1.5-60mm Probe For Surface Measurement, Ultrasonic Compatibility - Filetta
€1,581.00
Product information "1.5-60mm Probe For Surface Measurement, Ultrasonic Compatibility - Filetta"
Benefit from a robust measuring transducer with a 1.5–60 mm detection range and proven Filetta engineering for dependable ultrasonic thickness checks; order the unit directly via Metav Werkzeuge or consult our specialist advisors for application matching.
Measuring transducer MS910.481 – Ultrasonic probe with 1.5–60 mm range (Filetta)
A compact measuring transducer designed for ultrasonic thickness measurement and surface roughness testing, offering straightforward integration into inspection workflows and durable performance for workshop and industrial environments.
- Wide 1.5–60 mm measuring range
- Compatible with ultrasonic thickness gauges
- Filetta industrial-grade construction
Consistent thickness readings where it matters most
The measuring transducer MS910.481 delivers a measured detection span of 1.5–60 mm, which covers a wide range of thin to medium-thickness components. This range makes the unit suitable for corrosion monitoring, spot checks on welded parts and quality control of machined components. The result is a practical combination of reach and sensitivity that supports efficient non-destructive testing and faster decision-making on production lines.
Easy integration reduces inspection complexity
Designed for compatibility with standard ultrasonic thickness gauges, the probe simplifies system set-up and maintenance. Clear signal coupling and stable acoustic response translate into fewer repeated measurements and less downtime. The compact probe geometry aids handling in confined spaces, while its predictable response supports repeatable results—helping to streamline inspection routines and maintain throughput in high-volume operations.
Practical applications in roughness and thickness control
This probe is suitable for both ultrasonic thickness measurement and surface roughness-related inspections in metalworking and fabrication contexts. Typical uses include in-service corrosion checks, incoming material spot checks and quality control of welded assemblies. By pairing MS910.481 with the appropriate gauge, inspection tasks become more reliable and documentation of part condition more straightforward, supporting traceable quality control procedures.
Built for durability and trustworthy supply
Manufactured by Filetta and offered through Metav’s distribution, the probe benefits from industrial-grade build quality aimed at regular workshop use. The focus on robust materials and consistent manufacture helps maintain repeatability across measurement cycles. Metav’s presence in Emmerich further ensures a dependable supply chain and a quality‑focused selection for professional metrology needs, reinforcing long-term operational reliability.
For specification matching or to order the Filetta measuring transducer MS910.481 for integration into an existing ultrasonic measurement setup, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — our advisors can assist with technical alignment and delivery options
Technical Data
- Article number: MS910.481
- Name: Measuring transducer
- Brand: Filetta
- Category: Ultrasonic thickness gauge (Ultraschall-Dickenmessgerät)
Facts
- Measuring range: 1.5–60 mm
- SKU: MS910.481
- UID: MS910.481
Special features
- Application: Roughness measuring device / ultrasonic thickness measurement
- Industrial-grade construction
- Compact probe design for confined spaces
FAQ
What thickness range does the probe cover?
The Filetta measuring transducer MS910.481 covers a thickness range from 1.5 to 60 mm and is intended for ultrasonic thickness measurement tasks.
Is the probe suitable for corrosion monitoring on pipelines and tanks?
Yes, the probe is suitable for spot checks and corrosion monitoring within its 1.5–60 mm detection range when used with a compatible ultrasonic thickness gauge.
Can the transducer be used for surface roughness inspections?
The transducer is specified for use in contexts that include roughness measuring device workflows, complementing thickness checks where surface condition is relevant.
Which devices is MS910.481 compatible with?
MS910.481 is compatible with standard ultrasonic thickness gauges; compatibility depends on the gauge’s probe input and software, so verification against the gauge specifications is recommended.
How does the probe support repeatable measurements?
The probe’s industrial-grade design and stable acoustic response contribute to consistent readings and repeatability across routine inspection cycles.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
Take advantage of the combination of a wide 1.5–200 mm measuring range, 0.01 mm reading resolution and a rugged IP65 rating for reliable thickness control across mixed-metal production. Order the instrument directly via Metav Werkzeuge or consult Metav's specialists for application advice. MS910.480 Ultrasonic Thickness Gauge — Filetta digital gauge with 1.5–200 mm range & 0.01 mm resolution The MS910.480 Ultrasonic Thickness Gauge is a digital, workshop‑ready instrument for fast, non‑destructive thickness measurement on a variety of metals and assemblies Digital measurement, 1.5–200 mm range 0.01 mm reading resolution IP65 protection for workshop use Includes calibration block and USB cable Broad range for mixed‑metal production and maintenance With a measurement window of 1.5–200 mm, this ultrasonic gauge addresses both thin‑wall inspections and substantially thicker components without the need to change instruments. The 0.01 mm reading resolution supports precise thickness logging while the ultrasonic, time‑of‑flight principle enables non‑destructive checks on finished parts and installations. Suitability for steel, cast iron, aluminium, copper and brass makes the instrument a practical choice where varied material mixes are processed or maintained, eliminating guesswork when switching between alloys. Stable readings and durability for repeatable quality control A magnetic transducer face provides reliable contact on ferrous components, improving coupling and reducing measurement scatter during handheld use. The illuminated LCD with backlight keeps data legible in poorly lit workshops, and the IP65 enclosure rating protects the electronics from dust ingress and water jets encountered on the shop floor. Combined, these characteristics yield fast, repeatable measurements that integrate with routine quality checks and in‑line maintenance procedures. Traceable results and ready‑to‑use delivery for inspection workflows Delivered complete with a calibration block and a werkmessprotokoll (test report), the instrument supports traceability and immediate inclusion in quality documentation. The package also contains a USB cable, power adapter and a standard transducer, while 2x Li 18650 batteries (included) ensure mobility. The operating temperature span of -20°C to 50°C accommodates cold stores and heated production areas alike, so calibration and field verification can be carried out wherever required without extra tooling. For reliable thickness measurement with Filetta accuracy, contact Metav Werkzeuge in Emmerich for tailored advice or to place an order via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS910.480 Manufacturer: Filetta Design: Digital Measurement range: 1.5–200 mm Resolution / reading: 0.01 mm Accuracy: 0.01 Protection class: IP65 Operating temperature: -20°C to 50°C Display: LCD with backlight Power: 2x Li 18650 batteries (included) Accessories: USB cable; power adapter; calibration block; test report; standard transducer Special feature: magnetic transducer face Suitable materials: steel; cast iron; aluminium; copper; brass Facts Measurement principle: ultrasonic time‑of‑flight Weight: see manufacturer data SKU: MS910.480 Special features Ready for workshop use Traceable calibration with test report Portable, battery‑powered operation Robust casing for industrial environments FAQ What measurement range does the MS910.480 cover? The MS910.480 ultrasonic thickness gauge measures from 1.5 mm up to 200 mm, enabling inspections from thin sheets to substantial metal parts. Which materials can be measured with this gauge? The instrument is suitable for steel, cast iron, aluminium, copper (natural copper) and brass, as stated in the product specification. Is the device delivered calibrated and with documentation? Yes, the supplied package includes a calibration block and a werkmessprotokoll (test report) to support traceability in inspection records. How is the MS910.480 powered and what is included for data transfer? Power is provided by 2x Li 18650 batteries (included) and data transfer is possible via the supplied USB cable. Can the gauge be used in harsh workshop conditions? The unit has an IP65 rating and an operating temperature range of -20°C to 50°C, making it robust for many industrial environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com