200mm Ultrasonic Thickness Gauge Magnetic Probe, LCD Backlight, IP65 - Filetta

Reliable power and straightforward replacement: the compact Li 18650 cell and original Filetta build quality combine to keep portable measuring instruments running with minimal downtime. Benefit from a proven cell format and quick parts availability; order the replacement directly via Metav Werkzeuge or contact our consultants for application advice. Battery Li 18650 – Rechargeable Li‑ion cell for measuring instruments (Filetta) Battery Li 18650 as a compact, rechargeable power source intended for handheld precision instruments such as roughness and ultrasonic thickness gauges Li‑ion 18650 cell chemistry Rechargeable spare cell Compact, high‑energy format Original Filetta spare part MS497.963 Reliable power for continuous measurement accuracy The Li 18650 format provides a stable power source that helps maintain consistent instrument behaviour during inspection runs. For portable metrology tools, voltage stability and predictable discharge characteristics directly support repeatable readings and reliable data capture; this reduces the risk of interrupted measurement sessions and limits the need for repeated calibrations. The compact cell format also minimises weight and space impact in handheld housings, preserving the instrument's ergonomics and ease of handling while delivering dependable energy for standard measuring routines. Minimise downtime with a straightforward spare‑part solution As an original spare component (SKU MS497.963) from Filetta, the cell is designed for uncomplicated replacement and workshop logistics. Using a standardised 18650 format simplifies inventory management and ensures compatibility with common battery holders used in portable roughness and ultrasonic thickness gauges. Rapid swap‑outs mean less lost production time and a lower overhead for maintenance. Metav Werkzeuge supports procurement and logistics, offering a consistent supply channel and a quality filter for European workshops that demand regular access to calibrated and replacement parts. Safe handling and responsible workshop practice The Li‑ion chemistry calls for standard safety and handling measures: use compatible chargers, avoid extreme temperatures, and follow local regulations for end‑of‑life disposal. Correct handling protects instrument electronics and extends the service life of both the energy cell and the measuring device. Metav’s approach to precision supplies emphasises traceable sourcing and dependable stock levels, supporting customers who require predictable delivery and straightforward replacement strategies for their inspection equipment. Contact Metav Werkzeuge for procurement and technical guidance on Filetta replacement cells and compatible measuring instruments Technical data Article number: MS497.963 Manufacturer: Filetta Designation: Battery Cell type: Li 18650 Category path: Messgeräte › Rauheitsmessgerät › Ultraschall‑Dickenmessgerät Key figures Cell format: 18650 SKU: MS497.963 Special features Li‑ion chemistry Rechargeable cell format Original spare part by Filetta Intended for handheld measuring instruments and portable gauges FAQ Is this cell rechargeable? Yes. The Filetta Li 18650 cell is a rechargeable Li‑ion format commonly used as a replacement power source in portable measuring equipment. Which instruments is this cell suitable for? The replacement cell is intended for use in handheld metrology devices, for example roughness gauges and ultrasonic thickness gauges, where the 18650 format is supported. How is the replacement identified in stock? The spare part appears under SKU MS497.963 and as a Filetta original battery cell in procurement listings. Any special charging recommendations? Use a charger compatible with Li‑ion cells and follow the instrument manufacturer's guidance to avoid overcharge and to maintain battery longevity. How should depleted cells be disposed of? Follow local regulations for lithium‑ion battery recycling and disposal; return schemes or designated recycling points are recommended. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a calibrated reference block that supports routine verification for both surface roughness and thickness instruments, combining immediate usability with measurable traceability; order the Filetta standard directly via Metav Werkzeuge or contact our consultants for application advice. Filetta Calibrated Reference Block MS909.398 — calibration standard for roughness and thickness checks a calibrated reference block designed as a verification standard for surface roughness and ultrasonic thickness measurement instruments, offering a clear reference for routine quality control Calibrated reference standard Suitable for roughness and thickness checks Filetta SKU MS909.398 Reliable verification that supports measurement consistency A calibrated reference block provides an objective comparison point for measurement instruments, improving measurement reliability across inspection routines. Supplied ready for use, this standard simplifies routine checks of surface and thickness instruments and reduces uncertain readings by offering a stable, known reference. The visible benefit for production and quality teams is fewer inconclusive measurements and a faster return to process stability after instrument verification. Compatible with workshop and laboratory routines This reference block is suitable for both workshop-level spot checks and lab-based verification procedures. Its design supports comparative checks against surface roughness testers and ultrasonic thickness gauges, enabling quick confirmation of instrument behaviour without complex setup. Where traceable references are required in incoming inspection or periodic calibration checks, a dedicated block like this becomes an efficient, low-effort tool in the quality toolkit. Practical advantages for quality management Integrating a dedicated calibration standard into a measurement routine streamlines documentation and audit trails. Regular use of a reference block helps to identify drift, wear or probe issues before they affect production parts, providing a clear rational case for preventive maintenance and reduced scrap. The measurable outcome is improved process control and a demonstrable basis for quality decisions during internal or external audits. Trust and supply backed by a specialist partner Metav’s role as a precision partner means access to a broad range of calibrated standards and measurement solutions. Combining this Filetta standard with Metav’s supply chain ensures prompt availability and consistent quality for workshop and industrial users. For teams seeking dependable verification without overcomplication, the standard forms part of a straightforward approach to keeping instruments validated and production dependable. Contact Metav Werkzeuge in Emmerich for advice and delivery of Filetta calibrated reference standards — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific instruments Technical data Article number: MS909.398 Manufacturer: Filetta Image file: MS909398-main.jpg Core data Category: Messgeräte / Rauheitsmessgerät / Ultrasonic thickness gauge Delivery state: Calibrated reference standard Special features Intended use: Reference for roughness and thickness checks Documentation: Calibration certificate included with delivery Brand: Filetta FAQ What is the primary purpose of this reference block? The Filetta calibrated reference block MS909.398 functions as a stable comparison standard for verifying the performance of surface roughness and ultrasonic thickness measurement instruments. Is the block delivered ready for verification work? Yes. The Filetta MS909.398 is supplied as a calibrated reference and is accompanied by a calibration certificate to document its status. Which instruments can be checked with this standard? Typical applications include verification of surface roughness testers and ultrasonic thickness gauges, where the block provides a known reference for comparative checks. How often should the reference block be used in routine checks? Frequency depends on process criticality; for production-critical measurements a quick verification at shift start or before a new batch is advisable to detect instrument drift early. How should the block be stored to preserve its reference condition? Store the block in a stable, dry environment free from contamination and avoid impacts; handle with care to preserve the reference surfaces and the validity of subsequent checks. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Combine reliable signal integrity with broad compatibility for roughness and thickness testing to raise measurement confidence on the shop floor. The Filetta measuring transducer offers industrial-grade construction and precise signal capture for repeatable quality control; order the unit directly via Metav Werkzeuge or consult our specialists for system integration. Measurement Transducer (Messwertaufnehmer) – Filetta transducer for roughness and ultrasonic thickness gauges Measurement Transducer (Messwertaufnehmer) is a precision sensor designed for integration with roughness metres and ultrasonic thickness testing equipment in industrial metrology and quality-control workflows. Precision signal capture for surface tests Compatible with roughness and ultrasonic systems Industrial-grade construction, SKU MS910.483 Improved measurement accuracy where it matters A dedicated measuring transducer converts mechanical surface or thickness interactions into clean electrical signals, reducing variation caused by interface inconsistencies. By prioritising signal integrity and a stable sensing element, the device supports higher repeatability in production checks and incoming inspection. The resulting data is more reliable for statistical process control and reduces costly rework by helping to detect deviations earlier in the process. Simple integration and durable design for workshop use The unit is designed for straightforward integration into existing metrology setups, enabling connection to standard instruments used in roughness and thickness measurement chains. The construction emphasises robust mechanics and stable mounting to limit measurement artefacts from handling. As a result, commissioning time is minimised and instrument uptime is increased, which supports leaner production cycles and better throughput. Application breadth and supply reliability Suited to both surface texture assessment and ultrasonic thickness verification, this sensor bridges the gap between tactile roughness gauges and ultrasonic instruments in mixed inspection environments. Supplied under the Filetta designation with SKU MS910.483, the transducer benefits from Metav's position as a precision partner: a European quality filter and logistics hub that keeps precision tools accessible to workshops of every size. Trust in consistent availability and technical advice to match the transducer to specific measurement tasks. Contact Metav Werkzeuge for application advice and integration details for the Filetta measuring transducer MS910.483 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: MS910.483 Product: Measurement transducer (Messwertaufnehmer) Brand: Filetta Category: Ultrasonic thickness gauge / roughness gauge Core data No numeric specifications provided in the dataset Special features Application: Roughness measurement; ultrasonic thickness measurement Category path: Measuring instruments > Roughness gauge > Ultrasonic thickness gauge Story trigger: rauheitsmessgerät FAQ What applications is this transducer suitable for? The Filetta measuring transducer (MS910.483) is intended for integration into inspection setups that perform roughness measurement and ultrasonic thickness checks, supporting surface and wall-thickness verification workflows. Can the transducer be connected to existing instruments? Connection depends on the host instrument; the Filetta transducer is built for straightforward integration with common metrology systems — consult the instrument manufacturer or Metav Werkzeuge for interface compatibility. Does the transducer require special handling or mounting? Stable mounting improves repeatability; the transducer should be secured according to the host system’s mechanical interface to preserve signal integrity during measurement. Is the Filetta unit appropriate for production-line quality control? Yes. The transducer’s focus on consistent signal capture and robust construction makes it suitable for routine production checks and incoming inspection tasks in industrial environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Benefit from a robust measuring transducer with a 1.5–60 mm detection range and proven Filetta engineering for dependable ultrasonic thickness checks; order the unit directly via Metav Werkzeuge or consult our specialist advisors for application matching. Measuring transducer MS910.481 – Ultrasonic probe with 1.5–60 mm range (Filetta) A compact measuring transducer designed for ultrasonic thickness measurement and surface roughness testing, offering straightforward integration into inspection workflows and durable performance for workshop and industrial environments. Wide 1.5–60 mm measuring range Compatible with ultrasonic thickness gauges Filetta industrial-grade construction Consistent thickness readings where it matters most The measuring transducer MS910.481 delivers a measured detection span of 1.5–60 mm, which covers a wide range of thin to medium-thickness components. This range makes the unit suitable for corrosion monitoring, spot checks on welded parts and quality control of machined components. The result is a practical combination of reach and sensitivity that supports efficient non-destructive testing and faster decision-making on production lines. Easy integration reduces inspection complexity Designed for compatibility with standard ultrasonic thickness gauges, the probe simplifies system set-up and maintenance. Clear signal coupling and stable acoustic response translate into fewer repeated measurements and less downtime. The compact probe geometry aids handling in confined spaces, while its predictable response supports repeatable results—helping to streamline inspection routines and maintain throughput in high-volume operations. Practical applications in roughness and thickness control This probe is suitable for both ultrasonic thickness measurement and surface roughness-related inspections in metalworking and fabrication contexts. Typical uses include in-service corrosion checks, incoming material spot checks and quality control of welded assemblies. By pairing MS910.481 with the appropriate gauge, inspection tasks become more reliable and documentation of part condition more straightforward, supporting traceable quality control procedures. Built for durability and trustworthy supply Manufactured by Filetta and offered through Metav’s distribution, the probe benefits from industrial-grade build quality aimed at regular workshop use. The focus on robust materials and consistent manufacture helps maintain repeatability across measurement cycles. Metav’s presence in Emmerich further ensures a dependable supply chain and a quality‑focused selection for professional metrology needs, reinforcing long-term operational reliability. For specification matching or to order the Filetta measuring transducer MS910.481 for integration into an existing ultrasonic measurement setup, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — our advisors can assist with technical alignment and delivery options Technical Data Article number: MS910.481 Name: Measuring transducer Brand: Filetta Category: Ultrasonic thickness gauge (Ultraschall-Dickenmessgerät) Facts Measuring range: 1.5–60 mm SKU: MS910.481 UID: MS910.481 Special features Application: Roughness measuring device / ultrasonic thickness measurement Industrial-grade construction Compact probe design for confined spaces FAQ What thickness range does the probe cover? The Filetta measuring transducer MS910.481 covers a thickness range from 1.5 to 60 mm and is intended for ultrasonic thickness measurement tasks. Is the probe suitable for corrosion monitoring on pipelines and tanks? Yes, the probe is suitable for spot checks and corrosion monitoring within its 1.5–60 mm detection range when used with a compatible ultrasonic thickness gauge. Can the transducer be used for surface roughness inspections? The transducer is specified for use in contexts that include roughness measuring device workflows, complementing thickness checks where surface condition is relevant. Which devices is MS910.481 compatible with? MS910.481 is compatible with standard ultrasonic thickness gauges; compatibility depends on the gauge’s probe input and software, so verification against the gauge specifications is recommended. How does the probe support repeatable measurements? The probe’s industrial-grade design and stable acoustic response contribute to consistent readings and repeatability across routine inspection cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com