Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
8-10mm Three-Point Internal Micrometer Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025-calibrated traceability, high ±0.004 mm accuracy and convenient Wireless + USB data transfer for reliable internal diameter inspection; order the instrument directly via Metav Werkzeuge or consult the team for specifications. Three-point internal micrometer — Microtech Metrology, 8–10 mm, Colour 1.5-inch touchscreen The three-point internal micrometer is a compact, calibrated instrument for precise measurement of small internal diameters in fine mechanical and workshop settings. ISO 17025-calibrated with certificate included Colour 1.5-inch touchscreen display Wireless and USB data output Measurement range 8–10 mm Exceptional precision for small bores This instrument delivers ±0.004 mm accuracy, making it suitable for demanding inspection tasks where reproducibility matters. The three-point measuring system centres automatically in a bore, reducing eccentricity and operator-induced error compared with two-point probes; this yields more consistent results when verifying bearing seats, bushings or precision housings. The unit is supplied with an ISO 17025 calibration certificate, providing documented traceability that supports quality control processes and audits. Fast data capture and integration into workflows Equipped with a Colour 1.5-inch touchscreen and both Wireless and USB data outputs, the device streamlines measurement logging and SPC integration. The display shows readings clearly and the digital output allows direct transfer to inspection software or a PC for immediate analysis, reducing transcription errors and accelerating batch inspection routines. The readout resolution of 0.0001 mm supports fine reading steps while the instrument’s digital interface keeps results exportable and audit-ready. Compact design tailored to fine mechanical work Classified in the micro range for instruments up to 100 mm, this micrometer’s 8–10 mm span and compact frame suit watchmaking, precision engineering and small-bore quality checks where access and stiffness are critical. The included setting ring simplifies zeroing and master-setting on a gauge block or reference mandrel, while the device’s construction supports reliable handling in bench-top inspection. A measuring depth of 154 mm permits access into deeper housings where compact but stable contact is required. Built to support quality assurance and traceability Delivered fully calibrated to ISO 17025, the micrometer meets laboratory-grade documentation standards and arrives with its calibration certificate for immediate use in regulated environments. That documented calibration, combined with digital output and repeatable three-point contact, reduces measurement uncertainty and helps demonstrate compliance with internal inspection protocols. For production lines or small labs, this translates into fewer rejected parts and clearer evidence for quality records. Contact Metav Werkzeuge for technical advice or to arrange supply of the Microtech three-point internal micrometer, including the ISO 17025 calibration certificate and data transfer options Technical data Article number: 133701010 GTIN: 4061905074196 Manufacturer: Microtech Metrology Key figures Measurement range: 8.0–10.0 mm Measuring depth: 154 mm Accuracy: ±0.004 mm Resolution (display): 0.0001 mm Display: Colour 1.5-inch touchscreen Special features Digital measurement output: Wireless + USB Einstellring included Delivered with ISO 17025 calibration certificate Three-point internal measuring system Digital instrument (electronic readout) FAQ Is the micrometer delivered calibrated and traceable? Yes. The micrometer is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audit purposes. What measurement range and resolution does the instrument offer? The instrument covers an 8.0–10.0 mm range with a display resolution of 0.0001 mm, suitable for precision small-bore inspection. How are measurement results exported from the device? Results can be exported via the built-in Wireless interface or through USB, allowing direct integration with inspection software or data-logging systems. For which applications is this micrometer best suited? Its compact form and high repeatability make it ideal for fine mechanical work, watchmaking, precision housings and quality control of small internal diameters. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
8-10mm Three-Point Internal Micrometer Digital Readout, Measuring Drum Scale, IP65 - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, rugged protection and compact design for reliable blind-hole inspection. Benefit from rapid digital readout, a finely scaled measuring drum and a complete accessories package; order directly via Metav Werkzeuge or consult our specialists for application advice. Three-point internal micrometer M312.231.M — digital three-point internal micrometer, 8–10 mm, IP65 The Three-point internal micrometer M312.231.M is a compact digital gauge engineered for precise diameter measurement of blind holes in small components and precision assemblies. Digital display with ABS/INC/UNIT functions 0.004 mm accuracy for repeatable results IP65 protection against dust and splashes Includes setting ring and extension Precision for tight tolerances in compact workpieces This instrument belongs to the Micro measurement class (maximum range up to 10 mm), making it ideal where high accuracy on small parts is required. The drive mechanism delivers a stated accuracy of 0.004 mm, while the readout supports a fine resolution of 0.001 mm, so the gauge resolves micron-scale changes and records them reliably. The limited measuring span of 8–10 mm concentrates material stiffness and mechanical stability into a small footprint, which reduces bending and improves repeatability for watchmaking, toolmaking and other fine‑mechanics tasks. Digital convenience and environmental robustness A clear digital display with ON/OFF/SET and ABS/INC/UNIT keys simplifies measurement routines and mode switching, while the engraved measuring drum provides a backup scale for quick reference. Rated IP65, the instrument resists dust ingress and splash water, extending service life in workshop conditions. For integration into quality documentation, the device offers a data interface RB 4.1, supporting traceable transfer of measurement values into inspection systems. The scale and vernier are matt‑chrome plated, which reduces glare and makes graduations easier to read under workshop lighting. Accessories, standards and practical handling Delivery includes a precision setting ring and a 100×Ø5.7 extension, enabling reliable calibration and access to deeper blind bores without adapting multiple tools. The micrometer complies with DIN 863 standards for mechanical micrometers, ensuring familiar form and function for workshop technicians and inspectors. With a compact build and modest mass, the instrument sits comfortably in the hand for controlled application of measuring force, while the three‑point contact geometry stabilises the measuring span inside blind‑hole bores for more centred, repeatable readings. For reliable blind‑hole diameters in precision workshops, rely on Metav IndustryLine quality — contact Metav Werkzeuge in Emmerich for tailored advice and fast, dependable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M312.231.M GTIN: 4054469156378 ECLASS: 21170335 ETIM: EC003590 Facts Measuring range: 8–10 mm Accuracy: 0.004 mm Resolution: 0.001 mm Weight: 0.7 kg Length: 55 mm Protection class: IP 65 Standard: DIN 863 Data output: RB 4.1 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT Measuring drum with scale Matt‑chrome plated scale and vernier Three‑point internal measuring geometry Suitable for blind‑hole (sackloch) bores Includes setting ring and extension (100×Ø5.7) FAQ How accurate is this internal micrometer? The Three‑point internal micrometer M312.231.M achieves an accuracy of 0.004 mm, with a resolution of 0.001 mm, making it suitable for fine mechanical measurement tasks. Can the instrument measure blind holes reliably? Yes. The three‑point contact geometry and included extension are designed specifically to centre and stabilise measurements in blind‑hole bores. Is the gauge suitable for workshop environments? The device is rated IP65, providing dust protection and splash resistance, and the matt‑chrome scale improves legibility under workshop lighting. What accessories are supplied with the micrometer? Delivery includes a setting ring and a 100×Ø5.7 extension, allowing calibration and access to deeper blind bores without additional tooling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8-10mm Three-Point Internal Micrometer Self-Centering, 0.005mm Accuracy, Supplied in Case - Metav IndustryLine
Benefit from the combination of self‑centring three‑point measurement, ±0.005 mm accuracy and hardened measuring faces for reliable small‑bore inspection; order the instrument directly via Metav Werkzeuge or consult our specialists for application support. Three‑point internal micrometre M836.705 — self‑centring, 8–10 mm measuring range (Metav IndustryLine) The Three‑point internal micrometre M836.705 is a compact, self‑centring instrument designed for high‑precision internal measurement of small bores in fine mechanical workshops and quality control environments. Self‑centring three‑point measuring head Measuring range 8–10 mm Resolution 0.001 mm Hardened measuring faces Precision engineered for micro measurements Classified in the Micro segment (maximum measuring range up to 10 mm), this instrument is tailored for extremely compact tasks where stiffness and repeatability are decisive. The instrument achieves an industrial‑grade accuracy of ±0.005 mm, which together with a 0.001 mm reading capability allows reliable assessment of small bores, pin seats and precise internal features. The combination of fine resolution and mechanical robustness reduces uncertainty in repeat checks and streamlines inspection routines in production and repair benches. Durable construction for long‑term reproducibility A three‑point head that centres itself on the bore minimises alignment effort and ensures consistent contact geometry, converting setup speed into reproducible results. The presence of hardened measuring faces extends service life and preserves measurement integrity under regular use. As a mechanically simple yet precisely machined tool, the device reduces maintenance needs and provides a stable reference for comparison measurements, making it a practical choice for workshops that require dependable, long‑term performance. Workshop‑friendly analogue operation with clear benefits The analogue design offers a familiar vernier‑style handling, delivering tactile feedback and direct control during measurement tasks. With an analogue readout capable of 0.001 mm increments and a tested accuracy of ±0.005 mm, the instrument is suitable for fine mechanical trades such as watchmaking and small‑parts assembly as well as quality control in components manufacturing. The self‑centring function reduces operator influence on positioning, thereby lowering the risk of systematic error; for more complex measurement needs, Metav IndustryLine specialists can advise on integration into existing inspection processes. Discuss application requirements with Metav Werkzeuge and secure the Metav IndustryLine three‑point internal micrometre M836.705 for dependable micro‑bore measurement Technical data Article number: M836.705 GTIN: 4061905041280 ECLASS: 21170335 ETIM: EC003590 Facts Measuring range: 8–10 mm Accuracy: ±0.005 mm Resolution/readout: 0.001 mm Instrument type: analogue Measuring faces: hardened Special features Self‑centring three‑point measuring head Micro class: compact range for fine mechanics Suitable for internal bore measurement Category: micrometres FAQ What measurement tasks is this instrument best suited to? The three‑point internal micrometre M836.705 is optimised for internal bore measurement of small components, such as pin holes, bearing seats and precise internal features in fine mechanical assemblies. How precise are readings with this instrument? This Metav IndustryLine micrometre offers an accuracy of ±0.005 mm and an analogue readout resolution of 0.001 mm, which is appropriate for high‑precision workshop applications. What advantage does the self‑centring three‑point head provide? The self‑centring three‑point head on the M836.705 automatically centres in the bore, improving alignment and repeatability while shortening setup time for serial checks. Are the measuring faces resistant to wear? Yes, the instrument is fitted with hardened measuring faces to maintain measurement integrity and extend service life under regular use. Is the instrument suitable for watchmaking and micro‑parts inspection? The Micro classification and compact 8–10 mm range make the M836.705 well suited to watchmaking and other micro‑parts inspections where stiffness and fine resolution are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8-10mm Three-Point Internal Micrometer With Setting Ring And Extension, Supplied In Case - Metav IndustryLine
Take advantage of the precise combination of compact design and high repeatability: the instrument’s 8–10 mm measuring range and ±0.004 mm accuracy make it ideal for tight bore inspection, while the supplied setting ring and extension support reliable calibration and flexible use; order directly via Metav Werkzeuge or consult our specialists for application advice. Three-point internal micrometer – analogue three-point internal micrometer, 8–10 mm range, ±0.004 mm accuracy (Metav IndustryLine) The three-point internal micrometer is an analogue measuring instrument designed for repeatable internal diameter checks of small bores and blind holes in precision engineering and toolmaking. 8–10 mm measuring range Accuracy ±0.004 mm Three-point measuring for blind holes Matt chrome-plated scale and vernier Incl. setting ring and extension Precision where space is limited and errors are costly The compact design concentrates measurement capability into a narrow envelope, delivering ±0.004 mm repeatability in a small form factor. This makes the device particularly effective in quality control loops where space is restricted and component tolerances are tight; the fine vernier reading (0.001 mm) enables confident pass/fail decisions and reduces rework. By using a three-point contact arrangement, the gauge centres itself in the bore and minimises eccentricity, which translates into faster inspection cycles and fewer scrapped parts. Built for blind-hole inspection and controlled calibration Engineered specifically for internal measurements, the instrument’s three-point measuring head is tailored to blind-hole applications, providing stable contact even where access is limited. A setting ring is included for in-situ verification and to maintain traceability of measurements, while the supplied extension (50×Ø5.7) increases reach without compromising rigidity. The matt chrome-plated scale and vernier reduce glare and improve legibility under workshop lighting, helping operators obtain consistent readings throughout a shift. Robust handling and protective transport for shop-floor use Constructed with a focus on workshop durability, the instrument arrives in a protective case to prevent shock and contamination during storage or transit. The weighing of the unit and its compact length keeps handling straightforward on the production floor, allowing single-operator measurement where applicable. The analogue mechanism combines mechanical reliability with a high-resolution vernier display, delivering a balance of simplicity and fine measurement capability suited to calibration benches and routine inspection stations. Contact Metav Werkzeuge for tailored advice on applying the Metav IndustryLine three-point internal micrometer; stock and technical guidance are available directly from Emmerich. Technical data Article number: M312.131.P GTIN: 4054469158600 Manufacturer: Metav IndustryLine Facts Measuring range: 8–10 mm Accuracy: ±0.004 mm Reading (vernier): 0.001 mm Length: 50 mm Weight: 0.6 kg Tariff code: 90173000 Special features Analogue instrument with vernier scale Three-point measuring head Suitable for blind-hole measurements Includes setting ring and extension (50×Ø5.7) Scale and vernier matt chrome-plated Supplied in protective case FAQ What measurements can be taken with this micrometer? The three-point internal micrometer from Metav IndustryLine is designed for internal diameter measurement of bores and is especially suitable for blind-hole inspection within the 8–10 mm range. How is repeatability ensured when measuring small bores? Repeatability is achieved by the three-point contact geometry and fine vernier reading; the Metav IndustryLine three-point internal micrometer centres in the bore and minimises eccentricity for consistent results. Is calibration equipment included with the instrument? A setting ring is included for verification and calibration checks, enabling the user to confirm measurement accuracy before and during inspection runs. Can this instrument be used on the shop floor without additional protection? Yes; the instrument is supplied in a protective case to prevent damage during transport and storage, while the matt chrome-plated scale improves readability in typical workshop lighting conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80-90mm Three-Point Internal Micrometer Self-Centring, Analog 0.006mm Accuracy, Supplied in Case - Metav IndustryLine
Combining a compact three‑point contact geometry with self‑centring alignment and a measured accuracy of ±0.006 mm delivers dependable internal measurements for fine mechanical work; order the instrument directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Three‑point internal micrometer M836.717 — analogue, self‑centring 80–90 mm range The Three‑point internal micrometer M836.717 is an analogue, self‑centring gauge designed for precise internal diameter checks in fine mechanical and general workshop environments. Self‑centring three‑point contact Measuring range 80–90 mm Accuracy ±0.006 mm Delivered with transport case Precision where internal diameters matter The three‑point contact geometry gives a stable and repeatable measuring interface, turning small positional changes into consistent results. With a nominal measurement range of 80–90 mm and an indicated accuracy of ±0.006 mm, the instrument is suited to tasks that require fine repeatability rather than long‑range inspection. The analogue design combines mechanical robustness with an easily readable scale, offering straightforward checks without reliance on batteries or electronics. The internal spindle and contact assembly centre automatically in the bore, which reduces routine setup time and improves throughput in serial checking. Built for repeatable workshop use A self‑centring contact system minimises operator‑induced misalignment, translating into fewer scrap parts and faster quality confirmation. The micrometer’s contact faces are provided for reliable contact behaviour under repeated use, maintaining measurement integrity across production shifts. Because the instrument is analogue and mechanically driven, maintenance is limited to periodic cleaning and light lubrication; this reduces downtime compared with electronic alternatives while keeping long‑term operating costs predictable. The compact geometry also permits access to relatively small bores where conventional large gauges would be cumbersome. Practical handling and transport Handling benefits from the instrument’s compact build and the three‑point principle: the contact points stabilise the tool during insertion and measurement, which is advantageous when inspecting blind or off‑centre bores. Delivery includes a protective transport case to safeguard the instrument during storage and transit, supporting reliable calibration intervals and preserving the measuring faces. Clear markings and a mechanical adjustment allow experienced technicians to integrate the gauge quickly into existing inspection routines or use it as a reference tool for in‑process checks. For workshop‑ready internal measurement, choose the Metav IndustryLine three‑point internal micrometer and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M836.717 GTIN: 4061905040719 ECLASS: 21170335 ETIM: EC003590 Manufacturer: Metav IndustryLine Facts Measurement range: 80–90 mm Accuracy: ±0.006 mm Reading resolution: 0.005 mm Operation: analogue Measuring faces: present Special features Self‑centring three‑point contact Delivered in a transport case Suitable for fine mechanical internal measurements Compact design for confined bores FAQ What measurement range does the instrument cover? The three‑point internal micrometer M836.717 covers a measurement range of 80–90 mm. How accurate is the micrometer in routine checks? Routine accuracy is specified at ±0.006 mm for the M836.717, suitable for precise internal diameter control. Is the gauge digital or analogue? The M836.717 is an analogue internal micrometer, offering mechanical reliability without electronic components. What is the benefit of the three‑point contact design? The three‑point contact stabilises the tool within the bore and provides repeatable centring for consistent internal diameter readings with the M836.717. Does the instrument arrive ready for use? The instrument is delivered with a protective transport case to preserve the measuring faces and support safe storage of the M836.717. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80-95mm Three-Point External Measuring Micrometer 0.01mm Readout Carbide Faces, Ratchet, Case - Metav IndustryLine
Combine the 3‑point measuring head, carbide measuring faces and a tactile ratchet stop to secure repeatable external measurements across prism‑shaped workpieces; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. 3‑point outside micrometer M309.026 — 80–95 mm, 0.01 mm graduation (Metav IndustryLine) The 3‑point outside micrometer M309.026 is a purpose‑built precision instrument for fast, reliable external measurements of triangular and prism‑shaped components in fine mechanical and toolmaking settings. 3‑point measuring head for prism-shaped parts Measuring range 80–95 mm Graduation 0.01 mm for fine readings Carbide measuring faces with ratchet stop Precision where geometry matters This micrometer delivers consistent contact with prism‑shaped profiles thanks to its 3‑point measuring head, which seats reliably on three flank surfaces to avoid tilt and eccentricity during measurement. The instrument offers a reading of 0.01 mm and a stated accuracy of 0.008 mm, making it suitable where sub‑0.01 mm stability improves process control. The presence of carbide measuring faces increases wear resistance and keeps contact geometry stable over long production runs, which reduces the need for early rework and supports reproducible quality checks. Built for reproducible, shop‑floor use A tactile ratchet stop ensures constant measuring force, reducing operator‑induced variance and improving repeatability across successive checks. The frame is finished in a durable paint and the measuring sleeve is matt‑chrome plated, which limits glare and provides a corrosion‑resistant surface for the engraved scale. A setting gauge of 80 mm is provided for zero verification and straightforward routine checks. Delivered in a protective case, the instrument is ready for safe storage and transport between inspection points without risking damage to the precision faces. Compact range, versatile application With its 80–95 mm span the gauge falls into the compact measurement class ideal for fine mechanical work: it combines short, torsion‑resistant anvils with enough reach for many toolroom components. The design is particularly well suited to measuring three‑ or five‑sided workpieces commonly encountered in gear blanks, broached profiles and small fixtures. This balance of geometry, wear‑resistant faces and mechanical reliability makes the instrument a practical choice for small to medium series production, inspection benches and jigs where accurate external dimension control is required. Contact Metav Werkzeuge today to request the Metav IndustryLine M309.026 and discuss how its carbide faces and ratchet stop can improve measurement repeatability in your production process Technical Data Article number: M309.026 GTIN: 4054469117614 Tariff code: 90173000 Facts Measuring range: 80–95 mm Graduation / reading: 0.01 mm Accuracy: 0.008 mm Setting gauge: 80 mm Type: Analog / mechanical Special features Carbide measuring faces Ratchet stop for constant measuring force Painted frame; matt‑chrome measuring sleeve Delivered in protective case Suitable for triangular / prism workpieces FAQ How does a 3‑point measuring head improve results? A 3‑point measuring head centres on three flanks of a prism‑shaped workpiece, reducing tilt and eccentricity; the Metav IndustryLine M309.026 uses this principle to ensure the contact geometry is repeatable for reliable external measurements. What reading resolution and accuracy can be expected? The instrument provides a reading of 0.01 mm with a stated accuracy of 0.008 mm, which supports fine inspection tasks and tighter quality tolerances on small components. Is the micrometer suitable for shop‑floor use? Yes. The matt‑chrome sleeve, painted frame and carbide measuring faces combine robustness with low maintenance, and the ratchet stop reduces user variability during repeated measurements. Is the gauge supplied ready for transport and storage? The micrometer is delivered in a protective case for safe storage and transportation between inspection stations. Which parts is this micrometer intended for? The tool is optimised for triangular and prism‑shaped parts such as broached profiles, gear blanks and small fixtures; its compact 80–95 mm range is aimed at fine mechanical and toolroom applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800-900mm Digital Outside Micrometer With Friction Ratchet, Ø25mm Measuring Faces, IP65, Calibrated To ISO 17025 - Microtech Metrology
Take advantage of high-capacity range, shop-floor protection and traceable ISO 17025 calibration to keep large-part inspection reliable and auditable; the combination of robust electronics and precision mechanics ensures consistent readings across long spans. Order the outside micrometer directly via Metav Werkzeuge or ask our consultants if needed. Outside micrometer (800–900 mm range) – digital, IP65, Microtech Metrology The outside micrometer is a large-range digital micrometer designed for precise outside measurements on sizable components in workshop and production environments. IP65-rated digital micrometer head ISO 17025 calibration certificate included Large 800–900 mm measuring range Ø25 mm hardened measuring faces Measure large components with repeatable accuracy With a measuring range of 800–900 mm, this digital outside micrometer is built for long-span checks where stability and repeatability matter. The substantial frame and larger measuring faces provide improved contact stability compared with small instruments, reducing flex and ensuring a consistent measurement reference for parts such as housings, flanges or long shafts. The device combines mechanical stiffness with digital readout resolution to keep routine inspection efficient. Protected electronics for harsh industrial conditions Equipped with an IP65-rated digital head, the instrument tolerates dust and jetting water, making it suitable for shop‑floor use where coolants or particulate contamination are present. The sealed electronics preserve the display and sensor reliability, so readouts remain readable and dependable even in a busy production environment, lowering downtime associated with instrument maintenance. Calibrated and traceable for quality systems Supplied with a calibration certificate to ISO 17025 (Ilac MRA), this micrometer supports formal traceability and audit requirements. The included certificate documents measurement capability and enables integration into quality-control procedures, simplifying conformity checks and external audits. For documented inspection workflows, the calibration status reduces administrative effort while showing compliance with recognised laboratory standards. Precision mechanics for operator-independent results The instrument features a fine resolution of 0.001 mm and a stated accuracy of ±0.015 mm, paired with a ratchet stop to standardise applied measuring force. Together, these elements reduce variability from operator technique and improve reproducibility across repeated measurements. Ø25 mm measuring faces ensure a stable contact area on curved or flat surfaces, and the delivery includes setting rods for quick verification and adjustment on site. Contact Metav Werkzeuge in Emmerich for a technical consultation or to request a formal offer for the Microtech Metrology outside micrometer, and benefit from Metav’s close supply chain and calibration support Technical data Article number: 110179001 GTIN: 4061905040252 Manufacturer: Microtech Metrology Facts Measuring range: 800–900 mm Resolution: 0.001 mm Stated accuracy: ±0.015 mm Weight: 5.5 kg Protection class: IP 65 Special features Digital micrometer head ISO 17025 calibration certificate included Setting rods included Ø25 mm measuring faces Ratchet stop for consistent measuring force Large-frame design for improved stiffness FAQ What measuring range does this micrometer cover? The Microtech Metrology outside micrometer covers a measuring range of 800–900 mm and is intended for large-component outside measurements. Is a calibration certificate included with the instrument? Yes. The instrument is delivered with a calibration certificate issued to ISO 17025 (Ilac MRA), ensuring traceability and documented measurement capability. What protection does the digital head offer against shop-floor conditions? The digital head is IP65-rated, providing dust protection and resistance to water jets so the micrometer remains reliable in industrial environments. What resolution and accuracy can be expected from the micrometer? The device provides a resolution of 0.001 mm and a stated accuracy of ±0.015 mm, supported by mechanical features such as a ratchet stop for repeatable measurement force. Are accessories included for verification and setup? Yes. The delivery includes setting rods for quick verification and basic adjustment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
800-900mm Micrometer With Colour Touchscreen, Wireless/USB Output, ISO 17025 Calibrated - Microtech Metrology
Take advantage of large-range measurement, wireless data transfer and a full ISO 17025 calibration certificate to integrate high‑precision checks into production without delay; order the instrument directly via Metav Werkzeuge or consult the Metav team for specification and delivery advice. Frame micrometer — large-range 800–900 mm, Wireless + USB (Microtech Metrology) A frame micrometer designed for industrial dimensional control of large components, combining an extended measuring span with an integrated microcomputer and versatile data interfaces for seamless quality workflows. Large 800–900 mm measuring range ISO 17025 calibration certificate included Wireless and USB data output CNC-machined aluminium housing Accurate measurement over long spans for reliable quality control The 800–900 mm measuring capability places this instrument in the large‑range (500–1,000 mm) category, making it suitable for heavy‑duty components such as large housings, fixtures and assemblies where profile stiffness and repeatability matter. The combination of broad reach and substantial Ø25 mm measuring faces reduces local deformation and helps maintain a consistent contact surface over the entire span; this results in reproducible measurements even on sizeable workpieces. As a result, production checks can be consolidated with fewer instruments, improving inspection throughput and reducing handling steps. Fast digital readout and industry‑ready data handling Equipped with a 1.5" colour touchscreen and comprehensive memory and transfer options, the instrument supports efficient documentation and traceability. Onboard storage for 2000 values and a folder system simplifies batch recording, while multiple transfer modes — including Wireless connectivity and USB — enable direct integration with data‑collection software and shop‑floor systems. Optional MODBUS RTU output is available for plant‑level automation. These capabilities shorten measurement cycles, cut paperwork and enable a direct path from measurement to analysis, supporting Industry 4.0 workflows and faster decision making. Calibrated traceability and robust construction for industrial use Delivered with a full ISO 17025 calibration and accompanying calibration certificate, the instrument arrives ready for use in regulated quality environments. The solid CNC‑machined aluminium housing protects sensitive electronics and the measuring mechanism while keeping the overall instrument weight to a manageable level for workshop handling. Traceability to recognised standards reduces administrative steps before first use and gives confidence that inspection results are auditable and compliant with internal and external quality requirements. Precision and handling engineered for large components Resolution and accuracy figures ensure that this micrometer bridges practical workshop use and higher‑level inspection tasks: a reading step of 0.0001 mm supports fine display increments, while an accuracy of 0.01 mm aligns the instrument with robust industrial tolerances. The overall mass of the instrument contributes to stability during measurement and, together with the large measuring faces, lowers operator‑induced variation. Integration features such as wireless synchronisation to Microtech systems and standard data outputs mean the device can be adopted quickly into existing measurement routines and reporting chains. For specification support and delivery from Emmerich, contact Metav Werkzeuge for tailored advice on workshop integration and lead times — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical Data Article number: 110189008 GTIN: 4061905039683 Manufacturer: Microtech Metrology Weight: 5.5 kg Calibration: ISO 17025 certificate included Facts Measuring range: 800–900 mm Minimum measuring range: 800 mm Maximum measuring range: 900 mm Accuracy: 0.01 mm Resolution / display step: 0.0001 mm Measuring faces: Ø25 mm Special features Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Memory manager: 2000 values, folder system, statistics mode Measuring hub: Wireless Microtech instrument connection, 2D mode, probe mode Housing: CNC‑machined aluminium solid block Optional: MODBUS RTU data output Delivered with calibration certificate (ISO 17025) FAQ How is measurement traceability provided with this micrometer? The frame micrometer from Microtech Metrology is supplied with a full ISO 17025 calibration and an accompanying calibration certificate, ensuring traceable results suitable for formal quality records (SKU 110189008). What interfaces are available for data capture and integration? Data can be transferred via Wireless connection and USB; onboard memory and a structured folder system support offline logging before transfer to evaluation software. Is the instrument suitable for use on large machining or fabrication parts? Yes, the large‑range 800–900 mm span and Ø25 mm measuring faces are intended for sizeable components in jig, fixture and heavy machining contexts where profile stiffness and repeatability are required. What accuracy and resolution can be expected during routine checks? The device provides a display step of 0.0001 mm with an overall stated accuracy of 0.01 mm, delivering industrial‑grade precision for process control and inspection tasks. Can the micrometer be integrated into automated measurement systems? Integration is supported via wireless synchronisation features and optional MODBUS RTU for industrial connections; the instrument is designed to link with data‑collection and plant systems for automated workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
8000-9000mm Modular Bore Gauge Micrometer With Colour Touchscreen, IP65 - Microtech Metrology
Take advantage of the combination of modular transportability, industrial-grade data integration and a delivered ISO 17025 calibration certificate for reliable, reproducible measurement on very large components; order the modular outside micrometer directly via Metav Werkzeuge or request technical advice from our consultants. Outside micrometer (modular, 8–9 m range) — Microtech Metrology Outside micrometer »110160905« by Microtech Metrology is a modular, long‑range measuring instrument designed for extreme-length checks in production and assembly environments Modular construction for easy transport Sub-micron capable MICS system Wireless and USB data transfer ISO 17025 calibration certificate included IP65 protection for workshop conditions Measurement for the largest components with repeatable accuracy The modular design addresses the practical needs of measuring very large parts: with a measuring range of 8,000–9,000 mm the instrument is classified in the ultra‑long category, intended for hubs, long shafts and large housings where standard gauges cannot reach. The construction uses multiple interchangeable modules (9 modules fitted) so that long spans are assembled on site while still maintaining the required stiffness; the CNC‑machined aluminium housing and Ø50 mm measuring faces ensure a stable contact geometry over the full length. Because a traceable calibration certificate (ISO 17025) is supplied, measurement results are auditable and ready for integration into quality documentation. Seamless digital integration and data reliability Data handling is designed for industrial workflows: onboard electronics include the MICS system with a colour touchscreen display and multiple readout modes (graphic, Go/NoGo, max/min, formula and temperature correction). Connectivity supports Wireless HID, USB HID and wireless transfer to the MDS app across Windows, Android, iOS and macOS; an optional MODBUS RTU (RS‑485) output is available for PLC integration. These features convert each measurement into a transferable, storable datum — the unit’s memory manager stores up to 2,000 values with folder and statistics functions — which reduces transcription errors and speeds up process control. Designed for workshop use and harsh environments Practical aspects have been addressed for heavy‑duty use: ingress protection IP65 resists moisture and dust in shop environments, and the aluminium block body combines rigidity with manageable handling for assembly. The instrument’s measuring faces (Ø50 mm) and the modular approach mean fewer setup iterations for long components, while the robust design minimises deformation and drift during repeated runs. The unit is therefore suitable where reliable longitudinal measurement over several metres must be repeated with consistent results. Traceability, calibration and quality assurance A delivered ISO 17025 calibration certificate (Ilac MRA) accompanies the instrument, which is critical when measurements feed into documented inspection plans or regulatory records. Calibration under ISO 17025 confirms that the micrometer’s metrological chain was verified against recognised standards and that results are traceable. For production lines or specialist metrology labs this removes uncertainty about instrument readiness and shortens the path from delivery to qualified use. For integration support or to discuss how Microtech Metrology’s modular outside micrometer can be adapted to specific long‑range measurement tasks, contact Metav Werkzeuge in Emmerich for personalised technical consultation and delivery coordination. Technical Data Article number: 110160905 GTIN: 4061905039355 Manufacturer: Microtech Metrology SKU: 110160905 IP protection: IP 65 Calibration: ISO 17025 certificate included Facts Measuring range: 8,000–9,000 mm Measuring faces: Ø50 mm Modules: 9 Weight: 136 kg Display: Colour 1.5" touchscreen Special features Modular construction for transportable assembly MICS system with graphic and statistical modes Wireless and USB data transfer options Optional MODBUS RTU (RS-485) interface Memory manager: 2,000 values, folder system CNC machined aluminium housing Delivered with ISO 17025 calibration certificate FAQ What applications suit this modular long‑range micrometer? The modular outside micrometer from Microtech Metrology is engineered for long components such as shafts, large housings and pipe segments where measurements up to 9 m are required, offering repeatable contact geometry and industrial data output. Is a calibration certificate supplied and to what standard? Yes — the instrument is supplied with a calibration certificate carried out to ISO 17025, ensuring traceability and acceptance for formal inspection routines. How is measurement data exported from the device? Measurements can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, USB HID, or through an optional MODBUS RTU (RS‑485) interface for direct PLC or SCADA integration. Can the micrometer be used in dirty or humid workshop environments? Yes; the instrument is rated IP65, which protects the electronics and mechanical components against dust ingress and low-pressure water jets typically encountered in workshop settings. What support is available for integrating the micrometer into existing inspection workflows? Metav Werkzeuge provides technical consultation for adapting the Microtech Metrology modular micrometer to production and inspection processes, including advice on data transfer modes and calibration management. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
825mm Setting Gauge For Micrometer, D16, Accuracy ±9µm, Thermal Shielded - Metav IndustryLine
Take advantage of the combination of high stability, fine accuracy and thermal protection to keep micrometre gauges traceable and measurement processes reliable; order directly via Metav Werkzeuge or ask the consultants for application advice. Setting gauge for micrometres M304.321.3 — 825 mm nominal length, ±0.009 mm accuracy, Metav IndustryLine The Setting gauge for micrometres M304.321.3 is a precision reference instrument for setting and checking outside micrometres in workshop and laboratory environments, designed for long-format calibration tasks where stability and repeatability are essential 825 mm nominal length for large standards ±0.009 mm measurement accuracy Ball-ended measuring faces for repeatability Integrated thermal protection for stable readings Ensure measurement accuracy across production The gauge offers a clear basis for reliable micrometre adjustment: with a nominal length of 825 mm and a stated ±0.009 mm tolerance (equivalent to 9 µm), the instrument provides a stable reference across long spans. This level of precision supports consistent set‑up of outside micrometres, reducing variation between operators and lowering the likelihood of out‑of‑tolerance parts. The numerical specification is expressed as an objective performance parameter so that measurement uncertainty can be incorporated into quality control plans and process capability studies. Minimise thermal and contact‑induced variability Built with thermal protection and ball‑ended measuring faces, the reference is engineered to limit two common sources of error: thermal expansion and point loading at the contact. The thermally shielded design keeps readings stable in typical workshop conditions, while the spherical contact geometry (diameter 16 mm) reduces local stress and improves repeatability when setting micrometres. The instrument’s mass of 1.3 kg contributes to steady positioning on a workbench without being cumbersome to handle during routine calibration tasks. Integrate into routine calibration workflows Supplied as a robust accessory within the Metav IndustryLine portfolio, the gauge supports efficient calibration routines and traceable documentation. As a workshop reference, the device is suited to regular verification of outside micrometres and can be incorporated into ISO‑aligned internal procedures; its clear technical data simplifies the creation of test logs and measurement reports. Choosing a well‑specified standard from a recognised supplier helps maintain production continuity and underlines a commitment to precise, reproducible inspection results. For reliable long‑span micrometre calibration, select the Metav IndustryLine setting gauge M304.321.3 for its stability and fine accuracy — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M304.321.3 GTIN: 4054469116815 Customs tariff number: 90173000 Numbers / Core technical data Nominal length: 825 mm Accuracy / tolerance: ±0.009 mm Contact diameter: 16 mm Weight: 1.3 kg Special features / Materials Ball-ended measuring faces Thermal protection Category: Accessory for measuring instruments FAQ What is the primary purpose of this setting gauge? The setting gauge M304.321.3 is intended as a reference for setting and checking outside micrometres, providing a stable nominal length and defined accuracy for calibration tasks. Which measurement tolerance can be expected from the device? The instrument is specified with an accuracy of ±0.009 mm, which corresponds to 9 µm and serves as the basis for traceable micrometre adjustment. Can the gauge be used in a standard workshop environment? Yes, the gauge’s thermal protection and robust design make it suitable for routine workshop calibration and use as a bench reference. How does the ball-ended face benefit micrometre setting? The ball‑ended measuring faces (16 mm diameter) reduce local contact stress and improve repeatability when transferring a reference dimension to an outside micrometre. Who supplies and supports this product? This gauge is offered under the Metav IndustryLine range and is supported by Metav Werkzeuge for enquiries and order processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87-100mm Three-Point Internal Micrometer Colour Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of high‑precision bore measurement combined with fast digital data transfer and factory calibration: the device delivers ±0.004 mm accuracy across a practical 87–100 mm measuring range and transmits results via Wireless or USB, ensuring reliable integration into inspection routines. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer — Digital 87–100 mm, Wireless + USB (Microtech Metrology) The three‑point internal micrometer for repeatable, high‑speed bore inspection in production and metrology labs, combining ergonomic pistol‑style handling with an integrated microcomputer and colour touchscreen for clear readout and data logging. Wireless + USB data output Colour 1.54" touchscreen display ISO 17025 calibration with certificate Measuring range 87–100 mm Precision that confidently reduces rework and inspection time The instrument is built for measurable improvement in quality control: with a certified accuracy of ±0.004 mm, the tool meets the demands of fine dimensional inspection and provides a verifiable basis for acceptance decisions. The three‑point measuring head centres reliably in bores, reducing operator‑dependent variation, while the integrated microcomputer stabilises readings and reduces interpretation errors. These technical attributes translate into fewer rejects and faster throughput in medium‑volume production and incoming inspection. Fast data flow and ergonomic operation for smoother workflows Data transfer is simplified by Wireless and USB outputs, allowing immediate capture into inspection software or spreadsheets and eliminating transcription delays. The 1.54" colour touchscreen presents measured values and settings intuitively, while the pistol grip layout supports one‑hand operation for repetitive measurements. Together, these features speed up measurement cycles and make the device suitable for bench work as well as mobile inspection tasks on the shop floor. Ready for certification and traceable results Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate that documents traceability and measurement uncertainty. This makes the device suitable for audit‑critical environments and simplifies instrument management within quality systems. The compact measuring depth options (112 and 150 mm) extend application capability to deeper bores without compromising stability, offering a robust solution for process control and laboratory use. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology three‑point internal micrometer (SKU 133510010) into existing inspection workflows and to request the ISO 17025 calibration certificate from our Emmerich hub. Technical data SKU: 133510010 GTIN: 4061905041877 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 87–100 mm Accuracy: ±0.004 mm Display: 1.54" colour touchscreen Measuring depths: 112 mm and 150 mm Special features / Design Three‑point internal measuring head Integrated microcomputer Data output: Wireless and USB Ergonomic pistol grip for one‑hand use Delivered calibrated to ISO 17025 with certificate Digital readout, colour touchscreen interface FAQ What measurement accuracy can be expected from this micrometer? The three‑point internal micrometer achieves an accuracy of ±0.004 mm, as supplied and verified by the included ISO 17025 calibration certificate. How are measurement results exported from the instrument? Results are exported via Wireless or USB; the integrated microcomputer formats readings for direct capture into inspection software or data‑logging systems. Is the instrument supplied calibrated and traceable? Yes — the device is delivered calibrated to ISO 17025 and includes a calibration certificate that documents traceability and uncertainty. What measuring depths are available for internal bores? Two measuring depth options are provided: 112 mm and 150 mm, enabling reliable measurement of shallow and moderately deep bores. Which SKU identifies this product for ordering and documentation? The product is listed as SKU 133510010 and is manufactured by Microtech Metrology Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
87-100mm Three-Point Internal Micrometer Digital, Measuring Drum With Scale, IP65 - Metav IndustryLine
Take advantage of high-precision ±0.005 mm measurement, robust IP65 protection, and integrated digital data output for dependable inspection of blind bores; order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Three-point internal micrometre M312.242.M — digital, 87–100 mm measuring range by Metav IndustryLine The Three-point internal micrometre M312.242.M is a digital inside micrometre designed for accurate measurement of blind bores and internal diameters in fine mechanical and workshop environments. Digital readout with ABS/INC/UNIT functions Three-point measuring principle for repeatable centring Accuracy ±0.005 mm for high-precision checks IP65 protection for shop-floor resilience Precise bore measurement that reduces rework The three-point measuring concept ensures reliable centring in blind bores, minimising positional error when compared with two-point probes; combined with a measuring accuracy of ±0.005 mm, this makes the instrument suitable for demanding inspection tasks where tight tolerances matter. The digital display with ON/OFF/SET and ABS/INC/UNIT keys offers straightforward reading and unit switching, while the RB 4.1 data output supports traceable measurement logging. Conformity with DIN 863 underlines the instrument’s suitability for industrial quality control. Built to withstand workshop conditions Construction details such as the matt-chrome scale and vernier, sealed electronics and IP65 ingress protection protect the device against coolant spray and dust, extending service life in busy production areas. The presence of solid measuring faces and a robust drum with clear scaling promotes repeatability even during frequent use. The design balances tactile durability with the precision required for internal measurements, helping to reduce inspection time and avoid costly rework. Ready-to-use kit and straightforward integration Delivered complete with a setting ring and an extension, the micrometre is prepared for immediate use across a range of blind-bore depths. The digital interface simplifies manual reading and the RB 4.1 output enables direct capture of results for statistical process control or documentation. Classified within the micro measurement range (max 100 mm), the tool matches the needs of watchmaking, small-part assembly and precision toolrooms, offering a compact solution where space and accuracy are critical. For tailored advice or to arrange supply from Emmerich, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 — for specialist guidance on integrating the M312.242.M into existing inspection routines. Technical details SKU: M312.242.M GTIN: 4054469162430 Manufacturer: Metav IndustryLine Key figures Measuring range: 87–100 mm Minimum range: 87 mm Maximum range: 100 mm Indication / display increment: 0.005 mm Accuracy: 0.005 mm Length: 114 mm Weight: 4.6 kg Protection class: IP65 Standard: DIN 863 Features and accessories Digital display with ON/OFF/SET and ABS/INC/UNIT buttons Data output: RB 4.1 Measuring drum with scale Measuring faces included Suitable for blind bores Includes setting ring and extension Matt-chrome scale and vernier finish FAQ What measuring range does the device cover? The measuring range is 87–100 mm; the three-point internal micrometre M312.242.M is therefore classified in the micro range for compact, high-precision internal measurements. Can results be transferred to a PC or SPC system? Yes. The instrument provides an RB 4.1 data output for direct connection to data-logging systems and enables simple integration into documentation workflows. Is the device suitable for use at the machine? The unit’s IP65 rating and sealed electronics make it robust enough for shop-floor use where splash resistance and dust protection are required. Which accessories are supplied? The micrometre is supplied with a setting ring and an extension, allowing immediate adaptation to various blind-bore depths without additional purchases. How precise is the measurement and which standard applies? The device offers an accuracy of ±0.005 mm and is specified to the requirements of DIN 863, making it suitable for demanding quality-control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87-100mm Three-Point Internal Micrometer Self-Centering, 0.005mm Accuracy, Supplied in Case - Metav IndustryLine
Combining self-centring operation with a guaranteed 0.005 mm accuracy across an 87–100 mm measuring band, this instrument delivers repeatable results for blind-hole inspection and internal-diameter checks. Order via Metav Werkzeuge or request expert advice from our consultants for application-specific guidance. Three-Point Internal Micrometer MS908.662 — Self-centring, 87–100 mm, 0.005 mm accuracy (Metav IndustryLine) A compact, three-point internal micrometer MS908.662 engineered for precise measurement of blind bores and internal diameters in the 87–100 mm range. Self-centring measuring head 87–100 mm measurement range 0.005 mm graduation and accuracy Carbide measuring faces for durability Precision for blind-hole measurements that must be repeatable The three-point measuring principle combines three symmetrically arranged anvils to centre automatically within the bore, reducing alignment errors and improving repeatability. With a declared accuracy of 0.005 mm and a matching reading resolution of 0.005 mm, the instrument is configured for reliable internal measurements where tight tolerances apply. The mechanical three-point arrangement compensates for minor irregularities in bore geometry and, compared with single-anvil probes, significantly reduces positional uncertainty; this is particularly important when inspecting blind bores where full insertion of contact probes is not possible. Durable, workshop-ready design for routine inspection Constructed with carbide measuring faces, the unit withstands abrasive and repetitive contact without rapid wear, thus maintaining measurement integrity over time. The analogue vernier operation provides a dependable mechanical reading method that does not rely on batteries, ensuring continuous availability on the shop floor. The compact overall length (114 mm) and a preset setting ring at 87 mm allow straightforward setup for the nominal range and make the tool suitable for tight-access tasks. These attributes combine to reduce downtime and simplify daily inspection routines in toolrooms and maintenance departments. Micro-class capability and typical use cases With a maximum measuring range of 100 mm, this instrument falls within the micro classification for compact internal gauges, a category valued for high precision in confined spaces. Typical applications include fine mechanical assembly, toolmaking, quality control of small to medium-sized components, and inspection of blind-hole bores in housings and castings. The self-centring function and carbide contacts make it an effective choice for repeated checks during production runs and for settings where consistent, operator-independent measurement behaviour is required. For tailored application advice or to secure this self-centring internal micrometer from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and delivery options Technical Data Article number: MS908.662 Product: Three-point internal micrometer Brand: Metav IndustryLine Facts Measuring range: 87–100 mm Reading / Resolution: 0.005 mm Accuracy: 0.005 mm Overall length: 114 mm Setting ring: 87 mm Special features Self-centring three-point head Carbide measuring faces Analogue vernier operation Suitable for blind-hole bores FAQ Is this instrument suitable for measuring blind bores? Yes. The MS908.662 three-point internal micrometer from Metav IndustryLine is specifically designed for accurate measurement of blind-hole bores within the 87–100 mm band. What accuracy and resolution are provided? The tool offers a declared accuracy of 0.005 mm with a reading resolution of 0.005 mm, making it suitable for precise workshop inspection tasks. What are the measuring faces made from? The measuring faces are carbide-tipped to provide wear resistance and long-term dimensional stability under repeated use. Does the instrument require batteries or electronics? No. The device uses an analogue vernier principle and is entirely mechanical, eliminating the need for batteries and reducing maintenance points. For which workshop tasks is the micrometer best suited? Ideal for fine mechanical work, toolroom checks and production inspection of internal diameters and blind holes where compact, high-precision measuring tools are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87-100mm Three-Point Internal Micrometer With Carbide Measuring Faces, Setting Ring, DIN 863 - Metav IndustryLine
Take advantage of the combination of high measuring accuracy, carbide measuring faces and robust analogue mechanics for reliable internal diameter checks; order the instrument directly via Metav Werkzeuge or ask our consultants if further application advice is required. Three-point internal micrometer M312.163 – 87–100 mm, carbide faces (Metav IndustryLine) The Three-point internal micrometer M312.163 is a compact, analogue measuring instrument for precise determination of internal diameters in blind and through bores in workshop and inspection environments Three-point internal measuring 87–100 mm range Carbide measuring faces for long tool life High accuracy 0.005 mm resolution Supplied with setting ring and transport case Precise internal measurement with repeatable results The instrument uses a three-point measurement principle that centres automatically within the bore, improving centring accuracy and reducing operator-induced eccentricity. The analogue mechanism provides a direct tactile feel and a consistent resolution of 0.005 mm, which supports fine tolerance checks in production and incoming inspection. Carbide measuring faces ensure wear resistance and stable contact geometry, so measurement uncertainty remains low over extended use. Robust construction for everyday workshop use Conforming to DIN 863, the device features a matt chrome-plated scale and vernier that reduces glare and improves legibility under workshop lighting. The compact design and the included setting ring facilitate quick verification against a reference diameter, shortening set-up time and keeping inspection throughput efficient. The analogue nature removes dependency on batteries while the solid build supports frequent handling and transport. Designed for blind-hole inspection and easy handling Specifically prepared for blind-hole applications, the gauge’s geometry allows secure engagement inside blind bores, guaranteeing reliable results where single-point probes struggle. The included transport case protects the gauge during storage and shipment and aids organised tool management on the shop floor. At a measuring range of 87–100 mm and a nominal body length of 114 mm, the instrument strikes a balance between reach and manoeuvrability for medium-sized internal features. Contact Metav Werkzeuge for application advice and to secure the Metav IndustryLine three-point internal micrometer M312.163 for precision internal measurements in your inspection workflow Technical data SKU: M312.163 GTIN: 4054469119700 Label: Dreipunkt-Innenmess, 87 - 100 mm mit HM-Messflächen, Einstellring Manufacturer: Metav IndustryLine ECLASS: 21170335 ETIM: EC003590 Norm: DIN 863 Facts Measuring range: 87–100 mm Resolution / graduation: 0.005 mm Stated accuracy: 0.005 mm Body length: 114 mm Analogue instrument Special features Carbide (HM) measuring faces Three-point internal measurement geometry Supplied with setting ring (87) Suitable for blind-hole measurement Matt chrome-plated scale and vernier Delivered in transport case Analogue, battery-free operation FAQ Is this instrument suitable for blind-hole measurements? Yes. The three-point geometry is specifically designed for reliable engagement and centring in blind bores; the Three-point internal micrometer M312.163 performs repeatable internal diameter checks in such applications. What accuracy and resolution can be expected? The device provides a resolution of 0.005 mm and a stated accuracy of 0.005 mm, suitable for fine workshop inspection and quality control tasks within its measuring range. Does the delivery include a setting ring and protective case? Yes. The instrument is supplied with a setting ring and a transport case to protect the gauge during storage and transport. Is the micrometer analogue or electronic? The gauge is an analogue instrument; no batteries are required and the mechanical drive offers direct tactile feedback for controlled measuring. To which standard does the instrument conform and is calibration included? The instrument is manufactured to DIN 863. A setting ring is supplied for reference checks; periodic calibration is recommended in accordance with company quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
875mm Setting Gauge for Micrometers With Thermal Shield, Accuracy ±0.009mm, Ø16mm - Metav IndustryLine
Take advantage of a long-range setting standard that combines high repeatability, a compact 1.3 kg mass for easy handling, and integrated thermal protection to reduce measurement drift; order the gauge directly via Metav Werkzeuge or consult the specialists for application advice. Setting standard for micrometers M304.321.4 — 875 mm, ±0.009 mm accuracy (Metav IndustryLine) The M304.321.4 setting standard for micrometers is designed to provide a stable reference for calibrating and setting outside micrometers across long measuring spans, with thermal protection for consistent results in workshop conditions 875 mm nominal length ±0.009 mm rated accuracy Spherical measuring faces Integrated thermal protection Precise long-range reference for reliable setups This setting standard offers a nominal length of 875 mm combined with a rated accuracy of ±0.009 mm, which supports precise adjustment of long-range micrometers and reduces rework. The long nominal dimension is paired with a modest mass of 1.3 kg, enabling stable single-handed positioning while limiting thermal gradients. The numerical specification communicates measurable performance and facilitates quality planning and inspection routines. Stable contact design reduces measurement uncertainty The gauge uses spherical measuring faces, which ensure defined contact geometry when setting the faces of outside micrometers; this design reduces sensitivity to slight angular misalignment and makes the procedure more repeatable. The inclusion of thermal protection helps to mitigate temperature-induced expansion during typical workshop operations, so the reference length remains closer to its calibrated value and traceable measurements are easier to maintain. Practical benefits for production and quality control As a workshop-grade metrology accessory from Metav IndustryLine, this setting standard streamlines routine calibration tasks and supports faster changeovers by shortening the time required to establish a reliable zero. The clear numerical accuracy and robust construction make it suitable as an in-process reference for manufacturing lines, inspection benches and measuring rooms where reproducible settings translate directly into fewer scrap parts and higher throughput. For detailed suitability checks and to discuss delivery options for the M304.321.4 setting standard from Metav IndustryLine, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange expert assistance and next steps Technical data Article number: M304.321.4 GTIN: 4054469116822 Manufacturer: Metav IndustryLine Facts Nominal length: 875 mm Accuracy: ±0.009 mm Weight: 1.3 kg Diameter (D): 16 mm Customs tariff number: 90173000 Special features Spherical measuring faces With thermal protection Accessory for setting outside micrometers eClass: 21170102 FAQ What is the primary use of this setting standard? This setting standard is used as a length reference for setting and checking outside micrometers, providing a stable datum for long-range adjustments. Which accuracy can be expected when using the gauge? The gauge is specified with an accuracy of ±0.009 mm, which defines the maximum deviation of the reference length under the stated conditions. Are the measuring faces suitable for repeatable contact? Yes, the spherical measuring faces are designed to create defined contact points and improve repeatability when setting micrometer jaws. Is the gauge intended for workshop use or laboratory calibration? The design and features such as thermal protection make it well suited for workshop and production environments as a long-range reference for routine adjustments. What documentation is provided with the gauge? Standard delivery information and identification are included; for details about calibration certificates or traceability, consult the product specification offered by Metav IndustryLine Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87–100mm Three-Point Internal Micrometer 0.001mm Resolution With Setting Ring And 152.4×Ø23.5 Extension, In Case - Metav IndustryLine
The combination of three-point contact, 0.001 mm resolution and a supplied setting ring and extension ensures reproducible bore readings and efficient inspection routines; this robust measuring set is supplied in a protective case ready for workshop use. Order the M312.463 three-point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. M312.463 Three‑point internal micrometer (87–100 mm) — 0.001 mm resolution, Metav IndustryLine A three‑point internal micrometer M312.463 engineered for precise measurement of blind holes and internal bores in the 87–100 mm range, supplied with a setting ring and extension for extended reach. 0.001 mm resolution Three‑point contact for internal bores Includes setting ring and extension Supplied in protective case Repeatable, high‑precision internal measurements for production control The three‑point contact geometry provides a stable and centred measuring interface that reduces measurement scatter compared with single‑point probes; this results in repeatable bore diameter readings across successive checks. With an indication of 0.001 mm and an accuracy of ±0.005 mm, the instrument covers demanding inspection tasks where sub‑millimetre consistency is required. The matt‑chromed scale and vernier contribute to long‑term legibility, while hardened measuring faces protect the contact surfaces against wear, maintaining measurement integrity over time. Prepared for blind holes and extended‑depth bores Designed specifically for internal bores, the measuring set includes a setting ring (87 mm) for straightforward calibration and an extension rod set (152.4 × Ø23.5 mm) that increases usable reach for deeper blind holes. This configuration allows secure contact in bore bottoms without introducing tilting errors, so tasks such as quality control of castings or machined housings can be completed without additional fixtures. The combination of three‑point contact and tailored extensions simplifies alignment and reduces handling time during serial inspections. Workshop‑ready durability and secure transport Built for the shop floor, the instrument combines protective features and robust construction: the protective case ensures safe transport and storage, while the instrument’s mass and build quality contribute to stable handling during measurement cycles. The matt‑chrome finish on the scale and vernier resists glare and fingerprints, aiding quick, accurate reading under workshop lighting. These design choices reduce incidental downtime and support consistent metrology practice across shifts. Integrating precise bore checks into inspection workflows The metrological characteristics make this measuring set well suited to production monitoring and incoming inspection processes: fast repeat measurements with traceable calibration via the supplied setting ring streamline statistical process control routines. The instrument’s specification supports documented quality procedures and facilitates comparison against reference rings or master gauges. For companies seeking a dependable internal measuring solution, the M312.463 fits into established inspection plans without complex adaption. Contact Metav Werkzeuge for personalised advice on integrating the Metav IndustryLine M312.463 three‑point internal micrometer into existing measurement routines and to arrange delivery from Emmerich. Technical data Article number: M312.463 GTIN: 4054469182247 Manufacturer: Metav IndustryLine Facts Measuring range: 87–100 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Weight: 4.4 kg Setting ring: 87 mm Extension: 152.4 × Ø23.5 mm Special features Three‑point internal measurement Suitable for blind hole measurement Scale and vernier matt chrome‑plated Hardened measuring faces Supplied in a protective case FAQ What measuring range does the instrument cover? The three‑point internal micrometer M312.463 covers a measuring range of 87–100 mm, suitable for medium‑sized bores and housings. Is this instrument suitable for blind hole measurement? Yes, the M312.463 is specifically configured for blind hole measurement and includes an extension set to reach deeper bores reliably. What accuracy and resolution can be expected? The instrument provides a resolution of 0.001 mm with an accuracy of ±0.005 mm, delivering high repeatability for production checks. Does the measuring set include accessories for calibration and extended reach? The delivery includes a setting ring (87 mm) for calibration and extension rods (152.4 × Ø23.5 mm) to increase probe reach. How is the instrument delivered and protected for transport? The M312.463 is supplied in a protective case to ensure safe transport and secure storage between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–10mm Digital Three-Point Internal Micrometer, RB6 Spindle, Digital Readout mm/inch - Metav IndustryLine
Take advantage of the combination of fine resolution, reliable three‑point measurement and blind‑hole capability for consistent bore inspection; order the instrument directly via Metav Werkzeuge or request further advice from our consultants. Digital three‑point internal gauge M312.211 – 8–10 mm, RB 6 data output Digital three‑point internal gauge M312.211 is a compact, measurement‑grade instrument for precise internal diameter control in small bores and blind holes. Digital three‑point measurement, 8–10 mm range High accuracy: 0.004 mm tolerance RB 6 data output, mm/inch display functions Suitable for blind‑hole measurements Faster, repeatable bore checks with measurement-grade accuracy The digital three‑point concept provides a stable contact geometry that translates small bore variations into consistent readings. With a resolution of 0.001 mm and a stated accuracy of 0.004 mm, this device is suited to routine quality checks and final inspection tasks where reproducibility matters. The electronic readout, featuring ON/OFF/SET, HOLD and mm/inch functions, reduces interpretation errors and speeds up throughput compared with optical or analogue gauges. For production and inspection environments, this means fewer rechecks and clearer pass/fail decisions. Ergonomic handling that reduces measurement scatter Designed for efficient use in the workshop and calibration lab, the instrument combines tactile three‑contact sensing with a compact form factor and a modest weight of 0.7 kg, making it easy to position in confined setups. The three‑point contact stabilises the measurement axis and helps to minimise influences from off‑axis probing or uneven operator pressure. The delivery state is without a setting ring or extension, which keeps the unit compact for direct in‑machine or bench checks and avoids unnecessary accessories when measuring nominal bore sizes between 8 and 10 mm. Data capture and blind‑hole measurement capability Equipped with an RB 6 data output, the gauge integrates with data‑collection systems for traceable logging and statistical process control. The digital interface supports quick transfer of values into inspection software or SPC workflows, simplifying documentation and audit trails. The instrument is explicitly designed for blind‑hole (sackhole) measurements, where internal depth and access are limited; the three‑point geometry and digital readout together ensure reliable results even when direct visual inspection is not possible. Industrial metrology context and practical benefits Placed within industrial metrology, this three‑point internal gauge delivers a balance of precision and usability for component manufacturers, toolmakers and inspection labs. The compact measurement range and fine resolution make it especially useful for small‑bore components, precision assemblies and tooling checks. By combining robust mechanical sensing with a clear digital interface and standardised data output, the instrument supports efficient quality routines and reduces administrative overhead associated with manual logging. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine three‑point internal gauge M312.211 into existing inspection procedures or to request a quotation and technical guidance from our specialists Technical data Article number: M312.211 GTIN: 4054469169088 Brand: Metav IndustryLine Core technical data Measuring range: 8–10 mm Resolution: 0.001 mm Stated accuracy: 0.004 mm Weight: 0.7 kg Length: 45 mm TARIC/Customs code: 90173000 Special features Digital display with ON/OFF/SET, HOLD and mm/inch functions RB 6 data output for external logging Suitable for blind‑hole measurements Delivered without setting ring and without extension Category: three‑point internal bore gauge / micrometre‑type instrument FAQ What is the measuring range of this gauge? The gauge measures internal diameters from 8 to 10 mm, as specified for the Metav IndustryLine digital three‑point internal gauge M312.211. How fine is the display resolution and what accuracy can be expected? The instrument provides a 0.001 mm resolution on the digital display with a stated accuracy of 0.004 mm, suitable for routine production and inspection work. Can the gauge record measurements electronically? Yes. The device supports RB 6 data output, enabling integration with data‑collection systems for traceability and SPC workflows. Is this instrument suitable for blind‑hole measurements? Yes. The design is specifically intended for blind‑hole (sackhole) measurements, combining three‑point contact with a digital readout for reliable internal checks. Does the delivery include a setting ring or extensions? The gauge is supplied without a setting ring and without extensions, keeping the unit compact for direct bore inspections in the specified range. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–10mm Three-Point Inside Micrometer Self-Centering, Plastic Case - Metav IndustryLine
Take advantage of a compact, self-centring three-point measuring head and 0.004 mm accuracy to inspect blind bores with confidence; the instrument’s fine graduations and carbide measuring faces ensure repeatable results in precision workshops. Order directly via Metav Werkzeuge or consult our specialists for application advice. Three-point internal micrometer MS908.651 — self-centring three-point head, 8.0–10.0 mm range (Metav IndustryLine) A three-point internal micrometer designed for precise measurement of blind bores in fine mechanical and workshop environments Self-centring three-point head Carbide measuring faces for durability 0.004 mm measurement accuracy 0.001 mm reading increment Precision engineered for blind-bore measurement The compact three-point design centres automatically on the bore, so alignment errors are reduced and repeatability improves for series checks. The instrument combines a finely graduated analogue spindle with a 0.001 mm reading increment and a verified measurement accuracy of 0.004 mm, which supports quality-controlled machining and inspection routines. This level of reproducibility is particularly valuable when measuring short, deep blind bores where radial run-out and offset would otherwise distort results. Durable contact surfaces and compact ergonomics for workshop use Carbide-tipped measuring faces give long service life under frequent contact and resist wear from abrasive contaminants, maintaining measurement integrity over time. The micrometer’s compact form — overall length 54.5 mm — places it in the micro class for instruments intended for extremely compact, fine‑mechanical tasks; the short, stiff geometry helps to keep handling-induced deflection to a minimum and is ideal for toolrooms, gauges and precision workshops where space and access are limited. Simple analogue operation that integrates with quality processes As an analogue instrument with a clear mechanical spindle, the device delivers tactile feedback and fast, direct readings that can speed up routine inspections without reliance on batteries or electronics. The self-centring action and carbide faces reduce setup time and scrap, while the fine reading increment enables informed pass/fail decisions at the bench. For traceable documentation, the micrometer’s technical values support incorporation into existing inspection protocols and measurement logs. Enquire with Metav Werkzeuge for tailored application advice or to procure the Metav IndustryLine three-point internal micrometer MS908.651 for precision blind‑bore inspection Technical data Article number: MS908.651 Type: Three-point internal micrometer Manufacturer: Metav IndustryLine Facts Measurement range: 8.0–10.0 mm Minimum range: 8.0 mm Maximum range: 10.0 mm Accuracy: ±0.004 mm Reading increment: 0.001 mm Length: 54.5 mm Special features Self-centring three-point head Carbide measuring faces Analogue operation Setting ring: 8 Suitable for blind bores FAQ What measurement range does the instrument cover? The MS908.651 covers a range of 8.0–10.0 mm for internal measurements. How precise is the three-point internal micrometer? The instrument provides a measurement accuracy of ±0.004 mm with a reading increment of 0.001 mm. Are the measuring faces wear-resistant? Yes, the measuring faces are carbide tipped to ensure long-term durability and consistent contact behaviour. Is the device suitable for routine workshop checks of blind bores? The three-point centring head and compact geometry make the MS908.651 well suited to routine blind-bore inspections in toolrooms and precision workshops. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–10mm Three-Point Internal Digital Gauge With Setting Ring, IP65 - Metav IndustryLine
Take advantage of a compact, workshop-ready instrument that combines high resolution, robust ingress protection and practical accessories for blind-bore measurement; the device’s 0.001 mm display and IP65 rating ensure repeatable results in industrial environments. Order the M312.231.PN directly via Metav Werkzeuge or ask our consultants if needed. Digital three-point internal micrometer M312.231.PN — 8–10 mm, IP65 (Metav IndustryLine) The Digital three-point internal micrometer M312.231.PN is a precision instrument for fast, reproducible internal diameter checks in blind and through bores, designed for use in machine shops and quality control. Three-point internal measurement for blind bores Precision resolution 0.001 mm on digital display IP65 protection for workshop environments Includes setting ring and extension Repeatable three-point contact for reliable bore checks The three-point measuring head delivers a centred, self-centring contact around the bore, producing consistent results where single-contact gauges can tilt or misalign. Combined with the 0.001 mm display resolution and a stated accuracy of ±0.004 mm, this instrument minimises operator influence and speeds up inspection loops. For tasks such as control rounds on turned components or verification of reamed seats, the three-point concept reduces measurement scatter and shortens setup time compared with comparator methods. Built for workshop conditions and quick readout Rated IP65, the instrument tolerates splash and coolant exposure common at the machine spindle, keeping the electronics safe while maintaining measurement performance. The digital display includes ON/PRESET, mm/inch and HOLD functions for straightforward switching between units and temporary value capture; this supports faster data logging during batch inspections. The integrated data output type RB 6 allows connection to inspection systems or data collectors where traceback and process control are required. Practical scope and compatible accessories for blind-hole work With a measuring range of 8–10 mm, the tool sits in the compact "micro" class suited to fine mechanical work and confined bores where short anvils and low bending moments matter. It is supplied with a setting ring and a dedicated extension to reach deeper blind holes, enabling immediate use for common blind-bore checks without separate calibration fixtures. Conforming to DIN 863, the instrument fits established workshop routines and can be incorporated into formal quality checks on production lines. Integration into inspection routines and operator benefits The compact weight of 0.7 kg and the clear control layout reduce fatigue and handling errors during repetitive use. As a rational investment, the instrument lowers measurement variability and shortens throughput time in first-article inspection and in-process checks. For teams establishing traceable workflows, the combination of mechanical stability and digital readout supports both manual documentation and electronic data capture, helping to maintain consistent quality across shifts. For precision internal measurement from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for order and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M312.231.PN Label: Digital three-point internal measuring, 8–10 mm, IP65, incl. setting ring GTIN: 4054469179070 Category: Messschrauben (micrometers) Facts Measuring range: 8–10 mm Maximum measuring range: 10 mm Resolution / display: 0.001 mm Accuracy: ±0.004 mm Weight: 0.7 kg Protection class: IP65 Tariff number: 90173000 Special features Digital display with ON/PRESET, mm/inch and HOLD Data output: RB 6 Conforms to DIN 863 Includes setting ring and extension (100xØ5,8) Suitable for blind-hole measurements FAQ What measuring range does this instrument cover? The M312.231.PN covers an internal measuring range from 8 to 10 mm and is categorised in the compact micro class for fine mechanical work. How precise is the digital readout? The digital display on this Metav IndustryLine internal micrometer shows 0.001 mm increments with a stated accuracy of approximately ±0.004 mm, suitable for tight workshop tolerances. Can this tool measure blind bores? Yes, the device is specifically prepared for blind-hole measurement and is supplied with a setting ring and extension to reach and verify such features reliably. Is the instrument suitable for use at the machine? The IP65-rated design of the instrument enables operation in splash-prone workshop environments, protecting the electronics during routine machine-side inspections. How can measurement data be exported? The M312.231.PN offers an RB 6 data output for connection to data collectors or inspection systems to support documented quality control workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–10mm Three-Point Internal Measuring Instrument With Setting Ring, DIN 863, Supplied In Case - Metav IndustryLine
Take advantage of the combination of compact micro‑range measuring, stable three‑point contact and DIN‑compliant vernier control to secure reproducible internal measurements; order the instrument directly via Metav Werkzeuge or request specialist advice from our consultants. Three‑point internal micrometer M312.131 — 8–10 mm range, three‑point contact (Metav IndustryLine) The three‑point internal micrometer M312.131 is a micro‑range measuring instrument designed for accurate internal diameter checks and blind‑hole measurements in precision workshops and small‑part metrology. Three-point contact for stable internal measurement Measuring range 8–10 mm for micro applications DIN 863 vernier scale, matt chrome finish Micro‑range precision where tight tolerances matter The instrument belongs to the micro‑range class (max. 10 mm), making it suited to fine mechanical work where compact geometry and low deflection are crucial. Its three‑point contact system centres reliably in the bore, reducing eccentricity and permitting repeatable results even on short depths. With a stated accuracy of ±0.004 mm, the device provides a clear rational advantage for small‑part inspection: fewer rejects, faster set‑up and confidence when verifying bores for precision assemblies. The M312.131 is therefore appropriate for watchmaking, micromechanics and sample inspection in quality control. Reliable measurement of blind holes and short bores Built specifically to address internal measurements in restricted geometries, the instrument is fitted for blind holes, enabling consistent readings where standard callipers or telescoping gauges struggle. An adjustable ring facilitates fine setting of the contact span for small increments within the 8–10 mm range, so each check can be adapted without disassembly. The three‑point principle spreads contact forces evenly, which reduces deformation of soft components and enhances reproducibility in serial checks. Clear vernier reading and durable scale finish The scale and vernier are matt chrome plated, providing a non‑reflective surface for easy reading under workshop lighting and improved resistance to wear. The vernier offers a fine reading of 0.001 mm, enabling operators to resolve small differences at the micro scale; this enhances process control when aligning parts or setting fixtures. The mechanical construction prioritises a positive tactile feel at the spindle, supporting controlled measuring pressure and consistent operator technique for routine inspections. Workshop suitability and standards conformity Manufactured to DIN 863, the instrument meets recognised metrological conventions for analogue vernier measuring tools and is immediately usable on the shop floor. Its compact body (length 55 mm) and straightforward operation make it a practical addition to bench measurement kits. Supplied in a transport case, the unit is protected for transit and temporary storage — a pragmatic solution when instruments are moved between workstations or taken to inspection points. Metav’s approach to democratising precision ensures that this tool combines established design with workshop‑oriented practicality. Secure micro‑range accuracy with Metav IndustryLine’s M312.131 — contact Metav Werkzeuge for tailored technical advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M312.131 GTIN: 4054469119441 Tariff code: 90173000 eClass: 21170335 ETIM: EC003590 Numbers / Core technical data Measuring range: 8–10 mm Measuring range max: 10 mm Measuring range min: 8 mm Accuracy: ±0.004 mm Reading / resolution: 0.001 mm Length: 55 mm Standard: DIN 863 Special features / Versions Three‑point internal measurement Adjustable ring for fine setting (einstellring 8) Scale and vernier matt chrome plated Analogue vernier instrument Suitable for blind‑hole measurement Supplied in a transport case FAQ How small a bore can this instrument measure accurately? The M312.131 is specified for an 8–10 mm measuring range and is optimised for precise work within that micro‑range. Is the device suitable for blind‑hole measurements? Yes — the instrument is designed for blind holes, with a three‑point contact system and an adjustable ring that permit stable readings in short or partially closed bores. What reading resolution and accuracy can be expected? The vernier provides a 0.001 mm reading capability and an overall accuracy of ±0.004 mm, offering high resolution for small‑part inspection. Does the instrument conform to any metrological standard? The micrometer is produced in accordance with DIN 863, ensuring compatibility with established analogue vernier measuring practices. How is the instrument delivered for transport and storage? The instrument is supplied in a transport case to protect it during transit and temporary storage between workstations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–10mm Three-Point Internal Micrometer 0.001mm With Setting Ring And Extension, In Case - Metav IndustryLine
Take advantage of precise three‑point centring and a 0.001 mm readout together with a compact extension set to inspect blind bores reliably; the instrument’s repeatable accuracy of ±0.004 mm reduces scrap and rework in component production. Order the three‑point internal micrometer directly via Metav Werkzeuge or contact their consultants for application advice. M312.431 — Three‑point internal micrometer (8–10 mm, 0.001 mm) by Metav IndustryLine The M312.431 is a three‑point internal micrometer designed for precise measurement of blind bores and small internal diameters in the 8–10 mm range. Three‑point contact for secure centring 8–10 mm range with 0.001 mm readout Accuracy ±0.004 mm for consistent results Supplied in a protective case with extension Accurate centring for dependable bore inspection The three‑contact measuring head provides a stable, concentric contact with internal surfaces; the three‑point contact geometry minimises eccentricity and delivers a repeatable measurement even in shallow or slightly tapered bores. With a 0.001 mm resolution and a stated reproducibility of ±0.004 mm, this instrument supports tight tolerance control in small components and quality checks without the need for complex set‑ups. The fine readout allows detection of minute deviations that would otherwise lead to component rejection or costly rework. Robust construction and workshop practicality Scale and vernier are matt chrome‑plated, combining corrosion resistance with low glare for straightforward reading under workshop lighting. The supplied setting ring (8 mm) and the extension rod (101.6 × Ø5.8 mm) extend the functional reach while keeping alignment intact, so even hard‑to‑reach blind holes can be measured reliably. At approximately 0.6 kg, the instrument balances solidity with manageable handling; the protective case ensures safe storage and transport between inspection benches and production cells, preserving calibration and head geometry. Purpose‑built for production and inspection environments Designed for routine shop‑floor metrology, the instrument is particularly suitable for checking blind bores in assemblies, small housings and precision turned parts. The three‑point head expands to contact the bore uniformly, meaning fewer measurement iterations and faster decision cycles in incoming inspection or in‑process control. Traceable identification (GTIN provided) and the compact case make it simple to integrate the tool into a controlled inspection workflow, supporting stable quality outcomes across batches. Contact Metav Werkzeuge for tailored advice and stock availability of the Metav IndustryLine three‑point internal micrometer M312.431 — specialists in precision tools and workshop supplies from Emmerich to your bench Technical data Article number: M312.431 GTIN: 4054469182131 Manufacturer: Metav IndustryLine Core dimensions & tolerances Measurement range: 8–10 mm Resolution / reading: 0.001 mm Stated accuracy / reproducibility: ±0.004 mm Weight: 0.6 kg Materials & special features Scale and vernier: matt chrome‑plated Setting ring: 8 mm Extension rod: 101.6 × Ø5.8 mm Supplied in protective case Suitable for blind‑hole measurements FAQ How does the three‑point head improve measurement of blind bores? The three‑point contact in the M312.431 centres itself within the bore and distributes contact evenly, reducing eccentricity and giving a more reliable internal diameter measurement than single‑point probes. Is the instrument suitable for very shallow blind holes? Yes. The combination of the three‑point head and the included extension allows the M312.431 to reach and measure shallow blind bores while maintaining concentric contact. What level of repeatability can be expected in workshop conditions? Repeatability around ±0.004 mm is specified for this micrometer; stable handling, correct seating and the use of the setting ring help achieve that performance consistently. Does the supply include protective storage and accessories? The M312.431 is supplied in a protective case and includes the setting ring and extension rod for practical use and safe transport. Can this instrument replace small bore gauges in incoming inspection? For the 8–10 mm range, the three‑point internal micrometer offers a compact, precise alternative for production and inspection tasks where direct traceable readings are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–10mm Three-Point Internal Micrometer Digital Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Benefit from full traceability, ISO 17025 calibration and a colour touchscreen combined with Wireless + USB data transfer for fast, reliable internal measurements. Take advantage of the ergonomic pistol‑grip and ±0.003 mm accuracy for stable, repeatable inspection results. Order the three‑point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three-point internal micrometer — pistol‑grip with colour touchscreen (Microtech Metrology) The Three‑point internal micrometer is a compact, pistol‑grip instrument designed for highly accurate internal diameter measurement in micro‑mechanical assemblies and precision engineering. ISO 17025 calibration certificate included Wireless + USB data transfer Colour 1.54" touchscreen display High accuracy ±0.003 mm Traceable precision for micro‑scale bores The instrument delivers traceable results through an included ISO 17025 calibration certificate, making it suitable for inspection tasks where documented conformity is required. With a measurement range classified as micro (8–10 mm) and a declared accuracy of ±0.003 mm, the device meets the demands of micro‑mechanical work such as watch components, small bearings and precision fittings. The digital readout with resolution 0.0001 mm shortens read‑and‑record cycles and reduces transcription errors, supporting more efficient quality workflows and fewer repeat measurements. Ergonomic handling and consistent centring Built around a three‑point measuring principle, the micrometer self‑centres in small bores to reduce eccentricity and improve repeatability compared with single‑point gauges. The pistol grip improves operator comfort and stabilises hand force during measurement, while the adjustment ring included allows fine setting of the measuring force and zeroing. The instrument’s measuring depth 50+100 mm enables access to recessed features in small assemblies, preserving both reach and stiffness for reliable readings across the specified range. Seamless data capture for inspection systems Data output is provided via Wireless + USB, enabling direct transfer into inspection software or spreadsheets and simplifying statistical process control. The Colour 1.54" touchscreen presents clear values and menus, speeding setup and reducing operator training time. As a digitally enabled instrument, it supports modern production environments where measurement data must be quickly transferable and auditable. The combination of a compact form factor and digital connectivity improves throughput in repetitive test cycles and lowers the risk of documentation gaps during incoming inspection or in‑process checks. For traceable internal measuring with Microtech Metrology instruments, contact Metav Werkzeuge for purchase and configuration support — Metav Werkzeuge is happy to advise from its Emmerich location; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 133501010 (SKU) GTIN: 4061905041747 Manufacturer: Microtech Metrology Digital indicator: Colour 1.54" touchscreen Facts Measurement range: 8–10 mm Resolution: 0.0001 mm Accuracy: ±0.003 mm Measuring depth: 50+100 mm Special features Three‑point measuring principle Wireless + USB data output Pistol grip ergonomics Adjustment ring included ISO 17025 calibration certificate included Digital instrument FAQ Is the instrument delivered calibrated? Yes. The three‑point internal micrometer is supplied fully calibrated with an ISO 17025 calibration certificate, ensuring documented traceability for audit and quality control. What measurement range and applications suit this micrometer? The device covers 8–10 mm and falls into the micro class for precision work; it is intended for small bores in watchmaking, precision components and fine mechanical assemblies. How accurate and readable are the measurements? Declared accuracy is ±0.003 mm with a readout resolution of 0.0001 mm, suitable for demanding workshop and inspection tasks where sub‑hundred‑micrometre accuracy is required. Which data interfaces are available for integration? Measurement data can be exported via Wireless + USB, allowing straightforward connection to inspection software, SPC systems or data loggers. What accessories or fittings are included? The instrument includes an adjustment ring for fine setting; the pistol‑grip format and digital display are integrated features, and the device is supplied with the ISO 17025 calibration certificate. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
8–12mm Three-Point Internal Digital Gauge, Two Heads, IP65, Extension, Setting Ring - Metav IndustryLine
Benefit from precise three‑point measurement, industrial protection and an intuitive digital display — the ideal combination for reliable bore inspection and repeatable results. With a measuring depth of 55 mm and an included extension and setting ring, workflow interruptions are reduced; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. M312.284.PN — Digital three‑point internal micrometer, IP65, 8–12 mm The M312.284.PN is a digital three‑point internal micrometer designed for accurate measurement of small bores and blind‑hole applications in production and quality control. IP65‑rated for workshop environments High resolution: 0.001 mm reading Suitable for blind‑hole measurements Includes extension and setting ring Reliable three‑point measurement for repeatable bores The device uses a three‑point contact principle that centres automatically in the bore, reducing eccentricity and delivering stable values even in short or blind holes. The instrument covers an effective measuring range of 8–12 mm (arranged as two heads for 8–10 mm and 10–12 mm), offers a display resolution of 0.001 mm and an operational accuracy of ±0.004 mm. Compliance with DIN 863 ensures the device fits into established inspection routines, making it suitable for serial checks and in‑process control where small diameter tolerances matter. Robust design for daily shop‑floor use Built to withstand industrial conditions, the micrometer carries an IP65 rating that protects the electronics against dust and water jets, so measurements remain reliable near machining centres. The instrument’s measuring depth of 55 mm and a supplied 100 mm extension extend its reach into deeper bores while preserving stability. At 1.8 kg, the unit balances mass for steady handling with manoeuvrability on the bench — the included setting ring speeds calibration and repeat setup, cutting downtime between batches. Fast readout and traceable data capture A clear digital display offers ON/PRESET, mm/inch selection and a HOLD function for convenient readings in awkward positions. Data output via RB 6 enables straightforward connection to SPC systems or handheld loggers, supporting automated data collection and traceability. Two measuring heads reduce tool changes for adjacent diameter ranges, while the preset capability and the supplied adjustment ring allow rapid setup, helping to increase throughput and lower scrap rates in high‑mix production. Contact Metav Werkzeuge in Emmerich for a technical consultation on the M312.284.PN and to arrange delivery or tailored measurement solutions Technical Data SKU: M312.284.PN GTIN: 4054469179254 Manufacturer: Metav IndustryLine Core technical data Measuring range: 8–12 mm (8–10 mm + 10–12 mm) Resolution: 0.001 mm Accuracy: ±0.004 mm Measuring depth: 55 mm Extension length: 100 mm Protection class: IP65 Weight: 1.8 kg Standard: DIN 863 Features and accessories Digital display with ON/PRESET, mm/inch and HOLD Two measuring heads for adjacent ranges Three‑point internal measuring principle Data output: RB 6 Supplied with setting ring and extension Suitable for blind‑hole measurements FAQ How accurate is the measurement with this three‑point instrument? The M312.284.PN delivers an operational accuracy of ±0.004 mm and a display resolution of 0.001 mm, suitable for fine bore inspection and routine quality control in production. Can the device be used in wet or coolant‑rich environments? Yes. The M312.284.PN carries an IP65 rating, offering protection against dust and water jets so it is appropriate for use near machining centres and coolant zones. Is this tool suitable for blind‑hole bores? The instrument is specifically designed for blind‑hole measurements and includes extensions and a setting ring to reach and calibrate shallow and deeper blind holes. How can measurement data be exported for SPC? Data is exported via the RB 6 interface, enabling simple connection to SPC systems or handheld data collectors for traceable logging of bore measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90-100mm Three-Point Internal Micrometer Self-Centering, 0.006mm Accuracy, Supplied in Case - Metav IndustryLine
Take advantage of the combination of self‑centring three‑point measurement, a fine reading of 0.005 mm and an accuracy of 0.006 mm for consistent internal measurements; supplied in a protective transport case and available via Metav Werkzeuge for immediate delivery or technical consultation. Three‑point inside micrometer (M836.718) – self‑centring head, 0.005 mm reading (Metav IndustryLine) Three‑point inside micrometer (M836.718) is an analogue internal measurement instrument designed for precise bore and internal diameter checks in fine mechanical applications, combining a self‑centring measuring head with a high‑resolution vernier reading. Self‑centring three‑point measuring head Analogue vernier reading 0.005 mm Accuracy 0.006 mm for repeatable measures Supplied in protective transport case Precision in confined spaces for fine mechanical work The instrument targets the micro measurement class (measuring range 90–100 mm), making it especially suitable where compact geometry and high repeatability are required. The three‑point head automatically centres inside bores, reducing alignment error and shortening setup time compared with multi‑step probing. With a reading of 0.005 mm and an operational accuracy of 0.006 mm, the device supports tasks that demand sub‑millimetre certainty without the complexity of digital electronics. The construction emphasises steady contact through dedicated measuring faces, which stabilise the contact points and yield consistent results during sequential checks. Robust handling and workshop readiness Designed as an analogue vernier instrument, the micrometer offers tactile control and immediate legibility for workshop environments where quick validation of internal diameters is needed. The analogue vernier avoids battery dependence while delivering fine resolution, and the compact geometry preserves stiffness across the measuring span. Delivery in a protective transport case ensures safe storage and reduces the risk of damage in transit, which supports long‑term dimensional stability and repeatability in production or inspection routines. These traits translate into fewer remeasurements and a smoother quality workflow for bench‑level metrology. Practical integration into quality processes The combination of self‑centring functionality and precise vernier reading makes this instrument a pragmatic choice for incoming inspection, in‑process checks and small‑batch quality assurance. Its classification in the micro range means it complements existing calipers and plug gauges by covering internal measurement tasks where a direct, mechanical result is preferred. The simple mechanical operation allows straightforward training for workshop personnel, while the instrument's construction supports routine maintenance and traceable measurement records within established inspection protocols. Contact Metav Werkzeuge in Emmerich for specific availability, application advice and to arrange purchase details for the Metav IndustryLine three‑point inside micrometer M836.718 Technical data Article number: M836.718 GTIN: 4061905040726 Eclass: 21170335 ETIM: EC003590 Brand: Metav IndustryLine Facts Measuring range: 90–100 mm Reading: 0.005 mm Accuracy: 0.006 mm Display type: Analogue (vernier) Special features Three‑point, self‑centring measuring head Measuring faces present Supplied in protective transport case Suited to micro range precision work (10–100 mm) Category: Inside micrometer / internal measurement instrument FAQ What measuring range does the instrument cover? The three‑point inside micrometer M836.718 covers a measuring range of 90–100 mm and is designed for internal diameter measurements within that span. What resolution and accuracy can be expected? Resolution is provided by the analogue vernier with a reading of 0.005 mm; the specified accuracy for the instrument is 0.006 mm, as stated for the Metav IndustryLine three‑point inside micrometer M836.718. How does the self‑centring head improve measurements? The self‑centring three‑point head automatically aligns with the bore axis, reducing operator alignment error and improving repeatability when measuring internal diameters with the Metav IndustryLine M836.718. Is a protective case included with delivery? Yes, the instrument is supplied in a protective transport case to safeguard the measuring faces and maintain dimensional stability during storage and transport. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com