VCMT160408-MM4 WMP20G WMP20G WMP20G Wendeplatten - Walter Tools
High productivity and secure chip control from the Tiger‑tec Gold grade combine with the MM4 chipbreaker and 0.8 mm corner radius to deliver reliable machining of stainless steel; order via Metav Werkzeuge or request cutting-data advice from our consultants. VCMT160408‑MM4 WMP20G – indexable turning insert, Tiger‑tec Gold, Walter Tools The VCMT160408‑MM4 WMP20G insert is a coated carbide tool for dependable turning applications, optimised for machining stainless steel under medium to robust cutting conditions Tiger‑tec Gold coated carbide grade Optimised MM4 chipbreaker 0.8 mm corner radius for durability 7° relief angle for secure engagement Increase throughput with stable chip formation and edge life The Tiger‑tec Gold WMP20G grade is engineered to maintain a stable cutting edge during the elevated temperatures and adhesive tendencies typical of stainless steel machining. The combination of a coated carbide substrate and the MM4 chipbreaker supports predictable chip flow, which reduces unexpected interruptions and improves cycle times. By choosing a cutting grade tailored for friction and heat management, shops benefit from fewer insert changes and a lower cost per component, while process planners gain reproducible results across series production. Consistent geometry for repeatable surface quality A Rhombic 35° insert form with a 0.8 mm corner radius and 7° clearance angle delivers a balanced interaction between strength and cutting engagement. The modest corner radius helps absorb cutting forces in tougher stainless grades without sacrificing surface finish, and the positive relief reduces rubbing and workpiece distortion. These geometric choices mean less rework and a more stable tool life curve, which supports predictable setup intervals and consistent component tolerances in batch production. Application-focused design that reduces machining risk Designed specifically for ISO group M applications, this turning insert performs well in medium to robust cutting conditions where built‑up edge and thermal load present challenges. The coated Tiger‑tec Gold surface enhances wear resistance and eases chip evacuation; the result is improved process security and a finish that often removes the need for additional secondary operations. For production environments seeking to balance productivity with repeatability, this insert offers a pragmatic combination of tool life and machining quality, backed by Walter Tools' development for tough stainless grades. For machining stainless steel with the proven Tiger‑tec Gold grade from Walter Tools, contact Metav Werkzeuge for availability and tailored cutting data — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCMT160408-MM4-WMP20G-WALTER Article designation: VCMT160408-MM4 WMP20G Manufacturer: Walter Tools Product type: indexable turning insert Grade: WMP20G Facts Inscribed circle: 16 mm Clearance angle: 7° Corner radius: 0.8 mm Geometry: Rhombic 35° Thickness code: 04 Tolerance class: M Special features Series: Tiger‑tec Gold Chipbreaker: MM4 Coated carbide grade Material group: M (stainless steel) Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The VCMT160408‑MM4 WMP20G insert from Walter Tools is optimised for ISO group M materials and is specifically designed to machine stainless steel under medium to robust cutting conditions. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes controlled chip formation and evacuation on the VCMT160408‑MM4 WMP20G, reducing the risk of entangling chips and improving process reliability in stainless steel turning. What are the key geometric features that influence tool life? The Rhombic 35° form, 0.8 mm corner radius and 7° relief angle of this Walter Tools insert balance cutting strength with engagement characteristics to extend edge life and maintain surface quality. Can this insert be used for light finishing cuts? While optimised for medium to robust conditions, the coated Tiger‑tec Gold grade on the VCMT160408‑MM4 WMP20G can also deliver acceptable surface finishes in many finishing operations when appropriate cutting data are applied. Is this an original manufacturer product? This article is offered as an original, factory‑new product from Walter Tools and carries the specifications shown for the VCMT160408‑MM4 WMP20G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of Walter Tools.
VCMT160408-MM4 WMP20S Wendeplatten - Walter Tools
Take advantage of the high-performance combination of the Tiger·tec Silver coating and the WMP20S grade for dependable machining of stainless steels; the rhombic 35° geometry and 0.8 mm corner radius provide stable cutting edges and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. VCMT160408-MM4 WMP20S — Indexable turning insert, Tiger·tec Silver grade for stainless steel (Walter Tools) A VCMT160408-MM4 WMP20S indexable turning insert engineered for machining stainless steel with a rhombic 35° geometry, optimised for secure chip formation and reliable edge stability. Tiger·tec Silver coated grade WMP20S Designed for stainless steel machining Rhombic 35° insert, 7° clearance Corner radius 0.8 mm for stable edge Reliable machining performance for stainless steel components The combination of the Tiger·tec Silver coating and the WMP20S carbide grade is tuned for the demands of ISO group M (stainless steel): increased heat resistance and improved wear behaviour support stable chip formation and reduce the risk of built-up edge. In practical terms, this means more predictable tool life and fewer unscheduled tool changes, improving throughput in serial production. The coated carbide substrate provides a balance between toughness and hardness suitable for medium to robust cutting conditions. Geometry and chip control that protect the workpiece and tool The rhombic 35° profile and 7° clearance angle promote a favourable cutting action for turning operations where controlled cutting forces and good surface finish are required. The MM4 chipbreaker is designed to guide and fracture chips effectively when machining ductile, work-hardening stainless steels, while the 0.8 mm corner radius gives a robust cutting edge that tolerates interruption and variable feed conditions. These geometric features reduce vibration and support consistent surface quality without complex parameter changes. Production advantages and process security With its standard VCMT designation and proven geometry, the insert fits common toolholders and indexable tool systems, simplifying inventory management. The WMP20S grade is aimed at repeatable, reliable performance under typical workshop and factory conditions, helping to reduce setup time and increase machine uptime. For operations seeking predictable output and straightforward grade selection, the plate’s tolerance class M and familiar form factor make integration into existing turning processes straightforward. Walter Tools’ product design emphasises process security and consistent results for demanding machining tasks. For ordering and application advice on this Walter Tools turning insert—VCMT160408-MM4 WMP20S—please contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable cutting parameters and availability. Technical data Article number: VCMT160408-MM4-WMP20S-WALTER Product: Turning insert VCMT160408-MM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: MM4 Shape: Rhombus 35° Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 Thickness code: 04 Tolerance class: M Numbers / Core technical data Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 mm Thickness code: 04 Tolerance class: M Special features Suitable for stainless steel (ISO group M) Coated carbide: Tiger·tec Silver Grade application: medium to robust cutting conditions Chipbreaker: MM4 Shape: Rhombus 35° Execution: T FAQ Which materials is this insert designed for? The VCMT160408-MM4 WMP20S insert is designed primarily for stainless steel (ISO group M), as indicated by the WMP20S grade and Tiger·tec Silver coating. What is the geometry and why does it matter? The insert uses a rhombic 35° shape with a 7° clearance angle; this geometry supports controlled cutting forces and a good surface finish, making it suitable for many turning applications on stainless steel. What chipbreaker does the insert use? This article features the MM4 chipbreaker, which assists in controlled chip formation when machining tough, ductile materials like stainless steels. What is the corner radius and how does it affect durability? The corner radius is 0.8 mm, providing a robust cutting edge that increases resistance to edge breakdown and helps maintain consistent surface quality under varying feed conditions. Is the insert coated and what are the benefits? Yes, the insert is part of the Tiger·tec Silver family—this coated carbide construction improves wear resistance and thermal stability during stainless steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
VCMT160408-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a controlled MM4 chipformer and a rhombic 35° geometry for reliable machining of tough alloys; order the insert directly via Metav Werkzeuge or ask our consultants if needed. VCMT160408-MM4 WSM10S indexable turning insert — Tiger·tec Silver, for rostfreier Stahl and superalloys — Walter Tools The VCMT160408-MM4 WSM10S is an indexable turning insert designed for demanding turning of rostfreier Stahl and heat‑resistant superalloys, offering a balance of edge stability and controlled chip formation for productive workshop use. Tiger·tec Silver coating for wear resistance MM4 chipformer for secure chip control Rhombic 35° form for versatile turning Optimised for rostfreier Stahl and superalloys High‑productivity performance for difficult materials The Tiger·tec Silver coating and the WSM10S grade combine to deliver longer tool life and consistent cutting behaviour when machining rostfreier Stahl and nickel‑base alloys. The coated cemented carbide substrate is engineered for heat resistance and abrasion protection, which means fewer tool changes and higher uptime on production runs. The result is measurable productivity: the combination reduces unscheduled interruptions and helps maintain part tolerances in series turning operations. Emphasis on repeatable cutting performance supports cost efficiency across batch processing. Controlled chip flow and stable cutting edge for reliable cycles The MM4 chipbreaker is tailored to generate short, controllable chips even in sticky or tough materials, reducing manual chip handling and risk of entanglement. The insert’s rhombic 35° form and 7° clearance angle work together to lower cutting forces and improve access in shoulder and profiling cuts. A 0.8 mm corner radius provides a compromise between edge strength and surface finish, enabling light finishing cuts while maintaining robustness during heavier passes. This geometry supports predictable process windows and simplifies parameter selection for operators. Practical benefits for toolrooms and production lines As an indexable turning insert, the VCMT160408‑MM4 WSM10S reduces tool inventory complexity by offering a widely used insert form in the Tiger·tec Silver family. The WSM10S grade is optimised for applications that demand both thermal resistance and stable edge life, making it suitable for workpieces prone to work‑hardening. Toolholders compatible with VCMT inserts allow fast indexing and minimal setup time, which shortens cycle start‑up and assists in meeting delivery schedules. Clear material group coding (S / M) aids in quick selection for rostfreier Stahl and heat‑resistant alloys. Application guidance and process reliability When replacing conventional grades with this coated insert, a moderate reduction of cutting speed and an increase in feed for roughing can often improve chip breaking and edge life; for finishing, small depths of cut and controlled feed rates help exploit the 0.8 mm radius for improved surface quality. The collective design — Tiger·tec Silver, MM4, rhombic 35° — is intended to enhance process reliability and reduce the frequency of rework. For unfamiliar workpiece materials or complex component geometries, a brief trial cut under monitored conditions is recommended to determine the optimal balance between productivity and finish. Contact Metav Werkzeuge for application recommendations and to request VCMT160408‑MM4 WSM10S inserts from Walter Tools; specialists are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VCMT160408-MM4-WSM10S-WALTER Designation: VCMT160408-MM4 WSM10S Type: Indexable turning insert Grade: WSM10S Series: Tiger·tec Silver Manufacturer: Walter Tools Key figures Plate size: 16 mm Clearance angle: 7° Corner radius: 0.8 mm Plate thickness code: 04 Tolerance class: M Design and features Chipbreaker: MM4 Plate form: Rhombus 35° Execution: T Material applicability code: S / M Suitable for: rostfreier Stahl; heat‑resistant superalloys FAQ What materials is this insert best suited for? The VCMT160408‑MM4 WSM10S is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO material groups M and S) and provides reliable chip control and edge stability in these applications. How does the MM4 chipformer affect machining? The MM4 chipbreaker on the VCMT160408‑MM4 WSM10S promotes short, controlled chips, which improves safety at the machine and reduces the need for manual chip management during turning cycles. Can this insert be used for finishing cuts? Yes; with its 0.8 mm corner radius and the coated grade, the insert supports light finishing passes that achieve good surface quality while retaining sufficient edge strength. What identification should be quoted when ordering? Please quote the full designation VCMT160408‑MM4 WSM10S and the SKU VCMT160408‑MM4‑WSM10S‑WALTER for precise order handling. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are used for identification and explanation only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original factory‑new goods of the manufacturer.
VCMT160408-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a proven MM4 chipbreaker and a rhombic 35° geometry for stable cutting in demanding materials; order the insert directly via Metav Werkzeuge or request advice from the consultants for application-specific recommendations. VCMT160408-MM4 WSM20S indexable turning insert — Tiger·tec Silver coating, rhombic 35° (Walter Tools) The VCMT160408-MM4 WSM20S is a rhombic 35° indexable turning insert designed for robust chip control and reliable edge stability in stainless steels and heat‑resistant alloys. Tiger·tec Silver coated carbide for extended tool life Optimised MM4 chipbreaker for secure chip control Rhombic 35° geometry for versatile turning tasks 0.8 mm corner radius and 7° relief for stable cutting Machining reliability for stainless steels and superalloys The insert is engineered with a Tiger·tec Silver coating on coated carbide, providing improved thermal resistance and reduced flank wear when machining stainless steels and superalloys. The coating system and substrate combination promote stable edge formation, which reduces the tendency for built-up edge and supports repeatable performance under elevated cutting temperatures. In practical terms, this means fewer unexpected tool changes and a more predictable process window during medium to heavy turning operations, particularly where heat generation and workpiece toughness are critical factors. Geometry and chip control that improve surface finish A Rhombic 35° geometry combined with the MM4 chipbreaker delivers controlled chip formation and reduced cutting forces in interrupted and continuous cuts. The 0.8 mm corner radius and 7° free angle maintain a favourable balance between edge strength and cutting aggressiveness, which helps to preserve surface integrity while avoiding undue tool loading. For operations requiring consistent finishes, the geometry minimises vibration and supports smoother tool engagement, hence contributing directly to improved productivity and fewer rework cycles. Productivity, economy and workshop advantages The carbide grade WSM20S is specified for applications in group M (stainless steels) and group S (heat‑resistant alloys / titanium), offering a wide material coverage that reduces tool inventory complexity. The stable edge behaviour and wear resistance of the grade extend the useful life of the insert, lowering tooling costs per part and improving overall process efficiency. For busy shops, the combination of coating and optimised chip control translates into higher uptime and predictable component quality — advantages that are particularly relevant for batch production and mixed‑material workloads. Practical notes on application and handling The insert is supplied in the standard VCMT format with size designation 16 and thickness code 04; it is intended for conventional indexable turning holders that accept rhombic 35° inserts. The MM4 chipbreaker is suitable for a wide range of feeds and depths of cut; however, cutting parameters should be adapted to the specific workpiece alloy and machine rigidity. Where high surface quality is required, modest feed rates and stable clamping will exploit the geometry’s benefits most effectively. For special applications in titanium or heavily work‑hardened stainless grades, adjust cutting speeds downward to maintain edge life. For reliable turning in stainless steels and heat‑resistant alloys, order the Walter Tools VCMT160408‑MM4 WSM20S via Metav Werkzeuge or contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VCMT160408-MM4-WSM20S-WALTER Label: Drehwendeschneidplatte VCMT160408-MM4 WSM20S Walter Tools Series: Tiger·tec Silver Grade: WSM20S Brand: Walter Tools Facts Insert size: 16 Thickness designation: 04 Corner radius: 0.8 mm Free angle: 7° Geometry: Rhombic 35° Special features Coating: Tiger·tec Silver Substrate / material: coated carbide (S / M) Chipbreaker: MM4 Tolerance class: M Suitable for: stainless steels (M) and heat‑resistant superalloys / titanium (S) Execution: T FAQ What materials is this insert best suited for? The VCMT160408‑MM4 WSM20S insert is optimised for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering stable chip formation and enhanced edge life in these materials. Which cutter holders are compatible with the insert? The rhombic 35° format fits standard indexable turning holders designed for VCMT inserts; holders must accept the size 16 geometry and thickness code 04 to ensure correct seating and clamping. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes consistent chip segmentation and secure evacuation across a range of feeds, reducing the risk of entangling chips and helping to maintain surface finish and tool life during continuous and interrupted turning. Can this insert be used for finishing and medium turning? Yes. The combination of the 0.8 mm corner radius and the coating makes the insert suitable for finishing and medium turning operations, provided cutting parameters are matched to the workpiece material and machine rigidity. Where to get advice on cutting data for this insert? Metav Werkzeuge provides application support for Walter Tools inserts; contact Metav Werkzeuge for cutting recommendations and process optimisation based on the VCMT160408‑MM4 WSM20S data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT160408-MP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of a robust cermet grade and a precise MP4 chipbreaker to secure consistent surface quality and economical tool life; compatible with Walter Cermet series components and supplied with tolerance class M for repeatable positioning — order the insert via Metav Werkzeuge or consult our technical advisers for application-specific selection. VCMT160408-MP4 WEP10C – Indexable turning insert, Rhombic 35°, Walter Tools The VCMT160408-MP4 WEP10C is an indexable turning insert designed for precision finishing and controlled chipbreaking in demanding production environments. VCMT160408-MP4 WEP10C by Walter Tools Walter Cermet grade WEP10C Rhombic 35° form, 7° clearance 0.8 mm corner radius, MP4 chipbreaker Superior surface finish with a dedicated cermet grade The WEP10C cutting grade, part of the Walter Cermet series, is engineered to deliver a fine surface quality and stable wear behaviour in finishing applications. As a cermet material, it combines ceramic hardness with metallic toughness, which supports reduced flank wear and consistent cutting performance over multiple indexings. Selecting a cermet grade is particularly advantageous when cycle times and post-process finishing costs must be minimised, since improved edge retention often translates into fewer tool changes and higher process uptime. Reliable chip control and edge stability for repeatable results The insert geometry — Rhombic 35° with a 7° clearance angle and a 0.8 mm corner radius — is optimised for stable engagement and predictable tool life. The MP4 chipbreaker design aids controlled chip formation across a range of light to medium finishing cuts, reducing the risk of built-up edge and improving swarf evacuation. Together these features lower the probability of workpiece surface defects and support constant dimensional accuracy, which is essential for series production where repeatability matters. Shop-floor integration and process security Tolerance class M ensures compatibility with standard toolholders and predictable seating repeatability, while the designation VCMT160408-MP4 and the base code indicate form factor and chipbreaker type for straightforward tool management. The insert is supplied in the Walter Cermet line and carries the WEP10C grade; material suitability should be verified against the specific product matrix before selection to match the intended workpiece material and operation. This approach helps to avoid mismatches in application and ensures the insert contributes to a stable, economical machining process. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to confirm the best grade and geometry for specific machining tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: VCMT160408-MP4-WEP10C-WALTER Item designation: VCMT160408-MP4 WEP10C Base designation: VCMT160408-MP4 Manufacturer: Walter Tools Series: Walter Cermet Facts Tolerance class: M Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 Thickness code: 04 Special features Cermet cutting grade WEP10C MP4 chipbreaker for controlled chips Rhombic 35° insert form Execution: T Walter Cermet series FAQ What machining tasks is this insert best suited for? The VCMT160408-MP4 WEP10C insert is intended for precision finishing and semi-finishing operations where a cermet grade and the MP4 chipbreaker support high surface quality and consistent edge performance. How does the WEP10C grade differ from conventional carbides? WEP10C is a cermet grade within the Walter Cermet series that emphasises wear resistance and surface finish; compared with many carbides it often provides improved edge life in finishing but should be matched to the specific material via the product matrix. Can the insert be used in standard toolholders? Yes — the VCMT160408-MP4 form and tolerance class M ensure compatibility with widely used indexable turning toolholders for secure seating and repeatable positioning. What role does the MP4 chipbreaker play during cutting? The MP4 chipbreaker promotes predictable chip formation and evacuation, which reduces built-up edge risk and supports stable cutting conditions for improved surface finish. How is the code VCMT160408-MP4 WEP10C interpreted? The code identifies the insert form (VCMT), nominal size (16), thickness designation (04), chipbreaker (MP4) and the cermet grade (WEP10C), allowing quick comparison and ordering of matching inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
VCMT160408-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold grade and the MP4 chipbreaker ensures consistent chip control and long tool life when turning steel; combine this with the compact rhombic 35° geometry for versatile operations — order the insert via Metav Werkzeuge or consult our specialists for application guidance and fast delivery. VCMT160408-MP4 WPP10G indexable turning insert by Walter Tools — for steel turning with Tiger·tec Gold coating VCMT160408-MP4 WPP10G is a rhombic 35° indexable insert designed for general steel machining, offering a balanced combination of wear resistance and toughness for stable, productive turning operations Tiger·tec Gold coating for extended life Optimised MP4 chipbreaker for consistent chips Rhombic 35° geometry for versatile turning 0.8 mm corner radius with 7° relief angle Consistent productivity through a balanced coating and grade The Tiger·tec Gold coating combined with the WPP10G grade provides a controlled wear profile that benefits series production and mixed-batch work. The coated cemented carbide construction gives a higher resistance to thermal and abrasive wear, which translates into more predictable tool life and fewer tool changes. For workshops machining unalloyed and alloyed steel, this combination reduces downtime and supports tighter process windows, allowing machines to run longer at stable cutting parameters. Reliable chip control that simplifies process setup Equipped with the MP4 chipbreaker, the insert produces short, manageable chips in typical steel applications, improving both safety and component quality. The chipformer is engineered to guide swarf away from the cutting zone, which lowers the risk of surface damage and protects the tool edge. This technical advantage means setup times are reduced and monitoring becomes simpler, contributing directly to higher throughput and fewer interrupted cycles on lathe or turning centres. Geometry and edge preparation for versatile turning tasks The rhombic 35° insert profile, together with a 0.8 mm corner radius and a 7° clearance angle, offers a good compromise between strength and accessibility. This geometry enables both roughing and light finishing cuts without frequent insert changes, supporting flexible production strategies. The medium corner radius helps dampen vibration on interrupted cuts while maintaining acceptable surface finishes, making the insert suitable for a broad range of turning operations on steel components. Contact Metav Werkzeuge today for tailored application advice and to secure the Walter Tools VCMT160408-MP4 WPP10G insert for your production needs; Metav Werkzeuge provides fast delivery and technical consultancy to optimise machining results Technical data Article number: VCMT160408-MP4-WPP10G-WALTER Product type: Turning indexable insert Designation: VCMT160408-MP4 WPP10G Brand: Walter Tools Facts Insert size: 16 mm Thickness: 4.0 mm Corner radius: 0.8 mm Relief angle: 7° Tolerance class: M Special features Tiger·tec Gold coating Grade: WPP10G Chipbreaker: MP4 Geometry: Rhombic 35° Series: Tiger-tec Gold Suitable for: Steel FAQ What materials is this insert suitable for? The VCMT160408-MP4 WPP10G is specified for machining steel (unalloyed and alloyed), reflecting the design focus of the WPP10G grade and the Tiger·tec Gold coating. How does the MP4 chipbreaker affect machining performance? The MP4 chipbreaker provides controlled, short chips in steel turning, improving swarf handling and reducing the likelihood of surface damage during the cut. Can the insert be used for both roughing and finishing? Thanks to the rhombic 35° geometry and a 0.8 mm corner radius, the insert is versatile enough to handle a range of operations from heavier roughing cuts to light finishing passes in steel. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT160408-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the optimised MP4 chipbreaker for consistent chip control and extended tool life; the Rhombic 35° geometry and 0.8 mm corner radius deliver reliable edge security in Stahl turning. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application support. VCMT160408-MP4 WPP20G – Walter Tools turning insert, Tiger‑tec Gold, Rhombic 35°, 7° clearance The VCMT160408-MP4 WPP20G is a rhombic 35° indexable turning insert designed for general Stahl machining, offering balanced toughness and wear resistance for a wide range of turning operations. Tiger‑tec Gold coating for long life Optimised MP4 chipbreaker for stable chips Rhombic 35° geometry for versatile turning 0.8 mm corner radius for durable edge Greater productivity through a high-performance coating The combination of the Tiger‑tec Gold coating with the WPP20G carbide grade provides measurable benefits in everyday production. The coating reduces flank and crater wear, while the substrate is tuned for balanced toughness and hardness, which together improve wear resistance and extend effective tool life. For general-purpose turning in Stahl, this results in fewer insert changes and more stable cycle times. The outcome is predictable performance and a reduced overall cost per part when compared with uncoated or lower‑grade alternatives. Reliable chip control and consistent surface quality The dedicated MP4 chipbreaker is engineered for stable chip formation across common cutting conditions encountered in turning. Combined with the Rhombic 35° geometry and the modest 7° clearance angle, it supports controlled chip flow and reduced vibration, producing a consistent surface finish. In practical terms, the geometry minimises cutting forces during interrupted cuts and offers better access in turning shoulders and profiles, which helps maintain dimensional integrity and lowers downstream rework. Robust edge security and dimensional stability Tolerance class M and a 0.8 mm corner radius provide a secure cutting edge that tolerates moderate variations in feed and material infeed without premature edge breakdown. The insert thickness and seat design ensure repeatable clamping and indexing, contributing to process stability in interchangeable toolholders. For operations where edge robustness and repeatability are priorities, the combination of radius, tolerance and coating delivers fewer edge‑related rejects and longer intervals between quality checks. Broad applicability and economic machining strategy Designed for the ISO P group, the insert is suitable for unalloyed and alloyed Stahl commonly used in parts production. Its balanced character—neither overly hard nor excessively tough—makes it versatile for a range of turning tasks, from finishing to medium‑depth roughing when cutting data is adapted accordingly. Employing this insert as part of a standardised tooling setup supports consistent cycle times and simpler inventory management, yielding better overall process economics. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools VCMT160408-MP4 WPP20G inserts; our consultants provide cutting data recommendations and fast procurement support Technical Data Article number: VCMT160408-MP4-WPP20G-WALTER SKU: VCMT160408-MP4-WPP20G-WALTER Product type: Drehwendeschneidplatte Facts Insert geometry: Rhombus 35° Relief angle: 7° Corner radius: 0.8 mm Insert size: 16 Thickness: 04 Chipbreaker: MP4 Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP20G Series: Tiger-tec Gold Substrate: coated carbide Application group: P (Stahl) FAQ What materials is this insert suitable for? The VCMT160408-MP4 WPP20G insert from Walter Tools is specified for machining materials in the ISO P group, i.e. a variety of Stahl types including unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on the VCMT160408-MP4 WPP20G promotes controlled chip formation and improved surface finish, reducing the risk of built-up edge and improving process reliability in turning operations. Is the insert suitable for finishing as well as roughing? Yes; with appropriate feeds and speeds the insert performs well in finishing and medium‑depth roughing on Stahl, thanks to the balanced WPP20G grade and the 0.8 mm corner radius. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new merchandise from the manufacturer.
VCMT160408-RK4 WKK10S RK4 Wendeplatten - Walter Tools
Efficient machining performance from the combination of a Tiger·tec Silver coating and an RK4 chipbreaker delivers stable chip control and extended edge life in abrasive cast iron applications; the rhombic 35° geometry and 0.8 mm corner radius further support repeatable turning results. Order the insert via Metav Werkzeuge for reliable supply, or contact our consultants for process-specific recommendations. VCMT160408-RK4 WKK10S turning indexable insert – Tiger·tec Silver coating, RK4 chipbreaker | Walter Tools A VCMT160408-RK4 WKK10S turning indexable insert optimised for high-performance cast iron turning and consistent chip control in production environments. Tiger·tec Silver coating for wear resistance Rhombic 35° geometry for versatile turning RK4 chipbreaker for stable chip control 0.8 mm corner radius for robust edge life Consistent productivity when machining cast iron The combination of a dedicated chipbreaker and a coated substrate is crucial for machining abrasive cast iron. This insert, built on a coated carbide grade from the Tiger·tec Silver family, focuses on controlling the short, brittle chips typical of cast iron. The RK4 chipbreaker promotes predictable chip formation, reducing the risk of built-up edge and machine downtime. For production runs, this reliably improves cycle times and lowers scrap rates by keeping the process stable. Longer tool life through advanced coating and geometry A hard-wearing Tiger·tec Silver coating paired with a balanced geometric design reduces abrasive wear and preserves the cutting edge. The 0.8 mm corner radius and the rhombic 35° shape distribute cutting forces evenly, which helps prevent premature edge chipping when facing intermittent cuts or interrupted surfaces. The result is fewer insert changes and longer intervals between tool inspections, enhancing overall process economy without sacrificing surface quality. Predictable results with production-oriented features The insert’s 7° relief angle and tolerance class M provide precision and repeatability for series production. The package thickness and form factor support secure clamping and repeatable seating in standard toolholders, which aids set-up speed and positional accuracy. Designed specifically for the material group cast iron, the grade delivers a good balance between wear resistance and toughness, making it suitable for a range of cast components where consistent machining performance is required. Speak to Metav Werkzeuge for tailored process advice or availability of Walter Tools inserts — our consultants will recommend cutting parameters and holders for optimal results in cast iron turning. Technical data Article number: VCMT160408-RK4-WKK10S-WALTER Designation: VCMT160408-RK4 WKK10S Product type: turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Chipbreaker: RK4 Facts Insert size: 16 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 7° Geometry: Rhombus 35° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK10S (coated carbide) Suitable material group: cast iron (K) Execution: T Focused on abrasive wear resistance and chip control for cast iron FAQ What materials is this insert best suited for? This insert is designed for machining cast iron; the WKK10S grade and Tiger·tec Silver coating specifically address the abrasive wear and short-chipping behaviour of cast materials. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker promotes controlled, short chips in cast iron, improving chip evacuation and reducing the likelihood of built-up edge during continuous and interrupted cuts. Can this insert be used for stainless steel or aluminium? The grade and geometry are optimised for cast iron; for materials such as stainless steel or aluminium, select an insert and grade specifically developed for those groups to ensure performance and tool life. What benefits does the rhombic 35° geometry provide? Rhombic 35° geometry offers versatility for general turning operations and provides favourable cutting angles for consistent surface finish and dimensional control on cast components. Is the corner radius suitable for heavy cuts? The 0.8 mm corner radius balances edge strength and form accuracy; it provides robust edge life for many production turning operations while still allowing fine surface results. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used for explanation only. No connection exists between Metav Werkzeuge and the mentioned brands beyond product distribution. The offered article is an original, factory-new part from Walter Tools.
VCMT160408-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, optimised chip control and precise geometry for reliable cast iron turning; request cutting data or a stock confirmation from Metav Werkzeuge to integrate these inserts into production planning. VCMT160408-RK4 WKK20S — Turning insert (Rhombic 35°, RK4) by Walter Tools The VCMT160408-RK4 WKK20S is a coated carbide turning insert designed for productive machining of cast iron, delivering stable chip formation and consistent surface quality in general turning applications. Tiger‑tec Silver coating for excellent wear resistance Optimised RK4 chipbreaker for stable chips Rhombic 35° form for versatile turning Designed for cast iron machining Increased productivity through tailored chip control The combination of the RK4 chipbreaker and the Tiger‑tec Silver coating is engineered to reduce downtime and improve process stability when machining abrasive cast iron grades. The chip geometry promotes short, broken chips that evacuate reliably from the cutting zone, lowering the risk of workpiece damage and tool interference. In practical terms, this means fewer interruptions for chip clearing and a higher effective spindle utilisation. The description of the grade emphasises adaptation to abrasive wear and rapid chip breakage, which supports consistent cycle times on series production. Predictable surface quality and stable cutting geometry The rhombic 35° insert geometry with a corner radius of 0.8 mm and a clearance angle of 7° provides a balanced cutting edge suitable for a wide range of turning tasks. The moderately small radius assists in obtaining a consistent surface finish while still allowing for light to medium depth cuts. The tolerance class M ensures repeatable seating in the toolholder and stable cutting conditions across insert changes. For those less familiar with insert geometry: the 35° rhombic form gives a compromise between strength and sharpness, allowing effective approach angles for longitudinal and facing operations. Robust grade and economical tool life for cast iron The WKK20S grade is a coated carbide designed specifically for cast iron applications, focusing on resistance to abrasive wear and the frequent short-breaking chips typical for these materials. Coating technology from the Tiger‑tec Silver family improves edge stability and extends the interval between indexings, contributing to lower tooling cost per part. The insert format VCMT160408-RK4 supports straightforward handling in standard toolholders and is suitable for machinists seeking a reliable, ready-to-use solution for series and single-part production on cast iron components. Request application advice or a stock check from Metav Werkzeuge to confirm suitability for specific workpiece material and cutting parameters; contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to obtain genuine Walter Tools inserts and recommended cutting data Technical data SKU: VCMT160408-RK4-WKK20S-WALTER Product: Turning insert (drehwendeschneidplatte) Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S ISO designation: VCMT160408-RK4 WKK20S Facts Size: 16 mm Thickness: 04 Corner radius: 0.8 mm Clearance angle: 7° Form: Rhombic 35° Tolerance class: M Special features Chipbreaker: RK4 Material application: Cast iron (K) Coating technology: Tiger‑tec Silver Substrate: Coated carbide Intended behaviour: optimised for abrasive wear and short‑breaking chips FAQ What materials is this insert intended for? The insert is designed primarily for machining cast iron; the WKK20S grade and Tiger‑tec Silver coating are optimised for abrasive cast iron and short-breaking chip behaviour. Which chipbreaker does the insert use and what benefit does it provide? The RK4 chipbreaker promotes controlled, short chips that evacuate reliably, reducing the need for manual chip clearing and improving process stability during cast iron turning. How does the rhombic 35° geometry affect cutting performance? A rhombic 35° form offers a compromise between edge strength and access angle, delivering consistent surface finish and suitability for both longitudinal turning and light facing cuts. What does the grade designation WKK20S mean for tool life? The WKK20S grade is a coated carbide formulation intended to resist abrasive wear typical of cast iron, which helps extend tool life and reduce tooling cost per part in series machining. Is the insert compatible with standard tooling systems? The VCMT160408-RK4 insert follows standard ISO insert dimensions and is compatible with holders designed for VCMT‑type rhombic 35° inserts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT160408-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Gold cutting grade and the RM4 chipbreaker for extended edge life and consistent chip control when machining rostfreier Stahl; the combination reduces downtime and supports stable production. Order the insert directly via Metav Werkzeuge or consult their experts for cutting data and application advice. VCMT160408-RM4 WMP20G – indexable turning insert, Tiger‑tec Gold, RM4 (Walter Tools) A VCMT160408-RM4 WMP20G indexable turning insert engineered for medium to robust machining of rostfreier Stahl with a Rhombus 35° geometry and a 0.8 mm corner radius Tiger‑tec Gold coating for improved edge life RM4 chipbreaker for stable chip control 7° clearance angle for secure engagement Rhombus 35° form with 0.8 mm radius Greater process reliability when machining rostfreier Stahl The combination of the Tiger‑tec Gold coating and the WMP20G grade is formulated specifically for the challenges of machining rostfreier Stahl. The coating reduces adhesion and thermal load at the cutting edge, which helps to avoid built-up edge and unplanned rework. In practice, this means longer intervals between insert changes and a more predictable component finish. The optimised cutting-grade chemistry supports a broad range of stainless alloys under medium to robust cutting conditions, delivering repeatable results and improved uptime. Predictable edge life and controlled chips for consistent productivity With the RM4 chipbreaker and a 0.8 mm corner radius, the insert provides secure edge strength while guiding chips reliably away from the cut. The 7° clearance angle reduces rubbing and heat generation at the flank, contributing to a stable cutting edge and a consistent surface quality. These geometric features together reduce the risk of premature edge failure and make tool-life planning more reliable, which benefits batch production and small-series work alike. The insert’s robust edge geometry supports higher metal-removal rates without sacrificing finish. Easy integration into existing toolholders and process chains The Rhombus 35° shape and ISO designation mean straightforward compatibility with standard toolholders used for turning operations. The insert is suitable for applications that demand durability and consistent results in rostfreie Stähle. Technical advisors can supply recommended cutting speeds and feeds for the WMP20G grade to match the specific alloy and machine rigidity. For customers seeking uncomplicated implementation, this grade offers a balance of process security and service life that aligns with production targets. For application-specific cutting data, availability and tailored recommendations for Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the Metav team will advise on the right setup and delivery options Technical data Article number: VCMT160408-RM4-WMP20G-WALTER SKU / label: Drehwendeschneidplatte VCMT160408-RM4 WMP20G Walter Tools Brand: Walter Tools Facts Insert size: 16 Corner radius: 0.8 mm Clearance angle: 7° Thickness code: 04 Special features Grade: WMP20G (Tiger‑tec Gold) Chipbreaker: RM4 Shape: Rhombus 35° ISO designation: VCMT160408-RM4 WMP20G Suitable for: rostfreier Stahl Execution: T Tolerance class: M FAQ Which materials is this insert designed for? The VCMT160408-RM4 WMP20G turning insert by Walter Tools is designed primarily for rostfreie Stähle and similar alloys where stable chip formation and thermal resistance are required. What are the main advantages of the WMP20G grade? WMP20G (Tiger‑tec Gold) combines a coated cemented carbide with enhanced adhesion resistance and heat tolerance, improving edge life and process security when machining rostfreie Stähle. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation and evacuation, which reduces the likelihood of entanglement and supports consistent surface finish and tool-life predictability. Can the insert be used in standard ISO toolholders? Yes, the Rhombus 35° geometry and ISO designation VCMT160408-RM4 make the insert compatible with standard turning toolholders designed for this form and size. What cutting data are recommended for this grade? Recommended cutting speeds and feeds depend on the specific rostfreier Stahl alloy and machine rigidity; Metav Werkzeuge can provide application-specific cutting data for the VCMT160408-RM4 WMP20G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer. Walter Tools (brand of Walter AG) is a global manufacturer of precision cutting tools and is part of the Sandvik Group.
VCMT160408-RM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the RM4 chipbreaker for stable chip control and consistent performance when machining rostfreien Stahl; the compact rhombic shape and 0.8 mm corner radius support precision turning in medium to robust conditions. Order the VCMT160408-RM4 WMP20S inserts directly via Metav Werkzeuge or consult the technical team for application-specific advice. VCMT160408-RM4 VCMT160408-RM4 WMP20S — indexable turning insert, Tiger·tec Silver, for rostfreien Stahl (Walter Tools) A VCMT160408-RM4 WMP20S indexable insert engineered for reliable finishing and semi‑roughing of rostfreien Stahl, combining a wear‑resistant coating with a chipformer optimised for secure chip breaking under demanding thermal conditions. Tiger·tec Silver coating for rostfreien Stahl RM4 chipbreaker for stable chip control Rhombic 35° form, 0.8 mm corner radius 7° clearance angle for reliable tool life High‑performance cutting for rostfreien Stahl The coated grade delivers controlled cutting performance on rostfreien Stahl, a material group prone to built‑up edge and thermal sensitivity. The Tiger·tec Silver technology provides a hard, wear‑resistant surface that reduces flank wear and supports consistent cutting forces; combined with the WMP20S composition, the result is improved process reliability. For shops aiming to reduce scrap rates and minimise rework, the insert’s design contributes to a more predictable machining window and consistent component quality. Reliable chip control and surface consistency Chip formation is a central factor when machining tough alloys; the RM4 chipbreaker is shaped to promote short, controllable chips in a variety of cutting depths and feeds. The rhombic 35° geometry and 0.8 mm corner radius aid entry and exit behaviour, reducing vibration and producing a steady surface finish. In practice, the insert enables stable cuts during interrupted machining and supports repeatable tolerances, which benefits batch production and mixed‑series manufacturing alike. Longer tool life and economical machining A combination of coating and substrate ensures the cutting edge retains its shape under moderate thermal load. The 7° clearance reduces rubbing at the flank, lowering heat build‑up and preserving edge integrity. This leads to fewer indexings and lower tooling costs per part over time. From a cost‑efficiency perspective, the grade’s balanced wear resistance and toughness provide a favourable life‑cycle compared with uncoated or less optimised grades when applied to rostfreien Stahl. Integration into the machining process and handling The insert’s standard VCMT160408‑RM4 form facilitates straightforward toolholder compatibility for many common turning systems, allowing rapid replacement and alignment on the toolpost. The consistent geometry simplifies setting cutting parameters and supports standardised processes across machines. For production environments where reproducibility and quick changeovers matter, the insert helps maintain throughput without sacrificing surface quality. Contact Metav Werkzeuge for tailored recommendations on employing Walter Tools Tiger·tec Silver inserts in specific rostfreien Stahl applications and for assistance with parameter selection and tooling packages Technical data Article number: VCMT160408-RM4-WMP20S-WALTER SKU: VCMT160408-RM4-WMP20S-WALTER Manufacturer: Walter Tools Product type: indexable turning insert Grade: WMP20S Series: Tiger·tec Silver Facts Corner radius: 0.8 mm Clearance angle: 7° Insert form: Rhombic 35° Plate size: 16 Plate thickness: 04 Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Material application: rostfreien Stahl Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The VCMT160408‑RM4 WMP20S insert is designed primarily for machining rostfreien Stahl and performs well under medium to robust cutting conditions specified for that material group. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on the Walter Tools VCMT160408‑RM4 WMP20S promotes short, reliable chips and improves process stability, particularly useful during interrupted cuts and higher feed operations. What benefits does Tiger·tec Silver provide? The Tiger·tec Silver coating on this grade increases wear resistance and thermal stability, extending edge life and helping to maintain dimensional consistency when turning rostfreien Stahl. Is the insert compatible with standard toolholders? The VCMT160408‑RM4 geometry is a standard rhombic 35° form and is compatible with a wide range of common toolholders, simplifying integration into existing turning setups. How should the insert be indexed and monitored? Index the insert according to the holder manufacturer’s guidance and monitor flank wear and surface finish; the WMP20S grade typically allows extended index intervals due to its balanced toughness and coating. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are cited solely for explanation. There is no affiliation between our company and the named brands. The offered article is original factory‑new merchandise of the manufacturer.
VCMT160408-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a stable RM4 chipbreaker and a compact Rhombus 35° geometry for consistent machining of stainless steel and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult our specialists for process optimisation. VCMT160408-RM4 VCMT160408-RM4 WSM10S — Indexable turning insert for stainless steel and superalloys (Walter Tools) VCMT160408-RM4 WSM10S is a rhombic 35° indexable turning insert developed for reliable performance in demanding turning operations on stainless steel and heat‑resistant alloys. Tiger·tec Silver coating resists heat Optimised RM4 chipbreaker for stable chips Suitable for stainless steel and superalloys Keep production running with reliable chip control The insert’s RM4 chipbreaker is designed to promote a predictable chip form under interrupted and continuous turning, reducing the risk of built‑up edge and machined surface defects. Stable chip evacuation lowers rework rates and shortens cycle times, which improves overall productivity in serial production. For shops converting programmes from conventional grades, the RM4 geometry helps to maintain process stability without extensive parameter trials, enabling faster ramp‑up and fewer rejected parts. Coating and grade engineered for tough materials The combination of the WSM10S coated carbide grade and the Tiger·tec Silver technology targets the thermal and mechanical stresses typical of machining stainless steel and S‑group materials. The coating increases heat resistance and reduces adhesion at the cutting edge, which extends edge life and helps to maintain dimensional accuracy over longer tool life. For components where consistent surface finish and repeatability are essential, this coated grade reduces downtime for insert changes and supports cost‑effective, continuous operation. Geometry that balances access, strength and finish Featuring a Rhombus 35° cutting face with a 0.8 mm corner radius and a 7° clearance, the geometry is optimised for turning where a balance between cutting edge robustness and accessibility is required. The rhombic shape allows machining close to shoulders and in tight grooves, while the moderate corner radius supports edge strength for interrupted cuts. These characteristics contribute to a reliable surface finish and predictable tool wear, making the insert suitable for a wide range of external and light internal turning tasks. Designed for shopfloor integration and consistent results As an indexable insert from Walter Tools’ Tiger·tec Silver series, this solution integrates into standard toolholders and turning systems with minimal setup changes. The grade’s behaviour under higher temperatures and tendency for stable chip formation contribute to lower tooling consumption per part and reduced process variability. For production engineers focused on repeatable cycle times and quality, selecting this insert supports a measurable improvement in machining stability and part throughput. For high‑temperature and demanding turning tasks, consider the Walter Tools VCMT160408‑RM4 WSM10S insert and contact Metav Werkzeuge for tailored cutting data and practical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VCMT160408-RM4-WSM10S-WALTER Article designation: VCMT160408-RM4 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Free angle: 7° Corner radius: 0.8 mm Insert size: 16 mm Thickness code: 04 Tolerance class: M Special features Chipformer: RM4 Coating/technology: Tiger·tec Silver (coated carbide) Grade: WSM10S Plate form: Rhombus 35° Execution: T Materials: stainless steel and S‑group superalloys suitability FAQ What materials is this insert suited for? The VCMT160408‑RM4 WSM10S is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering enhanced heat resistance and chip control for those materials. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker on this insert promotes stable chip formation and evacuation, reducing built‑up edge and supporting continuous production with fewer interruptions. What does the Tiger·tec Silver series provide? Tiger·tec Silver coating improves thermal resistance and edge life; in the WSM10S grade this leads to more consistent cutting performance on demanding alloys. Which geometrical features influence surface finish? The Rhombus 35° shape, combined with a 0.8 mm corner radius and 7° clearance, balances edge strength and accessibility, helping to achieve a predictable surface finish and reduced vibration in many turning operations. Can the insert be used in standard toolholders? Yes, the insert is compatible with common indexable turning holders designed for VCMT‑type inserts, facilitating straightforward integration into existing turning systems. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory‑new goods from Walter Tools.
VCMT160408-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM20S grade for stable edge life when machining stainless steel and heat‑resistant superalloys; the rhombic 35° geometry with a 0.8 mm corner radius and 7° clearance ensures reliable surface quality and predictable tool life. Order directly via Metav Werkzeuge or consult the team for process‑specific recommendations. VCMT160408-RM4 WSM20S — Turning insert, Tiger‑tec Silver grade, for stainless steel & superalloys (Walter Tools) VCMT160408-RM4 WSM20S is an indexable turning insert optimised for machining stainless steel and heat‑resistant superalloys, combining a thermally resistant coating with a geometry tuned for stable cutting. Tiger‑tec Silver coating for enhanced wear resistance WSM20S grade optimised for stainless steel and superalloys Rhombic 35° form with 0.8 mm corner radius 7° clearance angle for consistent edge stability Consistent performance on difficult-to-machine alloys The combination of the Tiger‑tec Silver coating and the WSM20S carbide grade is engineered to resist thermal and mechanical wear encountered when machining stainless steel and superalloys. The coating reduces adhesion and built‑up edge while the grade supports a stable cutting edge at elevated temperatures. For production environments where repeatable tool life matters, this insert reduces unplanned interruptions and contributes to more consistent cycle times — a clear rational advantage for mixed‑batch or serial turning operations. Geometry that improves surface finish and chip control A rhombic 35° insert form with a 0.8 mm corner radius delivers a balance between robustness and the ability to achieve good surface finish in finishing and medium‑depth turning. The RM4 chipbreaker is designed to promote controllable chip formation and smooth evacuation, which is particularly important when removing long, stringy chips from ductile alloys. The 7° clearance angle supports stable contact between the tool and workpiece, helping to maintain dimensional accuracy and reduce vibration during cuts. Productivity gains and shop-floor compatibility The VCMT geometry is widely supported by standard toolholders, enabling quick indexable insert changes and straightforward tool management. The combination of predictable wear behaviour and the Tiger‑tec Silver system means fewer tool changes and higher uptime, leading to improved productivity and lower machining cost per component. As a Walter Tools product, the insert benefits from a portfolio approach that simplifies grade selection for specific materials and cutting conditions, supporting process optimisation across a range of turning applications. Discuss application requirements and reserve VCMT160408-RM4 WSM20S inserts through Metav Werkzeuge; for material‑specific advice contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCMT160408-RM4-WSM20S-WALTER ISO designation: VCMT160408-RM4 WSM20S Type: Turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 Thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WSM20S (coated carbide) Chipbreaker: RM4 Form: Rhombic 35° Material suitability: S / M (stainless steel and heat‑resistant superalloys/titanium) FAQ Which materials are recommended for these inserts? The VCMT160408-RM4 WSM20S insert is specified for stainless steel (M) and for heat‑resistant superalloys/titanium (S), where thermal resistance and edge stability are critical. What does the RM4 chipbreaker achieve in practice? The RM4 chipbreaker promotes short, controlled chips and reliable evacuation, improving surface finish and reducing the risk of chip entanglement in applications using this Walter Tools turning insert. Which machining operations suit the rhombic 35° form? The 35° rhombic form is versatile for general turning, especially where a compromise between reach and strength is needed; it supports finishing and medium cutting with consistent results. How does the Tiger‑tec Silver coating affect tool life? The Tiger‑tec Silver coating reduces heat‑related wear and adhesion tendencies, which in turn extends tool life and delivers more stable cutting performance in demanding materials. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany; part of the Walter AG group. Protected trademarks and trade names are the property of their respective owners. The mentioned brand is used for explanation only; the offered item is original and factory‑new.
VCMT160408-RM4 WSM30S T Wendeplatten - Walter Tools
Take advantage of a proven combination of thermal resistance, reliable chip control and consistent edge life for uninterrupted production. Benefit from the Tiger·tec Silver coating and the RM4 chipbreaker that together enhance process stability when machining stainless steel and heat‑resistant alloys; order through Metav Werkzeuge or request application advice from our consultants. VCMT160408-RM4 WSM30S indexable turning insert — Walter Tools, Tiger·tec Silver coating, RM4 chipbreaker A VCMT160408-RM4 WSM30S indexable turning insert designed for secure, productive turning of stainless steel and heat‑resistant superalloys in demanding workshop and production environments Tiger·tec Silver coated, WSM30S grade Optimised for stainless steel and superalloys RM4 chipbreaker for secure chip control 7° clearance, 0.8 mm corner radius Higher throughput when machining challenging materials The VCMT160408-RM4 WSM30S insert pairs a Tiger·tec Silver coated carbide substrate with a grade tuned for difficult‑to‑machine alloys, which improves thermal resistance and preserves cutting‑edge stability. This results in longer edge life and fewer tool changes, increasing machine uptime and lowering per‑part tooling costs. The coating reduces friction and helps control temperatures at the cutting zone; the net effect is a more consistent surface finish and a reduced tendency for built‑up edge when turning stainless steel or nickel‑based alloys. Stabilised cutting process through effective chip control The integrated RM4 chipbreaker is engineered to control chip formation across a range of cutting depths and feeds, turning long, stringy swarf into short, manageable segments. Predictable chip geometry reduces the risk of workpiece damage and tool interference, supporting safer automatic machining and simplified post‑process handling. The geometry combined with a 0.8 mm corner radius and 7° clearance promotes a robust cutting edge, so the insert tolerates interrupted cuts and variable engagement without rapid edge degradation. Precision, repeatability and easy workshop integration The rhombic Rhombus 35° form and tolerance class M ensure stable seat and predictable orientation in standard toolholders, facilitating reproducible results from batch to batch. As a coated carbide grade, the insert is suitable for a broad range of applications in stainless and high‑temperature alloys, reducing the need for numerous special‑purpose tools. Clear designation and standard sizing simplify inventory management and make it straightforward to specify replacements for series machining or critical production runs. Contact Metav Werkzeuge for tailored application recommendations and rapid supply of Walter Tools Tiger·tec Silver inserts such as the VCMT160408-RM4 WSM30S Technical data SKU: VCMT160408-RM4-WSM30S-WALTER Label: Drehwendeschneidplatte VCMT160408-RM4 WSM30S Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger·tec Silver Grade: WSM30S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 (nominal) Thickness code: 04 Tolerance class: M Special features Coating technology: Tiger·tec Silver Chipbreaker: RM4 Insert form: Rhombus 35° Suitable for: stainless steel (M) and heat‑resistant superalloys/titanium (S) Execution: T FAQ What materials is this insert best suited for? The VCMT160408-RM4 WSM30S insert and the Walter Tools Tiger·tec Silver grade are optimised for stainless steel and for heat‑resistant superalloys, offering thermal resistance and stable edge performance. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker on this WC‑based insert produces controlled, short chips that aid safe automatic machining, minimise swarf handling and protect the workpiece surface. What does the 0.8 mm corner radius mean for my component finish? A 0.8 mm corner radius enhances edge strength and contributes to a consistent surface finish; it is a compromise between robustness and the ability to achieve fine contour detail. Can the insert handle interrupted cuts or unstable engagement? Yes; the combination of grade, coating and geometry makes this insert resilient to interrupted cuts and variable engagement, maintaining edge stability under fluctuating loads. Which holder form is compatible with the Rhombus 35° insert? Standard turning toolholders designed for rhombic 35° indexable inserts are compatible; the tolerance class M supports accurate seating and repeatable orientation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter AG and part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise of the manufacturer.
VCMT160408-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP10G grade for extended tool life and consistent steel machining; the insert’s rhombus 35° geometry and RP4 chipbreaker ensure flexible turning and stable chip control. Order or request advice directly via Metav Werkzeuge for a production‑ready supply. VCMT160408-RP4 WPP10G turning indexable insert with Tiger·tec Gold for steel — Walter Tools VCMT160408-RP4 WPP10G is a rhombic 35° turning indexable insert engineered for reliable, high‑productivity machining of steel in general turning applications. Tiger·tec Gold coating, extended tool life WPP10G grade optimised for steel machining Rhombus 35° geometry for versatile turning 0.8 mm corner radius with 7° relief angle Consistent cutting performance for steel applications The combination of the Tiger·tec Gold coating and the WPP10G carbide grade provides a robust, wear‑resistant cutting edge targeted at machining steel (ISO group P). The coating technology reduces abrasive and adhesive wear at elevated temperatures, which translates into longer intervals between index changes and fewer unscheduled tool exchanges. This results in a measurable increase in throughput and a more predictable process window when turning unalloyed and alloyed steels. For operations prioritising consistent surface quality and tool life, the coated carbide mix supports higher metal removal rates while maintaining dimensional stability. Geometry that balances accessibility and edge strength The rhombus 35° shape with a 0.8 mm corner radius and 7° relief angle combines access for profiling and semi‑finishing with sufficient edge strength for interrupted cuts. The RP4 chipbreaker is designed to form controllable chips when machining steel, improving evacuation in through‑cut and shoulder operations and reducing the risk of built‑up edge. Together, these geometric features make the insert suitable for a wide range of turning tasks where a balance between surface finish and robustness is required. The compact rhombic form also simplifies toolholder selection for both batch production and jobbing work. Process reliability and lower operating cost per part Adopting this insert supports higher process reliability and predictable tool performance, which are crucial for cost control in production environments. The WPP10G grade delivers a compromise between wear resistance and toughness, making it a versatile choice across varying steel compositions and cutting conditions. Reduced tool change frequency and stable cut behaviour minimise production interruptions and support better utilisation of machine time. For purchasers managing tool inventories, the use of a widely applicable grade and a standard rhombic geometry helps streamline stocking and reduces the variety of inserts required across different turning tasks. If clarification on grade selection or machining parameters is needed, technical advisors can provide tailored recommendations. For high‑productivity steel turning with Walter Tools, request a customised supply or machining recommendation from Metav Werkzeuge — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VCMT160408-RP4-WPP10G-WALTER Designation: VCMT160408-RP4 WPP10G Product type: turning indexable insert Grade: WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 16 Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Material group suitability: P (steel) Chipbreaker: RP4 Shape: Rhombus 35° Execution: T FAQ What materials is this insert suitable for? The VCMT160408-RP4 WPP10G insert from Walter Tools is specified for ISO group P and is therefore intended primarily for machining steel. What are the main benefits of the Tiger·tec Gold coating? The Tiger·tec Gold coating on the VCMT160408-RP4 WPP10G improves wear resistance and heat tolerance, contributing to longer tool life and more consistent cutting performance in steel turning. Which geometric features affect cutting behaviour? The rhombus 35° shape, 0.8 mm corner radius and 7° relief angle, combined with the RP4 chipbreaker, provide a compromise between accessibility, edge strength and chip control for flexible turning operations. How does the WPP10G grade influence machining results? The WPP10G grade is engineered for a balance of toughness and wear resistance, enabling reliable results across a broad range of steel alloys and helping to reduce the frequency of insert changes. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no commercial relationship implied between Metav Werkzeuge and the named brands. The offered item is original and brand‑new from the manufacturer Walter Tools.
VCMT160408-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a versatile WPP20G grade tailored for steel (ISO P) and a precise rhombic 35° geometry with RP4 chip control for consistent production. Order directly via Metav Werkzeuge or ask the consultants for application advice. VCMT160408-RP4 WPP20G turning indexable insert — Tiger‑tec Gold, for steel machining (Walter Tools) The VCMT160408-RP4 WPP20G is a turning indexable insert designed for efficient steel machining, combining a coated carbide grade from the Tiger‑tec Gold series with geometry optimised for controlled chip formation and stable cutting performance. Tiger‑tec Gold coated grade WPP20G Designed for steel machining (ISO P) Rhombic 35° shape with 7° relief RP4 chipbreaker, 0.8 mm corner radius Consistent cutting performance through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP20G grade provides a reliable balance between wear resistance and toughness, which translates into steady tool life and predictable tool-change intervals. The coated carbide substrate resists abrasive wear common in steel turning and reduces flank wear progression, so production runs remain stable under varying cutting conditions. For operations where repeatability and process stability matter, this configuration reduces the need for frequent tool readjustments and supports uninterrupted machining cycles. Geometry and chip control for safer, faster turning The rhombic 35° insert geometry with a 7° relief angle and RP4 chipbreaker is engineered to produce short, controlled chips during transverse and light‑profile turning on steels. The 0.8 mm corner radius offers a compromise between robustness and surface finish, helping to maintain edge integrity on interrupted cuts while delivering a consistent finish on continuous passes. Precise chip control decreases the risk of entanglement and aids coolant access, contributing to safer machining at higher metal removal rates. Practical application and compatibility in workshop setups Specified for the ISO P group, the insert suits a wide range of unalloyed and alloyed steels encountered in general machining. The nominal size and thickness ensure compatibility with common tool holders designed for 16 mm‑class rhombic inserts, enabling straightforward integration into existing tool sets. The product’s RP4 chip control and coated surface facilitate productive turning across batch and single‑piece production, supporting both stable long runs and short setup cycles where consistent surface quality is required. Contact Metav Werkzeuge for tailored grade selection and to arrange delivery of Walter Tools VCMT160408-RP4 WPP20G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: VCMT160408-RP4-WPP20G-WALTER Article: VCMT160408-RP4 WPP20G Brand: Walter Tools Product type: Turning indexable insert Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: RP4 Shape: Rhombic 35° Suitable for: Steel (ISO P) Execution: T Facts Size: 16 mm Thickness: 4 mm Relief angle: 7° Corner radius: 0.8 mm Tolerance class: M Special features Coating: Tiger‑tec Gold Material: Coated carbide Application: Steel machining (ISO P) Balanced wear resistance and toughness Optimised chip control for turning FAQ What materials is this insert intended for? The VCMT160408-RP4 WPP20G is specified for ISO P (steel) materials and is optimised for unalloyed and alloyed steels. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, which helps to sustain cutting performance during prolonged steel turning operations. Which chipbreaker and geometry are included and why do they matter? The insert features the RP4 chipbreaker and a rhombic 35° shape; this combination promotes controlled, short chips and a reliable cutting edge for a wide variety of turning tasks. How does the 0.8 mm corner radius affect the result? A 0.8 mm corner radius improves edge strength for interrupted cuts while maintaining an acceptable surface finish on continuous passes, balancing durability and workpiece quality. Is the insert compatible with standard 16 mm tool holders? Yes, the nominal 16 mm size and 4 mm thickness align with common holders for rhombic 35° inserts used in conventional turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers, Walter Tools.
VCMT160408-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and improved tool life thanks to the Tiger·tec Gold grade and RP4 chip control, optimised for steel machining. Order the insert directly via Metav Werkzeuge or consult our team for application-specific recommendations. VCMT160408-RP4 VCMT160408-RP4 WPP30G WPP30G — Turning indexable insert for steel, Walter Tools A VCMT160408-RP4 WPP30G turning insert designed for reliable steel machining with Tiger·tec Gold coating and a Rhombic 35° geometry for versatile turning operations Tiger·tec Gold coating for extended life Optimised RP4 chipbreaker for stable chips Rhombic 35° geometry for versatile turning 0.8 mm corner radius for consistent edge strength Maximise uptime with predictable wear behaviour The Tiger·tec Gold grade WPP30G delivers a balance of wear resistance and toughness that is particularly suited to steel (ISO group P). Its coated carbide composition provides stable edge retention across a wide range of cutting conditions, which reduces unplanned tool changes and supports steady production. By combining a durable grade with a proven chipbreaker design, the insert helps to maintain consistent part quality and minimise rework. Reliable chip control and surface quality in turning The RP4 chipbreaker and the Rhombic 35° shape work together to control chip flow and heat generation during turning. Stable chip formation reduces the risk of built-up edge and improves surface finish on turned components, translating into fewer secondary operations. The 0.8 mm corner radius supports a strong cutting edge for robust performance on interrupted cuts and ensures repeatable results in batch production. Practical geometry for flexible workshop use With a small clearance angle of 7° and a compact inscribed size, this insert is suited to a variety of lathe setups and tool holders. The geometry permits close cutting approaches and is compatible with standard clamping systems, allowing straightforward integration into existing tool inventories. The specification supports a pragmatic balance between precision and productivity for job shops and production environments machining steel. Process benefits and operational efficiency Adopting a coated grade such as WPP30G enables higher metal removal rates in many steel applications while keeping tool life predictable. The insert’s characteristics favour fewer tool changes and reduced machine idle time, contributing to improved process economics. Operators and process planners can rely on the insert’s repeatable performance to maintain cycle times and part tolerances. Contact Metav Werkzeuge for a tailored recommendation on how the Walter Tools VCMT160408-RP4 WPP30G insert can be integrated into current turning processes and for ordering guidance Technical data SKU: VCMT160408-RP4-WPP30G-WALTER Designation: VCMT160408-RP4 ISO designation: VCMT160408-RP4 WPP30G Series: Tiger-tec Gold Grade: WPP30G Facts Size: 16 mm Thickness code: 04 Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: M Special features Geometry: Rhombic 35° Chipbreaker: RP4 Execution: T Material group application: Steel (P) Coating technology: Tiger·tec Gold FAQ What materials is this insert suitable for? The VCMT160408-RP4 WPP30G insert is intended for machining steel (ISO group P) and is optimised for typical heat and chip-formation behaviour when turning unalloyed and alloyed steels. How does the Tiger·tec Gold grade affect tool life? The Tiger·tec Gold-coated grade WPP30G increases wear resistance and edge stability, resulting in longer life under standard turning conditions and more consistent performance across production runs. Is the chip control suitable for medium-depth turning operations? Yes, the RP4 chipbreaker is designed to provide controlled chips during a range of cutting depths, supporting stable machining and improved surface finish when used in appropriate cutting parameter windows. Can this insert handle interrupted cuts? The 0.8 mm corner radius and the robust coated carbide grade make the insert resilient to shock loads typical of interrupted cutting, giving reliable edge strength in such applications. Which toolholders are compatible with the Rhombic 35° geometry? Standard toolholders designed for VCMT-format rhombic inserts are compatible; the insert’s small clearance angle also supports versatile mounting options for turning tasks. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
VCMT160412-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of a coated carbide grade and a proven RK4 chipbreaker to secure consistent machining of cast iron, combined with the Tiger·tec Silver series for extended tool life and process stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. VCMT160412-RK4 WKK10S turning indexable insert – Tiger·tec Silver, RK4 for cast iron (Walter Tools) The VCMT160412-RK4 WKK10S is a rhombic 35° turning indexable insert engineered for efficient and stable machining of cast iron, offering a coated carbide grade tailored to abrasive, short-chip conditions. Tiger·tec Silver coating for wear resistance Optimised RK4 chipbreaker for cast iron chips Rhombic 35° geometry for stable turning 1.2 mm corner radius for robust edge life Achieve consistent productivity with wear-resistant cutting grade The insert’s WKK10S grade, part of the Tiger·tec Silver series, provides a coated carbide construction optimised for the abrasive nature of cast iron. This means the grade resists flank and crater wear while maintaining cutting-edge integrity over extended cycles, which in turn reduces tool change frequency and supports uninterrupted production. The result is a measurable improvement in process reliability and machining economy for series turning and semi-finishing operations. Reliable chip control and secure cutting behaviour in cast materials The RK4 chipbreaker is designed specifically to handle the frequently short and brittle chips typical of cast iron; it promotes controlled fragmentation and evacuation, lowering the risk of chip build-up and surface damage. Combined with the rhombic 35° insert geometry, the system provides predictable cutting forces and stable contact conditions, which help to preserve machine spindle life and improve surface quality during steady cutting regimes. Geometry and edge strength for repeatable tool life With a 1.2 mm corner radius and a proven plate form, the insert delivers a robust cutting edge that tolerates intermittent impact and variable feed conditions. The tolerance class M supports consistent fit and interchangeability in standard tool holders, ensuring repeatable clamping and dimensional stability. These design choices translate into fewer stoppages and a dependable edge life that aids planning and reduces unplanned downtime. For availability, technical specifications or application advice on Walter Tools VCMT160412-RK4 WKK10S inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with our technical consultants. Technical data Article number: VCMT160412-RK4-WKK10S-WALTER Item designation: VCMT160412-RK4 WKK10S Brand: Walter Tools Product type: Turning indexable insert Facts Plate size: 16 Plate thickness: 04 Corner radius: 1.2 mm Clearance angle: 7° Plate form: Rhombic 35° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: RK4 Material application: Cast iron (ISO group K) Execution: T FAQ What materials is this insert suited for? The VCMT160412-RK4 WKK10S insert is intended for machining cast iron and is optimised for abrasive, short-chip behaviour typical of that material. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKK10S grade improves wear resistance and edge stability, extending service life and helping to maintain consistent part quality under industrial loads. Is the RK4 chipbreaker suitable for finishing cuts? The RK4 chipbreaker is designed for controlled chip formation in cast iron and performs well across roughing to semi-finishing ranges; cutting parameters should be adjusted according to the required surface finish. Can this insert be used in standard tool holders? Yes, the insert’s dimensions and tolerance class M are compatible with common tool holders designed for VCMT-style plates, enabling straightforward interchangeability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names and registered trademarks serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
VCMT160412-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life, controlled chip formation and material-specific performance to increase process reliability in cast iron turning; order genuine Walter Tools inserts through Metav Werkzeuge or consult our team for application support. VCMT160412-RK4 WKK20S indexable turning insert — RK4 chipbreaker, Tiger·tec Silver for cast iron — Walter Tools A VCMT160412-RK4 WKK20S indexable turning insert designed for efficient machining of cast iron components, combining a Tiger·tec Silver coating with an RK4 chipbreaker for stable, repeatable cutting performance. Tiger·tec Silver coating for extended tool life Optimised for cast iron (ISO group K) RK4 chipbreaker for controlled chip formation Rhombic 35° shape with 1.2 mm corner radius Longer tool life through coating technology The Tiger·tec Silver coating and the WKK20S grade are engineered for the abrasive nature of cast iron. The combination reduces flank and crater wear, which leads to a longer tool life under industrial turning conditions. For machining centres and lathes where tool change frequency impacts uptime, the reduced wear translates into fewer interruptions and lower tooling-related downtime. Consistent chip control and process security The RK4 chipbreaker is specifically shaped to handle the short, brittle chips typical of cast iron. This results in predictable chip behaviour and safer swarf evacuation during both continuous and interrupted cuts. Stable chip formation improves process security and helps maintain surface quality without complex coolant strategies. Geometry that supports productivity and accessibility The rhombic 35° insert form with a 1.2 mm corner radius and a 7° clearance angle provides a balance between cutting strength and accessibility in tight turn features. The insert geometry enables productive cuts on shoulders and profiles while keeping cutting forces moderate, which is particularly beneficial for medium to heavy-duty turning operations in production environments. Application guidance and material fit Classified for ISO group K (cast iron), this insert is tailored to the material’s abrasive wear patterns and tendancy to form short chips. Its coated cemented carbide composition makes it suitable for components where reproducible edge life and surface finish are required. For customers less familiar with insert selection: choosing the correct chipbreaker and grade reduces the need for trial-and-error setup and speeds up process ramp-up. Operational advantages in series production Using this insert in serial machining can improve overall process economics by reducing the frequency of regrinding or replacement and by ensuring more consistent component quality. The robust cutting edge and coating technology contribute to stable cutting performance and predictable tool-change intervals, supporting both small-batch flexibility and high-volume throughput. Contact Metav Werkzeuge for tailored recommendations and availability of Walter Tools Tiger·tec Silver inserts such as VCMT160412-RK4 WKK20S — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific tooling solutions Technical data Article number: VCMT160412-RK4-WKK20S-WALTER Designation: VCMT160412-RK4 WKK20S Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Size: 16 Thickness: 04 Corner radius: 1.2 mm Clearance angle: 7° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK20S (coated cemented carbide) Chipbreaker: RK4 Shape: Rhombus 35° Suitable for: cast iron (ISO group K) FAQ What materials is this insert intended for? The VCMT160412-RK4 WKK20S is intended primarily for cast iron applications and is optimised for the abrasive and short-chip characteristics of those materials. Which chipbreaker does the insert use and why is that important? The insert features an RK4 chipbreaker; this chipbreaker design promotes controlled, short-chip formation, improving swarf control and process reliability when turning cast iron. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKK20S grade reduces abrasive wear and extends edge life, resulting in longer tool life and fewer tool changes in serial machining. Is the insert suitable for interrupted cuts? Yes, the combination of grade and geometry offers good resistance to mechanical and thermal stress, making it appropriate for interrupted cuts commonly encountered in component turning. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCMT160412-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold grade, the RM4 chipbreaker and the low 7° clearance for reliable machining of stainless steel under medium to robust conditions. Order this insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. VCMT160412-RM4 WMP20G turning insert — Walter Tools, Tiger·tec Gold, for stainless steel The VCMT160412-RM4 WMP20G is a rhombic 35° indexable turning insert designed for secure and repeatable cutting of stainless steel in medium to robust machining conditions. Tiger·tec Gold coating for longer tool life Optimised chipbreaker RM4 for stable chips 7° clearance angle for secure cutting Rhombus 35° geometry for versatile turning Consistent performance through Tiger·tec Gold technology The coated-carbide WMP20G grade, produced under Tiger·tec Gold technology, provides a balanced combination of wear resistance and edge stability. This results in predictable tool life when machining stainless steel, where workpiece toughness and heat generation typically challenge cutting edges. The coating supports controlled oxidation and thermal resistance, which helps to limit build-up and preserve a sharp cutting line; this means fewer interruptions for tool changes and steadier process windows in production environments. Secure chip control and geometry that aids productivity The insert’s RM4 chipbreaker and Rhombus 35° form promote effective chip segmentation and evacuation, reducing the risk of entanglement and inconsistent surface finish. The moderate 1.2 mm corner radius contributes to robust edge strength while allowing acceptable surface quality on external turning operations. Combined with the modest 7° clearance angle, the geometry supports stable engagement and repeatable cutting forces, which helps maintain spindle load consistency and tool-seat reliability during longer runs. Application benefits and process reliability Built for medium to robust cutting, this indexable insert supports operations where secure chip formation and predictable wear are priorities. The grade is optimised for the machining behaviour of stainless steel, addressing common issues such as work hardening and built-up edge. In practice, this leads to fewer stoppages for edge dressing and a smoother transition from roughing to finishing passes. Maintenance routines become more straightforward, and overall process stability improves, which contributes to higher throughput and reduced scrap rates. Contact Metav Werkzeuge for tailored application advice on the Tiger·tec Gold WMP20G insert or order via Metav Werkzeuge GmbH; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: VCMT160412-RM4-WMP20G-WALTER Label: Drehwendeschneidplatte VCMT160412-RM4 WMP20G Walter Tools Designation: VCMT160412-RM4 Grade: WMP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Insert shape: Rhombus 35° Chipbreaker: RM4 Clearance angle: 7° Corner radius: 1.2 Size: 16 Thickness code: 04 Material class: M Facts Size: 16 Corner radius: 1.2 Clearance angle: 7° Thickness code: 04 Special features Tiger·tec Gold coated carbide grade Optimised RM4 chipbreaker for stable chips Suited for stainless steel (ISO group M) Rhombic 35° insert geometry Designed for medium to robust cutting conditions FAQ What materials is this insert best suited for? The VCMT160412-RM4 WMP20G is designed primarily for machining stainless steel (ISO group M), where its coating and chip control properties address toughness and heat-related issues. Which chipbreaker and geometry does the insert use? This turning insert features the RM4 chipbreaker and a Rhombus 35° shape, which together support controlled chip formation and versatile turning operations. For which cutting conditions is the WMP20G grade intended? The WMP20G grade is targeted at medium to robust machining conditions, offering a balance of wear resistance and edge stability for continuous production on challenging workpieces. Is the insert indexable and suitable for repeatable positioning? Yes; the VCMT160412-RM4 is an indexable turning insert designed for secure seating and repeatable positioning in standard toolholders. How does the Tiger·tec Gold coating improve the process? The Tiger·tec Gold coating enhances thermal and wear resistance, improving edge life and reducing the tendency for built-up edge when machining stainless steel, which supports longer uninterrupted cycles. Manufacturer: Walter Tools; part of the Sandvik Group; AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only and indicate no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
VCMT160412-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Choose the VCMT160412-RM4 WSM20S for productive turning of stainless steel and heat‑resistant alloys; the Tiger·tec Silver coating and RM4 chipbreaker deliver stable chip control and extended edge life. Order directly via Metav Werkzeuge or consult our tooling specialists for process‑specific advice. VCMT160412-RM4 WSM20S Turning Insert – Tiger·tec Silver coating, for stainless steel and superalloys by Walter Tools A VCMT160412-RM4 WSM20S turning insert designed for demanding interrupted cuts and continuous production where predictable tool life and secure chip control are required Tiger·tec Silver coating for enhanced edge life Optimised RM4 chipbreaker for stable chips 7° clearance and 1.2 mm corner radius Suited to stainless steel and superalloys Improved productivity when machining difficult-to-cut alloys The coated carbide grade WSM20S, built on Walter Tools’ Tiger·tec Silver technology, provides a reliable balance between wear resistance and toughness. This makes it especially suitable for machining stainless steel and heat‑resistant alloys (ISO groups M and S). The result is consistent edge stability, which reduces the frequency of tool changes and contributes directly to higher component throughput. For users seeking measurable process improvements, the combination of a robust coating and an application‑oriented chipbreaker supports longer uninterrupted cycles and fewer quality interruptions. Reliable chip control and surface quality with optimised geometry The insert’s RM4 chipbreaker is engineered to form short, controllable chips under typical turning conditions for challenging materials. Together with the rhombus 35° geometry and 7° clearance, this leads to lower cutting forces in many applications and a more predictable cut. The corner radius 1.2 mm balances strength at the cutting edge with achievable surface finish, so machinists gain both process reliability and improved part aesthetics. The term “chipbreaker” here denotes the micro‑geometry that shapes and breaks chips to prevent entanglement and protect the workpiece surface. Practical benefits for workshop efficiency and tool handling The insert format is industry‑standard and compatible with a wide range of toolholders, enabling simple integration into existing toolsets. The coated carbide construction of this turning insert supports productive machining across a broad material spectrum while maintaining stable cutting edges in continuous production. By selecting a purpose‑matched grade such as WSM20S, procurement teams and process engineers can reduce set‑up variability and focus on optimising cutting data rather than compensating for premature wear. This leads to lower downtime and a clearer return on tooling decisions. For application‑specific recommendations with Walter Tools’ VCMT160412-RM4 WSM20S and tailored cutting data, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will support selection and integration into the production flow Technical Data Article number: VCMT160412-RM4-WSM20S-WALTER ISO designation: VCMT160412-RM4 WSM20S Series: Tiger·tec Silver Grade / Sort: WSM20S Facts Clearance angle: 7° Corner radius: 1.2 mm Insert shape: Rhombus 35° Insert size: 16 mm Thickness: 04 Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Material base: coated carbide Material applications: stainless steel (ISO M), superalloys and titanium (ISO S) FAQ Is this insert suitable for stainless steel? Yes. The VCMT160412-RM4 WSM20S is designed for stainless steel (ISO group M) and offers optimized edge stability for these materials. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM20S grade improves wear resistance and thermal stability, contributing to longer edge life under demanding conditions. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker shapes and breaks chips to reduce entanglement and improve evacuation, providing safer, more consistent machining with fewer interruptions. Which geometry features help achieve good surface finish? The rhombus 35° form combined with a 1.2 mm corner radius and 7° clearance produces balanced cutting forces and a stable cut, supporting improved surface quality. Can this insert be used in standard toolholders? Yes. The VCMT format is widely supported and can be integrated into common turning toolholders for straightforward replacement and set‑up. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation or partnership implied between our company and the named manufacturers. The offered item is an original, unused product of the respective manufacturer.
VCMT160412-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of thermal-stable Tiger·tec Silver coating and the RM4 chipbreaker for predictable chip control and longer tool life; suitable for machining stainless steels and heat-resistant superalloys. Order directly via Metav Werkzeuge or consult our technical team for application advice. VCMT160412-RM4 WSM30S – Turning indexable insert with Tiger·tec Silver coating and RM4 chipbreaker (Walter Tools) The VCMT160412-RM4 WSM30S is a rhombic 35° turning insert engineered for stable, productive machining of stainless steels and heat-resistant superalloys in demanding turning operations Tiger·tec Silver coating for thermal stability RM4 chipbreaker for reliable chip control Suitable for stainless steels and superalloys 1.2 mm corner radius for robust edge life Consistent performance for difficult materials The Tiger·tec Silver grade WSM30S delivers a balance of heat resistance and edge stability tailored to challenging materials. Designed for ISO groups M (stainless steels) and S (superalloys and titanium), the carbide-based, coated grade supports steady chip formation and reduces the risk of built-up edge. For production environments this means fewer interruptions, more predictable tool changes and improved process reliability through stable cutting-edge behaviour. Geometry that reduces machining risk and improves repeatability A rhombic 35° form combined with a 7° relief angle and a 1.2 mm corner radius provides a controlled cutting action and robust corner strength. The insert geometry reduces cutting forces on interrupted cuts and supports consistent surface finishes on cylindrical and profiling tasks. These dimensions help maintain tool life under moderate to heavy feed conditions while preserving repeatable component tolerances and minimising vibration-induced errors. Coating and chip control that boost throughput The RM4 chipbreaker is engineered to produce short, controlled chips in a range of turning depths, improving evacuation in both wet and dry machining. Coupled with the Tiger·tec Silver coating, the combination enhances temperature management at the cutting zone and prolongs the life of the cutting edge. For manufacturers this translates into higher effective spindle time and reduced scrap rates, particularly when machining heat-prone stainless alloys. Practical compatibility and handling in workshop workflows This insert is supplied in the standard VCMT format and is compatible with common toolholder systems designed for rhombic inserts of this size. The designation VCMT160412-RM4 indicates nominal 16 mm plate size and the thickness code 04, facilitating straightforward selection from tooling lists. The coated, indexable design allows multiple indexings per insert, reducing tooling costs and simplifying inventory management for production and job-shop settings. For material-specific recommendations or to discuss how the VCMT160412-RM4 WSM30S can be integrated into existing turning processes, contact Metav Werkzeuge for application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VCMT160412-RM4-WSM30S-WALTER Article number / designation: VCMT160412-RM4 WSM30S Product type: Turning indexable insert Manufacturer: Walter Tools Facts Geometry: Rhombus 35° Relief angle: 7° Corner radius: 1.2 mm Plate size: 16 mm Thickness code: 04 Tolerance class: M Special features Coating / grade: Tiger·tec Silver, WSM30S (coated carbide) Chipbreaker: RM4 Suitable materials: Stainless steels (ISO M), heat-resistant superalloys and titanium (ISO S) Series: Tiger·tec Silver Execution / form: T FAQ What materials is this insert suitable for? The VCMT160412-RM4 WSM30S is formulated for stainless steels (ISO M) and heat-resistant superalloys/titanium (ISO S), offering stable cutting behaviour in these groups. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes short, controlled chips and improved evacuation, which enhances process security and reduces chip handling issues when using the VCMT160412-RM4 insert. Can the insert be indexed to extend life? Yes, the indexable design of the VCMT160412-RM4 WSM30S allows multiple indexings to maximise tool life and lower tooling costs in production workflows. What is the benefit of the Tiger·tec Silver coating? The Tiger·tec Silver coating increases thermal resistance and edge stability, supporting longer cutting intervals and more consistent surface quality with this Walter Tools insert. Which toolholders are compatible with this format? Standard holders for VCMT-format rhombic 35° inserts are compatible with the VCMT160412-RM4 designation; ensure holder specifications match the plate size and clamping type. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
VCMT160412-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a dedicated WPP10G grade and the RP4 chipbreaker for consistent steel machining performance; order the inserts directly via Metav Werkzeuge or contact the consultants for tailored recommendations. VCMT160412-RP4 WPP10G — Turning insert, Tiger‑tec Gold, RP4 chipbreaker (Walter Tools) VCMT160412-RP4 WPP10G is a rhombic 35° turning insert designed for high-productivity steel machining with a wear-resistant Tiger‑tec Gold coating Tiger‑tec Gold coating for extended tool life WPP10G grade optimised for steel machining RP4 chipbreaker for controlled chip formation 35° rhombic shape with 1.2 mm nose radius Increased productivity through a wear-resistant grade The combination of the WPP10G grade and the Tiger‑tec Gold coating delivers enhanced wear resistance and thermal stability during continuous turning operations on steel. The coated carbide substrate is formulated to resist the typical heat and abrasion encountered when machining unalloyed and alloyed steels, which results in a more consistent cutting edge and longer service intervals. This increases machine uptime and reduces insert changes, providing a clear efficiency advantage in serial production and job-shop environments. Consistent chip control and improved surface finish The RP4 chipbreaker is configured to produce predictable chip forms for conventional turning of steel, reducing risk of chip entanglement and facilitating stable tool behaviour. Combined with the rhombic 35° geometry and a 1.2 mm nose radius, the insert supports reliable edge contact and a controlled cutting width, which contributes to an improved surface finish and dimensional repeatability. Technical terms explained: the chipbreaker shapes the chip to break into manageable segments, while the nose radius influences both strength at the cutting edge and the achievable surface quality. Geometry and handling for cost-effective turning The insert’s geometry — rhombic 35°, 16 mm inscribed circle and 04 thickness designation — offers a versatile balance between access to features and edge stability. The positive clearance angle of 7° reduces cutting forces and is beneficial when interrupted cuts or narrow shoulders are involved. The overall specification supports straightforward indexable-insert replacement and predictable wear progression, which simplifies inventory handling and process planning for production teams seeking repeatable results at competitive operating costs. Contact Metav Werkzeuge for application-specific cutting data and to request supply of Walter Tools VCMT160412-RP4 WPP10G inserts, including recommended speeds, feeds and clamping options Technical Data SKU: VCMT160412-RP4-WPP10G-WALTER Article designation: VCMT160412-RP4 WPP10G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Core data Inscribed circle: 16 mm Nose radius: 1.2 mm Clearance angle: 7° Thickness: 04 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Chipbreaker: RP4 Geometry: Rhombic 35° Edge form: T Material suitability: Steel (P group) FAQ What materials is this insert intended for? The VCMT160412-RP4 WPP10G insert is specified for machining steel (ISO group P) and is optimised for the thermal and chip formation conditions typical of steel turning. How does the Tiger‑tec Gold coating benefit performance? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, which extends tool life and maintains cutting-edge integrity under continuous operation. What advantages does the RP4 chipbreaker provide? The RP4 chipbreaker produces predictable chip segmentation and reduces the likelihood of long, stringy chips, improving process safety and easing chip handling in turning operations. Is the geometry suitable for finishing or general-purpose turning? The rhombic 35° geometry with a 1.2 mm nose radius and 7° clearance offers a compromise between strength and accessibility, making it suitable for both stable general-purpose turning and controlled finishing cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT160412-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of high productivity, stable chip control and extended tool life offered by this coated carbide grade; order the VCMT160412-RP4 WPP20G via Metav Werkzeuge or consult the technical advisors for machining recommendations. VCMT160412-RP4 WPP20G — Indexable turning insert, Tiger‑tec Gold coating, for Stahl | Walter Tools The VCMT160412-RP4 WPP20G is an indexable turning insert engineered for precision turning of Stahl, combining a robust rhombic geometry with a dedicated RP4 chipbreaker for reliable chip control. Tiger‑tec Gold coated carbide grade WPP20G RP4 chipbreaker for stable chip control Rhombic 35° profile with 1.2 mm corner radius Optimised for Stahl machining Consistent productivity through an optimised cutting grade The coated carbide WPP20G in the Tiger‑tec Gold series is specified for reliable performance when machining Stahl according to ISO 513. The combination of a wear-resistant coating and a formulation tuned to typical heat and chip characteristics of Stahl results in stable chip control and consistent cutting results. For production environments this stability reduces cycle-time variability and contributes to a predictable process window, supporting uninterrupted machining and fewer insert changes. Extended tool life from advanced surface engineering The insert’s coated carbide construction provides enhanced resistance against abrasive and adhesive wear mechanisms encountered in turning operations. The Tiger‑tec Gold technology is designed to protect the cutting edge, which translates into longer tool life and fewer interruptions for index changes. This durability supports higher uptime and improved cost-efficiency per component produced, particularly in medium- to high-volume machining of plain and alloyed Stahl. Geometry and chipbreaker designed for edge stability and surface finish The rhombic 35° profile with a 1.2 mm corner radius delivers a good balance between edge strength and accessibility for versatile turning tasks. The RP4 chipbreaker promotes favourable chip formation and evacuation, helping to avoid entanglement and tool nose damage. The insert’s 7° clearance angle supports a stable cutting edge contact and contributes to a consistent surface finish, especially in semi-finish and finish passes where dimensional control matters. Practical application advice and machinability overview This indexable insert is optimised for the ISO P group and suited to a broad range of Stahl materials, from unalloyed to alloyed grades. Tolerance class M indicates a standard precision suited to general turning tasks. The insert performs well in both continuous and interrupted cuts when paired with a suitable turning holder and correct clamping. For best results, match the RP4 chipbreaker with the intended depth of cut and feed range, and monitor wear progression to schedule timely indexing and replacement. Order original Walter Tools inserts through Metav Werkzeuge for assured availability and expert advice; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application support Technical data SKU: VCMT160412-RP4-WPP20G-WALTER Designation: VCMT160412-RP4 WPP20G Product type: Turning insert (indexable) Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 1.2 mm Clearance angle: 7° Insert size: 16 mm Thickness code: 04 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Shape: Rhombic 35° Optimised application: Stahl (ISO P) Execution: T FAQ What materials is this insert suitable for? The VCMT160412-RP4 WPP20G is optimised for machining Stahl (ISO P); the grade and coating are selected to handle the heat and chip behaviour typical of these materials. What are the key geometric specifications to note? The insert features a rhombic 35° form with a 1.2 mm corner radius, an RP4 chipbreaker and a 7° clearance angle, which together balance edge strength, chip control and surface finish. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WPP20G grade improves wear resistance and edge stability, leading to longer tool life and more consistent tool performance when turning Stahl. Is this insert suitable for rostfreier Stahl applications? rostfreier Stahl suitability is not specified for this grade; the VCMT160412-RP4 WPP20G is primarily recommended for Stahl in accordance with ISO 513 The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for descriptive purposes only; there is no affiliation or endorsement implied.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com