Ausstattungen für Fräsmaschinen

Take advantage of the combination of robust 2,500 kgf clamping, a wide 0–200 mm opening and reliable hydraulic actuation for steady production processes; order the vice directly via Metav Werkzeuge or consult our specialists for application advice. VMCH-4 Hydraulic machine vice (Vertex) — 2,500 kgf clamping, 0–200 mm opening The VMCH-4 hydraulic machine vice is a high-capacity clamping solution designed for heavy-duty machining and precision workshops, offering a hydraulic drive and an extra-large opening for versatile workholding. Hydraulic drive with high clamping force Extra-large 0–200 mm opening Cast iron construction for stability High precision: 0.01 mm Weight approx. 26 kg for easy handling Secure heavy and awkward workpieces with consistent force The vice delivers a 2,500 kgf clamping capability via a robust hydraulic system, ensuring consistent seating of components during milling, drilling and other machining tasks. The extra-large 0–200 mm opening permits secure gripping of larger or asymmetrical parts without the need for frequent re-fixturing, which reduces setup time and improves throughput. Hydraulic actuation smooths pressure application, minimising chatter and helping maintain surface quality under load, a decisive advantage for repetitive production runs. Precision and rigidity that support tight tolerances Built from cast iron, the vice provides a stable contact surface and resistance to distortion during clamping cycles, supporting repeatable positioning with an accuracy of 0.01 mm. This level of precision translates to predictable results when finishing or reaming operations are required; the nominal accuracy figure indicates the consistency of jaw alignment and the vice's suitability for jobs where small deviations matter. At approximately 26 kg, the unit balances mass for stability with manageable handling for installation or reorientation on machine tables. Practical workshop integration and dependable provenance The vice is a hydraulic model intended for integration on machine tables where reliable clamping force and a wide opening are priorities. The model VMCH-4 from Vertex fits applications ranging from toolroom work to serial production where secure, repeatable clamping reduces scrap and rework. Its constructive simplicity supports routine maintenance and inspection, and the robust design reduces the frequency of resets or shimming. The overall package promotes steady productivity and lower process variance in the workshop environment. Contact Metav Werkzeuge to discuss specific application requirements and reserve the Vertex VMCH-4 hydraulic vice with 2,500 kgf clamping force from our Emmerich stock Technical data Article number: VMCH-4 GTIN: 4061905083891 Manufacturer: Vertex Type: Hydraulic ECLASS: 21020601 ETIM: EC002173 Key figures Dimensions: 121 x 435 x 118 mm Opening: 0–200 mm Clamping force: 2,500 kgf Accuracy: 0.01 mm Weight: 26 kg Material & features Material: Cast iron Extra-large opening Hydraulic operation Accuracy class: 0.01 mm FAQ What clamping force can be expected from this vice? The vice provides a clamping force of 2,500 kgf, giving the VMCH-4 sufficient holding power for heavy machining and demanding setups. What is the usable jaw opening range? The jaw opening spans 0–200 mm, which accommodates larger workpieces without additional fixtures. Is the VMCH-4 suitable for precision machining? Yes. With a specified accuracy of 0.01 mm and a cast iron body for stability, the vice is suitable for tasks requiring repeatable positioning and tight tolerances. How heavy is the vice and how easy is it to mount? The vice weighs approximately 26 kg, which provides rigidity on the machine table while remaining manageable for mounting and repositioning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of 0.01 mm repeatability, 450 kgf clamping force and a generous 0–203 mm jaw opening to improve machining reliability and reduce rework. Order the VMC-4L directly via Metav Werkzeuge or ask our consultants if needed. VMC-4L Machine vice by Vertex — 450 kgf clamping force, 0–203 mm opening A VMC-4L mechanical machine vice designed for secure, repeatable clamping in milling and general machining applications High 450 kgf clamping force Wide 0–203 mm jaw opening Precision to 0.01 mm Stable 17.3 kg mass for secure clamping Consistent precision for repeatable results The vice delivers 0.01 mm positioning accuracy, ensuring repeated setups hold within narrow tolerances. Such precision reduces the need for downstream adjustments and minimises scrap rates in batch production. For users unfamiliar with the figure: 0.01 mm corresponds to one hundredth of a millimetre, a level of repeatability that supports fine finishing and tight-tolerance features on machined parts. The mechanical design is optimised to maintain this accuracy under typical milling loads, supporting steady throughput and process reliability. Strong clamping and flexible workpiece handling With a rated clamping force of 450 kgf and an adjustable jaw opening from 0–203 mm, the vice accommodates a broad range of workpiece sizes while maintaining secure hold during high-torque operations. The specified clamping force refers to kilogram-force (kgf), a unit indicating the downward holding capability; this capacity helps prevent slippage during aggressive feeds or deep cuts. The wide opening range supports both small fixtures and larger blocks, offering a versatile workholding solution that shortens changeover times and increases machine utilisation. Robust build to support workshop productivity The vice’s 17.3 kg mass contributes to inherent stability on the machine table, damping chatter and improving surface finish during demanding cuts. As a mechanical machine vice, it operates without hydraulic systems, simplifying maintenance and integration into standard tooling regimes. The compact footprint (see technical data) permits close fixturing and multi-part setups on typical vertical machining centres. This combination of mass, mechanical simplicity and repeatable clamping promotes uninterrupted production and predictable part quality. Contact Metav Werkzeuge for an application assessment and specify the VMC-4L by Vertex to ensure rapid integration into existing machining processes Technical data SKU: VMC-4L GTIN: 4061905083860 Type: Mechanical Facts Accuracy: 0.01 mm Clamping force: 450 kgf Jaw opening: 0–203 mm Weight: 17.3 kg Dimensions: 108 x 470 x 98 mm ECLASS: 21020601 ETIM: EC002173 Special features Mechanical operation for low maintenance Compact footprint for versatile fixturing Designed for milling and general machining applications FAQ What level of accuracy can be expected from this vice? The VMC-4L machine vice by Vertex provides 0.01 mm repeatability, suitable for fine finishing and tight-tolerance machining. What is the maximum clamping force and why does it matter? The vice offers 450 kgf clamping force; higher holding force reduces workpiece movement under load and improves surface consistency. Which workpiece sizes fit in the vice? Jaw opening from 0–203 mm allows the vice to accept a wide range of component sizes for milling and machining tasks. Is the vice hydraulic or mechanical? This is a mechanical vice; the VMC-4L uses mechanical clamping to simplify maintenance and integration. What is the product identifier for ordering or stock checks? Refer to SKU VMC-4L and GTIN 4061905083860 when specifying the Vertex machine vice Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable clamping power paired with fine positional control ensures uninterrupted machining and reduced rework; benefit from a robust cast-iron body, 25 kN clamping force and precise 0.01 mm repeatability. Order the hydraulic machine vice directly via Metav Werkzeuge or consult our specialists for specification matching. Vertex VNC-100H Hydraulic machine vice — 25 kN clamping force, 0.01 mm accuracy Vertex VNC-100H is a hydraulic machine vice engineered for secure, repeatable clamping in precision metalworking and machine-tool applications. 25 kN clamping force for heavy-duty work Precise 0.01 mm repeatability Cast-iron body for vibration damping 0–205 mm adjustable jaw opening Stable clamping that improves machining yield The vice delivers a consistent 25 kN clamping force that keeps workpieces stable under cutting loads, reducing vibration and tool chatter. With a rated positional accuracy of 0.01 mm, the device supports close-tolerance milling and drilling operations where minimal repositioning is required. The combination of steady clamping and fine repeatability translates into fewer rejects and lower rework costs, making this solution suitable for production runs that demand both throughput and precision. Robust construction for long-term workshop use Built around a cast-iron housing and weighing 23 kg, the unit provides inherent damping and a solid foundation on the machine table. The mass and material choice reduce transmitted vibrations, which benefits surface finish and prolongs tool life. The vice's durable construction also minimises the need for frequent alignment corrections, supporting a reliable day-to-day workflow in busy machining environments. Flexible workholding that speeds setup A jaw opening range of 0–205 mm gives the vice broad versatility for clamping a wide span of component sizes without additional adapters. The hydraulic actuation provides uniform, controllable force distribution across the jaws, simplifying clamping cycles and saving setup time compared with manual screw vices. For operators, this means quicker fixture changes and more time available for value-adding machining operations. Practical installation and straightforward upkeep Compact external dimensions of 100x464x107 mm keep the vice compatible with common machine tables while still providing a substantial clamping range. Routine checks of hydraulic connections and seals, combined with standard lubrication of sliding faces, maintain performance and prolong service life. The device is designed for integration into standard machining workflows; periodic inspection and basic hydraulic maintenance are generally sufficient to preserve accuracy and clamping integrity. Arrange a specification review with Metav Werkzeuge to match the Vertex hydraulic vice to production requirements — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical Data Article number: VNC-100H GTIN: 4061905083297 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Dimensions: 100x464x107 mm Weight: 23 kg Accuracy: 0.01 mm Clamping force: 25 kN Jaw opening: 0–205 mm Special features Material: Cast iron Type: Hydraulic eClass: 21020601 ETIM: EC002173 FAQ What clamping force does the vice provide? The Vertex VNC-100H hydraulic machine vice provides a clamping force of 25 kN, suitable for secure holding during heavy machining tasks. What is the achievable positional accuracy? The vice has a rated positional accuracy of 0.01 mm, enabling precise repeatable setups for close-tolerance operations. What jaw opening is available for different workpieces? Jaw opening ranges from 0 to 205 mm, offering flexibility for a variety of component sizes without additional adapters. What material is the vice body made from and how heavy is it? The housing is made from cast iron and the unit weighs 23 kg, combining rigidity with effective vibration damping. Is this vice suitable for standard machine-table installation? Yes; the vice’s compact footprint and hydraulic actuation are designed for integration on conventional machine tables and for efficient setup workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from high clamping accuracy (0.01 mm), steady hydraulic pressure and a versatile 0–220 mm jaw opening for reliable milling results; order the VHO‑5 directly via Metav Werkzeuge or contact our consultants for specification advice. VHO-5 Hydraulic milling vice (0–220 mm opening) by Vertex The VHO-5 hydraulic milling vice is a durable, high-precision clamping solution designed for use on milling machines and machining centres. High clamping accuracy 0.01 mm Hydraulic actuation for steady clamping Adjustable opening 0–220 mm Robust 36.5 kg construction Consistent precision for repeatable production The vice delivers measurable improvements in process stability thanks to its 0.01 mm clamping accuracy and even hydraulic pressure distribution. The hydraulic actuation reduces jaw slip and micro-movement during cutting, which lowers scrap rates and minimises rework. For production engineers, this translates into higher first-pass yield and reduced inspection effort, while operators benefit from predictable set-ups and less manual re-tensioning after each cycle. Stable mounting and wide part compatibility With a mass of 36.5 kg and a compact footprint of 920 x 190 x 129 mm, the unit provides a steady base for heavier milling passes and coarse cutting. The adjustable jaw opening of 0–220 mm allows clamping of a broad range of workpieces without frequent fixture changes, helping to shorten changeover times. The vice’s construction is engineered to reduce vibration and jaw flex, supporting better surface finish and dimensional stability during demanding operations. Easy specification and line integration The vice is straightforward to include in procurement and production documents, with clear technical identifiers and a compact set of core specifications. The VHO‑5 by Vertex is suitable for integration into machining centres where reliable clamping repeatability and reduced cycle variation are priorities. When combined with routine inspection and scheduled maintenance, the unit supports predictable throughput and contributes to lower lifetime operating costs. Contact Metav Werkzeuge today for tailored advice on Vertex hydraulic clamping solutions and to discuss whether the VHO‑5 meets the specific requirements of the workshop or production line. Technical data Article number: VHO-5 GTIN: 4061905084980 Brand: Vertex Core specifications Dimensions: 920 x 190 x 129 mm Opening range: 0–220 mm Accuracy: 0.01 mm Weight: 36.5 kg Features & applications Type: Hydraulic milling vice eClass: 21020601 ETIM: EC002173 Suitable for machine-tool clamping in milling operations FAQ What clamping accuracy can be expected with this vice? The vice offers a specified clamping accuracy of 0.01 mm, enabling tight machining tolerances for precision milling. What is the maximum jaw opening of the unit? The opening range is 0–220 mm, which allows the vice to accommodate a wide variety of workpiece sizes. Is the VHO‑5 suitable for heavy-duty milling operations? Yes, the robust construction and weight of 36.5 kg provide stability for heavier milling passes and help maintain cutting accuracy. Which machines is the vice intended for? The VHO‑5 hydraulic milling vice is designed for use on milling machines and machining centres where repeatable clamping is required. How is the VHO‑5 identified for procurement and asset tracking? The product is listed under SKU VHO-5 with GTIN 4061905084980 and the classification codes eClass 21020601 and ETIM EC002173. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of reliable 1,500 kgf clamping force, an extra-wide 0–185 mm opening and 0.02 mm repeatability to keep milling operations consistent and reduce rework. Order the Vertex VJ-400 milling vice directly via Metav Werkzeuge or ask our consultants if needed. Vertex VJ-400 milling vice — extra-wide opening and high clamping force The Vertex VJ-400 milling vice is a mechanical workholding solution designed for demanding milling and machining tasks that require wide jaw capacity and steady clamping. Extra-wide 0–185 mm opening 1,500 kgf clamping force 0.02 mm repeatability accuracy Robust 25 kg construction Consistent clamping for precision machining The vice combines a wide jaw span with measured repeatability to maintain part position throughout machining cycles. With a documented 0.02 mm accuracy and a 1,500 kgf clamping capability, the unit reduces the risk of workpiece shift and minimises corrective machining. This level of stability supports predictable tool paths and contributes to lower scrap rates in series production, offering a tangible productivity advantage for precision-oriented workshops. Faster setup and handling of larger parts An extra-wide opening of 0–185 mm means fewer fixture changes and simpler handling of bulky components. The vice’s mass, approximately 25 kg, provides inherent stability that dampens vibration during heavy cuts, shortening cycle times and reducing the need for frequent re-clamping. As a result, machining sequences can be arranged more efficiently, improving throughput on both manual and CNC milling machines without complex fixturing. Mechanical simplicity for dependable uptime Built as a mechanical design, the vice avoids the failure modes associated with electronic actuation and keeps maintenance straightforward. Fewer moving subsystems translates into predictable service intervals and easy inspection routines, which supports continuous operation in a busy workshop. The straightforward construction also simplifies routine checks and keeps total cost of ownership low over the product’s service life. Compact footprint that fits workshop workflows With external dimensions of 386 x 270 x 135 mm, the vice offers a compact profile that still accepts larger workpieces thanks to its wide opening. The combination of a modest footprint and a generous clamping range makes it suitable as a standard workholding device on many milling tables and benches, improving adaptability across jobs without dedicating extra machine space. Contact Metav Werkzeuge in Emmerich for tailored technical advice and to discuss the Vertex VJ-400 milling vice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VJ-400 Manufacturer: Vertex GTIN: 4061905084140 ECLASS: 21020601 ETIM: EC002173 Facts Opening: 0–185 mm Clamping force: 1,500 kgf Accuracy: 0.02 mm Weight: 25 kg Dimensions: 386 x 270 x 135 mm Special features Milling vice with extra-large opening range Mechanical type Robust construction suitable for milling operations FAQ What opening range does the vice offer? The Vertex VJ-400 milling vice provides an opening range of 0–185 mm, allowing secure clamping of larger workpieces without complex fixtures. How much clamping force is available? The Vertex VJ-400 delivers a clamping force of 1,500 kgf, which supports heavy-duty milling cuts and stable workholding. Is the vice precise enough for fine machining tasks? Yes. The vice is specified with a repeatability of 0.02 mm, making the VJ-400 suitable for many precision milling applications where positional stability is required. What are the dimensions and weight of the unit? The vice measures 386 x 270 x 135 mm and weighs approximately 25 kg, combining a compact footprint with substantial mass for stability. Which machines is this vice intended for? The vice is designed for milling machines and general machining tables where mechanical workholding with a wide opening and high clamping force is needed. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from cast iron rigidity, 800 kgf clamping force and a 0–290 mm opening for reliable workholding; these features support precise, repeatable milling and stable setup. Order the VSM-12 directly via Metav Werkzeuge or ask our consultants if needed. VSM-12 mechanical milling vice — 800 kgf clamping force, 0–290 mm opening (Vertex) VSM-12 is a mechanical milling vice intended for secure workholding in production and toolroom milling, offering robust clamping and consistent positioning for repeatable machining operations 800 kgf clamping force Cast iron construction for stiffness 0–290 mm opening range Accuracy 0.01 mm Consistent clamping that improves machining accuracy The vice combines a cast iron construction with a high clamping force 800 kgf, delivering the rigidity required to reduce vibration and maintain tool engagement during milling. This structural stability translates into fewer reworks and tighter tolerances on finished parts. With a documented accuracy 0.01 mm, the unit supports applications where repeatable positioning is essential, such as precision component manufacture or small-batch production. The mechanical drive avoids electronic calibration, simplifying inspection routines and supporting predictable performance over long runs. Flexible setup and reduced cycle times A wide 0–290 mm opening allows accommodation of a broad range of workpiece sizes without frequent jaw changes, speeding up job changeovers and lowering setup time per operation. The compact footprint, at 304 x 604 x 198 mm, pairs well with many milling machines and table configurations, while the mass of 84 kg helps the vice resist movement under heavy cuts. The mechanical design supports straightforward fixturing and clamping adjustments, which benefits shops that prioritise quick, reproducible setups and efficient use of machine time. Designed for lasting workshop use and easy integration Built as a mechanical vice, the unit emphasises serviceability and robust function over complexity; routine maintenance is limited to inspection and lubrication of moving parts. The combination of durable materials and proven mechanics ensures a long service life in demanding environments. Supplied under the Vertex brand and identified as SKU VSM-12, the vice is suitable as a core element of a workholding strategy where dependability, repeatability and straightforward maintenance matter most. Discuss the Vertex VSM-12 milling vice with Metav Werkzeuge for tailored clamping solutions and assured European supply from our Emmerich quality filter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VSM-12 GTIN: 4061905083495 Manufacturer: Vertex Facts Material: Cast iron Clamping force: 800 kgf Opening: 0–290 mm Accuracy: 0.01 Weight: 84 kg Dimensions: 304 x 604 x 198 mm Type: Mechanical Special features Robust cast iron body High clamping capacity for heavy workholding Suitable for production and toolroom milling Simple mechanical drive for low-maintenance operation FAQ What is the maximum workpiece width the vice can clamp? The vice accepts workpieces up to a 0–290 mm opening range, allowing a wide variety of part sizes to be secured. How precise is the positioning with this vice? Positioning repeatability is specified at 0.01 mm, supporting precision milling and applications that demand consistent tolerances. Is the VSM-12 suitable for heavy-duty milling? The VSM-12, with its cast iron construction and 800 kgf clamping force, is designed to withstand heavy cuts and provide stable workholding in demanding milling operations. Which manufacturer produces this milling vice? This milling vice is produced by Vertex and is listed under SKU VSM-12 and GTIN 4061905083495. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of 450 kgf clamping force, a double opening 0–50 mm capacity and a compact 18.2 kg build delivers stable, repeatable clamping for demanding machining tasks; secure reliable throughput and consistent accuracy for production environments. Order the machine vice directly via Metav Werkzeuge or contact our consultants for application advice. VCV-4D Machine vice by Vertex – double opening, 450 kgf clamping force The VCV-4D is a precision machine vice with dual opening jaws designed for reliable clamping during milling, drilling and general machining operations Double opening 0–50 mm (two jaws) 450 kgf clamping force High repeatability with 0.01 mm accuracy Robust 18.2 kg construction Precise, repeatable clamping that raises machining quality The VCV-4D stands out for its accuracy and consistency: a specified repeatability of 0.01 mm ensures that workpieces remain within tight tolerances across repeated setups. This high level of precision reduces scrappage and rework, improving first-pass yield in series production. The measurable repeatability also simplifies process validation and quality documentation for production control, making the vice suitable for toolrooms and small-batch manufacturing where dimensional integrity is essential. Faster setup and improved workflow through a dual-jaw concept The vice's double opening design, with two jaws operating across an opening range of 0–50 mm, enables parallel clamping of paired parts or rapid repositioning without full re-clamping. The configuration shortens cycle times for batch tasks and supports effective fixturing strategies on the machine table. For operations that require frequent part changes, the dual jaws reduce downtime and help sustain machining throughput, presenting a clear efficiency advantage in both prototyping and repetitive machining. Built for durability under workshop conditions Constructed to a total weight of 18.2 kg, the device provides a stable base that resists vibration during heavy cuts, supporting consistent tool life and surface finish. The specified 450 kgf clamping force delivers secure grip on a wide range of components without overloading the workpiece. Robustness in mechanical design translates into longer service intervals and predictable performance, which lowers total cost of ownership in the medium term and supports continuous production cycles. Simple integration and straightforward handling for everyday use The vice requires no specialised consumables and integrates easily with standard machine tables and fixtures. Adjustment and mounting follow familiar workshop practises, enabling fast commissioning on CNC mills or manual machines. The compact footprint (469 x 108 x 92 mm) balances clamping capacity and table space, allowing for flexible fixturing layouts. For teams seeking dependable, low-complexity clamping, this device combines practical ergonomics with the technical features needed for repeatable results. Contact Metav Werkzeuge to discuss how the Vertex VCV-4D’s 450 kgf clamping force and dual 0–50 mm jaws can increase machining reliability; Metav’s advisors in Emmerich are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: VCV-4D GTIN: 4061905084133 eClass: 21020601 ETIM: EC002173 Key measurements Dimensions: 469 x 108 x 92 mm Weight: 18.2 kg Clamping force: 450 kgf Opening: 0–50 mm (two jaws) Accuracy: 0.01 mm Special features Machine vice Double opening (two jaws) Robust workshop construction Vertex brand FAQ Is the vice suitable for repeated production runs? The vice offers a repeatability of 0.01 mm, which makes the VCV-4D well suited to repeated production tasks where consistent clamping and dimensional control are required. Can the vice clamp two separate parts at once? Yes, the dual opening arrangement and the 0–50 mm range allow parallel or staggered clamping, enabling handling of paired components or faster changeovers. What clamping force can be expected during heavy machining? The vice provides a clamping force of 450 kgf, delivering secure hold for a wide range of milling and drilling operations without compromising stability. Does the VCV-4D require special fixtures to mount on a machine table? The unit is designed to integrate with standard machine tables and common fixturing methods; no specialised mounting equipment is mandatory. How does the vice contribute to process reliability? By combining high repeatability and a stable structural mass (18.2 kg), the vice reduces movement and vibration, helping to maintain tool life and surface finish consistency across production cycles. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise clamping, a 0–85 mm opening and a compact footprint for consistent drilling results. Order the vice directly via Metav Werkzeuge or consult our specialists for application advice. DV-85 Drill Vice by Vertex — 0–85 mm opening, compact design A DV-85 drill vice designed for secure clamping on drill presses and small machine tables, offering a wide adjustable 0–85 mm opening for varied workpiece widths. Secure clamping across 0–85 mm Compact footprint for tight workspaces Lightweight at 3.5 kg for easy repositioning Consistent hole quality through controlled clamping The vice provides a reliable gripping range of 0–85 mm, ensuring repeatable positioning for sequential drilling tasks. By holding components firmly, the device reduces workpiece movement and thus lowers the risk of misaligned holes and rework. The controlled clamping action supports stable machining conditions, which translates directly into improved productivity and fewer rejects during batch operations. Clear mechanical limits make set-up times predictable and help maintain the same datum across multiple parts. Space-saving design that integrates with workshop layouts With external dimensions of 167 x 287 x 56 mm, this vice offers a compact footprint that fits on small drill press tables and crowded benches. The moderate mass of 3.5 kg balances stability with portability, allowing the unit to be repositioned when workflows change or when different machines require the vice. The design supports efficient use of floor and table space, enabling workshops to maintain flexibility without sacrificing the solidity needed for accurate drilling tasks. Practical reliability for everyday machining processes Engineered for straightforward use in a production or repair setting, the vice simplifies routine operations by combining a wide clamping range with a compact form factor. The model aids in reducing setup variance between operations, promoting smoother process flows and consistent results. Suitable for shop environments that prioritise repeatability and ease of handling, this vice contributes to a dependable machining chain that supports uptime and steady throughput. Contact Metav Werkzeuge today to discuss how the DV-85 can fit into current workflows or to receive tailored advice from our Emmerich-based team Technical Data Article number: DV-85 GTIN: 4061905083907 eClass: 21020601 ETIM: EC002173 SKU: DV-85 Facts Opening range: 0–85 mm Dimensions: 167 x 287 x 56 mm Weight: 3.5 kg Special features Product type: Drill vice Brand: Vertex Suitable for drill press and bench use Compact design for small workspaces FAQ What maximum workpiece width does the vice accept? The vice accommodates workpieces up to 85 mm thanks to its 0–85 mm adjustable opening, allowing flexibility for a range of component sizes. What are the external dimensions and weight? External measurements are 167 x 287 x 56 mm and the unit weighs 3.5 kg, offering a compact and manageable solution for workshop tables. Which manufacturer produces this vice? The vice is produced by Vertex; the product is listed as the DV-85 drill vice from Vertex. What identifying codes are associated with the product? Relevant identifiers include SKU: DV-85, GTIN: 4061905083907, eClass: 21020601, and ETIM: EC002173. Is the vice suitable for bench-mounted drill presses? The design and footprint make it suitable for use on drill press tables and benches where a compact, adjustable clamping solution is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact component that delivers a secure clamping interface and straightforward compatibility with standard 10 mm profiles; combine reliable fastening, precise fit and rapid procurement via Metav Werkzeuge for uninterrupted workshop workflows. Order the part directly through Metav Werkzeuge or consult the technical team for application guidance. 3412M — Vertex T-slot nut, compatible with 10 mm profiles and M8 threading 3412M is a compact T-slot nut designed for secure fixture in 10 mm T-slots, suitable as a single supply item for machine tables and fixture systems Compatible with 10 mm T-slot profiles M8 thread for secure fastening Compact dimensions 9.7x22x6 mm Supplied as a single item Precise engagement with 10 mm profiles for dependable fixturing The T-slot design offers a consistent mechanical interface that aligns with standard 10 mm slot profiles, ensuring repeatable positioning and reduced setup time. The low-profile, compact geometry (9.7x22x6 mm) minimises interference within assemblies while providing a stable bearing surface for clamping elements. In practice, this results in fewer alignment checks during part changeovers and a more efficient workflow when integrating the nut into modular fixturing systems. Secure M8 fastening that supports reliable clamping forces Threaded engagement is provided by an M8 thread, which is widely used in workshop and industrial fixtures for its balance of strength and accessibility. The internal thread allows conventional bolts or studs to be used without additional adapters, simplifying inventory and assembly processes. As a result, clamping assemblies can be tightened to the required torque using standard tools, delivering consistent holding forces and lowering the risk of slippage under operational loads. Engineered compatibility and supply reliability through a trusted channel Manufactured by Vertex, this component is intended for integration into fixture plates, machine tables and clamping rails where a standard T-slot nut is required. Supplied individually, the item is well suited for targeted replacements or small runs where bulk packs are unnecessary. Procuring the part via Metav Werkzeuge provides access to quality-controlled stock and the specialist know-how of a precision partner, supporting seamless procurement and installation in industrial and trade environments. For application advice or compatibility checks for the Vertex 3412M T-slot nut, contact Metav Werkzeuge to request a fitment recommendation or technical clarification through their sales and consultancy channels Technical Data Article number: 3412M GTIN: 4061905084157 EClass: 21029107 Core dimensions Overall size: 9.7 x 22 x 6 mm Slot compatibility: 10 mm Thread: M8 Features & suitability Type: T-slot nut, single item supply Brand: Vertex Images: technical drawing and product detail available FAQ What slot size is this nut designed for? The item is intended for 10 mm T-slot profiles and provides a standardised interface for fixture systems. Which thread size does the nut accept? The nut features an M8 internal thread suitable for common bolts and studs used in clamping assemblies. Can this part be used as a replacement in existing fixtures? Yes, the Vertex 3412M T-slot nut is designed for straightforward replacement in compatible 10 mm profile systems. Is the product supplied individually or in sets? This entry is supplied as a single item, indicated by the single-item designation for targeted replacements. Where can technical drawings be obtained? Technical drawings and product images are available via the product listing and can be consulted before installation to confirm fitment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the compact dimensions and standard M8x1.25 thread to speed up assembly and reduce part mass in confined installations; the lightweight design and Vertex quality ensure consistent handling and simple stocking via Metav Werkzeuge — order directly through Metav Werkzeuge or consult the team for procurement guidance. Vertex coupling 2612M – compact coupling with M8x1.25 thread A Vertex coupling designed for mechanical connections in confined assemblies, offering a compact 13 x 22 mm footprint and compatibility with standard M8x1.25 threaded components. Compact 13 x 22 mm footprint Compatible with M8 x 1.25 thread Lightweight at 0.033 kg Technical drawing and detail images available Space-saving form that keeps assemblies compact and predictable The compact 13 x 22 mm format reduces the installation envelope, enabling denser layouts on fixtures and jigs without compromising service access. With a mass of 0.033 kg, extra rotating or moving masses are minimised, which can contribute to lower inertia in dynamic assemblies. The standard M8x1.25 specification denotes a metric thread with a 1.25 mm pitch, meaning the part will mate reliably with common M8 fasteners and tapped holes. This combination of small footprint and standard threading supports faster component selection and simpler inventory management, while the clear dimensional data aids in collision checks and CAD planning. Designed for straightforward integration and dependable mechanical connection The coupling functions as a mechanical connector for threaded interfaces, designed to join components where a compact threaded junction is required. Compatibility with the M8x1.25 thread ensures interchangeability with widely used fasteners, reducing the need for bespoke machining. The visible technical drawing and detailed images allow quick verification of fit and orientation before assembly. Where thread engagement is critical, matching the mating thread quality and ensuring appropriate tightening practice secures a consistent connection; the compact geometry also simplifies access with standard hand tools, reducing assembly time and the potential for rework. Procurement reliability and workshop-ready supply from Metav Sourcing the part through established channels reduces lead-time risk for production and maintenance operations. Metav Werkzeuge operates as a quality filter for the European market, providing a central supply point for precision parts and workshop essentials. Stocking a concise, standardised coupling such as this supports predictable reordering and helps maintain continuity in production processes. The Vertex name indicates manufacturer origin for traceability, while the available technical files support purchasing decisions and quality checks during incoming inspection. Secure the Vertex coupling 2612M for your next compact assembly via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for order placement or procurement advice and benefit from their European stock and quality filter. Technical data SKU: 2612M GTIN: 4061905084799 eClass: 21131711 Facts Size: 13 x 22 mm Thread: M8 x 1.25 mm Weight: 0.033 kg Special features Designation: Coupling Brand: Vertex Technical drawing and detailed images available FAQ What thread does the coupling use? The coupling is specified with an M8 x 1.25 thread, compatible with standard M8 fasteners and tapped holes. What are the external dimensions of the part? External dimensions are 13 x 22 mm, suitable for installations with limited space. How much does the coupling weigh? The coupling weighs 0.033 kg, approximately 33 grams. Are technical drawings available for fit verification? Yes, technical drawings and detailed images are provided for the coupling 2612M to assist with fit checks and planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Efficient precision clamping and a compact footprint combine to improve setup speed and machining consistency; order the collet directly via Metav Werkzeuge or consult our specialists for application advice. VCL-2C collet — Vertex precision clamping, 1-7/8" opening, compact 120×84 mm The VCL-2C is a precision collet intended for secure workpiece retention in machining and light workholding applications, offering a defined opening for standardised clamping. Precision clamping for consistent concentricity 1-7/8" bore for oversized toolholders Compact 120×84 mm footprint Lightweight design 0.22 kg Reliable concentricity for repeatable results The collet is engineered to provide precision clamping that helps maintain concentricity across repeated setups. By centring the workpiece accurately within the holder, the clamping sleeve reduces runout and contributes to consistent machining tolerances, which translates into fewer rejects and less rework. A focused design for axial alignment ensures stable cutting conditions and predictable outcomes in serial production. Space-saving format that eases workshop workflows With a compact 120×84 mm footprint and lightweight construction of 0.22 kg, this clamping component minimises the space required in storage and on the workbench. The modest dimensions support efficient tool changes and simpler handling during fixture preparation. As a result, throughput can be improved where bench or turret space is at a premium, while still retaining robust clamping performance suitable for routine shopfloor tasks. Faster setups through consistent clamping behaviour Consistent mechanical behaviour is the foundation for reduced setup times. The collet's geometry delivers reliable grip and repeatability, helping to shorten alignment and verification steps between jobs. Reduced variation in clamping force supports quicker measurement cycles and easier interchangeability of parts, enabling operators to maintain machining momentum and keep production schedules on track. Transparent identification and industrial compatibility Manufactured by Vertex, the component is documented for straightforward procurement and inventory control, with clear identifiers for ordering and classification. The plain specification of the opening and dimensions enables straightforward matching to compatible toolholders and machine spindles. Where exact machine compatibility or integration questions arise, the technical data provides a concise reference for selection and planning. Contact Metav Werkzeuge for procurement and application guidance on Vertex collets such as the VCL-2C — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply from Emmerich Technical specifications SKU: VCL-2C GTIN: 4061905083921 ECLASS: 21041712 Designation: Collet Core dimensions Opening: 1-7/8" Overall dimensions: 120×84 mm Clamping depth: 47.63 mm Weight: 0.22 kg Features & references Brand: Vertex Image assets available Category: Clamping technology / collets FAQ What clamping diameter does this component provide? The VCL-2C collet offers an opening of 1-7/8", sized for workpieces and toolholders that match this nominal bore. What are the overall dimensions and weight for storage planning? Overall dimensions are 120×84 mm and the unit weight is 0.22 kg, simplifying storage and handling calculations. How does the clamping geometry affect machining accuracy? The clamping geometry of this collet promotes consistent concentricity and repeatability, which supports tight machining tolerances and reduced rework. Which toolholders or spindles is this compatible with? Compatibility is determined by the 1-7/8" opening and standard collet interfaces; verify the receiving toolholder or spindle specification against these nominal values for correct pairing. What identifiers should be used when ordering or specifying this part? Use the SKU VCL-2C and GTIN 4061905083921 for unambiguous ordering and classification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, anodised aluminium solution that seals a 10 mm slot while keeping dust and debris under control; the slim 8 mm profile and 300 mm length ensure a precise fit and simple replacement. Order directly via Metav Werkzeuge or consult the Metav team for compatibility checks and availability. VST-10 — Cover for Milling Table Slot (Vertex), anodised aluminium, 300 mm The VST-10 is a low-profile cover designed to close a 10 mm slot in milling and router tables, improving safety and reducing chip ingress during routine machining. Anodised aluminium construction Length 300 mm, height 8 mm Set of 6 for 10 mm slots Increased safety and cleaner working area The cover provides a straightforward way to reduce the risk of small tools or swarf entering the table slot; by closing the gap the slot cover contributes to a tidier and safer workbench. Its flat, low-profile design minimises interference with fences and sliding jigs while maintaining access when the cutter requires it. This translates into fewer interruptions for cleaning and less chance of loose debris affecting feed accuracy, a practical improvement for everyday workshop routines. Robust material and precise dimensions for lasting performance Manufactured from anodised aluminium, the component offers improved corrosion resistance compared with untreated aluminium and remains dimensionally stable under normal shop conditions. The 300 mm length and 8 mm height deliver a predictable, repeatable fit for standard table slots; compatibility is specified for a 10 mm slot width. The item’s lightweight nature (0.1 kg) reduces strain during handling yet provides sufficient rigidity for routine use, supporting long-term reliability in production or a busy maintenance bay. Set configuration for rapid maintenance and standardisation Supplied as a set of six, the covers simplify inventory management and mean rapid replacement across multiple machines or stations. Standardised components reduce downtime and make it easier to maintain consistent safety and dust-control practices across the workshop. The straightforward geometry allows quick inspection and swap-out without the need for special tools, helping to keep machine availability high and maintenance effort low. Choose the Vertex VST-10 for dependable slot protection; contact Metav Werkzeuge for current stock information and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VST-10 GTIN: 4061905083525 Material: anodised aluminium Weight: 0.1 kg Dimensions & measurable data Length: 300 mm Height: 8 mm Suitable slot width: 10 mm Pieces per set: 6 Features & compatibility Set configuration for multiple stations Low-profile slot cover Classification eClass 21189223 FAQ What slot width is the cover designed for? The cover is designed for a 10 mm slot and the VST-10 ensures a close fit for standard milling and router table slots. How is the VST-10 protected against corrosion? The VST-10 is made from anodised aluminium, which increases corrosion resistance compared with untreated aluminium. How many pieces are supplied per set? The product is supplied as a set of six, allowing for rapid replacement or use across several machines. Will the cover interfere with table fences or jigs? The low-profile 8 mm height of the cover minimises interference with fences and sliding jigs while maintaining slot sealing. Is the cover heavy to handle during installation? At 0.1 kg, each cover is lightweight, facilitating quick handling and replacement without additional tools. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact and reliable: the combination of a 300 x 300 mm table and 15° indexing provides precise, repeatable angular positioning for machining and assembly tasks. Order the precision indexing table directly via Metav Werkzeuge or ask the consultants for tailored advice. VIT-300-15 Precision Indexing Table — 300 x 300 mm tabletop, 15° indexing — Vertex A VIT-300-15 is a precision indexing table designed for repeatable angular positioning in workshop and production environments. 300 x 300 mm rigid table surface 15° indexing for quick repositioning Rotates clockwise and counter-clockwise 14 mm T-slots for secure clamping Precision that keeps production on schedule The unit delivers consistent angular steps thanks to its 15° indexing, enabling fast, repeatable set-ups that reduce non-productive time. With an emphasis on measurable accuracy (listed as accuracy class 3), the rotary solution supports processes where positional certainty is essential. The generous 300 x 300 mm working surface simplifies fixture placement and, when combined with the indexing mechanism, decreases cycle variability—resulting in improved throughput and predictable component quality. Robust workholding for reliable processes Built for stability, the table’s substantial mass (94 kg) and integrated 14 mm T-slots provide a secure platform for clamping standard tooling and workpieces. The design allows rotation clockwise and counter-clockwise, which supports flexible machining sequences and eases toolpath planning in both manual and automated workflows. These mechanical properties translate into fewer re-clamps, reduced vibration during operation and a lower risk of setup-related rejects, so production runs remain consistent. Integration and set-up made straightforward The indexing table is engineered for straightforward integration into existing benches and machines, providing repeatable angular positioning without complex adjustments. Explanation: indexing means the table stops at defined angular increments (here 15°), so cuts, drilling or measuring steps can be executed with minimal alignment effort. The compact footprint and standard clamping interfaces support quick installation and compatibility with common workshop fixtures, helping to maintain a steady production flow with minimal training required. Contact Metav Werkzeuge for tailored technical advice and order handling; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: VIT-300-15 GTIN: 4061905084492 Eclass: 36600310 Manufacturer: Vertex Facts Table dimensions: 300 x 300 mm Height: 160 mm Indexing step: 15° T-slot width: 14 mm Weight: 94 kg Accuracy class: 3 Special features Rotates clockwise and counter-clockwise Precision indexing for repeatable angular positioning Rigid table surface for stable clamping Suitable for workshop and production environments FAQ What indexing increment does the table provide? The VIT-300-15 provides a 15° indexing increment for defined angular steps, suitable for rapid repositioning during machining and assembly. Can the table rotate in both directions? Yes, the Vertex precision indexing table rotates clockwise and counter-clockwise, enabling flexible operation sequences and easier alignment. What are the tabletop dimensions and clamping options? The tabletop measures 300 x 300 mm and includes 14 mm T-slots for secure attachment of fixtures and standard clamps. How heavy is the unit and what stability does that give? At 94 kg, the device offers a stable base that reduces vibration and improves repeatability, supporting reliable machining cycles. Is the table suitable for both manual and CNC-assisted setups? The precision index table from Vertex is designed for workshop and production use, integrating easily with manual benches and automated systems where repeatable angular positioning is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of fine-thread accuracy, compact length and very low weight ensures reliable clamping performance in confined assemblies; the M8 x 1.25 thread and 75 mm length provide a predictable fit and consistent clamp force. Order the clamping screw directly via Metav Werkzeuge or ask our consultants for assistance. Clamping Screw 1323M by Vertex – M8 x 1.25 thread, 75 mm length the Clamping Screw 1323M is designed for secure fixture and jig assembly in workshop and industrial clamping applications M8 x 1.25 thread precision 75 mm overall length Lightweight 23 g for easy handling Secure clamping that keeps setups stable A compact clamping element can make a measurable difference to process reliability. The clamping screw here combines a standard M8 x 1.25 metric thread with a defined length to deliver consistent engagement in threaded holes or tapped clamping plates. For production jigs and short-reach fixtures this reduces play and repeatability issues, resulting in fewer set-up adjustments and less downtime. The practical benefit is a steadier machining or assembly process and predictable component location during processing. Thread and length explained for compatibility The fine pitch M8 x 1.25 thread offers a balance between holding strength and fine adjustment; it engages more gradually than coarse alternatives, allowing precise tightening without overshoot. The 75 mm overall length gives sufficient reach for many clamping configurations while avoiding unnecessary protrusion that could interfere with tooling or adjacent parts. Specifying a standard metric thread simplifies procurement and inventory management, especially when multiple fixtures share the same fasteners. Benefits at the bench and on the line In workshop environments where multiple clamping points are required, the low mass of the fastener makes handling and rapid assembly easier. At just 23 g, these screws are simple to position during repetitive operations and reduce operator fatigue when compared with heavier alternatives. The consistent geometry supports modular fixture systems and quick-change setups, helping to maintain throughput while protecting finished tolerances. Robust use cases and quality expectations Supplied under the Vertex name, this clamping hardware suits general fixture assembly, small machine guards and toolholding adaptors where a reliable threaded connection is needed. While the specification here focuses on geometry and weight, the practical outcome is improved process control: fewer reworks, faster cycle starts and a tidy parts list for purchasing. Where higher-level material or coating specifications are required, refer to the manufacturer’s technical documentation for confirmation. Choose Vertex clamping hardware for dependable fixture performance and contact Metav Werkzeuge for tailored advice or to secure the 1323M for your next project through our Emmerich quality filter Technical data SKU: 1323M GTIN: 4061905084010 Manufacturer: Vertex Facts Length: 75 mm Thread: M8 x 1.25P Weight: 0.023 kg Special features Intended for clamping applications Compact form for confined spaces Standard metric thread for broad compatibility FAQ What thread standard does this clamping screw use? The clamping screw is specified with an M8 x 1.25 metric thread, suitable for standard tapped holes and common clamping plates. What is the overall length and is it suitable for short-reach fixtures? Length is 75 mm, which is designed for short to medium reach applications such as jigs and compact fixtures. Is the material or coating specified for this product? Material and coating are not specified in the available data; consult Vertex technical documentation for confirmed material and surface treatment details. Can this fastener be used in modular fixture systems? Yes. The standard metric thread and compact length make the screw appropriate for modular fixtures and repeatable clamping setups. What identifiers help with ordering and traceability? Use SKU 1323M and GTIN 4061905084010 for ordering and inventory tracking Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision-ground reference surfaces and a 0.01 mm tolerance to ensure repeatable set-ups and reduced rework; order the set directly via Metav Werkzeuge or consult our specialists for application advice. VP-100 Parallel block set by Vertex — precision-ground, calibrated to 0.01 mm The VP-100 Parallel block set is a precision-ground toolkit for accurate workholding and setup in machining and inspection applications, designed to provide stable reference faces and reliable height support. Precision-ground parallels, tolerance 0.01 mm Comprehensive range from small to larger sizes Includes two clamping brackets for secure holding Heavy, stable set for vibration-free setup Constant reference for repeatable machining accuracy A precision-ground set delivers a stable datum that reduces setup variation and scrap. The ground surfaces provide an exact bearing that is easy to replicate across multiple jobs, enabling repeatable set-ups and consistent part quality. With an indicated tolerance of 0.01 mm, the kit supports fine positional control when aligning workpieces for milling, drilling or inspection. These characteristics shorten alignment time and improve throughput by reducing the need for frequent re-measurement. Flexible support for a wide range of workpieces The included parallels cover a broad spectrum of heights and contact areas, allowing secure support for small components as well as larger workpieces. This comprehensive selection simplifies fixture construction and makes it possible to adapt quickly to different clamping scenarios on a machine table or inspection bench. The presence of dedicated clamping brackets means the parallels can be locked in place for vibration-free operation, improving machining consistency and reducing operator intervention between cycles. Robust design tailored for everyday workshop use Designed for regular workshop handling, the set offers a balanced mass that contributes to stability during machining. The overall weight of 11.7 kg gives the kit a sturdy feel and helps resist movement under cutting forces. Surfaces finished by precision grinding are less prone to rapid wear, which maintains accuracy over time and lowers lifecycle costs. The kit’s layout and solid build support efficient storage and rapid retrieval, so setups remain quick without compromising on durability. For precision-critical setups, request the Vertex VP-100 parallel block set through Metav Werkzeuge and discuss the optimal configuration for specific applications with our Emmerich-based specialists Technical Data Article number: VP-100 Manufacturer: Vertex GTIN: 4061905084270 eClass: 21170610 Facts Dimensions: 390 × 292 × 84 mm Weight: 11.7 kg Accuracy: 0.01 mm Pieces per set: 18 Special features Precision-ground finish Contents: parallels 5×16×100 mm, 6×18×100 mm, 8×24×100 mm, 10×30×100 mm, 12×36×150 mm, 14×48×150 mm, 18×60×150 mm, 22×62×150 mm Includes two clamping brackets 15×31×2.5×200 mm Suitable for machining table setup and inspection fixtures FAQ What level of accuracy can be expected from this set? The VP-100 parallel block set from Vertex is specified with an accuracy of 0.01 mm, providing a precise reference for alignment and measurement tasks. Which sizes are included in the set? The kit contains a range of parallels from small to larger footprints (examples: 5×16×100 mm up to 22×62×150 mm) plus two clamping brackets, offering versatile support options for various workpieces. Can the set be used for both setup and inspection tasks? Yes, the precision-ground reference faces make the VP-100 suitable for workholding on machine tables and as stable supports on inspection benches. How should the parallels be maintained to preserve accuracy? Keep the parallels clean and dry, avoid shocks, and store them in their protective case or a reserved drawer to maintain the ground surfaces and dimensional stability. Are clamping brackets supplied with the set? Yes, the set includes two clamping brackets that allow secure fixation of the parallels for machining and measurement operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine a soft stop for irregular components with precision to 0.01 mm and a compact footprint to achieve reliable clamping and consistent measurement results in daily workshop use. Order the Vertex Universal Jaws directly via Metav Werkzeuge or ask our consultants for fitting and compatibility advice. Vertex Universal Jaws VWSJ-R100 — universal caliper jaws with soft stop and precision contact The Vertex Universal Jaws VWSJ-R100 are replacement jaws for precision calipers, engineered to secure uneven or delicate workpieces while preserving repeatable measurement contact in inspection and assembly tasks. Soft stop for irregular workpieces Compatible with calipers 100–110 mm Precision to 0.01 mm Compact dimensions 145 x 38 x 49 mm Improve measurement repeatability with precision contact Replacing worn or generic jaws with a purpose-designed set offers an immediate gain in repeatability. The VWSJ-R100 provides a precision 0.01 mm contact surface that reduces measurement scatter when used with calipers having a jaw width of 100–110 mm. The controlled contact force delivered by the integrated soft stop minimises deformation of delicate parts and lessens the need for repeated checks, thereby improving throughput in quality-control routines. Streamline inspection workflows with a compact retrofit A compact footprint of 145 x 38 x 49 mm means these jaws integrate without obstructing access to the workpiece or measuring scale, supporting faster setup and clearer reading. The design enables quick replacement on compatible calipers and keeps handling straightforward during repetitive measurement sequences. As a practical result, inspection stations benefit from reduced downtime and more consistent data capture during batch checks. Protect sensitive components while maintaining clamp reliability The inclusion of a soft stop is especially valuable when measuring irregularly shaped or fragile items; it absorbs uneven contact points and prevents marring. This function combines with the jaws’ engineered contact geometry to maintain reliable grip without excessive clamping force. For workshops handling small series, prototypes or mixed-material assemblies, this balance safeguards components while preserving the integrity of measurement results and assembly operations. Contact Metav Werkzeuge for tailored advice on fitting the Vertex Universal Jaws VWSJ-R100 to existing calipers and to arrange prompt delivery from our Emmerich quality hub Technical Data Article number: VWSJ-R100 GTIN: 4061905083914 ECLASS: 21029107 Core specifications Dimensions: 145 x 38 x 49 mm Accuracy: 0.01 mm Caliper jaw width suitability: 100–110 mm Special features Soft stop for irregular workpieces SKU: VWSJ-R100 Brand: Vertex FAQ What calipers are compatible with these jaws? The Vertex Universal Jaws VWSJ-R100 are compatible with calipers featuring a jaw width of 100–110 mm and are intended as a direct replacement set for such instruments. Will the soft stop prevent damage to delicate parts? Yes, the soft stop on the VWSJ-R100 reduces point loading on uneven surfaces, helping to protect delicate components while maintaining stable contact for measurements. How precise are measurements when using these jaws? When fitted and used on compatible calipers, the VWSJ-R100 supports repeatable contact with an accuracy of 0.01 mm, improving consistency across inspection cycles. Is the VWSJ-R100 suitable for high-volume workshop use? The compact design and reliable contact behaviour make the Vertex jaws suitable for frequent measurement tasks in production and inspection environments where quick jaw changes and consistent results are required. Can these jaws be used on calipers from other manufacturers? Compatibility depends on the caliper jaw width and mounting arrangement; the VWSJ-R100 is specified for 100–110 mm jaw width—confirm mechanical fit before installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from reliable machine illumination with IP67 waterproof protection and wide 100–240 V compatibility for uninterrupted operation; the compact 448 mm form and 2.2 kg build combine robustness with simple machine integration. Order the product directly via Metav Werkzeuge or ask our consultants for assistance. Vertex LED machine lamp (VLED-W13) — IP67 waterproof, 100–240 V The Vertex LED machine lamp is a waterproof machine-mounted light designed for demanding workshop and production environments, delivering steady illumination where precision matters. Robust IP67 waterproof rating Wide voltage 100–240 V compatibility Stable 448 mm length for close‑up lighting Solid 2.2 kg construction for secure mounting Consistent illumination that reduces errors The LED array provides bright, even light that minimises shadows at the cutting edge, helping to reduce visual fatigue and inspection mistakes. The high‑efficiency LED source offers long service life and low energy consumption compared with filament lamps, which translates into fewer replacements and lower operating costs. This technical reliability supports lean production by contributing to consistent part quality and fewer interruptions on the shop floor. Built for wet and dusty workshop conditions With an IP67 rating the luminaire is dust‑tight and protected against temporary immersion, ensuring performance in splashy, coolant‑exposed or dusty areas. The robust housing combined with a 2.2 kg mass gives the unit stability once mounted, while the compact 448 mm length keeps the light close to the workpiece without obstructing access. The 100–240 V input range removes the need for special power adaptors in most industrial settings, simplifying international deployment and reducing installation complexity. Simple integration and low maintenance Electrical and mechanical integration is straightforward thanks to the lamp's broad voltage acceptance and standard form factor, which eases planning for retrofits or new machine installations. The LED design is effectively maintenance‑free compared with bulb‑based alternatives, reducing downtime and spare‑parts management. For procurement and traceability the item is identified as VLED‑W13, with Vertex documentation available to support correct installation and compliance in industrial applications. Contact Metav Werkzeuge to confirm compatibility for your machines and to arrange supply from our Emmerich warehouse; our specialists will advise on seamless integration of the Vertex VLED‑W13 into existing production lines Technical data Article number: VLED‑W13 GTIN: 4061905005671 Brand: Vertex Core specifications Weight: 2.2 kg Length: 448 mm Voltage: 100V–240V Protection class: IP 67 Features & compatibility Waterproof construction (IP67) Wide input voltage range 100–240 V Suitable for 12 W incandescent bulb (as stated) SKU: VLED‑W13 FAQ What environments is this lamp suitable for? The Vertex LED machine lamp (VLED‑W13) is designed for workshop and industrial use, with an IP67 rating that protects against dust and temporary immersion. What power supply does the lamp require? The unit accepts 100–240 V, allowing connection to common industrial and international supplies without additional converters for the Vertex VLED‑W13. How large and heavy is the lamp? The lamp measures 448 mm in length and weighs 2.2 kg, dimensions that support close machine mounting while remaining compact. Is the lamp easy to integrate into existing machines? Yes, the VLED‑W13’s standard form factor and wide voltage compatibility simplify electrical and mechanical integration and reduce retrofit planning time. Where can the product identification be found for ordering? The lamp is listed under SKU VLED‑W13 and GTIN 4061905005671; Vertex documentation accompanies the product for installation reference. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, modular clamping solution with 0.01 mm repeatability and a solid 8.5 kg mass to stabilise machining operations; order the Vertex VMP-44D directly via Metav Werkzeuge or consult our specialists for application advice. VMP-44D – Modular machine vice by Vertex, 0.01 mm accuracy The VMP-44D is a modular machine vice designed for precise clamping in machining environments, offering a compact footprint and reliable repeatability for milling, drilling and general workshop tasks Modular design for flexible fixturing High precision: 0.01 mm accuracy Solid 8.5 kg mass for improved stability Compact dimensions 100 x 140 x 65 mm Consistent precision for repeatable results A declared accuracy of 0.01 mm provides measurable control over part positioning, which translates into fewer rejected parts and reduced rework. In practice, this level of repeatability supports tight tolerances in batch production and prototype work alike, allowing engineering teams to trust positional outcomes. The specification is particularly relevant where consistent clamping pressure and minimal lateral play are essential for downstream operations. Modular configuration that accelerates setup The vice’s modular concept reduces fixture complexity by enabling adaptable clamping arrangements. By allowing straightforward reconfiguration, the system shortens setup cycles and supports a wider range of workpiece geometries without extensive tooling inventories. For process planners, this means less machine downtime and improved throughput when switching between jobs that require different clamping schemes. Compact mass and footprint for stable machining With a mass of 8.5 kg and external dimensions of 100 x 140 x 65 mm, the assembly combines a small footprint with sufficient inertia to dampen vibration on a machine table. The resulting stability helps maintain cut quality and dimensional integrity during feed and speed variations. Its compact size also makes it suitable for smaller machining centres where table space is at a premium while still delivering dependable clamping force distribution. Built for workshop integration and predictable performance Designed as a practical clamping unit, the vice integrates easily into existing setups and complements modular tooling systems. The straightforward specification supports maintenance planning and inventory control; the compact design eases handling and storage when not mounted. For operations focused on predictable cycle times and consistent output, the vice provides a balanced combination of precision, versatility and robustness. For procurement of the Vertex VMP-44D or to review compatibility with specific machines, contact Metav Werkzeuge for tailored advice and supply options by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical data SKU: VMP-44D GTIN: 4061905083211 Brand: Vertex ECLASS: 21020601 ETIM: EC002173 Facts Accuracy: 0.01 mm Weight: 8.5 kg Dimensions: 100 x 140 x 65 mm Special features Type: Modular Product: Machine vice Title in shop: Maschinenschraubstock Vertex FAQ What level of positional accuracy can be expected from this vice? The VMP-44D machine vice is specified with an accuracy of 0.01 mm, which supports tight repeatability for precision machining tasks and helps reduce scrap and rework. Is the vice suitable for small machining centres with limited table space? Yes, the compact external dimensions of 100 x 140 x 65 mm and a mass of 8.5 kg make the vice appropriate for machines where footprint and stability must be balanced. How does the modular design benefit fixture planning? The modular configuration of the vice enables adaptable fixturing and quicker reconfiguration between jobs, which simplifies fixture inventories and shortens machine setup times. Which manufacturer produces this product and what is the model designation? The product is the Vertex VMP-44D modular machine vice, produced by Vertex and supplied under the SKU VMP-44D. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of the vice's 20 kN clamping force together with a cast iron construction and a compact 103 mm profile ensures secure workholding and consistent accuracy on medium‑duty machining tasks; order the vice directly via Metav Werkzeuge or consult the Metav team for application advice. Hydraulic machine vice VNC-100FV by Vertex — modular 20 kN clamping for precise machining The Hydraulic machine vice VNC-100FV is a modular clamping unit designed for workshop and production machines, providing robust hydraulic clamping for reliable part fixation. 20 kN clamping force for secure fixation Modular design for flexible setup Cast iron construction for high rigidity Accuracy 0.01 mm for precise positioning Consistent clamping for reliable production The hydraulic design delivers repeatable clamping pressure, which, combined with a 20 kN rated hold, reduces part movement during cutting and finishing. The vice's cast iron body dampens vibration and helps maintain tool life, while the hydraulic actuation removes manual torque variation that can affect outcomes. This combination translates into fewer rejects and a steadier machining cycle, supporting stable throughput on milling and drilling machines. Modular layout adapts to varied setups A modular concept reduces changeover time: the vice is offered in two table sizes (100×150 mm and 100×228 mm), enabling selection according to part dimensions and fixture space. The modular approach allows integration into different machine tables and fixture recipes, simplifying repeatable positioning. For applications where multiple part formats are processed, modularity minimises downtime and streamlines fixture management. Precision that reduces rework and saves time Designed for accurate positioning, the unit achieves accuracy 0.01 mm, which helps to meet tight tolerances on small to medium components. Its compact vertical profile of 103 mm and a mass of 19 kg contribute to a low centre of gravity and secure mounting, supporting high‑precision setups without excessive bulk. As a result, less manual rework is required and cycle time consistency is improved in serial production. Robust build for workshop environments The vice is a hydraulic machine vice built from durable materials suited to industrial use. The solid construction and clean hydraulic actuation reduce maintenance points compared with purely mechanical clamping systems. Where consistent clamping force and long‑term stability are priorities, this clamping unit provides a balance of durability and predictable performance that fits machine shops and jobbing environments alike. Contact Metav Werkzeuge to assess how the Vertex VNC-100FV hydraulic vice with 20 kN clamping force can be integrated into production fixtures and machining cells Technical Data Article number: VNC-100FV GTIN: 4061905083235 Manufacturer: Vertex Machinery Works Co., Ltd. Numbers / Core Technical Data Clamping force: 20 kN Accuracy: 0.01 mm Weight: 19 kg Height: 103 mm Dimensions: 100×150 mm; 100×228 mm ECLASS: 21020601 ETIM: EC002173 Special features / Design Material: Cast iron Type: Hydraulic Modular design SKU: VNC-100FV Brand: Vertex FAQ What clamping force does this vice provide? The vice delivers a rated clamping force of 20 kN; the Vertex VNC-100FV uses hydraulic actuation to apply that force consistently for secure machining. Is the vice suitable for different workpiece sizes? Yes, the modular design and available table sizes (100×150 mm and 100×228 mm) make the vice adaptable to varied part dimensions and fixture layouts. What level of precision can be expected with this clamping unit? The product achieves an accuracy of 0.01 mm, enabling precise positioning and reduced rework when used in repeatable machining processes. Which material is the vice made from and why does it matter? Constructed from cast iron, the vice offers rigidity and vibration damping, qualities that support stable cutting conditions and longer tool life when machining. Is the vice intended for manual or automated machines? The hydraulic design of the VNC-100FV is suited to machine shop integration, including automated or CNC setups that benefit from repeatable, remote‑actuated clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of high positional accuracy and robust load capacity—ideal for repeatable setups and precise machining tasks; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. VCT-407 Precision Cross Slide Table by Vertex — 100 x 180 mm table, 35 kg load The VCT-407 is a precision cross slide table engineered for accurate positioning in machine shops and inspection rigs, designed to support small fixtures and measuring tasks with reliable repeatability. Compact 100 x 180 mm working table High positioning accuracy 0.02 mm 35 kg maximum load capacity T-slot 3/8 inch for secure fixturing Repeatable positioning for precise results The cross slide is built to deliver consistent positioning: with a specified positioning accuracy of 0.02 mm, the unit reduces setup variability and shortens inspection cycles. The working surface of 100 x 180 mm allows for controlled movement across two axes while maintaining alignment; this is beneficial where sub-millimetre tolerances are required. The mechanism is designed to translate manual adjustments into accurate linear displacement, so measuring and machining tasks proceed with predictable outcomes and fewer reworks. Sturdy construction that supports demanding setups A focus on durability ensures that the table copes with everyday workshop stresses. The assembly provides a maximum load of 35 kg while keeping a modest overall weight of 12 kg, balancing portability and stability. This combination allows the unit to be mounted on benches or integrated into small machine stations without excessive support structures. The design minimises deflection under load, which maintains positional accuracy during clamping and operation and supports reliable process control in production and measurement environments. Secure fixturing and straightforward integration The integrated T-slot 3/8 inch on the top plate simplifies fixture attachment and repeatable clamping, enabling direct mounting of vices, probes or small tooling plates. The cross slide’s layout supports modular fixturing concepts commonly used in quality control and light machining, making it easier to interchange setups while preserving datum references. The product’s configuration reduces setup time and helps maintain consistent datum points between jobs, which improves throughput and traceability in batch processes. Practical handling and maintenance for workshop use Operation and upkeep are uncomplicated: the unit’s dimensions and mechanical design favour quick cleaning and periodic lubrication routines without the need for specialised tools. For workshops upgrading their measuring or positioning capabilities, the table integrates with standard clamping hardware and measuring devices, providing a pragmatic path to finer control. The compact footprint and mechanical simplicity make the table a pragmatic choice where space is limited but precision remains essential. Contact Metav Werkzeuge in Emmerich for a detailed application consultation on the Vertex VCT-407; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fixturing and delivery options Technical Data Article number: VCT-407 Manufacturer: Vertex GTIN: 4061905083327 Facts Table size: 100 x 180 mm Base size: 100 x 130 mm Positioning accuracy: 0.02 mm Weight: 12 kg Maximum load: 35 kg T-slot: 3/8 inch Special features Precision cross slide table design T-slot for secure clamping Compact footprint for bench or machine integration FAQ What level of accuracy can be expected from this cross slide table? The VCT-407 provides a positioning accuracy of 0.02 mm, suitable for precision measuring and light machining tasks where sub-millimetre repeatability is required. What is the maximum load the table can support? The unit is specified for a maximum load of 35 kg, allowing secure mounting of small fixtures and measuring devices without significant loss of positional stability. Which table and base dimensions are available for mounting space planning? The working plate measures 100 x 180 mm and the base footprint is 100 x 130 mm, making the table suitable for compact benches and integration into inspection rigs. How does the T-slot support fixturing? The T-slot 3/8 inch on the top surface accommodates standard clamping hardware, enabling repeatable and secure attachment of vices, tooling plates or probes. Is the VCT-407 suitable for integration with measuring equipment? Yes, the precision cross slide layout and compact dimensions make the VCT-407 compatible with common inspection setups and measuring instruments where controlled two-axis movement is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a compact footprint, precise axial drive and smooth jaws for controlled, damage-free clamping; order the accessory directly via Metav Werkzeuge or consult the team for compatibility advice. VNC-4AD Axial drive with smooth jaws for VNC-FV (Vertex) The VNC-4AD is an axial-drive clamping accessory with smooth jaws, designed to deliver concentric, damage-free holding for chucks and fixtures in turning and light-duty workshop applications. Axial drive for uniform clamping Smooth jaws for delicate components Compatible with VNC-FV chucks Compact dimensions 98x76x45 mm Consistent concentric clamping for repeatable workflows The axial-drive mechanism provides a controlled, axial movement of the jaws that supports concentric clamping without complex adjustments. This approach reduces runout variability during turning operations, which translates into fewer reworks and more predictable cycle times. For workshops seeking to optimise throughput, the axial drive is a practical method to maintain part accuracy while keeping set-up effort low. Safe, non-marking gripping for finished surfaces The set of smooth jaws is intended for applications where surface integrity matters, such as finishing, assembly fixturing or machining of pre-finished components. Smooth contacting faces distribute clamping load and lower the risk of imprinting or marring, allowing delicate workpieces to be held securely. The result is improved part presentation and reduced post-process handling. Designed for compact installation and easy integration With compact dimensions of 98x76x45 mm and a mass of 1.57 kg, the unit fits into constrained setups and can be incorporated into existing fixtures or chucks without significant rework. The accessory is purpose-built for the VNC-FV chuck family and facilitates rapid retrofitting; technical teams benefit from straightforward mechanical compatibility rather than time-consuming adaptations. Practical notes on use and benefits The axial-drive and smooth-jaw combination is particularly suitable where a balance between precision and gentle part handling is required. For operators unfamiliar with axial clamping, the principle is simple: axial movement converts into uniform jaw action, maintaining grip while mitigating radial distortion. This makes the device a pragmatic choice for mixed-production workshops and precision maintenance shops that demand reliable results with minimal setup complexity. Contact Metav Werkzeuge for a tailored compatibility check and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav’s consultants will advise on the VNC-4AD and suitable clamping configurations Technical data Article number: VNC-4AD GTIN: 4061905084423 eClass: 21130302 Facts Dimensions: 98x76x45 mm Weight: 1.57 kg Special features Axial drive Smooth jaws Compatible with VNC-FV Image available: vnc-4ad-detail.jpg FAQ What is the primary function of this accessory? The VNC-4AD provides an axial-drive solution with smooth jaws to enable concentric, non-marking clamping for VNC-FV chucks. Can the smooth jaws hold delicate components without damage? Yes, the smooth jaws fitted to the VNC-4AD are intended to distribute clamping force and reduce the risk of surface damage on finished or delicate parts. Will the unit fit existing VNC-FV chucks directly? The VNC-4AD is designed for compatibility with the VNC-FV series; specific mounting details should be checked against the chuck variant to ensure exact fit. What are the physical dimensions and weight of the accessory? The accessory measures 98x76x45 mm and weighs 1.57 kg, offering a compact form factor suitable for constrained installations. How does the axial drive improve machining results? By converting axial motion into uniform jaw closure, the axial drive enhances concentric clamping and reduces runout variability, helping to produce more repeatable machining outcomes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision positioning, a compact footprint and industrial stability to streamline repetitive clamping tasks. Order the component directly via Metav Werkzeuge or consult our specialists for application-specific advice. VQC-100FPF L-stop — Vertex compact stop for VQC vises, 100×49×37 mm VQC-100FPF L-stop is a compact precision stop designed for use with VQC vises, enabling repeatable part location and reliable clamping in workshop and light-production environments. Precision stop for VQC vises Compact 100×49×37 mm footprint Robust construction, 0.81 kg mass Ideal for repeatable positioning tasks Reduce setup time with precise, repeatable positioning The L-stop delivers consistent reference positioning for fixtures and workpieces, reducing downtime between consecutive operations. Fitted to compatible VQC vises, the stop creates a defined datum that simplifies alignment and accelerates set-up, which is especially valuable for small-batch production and precision workshop tasks. The compact design minimises interference with toolpaths while still providing a stable reference for machining or inspection operations. By converting ad hoc jigs into a repeatable stop, the L-stop contributes to process reliability and measurably shorter cycle preparation. Space-saving design that improves stability on the bench With a compact footprint of 100 × 49 × 37 mm and a mass of 0.81 kg, the component balances low spatial impact with sufficient mass to resist shifting under light clamping forces. The geometry supports secure contact without occupying excessive vice throat space, allowing multiple fixtures or stops to be used on the same vice when required. The small footprint is particularly advantageous in confined set-ups or on crowded benches, where maintaining access to the workpiece and tools is essential. Where a predictable stop surface is needed, this L-stop offers durable physical support for accurate, repeatable operations. Straightforward integration for workshop workflows Engineered as an accessory for VQC vises, the product installs quickly into existing clamping arrangements and functions as a straightforward mechanical datum. The clear technical drawing supplied with the item assists with planning and confirms fitment dimensions for custom jigs and fixtures. For users with modest metrology needs, the stop is a pragmatic alternative to bespoke fixtures: it reduces complexity while increasing repeatability. The design supports routine maintenance and inspection routines, and its compatibility with standard vice interfaces keeps implementation time to a minimum, helping teams focus on production rather than fixturing. For application advice or to request a quotation for the Vertex VQC-100FPF, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271 — our team will advise on fitment and availability Technical data Article number: VQC-100FPF GTIN: 4061905083228 Manufacturer: Vertex ECLASS: 21029210 Facts Dimensions: 100 x 49 x 37 mm Weight: 0.81 kg Special features L-stop for VQC vises Compact design for repeatable positioning Technical drawing available in product images FAQ Is this stop compatible with all VQC vises? Compatibility is intended for VQC vises; the VQC-100FPF is designed to fit the standard interfaces used on Vertex VQC vice models and similar clamping systems. What are the exact dimensions and weight of the stop? The stop measures 100 × 49 × 37 mm and weighs 0.81 kg, providing a compact, stable reference for bench and light-production tasks. Can the L-stop be used for repeatable production runs? Yes, the L-stop creates a defined datum for repeatable positioning, making it suitable for small-batch production and frequent changeovers where consistent part location is required. Is a technical drawing available to check fitment? A technical drawing is provided with the product images to assist with measurement checks and integration into existing fixtures. Is the component suitable for heavy-duty machining? The L-stop is intended for workshop and light-production applications where the dimensions and mass provide stability; for heavy-duty machining, suitability should be assessed against the specific clamping forces involved Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high clamping force, compact footprint and robust construction for consistent workholding. Benefit from the adjustable design and included mounting bolts to reduce setup time. Order the FV-350 adjustable chuck jaws directly via Metav Werkzeuge or ask our consultants if needed. FV-350 Adjustable Chuck Jaws by Vertex — 900 kgf clamping force, compact size the FV-350 adjustable chuck jaws provide a versatile clamping solution for workshop and industrial setups, designed for reliable holding of medium to large workpieces 900 kgf clamping force for secure workholding Adjustable design for versatile clamping setups Compact dimensions: 75×67×150 mm Includes two M12x75L and two M12x125L Consistent high-force clamping for repeatable results The jaws deliver a rated 900 kgf clamping force, which translates into stable fixation during machining and grinding processes and reduces the risk of workpiece movement. The high clamping force is particularly valuable where precise tolerances matter: it minimises vibration and supports repeatable results across batches. With a mass of 7.5 kg, the device provides inherent stability on the chuck, improving overall machining accuracy without the need for additional mass. These characteristics make the component a dependable element in production workflows that demand consistent performance. Quick set-up and adaptable holding options Designed as an adjustable clamping system, the jaws allow quick repositioning and fine adjustment to match varied part geometries, cutting down non-productive time between jobs. The inclusion of mounting hardware — M12x75L and M12x125L bolts — means the unit can be fitted with standard tooling fixtures immediately, simplifying integration into existing chucks and fixtures. The compact footprint of 75 × 67 × 150 mm supports use in constrained setups where space is limited, while still offering sufficient bite depth for secure gripping. This combination of adaptability and fast mounting improves throughput and reduces setup complexity. Robust design and practical accessories for workshop use Manufactured for industrial use, the workholding jaws feature a construction aimed at durability and dependable service life under regular load cycles. The set comes complete with the specified fastening bolts, enabling straightforward installation and replacement of jaws when required. The product’s chuck jaws design focuses on practical usability: clear mechanical interfaces and standardised mounting reduce the need for special tools. Where predictable clamping and minimal rework are priorities, this workholding solution supports efficient processes and lowers the likelihood of downtime caused by insufficient gripping performance. For tailored advice or to request fast dispatch from Metav Werkzeuge in Emmerich, contact our specialists today by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge supports precise procurement and reliable delivery across Europe Technical data Article number: FV-350 GTIN: 4061905084393 Eclass: 21029107 Facts Dimensions: 75 × 67 × 150 mm Weight: 7.5 kg Clamping force: 900 kgf Special features Adjustable chuck jaws Accessories included: 2x M12x75L, 2x M12x125L Manufacturer brand: Vertex FAQ What clamping force can be expected from these jaws? The FV-350 adjustable chuck jaws provide a rated clamping force of 900 kgf, ensuring secure fixation for machining and grinding operations. Are mounting bolts supplied with the jaws? Yes. The delivery includes two M12x75L and two M12x125L bolts for immediate installation. What are the overall dimensions and weight of the unit? The jaws measure 75 × 67 × 150 mm and weigh 7.5 kg, offering a compact yet stable workholding solution. Can these jaws be adjusted for different part geometries? The adjustable design of the FV-350 allows fine repositioning to match a variety of workpiece shapes and sizes, reducing set-up time. Is the FV-350 suitable for industrial production environments? Yes. The construction and clamping capacity of the FV-350 make it suitable for repeated use in workshop and industrial settings where reliable workholding is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precision and robust construction to secure repeatable right-angle setups on the shop bench; the combination of 0.01 mm accuracy and high-strength cast steel ensures long-term stability and reliable measurement references. Order via Metav Werkzeuge or consult our specialists for fast delivery and tailored advice. VRH-4 Angle Plate by Vertex — high-strength cast steel, 102 x 126 x 150 mm VRH-4 is a precision angle plate designed to provide stable, perpendicular reference surfaces for inspection and setup tasks in metalworking and toolrooms. High-strength cast steel construction Accuracy 0.01 mm for precise alignment Compact footprint 102 x 126 x 150 mm Stable 6.3 kg mass reduces vibration Reliable right-angle reference that keeps setups consistent The VRH-4 angle plate delivers repeatable alignment thanks to its declared 0.01 mm accuracy, which corresponds to tight tolerances required in inspection and fine machining tasks. A reference plate with this level of precision reduces the need for repeated adjustments and re-measurements, improving throughput and lowering the risk of scrap. The measured flatness and perpendicularity act as an objective baseline for calibrations and setup procedures, so fewer process checks are necessary and machine time can be used more efficiently. Durable construction for a stable working base Manufactured from high-strength cast steel, the fixture is engineered to resist deformation under typical bench use. The substantial 6.3 kg mass dampens minor vibrations and helps maintain contact stability during measuring or marking operations. This robustness supports consistent results over time and reduces the impact of incidental knocks or tool contact, contributing to a longer service life and lower maintenance needs compared with lighter, less rigid alternatives. Space-conscious design for versatile bench use With an overall size of 102 x 126 x 150 mm, the unit occupies a compact footprint while still offering sufficiently broad faces for clamping, scribing and inspection. The geometry makes it suitable for constrained workbenches and allows multiple fixtures to be used together when larger assemblies require square references. The compact dimensions also simplify storage and transport within a busy workshop, enabling rapid reconfiguration of workspaces without compromising accuracy. Integrates easily into quality workflows As a stable perpendicular reference, the angle plate helps streamline common processes such as layout, inspection and component set-up. The solid construction and precise surfaces reduce the number of verification steps required during a production run, supporting faster changeovers and consistent part quality. Documentation and inspection protocols benefit from a measurable baseline, and the component's build quality aligns with standard shop metrology practices for dependable results. Contact Metav Werkzeuge for a tailored recommendation on the Vertex VRH-4 angle plate and secure fast delivery from our Emmerich warehouse Technical data SKU: VRH-4 GTIN: 4061905085031 EClass: 21170130 Manufacturer: Vertex Core specifications Dimensions: 102 x 126 x 150 mm Weight: 6.3 kg Accuracy: 0.01 mm Materials & images Material: high-strength cast steel Images: VRH-4-main.png, VRH-4-detail.png FAQ What tolerance can be expected from the VRH-4 angle plate? The Vertex VRH-4 angle plate is specified with an accuracy of 0.01 mm, providing a reliable tolerance reference for inspection and setup tasks. Is the VRH-4 suitable for use on a regular workshop bench? Yes, the VRH-4 angle plate's compact footprint (102 x 126 x 150 mm) and 6.3 kg mass make it appropriate for standard benches while offering stable support for measuring operations. What material is the angle plate made from and why does that matter? The component is made from high-strength cast steel, which gives the plate dimensional stability and resistance to deformation, ensuring consistent perpendicular reference surfaces over prolonged use. Can the VRH-4 be combined with other fixtures for larger workpieces? The VRH-4 is designed as a modular reference element; multiple plates can be arranged together on the bench to create larger fixturing setups while maintaining precise right-angle references. Who manufactures the VRH-4? The VRH-4 is produced by Vertex and supplied with details suitable for integration into professional metrology and setup workflows Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan