Calibrated Gauge Block, Calibrated Certificate Included - Filetta
€183.00
Product information "Calibrated Gauge Block, Calibrated Certificate Included - Filetta"
Take advantage of a calibrated reference block that supports routine verification for both surface roughness and thickness instruments, combining immediate usability with measurable traceability; order the Filetta standard directly via Metav Werkzeuge or contact our consultants for application advice.
Filetta Calibrated Reference Block MS909.398 — calibration standard for roughness and thickness checks
a calibrated reference block designed as a verification standard for surface roughness and ultrasonic thickness measurement instruments, offering a clear reference for routine quality control
- Calibrated reference standard
- Suitable for roughness and thickness checks
- Filetta SKU MS909.398
Reliable verification that supports measurement consistency
A calibrated reference block provides an objective comparison point for measurement instruments, improving measurement reliability across inspection routines. Supplied ready for use, this standard simplifies routine checks of surface and thickness instruments and reduces uncertain readings by offering a stable, known reference. The visible benefit for production and quality teams is fewer inconclusive measurements and a faster return to process stability after instrument verification.
Compatible with workshop and laboratory routines
This reference block is suitable for both workshop-level spot checks and lab-based verification procedures. Its design supports comparative checks against surface roughness testers and ultrasonic thickness gauges, enabling quick confirmation of instrument behaviour without complex setup. Where traceable references are required in incoming inspection or periodic calibration checks, a dedicated block like this becomes an efficient, low-effort tool in the quality toolkit.
Practical advantages for quality management
Integrating a dedicated calibration standard into a measurement routine streamlines documentation and audit trails. Regular use of a reference block helps to identify drift, wear or probe issues before they affect production parts, providing a clear rational case for preventive maintenance and reduced scrap. The measurable outcome is improved process control and a demonstrable basis for quality decisions during internal or external audits.
Trust and supply backed by a specialist partner
Metav’s role as a precision partner means access to a broad range of calibrated standards and measurement solutions. Combining this Filetta standard with Metav’s supply chain ensures prompt availability and consistent quality for workshop and industrial users. For teams seeking dependable verification without overcomplication, the standard forms part of a straightforward approach to keeping instruments validated and production dependable.
Contact Metav Werkzeuge in Emmerich for advice and delivery of Filetta calibrated reference standards — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific instruments
Technical data
- Article number: MS909.398
- Manufacturer: Filetta
- Image file: MS909398-main.jpg
Core data
- Category: Messgeräte / Rauheitsmessgerät / Ultrasonic thickness gauge
- Delivery state: Calibrated reference standard
Special features
- Intended use: Reference for roughness and thickness checks
- Documentation: Calibration certificate included with delivery
- Brand: Filetta
FAQ
What is the primary purpose of this reference block?
The Filetta calibrated reference block MS909.398 functions as a stable comparison standard for verifying the performance of surface roughness and ultrasonic thickness measurement instruments.
Is the block delivered ready for verification work?
Yes. The Filetta MS909.398 is supplied as a calibrated reference and is accompanied by a calibration certificate to document its status.
Which instruments can be checked with this standard?
Typical applications include verification of surface roughness testers and ultrasonic thickness gauges, where the block provides a known reference for comparative checks.
How often should the reference block be used in routine checks?
Frequency depends on process criticality; for production-critical measurements a quick verification at shift start or before a new batch is advisable to detect instrument drift early.
How should the block be stored to preserve its reference condition?
Store the block in a stable, dry environment free from contamination and avoid impacts; handle with care to preserve the reference surfaces and the validity of subsequent checks.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
Take advantage of the combination of a wide 1.5–200 mm measuring range, 0.01 mm reading resolution and a rugged IP65 rating for reliable thickness control across mixed-metal production. Order the instrument directly via Metav Werkzeuge or consult Metav's specialists for application advice. MS910.480 Ultrasonic Thickness Gauge — Filetta digital gauge with 1.5–200 mm range & 0.01 mm resolution The MS910.480 Ultrasonic Thickness Gauge is a digital, workshop‑ready instrument for fast, non‑destructive thickness measurement on a variety of metals and assemblies Digital measurement, 1.5–200 mm range 0.01 mm reading resolution IP65 protection for workshop use Includes calibration block and USB cable Broad range for mixed‑metal production and maintenance With a measurement window of 1.5–200 mm, this ultrasonic gauge addresses both thin‑wall inspections and substantially thicker components without the need to change instruments. The 0.01 mm reading resolution supports precise thickness logging while the ultrasonic, time‑of‑flight principle enables non‑destructive checks on finished parts and installations. Suitability for steel, cast iron, aluminium, copper and brass makes the instrument a practical choice where varied material mixes are processed or maintained, eliminating guesswork when switching between alloys. Stable readings and durability for repeatable quality control A magnetic transducer face provides reliable contact on ferrous components, improving coupling and reducing measurement scatter during handheld use. The illuminated LCD with backlight keeps data legible in poorly lit workshops, and the IP65 enclosure rating protects the electronics from dust ingress and water jets encountered on the shop floor. Combined, these characteristics yield fast, repeatable measurements that integrate with routine quality checks and in‑line maintenance procedures. Traceable results and ready‑to‑use delivery for inspection workflows Delivered complete with a calibration block and a werkmessprotokoll (test report), the instrument supports traceability and immediate inclusion in quality documentation. The package also contains a USB cable, power adapter and a standard transducer, while 2x Li 18650 batteries (included) ensure mobility. The operating temperature span of -20°C to 50°C accommodates cold stores and heated production areas alike, so calibration and field verification can be carried out wherever required without extra tooling. For reliable thickness measurement with Filetta accuracy, contact Metav Werkzeuge in Emmerich for tailored advice or to place an order via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS910.480 Manufacturer: Filetta Design: Digital Measurement range: 1.5–200 mm Resolution / reading: 0.01 mm Accuracy: 0.01 Protection class: IP65 Operating temperature: -20°C to 50°C Display: LCD with backlight Power: 2x Li 18650 batteries (included) Accessories: USB cable; power adapter; calibration block; test report; standard transducer Special feature: magnetic transducer face Suitable materials: steel; cast iron; aluminium; copper; brass Facts Measurement principle: ultrasonic time‑of‑flight Weight: see manufacturer data SKU: MS910.480 Special features Ready for workshop use Traceable calibration with test report Portable, battery‑powered operation Robust casing for industrial environments FAQ What measurement range does the MS910.480 cover? The MS910.480 ultrasonic thickness gauge measures from 1.5 mm up to 200 mm, enabling inspections from thin sheets to substantial metal parts. Which materials can be measured with this gauge? The instrument is suitable for steel, cast iron, aluminium, copper (natural copper) and brass, as stated in the product specification. Is the device delivered calibrated and with documentation? Yes, the supplied package includes a calibration block and a werkmessprotokoll (test report) to support traceability in inspection records. How is the MS910.480 powered and what is included for data transfer? Power is provided by 2x Li 18650 batteries (included) and data transfer is possible via the supplied USB cable. Can the gauge be used in harsh workshop conditions? The unit has an IP65 rating and an operating temperature range of -20°C to 50°C, making it robust for many industrial environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com