Ausstattungen für Fräsmaschinen

Take advantage of soft, protective clamping and a precision fit for VQC-series vises, combined with compact dimensions for space-saving workshop integration. Benefit from stable handling owing to the component mass and order the replacement jaws directly via Metav Werkzeuge or consult the team for application advice. VQC-125FJ Soft Jaws — replacement jaws for VQC vises, precision fit by Vertex The VQC-125FJ is a set of soft jaws designed to protect workpiece surfaces while providing a reliable clamping interface for VQC-series bench vises. Soft protective jaw faces Precision fit for VQC vises Compact 124.5 x 91 x 60 mm form Mass 4.96 kg for stable clamping Secure clamping that protects finished surfaces The primary advantage of soft jaws lies in secure holding without surface damage. Designed for use with VQC-series bench vises, these jaw inserts provide a cushioned contact area that minimises marring on coated, polished or delicate workpieces. The geometry ensures a precision fit, so repeatability is improved and setup time is reduced. For applications where appearance and dimensional integrity matter, the protected contact surface helps maintain tolerance chains and reduces the need for rework. Compact design that integrates into existing workflows With external dimensions of 124.5 x 91 x 60 mm, these jaws occupy minimal bench space while maintaining full functionality. The low-profile form factor allows straightforward installation into VQC clamping systems and supports efficient handling in constrained setups. The comparatively substantial mass of 4.96 kg contributes to steady holding forces during light to medium machining and assembly tasks, improving process stability without demanding additional fixturing. Practical advantages for everyday workshop use These soft jaw inserts simplify handling of sensitive components and expand the range of parts that can be safely clamped in a standard vise. The solution is suited to precision workshops, small-batch production and service environments where repeatable protection is required. The simple, application-oriented design reduces adjustment time and, when paired with a consistent clamping routine, supports higher throughput and fewer rejects. Technical teams will value the compatibility with VQC vises and the predictability it brings to routine operations. Contact Metav Werkzeuge for tailored guidance on integrating Vertex soft jaws into existing clamping systems and secure procurement from our Emmerich distribution hub Technical Data Article number: VQC-125FJ GTIN: 4061905091360 ECLASS: 21029107 Manufacturer: Vertex Facts Dimensions: 124.5 x 91 x 60 mm Weight: 4.96 kg Special features Soft jaws For VQC vises FAQ Are these jaws compatible with all VQC-series vises? Compatibility is specified for VQC-series vises; the VQC-125FJ soft jaws are designed to match the clamping geometry of VQC bench vises for a precision fit. What workpiece surfaces are protected by these soft jaws? The soft jaw faces on the VQC-125FJ reduce marring on painted, plated or polished surfaces and are suitable where surface appearance and tolerances are critical. How does the mass of the jaws affect clamping performance? The 4.96 kg mass contributes to stable clamping and helps resist vibration during light machining, enhancing the holding reliability of the VQC-125FJ set. Can the VQC-125FJ be used in small or crowded workspaces? Yes, the compact dimensions of 124.5 x 91 x 60 mm make these jaws a space-efficient option for workshops with limited bench area. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of axial drive reliability, smooth jaws for low-mark clamping and compact dimensions to streamline fixture setups and protect delicate components; order the product directly via Metav Werkzeuge or consult our specialists for compatibility guidance. VNC-5AD Axial Drive with Smooth Jaws – Clamping Accessory by Vertex The VNC-5AD is an axial-drive clamping accessory designed to deliver consistent holding force and gentle contact for parts on compatible VNC-FV clamping systems. Axial drive for consistent clamping Smooth jaws minimise workpiece marking Compact size 124 x 78 x 52 mm Lightweight construction at 2.08 kg Precise clamping that supports repeatable production The axial drive mechanism provides a direct, linear clamping action that converts spindle movement into uniform holding force. This design reduces lateral play and supports repeatable positioning, which is especially valuable in series production and inspection tasks. By avoiding variable radial forces, the unit helps maintain process stability and reduces rework, delivering measurable efficiency gains in every shift. Gentle jaws to protect finished surfaces Equipped with smooth jaws, this clamping accessory is optimised for components where surface integrity matters. The jaw finish spreads contact pressure more evenly than serrated alternatives, thereby reducing marking on soft or pre-finished parts. For applications where cosmetic appearance or tight tolerances are critical, the smoother contact improves first-pass yield and lowers downstream corrective work. Compact footprint for flexible integration With dimensions of 124 x 78 x 52 mm and a weight of 2.08 kg, the unit occupies minimal space on fixtures and is suitable for retrofitting into existing clamping stations. The compact form factor simplifies machine integration and leaves room for additional tooling or sensors, enabling more flexible cell layouts without compromising stability. The accessory’s format supports quick changeovers and keeps the work envelope efficient. Confidence through proven supply and local expertise Supplied by Vertex, the component is intended for use with VNC-FV systems and follows established standards for clamping accessories. Working with Metav Werkzeuge brings the benefit of a European quality filter: extensive product range, dependable logistics from Emmerich and decades of precision experience. This combination ensures reliable availability and specialist advice when adapting the unit to specific workflows. Contact Metav Werkzeuge to confirm compatibility with existing VNC-FV equipment and to arrange supply of the Vertex VNC-5AD axial drive with smooth jaws; Metav’s consultants in Emmerich are available by email or phone for technical clarification. Technical data Article number: VNC-5AD GTIN: 4061905092657 Compatible with: VNC-FV eClass: 21130302 Facts Dimensions: 124 x 78 x 52 mm Weight: 2.08 kg Special features Axial drive Smooth jaws Manufacturer: Vertex FAQ Is the unit compatible with other clamping systems? The VNC-5AD is specified for use with VNC-FV systems; compatibility with other systems should be checked against mounting interfaces and clamping stroke requirements. Will the smooth jaws prevent part marking on delicate materials? Smooth jaws on the Vertex VNC-5AD reduce localised pressure peaks and help minimise surface marking on sensitive components compared with serrated alternatives. How does the axial drive improve repeatability? Axial-drive action provides direct linear clamping force, reducing lateral force variation and supporting repeatable positioning in cyclic production. What are the installation space requirements? The compact dimensions (124 x 78 x 52 mm) and a weight of 2.08 kg make the unit suitable for tight fixtures; check available clearance on the VNC-FV station prior to installation. Is the VNC-5AD ready to install or are additional parts required? The accessory is supplied as described; any adapter plates or mounting hardware required for a specific machine interface must be confirmed before ordering. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust heat-treated steel, a precise M24×3 thread and a 125 mm length for secure clamping and consistent fixture performance. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw – Vertex, M24×3 thread, 125 mm Clamping screw designed for secure fixture and workholding in industrial clamping technology, offering reliable engagement and durable construction. Heat-treated steel construction M24×3 thread for strong engagement 125 mm length for deep clamping Precision-made, SKU 1385M Durable design for reliable workholding The robust construction, manufactured from heat-treated steel, delivers long service life and resistance to deformation under repeated load. This results in fewer interruptions for maintenance and a lower need for replacement parts, supporting continuous production. The solid build also reduces micro-movements in fixtures, improving overall repeatability and contributing to stable tolerances in serial machining and assembly. Precision thread for consistent clamping force A standard M24×3 thread with defined pitch ensures positive engagement with mating nuts or threaded holes, providing consistent axial force when torqued. The metric coarse pitch is chosen for high-load clamping situations and simplified mating with common fixture components. The geometric accuracy of the thread reduces the risk of cross-threading and supports predictable torque-to-preload behaviour, which enhances setup reliability and process efficiency. Faster setups and fewer production interruptions With a 125 mm length and carefully controlled dimensions, integration into jigs, fixtures and workholding systems is straightforward, reducing setup time and helping to maintain cycle-time targets. The component’s weight and profile are optimised for handling and installation, while the precise manufacture minimises the need for rework. Sourcing through Metav Werkzeuge provides access to a quality filter and dependable logistics, supporting steady supply to the workshop bench. Contact Metav Werkzeuge in Emmerich for procurement or technical advice on the clamping screw and complementary workholding components; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1385M GTIN: 4061905090264 Facts Weight: 0.35 kg Length: 125 mm Thread: M24x3P Special features Material: Heat-treated steel Manufacturer: Vertex FAQ What are the thread and overall length of this clamping screw? The clamping screw features a metric M24×3 thread and an overall length of 125 mm, suitable for deep clamping applications. What material is the component made from and why does it matter? The item is made from heat-treated steel, providing enhanced strength and wear resistance; this improves durability under repeated clamping cycles for Vertex clamping screws. Is the clamping screw suitable for standard fixture assemblies? Yes, the geometric accuracy and the M24×3 thread make the part compatible with standard nuts and tapped holes commonly used in jigs and fixtures. How does the clamping screw support repeatable setups? Precision machining of the thread and controlled length ensure consistent engagement and preload, which helps maintain repeatable clamping force across assemblies using the Vertex clamping screw (SKU 1385M). How is the product identified for ordering and inventory? Identification is by SKU 1385M and GTIN 4061905090264, both shown here for clear ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of M8 x 1.25 thread accuracy and a heat-treated steel body to secure fixtures with consistent clamping force; combine that with the compact 125 mm length for deep or confined assemblies. Order directly via Metav Werkzeuge or consult our specialists for tailored advice and dependable European supply. Clamping screw 1325M – M8 x 1.25 thread, 125 mm, Vertex The Clamping screw 1325M is a metric clamping fastener designed for secure fixture applications where repeatable positioning and compact dimensions are required M8 x 1.25 metric thread precision 125 mm overall length for deep reach Heat-treated steel for high durability Lightweight at 0.04 kg for easy handling Consistent clamping where it matters The metric M8 x 1.25 thread provides a familiar standard for industrial fixtures and tooling, enabling reliable engagement with nuts and threaded holes. Accurate thread geometry reduces play and ensures precision when tightening, which translates into repeatable clamping forces and fewer re-adjustments during set-up. For workshops and small production lines this means faster fixture changes and less downtime, supporting a smoother workflow and higher throughput. Durable construction for long service life Manufactured from heat-treated steel, the component resists deformation under load and maintains its mechanical properties through repeated use. Heat treatment increases fatigue strength, so the screw retains clamping integrity over many cycles. The combination of a robust material and metric thread standards supports applications where longevity and resistance to wear are critical, offering a practical balance between toughness and machinability. Compact dimensions that improve accessibility With an overall length of 125 mm and a mass of roughly 0.04 kg, the fastener is suitable for confined spaces and multi-component assemblies where longer bolts would be impractical. The compact profile enables secure fixing within tight fixture layouts while keeping handled weight low for manual assembly tasks. Reduced mass also contributes to easier inventory handling and faster assembly operations. Specified for dependable sourcing and integration The SKU is supplied by Vertex and identified for procurement and traceability in industrial supply chains. As a standard metric clamping element, it integrates smoothly into jigs, fixtures and modular tooling systems that rely on consistent thread forms and dimensions. Procurement via a reliable distributor ensures steady availability and a transparent supply chain, supporting stable production planning. For reliable stock of Vertex clamping screws and expert advice on integrating the 1325M into production, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 1325M GTIN: 4061905090431 ECLASS: 21022190 Facts Length: 125 mm Thread: M8 x 1.25 Weight: 0.04 kg Special features Material: Heat-treated steel Compact metric clamping screw design Manufacturer: Vertex FAQ What thread form does the clamping screw use? The Vertex clamping screw (SKU 1325M) uses an M8 x 1.25 metric thread suitable for standard M8 fittings and threaded holes. What material is the fastener made from? The fastener is made of heat-treated steel, which improves strength and fatigue resistance for repeated clamping use. What is the overall length and mass of the part? The overall length is 125 mm and the weight is approximately 0.04 kg for the Vertex 1325M. Is the product identified for procurement and traceability? Yes, the part is listed with GTIN 4061905090431 and SKU 1325M for clear identification in ordering and inventory systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of robust heat-treated steel, a standard M12×1.75 thread and a 125 mm overall length to secure reliable clamping and simplified inventory management. Order via Metav Werkzeuge for consistent supply or request technical guidance from the Metav consultants. Clamping screw 1345M — M12×1.75 thread, 125 mm length (Vertex) Clamping screw 1345M is a straightforward fastening solution for workshop and industrial clamping tasks, designed to provide long service life and dependable fixation in assembly and fixturing applications. Heat-treated steel for long service life M12×1.75 thread for standard compatibility 125 mm length for extended reach Lightweight 0.09 kg for easy handling Durable material and engineered geometry for secure clamping The use of heat-treated steel ensures increased hardness and improved resistance to wear compared with untreated alternatives, making the fastener suitable for repeated engagement in production environments. The engineered geometry of the shank and head supports consistent contact and clamping precision, reducing the risk of loosening under vibration. For procurement and maintenance planning, the combination of material quality and simple design minimises replacement frequency and supports predictable lifecycle costs. Standardised thread and dimensions for seamless workshop integration A genuine M12×1.75 thread provides compatibility with a broad range of nuts, threaded inserts and components commonly stocked in industrial supply chains, which reduces the need for special adaptors. The 125 mm overall length increases reach for assemblies with deeper clamp paths or thicker workpieces and helps avoid unnecessary modifications to existing tooling. Together, these standardised dimensions streamline stock management and enable quick retrofits in jigs and fixtures, enhancing operational efficiency. Practical handling and reliable supply for everyday operations At only 0.09 kg, the fastener combines sufficient mass for robust clamping with low weight for ease of handling during repetitive assembly tasks, shortening cycle times at assembly stations. The uncomplicated design supports straightforward inspection and replacement routines, while the Vertex origin underlines consistent manufacturing standards. For projects that demand predictable delivery and quality control, the availability through Metav Werkzeuge further strengthens supply-chain reliability and reduces procurement complexity. Contact Metav Werkzeuge for tailored quantities or technical advice on clamping solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and lead times. Technical data Article number: 1345M GTIN: 4061905089237 Facts Length: 125 mm Thread: M12×1.75 Weight: 0.09 kg Special features Heat-treated steel Clamping screw Brand: Vertex FAQ What thread standard does this fastener use? The clamping screw 1345M is manufactured with an M12×1.75 thread, ensuring compatibility with standard M12 nuts and threaded components. What is the overall length of the fastener? The overall length is 125 mm, which provides additional reach for deeper clamping applications. What material is the fastener made from? This fastener is made from heat-treated steel, chosen for enhanced hardness and wear resistance suited to repetitive use. Is the fastener lightweight enough for manual assembly? Yes, at 0.09 kg the clamping screw 1345M offers low weight for comfortable handling during manual assembly while maintaining robust clamping capability. Can this clamp screw be integrated into existing jigs and fixtures? The standardised M12×1.75 thread and common length make integration straightforward; the fastener is suitable for retrofitting into existing fixtures without special adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of heat-treated steel, a standard M10×1.5 thread and a compact 125 mm length for reliable clamping performance in production and workshop settings. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Clamping screw 1335M – M10×1.5 thread, 125 mm, Vertex The Clamping screw 1335M provides secure workpiece fixation for general clamping applications and light-to-medium assembly tasks Heat-treated steel for enhanced durability M10×1.5 thread for standardised mounting 125 mm overall length for extended reach Precision-manufactured Vertex component Reliable fixation for consistent production flow The clamping bolt delivers consistent clamping force thanks to its standard M10×1.5 metric thread combined with a precisely controlled shank length of 125 mm, allowing stable engagement in common clamping fixtures. This geometry reduces set-up time in repetitive operations and supports predictable clamping behaviour, which in turn contributes to improved throughput. The use of heat-treated steel increases wear resistance and maintains clamping integrity under cyclical loads, providing an efficient solution for workshop and industrial environments where repeatability matters. Minimal maintenance and long service intervals Made from heat-treated steel, the fastener requires little upkeep in standard operating conditions. The material choice minimises deformation under load and resists surface fatigue, extending replacement intervals and reducing unplanned downtime. The part’s compact mass of 0.06 kg makes handling straightforward while the standardised thread means replacement components are readily available, simplifying inventory management in maintenance and production departments. Compatibility with established metric systems The M10×1.5 thread conforms to widely used metric standards, ensuring compatibility with common clamping plates, threaded holes and accessories. This standardisation reduces the need for custom adaptors and supports flexible toolholding strategies across multiple machines. Precision manufacturing tolerances ensure smooth engagement and a secure fit, which helps to avoid misalignment and slippage during machining or assembly operations. Built for workshop practicality and traceability As a Vertex-manufactured component, this clamping screw combines simple geometry with robust material treatment to deliver a dependable fastening element. Traceability is supported by the clear SKU 1335M and GTIN record, facilitating stock control and reordering. Where precision and dependable fixation are priorities, this fastener functions as a practical, cost-effective component within broader clamping systems. For procurement or technical advice on Vertex clamping components contact Metav Werkzeuge — our consultants provide product guidance and compatibility checks from Emmerich, ensuring a reliable supply chain for precision workshop needs Technical Data Article number: 1335M GTIN: 4061905094408 Manufacturer: Vertex Facts Length: 125 mm Weight: 0.06 kg Thread: M10×1.5 pitch Special features Material: heat-treated steel Precision-made for clamping applications Standard metric thread for broad compatibility Vertex production quality FAQ What material is the clamping screw made from? The clamping screw 1335M is manufactured from heat-treated steel, offering increased wear resistance and durability for repeated clamping cycles. Which thread specification does the fastener use? The fastener uses a M10×1.5 metric thread, making it compatible with standard clamping plates and threaded fixtures common in industrial setups. Is the length suitable for deep clamping applications? With an overall length of 125 mm, this clamping bolt is designed to reach deeper engagement points while maintaining secure fixation in many workshop and assembly configurations. How is stock and reordering handled? The component is listed under SKU 1335M and GTIN 4061905094408 to facilitate inventory tracking and straightforward reordering through Metav Werkzeuge. Can this component be used in high-cycle production environments? Yes. The heat-treated material and precision manufacture of the clamping screw make it suitable for high-cycle applications where consistent clamping performance is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust combination of heat‑treated steel construction and a standard M14x2P thread for reliable, repeatable clamping. The solid design and 125 mm length ensure secure engagement and long service life. Order the part or consult Metav Werkzeuge for specification support. Clamping screw 1345MA — M14x2P thread, heat‑treated steel (Vertex) A heavy‑duty clamping screw in heat‑treated steel, designed for secure fixturing and industrial workshop applications where consistent holding force and material resilience are required Robust heat-treated steel construction Standard M14x2P thread for secure mounting 125 mm overall length for deep engagement Precision-made for consistent clamping force Consistent clamping for reliable production flow The clamping screw provides a predictable clamping action thanks to its standardised M14x2P thread and controlled geometry. In production environments where repeatable setups matter, the combination of thread specification and 125 mm overall length reduces adjustment time and contributes to steady cycle times. The part’s measured mass of 0.13 kg supports precise load calculations during fixture design, enabling planners to balance clamping forces without guesswork. Durable construction that reduces maintenance interventions Constructed from heat‑treated steel, the component resists deformation under sustained load and keeps tolerances longer than untreated alternatives. The material treatment increases fatigue resistance and wear performance, which translates into fewer replacements and lower downtime across repetitive tasks. The Vertex origin and the coded article reference (1345MA) indicate consistent manufacturing traceability and batch-to-batch uniformity for quality‑oriented workshops. Easy specification and integration into existing setups The standardised thread pitch and nominal diameter align with common clamping fixtures, simplifying retrofit and new installations. Technical planners can use the clear numeric data — M14x2P, 125 mm, 0.13 kg — directly in CAD models and fixture lists without conversion. Where a metric thread standard is required, this component fits established tooling patterns, enabling fast procurement and reliable interchangeability within typical industrial clamping systems. Contact Metav Werkzeuge in Emmerich for application advice or to request compatibility checks with existing fixtures — direct support is available by email or phone and procurement can be arranged from stock Technical Data Article number: 1345MA GTIN: 4061905091537 Manufacturer: Vertex Facts Thread: M14x2P Length: 125 mm Weight: 0.13 kg Special features Material: Heat‑treated steel Product type: Clamping screw eClass: 21022190 FAQ What materials is this clamping screw made from? The clamping screw is manufactured from heat‑treated steel, offering higher wear resistance and improved fatigue performance compared with untreated steel. Is the thread compatible with standard metric fixtures? Yes, the M14x2P thread conforms to common metric thread standards and is suitable for integration with typical clamping hardware and fixtures. How long is the part and what is its mass? The overall length is 125 mm and the mass is 0.13 kg, values provided for fixture design and load calculations. Can the Vertex 1345MA be traced to a production batch? Yes, the item is listed under the article number 1345MA and GTIN 4061905091537, which supports traceability and quality control procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of heat‑treated steel construction, a precise M16×2 thread and a 125 mm overall length ensures stable, reproducible clamping in fixture work; order the clamping screw directly via Metav Werkzeuge or contact the consultants for application advice. Vertex 1355M clamping screw — M16×2 thread, 125 mm length The Vertex 1355M clamping screw is a robust fastening component designed for workshop fixtures and industrial clamping applications, delivering reliable retention and consistent repeatability. Heat-treated steel construction M16×2 fine thread 125 mm overall length Precisely machined for secure clamping Consistent clamping force for repeatable setups A threaded clamping solution with a M16×2 thread and accurately turned shank provides dependable axial force across repeated cycles. The defined thread profile converts applied torque into predictable clamping pressure, which reduces variability between setups and supports process stability. This level of mechanical consistency is particularly valuable in jigs, toolholding and assembly fixtures where reproducibility is essential for quality control. Long service life from heat‑treated construction Manufactured from heat‑treated steel, the component combines strength with enhanced wear resistance. The thermal treatment increases hardness and fatigue endurance, so the screw sustains repeated loading without premature deformation. In environments with frequent assembly and disassembly, this material choice extends component life and lowers the frequency of replacements, contributing to reduced downtime and lower life‑cycle costs. Seamless integration into existing fixtures and jigs With an overall length of 125 mm and standard thread size, the part easily mates with common nuts, threaded inserts and clamping elements used across workshops. The geometrical compatibility enables straightforward retrofitting into existing fixtures without redesign, simplifying inventory management and ensuring that machine‑side adjustments remain minimal. The result is quicker changeovers and more efficient use of bench and machine time. Precision machining reduces setup time Careful machining and dimensional control minimise play and misalignment in assemblies. A precisely produced thread and shank reduce the risk of cross‑threading and enable smooth engagement, which shortens component replacement and tool setup times. Where repeat accuracy matters, engineered tolerances help to maintain positional stability under load, enabling faster inspection cycles and fewer corrective actions. Suited to workshop and industrial demands Compact and purposeful, the component balances weight and robustness; at around 0.16 kg, it is easy to handle while still providing solid mechanical performance. The combination of standard interface and durable construction makes it appropriate for small workshops as well as larger industrial operations that require dependable clamping hardware for fixtures, presses and assembly stations. For technical specification or supply enquiries regarding the Vertex 1355M clamping screw, contact Metav Werkzeuge in Emmerich for informed advice and secure delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 1355M GTIN: 4061905094453 Manufacturer: Vertex Core specifications Thread: M16×2 Length: 125 mm Weight: 0.16 kg Features Heat‑treated steel Precision‑machined thread Designed for fixture and clamping use FAQ What material is the clamping screw made from? The Vertex 1355M clamping screw is made from heat‑treated steel, chosen for enhanced hardness and wear resistance. Which thread size does the screw use and is it standard? The component features a M16×2 thread, a common metric size suitable for standard nuts and inserts. What is the overall length of the screw? The overall length is 125 mm, which facilitates integration into typical fixtures and jigs. Is the screw suitable for repeated assembly and disassembly? Yes, the heat treatment and precision machining of the Vertex 1355M make it well suited to frequent use with minimal wear. How much does one clamping screw weigh? A single unit weighs approximately 0.16 kg, balancing handling convenience with mechanical robustness. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a combination of heat-treated steel durability and a precise M20 x 2.5 thread for secure fixture retention and long service intervals; the 125 mm length allows deep engagement in demanding clamping setups. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw 1375M by Vertex — Heat-treated steel, M20 x 2.5 thread A clamping screw 1375M engineered for secure fixture and toolholding in industrial clamping systems and maintenance applications. Heat-treated steel for high wear resistance Metric thread M20 x 2.5 pitch 125 mm overall length for deep engagement 0.25 kg mass for predictable handling Engineered for repeatable clamping and component security The fastening geometry is designed to deliver consistent clamping with every installation. Constructed from heat-treated steel, the fastener resists deformation and preserves thread integrity under repeated torqueing, which reduces downtime for replacements. The M20 x 2.5 thread is a standard metric specification that ensures compatibility with common industrial fixtures and nuts; the coarse pitch helps convert torque into reliable axial force for secure holding in tooling plates and workholding assemblies. Simple integration into existing systems with clear mechanical benefits With an overall length of 125 mm, the fastener provides sufficient engagement for deep-seated connections while maintaining manageable installation effort. The defined mass of 0.25 kg contributes to predictable handling and balanced assembly processes, important in automated or manual fixture routines. The metric thread form and robust material choice simplify procurement and maintenance planning, supporting efficient inventory control and reduced machine stoppages through fewer fastener-related failures. Support for productive workflows and long-term reliability Selecting a component manufactured by Vertex delivers practical benefits in everyday shop-floor scenarios: fewer replacements, steady clamping performance and compatibility with standard metric accessories. The combination of wear resistance and precise thread dimensions contributes to lower life-cycle costs and steadier process outcomes, which supports lean production goals. Metav Werkzeuge acts as a local quality filter for the European market, offering a dependable supply chain and expert advice for integrating these fasteners into larger assemblies. For ordering advice, availability or specification checks for the Vertex clamping screw 1375M, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 1375M GTIN: 4061905094484 Manufacturer: Vertex Facts Length: 125 mm Weight: 0.25 kg Thread: M20 x 2.5 pitch Special features Material: Heat-treated steel Product type: Clamping screw ECLASS: 21022190 FAQ What is the thread specification of this fastener? The clamping screw 1375M uses a metric M20 x 2.5 thread suitable for standard industrial fixtures and nuts. How long is the clamping screw and what does that mean for installation? The overall length is 125 mm, providing deeper engagement for secure connections in tooling plates or stacked fixture setups. What material is used and how does it affect service life? Manufactured from heat-treated steel, the 1375M offers improved wear resistance and reduced risk of thread deformation under repeated assembly cycles. Is this component suitable for repeat use in production fixtures? Yes, the combination of robust material and standard metric thread makes the Vertex clamping screw 1375M appropriate for repeated use in production and maintenance environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust, cast-iron construction combined with a 30 kN clamping force and 0.01 mm repeatability for reliable, high-precision workholding; order the hydraulic machine vice directly via Metav Werkzeuge or contact our consultants for configuration support. VNC-125FV Hydraulic Machine Vice — 30 kN clamping force, 0.01 mm accuracy (Vertex) A hydraulic machine vice, the VNC-125FV, designed for precision clamping in milling and machining operations across versatile fixture setups. 30 kN clamping force for secure workholding 0.01 mm repeatability for high-precision machining Modular design for flexible fixture configurations Cast iron body for damping and long-term stability Consistent precision that keeps production on track The vice delivers 0.01 mm repeatability, a level of precision that supports tight tolerances and reduces rework. With a sustained 30 kN clamping force the unit ensures workpieces remain stable during heavy cuts, which directly contributes to improved surface finish and longer tool life. The mechanism is engineered for minimal backlash so setup times are shortened; the result is a measurable increase in throughput and a reduction in scrap rates for small- to medium-batch machining. Modular system for flexible fixturing and fast changeovers A modular concept enables simple adaptation to different tasks: the vice accepts jaw configurations with 125 x 180 mm or 125 x 250 mm footprint options, allowing a single workholding platform to cover varied part geometries. This flexibility reduces the need for multiple dedicated fixtures and streamlines component handling on the machine table. The modular approach also aids inventory management by concentrating compatible accessories around one core unit. Robust construction that stabilises machining and lowers maintenance Built from cast iron, the vice’s mass and damping characteristics counteract chatter and vibration during aggressive cutting, supporting consistent machining results. The unit’s overall mass of 37 kg and a mounting height of 126 mm provide a stable centre of gravity for secure clamping; the choice of materials and hydraulic actuation reduces wear on mechanical linkages and cuts routine maintenance intervals. These design choices contribute to steady production with limited intervention. Contact Metav Werkzeuge in Emmerich for specification advice on the Vertex VNC-125FV hydraulic vice and to arrange delivery from our German stock: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: VNC-125FV GTIN: 4061905090721 Manufacturer: Vertex Facts Clamping force: 30 kN Accuracy / repeatability: 0.01 mm Weight: 37 kg Height: 126 mm Dimensions: 125 x 180 mm; 125 x 250 mm Special features Material: Cast iron Type: Hydraulic Modular design eClass: 21020601 ETIM: EC002173 FAQ What clamping force does the vice provide? The vice delivers a clamping force of 30 kN, giving secure workholding for demanding milling operations with the Vertex VNC-125FV hydraulic vice. How precise is the workholding? Repeatability is specified at 0.01 mm, enabling stable, high-precision results for components requiring tight tolerances. Which jaw widths are available for fixturing? The unit supports configurations with 125 x 180 mm and 125 x 250 mm footprints, allowing flexible adaptation to part sizes. What materials are suitable for machining with this vice? The vice’s robust cast-iron construction is suitable for typical metalworking applications; its stability benefits operations on steels, aluminium and similar workpiece materials when paired with appropriate cutting parameters. How heavy is the vice and what is the mounting height? The vice weighs 37 kg and has a mounting height of 126 mm, providing a stable base for machining and improved vibration damping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine precise L-stop geometry, compact dimensions and stable mass to secure repeatable workholding and reduce setup time. Order the L-stop directly via Metav Werkzeuge or consult our advisers for compatibility and fast supply. VQC-125FPM L-stop for VQC vices — compact 125 x 54 x 37 mm (Vertex) The VQC-125FPM is an L-stop designed for use with VQC machine vices to provide accurate and repeatable part positioning in milling and machining setups. L-stop for VQC vices Compact 125 x 54 x 37 mm Weighs 1.06 kg for stable positioning Ensures repeatable part positioning Accurate positioning that reduces machining time The L-stop delivers a straightforward method for establishing a fixed datum that improves cycle consistency and reduces indexing errors. By providing a defined lateral and vertical reference, the L-stop simplifies fixture set-up and shortens the time needed for repeated clamping operations. The design supports predictable toolpaths and minimises rework, helping to maintain throughput in batch production and small-series manufacture. Emphasis on stable locating surfaces translates directly into fewer adjustments and more efficient use of machine time. Compact format for flexible fixture layouts With overall dimensions of 125 x 54 x 37 mm and a weight of 1.06 kg, this locating stop fits into constrained vise beds without compromising rigidity. The compact footprint allows multiple stops or auxiliary fixturing to be arranged in close proximity, enabling nested workholding or multi-fixture setups on a single vice. The modest size assists in preserving access to tooling while the mass contributes to resistance against displacement under cutting forces, so clamping remains consistent throughout the machining cycle. Seamless integration with VQC clamping systems Intended specifically for VQC series vices, the locating device is described as an L-stop for VQC vices, ensuring compatibility with established clamping patterns and T-slot arrangements. Integration into an existing clamping system avoids the need for extensive retrofitting and supports swift changeovers between components. This compatibility reduces downtime during tool changeover and supports lean work processes where rapid, repeatable fixturing is required. Practical benefits and quality assurance Selecting this locating stop supports measurable improvements in repeatability and process reliability. The simple geometry means inspection and maintenance are straightforward, while the clear specification of dimensions and mass allows engineers to predict behaviour under load. Sourcing through a specialist partner provides the additional assurance of a controlled supply chain and consistent product quality, which is particularly important for workshops that standardise fixturing components across multiple machines. Request a compatibility check or order through Metav Werkzeuge in Emmerich — our consultants will advise on fitment and delivery from stock Technical Data SKU: VQC-125FPM GTIN: 4061905092428 Article designation: L-stop Designed for: VQC vices ECLASS: 21029210 Facts Dimensions: 125 x 54 x 37 mm Weight: 1.06 kg Special features Designation: L-stop Application: for VQC vices Gallery images available FAQ What is the primary function of this locating stop? The locating stop provides a fixed reference for lateral and vertical positioning when clamping components in a vice, improving repeatability in machining operations. Is the VQC-125FPM compatible with all VQC series vices? Compatibility is stated for VQC vices; the VQC-125FPM was designed to match common VQC clamping patterns and should integrate with standard VQC vice arrangements. How do the dimensions affect fixture planning? The compact 125 x 54 x 37 mm footprint allows close placement within the vice and supports multi-stop layouts without excessive space demand. Can the locating stop withstand heavy cutting forces? The mass of the part (1.06 kg) contributes to stable seating and resistance to displacement; however, overall performance depends on clamping strategy and cutting parameters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of heat-treated steel construction, an M18x2.5 thread and a 125 mm overall length delivers secure, repeatable clamping while keeping tool changeover simple; rely on robust fastening and consistent performance for uninterrupted production. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application advice. Clamping Screw 1365M — M18x2.5 thread, 125 mm length, Vertex Clamping Screw 1365M for industrial fixture and workholding applications, designed to provide reliable, heat-treated fastening where secure, repeatable clamping is required Heat-treated steel construction M18x2.5 thread for secure fastening 125 mm overall length Robust yet lightweight at 0.2 kg Consistent clamping precision for production workflows The compact fastener is designed to translate torque into reliable axial force via its M18x2.5 thread, providing reproducible clamping results across batches. Manufactured from heat-treated steel, the component resists deformation under load, which reduces the need for frequent retorqueing and supports stable part dimensions during machining. This leads to fewer stoppages for adjustment and a measurable improvement in process repeatability, making the fastener suitable for jigs, clamps and fixture assemblies where consistent contact pressure is essential. Built for durability to minimise maintenance intervals A focus on material integrity and simple, standard geometry means longer service life and fewer replacements. The heat treatment enhances wear resistance and the robust thread profile maintains engagement under cyclic loading, which contributes to reduced toolroom downtime. By using a standard metric thread and proven manufacturing practices, the fastener supports predictable lifecycle planning and easier inventory management, helping to keep the production line running with limited unplanned interventions. Fast integration with existing fixtures and easy handling Standardised dimensions and a clear specification make integration straightforward: the 125 mm length provides ample reach for a range of clamping setups while the modest mass (0.2 kg) keeps handling simple during assembly and reduces fixture weight. The metric M18x2.5 thread aligns with common componentry in industrial environments, simplifying retrofits and enabling the replacement of worn parts without redesign. Clear, verifiable specifications ensure compatibility checks can be completed quickly and decisively. For reliable clamping backed by Vertex quality, contact Metav Werkzeuge in Emmerich for ordering or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930; consultants can advise on fixture compatibility and supply options Technical data Article number: 1365M GTIN: 4061905090455 Manufacturer: Vertex Machinery Works Co., Ltd. Eclass: 21022190 Facts Length: 125 mm Weight: 0.2 kg Thread: M18x2.5P Materials & features Material: Heat-treated steel Product type: Clamping screw SKU: 1365M FAQ What thread specification does this clamping screw use? The clamping screw 1365M features an M18x2.5 thread suitable for standard metric fixtures. What material is used for the fastener? The component is made from heat-treated steel, providing increased wear resistance and dimensional stability. What are the overall length and weight of the fastener? The fastener measures 125 mm in length and weighs approximately 0.2 kg, giving good reach with manageable handling weight. Is the 1365M suitable for use in jig and fixture assemblies? Yes, the 1365M clamping screw is intended for workholding and fixture applications where repeatable clamping is required. Who manufactures the fastener and how is it identified? This clamping screw is manufactured by Vertex and is listed under the article number 1365M (GTIN 4061905090455). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise, protective clamping with the soft jaws’ exact dimensions and reliable fit for VQC vices; the combination of secure holding, easy replacement and clear technical data keeps setup time low and rework minimal. Order the VQC-125MJ directly via Metav Werkzeuge or consult our specialists for application advice. VQC-125MJ Soft Jaws for VQC Vices — Soft clamping, 124.5 x 87 x 60 mm (Vertex) The VQC-125MJ soft jaws are a workshop accessory designed to provide protective clamping for VQC vices, ideal for delicate and finished surfaces where secure yet gentle holding is required. Soft clamping for delicate workpieces Precise dimensions 124.5 x 87 x 60 mm Compatible with VQC series vices Protect delicate workpieces while maintaining productivity Soft clamping surfaces reduce marking and deformation during machining and finishing operations. The soft jaws supply an even contact surface that distributes clamping forces, which helps to lower scrap rates and improve surface quality on sensitive components. For assembly and light machining tasks, this protective contact minimises the need for additional packing or bespoke fixtures, so set-up is faster and parts remain ready for subsequent operations without extra rework. Accurate fit and repeatable positioning for steady workflows Compatibility with VQC vices ensures a secure, repeatable interface between the accessory and the vice body. With external dimensions of 124.5 x 87 x 60 mm, the jaws align precisely to the vice mounting, simplifying changeovers and maintaining concentricity during clamping. The specification is listed under SKU VQC-125MJ for straightforward identification and ordering. A consistent fit contributes to predictable clamping behaviour and supports higher throughput in serial tasks. Operational benefits that support quality and efficiency By using purpose-made soft jaws, the risk to finished components is reduced while bench time remains efficient. The accessory’s design supports rapid replacement and integration into existing clamping routines, which helps to shorten downtimes and sustain production cadence. As a practical workshop solution, these jaws complement existing tooling kits and promote uniform handling of delicate parts, thereby enhancing overall process reliability and part quality. Contact Metav Werkzeuge today for tailored advice on selecting the correct soft jaws for VQC vices and ensure the right configuration for the workshop — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VQC-125MJ GTIN: 4061905087523 Weight: 4.73 kg Dimensions: 124.5 x 87 x 60 mm Facts Weight: 4.73 kg Dimensions (L x W x H): 124.5 x 87 x 60 mm GTIN: 4061905087523 Special features Soft jaws for protective clamping Compatible with VQC series vices Classification: eClass 21029107 Manufacturer: Vertex FAQ What applications are the soft jaws best suited for? The VQC-125MJ soft jaws are intended for holding delicate or finished components in VQC vices where protective clamping is required, for light machining, inspection and assembly tasks. How are the jaws fitted to a VQC vice? Fitting follows the vice’s standard jaw mounting; the accessory aligns to the vice flange and secures in place, providing a repeatable clamping surface for workshop operations. Will the soft jaws prevent surface marring on finished parts? Yes, the soft clamping surface on the VQC-125MJ significantly reduces the risk of marking, supporting higher first-pass yield for finished components. Is the VQC-125MJ compatible across the VQC product range? The accessory is designed for use with VQC series vices; compatibility is ensured by matching the vice mounting and the stated dimensions. How does the use of soft jaws affect setup times? Using dedicated soft jaws reduces the need for custom packing and rework, enabling faster changeovers and more consistent clamping behaviour during production. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise measurement repeatability and secure clamping: the combination of 0.01 mm accuracy, a prism stop for round stock and compatibility with 125–140 mm caliper jaws delivers reliable results for everyday workshop tasks. Order the accessory directly via Metav Werkzeuge or consult the team for integration advice. Universal Jaws with Stop (VWSJ-5) — Caliper jaws with prism stop by Vertex The Universal Jaws with Stop (VWSJ-5) are a precision clamping accessory designed to convert standard calipers into a repeatable measuring and holding solution for round and irregular workpieces in metalworking and engineering shops. Precision to 0.01 mm Prism stop for round stock Compatible with jaws 125–140 mm Robust 1.7 kg assembly Reliable precision for routine measuring tasks These jaws deliver measurable benefits where consistent readings matter. With a stated accuracy of 0.01 mm, the accessory reduces measurement variability and supports tighter process control on inspection benches and assembly stations. The specified accuracy refers to the repeatability achieved when the clamping surfaces are used with a compatible caliper; in practice, this translates to fewer rejects and less rework when comparing serial parts. The solid construction also minimises deflection during clamping, so the caliper jaws maintain alignment under typical workshop handling. Secure handling of round and irregular stock A defining feature is the integrated prism stop, engineered to centre and stabilise cylindrical components during measurement or light machining set-ups. The prism profile prevents lateral movement and allows a consistent datum when repeatedly checking diameters or concentric features. The accessory fits jaws with a width range of 125–140 mm, making it suitable for a wide range of vernier and digital calipers commonly used in production and toolrooms. By converting handheld equipment into a stable measuring fixture, the device shortens set-up time and improves operator confidence in routine checks. Practical design for workshop integration Compact dimensions of 175 x 39 x 49 mm and a net weight of 1.7 kg make the unit robust yet easy to handle and mount. The design follows familiar attachment principles so retrofitting takes minimal time and no specialist tooling. For shops focused on efficiency, the result is straightforward: quicker checks, consistent contact points and a lower risk of human error during repetitive measurement tasks. The accessory is particularly advantageous for small-batch producers and maintenance teams who require dependable measurement aids without investing in dedicated fixtures. For tailored advice on integrating the Vertex accessory into existing workflows, contact Metav Werkzeuge in Emmerich; our consultants provide application guidance and availability details to ensure a smooth fit for workshop requirements Technical data Article number: VWSJ-5 GTIN: 4061905090868 Dimensions: 175 x 39 x 49 mm Weight: 1.7 kg Facts Accuracy: 0.01 mm Compatible jaws width: 125–140 mm Special features Prism stop for round pieces Suitable for fitting to standard caliper jaws Manufacturer: Vertex FAQ What calipers are compatible with these jaws? The Universal Jaws with Stop (VWSJ-5) are designed for use with caliper jaws that have a width between 125 and 140 mm; compatibility depends on the caliper's jaw mounting geometry and may require simple adjustment. How does the prism stop improve measurements? The prism stop centres round components and prevents lateral displacement, allowing repeatable contact points and more consistent diameter and concentricity checks when using the VWSJ-5 accessory. Is the stated accuracy of 0.01 mm guaranteed for all setups? The 0.01 mm figure describes the accessory's contribution to repeatability when used with a suitable caliper and correct technique; overall system accuracy will also depend on the measuring instrument and operator practice. Can the jaws be used for light machining or only for measuring? While primarily intended as a precision measuring aid, the robust construction and secure centring provided by the prism stop allow light holding tasks; heavy machining is not recommended. Which manufacturer produces this accessory? The accessory is supplied by Vertex and distributed under SKU VWSJ-5; Vertex production standards ensure consistent fit and finish for workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining 900 kgf clamping force, an adjustable mounting profile and a compact footprint, the FV-550 delivers stable, repeatable workholding for machining and inspection. Order the FV-550 adjustable jaws directly via Metav Werkzeuge or ask our consultants if needed. FV-550 Adjustable Jaws — 900 kgf clamping force, adjustable mounting (Vertex) The FV-550 adjustable jaws are a precision workholding accessory designed for machine vises and fixtures, offering controlled clamping and simple installation for a range of metalworking tasks. 900 kgf clamping force Adjustable, precision-machined profile Includes M12 bolts 2x75L & 2x125L Robust 23 kg construction Stable clamping for demanding machining The core advantage of these jaws is the 900 kgf clamping force, which provides high contact pressure without relying on excessive fixture mass. That level of force supports secure positioning for milling, drilling and light grinding operations, reducing part movement and improving surface finish. The profile is adjustable, allowing alignment with a variety of vice jaws and bespoke soft jaws; included M12 bolts (2x75L and 2x125L) simplify mounting and reduce set-up time. Overall, the combination of force and modularity enhances process reliability on the shop floor. Compact, heavy construction for vibration damping With a mass of 23 kg and external dimensions of 125 x 120 x 250 mm, the component combines a compact footprint with sufficient weight to dampen vibration during cutting. The substantial construction supports repeatable clamping pressure over extended cycles, contributing to consistent part tolerances. The design prioritises mechanical stability and straightforward integration into existing fixturing systems, making it suitable for batch work as well as prototype and toolroom applications. Practical handling, maintenance and selection Adjustment features are intentionally simple to service: the mounting interface and bolt sizes conform to common workshop standards, enabling quick replacement of fasteners without specialist tooling. Routine inspection of contact surfaces and mounting bolts ensures sustained accuracy. When selecting workholding components, consider the rated clamping force relative to the operation and material being machined; higher clamping figures like 900 kgf permit more aggressive feeds but require secure fixturing overall. The product’s precise machining and stable mass support long-term workshop use with minimal downtime. For dependable, high‑force clamping from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice or to secure the FV‑550 through our distribution channels — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: FV-550 GTIN: 4061905095733 Accessories included: 2x M12x75L and 2x M12x125L Facts Weight: 23 kg Dimensions: 125 x 120 x 250 mm Clamping force: 900 kgf Special features Adjustable design Suitable for machine vises and fixtures Robust construction for stable clamping FAQ What clamping force is provided by these jaws? The FV-550 adjustable jaws deliver a rated clamping force of 900 kgf, providing secure holding for typical milling and drilling operations. Which fasteners are supplied for installation? The set includes two M12x75L and two M12x125L bolts to facilitate mounting to standard vice or fixture interfaces. Are these jaws suitable for heavy‑duty machining? The FV-550, manufactured by Vertex, offers high clamping force and robust construction; suitability depends on the specific cutting parameters and machine setup rather than clamping component alone. What are the external dimensions and weight? Dimensions are 125 x 120 x 250 mm and the assembly weight is 23 kg, providing a compact but stable workholding solution. Can the jaws be adjusted to different workpiece profiles? Yes, the adjustable design permits alignment and adaptation to a range of workpiece geometries and vice configurations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust, compact and precise: the Vertex VMP-5L modular machine vice delivers 0.01 mm repeatability in a space-saving footprint, combining stability and adaptability for high-quality production. Its modular concept supports fast reconfiguration while the solid mass reduces vibration and improves cut consistency. Order the VMP-5L directly via Metav Werkzeuge or ask our consultants if needed. VMP-5L Modular machine vice — Compact 0.01 mm repeatability by Vertex The VMP-5L is a modular machine vice engineered for secure workholding on milling machines and machining centres, offering stable clamping in confined setups. Modular design for flexible clamping High repeatability 0.01 mm Compact 125 x 160 x 80 mm footprint Robust 14.5 kg base for stability Consistent precision that reduces rework The vice provides a measurable advantage where tolerance matters: 0.01 mm accuracy ensures reliable part-to-part repeatability, lowering the need for corrective operations. This level of precision is achieved through a stable build and finely engineered guideways, which together reduce positional deviation during cutting. For production environments focused on repeatability, the vice acts as a predictable fixture, enabling consistent cycle times and minimising scrap rates. The combination of compact form and exacting tolerance supports efficient batch processing without compromising quality. Flexible modular concept for faster setup A modular workholding system shortens fixture preparation and adapts to varied component geometries. The modular concept allows components of the vice to be reconfigured for different clamping schemes, reducing downtime between jobs. The compact footprint of 125 x 160 x 80 mm makes the unit suitable for smaller tables and tight nests, while the vice’s modularity supports staged fixturing for multi-operation setups. This flexibility translates into operational efficiency: fewer dedicated fixtures are required and changeovers become more straightforward, supporting leaner workflows. Stability and integration for demanding machining Weighing 14.5 kg, the vice offers a mass that dampens vibration and improves surface finish during aggressive cutting. The solid base and robust construction contribute to secure clamping under varying feed rates, helping to protect tool life and machine spindle bearings. Designed for integration with standard machining centres and milling machines, the vice supports straightforward mounting and stable operation in continuous production. For technicians and planners, the focus is on dependable clamping and reduced process variation, which together elevate throughput quality. For specification advice and delivery from Metav Werkzeuge—trusted partner for precision tools—contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VMP-5L GTIN: 4061905092404 Manufacturer: Vertex Machinery Works Co., Ltd. Type: Modular Eclass: 21020601 ETIM: EC002173 Core specifications Dimensions: 125 x 160 x 80 mm Accuracy: 0.01 mm Weight: 14.5 kg Materials & features Modular design Suitable for machine tool workholding SKU: VMP-5L Gallery images available FAQ What level of repeatability can be expected from this vice? The VMP-5L achieves repeatability to 0.01 mm, providing the precision required for tight-tolerance machining and consistent part interchangeability. Is the vice suitable for small-machine tables and tight setups? Yes. With compact dimensions of 125 x 160 x 80 mm, the unit is designed for confined machine tables and adaptable fixturing layouts. Can the modular concept reduce the number of dedicated fixtures? The modular design allows reconfiguration for varied clamping tasks, helping to reduce the need for multiple dedicated fixtures and shortening setup times. How does the weight affect machining performance? At 14.5 kg, the vice provides mass that dampens vibration and improves surface finish, contributing to steadier cutting conditions and longer tool life. Which machines is the vice intended to be used with? The vice is intended for mounting on milling machines and machining centres as a reliable workholding solution for diverse production tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of modular workholding, 0.01 mm repeatability and a compact footprint to stabilise production quality and reduce setup time. Order this vice directly via Metav Werkzeuge or consult our specialists for tailored configuration advice. VMP-55D Modular machine vice — 0.01 mm repeatability, compact design (Vertex) The VMP-55D is a modular machine vice engineered for precision clamping in milling and machining centres, offering adaptable workholding for a wide range of production tasks. Modular design for flexible workholding Precision clamping with 0.01 mm accuracy Solid construction, mass 14.5 kg Compact footprint 125 x 160 x 80 mm Consistent precision that reduces rework and scrap High-accuracy clamping effects process reliability and repeatability. With a measured accuracy of 0.01 mm, the vice secures components with minimal positional deviation, which lowers the need for rework and increases first-pass yield. For operations where tight tolerances determine part acceptance, this level of repeatability supports stable cycle times and predictable quality. The emphasis on precision is particularly beneficial when machining complex geometries or when subsequent measuring operations must align to exactly the same datum. Flexible modular workholding shortens setup time A modular approach to clamping enables rapid reconfiguration of the workholding layout without compromising rigidity. The vice’s modular workholding concept allows interchangeable jaws and add-on fixtures to be fitted for different part geometries, reducing fixture inventories and floor space. The compact footprint of 125 x 160 x 80 mm makes it suitable for crowded machine tables and multi-spindle setups, while maintaining clear access for tooling. For shops that run varied batches, the ability to adapt clamping quickly translates into fewer changeover minutes and improved throughput. Robust mass and stability for vibration damping A higher mass base contributes to machining stability by damping cutting forces and vibration. At 14.5 kg, the vice provides a stable platform that helps maintain tool life and improves surface finish consistency. The sturdy construction also supports heavy-duty cuts where resistance to lateral movement matters. Integration into existing machining centres is straightforward; the vice is intended for standard machine tables and can be combined with common fixturing components to create a reliable clamping solution that keeps downtime to a minimum. Discuss configuration options for Vertex modular clamping with Metav Werkzeuge — receive precise product matching and delivery from our Emmerich warehouse Technical Data SKU: VMP-55D GTIN: 4061905090363 Designation: Maschinenschraubstock (machine vice) Facts Dimensions: 125 x 160 x 80 mm Weight: 14.5 kg Accuracy: 0.01 mm eClass: 21020601 ETIM: EC002173 Special features Type: Modular Brand: Vertex Gallery images available FAQ What level of repeatability can be expected from this modular vice? The VMP-55D modular machine vice delivers a repeatability of 0.01 mm, supporting consistently tight tolerances across repeated setups. Can the vice be adapted for different part geometries? Yes, the modular workholding concept allows interchangeable jaws and fixtures so the vice can be reconfigured for varied shapes and batch types. Is the VMP-55D suitable for use on small machining centres? The compact footprint of 125 x 160 x 80 mm and solid mass make the vice suitable for small to medium machining centres and multi-station machines. How does the vice’s weight affect machining performance? At 14.5 kg, the vice provides effective damping of cutting forces, which helps to improve surface finish and extend tool life during demanding cuts. Who manufactures this machine vice? The vice is produced by Vertex and supplied under the SKU VMP-55D; Vertex is known for engineering robust clamping solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable clamping and surface protection are combined in the axial-drive VNC-5PJ, delivering a compact 125×45×15 mm profile and a lightweight 1.5 kg configuration for reduced spindle load; order the VNC-5PJ directly via Metav Werkzeuge or ask the consultants for fitment and application advice. VNC-5PJ — Vertex smooth clamping jaws with axial drive for VNC-FV chucks The VNC-5PJ is a set of smooth clamping jaws with an axial drive, designed for secure, non-marring clamping in precision machining on VNC-FV chucks. Axial drive for precise jaw movement Smooth jaws for non-marring clamping Supplied in pairs Compact 125×45×15 mm form factor Consistent protection for finished surfaces The axial drive and smooth jaws combine to provide a reliable clamping method that reduces marking on delicate workpieces. The axial actuation aligns the contact surface consistently, supporting non-marring clamping and uniform pressure distribution. With a compact 125×45×15 mm footprint and a measured mass of 1.5 kg, the component contributes minimal additional inertia, which is advantageous in jobs where surface finish and repeatability are priorities. This design choice supports shorter set-up times and fewer rework cycles in production. Practical benefits that keep production moving Supplied in pairs, the jaws are intended for straight replacement and balanced clamping, helping to maintain concentricity during turning and light finishing operations. The pairing reduces inventory handling and simplifies maintenance planning for workshop managers. Made for compatibility with VNC-FV chucks, the unit assists in achieving predictable clamping behaviour and reduced cycle variability. The robust geometry of the jaw faces enables handling of machined components without the need for additional protective measures in many applications. Where these jaws make the difference These smooth, axially driven jaws are particularly suitable where component aesthetics and precision are essential, such as in finishing, inspection-ready runs, or small-batch production. The unit supports shops that require a gentle but firm hold for aluminium, brass and other sensitive materials where conventional serrated jaws would leave marks. As a Vertex-produced clamping solution, the item is designed for repeatable performance and straightforward integration into existing VNC-FV set-ups, helping to standardise clamping across fixtures and operators. Contact Metav Werkzeuge to confirm compatibility and arrange procurement of Vertex VNC-5PJ smooth jaws for VNC-FV chucks; Metav’s consultants are available to advise on fitment and application from their Emmerich quality hub Technical Data Article number: VNC-5PJ GTIN: 4061905091384 Manufacturer: Vertex Facts Dimensions: 125×45×15 mm Weight: 1.5 kg eClass: 21130302 Special features Axial drive and smooth jaws For VNC-FV Supplied in pairs Brand: Vertex FAQ What chucks are these jaws compatible with? The VNC-5PJ smooth jaws are designed specifically for use with VNC-FV chucks and are intended to match the axial drive interface of that series. Are the jaws supplied individually or as a set? These clamping jaws are supplied in pairs, allowing immediate installation as a matched set to preserve balance. Will the smooth jaws prevent marks on soft materials? The smooth jaws of the VNC-5PJ reduce the risk of marking and are suitable for handling softer or finished components where surface appearance matters. What are the physical dimensions and weight of the jaws? The unit measures 125×45×15 mm and has a weight of 1.5 kg, values that support low added inertia in machining setups. Who manufactures the VNC-5PJ? The VNC-5PJ is a Vertex product, manufactured to match the specifications and interface of VNC-FV chucks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, stable stop that delivers repeatable positioning and fast fixture changeover. Combining precise right‑angle locating with compatibility for VQC vises supports reliable setup and increased throughput. Order the L stop directly via Metav Werkzeuge or ask our consultants if needed. L stop for VQC vises (125×54×37 mm, 1.06 kg) — Vertex VQC-125FPF The L stop is a right‑angle locating accessory for VQC vises, engineered to secure workpieces for machining and inspection tasks with consistent, repeatable reference faces Precise right‑angle stop for VQC vises Compact dimensions 125×54×37 mm Stable mass for vibration damping 1.06 kg Straightforward fixture integration, SKU VQC-125FPF Faster setups through repeatable positioning The accessory provides a defined right‑angle reference that reduces alignment time and minimises rework. As an L stop compatible with VQC vises, it establishes a repeatable datum for serial machining and measuring operations, so setups become predictable and less dependent on manual adjustment. This translates into measurable time savings per job and steadier output quality. Compact, stable design for small workstations With external dimensions of 125×54×37 mm and a mass of 1.06 kg, the stop combines a small footprint with sufficient inertia to improve clamp stability during machining. The compact format makes it suitable for crowded benches and multi‑station jigs, while the mass helps to dampen micro‑vibrations that can affect finish and tolerances. The result is improved process reliability without sacrificing workspace efficiency. Seamless integration with VQC clamping systems Designed for direct use in VQC‑series vises, the component is identified as SKU VQC-125FPF and listed under GTIN 4061905090387, ensuring traceable procurement and easy replacement. The accessory supports a consistent workflow when paired with standard VQC fixtures and helps to standardise fixturing across batches. Compatibility with common clamping routines reduces setup variability and supports higher throughput in production environments. Contact Metav Werkzeuge in Emmerich to confirm fit and availability of the Vertex L stop VQC-125FPF — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise advice and ordering from our warehouse in Emmerich Technical data Article number: VQC-125FPF GTIN: 4061905090387 Manufacturer: Vertex Dimensions & weight Dimensions: 125×54×37 mm Weight: 1.06 kg eclass: 21029210 Compatibility & features For VQC vises SKU: VQC-125FPF Brand: Vertex FAQ What is the main function of this stop? The L stop provides a fixed right‑angle locating face for VQC vises, enabling repeatable positioning for machining and inspection tasks. Is the component compatible with all VQC vises? The accessory is designed for use with VQC vises and is listed as SKU VQC-125FPF; compatibility with specific machine setups should be verified against the vise model. What are the exact dimensions and mass? The stop measures 125×54×37 mm and has a mass of 1.06 kg, offering a compact footprint with stable behaviour during clamping. How does the stop improve machining results? By providing a consistent datum and added stability, the stop reduces setup variability and helps to dampen micro‑vibrations, which supports improved surface finish and dimensional consistency. Can the part be identified for procurement or replenishment? Yes — the component is supplied under SKU VQC-125FPF and GTIN 4061905090387 for straightforward ordering and inventory control. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise measurement, gentle workpiece handling and straightforward integration for smoother inspection and reproducible results; order the Universal Jaws with Stop VWSJ‑R130 directly via Metav Werkzeuge or consult our advisors for compatibility and delivery. Universal Jaws with Stop VWSJ‑R130 – Soft stop, suitable for 125–140 mm caliper jaws (Vertex) The Universal Jaws with Stop are clamping inserts for precision calipers, engineered to measure irregular or delicate workpieces reliably in workshop and quality‑control environments. Soft stop for irregular workpieces Compatible with calipers 125–140 mm Accuracy 0.01 mm Precise measurement that speeds inspection The VWSJ‑R130 delivers 0.01 mm repeatability, enabling consistent readings across series inspections and incoming checks. The fine tolerance reduces measurement variation, which in turn lowers the risk of rework and saves time on downstream processes. For users who compare parts across batches, the measurable gain is evident: fewer rejects and a more predictable production flow. The focus on precision supports both manual measuring routines and calibrated verification steps. Gentle clamping for uneven and fragile parts A defining advantage is the soft stop designed specifically for ununiform workpieces. By cushioning contact, the stop protects surface finishes and thin edges during measurement while still ensuring stable seating. This feature benefits applications such as small machined components, castings with uneven edges or delicate assemblies where standard hard jaws would mark or deform the part. The result is reliable contact without compromising component integrity. Compact form and simple integration With compact dimensions of 175 x 39 x 49 mm, these clamping inserts fit into narrow setups without adding bulk. The design adapts to standard caliper interfaces and is compatible with jaws in the 125–140 mm width range, making retrofitting straightforward for many inspection benches. Easy handling reduces changeover time between measuring tasks and supports rapid measurement cycles on the shop floor. Built for workshop reliability and traceable results Durability and repeatability are prioritised to suit routine industrial use. The clamping inserts maintain stable contact force and measurement geometry over repeated operations, which supports traceable quality checks and consistent documentation. By combining dependable mechanical behaviour with clear specification data, these inserts contribute to fewer measurement deviations and more robust quality records. Discuss the Vertex Universal Jaws with Stop VWSJ‑R130 with Metav Werkzeuge to confirm fitment for existing precision calipers and to arrange supply from our Emmerich stock Technical data SKU: VWSJ-R130 GTIN: 4061905089565 Designation: Universal jaws with stop Core specifications Dimensions: 175 x 39 x 49 mm Accuracy: 0.01 mm Compatible jaw width: 125–140 mm Features and notes Soft stop for irregular workpieces ECLASS: 21029107 Brand: Vertex FAQ What measurement accuracy can be expected with these jaws? The Universal Jaws with Stop VWSJ‑R130 provide an accuracy of 0.01 mm, supporting repeatable readings for workshop and inspection tasks. Are these jaws compatible with standard precision calipers? Yes, the inserts are designed for caliper jaws with a width of 125–140 mm and integrate with common precision caliper interfaces. How does the soft stop affect fragile components? The soft stop on the VWSJ‑R130 cushions contact to prevent marking or deformation, making it suitable for delicate or irregularly shaped workpieces. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a rigid, workshop-ready fixture that combines high-strength cast steel construction with a documented accuracy of 0.01 to secure repeatable right-angle set-ups and reduce rework. Order the VRH-5 Angle Plate directly via Metav Werkzeuge or ask our consultants if needed. VRH-5 Angle Plate — Vertex | High-strength cast steel, 0.01 accuracy The VRH-5 Angle Plate is a precision right-angle fixture designed for reliable fixturing and inspection duties in workshop and metrology environments. High-strength cast steel construction 0.01 accuracy for precise alignment Compact dimensions: 126 x 202 x 300 mm Robust 16.9 kg mass for stability Reliable accuracy for production and inspection The angle plate provides a documented accuracy of 0.01, ensuring consistent right-angle references for gauging and machining tasks. This level of tolerance reduces measurement variation and limits the need for iterative adjustments, which improves throughput on repetitive jobs. By establishing a firm datum with minimal deviation, the fixture supports shorter setup cycles and more predictable inspection outcomes, making it a practical choice where reproducibility is critical. Built for rigidity and vibration damping Constructed from high-strength cast steel, the component mass of 16.9 kg delivers substantial stability for clamping operations. The combination of dense material and robust geometry minimises vibration and deflection during contact probing, manual machining or light-duty milling. The compact footprint of 126 x 202 x 300 mm keeps the fixture suitable for benchtop use while its weight contributes to steady support, which helps protect measuring instruments and prolongs tool life. Practical application benefits and easy integration Designed as a right-angle fixturing solution, the plate is suitable for inspection benches, assembly jigs and machining set-ups that require a reliable datum. The solid construction simplifies part orientation and reduces the time spent on temporary supports or improvised fixtures. Where precise part positioning is required—such as comparative gauging or alignment prior to finishing—this angle plate offers a stable base that integrates smoothly into existing workflows and measurement stations. For workshop-ready precision from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical data Article number: VRH-5 GTIN: 4061905094583 Eclass: 21170130 Facts Dimensions: 126 x 202 x 300 mm Weight: 16.9 kg Accuracy: 0.01 Materials and special features Material: high-strength cast steel Designed for right-angle fixturing Product images available FAQ What accuracy does the plate provide? The VRH-5 Angle Plate by Vertex offers an accuracy of 0.01, suitable for repeatable right-angle referencing in inspection and machining tasks. Which material is used in the construction? The device is manufactured from high-strength cast steel, providing rigidity and improved vibration damping. Is the angle plate suitable for inspection benches and machining centres? Yes — the VRH-5 Angle Plate is intended for use on inspection benches, assembly jigs and machining centres where a stable right-angle datum is required. What are the dimensions and weight of the component? The plate measures 126 x 202 x 300 mm and weighs 16.9 kg. Which tasks benefit most from this fixture? Metrology, part alignment, comparative gauging and pre-machining set-ups benefit from the stable datum and repeatable accuracy offered by the VRH-5 Angle Plate. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, workshop-ready collet set that combines precision ER‑40 clamping, a practical hexagonal storage case and consistent 30 mm clamping length for repeatable toolholding. The construction and weight distribution support stable handling and quick tool changes, so production remains efficient and reliable — order directly via Metav Werkzeuge or contact their consultants for specification advice. VFV-40H Collet Set (Hexagonal) by Vertex — ER‑40 standard, 30 mm clamping The VFV-40H is a hexagonal collet set designed for secure ER‑40 tool retention in milling and general machining applications Hexagonal storage case for compact organisation Includes ER‑40 collets for standard tooling 30 mm clamping length for consistent grip Robust set weight 4.8 kg for stable handling Precision clamping that reduces setup time The set provides repeatable ER‑40 clamping that shortens setup and changeover times in medium‑duty machining. The 30 mm clamping length ensures a consistent engagement depth across tools, which reduces the need for re‑alignment and minimises runout variation. For workshops that run mixed batches, the reliable grip offered by this collet collection supports steady cycle times and fewer scrapped parts. Technical users will appreciate how standardised ER‑40 interfaces simplify tool inventory and spares management. Neat storage and workshop efficiency A hexagonal storage design keeps all components organised and accessible, supporting a tidy bench and faster tool selection. The compact case protects each collet and reduces handling damage during transport between machines. Being offered as a comprehensive set avoids repeated purchases of individual collets and helps centralise tooling logistics. The set’s balanced weight contributes to stable placement during use, which is particularly useful on busy shop floors and mobile tool trolleys. Built for durability and everyday use Components are matched for regular workshop routines: the set is robust and designed to withstand frequent clamp/ unclamp cycles without performance loss. The overall construction supports safe retention under typical spindle speeds for ER‑40 tooling; maintenance is straightforward and cleaning between tool changes preserves clamping accuracy. The combination of proven design and sturdy assembly promotes long service life, reducing total cost of ownership in the mid‑term. Choosing the right set for specific machines This collet collection suits machining centres and manual milling machines that accept ER‑40 tooling and require a mid‑range clamping depth. When evaluating compatibility, check spindle tapers and tool‑holder interfaces rather than just collet sizes; the 30 mm engagement is a practical compromise for general‑purpose tooling. For specialised high‑speed or ultra‑precision applications, consider matching the collet characteristics with spindle specifications to maintain concentricity and tool life. For tailored advice or to secure reliable ER‑40 clamping with the Vertex VFV-40H, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VFV-40H GTIN: 4061905083686 Content: 7 x ER‑40 Clamping length: 30 mm Weight: 4.8 kg Facts Height: 127 mm Clamping length (aufnahme): 30 mm Set: yes eClass: 21022190 Special features Hexagonal case ER‑40 standard collets Brand: Vertex Suitable for general machining toolholding FAQ What collet standard is included in the set? The set contains ER‑40 collets compatible with standard ER‑40 toolholders and retains the ER‑40 interface across the included pieces. What is the clamping length and why does it matter? The 30 mm clamping length gives consistent engagement for tools, improving repeatability and reducing the need for frequent re‑setting. Is the set suitable for high‑speed machining? The Vertex collet set is designed for standard machining speeds with ER‑40 tooling; match spindle specifications to the collets for high‑speed applications to ensure concentricity. How does the hexagonal case benefit the workshop? The hexagonal storage keeps collets organised, reduces handling damage and speeds up tool changes, supporting efficient bench workflow. What is the total weight of the set and how does that affect handling? The complete set weighs 4.8 kg, providing stable placement during use and robust handling for frequent transport within the workshop. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine high clamping force, adjustable functionality and a robust 21 kg construction for reliable, vibration‑resistant workholding; a compact 127 x 218 x 84 mm footprint supports precise machining in confined set-ups. Order the clamping jaws directly via Metav Werkzeuge or ask our consultants for tailored advice. SV-125 Adjustable Clamping Jaws — 1,800 kgf clamping force, 21 kg mass A SV-125 adjustable clamping jaw set designed to secure a wide range of workpieces in industrial workholding and fixture applications Adjustable clamping jaws for versatile setups Clamping force 1800 kgf for secure hold Robust 21 kg construction for stability Includes 4x M16x75L fastening bolts Maximum holding power with a compact footprint The jaw set delivers a clamping force of 1800 kgf, providing a clear measure of holding strength for demanding operations. The relatively heavy construction — 21 kg — contributes to vibration damping and positional stability during cutting or grinding, which in turn supports repeatable tolerances. With a compact footprint of 127 x 218 x 84 mm, the component integrates into tight fixturing arrangements without compromising rigidity, enabling longer tool life and fewer reworks. Flexible adjustment to reduce setup times Designed as an adjustable workholding accessory, the jaws accommodate varying part geometries and enable quick changeovers between batches. The set includes 4x M16x75L fastening bolts for direct mounting, reducing procurement steps and simplifying installation in standard clamping systems. Fewer mechanical adjustments translate into shorter downtime between operations, increasing throughput on production floors while maintaining secure contact between jaw and workpiece. Industrial reliability and straightforward integration Manufactured under the Vertex name, the SV-125 is intended for integration into conventional clamping and fixture systems within workshops and industrial environments. The product’s design focuses on secure hold and straightforward mounting, supporting consistent machining results. Supplied via a European distribution channel that acts as a quality filter, the device benefits from reliable logistics and documentation that support professional procurement and traceability. For heavy‑duty, precision workholding consider the Vertex SV-125 — contact Metav Werkzeuge for specification support and delivery from our Emmerich quality hub Technical data SKU: SV-125 GTIN: 4061905087882 Manufacturer: Vertex Core specifications Dimensions: 127 x 218 x 84 mm Weight: 21 kg Clamping force: 1800 kgf Special features Adjustable clamping jaws Includes 4x M16x75L Article class: 21029107 FAQ What clamping force does this jaw set provide? The jaw set provides a clamping force of 1800 kgf, which is specified for the Vertex SV-125 adjustable clamping jaws to ensure secure holding during machining. What are the overall dimensions and weight? Dimensions are 127 x 218 x 84 mm and the weight is 21 kg, giving the SV-125 a compact footprint with a stabilising mass for reduced vibration. Are fastening bolts included? Yes, the delivery of the SV-125 includes 4x M16x75L fastening bolts for mounting. For which applications is the jaw set intended? The product is designed for industrial workholding and fixture use, offering adjustable clamping for varied workpieces in machining and assembly processes. Who manufactures the product and how is it supplied? The jaws are manufactured by Vertex; supply is supported through European distribution channels to ensure traceability and consistent quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact replacement that combines reliable voltage options and an included lamp to keep workshop lighting running with minimal downtime. The combination of 12V/50W and 24V/50W compatibility, paired with a genuine Vertex bulb, ensures straightforward replacement for VHL halogen fixtures. Order directly via Metav Werkzeuge or ask the consultants for advice on matching the unit to existing installations. Vertex V-B16 Transformer and Bulb for VHL Halogen Lamp — 12V/50W or 24V/50W The V-B16 Transformer and Bulb is a compact replacement power unit designed for VHL halogen lamps, suitable for workshop and industrial task lighting requiring stable low-voltage operation. Dual voltage compatibility 12V/24V Compact, lightweight design Genuine Vertex replacement part Continuous, dimmable-feeling light where it matters The integrated transformer offers stable low-voltage supply in either 12V/50W or 24V/50W modes, ensuring consistent lamp output and preventing flicker that disrupts precision work. By converting mains voltage to the level required by halogen lamps, the unit supports steady heat and light characteristics that are familiar to metalworking and inspection tasks. Reliable illumination reduces rework and supports accurate visual checks, contributing to efficient production cycles. Small footprint, simple replacement and minimal downtime With a compact, lightweight form, this replacement unit is intended for fast swap-outs without complex rewiring. The included bulb eliminates the need to source a matching lamp separately and shortens maintenance intervals. The low mass of 0.009 kg minimises strain on lamp holders and keeps the fixture balanced. For workshops aiming to reduce equipment downtime, a ready-to-fit transformer and lamp pairing delivers practical time savings and predictable results. Compatibility-focused design for workshop environments Designed as a direct replacement for VHL halogen fixtures, the unit fits common mounting and connection setups used in industrial lighting. As a Vertex-branded component, it aligns with expectations for consistent manufacturing and serviceability. The use of a dedicated transformer is essential for halogen technology: it adapts line voltage safely and preserves the lamp’s luminous properties. For technical queries or assistance selecting the correct voltage option, Metav Werkzeuge offers guidance by email, phone or WhatsApp. Contact Metav Werkzeuge for genuine Vertex replacement units and expert advice on voltage selection or compatibility for VHL halogen installations Technical data Article number: V-B16 GTIN: 4061905092091 eClass: 27039101 Facts Weight: 0.009 kg Voltage / Power: 12 V / 50 W; 24 V / 50 W Special features Compatible with VHL halogen lamps Includes transformer and lamp bulb Brand: Vertex FAQ Is this unit compatible with my VHL halogen lamp? The V-B16 Transformer and Bulb is designed for use with VHL halogen fittings; confirm fixture connections and required voltage before installation. Which voltage should be chosen for a specific installation? Select 12V/50W or 24V/50W according to the lampholder and wiring of the fixture; the V-B16 supports both options for flexibility. Does the delivery include the bulb and transformer together? Yes, the V-B16 package contains both the transformer and the matched halogen bulb for immediate replacement. Can this component be used in industrial workshop lighting? The V-B16 is intended for workshop and industrial task lighting where VHL halogen fixtures are in use and a low-voltage supply is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan