Ausstattungen für Fräsmaschinen

Take advantage of the combination of stable dual-voltage operation and compact, lightweight construction to ensure consistent halogen illumination with minimal downtime; order the unit directly via Metav Werkzeuge or consult our team for compatibility and stock confirmation. V-B15 Transformer and Bulb — Dual-voltage 12V/50W or 24V/50W, Vertex The V-B15 Transformer and Bulb is a compact replacement unit for VHL halogen lamps, designed to provide reliable 50 W illumination in inspection and task-lighting applications. Dual voltage: 12V or 24V 50 W halogen output Compact, lightweight design Consistent power delivery for reliable halogen light The combination of a dedicated transformer and matched halogen bulb ensures a steady light output at either 12 V or 24 V, both rated at 50 W, which reduces flicker and maintains luminous consistency during demanding tasks. This technical pairing benefits precision work where stable illumination supports accurate visual inspection and reduces rework. The integrated arrangement also simplifies replacement logistics compared with sourcing separate components, making maintenance cycles more efficient. Small form factor that minimises downtime and fits confined fixtures Weighing only 0.009 kg, the unit’s compact footprint allows quick installation in fixtures designed for VHL lamps. The small mass and compact profile mean less strain on mounting fittings and faster handling during lamp changes, which translates directly into shorter service intervals and lower indirect labour costs. The modest size also helps when retrofitting into machines or stands with limited space, enabling a tidy installation without major modifications. Clear compatibility and straightforward operating notes for workshop use Designed specifically for use with VHL halogen lamps, the unit is supplied by Vertex and is identifiable by SKU V-B15 and GTIN 4061905084447. For correct operation, the selected voltage must match the fixture and wiring; the transformer–bulb assembly is available in either 12 V / 50 W or 24 V / 50 W variants to suit different systems. When replacing the lamp, allow the bulb and transformer to cool before handling and ensure connections are secure. Metav’s stock handling and distribution from Emmerich provide a dependable supply chain, reducing lead times and supporting uninterrupted workshop operations. Contact Metav Werkzeuge in Emmerich for stock confirmation and technical advice on the V-B15 transformer and bulb — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-B15 GTIN: 4061905084447 eClass: 27039101 Facts Weight: 0.009 kg Voltage / wattage: 12 V / 50 W; 24 V / 50 W Special features Compatible with VHL halogen lamp Brand: Vertex Images available: V-B15-main.png, V-B15-detail.png FAQ What voltage options are available for this transformer and bulb? The V-B15 transformer and bulb is available in two variants: 12 V / 50 W and 24 V / 50 W, allowing selection according to the fixture’s requirements. Is this unit compatible with VHL halogen lamps? Yes, the unit is specifically designed for compatibility with VHL halogen lamps and is supplied as a matched transformer-and-bulb assembly. How should the bulb be replaced to ensure safe operation? Allow the bulb and transformer to cool before touching, use appropriate gloves to avoid oil contamination, and ensure the correct voltage variant is fitted and electrical connections are secure. What identifies the product for ordering and stock checks? Order or request stock with SKU V-B15 or GTIN 4061905084447; the unit is supplied under the Vertex brand and listed in eClass 27039101. Is the unit suitable for tight or confined fixtures? Yes, the compact and lightweight design makes the assembly suitable for fixtures with limited space, facilitating retrofit and maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, energy-efficient LED unit with a 6W output and a reinforced 220 x 310 mm arm to improve inspection accuracy and reduce repositioning time; order the lamp directly via Metav Werkzeuge or ask for specification advice from our consultants. VLED-30M reinforced LED inspection lamp — 6W output, 220 x 310 mm arm (Vertex) A reinforced VLED-30M LED lamp designed for precise task illumination at inspection benches and production workstations. 6W LED light output for clear illumination Reinforced arm 220 x 310 mm for stable positioning Compatible with 220 V mains supply Robust build at 1.8 kg for industrial use Precise, energy-efficient illumination for inspection tasks The lamp delivers a 6W LED output operating from a standard 220 V mains supply while providing a low-voltage 12 V light source, combining safety with consistent brightness. The low-power LED design ensures energy-efficient operation and long service intervals compared with halogen alternatives. For quality control stations and visual inspection tasks, the stable light output supports reliable defect detection and reduces the need for repeat checks, contributing to smoother production flow and better throughput. Stable positioning that supports repeatable results An articulated arm measuring 220 x 310 mm and a reinforced support structure allow accurate placement and repeatable alignment across inspection cycles. The lamp’s mass (approximately 1.8 kg) contributes to mechanical stability, reducing vibration and drift during fine visual tasks. This stability translates into less operator fatigue and fewer readjustments, which is particularly advantageous in high-precision environments such as metrology benches, electronics assembly and small-part inspections. Built for workshop environments and simple integration The compact head and steady mounting geometry make the light unit suitable for integration beside microscopes, measuring fixtures and assembly jigs where localised illumination is required. The robust construction supports frequent handling and repositioning typical in busy workshops without compromising beam consistency. Clear, shadow-free illumination helps to speed up visual inspection and enhances the reliability of manual measurements and visual checks. Trusted sourcing and practical advantages for procurement Sourcing the unit from an established supplier reduces procurement risk: the lamp is a Vertex product and is listed with a clear SKU for ordering, streamlining stock control and replacement planning. Metav’s offering emphasises availability from the Emmerich warehouse, where quality is vetted for the European market; this supports predictable lead times and consistent restocking for production-critical lighting equipment. Contact Metav Werkzeuge in Emmerich for specification support on the Vertex VLED-30M and to confirm suitability for inspection benches — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VLED-30M Manufacturer: Vertex GTIN: 4061905094705 Eclass: 27110640 ETIM: EC001959 Facts Power supply: 220 V Light output: 12 V / 6 W Arm dimensions: 220 x 310 mm Weight: 1.8 kg Special features Reinforced version (verstärkt) Designed for workshop and inspection use SKU: VLED-30M FAQ What type of light source does the lamp use? The lamp uses a 6W LED light source; the Vertex VLED-30M provides a low-voltage 12 V output supplied from a 220 V mains input for consistent illumination. Is the arm suitable for precise positioning? Yes, the reinforced 220 x 310 mm arm on the VLED-30M provides stable positioning for repeatable inspection alignment and reduced vibration. Can the lamp be used on inspection benches beside microscopes? The compact head and steady mounting geometry of this Vertex lamp make it suitable for use alongside microscopes and measuring fixtures where localised, shadow-free illumination is required. How heavy is the unit and what does that mean for durability? At approximately 1.8 kg, the lamp offers a substantial feel that contributes to mechanical stability and resilience during frequent repositioning. Is this a Vertex product and is there an SKU for ordering? Yes, the lamp is a Vertex product listed under SKU VLED-30M, which simplifies ordering and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of high-strength cast steel construction and 0.01 accuracy for stable, repeatable right‑angle clamping; secure production quality and reliable set‑up stability. Order the angle plate directly via Metav Werkzeuge or ask our consultants for application advice. VR-1212 Angle Plate — precision right‑angle clamping in high‑strength cast steel VR-1212 is an angle plate designed for secure right‑angle clamping and repeatable machining setups in industrial workshops. High-strength cast steel construction Precision to 0.01 for repeatable setups Robust 42.9 kg base for stability Compact 12 x 12 x 12" footprint Consistent precision for demanding machining work The solid, high-strength cast steel body delivers dimensional stability that supports repeatable results in serial production. With an accuracy of 0.01, the component provides a verifiable baseline for right‑angle clamping and alignment tasks; this level of precision reduces the need for frequent re‑setting and helps maintain tolerances across batches. For those less familiar with metrology terms, accuracy 0.01 denotes a very small permissible deviation from the nominal right angle, ensuring components are clamped true to the machine axis and minimise rework. Stability that reduces vibration and movement A mass of 42.9 kg creates inertia that resists cutting forces and dampens vibration during milling and drilling operations. The heavy base contributes to a stable clamping platform, meaning tools and workpieces remain secure under load and surface finish improves as a direct consequence. In practice, a substantial base weight reduces micro‑movement and supports longer tool life, which in turn improves process economy in busy production environments. Integrating the angle plate into workshop workflows Engineered for fixture use on machine tables and in inspection stations, this angle plate simplifies set‑up times when paired with standard clamping elements. The robust material and precise faces allow the plate to serve as a repeatable datum for jigs and measuring operations. As part of a broader clamping strategy, the component supports quicker changeovers and consistent part quality, contributing to higher throughput and reduced downtime across shifts. Practical handling and upkeep for long service life Routine inspection of contact faces and a light cleaning regime preserve the precision and surface condition of the plate. The cast steel construction is durable but benefits from corrosion protection in humid environments; occasional lubrication of clamping interfaces and safeguarding of mounting surfaces will keep the plate performing to specification. When integrated into regular maintenance cycles, the tool extends its operational life and sustains the repeatability required for precision production. Contact Metav Werkzeuge in Emmerich to discuss how the Vertex VR-1212 angle plate can improve machining stability and process repeatability — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and local supply Technical data SKU: VR-1212 GTIN: 4061905092329 eClass: 21170130 Facts Dimensions: 12 x 12 x 12" Weight: 42.9 kg Accuracy: 0.01 Special features Material: high-strength cast steel Product images available FAQ What materials is this angle plate made from? The angle plate is manufactured from high‑strength cast steel, chosen for its dimensional stability and rigidity in machining applications. How precise is the VR-1212 for setup and alignment? The VR-1212 offers accuracy of 0.01, providing the repeatability needed for precise right‑angle clamping and consistent part quality. Is the plate suitable for heavy cutting operations? With a mass of 42.9 kg, the plate provides substantial stability and damping for many machining tasks; suitability for specific cutting forces should be assessed against the machine and clamping system in use. Can the angle plate be used as a datum in inspection fixtures? Yes, the precision faces and rigid construction make it suitable as a repeatable datum for inspection and jigging applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, robust guide-rail block that combines precise dimensions, machinable S45C steel and a threaded M4 fixing for reliable fixture assembly; order components directly via Metav Werkzeuge or request specialist advice from the consultants. Block 12TO12 – Guide-rail block, compact 12 × 20 × 10 mm (Vertex) A Block 12TO12 engineered as a compact guide-rail block for precise positioning and secure mounting in fixtures and small-scale assemblies Compact dimensions 12 x 20 x 10 mm Machined from S45C structural steel Threaded T-slot M4 for secure mounting Supplied as a set of 4 components Precise alignment in minimal space The compact 12 x 20 x 10 mm footprint delivers accurate positioning where space is restricted, ensuring consistent alignment without bulky hardware. Manufactured from S45C, a medium-carbon steel known for its machinability and strength, the component provides a stable base for repetitive operations and light assembly tasks. The design focuses on dimensional consistency and precision, reducing set-up time and minimising the need for frequent re-adjustments in jigs and fixtures. Secure fixing and straightforward integration A threaded T‑slot with M4 engagement enables direct, vibration-resistant fastening to standard guide rails and carrier plates. Supplied as a set of 4, the components simplify procurement for multi-point installations and replace worn blocks in matched groups to maintain parallelism. At 0.07 kg per block the low mass aids handling and keeps dynamic loads low, which benefits automated or semi-automated setups where minimised moving mass improves cycle stability. Robust performance for workshop use Designed for everyday workshop and light industrial environments, the block combines a machinable base material with a finish suitable for sliding and clamping applications on guide rail systems. The construction balances wear resistance with the ability to be reworked or adapted on conventional machine tools, supporting long service life and straightforward maintenance. The Vertex provenance signals consistent production standards, while compatibility with common mounting conventions keeps integration predictable and efficient. For technical clarification or to discuss suitability of Vertex components for specific fixtures, contact Metav Werkzeuge for expert guidance via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 12TO12 GTIN: 4061905084003 eClass: 23300402 Core specifications Dimensions: 12 x 20 x 10 mm Weight: 0.07 kg Mounting thread: M4 T-slot Pieces per set: 4 Materials & features Material: S45C Intended use: for guide rail applications Supply configuration: set of 4 Manufacturer: Vertex FAQ What is the primary application of this block? The Vertex Block 12TO12 is intended as a compact guide‑rail block for positioning and secure mounting in fixtures, jigs and small assemblies. Is the block sold individually or as a set? The component is supplied as a set of 4, allowing immediate multi-point installation or matched replacements. Which material is used and what are the benefits? Made from S45C, the block offers a balance of machinability and tensile strength, making it suitable for workshop machining and rework if required. Which thread and mounting standard does it use? The block features a threaded T‑slot with M4 engagement, compatible with common guide‑rail fastening practices. Can the block be used on non-ferrous rails such as aluminium? The Vertex Block 12TO12 is primarily specified by material and thread; compatibility with aluminium or other rail materials depends on the assembly design and is typically achievable with appropriate fasteners and surface treatments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a robust right-angle design, high-strength cast steel construction and substantial mass ensures stable, vibration-damped clamping for machining and inspection tasks; order the component directly via Metav Werkzeuge or consult the technical team for application advice. VR-120 angle plate by Vertex — high-strength cast steel, stable right-angle support The VR-120 angle plate provides stable right-angle clamping for machining, inspection and setup operations in metalworking and precision workshops. Robust high-strength cast steel construction Stable mass for vibration damping Right-angle accuracy for fixture alignment Compact footprint: 12 x 8 x 9" Stable clamping for consistent machining results The angle plate is engineered to deliver consistent right-angle support, translating into repeatable setups and fewer repositioning steps during production. Made from high-strength cast steel, the component's mass and rigidity reduce chatter and improve surface finish when used as a fixed clamping reference. For workshop managers and process engineers, this means more predictable cycle times and reduced scrap rates. The right-angle geometry supports perpendicular workholding and simplifies alignment when combining multiple fixtures. Durability that lowers maintenance effort A construction based on high-strength cast steel brings resistance to deformation and long service life under regular machining loads. The material choice offers high dimensional stability and contributes to maintenance intervals that are easier to plan and predict. This robustness supports continuous production environments and reduces the likelihood of unplanned downtime related to fixture wear. The solid design also aids in repeatable measuring and inspection tasks where fixture stability is critical. Improved precision handling and integration into workflows The component's design yields precision benefits in setup and inspection workflows: repeatable fixturing reduces measurement uncertainty and accelerates changeover between parts. The compact footprint (12 x 8 x 9") and mass of 19.4 kg ensure the plate stays anchored during clamping operations, while the right-angle faces provide reliable datum surfaces for jigs and gauges. Integrating the plate into modular fixturing systems supports lean production by simplifying reference transfer between machines and inspection benches. Contact Metav Werkzeuge today for tailored advice on integrating Vertex's VR-120 angle plate into production or inspection workflows and benefit from our Emmerich-based quality filter and logistics expertise Technical data SKU: VR-120 GTIN: 4061905094576 Manufacturer: Vertex Facts Weight: 19.4 kg Dimensions: 12 x 8 x 9" ECLASS: 21020601 Special features Material: high-strength cast steel Designation: Angle plate (Aufspannwinkel) FAQ What is the primary purpose of this angle plate? The VR-120 angle plate by Vertex is designed as a right-angle clamping reference for machining, inspection and fixture setups, providing stable perpendicular surfaces for accurate workholding. What material is used for the construction? The component is manufactured from high-strength cast steel, chosen for rigidity and long-term dimensional stability. What are the physical dimensions and mass of the plate? Dimensions are 12 x 8 x 9" with a mass of 19.4 kg, giving the plate sufficient weight for vibration damping and stable clamping. Can the plate be used for inspection as well as machining? Yes, the VR-120 supports inspection applications by offering reliable datum surfaces and stable mounting for gauges and measuring tools. How does the design influence production efficiency? The right-angle geometry and solid construction reduce setup time and repositioning, improving throughput and repeatability in machining and measuring operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the Ø43×0.6×25 mm precision with a lightweight 0.16 kg profile to ensure straightforward integration into milling assemblies; the Vertex component delivers consistent mechanical behaviour and is available via Metav Werkzeuge for reliable European supply. Order the part directly through Metav Werkzeuge or consult their specialists if further application details are required. VSP-R8 Torsion Spring for milling machines — Ø43×0.6×25 mm | Vertex The VSP-R8 is a torsion spring intended for use in milling machines, engineered to provide a compact, precision-controlled rotational force for mechanical subassemblies. Compact precision dimensions Ø43×0.6×25 mm Designed for milling machines Lightweight 0.16 kg for easy handling Proven Vertex component quality Precise fit that reduces setup uncertainties The component is manufactured to precision dimensions, listed as Ø43×0.6×25 mm, which allows it to be specified confidently where axial spacing and torque characteristics are critical. In workshop environments where tolerances are tight, a spring with consistent geometry will reduce adjustment time; measurable dimensions permit direct comparison with existing parts and simplify ordering for maintenance cycles. Where interchangeability is required, the documented geometry serves as a verifiable reference point. Practical handling and predictable performance With a listed mass of 0.16 kg, the element is lightweight, making replacement and handling in confined machine areas easier and safer. The spring has been designed so that installation can be carried out with standard tools and minimal fixture changes; this practical approach helps to keep machine downtime low. Because the part is a discrete mechanical component, wear behaviour is predictable and can be planned for in preventive maintenance schedules rather than leaving adjustments to chance. Integration into machine assemblies with clear expectations Compatibility with milling equipment is supported by the component’s declared purpose for milling machines and its compact form factor. Specifying this torsion spring means the required angular preload and mounting envelope are already considered, which simplifies parts lists and assembly documentation. Where definitive torque or material data are required for finite-element checks or regulatory documentation, the dimensional certainty provided here establishes a solid starting point for further technical validation. Supply reliability and sourcing advantage Sourced under the Vertex brand, the part benefits from an established supply chain and consistent part identification, which reduces procurement friction. Stocks are distributed through Metav Werkzeuge in Europe, a partner that positions itself as a "quality filter" for precision tools and parts; that relationship supports predictable restocking and traceable deliveries. For operations seeking to consolidate suppliers, this arrangement contributes to a more resilient procurement strategy without sacrificing component traceability. Contact Metav Werkzeuge to secure Vertex VSP-R8 torsion springs for milling applications and to verify compatibility with existing assemblies — supplied from Emmerich with professional consultation available Technical Data Article number: VSP-R8 GTIN: 4061905083334 Designation: Torsion spring Brand: Vertex Facts Dimensions: Ø43×0.6×25 mm Weight: 0.16 kg Length value: 1300 Special features Application: for milling machines Category: Vertex Gallery images available FAQ What are the exact external dimensions of the spring? The VSP-R8 is specified with dimensions of Ø43×0.6×25 mm, which define the outer diameter, wire thickness and usable axial length. Is the torsion spring suitable for milling-machine use? Yes — the part is designated for use with milling machines; compatibility with a specific machine should be confirmed against the listed dimensions and mounting arrangement. How much does the component weigh? The component has a mass of 0.16 kg as provided in the product data. Who manufactures the part and how is it identified? The spring is a Vertex product identified as VSP-R8 with GTIN 4061905083334. Are photos and detailed views available before ordering? Gallery images are provided for the item and can be used to check form and fit visually before procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact combination of precise angular indexing, a robust 5" chuck and an MT‑2 mounting for reliable setup and repeatable results. Order the indexing head directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Indexing head BS-0-J-5 – Semi‑universal dividing head with 5" chuck and MT‑2 taper (Vertex) The Indexing head BS-0-J-5 is a semi‑universal dividing head designed for precise angular indexing and machining set‑ups on milling and drilling equipment. Semi‑universal design for versatile use Integrated 5" chuck for secure clamping MT‑2 taper mounting for common spindles Stable 130 mm diameter body for low vibration Precise indexing that improves workflow The semi‑universal dividing head provides accurate angular positioning for repetitive machining operations, reducing setup time and minimising alignment errors. Its integrated 5" chuck secures workpieces during rotation, while the MT‑2 taper ensures a straightforward mechanical interface with many conventional spindles. For workshops focused on repeatability and throughput, the device offers a clear efficiency advantage, transforming manual dividing tasks into reliable, measurable processes. Robust design for stable machining results Constructed for heavy‑duty workshop use, the unit’s mass and geometry contribute to vibration damping and stable cutting conditions. The 130 mm diameter body and overall build deliver the rigidity required for precise finishing and indexed milling. Compatibility with a range of workpiece shapes is supported by the semi‑universal concept, which accommodates common clamping needs while maintaining concentricity and surface quality under load. Practical integration and application scope Mounting on standard spindles via the MT‑2 taper allows rapid installation and removal between jobs, helping to maintain machine uptime. Typical applications include angular division, slotting, spline work, and small gear prototyping where exact positioning is essential. The compact form factor and dependable clamping reduce repositioning effort, enabling consistent part quality and predictable cycle times with lower rework rates. Contact Metav Werkzeuge for tailored advice on the Vertex BS-0-J-5 indexing head and receive guidance on machine compatibility and ordering options Technical data SKU: BS-0-J-5 GTIN: 4061905089367 Brand: Vertex Diameter: 130 mm Weight: 24 kg ECLASS: 21020590 Semi‑universal dividing head MT‑2 taper mounting Supplied with 5" chuck Model designation: BS-0-J-5 FAQ What machines is the BS-0-J-5 suitable for? The BS-0-J-5 indexing head is intended for use on milling machines and drill spindles that accept an MT‑2 taper and benefit from a semi‑universal dividing head for angular indexing. Is the 5" chuck included with the unit? Yes, the Vertex BS-0-J-5 is supplied with a 5" chuck as a standard feature to ensure immediate clamping capability. How does the MT‑2 taper affect mounting? The MT‑2 taper on the BS-0-J-5 provides a conventional, mechanically secure interface for quick installation on compatible spindles and tailstocks. What kind of workpieces can be processed with this dividing head? The semi‑universal design of the BS-0-J-5 supports a wide range of small to medium workpieces for dividing, slotting and precision angular machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise angular control, robust construction and multi-position capability for reliable indexing in production and workshop tasks; order the Vertex BS-0 directly via Metav Werkzeuge or consult our specialists for application advice. Vertex BS-0 Semi-Universal Dividing Head — 40:1 gear ratio & MT2 taper BS-0 is a semi-universal dividing head for precise indexing and indirect cutting operations on milling machines and drill presses, suitable for vertical and horizontal use Semi-universal design for versatile indexing 40:1 gear ratio for fine angular control 130 mm divider flange for larger workpieces Hardened, ground worm and tapered bearings Accurate angular control for repetitive machining The dividing head delivers repeatable results through its gear ratio 40:1, which enables fine subdivision of rotations with minimal backlash. This level of control reduces rework and shortens setup time when producing evenly spaced features such as gear teeth, bolt circles or fluted profiles. The mechanism’s smooth indexing contributes to consistent finishing results, translating machine capability into measurable production reliability. Flexible mounting and multi-plane operation With an axis height 100 mm and a 130 mm divider flange, the unit accommodates a wide range of workpiece sizes while remaining compact. The head permits dividing in both vertical and horizontal positions and offers a tilt of ±90° for inclined indexing operations. Indexing plates allow subdivision of the circumference into 15–49 parts, which supports common workshop tasks without the need for additional adapters or complex calculations. Built for endurance and precision Critical load-bearing elements are designed for longevity: the unit features a hardened and ground worm and precision tapered roller bearings, providing durable meshing and stable rotation under intermittent loads. The internal MT2 Morse taper enables secure tool or mandrel mounting, while multiple fixing holes accept 16 mm fasteners for rigid attachment to machine tables. The overall mass of 19 kg contributes to vibration damping during cutting, improving surface finish quality. Practical setup and supplied accessories The dividing head arrives with practical accessories and interface features to speed integration: the accessory set includes a TS-1 tailstock, indexing plates, a flange and an MT2 centring tip, simplifying alignment and concentric mounting of work. A base 160 x 91 mm facilitates stable positioning on most machine tables, and the total unit height of 173 mm helps plan clearances during multi-axis operations. These options make the device a versatile indexing solution for both prototype work and small-series production. For precise indexing in the workshop, rely on Metav Werkzeuge to source the Vertex BS-0 and request tailored advice from our technical consultants in Emmerich for an efficient integration into existing machinery. Technical data Article number: BS-0 GTIN: 4061905083273 Manufacturer: Vertex Core technical data Dimensions: 188 x 160 x 173 mm Weight: 19 kg Axis height: 100 mm Divider flange diameter: 130 mm Gear ratio: 40:1 Base size: 160 x 91 mm Fixing hole size: 16 mm Special features Semi-universal dividing head for indirect cutting Smooth tilting 90° for angled indexing Dividing possible in vertical and horizontal position Dividing discs allow 15–49 part divisions Internal MT2 Morse taper for centring/fixtures Accessories: TS-1 tailstock, flange, centring tip Hardened and ground worm Precision tapered roller bearings FAQ What machines is this dividing head compatible with? The Vertex BS-0 dividing head is suitable for use on milling machines and drill presses where an MT2 spindle or appropriate adaptor is provided for secure mounting. How fine can the indexing be with this unit? Indexing is achieved via the 40:1 gear ratio and the supplied dividing discs, enabling divisions of the circumference into 15–49 parts for common workshop requirements. Can the head be tilted for angled work? Yes, the unit provides smooth tilting up to ±90°, allowing indexed features to be produced at inclines as required. Which accessories are included or recommended? Standard accessories shown in the product gallery include a TS-1 tailstock, dividing discs, a flange and an MT2 centring tip; these simplify setup and ensure concentric clamping. Is the construction suitable for heavy-duty workshop use? The presence of a hardened and ground worm together with precision tapered roller bearings and a mass of 19 kg make the head robust for repeated workshop tasks while damping vibration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of FC25 cast iron stability, a compact 132×185 mm work surface and a 45° swivelling function to speed up setup times and secure small workpieces with repeatable accuracy. Order the VP-180 directly via Metav Werkzeuge or ask the Metav consultants for application advice. Vertex VP-180 Tilting Clamping Table – 45° swivel, 132×185 mm work surface The VP-180 tilting clamping table is a compact workholding device designed for precise angular positioning in milling, drilling and inspection tasks. Swivels 45° for angular clamping Compact table 132×185 mm FC25 cast iron body for stability Max load 6 kg for small workpieces Stable base for repeatable precision The VP-180 is built from FC25 cast iron, a material chosen for its excellent damping and dimensional stability. This construction reduces vibration during machining, which in turn preserves tool life and improves surface finish. The 132×185 mm top provides a defined clamping area that is easy to align on small milling machines or inspection benches; the low centre of gravity, ensured by a weight of 7.38 kg, keeps the unit secure under load. For users unfamiliar with material grades, FC25 refers to a grey cast iron grade commonly used in machine components where stiffness and vibration absorption are required. Faster setups with accurate angular clamping A 45° swivel capability allows angled operations to be completed without repeated repositioning of the workpiece, saving time and reducing cumulative alignment errors. The tilting mechanism is engineered for stable indexing so that once an angle is set it remains fixed under machining forces. With a max load of 6 kg, the device is suited to smaller components and precision fixtures where control and repeatability matter more than raw clamping capacity. The workholding concept reduces auxiliary operations and supports more efficient batch processing for small to medium series. Compact, easy to integrate into existing workflows At a height of 95 mm, the unit integrates smoothly into many machine set-ups and measuring stations without raising the centre of operation excessively. The compact footprint and predictable mounting interfaces simplify fixturing and allow the table to be combined with modular clamps or vices. Routine maintenance is straightforward: surfaces should be kept clean and light lubrication applied to the swivel joint to maintain smooth indexing. The design supports quick adoption in workshops seeking a reliable, cost-effective solution for angled clamping and inspection. For compact, accurate angular clamping from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VP-180 GTIN: 4061905084287 ECLASS: 21020702 Core figures Weight: 7.38 kg Height: 95 mm Table surface: 132×185 mm Max load: 6 kg Materials / Special features Material: FC25 cast iron Function: Swivels 45° Type: Tilting clamping table FAQ What is the maximum load capacity of the VP-180? The VP-180 tilting clamping table has a maximum load capacity of 6 kg, suitable for small components and precision fixtures. Which material is used for the body and why is it important? The body is made of FC25 cast iron; this material provides vibration damping and dimensional stability, which improves surface finish and tool life during machining. How large is the usable table surface? The usable table surface measures 132×185 mm, providing a compact yet well-defined area for clamping small workpieces and fixtures. Can the table be integrated into existing milling or inspection setups? Yes, with a height of 95 mm and a compact footprint, the unit is designed for straightforward integration into many machine tables and inspection benches. Is the swivel angle fixed or adjustable? The clamping table swivels 45°, enabling angled machining operations without repeated repositioning of the workpiece. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the force‑amplified design and a substantial 40 kN clamping force combined with a wide 0–165 mm opening for secure, time‑saving workholding; order this vice directly via Metav Werkzeuge or request application advice from the consultants. VQCV-125H-L Universal Machine Vice (left‑hand, force‑amplified, Vertex) The VQCV-125H-L is a mechanical, force‑amplified universal machine vice designed for secure clamping across milling and general machining tasks Force-amplified design with 40 kN clamping force Left-hand version for specialised setups Opens 0–165 mm for wide workpiece range High positional accuracy of 0.01 mm Consistent clamping for uninterrupted machining The VQCV-125H-L delivers a force‑amplified clamping mechanism that converts operator input into significantly higher holding force, specified at 40 kN, ensuring workpieces remain immobile during heavy cuts. This conversion reduces repeated re‑clamping and minimises the need for corrective measures, improving cycle stability on the machine table. The vice’s 0–165 mm opening range accommodates a broad variety of parts, lowering the number of different vices required in a busy toolroom. The substantial mass and compact footprint contribute to inherent stability, enabling confident machining of tougher operations without compromising setup speed. Precision and repeatability that protect tolerances Positioning is specified to 0.01 mm, which corresponds to repeatability in the ten‑micron range and supports close tolerance work. Such positional accuracy is advantageous when performing multiple operations that demand consistent datum referencing, because the clamping system preserves alignment between setups. Where inspection and quality traceability matter, this level of control reduces scrap rates and the need for secondary finishing. Technical design elements that govern jaw parallelism and spindle interaction ensure that the measured accuracy translates into real‑world repeatability on the shop floor. Robust, workshop‑ready construction for daily use Built for demanding environments, the machine vice combines a compact external profile (135 x 477.5 x 180 mm) with a working mass of 53 kg, providing the inertia required to damp vibration under load. The left‑hand execution offers flexible integration into fixtures and special arrangements where handedness is a factor. The universal configuration and force‑amplified operation make the vice suitable for sequential machining tasks on small to medium machines, shortening tool changes and reducing fixture handling. The overall design aims for longevity in industrial use while keeping maintenance straightforward, thus supporting consistent throughput. Integration into procurement and supply chains Sourcing the VQCV-125H-L through Metav Werkzeuge gives access to a broad inventory, described by Metav as a practical "quality filter" for the European market. Rapid dispatch options and a comprehensive product range help to consolidate procurement and reduce lead times for production lines. Metav’s experienced advisory service is available for technical clarification and application matching, while the documented specifications—such as 40 kN clamping force, 0–165 mm opening and 0.01 mm accuracy—provide a clear basis for planning Fixturing and Process Control. For workshops seeking dependable, repeatable clamping, this vice supports both productivity and quality objectives. Contact Metav Werkzeuge to discuss application suitability of the Vertex VQCV-125H-L, arrange supply or obtain detailed technical advice by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: VQCV-125H-L GTIN: 4061905083372 ETIM: EC002173 Type: Mechanical Manufacturer: Vertex Facts Opening: 0–165 mm Dimensions: 135 x 477.5 x 180 mm (L x W x H) Weight: 53 kg Clamping force: 40 kN Accuracy: 0.01 mm EClass: 21020601 Special features Universal machine vice Left‑hand execution Force‑amplified / power‑enhanced design Rapid dispatch noted in product description FAQ What clamping force does the vice provide? The VQCV-125H-L offers a clamping force of 40 kN, providing robust holding power for heavy machining tasks. Which opening range is suitable for workpieces? This universal machine vice supports an opening range of 0–165 mm, allowing a wide variety of part sizes to be secured. How precise is the VQCV-125H-L in repeated setups? The vice is specified with an accuracy of 0.01 mm, delivering repeatable positioning for tight tolerance work. Is this a left‑hand or right‑hand version? The supplied model is the left‑hand execution of the force‑amplified universal machine vice. Can Metav Werkzeuge provide application advice for this vice? Metav Werkzeuge can advise on the application suitability of the Vertex VQCV-125H-L and support procurement decisions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

A compact 90° right-angle head that pairs a 138 mm body diameter with up to 2,000 rpm for dependable angled machining and reduced cycle times. Its sturdy 12.5 kg construction provides stable cutting conditions and consistent surface quality. Order the VRA-R8 directly via Metav Werkzeuge or ask our consultants if needed. VRA-R8 90° right-angle head — Max 2,000 rpm, 138 mm body VRA-R8 is a right-angle milling head designed for precision angled machining on milling centres and machining stations, offering a compact footprint and reliable performance for workshop and industrial applications 90° right-angle head for angled machining Max 2,000 rpm operational speed 138 mm body diameter for robust support Sturdy 12.5 kg construction for stability Consistent performance for angled operations The 90-degree configuration delivers reliable, repeatable results when the tool axis must be reoriented. With a rated maximum speed of 2,000 rpm, the head maintains stable rotational behaviour under typical finishing and roughing feeds. The relatively large 138 mm body diameter increases bearing spacing, reducing deflection and helping to preserve tool geometry during side loads. That translates into fewer reworks and better dimensional adherence on angled faces. Heavy-duty build that minimises vibration A mass of 12.5 kg and a compact, rigid housing combine to dampen vibration and improve surface finish during aggressive cuts. The robust construction supports consistent concentricity and reduces chattering, which in turn extends cutting-edge life and lowers tooling costs over time. The design concentrates mass close to the mount, keeping inertia where it benefits machining stability without compromising accessibility at the workpiece. Integration and compatibility with Type R drill heads The head is compatible with a Type R drill head diameter range of 85.725–86 mm, enabling straightforward integration with existing spindle interfaces of the same family. The connection geometry and maximum speed rating should be checked against the host machine’s spindle specification; where matched, the attachment functions as an efficient means to add angled machining capability without major machine modifications. Clear geometric compatibility shortens retrofit time and reduces setup complexity. Logistics, supply certainty and workshop benefits Availability is supported by fast dispatch from stock, reducing downtime compared with long-lead custom units. For shops seeking to add angled operations without complicating production flow, this right-angle head provides a pragmatic balance between performance and ease of supply. Combined with routine maintenance, the unit supports predictable throughput and helps maintain delivery reliability in production schedules. Contact Metav Werkzeuge in Emmerich for technical compatibility checks and to reserve a Vertex VRA-R8 90° right-angle head; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VRA-R8 GTIN: 4061905084720 EClass: 21019290 Facts Body diameter: 138 mm Maximum speed: 2,000 rpm Weight: 12.5 kg Drill head (Type R) diameter: 85.725–86 mm Special features 90° orientation for angled machining Compatible with Type R drill head Ø 85.725–86 mm Fast dispatch from stock Brand: Vertex FAQ What spindle speed is recommended for this right-angle head? The VRA-R8 is rated to a maximum of 2,000 rpm; adherence to this limit ensures bearing life and consistent performance under normal cutting conditions. Is the VRA-R8 suitable for heavy side-loading operations? The 12.5 kg mass and 138 mm body diameter give the unit improved damping and reduced deflection, making it suitable for moderate side loads typical of angled milling and finishing. Which drill head sizes are compatible with the attachment? Compatibility is provided for Type R drill heads with a diameter of 85.725–86 mm, permitting direct integration where the host machine accepts that interface. How does the head contribute to tool life and surface quality? Stable bearing spacing and rigid housing minimise vibration and runout, which helps to extend cutting tool life and produce a more consistent surface finish on angled faces. Can this head be used across different machining centres? Where the spindle or mounting interface matches the Type R dimension range and the machine can operate within the head’s maximum speed, the VRA-R8 is suitable for retrofit on compatible milling centres. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the compact dimensions and standard M8x1.25 thread to speed up assembly and reduce part mass in confined installations; the lightweight design and Vertex quality ensure consistent handling and simple stocking via Metav Werkzeuge — order directly through Metav Werkzeuge or consult the team for procurement guidance. Vertex coupling 2612M – compact coupling with M8x1.25 thread A Vertex coupling designed for mechanical connections in confined assemblies, offering a compact 13 x 22 mm footprint and compatibility with standard M8x1.25 threaded components. Compact 13 x 22 mm footprint Compatible with M8 x 1.25 thread Lightweight at 0.033 kg Technical drawing and detail images available Space-saving form that keeps assemblies compact and predictable The compact 13 x 22 mm format reduces the installation envelope, enabling denser layouts on fixtures and jigs without compromising service access. With a mass of 0.033 kg, extra rotating or moving masses are minimised, which can contribute to lower inertia in dynamic assemblies. The standard M8x1.25 specification denotes a metric thread with a 1.25 mm pitch, meaning the part will mate reliably with common M8 fasteners and tapped holes. This combination of small footprint and standard threading supports faster component selection and simpler inventory management, while the clear dimensional data aids in collision checks and CAD planning. Designed for straightforward integration and dependable mechanical connection The coupling functions as a mechanical connector for threaded interfaces, designed to join components where a compact threaded junction is required. Compatibility with the M8x1.25 thread ensures interchangeability with widely used fasteners, reducing the need for bespoke machining. The visible technical drawing and detailed images allow quick verification of fit and orientation before assembly. Where thread engagement is critical, matching the mating thread quality and ensuring appropriate tightening practice secures a consistent connection; the compact geometry also simplifies access with standard hand tools, reducing assembly time and the potential for rework. Procurement reliability and workshop-ready supply from Metav Sourcing the part through established channels reduces lead-time risk for production and maintenance operations. Metav Werkzeuge operates as a quality filter for the European market, providing a central supply point for precision parts and workshop essentials. Stocking a concise, standardised coupling such as this supports predictable reordering and helps maintain continuity in production processes. The Vertex name indicates manufacturer origin for traceability, while the available technical files support purchasing decisions and quality checks during incoming inspection. Secure the Vertex coupling 2612M for your next compact assembly via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for order placement or procurement advice and benefit from their European stock and quality filter. Technical data SKU: 2612M GTIN: 4061905084799 eClass: 21131711 Facts Size: 13 x 22 mm Thread: M8 x 1.25 mm Weight: 0.033 kg Special features Designation: Coupling Brand: Vertex Technical drawing and detailed images available FAQ What thread does the coupling use? The coupling is specified with an M8 x 1.25 thread, compatible with standard M8 fasteners and tapped holes. What are the external dimensions of the part? External dimensions are 13 x 22 mm, suitable for installations with limited space. How much does the coupling weigh? The coupling weighs 0.033 kg, approximately 33 grams. Are technical drawings available for fit verification? Yes, technical drawings and detailed images are provided for the coupling 2612M to assist with fit checks and planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a combination of precision, reliable load capacity and flexible orientation to keep setups fast and repeatable; the clamping solution delivers consistent positioning and robust support for machining and inspection. Order directly via Metav Werkzeuge or consult our advisors for tailored recommendations. VAV-4J clamping angle with free-angle rotary plate — 0.01 mm accuracy, 15 kg load The VAV-4J is a clamping angle with a free-angle rotary plate designed for precise workholding and flexible orientation in machining, measurement and inspection applications. 0.01 mm positioning accuracy 15 kg maximum load capacity 140 mm rotary plate diameter Robust 16 kg construction for stability High-precision positioning for repeatable setups The device provides 0.01 mm of repeatable positioning, which secures consistent alignment across multiple setups and reduces rework. The finely machined indexing surfaces and tight tolerances mean that the angle can be used as a reference element in both production and quality-control environments. For operations where small deviations cause downstream issues, this level of precision shortens inspection cycles and supports reliable component interchangeability. Flexible orientation reduces setup time A continuous free-angle rotary plate with a 140 mm diameter allows rapid adjustment of the clamped workpiece without the need to reposition ancillary fixtures. The smooth swivel action simplifies angular alignment, so machining programmes or measuring sequences can proceed with minimal interruption. This flexibility translates into fewer changeovers, lower setup overhead and a more efficient workflow when varied angles are required within a single production batch. Robust build for vibration-free clamping A solid construction of 16 kg mass combined with a 15 kg rated load capacity provides the rigidity needed to minimise vibration during machining and measurement. The elevated stability reduces chatter and improves surface finish, while the compact 203 mm profile offers a secure footprint on the machine bed or inspection table. Reduced movement under cutting forces helps protect both the workpiece and cutting tools, extending tool life and improving overall process economy. Suited for workshop and inspection environments Engineered for general-purpose clamping and metrology tasks, this angle plate supports a range of production and lab applications. The combination of accurate indexing and a robust platform makes it suitable for repeatable setups, demanding inspection fixtures or small-series machining. Where traceable positioning is important, the VAV-4J offers a pragmatic balance between precise orientation and everyday usability, making it a dependable component in both maintenance shops and quality departments. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex clamping angle into existing workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery. Technical Data Article number: VAV-4J GTIN: 4061905084843 Manufacturer: Vertex Facts Rotary plate diameter: 140 mm Height: 203 mm Weight: 16 kg Maximum load: 15 kg Accuracy: 0.01 mm ECLASS: 21020601 Special features Clamping angle with free-angle rotary plate Designed for precision workholding and inspection Brand: Vertex FAQ What positioning accuracy can be expected with this clamping angle? The clamping angle delivers an accuracy of 0.01 mm, enabling precise and repeatable setups for measurement and machining tasks. What load can the rotary plate support? The rotary plate supports a maximum load of 15 kg while the overall construction weight is 16 kg to ensure stable clamping. Which applications are appropriate for this device? Typical uses include workholding for small-series machining, fixture setups and inspection tasks where controlled orientation and repeatability are required. How does the free-angle rotary plate improve workflow? The continuous rotation of the plate simplifies angular alignment and reduces the need for repositioning, shortening setup times and lowering changeover effort. Which brand and SKU identify this product? This product is the Vertex clamping angle, SKU VAV-4J, supplied for precision workholding in workshop and inspection environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of repeatable angular positioning, firm load capacity and compact height for reliable setup work. Benefit from an accurate rotary disc (Ø 140 mm) and 0.01 mm positional repeatability to streamline small-series machining and inspection tasks. Order the clamping angle directly via Metav Werkzeuge or ask our consultants if needed. VAV-5J Clamping Angle with Free-Angle Rotary Table by Vertex — Ø 140 mm, 0.01 mm accuracy VAV-5J is a compact clamping angle designed for precision orientation and small-part workholding, equipped with a free-angle rotary table for flexible angular positioning across machine shops and inspection benches. Free-angle rotary disc Ø 140 mm Load capacity 15 kg Positional accuracy 0.01 mm Stable mass 17 kg for vibration damping Precision that keeps setups predictable The design focuses on high positional accuracy so angular adjustments remain reliable over repeated cycles. With a verified repeatability of 0.01 mm, the unit supports precise referencing and minimises rework during multi-step operations. The rotary disc, at Ø 140 mm, provides a defined contact surface for fixtures and jaws, enabling accurate rotational alignment without complex fixturing. This reduces cumulative errors when transferring a component between inspection and machining operations, improving throughput and quality control. Stable support for machining and measurement A substantial mass of 17 kg gives the assembly inertia that resists chatter and small disturbances during clamping and light machining, while the specified maximum load of 15 kg defines safe workpiece limits. The compact overall height of 203 mm keeps workpieces close to the machine spindle or measuring probe, shortening tool overhang and improving stiffness in the setup. These characteristics translate into steadier surface finishes and more consistent measurement results when holding small to medium parts. Flexible orientation for compact workflows The integrated free-angle rotary table converts a simple support into a multi-orientation workholding solution, allowing angular indexing and non-standard clamping positions without additional subplates. That flexibility shortens setup time when multiple faces require access and supports quick transition from measurement to machining tasks. The unit is suitable for assembly benches, small mills and inspection stations where space is at a premium and precise angular referencing is essential, offering a practical balance between accuracy and operational versatility. Choose the Vertex VAV-5J for dependable angular workholding and contact Metav Werkzeuge in Emmerich for tailored advice and fast, reliable delivery to the workshop. Technical data SKU: VAV-5J GTIN: 4061905090752 Manufacturer: Vertex Facts Rotary disc diameter: Ø 140 mm Height: 203 mm Max. load: 15 kg Positional accuracy: 0.01 mm Weight: 17 kg Special features Free-angle rotary table Suitable for precision workholding ECLASS: 21020601 FAQ What maximum load can the clamping angle carry? The maximum permissible load is 15 kg for the VAV-5J clamping angle, which is suitable for small fixtures and components used in machining and inspection. How precise is the angular positioning of the rotary disc? Positional repeatability is specified at 0.01 mm, so the free-angle rotary table delivers fine, repeatable adjustments for accurate setups. What is the diameter of the rotary disc and why does it matter? The rotary disc measures Ø 140 mm; a defined disc diameter ensures consistent support area for fixtures and improves alignment when rotating parts between operations. Which applications suit this clamping angle best? The unit is intended for precision workholding tasks in small mills, inspection benches and assembly jigs where reliable angular orientation and compact footprint are required. Is the VAV-5J appropriate for measurement benches as well as machining? Yes, the VAV-5J’s repeatability and stable mass make it well suited for both measurement and light machining applications that demand consistent positioning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a robust cast iron construction, an extra-large 0–265 mm opening and a consistent 4,500 kgf clamping force to secure a smooth production flow and minimise rework. Order the Hydraulic Machine Vice VMCH-5 directly via Metav Werkzeuge or ask our consultants if needed. Hydraulic Machine Vice VMCH-5 — Hydraulic clamping with 0–265 mm opening (Vertex) A robust Hydraulic Machine Vice VMCH-5 engineered for secure clamping in machining environments, featuring an extra-large opening and high clamping force for heavy-duty work Hydraulic clamping action for secure hold Extra-large 0–265 mm opening capacity 4,500 kgf clamping force for heavy work Cast iron construction, mass 45.5 kg Built for heavy-duty clamping and stability The vice is manufactured from cast iron, giving it substantial mass and vibration damping for stable machining. The heavy construction, at 45.5 kg, reduces movement under load, which directly benefits surface finish and tool life when working on demanding operations. Because the body is rigid and well balanced, the clamp keeps workpieces steady during milling, drilling or turning, translating into fewer set-ups and consistent cycle times for production environments. Consistent clamping force for repeatable results Hydraulic operation delivers a reliable, even hold across the jaw faces, with a rated 4,500 kgf clamping force that secures components for heavy cutting conditions. The unit's precision 0.01 mm specification supports tight tolerances and repeatability: this figure refers to the vice’s repeatability and positional consistency, helping to maintain part accuracy across batches. Clear specification of force and tolerance makes process planning and fixture design straightforward for production engineers. Flexible workpiece handling with an extra-large opening An opening range of 0–265 mm accommodates a broad spectrum of component sizes, reducing the need for multiple fixtures and increasing shop-floor flexibility. The broad jaw travel suits both compact parts and larger workpieces, allowing a single clamping solution to cover varied tasks. For workshops that handle mixed production runs, this capacity minimises changeover time and simplifies tooling inventories. Compact footprint, straightforward integration With compact external dimensions of 143 x 550 x 140 mm, the vice fits comfortably on most machine tables while providing substantial clamping capability. The hydraulic design offers controlled clamping force without manual over-tightening, improving operator safety and consistency. The combination of robust materials and a compact layout supports straightforward integration into CNC machines and manual mills where precision and uptime are priorities. Contact Metav Werkzeuge for tailored clamping advice and rapid supply from Emmerich — ask about the VMCH-5 and its fit for specific machining tasks Technical data SKU: VMCH-5 GTIN: 4061905089633 ETIM: EC002173 EClass: 21020601 Brand: Vertex Core technical data Opening: 0–265 mm Clamping force: 4,500 kgf Weight: 45.5 kg Accuracy: 0.01 mm Dimensions: 143 x 550 x 140 mm Materials & special features Material: cast iron Type: Hydraulic Model designation: Hydraulic machine vice with extra-large opening FAQ What clamping range does the vice cover? The Hydraulic Machine Vice VMCH-5 by Vertex provides an opening range of 0–265 mm, suitable for a wide variety of component sizes. Is the vice suitable for cast iron workpieces? Yes, the vice is made from cast iron and is appropriate for machining cast iron components, offering the rigidity required for stable cutting conditions. What clamping force can be expected from the unit? The vice delivers a rated 4,500 kgf clamping force, giving secure holding for heavy-duty machining tasks. How precise and repeatable is the clamping position? The vice is specified with a 0.01 mm accuracy figure, indicating high repeatability for serial production and precision setups. What are the physical dimensions and weight of the vice? External dimensions are 143 x 550 x 140 mm, and the vice has a mass of 45.5 kg, combining compact footprint with substantial stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust modular vice combining 2000 kgf clamping force with a 0–200 mm opening and guaranteed 0.01 mm accuracy — order directly via Metav Werkzeuge or ask our consultants for configuration advice VMP-7A Precision machine vice (Vertex) — 2000 kgf clamping force, 0–200 mm opening The VMP-7A is a precision machine vice intended for modular workholding in milling and machining environments, available with an optional hydraulic configuration for increased productivity Precision 0.01 mm accuracy 2000 kgf clamping force 0–200 mm adjustable opening Modular design, optional hydraulic Consistent heavy-duty clamping for repeatable results The vice delivers a measurable advantage where secure holding and repeatability matter most. With a clamping force of 2000 kgf and construction from alloy steel, the unit provides a stable workholding platform that reduces part movement and supports tight tolerances. The 0.01 mm accuracy specification reflects controlled manufacture and finishing processes; this level of precision reduces setup iterations and lowers scrap rates in serial production. For workshops seeking predictable outcomes, the robust clamping performance directly translates into fewer interruptions and more consistent machining cycles. Flexible modularity to match production needs Modularity is at the core of the design: the vice can be configured as a purely mechanical device or adapted with a hydraulic option to suit higher-throughput operations. The adjustable 0–200 mm opening covers a wide range of workpiece sizes, allowing a single fixture to replace multiple dedicated jigs. Modular elements simplify retrofitting and changeovers, so integration into existing machining centres is straightforward. The option to add hydraulic actuation supports faster cycle times where automatic clamping and unclamping contribute to overall productivity gains. Precision that supports quality assurance and measurement Accurate clamping reduces variation at the workpiece and eases downstream inspection. The vice’s 0.01 mm positional reliability helps maintain nominal dimensions through machining, which simplifies quality control and shortens measurement loops. Where measurement equipment and inspection processes are employed, stable fixturing limits the influence of fixture-induced errors, enabling clearer comparison between part data and design tolerances. This vice therefore acts as a practical tool for achieving reproducible quality rather than a variable source of error. Durable construction and compact footprint for workshop use Built from alloy steel and weighing 43.7 kg, the unit balances mass for vibration damping with a compact footprint of 145 x 455 x 118 mm, making it suitable for many machine tables without excessive overhang. The solid build avoids deformation under load and supports reliable clamping cycles over prolonged use. Modular configuration and standardised interfaces facilitate maintenance and spare-part management, while the vice’s dimensions and mass contribute to stable machining performance without occupying unnecessary table space. Discuss hydraulic conversion and workshop integration with Metav Werkzeuge to select the optimal VMP-7A configuration; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMP-7A GTIN: 4061905089602 ETIM: EC002173 eCl@ss: 21020601 Facts Weight: 43.7 kg Dimensions: 145 x 455 x 118 mm Opening: 0–200 mm Clamping force: 2000 kgf Accuracy: 0.01 mm Special features Material: alloy steel Type: mechanical Modular design with optional hydraulic configuration Suitable for heavy-duty machining workholding FAQ What is the maximum jaw opening of the vice? The vice offers an adjustable opening of 0–200 mm, suitable for a wide range of workpiece sizes and adaptable clamping setups. Is a hydraulic version available? Yes — the VMP-7A features a modular design that can be supplied with an optional hydraulic configuration for automated clamping cycles. What level of accuracy can be expected during use? Manufactured to an accuracy of 0.01 mm, the VMP-7A supports tight tolerances and repeatable positioning for precision machining tasks. What materials make up the vice and how does that affect performance? The vice is constructed from alloy steel, providing stiffness and wear resistance that contribute to stable clamping and reduced deformation under load. What are the physical dimensions and weight for machine table planning? Dimensions are 145 x 455 x 118 mm and the unit weight is 43.7 kg, allowing for straightforward assessment of table load and fixture layout. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of soft stop for irregular pieces and a 100–110 mm jaw width to ensure reliable, repeatable clamping with 0.01 mm precision; order the universal jaws directly via Metav Werkzeuge or consult their advisors for fitment guidance and rapid dispatch. Vertex Universal Jaws with Stop — 100–110 mm jaw width, 0.01 mm precision The Vertex Universal Jaws with Stop provide adaptable clamping and precise measurement support for workshop and inspection applications. Soft stop for irregular pieces Jaw width 100–110 mm compatibility Precision to 0.01 mm Designed for metrology and clamping Precision clamping that supports reliable measurement results The core advantage of these jaws is their measured precision. With a specified 0.01 mm level of accuracy, the design focuses on reducing variation at the clamping interface and enabling repeatable positioning for inspection and setup tasks. The compact dimensions (145 x 38 x 49 mm) concentrate clamping forces where they are needed while maintaining a small footprint, which supports tight fixture layouts in busy inspection benches. For technical teams, this translates into fewer re-measurements and tighter process control, especially where small deviations can affect downstream quality. Versatile compatibility and protection for irregular components Compatibility with a jaw width 100–110 mm means the jaws suit measuring fixtures and clamping setups that accept that span. The integrated soft stop cushions contact with non-uniform or delicate parts, limiting point loading and surface damage while maintaining secure hold. Technically, the soft stop absorbs irregularities in form without compromising clamping stability, so components with uneven faces or slight distortions can be checked or machined without additional fixturing. This versatility reduces the need for custom jaw inserts in many routine tasks. Practical benefits for workshop efficiency and inspection throughput These jaws combine straightforward function with tangible efficiency gains: reduced handling time, fewer auxiliary tools and a lower risk of damage to samples during clamping. The modest overall size aids in quick set-up and repositioning on test benches or fixtures. As a component intended for clamping and metrology use, it supports streamlined workflows by integrating easily into existing stations and helping to maintain consistent measurement conditions across batches. Supplier assurance and fitment support from Metav Selection of measurement and clamping accessories is often a small decision with large consequences; confidence in supply and compatibility matters. Supplied through Metav Werkzeuge, the product benefits from a European quality filter and distribution hub in Emmerich that aims to ensure consistent stock and clear technical information. For teams planning integration into inspection or production cells, the combination of Vertex engineering and Metav’s distribution reduces uncertainty about availability and specification matching. For tailored advice on integration or to confirm suitability for a specific measuring instrument, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — their advisors will assist with compatibility checks and dispatch options. Technical Data Article number: VWSJ-R100 GTIN: 4061905083914 ECLASS: 21029107 Dimensions: 145 x 38 x 49 mm Core figures Accuracy: 0.01 mm Jaw width compatibility: 100–110 mm Special features Soft stop for irregular pieces With stop (mit Anschlag) Designed for clamping and metrology applications FAQ Are these jaws compatible with calipers and measuring fixtures? These universal jaws are compatible with fixtures and calipers that accept a jaw width of 100–110 mm; the VWSJ-R100 designation identifies the set and its intended span. What does the soft stop do and when should it be used? The soft stop cushions contact against uneven or delicate parts, reducing surface marking and accommodating small form deviations while retaining clamping stability for inspection or handling. What accuracy can be expected when using these jaws for measurement tasks? A declared accuracy of 0.01 mm supports precise positioning for repeatable measurement; overall system accuracy will also depend on the measuring instrument and fixturing. Can irregularly shaped workpieces be secured reliably with these jaws? Yes—due to the soft stop, the jaws are suited to irregular components where rigid metal-to-metal contact would risk deformation or slippage; final suitability depends on the specific part geometry. Who manufactures the product and where is it produced? The product is manufactured by Vertex; the VWSJ-R100 is part of Vertex’s range of clamping accessories designed for metrology and workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of an automatic impact mechanism, a 14 mm tip and a compact 120 mm form delivers consistent, defined centre marks while keeping handling light and precise. Order directly via Metav Werkzeuge or contact their consultants for specification advice and supply from the Emmerich quality hub. Automatic centre punch VACP-1 — 14 mm tip, 120 mm length (Vertex) The Automatic centre punch is a hand-held centre marker designed for precise, repeatable centre punching in metalworking and general workshop tasks. Automatic impact mechanism for repeatable marks 14 mm tip diameter for precise centre points 120 mm overall length for secure handling Lightweight at 0.07 kg for comfortable use Consistent centre marking for reliable drill starts A robust mechanical impact delivers precision without an external hammer, ensuring repeatability across successive marks. The spring-driven action produces a defined indentation that simplifies drill alignment and reduces wander at the start of a hole. For workshop environments where process reliability matters, this compact marker helps maintain consistent part quality and faster set-up times. The simple mechanical principle also makes the result easy to predict, which benefits repeat production runs and occasional one-off jobs alike. Designed for fast, ergonomic workshop operation With an overall length of 120 mm and a mass of only 0.07 kg, the tool balances positive control with low operator fatigue. The body length provides a comfortable grip while the automatic striking action removes the need for separate striking tools, speeding up marking tasks and reducing handling steps. This combination of compact design and automated impact delivers measurable time savings in marking workflows and contributes directly to improved throughput and operator comfort. Low-maintenance tool that integrates into workshop routines The straightforward mechanical construction minimises maintenance requirements and supports long service life under normal workshop use. Periodic cleaning and occasional lubrication of the mechanism are normally sufficient to keep performance stable. The 14 mm tip dimension provides a clearly defined contact area for consistent centre points. For confirmation on compatibility with specific materials or applications, Metav Werkzeuge can supply additional technical details and guidance by email or phone. Choose Vertex quality: contact Metav Werkzeuge for tailored advice and reliable supply from our Emmerich quality hub. Technical Data Article number: VACP-1 GTIN: 4061905083358 Manufacturer: Vertex Machinery Works Co., Ltd. Core specifications Diameter: 14 mm Length: 120 mm Weight: 0.07 kg eClass: 21022304 Special features Automatic centre punch mechanism Compact hand-held design SKU: VACP-1 Product type: Centre punch FAQ How does the automatic mechanism operate? The automatic mechanism in the Automatic centre punch uses a spring‑driven striker that creates an impact when pressed, producing a repeatable indentation without a hammer. What size of mark does the tip make? The tool is specified with a 14 mm tip diameter, which gives a clearly defined centre point suitable for drill starting and alignment tasks. Is the tool suitable for regular workshop use? Yes; the VACP-1 from Vertex is designed for routine workshop marking and benefits from a simple mechanical design that supports regular use with minimal maintenance. How should the centre punch be maintained? Keep the tool clean and free of swarf; occasional light lubrication of the mechanism is recommended to maintain smooth operation and consistent striking force. Can the centre marks be used as drill start points? The indentations produced by the VACP-1 provide reliable drill start points and help to prevent drill wandering when beginning a hole. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable clamping for standard 14 mm T-slots and a secure M12 threaded connection ensure stable fixture assembly; compact dimensions allow space-saving installation. Order the 3414M T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. 3414M T-slot nut by Vertex — M12 thread for 14 mm T-slots The 3414M T-slot nut is a compact fastening component designed for use in 14 mm T-slots on machine tables and modular fixturing systems. M12 thread for secure fastening Fits 14 mm T-slot Compact dimensions 13.7 x 28 x 8 mm Supplied individually (single piece) Precision fastening for standard machine tables The 3414M T-slot nut combines a standard M12 thread with a profile tailored to a 14 mm T-slot, delivering reliable clamping where repeatable positioning is required. The geometry of the insert guarantees a firm seating in the slot, reducing micro‑movement during machining operations; this translates into consistent part quality and fewer setup checks. The compact footprint also helps when multiple fixtures share limited table space, so a neat, resilient assembly can be achieved without redesigning fixturing layouts. Compatibility with common machine tables makes it a straightforward choice for retrofit and new installations. Easy integration and reliable clamping under load Designed for direct insertion into the slot, the fastening component offers a low‑profile solution that supports controlled torque transmission via the M12 interface. The stated outer dimensions of 13.7 x 28 x 8 mm enable predictable clearance planning and straightforward CAD modelling of the fixture. Where precise clamping forces are required, the nut’s form factor ensures centred load transfer and stable seating, which helps to avoid chatter and maintain surface finish. For production environments, this means fewer interruptions and a smoother machining cycle, improving overall throughput and workplace efficiency. Quality and consistency that support workshop workflows Manufactured by a recognised brand and supplied individually, the item is intended for users who prioritise precision and dependable repeatability in their fixturing. The combination of standardised sizing and a robust threaded connection reduces the need for custom fasteners, simplifying inventory management and procurement. Choosing standard components also supports leaner tooling strategies and faster changeovers. For operations seeking traceable parts and consistent results, this clamping insert contributes to a more reliable process chain and reduced setup variability. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex 3414M T-slot nut — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: 3414M GTIN: 4061905087769 Brand: Vertex Facts T-slot width: 14 mm Thread: M12 Dimensions: 13.7 x 28 x 8 mm Special features Supplied individually Low-profile design for space-saving fixtures Intended for machine table and modular fixturing FAQ What T-slot width does the nut fit? The nut is designed for a 14 mm T-slot and provides a form-fit connection suitable for standard machine table profiles. Which thread size is used for the fastening? A standard M12 thread is provided for secure attachment and compatibility with common clamping hardware. Can this component be used for retrofitting existing fixtures? Yes, the compact dimensions and standard thread make it suitable for retrofit applications where a 14 mm T-slot and M12 fasteners are already in use. Is the material specified for the nut? Material information is not provided in the product data; please contact Metav Werkzeuge for material and surface treatment details. What is the SKU for ordering and reference? Order reference: 3414M; use this SKU when enquiring about availability and delivery options. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, robust and precisely machined: the S45C construction and the compact 14 x 20 x 10 mm format deliver stable positioning and repeatable clamping in T-slot fixtures. Supplied as a set of 4, the blocks are compatible with M5 T-nuts and simplify fixture assembly. Order the Block for guide rail directly via Metav Werkzeuge or ask our consultants if needed. Block for guide rail — Compact clamping block by Vertex, 14 x 20 x 10 mm A Block for guide rail intended for fixture and positioning tasks in workshop and production environments, offering a small footprint and reliable mechanical properties for repetitive clamping operations. Set of 4 pieces Material S45C medium‑carbon steel Compact 14 x 20 x 10 mm size Durable steel construction for reliable positioning The locating component is machined from S45C, a medium‑carbon steel selected for its balance of hardness and machinability. This choice ensures consistent edge stability and resistance to deformation under repeated clamping cycles, which in turn reduces rework and downtime. For applications that require predictable behaviour during tightening and release, the material properties provide a trustworthy baseline for long‑term use in jigs and fixtures. Small form factor that maximises flexibility With external dimensions of 14 x 20 x 10 mm and a mass of 0.07 kg, the compact block is designed to occupy minimal space on a rail or platen while still providing secure contact points. The low profile supports close‑packed arrangements and multi‑point locating systems, enabling precise alignment without obstructing adjacent tooling. The M5 T-slot compatibility allows integration into common T‑nut rails, facilitating rapid reconfiguration of clamping setups. Set configuration and workshop integration Supplied as a set of 4, the blocks reduce ordering complexity for repetitive fixture builds and ensure consistent parts across multiple stations. Identified by SKU 14TO14 and GTIN 4061905089831, the components are straightforward to track in stock and asset management systems. The simple geometry supports rapid visual inspection and easy replacement, which helps maintain uptime and simplifies maintenance routines. Contact Metav Werkzeuge to discuss how the Vertex blocks can be integrated into existing fixtures or to request a tailored supply for production needs — our advisors are ready to assist. Technical Data SKU: 14TO14 GTIN: 4061905089831 Eclass: 23300402 Facts Dimensions: 14 x 20 x 10 mm Weight: 0.07 kg T‑slot: M5 Special features Material: S45C Set: 4 pieces per set Category: Vertex FAQ What material is the block made from? The block is made from S45C medium‑carbon steel, chosen for balanced strength and machinability suitable for fixture components. What are the exact dimensions and mass of the component? Dimensions are 14 x 20 x 10 mm and the weight is 0.07 kg, giving a compact footprint for multi‑point locating arrangements. Is the component supplied as a single piece or a set? The item is supplied as a set of 4 pieces, simplifying procurement for fixture assemblies. Which T‑slot size is compatible with the block? The block is designed for use with an M5 T‑slot fastening system. How can the part be identified for ordering and inventory? The product is listed under SKU 14TO14 with GTIN 4061905089831 for clear identification in ordering and stock systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, precision clamping solution that combines a small footprint with straightforward integration into standard fixture tables; with its M12 bolt and compatibility with 15 mm T-slots, the clamp enables reliable workholding and shorter set-up times. Order the product directly via Metav Werkzeuge or ask our consultants if needed. Step Clamp — Vertex step clamp for 15 mm T-slots with M12 bolt A Step Clamp engineered for secure workpiece retention on 15 mm T-slot tables, suitable for general fixture and machining applications Compact 28 × 64 × 12 mm footprint Compatible with 15 mm T-slots, M12 bolt Lightweight at 0.125 kg for flexible positioning Precise clamping for small fixtures and jigs The Step Clamp from Vertex delivers a space-saving profile that supports accurate workholding where access and clearance are limited. Its compact dimensions (28 × 64 × 12 mm) make it suitable for tight fixture layouts, while the M12 bolt interface ensures a firm mechanical connection to standard clamping systems. By choosing a component with a reduced footprint and defined mounting standard, set-up complexity is reduced and repeatability in batch processes is improved, which contributes to shorter cycle times and fewer alignment checks. Fast integration and reliable positioning Designed to engage standard 15 mm T-slots, this clamp streamlines fixture assembly and reconfiguration. The combination of clear mechanical interfaces and a lightweight (0.125 kg) construction allows faster repositioning during job changes and reduces handling effort at the machining bench. For engineers and shop fitters, the use of a predictable thread size and slot standard simplifies tool planning; the result is a measurable reduction in set-up time and a smoother workflow in mixed-production environments. Robust workholding that supports productivity Even in compact form, the step-style clamping element provides stable clamping action for a wide range of general machining tasks. The proven geometry of step clamps gives secure contact on the workpiece while preserving access for tooling and coolant flow. Specifying a standardised component from a reputable maker promotes consistency across fixtures and reduces the need for bespoke solutions, supporting long-term maintainability and inventory rationalisation in the workshop. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating Vertex step clamps into existing fixturing systems or to arrange supply from our European stock. Technical data SKU: 6214 GTIN: 4061905091438 ECLASS: 21170107 Designation: Step Clamp Facts Dimensions: 28 × 64 × 12 mm Bolt thread: M12 T-slot compatibility: 15 mm Weight: 0.125 kg Special features Vertex brand Step-profile clamping element Suitable for standard fixture tables Compact footprint for tight layouts FAQ What T-slot size does this clamp fit? The clamp is designed for 15 mm T-slots and secures to the table via an M12 bolt as specified for the Vertex step clamp (SKU 6214). What are the clamp's external dimensions? Dimensions are 28 × 64 × 12 mm, making the component suitable for compact fixtures and tight installation spaces. How heavy is the clamp and why does that matter? Weight is 0.125 kg, which aids quick repositioning during set-up and reduces handling effort without compromising fixture stability. Is this a Vertex product and what is the SKU? Yes, the component is manufactured by Vertex and listed under SKU 6214 for reference in ordering and inventory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust clamping, compatibility with standard 15 mm T-slots and a compact low-profile design that keeps the work area clear; precise fixing and quick set-up reduce machining variability. Order the Step Clamp directly via Metav Werkzeuge or ask our consultants if technical advice is required. Step Clamp — compact step clamp for 15 mm T-slots with M12 fixing (Vertex) A Step Clamp engineered for secure workpiece retention in t-slot fixtures, suited to milling, drilling and general fixture setups on 15 mm T-slot tables Compact 32×100×19 mm footprint Compatible with 15 mm T-slot systems Secures with M12 bolt Lightweight 0.31 kg for easy handling Stable fixing for consistent machining The clamp is designed for use within professional clamping technology where repeatable results matter. The M12 fastening arrangement provides a secure mechanical connection that reduces micro-movement during cutting and prevents chatter, which improves overall precision of the process. By converting clamp geometry into consistent clamping force, set-up times are shortened and part repeatability is increased, supporting efficient batch production and shorter machine cycle variance. Fits standard T-slot tables without modification Compatibility with a 15 mm T-slot makes integration straightforward on common worktables and fixturing plates. The compact dimensions of 32×100×19 mm ensure the element sits close to the table surface, leaving clearance for tool paths and peripheral fixtures. This compatibility reduces the need for adapter plates and allows the clamp to be incorporated into existing fixture designs without extensive rework, simplifying retrofits and new jigs alike. Low profile and light weight for flexible layouts A compact form combined with a weight of 0.31 kg keeps mass low, which is advantageous when frequent repositioning of clamps is required during setup changes. The low profile reduces obstruction around the cutter and allows closer approach angles for cutting tools, helping to avoid collisions and enabling better access to small or complex parts. The modest weight also makes manual handling easier during fixture assembly and changeover without compromising holding security. Built for workshop reliability and simple specification Manufactured by Vertex, this step clamp offers a straightforward specification that suits a wide range of workshop requirements. The plain design concentrates on reliable function: secure M12 fixing, compatibility with 15 mm t-slots and a compact footprint that integrates into modern fixtures. For procurement and inventory planning the clear specification supports rapid selection for fixtures where reliable, repeatable clamping is a priority. Contact Metav Werkzeuge in Emmerich for availability and integration advice on the Vertex Step Clamp (SKU 6224) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6224 GTIN: 4061905091568 Manufacturer: Vertex Core technical data Dimensions: 32×100×19 mm Weight: 0.31 kg T-slot compatibility: 15 mm Bolt: M12 ECLASS: 21170107 Design and features Designation: Step Clamp SKU: 6224 Brand: Vertex FAQ Which T-slot size is the clamp designed for? The clamp is specified for 15 mm T-slot systems and integrates directly into standard 15 mm t-slot tables without adapters. What bolt size is required for fixing? Fixing is achieved with an M12 bolt; the clamp is designed to work with standard M12 clamping hardware. Is the clamp suitable for CNC milling fixtures? Yes. The Step Clamp (Vertex, SKU 6224) is intended for use in milling and drilling fixtures where repeatable, rigid clamping is required. What are the physical dimensions and mass of the clamp? Dimensions are 32×100×19 mm and the mass is 0.31 kg, providing a low-profile solution that minimises obstruction around the tool path. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable, space-saving clamping with secure M12 fixation and compatibility with 15 mm T‑slot systems; the compact design and low weight support efficient fixture changes and stable machining. Order the Step Clamp directly via Metav Werkzeuge or ask our consultants if needed. Step Clamp — compact workholding clamp with M12 bolt for 15 mm T‑slot (Vertex) A Step Clamp designed for secure, space-saving clamping in workshop and light industrial fixturing, compatible with standard 15 mm T‑slot systems. Compact step clamp design Fits 15 mm T‑slot M12 clamping bolt included Stable clamping in limited space The compact geometry and low mass of this workholding component ensure reliable clamping where table real estate is limited. With external dimensions of 32 x 150 x 22 mm and a mass of 0.59 kg, the element minimises overhang while maintaining contact pressure through an M12 clamping bolt. This arrangement reduces vibration transfer and simplifies fixture layout, which is particularly advantageous for small-batch milling, drilling and finishing tasks. Fast integration with standard tooling systems Designed for compatibility with the industry-standard 15 mm T‑slot, the clamp enables rapid positioning and repeatable setup on many machine tables and modular fixtures. The central M12 thread provides proven clamping force with common hex or socket tooling, so downtimes for changeover are kept to a minimum. Clear mechanical interfaces permit predictable torque application and straightforward maintenance planning for production environments. Durable performance that supports shop efficiency The step form factor secures workpieces close to the clamping surface, improving rigidity for machining operations and reducing the need for secondary supports. The compact profile simplifies storage and handling in busy workshops and aligns with a workflow that prioritises quick reconfiguration. Supplied by a recognised manufacturer, the component contributes to a consistent fixturing strategy that reduces setup variability across jobs. For dependable, space-saving workholding choose the Vertex Step Clamp and contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6234 GTIN: 4061905091513 eClass: 21170107 Facts Dimensions: 32 x 150 x 22 mm Weight: 0.59 kg T‑slot: 15 mm Clamping bolt: M12 Special features Step clamp design for low-profile hold-down Compact form for tight fixture spaces Suitable for standard 15 mm T‑slot systems M12 fixation for proven clamping performance FAQ What T‑slot size is this clamp designed for? The clamp is designed for a 15 mm T‑slot, making it suitable for tables and fixtures that use this standard. Which clamping bolt does the product use? The unit is secured with an M12 clamping bolt, ensuring reliable fixation with commonly available fastening tools. What are the dimensions and weight of the clamp? The clamp measures 32 x 150 x 22 mm and weighs 0.59 kg, providing a compact, low-mass solution for tight setups. Is this clamp suitable for heavy-duty machining? The step design improves rigidity for many machining tasks, but heavy-duty applications should consider overall fixture design and machine capability rather than the clamp alone. What is the manufacturer and SKU for ordering? This product is manufactured by Vertex and is listed under SKU 6234 for ordering and reference. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust 150 ft‑lb torque, dependable pneumatic actuation and straightforward electrical compatibility for reliable tool retention and stable cycle times. Order the pneumatic drawbar directly via Metav Werkzeuge or consult the Metav team for application advice. Pneumatic Drawbar PD-150-NT40 — 150 ft‑lb torque, NT40 interface (Vertex) The Pneumatic Drawbar PD-150-NT40 is a pneumatic tool‑holding unit engineered for rapid, repeatable clamping of NT40 toolholders in production and jobbing environments. 150 ft‑lb torque capacity Operates at 90 psi / 6.3 kg/cm² Rated speed up to 3,000 rpm Supply: AC 110V/220V or DC 24V Reliable clamping that reduces rework and tool slippage The core advantage of a pneumatic drawbar with a 150 ft‑lb torque rating is consistent axial retention force during machining, which reduces unexpected loosening and the need for rework. Pneumatic actuation converts compressed air pressure into a repeatable clamping stroke; at 90 psi / 6.3 kg/cm² the mechanism produces sufficient force for most general machining tasks. For procurement and production planners this means fewer tool‑related stoppages and a measurable improvement in process stability, without complex hydraulic systems. High‑speed compatibility and straightforward electrical options Designed to operate at up to 3,000 rpm, the unit suits many medium‑speed spindle applications while maintaining concentricity and balance. The drawbar accepts NT40 toolholders, allowing easy integration into existing spindle interfaces. Electrical compatibility is deliberately flexible: the unit supports AC 110V or 220V supplies and DC 24V, simplifying connection to different machine control systems and auxiliary power arrangements. The combination of rotational rating and versatile supply options reduces retrofit effort and shortens installation time. Serviceable design for steady production performance At a weight of 9.8 kg the assembly balances robustness with manageable handling during installation and maintenance. Routine checks of the pneumatic lines and quick visual inspections of the coupling mechanism are usually sufficient to maintain reliable function. The design from Vertex emphasises durability and ease of replacement parts, helping workshops achieve predictable uptime. Documented specifications such as torque, speed and air pressure support risk assessments and preventative maintenance planning without needing specialist measurement equipment. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex PD-150-NT40 pneumatic drawbar into production, including compatibility checks and delivery options. Technical data SKU: PD-150-NT40 GTIN: 4061905092367 Manufacturer: Vertex Machinery Works Co., Ltd. Product type: Pneumatic drawbar (Luftdruck Zugstange) Core specifications Torque: 150 ft‑lb Speed: 3,000 rpm Weight: 9.8 kg Air pressure: 90 psi / 6.3 kg/cm² Supply voltage: AC 110V or 220V, DC 24V Features and notes NT40 toolholder interface eClass: 23309104 UID: PD-150-NT40 FAQ What spindle taper does this drawbar fit? The PD-150-NT40 is specified for NT40 toolholders; compatibility with NT40 spindles and toolholders is indicated by the model designation. What air supply is required for reliable operation? Reliable operation requires a compressed air supply at 90 psi / 6.3 kg/cm², which is stated for the unit and ensures consistent pneumatic actuation. Can the unit run at high spindle speeds? The drawbar is rated for up to 3,000 rpm, which supports a wide range of machining tasks while keeping balance and retention performance. Which electrical supplies are supported for integration? The unit accepts AC 110V or 220V and DC 24V, allowing straightforward connection to common machine power systems. Who manufactures this drawbar and where is it produced? The drawbar is manufactured by Vertex Machinery Works Co., Ltd.; technical and production details are provided by the manufacturer for the PD-150-NT40. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan