Ausstattungen für Fräsmaschinen

Combine compact size, consistent accuracy and robust material for dependable workholding in inspection and set-up operations. Use the compact dimensions and measured repeatability to streamline fixture routines; order directly from Metav or request a technical consultation for complex applications. Prism Block Vertex A Prism Block Vertex designed as a compact support for precise measurement and stable workpiece seating in workshop and inspection environments. Prism Block by Vertex for precise workholding Fine-grained cast iron construction for stability Compact footprint: 27 x 50 x 32 mm High repeatability with 0.05 listed accuracy Lightweight at 0.5 kg for easy handling Stable reference for measurements and set-ups Built from fine-grained cast iron, this prism block provides a vibration-damping base that helps preserve reference positions during measurement and inspection tasks. The combination of material and geometry reduces micro-movements, so datum lines and contact points stay consistent — an advantage when repeatability matters in machining or quality control. The listed accuracy of 0.05 underlines suitability for workshop-grade metrology and fixture work. Compact format for versatile workshop use With a small footprint of 27 x 50 x 32 mm and a weight of 0.5 kg, the prism block fits easily into measurement benches, jigs and vice set-ups. Its size makes it simple to position or clamp without occupying space that could interfere with other tools. The compact format also supports mobile inspection workflows where quick re-location of fixtures is required. Durable construction that supports everyday handling The choice of fine-grained cast iron offers wear resistance and dimensional stability over long service cycles. That material resists surface deformation from repeated contact and provides thermal mass that moderates short-term temperature swings during shop processes. As a result, the component maintains its profile and contact integrity, extending usable life and reducing rework. Who benefits from this prism block Professional machinists, toolmakers and quality inspectors will find the Prism Block Vertex particularly useful for routine set-ups, repeat checks and small-part inspection. Its balance of portability and accuracy suits both bench-top laboratories and on-machine verification tasks. Hobby engineers who require reliable reference points for precision projects will also find it practical. Choose the Vertex Prism Block V-2V from Metav for consistent, workshop-ready precision — order through Metav or request advice by eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Product details SKU: V-2V Manufacturer: Vertex Material: Fine-grained cast iron Dimensions: 27x50x32mm Weight: 0.5 kg Accuracy: 0.05 Facts Dimensions: 27x50x32mm Weight: 0.5 kg Accuracy: 0.05 Features Material: Fine-grained cast iron Application: Workholding / Measurement support Use case: Bench and inspection setups FAQ What is the primary use of this prism block? The Prism Block Vertex serves as a stable support and reference for measurement, inspection and workpiece seating in machining or quality-control environments; its compact form makes it suited to bench-top and on-machine checks. Is the material suitable for heavy-duty shop use? Yes, the fine-grained cast iron construction of the Prism Block Vertex provides wear resistance and damping characteristics appropriate for regular shop handling and fixture work. How precise is the Prism Block Vertex in practical terms? The unit is specified with an accuracy of 0.05, indicating tight repeatability for workshop metrology and reliable reference performance during routine set-ups. Can the Prism Block Vertex be easily repositioned on a vice or jig? Its compact dimensions (27 x 50 x 32 mm) and weight (0.5 kg) allow for straightforward handling and quick repositioning on vices, jigs or measurement fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact support with a 107 mm centre height and a 134 x 94 mm base gives steady workpiece support while keeping the workshop layout efficient. The robust 4 kg construction ensures stability during turning operations. Order the tailstock directly via Metav Werkzeuge or consult our technical team for compatibility advice. Reitstock – Tailstock for BS lathes, 107 mm centre height (Vertex) A Reitstock designed as a tailstock for BS lathes, providing steady axial support for workpieces during turning and light metalworking tasks. Compact 134 x 94 mm base footprint 107 mm centre height for small lathes Robust 4 kg construction for stability Designed for BS lathe series Steady support that improves machining quality The principal role of a tailstock is to provide axial support and reduce deflection during turning; this results in improved surface finish and tighter tolerances. With a centre height of 107 mm, the support point aligns the workpiece concentric to the spindle axis on many compact and benchtop lathes. By stabilising long or slender components during machining, the support device reduces chatter and repeat operations, which translates into fewer rejects and a more efficient production flow. The function is straightforward but essential: steady support yields consistent results. Space-saving footprint eases integration into workshops A base footprint of 134 x 94 mm keeps the unit compact and simple to position on smaller lathe beds where space is at a premium. The modest footprint combined with a robust 4 kg mass helps balance two competing needs: minimal intrusion on the work envelope and sufficient mass for damping vibrations. For workshops that prioritise flexible layout and quick changeovers, the compact design makes the tailstock easy to mount, reposition and store without compromising on the stability required for quality turning operations. Durable assembly built for routine workshop use Designed for regular use in machining tasks, the tailstock is engineered to deliver dependable support across a range of routine turning operations. The relatively low weight contributes to handling ease during setup, while the solid build supports ongoing production demands. Integration into existing equipment is simplified by its dedicated fit for the BS lathe series, enabling predictable behaviour in serial or small-batch manufacturing. The result is a pragmatic addition to any workshop seeking consistent, repeatable workholding without unnecessary complexity. Choose the Vertex tailstock for reliable workpiece support and order through Metav Werkzeuge in Emmerich for fast dispatch and specialist advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BS-0-TS GTIN: 4061905084232 Manufacturer: Vertex Machinery Works Co., Ltd. ECLASS: 36600102 Facts Centre height: 107 mm Base footprint: 134 x 94 mm Weight: 4 kg Special features Suitable for BS lathe series Product type: tailstock Fast dispatch indicated in shop description FAQ Is this tailstock compatible with BS lathes? The Reitstock is specified for the BS lathe series; compatibility depends on bed width and mounting arrangement—refer to the centre height and base footprint for verification. What is the centre height and why is it important? Centre height is 107 mm; it determines how the workpiece axis aligns with the spindle and directly affects concentricity and finish quality during turning. What mounting space is required on the lathe bed? The base footprint is 134 x 94 mm; ensure the lathe bed provides sufficient flat area and clearance for secure placement and any required clamps. How does the tailstock affect machining results? By providing axial support and damping, the tailstock reduces deflection and vibration, which improves surface finish and dimensional repeatability. Is the mass of the unit relevant for stability? At 4 kg, the construction contributes to stability and vibration damping while remaining manageable for positioning and setup. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a 6 mm slot profile with a stable 0.56 kg mass and a 210 mm length delivers steady, repeatable slotting performance for production environments; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. VSH-6C slot bar accessory by Vertex — 6 mm precision fit, 210 mm length A VSH-6C accessory designed for precision slotting heads, providing a compact 6 mm slot profile for repeatable slotting and secure mechanical integration. Precision 6 mm slot bar Robust 0.56 kg construction Compatible with Vertex slotting heads Consistent slotting accuracy for dependable results The accessory supports precision slotting workflows by providing a defined 6 mm guided profile that stabilises the cutting interface. Fitted to a precision slotting head, the component reduces lateral play and helps maintain alignment across repetitive cycles. This results in fewer rework operations and improved first-pass yield, which is especially relevant in small-batch production and precision workshops. The design emphasises dimensional control, so tolerances are upheld even under frequent use, supporting higher throughput with consistent quality. Built for mechanical stability and straightforward integration Mechanical stability is achieved through a compact but substantial form factor; the 0.56 kg mass and 210 mm length balance rigidity with accessibility for typical machining set-ups. The bar is intended to be mounted to precision slotting heads where secure engagement and repeatability are essential. Installation is performed using standard fastening methods, so integration into existing toolheads is straightforward and setup times are reduced. The component’s form factor minimises vibration transfer and contributes to predictable tool behaviour, aiding in cycle-time optimisation and reducing maintenance intervals. Improved inventory control and production reliability As a standardised accessory with a clear SKU and GTIN, the unit simplifies spare-part management and procurement planning. The standardisation supports structured inventory policies and reduces machine downtime by enabling quick replacements. For workshops and production lines aiming to maintain uninterrupted operations, adopting uniform accessories enhances traceability and ensures compatibility across multiple machines. The measured, repeatable performance contributes to process reliability and supports a more efficient production flow. For secure procurement of Vertex precision accessories such as the VSH-6C, rely on Metav Werkzeuge in Emmerich for expert advice and reliable dispatch to keep production running smoothly. Technical data Article number: VSH-6C GTIN: 4061905084713 Manufacturer: Vertex Facts Weight: 0.56 kg Length: 210 mm Slot width: 6 mm Special features Accessory for precision slotting head Category: Accessory SKU: VSH-6C Brand: Vertex FAQ What is the intended application of this accessory? The VSH-6C is an accessory intended for use with precision slotting heads to provide a defined 6 mm slot profile for repeatable slotting operations. What are the key dimensions and weight? The component measures 210 mm in length, has a slot width of 6 mm and a weight of 0.56 kg as specified for the VSH-6C accessory by Vertex. Is the accessory compatible with Vertex precision slotting heads? Yes, the design of the VSH-6C matches Vertex precision slotting head interfaces and is intended to ensure secure compatibility and repeatable mounting. Which identifiers should be used for ordering and stock control? Use the SKU VSH-6C and GTIN 4061905084713 for clear identification and inventory tracking of this Vertex slot bar accessory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of adjustable height, compact footprint and reliable load capacity to streamline assembly and fixture tasks. Order the screw jack directly via Metav Werkzeuge or ask our consultants if needed. VSJ-40 Screw Jack by Vertex — adjustable height 40–50 mm, 30 kg load The VSJ-40 Screw Jack is a compact mechanical lifting device designed for fine height adjustment in workshop and assembly environments, suitable where precise, repeatable elevation control is required. Adjustable height 40–50 mm Rated load 30 kg Diameter 40 mm compact footprint Lightweight at 0.3 kg Precise height control for repeatable setups The VSJ-40 offers precision adjustment through a screw mechanism that converts rotary input into reliable linear movement. With an adjustable height range of 40–50 mm, the device enables small, accurate corrections in fixtures and sub-assemblies without the need for complex machinery. The clear measurable parameters, including a 30 kg rated load and diameter 40 mm, provide a decisive basis for selecting an appropriate lifting element for light-duty tasks, allowing planners to compare requirements objectively and avoid costly overspecification. Compact, low-mass design for versatile placement A compact design and low weight (0.3 kg) make this lifting element straightforward to integrate into constrained workspaces and portable assemblies. The reduced mass eases manual handling during setup and repositioning while minimising additional load on support structures. For workshop environments and small-scale production, the combination of a small footprint and robust rated capacity positions this unit as an efficient solution for precision levelling and temporary support, balancing ease of use with engineering suitability. Simple function, clear benefits for assembly workflows The screw-drive principle delivers controlled, backlash-minimised movement for fine levelling and height compensation. This mechanical simplicity translates into low maintenance requirements and predictable behaviour over many cycles, contributing to consistent process outcomes. Supplied under the Vertex brand, the unit is documented with essential identifiers and measurements that facilitate procurement and integration into bills of materials, enabling efficient stock management and clear specification communication across teams. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex VSJ-40 screw jack and to arrange supply through our quality-filtered distribution network. Technical Data Article number: VSJ-40 GTIN: 4061905084805 Manufacturer: Vertex Facts Diameter: 40 mm Adjustable height: 40–50 mm Max load: 30 kg Weight: 0.3 kg eClass: 21044290 Special features Screw-drive for precise linear adjustment Compact footprint for constrained spaces Lightweight construction for easy handling Suited to workshop and assembly tasks FAQ What maximum load can the screw jack handle? The VSJ-40 screw jack is rated for a 30 kg maximum load as specified by Vertex. What is the adjustable height range of this lifting element? Adjustment is possible between 40–50 mm, allowing fine corrections in setup and alignment. Is the unit suitable for tight installation spaces? Yes, the 40 mm diameter and compact design make it appropriate for constrained work areas and fixtures. How much does the screw jack weigh? The device has a weight of approximately 0.3 kg, facilitating manual handling and repositioning. Which applications are typical for this screw jack? Typical uses include fine levelling, fixture height compensation and small assembly adjustments where repeatable, precise elevation control is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high-strength cast steel, ±0.01 mm accuracy and compact dimensions for reliable, repeatable fixturing in inspection and small-batch machining. Order the component directly via Metav Werkzeuge or consult our specialists for application support. VR-6 angle plate — Vertex precision workholding with high-strength cast steel and 0.01 mm accuracy The VR-6 angle plate is a compact, robust fixturing element designed for precision workholding in inspection benches and machine tables, offering stable positioning for small components and measurement setups. High-strength cast steel construction Precision accuracy ±0.01 mm Compact dimensions 150 x 115 x 126 mm Solid 3.8 kg for vibration damping Reliable alignment that preserves measuring certainty The angle fixture delivers consistent positional accuracy thanks to its ±0.01 mm accuracy, a level of precision that supports repeatable measurements and tight-tolerance machining. Built from high-strength cast steel, the unit combines material rigidity with thermal stability so that reference faces retain alignment during routine use. For workshops that perform frequent inspection cycles, the precise tolerances reduce the need for repeated realignment and streamline the measurement workflow. Technical features such as machined reference surfaces ensure compatibility with calibrated gauges and standard clamping hardware while preserving surface quality over many cycles. Mass and compactness that improve setup efficiency With external dimensions of 150 x 115 x 126 mm and a mass of 3.8 kg, the angle plate offers a balance between portability and stability. The unit’s weight increases contact pressure on the machine table or inspection plate, improving vibration damping and reducing chatter during manual positioning. Its compact footprint makes it suitable for smaller benches and tight fixtures, while the solid construction simplifies clamping arrangements and minimises the need for auxiliary supports. The compact design therefore shortens set-up time and supports efficient batch inspection without sacrificing the mechanical stability required for precision work. Practical design for workshop integration and longevity The component has been manufactured to integrate easily into existing workflows: machined datum faces are ready for immediate clamping and the robust casting resists deformation during normal workshop handling. The robust workholding nature of the plate makes it suitable for both inspection and light machining tasks where precise angular positioning is required. Minimal routine maintenance—cleaning and protection against heavy impact—keeps the part serviceable for years. Metav’s presence in Emmerich acts as a local quality filter for the European market, pairing product availability with technical advice so that selection matches the application and production requirements. Contact Metav Werkzeuge today for tailored application advice or to secure the Vertex VR-6 angle plate for precision fixturing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VR-6 GTIN: 4061905084041 ECLASS: 21020601 Core specifications Dimensions: 150 x 115 x 126 mm Accuracy: 0.01 mm Weight: 3.8 kg Materials & features Material: high-strength cast steel Machined reference faces for precise positioning Compact, robust design for inspection and light machining FAQ What positional tolerance does the angle plate provide? The Vertex VR-6 angle plate guarantees an accuracy of ±0.01 mm, making the component suitable for precision measurement and fixture tasks where tight tolerances are required. What is the plate made from and why does that matter? The unit is manufactured from high-strength cast steel, which provides rigidity and good vibration damping, ensuring stable reference faces during inspection and machining operations. For which workshop tasks is this angle plate best suited? The angle plate is suitable for inspection benches, small machine tables and jigs where precise right-angle fixturing and stable workholding are necessary. How should the component be maintained to ensure longevity? Routine maintenance for the VR-6 angle plate consists of keeping machined surfaces clean, avoiding severe impacts and storing the piece in a dry environment to preserve accuracy and surface condition. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of compact design, compatibility with standard clamping pins and fast fixture set-up for reliable machining results. Benefit from Vertex quality and secure your components through Metav Werkzeuge or consult our specialists for application advice. Step Clamp Vertex – Compact clamp for t-slot 11 mm, M8/M10 compatible Step Clamp designed for modular fixturing in milling and drilling applications, compatible with 11 mm t-slots and standard M8 or M10 clamping pins. Compact step clamp for t-slot 11 mm Compatible with M8 or M10 clamping pins Lightweight construction, approx 0.11 kg Precision-made by Vertex for repeatability Faster set-ups thanks to compact, standard-compatible design The Step Clamp delivers a practical balance between size and functionality. With a t-slot 11 mm compatibility and support for M8 or M10 pins, the component integrates directly into common clamping rails and fixture plates, reducing the need for bespoke adaptors. The compact footprint (25 x 64 x 12 mm) and low mass (0.11 kg) allow quicker repositioning and minimise inertia during manual handling. This translates into shorter set-up times and fewer interruptions on the shop floor, supporting a smoother production flow. Reliable clamping and repeatable results for serial work Manufactured by Vertex, the clamp is engineered to provide secure step-style positioning that helps maintain consistent workpiece height across batches. The step profile enables defined vertical adjustment without incremental shimming, which improves repeatability and reduces the potential for setup error. For workshop environments where small tolerances and steady throughput are required, the clamp’s straightforward mechanical function contributes directly to process reliability and reduced rework. Practical inventory and integration benefits for busy workshops The compact dimensions and compatibility with standard clamping bolts simplify stock management and fixture planning. Keeping a set of these clamps reduces the variety of specialised clamps required, enabling flexible fixture builds with fewer individual parts. Supplied as a single, ready-to-install element (SKU 6113), the component fits into modular fixturing systems and is particularly suited to small to medium-sized milling and drilling operations that favour rapid changeovers and lean inventory. Contact Metav Werkzeuge to secure Vertex clamping components for precise fixturing and request tailored application advice from our consultants in Emmerich Technical data Article number: 6113 GTIN: 4061905084027 Brand: Vertex Dimensions: 25 x 64 x 12 mm Weight: 0.11 kg T-slot compatibility: 11 mm Compatible with M8 or M10 clamping pins Compact step profile for vertical adjustment Suitable for modular fixture systems FAQ What t-slot size does the clamp fit? The clamp is designed for an 11 mm t-slot and integrates with standard 11 mm rails. Which clamping bolts are compatible with this clamp? Compatible clamping bolts are M8 or M10; the clamp accepts both sizes for flexible fixture design. What are the dimensions and its impact on fixture layout? Dimensions are 25 x 64 x 12 mm, allowing compact placement and close packing on fixture plates where space is limited. Is the clamp supplied ready to install? The component (SKU 6113) is supplied as a ready-to-install clamp for immediate integration into modular systems. How does the clamp support repeatability in serial production? The step profile provides defined vertical positioning that reduces the need for shims, which helps maintain consistent workpiece heights across multiple set-ups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust, dust-protected halogen illumination and flexible multi-voltage operation for dependable workshop lighting; the compact articulated arm and included 1.8 m cable simplify installation and ensure stable positioning. Order the lamp directly via Metav Werkzeuge or ask our consultants for application advice. VHL-300L Halogen Lamp — Dust-protected head, multi-voltage options by Vertex The VHL-300L is a dust-protected halogen lamp engineered for reliable, high-intensity workshop and inspection lighting, combining a sealed lamp head with a stable articulated arm for precise positioning Dust-protected halogen light source IP67-sealed lamp head, arm IP20 Multi-voltage operation 24–380 V Delivered with 1.8 m power cable Reliable illumination for demanding workshop tasks The VHL-300L delivers concentrated, high-contrast light thanks to a 55 W halogen bulb, providing consistent colour rendering for inspection, assembly and detail work. The dust-protected head keeps the optic clear under dusty conditions, reducing maintenance intervals and preserving light output. With a compact yet stable articulation, the lamp supports repeatable positioning, so task lighting remains accurate across repetitive procedures — a clear advantage for workshops seeking dependable visual control during manufacturing or quality inspection. Installation flexibility across varied electrical systems Designed for varied workshop infrastructures, the lamp supports 110/220/380/24 V supply options, allowing integration without elaborate converters in many setups. The unit is supplied with a 1.8 m cable, which facilitates connection to nearby sockets or distribution points and speeds commissioning. These features reduce downtime and installation complexity while maintaining full operational power, enabling straightforward replacement or retrofit in benches, test stations or mobile rigs where adaptable voltage is essential. Built for durability and secure operation in workshop environments Protection ratings are arranged to safeguard key components: the lamp head is rated IP67, meaning it is dust-tight and protected against temporary immersion, while the articulated arm is rated IP20, preventing ingress of solid objects above 12 mm. The articulated arm measures 430 x 400 mm, delivering a practical reach and a mounting mass of 2.4 kg that contributes to mechanical stability. These characteristics combine to extend service life and support safe operation in typical industrial surroundings where particulate exposure or occasional splash risks are present. Choose the Vertex VHL-300L for robust, dust-protected illumination — contact Metav Werkzeuge for technical guidance and fast delivery from Emmerich. Technical data Article number: VHL-300L GTIN: 4061905083457 Manufacturer: Vertex Core specifications Weight: 2.4 kg Arm dimensions: 430 x 400 mm Bulb power: 55 W Cable length: 1.8 m Voltage options: 110/220/380/24 V Special features Dust-protected lamp head Lamp head protection: IP67 Arm protection: IP20 Supplied with power cable Suitable for workshop and inspection lighting FAQ What type of bulb does the VHL-300L use and is it included? The lamp uses a 55 W halogen bulb; the VHL-300L is supplied with the necessary power cable but replacement bulbs are not listed as included Can the VHL-300L be used in damp or dusty environments? The lamp head of the VHL-300L is IP67-rated for dust-tight protection and resistance to temporary immersion; the articulated arm is IP20, so it should be positioned to avoid direct water exposure to the arm Which voltages are supported by this lamp? This model supports 110/220/380/24 V, allowing connection to common industrial supplies without additional transformers in many configurations How long is the power cable supplied with the lamp? The VHL-300L is supplied with a 1.8 m power cable to facilitate straightforward connection to nearby outlets Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, reliable and easy to integrate: the combination of a 110 mm diameter table, an MT-2 spindle taper and robust T-slots delivers consistent indexing and secure clamping for small-batch machining. Order the HV-4 rotary table directly via Metav Werkzeuge or ask our consultants for specific integration advice. HV-4 Rotary Table (Horizontal/Vertical) — MT‑2 spindle, 110 mm diameter The HV-4 rotary table provides precise horizontal and vertical indexing for small milling and fabrication tasks, suited to bench machines and toolroom setups. Compact 110 mm diameter table, 72 mm height MT-2 spindle taper for direct tool mounting 4° indexing per spindle revolution T-slots 3×11 mm for secure clamping Accurate indexing for repeatable machining The dividing mechanism offers 4° indexing per spindle revolution combined with a fine 20" graduation reading, enabling repeatable angular positioning for drilling, milling and dividing operations. This mechanical resolution is translated into consistent part-to-part accuracy, reducing setup time and reducing rework. The design is particularly advantageous where cyclic angular steps are required and where digital encoders are unnecessary. Secure holding and flexible mounting options Equipped with an MT‑2 spindle taper and three T‑slots (3 × 11 mm), the table supports a range of clamping setups and direct accessory mounting. Rated for 35 kg horizontal and 18 kg vertical loads, the unit suits small workpieces and fixtures while maintaining secure contact during cutting. The compact footprint and moderate weight (7 kg) simplify handling and integration into limited-space machines without compromising stability. Space‑efficient design for workshop productivity With overall dimensions of 138 x 118 x 58 mm and a working diameter of 110 mm, the unit is engineered for tight toolrooms and small production cells. The horizontal/vertical orientation facility expands the range of applications, from indexed drilling to segmented milling, while the low mass aids quick repositioning and set-up changes. Durable construction and straightforward mechanics make the table a practical choice for shops seeking robust performance without complex electronics. For Vertex precision with trusted delivery from Metav Werkzeuge in Emmerich, speak with our team to evaluate the HV-4 for specific applications and fixture layouts Technical Data Article number: HV-4 GTIN: 4061905083266 ECLASS: 36600610 Facts Diameter: 110 mm Overall dimensions: 138 x 118 x 58 mm Height: 72 mm Weight: 7 kg Max load horizontal: 35 kg Max load vertical: 18 kg Index per spindle turn: 4° Graduation reading: 20" Special features Spindle taper: MT-2 T-slots: 3 × 11 mm Orientation: Horizontal / Vertical Brand: Vertex SKU: HV-4 FAQ What machining tasks is this rotary table suited for? The HV-4 rotary table from Vertex is designed for indexed drilling, segmented milling and small-batch dividing tasks where a compact, mechanically precise solution is required. How is work secured to the table? Workpieces and fixtures are clamped using the three T-slots (3 × 11 mm); the unit’s clamping interface and MT‑2 spindle taper enable direct mounting of accessories and secure fixation. What loads can be applied in each orientation? The table supports up to 35 kg horizontally and 18 kg vertically, making it suitable for small workpieces and toolroom fixtures without overloading the bearing system. Does the table support fine angular adjustments? Yes — the table indexes at 4° per spindle revolution and offers a 20" graduation reading for fine mechanical positioning suitable for repetitive angular steps. Is the HV-4 suitable for bench milling machines? Its compact dimensions (138 x 118 x 58 mm) and modest weight (7 kg) make the HV-4 appropriate for bench and small vertical milling machines where space and versatility are priorities. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, swivelable indexing solution with a 110 mm diameter and 4° positioning increments for repeatable angular set-ups; order the unit directly via Metav Werkzeuge or ask our consultants for tailored integration advice. Vertex VU-100 – Swivelable indexing rotary table, 110 mm working diameter The Vertex VU-100 is a compact indexing rotary table designed for precise angular positioning in small-part machining and fixture work. Swivelable indexing mechanism 110 mm working diameter 4° per spindle rotation Robust 13.5 kg base weight Accurate indexing that shortens set-up times The VU-100 delivers 4° indexing, which means each full spindle rotation moves the table by a defined angular increment, enabling reliable repeatability for series work. This indexing rotary table simplifies multi‑angle operations by removing the need for manual marking or frequent re‑clamping, translating into measurable time savings on set-up and consistent part quality. The mechanism is designed to provide stable angular stops that support fast changeovers in toolrooms and small production cells. Stable, compact footprint for workshop environments With a 110 mm diameter working face and compact external dimensions of 228 x 177 x 117 mm, the unit occupies minimal bench or machine table space while maintaining stability thanks to a 13.5 kg mass. The weight contributes to vibration damping and steadier cutting behaviour, which is particularly beneficial when machining small or delicate components. The small footprint eases integration into existing jigs and reduces the need for large fixtures, supporting a neater, more efficient workplace layout. Swivel function for flexible machining angles The swivelable design allows angular adjustments beyond simple indexing, opening up tasks such as angled drilling, milling of bevels, and precise orientation for assembly operations. The combination of indexed rotation and swivel capability provides flexibility when alternating between radial and angular work, reducing the number of dedicated fixtures required. This versatility supports both prototyping and batch production by enabling a greater range of operations on a single fixture. Designed for reliable integration and durable use Produced by Vertex, the VU-100 is engineered for routine use in industrial and craft environments where predictable performance matters. The robust construction and defined indexing steps facilitate straightforward integration into manual and semi‑automated processes. Clear mechanical indexing reduces reliance on digital control for simple angular tasks, offering a low‑complexity solution that complements CNC and manual machining alike while helping maintain consistent throughput. For compact, repeatable indexing with the Vertex VU-100, contact Metav Werkzeuge to arrange supply and technical advice via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data SKU: VU-100 GTIN: 4061905084782 eClass: 21020590 Manufacturer: Vertex Core dimensions & weights Diameter: 110 mm External dimensions: 228 x 177 x 117 mm Weight: 13.5 kg Index per spindle rotation: 4° Features & compatibility Parts carrier rotary table Swivelable design Compact workshop footprint Suitable for fixture integration FAQ What precision does the indexing provide? The VU-100 offers 4° indexing, enabling consistent angular positioning for repeatable machining and assembly tasks. Can the unit be integrated into existing fixtures? Yes, the VU-100 is designed for straightforward fixture integration thanks to its compact dimensions (228 x 177 x 117 mm) and robust base weight (13.5 kg) which provide stability during machining. Is the swivel function suitable for angled drilling and milling? The swivelable design of the VU-100 supports angled operations such as drilling and milling of bevels, reducing the need for multiple dedicated fixtures. Which manufacturer produces this rotary table? The indexing rotary table is produced by Vertex; the model is listed as VU-100 and is intended for workshop and small production use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high repeatability (0.01 mm), a 15-piece ER-40 collet set and a compact footprint for stable, efficient fixturing on milling machines; order the unit directly via Metav Werkzeuge or consult our specialists if clarification is required. VUA-ER40 Angle Plate with 112 mm diameter and 15-piece ER-40 collet set — Vertex The VUA-ER40 is an angle plate designed to provide secure part fixturing and repeatable clamping for workshop and light production machining tasks. 112 mm diameter for stable clamping 15-piece ER-40 collet set included Precision manufacturing with 0.01 mm accuracy Max load 15 kg for heavy-duty fixturing Engineered for reliable workshop fixturing and repeatability The clamping assembly is engineered to deliver consistent positioning and rigid support for small- to medium-sized components. With a 112 mm diameter contact face and a robust construction, the fixture resists deflection under load, helping to maintain machining tolerances. The documented 0.01 mm accuracy reflects the manufacturing standard of the component and provides a verifiable basis for quality-critical operations. As a consequence, set-up times are reduced and the risk of rework is lowered, supporting steady production throughput. Integrated ER-40 collet set for flexible mounting of workpieces Included with the angle plate is a 15-piece ER-40 collet set, covering a wide range of shaft and tool diameters (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26 mm). The collection of collets enables direct gripping of turned parts, mandrels and tooling without additional adapters, which simplifies fixturing and reduces ancillary inventory. ER-40 is an established clamping standard; its high clamping force and concentricity make it suitable for operations where runout and concentricity matter. Precision and stability that support productive machining Mass and geometry contribute to stability: the assembly weight of 14 kg and compact dimensions (180 x 110 x 181 mm) create a low centre of gravity and minimise vibration transfer during cutting. The clearly defined max. load of 15 kg guides selection for heavier workpieces while preserving positional accuracy. These measurable characteristics help planners and machine operators compare fixtures objectively and choose the right tool for specific machining tasks. Streamlined procurement and workshop integration Supplied as a complete set, the angle plate plus collet assortment reduces the need for multiple separate purchases and simplifies shelf stocking. The configuration is particularly suitable for job shops and maintenance departments that require quick reconfiguration between jobs and reliable repeatability across batches. Availability through Metav Werkzeuge adds the assurance of European distribution and quality control from the Emmerich facility, helping to shorten lead times and ensuring parts are delivered under a consistent quality filter. Request the VUA-ER40 from Metav Werkzeuge for delivery from Emmerich, or contact our consultants via info@metav-werkzeuge.com or +49 2822 7131930 for application advice and configuration support Technical Data Article number: VUA-ER40 GTIN: 4061905083761 Manufacturer: Vertex Facts Dimensions: 180 x 110 x 181 mm Diameter: 112 mm Weight: 14 kg Accuracy: 0.01 mm Max. load: 15 kg Special features Set: 15x ER-40 collets (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26) Designed for fixturing and precise part clamping Compact footprint for flexible machine mounting FAQ What collet sizes are included with the set? The set contains 15 ER-40 collets in the following sizes: 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25 and 26 mm, supplied as a complete ER-40 collet set. Can the assembly handle larger workpieces? The angle plate is rated for a maximum load of 15 kg; for heavier components a dedicated heavy-duty fixture should be selected to maintain the specified accuracy. What level of positioning accuracy can be expected in practice? The component is manufactured to an accuracy of 0.01 mm, providing high repeatability for precise machining tasks when used with appropriate set-up procedures and machine capabilities. Is the VUA-ER40 suitable for production or only for workshop use? The VUA-ER40 is suitable for both workshop and light production environments where compact, repeatable fixturing and the included ER-40 collet range meet the application requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, ready-to-deploy storage solution that combines a small footprint, clear organisation and simple logistics; the set supports efficient parts handling and reduces search time on the workbench. Order directly via Metav Werkzeuge or consult our specialists for compatibility and supply options. Vertex VHB-1218 storage box set — compact 120 x 180 x 80 mm, 60-piece configuration The VHB-1218 storage boxes are a compact set designed to organise small parts across workshops and service benches, providing a standardised approach to everyday component storage. Compact footprint: 120 x 180 x 80 mm 60-piece set for small parts storage Total weight 8.6 kg for transport planning Vertex brand for consistent quality Make the most of limited bench space with a compact organiser The 120 x 180 x 80 mm footprint delivers a practical balance between storage capacity and space economy, ideal for benches, trolleys or small shelving units. By standardising on a single box format, the set reduces clutter and speeds up component retrieval, which supports measurable time savings during assembly and maintenance tasks. The compact format also simplifies storage planning and rack layout, helping to streamline workshop workflows without introducing complex new systems. Improve parts handling and inventory clarity with a uniform set A 60-piece set creates a consistent storage environment for small parts, enabling clear labelling strategies and batch separation. Standardised containers aid stock rotation and make visual inventory checks quicker and more reliable, so replenishment decisions become data-driven rather than ad hoc. For procurement and logistics, a uniform set size reduces variability and simplifies storage allocation in pick areas and kitting operations, contributing to smoother order fulfilment and lower handling times. Benefit from dependable supply and practical handling features With a total mass of 8.6 kg, the complete set is straightforward to transport and distribute across multiple workstations. The Vertex designation denotes a long-standing supplier relationship and predictable availability from Metav Werkzeuge, which acts as a quality gateway for the European market. Choosing a branded set like this supports consistent part identification and reduces the risk of incompatible storage formats across teams, fostering operational continuity and easier onboarding for new staff. Contact Metav Werkzeuge to secure the Vertex VHB-1218 storage box set for improved workshop organisation and reliable supply chain support Technical Data SKU: VHB-1218 GTIN: 4061905083112 Brand: Vertex Facts Dimensions: 120 x 180 x 80 mm Total weight: 8.6 kg Pieces per set: 60 eClass: 21100422 Special features Designed for small parts storage Delivered as a complete set Promoted for fast dispatch via Metav channels FAQ What are the external dimensions of these storage boxes? The storage boxes have external dimensions of 120 x 180 x 80 mm, specified for compact bench and rack use. How many boxes are included in the set? The set comprises 60 pieces, supplied together as the VHB-1218 configuration to standardise small parts storage. What is the total weight of the complete set? The full set weighs 8.6 kg, facilitating transport planning and distribution between workstations. Is this set suitable for professional workshop environments? Yes, the Vertex VHB-1218 storage box set is intended for workshop and service use, offering a standardised solution for organising small parts. Where can this product be sourced for reliable European supply? The VHB-1218 is available through Metav Werkzeuge, which provides centralised distribution and quality-controlled supply for European workshops. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of hardened, precision-ground contact faces and a compact form factor (99.5 x 73 x 35 mm) to achieve secure, repeatable clamping in workshop and light industrial settings; the combination of durability, accurate gripping and straightforward retrofitting keeps set-up times low and production steady. Order the Hardened L-jaws directly via Metav Werkzeuge or ask our consultants if needed. VQC-100FJL Hardened L-jaws for VQC vises — precision-fit, hardened contact faces (Vertex) The Hardened L-jaws are a purpose-made retrofit jaw set for VQC vises, engineered to deliver repeatable clamping and secure holding across routine workshop and production tasks. Hardened, precision-ground contact surfaces Direct fit for VQC vises Compact 99.5 x 73 x 35 mm size Robust 1.27 kg construction Consistent clamping that speeds setup and reduces rework The hardened contact faces provide repeatable clamping which reduces the need for constant readjustment and minimises part movement during machining. With precision-ground seating, the jaws maintain consistent parallelism and contact pressure across repeated cycles, translating into fewer rejects and lower downtime. This focus on reliable fixation supports higher throughput in small-batch production or demanding workshop environments without introducing complex fixturing. Fast integration with existing VQC vises for minimal disruption Designed for direct replacement on VQC vises, the jaws permit quick retrofitting and immediate use. The compact footprint (99.5 x 73 x 35 mm) and modest mass ensure the upgrade does not alter the centre of gravity of the vice significantly, so existing workflows remain intact. The simplified installation reduces machine idle time and allows teams to return to productive work swiftly, offering a pragmatic route to improved clamping performance without extensive retooling. Robust construction that extends service intervals Manufactured to resist wear under repeated clamping, the jaws' hardened faces withstand abrasive contact and preserve gripping geometry over time. The robust build quality contributes to longer service intervals and lower replacement frequency, supporting a predictable maintenance schedule. This durability is particularly advantageous for workshops that run continuous shifts or for those who prioritise dependable tooling over frequent change-outs. Secure grip for varied workpieces while protecting component surfaces The precision-ground surfaces of these jaws deliver a secure hold on both small and larger workpieces while limiting surface damage through optimised contact geometry. For tasks that require both firm clamping and careful workpiece handling, the jaws balance grip with preservation of the component finish. The item is supplied as a ready-to-fit jaw set (VQC-100FJL) suitable for repeatable machining and assembly operations where process stability matters. Choose Vertex hardened L-jaws for reliable, repeatable clamping — contact Metav Werkzeuge in Emmerich for expert sourcing and fast delivery. Technical data Article number: VQC-100FJL GTIN: 4061905084331 Manufacturer: Vertex Facts ECLASS: 21029107 Dimensions: 99.5 x 73 x 35 mm Weight: 1.27 kg Special features Hardened L-jaws for VQC vises Precision-ground contact surfaces Compact retrofit design FAQ Can these jaws be fitted to all VQC vise sizes? The VQC-100FJL hardened L-jaws are designed specifically for VQC vises of the corresponding 100 series; compatibility with other VQC models should be verified by comparing mounting dimensions. How do the hardened faces affect maintenance needs? Hardened, precision-ground faces increase wear resistance and maintain gripping geometry longer, so the jaws require less frequent replacement than softer alternatives. Will the jaws damage delicate workpiece surfaces? The contact geometry of these hardened L-jaws balances firm clamping with surface protection; for very delicate finishes, a soft protective layer or dedicated soft jaws remains advisable. Is the VQC-100FJL suitable for heavy-duty milling operations? The robust construction and hardened contact faces make the jaws appropriate for many machining tasks; assess clamping force and machining forces in specific applications to confirm suitability. What are the physical dimensions and weight for planning purposes? The jaw set measures 99.5 x 73 x 35 mm and weighs 1.27 kg, allowing straightforward integration into existing setups without significant changes to centre of gravity or fixturing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Precision soft jaws built for stable, protective clamping: compact dimensions and a substantial mass combine to reduce workpiece marking and improve repeatability. Benefit from quick integration with Vertex VQC vises and confident handling of delicate components — order the VQC-100FJ via Metav Werkzeuge or consult the Metav team for compatibility advice. VQC-100FJ Soft Jaws for VQC vises — 99.5×73×50 mm, 2.97 kg (Vertex) The VQC-100FJ soft jaws are designed to provide protective, adaptable clamping for VQC vises in precision machining and assembly applications Compatible with VQC vises Compact 99.5×73×50 mm profile Weight 2.97 kg for stable clamping Increased protection for sensitive workpieces Soft-contact clamping provided by these soft jaws reduces surface damage and the need for secondary finishing. The compliant clamping faces distribute force more evenly than hard-steel jaws, lowering the risk of localised deformation during tightening. For operations where appearance or dimensional tolerances matter, this protection translates into fewer rejects and less rework, improving overall process yield and saving operator time. Compact footprint, greater bench flexibility The small external dimensions of 99.5×73×50 mm make these jaws suitable where space is limited or multiple fixtures share a workbench. Their compact profile supports flexible fixturing without adding undue bulk to the vise setup, enabling quicker changeovers and simpler handling during assembly or measurement tasks. The mass of 2.97 kg helps maintain positional stability under typical clamping loads, contributing to consistent results across batches. Seamless fit for VQC clamping systems Designed specifically for compatibility with Vertex VQC vises, the VQC-100FJ integrates without modification, allowing straightforward replacement of standard jaws. This direct fit reduces downtime during tool changes and simplifies inventory management for workshops using the VQC range. Clear alignment features and matching mounting points ensure reliable seating and repeatable clamping behaviour in every cycle. Robust service life that supports productivity A focus on practical durability underpins the design of these soft jaws: stable contact during holding phases and reduced need for retightening lead to smoother production flow. By preventing damage to finished surfaces, the jaws indirectly preserve downstream processes such as coating, inspection and assembly. The result is a workholding accessory that supports efficiency while protecting product quality. Contact Metav Werkzeuge to arrange supply of Vertex VQC soft jaws (VQC-100FJ) and receive tailored advice on integration and delivery from Emmerich — our consultants will confirm fitment and dispatch options Technical Data Article number: VQC-100FJ GTIN: 4061905084256 Brand: Vertex Data Dimensions: 99.5×73×50 mm Weight: 2.97 kg eClass: 21029107 Special features Designation: Soft jaws Application: for VQC vises Assets: Technical drawing and detailed images available FAQ What workpiece protection do the soft jaws provide? The VQC-100FJ soft jaws protect sensitive surfaces by distributing clamping force and reducing point loads, which lowers the chance of marks and the need for corrective finishing. Are these jaws compatible with all VQC vise sizes? Compatibility is intended for VQC vises; the VQC-100FJ fits standard Vertex VQC mounting interfaces. Check the vise model to ensure full alignment. Can the jaws be used for precision measurement setups? Yes, the soft clamping surface supports measurement tasks by reducing distortion and offering repeatable seating for delicate components. How does the weight affect clamping stability? At 2.97 kg, the jaw mass contributes to steady contact and helps resist shifts during tightening, improving repeatability in machining cycles. Is a modification required to fit these jaws to an existing vise? No modification is generally required for Vertex VQC systems; the VQC-100FJ is designed for straightforward installation on the corresponding vise models. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust reach and flexible illumination for precise workshop tasks: the lamp's 400 x 400 mm arm and halogen 12 V / 50 W option deliver focused light where it is needed, while compatibility with 110 V / 220 V supplies ensures flexible installation. Order the Vertex VHL-400L directly via Metav Werkzeuge or ask our consultants if needed. Vertex VHL-400L lamp — waterproof variants, 12 V / 50 W halogen, 400 x 400 mm arm The Vertex VHL-400L is a task lamp designed for bench and machine illumination, offering adjustable reach and choice of waterproof variants with halogen or LED light sources for industrial and workshop use. Robust 400 x 400 mm adjustable arm Available waterproof variants, halogen or LED 12 V / 50 W halogen option for bright focus Dual supply 110 V / 220 V compatibility Precise, efficient lighting for fine work The lamp delivers focused beam control that supports precision operations and visual inspection. With a 12 V / 50 W halogen option and alternative LED configurations, the design balances luminous output and installation flexibility. The unit’s electrical compatibility (110 V / 220 V) allows integration into diverse power environments, reducing the need for additional transformers and ensuring consistent performance across workshops and production areas. Stable reach and durable mounting for repeatable results An articulated 400 x 400 mm arm provides extended reach and controlled positioning, enabling accurate alignment of the light to the workpiece. At 3.8 kg, the assembly offers a stable feel when fixed to benches or machine frames, helping to prevent drift during measurement or assembly tasks. Waterproof variants are available for harsher environments, and the option between halogen and LED light sources supports selection according to heat, spectral preference and maintenance regimes. Simple system integration and practical workshop benefits The lamp is designed for straightforward installation and reliable day-to-day operation in industrial settings. Compatibility with common voltages (110 V / 220 V) simplifies wiring, and the alternative of LED light sources offers a lower-maintenance possibility where reduced heat or different light characteristics are preferred. Product images and technical references support specification checks, and Metav’s role as a precision partner can assist in selecting the most appropriate variant for a given production or inspection task. Discuss how the Vertex VHL-400L’s flexible arm and waterproof options can improve workshop illumination — contact Metav Werkzeuge for tailored advice and secure delivery from Emmerich. Technical data SKU: VHL-400L GTIN: 4061905084300 Brand: Vertex Weight: 3.8 kg Core specifications Arm: 400 x 400 mm Power supply: 110 V / 220 V Light: 12 V / 50 W (Halogen) Mass: 3.8 kg Features and versions Waterproof variants available Halogen or LED light source options ECLASS: 27110640 ETIM: EC001959 Images available: VHL-400L-main.png, VHL-400L-detail.png FAQ What power options are available for the lamp? The Vertex VHL-400L is compatible with 110 V / 220 V supplies; the standard halogen configuration is 12 V / 50 W, and LED variants are offered as an alternative. Can the lamp be positioned to cover different work zones? Yes, the lamp features an articulated 400 x 400 mm arm that enables adjustable reach and accurate positioning for benches and machine-based tasks. Is there an LED version of this lamp? Yes, LED variants are available alongside the halogen option within the VHL-400L range. What are the lamp’s physical dimensions and weight? The articulated arm measures 400 x 400 mm and the assembly has a mass of 3.8 kg, supporting a stable mounting solution. Which identifiers should be used for ordering or inventory? Use SKU VHL-400L and GTIN 4061905084300; the product is supplied by Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of stable dual-voltage operation and compact, lightweight construction to ensure consistent halogen illumination with minimal downtime; order the unit directly via Metav Werkzeuge or consult our team for compatibility and stock confirmation. V-B15 Transformer and Bulb — Dual-voltage 12V/50W or 24V/50W, Vertex The V-B15 Transformer and Bulb is a compact replacement unit for VHL halogen lamps, designed to provide reliable 50 W illumination in inspection and task-lighting applications. Dual voltage: 12V or 24V 50 W halogen output Compact, lightweight design Consistent power delivery for reliable halogen light The combination of a dedicated transformer and matched halogen bulb ensures a steady light output at either 12 V or 24 V, both rated at 50 W, which reduces flicker and maintains luminous consistency during demanding tasks. This technical pairing benefits precision work where stable illumination supports accurate visual inspection and reduces rework. The integrated arrangement also simplifies replacement logistics compared with sourcing separate components, making maintenance cycles more efficient. Small form factor that minimises downtime and fits confined fixtures Weighing only 0.009 kg, the unit’s compact footprint allows quick installation in fixtures designed for VHL lamps. The small mass and compact profile mean less strain on mounting fittings and faster handling during lamp changes, which translates directly into shorter service intervals and lower indirect labour costs. The modest size also helps when retrofitting into machines or stands with limited space, enabling a tidy installation without major modifications. Clear compatibility and straightforward operating notes for workshop use Designed specifically for use with VHL halogen lamps, the unit is supplied by Vertex and is identifiable by SKU V-B15 and GTIN 4061905084447. For correct operation, the selected voltage must match the fixture and wiring; the transformer–bulb assembly is available in either 12 V / 50 W or 24 V / 50 W variants to suit different systems. When replacing the lamp, allow the bulb and transformer to cool before handling and ensure connections are secure. Metav’s stock handling and distribution from Emmerich provide a dependable supply chain, reducing lead times and supporting uninterrupted workshop operations. Contact Metav Werkzeuge in Emmerich for stock confirmation and technical advice on the V-B15 transformer and bulb — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-B15 GTIN: 4061905084447 eClass: 27039101 Facts Weight: 0.009 kg Voltage / wattage: 12 V / 50 W; 24 V / 50 W Special features Compatible with VHL halogen lamp Brand: Vertex Images available: V-B15-main.png, V-B15-detail.png FAQ What voltage options are available for this transformer and bulb? The V-B15 transformer and bulb is available in two variants: 12 V / 50 W and 24 V / 50 W, allowing selection according to the fixture’s requirements. Is this unit compatible with VHL halogen lamps? Yes, the unit is specifically designed for compatibility with VHL halogen lamps and is supplied as a matched transformer-and-bulb assembly. How should the bulb be replaced to ensure safe operation? Allow the bulb and transformer to cool before touching, use appropriate gloves to avoid oil contamination, and ensure the correct voltage variant is fitted and electrical connections are secure. What identifies the product for ordering and stock checks? Order or request stock with SKU V-B15 or GTIN 4061905084447; the unit is supplied under the Vertex brand and listed in eClass 27039101. Is the unit suitable for tight or confined fixtures? Yes, the compact and lightweight design makes the assembly suitable for fixtures with limited space, facilitating retrofit and maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust construction and an adjustable 400 x 310 mm arm for precise task lighting; the low-power 6 W LED module provides bright, consistent illumination while keeping energy use to a minimum. Order the VLED-30L directly via Metav Werkzeuge or ask our consultants if needed. VLED-30L reinforced LED lamp by Vertex — adjustable arm, low-power LED The VLED-30L is a reinforced LED lamp designed for workshop and inspection tasks, offering a stable light source and a flexible mounting reach for close-up work Reinforced articulated arm 400 x 310 mm Low-power 6 W LED module IP20 rating for indoor use Stable metal construction Precise illumination that supports accurate work The reinforced design places the emphasis on consistent, shadow‑free light where it matters: directly on the workpiece. The lamp’s adjustable arm (400 x 310 mm) allows fine positioning without drift, supporting delicate inspection and assembly tasks. The integrated 6 W LED produces a steady output suitable for extended use, while the specification for the electrical supply is listed as 220 V, enabling straightforward integration into standard workshop installations. These measurable characteristics reduce rework and help maintain production quality. Efficient light output with clear electrical data A compact LED module with a rating of 12 V / 6 W delivers concentrated illumination with low energy consumption, translating into lower running costs and reduced heat at the point of use. The unit’s IP20 protection indicates suitability for dry, indoor environments such as benches, inspection stations and tool rooms; it is not intended for direct exposure to moisture. The combination of low wattage and focused optics makes the lamp an economical choice where reliable task lighting is required without complex installation. Robust mounting and ergonomic handling for everyday tasks The lamp’s reinforced fittings and articulated arm are designed to withstand frequent adjustment and the demands of workshop routines. The robust construction reduces maintenance needs and keeps the light stable during precision operations. With an overall weight of 2 kg the assembly remains manageable for bench mounting while providing the solidity required for repetitive positioning. The design supports ergonomic working postures by bringing light to the required location quickly and securely. Why Metav is a trustworthy procurement partner Selecting the right tool is as important as the tool itself; Metav Werkzeuge provides a practical supply route from its base in Emmerich, acting as a quality filter for the European market. Metav’s long experience and broad product range ensure dependable availability and a central procurement solution for workshops and trade; this partner approach complements the durability and energy efficiency of the lamp, helping to keep operations productive and predictable. Contact Metav Werkzeuge for tailored advice on the Vertex VLED-30L, arrange swift delivery from Emmerich and confirm suitability for specific workshop applications Technical data Article number / SKU: VLED-30L GTIN: 4061905083730 Manufacturer: Vertex Facts Arm: 400 x 310 mm Weight: 2 kg LED rating: 12 V / 6 W Supply: 220 V Protection: IP20 eCl@ss: 27110640 ETIM: EC001959 Special features Reinforced articulated arm Stable metal construction Low energy consumption Intended for indoor, dry environments FAQ Is the lamp suitable for workbench inspection tasks? The VLED-30L is designed for bench and inspection lighting, offering an adjustable 400 x 310 mm arm and a focused 6 W LED for close-up work. What electrical supply does the lamp require? The unit is listed with a supply rating of 220 V and an LED module specified as 12 V / 6 W; please check site requirements before installation. Can the lamp be used in damp or outdoor locations? No, the IP20 rating indicates suitability for dry, indoor environments only; the lamp is not protected against moisture. Who manufactures the lamp and where is it made? The lamp is produced by Vertex; full manufacturer details are provided below. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, robust guide-rail block that combines precise dimensions, machinable S45C steel and a threaded M4 fixing for reliable fixture assembly; order components directly via Metav Werkzeuge or request specialist advice from the consultants. Block 12TO12 – Guide-rail block, compact 12 × 20 × 10 mm (Vertex) A Block 12TO12 engineered as a compact guide-rail block for precise positioning and secure mounting in fixtures and small-scale assemblies Compact dimensions 12 x 20 x 10 mm Machined from S45C structural steel Threaded T-slot M4 for secure mounting Supplied as a set of 4 components Precise alignment in minimal space The compact 12 x 20 x 10 mm footprint delivers accurate positioning where space is restricted, ensuring consistent alignment without bulky hardware. Manufactured from S45C, a medium-carbon steel known for its machinability and strength, the component provides a stable base for repetitive operations and light assembly tasks. The design focuses on dimensional consistency and precision, reducing set-up time and minimising the need for frequent re-adjustments in jigs and fixtures. Secure fixing and straightforward integration A threaded T‑slot with M4 engagement enables direct, vibration-resistant fastening to standard guide rails and carrier plates. Supplied as a set of 4, the components simplify procurement for multi-point installations and replace worn blocks in matched groups to maintain parallelism. At 0.07 kg per block the low mass aids handling and keeps dynamic loads low, which benefits automated or semi-automated setups where minimised moving mass improves cycle stability. Robust performance for workshop use Designed for everyday workshop and light industrial environments, the block combines a machinable base material with a finish suitable for sliding and clamping applications on guide rail systems. The construction balances wear resistance with the ability to be reworked or adapted on conventional machine tools, supporting long service life and straightforward maintenance. The Vertex provenance signals consistent production standards, while compatibility with common mounting conventions keeps integration predictable and efficient. For technical clarification or to discuss suitability of Vertex components for specific fixtures, contact Metav Werkzeuge for expert guidance via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 12TO12 GTIN: 4061905084003 eClass: 23300402 Core specifications Dimensions: 12 x 20 x 10 mm Weight: 0.07 kg Mounting thread: M4 T-slot Pieces per set: 4 Materials & features Material: S45C Intended use: for guide rail applications Supply configuration: set of 4 Manufacturer: Vertex FAQ What is the primary application of this block? The Vertex Block 12TO12 is intended as a compact guide‑rail block for positioning and secure mounting in fixtures, jigs and small assemblies. Is the block sold individually or as a set? The component is supplied as a set of 4, allowing immediate multi-point installation or matched replacements. Which material is used and what are the benefits? Made from S45C, the block offers a balance of machinability and tensile strength, making it suitable for workshop machining and rework if required. Which thread and mounting standard does it use? The block features a threaded T‑slot with M4 engagement, compatible with common guide‑rail fastening practices. Can the block be used on non-ferrous rails such as aluminium? The Vertex Block 12TO12 is primarily specified by material and thread; compatibility with aluminium or other rail materials depends on the assembly design and is typically achievable with appropriate fasteners and surface treatments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise angular control, robust construction and multi-position capability for reliable indexing in production and workshop tasks; order the Vertex BS-0 directly via Metav Werkzeuge or consult our specialists for application advice. Vertex BS-0 Semi-Universal Dividing Head — 40:1 gear ratio & MT2 taper BS-0 is a semi-universal dividing head for precise indexing and indirect cutting operations on milling machines and drill presses, suitable for vertical and horizontal use Semi-universal design for versatile indexing 40:1 gear ratio for fine angular control 130 mm divider flange for larger workpieces Hardened, ground worm and tapered bearings Accurate angular control for repetitive machining The dividing head delivers repeatable results through its gear ratio 40:1, which enables fine subdivision of rotations with minimal backlash. This level of control reduces rework and shortens setup time when producing evenly spaced features such as gear teeth, bolt circles or fluted profiles. The mechanism’s smooth indexing contributes to consistent finishing results, translating machine capability into measurable production reliability. Flexible mounting and multi-plane operation With an axis height 100 mm and a 130 mm divider flange, the unit accommodates a wide range of workpiece sizes while remaining compact. The head permits dividing in both vertical and horizontal positions and offers a tilt of ±90° for inclined indexing operations. Indexing plates allow subdivision of the circumference into 15–49 parts, which supports common workshop tasks without the need for additional adapters or complex calculations. Built for endurance and precision Critical load-bearing elements are designed for longevity: the unit features a hardened and ground worm and precision tapered roller bearings, providing durable meshing and stable rotation under intermittent loads. The internal MT2 Morse taper enables secure tool or mandrel mounting, while multiple fixing holes accept 16 mm fasteners for rigid attachment to machine tables. The overall mass of 19 kg contributes to vibration damping during cutting, improving surface finish quality. Practical setup and supplied accessories The dividing head arrives with practical accessories and interface features to speed integration: the accessory set includes a TS-1 tailstock, indexing plates, a flange and an MT2 centring tip, simplifying alignment and concentric mounting of work. A base 160 x 91 mm facilitates stable positioning on most machine tables, and the total unit height of 173 mm helps plan clearances during multi-axis operations. These options make the device a versatile indexing solution for both prototype work and small-series production. For precise indexing in the workshop, rely on Metav Werkzeuge to source the Vertex BS-0 and request tailored advice from our technical consultants in Emmerich for an efficient integration into existing machinery. Technical data Article number: BS-0 GTIN: 4061905083273 Manufacturer: Vertex Core technical data Dimensions: 188 x 160 x 173 mm Weight: 19 kg Axis height: 100 mm Divider flange diameter: 130 mm Gear ratio: 40:1 Base size: 160 x 91 mm Fixing hole size: 16 mm Special features Semi-universal dividing head for indirect cutting Smooth tilting 90° for angled indexing Dividing possible in vertical and horizontal position Dividing discs allow 15–49 part divisions Internal MT2 Morse taper for centring/fixtures Accessories: TS-1 tailstock, flange, centring tip Hardened and ground worm Precision tapered roller bearings FAQ What machines is this dividing head compatible with? The Vertex BS-0 dividing head is suitable for use on milling machines and drill presses where an MT2 spindle or appropriate adaptor is provided for secure mounting. How fine can the indexing be with this unit? Indexing is achieved via the 40:1 gear ratio and the supplied dividing discs, enabling divisions of the circumference into 15–49 parts for common workshop requirements. Can the head be tilted for angled work? Yes, the unit provides smooth tilting up to ±90°, allowing indexed features to be produced at inclines as required. Which accessories are included or recommended? Standard accessories shown in the product gallery include a TS-1 tailstock, dividing discs, a flange and an MT2 centring tip; these simplify setup and ensure concentric clamping. Is the construction suitable for heavy-duty workshop use? The presence of a hardened and ground worm together with precision tapered roller bearings and a mass of 19 kg make the head robust for repeated workshop tasks while damping vibration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of FC25 cast iron stability, a compact 132×185 mm work surface and a 45° swivelling function to speed up setup times and secure small workpieces with repeatable accuracy. Order the VP-180 directly via Metav Werkzeuge or ask the Metav consultants for application advice. Vertex VP-180 Tilting Clamping Table – 45° swivel, 132×185 mm work surface The VP-180 tilting clamping table is a compact workholding device designed for precise angular positioning in milling, drilling and inspection tasks. Swivels 45° for angular clamping Compact table 132×185 mm FC25 cast iron body for stability Max load 6 kg for small workpieces Stable base for repeatable precision The VP-180 is built from FC25 cast iron, a material chosen for its excellent damping and dimensional stability. This construction reduces vibration during machining, which in turn preserves tool life and improves surface finish. The 132×185 mm top provides a defined clamping area that is easy to align on small milling machines or inspection benches; the low centre of gravity, ensured by a weight of 7.38 kg, keeps the unit secure under load. For users unfamiliar with material grades, FC25 refers to a grey cast iron grade commonly used in machine components where stiffness and vibration absorption are required. Faster setups with accurate angular clamping A 45° swivel capability allows angled operations to be completed without repeated repositioning of the workpiece, saving time and reducing cumulative alignment errors. The tilting mechanism is engineered for stable indexing so that once an angle is set it remains fixed under machining forces. With a max load of 6 kg, the device is suited to smaller components and precision fixtures where control and repeatability matter more than raw clamping capacity. The workholding concept reduces auxiliary operations and supports more efficient batch processing for small to medium series. Compact, easy to integrate into existing workflows At a height of 95 mm, the unit integrates smoothly into many machine set-ups and measuring stations without raising the centre of operation excessively. The compact footprint and predictable mounting interfaces simplify fixturing and allow the table to be combined with modular clamps or vices. Routine maintenance is straightforward: surfaces should be kept clean and light lubrication applied to the swivel joint to maintain smooth indexing. The design supports quick adoption in workshops seeking a reliable, cost-effective solution for angled clamping and inspection. For compact, accurate angular clamping from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VP-180 GTIN: 4061905084287 ECLASS: 21020702 Core figures Weight: 7.38 kg Height: 95 mm Table surface: 132×185 mm Max load: 6 kg Materials / Special features Material: FC25 cast iron Function: Swivels 45° Type: Tilting clamping table FAQ What is the maximum load capacity of the VP-180? The VP-180 tilting clamping table has a maximum load capacity of 6 kg, suitable for small components and precision fixtures. Which material is used for the body and why is it important? The body is made of FC25 cast iron; this material provides vibration damping and dimensional stability, which improves surface finish and tool life during machining. How large is the usable table surface? The usable table surface measures 132×185 mm, providing a compact yet well-defined area for clamping small workpieces and fixtures. Can the table be integrated into existing milling or inspection setups? Yes, with a height of 95 mm and a compact footprint, the unit is designed for straightforward integration into many machine tables and inspection benches. Is the swivel angle fixed or adjustable? The clamping table swivels 45°, enabling angled machining operations without repeated repositioning of the workpiece. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

A compact 90° right-angle head that pairs a 138 mm body diameter with up to 2,000 rpm for dependable angled machining and reduced cycle times. Its sturdy 12.5 kg construction provides stable cutting conditions and consistent surface quality. Order the VRA-R8 directly via Metav Werkzeuge or ask our consultants if needed. VRA-R8 90° right-angle head — Max 2,000 rpm, 138 mm body VRA-R8 is a right-angle milling head designed for precision angled machining on milling centres and machining stations, offering a compact footprint and reliable performance for workshop and industrial applications 90° right-angle head for angled machining Max 2,000 rpm operational speed 138 mm body diameter for robust support Sturdy 12.5 kg construction for stability Consistent performance for angled operations The 90-degree configuration delivers reliable, repeatable results when the tool axis must be reoriented. With a rated maximum speed of 2,000 rpm, the head maintains stable rotational behaviour under typical finishing and roughing feeds. The relatively large 138 mm body diameter increases bearing spacing, reducing deflection and helping to preserve tool geometry during side loads. That translates into fewer reworks and better dimensional adherence on angled faces. Heavy-duty build that minimises vibration A mass of 12.5 kg and a compact, rigid housing combine to dampen vibration and improve surface finish during aggressive cuts. The robust construction supports consistent concentricity and reduces chattering, which in turn extends cutting-edge life and lowers tooling costs over time. The design concentrates mass close to the mount, keeping inertia where it benefits machining stability without compromising accessibility at the workpiece. Integration and compatibility with Type R drill heads The head is compatible with a Type R drill head diameter range of 85.725–86 mm, enabling straightforward integration with existing spindle interfaces of the same family. The connection geometry and maximum speed rating should be checked against the host machine’s spindle specification; where matched, the attachment functions as an efficient means to add angled machining capability without major machine modifications. Clear geometric compatibility shortens retrofit time and reduces setup complexity. Logistics, supply certainty and workshop benefits Availability is supported by fast dispatch from stock, reducing downtime compared with long-lead custom units. For shops seeking to add angled operations without complicating production flow, this right-angle head provides a pragmatic balance between performance and ease of supply. Combined with routine maintenance, the unit supports predictable throughput and helps maintain delivery reliability in production schedules. Contact Metav Werkzeuge in Emmerich for technical compatibility checks and to reserve a Vertex VRA-R8 90° right-angle head; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VRA-R8 GTIN: 4061905084720 EClass: 21019290 Facts Body diameter: 138 mm Maximum speed: 2,000 rpm Weight: 12.5 kg Drill head (Type R) diameter: 85.725–86 mm Special features 90° orientation for angled machining Compatible with Type R drill head Ø 85.725–86 mm Fast dispatch from stock Brand: Vertex FAQ What spindle speed is recommended for this right-angle head? The VRA-R8 is rated to a maximum of 2,000 rpm; adherence to this limit ensures bearing life and consistent performance under normal cutting conditions. Is the VRA-R8 suitable for heavy side-loading operations? The 12.5 kg mass and 138 mm body diameter give the unit improved damping and reduced deflection, making it suitable for moderate side loads typical of angled milling and finishing. Which drill head sizes are compatible with the attachment? Compatibility is provided for Type R drill heads with a diameter of 85.725–86 mm, permitting direct integration where the host machine accepts that interface. How does the head contribute to tool life and surface quality? Stable bearing spacing and rigid housing minimise vibration and runout, which helps to extend cutting tool life and produce a more consistent surface finish on angled faces. Can this head be used across different machining centres? Where the spindle or mounting interface matches the Type R dimension range and the machine can operate within the head’s maximum speed, the VRA-R8 is suitable for retrofit on compatible milling centres. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a combination of precision, reliable load capacity and flexible orientation to keep setups fast and repeatable; the clamping solution delivers consistent positioning and robust support for machining and inspection. Order directly via Metav Werkzeuge or consult our advisors for tailored recommendations. VAV-4J clamping angle with free-angle rotary plate — 0.01 mm accuracy, 15 kg load The VAV-4J is a clamping angle with a free-angle rotary plate designed for precise workholding and flexible orientation in machining, measurement and inspection applications. 0.01 mm positioning accuracy 15 kg maximum load capacity 140 mm rotary plate diameter Robust 16 kg construction for stability High-precision positioning for repeatable setups The device provides 0.01 mm of repeatable positioning, which secures consistent alignment across multiple setups and reduces rework. The finely machined indexing surfaces and tight tolerances mean that the angle can be used as a reference element in both production and quality-control environments. For operations where small deviations cause downstream issues, this level of precision shortens inspection cycles and supports reliable component interchangeability. Flexible orientation reduces setup time A continuous free-angle rotary plate with a 140 mm diameter allows rapid adjustment of the clamped workpiece without the need to reposition ancillary fixtures. The smooth swivel action simplifies angular alignment, so machining programmes or measuring sequences can proceed with minimal interruption. This flexibility translates into fewer changeovers, lower setup overhead and a more efficient workflow when varied angles are required within a single production batch. Robust build for vibration-free clamping A solid construction of 16 kg mass combined with a 15 kg rated load capacity provides the rigidity needed to minimise vibration during machining and measurement. The elevated stability reduces chatter and improves surface finish, while the compact 203 mm profile offers a secure footprint on the machine bed or inspection table. Reduced movement under cutting forces helps protect both the workpiece and cutting tools, extending tool life and improving overall process economy. Suited for workshop and inspection environments Engineered for general-purpose clamping and metrology tasks, this angle plate supports a range of production and lab applications. The combination of accurate indexing and a robust platform makes it suitable for repeatable setups, demanding inspection fixtures or small-series machining. Where traceable positioning is important, the VAV-4J offers a pragmatic balance between precise orientation and everyday usability, making it a dependable component in both maintenance shops and quality departments. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex clamping angle into existing workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery. Technical Data Article number: VAV-4J GTIN: 4061905084843 Manufacturer: Vertex Facts Rotary plate diameter: 140 mm Height: 203 mm Weight: 16 kg Maximum load: 15 kg Accuracy: 0.01 mm ECLASS: 21020601 Special features Clamping angle with free-angle rotary plate Designed for precision workholding and inspection Brand: Vertex FAQ What positioning accuracy can be expected with this clamping angle? The clamping angle delivers an accuracy of 0.01 mm, enabling precise and repeatable setups for measurement and machining tasks. What load can the rotary plate support? The rotary plate supports a maximum load of 15 kg while the overall construction weight is 16 kg to ensure stable clamping. Which applications are appropriate for this device? Typical uses include workholding for small-series machining, fixture setups and inspection tasks where controlled orientation and repeatability are required. How does the free-angle rotary plate improve workflow? The continuous rotation of the plate simplifies angular alignment and reduces the need for repositioning, shortening setup times and lowering changeover effort. Which brand and SKU identify this product? This product is the Vertex clamping angle, SKU VAV-4J, supplied for precision workholding in workshop and inspection environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of an automatic impact mechanism, a 14 mm tip and a compact 120 mm form delivers consistent, defined centre marks while keeping handling light and precise. Order directly via Metav Werkzeuge or contact their consultants for specification advice and supply from the Emmerich quality hub. Automatic centre punch VACP-1 — 14 mm tip, 120 mm length (Vertex) The Automatic centre punch is a hand-held centre marker designed for precise, repeatable centre punching in metalworking and general workshop tasks. Automatic impact mechanism for repeatable marks 14 mm tip diameter for precise centre points 120 mm overall length for secure handling Lightweight at 0.07 kg for comfortable use Consistent centre marking for reliable drill starts A robust mechanical impact delivers precision without an external hammer, ensuring repeatability across successive marks. The spring-driven action produces a defined indentation that simplifies drill alignment and reduces wander at the start of a hole. For workshop environments where process reliability matters, this compact marker helps maintain consistent part quality and faster set-up times. The simple mechanical principle also makes the result easy to predict, which benefits repeat production runs and occasional one-off jobs alike. Designed for fast, ergonomic workshop operation With an overall length of 120 mm and a mass of only 0.07 kg, the tool balances positive control with low operator fatigue. The body length provides a comfortable grip while the automatic striking action removes the need for separate striking tools, speeding up marking tasks and reducing handling steps. This combination of compact design and automated impact delivers measurable time savings in marking workflows and contributes directly to improved throughput and operator comfort. Low-maintenance tool that integrates into workshop routines The straightforward mechanical construction minimises maintenance requirements and supports long service life under normal workshop use. Periodic cleaning and occasional lubrication of the mechanism are normally sufficient to keep performance stable. The 14 mm tip dimension provides a clearly defined contact area for consistent centre points. For confirmation on compatibility with specific materials or applications, Metav Werkzeuge can supply additional technical details and guidance by email or phone. Choose Vertex quality: contact Metav Werkzeuge for tailored advice and reliable supply from our Emmerich quality hub. Technical Data Article number: VACP-1 GTIN: 4061905083358 Manufacturer: Vertex Machinery Works Co., Ltd. Core specifications Diameter: 14 mm Length: 120 mm Weight: 0.07 kg eClass: 21022304 Special features Automatic centre punch mechanism Compact hand-held design SKU: VACP-1 Product type: Centre punch FAQ How does the automatic mechanism operate? The automatic mechanism in the Automatic centre punch uses a spring‑driven striker that creates an impact when pressed, producing a repeatable indentation without a hammer. What size of mark does the tip make? The tool is specified with a 14 mm tip diameter, which gives a clearly defined centre point suitable for drill starting and alignment tasks. Is the tool suitable for regular workshop use? Yes; the VACP-1 from Vertex is designed for routine workshop marking and benefits from a simple mechanical design that supports regular use with minimal maintenance. How should the centre punch be maintained? Keep the tool clean and free of swarf; occasional light lubrication of the mechanism is recommended to maintain smooth operation and consistent striking force. Can the centre marks be used as drill start points? The indentations produced by the VACP-1 provide reliable drill start points and help to prevent drill wandering when beginning a hole. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of 150 ft-lb torque, high rotational speed and robust 9.8 kg construction for consistent throughput in assembly operations; order directly via Metav Werkzeuge or consult the Metav team for application advice. Pneumatic Pull Rod PD-150-R8 — 150 ft-lb torque · 3,000 rpm · Vertex The Pneumatic Pull Rod PD-150-R8 is a compact pneumatic tensioning and fastening tool designed for industrial assembly tasks that demand controlled torque and rapid cycle rates. 150 ft-lb maximum torque Up to 3,000 rpm operational speed Operates at 90 psi (6.3 kg/cm²) Robust 9.8 kg construction Optimised throughput with measurable performance The PD-150-R8 delivers a rated 150 ft-lb of torque combined with a peak rotation of 3,000 rpm, which translates into faster cycle times on repetitive fastening or tensioning operations. Torque is the rotational force applied at the drive output; higher torque reduces the number of passes needed on stubborn fastenings and shortens overall process time. The combination of controlled torque and elevated speed makes the unit suitable for workshop lines where consistency and repeatability are required, helping to reduce downtime related to under- or over-tightening. Designed for reliable pneumatic operation and safety Built for pneumatic supply at 90 psi / 6.3 kg/cm², this tensioning tool uses compressed air to produce its drive output, avoiding reliance on mains-only power. The model accepts AC 110V or 220V for ancillary electronics and DC 24V where low-voltage control is required, enabling flexible integration with existing control systems. At 9.8 kg, the structure balances heft for stability with manageable handling during fixture changes; mass contributes to smooth torque delivery and reduces vibration transfer to adjacent components. Practical integration in assembly and maintenance workflows The PD-150-R8 is suitable for a range of industrial assembly tasks, from production-line fastening to maintenance where a controlled pneumatic drive is preferred. The supply variants and compact footprint facilitate integration into existing rigs and jigs. For users less familiar with pneumatic specifications, psi denotes pounds per square inch of air pressure, and matching compressor capability to the stated 90 psi ensures the tool reaches its rated performance without pressure drop. The solid build and clear performance metrics simplify process planning and spare parts forecasting. Contact Metav Werkzeuge in Emmerich for tailored procurement and technical guidance on Vertex pneumatic tools; email info@metav-werkzeuge.com or call +49 2822 7131930 for application-oriented advice and delivery options Technical data SKU: PD-150-R8 GTIN: 4061905084430 Brand: Vertex ECLASS: 23309104 Performance data Torque: 150 ft-lb Speed: 3,000 rpm Air pressure: 90 psi / 6.3 kg/cm² Weight: 9.8 kg Supply voltage: AC 110V or 220V; DC 24V Special features Pneumatic operation High rotational speed for fast cycles Robust construction for industrial use Product images available in gallery FAQ What torque and speed does the tool provide? The Pneumatic Pull Rod PD-150-R8 delivers 150 ft-lb of torque and operates up to 3,000 rpm, suitable for high-throughput fastening and tensioning tasks. Which air pressure is required for optimal performance? Optimal operation of the PD-150-R8 is specified at 90 psi (6.3 kg/cm²); maintaining this supply prevents performance loss due to pressure drop. Can the unit be integrated with existing voltage systems? Yes; the PD-150-R8 accepts AC 110V or 220V for auxiliary functions and DC 24V for low-voltage control interfaces. Is the tool suitable for continuous assembly-line use? The robust design and rated torque make the PD-150-R8 suitable for continuous industrial assembly cycles where pneumatic drive is preferred. What is the model identifier for ordering spare parts? Order and spare parts references use SKU PD-150-R8 and the GTIN 4061905084430 for accurate identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise parallel shims, a wide size range and compact storage for efficient setup and repeatable setups on the shop floor. Order the set directly via Metav Werkzeuge or consult the team for application advice. VP-018 Parallel shim set with metric sizes and compact tray The VP-018 parallel shim set is a workshop-grade spacer system for aligning and levelling components during fixturing, setup and inspection tasks. 20-piece precision shim set Sizes from 3 to 41 mm in steps Compact storage tray 290×230×73 mm Total weight 2.5 kg Maintain machine alignment and repeatability with precision shims The VP-018 delivers controlled spacing and parallelism where surgical accuracy is required. Each shim is designed for consistent thickness and edge geometry so that alignment and repeatability are improved during assembly, set-up and tool changes. Using a systematic shim strategy reduces time spent on iterative adjustments and supports faster changeovers in production environments. The clear size progression from narrow to wider shims enables fine incremental corrections without adding complex tooling or adjustments. Broad size range for flexible fixturing and set-up Containing two pieces of each width between 3 mm and 41 mm, all with a 150 mm length, the set covers common workshop needs for shimming, spacing and parallel support. This variety allows rapid selection of the required cross-section to correct small misalignments or to build accurate stacked thicknesses for bespoke setups. The ability to combine shims to achieve precise incremental heights reduces reliance on custom-made spacers and supports versatile use across jigs, fixtures and inspection fixtures. Practical storage for tidy workstation workflow The compact tray, measuring 290×230×73 mm, keeps all components organised and protected, making the set easy to transport between machines or to a bench for inspection tasks. A defined location for each shim size speeds up retrieval and return, which contributes to a neater workplace and fewer lost parts. Storing components systematically lowers downtime caused by searching for the right spacer and supports consistent process control in routine operations. Engineered for dependable workshop performance Manufactured under the Vertex range, the set is intended for regular use in workshop environments and bench-level precision tasks. The overall mass of 2.5 kg balances portability and robustness for everyday handling. By integrating this shim set into standard operating procedures, calibration and maintenance cycles become more predictable, lowering the risk of misalignment-related rework and keeping production quality consistent. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VP-018 parallel shim set into existing workflows or to request additional technical details from our specialists at Metav Werkzeuge in Emmerich Technical data Article number: VP-018 GTIN: 4061905084225 eClass: 21170610 Customs tariff number: 73182200 Data Dimensions: 290×230×73 mm Weight: 2.5 kg Pieces per set: 20 Special features Contents: two shims each of widths 3 mm to 41 mm, length 150 mm Product type: parallel shims for height and spacing adjustments Packaging dimensions: 290×230×73 mm FAQ What is included in the VP-018 set? The VP-018 set contains two shims of each width from 3 mm to 41 mm, all 150 mm long, supplied in a compact storage tray for organised workshop use. Can the shims be used for fixture levelling and alignment? Yes, the VP-018 parallel shim set is intended for levelling, spacing and alignment tasks in jigs, fixtures and during machine set-up. Is the VP-018 suitable for mobile usage between machines? The compact tray and a total weight of 2.5 kg make the VP-018 convenient to carry between benches and machines while keeping components organised. How does the size range support fine adjustments? The set’s graded widths enable incremental stacking to achieve precise heights without bespoke spacers, allowing accurate corrections and repeatable setups. Which brand manufactures this shim set? The VP-018 is manufactured by Vertex and designed for reliable workshop performance within industrial and trade applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan