Combining HSS‑Co cutting grade with a secure 6.3 mm (1/4") HexDrive shank and ISO2 (6H) tolerance, this machine tap bit ensures repeatable M8 threads for through‑thread applications; order the item directly via Metav Werkzeuge or consult the technical team for integration into production. Machine Tap Bit HSSE M8 x 6.80 mm, 1.25 mm pitch — HSS‑Co, 1/4" HexDrive (VÖLKEL) A Machine Tap Bit HSSE M8 x 6.80 mm, 1.25 mm pitch engineered for efficient through‑thread tapping in unalloyed and low‑alloy steels up to 900 N/mm² HSS‑Co cutting material for extended life 1/4" hex shank for secure machine mounting DIN 371 Form B for through‑thread applications ISO2 (6H) tolerance for metric ISO threads Consistent metric threads with high cutting performance The tap bit is manufactured from HSSE (HSS‑Co), a high‑speed steel alloyed with cobalt to retain hardness at elevated temperatures and extend tool life under continuous machining. With a nominal M8 thread form and ISO2 (6H) tolerance, the component provides a precision fit suitable for assembly and mass production. Conformance to WN (DIN 371) ensures compatibility with common metric thread standards, while the 90 mm overall length gives sufficient engagement for stable cutting without excessive overhang. These technical choices translate into predictable part tolerances and reduced rework in series production. Secure drive and machine‑friendly design for fast set‑ups Equipped with a HexDrive system and a 6.3 mm (1/4") hex shank, the bit mounts reliably in powered holders and quick‑change adapters, minimising slippage and downtime during tool changes. The Form B design with a specialised chamfer is optimised for through‑thread operations, evacuating chips effectively to maintain cutting stability. The robust drive interface paired with the chip‑directing geometry results in shorter set‑up times and steadier cycle performance on automatic tapping heads and CNC spindle drives. Material range, handling and workshop advantages Designed for the general machining of unalloyed and low‑alloy steels up to 900 N/mm², the tap bit is suited for maintenance shops and production lines that require durable threading solutions. The HSSE composition improves resistance to abrasive wear and allows higher cutting speeds compared with standard HSS, reducing cycle time per hole when conditions permit. The built‑in chamfer for through threads supports clean starts and less thread distortion, so parts leave the process ready for assembly. For less technical stakeholders, HSSE simply means greater endurance and fewer tool changes over a production run. For precision M8 tapping with HSS‑Co endurance, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s consultants will evaluate compatibility with existing production systems and delivery schedules Technical Data Article number: 4000868076NW Description: Maschinengewindebohrer-Bit HSSE 8 M8x6,80mm Steig.1,25mm VÖLKEL Packaging unit: 1 Core figures Length: 90 mm Shank: 6.3 mm (1/4") Thread size: M8 × 1.25 mm Tolerance: ISO2 (6H) Special features Cutting material: HSSE (HSS‑Co) Design: Form B; WN (DIN 371) HexDrive system with 6.3 mm hex shank For through‑thread applications; with cutting chamfer Suitable for unalloyed and low‑alloy steels up to 900 N/mm² FAQ What materials is this tap bit suitable for? The Machine Tap Bit HSSE M8 x 6.80 mm is intended for unalloyed and low‑alloy steels and is rated for use up to approximately 900 N/mm², offering reliable performance in typical workshop and industrial applications. What does HSSE mean and why is it used here? HSSE denotes high‑speed steel with cobalt; the cobalt content increases red hardness and wear resistance, so the VÖLKEL tap bit maintains cutting performance at higher temperatures and delivers longer tool life than standard HSS. Is the shank compatible with standard tool holders? Yes, the included 6.3 mm (1/4") hex shank and HexDrive system are compatible with common machine holders and quick‑change chucks, providing a secure connection for automated tapping heads and hand‑held drivers. Does the tap conform to recognised thread standards? The tool is produced to WN (DIN 371) specifications and achieves a metric thread tolerance of ISO2 (6H), ensuring interchangeability with standard metric components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of HSS‑Co material, a Whitworth G thread to DIN ISO 228, and a robust 36 mm shank for consistent, machine-ready pipe threads; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Machine pipe tap DIN 5156B G 1 1/2 in x 11 HSS‑Co ISO 228 by TECWERK — straight‑flute form B for through Whitworth pipe threads The Machine pipe tap DIN 5156B G 1 1/2 in x 11 HSS‑Co is designed for producing parallel Whitworth pipe threads (G) to DIN ISO 228 in through-hole applications, suitable for a range of steels and temper cast iron. HSS‑Co for elevated heat resistance Whitworth G thread to DIN ISO 228 Straight flutes with flank grinding Shank Ø 36 mm for secure machine mounting Consistent Whitworth pipe threads for standard fittings The tap produces Whitworth G pipe threads manufactured to DIN ISO 228, which ensures compatibility with standard parallel pipe fittings. This conformity simplifies assembly and inspection in production environments where interchangeability is essential. The thread form is particularly suited to through threads, allowing a clean, continuous cut along the workpiece. The standardised geometry reduces the risk of mis-mating and supports consistent sealing performance when used with appropriate seals or gaskets. Durable cutting edge and controlled chip formation Made from HSS‑Co, the tool offers improved red‑hardness and wear resistance compared with conventional high‑speed steels, supporting longer tool life in demanding operations. The Form B design with straight flutes and flank‑ground cutting edges promotes reliable chip evacuation in long through threads, lowering the risk of jamming and breakage. For workshops processing steels up to approximately 1000 N/mm² and temper cast iron, this combination yields repeatable thread quality while keeping regrind intervals predictable. Machine-ready shank and operational reliability A 36 mm shank diameter provides a stable connection to tapping heads and machine spindles, reducing runout and helping maintain concentricity throughout the machining cycle. The robust shaft geometry is intended for mechanical tapping or power tapping attachments, enabling efficient high‑volume production. Correct clamping and alignment, combined with adequate cutting fluid, will preserve the cutting geometry and improve cycle consistency for serial manufacturing. Workshop supply and service that supports precision Selecting a TECWERK tap via Metav aligns product quality with dependable supply: Metav’s Emmerich location functions as a quality filter for the European market, supplying precision tools alongside expert advice. The proposition combines a broad product range with traceable standards and prompt availability, which benefits procurement strategies that prioritise uptime and predictable tool performance. This approach reduces supplier multiplicity and simplifies reordering in industrial and trade workshops. For reliable Whitworth pipe threads, order the TECWERK machine pipe tap through Metav Werkzeuge in Emmerich or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for application guidance Technical Data Article number: 2000867507NW Designation: Machine pipe tap DIN 5156B G 1 1/2 in x 11 HSS‑Co ISO 228 Manufacturer: TECWERK Packing unit: 1 Facts Shank diameter: 36 mm Thread: G 1 1/2 in × 11 Material grade: HSS‑Co Standard: DIN 5156B, DIN ISO 228 Special features Form B Straight flutes Flank‑ground cutting edges Whitworth pipe thread G to DIN ISO 228 For through threads Suitable for steels up to approx. 1000 N/mm² and for temper cast iron FAQ What materials can this tap machine? The TECWERK machine pipe tap is suitable for steels up to approximately 1000 N/mm² and for temper cast iron, as stated in the technical data. Is this tap suitable for through holes or blind holes? This tap is designed for through threads and is optimised for uninterrupted chip evacuation in through‑hole applications. Which thread standard does the tool follow? The tool produces Whitworth G threads to DIN ISO 228, ensuring compatibility with standard parallel pipe fittings. What advantages does HSS‑Co offer for this tap? HSS‑Co provides higher red‑hardness and improved wear resistance, which increases tool life under the thermal and mechanical loads typical of pipe‑thread cutting. What machine interface does the tap require? The tap has a 36 mm shank for secure clamping in tapping heads or machine spindles, supporting stable operation and reduced runout. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of high-performance HSS‑Co cutting geometry and a vapourised finish for consistent pipe-thread quality in demanding materials; the combination reduces wear and keeps machining times predictable. Order the tool directly via Metav Werkzeuge or consult the advisers for specification matching. Machine Tap DIN 5156B VA G 1/2" x 14 HSS‑Co vapourised ISO 228 by TECWERK A robust Machine Tap DIN 5156B VA G 1/2" x 14 designed to produce Whitworth (BSPP) pipe threads in through-hole applications and for hard-to-machine alloys HSS‑Co with vapourised finish Whitworth pipe thread G per DIN ISO 228 Suitable for stainless and heat-resistant steels Reliable performance on hard-to-machine materials The cobalt-alloy HSS‑Co construction delivers sustained cutting hardness at elevated temperatures, making the tap well suited for stainless steels and other difficult alloys. The vapourised finish improves surface hardness and reduces built-up edge, which in turn lowers friction and extends tool life. For production runs where consistency matters, this combination of material and surface treatment supports steady cycle times and predictable regrind intervals. Precise pipe-thread form and stable chip control Designed for the BSPP G thread form in accordance with DIN ISO 228, the tool creates accurate sealing threads for fluid and gas systems. The straight flutes assist evacuation in through-threading operations while the flank relief (flank ground) maintains clear cutting geometry on the thread profile. These features reduce the risk of thread deformation and ensure repeatable fits in assemblies that demand tight tolerances. Machine compatibility and clamping advantages With a 16 mm shank the tap integrates into standard collet or chuck systems used on machining centres and tapping heads. The tool’s Form B specification suits machine tapping where axial alignment and controlled feed are required. Because the tap is intended for through holes, thread forming and extraction are simplified; the design helps avoid thread breakage and supports straightforward chip flow during plunge-and-retreat cycles. Practical benefits for workshop workflows Using this tap for pipelines and connection threads in resistant materials reduces secondary rework and increases first-pass yield. The vapourised surface and cobalt alloy composition mean fewer tool changes for many stainless‑steel tasks, which contributes to predictable scheduling and lower downtime. When combined with Metav’s supply chain reliability, the result is less administrative effort and a steady stock supply for recurring production needs. Contact Metav Werkzeuge for application advice or to request the TECWERK machine tap with HSS‑Co and vapourised finish for demanding pipe-threading tasks; Metav Werkzeuge can confirm compatibility and delivery from Emmerich Technical Data Article number: 2000867496NW Description: Machine tap DIN 5156B VA G 1/2" x 14 HSS‑Co vapourised ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Shank diameter: 16 mm Thread size: G 1/2" x 14 tpi Intended for: through threads Material: HSS‑Co Tensile strength of workpiece: > 850 N/mm² (suitable) Special features Form: DIN 5156B (Form B) Type: VA Surface: nitride and vapourised (vapourised finish) Marking: blue ring Flute: straight fluted Cutting geometry: flank relief (flank ground) Thread standard: Whitworth pipe thread G per DIN ISO 228 Application: for hard-to-machine materials such as stainless, acid- and heat-resistant steels FAQ What thread standard does this tap produce? The tap produces Whitworth pipe threads (BSPP) in accordance with DIN ISO 228; the specification for the Machine Tap DIN 5156B VA G 1/2" x 14 ensures compatibility with standard G‑thread fittings. Is the tap suitable for stainless steel and other high-tensile materials? Yes. The TECWERK machine tap with HSS‑Co and vapourised surface is intended for hard-to-machine materials, including stainless and heat-resistant steels with tensile strength above 850 N/mm². Can the tap be used for blind holes? This tool is designed for through threads; for blind-hole tapping a different chamfer or tap geometry is recommended to manage chip evacuation. What shank size is required for clamping? The tap has a 16 mm shank, compatible with standard collets and chucks commonly used on machining centres and tapping heads. How does the vapourised finish benefit production? The vapourised finish increases surface hardness and reduces friction and built-up edge, leading to longer tool life and more consistent cycle times when threading resistant materials. Is this tap suitable for automatic machine tapping? Yes. The Form B geometry and straight flutes make the tool appropriate for machine tapping applications where controlled feed and axial alignment are provided. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co wear resistance and precise thread form for consistent production results; the solid 16 mm shank ensures secure clamping and stable machining. Order the TECWERK machine tap directly via Metav Werkzeuge or contact their consultants for tailored technical advice. TECWERK machine tap DIN 5156B G 1/2" × 14 HSS‑Co The TECWERK machine tap DIN 5156B G 1/2" × 14 HSS‑Co is a machine tap designed for cutting parallel Whitworth pipe threads in through‑hole applications, suitable for steels and malleable cast iron under industry conditions. HSS‑Co construction for increased tool life Straight fluted Form B for reliable chip removal Whitworth pipe thread G to DIN ISO 228 standard For steels up to 1000 N/mm² and malleable cast iron Precision and durability for continuous production The HSS‑Co composition delivers improved red hardness and abrasion resistance compared with standard high‑speed steels, resulting in longer service life under higher temperatures. Combined with a solid 16 mm shank, the tool provides stable clamping and reduced vibration in powered tapping machines, which supports consistent thread geometry and dimensional repeatability. These material and design choices translate directly into fewer tool changes and predictable tool life for production runs. Consistent thread form and improved surface quality The Form B geometry with straight flutes is optimised for through threads, promoting effective chip escape and uniform cutting action across each thread flute. The flanks are honed (flanks honed) to remove micro‑burrs and to moderate the cutting edge, improving surface finish and thread fit. By conforming to DIN ISO 228 for Whitworth pipe thread G, compatibility with standard parallel pipe fittings is ensured, reducing the risk of assembly issues and rework. Efficient chip evacuation and machining reliability Straight‑fluted taps are particularly advantageous where chips must be ejected through the workpiece rather than consolidated in the flute. This chip evacuation behaviour reduces the likelihood of tap breakage in deeper through holes and keeps cycle times stable. The tool’s geometry and heat‑resistant alloy facilitate reliable performance even during longer sequences, which helps maintain throughput while protecting machine spindles and tapping holders from undue load. Broad applicability and concise specification Intended for cutting parallel pipe threads G 1/2" with 14 tpi (threads per inch), the tap is specified for use in carbon and alloy steels up to approximately 1000 N/mm² tensile strength and in malleable cast iron, making it suitable for many maintenance, repair and production environments. The adherence to standard dimensions and thread form supports interchangeability across assemblies. If uncertainty remains about specific use cases or machine compatibility, Metav Werkzeuge’s technical team can provide additional data and recommendations. Contact Metav Werkzeuge for availability and technical consultation on TECWERK HSS‑Co machine taps — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and supply options. Technical data Article number: 2000867503NW Manufacturer: TECWERK Product label: Maschinengewindebohrer DIN 5156B G 1/2 Zollx14 HSS‑Co ISO 228 TECWERK Packaging unit: 1 Data Shank diameter: 16 mm Thread: G 1/2" × 14 tpi Application tensile strength: up to approx. 1000 N/mm² Special features Material: HSS‑Co Form: B, straight fluted Flank treatment: flanks honed Application: through threads, Whitworth pipe thread to DIN ISO 228 Suitable materials: steel, malleable cast iron FAQ What does Form B mean for tapping performance? Form B indicates a straight‑fluted geometry suitable for through‑hole taps; the TECWERK tap with Form B promotes reliable chip evacuation and steady cutting action in longer through threads. Which materials can this tap machine effectively? The TECWERK HSS‑Co tap is specified for steels up to approximately 1000 N/mm² tensile strength and for malleable cast iron, making it suitable for a wide range of mechanical and hydraulic components. Is the G 1/2" thread compatible with standard pipe fittings? Yes; the G 1/2" thread to DIN ISO 228 is a parallel Whitworth pipe thread standard, ensuring compatibility with fittings designed to that specification when used with appropriate sealing methods. What advantages does the HSS‑Co alloy provide? HSS‑Co offers higher red hardness and wear resistance compared with conventional HSS, which improves tool life and dimensional stability of threads under elevated temperatures and continuous operation. Can this tap be used for blind holes? This specific tap is optimised for through threads; for blind holes a dedicated tap geometry designed to control chip formation in enclosed cavities is recommended. Manufacturer / Responsible: NORDWEST Handel AG; Robert‑Schuman‑Straße 17; 44263 Dortmund

Benefit from durable cutting performance and reliable thread form from a combination of HSS‑Co construction, a vaporised and nitride finish, and a right‑hand 40° spiral geometry; order the tap directly via Metav Werkzeuge or consult the Metav team for material‑specific guidance. Machine Tap DIN 5156C VA G 1/2" x14 (HSS‑Co, vaporised) – TECWERK The Machine Tap DIN 5156C VA G 1/2" x14 is a spiral machine tap designed to cut Whitworth pipe threads (G) in blind holes and to perform in hard‑to‑machine, corrosion‑resistant steels and heat‑resistant alloys HSS‑Co construction for high wear resistance Vaporised and nitride surface finish Right‑hand 40° spiral for efficient chip evacuation Designed for Whitworth pipe thread G 1/2" x14 Proven performance for demanding materials This spiral machine tap combines HSS‑Co substrate hardness with a vaporised and nitride surface treatment to extend tool life when machining difficult alloys. The cobalt‑enriched high‑speed steel provides increased hot hardness and improved wear resistance compared with standard HSS; this makes the tool suitable for corrosion‑resistant and heat‑resistant steels with tensile strengths above 850 N/mm². The result is consistent thread geometry and longer intervals between tool changes, which contributes to reduced production interruptions and lower per‑part machining costs. Accurate pipe threads and reliable blind‑hole tapping The geometry conforms to DIN ISO 228 for Whitworth pipe threads and is optimised for blind‑hole applications. A flank relief ground on each thread flank ensures clean thread form and reduced friction during thread generation, which improves assembly fit and sealing performance in downstream processes. The combination of G 1/2" x14 thread form and precise flank grinding reduces rework and ensures predictable torque values during assembly, supporting both quality assurance and process reproducibility on the shop floor. Geometry and surface finish that keep production moving A right‑hand 40° spiral with chip‑control features evacuates chips effectively from blind holes, lowering the risk of clogging and breakage. The shank is sized at 16 mm for secure clamping in machines and adapters, while the visible blue ring facilitates quick identification in tool racks. The vapour‑treated surface provides improved sliding behaviour and resistance to built‑up edge formation, which, combined with the spiral flute and ground flanks, promotes steady cutting action and predictable tool life. For complex workpieces or mixed batch production, the tap’s robust design offers a balance of performance and serviceability, with Metav’s specialists available for technical clarification if required. Contact Metav Werkzeuge for tailored application support or to request material‑specific recommendations and availability; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 2000867569NW SKU / UID: 2000867569NW Designation: Machine Tap DIN 5156C VA G 1/2" x14 HSS‑Co vaporised (TECWERK) Manufacturer brand: TECWERK Packing unit: 1 Facts Shank diameter: 16 mm Thread form: G 1/2" x14 (Whitworth pipe thread) Spiral helix: 40° right‑hand Capability: for blind‑hole tapping Suitable tensile strength: > 850 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Type: Form C, VA variant Surface: nitride and vaporised finish Flank relief: ground for precise thread form Identification: blue ring Standard: DIN ISO 228 Application focus: hard‑to‑machine and corrosion‑resistant steels FAQ What materials can this tap machine effectively cut? The machine tap is specified for hard‑to‑machine and corrosion‑resistant steels, including heat‑resistant grades with tensile strengths above 850 N/mm²; the HSS‑Co substrate and surface treatments support these applications. Is the thread form suitable for sealing applications? Yes. The tap produces G (Whitworth pipe) threads to DIN ISO 228, delivering consistent flank geometry and surface quality that aid sealing when combined with appropriate assembly procedures. Can the tap be used in blind‑hole operations without special chip extraction? The right‑hand 40° spiral and flute geometry are designed to evacuate chips from blind holes efficiently, reducing clogging and the likelihood of tool failure during blind‑hole tapping. What clamping size is required for this tap? A shank diameter of 16 mm is provided for secure machine clamping; compatibility with standard holders and adaptors should be verified before use. Does the surface treatment improve tool life? The combined nitride and vaporised surface finish reduces friction and built‑up edge formation, which typically results in longer tool life and more predictable wear behaviour in demanding materials. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from a durable HSS‑Co construction with a nitride and vapourised surface for longer tool life and consistent thread quality; engineered for Whitworth G 1/4" pipe threads and through‑hole applications in hard‑to‑machine stainless and heat‑resistant steels. Order the part directly via Metav Werkzeuge or consult Metav specialists for application guidance. Machine tap DIN 5156B VA — G 1/4" x 19, HSS‑Co, vapourised (TECWERK) A Machine tap DIN 5156B VA G 1/4" x 19 HSS‑Co vapourised is designed for forming Whitworth pipe threads (G) in through‑holes, with geometry and surface treatment optimised for tough, heat‑resistant materials HSS‑Co construction for high wear resistance Nitride and vapourised surface for extended life Straight flute with flank relief for reliable chip control Whitworth G 1/4" thread, suitable for through holes Consistent performance in hard‑to‑machine materials The combination of HSS‑Co substrate and nitride plus vapourised surface treatment delivers improved resistance to abrasion and thermal wear, which matters when machining stainless and heat‑resistant steels with tensile strengths above 850 N/mm². This composition reduces flank wear and lowers the frequency of regrinds, meaning fewer tool changes and less unplanned machine downtime. For production environments, the result is a more reliable cycle time and predictable component tolerance achievement. Accurate Whitworth pipe threads with standard conformity Designed to produce Whitworth G pipe threads in accordance with ISO 228 and the DIN 5156B form, the geometry ensures proper thread form and assembly fit for piping and hydraulic connections. The designation for through‑thread applications supports uninterrupted chip evacuation and consistent form across the full length of the thread. Specifying a tap that complies with recognised standards reduces rework and supports interchangeability across suppliers and assemblies, which is critical for serviceable joints and sealing reliability. Geometry and surface finish that aid machining quality The tool’s straight‑flute design, combined with flank relief (flank‑honed) and a visible blue ring identification, improves chip flow for through‑hole tapping and reduces the risk of jamming. The vapourised finish is a thin, thermally deposited layer that enhances surface hardness and lowers friction without altering core toughness, which helps to maintain thread accuracy during long runs. A shank diameter of 11 mm provides stable clamping in standard holders, enabling repeatable concentricity and reducing run‑out that can otherwise affect thread quality. Practical advantages at the workshop and on the shop floor For workshops dealing with corrosive or high‑temperature alloys, this tool brings a balance of wear resistance and cutting reliability. The specified configuration—Form B, Type VA—is particularly suitable where machining of corrosion‑resistant steels is frequent. Fewer tool changes and predictable tool life translate into lower process costs over time, while the tool’s compatibility with standard tapping fixtures simplifies integration into existing workflows. For users requiring verifiable performance, the technical conformity and material choice support long‑term production planning and quality assurance. Choose the TECWERK HSS‑Co machine tap via Metav Werkzeuge for robust, standard‑compliant Whitworth pipe threading; contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867494NW Brand: TECWERK Packaging unit: 1 Label: Machine tap DIN 5156B VA G 1/4" x 19 HSS‑Co vapourised Numbers / Core technical data Shank diameter: 11 mm Thread pitch: 19 tpi (threads per inch) Nominal thread: G 1/4" Standard: DIN 5156B, ISO 228 Special features Material: HSS‑Co Type: VA, Form B Surface: nitride and vapourised finish Flute: straight flute Flanks: flank‑relieved (flank‑honed) Identification: blue ring Application: through threads Suitable for: hard‑to‑machine materials, e.g. stainless and heat‑resistant steels > 850 N/mm² FAQ What materials is this tap suitable for? The TECWERK machine tap is designed for hard‑to‑machine materials, including stainless and heat‑resistant steels with tensile strengths above 850 N/mm², thanks to its HSS‑Co composition and surface treatments. Is the thread form compatible with common pipe fittings? Yes, the tool produces Whitworth G pipe threads in accordance with ISO 228 and DIN 5156B, ensuring compatibility with standard pipe fittings and assemblies. How does the vapourised finish help in production? The vapourised finish provides a thin, hard surface layer that reduces friction and wear, improving tool life and maintaining thread dimensional stability during longer production runs. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a HSS‑Co construction and flank‑ground cutting geometry for durable, accurate Whitworth pipe threading; the straight‑fluted Form B design ensures consistent chip evacuation and reliable performance in through‑hole applications. Order directly via Metav Werkzeuge or consult our specialists for technical guidance and fast supply from Emmerich. Machine pipe tap DIN 5156B G 1/4" x 19 HSS‑Co ISO 228 – TECWERK The machine pipe tap DIN 5156B G 1/4" x 19 (HSS‑Co) is a dedicated Whitworth parallel pipe thread tap for through threads, engineered for use in steels up to c. 1000 N/mm² and in malleable cast iron. HSS‑Co high‑speed cobalt steel construction Straight fluted Form B for stable chip evacuation Flank‑ground cutting edges for precise threads For Whitworth G threads to ISO 228, through‑hole use Durable, wear‑resistant cutting for industrial production The combination of HSS‑Co (cobalt high‑speed steel) and a Form B design provides a balance of hardness and toughness that extends tool life under continuous production loads. For shops working with medium‑strength steels and temper cast iron, this material choice reduces premature wear and maintains thread quality over longer runs. The flank‑ground geometry refines the cutting edge, lowering friction and producing a cleaner thread profile, which in turn reduces rework and improves assembly fit. Consistent chip control and machining stability The straight flutes and optimised geometry of this tap promote reliable chip evacuation during through‑hole tapping, minimising the risk of chip congestion and breakage. Stable chip flow leads to fewer interrupted cycles and less downtime, which is particularly valuable on automated tapping stations or CNC rigs. The 11 mm shank diameter provides robust clamping in standard tool holders, contributing to concentricity and reduced vibration for more precise, repeatable threads. Standards‑compliant threads for seamless integration Designed to cut Whitworth parallel pipe threads conforming to ISO 228, the tool produces G 1/4" threads with 19 tpi, aligning with widely used fittings and components. Compliance with DIN 5156B and ISO standards simplifies quality assurance and documentation in regulated production environments. The tap’s suitability for through threads means it integrates readily into existing machining processes without additional special fixturing, helping to streamline setup and maintain production throughput. For ISO‑compliant, long‑running pipe threading from TECWERK, contact Metav Werkzeuge GmbH in Emmerich for fast supply and expert advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — Metav’s consultants will advise on tool integration and delivery from stock. Technical data Article number: 2000867501NW Brand: TECWERK Packaging unit: 1 UID: 2000867501NW Facts Shank diameter: 11 mm Thread form: G 1/4" — 19 tpi Material suitability: steels up to approx. 1000 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Form B design, straight fluted Flank‑ground cutting edges Whitworth parallel pipe thread G to ISO 228 For through‑hole tapping, suitable for temper cast iron FAQ What thread standard does this tap produce? The tap produces Whitworth parallel pipe threads to ISO 228, specifically G 1/4" with 19 tpi, as specified for the TECWERK machine pipe tap (DIN 5156B). Which materials is the tap suitable for? The TECWERK tap is suitable for through‑hole threading in steels up to approximately 1000 N/mm² and in temper cast iron, matching the tool’s HSS‑Co construction and geometry. What is the tool material and how does it affect performance? Made from HSS‑Co (cobalt high‑speed steel), the tap offers enhanced heat resistance and wear life compared with standard high‑speed steels, supporting longer production runs with consistent thread quality. What shank size should the machine holder accommodate? The tap has an 11 mm shank diameter, suitable for standard holders that accept this dimension to ensure stable clamping and concentricity during machining. Is the tap intended for blind or through threads? This tool is specified for through‑hole threading, which supports reliable chip evacuation and reduces the risk of chip blockage in continuous operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high-performance HSS‑Co material, a Form C cutting geometry and a nitride plus vapour-treated surface for reliable threading in difficult-to-machine alloys; order the tool directly via Metav Werkzeuge or consult our specialists for application support. TECWERK machine tap G 1/4" BSPP, HSS‑Co, Form C The TECWERK machine tap G 1/4" is a precision pipe-thread tap for blind holes, designed for demanding stainless and heat-resistant steels High-performance HSS‑Co construction Suitable for blind hole threading Conforms to DIN ISO 228 BSPP standard Nitride and vapour-treated surface Reliable performance in high-strength and stainless materials The combination of HSS‑Co (cobalt high-speed steel) and Form C geometry ensures elevated wear resistance and toughness when machining alloys with high tensile strength. Built for hard-to-machine steels, the tool sustains cutting forces encountered in stainless, acid- and heat-resistant steels exceeding 850 N/mm². This translates into fewer tap breakages and more consistent thread quality in series production, reducing downtime and improving process stability. The design focuses on efficiency and repeatability rather than occasional hobby use. Precision threading to recognised standards for consistent assembly Engineered for BSPP G 1/4" (Whitworth pipe thread) in accordance with DIN ISO 228, the profile and pitch deliver threads that mate reliably with standard fittings. The specification of 19 tpi (threads per inch) provides the correct pitch for traditional pipe connections, enabling predictable sealing behaviour when combined with appropriate sealing methods. Using a standard-compliant tap simplifies quality control and supports interchangeability across suppliers and assemblies. Surface treatment and geometry for better chip control and tool life The tool is nitride and vapour-treated, offering a vaporised finish that improves surface hardness and reduces friction at the cutting edges. The right-hand helix 40° and flank relief reduce cutting forces and promote chip formation suitable for blind holes, helping to avoid chip packing at the bottom of the hole. These features together extend service life and reduce the frequency of tool changes, which supports leaner machining processes and lower overall tooling costs. Designed for machine operation and straightforward integration With a shaft Ø 11 mm the tap fits common collets and holders used in machining centres and tapping heads, allowing immediate integration into established production setups. The geometry is optimised for machine tapping in confined situations such as blind holes, where controlled chip evacuation and consistent torque behaviour are essential. Supplied as a single unit, the component is ready for insertion into production workflows and for use in repeatable, traceable operations. For specialised advice on using the TECWERK machine tap in demanding stainless or heat-resistant steels, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and supply options. Technical data Article number: 2000867567NW Product designation: TECWERK machine tap G 1/4" BSPP HSS‑Co Manufacturer: TECWERK Facts Shaft diameter: 11 mm Threads per inch: 19 tpi Packaging unit: 1 piece Special features Material: HSS‑Co (cobalt high-speed steel) Type: Form C, VA Surface: nitride and vapour-treated (vaporised finish) Identification: blue ring Geometry: right-hand helix 40°, flanks relieved Thread: BSPP (Whitworth pipe thread) G 1/4" to DIN ISO 228 Application: blind hole threading Suitable for: stainless, acid- and heat-resistant steels > 850 N/mm² FAQ What materials is this tap designed for? The TECWERK machine tap (SKU 2000867567NW) is designed for hard-to-machine materials, notably stainless and heat-resistant steels with tensile strengths above 850 N/mm². Can this tap be used for through holes as well as blind holes? The geometry and chip control are optimised for blind hole threading, though it will cut through holes; care is needed with chip evacuation when used for through threading. Which thread standard does the tap follow? The tap produces a BSPP (Whitworth) G 1/4" thread in compliance with DIN ISO 228, providing compatibility with standard pipe fittings. What benefits does the nitride and vapour-treated surface provide? The nitride and vapour-treated finish increases surface hardness and reduces friction, improving wear resistance and extending tool life under demanding conditions. What machine interface does the tap require? The tool has a shaft Ø 11 mm, compatible with common collets and tapping heads found in machining centres; adapt the holder as per machine manufacturer recommendations. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the durable HSS‑Co construction and the optimised right‑hand spiral geometry for reliable pipe threading in blind bores; order the TECWERK machine tap directly via Metav Werkzeuge or contact our specialists for application advice. TECWERK machine tap DIN 5156C, G 1/4" x 19, HSS‑Co The TECWERK machine tap G 1/4" is a high‑performance Whitworth pipe thread tap for machine threading to ISO 228, designed for blind‑hole applications. HSS‑Co high‑cobalt construction Right‑hand spiral 40° for blind bores Whitworth pipe thread G to ISO 228 Shank Ø 11 mm for standard collet fit Consistent pipe threads for pressured systems The TECWERK machine tap DIN 5156C G 1/4" x 19 combines a high‑cobalt HSS‑Co substrate with precise Form C geometry to deliver consistent Whitworth pipe threads to ISO 228. This construction increases red hardness and wear resistance, resulting in extended life under the thermal and mechanical stresses typical of industrial threading. The result is a tapping solution that maintains dimensional accuracy over longer production runs, supporting repeatable assembly and sealing performance in pipework and hydraulic components. Geometry engineered for blind‑hole efficiency The tap's right‑hand spiral at 40° and flank relief actively evacuate chips from blind holes, reducing the risk of chip jam and breakage. For machining operations where chip control is critical, this geometry shortens cycle times and lowers scrap rates by maintaining uninterrupted cutting action. The spiral design also promotes smoother entry and exit, which helps achieve reliable thread profiles in materials up to approximately 1000 N/mm² tensile strength and in malleable cast iron, translating into measurable process stability on the shop floor. Machine compatibility and handling benefits With a shaft diameter of 11 mm, the tool fits common collets and tool holders, easing integration into existing tapping stations and CNC setups. Conforming to DIN 5156C, the tap is suitable for automated and manual machine tapping where defined thread quality is required. The combination of HSS‑Co material and relieved flanks supports occasional regrinding and tool reconditioning, making the tool an economical choice across small batches and larger production runs while preserving thread integrity. Practical advantages and quality assurance The tap is specified for Whitworth pipe thread G in the 1/4" size with 19 threads per inch, providing compatibility with standard fittings and components. Its design for blind‑hole applications addresses a common production challenge, offering improved chip removal and reduced tool stress. For operators seeking predictable performance and fewer interruptions, this thread tap provides an effective balance of durability, precision, and process reliability—factors that contribute to lower overall production costs and reduced downtimes. For reliable pipe‑threading results, choose the TECWERK HSS‑Co machine tap and contact Metav Werkzeuge for order placement or specialist guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867511NW Brand: TECWERK Packaging unit: 1 Facts Shank diameter: 11 mm Thread: G 1/4" (Whitworth pipe thread) Threads per inch: 19 tpi Spiral angle: 40° Suitable material strength: up to approx. 1000 N/mm² Special features HSS‑Co Form C Right‑hand spiral 40° Flank relief (flanken hinterschliffen) Whitworth pipe thread G to DIN ISO 228 Suitable for blind‑hole threads DIN 5156C compliance FAQ What materials can this tap machine into? The TECWERK machine tap is suitable for steels with tensile strength up to approximately 1000 N/mm² and for malleable cast iron, enabling reliable pipe threads in common industrial materials. Is the tap suitable for blind‑hole threading? Yes. The right‑hand spiral at 40° and flank relief are specifically designed to evacuate chips from blind bores, improving process security for threaded blind holes. Which thread standard does the tool produce? The tool produces a Whitworth pipe thread G 1/4" to DIN ISO 228 with 19 tpi, matching standard pipe fittings and sealing systems. Can the tap be used in automated CNC tapping stations? Yes. The tap conforms to DIN 5156C and has an 11 mm shank for standard collet mounting, making it compatible with common machine tapping setups. What is the article number for ordering and identification? The article number is 2000867511NW, listed under the TECWERK HSS‑Co machine tap G 1/4" x 19 Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co construction combined with a straight‑flute, flank‑relieved geometry for consistent, long‑life pipe threads; the G 1/8" x 28 specification and shank Ø 7 mm ensure easy integration into machine tapping setups. Order directly via Metav Werkzeuge or consult our specialists for application support. Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK) — straight‑fluted, flank‑relieved for through threads Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK) is a production‑grade tap for forming parallel pipe threads to ISO 228, optimised for machine use in short‑cycle and serial tapping operations. Cobalt HSS for higher heat resistance Straight‑flute, flank‑relieved geometry ISO 228 Whitworth pipe thread G 1/8" x 28 Suitable for through threads in steel up to ~1000 N/mm² Reliable performance for serial pipe‑threading The cobalt‑alloy composition (HSS‑Co) offers improved hardness and thermal resistance compared with standard high‑speed steel, which translates into longer tool life and fewer tool changes during production. For shops running repeated or batch tapping operations, this results in reduced downtime and steadier cycle times. The tap’s specification for G 1/8" x 28 threads complies with ISO 228, so components produced with this tool match industry‑standard parallel pipe threads, simplifying part interchangeability and assembly processes. Clear guidance on material capability and application Designed for machining through threads, the tool is suitable for use in steels up to approximately 1000 N/mm² and in malleable cast iron, making it a versatile choice for general workshop and light industrial environments. The shank Ø 7 mm permits straightforward clamping in common machine tool holders; when combined with appropriate lubricants and machine feeds, the tap delivers consistent thread form. For materials beyond the stated strength range, process parameters should be reviewed before use. Geometry that stabilises chip control and thread quality The tap’s straight flutes and flank‑relieved cutting edges aid chip formation and evacuation during through tapping. This geometry reduces cutting forces and friction on the thread flanks, which helps to preserve thread profile and minimise the risk of jamming. In practice, the ground flanks contribute to a cleaner thread surface and more reliable assembly fits, particularly where thread engagement and sealing depend on accurate profile reproduction. Integration and operational considerations for production As a machine tap to DIN 5156B, the tool is intended for powered tapping processes rather than extended hand use; correct spindle speeds, feed rates and through‑coolant or lubricant selection will ensure optimal performance. The tool’s construction and geometry support high‑precision, repeatable results when used in stable fixturing and with standard tapping cycles. For end users seeking to reduce supplier complexity, obtaining the tap via Metav Werkzeuge adds the advantage of a broad supply network and inventory reliability. Contact Metav Werkzeuge today to secure TECWERK HSS‑Co machine taps for dependable G 1/8" x 28 pipe‑thread production — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000867500NW Designation: Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 7 mm Thread: G 1/8" x 28 Standard: DIN 5156B / ISO 228 SKU UID: 2000867500NW Special features Material: HSS‑Co (cobalt high‑speed steel) Form: B, straight flutes, flank‑relieved Application: through threads Suitable for: steels up to ca. 1000 N/mm², malleable cast iron FAQ What materials can be machined with the Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK)? The Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK) is rated for steels up to approximately 1000 N/mm² and for malleable cast iron, offering reliable performance across common workshop materials. Is this tap suitable for machine use only or can it be used by hand? This is a machine tap by design; the Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK) is optimised for powered tapping cycles and clamped machine spindles rather than prolonged hand tapping. What does 'Form B' and 'flank‑relieved' mean for threading results? Form B indicates a straight‑flute machine tap with ground detail; the flank‑relieved cutting edges on the Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK) reduce friction and improve chip formation, helping to maintain thread accuracy. Which thread standard does this tap produce and what is it used for? The tap produces the parallel pipe thread defined by ISO 228 (Whitworth pipe thread, G 1/8" x 28), commonly used where thread interchangeability is required for fittings that seal with a gasket or sealing face rather than on the threads. What shank size and mounting options does the tap have? The Machine tap DIN 5156B G 1/8" x 28 HSS‑Co ISO 228 (TECWERK) has a shank diameter of 7 mm and is intended for standard machine tool holders that accept this nominal shank size. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from robust HSS‑Co construction and a nitride with vapourised finish that extend tool life when tapping hard‑to‑machine, corrosion‑resistant steels; precise Whitworth pipe thread geometry ensures reliable sealing in blind‑hole applications. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Machine tap DIN 5156C VA – Whitworth G 1/8" x 28, HSS‑Co (TECWERK) The Machine tap DIN 5156C VA G 1/8" x 28 HSS‑Co is a nitride and vapour‑finished tap for producing Whitworth pipe threads in blind holes, engineered for stainless and heat‑resistant steels in industrial workshops. HSS‑Co; nitride and vapourised finish Whitworth pipe thread G 1/8" x 28 For blind holes in hard‑to‑machine steels 7 mm shank with 40° right‑hand spiral Consistent threads in demanding materials This tap delivers repeatable, leak‑tight Whitworth pipe threads even in materials that challenge conventional tools. Made from HSS‑Co, the tool combines toughness with hot‑hardness, allowing steady cutting in stainless, acid‑ and heat‑resistant steels with tensile strengths above 850 N/mm². The Form C geometry and undercut flanks reduce cutting forces and chip congestion, which helps maintain thread form and increases the uptime of machining cycles. This yields predictable results and supports efficient production planning. Surface treatment and geometry that extend service life A nitrided and vapourised surface finish improves wear resistance and reduces friction during engagement, while the visible blue ring aids fast identification in tool sets. The 40° right‑hand spiral promotes reliable chip evacuation in blind‑hole tapping and reduces the risk of chip packing at the thread root. Together these features lower tool wear and reduce the frequency of tool changes, which can make a measurable difference to throughput in repetitive operations. Purpose‑built for pipe threads and blind‑hole applications Engineered specifically for Whitworth pipe threads (G) in accordance with DIN ISO 228, the cutter produces the required thread form for sealing applications. The design is optimised for blind holes, with flute geometry and chip control that minimise the likelihood of chip jamming. For workshops producing fittings or components that require sealed joints, the result is robust, serviceable threads that meet industrial tightening and sealing demands without excessive rework. Machine compatibility and handling advantages A 7 mm shank provides straightforward mounting in common tapping holders and machines, while the tool’s overall form factor supports automated and manual tapping operations. Markings and the vapourised finish make inventory handling and tool selection simple in busy environments. The combination of high‑performance substrate, advanced surface treatment and tailored geometry offers a balance of precision and longevity, reducing downtime and improving the cost‑efficiency of thread production. Contact Metav Werkzeuge for procurement and technical guidance on TECWERK tapping solutions; secure supply direct from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867566NW SKU: 2000867566NW Brand: TECWERK Packaging unit: 1 Facts Shank diameter: 7 mm Thread form: Whitworth pipe thread G 1/8" x 28 (28 TPI) Standard: DIN ISO 228 Special features Material: HSS‑Co Form: DIN 5156C (Form C) Type: VA (stainless variant) Coating/finish: nitrided and vapourised Marking: blue ring Spiral: 40° right‑hand spiral Flank: undercut flanks Application: blind‑hole threads Suitable for: hard‑to‑machine, stainless, acid‑ and heat‑resistant steels > 850 N/mm² Surface quality: vapourised FAQ What materials can be machined with this tap? This TECWERK machine tap is designed for hard‑to‑machine materials, specifically stainless, acid‑ and heat‑resistant steels with tensile strengths above 850 N/mm². Is the tap suitable for blind‑hole pipe threads? Yes, the tap is optimised for blind‑hole Whitworth pipe threads (G) and features flute and spiral geometry intended to reduce chip packing during blind‑hole tapping. Which standard does the thread conform to? Threads produced with this tap conform to DIN ISO 228 for Whitworth pipe threads (G), ensuring compatibility with standard pipe fittings. How is the tool surface treated to improve performance? The tool has a nitrided and vapourised finish that increases wear resistance and reduces friction, contributing to longer tool life and more consistent thread quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a cobalt-alloyed HSS construction and a 40° right-hand spiral for reliable thread form and efficient chip evacuation; the combination of robust material choice and precise geometry ensures consistent results in blind-hole thread production. Order the machine tap directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap DIN 5156C G 1/8"×28 HSS‑Co ISO 228 – TECWERK (cobalt HSS, Whitworth G thread) The Machine tap DIN 5156C G 1/8"×28 HSS‑Co ISO 228 – TECWERK is a purpose-built machine tap for cutting Whitworth pipe threads G in blind holes, designed for use in medium‑strength steels and temper cast iron. Cobalt-alloyed HSS for high wear resistance Right-hand 40° spiral for efficient chip removal Whitworth pipe thread G 1/8" × 28 to DIN ISO 228 Consistent thread performance through precise material and form Constructed from HSS‑Co, this tool maintains hardness and edge stability at elevated cutting temperatures, which is vital when producing repeated or serial threads. The Form C geometry with flank relief reduces cutting forces and lowers the risk of thread distortion, while the optimised 40° spiral promotes reliable chip control in blind-hole applications. These engineered features translate into fewer tool changes and more predictable process windows on lathes and tapping heads. Productivity and suitability for common workshop materials Engineered for blind holes, the tap is suitable for use in steels with tensile strength up to ≈1000 N/mm² and in temper cast iron, offering a practical balance between durability and economy. The Whitworth pipe thread G profile conforms to DIN ISO 228, ensuring compatibility with standard pipe fittings and assemblies. A 7 mm shank provides secure gripping in holders and collets, and the 28 tpi thread form establishes the fine pitch required for G 1/8" connections commonly found in fluid and pneumatic components. Practical advantages on the shop floor The tap’s construction delivers reduced rework rates and improved first-pass yields thanks to stable geometry and enhanced wear resistance. For process engineers and workshop managers, the measurable benefits are shorter cycle times and predictable maintenance intervals. Where chip evacuation is critical, the spiral design combined with flank relief minimises clogging in blind threads, supporting a safer and more efficient threading operation. The tool’s specification enables straightforward integration into existing machining routines while keeping compliance with recognised standards. For reliable supply and technical advice on the TECWERK G 1/8"×28 machine tap, contact Metav Werkzeuge in Emmerich—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com; Metav’s specialists will recommend the best setup for specific machine and material combinations Technical data Article number: 2000867510NW Label: Machine tap DIN 5156C G 1/8"×28 HSS‑Co ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867510NW Facts Shank diameter: 7 mm Spiral angle: 40° Threads per inch: 28 tpi Suitable for steels up to: ≈1000 N/mm² Special features Material: HSS‑Co (cobalt-alloyed high-speed steel) Form C geometry Right-hand spiral Flank relief on thread flanks Whitworth pipe thread G to DIN ISO 228 Intended for blind-hole threading FAQ What materials can be machined with this tap? The machine tap is rated for use in medium-strength steels (up to ≈1000 N/mm²) and temper cast iron; the TECWERK HSS‑Co composition supports elevated cutting temperatures typical of such applications. Is this tap suitable for through holes as well as blind holes? While primarily designed for blind-hole threading, the TECWERK G 1/8"×28 machine tap can be used in through-hole operations where the thread form and pitch match process requirements. Which standard does the thread form comply with? The tap produces Whitworth pipe thread G profiles in accordance with DIN ISO 228, ensuring compatibility with standard fittings and components. What is the shank size and how should it be held? The tool features a 7 mm shank, suitable for secure clamping in precision holders or collets used in machining centres and tapping heads. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a HSS‑Co construction and a nitrided, vapourised surface for durable performance when cutting Whitworth pipe threads; order the tap directly via Metav Werkzeuge or consult the Metav team for application guidance. Machine tap DIN 5156B VA – G 1/8" x 28, HSS‑Co, TECWERK The Machine tap DIN 5156B VA – G 1/8" x 28 HSS‑Co is a straight‑fluted production tap for cutting Whitworth pipe threads to DIN ISO 228 in through‑thread applications, especially for demanding, corrosion‑resistant materials. HSS‑Co high‑speed cobalt for hard materials Nitrided and vapourised surface finish Whitworth pipe thread G 1/8" x 28 to ISO 228 Straight flute with chamfered flanks High‑performance cutting for demanding materials Manufactured from HSS‑Co, this production tap delivers increased red‑hardness and wear resistance compared with standard high‑speed steels, which translates into longer tool life when machining tough alloys. The combination of Form B Type VA geometry and a nitrided plus vapourised surface improves resistance to adhesive wear and reduces the risk of galling on stainless and acid‑resistant steels with tensile strengths above 850 N/mm². For production environments where tool longevity and process stability matter, this geometry offers a balance of cutting edge strength and controlled chip formation. Accurate Whitworth pipe threads according to ISO 228 The tool cuts Whitworth pipe thread G 1/8" x 28 in compliance with DIN ISO 228, making it suitable for parallel pipe connections and through‑thread installations. The thread form is produced with a straight‑flute tap designed for stable engagement and predictable dimensional results. For assembly work that requires standardised sealing solutions, the consistent thread geometry ensures reliable mating with corresponding pipe fittings and reduces rework associated with misformed threads. Surface treatment and flute design for smoother machining A nitrided and vapourised finish provides enhanced surface hardness and a reduced coefficient of friction, which helps chips evacuate more easily and lowers tapping torque. The straight flutes and ground flanks promote regular chip breaking and make the tool more tolerant of intermittent chip evacuation typical in through‑hole tapping. The blue ring marking assists identification in busy tooling racks, while the improved surface finish supports coolant wetting and heat management during high‑rate machining. Machine compatibility and handling benefits Equipped with a 7 mm shank, the tap is configured for secure clamping in standard machine tool holders and quick‑change tapping systems. Intended for through‑thread applications, the tool is suitable for series production on lathes and machining centres that accept straight‑flute machine taps. For processes involving hard, corrosion‑resistant steels, the design reduces the frequency of tool changes and supports higher overall equipment effectiveness. For specific cycle parameters or material‑dependent advice, Metav Werkzeuge can provide technical guidance and procurement support. Choose the TECWERK HSS‑Co machine tap through Metav Werkzeuge for dependable thread quality and consistent supply from Emmerich—contact Metav Werkzeuge for tailored advice and prompt fulfilment Technical data Article number: 2000867493NW Manufacturer: TECWERK Description: Machine tap DIN 5156B VA G 1/8" x 28 HSS‑Co vapourised TECWERK Packaging unit: 1 Facts Shank diameter: 7 mm Thread: G 1/8" x 28 Suitable for materials > 850 N/mm² tensile strength For through‑thread applications Special features Material: HSS‑Co Form B, Type VA Nitrided and vapourised surface finish Blue ring identification Straight flutes, flanks ground Whitworth pipe thread to DIN ISO 228 For hard‑to‑machine, corrosion‑resistant steels FAQ Is this tap suitable for stainless and acid‑resistant steels? Yes. The TECWERK Machine tap DIN 5156B VA is designed for hard‑to‑machine, corrosion‑resistant steels and is specified for materials with tensile strengths above 850 N/mm². Which thread standard and size does the tap produce? The tool cuts a Whitworth pipe thread G 1/8" x 28 in accordance with DIN ISO 228, suitable for parallel pipe connections and through‑thread use. Can the tap be used in automatic tapping heads and machining centres? Yes. The straight‑flute, machine‑grade design and 7 mm shank make the tap compatible with standard machine tool holders and production tapping systems for through‑hole threading. What surface treatment does the tap have to improve wear resistance? The TECWERK tap features a nitrided and vapourised surface finish, enhancing surface hardness and helping to reduce adhesive wear during machining. Is the tap intended for through threads or blind holes? The specification indicates the tool is for through‑thread applications, optimised for chip evacuation and stable cutting in passages. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co material and a vapour‑finished, nitrided surface for reliable pipe-thread production in demanding materials; order the TECWERK machine tap via Metav Werkzeuge or consult the team for tailored machining advice. Machine thread tap DIN 5156C VA G 3/4 in x 14 HSS‑Co vapour‑finished (ISO 228) — TECWERK The Machine thread tap DIN 5156C VA G 3/4 in x 14 HSS‑Co is engineered to cut Whitworth pipe (G) threads in blind holes and to perform reliably on stainless and heat‑resistant steels HSS‑Co alloy for high wear resistance Designed for blind holes (BSPP G threads) Vapour‑finished and nitrided for long life 40° right‑hand spiral with ground flanks Consistent threads in hard‑to‑machine alloys Manufactured from HSS‑Co, this machine tap delivers dependable cutting performance where ordinary high‑speed tools struggle. The tool is specified for pipe threads to DIN ISO 228, producing Whitworth (G) form threads at G 3/4 in x 14 tpi, which are common in hydraulic and fluid‑transfer assemblies. The combination of a cobalt‑enriched high‑speed steel and an optimised geometry reduces flank wear and helps maintain thread accuracy over extended batch runs. For operations that require repeatable results in stainless, acid‑ and heat‑resistant steels and other difficult‑to‑cut materials, the physical composition of the tool provides measurable gains in process stability and reduces scrap rates. Surface engineering and flute geometry for extended uptime A nitrided core and vapour‑finished surface treatment enhance resistance to abrasion and adhesive wear; the vapour finish also improves chip evacuation and reduces built‑up edge formation. The tool’s 40° right‑hand spiral flutes promote axial chip removal, which is particularly beneficial when producing threads in blind holes, and the ground flanks ensure precise thread form and easier thread engagement. These engineered features translate into fewer tool changes, longer intervals between regrinds and improved cycle‑time consistency on CNC and automatic tapping heads. Secure clamping and process reliability A substantial 20 mm shank diameter provides robust clamping and minimises vibration, which supports accurate thread lead and surface quality. The tap’s design for blind‑hole tapping helps prevent premature chip packing when the bore depth approaches the minor diameter; combined with the spiral flute angle and surface treatment, this leads to fewer tap breakages and less operator intervention. Where component integrity and leak‑tight joints are a priority, using a purpose‑designed machine tap like this reduces the need for subsequent corrective machining or additional inspection cycles. Procurement confidence and workshop support from Metav Sourcing this TECWERK tap through Metav Werkzeuge gives access to a broad range of precision tools and a supply chain geared to workshop continuity. Metav’s European hub functions as a quality filter, combining a wide assortment of products with rapid, transparent order processing from Emmerich. That reliability supports planning for maintenance windows and production schedules, so delivery and spare‑part availability become part of the machining strategy rather than a risk factor. For professional procurement of the TECWERK machine thread tap and application guidance, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machining parameters, delivery options and part availability. Technical data Article number: 2000867571NW Brand: TECWERK Packaging unit: 1 Facts Thread form: G 3/4 in x 14 tpi (Whitworth, per DIN ISO 228) Shank diameter: 20 mm Spiral angle: 40° right‑hand Special features Material: HSS‑Co (cobalt high‑speed steel) Form: C, Type VA Surface: nitrided and vapour‑finished Flutes: right‑hand spiral, flanks ground Application: blind‑hole tapping Suitable for: stainless, acid‑ and heat‑resistant steels and other hard‑to‑machine materials (> 850 N/mm² tensile strength) Surface quality designation: vapour‑finished Colour marker: blue ring FAQ What thread standard does this tap produce? This tap produces Whitworth pipe threads (G) in accordance with DIN ISO 228, specified here as G 3/4 in x 14 tpi for the TECWERK machine tap. Is the tool suitable for stainless and heat‑resistant steels? Yes, the HSS‑Co composition and surface treatment make the tool suitable for hard‑to‑machine materials such as stainless and heat‑resistant steels with tensile strengths above 850 N/mm². Can this tap be used for blind holes? The tool is designed specifically for blind‑hole tapping; the 40° spiral flutes and vapour‑finished surface aid chip evacuation in restricted depths. What are the benefits of the nitrided and vapour‑finished surface? Nitriding increases surface hardness and wear resistance, while the vapour‑finished treatment improves chip flow and reduces adhesive wear, extending tool life for the TECWERK tap. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a combination of high-temperature performance and precise thread form: the HSS‑Co construction and ground flanks ensure consistent results when producing Whitworth pipe threads in demanding materials. Order the tool directly via Metav Werkzeuge or consult their specialists for application guidance. Machine tap DIN 5156C G 3/8" x 19, HSS‑Co (TECWERK) — right‑hand spiral, form C The machine tap DIN 5156C G 3/8" x 19, HSS‑Co (TECWERK) is a purpose‑built tap for Whitworth pipe threads to ISO 228, optimised for blind‑hole threading and medium‑high strength steels. HSS‑Co construction for higher heat resistance Right‑hand spiral 40° for efficient chip evacuation Ground flanks for precise thread geometry Shank Ø 12 mm, Whitworth G 3/8" x 19 tpi Consistent performance from a high‑temperature alloy Made from HSS‑Co, the tool offers improved hot hardness compared with conventional high‑speed steels, enabling stable performance at raised cutting temperatures. The cobalt‑alloy composition increases tool life under thermal load and reduces wear in repetitive production runs. For workshops and production sites seeking reliable cutting endurance, this material choice translates into fewer tool changes and more predictable maintenance cycles. Accurate threads in blind holes with controlled chip flow The right‑hand spiral 40° geometry directs chips back into the flutes, which is especially beneficial when cutting blind holes where chip evacuation is critical. Combined with ground flanks, the geometry produces a clean flank form and consistent thread profile, reducing the need for rework. These design choices support repeatable results on each workpiece and help maintain thread integrity in through‑hard operations. Suitable for pipe threads and common engineering materials Designed for Whitworth pipe thread form G to ISO 228, the tap produces G 3/8" x 19 tpi threads and is intended for applications in steels with strength up to approx. 1000 N/mm² as well as in temper cast iron. The parallel pipe thread form complies with ISO 228 requirements, which means components will assemble correctly where standard pipe fittings are used. This makes the tool appropriate for hydraulic, pneumatic and general mechanical engineering tasks that call for standardised G‑threads. Workshop compatibility and efficient set‑up A 12 mm shank ensures compatibility with standard machine collets and holders, permitting quick mounting on CNC tapping spindles or dedicated tapping heads. The tap’s form C classification and robust geometry support machine tapping at stable speeds, helping to streamline production processes. With a clear specification and widely used interface dimensions, integration into existing toolsets is straightforward, reducing set‑up time and simplifying inventory management. Discuss application requirements with Metav Werkzeuge to confirm suitability for specific materials and machines and to obtain further technical advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867512NW Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 12 mm Thread: G 3/8" x 19 tpi Material strength capability: up to approx. 1000 N/mm² Special features Material: HSS‑Co Form C, right‑hand spiral 40° Flanks ground Whitworth pipe thread G to DIN ISO 228 For blind‑hole threads, suitable for steels and temper cast iron FAQ What thread standard does the tap produce? The tool produces Whitworth pipe threads G to ISO 228, specified as G 3/8" x 19 tpi for item 2000867512NW. Which materials can be machined with this tap? The tap is specified for steels up to approximately 1000 N/mm² and for temper cast iron, as stated in the product information. Is this geometry suitable for blind‑hole threading? Yes — the right‑hand spiral 40° and flanks ground geometry are optimised for blind‑hole threading to aid chip evacuation and thread quality. What is the shank size and how is it mounted? The shank diameter is 12 mm, compatible with standard machine collets and holders for machine tapping spindles. What are the key material and form characteristics of the tool? Constructed from HSS‑Co in form C, the tap combines cobalt‑enhanced hot hardness with a spiral flute and ground flanks for precise thread generation. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust HSS‑Co construction and vapourised surface for extended tool life, combined with a 40° right‑hand spiral and relieved flanks to ensure reliable chip control in blind holes; order this specialised tap via Metav Werkzeuge or consult our specialists for application advice. Machine tapping tool DIN 5156C VA – G 3/8" x 19, HSS‑Co, TECWERK A machine tap DIN 5156C VA G 3/8" x 19 engineered for producing Whitworth pipe threads in blind holes and for machining hard‑to‑cut stainless, acid‑ and heat‑resistant steels HSS‑Co with vapourised surface Right‑hand spiral 40° for chip control Suited for blind holes in tough steels 12 mm shank for secure machine mounting Built for hard‑to‑machine materials and reliable thread form The HSS‑Co composition and Form C (Type VA) geometry deliver the thermal stability and wear resistance needed when working with high‑strength alloys. Designed specifically for Whitworth pipe thread G production, the tool copes with materials exhibiting tensile strength above 850 N/mm², including stainless and heat‑resistant steels. The combination of cobalt‑alloyed high‑speed steel and vapourised surface treatment improves hot hardness and reduces flank wear, which translates into fewer tool changes and more consistent production runs in industrial environments. Precision cutting geometry that improves process efficiency A right‑hand spiral 40° and flanks relieved design promote controlled chip formation and evacuation, especially important for blind holes, where chips can cause premature tool breakage. The vapourised surface and nitriding enhance sliding properties and corrosion resistance, while the blue ring marking simplifies rapid identification in mixed tool sets. A 12 mm shank ensures secure clamping and accurate concentricity in automated tapping heads, supporting repeatable cycle times and reducing rework rates on critical components. Conforms to recognised standards and simplifies integration Manufactured to DIN 5156C and compatible with DIN ISO 228 pipe‑thread specifications, this tap produces the established G 3/8" x 19 tpi Whitworth pipe thread used widely in fluid and pressure systems. The tool is intended for machine tapping operations and is optimised for blind‑hole applications. Compatibility with standard collets and holders makes it straightforward to integrate into existing machining cells, helping to maintain production continuity and reduce setup complexity. Contact Metav Werkzeuge for tailored application support on TECWERK HSS‑Co taps and to discuss delivery from our Emmerich quality centre — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 2000867568NW Label: Maschinengewindebohrer DIN 5156C VA G 3/8 Zollx19 HSS‑Co vapor.ISO 228 TECWERK Brand: TECWERK Packaging unit: 1 Facts Shank diameter: 12 mm Thread: G 3/8" x 19 tpi Right‑hand spiral angle: 40° Material: HSS‑Co Special features Form C · Type VA Nitrided and vapourised surface finish Blue ring identification Flanks relieved for reduced friction Whitworth pipe thread G per DIN ISO 228 For blind holes Intended for hard‑to‑machine materials (stainless, acid‑ and heat‑resistant steels > 850 N/mm²) FAQ What materials is this tap suitable for? The tap is designed for hard‑to‑machine materials; the TECWERK machine tap (DIN 5156C VA, SKU 2000867568NW) is suitable for stainless, acid‑ and heat‑resistant steels with tensile strengths above 850 N/mm². Is this tool suitable for blind‑hole tapping? Yes. The tool geometry, including the right‑hand spiral and relieved flanks, is optimised for blind holes to promote chip evacuation and reduce breakage risk during tapping. Which thread standard does the tap produce? The tool produces Whitworth pipe thread G according to DIN ISO 228, specifically G 3/8" x 19 tpi, meeting common industrial specifications for pipe fittings. How does the vapourised surface treatment help in production? The vapourised treatment improves surface hardness and sliding properties, extending tool life and lowering the frequency of replacements in continuous manufacturing environments. What clamping size is required for this tap? A 12 mm shank requires compatible collets or holders; the robust shank diameter aids concentricity and secure mounting in machine tapping units. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Secure reliable pipe-threading in hard-to-machine steels by combining durable HSS‑Co construction with a nitrided, vapour‑deposited surface and a 40° spiral design; order the tap directly via Metav Werkzeuge or consult the technical team for tailored application advice. Maschinengewindebohrer DIN 5156C VA G 5/8 Zollx14 HSS-Co vapor.ISO 228 TECWERK — machine tap with HSS‑Co and vapour finish Maschinengewindebohrer DIN 5156C VA G 5/8 Zollx14 HSS-Co vapor.ISO 228 TECWERK is a production‑grade machine tap intended for Whitworth (G) pipe threads to DIN ISO 228 in blind holes, engineered for difficult‑to‑machine steels and high process reliability. HSS‑Co for increased heat and wear resistance Nitrided, vapour‑deposited surface finish Right‑hand 40° spiral with relief‑ground flanks Whitworth pipe thread G to DIN ISO 228, blind holes Precision thread quality for demanding materials The tap is engineered from HSS‑Co, a cobalt‑alloyed high‑speed steel that sustains hardness at elevated cutting temperatures and extends tool life when machining stainless and heat‑resistant alloys. Combined with a nitrided and vapour‑deposited surface, the tool delivers improved sliding properties and oxidation resistance; this reduces wear and helps maintain consistent thread geometry when working in materials with tensile strength above 850 N/mm². The result is fewer rejects and predictable assembly performance. Controlled chip flow and reliable blind‑hole performance A right‑hand 40° spiral geometry actively manages chip formation in blind holes, drawing chips into the flute to avoid jamming and thread damage. The relief‑ground flanks lower friction on the cutting edges, which supports smoother entry and exit from the workpiece and a superior surface finish on the thread flanks. For production environments where downtime is costly, this combination lowers the risk of tap breakage and reduces the need for rework. Machine‑friendly dimensions and standards compliance Constructed to DIN 5156C (Form C) standards, the tool integrates seamlessly into automated tapping cycles and machine holders thanks to its common 18 mm shank diameter. The tap produces Whitworth (G) pipe threads to DIN ISO 228, ensuring compatibility with established fittings and gauges. Its standardised form and robust shank simplify tool changes and make it suitable for repeated, high‑volume applications on CNC tapping units. Practical usage notes to protect tool life When machining high‑strength stainless or heat‑resistant steels, moderate cutting speeds, adequate lubrication and controlled feed motions are essential to exploit the tool’s properties fully. The vapour‑deposited surface improves lubricant adherence, while the cobalt alloy resists tempering softening. For blind holes, use tapping cycles that allow chip clearance between passes and inspect the thread form after first parts to confirm cutting conditions; this protects process stability and capitalises on the tap’s design advantages. For precision pipe‑threading with TECWERK reliability, contact Metav Werkzeuge for technical advice or to place an order: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 2000867570NW Manufacturer: TECWERK Designation: Machine tap DIN 5156C G 5/8" x 14 HSS‑Co TECWERK Packaging unit: 1 Facts Shank diameter: 18 mm Thread: G 5/8" x 14 tpi Spiral angle: 40° Tensile strength capability: > 850 N/mm² Special features HSS‑Co material Form C, Type VA Nitrided and vapour‑deposited surface Blue ring marking Relief‑ground flanks Whitworth (G) pipe thread to DIN ISO 228 For blind holes Suitable for hard‑to‑machine materials such as stainless and heat‑resistant steels FAQ What material is recommended for use with this machine tap? The TECWERK machine tap is intended for hard‑to‑machine materials; it is suitable for stainless and heat‑resistant steels with tensile strength greater than 850 N/mm². Can this tap be used in blind holes? Yes, the tool is specifically configured for blind‑hole threading thanks to its right‑hand 40° spiral and relief‑ground flanks, which aid chip control and thread quality. Which thread standard and size does the tap produce? The tap cuts Whitworth (G) pipe threads to DIN ISO 228 in size G 5/8" with 14 tpi. What shank diameter is required for machine holders? The tap is supplied with an 18 mm shank, suitable for standard machine tap holders and quick‑change adapters. How does the surface treatment affect performance? The combination of nitriding and a vapour‑deposited finish reduces friction and improves wear resistance, extending tool life in demanding production conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Thanks to its combination of HSS‑Co construction, nitride and vapourised surface treatment, and straight‑flute geometry with relieved flanks, this tap delivers reliable thread form and extended tool life when working with hard‑to‑machine alloys. Order the machine tap directly via Metav Werkzeuge or consult the Metav team for specification support. Machine tap DIN 5156B VA, G 5/8" × 14 tpi – HSS‑Co, vapourised finish (TECWERK) The Machine tap DIN 5156B VA, G 5/8" × 14 tpi is a specialised tool for producing Whitworth pipe threads in through holes according to ISO 228, designed for demanding materials and industrial production. HSS‑Co construction for high wear resistance Nitride and vapourised surface for longer life Straight flutes with relieved flanks for chip control Whitworth G 5/8" × 14 tpi for sealed pipe threads Durable cutting performance for demanding alloys The tap is manufactured from HSS‑Co, providing a tougher microstructure that resists abrasive wear and thermal softening in interrupted or heavy cutting. The nitride and vapourised surface treatments reduce friction and improve resistance to built‑up edge, which translates into fewer tap replacements and longer uninterrupted production runs. For workshops and small series production, this combination reduces downtime and contributes to a predictable tool life in quantities where repeatability matters. Reliable Whitworth pipe threads with reduced rework Conforming to DIN ISO 228, the tool generates consistent Whitworth G thread form for sealed pipe connections, minimising subsequent fitting or reworking. The specification 14 tpi is implemented with tight dimensional control to ensure compatibility with standard fittings. Because the geometry is optimised for through threads, chips are guided away from the cutting zone, lowering the risk of thread damage and improving first‑pass yield in pipework and hydraulic component manufacture. Geometry and surface finish that improve process stability The straight flutes and relieved flanks are designed to provide controlled chip evacuation and reduced radial cutting forces, resulting in cleaner thread flanks and better surface integrity. The shank Ø 18 mm promotes rigid clamping in standard toolholders, reducing run‑out and extending the useful life of both the tap and the machine spindle. In practice, this means fewer rejects and a smoother integration into CNC production or manual tapping machines. Suited to stainless and heat‑resistant steels with predictable results This tool is specified for use on stainless steels, acid‑ and heat‑resistant alloys and other difficult‑to‑cut materials with tensile strengths above >850 N/mm² tensile strength, where ordinary high‑speed taps wear prematurely. The selected material and coatings minimise adhesive wear and maintain cutting geometry under higher temperatures. For operations that require consistent sealing threads in corrosive or high‑temperature environments, the construction and finishes of this tap offer a balance of precision and longevity. Contact Metav Werkzeuge for a technical recommendation or to request a tailored quotation for the TECWERK machine tap G 5/8" × 14 tpi; Metav Werkzeuge can advise on machining parameters, holder compatibility and delivery from Emmerich—eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 2000867497NW Product label: Maschinengewindebohrer DIN 5156B VA G 5/8 Zollx14 HSS-Co vapor.ISO 228 TECWERK Manufacturer: TECWERK Core data Thread: G 5/8" × 14 tpi (Whitworth pipe thread) Shank diameter: 18 mm For through threads Suitable for materials > 850 N/mm² tensile strength Special features HSS‑Co material Form B · Type VA Nitride and vapourised surface finish Blue ring marking Straight‑fluted geometry Relieved flanks for improved cutting Conforms to DIN ISO 228 Intended for hard‑to‑machine materials such as stainless and heat‑resistant steels FAQ What thread standard does this tap produce? The tap produces Whitworth G threads according to DIN ISO 228, supplying standardised, sealed pipe threads suitable for fittings and hydraulic connectors. Is the tool appropriate for stainless and heat‑resistant steels? Yes, the TECWERK tap in HSS‑Co with nitride and vapourised surface is specified for difficult‑to‑cut materials including stainless and heat‑resistant steels with tensile strengths above >850 N/mm², where enhanced wear resistance is required. What is the shank size and how does it affect clamping? The tool features a shank Ø 18 mm, which supports secure clamping in standard holders and reduces run‑out for improved thread precision. Is this tap suitable for through holes only? The geometry is optimised for through threads, promoting chip evacuation; it is specified for through‑hole applications to reduce the risk of chip congestion. What is the SKU for ordering and reference? The article is listed as 2000867497NW and is identified as Maschinengewindebohrer DIN 5156B VA G 5/8" × 14 tpi by TECWERK. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Der Maschinengewindebohrer DIN 371C H M10x1,5mm HSS-Co 6H TECWERK bietet langlebige Schneidleistung und präzise Toleranzführung für anspruchsvolle Fertigungsprozesse; kombinieren Sie Standzeit und Maßhaltigkeit für eine effiziente Serienproduktion und bestellen über Metav Werkzeuge oder fragen Sie die technische Beratung an. Maschinengewindebohrer DIN 371C H M10x1,5mm HSS-Co 6H TECWERK Der Maschinengewindebohrer DIN 371C H M10x1,5mm HSS-Co 6H TECWERK ist ein Form‑C Typ H Gewindewerkzeug für metrische ISO‑Gewinde, ausgelegt auf die Fertigung von Sacklochgewinden in schwer zerspanbaren Stählen. Hochlegierter HSS‑Co für hohe Standzeit Für Sacklochgewinde in harten Stählen Toleranz ISO2 (6H) für präzise Passungen Rechtsdrall 40° für kontrollierte Spanabfuhr Schaft‑Ø 10 mm, maschinenkompatibel Höhere Standzeit durch HSS‑Co für rauhere Werkstoffe Der HSS‑Co‑Werkstoff kombiniert die Zähigkeit von Schnellstahl mit Kobalt‑Legierung und sorgt so für erhöhte Standzeit und Temperaturbeständigkeit bei Bearbeitungen in hochfesten Werkstoffen. Dadurch reduziert sich der Werkzeugwechselaufwand in der Serienfertigung, was zu geringeren Stillstandszeiten und stabileren Produktionskosten führt. Anwender profitieren von planbaren Nacharbeitsraten und konstanter Gewindequalität. Präzise Gewinde für belastbare Bauteile und Passungen Das Werkzeug ist für Sacklochgewinde ausgelegt und produziert metrische Gewinde nach DIN 13 Blatt 1 mit dem Toleranzfeld ISO2 (6H). Diese Maßhaltigkeit erleichtert den Einsatz in anspruchsvollen Baugruppen und sorgt für sichere Schraubverbindungen ohne Nachbearbeitung. Die Abmessung M10x1,5 mm und der Schaft‑Ø von 10 mm erlauben einen unkomplizierten Einsatz in üblichen Maschinenaufnahmen. Geometrie und Spanverhalten für zuverlässige Fertigungsprozesse Die Kombination aus Flanken hinterschliffen und Rechtsdrall 40° verbessert das Spanverhalten und minimiert das Risiko von Gewindebeschädigungen beim Ausdrehen. Die Form‑C Typ H Ausführung mit Rotring erleichtert die optische Unterscheidung im Werkzeugmagazin. Insgesamt führt diese Geometrie zu reproduzierbaren Ergebnissen bei schwierig zu zerspanenden Stählen mit hoher Festigkeit. Für eine dauerhaft präzise Gewindefertigung empfiehlt sich der TECWERK Maschinengewindebohrer als wirtschaftliche Lösung für Werkstätten und Produktionsbetriebe – Beratung und Bestellung direkt über Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930. Produktmerkmale Artikelnummer: 2000867290NW Marke: TECWERK Bezeichnung: Maschinengewindebohrer DIN 371C H M10x1,5mm HSS‑Co 6H TECWERK Verpackungseinheit: 1 Fakten Gewinde: M10x1,5 mm Norm: DIN 371C Toleranzfeld: ISO2 (6H) Schaft‑Ø: 10 mm Besonderheiten HSS‑Co: Hochlegierter Schnellstahl mit Kobalt zur Erhöhung der Standzeit Form C, Typ H: Gewindeelementgeometrie für universelle Maschinenanwendung Rechtsdrall 40°: Unterstützt Spanabfuhr bei Sacklochgewinden Flanken hinterschliffen: Verbessert Schnittverhalten und Oberflächenqualität Rotring: Farbkennzeichnung zur schnellen Identifikation DIN 13 Blatt 1: Angaben zur Gewindeform und Toleranzklasse FAQ Wie lässt sich der Gewindebohrer in die Fertigung integrieren? Der Maschinengewindebohrer DIN 371C H M10x1,5mm HSS‑Co 6H TECWERK passt durch den Schaft‑Ø von 10 mm in gängige Maschinenaufnahmen und lässt sich ohne aufwändige Anpassung in bestehende Fertigungszellen einbinden. Für welche Werkstoffe ist das Werkzeug besonders geeignet? Das Werkzeug wurde für schwer zerspanbare Stähle mit Festigkeiten über 1000 N/mm² entwickelt und bietet dank HSS‑Co‑Legierung und optimierter Geometrie erhöhte Verschleißfestigkeit. Welche Qualitätsmerkmale sichern reproduzierbare Ergebnisse? Die Einhaltung der Norm DIN 371C, das Toleranzfeld ISO2 (6H) und die gehärteten Geometrieelemente wie Flanken hinterschliffen gewährleisten konstante Gewindequalität und reduzierte Nacharbeit. Hersteller: NORDWEST Handel AG; Robert‑Schuman‑Straße 17; 44263 Dortmund

Take advantage of a robust combination of HSS‑Co material and a specialised through‑thread chamfer for reliable tapping in demanding steels; purchase via Metav Werkzeuge or consult their advisors for technical matching and supply continuity. Machine tap DIN 371B H M10×1.5 mm – HSS‑Co machine tap, ISO metric thread, TECWERK A Machine tap DIN 371B H M10×1.5 mm engineered for through threads in high‑strength steels, suitable for use in automated tapping units and machining centres. HSS‑Co construction for high toughness DIN 371B Form B with straight flutes ISO metric M10×1.5, tolerance field 6H Shank Ø 10 mm for secure toolholding Enhanced cutting performance from cobalt high‑speed steel The use of HSS‑Co (cobalt alloy high‑speed steel) delivers a notably higher red hardness and toughness compared with standard HSS, enabling consistent cutting in demanding conditions. Coupled with the DIN 371B Form B geometry and straight flutes, this tap offers controlled chip formation and predictable load distribution. The ISO metric M10×1.5 thread and ISO2 (6H) tolerance ensure compatibility with standardised components, reducing inspection overhead and simplifying integration into production workflows. Designed for through‑thread applications and hard steels A dedicated through‑thread chamfer (Schälanschnitt) reduces the risk of chip accumulation at the thread start and shortens cycle times when producing blind or through threads on the same part. The flute design and flank relief grinding ease thread entry and minimise torque peaks, which is particularly important when working with high‑strength steels above 1000 N/mm² tensile strength. The combination of geometry and material results in longer tool life and fewer tap changes, improving process reliability and lowering overall machining cost. Secure clamping, consistent results and workshop compatibility The shank Ø 10 mm provides a compact, rigid interface for collets and holders common in tapping heads, enabling repeatable concentricity and stable spindle engagement. Marked with a red ring for quick identification and supplied as a single unit, this tap suits small batch production as well as serial manufacturing. Backed by TECWERK’s manufacturing standards and available through Metav Werkzeuge’s European distribution, the tool supports predictable supply and straightforward replacement planning for workshops and production facilities. For tailored recommendations or to confirm suitability for specific materials and machines, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange technical advice and prompt delivery. Technical Data Article number: 2000867220NW UID: 2000867220NW Label: Maschinengewindebohrer DIN 371B H M10x1,5mm HSS‑Co 6H TECWERK Core specifications Thread: M10×1.5 mm Shank Ø: 10 mm Tolerance: ISO2 (6H) Standard: DIN 371B; reference DIN 13 Blatt 1 Suitable for steels >1000 N/mm² tensile strength Design and features Material: HSS‑Co (cobalt high‑speed steel) Form B, Type H Straight flutes (geradegenutet) Flank relief ground (flanken hinterschliffen) Red ring marking (Rotring) Through‑thread chamfer (Schälanschnitt für Durchgangsgewinde) Packaging unit: 1 FAQ What materials is this tap suitable for? The Machine tap DIN 371B H M10×1.5 mm is specified for use in high‑strength steels (over 1000 N/mm²) and general engineering steels; the HSS‑Co construction increases performance in demanding alloys. Which standards and tolerances does the tap comply with? This tap conforms to DIN 371B geometry and the thread is produced to DIN 13 Blatt 1 with tolerance field ISO2 (6H) for metric threads. How does the chamfer affect machining of through threads? The specialised chamfer reduces chip build‑up at the thread start and eases thread entry, resulting in lower torque peaks and improved cycle stability for through‑thread operations. Is the shank compatible with common tapping holders? Yes; the shank Ø 10 mm is suitable for standard collets and tapping heads, enabling secure clamping and reliable concentricity in automated or manual setups. Can this tap be used in CNC tapping cycles? The geometry and material of this tap make it suitable for machine tapping cycles in machining centres and dedicated tapping units when paired with appropriate feeds and lubricants. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co hardness and ISO2 (6H) tolerance for consistently precise threads and reduced rework; order directly via Metav Werkzeuge or contact the consultants for specification advice. Machine tap DIN 371B M10 × 1.5 HSS‑Co 6H (TECWERK) — straight‑fluted, Form B, machine‑grade A Machine tap DIN 371B M10 × 1.5 HSS‑Co 6H designed for reliable metric through‑thread production in medium‑strength steels and automated machining cells HSS‑Co for improved wear resistance Form B with straight flutes ISO2 (6H) tolerance for accurate threads Shank Ø 10 mm, machine‑ready Consistent thread quality that reduces rework and downtime The combination of HSS‑Co material and the ISO2 (6H) tolerance gives a stable basis for producing repeatable metric threads to DIN 13 Part 1 standards. Cobalt‑alloyed high‑speed steel keeps the cutting edges harder at elevated temperatures, which translates into longer tool life during serial production. With tight tolerance control the likelihood of rejects and subsequent rework is reduced, improving throughput on milling machines and machining centres while maintaining component interchangeability. Efficient chip formation and through‑hole threading for machine use Designed as Form B with straight flutes and flanks ground for improved cutting action, this tap features a cutting chamfer specifically for through threads to encourage controlled chip breakage and evacuation. The machine‑ready shank Ø 10 mm allows secure clamping in rigid holders, so the cutting tool performs predictably under automated feed rates. For operations in steels up to approx. 900 N/mm² tensile strength, the geometry supports smooth penetration and stable torque behaviour, which benefits cycle time and tool change planning. Easy integration into workshop and production setups The tool follows recognised standards, so integration into existing tool lists and maintenance routines is straightforward. The thread specification M10 × 1.5 and adherence to DIN 371B mean that assembly fits remain consistent across suppliers and batches. Where process reliability matters, the combination of a defined shank, standardised tolerance class and a cutting chamfer simplifies tool management and replacement scheduling. If clarification on tolerances or compatibility is required, assistance is available to ensure correct selection before procurement. For procurement or technical advice on TECWERK machine taps, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for direct guidance and reliable supply. Technical data Article number: 2000867250NW Description: Machine tap DIN 371B M10 × 1.5 HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M10 × 1.5 Shank diameter: 10 mm Tolerance: ISO2 (6H) Material strength suitability: up to approx. 900 N/mm² Special features HSS‑Co (cobalt high‑speed steel) Form B, straight flutes Flanks ground (relieved) Metric ISO thread, DIN 13 Part 1 Cutting chamfer for through threads FAQ What materials is this tap suitable for? The machine tap is specified for use in steels up to approx. 900 N/mm² tensile strength; the TECWERK cutting geometry and HSS‑Co grade favour medium‑strength ferrous applications. Which tolerance class does the tool deliver? Threads are produced to ISO2 (6H) tolerance in accordance with the DIN 13 Part 1 specification, ensuring compatibility with standard mating parts. Is the tool ready for machine use and clamping? Yes — the tool has a shank Ø 10 mm and Form B geometry, making it suitable for secure clamping in machine tool holders. What standard and profile does the tap follow? The tap conforms to DIN 371B for machine taps and to the thread form requirements of DIN 13 Part 1, yielding standard metric threads M10 × 1.5. How does the design help with chip control? The straight‑flute Form B and the cutting chamfer for through threads promote controlled chip formation and evacuation, which supports stable cutting conditions and longer tool life. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-performance, HSS-Co PM threading solution that combines durable HARDLUBE coating with a universal straight-flute geometry for reliable production runs; order directly via Metav Werkzeuge or consult our team for application guidance. TECWERK Maschinengewindebohrer DIN 371B M10×1.5 HSS‑Co PM HARDLUBE The TECWERK Maschinengewindebohrer DIN 371B M10×1.5 HSS‑Co PM HARDLUBE is a universal machine tap designed for efficient metric thread production in a wide range of materials PM HSS with cobalt for high wear resistance HARDLUBE coating reduces friction and build‑up Straight flute, DIN 371 Form B for universal use Metric M10×1.5 ISO thread, tolerance 6HX Consistent, repeatable threads for production use The solid‑performance alloy and standardised geometry deliver predictable results in volume production. Manufactured from PM HSS‑Co, the tool maintains cutting edge hardness under load, which improves dimensional stability and reduces scrap rates. The DIN 371 design and 6HX tolerance field ensure thread form and position meet ISO expectations; this facilitates first‑pass fitment of fasteners and reduces downstream rework. For planners and production engineers, this means a measurable improvement in process capability and fewer stoppages for corrective work. Lower cutting forces and longer tool life A HARDLUBE surface finish and an optimised cutting geometry combine to reduce friction and minimise chip adhesion during threading. The straight‑flute design with an advanced edge‑rounding profile provides a balanced cutting action that reduces torque peaks and prolongs service life. As a result, cycle times remain consistent across batches and tool change frequency decreases, supporting a lower total cost of ownership. The tap’s construction is especially beneficial where heat and friction would otherwise accelerate wear on conventional high‑speed tools. Versatility across common workshop materials Specified for universal use, the threading tool performs well in steel, stainless steel, aluminium and copper alloys, and castings, making it a practical choice for mixed‑material production environments. The design includes a chamfered entry for through threads to facilitate clean engagement and minimise cross‑threading on initial contact. With a shank Ø 10 mm, a 2×D nominal flute length and right‑hand cutting orientation, the tool integrates directly into standard machine tap‑holders and automated tapping units, simplifying setup and repeatability in CNC or handheld tapping operations. For robust, high‑throughput threading choose the TECWERK HSS‑Co PM tap supplied via Metav Werkzeuge; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specification advice and ordering assistance Technical Data Article number: 2000867982NW Item description: Maschinengewindebohrer DIN 371B Univ.M10x1,5mm HSS‑Co PM HARDLUBE DIN 371 2xD TW Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M10×1.5 (metric ISO) Tolerance: 6HX Length: DIN 371 (2×D flute length) Shank diameter: Ø 10 mm Cutting direction: Right Special features Material: PM HSS‑Co (powder‑metallurgy high‑speed steel with cobalt) Coating: HARDLUBE coating Form: DIN 371 Form B (straight flute, universal) Cutting geometry: Optimised edge rounding and cutting geometry Application: Universal use in steel, stainless steel, aluminium and copper alloys, and castings Entry: Chamfered cutting edge suitable for through threads FAQ What materials can this tap machine through effectively? The TECWERK Maschinengewindebohrer DIN 371B M10×1.5 is specified for universal use and is suitable for steel, stainless steel, aluminium and copper alloys, and cast components thanks to its PM HSS‑Co composition and optimised geometry. Is the thread accuracy suitable for assembly without rework? Yes; the tool produces threads to DIN 13 sheet 1 with a 6HX tolerance field, providing ISO‑conformant thread form and allowing reliable first‑fit assembly in most production contexts. How does the HARDLUBE coating affect performance? The HARDLUBE coating lowers friction and reduces chip adhesion during cutting, which can extend tool life and help maintain consistent cycle times in continuous production. Will the shank fit standard holders and tapping units? The tap has a shank Ø 10 mm and right‑hand cutting orientation, which matches common tap‑holder interfaces and CNC tapping fixtures for straightforward integration. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co strength, TiN coating and ISO‑class accuracy for dependable thread production; order the tool directly via Metav Werkzeuge or consult their advisors for application guidance. Machine tap DIN 371B M10×1.5 HSS‑Co TiN 6H TECWERK — straight‑flute, TiN‑coated The Machine tap DIN 371B M10×1.5 HSS‑Co TiN 6H TECWERK is a straight‑flute metric ISO tap designed for producing high‑quality through threads in medium‑strength steels. HSS‑Co construction for high wear resistance TiN coating for extended tool life Straight flute (Form B) with flank relief ISO metric thread M10×1.5, tolerance 6H High performance for medium‑strength steels This machine tap combines HSS‑Co material with a TiN coating to deliver enhanced heat resistance and wear performance when machining steels up to 1000 N/mm². The cobalt‑alloy high‑speed steel base keeps the cutting edge stable at higher temperatures, while the titanium nitride surface reduces friction and improves chip evacuation. The result is a more consistent tool life and fewer interruptions in production, which supports higher overall equipment effectiveness. Consistent thread accuracy and interchangeability Built to DIN 371B and referenced to DIN 13 sheet 1, the tap produces a metric ISO thread M10×1.5 to tolerance class ISO2 (6H), ensuring precise mating with bolts and nuts across batches. The ISO2 (6H) tolerance guarantees the internal thread dimensions remain within standard limits, reducing rework and improving assembly reliability. For customers who rely on repeatable fits, this specification supports predictable assembly and quality control. Durable geometry that reduces downtime The straight flute (Form B) geometry with flank relief is optimised for reliable chip formation in blind or through applications and helps reduce burr formation on the flank. The TiN coating further lowers adhesion and wear on the cutting edges, extending intervals between tool changes. Fewer tool changes mean lower machine downtime and a more economical cost per threaded hole, making the tap suitable for both small batch runs and continuous production environments. Practical mounting and application notes With a shank Ø 10 mm, the tap fits standard collets and tap holders used on conventional and CNC tapping heads. The tool features a chamfered entry for through threads to assist starting and to promote clean thread run‑out. This tap is therefore suitable for straightforward integration into existing machining processes where metric ISO threads are required and where machinists need a reliable, easy‑to‑set‑up solution. For reliable, production‑grade threading select the TECWERK machine tap and contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867305NW Name: Machine tap DIN 371B M10×1.5 HSS‑Co TiN 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Specifications Thread size: M10×1.5 Shank diameter: 10 mm Tolerance class: ISO2 (6H) Suitable material strength: up to 1000 N/mm² Features Material: HSS‑Co (cobalt high‑speed steel) Coating: TiN Form: B, straight flute, flank relief Standard: DIN 371B, DIN 13 sheet 1 Chamfered entry for through holes FAQ What materials is this tap suitable for? The TECWERK machine tap is specified for use in steels up to 1000 N/mm² and is manufactured from HSS‑Co with TiN coating to withstand those conditions. What does the tolerance class 6H mean for finished threads? Tolerance class ISO2 (6H) denotes the internal thread tolerance; the tap produces threads within standard limits for reliable interchangeability with external fasteners. Can this tap be used in CNC tapping heads? Yes, the tap’s shank Ø 10 mm and straight‑flute Form B geometry make it compatible with standard collets and many CNC tapping holders. How does the TiN coating benefit production? The TiN coating reduces friction and wear, which extends tool life and lowers the frequency of tool changes, improving process uptime. Is this tool suitable for through holes only? The tool includes a chamfered entry for through threads but the straight‑flute geometry also allows versatile use; application depends on workpiece setup and machining strategy. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from a durable, high-performance cutting solution that combines HSS‑Co strength with a TiN wear barrier and precise ISO2 (6H) tolerance for reliable thread quality; order directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK machine tap M10 x 1.5 DIN 371B — HSS‑Co, TiN coated, ISO2 (6H) The TECWERK machine tap M10 x 1.5 is a universal-form, straight‑fluted machine tap designed for cutting metric ISO threads in a wide range of engineering materials. HSS‑Co alloy for high wear resistance TiN coating for extended tool life Straight flutes with chamfered flanks Metric ISO threads to ISO2 (6H) tolerance High cutting performance and consistent thread quality This universal-form machine tap delivers a reliable combination of cutting performance and longevity. Manufactured to DIN 371B, the tool is made from cobalt high‑speed steel (HSS‑Co) and finished with a TiN coating, which improves resistance to adhesion and wear under intermittent and continuous cutting conditions. The result is a steady production flow with fewer tool changes and more consistent thread geometry. The ISO2 (6H) tolerance ensures predictable fits for standard metric mating parts, supporting process stability in batch or automated machining. Versatile material range for workshop and industrial use The geometry and material pairing make this tap suitable for demanding applications in steel, stainless steel, spheroidal cast iron and various non‑ferrous metals. The cobalt content in the substrate increases red hardness and fracture resistance, which is particularly beneficial when machining tougher stainless steels or interrupted cuts. The TiN surface reduces friction and chip adhesion, helping to maintain cutting edges longer and to produce cleaner chips—especially important for through‑threading operations. Precision design that simplifies machining Engineered with straight flutes and chamfered, ground flanks, the tap provides controlled chip formation and a precise cutting action. The tool features a shear cut for through threads, optimised to create clean entry and exit surfaces when threading full bore holes. A shank diameter of 10 mm gives stable clamping in standard collets and holders, while compliance with DIN 13 sheet 1 assures correct pitch and profile for metric ISO threads. These design details translate into reduced rework, improved thread fit and predictable cycle times in production environments. Practical procurement and dependable supply chain advantages Sourcing this machine tap via Metav Werkzeuge brings the practical benefits of a specialist distributor: a broad range of precision tools, established quality control and a central European logistics hub for reliable delivery. Metav’s offering is aimed at workshops and industrial purchasers who require repeatable quality without excessive supplier complexity. If further technical data or confirmation of suitability for a specific application is needed, the sales team can provide clarification and supplementary specifications by email or phone. The combination of material capability, coating and tolerance delivers an efficient, long‑running tooling solution for regular threading tasks. Order the TECWERK M10 x 1.5 machine tap through Metav Werkzeuge for durable, TiN‑enhanced performance and reliable ISO2 (6H) thread accuracy — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and procurement support Technical data SKU: 2000867701NW Designation: Maschinengewindebohrer DIN 371B Univ.M10x1,5mm HSS-Co TiN 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867701NW Key figures Thread size: M10 x 1.5 Shank diameter: 10 mm Tolerance: ISO2 (6H) Standard: DIN 13 sheet 1 Design & features Material: HSS‑Co (cobalt high‑speed steel) Coating: TiN (titanium nitride) Form B · Universal type Straight flutes; green ring identification Flanks ground / chamfered flanks Shear cut for through threads Suitable for steel, stainless steel, spheroidal cast iron and non‑ferrous metals FAQ What materials is the TECWERK machine tap suitable for? The TECWERK machine tap M10 x 1.5 is suitable for steel, stainless steel, spheroidal cast iron and a range of non‑ferrous metals, thanks to its HSS‑Co substrate and TiN coating. How does the TiN coating benefit the tool? The TiN coating on the TECWERK machine tap reduces friction and improves wear resistance, extending tool life and helping to maintain consistent thread quality. What tolerance does the tap deliver and what does that mean? This tap produces metric ISO threads to ISO2 (6H) tolerance, providing standardised fits that are suitable for common engineering assemblies and predictable mating part engagement. Is the shank compatible with standard holders? With a shank diameter of 10 mm, the TECWERK machine tap clamps securely in typical collets and tap holders used for machine threading operations. Does the tap support through‑threading applications? Yes; the tap features a shear cut designed for through threads, which promotes clean chip evacuation and good surface quality at hole entry and exit. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund