High-strength HSS‑Co construction combined with Form C geometry and a 40° helix ensures consistent thread formation and prolonged tool life; ideal for demanding production runs. Order the TECWERK machine tap directly via Metav Werkzeuge or ask our consultants if needed. TECWERK machine tap DIN 376C M14x2 HSS‑Co 6H — high-performance metric tap for blind holes A TECWERK machine tap DIN 376C M14x2 HSS‑Co 6H for reliable production threading, designed for blind-hole applications and steels up to approx. 900 N/mm². HSS‑Co construction for high wear resistance Form C geometry with 40° right‑hand helix Flank relief ground for improved chip control Metric ISO thread M14x2, tolerance 6H Optimised geometry for efficient, repeatable threading The combination of Form C profile and a 40° helix reduces cutting forces and promotes smoother chip evacuation, which translates into faster cycle times and fewer thread defects in series production. The HSS‑Co substrate increases red hardness and wear resistance compared with conventional high-speed steel, so tool life is extended under elevated temperatures and tough operating conditions. This means less frequent tool changeovers and improved uptime on machining centres, supporting consistent throughput and predictable productivity. Built for blind holes and demanding steels With flank relief ground behind the threads, the tool offers superior chip control in confined bores, minimising the risk of chip packing in blind holes. The tap is specified for use in steel up to 900 N/mm², making it suitable for many structural and engineering steels encountered in workshop and industrial settings. The metric ISO thread form and 6H tolerance provide standardised, high-precision fits for assemblies where repeatability and interchangeability matter. Practical workshop integration and machine compatibility Compliant with DIN 376C, the tool suits machine tapping operations where shank-mounted taps are required; the shank Ø 11 mm allows secure clamping in standard tool holders and reduces runout. The right‑hand helix and standard thread pitch of M14x2 ensure compatibility with common tapping cycles and thread-cutting parameters on machining centres and tapping heads. Supplied as a single tool item, the tap integrates easily into existing tooling inventories and supports consolidated procurement through Metav Werkzeuge for reliable restocking. For precision threading with proven HSS‑Co performance, contact Metav Werkzeuge to discuss the TECWERK machine tap (SKU 2000867384NW) and secure consistent supply from Emmerich — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 2000867384NW Designation: Machine tap DIN 376C M14x2 HSS‑Co Manufacturer: TECWERK Facts Thread: M14x2 (metric) Tolerance field: ISO2 (6H) Shank diameter: 11 mm Helix angle: 40° right‑hand Material strength application: up to approx. 900 N/mm² Special features HSS‑Co material Form C geometry Flank relief ground Designed for blind holes DIN 376C compliant Metric ISO thread FAQ Which materials can this tap machine? The TECWERK machine tap is designed for machining steels up to approx. 900 N/mm² and performs reliably on typical workshop steels when used with appropriate tapping parameters. Is the tap suitable for blind-hole tapping? Yes — the design states suitability for blind holes and the flank relief grinding supports chip evacuation in confined bores. What standard and tolerance does the tap follow? The tool complies with DIN 376C and produces a metric ISO thread with tolerance field ISO2 (6H). What is the shank size and how is it clamped? Shank Ø is 11 mm, allowing secure clamping in standard holders used for machine tapping operations. Is the thread right‑hand or left‑hand? The tool is manufactured with a right‑hand helix and right‑hand thread. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction, nitrided and vapour‑coated surface, and precision geometry for consistently accurate threads; order the Machine tap DIN 376C VA M14×2 mm directly via Metav Werkzeuge or ask our consultants if needed. Machine tap DIN 376C VA M14×2 mm by TECWERK — HSS‑Co, nitrided and vapour‑coated Machine tap DIN 376C VA M14×2 mm is designed for producing ISO metric threads in demanding materials where strength and corrosion resistance are required HSS‑Co high‑speed steel body Nitride and vapour coating for wear resistance For stainless/acid/heat‑resistant steels >850 N/mm² ISO2 (6H) tolerance for accurate threads Precise threads for high‑stress assemblies The combination of HSS‑Co substrate and geometric design ensures stable cutting performance when forming metric threads in tough materials. The tool’s DIN 376C specification and ISO2 (6H) tolerance field deliver reproducible thread quality, permitting confident assembly in components subject to high loads. This reduces rework and inspection cycles while improving joint reliability. Coating and surface treatment that extend tool life A nitrided and vapour‑deposited surface treatment provides enhanced hardness and resistance to adhesive wear. The layered finish supports consistent chip evacuation and lowers friction at the cutting edge, which in turn reduces torque peaks and heat build‑up. As a result, tool life is extended and process stability is increased on long production runs. Geometry engineered for blind‑hole performance With a right‑hand 40° spiral and flank relief, the tool is optimised for blind‑hole tapping, promoting controlled chip formation and evacuation away from the thread flanks. The spiral direction and flank modification help prevent chip packing in short axial depths, making the tap suited to blind holes in corrosion‑resistant and heat‑resistant alloys. Material suitability and handling benefits Specified for use in stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm², the tap combines a Form C, Type VA designation with a practical shaft Ø 11 mm for secure clamping. The blue ring marking supports rapid identification at the machine, and the solid construction ensures repeatable performance across batches. For precision tapping of high‑strength and corrosion‑resistant steels, contact Metav Werkzeuge to request a specification sheet or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867414NW Product name: Maschinengewindebohrer DIN 376C VA M14x2mm HSS‑Co nitr.u.vapor.6H TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867414NW Facts Thread: M14 × 2 mm Shaft diameter: 11 mm Spiral angle: 40° right‑hand Tolerance: ISO2 (6H) Application: blind holes Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: nitrided and vapour‑deposited surface Form: C, Type VA Flank relief (flank grinding) Blue ring for marking Complies with DIN 13 sheet 1 Suitable for stainless, acid‑ and heat‑resistant steels > 850 N/mm² FAQ What materials is this tap suitable for? The Machine tap DIN 376C VA M14×2 mm is specified for stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm², offering reliable thread formation in these alloys. Can this tap be used for blind holes and through holes? Yes. The tool geometry, including the 40° right‑hand spiral and flank relief, is optimised for blind‑hole tapping while remaining capable for many through‑hole applications when appropriate chip control measures are in place. What does ISO2 (6H) tolerance mean for thread quality? The ISO2 (6H) tolerance field indicates a standard internal thread tolerance that provides close fit and consistent engagement for metric fasteners, reducing play and ensuring repeatable assembly performance. How does the nitrided and vapour‑coated surface benefit performance? The combined surface treatments increase surface hardness and wear resistance, lower friction at the cutting edge, and contribute to longer tool life and improved process stability during high‑strength material tapping. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS‑Co construction combined with a nitrided and vapour‑coated surface for extended tool life and consistent DIN 376B thread quality; order the tool directly via Metav Werkzeuge or request technical advice from their consultants. Machine thread tap DIN 376B VA M16×2 HSS‑Co, nitrided and vapour‑coated — TECWERK Machine thread tap DIN 376B VA M16×2 HSS‑Co, nitrided and vapour‑coated — a high‑performance machine tap designed for producing ISO metric threads in stainless and heat‑resistant steels. Cobalt high‑speed steel HSS‑Co Nitrided and vapour‑coated surface Straight fluted for clean chip removal ISO metric M16×2, tolerance ISO2 (6H) Consistent thread quality for demanding materials The tool delivers precise ISO metric threads thanks to its DIN 376B specification and ISO2 (6H) tolerance class, reducing rework and ensuring interchangeability. Constructed from HSS‑Co, the tap maintains cutting edge integrity under the stresses of machining harder alloys. The combination of nitrided and vapour‑coated surfaces improves wear resistance and reduces friction, which contributes to stable thread form and repeatable results across production batches. Efficient chip control and longer service intervals A straight fluted geometry with relieved flanks provides reliable chip formation and evacuation during through threading, while the integrated cutting chamfer for through threads minimises build‑up at the tool entry. These features reduce cycle times and extend intervals between tool changes, supporting a more economical machining process. The robust shank Ø 12 mm ensures secure clamping in standard holders and steady torque transmission for machine operations. Application range and workshop integration Specifically engineered for stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm², the tool is suitable for demanding production and repair tasks in industrial workshops. Its Form B (Type VA) design caters to applications where straight flutes and a clean thread finish are required. The tap is compatible with common tapping units and standard thread‑driving equipment, enabling straightforward integration into an existing workflow while preserving thread integrity and surface quality. Secure a reliable TECWERK threading solution through Metav Werkzeuge; for supply and expert consultation contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical guidance. Technical data Article number: 2000867356NW Brand: TECWERK Packaging unit: 1 Dimensions & tolerances Thread size: M16×2 Tolerance: ISO2 (6H) Shank diameter: 12 mm Suitable for materials >850 N/mm² (tensile strength) Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: nitrided and vapour‑coated Standard: DIN 376B; reference DIN 13 sheet 1 Geometry: straight fluted, Form B (Type VA) Additional: relieved flanks, cutting chamfer for through threads, blue ring marking FAQ What materials is this tap designed for? The TECWERK machine thread tap DIN 376B VA M16×2 HSS‑Co, nitrided and vapour‑coated is designed for stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm². Which tolerance and thread standard does the tap meet? Threads are produced to ISO2 (6H) tolerance and comply with DIN 376B and DIN 13 sheet 1 specifications for metric ISO threads. What marking and shank size identify the tool? The tap is marked with a blue ring and has a shank Ø 12 mm, suitable for standard machine clamping systems. Is the tool suitable for through threading applications? Yes, the tap includes a cutting chamfer specifically for through threads, and the straight‑flute design supports reliable chip evacuation. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co construction, nitrided and vapourised surface treatment and the ISO2 (6H) tolerance class for reliable, repeatable blind‑hole threading. Order the TECWERK tap directly via Metav Werkzeuge or consult our specialists for technical matching. TECWERK machine thread tap M16×2 mm (DIN 376C) — HSS‑Co, nitrided and vapourised with 40° right‑hand spiral TECWERK machine thread tap M16×2 mm (DIN 376C) is a spiral‑fluted, cobalt high‑speed steel tap designed to produce metric ISO threads in blind holes, optimised for stainless, acid‑ and heat‑resistant steels with elevated tensile strength. HSS‑Co construction for high wear resistance Nitrided and vapourised surface treatment Right‑hand 40° spiral for blind holes ISO2 (6H) tolerance for precise metric threads Reliable performance for blind‑hole threading The HSS‑Co composition combines hardness and toughness to withstand the demands of machining high‑strength stainless and heat‑resistant alloys. The right‑hand 40° spiral actively directs chips back into the flutes, reducing the risk of chip packing in blind holes and lowering the chance of tap breakage. The combination of a ground flank relief and the vapourised layer improves edge stability and extends component life, resulting in fewer tool changes and less unplanned downtime. Threads that fit first time Designed to the DIN 13 Part 1 metric standard and manufactured to ISO2 (6H) tolerance, this tap produces threads with consistent pitch and flank geometry suitable for assembly without rework. ISO2 (6H) indicates a standard internal tolerance for general industrial use, meaning mating bolts and nuts will achieve reliable engagement and predictable preload. This level of precision supports efficient throughput and reduces scrap from mismatched fittings. Suited to demanding materials and applications Specified for machining stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm², this tool is tailored to applications where corrosion resistance and elevated strength are required. The designation type VA signals suitability for stainless materials, while Form C indicates the tap geometry optimised for such alloys. Where conventional taps struggle with long, stringy chips or rapid edge wear, this design maintains thread quality and dimensional control. Workshop integration and handling benefits A shank 12 mm diameter provides secure clamping in standard toolholders and machines, while the visible blue ring serves quick identification on the bench. The vapourised surface and nitriding process reduce friction and improve release from sticky materials, supporting faster cycle times and improved tool life. For procurement and stock management, the robust specification and clear identification simplify selection and reduce the risk of ordering incorrect thread forms. Choose the TECWERK M16×2 mm machine thread tap for durable blind‑hole threading and contact Metav Werkzeuge for expert procurement advice and reliable supply from Emmerich. Technical data Article number: 2000867416NW Label: Maschinengewindebohrer DIN 376C VA M16x2mm HSS‑Co nitr.u.vapor.6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: M16 × 2 mm Shank diameter: 12 mm Spiral angle: 40° Tolerance class: ISO2 (6H) Tensile strength suitability: > 850 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Coating / treatment: nitrided and vapourised Standard: DIN 376C; DIN 13 Part 1 Geometry: Form C; type VA Application: for blind‑hole threads Identification: blue ring Flank relief: flanks relieved for improved cutting action FAQ What materials is this tap designed for? The TECWERK M16×2 mm machine thread tap is specified for stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm² and is manufactured to perform reliably in such alloys. Is this tap suitable for through‑holes as well as blind holes? While optimised for blind holes thanks to the right‑hand 40° spiral, the tool can also be used in through‑hole applications where the thread form and material compatibility are appropriate. What does ISO2 (6H) mean for thread fit? ISO2 (6H) denotes a standard internal tolerance providing a general‑purpose fit; the tap produces metric threads conforming to DIN 13 Part 1, ensuring consistent engagement with standard external threads. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co material, straight‑fluted geometry and precision 6H tolerance for dependable, repeatable threading in production. Order this machine thread tap directly from Metav Werkzeuge or consult our technical advisors for application-specific guidance. Machine thread tap DIN 376B AL M16×2 HSS‑Co 6H – TECWERK A Machine thread tap DIN 376B AL M16×2 for high‑quality through threads in long‑chipping, soft materials, designed for machine tapping with straight flutes and a cutting chamfer for reliable chip evacuation HSS‑Co for increased wear resistance Straight‑fluted DIN 376B geometry ISO metric thread M16×2, tolerance 6H Shank Ø 12 mm for secure clamping Accurate threads for demanding production runs The machine tap is manufactured from HSS‑Co, a cobalt‑alloyed high‑speed steel that enhances hot‑hardness and wear resistance, ensuring consistent cutting performance under repeated use. The tap conforms to DIN 376B and the metric ISO thread specification, with a tolerance class 6H for the internal thread; this combination guarantees a precise fit with standard bolts and nuts, reducing rework and assembly time. Specifying a tap with ISO2 tolerance provides predictable clearance and interchangeability across components, which supports uninterrupted production and quality control processes. Designed for long‑chipping, soft materials and through holes The straight‑fluted, Type AL (Form B) geometry is purpose‑built for materials that produce long chips, such as some aluminium alloys and softer steels. The straight flutes guide chips away from the cutting zone rather than breaking them, which lowers the risk of chip jamming when producing through threads. The integrated cutting chamfer for through threads promotes smooth entry and exit, improving surface finish and reducing torque spikes during the thread‑forming pass. Combined with a shank Ø 12 mm, the tool offers stable clamping and reduced run‑out when used in standard machine tool holders. Clean profile and controlled flank geometry for superior thread form Flanks are relief‑ground to improve thread profile accuracy and diminish chatter, which delivers consistent lead and flank contact across the full thread length. The tap’s geometry and finish reduce cutting forces and heat generation, which extends tool life and maintains thread quality over larger batches. For purchasers seeking predictable machining outcomes, these design choices translate into fewer rejects and a more economical operation. As an experienced precision partner, Metav supports traceable product selection and ensures the supplied tools meet industry expectations for robustness and repeatability. For dependable series production, choose the TECWERK machine thread tap via Metav Werkzeuge; contact our advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and compatibility checks. Technical data Article number: 2000867376NW Product name: Machine thread tap DIN 376B AL M16×2 HSS‑Co 6H Manufacturer: TECWERK Packaging unit: 1 Core technical data Thread: M16×2 mm Tolerance field: ISO2 (6H) Shank diameter: 12 mm Form: B / Type AL Standard: DIN 13 sheet 1 Special features Material: HSS‑Co Straight‑fluted (geradegenutet) Flank relief ground (Flanken hinterschliffen) Cutting chamfer for through threads (Schälanschnitt für Durchgangsgewinde) Suitable for long‑chipping, soft materials FAQ What materials is this tap suitable for? The TECWERK machine thread tap is designed primarily for long‑chipping, softer materials; its straight‑fluted geometry and cutting chamfer aid chip evacuation for through threads. Is the thread tolerance compatible with standard nuts and bolts? Yes, the tap produces an ISO metric thread M16×2 with tolerance 6H, which matches standard internal thread specifications for reliable assembly. How is chip control achieved with this tool? Chip control is managed through the straight‑fluted design and the cutting chamfer for through holes, allowing chips to be guided out of the hole and reducing the risk of jamming. What clamping interface is recommended for stable operation? A secure holder or collet that grips the shank Ø 12 mm is recommended to minimise run‑out and ensure repeatable thread quality during machine tapping. Does the tool comply with recognised standards? The tap follows DIN 376B geometry and the metric thread specification referenced in DIN 13 sheet 1, ensuring standardised thread form and interchangeability. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of high-temperature hardness, precise ISO thread conformity and robust mounting for uninterrupted production. Order or request specification support via Metav Werkzeuge for dependable supply and expert advice. Machine tap DIN 376B H M16×2 mm HSS‑Co 6H — TECWERK Machine tap DIN 376B H M16×2 mm HSS‑Co 6H is a heavy-duty machine tap engineered for producing metric ISO internal threads in high-strength steels on industrial tapping machines. Cobalt high-speed steel (HSS‑Co) for wear resistance Straight flute for controlled chip evacuation Metric ISO thread M16×2 mm, tolerance 6H Shank Ø 12 mm for stable clamping Built for high-strength materials and extended production runs The HSS‑Co composition provides elevated red hardness and abrasion resistance, making this machine tap suitable for machining steels with tensile strengths >1000 N/mm². The shear-cutting chamfer reduces axial cutting forces on entry for through threads, producing cleaner starts and lowering the risk of breakage. Reduced tool wear translates into fewer tool changes and longer uninterrupted cycles, improving throughput on high-volume tapping operations. Precise, standardised threads that simplify assembly The tool forms a M16×2 mm metric ISO thread in accordance with DIN 13 Blatt 1, delivering a consistent internal fit in tolerance 6H. The 6H tolerance class is a commonly specified internal thread clearance that balances manufacturability with reliable screw engagement, helping to minimise rework and ensuring interchangeability with standard fasteners. This predictability supports quality control and repeatable assembly results. Geometry and mounting tailored for machine use A straight flute geometry combined with flank relief ground cutting edges improves chip control and prevents clogging in continuous or automated tapping processes. The shank Ø 12 mm and Form B Type H designation comply with toolholder standards per DIN 376B, enabling secure clamping and accurate concentricity in machine spindles. Visual identification features aid quick tool selection at the machine station, contributing to efficient tool management. For specification assistance, availability checks or to order TECWERK HSS‑Co machine taps, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and reliable supply. Technical Data Article number: 2000867366NW Label: Maschinengewindebohrer DIN 376B H M16x2mm HSS-Co 6H TECWERK Manufacturer: TECWERK Facts Thread size: M16×2 mm Tolerance: ISO2 (6H) Shank diameter: 12 mm Material: HSS‑Co Standard: DIN 13 Blatt 1 Special features Form B, Type H Straight flute Flank relief ground Shear-cutting chamfer for through threads Suitable for steels with tensile strength >1000 N/mm² FAQ Which materials is this machine tap suitable for? The TECWERK machine tap (DIN 376B, M16×2 mm) is designed primarily for difficult-to-machine steels with tensile strength >1000 N/mm², offering the required hardness and edge stability for such applications. What thread accuracy and standard does the tap achieve? The tap produces a metric M16×2 mm thread to DIN 13 Blatt 1 and a tolerance of ISO2 (6H), providing a reliable internal fit for standardised assemblies. Is the tap intended for through threads or blind holes? This tool features a shear-cutting chamfer for through threads, optimised for clean entry and controlled chip formation when tapping all the way through a workpiece. What are the mounting requirements for machine use? The tap has a shank Ø 12 mm and conforms to Form B Type H dimensions under DIN 376B, ensuring compatible and secure clamping in standard machine tool holders. How does the HSS‑Co material improve tool life? The cobalt-alloyed high-speed steel maintains hardness at elevated temperatures and offers enhanced abrasion resistance, so the tap sustains cutting performance longer under heavy-duty or high-speed conditions. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable through HSS‑Co PM construction and a low‑friction HARDLUBE coating, this machine tap delivers consistent metric threads under continuous use. Matched to a 12 mm shank and standardised DIN 376 length, it is ready for common toolholders and automatic tapping cycles. Order the machine tap directly via Metav Werkzeuge or ask our consultants if needed. TECWERK machine tap DIN 376B — M16×2, HSS‑Co PM, HARDLUBE The machine tap DIN 376B M16×2 is a universal, straight‑flute cutting tool designed for efficient production of metric ISO threads in through‑hole applications. HSS‑Co PM for high wear resistance HARDLUBE coating reduces friction Straight flute, DIN 376 length Suitable for steel, stainless and aluminium Consistent thread quality and cycle reliability The combination of HSS‑Co PM (powder‑metallurgy high‑speed steel with cobalt) and a HARDLUBE surface finish ensures stable cutting performance and extended tool life under repeat cycles. The tool is produced to DIN 376 dimensions and forms metric threads to DIN 13 Part 1, delivering predictable pitch and profile accuracy; the 6HX tolerance field provides the clearance typically required for general‑purpose fastenings. In practice, this means fewer rejects and more predictable set‑ups when integrating the tap into production workflows. Versatile material compatibility for workshop and production use Designed as a universal tap (Form B / Type UNIVERSAL) with a straight flute, the tool is suitable for machining steel, stainless steel, aluminium, copper alloys and cast iron. The specified geometry — an optimised edge rounding and cutting geometry — gives reliable chip formation across these materials, while the included chamfer for through threads simplifies start‑up and reduces thread‑bottom burrs. This versatility reduces the need for multiple specialised taps and supports leaner tooling inventories in mixed‑material environments. Coating, geometry and shank design explained The HARDLUBE coating lowers friction and improves evacuation of chips from the cutting zone, which helps maintain surface finish and extends tool life under higher speeds. The 12 mm shank diameter suits common collets and holders, enabling secure clamping and concentricity in automatic machines. The straight‑fluted design is particularly effective for through‑hole tapping because it promotes longitudinal chip flow; the built‑in chamfer and cutting geometry reduce thread‑starting forces, improving hole alignment and reducing torque peaks during tapping. For reliable production choose the TECWERK machine tap with HARDLUBE — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867984NW SKU: 2000867984NW Manufacturer: TECWERK Facts Thread: M16 × 2 mm Shank diameter: 12 mm Tolerance field: 6HX Length: DIN 376 Cutting direction: right‑hand Special features Material: HSS‑Co PM Coating: HARDLUBE Flute: straight flute Type: Form B / Universal Standard: DIN 376 Thread standard: DIN 13 Part 1 Chamfer for through threads Optimised edge rounding and cutting geometry Suitable for steel, stainless steel, aluminium, copper alloys, cast iron FAQ What materials can be machined with this tap? The TECWERK machine tap DIN 376B M16×2 is specified for steel, stainless steel, aluminium, copper alloys and cast iron, making it suitable for mixed‑material production runs. What does the 6HX tolerance mean for threading? A 6HX tolerance on a metric ISO thread, as provided by this tap, offers a standard clearance for general assembly; the designation ensures compatibility with common mating fasteners when produced to DIN 13 Part 1. Is the shank compatible with standard toolholders? Yes, the 12 mm shank is compatible with typical collets and holders used in automatic tapping machines and manual spindles, ensuring secure clamping and concentricity. Which standard and form does the tap comply with? The tool conforms to DIN 376 length and Form B universal design and produces threads to DIN 13 Part 1; it is intended for through‑hole applications with the included chamfer. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co construction, TiN coating and ISO2 tolerance for reliable, repeatable M16 × 2 threads; order genuine TECWERK machine taps directly via Metav Werkzeuge or consult our specialists for application guidance. Machine tap DIN 376B M16 x 2 mm HSS‑Co TiN 6H TECWERK — precision machine tap for metric through threads A Machine tap DIN 376B M16 x 2 mm HSS‑Co TiN 6H TECWERK is engineered for high‑duty production use, delivering accurate metric threads on steels up to 1000 N/mm² with industrial interchangeability and long tool life. HSS‑Co for improved heat resistance TiN coating extends tool life Form B straight flute for stable chip control ISO2 (6H) tolerance for precise metric threads Dependable thread accuracy for production environments The M16 x 2 mm machine tap meets DIN 13 sheet 1 standards and is manufactured to ISO2 (6H) tolerance, ensuring threads are within industrial interchangeability limits. This precision reduces rework and assembly issues on mass production runs, where consistency is critical. The specification for ISO2 provides a tight tolerance class commonly used in mechanical engineering and serial production, making the tool suitable for components that must mate precisely with standard nuts or threaded fittings. Using a tool designed to these standards simplifies quality control and fits seamlessly into existing inspection routines. Longer life and process stability through material and coating Constructed from HSS‑Co (cobalt high‑speed steel) and finished with a TiN coating, the tap offers improved hot hardness and wear resistance compared with conventional HSS. The combination increases resistance to heat and abrasion during high‑speed tapping cycles, which translates into fewer tool changes and lower per‑part tooling costs. For operations that prioritise throughput, this means more uninterrupted production time and predictable tool change intervals. The material and coating selection is particularly effective when machining medium‑strength steels up to 1000 N/mm², where elevated temperatures can shorten the life of untreated tools. Controlled chip formation and reliable through‑thread performance The tool’s Form B design with a straight flute promotes consistent chip evacuation in through threading operations, while the flanks are relief ground to reduce friction and minimise thread distortion. A specifically designed chamfer for through threads (Schälanschnitt) provides a progressive cutting action that eases engagement and lowers the risk of chip packing at the start of the thread. These characteristics enhance process reliability on automated tapping units and machining centres, helping to avoid breakages and minimise scrap—key benefits for production and toolroom environments. Practical integration for workshops and production lines With a 12 mm shank the tap fits standard toolholders and collets, allowing quick installation on tapping heads and CNC machines. The tool’s suitability for a range of steels and its industrial tolerance class make it a versatile choice for maintenance, fabrication and serial production. Buyers focused on predictable output will value the tool’s combination of durability and precision, which helps to keep fixtures, gauges and mating components within specification without constant adjustments. For specialist applications or uncertain material grades, Metav’s consultants are available to advise on selection and machine parameters. Order genuine TECWERK machine taps through Metav Werkzeuge for assured quality and consistent production results — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery. Technical Data Article number: 2000867308NW Label: Maschinengewindebohrer DIN 376B M16x2mm HSS‑Co TiN 6H TECWERK Manufacturer: TECWERK Pack unit: 1 Data Thread: M16 x 2 mm Shank diameter: 12 mm Tensile strength capacity: up to 1000 N/mm² Tolerance: ISO2 (6H) Standard: DIN 13 sheet 1 Special features Material: HSS‑Co Coating: TiN Form: B, straight flute Flanks relief ground Chamfer for through threads FAQ What materials is this tap suitable for? The tap is suitable for machining steels up to 1000 N/mm²; the TECWERK M16 x 2 mm tool combines HSS‑Co and TiN for enhanced performance on medium‑strength alloys. What does ISO2 (6H) tolerance mean for the finished thread? ISO2 (6H) indicates a tight tolerance class for metric internal threads, ensuring the threads produced by this TECWERK machine tap meet industrial interchangeability standards. Is this tap intended for through threads or blind holes? The tap features a chamfer for through threads, optimised for cutting full‑depth through threads; it is primarily designed for through‑hole applications. How does the TiN coating affect tool life? The TiN coating reduces abrasion and surface wear, increasing the number of holes that can be tapped before tool change is required with the TECWERK tap. What is the shank size and how does it integrate with tooling? The tool has a 12 mm shank, compatible with standard collets and tapping heads used in production and workshop environments. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high-temperature-resistant cutting material, precise ISO tolerance and a form-designed flute for reliable through threads; this ensures consistent results in serial production and minimal rework. Order the tap directly via Metav Werkzeuge or consult the technical team if further specification advice is required. RUKO Machine tap DIN 376B M16 x 2 mm, HSS-Co5, 6H The RUKO Machine tap DIN 376B M16 x 2 mm is a straight-fluted, Form B machine tap designed for efficient creation of metric ISO threads in through-hole applications across a range of ferrous and non-ferrous materials HSS-Co5 for enhanced heat resistance Straight flutes, Form B geometry ISO2 (6H) tolerance for precision Shaft Ø 12 mm for secure holding Consistent threads and material suitability for demanding parts The combination of HSS-Co5 cutting material and the specified M16 x 2 mm geometry provides a reliable baseline for machining medium-strength components. The tool is suitable for machining unalloyed steels, alloyed steels up to 1000 N/mm², malleable iron and non-ferrous metals, which reduces the need for multiple specialised taps on the shop floor. The 6H tolerance (ISO2) ensures that threads meet common assembly specifications, supporting interchangeability and reducing inspection overhead. Geometry and chip evacuation tailored for through threading The Form B design with straight flutes and a dedicated shaving/chamfer relief for through threads gives controlled engagement when cutting full-length holes. Flank relief and a right-hand cutting orientation optimise load distribution along the flutes, improving stability during feeding and lowering the risk of thread distortion. These design choices translate into fewer reworks and steadier cycle times for repetitive production tasks. Machine compatibility and process reliability A shaft Ø 12 mm and the DIN 376B shank form provide robust clamping in standard collets and tool holders, supporting secure torque transfer and repeatable concentricity in automated machining centres. The nominal cutting direction (right-hand cutting) aligns with conventional spindle rotation, simplifying process setup. Using a tool with a harmonised material and tolerance specification reduces variation between batches, aiding quality control processes and operational predictability. Practical application and upkeep in the workshop This tap is manufactured for serial use in production and benefits from correct support: appropriate feed rates, sufficient coolant or lubricant and steady clamping are decisive for tool life. The shaved flanks assist in reducing friction and maintaining thread quality over longer runs; regular inspection of thread form and prompt replacement when wear appears preserves component tolerances. If clarification on machine parameters or material combinations is required, Metav’s advisors can provide guidance tailored to the production environment. Contact Metav Werkzeuge to discuss suitability for specific materials or to place an order for the RUKO machine tap; technical advice is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000601935NW Manufacturer: Ruko GmbH Facts Thread: M16 x 2 mm Shaft diameter: 12 mm Tolerance: ISO2 (6H) Material suitability: steels up to 1000 N/mm² Packing unit: 1 Special features HSS-Co5 Form B Straight-fluted Flank relief (flank honed) DIN 13 Blatt 1 Right-hand cutting Shaving/chamfer for through threads Metric ISO thread FAQ What materials can this tap machine threads in? The RUKO machine tap is suitable for unalloyed and alloyed steels up to 1000 N/mm², malleable iron and non-ferrous metals as stated in the technical description. Is the thread accuracy suitable for assembly with ISO nuts? Yes, the tap produces threads to ISO2 (6H) tolerance, which aligns with standard metric fitting requirements for reliable assembly. What shank diameter is required for secure clamping? The tool has a shaft Ø 12 mm, designed for secure clamping in compatible collets and holders commonly used in production tooling. Does the tap support through-hole threading operations? The tap features a dedicated shaving/chamfer relief for through threads, making it appropriate for through-hole metric threading tasks. Which specification or standard does this tap conform to? The tap is manufactured to DIN 376B requirements and references DIN 13 Blatt 1 for metric thread form and tolerances. Manufacturer: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen

Take advantage of robust HSS‑Co construction, a TiCN coating and DIN‑specified tolerance to deliver consistent, high‑quality M16 threads in cast‑iron components; order the tap via Metav Werkzeuge or contact their advisers for application guidance. TECWERK machine tap M16×2 mm — HSS‑Co, TiCN, DIN 376C The TECWERK M16×2 machine tap for metric ISO threads, designed for cast‑iron work and both through and blind holes Cobalt HSS for improved wear resistance TiCN coating for extended tool life Straight flutes with relieved flanks Tolerance class 6HX for precise threads Reliable thread quality for cast‑iron parts The HSS‑Co base material combines toughness with heat resistance, making this tap well suited to repeated threading operations in cast materials. The TiCN coating reduces friction and increases tool life, which in turn lowers downtime for tool changes; together these characteristics ensure steady production output and fewer rejects. For engineers specifying threads, the 6HX tolerance and compliance with DIN 13 (sheet 1) provide a clear, measurable quality level for mating parts. Optimised geometry for clean chips and reduced breakage With straight flutes and relieved flanks, the tool promotes reliable chip formation when working cast iron grades such as grey cast iron and graphite cast iron. This geometry helps prevent blockage in blind holes and improves surface finish on the thread flanks, which is particularly important when subsequent assembly requires smooth engagement. The design reduces the risk of tap breakage, translating into safer machining cycles and lower rework rates. Application versatility and simple integration Rated as a Form C / Type GG machine tap to DIN 376C, the tool is suitable for both through and blind hole threading in temper‑hardened cast irons. The standardised M16×2 mm metric thread form simplifies part lists and tooling set‑ups across production lines. With a shank Ø 12 mm, the tap fits common collet and chuck systems, allowing straightforward integration into existing machines without additional adaptors. Clear technical assurance and easy specification Standards‑based specifications such as DIN 376C, metric ISO thread, and tolerance 6HX provide objective criteria for procurement and quality control. The white identification ring and the TiCN surface treatment make tool handling and inventory identification faster on the shop floor. For purchasers and process planners, these measurable properties support predictable production planning and traceable part quality. Choose the TECWERK M16×2 machine tap for dependable threading in cast‑iron components and contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical Data Article number: 2000867542NW SKU: 2000867542NW Label: Maschinengewindebohrer DIN 376C GG M16×2 mm HSS‑Co TiCN 6HX TECWERK Facts Thread: M16×2 mm Tolerance: 6HX Standard: DIN 376C; DIN 13 Blatt 1 Shank Ø: 12 mm Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: TiCN‑coated Form/type: Form C · Type GG Flute design: straight fluted Flank treatment: relieved flanks Identification: white ring Hole types: for through holes and blind holes Suitable for: grey cast iron, graphite cast iron, malleable/temper cast iron FAQ What materials is this tap suitable for? The TECWERK M16×2 machine tap is designed for grey cast iron, graphite cast iron and temper/malleable cast iron, as stated in the product specification. Is the tap coated and why does that matter? Yes, the tool is TiCN‑coated; the coating reduces friction and wear, which extends tool life and improves thread quality under production conditions. Which tolerance and standards does this tap meet? The tap conforms to DIN 376C and DIN 13 sheet 1, with a 6HX tolerance, ensuring standardised thread dimensions and interchangeability. Will the shank fit standard holders? The 12 mm shank diameter is compatible with common collet and chuck systems used for machine tapping operations. Can this tap be used in blind holes? Yes, the geometry is suitable for both through and blind hole threading, with straight flutes and relieved flanks that aid chip evacuation. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS construction, DIN 376C thread form and an ISO2 (6H) tolerance, this machine thread tap delivers consistent, production-grade M16×2 blind threads in unalloyed and low-alloy steels up to 800 N/mm² as well as in malleable cast iron and non‑ferrous metals; order directly via Metav Werkzeuge or consult the specialists for application advice. Machine thread tap DIN 376C M16×2 HSS 6H – RUKO A Machine thread tap DIN 376C M16×2 HSS 6H – RUKO for producing accurate blind ISO metric threads in unalloyed and low-alloy steels, malleable cast iron and non‑ferrous metals in industrial tapping operations HSS construction for robust wear resistance DIN 376C profile for consistent thread geometry ISO2 (6H) tolerance for reliable internal fit Consistent, production-grade M16×2 threads for industrial use The M16×2 machine tap is built in HSS, providing a durable cutting edge for repetitive production work. The DIN 376C thread form ensures compliant metric thread geometry according to DIN standards, while the ISO2 (6H) tolerance offers a medium internal fit that reduces rework and scrap. Designed for machine tapping into blind holes, the tool supports repeatable results on assembly components where thread quality directly affects product function. The clear specification and standard conformity make it suitable for series production and maintenance environments. Geometry and chip control optimised for blind-hole tapping A 35° right-hand helix and flank honing (flank honing) improve chip formation and evacuation in blind holes, reducing the risk of chip jamming and surface damage. The Form C cut, combined with honed flanks, produces cleaner thread flanks and fewer burrs, which simplifies subsequent assembly and inspection. This optimised geometry translates into fewer rejects and less secondary finishing, enhancing throughput in shops where downtime and part rejection are costly. Material compatibility and application scope The tool is specified for use in unalloyed and low-alloy steels up to 800 N/mm² tensile strength, in malleable cast iron and in non‑ferrous metals, enabling versatility across a wide range of workshop tasks. The HSS substrate balances toughness and wear resistance, suitable for conventional machine tapping operations where heat and varying material properties are present. As a result, the tap is appropriate for production runs, repair jobs and toolrooms that require a reliable, general‑purpose machine tap for medium‑strength materials. Practical features for reliable machine setup and handling A 12 mm shank diameter accommodates standard collets and holders for secure mounting in tapping heads and CNC spindles. The right‑hand cutting direction matches typical spindle rotation, simplifying integration into existing processes. Compliance with DIN 13 Blatt 1 metric thread standards provides clarity for quality control and inspection routines. Together, these practical details support consistent set‑up times and predictable machining behaviour, which contributes to smoother production planning and fewer interruptions. For precision M16×2 machine threading from RUKO and professional advice on selecting the correct tap for specific materials, contact Metav Werkzeuge – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for ordering and technical consultation Technical data Article number: 4000601968NW Packaging unit: 1 Manufacturer: Ruko GmbH Facts Thread size: M16×2 mm Shank diameter: 12 mm Helix angle: 35° (right-hand) Tolerance: ISO2 (6H) Suitable tensile strength: up to 800 N/mm² Special features Material: High-speed steel (HSS) Form C cutting geometry Flank honing for improved surface finish Metric ISO thread per DIN 13 Blatt 1 Designed for blind-hole threading Suitable for unalloyed and low-alloy steels, malleable cast iron and non‑ferrous metals Right-hand cutting direction FAQ What thread size does this tap produce? The machine thread tap produces an M16×2 metric thread; the tool conforms to DIN 13 Blatt 1 for metric threads. Which materials can be machined with this tap? This RUKO tap is suitable for unalloyed and low-alloy steels up to 800 N/mm², malleable cast iron and a range of non‑ferrous metals. Is the tap suitable for blind-hole applications? Yes, the geometry and 35° helix are optimised for blind-hole tapping, improving chip evacuation and reducing the risk of jamming. What tolerance and fit can be expected from the thread? Threads produced meet ISO2 (6H) tolerance, offering a reliable medium internal fit for consistent assembly performance. What shank size is required for holding the tap? The tool has a 12 mm shank diameter and fits common collets and tapping holders used in machine tapping applications. Ruko GmbH: Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen

Take advantage of a robust combination of HSS‑Co cutting material for high‑strength steels, an aggressive 40° right‑hand spiral for reliable chip evacuation in blind holes, and ISO2 (6H) tolerance for precise M16 × 2 metric threads. Order the component directly via Metav Werkzeuge or consult our specialists for material and application advice. TECWERK machine tap DIN 376C H M16 x 2 mm — HSS‑Co, ISO2 (6H) The TECWERK machine tap DIN 376C H M16 x 2 mm is a spiral‑flute machine tap designed for producing precise metric internal threads in blind holes, optimised for demanding steels and industrial workshop use. HSS‑Co for machining high‑strength steels Right‑hand spiral 40° for secure chip evacuation For blind holes; Form C, Type H geometry ISO2 tolerance (6H) for accurate M16 × 2 threads Higher productivity in demanding materials Manufactured from HSS‑Co, this machine tap is intended for work in tough, high‑strength steels (>1000 N/mm²) where wear resistance and edge stability matter. Cobalt‑enhanced high‑speed steel increases hot hardness and extends tool life compared with standard HSS, which translates into fewer tool changes and more continuous production cycles. The Form C / Type H geometry provides a robust cutting edge for interrupted cuts and difficult materials, delivering consistent thread form and repeatable results on production runs. Reliable chip control for blind‑hole tapping Chip evacuation is critical when threading blind holes. The 40° right‑hand spiral directs chips back out of the bore quickly, reducing risk of jamming and thread damage. Combined with relieved flanks, the design minimises torque peaks and the likelihood of tap fracture, which supports safer operation and higher first‑pass yields. For non‑specialist workshops, this means fewer scrapped parts and less downtime due to reclaiming or rework, while preserving thread quality in confined bores. Precision conformity and seamless workshop integration Compliance with DIN 376C and reference to DIN 13 sheet 1 ensures the thread form and lead are compatible with standard metric fasteners. The tolerance class ISO2 (6H) provides a reliable fit for general engineering assemblies where controlled clearance and load distribution are required. A shaft Ø 12 mm facilitates mounting in common tap holders or collets, easing integration into existing tool setups. Supplied as a single unit, the tool suits both prototype work and serial production where traceable, standardised quality is essential. Discuss specific applications and delivery options with Metav Werkzeuge — our advisors can confirm material suitability and recommend drilling and machine parameters; call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a tailored supply. Technical Data Article number: 2000867436NW Label: Maschinengewindebohrer DIN 376C H M16x2mm HSS-Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867436NW Facts Thread: M16 x 2 mm Spiral angle: 40° Shaft Ø: 12 mm Tolerance: ISO2 (6H) Suitable for steels >1000 N/mm² Special features HSS‑Co Form C; Type H; Rotring Right‑hand spiral; flanks relieved For blind holes; metric ISO thread; DIN 13 sheet 1; DIN 376C For difficult‑to‑cut steels (>1000 N/mm²) FAQ Which materials is this tap suitable for? The TECWERK machine tap (SKU 2000867436NW) is designed for tough, high‑strength steels and performs reliably with materials above 1000 N/mm² due to its HSS‑Co composition. Can this tap be used for blind‑hole threading? Yes. The spiral geometry and relieved flanks make the tool specifically suited to blind‑hole threads, ensuring controlled chip evacuation and reduced risk of jamming. What level of fit is produced by this tool? Threads follow the ISO2 (6H) tolerance band, providing a standardised, precision fit suitable for typical engineering assemblies and metric fasteners. Which standards and specifications does the tap comply with? The tool is manufactured to DIN 376C with reference to DIN 13 sheet 1, ensuring compatibility with standard metric thread dimensions and profiles. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high‑alloy cutting material, universal geometry and precise ISO tolerance for reliable production of blind threads; order the tap directly via Metav Werkzeuge or consult the specialists for application advice. TECWERK machine tap DIN 376C – M16x2 HSS‑Co, ISO2 (6H) The TECWERK M16x2 machine tap for metric ISO threads, designed for blind holes in steels and non‑ferrous materials HSS‑Co high‑alloy cutting material Universal Form C geometry, green ring Right‑hand spiral 40° for efficient chip evacuation Tolerance ISO2 (6H) for precision threads High precision and consistent thread quality The TECWERK machine tap is engineered for production environments where repeatability and conformity to standards matter. Its HSS‑Co composition offers higher red‑hardness than conventional high‑speed steel, which maintains cutting edge stability under elevated temperatures and prolonged use. The combination of Form C geometry and DIN 376C specification supports consistent thread profiles according to DIN 13, while the 6H tolerance field ensures compatibility with standard metric fasteners. This reduces rework and supports efficient process control. Efficient chip control for blind‑hole threading A right‑hand spiral 40° and flank relief geometry provide controlled chip flow away from the cutting zone, which is particularly valuable when producing blind hole threads. The spiral angle promotes upward chip removal into the flute instead of compacting at the base of the hole, lowering the risk of tap breakage and improving surface finish. The universal helix and ground flanks contribute to reliable chip segmentation, shortening cycle times and limiting tool change interventions in batch production. Versatile material application and workplace benefits Geometry and material selection make this threading tool suitable for a broad range of workpiece materials: steel, stainless steels, spheroidal graphite cast iron, and non‑ferrous metals are explicitly supported. For workshops consolidating suppliers, a single universal tap that handles diverse materials simplifies inventory and speeds up job changeovers. The vaporised coating enhances wear resistance and lubricity, helping to extend tool life under mixed‑material workloads and preserving thread quality across runs. Machine compatibility and mounting details The tool is manufactured to integrate with standard machine spindles and toolholding systems: the shank is specified as shank Ø12 mm, offering secure clamping and minimal run‑out when used with suitable holders. The metric ISO thread M16x2 format aligns with common mechanical engineering practice, enabling direct use in assemblies and fixtures that demand ISO‑compliant fastenings. The universal design reduces the need for multiple specialised taps, supporting smoother workflow planning and fewer tool changes. For purchase or technical consultation on the TECWERK M16x2 HSS‑Co tap, contact Metav Werkzeuge for rapid supply and application support Technical data Article number: 2000867694NW Label: Maschinengewindebohrer DIN 376C Univ.M16x2mm HSS‑Co vap.6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread size: M16x2 Tolerance: ISO2 (6H) Shank diameter: Ø12 mm Helix angle: 40° Standard: DIN 376C / DIN 13 Blatt 1 Special features HSS‑Co cutting material Form C, universal geometry Vapourised coating Green ring identification Right‑hand spiral 40° Flanks relieved / ground For blind holes Suitable for steel, stainless steels, spheroidal graphite cast iron, non‑ferrous metals FAQ What workpiece materials are suitable for this tap? The TECWERK machine tap is specified for steel, stainless steels, spheroidal graphite cast iron and non‑ferrous metals, as noted in the product data. Is the tap suited for blind‑hole threading? Yes, the tool is designed specifically for blind holes and features a right‑hand spiral and flank geometry that improve chip evacuation in such applications. Which tolerance and thread standard does the tap conform to? Thread manufacture follows DIN 13 with a tolerance field of ISO2 (6H) for metric threads M16x2, ensuring compatibility with standard fasteners. What is the shank size and how should it be clamped? The shank is Ø12 mm; secure clamping in an appropriate toolholder with minimal run‑out is recommended to maintain thread accuracy. Does the tool have a coating and what benefit does it provide? A vapourised coating is applied to enhance wear resistance and reduce friction, which helps to extend tool life and improve thread surface finish. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co wear resistance, a 45° right‑hand spiral for reliable chip evacuation and ISO2 (6H) thread accuracy. Order the (Machine tap DIN 376C AL M16×2 mm HSS‑Co 6H TECWERK) directly via (Metav Werkzeuge) or ask our consultants if needed. Machine tap DIN 376C AL M16×2 mm HSS‑Co 6H (TECWERK) A high‑performance machine tap designed for forming precise metric threads in blind holes and optimised for long‑chipping, soft workpiece materials. HSS‑Co for improved wear resistance 45° right‑hand spiral for reliable chip flow For blind‑hole threads with ISO2 (6H) tolerance Shank Ø 12 mm for secure machine mounting Precise material and tolerance performance for repeatable threads Manufactured from HSS‑Co, this machine tap delivers improved wear resistance and consistent cutting performance across production runs. The tool cuts a M16×2 mm metric thread in accordance with DIN 13 and the ISO2 (6H) tolerance field, which helps to ensure interchangeability of threaded parts and reduces the need for secondary inspection. By combining a hard cobalt alloy with exacting geometry, the tap supports reliable cycle times and predictable tool life, contributing to efficient throughput on production machines. Geometry engineered to evacuate chips in blind‑hole applications The 45° right‑hand spiral and flank‑ground edges are designed to guide chips away from the cutting zone, a key advantage when producing blind holes where chip congestion can cause breakage. The Form C, Type AL configuration optimises the helix and relief geometry for long‑chipping, soft workpiece materials, reducing the risk of thread damage and tool failure. This focused geometry leads to fewer interruptions and a lower scrap rate in batch and single‑piece production alike. Robust shank and compatibility for machine tapping Equipped with a 12 mm shank, the tap is prepared for secure clamping in standard tool holders and collets used in machining centres and tapping heads. The solid construction supports stable alignment during engagement, which improves thread form and reduces the likelihood of tap deflection. For workshops seeking reproducible tapping results, the combination of a robust shank and precision ground thread flanks offers a practical balance of rigidity and cutting performance. Application advantages and process reliability Intended specifically for blind‑hole metric threads, this machine tap reduces rework through consistent thread form and dependable chip control. Its specification—HSS‑Co, Form C, Type AL—makes it particularly suited to production environments where the workpiece material tends to form long, continuous chips. Where process stability and repeatable quality matter most, the tool supports a smoother workflow and fewer stoppages, safeguarding overall productivity. For detailed suitability checks and supply options for the TECWERK machine tap M16×2 mm, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and delivery. Technical data Article number: 2000867456NW Product name: Machine tap DIN 376C AL M16×2 mm HSS‑Co 6H TECWERK Brand: TECWERK Packaging unit: 1 Core data Thread: M16×2 mm Shank diameter: 12 mm Tolerance: ISO2 (6H) Spiral angle: 45° right‑hand Standard: DIN 13 sheet 1 Special features Material: HSS‑Co Form C, Type AL Flank‑ground cutting edges For blind‑hole threads Suited to long‑chipping, soft materials Right‑hand spiral 45° Shank Ø 12 mm FAQ Which materials is this machine tap intended for? The TECWERK machine tap DIN 376C AL M16×2 mm is specified for long‑chipping, soft workpiece materials, where its spiral geometry and cutting edge preparation promote continuous chip evacuation. Is the tap suitable for blind‑hole threading? Yes. The tool is designed for blind holes, with a 45° spiral that directs chips away from the thread root to reduce congestion and tap breakage. What thread accuracy can be expected? Threads produced meet the ISO2 (6H) tolerance according to DIN 13 sheet 1, providing consistent and standardised metric threads. What is the shank size and how is it mounted? The tap features a 12 mm shank diameter, intended for secure clamping in standard collets and tool holders used on tapping heads and machining centres. What is the article number or SKU for ordering? The article number is 2000867456NW for the Machine tap DIN 376C AL M16×2 mm HSS‑Co 6H TECWERK. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

The combination of HSS‑Co PM construction, HARDLUBE coating and a 40° spiral flute reliably extends tool life and improves chip control for blind-hole tapping. Order supply or request technical advice directly via Metav Werkzeuge for a dependable workshop solution. Machine tap DIN 376C Univ. M16×2 mm – HSS‑Co PM, HARDLUBE (TECWERK) The Machine tap DIN 376C Univ. M16×2 mm is a universal machine tap designed for blind-hole threading and high-performance production in a range of common metals HSS‑Co PM for enhanced wear resistance HARDLUBE coating for reduced adhesion Right‑hand 40° spiral for blind threads Shank Ø 12 mm, DIN 376 form C Consistent throughput through hardened wear resistance The HSS‑Co PM substrate offers a high degree of microstructure stability under load, while the HARDLUBE surface treatment reduces friction and chip adhesion. Together these features lower tool wear and help maintain dimensional accuracy over longer runs; the result is fewer tool changes and reduced machine downtime. The 40° spiral geometry improves chip evacuation in blind hole applications, turning a demanding operation into a reproducible production step with predictable cycle times. Reliable threads across common workshop materials Designed for the M16×2 ISO metric thread, manufactured to DIN 13 sheet 1 with tolerance class 6HX, the tap delivers standard-compliant thread quality for assembly-critical parts. Material compatibility spans steel, stainless steel, aluminium, copper alloys and cast iron, providing flexibility in mixed-production environments. The tolerance class ensures controlled internal diameters and a reliable fit for industry-standard fasteners, reducing scrap rates and inspection rework. Machine-ready design for secure process integration The tool follows DIN 376 dimensions with a nominal length of 2×D and a shank Ø 12 mm, facilitating secure clamping in standard machine holders and consistent alignment during automated cycles. Its Form C universal design and optimised cutting geometry support stable chip formation and smooth penetration in blind-hole tapping. Supplied as a single unit, the tap is intended for integration into organised tooling setups where predictable performance and repeatable quality are essential. Metav Werkzeuge’s position as a quality filter for the European market underpins reliable supply and documentation for production planning. For tailored advice on implementing this TECWERK machine tap in production or to arrange supply from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867998NW Designation: Machine tap DIN 376C Univ. M16×2 mm HSS‑Co PM HARDLUBE Brand: TECWERK Packaging unit: 1 Core technical data Thread: M16×2 mm Thread standard: ISO metric thread (DIN 13 sheet 1) Tolerance class: 6HX Spiral angle: 40° Length: DIN 376 (2×D) Shank diameter: 12 mm Cutting direction: Right Materials & features Material: HSS‑Co PM Coating: HARDLUBE Form: C, universal type Application: blind-hole threads Suitable for: steel, stainless steel, aluminium, copper alloys, cast iron Optimised edge rounding and cutting geometry FAQ Is this tap suitable for blind-hole threading? The Machine tap DIN 376C Univ. M16×2 mm (TECWERK, SKU 2000867998NW) is specified for blind-hole threads and features a 40° spiral to aid chip evacuation in such applications. Which materials can be machined with this tap? This TECWERK tap is designed for universal use and is suitable for steel, stainless steel, aluminium, copper alloys and cast iron as stated in the product data. What does the tolerance class 6HX mean for assembled parts? Tolerance class 6HX for the M16×2 thread indicates a standard internal thread fit with controlled minor diameter; it supports consistent assembly behaviour for fasteners manufactured to ISO metric standards. How does the HARDLUBE coating benefit production? The HARDLUBE coating reduces friction and chip adhesion, which helps to extend tool life and stabilise process windows, particularly in mixed-material production runs. What are the key dimensions to consider for machine setup? Relevant dimensions include the shank Ø 12 mm, the DIN 376 overall length (2×D) and the M16×2 thread form; these determine clamping and depth settings in machine tooling fixtures. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining HSS‑Co construction, TiN coating and ISO2 (6H) thread accuracy, this machine tap delivers durable, precise M16×2 metric threads and reliable throughput in serial production; order the tool directly via Metav Werkzeuge or consult the advisors for application-specific guidance. TECWERK machine tap DIN 376C, M16×2 mm — HSS‑Co, TiN‑coated, 6H The TECWERK machine tap DIN 376C M16×2 mm is a universal machine tap designed for producing accurate metric internal threads in steels, stainless steels, spheroidal cast iron and non‑ferrous metals, optimised for blind‑hole applications. Cobalt HSS base material for durability TiN coating extends tool life ISO2 tolerance (6H) for precise thread fit Right‑hand 40° spiral for blind holes High accuracy and predictable thread fit for serial production The universal threading tool is manufactured from HSS‑Co, combining toughness with thermal stability to maintain cutting geometry under load. The TiN coating reduces friction and resists wear, which translates into longer tool life and more consistent batch output. Conforming to DIN 13 (sheet 1) with ISO2 (6H) tolerance ensures the resulting internal threads meet established metric standards, so mating parts assemble with predictable clearance and minimal rework. This technical consistency supports efficient machining sequences and reduces inspection effort across repetitive production runs. Process stability and reduced cycle interruptions Built with a right‑hand 40° spiral and flank relief, the tool evacuates swarf effectively when creating blind holes, minimising the risk of chip jamming and tool breakage. The universal design (Form C, Type Universal) balances cutting aggressiveness and robustness, making it suitable for automatic tapping in standard machine setups. The shaft Ø 12 mm offers secure clamping in collet or chuck holders, contributing to vibration control and prolonged edge life. Together, these features support uninterrupted cycles and lower scrap rates in mixed‑material workflows. Broad material compatibility and workshop practicality The threading tool is specified for use in steel, stainless steel, spheroidal cast iron and non‑ferrous metals, providing a versatile solution for workshops that handle varied components. As a universal machine tap it reduces tool changeovers and inventory complexity without sacrificing dimensional accuracy. Marking such as the green ring aids quick identification on the tool trolley. Sourcing through Metav Werkzeuge benefits from their industry experience and logistics presence in Emmerich, which helps secure a reliable supply chain for precision tools and replacement items. For procurement, specification checks or to secure a reliable supply of TECWERK machine taps contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and prompt processing Technical data Article number: 2000867712NW Label: Machine tap DIN 376C M16×2 mm HSS‑Co TiN 6H TECWERK Pack unit: 1 Facts Thread: M16×2 mm Shaft diameter: 12 mm Spiral angle: 40° Tolerance: ISO2 (6H) Special features Material: HSS‑Co Coating: TiN Type: Universal (Form C) Application: blind holes Applicable materials: steel; stainless steel; spheroidal cast iron; non‑ferrous metals Standard: DIN 13 sheet 1 Flank relief; green ring identification; right‑hand spiral FAQ What materials can be machined with this tap? The TECWERK machine tap DIN 376C M16×2 mm is suitable for steel, stainless steel, spheroidal cast iron and non‑ferrous metals as stated in the product specification (SKU 2000867712NW). Is this tap suitable for blind‑hole tapping? Yes — the tool’s right‑hand 40° spiral and flank relief are designed specifically to evacuate chips in blind‑hole operations, improving process reliability with the TECWERK universal tap. What thread tolerance and standard does the tap achieve? This threading tool produces metric threads to ISO2 (6H) tolerance in accordance with DIN 13 (sheet 1), delivering a standardised fit for assembly and inspection purposes. What features support long tool life in continuous use? The combination of HSS‑Co substrate and TiN coating reduces wear and friction, while the universal geometry and relieved flanks lower cutting forces—properties specified for the TECWERK machine tap (2000867712NW). What is the shank size for clamping and tooling holders? The tap has a shaft diameter of 12 mm, suitable for secure clamping in typical collets or chucks used in machine tapping setups. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Reliable blind‑hole thread production with HSS‑Co5 wear resistance and ISO2 (6H) tolerance ensures consistent assemblies and reduced rework; order the machine thread tap directly via Metav Werkzeuge or consult our specialists for application advice. Machine thread tap DIN 376C M16×2 HSS‑Co5 6H (RUKO) – high‑performance Form C tap with 35° right‑hand spiral Machine thread tap DIN 376C M16×2 HSS‑Co5 6H (RUKO) is a precision machine tap designed for producing metric ISO threads in blind holes, suited to alloyed and unalloyed steels, non‑ferrous metals and malleable cast iron HSS‑Co5 with 5% cobalt for heat resistance Right‑hand 35° spiral for blind holes ISO2 (6H) tolerance for accurate fits Ensure accurate mating parts with ISO2 tolerance The tap delivers ISO2 (6H) thread quality and complies with DIN 13 standards, giving repeatable and reliable thread form for assemblies where fit and preload matter. Using a tool with defined tolerance class reduces the need for post‑processing and minimises component rejects. The controlled thread profile supports consistent torque behaviour and predictable assembly performance, which is particularly relevant for production runs and quality‑sensitive applications. Longer tool life under elevated cutting temperatures Built from HSS‑Co5 (5% cobalt), the tool sustains higher red hardness compared with standard high‑speed steels, which translates into superior wear resistance during interrupted cuts and elevated operating temperatures. This material choice extends tool life when machining materials up to 1000 N/mm² tensile strength and when tackling tougher alloys, reducing downtime for tool changes. The result is improved productivity and lower unit tool cost over the life of the cutter. Designed for efficient blind‑hole chip control The 35° right‑hand spiral and Form C geometry direct chips away from the cutting zone when forming blind‑hole threads, while the relieved flanks reduce chip packing and minimise risk of tool breakage. For machine tapping operations this configuration means fewer interferences during retract cycles and a lower incidence of damaged threads, enabling faster cycle times and higher process reliability on CNC and tapping heads. Stable clamping and machine compatibility With a 12 mm shank and right‑hand cutting direction, the tap is optimised for standard tapping holders and automatic tool changers. The compact shank diameter and standardised thread form facilitate secure clamping and concentricity, which supports consistent thread geometry across batches. Compatibility with common machine setups reduces setup time and eases integration into existing production workflows. For dependable production threading with Ruko machine thread taps, contact Metav Werkzeuge for tailored technical advice and prompt delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 4000602007NW Product name: Maschinengewindebohrer DIN 376C M16×2mm HSS‑Co5 6H RUKO Manufacturer: Ruko GmbH Packaging unit: 1 UID: 4000602007NW Core measurements Thread size: M16×2 Shank diameter: 12 mm Spiral angle: 35° Applicable tensile strength: up to 1000 N/mm² Tolerance class: ISO2 (6H) Features Material: HSS‑Co5 (5% cobalt) Form: C Spiral: right‑hand spiral for blind holes Flanks: relieved (flank ground) Thread standard: metric ISO, DIN 13 sheet 1 Application: blind‑hole threads Suitable for: unalloyed and alloyed steels, malleable cast iron, non‑ferrous metals Cutting direction: right‑hand cutting FAQ Which materials can be machined with this tap? The machine thread tap is suitable for unalloyed and alloyed steels up to 1000 N/mm², malleable cast iron and various non‑ferrous metals, thanks to its HSS‑Co5 construction. Is the tap suitable for blind‑hole threading on CNC machines? Yes, the right‑hand 35° spiral and Form C geometry are specifically designed to improve chip evacuation in blind‑hole applications during CNC tapping cycles. What tolerance and thread standard does the tool provide? The tool produces metric ISO threads to DIN 13 with ISO2 (6H) tolerance, ensuring precise and repeatable thread form for mating components. What is the shank size and mounting requirement? The tap has a 12 mm shank, compatible with standard tapping holders and automatic tool changers used in machine tapping operations. How does the HSS‑Co5 material benefit machining performance? HSS‑Co5 (5% cobalt) offers increased hot hardness and wear resistance compared with standard HSS, reducing tool wear under higher cutting temperatures and extending service life. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen

Combine robust HSS‑Co construction with the DIN‑standard geometry of Form B taps for reliable, repeatable thread production and reduced machine downtime. Order the machine tap directly via Metav Werkzeuge or ask our consultants if further technical data is required. Machine Tap DIN 376B M16x2 HSS‑Co 6H – TECWERK A Machine Tap DIN 376B M16x2 HSS‑Co 6H engineered for accurate cutting of metric ISO threads in medium‑strength steels. Cobalt‑alloy HSS for enhanced wear resistance Form B with straight flutes for reliable chip control ISO tolerance class 6H (ISO2) for accurate threads Shaft Ø 12 mm for secure machine clamping Longer service life through cobalt‑alloy material The HSS‑Co alloy used in this tool combines the cutting-edge hardness of high‑speed steel with improved thermal resistance from cobalt enrichment. This composition reduces flank wear under cyclic load and higher cutting temperatures, which translates into longer tool life and fewer tool changes in production environments. For operations where uptime and predictable maintenance intervals matter, the improved wear resistance reduces total running costs and supports a steadier production flow. Reliable threads to DIN standards for interchangeability Built to DIN 376B and following DIN 13 Blatt 1 principles, the tap produces M16x2 metric threads within the ISO2 (6H) tolerance field. That ensures consistent mating with standard components and avoids match‑fit issues in subsequent assembly. The tight tolerance control offered by this geometry supports precision applications where thread fit and repeatability are critical, providing a clear efficiency benefit during assembly and quality control processes. Geometry optimised for chip formation and through threads The Form B design with straight flutes and relieved flanks promotes predictable chip formation when cutting into carbon and alloy steels. A chamfered lead is provided specifically for through‑threading, facilitating safe chip evacuation and uniform thread starts. Rated for steels up to approximately 900 N/mm² tensile strength, the tool handles a wide range of workshop and industrial materials while preserving surface finish and dimensional accuracy during threading. Machine‑ready shank and practical compatibility Equipped with a shaft Ø 12 mm, the tap is ready for standard collet or chuck systems used in machining centres and dedicated tapping heads, enabling fast tool changes and reliable clamping. Supplied as a single unit (packaging unit: 1), the tool integrates easily into existing tooling sets and production plans. Combined with Metav Werkzeuge’s quality‑filter approach from Emmerich, the tool offers both traceability and dependable supply for series manufacture and maintenance tasks. Contact Metav Werkzeuge for a tailored technical consultation or to arrange supply of the TECWERK machine tap with assured delivery from Emmerich. Technical data Article number: 2000867346NW Item name: Machine tap DIN 376B M16x2 HSS‑Co 6H Packaging unit: 1 Core data Thread: M16 x 2 mm Shaft Ø: 12 mm Tolerance class: ISO2 (6H) Material suitability: steels up to approx. 900 N/mm² Design & features HSS‑Co material Form B, straight flutes Relieved flanks Chamfered lead for through threads DIN 376B DIN 13 Blatt 1 FAQ Which materials can be machined with this tap? The TECWERK machine tap is specified for use in steels up to approximately 900 N/mm² tensile strength and is therefore suitable for a wide range of carbon and alloy steels. Is this tap suitable for through threads? Yes — the tool has a chamfered lead designed for through‑threading, which improves chip evacuation and ensures clean thread starts. What tolerance and thread form does the tap produce? The tap produces metric ISO threads M16x2 to ISO2 (6H) tolerance, complying with DIN standards for interchangeable threads. What is the shank diameter for machine mounting? The shaft diameter is 12 mm, making the tap compatible with standard collets and chucks used in machining centres and tapping heads. What is the article number for ordering or reference? The article number is 2000867346NW for the TECWERK machine tap M16x2 HSS‑Co 6H. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co cutting material and the Form B universal geometry to achieve consistent, ISO‑compliant M16×2 threads with reduced rework and fewer tool changes; order the tap directly via Metav Werkzeuge or consult our specialists for application support. Maschinengewindebohrer DIN 376B Univ.M16x2mm HSS‑Co vap.6H TECWERK — Universal machine thread tap, HSS‑Co, M16×2, tolerance 6H The Maschinengewindebohrer DIN 376B Univ.M16x2mm HSS‑Co vap.6H TECWERK is a universal machine tap designed for producing metric ISO M16×2 threads in a wide range of materials, from steel and stainless steel to spheroidal cast iron and non‑ferrous metals. HSS‑Co for high wear resistance Universal Form B for versatile applications Vapourised finish with green ring identification M16×2 metric thread, tolerance 6H Consistent ISO threads that speed assembly The universal DIN‑standard geometry produces M16×2 threads to ISO tolerance 6H, delivering predictable fits that reduce assembly time and minimise rejected parts. Clear specification to DIN 13 Blatt 1 ensures compatibility with mating components and industry fixtures. The ISO‑aligned tolerance helps maintain interchangeability in serial production and supports quality assurance processes by providing a verifiable thread class for documentation and inspection. Durable cutting performance for longer runs Manufactured from HSS‑Co, the tool resists wear under demanding cutting conditions, extending service life and cutting downtime. The vapourised surface treatment improves flank endurance and identification in tool rooms (green ring marking), which reduces sorting errors during tool changes. Fewer tool replacements translate into lower indirect costs and a more continuous production flow when machining common workshop materials. Geometry engineered for reliable cutting and chip control Straight flutes and undercut flanks give controlled chip formation and consistent thread profile generation, while the specialised cutting chamfer facilitates through‑threading. This geometry supports clean engagement and exit in through holes, lowering the risk of thread distortion. The combination of flute design and flank relief contributes to stable torque behaviour and predictable tapping in mixed batches. Easy integration into standard setups Conforming to DIN 376B and featuring a shank Ø 12 mm, the tap fits conventional holders and machine spindles without special adaptors, simplifying tooling logistics. The universal type supports a broad application spectrum—steel, stainless steel, spheroidal cast iron and non‑ferrous metals—allowing one tool to cover multiple jobs and reducing the variety of taps stocked. This pragmatic compatibility benefits workshops that prioritise flexibility and rapid job changeovers. For detailed specification help or to secure supply of the TECWERK universal machine tap, contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich warehouse Technical Data Article number: 2000867685NW Brand: TECWERK Packaging unit: 1 Facts Thread: M16×2 Tolerance class: 6H (ISO2) Shank diameter: 12 mm Standard: DIN 376B Special features Material: HSS‑Co Form B universal type Vapourised finish Green ring identification Straight flutes Undercut flanks Cutting chamfer for through threads Metric ISO thread per DIN 13 Blatt 1 Suitable for steel, stainless steels, spheroidal cast iron and non‑ferrous metals FAQ What materials is this tap suitable for? The TECWERK machine thread tap is suitable for steel, stainless steels, spheroidal cast iron and non‑ferrous metals as stated in the product specification. What does tolerance 6H mean for thread quality? Tolerance 6H indicates the ISO tolerance class for internal threads, providing a standardised allowance that ensures reliable fit and interchangeability for M16×2 threads. Is the shank compatible with common holders? Yes; the shank Ø 12 mm and DIN 376B Form B geometry allow compatibility with standard holders and machine spindles without special adaptors. How does the vapourised finish benefit production? The vapourised surface improves wear resistance and tool identification (green ring), supporting longer tool life and easier management in multi‑tool environments. Does the tap include a specialised chamfer for through threads? The tool features a cutting chamfer designed for through‑thread applications, aiding clean exit and consistent thread form. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from high cutting performance thanks to the HSS‑Co substrate and a wear‑resistant TiN coating, combined with a universal Form B geometry that supports reliable through‑threading in mixed production runs. The tap’s 6H tolerance and DIN conformity deliver repeatable accuracy; order the machine tap directly via Metav Werkzeuge or ask our consultants if needed. TECWERK machine tap DIN 376B – Universal M16×2 mm, HSS‑Co, TiN, 6H The TECWERK machine tap DIN 376B Universal M16×2 mm HSS‑Co TiN 6H is a robust industrial tap designed for metric ISO threads in demanding workshop and production applications Universal Form B for versatile applications TiN coating for extended tool life Straight flutes with flank‑ground cutting edges Suitable for steel, stainless and non‑ferrous metals Consistent thread quality for production environments The combination of HSS‑Co substrate and a defined tolerance 6H ensures consistent thread accuracy across serial production. Compliance with DIN 13 Blatt 1 and the metric ISO thread standard for M16×2 mm means threads are comparable across parts and suppliers, reducing assembly issues. Where tight tolerance and interchangeability matter, this specification provides a verifiable basis for planning and inspection. The reliability achieved through standardisation supports lower scrap rates and predictable assembly behaviour. Extended tool life that reduces running costs A TiN coating reduces flank wear and improves surface hardness, which extends the service interval of the tap and lowers life‑cycle costs. The Form B universal geometry and straight flute design promote stable chip formation when cutting through holes; the incorporated chamfer is optimised for through‑threading. With a shaft Ø 12 mm, the tool integrates easily with standard holders, limiting changeover time in automated or manual tapping stations and contributing to more efficient tool management. Stable performance across a wide material range Designed for flexible use, the tool is suitable for steel, stainless steel, spheroidal graphite cast iron and non‑ferrous metals, offering confidence when mixes of materials are processed in the same batch. The combination of flank‑ground cutting edges and straight flutes assists chip control and minimises the risk of chip packing, particularly in blind and through‑hole operations. This stability supports consistent cycle times and helps maintain surface quality on mating components. Simplified inventory and predictable integration Adopting a universal tap that follows established standards reduces the number of tool variants required on the shop floor. The DIN conformity and clear metric specification make documentation, tool selection and replacement straightforward; the universal geometry reduces the need for specialised substitutes. Where process traceability and supplier transparency are required, the standardised tool designation supports audits and quality procedures while easing procurement. For a tailored recommendation on the TECWERK machine tap or to confirm suitability for specific materials and feed parameters, contact Metav Werkzeuge — technical advice and availability checks are provided via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 2000867703NW SKU / UID: 2000867703NW Brand: TECWERK Facts Thread: M16×2 mm Tolerance: 6H (ISO2) Shank diameter: 12 mm Packaging unit: 1 Standard: DIN 13 Blatt 1 Special features Material: HSS‑Co Coating: TiN Form: B, Universal Straight flute, flank‑ground Chamfer suitable for through‑threading Suitable for steel; stainless steel; spheroidal graphite cast iron; non‑ferrous metals Type: Machine tap DIN 376B FAQ What thread form does this tap produce? The TECWERK machine tap produces a metric ISO thread of M16×2 mm, manufactured to DIN 13 Blatt 1 with a 6H tolerance for interchangeability. Which materials can be machined with this tap? This machine tap is suitable for steel, stainless steel, spheroidal graphite cast iron and various non‑ferrous metals, thanks to its HSS‑Co composition and TiN coating. How does the TiN coating benefit tool life? The TiN coating on the TECWERK tap increases surface hardness and wear resistance, which extends service life and reduces the frequency of tool changes for serial production. What shank size is required for holders? The tap is supplied with a shaft Ø 12 mm, compatible with common machine holders and reducing the need for bespoke adaptors. Is the tap suitable for through‑hole threading? Yes, the tap includes a chamfer designed for reliable through‑threading and chip evacuation in continuous production. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co substrate for consistent cutting performance, TiCN coating for extended wear resistance and the ISO2 (6H) tolerance for reproducible metric threads; order this machine tap directly via Metav Werkzeuge or consult the specialists for application guidance. TECWERK Machine Tap DIN 376C VA M16×2 HSS‑Co TiCN 6H A TECWERK Machine Tap DIN 376C VA M16×2 designed for precise metric thread production in stainless, acid‑resistant and heat‑resistant steels, optimised for machine tapping and blind‑hole applications HSS‑Co substrate for high cutting performance TiCN coating for extended tool life ISO2 (6H) tolerance for precision threads Shank Ø 12 mm for secure machine clamping Consistent cutting performance for demanding alloys The tap is manufactured from HSS‑Co, a cobalt‑alloyed high‑speed steel that maintains hardness at elevated temperatures and under heavy cutting loads. Combined with a TiCN coating, the tool delivers improved wear resistance and reduced friction, which extends service intervals and supports higher machining productivity. For operations where cycle times and tool lifetime determine cost per thread, this configuration yields measurable efficiency gains and fewer re‑taps. Accurate metric threads that reduce assembly risk Engineered to DIN 376C and used with DIN 13 Sheet 1 thread specifications, the tool produces an M16×2 metric thread within tolerance field ISO2 (6H). The guaranteed tolerance ensures reproducible fits for fasteners and mating parts, reducing rejects and rework. By specifying this tolerance class, procurement and quality teams gain a predictable basis for assembly clearances and torque behaviour during final assembly. Machine‑ready geometry for blind‑hole tapping Designed as Form C / Type VA, the tap features a right‑hand 40° helix and flanks ground for reliable chip formation when producing blind‑hole threads. The helix angle and flank treatment promote chip evacuation towards the shank, lowering the risk of chip packing in blind bores. With a shank Ø 12 mm, the tool mounts securely in standard machine holders and supports consistent concentricity for series production. Supply reliability and application support from Metav Sourced under the TECWERK designation and supplied through Metav Werkzeuge, this tap fits the product strategy of democratised precision: accessible high quality, supported by a European distribution base in Emmerich that acts as a quality filter. Metav’s broad range and industrial expertise simplify sourcing decisions for workshops and production facilities, while the availability of application advice helps integrate the tap into specific process chains. For production tasks requiring reliable high‑alloy tapping, request the TECWERK M16×2 machine tap from Metav Werkzeuge in Emmerich for availability and application recommendations — info@metav-werkzeuge.com • +49 2822 7131930 Technical Data SKU: 2000867398NW Product: Machine tap DIN 376C VA M16×2 HSS‑Co TiCN 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867398NW Facts Thread: M16×2 mm Helix angle: 40° right‑hand Shank diameter: 12 mm Suitable for steels up to 1000 N/mm² tensile strength Tolerance: ISO2 (6H) Standard: DIN 13 Sheet 1 / DIN 376C Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: TiCN Form C, Type VA Flanks ground (flank honing) For blind‑hole threads Blue ring identification FAQ What materials can this tap process? The TECWERK machine tap is specified for stainless, acid‑resistant and heat‑resistant steels up to 1000 N/mm² tensile strength and is made from HSS‑Co with a TiCN coating to handle demanding alloys. Is the tool suitable for blind holes? Yes, the Form C / Type VA geometry and 40° right‑hand helix are designed specifically to improve chip control and reliability when producing blind‑hole threads. Which tolerance and standard does the tap meet? The tap produces M16×2 threads to ISO2 (6H) tolerance and complies with DIN 13 Sheet 1 and DIN 376C specifications for machine taps. What shank diameter is required for mounting? The tool has a shank Ø 12 mm, suitable for standard machine tap holders and rigid clamping systems used in automated machining centres. How does the TiCN coating benefit production? The TiCN coating reduces friction and wear, improving tool life and allowing higher productivity rates compared with uncoated counterparts. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co construction, right‑hand spiral geometry and ISO tolerance to ensure consistent thread quality and reduced rework in serial production; order directly via Metav Werkzeuge or consult the Metav specialists for application-specific recommendations. Machine thread tap DIN 376C M16×2 HSS‑Co 6H – TECWERK Machine thread tap DIN 376C M16×2 HSS‑Co 6H is a spiral‑fluted, right‑hand machine tap designed for producing metric ISO blind threads in medium‑strength steels. HSS‑Co for increased heat resistance Right‑hand spiral 40° for efficient chip evacuation Tolerance ISO2 (6H) for precise metric threads Suitable for blind holes in steels up to 900 N/mm² High‑precision threads with durable cobalt HSS The machine tap is manufactured from HSS‑Co, a cobalt‑alloyed high‑speed steel that improves hot hardness and wear resistance compared with standard HSS. This material choice maintains cutting edge stability during continuous operation and supports higher cutting parameters, which in turn reduces tool change frequency and downtime. The DIN 376C specification and ISO2 (6H) tolerance ensure the resulting threads meet established metric standards, providing reliable interchangeability and minimising rejects in production. Efficient chip control and blind‑hole performance Built in Form C with a right‑hand spiral 40°, the tool promotes axial chip evacuation into the flutes rather than back into the hole, which is particularly advantageous for blind hole applications. The flanks are relieved to aid entry and reduce friction during tapping; this lowers torque peaks and diminishes the risk of tap breakage. For workshops machining steels of up to 900 N/mm², this geometry balances cutting action and chip removal to achieve a consistent surface finish and thread profile while reducing operator adjustments. Workshop compatibility and practical handling The tap features a shank Ø 12 mm, compatible with common machine holders and quick‑change systems, enabling fast tool set‑up and secure clamping during automated or manual use. The specification aligns with DIN 13 sheet 1 for metric threads, simplifying quality control and documentation. By selecting a tool optimised for blind threads and using HSS‑Co, workshops benefit from predictable tool life, fewer rejects and a lower cost per thread in medium‑series production runs. Contact Metav Werkzeuge for tailored technical advice and availability — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000867386NW Product name: Maschinengewindebohrer DIN 376C M16x2mm HSS-Co 6H TECWERK Packaging unit: 1 Facts Thread size: M16×2 Shank diameter: Ø 12 mm Spiral angle: 40° Material capability: steels up to approx. 900 N/mm² Special features Material: HSS‑Co Form C Right‑hand spiral 40° Flanks relieved Metric ISO thread (DIN 13 sheet 1) Tolerance: ISO2 (6H) Designed for blind holes FAQ Which materials can be machined with this tap? This tap is designed for machining steels up to approx. 900 N/mm²; the HSS‑Co composition provides the necessary hot hardness for these applications. Is the tool suitable for blind holes? Yes, the spiral geometry and relieved flanks of the TECWERK machine thread tap make it particularly suitable for blind hole thread production. What does the tolerance ISO2 (6H) mean for production? The ISO2 (6H) tolerance specifies a standard metric internal thread tolerance that ensures interchangeability and reliable fit with mating external threads produced to the same tolerance class. How does the 40° spiral affect performance? The right‑hand spiral 40° promotes axial chip evacuation away from the hole bottom, reducing chip congestion and the risk of tap breakage in blind holes. What machine holders are compatible with the tap? With a shank Ø 12 mm, the tap fits standard holders and quick‑change systems used in milling machines, tapping heads and CNC tapping units. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining a cobalt high‑speed steel (HSS‑Co) substrate with a TiN surface layer and ISO metric M16×2 accuracy results in a robust tool for reliable blind‑hole thread production; the Machine Tap DIN 376C M16x2mm HSS‑Co TiN (6H) TECWERK ensures repeatable tolerances and long service life. Order directly via Metav Werkzeuge or consult the technical team for application advice. Machine Tap DIN 376C M16x2mm HSS‑Co TiN (6H) – TECWERK The Machine Tap DIN 376C M16x2mm HSS‑Co TiN (6H) is a Form C machine tap with a TiN coating, right‑hand 40° helix and a 12 mm shank, designed for producing ISO metric blind threads in medium‑strength steels. Cobalt HSS substrate for high toughness TiN coating for extended tool life ISO metric M16×2, tolerance 6H Optimised for blind holes in steels ≤1000 N/mm² Consistent threads for blind‑hole applications This tap is engineered for precise ISO metric threads in blind holes, where chip evacuation and thread integrity are critical. The combination of a right‑hand 40° helix and relieved flanks reduces chip packing in the root of the hole, so threads are formed cleanly and consistently. The DIN 376C Form C geometry is intended for machine tapping operations, enabling reliable positioning and repeatable results when fitted into a standard machine holder with the 12 mm shank. Durable substrate and coating for longer service life Manufactured from HSS‑Co (cobalt high‑speed steel) and finished with a TiN (titanium nitride) layer, the cutter resists wear under cyclic thermal and mechanical loads. The cobalt alloy core provides improved toughness over standard HSS, reducing chipping risk in interrupted cuts, while the TiN coating lowers friction and protects cutting edges. Together these features extend runtime between regrinds, supporting higher productivity and lower tool‑change frequency. Precision fit and tolerance assurance With tolerance field ISO2 (6H) and compliance with DIN 13 sheet 1, the tap guarantees thread accuracy for assembly and functional fits. The metric M16×2 profile meets common engineering standards, making the part suitable for components requiring standardised screw connections. Traceable manufacturing to the DIN references supports quality control processes and simplifies inspection routines in production environments. Practical use and material suitability Designed for blind‑hole threading in steels up to 1000 N/mm², this tool is appropriate for a broad range of general engineering and workshop tasks. The Form C design suits machine‑mounted tapping where axial runout and clamping are stable. Handling recommendations: ensure correct machine feed and suitable cutting fluid for the workpiece material to maintain edge life and thread finish. The 12 mm shank provides compatibility with common collet and chuck systems. Contact Metav Werkzeuge for a tailored recommendation or to verify machine compatibility; technical advice and order support are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867319NW Label: Maschinengewindebohrer DIN 376C M16x2mm HSS‑Co TiN 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M16×2 Tolerance field: 6H (ISO2) Shank diameter: 12 mm Helix: right‑hand 40° Material strength suitability: steels up to 1000 N/mm² Special features Material/coating: HSS‑Co, TiN coating Form: Form C, DIN 376C Flank treatment: relieved flanks Application: blind‑hole threads Standard: ISO metric thread, DIN 13 sheet 1 FAQ What materials can be threaded with this tap? The Machine Tap DIN 376C M16x2mm HSS‑Co TiN (6H) is specified for use in steels up to 1000 N/mm²; the HSS‑Co substrate and TiN coating improve performance in medium‑strength steels. Is this tap suitable for through holes as well as blind holes? While optimised for blind‑hole production, the DIN 376C Form C geometry will also perform in through‑hole operations, though chip evacuation behaviour differs. Which tolerance can be expected from the threads? Threads produced with this TECWERK tap conform to tolerance field 6H (ISO2), supporting standard assembly fits and interchangeability in metric systems. What shank size is required for mounting? The tap has a 12 mm shank, compatible with common collet and chuck holders used in machine tapping fixtures. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of HSS‑Co strength and a TiCN coating combined with a chip‑splitting lead for durable, reliable thread production; order directly via Metav Werkzeuge or consult the specialists for application advice. Machine tap DIN 376B VA M16x2 HSS‑Co TiCN (6H) — TECWERK A machine tap DIN 376B VA M16x2 designed for producing metric through‑threads in stainless, acid‑ and heat‑resistant steels up to 1000 N/mm² tensile strength HSS‑Co material for enhanced toughness TiCN coating for extended tool life Straight flute, flanks ground for clean chips For metric M16x2 through‑threads, ISO2 (6H) Consistent performance for challenging materials The TECWERK machine tap (DIN 376B) combines HSS‑Co substrate hardness with a TiCN surface finish to deliver extended service life when cutting demanding alloys. Rated for steels with tensile strengths up to 1000 N/mm², the tool resists abrasive wear and maintains cutting geometry over long production runs. The shear‑cut lead (Schälanschnitt) is designed for through‑threads, reducing chip size and lowering the risk of jamming during automated tapping cycles. This results in fewer interruptions on the machine and a higher first‑pass yield for series production. Precision fit and repeatability for assembly reliability Built to DIN 376B and producing metric threads to ISO2 (6H) tolerance, the tap guarantees repeatable internal thread dimensions in accordance with DIN 13 sheet 1. The flanks ground finishing improves thread form and mating accuracy, which reduces the need for post‑processing and minimises component rejection. For workshops and manufacturers that prioritise tight assembly tolerances, this tool enables consistent fastening behaviour and predictable torque characteristics when paired with matching bolts and screws. Productivity and handling optimised for the workshop floor The tool’s straight flute geometry and visible blue ring coding ease identification and support controlled chip flow for through‑thread applications; the shaft Ø 12 mm provides secure clamping in standard holders. Together these characteristics improve cycle stability during machine tapping and simplify tool changeover. The tap’s construction balances toughness and sharpness, so downtime from tool failure is reduced and throughput rises — a clear operational advantage for busy production environments where reliable, repeatable tapping is essential. Speak to Metav Werkzeuge for tailored advice on the TECWERK machine tap and fast, dependable supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 2000867429NW Product label: Maschinengewindebohrer DIN 376B VA M16x2mm HSS‑Co TiCN 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M16 x 2 mm Shaft Ø: 12 mm Tensile strength suitability: up to 1000 N/mm² Tolerance class: ISO2 (6H) Special features HSS‑Co substrate Form B / Type VA TiCN coated Blue ring identification Straight‑fluted geometry Flanks ground Metric ISO thread to DIN 13 sheet 1 Shear‑cut lead for through‑threads Suited for stainless, acid‑ and heat‑resistant steels FAQ What materials can this machine tap process? The TECWERK machine tap is suitable for stainless, acid‑resistant and heat‑resistant steels and is specified for materials with tensile strengths up to 1000 N/mm². Which thread and tolerance does the tap produce? The tap produces a metric M16 x 2 thread to ISO2 (6H) tolerance in accordance with DIN 13 sheet 1, ensuring standardised internal thread accuracy. Is the tool coated and what benefit does the coating provide? Yes, the tap features a TiCN coating which enhances surface hardness and wear resistance, extending tool life under continuous production conditions. What clamping dimensions are required for safe operation? The tool has a shaft diameter of 12 mm; secure clamping in a suitable tool holder matching this diameter is recommended for stable tapping. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund