500mm Measuring Bridge Adjustable and Slideable, Measuring Faces 500x6mm - Filetta
Product information "500mm Measuring Bridge Adjustable and Slideable, Measuring Faces 500x6mm - Filetta"
The combination of a compact 15 mm profile, 500×6 mm measuring faces and an attachable, adjustable mounting delivers reliable medium‑range measuring capacity for workshop and fixture tasks; order the measuring bridge directly via Metav Werkzeuge or ask our consultants if needed.
Measuring bridge MS910.500 – attachable, adjustable bridge with 500×6 mm faces (Filetta)
A Measuring bridge MS910.500 designed as an attachable and sliding accessory for special calipers, intended to extend reach and improve repeatable positioning in medium‑format component inspection.
- Attachable and adjustable design
- Measuring faces 500×6 mm
- 15 mm low-profile beam
Precise medium-range measuring for workshop and toolroom tasks
The design targets the mid‑range measuring class, combining a low‑profile 15 mm beam with 500×6 mm measuring faces to bridge the gap between compact gauges and large‑scale instruments. Classified for medium‑range applications, this accessory is suited to fixtures, mould components and larger workpieces where reach and rigidity must be balanced. The measured geometry of the faces ensures consistent contact geometry and supports repeatable readings when paired with compatible calipers.
Flexible mounting that reduces setup time and increases throughput
An attachable and slideable configuration provides flexible positioning on the carrier caliper, enabling quick alignment without altering the base instrument. The sliding mount improves workflow by allowing fast repositioning along the 500 mm face length, which shortens setup cycles and reduces non‑productive time in repetitive measurement tasks. Built for stability, the accessory supports reliable contact during inside, outside and step checks when used within its intended range.
Workshop-ready design backed by Metav’s supply and advice
Offered as a practical extension for special calipers, the bridge is prepared for everyday industrial use and integrates smoothly into existing measurement stations. The component is identified by the MS910.500 code and the Filetta brand, providing a clear sourcing route. For buyers seeking confidence in delivery and application, Metav Werkzeuge combines broad product availability with technical guidance to support specification and installation decisions.
For application advice or to procure the Filetta MS910.500 measuring bridge with its 500×6 mm faces, contact Metav Werkzeuge in Emmerich for tailored assistance and ordering support.
Technical Data
- Article number: MS910.500
- Manufacturer: Filetta
- Designation: Measuring bridge
Facts
- Measuring faces: 500×6 mm
- Height: 15 mm
Special features
- Attachable and adjustable mounting
- Category: Special measuring calipers
FAQ
What measurement range does the bridge cover and how is it classified?
The bridge provides a 500 mm measuring face length and is classified in the medium‑range category, suited to larger fixture and mould components where a balance of reach and stiffness is required.
Which calipers are compatible with this bridge?
Compatibility depends on the caliper carrier geometry; the MS910.500 is designed as an attachable accessory for special calipers and mounts where a slide‑on connection and retention are provided.
Does the bridge support inside, outside and step measurements?
When used with an appropriate carrier caliper, the accessory supports the typical range of caliper functions, including inside, outside and step/shoulder measurements within its intended application range.
Is the measuring bridge suitable for production repeatability tasks?
Yes; the stable beam profile and defined measuring faces aid repeatable contact geometry, making the accessory suitable for production checks and routine inspection where mid‑range repeatability is required.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Passend für
Taking advantage of reliable digital readout, interchangeable probes and a robust transport case supports consistent depth measurement across workshop and fixture tasks. Order the Filetta depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Filetta Depth Caliper MS910.498 — Digital depth caliper with interchangeable probes, 0–500 mm range The Depth Caliper MS910.498 is a digital depth measuring instrument designed for medium‑range workshop applications such as fixtures, moulds and assembly checks. Digital mm/inch display with ABS/INC Interchangeable probes for diverse recesses 0–500 mm range for medium workshop tasks Supplied in transport case for safe handling Consistent medium-range depth measurement for workshop use The Filetta MS910.498 places medium-range capability at the centre of everyday metrology needs: the 0–500 mm range covers typical machine‑shop and toolroom tasks where reach and stiffness must be balanced. With a clear digital architecture and mechanical design tuned for repeatability, the caliper delivers reliable depth results on components, housings and cavities. The measured values are presented in a straightforward format that supports quality control protocols and reduces rework time. Adaptable probe set for awkward profiles and recesses Interchangeable probes expand the instrument’s practical scope: a hook, double hook, disc probe Ø30 mm and measuring pin Ø3 mm allow measurement of narrow slots, stepped depths, large bore depths and fine grooves respectively. This modular contact system saves time otherwise spent changing tools or adapting fixtures and ensures correct contact geometry for reproducible seating — especially useful when measuring components with mixed detail sizes. Clear digital reading and measurement reliability The electronic system provides mm/inch switching plus ABS/INC modes and Reset/Preset for process control. Key metrological data are 0.01 mm resolution and ±0.03 mm accuracy, which together define the instrument’s capability to resolve fine increments while maintaining industrial‑grade tolerance. The combination of high resolution and stable reading behaviour supports confident decision‑making during inspection and assembly operations. Workshop-ready handling and secure transport A locking screw secures the slider for stable readings and safe handling during transfer between workstations. Power is provided by a single V357 battery, minimising downtime with a common cell type. The depth caliper is supplied in a transport case, protecting the measuring faces and probes in transit and storage. These practical details contribute to dependable uptime and a lower risk of damage in daily workshop use. Contact Metav Werkzeuge to discuss the Filetta MS910.498 and arrange supply from our Emmerich stock — call +49 2822 7131930 or email info@metav-werkzeuge.com to request tailored measurement advice Technical data Article number: MS910.498 Manufacturer: Filetta Product type: Depth caliper Digital display: mm/inch, ABS/INC, Reset/Preset Battery: 1x V357 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display increment: 0.01 mm Special features Interchangeable probes: hook; double hook; disc probe Ø30 mm; measuring pin Ø3 mm Locking screw for stable readings Supplied in transport case for safe handling Digital unit suitable for workshop and inspection use FAQ What measuring range does this caliper cover? The Filetta depth caliper MS910.498 covers a 0–500 mm measuring range, placing it in the medium‑range class for workshop and fixture measurements. Which probe types are included and what are they for? The instrument includes a hook, a double hook, a disc probe (Ø30 mm) and a measuring pin (Ø3 mm); these probes adapt the caliper to measure slots, stepped depths, broad recesses and fine grooves respectively. How precise is the digital readout? The caliper provides a 0.01 mm resolution with an overall stated accuracy of ±0.03 mm, suitable for standard machine‑shop quality control tasks. Is the caliper ready for transport and workshop use? Yes; the device is supplied in a transport case and features a locking screw to secure the slider during movement and storage. What power source does the caliper use? The display is powered by a single V357 battery, which is commonly available and easy to replace. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com