The combination of a TiN-coated HSS cutting edge, a peeling geometry that reduces burrs, and a secure 9 mm shank with three flats ensures efficient holemaking in thin materials while minimising rework; order the TECWERK tool directly via Metav Werkzeuge or consult our specialists for size selection and delivery. TECWERK sheet metal peeling drill 5–31 mm — HSS with TiN coating TECWERK sheet metal peeling drill 5–31 mm — a specialised drill for clean holes in thin metals and plastics, featuring a peeling geometry and a 9 mm three-flat shank for reliable clamping TiN coating for extended tool life Designed for sheet metal and plastics 9 mm shank with three flats Peeling geometry for burr-free holes Cleaner holes through peeling geometry and reduced burrs The tool’s tapered, radially relieved cutting edges create a controlled peeling cut, which reduces material tearing and produces a superior hole edge in thin-gauge workpieces. The combination of HSS cutting material and a TiN coating improves wear resistance and retains sharpness during repetitive drilling, leading to fewer secondary operations such as deburring. This targeted geometry is particularly effective on sheet metal and also helps when working with various plastics, lowering the risk of melt or tear-out. Secure clamping and compatibility with standard drilling equipment A 9 mm shank with three flats ensures stable chuck engagement and prevents slippage under torque, so the tool can be used reliably in both bench and portable drills. The two cutting edges (Z=2) and a compact total length of 103 mm maintain a balanced tool run, while the 20° countersink angle facilitates a flush finish where chamfering is required. The design makes the drill suitable for routine shop use and easy integration into existing production routines without special adapters. Efficiency gains and predictable tool life With a pared-back design focused on function, the bit delivers predictable performance: the TiN coating reduces friction and heat build-up, extending service intervals and lowering tooling costs per hole. The dual-edge configuration offers consistent material removal and a stable cutting action, which typically reduces cycle time compared with standard twist drills when finishing thin materials. For operations where repeatability and minimised post-processing matter, this tool contributes to a smoother workflow and less scrap. Practical selection and application guidance Select the drill diameter according to the required finished hole size within the available range (5–31 mm). The peeling action means slower feed rates and steady spindle speeds often yield the best finish; speeds should be matched to the sheet thickness and type of material. The bit is described as a universal tool for sheet metal and plastics and is intended for use on standard drilling machines—no special equipment is needed. For production setups, the shank flats and HSS core help preserve concentricity during longer runs. For tailored advice on the TECWERK sheet metal peeling drill and fast delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 and our specialists will recommend the correct diameters and supply options Technical data Article number: 2000862047NW Label: Blechschälbohrer Bohrber.5-31mm HSS TiN Gesamt-L.103mm Z.2 TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Diameter range: 5–31 mm Total length: 103 mm Shank diameter: 9 mm Cutting edges: 2 Countersink angle: 20° Special features Material: HSS Coating: TiN Shank with three flats Peeling geometry with radially relieved cutting edges Universal tool for sheet metal and plastics Usable on any drill machine FAQ What materials is this drill suitable for? The TECWERK sheet metal peeling drill (SKU 2000862047NW) is optimised for thin sheet metal and works well on many plastics, offering clean holes with reduced burr formation. Can the bit be used in a handheld drill? Yes; the 9 mm shank with three flats provides secure clamping, so the TECWERK tool is compatible with handheld and bench drills designed to accept that shank size. How does the TiN coating improve performance? The TiN coating increases surface hardness and reduces friction, which improves wear resistance and prolongs cutting edge life under typical shop conditions. What finish can be expected straight from the drill? Thanks to the peeling geometry and 20° countersink angle, holes from this tool frequently require less deburring and present a burr-reduced, more finished edge compared with standard twist drills. Which shank diameter and clamping requirements apply? The shank diameter is 9 mm and the three flats are designed for secure clamping in standard chucks or collets that accept a 9 mm shank. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust, purpose‑built cutter that combines HSS‑Co durability with a wide 5–31 mm working range for consistent, burr‑reduced holes in thin materials; benefit from quick setup on conventional drills and reliable clamping with the 9 mm shank and three flats — order the tool directly via Metav Werkzeuge or consult the team for application advice. TECWERK sheet‑metal peel drill (5–31 mm) – HSS‑Co, 103 mm overall length The TECWERK sheet‑metal peel drill (5–31 mm) is a universal, two‑flute HSS‑Co tool designed for precise hole enlargement and finishing in sheet metal and plastics, usable on standard drill machines. Universal for sheet metal and plastics HSS‑Co cutting material for long tool life 5–31 mm working range for flexible use Shank with 3 clamping flats, 9 mm Faster, cleaner hole enlargement for thin components The combination of two flutes and the specially shaped, conically increasing blades produces a peeling cut that removes material by shaving rather than tearing. This geometry reduces burr formation and rework, which improves throughput and lowers scrap rates in repetitive tasks. With a working range of 5–31 mm and an overall length of 103 mm, the cutter is suitable for a variety of panel and sheet operations where repeatable, clean holes are required. Optimised cutting geometry for minimal finishing A 20° countersink angle and the radial relief of the cutting edges ensure that the tool enters and leaves the hole smoothly, leaving a consistent edge. The radial relief causes a controlled chip flow and steady cutting action, which is particularly beneficial when working with delicate laminates or thin‑gauge metals. This technical design translates into fewer downstream operations and a noticeable improvement in component appearance and fit. Simple clamping, broad compatibility with workshop drills The 9 mm shank with three clamping flats offers secure seating in chucks and collets, reducing slippage and run‑out during operation. As a universal tool, it can be used on conventional drill motors and production drilling units without special adapters, enabling quick tool changes and minimal setup time. The practical shank design helps maintain concentricity, which contributes to consistent hole sizes across batches. Robust material and predictable service life Manufactured from HSS‑Co, the cutter provides improved heat resistance and wear performance compared with plain HSS, making it a reliable choice for frequent use in workshop environments. The combination of material and cutting geometry supports steady performance over many cycles, contributing to dependable production flow and predictable maintenance schedules. For applications where consistent finish and low burrs matter, this tool offers a cost‑effective balance of performance and longevity. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK sheet‑metal peel drill into production or for assistance selecting the correct diameter range; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000862027NW Designation: sheet‑metal peel drill, 5–31 mm Manufacturer: TECWERK Packaging unit: 1 Facts Drilling range: 5–31 mm Overall length: 103 mm Shank diameter: 9 mm Number of cutting edges: 2 Countersink angle: 20° Special features Shank with 3 clamping flats Cutting material: HSS‑Co Conically increasing, radially relieved blades for a peeling cut Universal tool for sheet metal and plastics Usable on conventional drill machines FAQ What materials is the TECWERK sheet‑metal peel drill suitable for? The TECWERK sheet‑metal peel drill is intended primarily for sheet metal and various plastics, delivering clean holes with reduced burrs across these materials. How does the peeling cut improve hole quality? The conical blade profile and radial relief produce a peeling action that shaves material cleanly, so holes created with this cutter show fewer burrs and require less finishing than holes produced by conventional twist drills. What clamping is required for safe operation? A secure chuck or collet that accommodates the 9 mm shank and the three flats is recommended to minimise run‑out and ensure repeatable hole accuracy when using this cutter. Can the tool be used on any drill machine? Yes; the design allows use on standard drill motors and production drills without additional tooling, making it a flexible option for workshops and small production lines. Which feature ensures longer tool life under frequent use? The HSS‑Co cutting material provides enhanced heat and wear resistance, which supports longer service life and consistent cutting performance in routine applications. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from faster, burr-reduced holemaking thanks to the combination of HSS cutting edges and a 20° countersink angle, while the 9 mm shank with three clamping flats ensures secure mounting and repeatable results; order the TECWERK peel drill directly via Metav Werkzeuge or consult our advisors for specification support. Sheet-metal peeling drill 5–31 mm, HSS, 103 mm – TECWERK The sheet-metal peeling drill 5–31 mm is a universal peel-drill designed for precision holemaking and clean chamfering in thin metals and plastics, suitable for use on standard drilling machines. HSS cutting edges for extended life 20° countersink angle for clean chamfers 9 mm shank with three clamping flats Universal for sheet metal and plastics Reliable, burr-reducing holemaking for high throughput The tool delivers a peeling cut rather than a conventional shearing action, achieved by the conically increasing cutters that are radially re-ground. This results in consistently smaller burrs and improved edge finish, reducing post-process deburring time and lowering scrap rates. With two cutting edges made from HSS, the cutter maintains sharpness under typical workshop conditions and offers a balance of wear resistance and economical regrinding. The result is a measurable improvement in cycle time and quality control for repetitive sheet-metal operations. Secure clamping and machine compatibility for repeatable results A 9 mm shank fitted with three clamping flats enables firm seating in standard chucks and collets, reducing slippage and run-out during drilling sequences. At an overall length of 103 mm, the geometry provides good reach for countersinking while maintaining rigidity. Because the tool is designed for use on any common drilling machine, setup is straightforward and changeover is fast, supporting lean production and minimising downtime. Reliable clamping contributes directly to dimensional consistency and repeatability. Versatile use across sheet materials with precise chamfering Engineered primarily for sheet-metal work but also suitable for many plastics, the peel drill combines a 20° countersink angle with two flutes to produce clean chamfers and efficient chip evacuation. The universal application range makes the tool a practical choice for workshops that handle mixed-material batches, where one tool can replace multiple specialised cutters. For best results, match spindle speed and feed to the material; this approach yields burr-reduced holes and reduces secondary finishing, improving overall process economics and product appearance. For consistent, burr-free holemaking choose the TECWERK HSS peel drill and order via Metav Werkzeuge — contact our technical consultants at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice. Technical data Article number: 2000862037NW Designation: Sheet-metal peeling drill 5–31 mm, HSS, 103 mm Manufacturer: TECWERK Packaging unit: 1 Facts Drilling range: 5–31 mm Overall length: 103 mm Shank diameter: 9 mm Cutting edges: 2 Countersink angle: 20° Special features Cutting material: HSS Shank with 3 clamping flats Conically re-ground cutters for a peeling cut Universal tool for sheet metal and plastics Suitable for use on any drilling machine FAQ Which materials is this peel drill suitable for? The TECWERK sheet-metal peeling drill is intended primarily for sheet metals and is also suitable for many plastics, delivering clean holes and chamfers in thin material sections. What chuck or clamping size is required for secure use? A 9 mm shank with three clamping flats ensures secure mounting in standard chucks or collets; this reduces slippage and improves run-out stability when the tool is used on a drilling machine. How does the peeling cut affect burr formation? The conically re-ground cutters create a peeling cut that significantly reduces burr height compared with conventional drilling, which lowers the need for secondary deburring and improves edge quality. What are the key dimensions to plan for in a fixture? Plan for an overall length of 103 mm and a shank diameter of 9 mm; the drilling range of the tool covers 5–31 mm hole sizes. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining the durability of HSS cutting edges with practical workshop accessories, this set ensures reliable hole-making in sheet materials while reducing rework and downtime. Order the set directly via Metav Werkzeuge or contact our consultants for application-specific advice. RUKO Sheet-metal Countersink Drill Set — HSS, 3–30.5 mm ranges, 4-piece The RUKO Sheet-metal Countersink Drill Set is a compact workshop kit engineered for clean countersinking and hole enlargement in sheet materials and comparable thin substrates. HSS construction for high wear resistance Includes 3-flat shank for secure clamping 30 g cutting paste for improved performance Robust ABS plastic case for safe storage Consistent cutting performance for sheet work The set is built around HSS cutting edges that combine toughness with reliable edge retention, making the tools suitable for repetitive operations in thin metalwork. With hardened and precisely ground flutes, the cutters deliver a clean finish and reduced burr formation, which translates into less follow-up deburring and shorter processing cycles. The result is a toolset that supports steady productivity in small-batch production or maintenance tasks without frequent resharpening. Secure clamping and controlled chip formation A dedicated 3-flat shank provides improved axial and torsional grip in standard chucks and quick-change holders, reducing slippage during plunge cuts and countersinking. Supplied cutting paste (30 g) aids lubrication and chip evacuation on initial operations, helping to lower cutting temperatures and extend tool life. These features contribute to predictable tool behaviour and minimise the risk of workpiece distortion during delicate sheet operations. Practical kit design to keep the workshop moving Stored in an ABS case, impact- and break-resistant, the components remain organised and protected between jobs, shortening setup time and limiting tool loss. The compact layout and included consumable simplify routine maintenance: clean the cutters after use, reapply the supplied paste where appropriate, and return items to the cassette to preserve geometry. This combination of durability and practical storage supports a reliable workflow for engineering workshops and service departments. For precise ordering and tailored advice on the RUKO set, contact Metav Werkzeuge for product availability and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000601698NW Item name: Blechschälbohrersatz 3-14/5-20/16-30,5mm HSS 4tlg.ABS-Ku.-Kass.RUKO Packaging unit: 1 UID: 4000601698NW Data Diameter ranges: 3–14 mm; 5–20 mm; 16–30.5 mm Pieces: 4 Cutting paste: 30 g Special features Material: HSS Shank: 3-flat shank Case: ABS plastic cassette, impact- and break-resistant Accessories: cutting paste 30 g FAQ What materials is this set intended for? The RUKO sheet-metal countersink drill set (SKU 4000601698NW) is designed primarily for sheet materials and thin metalworking tasks where clean countersinking and hole enlargement are required. What is included in the kit? The set contains four HSS cutters plus a 3-flat shank and a 30 g tin of cutting paste, all supplied in an impact-resistant ABS plastic cassette (SKU 4000601698NW). Will the 3-flat shank work in a standard drill chuck? Yes, the 3-flat shank is intended for secure clamping and is compatible with standard drill chucks and many quick-change holders, improving grip and reducing slippage. How should the cutters be maintained for long life? Clean chips from the cutters after use, apply lubrication when appropriate using the supplied cutting paste, and store the components in the ABS cassette to protect cutting edges and geometry. Is the kit suitable for workshop and on-site service use? The combination of HSS cutters, a secure shank and a robust ABS case makes this RUKO set well suited to workshop environments and mobile service tasks requiring compact, durable tooling. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen

Take advantage of the combination of a shearing cut geometry, HSS construction and an 8 mm shank for consistently clean holes and reliable clamping in high-throughput sheet-metal work. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Sheet-metal peeling drill 4–20 mm HSS (71 mm, 2 flutes) – TECWERK The Sheet-metal peeling drill 4–20 mm HSS (71 mm, 2 flutes) is a universal drilling and countersinking bit designed for precise, chip-minimising boreholes and countersinks in thin sheet materials and plastics. Shaft with 3 clamping flats Conical cutting edges for shearing cut Countersink angle 20° for clean countersinks HSS, for sheet metal and plastics Precision and productivity for sheet-metal operations The drill is engineered to produce a shearing cut that reduces burr formation and rework. With its HSS cutting material and radially relieved, conically increasing cutting edges, the bit slices through thin metals rather than tearing them, which results in smoother hole edges and faster post-process handling. The combination of two flutes and a fine 20° countersink angle supports a controlled chip flow and consistent countersink geometry, so fewer secondary operations are required and production throughput improves. Secure clamping and machine compatibility A 8 mm shank with three clamping flats ensures firm retention in standard chucks and quick-change holders, reducing runout and wobble in repetitive tasks. The design is intended for use on any conventional drilling machine, allowing integration into existing workflows without specialised adaptors. The reliable shank interface and two cutting edges translate into predictable tool life and reduced downtime for bit changes, which is particularly valuable in batch production. Versatility across materials and applications Although optimised for sheet metal, the geometry also performs well in a range of non-ferrous and polymer materials, including certain plastics, making it a practical single-tool solution for mixed workshops. The universal nature of the bit reduces the number of tool changes on the shop floor and lowers inventory complexity while preserving the quality of drilled holes and countersinks across different substrates. Practical advantages and maintenance Maintenance is straightforward: the hardened HSS body tolerates regrinding for a number of resharpening cycles, and the conically stepped cutting edges maintain their beneficial shearing action after reconditioning. For operations seeking a balance of clean hole quality, simple handling and cost-effective tool life, this bit provides a pragmatic, performance-driven option that reduces downstream finishing and inspection effort. For procurement or technical guidance on applying the TECWERK sheet-metal peeling drill, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and supply options Technical data Article number: 2000862032NW Description: Sheet-metal peeling drill 4–20 mm HSS, 71 mm overall, 2 flutes Packaging unit: 1 Facts Drill diameter range: 4–20 mm Shank diameter: 8 mm Overall length: 71 mm Number of cutting edges: 2 Countersink angle: 20° Special features Material: HSS Shaft with 3 clamping flats Conically increasing, radially relieved cutting edges for shearing cut Universal tool for sheet metal and plastics Usable on any drilling machine FAQ What materials is this drill suitable for? The TECWERK sheet-metal peeling drill is optimised for sheet metal and is also suitable for a variety of plastics, offering a clean shearing cut in thin materials. How does the shearing geometry improve hole quality? The conical, radially relieved cutting edges produce a shearing cut, which reduces burrs and yields smoother hole edges compared with conventional twist drills. What clamping system is required for the shank? The bit features an 8 mm shank with three clamping flats, ensuring secure retention in standard chucks and quick-change holders. Can the drill be used on any drilling machine? Yes, the design permits use on conventional drilling machines, making it adaptable to most workshop setups. Is the material resharpenable? Made from HSS, the bit can be resharpened to extend service life while preserving its shearing performance. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from clean, burr‑free holes delivered by the conically rising, radially ground cutting edges combined with a durable HSS substrate and TiN coating for extended tool life; order the tool directly via Metav Werkzeuge or contact Metav’s consultants for tailored application advice. TECWERK sheet metal peeling drill, HSS TiN, 16–30.5 mm – 76 mm overall The TECWERK sheet metal peeling drill is a universal cutting tool designed for efficient holemaking and deburring in sheet metal and plastics, suitable for use on standard drill presses and handheld drilling machines. HSS substrate with TiN coating Two cutting edges for smooth shaving cuts 20° countersink angle for clean deburring 9 mm shank with three clamping flats Faster, cleaner holes with reduced finishing work The tool’s conically rising, radially ground cutting edges are engineered to produce a shaving cut rather than a pure chipping action, which results in clean, burr‑reduced holes and less secondary finishing. With two cutting edges and a defined 20° countersink angle, the drill creates a controlled chamfer while removing material smoothly; this reduces rework time and increases throughput in repetitive sheet‑metal operations. The construction from HSS with a TiN surface improves heat resistance and wear behaviour, maintaining cutting geometry over longer production runs. Secure clamping and versatile machine compatibility A 9 mm shank with three clamping flats ensures reliable torque transmission and minimises slippage in standard chucks and keyless holders, promoting repeatable concentricity and reduced runout. The overall length of 76 mm provides adequate reach for most bench and column drilling setups without compromising rigidity. The shank geometry allows straightforward integration into existing tool inventories, simplifying changeovers and ensuring consistent hole quality across different machines in the workshop. Durable finishing and appropriate application spectrum Manufactured from HSS and finished with TiN, the shaving drill balances edge toughness with surface hardness to extend service life under typical sheet‑metal use. The design is specified as a universal tool, primarily for sheet metal and also suitable for various plastics, making it a practical choice for mixed‑material workshops. As a result, stockholding can be reduced while maintaining access to a tool that produces burr‑minimised holes and integrated chamfers in one pass, supporting lean production and predictable part inspection outcomes. For application guidance or to obtain this TECWERK sheet metal peeling drill, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000862043NW Name: Blechschälbohrer; TECWERK Packaging unit: 1 Facts Drilling range: 16–30.5 mm Overall length: 76 mm Shank diameter: 9 mm Number of cutting edges: 2 Special features Material: HSS Coating: TiN Shank with three clamping flats 20° countersink angle Universal tool for sheet metal and plastics Usable on any drill machine FAQ What materials is this drill suitable for? The TECWERK sheet metal peeling drill is intended primarily for sheet metal and is also suited to various plastics, providing clean holes and reduced burr formation. What is the shank size and how is it held? The tool features a 9 mm shank with three clamping flats, allowing secure clamping in standard chucks and holders to reduce slippage and runout. What cutting geometry ensures a smooth finish? Conically rising, radially ground cutting edges combined with a 20° countersink angle produce a shaving action that yields cleaner holes and integrated chamfers. How does the TiN coating affect performance? The TiN coating on the HSS substrate increases surface hardness and wear resistance, extending cutting life under typical sheet‑metal working conditions. Is the drill compatible with hand drills as well as drill presses? Yes; the design is usable on a wide range of machines and is specified for use on both bench/column drills and suitable handheld drilling equipment. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS cutting material with TiN coating and a precise 20° countersink angle for fast, burr-free sheet-metal work; the shank Ø 10 mm with three clamping flats ensures secure grip and concentric running. Order this tool directly via Metav Werkzeuge or consult the team for application advice. TECWERK sheet-metal countersink drill – HSS TiN, 24–40 mm capacity, 89 mm length The TECWERK sheet-metal countersink drill is a universal HSS TiN tool designed for clean, burr-reduced holes in sheet metal and compatible plastics, suitable for use on standard drilling machines. HSS TiN coating for enhanced wear resistance For sheet metal and plastic applications Shank Ø 10 mm with three clamping flats 20° countersink angle for burr-free holes Faster, burr-free finishing for production-grade results The conically increasing, radially ground cutting geometry produces a peeling cut that reduces burr formation and minimises post-process deburring. Combined with the 20° countersink angle, this results in a cleaner hole profile and consistent chamfer quality, which lowers rework time and improves assembly fit. The use of HSS as the base material, paired with a TiN surface layer, extends service life under intermittent production loads while maintaining sharp cutting edges for precise hole edges. Robust design for reliable clamping and accurate runs Engineered for workshop use, the tool features two cutting edges and a shank Ø 10 mm with three clamping flats, improving torque transfer and concentricity in chucks and collets. The overall length 89 mm gives sufficient reach for standard panel work without sacrificing stiffness. These design choices ensure stable cutting behaviour, reduced vibration and extended tool life, translating into steadier hole diameters and repeatable results across jobs. Versatility across materials and machines As a universal tool the cutter performs well in a wide range of sheet-metal tasks and is also suitable for many plastics, making it a practical choice for small jobbing shops and production lines alike. Its configuration allows operation on virtually any drilling machine, delivering a balance between performance and operational simplicity. The reduced need for secondary finishing creates efficiency gains and supports smoother workflows on the shop floor. For dependable, burr-reduced sheet-metal finishing choose the TECWERK HSS TiN countersink — contact Metav Werkzeuge for procurement and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000862044NW SKU: 2000862044NW Manufacturer: TECWERK Facts Overall length: 89 mm Shank diameter: 10 mm Countersink angle: 20° Cutting edges: 2 Special features Cutting material: HSS Coating: TiN Shank with three clamping flats Radially ground, conically increasing blades for a peeling cut Universal for sheet metal and plastics Usable on any drilling machine Packaging unit: 1 FAQ Which materials can be machined with this countersink drill? The tool is intended for sheet metal work and is also suitable for many plastic applications; the HSS cutting material and TiN coating support a range of common workshop materials. What hole size range does the cutter cover? The cutter is designed to produce chamfered holes in the specified working range of 24–40 mm, delivering a controlled chamfer with a 20° countersink. How does the shank ensure secure clamping? The shank Ø 10 mm with three clamping flats provides improved grip and concentricity in standard chucks and collets, reducing slippage and runout. What are the maintenance and life advantages of the TiN coating? The TiN layer reduces abrasive wear and adhesion, extending tool life and helping to maintain cutting edge integrity during intermittent production use. Is the tool suitable for standard drilling machines? Yes, the cutter is usable on virtually any drilling machine, designed for straightforward integration into typical workshop setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS cutting quality, multiple step sizes and a secure three-flat shank for efficient sheet-metal production and reduced tool changes; order the product directly via Metav Werkzeuge or ask our consultants if needed. TECWERK sheet-metal step drill set, HSS, 3–14 / 4–20 / 16–30.5 mm TECWERK sheet-metal step drill set offers a compact cutting solution for producing a range of hole diameters in thin metal sheets and related fabrication tasks. High-speed steel HSS for durable cutting Step ranges 3–14, 4–20 and 16–30.5 mm Shank with three clamping flats Supplied in a plastic case Faster holemaking with fewer tool changes The stepped geometry enables production of several hole diameters with a single tool, which leads to reduced tool changes and a measurable improvement in machining throughput. Made from HSS, the set maintains cutting edge integrity for longer runs in thin materials, supporting predictable cycle times. For workshops focused on efficiency, this combination of versatile hole sizes and robust material properties improves process flow and minimises downtime. Secure clamping and tidy storage for workshop reliability A shaft designed with three clamping flats ensures positive grip in chucks and collets, reducing slippage and improving concentricity during drilling. The entire set is supplied in a plastic case, which supports orderly storage and transport between workstations. These practical features contribute to consistent hole quality and simplified tool management on the shop floor. Practical application guidance and compatibility Intended primarily for sheet-metal operations, the set is suited to drilling and enlarging holes where stepped diameters and rapid size changes are required. The stepped cutters perform best at appropriate spindle speeds and light feed for thin materials to avoid burring. Routine sharpening or replacement keeps performance optimal; the compact format supports mobile tool kits and bench setups, bringing dependable capability to assembly, maintenance and fabrication tasks. For a reliable supply of TECWERK step drills and expert advice from Metav Werkzeuge, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss suitability and immediate dispatch Technical data Article number: 2000862050NW Item designation: HSS sheet-metal step drill set 3–14 / 4–20 / 16–30.5 mm Packaging: Plastic case Shank: 3 clamping flats Unit: 1 UID: 2000862050NW Facts Step ranges: 3–14 mm; 4–20 mm; 16–30.5 mm Material: HSS Pieces: 3 Special features Plastic cassette (packaging) Shank with three clamping flats Packaging unit: 1 FAQ What hole diameters are covered by this set? The set covers stepped hole diameters in three ranges: 3–14 mm, 4–20 mm and 16–30.5 mm as supplied in the TECWERK sheet-metal step drill set (SKU 2000862050NW). What material are the cutters made from? The cutters are manufactured from high-speed steel (HSS), which provides wear resistance and edge retention suitable for sheet-metal drilling tasks. Is a case included for storage and transport? Yes, the drills are supplied in a plastic case (plastic cassette) for organised storage and safe transport. How does the three-flat shank improve performance? The shank with three clamping flats improves grip in chucks and collets, reducing slippage and enhancing concentricity for cleaner, more precise holes. How many pieces are in the set? The set contains three stepped cutters covering the stated diameter ranges. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the HSS‑TiN coating and the robust three‑clamp flat shank to boost drilling speed and tool life; the compact plastic cassette keeps the set organised and ready for workshop use. Order the set directly via Metav Werkzeuge or ask the Metav consultants for application advice. TECWERK sheet metal step drill set, HSS‑TiN, 3‑piece (3–30.5 mm ranges) The TECWERK sheet metal step drill set is a three‑piece solution for precise hole making and fast deburring in thin metal workpieces, supplied in a practical plastic cassette. HSS‑TiN coating for extended wear resistance Step coverage 3–30.5 mm across three drills Shank with 3 clamping flats for secure grip Supplied in a plastic cassette for tidy storage Faster, cleaner drilling for sheet‑metal production The set delivers consistent step diameters across three versatile ranges, enabling quick progression from pilot to final hole size without tool changes. The HSS‑TiN coating reduces friction and increases surface hardness, which lowers tool wear and supports higher cutting speeds in routine sheet‑metal tasks. For production environments, this translates into fewer interruptions, improved cycle times and a predictable finish quality on thin plates. The design reduces burr formation by producing more uniform cutting conditions, so time spent on secondary deburring is minimised and throughput is optimised. Stable clamping and reduced run‑out for precision results A shank with three clamping flats ensures reliable seating in chucks and adapters, reducing slippage and run‑out that can spoil hole geometry. Secure clamping means the bit maintains its concentricity during operation, which is particularly important when enlarging existing holes or stepping through multiple diameters. The three‑flat arrangement facilitates quick, repeatable setup in both standard chucks and quick‑change holders, supporting faster tool changes and a safer working environment. Accurate positioning leads to fewer rejects and less rework, improving overall efficiency on the shop floor. Practical storage, handling and workshop reliability The three‑piece kit comes held in a plastic cassette that keeps tools organised and protected between jobs, simplifying transport and storage at the bench. Compact storage reduces the risk of lost cutters and ensures the right size is at hand when needed. The set’s combination of durable coating and robust shank geometry means a long service life under typical sheet‑metal workloads, contributing to predictable maintenance intervals and cost‑effective operation. The brand’s focus on dependable workshop tools makes this set suitable for both trade and light industrial applications, where straightforward tool management and consistent performance are valued. For purchasing guidance or an assessment of suitability for specific materials, contact Metav Werkzeuge—refer to SKU 2000862055NW for precise advice and procurement; Metav’s experts will assist by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000862055NW UID: 2000862055NW Manufacturer: TECWERK Packaging unit: 1 Packaging: plastic cassette Shank: 3 clamping flats Core data Step ranges: 3–14 mm / 4–20 mm / 16–30.5 mm Pieces: 3 Special features HSS‑TiN coating Designed for sheet metal applications Supplied in plastic cassette Shank with three clamping flats FAQ What sizes are included in the set? The TECWERK sheet metal step drill set (SKU 2000862055NW) contains three step drills covering ranges 3–14 mm, 4–20 mm and 16–30.5 mm. What is the coating and why does it matter? The cutters feature an HSS‑TiN coating; this increases surface hardness and reduces friction, extending tool life and allowing higher cutting speeds in typical sheet‑metal work. Will the shank fit standard chucks and holders? Yes — the shank with three clamping flats provides a secure grip in standard drill chucks and many quick‑change holders, improving concentricity and reducing slippage during operation. Which materials is the set intended for? The set is designed for sheet metal and thin plate applications; it is optimised for clean holemaking and efficient step drilling in such materials. How should the drills be stored and maintained? Keep the tools in the supplied plastic cassette to protect edges and store them dry; clean chips after use and inspect cutting edges for wear to determine re‑grinding or replacement. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a compact, workshop-ready solution that combines HSS‑Co cutting performance, a secure three‑flat shank for reliable clamping and versatile hole sizes in one set; order directly via Metav Werkzeuge or contact the consultants for application advice. Sheet Metal Step Drill Set 3–14 / 4–20 / 16–30.5 mm, HSS‑Co (3 pcs) – TECWERK The Sheet Metal Step Drill Set 3–14 / 4–20 / 16–30.5 mm HSS‑Co (3 pcs) is a compact trio of step drills designed for efficient hole enlargement and clean entry in thin metalwork and maintenance applications HSS‑Co cobalt for high cutting performance Shanks with three clamping flats for firm grip Diameter ranges 3–14, 4–20, 16–30.5 mm covered Supplied in a plastic storage case Faster workflows and fewer tool changes with step geometry The set's HSS‑Co composition provides improved heat resistance and wear behaviour compared with standard high‑speed steels, which supports sustained performance during repeated hole enlarging tasks. The step geometry integrates several diameters in a single flute profile, allowing continuous enlargement of holes without changing tools; this reduces downtime and simplifies process planning in repair and light production environments. The diameter ranges 3–14 mm, 4–20 mm and 16–30.5 mm are arranged to cover common sheet‑metal requirements, enabling efficient progression from pilot holes to finished sizes. Reliable clamping for consistent hole quality Each bit features a shank with three clamping flats, which prevents rotation in the chuck and improves concentricity. Secure clamping reduces vibration and runout, resulting in cleaner hole edges and longer tool life. This mechanical stability is particularly relevant when working with thin materials where precision and a burr‑reduced finish matter; operators benefit from repeatable results and fewer rework cycles, improving overall workshop throughput. Practical storage and organisation to protect tools The set is supplied in a robust plastic storage case, designed for orderly storage and easy identification on a busy tooling board. The compact cassette protects cutting edges during transport and keeps the three‑piece set accessible at the point of use. Better organisation supports faster set‑up times and helps maintain serviceable condition for longer, lowering total operating effort and supporting a tidy workstation ethos. Clear use cases and straightforward handling for everyday tasks Step drills of this type are ideally suited to enlarging and deburring pre‑punched holes, producing clean entry holes in thin panels and performing temporary or permanent assemblies in maintenance, HVAC and fabrication tasks. The working principle is simple: progressive steps cut incrementally to the desired diameter, reducing torque spikes and the need for pilot reaming. With proper clamping and moderate feed rates, this tool trio delivers consistent hole quality and is an efficient complement to a small industrial or trade workshop's tooling set. Contact Metav Werkzeuge for tailored application advice and secure ordering of the TECWERK HSS‑Co step drill set — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitability for specific sheet‑metal tasks Technical data Article number: 2000862053NW Description: Sheet metal step drill set 3–14 / 4–20 / 16–30.5 mm HSS‑Co (3 pcs) Manufacturer: TECWERK Packaging unit: 1 UID: 2000862053NW Facts Pieces: 3 Diameter ranges: 3–14 mm; 4–20 mm; 16–30.5 mm Shank: 3 clamping flats Special features Material: HSS‑Co (cobalt high‑speed steel) Supplied in plastic cassette Shank with three clamping flats for secure chucking FAQ What materials are these step drills intended for? The TECWERK step drill set is optimised for sheet‑metal operations and similar thin‑gauge tasks where progressive hole enlargement and clean entry are required. How does the three‑flat shank influence performance? The shank with three clamping flats reduces rotation in the chuck, improving concentricity and producing more consistent holes with less vibration when using the TECWERK set. Is the set convenient for workshop storage and transport? Yes, the three‑piece set is supplied in a plastic cassette that protects cutting edges, simplifies identification and keeps tools organised for fast access. Can one tool replace several conventional drills? Step drills in this set combine multiple diameters in a single body, enabling the progressive enlargement of holes and reducing the need to change conventional twist drills during many sheet‑metal tasks. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS‑Co5 construction, broad diameter coverage and a robust storage solution for efficient, low‑downtime sheet‑metal production. Order the set via Metav Werkzeuge or consult our experts for application‑specific advice. RUKO sheet metal step drill set 3–14 / 5–20 / 16–30.5 mm, HSS‑Co5, 4‑piece (ABS case) RUKO sheet metal step drill set is a compact multi‑range solution for drilling and deburring thin metal panels in workshop and light industrial environments HSS‑Co5 for high wear resistance Three step ranges 3–14 / 5–20 / 16–30.5 mm Shank with 3 flats for secure clamping ABS cassette with 30 g cutting paste included Consistent hole quality and extended tool life for production runs Manufactured from HSS‑Co5, this cutter set delivers enhanced wear resistance and thermal stability compared with standard high‑speed steels. The cobalt alloy sustains sharper cutting edges for longer, which reduces the frequency of tool changes and contributes to a more predictable production flow. For operations where repeatable hole dimensions and surface finish matter, the combination of alloy composition and stepped geometry ensures neat, deburred apertures across a wide range of diameters while preserving machining time. Faster set‑up and reliable chuck grip reduce scrap rates The shank with 3 flats provides an immediate improvement in clamp stability, lowering the risk of slippage in standard chucks and torque‑transfer devices. Secure clamping minimises run‑out and vibration, which in turn improves concentricity and reduces heat build‑up at the cutting edge. The included 30 g cutting paste supports smoother chip evacuation and helps to control temperature during prolonged cycles, enabling longer uninterrupted runs and fewer rejects during sheet‑metal processing. Compact storage and maintenance that keeps workshops running Delivered in a shock‑ and break‑resistant ABS cassette, the set is organised for rapid tool selection and safe transport between bench and machine. The cassette protects cutting edges from incidental damage and prevents loss of small consumables, helping to reduce unplanned downtime. Regular application of the supplied cutting paste and correct storage in the cassette preserve tool geometry and reliability, simplifying maintenance routines and extending the effective service life of the cutters. Broad diameter coverage for flexible workshop applications With stepped diameters covering 3–14 mm, 5–20 mm and 16–30.5 mm, the set replaces multiple individual drills and suits a range of sheet‑metal tasks from pilot holes to larger access openings. The design supports work on common sheet materials and makes the set a practical choice for technicians who value adaptability without compromising on edge quality. For production or repair shops seeking a compact, resilient drilling solution, this cutter set offers a clear blend of performance and operational simplicity. Contact Metav Werkzeuge for tailored advice on the RUKO HSS‑Co5 sheet metal step drill set and secure supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000601699NW Name: Sheet metal step drill set 3–14 / 5–20 / 16–30.5 mm, HSS‑Co5, 4 pcs, RUKO Manufacturer: Ruko GmbH Packaging unit: 1 Core technical data Diameter ranges: 3–14 mm; 5–20 mm; 16–30.5 mm Number of pieces: 4 (3 cutters + cutting paste) Material: HSS‑Co5 (cobalt high‑speed steel) Cutting paste: 30 g Special features Shank with 3 flats for secure clamping Shock‑ and break‑resistant ABS cassette Packaging: ABS plastic cassette Includes 30 g cutting paste FAQ What materials is this step drill set suited to? The RUKO sheet metal step drill set is optimised for thin metal panels and common sheet‑metal applications; the HSS‑Co5 composition offers improved wear resistance for repeated drilling tasks. How does the shank design affect performance? The shank with 3 flats ensures a more secure clamp in standard chucks, reducing slippage and run‑out during machining with the RUKO set (SKU 4000601699NW). Is cutting lubricant included and why is it needed? Yes — the set includes a 30 g cutting paste to support chip evacuation and temperature control, which helps preserve the cutting edge and improve hole finish. Can the cutters be stored in the supplied cassette on site? The supplied ABS cassette is shock‑ and break‑resistant and designed for organised storage and safe transport between workbench and machine. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen

Combining HSS‑TiN durability with a secure three‑flat shank and an impact‑resistant ABS case, this set ensures reliable, burr‑reduced holes in sheet metal. Order the RUKO set directly via Metav Werkzeuge or ask our consultants for tailored advice. RUKO Sheet Metal Step Drill Set 3–14 / 5–20 / 16–30.5 mm, HSS‑TiN, 4‑piece A compact four‑piece step drill kit designed for clean hole enlarging and deburring in sheet metal applications HSS‑TiN coating for extended cutting life Shank with three flats for secure clamping Includes 30 g cutting paste for smooth drilling Impact‑resistant ABS case for safe storage Faster, cleaner holes with durable HSS‑TiN cutting edges Step drills are engineered to enlarge and de‑bur holes in thin materials without changing tools. The HSS‑TiN coating on these bits reduces friction and extends tool life, which translates directly into fewer tool changes and less downtime. With step ranges of 3–14 mm, 5–20 mm and 16–30.5 mm, the set covers a broad span of common hole diameters, enabling efficient work flows when producing multiple sizes from the same point. The step drill principle also produces a cleaner hole edge compared with conventional twist drilling, reducing the need for additional finishing. Consistent clamping and minimal run‑out for precision results A shank designed with three flats provides a positive seat in standard chucks and quick‑change holders, limiting slippage during operation. This secure mounting reduces radial run‑out, which helps to maintain concentricity and improves hole quality when working on thin metal sheets. The stable interface between drill and machine means fewer reworks and a predictable outcome across repetitive tasks. Where accuracy matters, mechanical features like the three‑flat shank make a tangible difference to the final fit of components. Workshop efficiency: practical kit and ready‑to‑use accessories The set is delivered as a four‑piece kit in an impact‑resistant ABS case, keeping tools organised and protected between jobs. Included with the drills is a 30 g cutting paste, which assists chip evacuation and reduces heat build‑up when drilling thin metal, prolonging tool life and improving surface finish. The compact cassette simplifies storage and transport, making these step drills a practical addition to a maintenance trolley or a production bench. The combination of consumable, cutting aids and protective casing streamlines the day‑to‑day workflow. Practical applications and recommended handling These step drills are optimised for sheet metal work and other thin materials where progressive hole enlargement is preferred. Typical users include workshop technicians, maintenance teams and metal fabricators who require a versatile set for on‑site adjustments or quick production tasks. For best results, operate at moderate speed with steady feed and apply the supplied cutting paste when working thicker or tougher sheet materials. Regular inspection for wear and prompt replacement of blunt tools will maintain performance and safety in the workplace. Choose the RUKO HSS‑TiN step drill set via Metav Werkzeuge for dependable drilling in sheet metal; contact Metav Werkzeuge for product selection advice and local availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000601700NW Description: Sheet metal step drill set 3–14 / 5–20 / 16–30.5 mm HSS‑TiN Manufacturer: Ruko GmbH Specifications Drill sizes: 3–14 mm; 5–20 mm; 16–30.5 mm Pieces: 4 Cutting paste: 30 g Shank: three flats Features HSS‑TiN coating Shank with 3 clamping flats Impact‑ and break‑resistant ABS cassette Supplied in protective plastic case FAQ What hole sizes are covered by the set? The set provides step ranges of 3–14 mm, 5–20 mm and 16–30.5 mm, enabling progressive hole enlargement across common sheet‑metal diameters. Is cutting lubricant included with the drills? Yes, the kit includes a 30 g tin of cutting paste to aid chip removal and reduce heat during drilling. What does the three‑flat shank mean for workshop use? A shank with three flats ensures secure clamping in chucks and quick‑change holders, reducing slippage and run‑out for more consistent holes. Can these step drills be stored in the supplied case? The tools are supplied in an impact‑resistant ABS case, designed to protect the drills and keep the set organised between jobs. Is the set suitable for heavy‑duty plate work? These drills are optimised for sheet metal and thin materials; for thicker plate work, consult application notes or Metav Werkzeuge for alternative tool recommendations. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen

Take advantage of the combination of HSS‑Co cutting material, a 20° countersink geometry and a secure 6 mm shank for consistent, burr‑reduced holes in thin materials; order the tool directly via Metav Werkzeuge or consult the technical team for application advice. TECWERK sheet‑metal peel drill (3–14 mm) – HSS‑Co, 58 mm overall length The TECWERK sheet‑metal peel drill 3–14 mm is a universal cutting tool for efficient holemaking and chamfering in thin metals and plastics, designed for use on standard drilling machines. HSS‑Co cutting material for high wear resistance 20° countersink angle for clean chamfering Universal for sheet metal and plastics 6 mm shank with three flats for secure clamping Consistent chip control through a peeling cut The combination of HSS‑Co as cutting material and the conically increasing, radially relieved cutting edges produces a peeling cut that reduces burr formation and improves hole quality in thin materials. The tool’s geometry, including a 20° chamfering angle and precisely ground flutes, minimises distortion in sheet work and lowers rework rates. For customers seeking repeatable results, this design reduces the need for secondary deburring and helps maintain production cadence without sacrificing edge integrity. Robust holding and compatibility with common machines Designed with a 6 mm shank featuring three flat faces, the drill ensures secure clamping in standard three‑jaw chucks and collets, preventing slippage at higher spindle speeds. The two‑flute arrangement balances cutting force and rigidity, enabling stable performance on bench drill presses and portable drilling units alike. The tool’s 58 mm overall length allows adequate reach in most setups while maintaining the stiffness required for clean penetration through sheet materials. Broad application range and time‑saving productivity This drill is specified for holes from 3 mm to 14 mm and is suitable for a wide spectrum of thin materials, notably sheet metal and various plastics. The radial back relief of the cutting edges supports controlled chip evacuation and reduces heat build‑up, which contributes to longer service intervals and improved tool life. In production environments where cycle time and surface quality are critical, the tool’s universal design reduces tooling variety and simplifies job setups, yielding measurable efficiency gains across repetitive tasks. For supply, compatibility checks or ordering, contact Metav Werkzeuge GmbH: info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and prompt delivery from Emmerich. Technical data Article number: 2000862021NW Brand: TECWERK Packaging unit: 1 Core data Cutting diameter range: 3–14 mm Overall length: 58 mm Shank diameter: 6 mm Number of cutting edges: 2 Countersink angle: 20° Special features Cutting material: HSS‑Co Shank with 3 flats for anti‑rotation Conically increasing, radially relieved cutting edges Universal tool for sheet metal and plastics Usable on standard drilling machines FAQ What materials can be machined with this drill? The TECWERK sheet‑metal peel drill (SKU 2000862021NW) is intended primarily for sheet metal and a wide range of plastics, with geometry optimised to reduce burrs and maintain edge quality. How does the tool achieve burr reduction on thin sheets? The HSS‑Co composition and the conically increasing, radially relieved cutting edges of the TECWERK peel drill produce a peeling action that minimises material deformation and lowers the need for secondary deburring. Is the shank compatible with standard chucks and collets? Yes, the drill’s 6 mm shank with three flats ensures secure clamping in typical three‑jaw chucks and collets, providing stable performance in common drilling setups. What makes this drill suitable for production use? The combination of HSS‑Co wear resistance, a two‑flute design and an efficient chip‑control geometry gives the TECWERK sheet‑metal peel drill reliable tool life and consistent hole quality, supporting repetitive production tasks. Are larger or smaller diameters available within the same design principle? The current item (2000862021NW) covers the 3–14 mm range; variations in diameter that use the same peel‑cut geometry are offered under related product lines by TECWERK and can be recommended on request. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust HSS construction and TiN surface combined with a 20° countersink geometry for efficient, burr-minimising performance in sheet-metal and plastic work. Order directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK Sheet-Metal Countersink Drill 3–14 mm, HSS TiN, 58 mm Overall Length The TECWERK Sheet-Metal Countersink Drill 3–14 mm is a universal HSS TiN-coated drill designed for fast, burr-reducing hole preparation and countersinking in thin metal and plastic panels. HSS TiN coating for extended life Conical, radially honed cutting edges Countersink angle 20° for clean deburring 6 mm shank with three flat surfaces Efficient holemaking and clean edges for production workflows The tool delivers reliable results through its HSS core and TiN surface, which together extend tool life and maintain cutting performance under frequent use. The conical, radially honed geometry produces a controlled peeling cut, significantly reducing burr formation and the need for secondary deburring operations. For industrial and workshop environments where throughput and consistency matter, this tool supports a smoother production flow and fewer rework cycles. Versatility across materials and machines Designed as a universal tool, the drill is effective on sheet metal and on a range of plastics, owing to the balanced combination of cutting geometry and material grade. The 6 mm shank includes three flats to prevent slippage in the chuck, making the tool compatible with standard bench and hand-held drills. The two cutting edges and the specified 20° countersink angle enable simultaneous hole enlargement and chamfering, which shortens cycle time on mixed-material jobs. Practical design that supports workshop safety and quality The tool’s construction aims to deliver burr-minimised holes that improve part fit and finish. The radially honed cutting edges distribute cutting forces evenly and reduce chatter, while the TiN layer helps resist wear and heat build-up. These characteristics contribute both to operator confidence and to a measurable improvement in repeatability—especially valuable in small-batch production or maintenance settings where consistent hole quality is required. Easy integration and handling in daily use With a total length of 58 mm and a compact shank diameter, the drill fits easily into common tool holders and is simple to change between operations. The combination of two cutting edges and the three-flat shank offers stable rotation and predictable chip evacuation, which reduces the risk of snarled chips and improves cycle security. For workshops seeking dependable consumables that limit downtime, this robust countersinking drill is a practical choice. Contact Metav Werkzeuge for tailored application advice and to secure the TECWERK sheet-metal countersink drill with dependable supply from Emmerich. Technical data Article number: 2000862041NW Article name: Blechschälbohrer Bohrber.3-14mm HSS TiN Gesamt-L.58mm Z.2 TECWERK Brand: TECWERK Packaging unit: 1 Facts Shank diameter: 6 mm Overall length: 58 mm Countersink angle: 20° Cutting edges: 2 Special features Material: HSS Coating: TiN Shaft with three flat surfaces Conical, radially honed cutting edges for peeling cut Universal application: sheet metal and plastics Usable on standard drills FAQ Is this drill suitable for thin steel sheets? The TECWERK sheet-metal countersink drill is suitable for thin steel sheets; its HSS construction and honed cutting geometry reduce burrs and support clean hole edges. Can the drill be used in a standard hand-held cordless drill? Yes, the 6 mm shank with three flats makes the drill compatible with standard chucks on hand-held and bench drills. What benefit does the TiN coating provide? The TiN coating increases surface hardness and reduces friction, which helps extend tool life and improves thermal resistance during continuous use. Does the tool also work for plastics? The design is optimised for mixed use; plastics are listed among suitable materials due to the peeling-style cut and the controlled chip formation. How does the 20° countersink angle affect the result? A 20° countersink angle produces a shallow chamfer and effective deburring, which is helpful when preparing holes for rivets or achieving a neat edge finish. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of clean, burr‑free holemaking and broad material compatibility for fewer rework cycles and steadier productivity; order directly via Metav Werkzeuge or contact our advisors for technical guidance. TECWERK sheet‑metal peel drill 3–14 mm HSS, 58 mm overall length A TECWERK sheet‑metal peel drill engineered for rapid, burr‑reduced holes in thin metals and technical plastics, suitable for use on standard drilling machines. 3 clamping flats for secure grip Two cutting edges, 20° countersink angle Conical geometry for a peeling cut Suitable for sheet metal and plastics 6 mm shank, HSS, 58 mm overall length Faster, cleaner results for thin‑metal workpieces The tool’s defining advantage is its conical cutting geometry, which is radially relieved to produce a true peeling cut rather than a pure shearing action. This geometry, combined with the two cutting edges and the shallow 20° countersink, reduces burr formation and minimises the need for secondary deburring. For production environments that value throughput and consistent hole quality, this means less time spent on rework and a smoother workflow when processing panels, housings or thin‑walled components. Versatility across materials and machines Designed as a universal tool, the drill performs reliably in sheet metal and in many plastics, making it a flexible option for mixed‑material workshops. The 6 mm diameter shank with three clamping flats ensures a secure grip in standard chucks or quick‑change holders, so the tool can be used on bench drills, pillar drills and fixed drilling stations without adaptation. For technicians unfamiliar with the term, the peeling action refers to the way the cutter removes a thin layer progressively, which is gentler on edges and reduces heat buildup compared with aggressive plunge drilling. Practical design for routine production and tool handling With a compact 58 mm overall length and construction in HSS, the cutter balances stiffness and wear resistance for typical sheet‑processing tasks. The short overall length improves concentricity and reduces chatter risk in light‑duty setups, while the HSS cutting material provides a dependable service life under normal operating feeds and speeds. The presence of three flats on the shank supports repeatable clamping orientation, helping to preserve cutting geometry and ensuring consistent hole quality across a batch. Choose the TECWERK sheet‑metal peel drill for efficient, burr‑reduced holemaking and contact Metav Werkzeuge for order and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000862031NW Product name: Blechschälbohrer 3–14 mm HSS, Gesamt‑L. 58 mm Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 6 mm Total length: 58 mm Cutting edges: 2 Countersink angle: 20° Cutting material: HSS Special features Shaft with 3 clamping flats Conically increasing, radially relieved cutting edges Peeling cut for reduced burrs Universal tool for sheet metal and plastics Usable on any drilling machine FAQ What materials is the drill suitable for? The TECWERK sheet‑metal peel drill (SKU 2000862031NW) is intended for sheet metal and a range of plastics, offering clean holes and reduced burr formation. How does the peeling cut improve hole quality? Radial relief and the conical cutting geometry create a peeling action that removes material progressively, which reduces edge rollover and the need for secondary deburring. Can the drill be used in handheld drills? Yes; the 6 mm shank with three clamping flats allows secure clamping in standard chucks, making it suitable for both handheld and stationary drilling machines, provided machine rigidity is maintained. What benefits do the 3 clamping flats offer? The flats prevent slippage and enable repeatable orientation in the chuck, supporting consistent cutting geometry and longer effective tool life under routine conditions. Is special coolant or lubrication required? For thin metals and typical plastics, standard cutting fluids or light lubrication can be used to extend tool life; specific conditions should be matched to material and feed/speed settings. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS cutting steel, a TiN coating and a two‑flute geometry for consistent, burr‑reduced holes in sheet metal and plastics; secure supply and technical advice via Metav Werkzeuge for seamless workshop integration. TECWERK sheet metal countersink drill Ø 4–20 mm, HSS TiN, L 71 mm The TECWERK sheet metal countersink drill is a two‑flute HSS tool with TiN coating and a 20° countersink angle, engineered for efficient peeling cuts in thin metal and plastic on standard drilling equipment. 8 mm shank with three flats Two cutting edges for clean chips 20° countersink angle for controlled deburring TiN coating for extended tool life Faster, cleaner drilling with a peeling cut geometry The tool’s two‑flute geometry and radial relief on the cutting edges produce a peeling cut rather than a pure shear action, which reduces burr formation and the need for secondary finishing. The combination of HSS base material and TiN coating ensures a balance between toughness and wear resistance; TiN acts as a low‑friction barrier that lengthens tool life under mixed‑material conditions. For production environments where consistent hole quality impacts assembly times, this design lowers rework rates and contributes to predictable cycle times. Compatibility and practical benefits across machines and materials A straight 8 mm shank with three flats gives secure clamping in standard chucks and collets, enabling use on bench drills and portable machines alike. The usable diameter range 4–20 mm and overall length 71 mm make the tool a versatile choice for multi‑purpose workshops. Its universal character means fewer tool changes when alternating between sheet metal and engineering plastics, which improves workflow efficiency and reduces inventory complexity without compromising performance. Design features that support productivity and operator safety The specified 20° countersink angle facilitates controlled deburring while the two cutting edges produce consistent chip formation, simplifying chip evacuation and reducing heat build‑up. Radial undercutting on the flanks promotes a true peeling action, lowering cutting forces and making the tool suitable for thin material where distortion must be minimised. These attributes translate into measurable benefits: shorter cycle times, fewer scrapped parts and a safer, cleaner working area. For tailored advice on integrating the TECWERK sheet metal countersink drill into existing production processes or for assured supply from Emmerich, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000862042NW SKU: 2000862042NW Label: Blechschälbohrer Bohrber.4-20mm HSS TiN Gesamt-L.71mm Z.2 TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Diameter range: 4–20 mm Overall length: 71 mm Shank diameter: 8 mm Cutting edges: 2 Countersink angle: 20° Special features Material: HSS Coating: TiN (titanium nitride) Shank with 3 flats Radially undercut, conically increasing cutting edges for a peeling cut Universal tool for sheet metal and plastics Suitable for use on any drill machine FAQ What materials is this countersink drill suitable for? The TECWERK sheet metal countersink drill is designed for sheet metal and also performs well with many plastics, thanks to its HSS substrate and TiN coating. How does the TiN coating benefit tool life? TiN (titanium nitride) reduces friction and wear on the cutting edges of the TECWERK tool, extending life and maintaining hole quality over longer production runs. Can this drill be used in handheld drills as well as bench machines? Yes, the 8 mm shank with three flats provides secure clamping for use on standard bench drills and portable machines. What quality of hole finish can be expected from the two‑flute design? The two‑flute geometry and radial relief produce a peeling cut that minimises burrs, resulting in a cleaner hole and reduced need for secondary finishing. Is the tool suitable for high‑volume production? The combination of HSS, TiN coating and a burr‑reducing cutting geometry makes this tool well suited to repetitive tasks where consistent hole quality is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co cutting material, a secure 8 mm shank with three flats, and a radially relieved, conically rising geometry that produces a clean, peeling cut in sheet materials; order directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK sheet-metal peeling drill 4–20 mm, HSS‑Co, 71 mm overall length The TECWERK sheet-metal peeling drill is a universal two‑flute twist drill engineered for burr‑reduced holes in sheet metal and plastics, suitable for standard drill rigs. HSS‑Co cutting material for extended life 8 mm shank with three flats for secure clamping 20° countersink angle for burr‑free hole edges Achieve clean, burr‑reduced holes for faster assembly The tool’s defining feature is its radially relieved, conically rising cutting edges, which create a controlled peeling cut rather than a conventional chipping action; this reduces burr formation and minimises the need for secondary deburring operations. The result is a measurable improvement in throughput and consistent hole quality in thin materials. The HSS‑Co grade provides wear resistance under elevated cutting temperatures, so cycle times remain stable even in production environments. Secure clamping and repeatable concentricity A smooth production flow depends on tool stability. The 8 mm shank with three flats ensures reliable torque transmission and prevents slippage in standard three‑jaw chucks and quick‑change holders. With two cutting edges and a balanced geometry, runout is reduced and hole position repeatability improves, which supports automated workflows and reduces rejected parts. These mechanical advantages translate directly into less downtime and fewer quality checks per batch. Versatility across materials and machines Designed as a universal tool, the drill performs well on a variety of thin materials: primarily sheet metal, but also many plastics. The 20° countersink geometry forms clean edges that are beneficial for rivet or fastener seating and for components that will be painted or surface‑treated. Compatibility with conventional drill machines makes integration into existing shops straightforward, avoiding costly fixture changes. Practical specification that supports shop planning With an overall length of 71 mm and a drilling range from 4 mm to 20 mm, the drill is sized for general workshop and light‑industrial applications. The combination of HSS‑Co cutting material and the peeling geometry supports longer tool life and fewer tool changes, which simplifies inventory decisions and reduces indirect labour costs. Where predictable, repeatable hole quality is required, this tool contributes to leaner production processes. For tailored recommendations on integrating the TECWERK sheet‑metal peeling drill into a production line or workshop, contact Metav Werkzeuge for precise advice and supply from our Emmerich facility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000862022NW Manufacturer: TECWERK Packaging unit: 1 Facts Drilling range: 4–20 mm Overall length: 71 mm Shank diameter: 8 mm Cutting edges: 2 Countersink angle: 20° Shank flats: 3 Special features Cutting material: HSS‑Co Conically rising, radially relieved cutting edges Produces a peeling cut for reduced burrs Universal tool for sheet metal and plastics Usable on standard drilling machines FAQ What materials is this drill suitable for? The TECWERK sheet‑metal peeling drill is intended mainly for sheet metal and is also suitable for many plastics due to its peeling geometry and HSS‑Co cutting material. How does the peeling cut improve hole quality? By producing a peeling action rather than conventional chipping, the tool reduces burr formation and creates cleaner edges, which lowers the need for secondary deburring on the TECWERK drill. What clamping is required for reliable operation? Secure clamping in a chuck or holder that accommodates an 8 mm shank with three flats is recommended to prevent slippage and ensure concentricity when using this TECWERK tool. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the robust HSS‑Co cutting material together with the two cutting edges and the three‑flat shank for reliable, burr‑reduced countersinking in thin materials; order the tool directly via Metav Werkzeuge or consult the advisers for application support. Sheet Metal Countersinking Drill 16–30.5 mm HSS‑Co, 76 mm – TECWERK The sheet metal countersinking drill 16–30.5 mm is a two‑flute HSS‑Co tool designed for precise hole enlargement and countersinking in sheet metal and plastics for workshop and light industrial use Shank with three clamping flats Two cutting edges for smooth chip removal HSS‑Co for enhanced wear resistance Ideal for sheet metal and plastics More throughput through a peel‑cut geometry The TECWERK countersinking tool combines a peel‑cut geometry with a conically increasing cutting edge to reduce cutting forces and improve chip evacuation. The HSS‑Co substrate provides higher red‑hardness and wear resistance compared with standard high‑speed steel, which translates into longer tool life and fewer interruptions. This design lowers the risk of heat build‑up and workpiece distortion, making the tool economically attractive for repetitive tasks in fabrication and maintenance. Reliable clamping and machine compatibility A 9 mm shank with three clamping flats ensures secure seating in standard chucks and quick‑change holders, preventing slippage during higher torque operations. The two‑flute layout balances cutting action and stability, offering a controlled feed that reduces chatter on portable drills and drill presses. The total length of 76 mm maintains an effective working reach while remaining compact enough for bench and hand‑held applications. Clean results on sheet metal and plastics The tool’s 20° countersink angle and radially ground cutting lips are tuned to produce a shaved, burr‑reduced finish on thin materials. In practice, this means fewer secondary deburring steps after drilling, particularly when working with common sheet metals and softer plastics. The result is improved component appearance and a faster transition from drilling to assembly or finishing operations. Practical handling and universal application Marked by a universal application profile, the drill is suited to everyday workshop tasks where versatility matters: from light structural panels to non‑ferrous components made of plastics. The combination of HSS‑Co, two cutting edges and the three‑flat shank supports stable performance in mixed production environments, reducing tool changes and simplifying tooling logistics across jobs. For proven countersinking performance from TECWERK, order via Metav Werkzeuge and contact our technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 for specific machining recommendations and stock information Technical data Article number: 2000862023NW Manufacturer: TECWERK Packaging unit: 1 Label: Blechschälbohrer Bohrber.16-30,5mm HSS-Co Gesamt-L.76mm Z.2 TECWERK Facts Diameter range: 16–30.5 mm Total length: 76 mm Shank diameter: 9 mm Countersink angle: 20° Number of cutting edges: 2 Cutting material: HSS‑Co Special features Shank with three clamping flats Conically increasing, radially ground cutting edges Produces a peel‑cut for reduced burr formation Universal tool for sheet metal and plastics Usable on standard drill machines FAQ What materials can be processed with this countersinking drill? The countersinking drill is designed primarily for sheet metal and various plastics; the HSS‑Co composition supports common fabrication alloys and softer engineering polymers. Is the shank compatible with common drill chucks? Yes, the 9 mm shank with three clamping flats provides secure seating in standard chucks and quick‑change holders to avoid slippage under load. How does the peel‑cut geometry affect finishing? The conically increasing, radially ground edges create a peeling action that reduces burr formation, resulting in cleaner holes and less post‑processing. Can the tool be used on portable drills? The tool’s two‑flute design and secure three‑flat shank make it suitable for both drill presses and hand‑held machines, provided the machine offers adequate rigidity. What maintenance is recommended to extend tool life? Periodic inspection for wear and light regrinding when appropriate will maintain performance; the HSS‑Co substrate improves temperature resilience but does not eliminate normal wear. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS cutting edges, a 20° countersink angle and a secure Ø 9 mm shaft with three clamping flats for reliable chamfering and fast, low-deformation holemaking; order the tool directly via Metav Werkzeuge or consult our specialists for tailored application advice. TECWERK sheet-metal countersink drill — 16–30.5 mm, HSS, 76 mm overall length The TECWERK sheet-metal countersink drill is a universal drilling and countersinking solution that delivers a radial, peeling cut for clean holes in sheet metal and plastics and is compatible with standard drill machines. Drilling range 16–30.5 mm High-speed steel (HSS) cutting material 20° countersink angle for precise chamfers Shaft with three clamping flats, Ø 9 mm Clean, repeatable holes in sheet metal and plastic The tool is designed to provide consistent results across a wide drilling range (16–30.5 mm) while maintaining low distortion in thin materials. The HSS cutting material offers toughness and heat resistance so that the cutter keeps geometry under typical workshop loads; this converts into fewer reworks and predictable part quality. For operators working on enclosures, brackets or panels, the combination of cutting geometry and material reduces burr formation and simplifies downstream finishing. The benefit of a radial, peeling cut for faster cycles Conically increasing cutters with radial relief create a peeling cut that slices material away rather than ploughing, which lowers cutting forces and minimises workpiece deformation. The 20° countersink angle produces accurate chamfers suitable for flush fastenings and rivets, enabling faster assembly and improved part fit. This efficient cutting action supports higher feed rates and contributes to throughput gains in repetitive drilling and countersinking operations. Secure mounting and reliable handling in any workshop A Ø 9 mm shaft fitted with three clamping flats guarantees a firm grip in chucks and quick-change holders, reducing runout and vibration. The tool’s 76 mm overall length offers sufficient reach for most panel tasks while remaining compact enough for handheld drilling units. Together, these design choices promote operator confidence, shorter set-up times and a more stable cutting process on various machines. Versatility, maintenance and material guidance As a universal tool, the cutter is particularly suited to sheet metal work but also performs well on many plastics, giving workshops flexibility when dealing with mixed-material assemblies. Two cutting edges balance cutting speed and surface quality, and the uncomplicated geometry makes regrinding straightforward if required. For best results, use appropriate cutting speeds and lubrication consistent with the base material and the HSS specification to extend tool life. Benefit from TECWERK’s HSS performance and secure supply from Metav Werkzeuge — contact Metav Werkzeuge for specific application advice and reliable delivery from Emmerich. Technical Data Article number: 2000862033NW Product name: Sheet-metal countersink drill Brand: TECWERK Packaging unit: 1 Facts Drilling range: 16–30.5 mm Overall length: 76 mm Shaft diameter: 9 mm Countersink angle: 20° Cutting edges: 2 Special features Cutting material: HSS Shaft with 3 clamping flats Radially relieved, conically increasing cutters for a peeling cut Suitable for sheet metal and plastics Usable on any drill FAQ What materials can this countersink drill process? The TECWERK sheet-metal countersink drill is suitable for sheet metal and many plastics; the HSS cutting material provides the hardness and toughness required for these applications. What diameter range does the cutter cover? The tool covers a drilling range of 16–30.5 mm, enabling one cutter to serve multiple hole sizes without tool changes. How is the tool secured in the machine? The cutter features a Ø 9 mm shaft with three clamping flats, ensuring stable clamping and reduced runout in standard chucks and holders. Is the countersink angle suitable for flush fasteners? Yes, the 20° countersink angle creates precise chamfers ideal for flush screws and rivets, improving assembly quality. Can the cutter be used on handheld drills? The design allows use on any standard drill; the three clamping flats and shaft diameter support secure mounting in handheld and bench units. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of precise HSS cutting performance, a secure 10 mm shank with three flats and a 20° countersink for clean chamfers — ideal for efficient sheet-metal and plastic processing. Order the TECWERK tool directly through Metav Werkzeuge or consult our specialists for application advice. TECWERK sheet-metal peel drill — HSS, 24–40 mm range, 10 mm shank The TECWERK sheet-metal peel drill is a universal HSS tool designed to produce clean peeled holes and integrated countersinks in thin metals and plastics, suitable for use on standard drilling machines. HSS material for long tool life 20° countersink angle for precise chamfers 10 mm shank with three flats for firm clamping Universal tool for sheet metal and plastics Faster, more consistent holes through peeling action Built for efficiency, the HSS construction and the tool’s two cutting edges deliver sustained cutting performance while maintaining edge stability. The radially back-ground, tapering cutting edges produce a peeling cut rather than a blunt shearing action; this reduces burr formation and heat build-up, so holes remain dimensionally consistent. For production environments, the result is fewer reworks and a measurable time saving per workpiece. Clean countersinks and reliable chamfer geometry The integrated 20° countersink angle ensures a neat chamfer directly during drilling, eliminating the need for a separate countersinking pass. The controlled geometry allows for predictable fastener seating and reduces assembly time. This design detail translates into a practical benefit: a single tool achieves both holemaking and chamfering with consistent outcomes, improving process flow on the shop floor. Secure gripping and universal machine compatibility A 10 mm shank with three flats provides positive clamping in chucks and reduces slippage during interrupted cuts. The shaft profile suits standard drill chucks, so the tool is compatible with any drilling machine commonly found in workshops. This universality simplifies tooling logistics while ensuring stable, concentric rotation and repeatable hole quality. Versatile use across thin metals and plastics The geometry and material choice make the tool particularly effective for sheet metal processing, while also being suitable for various plastics, widening its application range in repair shops and production lines. The moderate cutting geometry helps avoid melting or deformation when working with softer polymers, and the HSS composition preserves edge integrity when used on steel sheets. For procurement or specification advice on the TECWERK HSS sheet-metal peel drill (SKU 2000862034NW), contact Metav Werkzeuge — technical consultants available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific applications and order quantities. Technical Data Article number: 2000862034NW Name: Blechschälbohrer Bohrber.24-40mm HSS Gesamt-L.89mm Z.2 TECWERK Manufacturer: TECWERK Facts Shank diameter: 10 mm Cutting edges: 2 Overall length: 89 mm Packaging unit: 1 Special features Shank with 3 flats Countersink angle: 20° Tapered rising cutting edges, radially back-ground for peeling cut Universal tool for sheet metal and plastics Material: HSS FAQ What materials can be machined with this tool? The TECWERK sheet-metal peel drill is suitable for sheet metal and a range of plastics, its geometry minimising burrs and reducing thermal stress on polymer parts. What clamping system is recommended for best results? Use a standard chuck that accepts a 10 mm shank; the three flats on the shaft ensure secure clamping and reduced slippage under load. Does the tool create a countersink at the same time as the hole? Yes, the integrated 20° countersink angle produces a clean chamfer during drilling, removing the need for a separate countersinking operation. Is this tool suitable for all drilling machines? The universal shank design allows the tool to be used on most standard drilling machines; compatibility with specific equipment should be checked for special setups. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund