300x6 Measuring Bridge Adjustable And Slideable - Filetta
Product information "300x6 Measuring Bridge Adjustable And Slideable - Filetta"
Take advantage of a compact, low‑profile attachment that adds a precise measuring surface and flexible positioning to special calipers; the combination of a 15 mm height, measuring faces 300 x 6 mm and an attachable, movable design streamlines inspection tasks in confined or awkward geometries. Order via Metav Werkzeuge or consult their specialists for application advice.
Measuring bridge – attachable, movable accessory for special calipers by Filetta
The measuring bridge is an attachable and movable accessory designed to extend the measuring capabilities of specialty calipers for workshop inspection, fixture setup and quality checks.
- Attachable and movable design
- Measuring faces 300 x 6 mm
- Compact 15 mm height profile
Extend reach and capability without new instruments
A compact measuring bridge adds a stable, repeatable contact surface to existing special calipers, allowing the measurement of recessed or wider features without changing the baseline instrument. The measuring faces (300 x 6 mm) provide a long, narrow contact suited to slot and step measurements, while the low 15 mm height keeps the assembly slim and easy to position. This extension reduces the need for multiple instruments and speeds up inspection workflows by enabling more measurements to be taken with a single calibrated tool.
Precision where space is limited
Engineered for practical precision, the accessory transfers the caliper’s reference plane to areas that are otherwise hard to access. A slim profile and narrow faces help to minimise tilt and measurement error when working in confined spaces; the design prioritises stiffness over length to preserve reproducibility. The result is consistent dimensional data that supports precise set‑ups and reliable quality control, making the bridge a pragmatic choice for machine shops and tooling departments that require accurate results without complex fixtures.
Simple handling and workshop integration
The bridge is designed for easy mounting and fine repositioning on the host caliper, so adjustments can be made quickly during iterative checks or tool set‑up. Its movable configuration supports flexible measuring scenarios, from step and depth checks to distance transfers between features. As an accessory compatible with special calipers, it widens the practical use of existing measuring equipment and keeps the test procedure straightforward — a time‑saving asset for routine inspection cycles.
For application guidance or to order the Filetta measuring bridge, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — specialists will advise on fit and delivery
Technical data
- Article number: MS910.499
- Manufacturer: Filetta
Facts
- Height: 15 mm
- Measuring faces: 300 x 6 mm
Special features
- Attachable to special calipers
- Movable/adjustable positioning
- Slim, low‑profile contact surface
FAQ
What is the primary use of this measuring bridge?
The measuring bridge is intended as an attachable accessory for specialty calipers to measure recessed features, steps and long narrow surfaces where direct caliper jaws cannot reach.
Is the bridge compatible with standard calipers or only special models?
Compatibility depends on the caliper geometry; the bridge is designed for use with special calipers and similar workshop measuring tools and may require a matching mounting interface.
Does the measuring bridge change the measurement reference of the caliper?
Yes, when fitted the bridge establishes a new contact plane via its faces (300 x 6 mm) so measurements reflect the transferred reference; users should account for any offset in documentation.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Passend für
Precision, flexibility and a clear digital readout combine to support consistent depth measurement in workshop and inspection tasks — ±0.03 mm accuracy, interchangeable probes and a mm/inch digital display ensure dependable results. Order the MS910.497 depth caliper directly via Metav Werkzeuge or contact our consultants for application guidance. MS910.497 Depth Caliper by Filetta — digital depth measuring instrument with interchangeable probe set The MS910.497 Depth Caliper is a digital depth-measuring instrument designed for workshop and inspection environments, offering a versatile probe system and a measuring range suitable for standard machining and assembly tasks up to 300 mm. Digital display with mm/inch readout Interchangeable probes incl. disc and pin Measurement range 0–300 mm for standard use Supplied in protective transport case Engineered for standard workshop precision and repeatability This instrument is classified for the standard measuring range (up to 0–300 mm), delivering the balance of reach and stiffness typically required in general machine and metalworking shops. With a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the device provides reliable, quantifiable results for repetitive tasks such as depth checks on housings, bore steps and assembled components. These measurable specifications support traceable inspection routines and reduce uncertainty in dimensional control, which is especially valuable where reproducibility across shifts or operators is required. Versatile probe system adapts to varied depth tasks A set of interchangeable probes expands measurement capability beyond a single contact geometry: the package includes a hook and a double hook for edge engagement, a disc probe Ø30 mm for broad-surface contact and a measuring pin Ø3 mm for narrow bores or recesses. This modular approach minimises the need for separate instruments and accelerates changeover between measurement tasks. The ability to select the most suitable probe improves contact stability and thus measurement consistency when dealing with different component shapes and surface conditions. Clear digital operation and robust handling features The caliper’s digital display supports mm/inch switching and features ABS/INC and Reset/Preset functions for flexible zeroing and comparative measurement workflows. Operation is powered by a V357 battery, providing simple, serviceable power replenishment. A dedicated lock screw secures the sliding carriage to maintain a set reading during transport or when transferring measurements, reducing human error. These elements together streamline inspection steps and speed up routine measurements with a focus on operator efficiency. Protected supply and seamless workshop integration Supplied in a protective transport case, the instrument is ready for safe storage and mobile use across workstations. The compact handling characteristics and included probe set make the tool suitable as a single-item solution for depth measurement needs in inspection benches and on the shop floor. As a special-depth caliper designed for practical use, the MS910.497 integrates into existing measuring procedures and complements standard caliper fleets, offering tangible improvements in versatility without adding complexity. Contact Metav Werkzeuge for a specification review of the Filetta MS910.497 depth caliper and arrange delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical data Article number: MS910.497 Manufacturer: Filetta Category: Special depth caliper Digital: Yes Display functions: mm/inch, Ein/Aus, ABS/INC, Reset/Preset Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Battery: 1x V357 Special features Interchangeable probes: hook, double hook, disc probe Ø30 mm, measuring pin Ø3 mm Lock screw for carriage fixation Supplied in protective transport case Suitable for workshop and inspection use FAQ Is the caliper suitable for general machine‑shop depth checks? The Filetta MS910.497 is designed for standard workshop use with a 0–300 mm range and an accuracy of ±0.03 mm, making it well suited to typical machine‑shop depth measurements. Can measurements be taken in inches as well as millimetres? Yes — the digital display supports switching between mm/inch, and includes ABS/INC and reset/preset functions for workflow flexibility. Which probes are included and are they interchangeable? The delivery includes a hook, a double hook, a disc probe Ø30 mm and a measuring pin Ø3 mm; all probes are interchangeable to match different contact geometries. Is a carrying case provided with the instrument? Yes — the caliper is supplied in a protective transport case to safeguard the instrument and accessories during storage and transit. What powers the digital electronics and how is it replaced? The device uses a V357 battery, which is readily replaceable to ensure uninterrupted operation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com