shop‑floor environment? The instrument features an IP65 enclosure, CNC‑machined aluminium housing and large Ø50 mm measuring faces, offering resistance to dust and coolant and providing stable contact for heavy workpieces. Can the micrometer be integrated into existing Industry 4.0 infrastructures? Yes. The patented MICS system, wireless connectivity options and optional MODBUS output are designed to integrate the instrument into modern production networks and data collection workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
925mm Setting Gauge For Micrometers With Thermal Shield, 0.01mm Accuracy, Ball Tip - Metav IndustryLine
Take advantage of the combination of ±0.01 mm accuracy, a 925 mm nominal length and integrated thermal protection for dependable micrometer set-up across long ranges — order the gauge directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Micrometer Setting Gauge M304.321.5 – 925 mm nominal, ±0.01 mm accuracy (Metav IndustryLine) The Micrometer Setting Gauge M304.321.5 is a precision reference instrument for setting and verifying external micrometers over long ranges, intended for workshop calibration benches and quality control rigs. 925 mm nominal length Accuracy ±0.01 mm Thermal protection for stable readings Ball-shaped measuring faces Reliable long-range precision for workshop and bench use The gauge sits in the Large (500–1,000 mm) class, offering a nominal length of 925 mm that bridges the gap between standard bench tools and heavy-duty long-range standards. With a documented accuracy of ±0.01 mm, the device is designed to reduce setup iterations when transferring dimensions to micrometers and other comparative instruments. The dimensional stability along its length supports repeatable reference points, which shortens inspection cycles and contributes directly to productivity gains in serial and bespoke production environments. Built to reduce thermal and handling effects Equipped with thermal protection, the reference reduces measurement drift caused by ambient temperature shifts — a common cause of error during long setups. The measuring surfaces are ball-shaped with a diameter of 16 mm, providing defined contact geometry that matches common micrometer anvils and minimises point deformation. At a mass of 1.5 kg, the gauge balances manageable handling with the stiffness required to maintain alignment during transfer measurements, helping to avoid artefacts introduced by flex or uneven support. Practical integration and traceable identification Constructed as an accessory for calibration tables and inspection stations, the gauge is supplied as a clearly identified reference with trade identification for inventory and traceability. The Metav IndustryLine designation signals compatibility with workshop workflows and stock systems; the compact footprint and robust contact geometry make the device well suited for repetitive setting tasks in mechanical workshops and calibration areas. For application advice or specification matching, Metav’s specialists can provide targeted information to ensure the reference fits existing micrometer families and inspection procedures. For reliable long-range micrometer setup, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine micrometer setting gauge M304.321.5 or to discuss application-specific adjustments Technical Data SKU: M304.321.5 GTIN: 4054469116839 eClass: 21170102 Customs tariff: 90173000 Facts Nominal length: 925 mm Accuracy: ±0.01 mm Weight: 1.5 kg Measuring face diameter: 16 mm Special features Thermal protection Ball-shaped measuring faces Category: Accessories – metrology Brand: Metav IndustryLine FAQ What length does the gauge cover? The Micrometer Setting Gauge M304.321.5 provides a nominal length of 925 mm, placing it in the Large (500–1,000 mm) class for long-range setting tasks. What accuracy can be expected when using this reference? The specified accuracy for the gauge is ±0.01 mm, enabling precise transfer of dimensions to external micrometers and comparative instruments. What type of measuring faces does the gauge use? The device uses ball-shaped measuring faces with a contact diameter of 16 mm, chosen to match common micrometer anvils and reduce local deformation. Is the gauge suitable for workshop and calibration-bench use? Yes; the Micrometer Setting Gauge M304.321.5 is designed for workshop calibration benches and quality-control setups where stable, repeatable long-range settings are required. How does the gauge handle thermal influences during measurements? Built-in thermal protection helps to reduce measurement drift caused by temperature changes, improving stability for routine setting operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
975mm Setting Gauge For Micrometer, Thermal Protection, Ball Tip, Accuracy ±10µm - Metav IndustryLine
Take advantage of the combination of high repeatability, generous reach and thermal protection for dependable micrometre setting across large components; order the setting gauge directly via Metav Werkzeuge or contact our consultants for tailored advice. Setting gauge for micrometres by Metav IndustryLine — 975 mm, 0.01 mm accuracy Setting gauge for micrometres designed as a long-range reference standard for setting external micrometres in workshop and inspection environments 975 mm nominal length for large assemblies 0.01 mm (10 µm) accuracy for consistent settings Spherical measuring faces for reproducible contact Integrated thermal protection to reduce error sources Reliable calibration for large-range micrometre set-up This long-range reference is intended to simplify the transfer of a defined nominal dimension into external micrometres used in jigs, fixtures and component inspection. With a nominal length of 975 mm and an indicated accuracy of 0.01 mm (equivalent to 10 µm), the gauge supports repeatable settings over distances where shorter standards lose stiffness. The spherical measuring faces ensure a defined contact geometry that reduces tilt and local deformation at the contact points, while the moderate mass of 1.6 kg balances stability with manageable handling. For production environments, the combination of reach and resolution reduces setup time and improves first‑pass yield by making micrometre adjustments quicker and more reliable. Minimise thermal influence and handling errors Thermal expansion is a common source of measurement drift on long setting standards. The built‑in thermal protection reduces the effect of ambient temperature changes during handling and short bench‑time transfers, helping to keep the reference dimension stable. The constructive choices emphasise usability: spherical contact faces and a compact profile make it easier to seat the gauge precisely against a micrometre anvil, while the reduced susceptibility to thermal shift lowers the need for repeated rechecks. In practice, the result is fewer interruptions for re‑setting and a smoother workflow in metrology benches and production control stations. Seamless workshop integration and traceability Designed as an accessory for metrology departments, the reference supports established setting routines and is straightforward to incorporate into existing calibration chains. The gauge is supplied with a clear identification (SKU M304.321.6) and is suitable for use where a long, rigid reference is required to set external micrometres. By reducing adjustment variability through geometry and thermal mitigation, inspection cycles become more efficient and measurement uncertainty is easier to control. Where traceability is required, the accompanying documentation describes the declared accuracy and the intended use case so that the standard can be included in routine quality records. For expert advice on selecting the correct long‑range setting gauge or to reserve the Metav IndustryLine setting gauge for micrometres (975 mm, 0.01 mm), contact Metav Werkzeuge for a consultation and procurement support Technical Data Article number: M304.321.6 GTIN: 4054469116846 Tariff number: 90173000 Facts Nominal length: 975 mm Accuracy / resolution: 0.01 mm (10 µm) Weight: 1.6 kg Category: Accessory for metrology Special features Spherical measuring faces Thermal protection included Intended for setting external micrometres Label: Einstellmaß for micrometres, D = 16 mm FAQ What is the declared accuracy and what does it mean in practice? The declared accuracy of 0.01 mm (10 µm) means the reference is suitable for transferring a nominal dimension with that order of repeatability; the setting gauge is therefore appropriate for workshop and routine inspection tasks where micrometre adjustments require reliable 10 µm steps. Can this reference be used to set any external micrometre? Yes, the setting gauge is intended for setting external micrometres and is constructed with spherical measuring faces to give reproducible contact geometry when transferring the 975 mm reference dimension. How does the thermal protection help during normal use? The integrated thermal protection reduces short‑term dimension shifts caused by temperature differences between the gauge and the micrometre or bench, improving stability while handling and shortening the time needed to reach a stable measurement condition. Is the gauge suitable for large assemblies and fixtures? With a nominal length of 975 mm the gauge belongs to the large‑range class (500–1,000 mm) and is designed for setting micrometres that will be used on larger components, assemblies and fixture checks where extended reach and stiffness are required. What documentation accompanies the product? The setting gauge is supplied with product identification and specification details that support its integration into calibration and inspection procedures; SKU M304.321.6 is indicated for traceability and record‑keeping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate for Depth Micrometer - Metav IndustryLine
Taking the uncertainty out of measurement documentation by providing a formal, traceable calibration record and clear product identification; the certificate supports quality control and audit readiness. Benefit from structured documentation and prompt processing — order the calibration certificate directly via Metav Werkzeuge or consult our specialists if needed. Calibration Certificate for Depth Micrometer — Verification by Metav IndustryLine Calibration Certificate for Depth Micrometer — a formal verification document that records measurement conformity for workshop and inspection use Traceable calibration record For depth micrometers Clear identification with SKU MKali.350 Suitable for quality documentation Documented traceability for measurement reliability A calibration certificate provides a verifiable record that a depth-measuring instrument has been checked against defined standards. The document confirms the outcome of the verification process, offering traceability and a clear reference for later audits or internal quality checks. For organisations that must demonstrate consistent measurement practices, this form of paperwork reduces ambiguity and supports reproducible decision-making in production and inspection environments. Integration with quality workflows and audit processes The calibration record is designed to slot into existing quality documentation workflows, helping to maintain chain-of-custody and evidence for conformity assessments. Measurement results are recorded in a structured format that can be archived alongside inspection reports and process controls. By linking measurement outcomes to the instrument via SKU MKali.350 and identification data, the certificate facilitates traceable records without adding procedural complexity. Practical benefits for workshop and inspection teams Issuing a formal calibration certificate for a depth micrometer streamlines documentation tasks during audits and supplier assessments. Key information such as instrument identification and verification outcome is presented clearly for inclusion in inspection protocols. Metav’s offering emphasises pragmatic delivery of documentation so that engineering and quality teams can rely on the record for acceptance testing and traceable reporting while keeping administrative overhead low. For reliable documentation of measurement conformity, request the calibration certificate via Metav Werkzeuge and consult our specialists for tailored documentation support Technical Data Article number: MKali.350 GTIN: 4061905048777 ECLASS: 25149002 Product: Calibration certificate for depth micrometer Brand: Metav IndustryLine Facts Weight: 0 kg UID: MKali.350 Category: Calibration of measuring tools Special features Formal calibration record for depth micrometer Traceable identification for audits Structured format for quality systems Suitable for workshop and inspection documentation FAQ What information is contained in the calibration certificate? The calibration certificate records the verification outcome, instrument identification and traceable reference data; the calibration certificate issued for a depth micrometer by Metav IndustryLine (SKU MKali.350) provides a structured report for documentation. Can this certificate be used for internal quality audits? Yes, the calibration certificate for the depth micrometer is intended to support internal quality checks and external audits by supplying traceable documentation and clear instrument identification. Which instruments are covered by this document? This specific document covers depth micrometers and provides the corresponding verification data; the item is supplied under SKU MKali.350 by Metav IndustryLine. How is the certificate identified for archiving? Identification on the certificate includes the SKU MKali.350 and GTIN 4061905048777 to ensure unambiguous archiving and retrieval within quality management systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate for Depth Micrometer - Metav IndustryLine
Take advantage of a formally recorded calibration that documents the condition of a depth micrometer, provides clear audit evidence and simplifies quality routines; order the calibration directly via Metav Werkzeuge or ask our consultants for further clarification. Calibration certificate for depth micrometer — formal verification for workshop and inspection use (Metav IndustryLine) Calibration certificate for a depth micrometer that documents measured values and test status for quality records and trace inspections Formal document for measurement evidence Linked to GTIN and SKU for traceability Issued under the Metav IndustryLine brand Ensure reliable measurements and process stability A calibration certificate supplies a formal record that the measured points of a depth measuring instrument were checked and documented. The certificate summarises the test context and the measurement outcomes, which supports consistent production decisions and simplifies acceptance testing. By holding a written verification, audit trails become clearer and repeatability concerns are reduced, helping to maintain stable tolerances in series production and quality control. Reduce non‑conformances with documented measurement status Documented calibration data works as operational insurance during inspections and incoming goods checks. The certificate records which points were measured and whether values fell within defined limits, providing factual evidence for traceable quality management. This reduces dispute risk with suppliers or customers and supports corrective actions based on measurable facts rather than estimates. The clear record also assists in scheduling recurrent calibration intervals and resource planning. Fast integration into existing quality systems and inventory Linking the calibration record to an inventory identifier such as the GTIN and SKU enables straightforward archiving and digital tracking within a company’s document control or asset management system. Metav IndustryLine supplies the verification ready for filing alongside existing technical documentation, easing administrative workload and ensuring the instrument’s calibration status is visible where decisions are made. The centralised documentation approach supports continuity across shifts and multiple production sites. For a confirmed calibration record of your depth micrometer, contact Metav Werkzeuge in Emmerich — the team will arrange issuance and advise on how the certificate integrates with your quality processes; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: MKali.351.1 GTIN: 4061905049255 SKU: MKali.351.1 Category: Calibration of measuring instruments Brand: Metav IndustryLine Facts Weight: 0 kg Unique ID: MKali.351.1 Special features Calibration document for depth micrometer Suitable for workshop and inspection records Issued by Metav IndustryLine FAQ What does this certificate confirm? The certificate confirms that the specified depth micrometer was inspected and that measured values were recorded in a formal document issued under the Metav IndustryLine calibration procedure. Can the calibration record be added to an asset management system? Yes. The calibration certificate includes identifiers such as GTIN and SKU so the Metav IndustryLine certificate can be filed or linked in a company’s document control and asset registers. Is the certificate valid for audits and acceptance tests? The document serves as formal measurement evidence and is intended to support internal audits and acceptance testing by showing the inspection results for the depth micrometer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Depth Micrometer - Metav IndustryLine
Benefit from traceable calibration and clear, documented measurement results that support quality control and audit readiness; the calibration certificate confirms the accuracy of a depth micrometer and provides formal evidence for inspection records. Order calibration directly via Metav Werkzeuge or consult their specialists for tailored advice. Calibration Certificate — Traceable calibration for depth micrometer (Metav IndustryLine) The Calibration Certificate provides formal verification of a depth micrometer's measuring performance, delivering documented results suitable for workshop and inspection records and for integration into quality management workflows Traceable calibration certificate included Calibration report with measurable results Appropriate for workshop and lab documentation Certified evidence for reliable measurement records A formal calibration report converts a simple instrument check into documented proof that measurement equipment meets expected performance. The delivered certificate lists the measured values under defined conditions, so production and inspection processes gain a verifiable baseline. This clarity reduces uncertainty in pass/fail decisions and helps maintain consistent quality across batches by supplying audit-ready documentation. Practical benefits for production and quality assurance Regularly documented verification minimises rework and production stoppages by identifying drift before it affects parts. A calibrated depth micrometer, accompanied by its certificate, supports traceability in quality records and streamlines acceptance testing and incoming inspection. The concise measurement report enables rapid comparison against tolerance limits, improving throughput while preserving measurement integrity. Confidence through specialist calibration and supply chain transparency Metav's calibration offering is positioned as a pragmatic quality filter for European workshops: reliable documentation, clear measurement outcomes and a centralised service network that supports industrial and craft users alike. The calibration process strengthens suppliers' and customers' trust in measured dimensions and contributes to an accountable quality culture without adding complexity to daily workflows. Arrange traceable calibration with Metav Werkzeuge for dependable documentation and seamless quality records — contact Metav Werkzeuge to schedule calibration or request further specification details. Product details Article number: MKali.351 GTIN: 4061905049248 ECLASS: 25149002 Core data Weight: 0 kg Special features Product: Kalibrierschein Intended for: depth micrometer Category: Calibration of measuring tools SKU: MKali.351 Story trigger: kalibrieren Manufacturer: Metav IndustryLine FAQ What does the calibration certificate cover? The calibration certificate documents the measured values and test conditions for a depth micrometer, providing traceable results and a formal record suitable for quality control and inspection files. Is the recorded data suitable for traceability in quality systems? Yes; the certificate supplies measurement outcomes and test details that can be integrated into quality management systems as evidence of instrument verification. Does the certificate include the instrument identity? The calibration documentation references the specific tool and the associated SKU MKali.351, ensuring unambiguous linkage between the report and the calibrated depth micrometer. How often should the instrument be recalibrated? Recalibration intervals depend on usage, environmental conditions and internal quality plans; the certificate supports risk‑based scheduling by showing current performance data that guides repeat calibration timing. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Transport Case for 312.214–312.217 Digital Three-Point Internal Micrometre Set - Metav IndustryLine
Take advantage of a purpose-built transport solution that combines precise compatibility with M312.214–M312.217 instruments, a compact footprint and a lightweight 0.7 kg design for efficient workshop logistics. Order the case directly via Metav Werkzeuge or consult our advisors for application support. Case for M312.214–M312.217 (Transport case) by Metav IndustryLine The Case for M312.214–M312.217 offers practical transport and storage for digital three-point internal micrometers, designed to keep measuring instruments organised and protected during handling and transit. Compatibility with M312.214–M312.217 micrometers Secure storage for precision instruments Compact design and lightweight 0.7 kg Suitable for workshop and lab use Reliable protection that supports operational efficiency The transport case provides a straightforward solution for secure handling and storage of sensitive measuring tools. By ensuring compatibility with the specified internal micrometers, the case reduces handling time and the risk of accidental damage, supporting uninterrupted production and quality control. The lightweight 0.7 kg construction keeps shipping and manual transport economical while the compact footprint simplifies storage in tool trolleys or inspection benches. Practical design for everyday workshop use Designed with the needs of workshop technicians and quality inspectors in mind, the case facilitates quick identification and retrieval of the measuring set. The organisation provided minimises process interruptions and supports faster inspection cycles. Clear labelling and the inherent suitability for controlled environments mean the case is a pragmatic choice where repeatable access and safe storage of precision instruments are required. Logistics and procurement made straightforward Procurement and inventory management benefit from the clear product identifiers: M312.215.K as the article number, GTIN 4054469146805 and customs tariff 90173000, helping to streamline ordering, stock-keeping and documentation. The accessory nature of the case positions it as an efficient add-on for inspection benches, calibration stations and mobile measuring kits, keeping essential instruments ready for use and protected in transit. Contact Metav Werkzeuge in Emmerich for personalised advice or to place an order for this transport case; our team can confirm compatibility with the intended measuring setup and advise on delivery options Technical data Article number: M312.215.K GTIN: 4054469146805 Customs tariff: 90173000 Facts Weight: 0.7 kg eClass: 21100103 Special features Suitable for articles M312.213–M312.217 Category: Accessory for measuring instruments Story trigger: accessory FAQ What instruments fit in this case? The case is intended for the listed series and provides secure storage for the micrometers referenced; compatibility is specified for M312.214–M312.217 and related items. Is the case lightweight enough for mobile use? Yes, the case weighs 0.7 kg, which supports easy manual transport between workstations or to on-site inspection points. Can the case be used in both workshop and laboratory environments? The case is suitable for workshop and lab use, offering organised storage and protection for precision measuring tools. Which article number and identifiers should be used when ordering? Use article number M312.215.K and GTIN 4054469146805 for ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø20mm Anvil, Round-Head Accessory - Microtech Metrology
Take advantage of a dish-shaped anvil with a Ø20 mm measuring face for consistent reference points and repeatable results; its compact geometry supports stable contact and simple integration into inspection setups. Order the anvil directly via Metav Werkzeuge or consult our specialists for specification matching and delivery. Anvil, dish-shaped – Ø20 mm measuring face by Microtech Metrology An anvil designed as a dish-shaped measuring accessory for measuring instruments, providing a defined contact area for inspection and calibration tasks. Dish-shaped anvil, Ø20 mm measuring face Precision-machined measuring surface for repeatability Accessory for measuring instruments and test fixtures Compact geometry for stable reference contact Consistent reference for repeatable measurements The dish-shaped design creates a defined contact geometry that reduces variation when establishing a datum point on shafts, rings or small components. A single Ø20 mm measuring face provides a clear, repeatable reference area, which is especially useful when multiple operators or instruments are involved. By limiting contact to a stable, central surface, the accessory reduces ambiguous seating and helps maintain measurement consistency across inspection runs. Integration into inspection workflows and fixtures As an accessory for test benches and measuring instruments, the component is suitable for straightforward replacement in fixtures where a compact datum is required. Its form factor supports rapid set-up in repetitive control sequences and helps shorten cycle times in small-batch inspection. The result is improved throughput and lower rework rates because the defined measuring surface simplifies alignment and reduces operator interpretation during routine checks. Robust handling and compatibility in the workshop The compact, dish-shaped geometry keeps the part easy to handle and position on comparators, micromanipulators or custom jigs; its尺寸 minimises obstruction around the measurement point while maintaining a reliable seating area. The product from Microtech Metrology is conceived as a practical workshop accessory that prioritises clear reference contact and operational ease, supporting standardised measurement procedures without adding complexity to the toolset. Contact Metav Werkzeuge for the Ø20 mm dish-shaped anvil from Microtech Metrology to confirm compatibility with existing fixtures and to secure a reliable measurement reference for production and quality control Technical data Article number: 110750020 GTIN: 4061905458408 Manufacturer: Microtech Metrology Facts Measuring face diameter: Ø20 mm Shape: dish-shaped anvil Category: Accessory for measuring instruments Special features Precision-machined measuring surface Compact geometry for stable contact Suitable for use as a datum in inspection setups FAQ What is the primary use of this dish-shaped anvil? The dish-shaped anvil is intended as an accessory datum for measuring instruments and fixtures; the Ø20 mm measuring face provides a repeatable contact area for inspection and alignment when using the Microtech Metrology anvil (SKU 110750020). Which instruments is the anvil compatible with? The anvil is compatible with comparators, test fixtures and measuring benches that accept accessory anvils; the Microtech Metrology dish-shaped design is intended for use where a compact, defined reference surface is required. Is the measuring face suitable for small-diameter components? Yes. The Ø20 mm measuring face concentrates contact in a central area, making it appropriate as a reference on shafts, rings and other small components where a defined seating is needed. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Ø35mm Anvil, Dome Top, Microtech Metrology
Take advantage of a compact measuring accessory that combines a defined measuring face Ø35 mm with robust repeatability and simple integration into inspection setups. The result is improved measurement reliability and faster fixture alignment — order the accessory via Metav Werkzeuge or consult our specialists for application advice. Anvil — measuring instrument accessory with a Ø35 mm measuring face by Microtech Metrology The Anvil is a compact accessory for measuring instruments, designed to provide a stable, circular measuring face Ø35 mm for support, contact and fixture applications in inspection stations and test rigs. Measuring face Ø35 mm Compact accessory for measuring instruments Manufacturer: Microtech Metrology Stable contact for repeatable measurements A clearly defined measuring face Ø35 mm ensures consistent contact geometry and contributes directly to improved repeatability of manual and semi‑automated checks. The circular contact surface reduces local deformation on small parts and helps to maintain a uniform contact pressure during successive measurements. For production and quality‑control environments, this translates to fewer remeasurements, reduced scrap and a measurable gain in throughput. Simple integration shortens setup times The compact format is tailored for use as an accessory in inspection jigs and measuring fixtures, enabling straightforward seating or attachment without complex adapters. The concise geometry of the component eases alignment and reduces fixturing time during batch inspections. As a result, inspection cycles become more efficient while retaining a focus on precision, making the unit suitable for workshop and small‑series metrology tasks. Reliable identification and traceability for process control The product is supplied with a clear SKU and GTIN for inventory and traceability purposes, facilitating orderly stock keeping and documentation within quality systems. When used as part of a calibration or inspection routine, the accessory helps maintain consistent measurement conditions, supporting process control and auditability in regulated production lines. Practical benefits for workshop and inspection use The accessory’s uncomplicated geometry makes cleaning and visual inspection simple, lowering maintenance effort between shifts. Its role as a fixed contact surface supports reproducible inside, outside or step measurement set‑ups when combined with appropriate gauges and fixtures. Sourcing through a specialist distributor adds a layer of quality assurance, helping to align the accessory with workshop needs and supply reliability. Request the Microtech Metrology anvil (SKU 110750035) via Metav Werkzeuge for robust fixture support and efficient inspection routines — Metav’s Emmerich team can advise on application and delivery, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Product name: Anvil (Amboss) Article number: 110750035 GTIN: 4061905459184 Manufacturer: Microtech Metrology Category: Measuring instruments — accessories Facts Measuring face diameter: 35 mm SKU: 110750035 Asset image: 110750020-main.png Special features Accessory for measuring instruments and fixtures Compact geometry for easy alignment Supplied for integration into inspection setups FAQ What is the diameter of the measuring face? The measuring face has a diameter of 35 mm and is identified on the product as the Anvil (SKU 110750035) from Microtech Metrology. Is this accessory suitable for fixture use in small inspection stations? Yes, the Anvil is intended as an accessory for measuring instruments and is designed to simplify seating and alignment in inspection jigs and fixtures. How is the product identified for inventory and traceability? The accessory is supplied with SKU 110750035 and GTIN 4061905459184 for straightforward stock control and documentation in quality systems. Can the component be cleaned easily between uses? The simple geometry of the measuring face facilitates quick visual inspection and routine cleaning, supporting continuous operation in workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com