CCMT120412-MW4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust MW4 chipbreaker geometry and a compact rhombic form for reliable steel turning and stable chip control; order the CCMT120412-MW4 WPP20G turning insert directly via Metav Werkzeuge or consult the technical team for application advice. CCMT120412-MW4 WPP20G turning insert — Tiger·tec Gold coated, for steel machining (Walter Tools) CCMT120412-MW4 WPP20G is an indexable turning insert designed for precision steel machining, combining a Tiger·tec Gold coated carbide grade with a rhombic 80° form for consistent chip formation and extended tool life Tiger·tec Gold coating for stable cutting performance Designed for steel machining (ISO group P) Rhombic 80° form with 7° relief angle 1.2 mm corner radius for reliable edge strength Improve process reliability with advanced coated carbide The Tiger·tec Gold coating and the Walter Tools carbide substrate deliver a balance between wear resistance and toughness. This combination reduces flank and crater wear under typical steel cutting temperatures, resulting in a more consistent tool life and fewer tool changes per shift. The coated structure is engineered to support stable chip formation, which lowers the risk of built-up edge and unexpected downtime. Specified as a coated carbide grade, the insert suits production environments where repeatable results and lower machining variation are essential. Geometry focused on surface quality and dimensional control With a rhombic 80° outline, a 7° free angle and a 1.2 mm corner radius, the insert geometry supports controlled cutting forces and predictable engagement with the workpiece. The positive rake and relief geometry minimise vibration and help produce a consistent surface finish, while the corner radius provides edge strength for interrupted cuts. These features translate into fewer rework operations and improved dimensional stability on turned components, particularly when repeatable finishes are critical to downstream processes. Versatile performance across common steel grades Assigned to ISO group P, the grade is tailored for machining unalloyed and alloyed steels, covering a spectrum from wear-resistant to tougher steel conditions. The Walter Tools WPP20G grade is positioned as a universal option within the Tiger·tec Gold family, enabling one insert to serve multiple applications and reducing inventory complexity. For production planners, this means fewer variant tools on the shelf and easier tool selection, while operators benefit from a predictable cutting response when switching between similar steel families. Practical integration for workshop and production use The CCMT form fits standard toolholders designed for this insert designation and is supplied in a tolerance class M, ensuring consistent seating and repeatable clamping performance. The designation indicates a proven balance between manufacturing tolerances and economical production. The insert thickness code and size provide compatibility with commonly used turning tool carriers in industrial turning centres. For implementation, machine setup should consider the recommended cutting data for steel with coated carbide inserts to achieve the best wear behaviour and surface results. For robust, process-secure steel turning with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for application-specific advice and order guidance — Metav Werkzeuge can provide tailored recommendations for production setups and insert selection. Technical data SKU: CCMT120412-MW4-WPP20G-WALTER Designation (ISO): CCMT120412-MW4 WPP20G Type: turning insert Core data Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MW4 Relief angle: 7° Corner radius: 1.2 mm Insert form: Rhombus 80° Insert size: 12 Thickness code: 04 Tolerance class: M Special features Coated carbide Application: steel (ISO group P) Stable chip formation Universal grade for varied steel conditions Manufacturer: Walter Tools FAQ What materials are suitable for this insert? The CCMT120412-MW4 WPP20G turning insert is intended for machining steel and is classified for ISO group P, covering unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP20G grade improves wear resistance and supports stable chip formation, which enhances tool life and process consistency in steel turning operations. What is the significance of the 1.2 mm corner radius? A 1.2 mm corner radius provides a stronger cutting edge that tolerates interrupted cuts and reduces edge chipping while helping to maintain surface integrity. Is this insert compatible with standard CCMT toolholders? The insert follows the CCMT designation and fits toolholders designed for CCMT inserts; its tolerance class M supports consistent seating and repeatable clamping. Which chipbreaker is integrated and what is its purpose? The insert uses the MW4 chipbreaker, which is engineered to produce controlled chips and improve evacuation during turning of steel materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation and reference only. The offered article is an original, factory-new product of the stated manufacturer.
CCMT120412-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
The combination of targeted chip control, abrasion‑resistant coating and stable cutting geometry delivers reliable productivity for cast‑iron turning and boring; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CCMT120412‑RK4 WKK10S — Turning/boring indexable insert, Tiger·tec Silver, Walter Tools The CCMT120412‑RK4 WKK10S is a rhombic 80° indexable insert designed for machining cast iron, offering enhanced wear resistance and controlled chip formation for consistent production results Tiger·tec Silver coating for abrasive wear resistance Optimised chip former RK4 for cast iron Rhombic 80° insert with 7° relief angle 1.2 mm nose radius for stable cutting performance Durable coating and proven wear resistance for cast‑iron work The Tiger·tec Silver coating combines a hard, wear‑resistant surface with an engineered substrate to resist abrasive wear typical of grey and nodular cast iron. This coating technology ensures longer edge life under intermittent and interrupted cuts, reducing the frequency of index changes and supporting steadier tool costs per part. The designated chipformer, RK4, is engineered to promote short, controllable chips when machining cast‑iron grades, which leads to fewer interruptions in automated cells and improved process stability. Stable geometry for repeatable surface quality A rhombic 80° geometry with a 7° relief angle and a 1.2 mm nose radius delivers a balanced combination of strength and finishing capability. The robust geometry supports higher radial engagement and light finishing passes with reduced vibration, producing consistent surface finish and dimensional repeatability. Thanks to the insert thickness and form, the cutting edge maintains mechanical stability during plunge and boring operations, helping to keep cycle times predictable across batch production. Integration and productivity advantages in the machining process As an indexable insert for conventional holders, this grade simplifies tool management and inventory: one insert type covers common cast‑iron operations, reducing setup complexity. The coated cemented‑carbide substrate and optimised chip control translate into fewer tool changes and lower machine downtime, which improves overall throughput. For production environments seeking dependable performance, the insert supports economical machining by extending service intervals and enabling consistent output across shifts. Application focus: efficient machining of cast iron The cutting grade is tailored for ISO group K materials, making it particularly suitable for cast‑iron components where short, brittle chips and abrasive wear are prevalent. Typical uses include facing, profiling and semi‑finishing operations on grey and nodular cast iron where stable chip flow and edge security are priorities. The insert’s chipformer and coating combination help mitigate the effects of abrasive inclusions and thermal loads often encountered in foundry‑derived workpieces. For machining tasks that demand reliable performance in cast‑iron applications, contact Metav Werkzeuge to discuss the CCMT120412‑RK4 WKK10S insert, request cutting data or arrange a tailored recommendation from the technical advisers at Metav Werkzeuge. Technical Data Article number: CCMT120412‑RK4‑WKK10S‑WALTER Designation: CCMT120412‑RK4 WKK10S Brand: Walter Tools Series: Tiger·tec Silver Facts Insert shape: Rhombus 80° Relief angle: 7° Nose radius: 1.2 mm Insert size: 12 Thickness designation: 04 Chipformer: RK4 Tolerance class: M Execution: T Special features Coating: Tiger·tec Silver Substrate: coated cemented carbide Application group: cast iron (ISO K) Optimised for short, brittle chips Stable cutting edge for repeatability Suitable for turning, boring and semi‑finishing FAQ What materials is this insert designed for? The CCMT120412‑RK4 WKK10S insert is optimised for ISO group K — primarily cast iron — with its coating and RK4 chipformer tailored to abrasive wear and short, breaking chips. Can this insert be used for finishing passes? Yes, the combination of a 1.2 mm nose radius and the rhombic 80° geometry supports light finishing and semi‑finishing operations while maintaining surface quality. How does the RK4 chipformer benefit production? The RK4 chipformer promotes controlled short chips in cast‑iron machining, improving chip evacuation and reducing the risk of entanglement in automated setups when using this Walter Tools insert. Is this insert compatible with standard CCMT toolholders? The insert follows the CCMT form factor and is compatible with holders and toolblocks designed for CCMT‑style rhombic 80° inserts; verify holder specifications for thickness and clamping style. What are the main advantages of the Tiger·tec Silver series? Tiger·tec Silver offers enhanced abrasion resistance and consistent edge life under interrupted cuts, making it suitable for demanding cast‑iron applications where wear and chip control are critical. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation.
CCMT120412-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the insert’s geometry for efficient machining of cast iron; the RK4 chipbreaker and Rhombus 80° form promote reliable chip control and consistent surface quality. Order this insert directly via Metav Werkzeuge or consult our technical advisors for machining parameters. CCMT120412-RK4 WKK20S — Boring/turning indexable insert, Tiger‑tec Silver, for cast iron · Walter Tools CCMT120412-RK4 WKK20S is an indexable turning and boring insert designed for productive machining of cast iron components in industrial workshops. Tiger‑tec Silver coating for high wear resistance Optimised for cast iron applications Rhombus 80° form for stable cutting 7° clearance with 1.2 mm corner radius Faster, more consistent cast iron machining through advanced grade technology The WKK20S grade, based on Tiger‑tec Silver technology, is engineered specifically for abrasive cast iron conditions. Thanks to its coated carbide composition, this insert resists abrasive wear and copes well with the short, breaking chips typical of grey and nodular cast irons. As a result, cycle times are reduced and tool change frequency falls, contributing directly to lower operating costs and higher throughput in production environments. The combination of coating and substrate delivers predictable life under continuous machining. Geometry that stabilises the cut and controls chips The insert’s Rhombus 80° form and 7° clearance create a robust cutting edge that reduces vibration during both turning and boring operations. The 1.2 mm corner radius adds edge strength for interrupted cuts and improves surface finish in roughing passes. The RK4 chipbreaker is tuned for fragmenting chips in cast iron, easing evacuation from the cutting zone and minimising rework. These geometric choices translate into fewer rejects and steadier dimensional accuracy when producing turned components. Seamless integration into production workflows and tooling systems With the ISO designation CCMT120412-RK4 WKK20S, the insert fits common toolholders and adapts to a range of boring and turning applications where cast iron is the primary material. The insert’s tolerance class (M) ensures repeatable seating and stable clamping, which supports process reliability on CNC lathes and boring bars. For workshops seeking to scale productivity, this insert offers a practical balance of life, surface quality and ease of use, and it pairs well with standard coolant strategies for cast iron machining. Contact Metav Werkzeuge today to specify cutting data or to arrange sample trials of the Walter Tools CCMT120412-RK4 WKK20S insert for cast iron applications Technical data Article number: CCMT120412-RK4-WKK20S-WALTER Product type: Boring/turning indexable insert Manufacturer: Walter Tools Grade: WKK20S Series: Tiger‑tec Silver Core data Relief angle: 7° Corner radius: 1.2 mm Plate form: Rhombus 80° Plate size: 12 Plate thickness: 04 Special features Chipbreaker: RK4 Coated carbide grade Application: Cast iron ISO designation: CCMT120412-RK4 WKK20S Execution: T Tolerance class: M FAQ What materials is this insert intended for? The CCMT120412-RK4 WKK20S insert by Walter Tools is designed primarily for cast iron machining and is tailored to cope with the abrasive wear and short-chip behaviour typical of those materials. How does the Tiger‑tec Silver coating benefit tool life? The Tiger‑tec Silver coating on the WKK20S grade reduces abrasive wear and improves heat resistance, which extends cutting life and maintains a sharper edge during high-volume cast iron production. Which chipbreaker should be used for interrupted cuts in cast iron? The RK4 chipbreaker integrated in this insert is optimised for fragmenting chips in cast iron and supports reliable chip flow even under interrupted cutting conditions. Is the insert compatible with standard CCMT toolholders? Yes, the ISO designation CCMT120412-RK4 WKK20S matches standard CCMT toolholder interfaces, enabling straightforward replacement and secure clamping in typical turning and boring setups. What geometric features improve surface finish and edge stability? The Rhombus 80° form combined with a 1.2 mm corner radius and 7° clearance delivers edge strength and reduced vibration, contributing to improved surface finish and consistent dimensional results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original, brand-new goods from the manufacturer.
CCMT120412-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a precisely shaped RM4 chipbreaker for reliable chip control and long tool life; ideal for demanding stainless steel turning. Order the insert directly via Metav Werkzeuge or consult the team for application-specific guidance. CCMT120412-RM4 WMP20G turning insert — rhombic 80° geometry, suitable for stainless steel — Walter Tools The CCMT120412-RM4 WMP20G is a rhombic 80° turning insert designed for machining stainless steel in drilling, boring and general turning applications. Tiger·tec Gold coating for process stability WMP20G grade for stainless steel applications Rhombic 80° shape with 1.2 mm corner radius RM4 chipbreaker for controlled chips Consistent chip control for stainless steel machining The Tiger·tec Gold series and the WMP20G grade combine a coated carbide substrate with optimised surface engineering to reduce built-up edge and friction when cutting stainless steel. The result is stable chip formation and fewer interruptions for tool changes, which improves overall machine uptime. The RM4 chipbreaker is engineered to produce short, controllable chips in medium to robust cutting conditions, simplifying chip evacuation in deep grooves and interrupted cuts. Geometry engineered for reliable cutting performance A rhombic 80° insert geometry with a 7° relief angle and 1.2 mm corner radius delivers a balance between edge strength and accessibility. The geometry supports secure cutting in tough, work-hardened stainless steels by spreading cutting forces and reducing the risk of edge chipping. For operations that require both roughing and finishing, the shape and radius offer consistent surface quality while maintaining a robust cutting edge. Productivity and tool-life benefits from coated carbide technology The coated carbide construction of the Tiger·tec Gold family emphasises wear resistance and thermal stability under the high temperatures typical of machining stainless alloys. This leads to longer tool life and fewer indexings. For production environments where process reliability and repeatability matter, the combination of grade and coating provides a measurable reduction in downtime and rework, helping to maintain stable cycle times. For application advice on Walter Tools inserts or to identify the most suitable grade for specific stainless steel grades, contact Metav Werkzeuge — expert consultation and fast availability are on hand. Technical data Article number: CCMT120412-RM4-WMP20G-WALTER Product name: CCMT120412-RM4 WMP20G Manufacturer: Walter Tools Core dimensions and measures Relief angle: 7° Corner radius: 1.2 mm Insert size: 12 Thickness: 04 Geometry: Rhombus 80° Materials, series and special features Series: Tiger·tec Gold Grade: WMP20G Chipbreaker: RM4 Substrate: coated carbide Application: suitable for stainless steel FAQ What materials is this insert designed for? The CCMT120412-RM4 WMP20G insert from Walter Tools is designed primarily for stainless steel machining and performs well in medium to robust cutting conditions. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker produces short, controllable chips that aid evacuation and reduce the risk of entanglement, improving process reliability with the WMP20G grade. Is the Tiger·tec Gold coating suitable for high-temperature cutting? Yes, the Tiger·tec Gold coating on the WMP20G grade is formulated to resist wear and thermal degradation during the elevated temperatures typical of stainless steel cutting. Can this insert be used for both roughing and finishing? With its rhombic 80° geometry and 1.2 mm corner radius, the insert offers a compromise between edge strength and surface quality, making it suitable for combined roughing and finishing tasks. Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are used for clarification only; there is no connection between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
CCMT120412-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Reliable machining of stainless steel is achieved through the combination of the Tiger‑tec Silver coating and the RM4 chipbreaker, which support stable chip formation and prolonged tool life; the CCMT120412-RM4 WMP20S is thus well suited to medium to robust stainless applications. Order the CCMT120412-RM4 WMP20S directly via Metav Werkzeuge or ask our consultants if needed. CCMT120412-RM4 WMP20S — Walter Tools indexable insert, Tiger‑tec Silver, for stainless steel The CCMT120412-RM4 WMP20S is an indexable turning and drilling insert engineered for dependable performance when machining stainless steel in medium to robust operating conditions. Tiger‑tec Silver coating for long tool life Optimised RM4 chipbreaker for stainless steel Rhombic 80° form with 7° relief angle Corner radius 1.2 mm for edge stability Consistent cutting performance for demanding stainless applications The combination of the Tiger‑tec Silver coating and the WMP20S grade delivers reliable wear resistance on stainless materials, counteracting common issues such as built-up edge and thermal softening. The RM4 chipbreaker promotes short, controllable chips, reducing the risk of entanglement in shafts and bores and helping to maintain consistent surface finish. For production environments that prioritise uptime, the coating’s resistance to heat and abrasion contributes directly to longer tool life and fewer indexings, supporting a measurable improvement in process efficiency. Geometry that balances strength and versatility The rhombic 80° plate geometry combined with a 7° relief angle gives a stable cutting orientation that reduces radial forces and improves edge engagement in interrupted cuts. A corner radius of 1.2 mm increases edge strength for tougher contact conditions while the standard CCMT size provides compatibility with common insert holders. The plate’s thickness code and format ensure a secure seat in the toolholder, which reduces vibration and promotes repeatable tool behaviour—advantages that translate into better component tolerances and longer toolholder life. Practical advantages for production and tool management Designed for application to ISO group M (stainless steel), this insert supports parts manufacturers, subcontractors and job shops seeking a cost‑effective route to improved productivity. The coated carbide construction simplifies process planning by offering a versatile grade for a wide range of stainless alloys. With predictable wear characteristics and stable chip control, the insert helps to reduce secondary operations and rework. Compatibility with established Walter tool systems allows straightforward integration into existing tool inventories, shortening the qualification phase and accelerating production ramp‑up. Contact Metav Werkzeuge for tailored advice on integrating Tiger‑tec Silver inserts into production and to arrange supply — info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: CCMT120412-RM4-WMP20S-WALTER Designation: CCMT120412-RM4 WMP20S Grade: WMP20S Series/coating: Tiger‑tec Silver Core dimensions Relief angle: 7° Corner radius: 1.2 mm Insert size: 12 mm Thickness code: 04 Plate form: Rhombus 80° Features Chipbreaker: RM4 Execution: T Material: Coated carbide Application group: ISO M (stainless steel) FAQ What materials is this insert intended for? The CCMT120412-RM4 WMP20S is specified for ISO group M applications and is intended primarily for stainless steel machining. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on the CCMT120412-RM4 WMP20S produces short, controlled chips suitable for safe chip evacuation in turning and reaming operations on stainless steel. Which features improve edge life under heat? The Tiger‑tec Silver coating combined with the WMP20S grade increases heat and wear resistance, resulting in extended durability of the cutting edge. Is the insert compatible with standard CCMT holders? Yes; the CCMT120412-RM4 WMP20S conforms to the CCMT form and is compatible with holders designed for this insert designation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks (Walter Tools) are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CCMT120412-RM4 WSM20S RM4 Wendeplatten - Walter Tools
The combination of a Tiger‑tec Silver coating and an optimised RM4 chipbreaker ensures reliable edge stability and consistent chip control for demanding turning tasks; the clear geometry and 1.2 mm nose radius support reproducible surface quality and long tool life. Order the CCMT120412-RM4 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. CCMT120412-RM4 WSM20S — Rhombic 80° indexable insert, Tiger‑tec Silver (Walter Tools) The CCMT120412-RM4 WSM20S is an indexable insert engineered for turning, drilling/boring applications, and heavy-duty machining of stainless steel and heat‑resistant superalloys in industrial production environments Tiger‑tec Silver coating for high process security Optimised RM4 chipbreaker for stable chip control Rhombic 80° form with 1.2 mm nose radius Suited for stainless steel and superalloys Reliable performance in demanding materials The coated carbide grade WSM20S from the Tiger‑tec Silver family is specifically developed for machining stainless steel and high‑temperature alloys. Its layered coating improves thermal resistance and reduces adhesion at the cutting edge, which leads to stable chip formation and extended edge life. For production planners, this means fewer insert changes and a more predictable tooling cycle; for operators, the improved wear behaviour reduces the likelihood of unexpected regrinds. The material combination S / M indicates suitability for both superalloys and stainless steels, enabling a single insert grade to cover a broader range of workpieces without compromising performance. Stable chip control to reduce cycle interruptions Thanks to the RM4 chipbreaker geometry, the insert delivers controlled chip formation even under interrupted cuts or variable feed conditions. Controlled chips lower the risk of entanglement and protect the workpiece surface, which contributes to fewer machine stops and less manual intervention. In practical terms, this leads to higher machine uptime and a smoother production flow. The chip management properties of the insert are a decisive factor when machining long or complex components where consistent evacuation of swarf is critical. Precision geometry for reproducible surface quality The Rhombic 80° style paired with a 1.2 mm corner radius offers a balance between robustness and finishing capability. The geometry supports reliable edge strength for tougher cutting conditions while still producing consistent surface results on turned parts. The M tolerance class ensures dimensional repeatability when indexing inserts, which simplifies tool set‑up and measurement routines. For engineers focused on quality assurance, these characteristics translate into repeatable part accuracy and reduced scrap rates. Practical integration and cost‑efficiency in production The ISO designation aligns the insert with standard toolholders, enabling fast replacement and interchangeability within existing tooling systems. The compact profile and thickness designation facilitate stocking and sorting; the Tiger‑tec Silver series further improves lifetime performance, which contributes to lower total tooling costs over extended production runs. For additional technical guidance or to confirm suitability for a specific alloy or cycle, Metav Werkzeuge provides expert consultation and detailed cutting data on request — contact via email or telephone for tailored recommendations. Contact Metav Werkzeuge to discuss application‑specific cutting data for the Walter Tools CCMT120412-RM4 WSM20S and to arrange fast supply and technical advice Technical Data Article number: CCMT120412-RM4-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT120412-RM4 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Clearance angle: 7° Corner radius: 1.2 mm Insert size: 12 mm Thickness designation: 04 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade / sort: WSM20S Chipbreaker: RM4 Plate form: Rhombic 80° Material applicability: S / M (superalloys, stainless steel) Designation: CCMT120412-RM4 FAQ What materials is this insert suitable for? The CCMT120412-RM4 WSM20S is designed primarily for stainless steel and heat‑resistant superalloys (material groups S and M), offering wear resistance and edge stability for challenging workpieces. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this insert supports controlled chip formation and evacuation, which reduces interruptions and helps maintain surface quality during turning operations. What is the benefit of the Rhombic 80° geometry? The Rhombic 80° form with a 1.2 mm corner radius combines edge strength and finishing capability, enabling reproducible surface results and reliable edge life under medium to heavy cutting conditions. Is this insert compatible with standard CCMT toolholders? Yes; the ISO designation CCMT120412-RM4 corresponds to standard toolholders for indexable turning inserts, allowing straightforward replacement and integration into existing tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT120412-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Choose the CCMT120412-RM4 WSM30S for productive turning of stainless steels and high‑temperature superalloys; the Tiger‑tec Silver coating and RM4 chipbreaker combine stable cutting‑edge life with reliable chip control — order directly via Metav Werkzeuge or consult our application specialists for tailored machining advice. CCMT120412-RM4 WSM30S — Rhombic 80° indexable insert for stainless steel and superalloys, Tiger‑tec Silver by Walter Tools A robust CCMT120412-RM4 WSM30S indexable insert designed for turning and boring applications in tough, heat‑resistant materials where secure chip formation and edge stability are critical Tiger‑tec Silver coated carbide grade WSM30S RM4 chipbreaker for secure chip control Rhombic 80° form with 1.2 mm corner radius 7° clearance angle for stable cutting High‑temperature performance and broad material range The combination of the Tiger‑tec Silver technology and the WSM30S grade delivers a coating system optimised for heat resistance and stable cutting edge retention. This makes the insert particularly suitable for machining stainless steels and H‑series superalloys, materials that tend to generate heat and cause built‑up edge. The coating reduces thermal loading at the cutting zone, while the carbide base provides the hardness needed for repeatable performance. For operations that demand consistent component quality, the material pairing provides a clear productivity advantage. Precision geometry and secure chip control for reliable production The rhombic 80° geometry with a 1.2 mm corner radius and an axial clearance of 7° ensures robust engagement and edge strength in interrupted or roughing passes. The RM4 chipbreaker is engineered to shape and evacuate chips effectively, reducing rework risk and protecting the workpiece surface. For workshops aiming to reduce cycle time and scrap rates, these geometric choices translate into fewer tool changes and more predictable process windows, especially where variable feed and depth are required. Durable life and consistent surface finish for demanding series The insert thickness and overall design support secure clamping and even force distribution across the cutting edge, which helps maintain surface integrity over longer tool life. Combined with the coated grade, this leads to lower frequency of indexing and improved machine uptime. In practice, that means fewer interruptions in series production and a more cost‑effective process. Where surface finish tolerances are critical, the combination of geometry and coating helps maintain dimensional stability between tool changes. For demanding stainless and superalloy turning, select the Walter Tools Tiger‑tec Silver WSM30S insert — contact Metav Werkzeuge for application recommendations and availability. Technical Data Article number: CCMT120412-RM4-WSM30S-WALTER Designation: CCMT120412-RM4 WSM30S Series: Tiger-tec Silver Manufacturer: Walter Tools Facts Plate form: Rhombus 80° Plate size: 12 Plate thickness: 04 Corner radius: 1,2 Clearance angle: 7° Chipbreaker: RM4 Grade / Sort: WSM30S Tolerance class: M Execution: T Special features Coated carbide grade (Tiger‑tec Silver) Suitable for stainless steels (ISO M) Suitable for heat‑resistant superalloys and titanium (ISO S) Designed for secure chip formation and edge stability Optimised for productive machining with reduced edge wear FAQ What materials is this insert suited for? The CCMT120412-RM4 WSM30S insert is designed for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), reflecting the thermal and mechanical demands of these groups. What does the RM4 chipbreaker do? The RM4 chipbreaker controls chip formation and evacuation to reduce rework and protect the machined surface when using the CCMT120412-RM4 WSM30S indexable insert. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating improves heat resistance and cutting‑edge life, enabling longer runs and greater process stability with the Walter Tools insert. What is the significance of the 1.2 mm corner radius and 80° form? A 1.2 mm corner radius and rhombic 80° form provide robust edge strength and versatility for both roughing and finishing cuts with consistent surface quality. Is this insert suitable for interrupted cuts or heavy engagement? Yes — the geometry and coated grade of the CCMT120412-RM4 WSM30S are configured to withstand interrupted cuts and heavy engagements while maintaining cutting‑edge integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
CCMT120412-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the wear-resistant Tiger‑tec Gold grade with a precise RP4 chipbreaker and an 80° rhombic cutting geometry, this insert delivers productive and repeatable turning of steel parts; order the CCMT120412-RP4 WPP10G directly via Metav Werkzeuge or consult our technical team for application advice. CCMT120412-RP4 WPP10G — Turning and drill/boring indexable insert for steel, Walter Tools The CCMT120412-RP4 WPP10G is a coated carbide indexable insert designed for high-productivity steel machining in turning and light boring operations. Tiger‑tec Gold coated grade WPP10G RP4 chipbreaker for controlled chips 7° clearance for reduced rubbing Rhombic 80° CCMT geometry Boosted productivity for steel turning and boring The combination of the Tiger‑tec Gold coating and the WPP10G grade provides a balance of wear resistance and toughness optimised for steel (P) applications. Coated carbide substrate improves thermal stability during interrupted cuts and high material removal rates, which translates into longer tool life and lower cost per part in series production. This insert is suitable where consistent performance and reduced regrinds are required, helping to maintain cycle times and improve overall shop-floor efficiency. Stable chip control and improved surface integrity The RP4 chipbreaker is engineered to form predictable chips in a wide range of steel grades, reducing the risk of built-up edge and tool damage. Combined with the CCMT 80° rhombic geometry, the insert provides a favourable cutting direction that lessens vibration and supports a steady cutting force. The 1.2 mm corner radius aids in distributing cutting stresses and contributes to a finer surface finish, while the 7° clearance minimises flank rubbing for improved dimensional stability. Robust indexable system for repeatable set-ups With a nominal inscribed circle of 12 mm and a plate thickness of 4 mm, the insert fits common CCMT toolholders and supports quick indexing for uninterrupted machining. The tolerance class M ensures consistent seat fit and repeatability across inserts, reducing set-up time and maintaining machining tolerances over long runs. As part of Walter Tools’ Tiger‑tec Gold family, this coated-carbide insert combines process security with practical handling for manufacturing environments focused on productivity and consistent results. For tailored tooling recommendations and availability of Walter Tools inserts such as the CCMT120412-RP4 WPP10G, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for swift assistance. Technical data Article number: CCMT120412-RP4-WPP10G-WALTER Manufacturer: Walter Tools Designation: CCMT120412-RP4 WPP10G Product type: Drill / boring indexable insert / turning indexable insert Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: RP4 Geometry: Rhombus 80° (CCMT) Execution: T UID: CCMT120412-RP4-WPP10G-WALTER Facts Clearance angle: 7° Corner radius: 1.2 mm Inscribed circle / size: 12 mm Thickness: 4 mm Tolerance class: M Special features Coated carbide grade (Tiger‑tec Gold) Optimised for steel (ISO P group) Stable chip formation with RP4 breaker Suitable for productive turning and light boring Reliable repeatability for series production FAQ What materials is this insert intended for? The CCMT120412-RP4 WPP10G is optimised for steel (ISO P); the WPP10G Tiger‑tec Gold grade balances wear resistance and toughness for a wide range of steel alloys. Which toolholders are compatible with this insert geometry? The rhombic 80° CCMT form is compatible with standard CCMT turning toolholders; the insert’s dimensions (12 mm inscribed circle, 4 mm thickness) match common holders used for steel turning. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker promotes predictable chip formation in steel, reducing built-up edge and improving process stability, which supports consistent surface finish and tool life for the CCMT120412-RP4 WPP10G. Is this insert suitable for interrupted cuts? Yes; the Tiger‑tec Gold coating and the coated-carbide substrate are designed for thermal stability and toughness, making the insert capable of handling interrupted cuts common in turning operations. What is the benefit of the 1.2 mm corner radius? A 1.2 mm corner radius distributes cutting forces over a larger area, reducing edge stress and improving surface integrity while aiding in tool durability during production machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and Walter Tools. The offered item is an original, factory-new product of Walter Tools.
CCMT120412-RP4 WPP20G T Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating, an RP4 chipbreaker and a 7° clearance angle delivers extended tool life and steady machining with fewer interruptions; the insert is optimised for steel (ISO P). Order the CCMT120412-RP4 WPP20G directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT120412-RP4 WPP20G Drilling and Turning Indexable Insert, Tiger·tec Gold, for Steel — Walter Tools The CCMT120412-RP4 WPP20G is a coated carbide indexable insert designed for steel machining in drilling/bore-enlarging and turning operations, delivering robust wear resistance and consistent chip control. Tiger·tec Gold coated carbide for durability Optimised RP4 chipbreaker for steel 7° clearance angle for reliable cutting 1.2 mm corner radius, rhombus 80° geometry Proven cutting performance that extends productive uptime The coated carbide grade Tiger·tec Gold provides a hard-wearing surface that improves edge retention and reduces flank wear under the thermal loads typical when machining steel (ISO P). By combining a modern coating technology with a stable substrate, the insert achieves longer tool life and fewer indexings, which in turn lowers machine downtime and increases parts-per-tool. The manufacturing-focused design prioritises consistent cutting behaviour; operators benefit from predictable wear progression and a usable edge for more finished cycles before replacement. Controlled chips and consistent surface quality for fewer reworks The RP4 chipbreaker is configured to manage the swarf behaviour associated with steel cutting, promoting short, controllable chips that evacuate reliably. Combined with the rhombus 80° geometry and a 1.2 mm corner radius, the insert supports improved surface finishes and dimensional consistency on turned or bored components. The geometry reduces the need for secondary finishing operations in many setups, delivering a measurable improvement in process efficiency and part quality. Compact format and geometry for versatile toolholders Configured as a CCMT-style insert with a 12 size and a 4 mm plate thickness, the format suits a broad range of standard toolholders for both drilling/bore-enlarging and turning tasks. The 7° clearance angle helps maintain cutting stability during entry and side passage, reducing rubbing and heat buildup. Tolerance class M indicates consistent manufacturing precision, which supports reproducible tool offsets and reduces setup variation across repetitive production runs. Operational advantages that support shop-floor demands Using a coated, modern carbide grade reduces total cost of ownership by extending edge life and enabling higher metal removal rates where appropriate. The insert’s combination of geometry and chip control produces steady cutting forces and fewer interruptions for swarf management, which contributes to a smoother production flow. For operations aiming to optimise cycle time and part consistency when machining steel, this insert delivers a straightforward route to improved process security and predictable results. For reliable steel machining, request CCMT120412-RP4 WPP20G inserts from Metav Werkzeuge to benefit from Tiger·tec Gold performance and professional application advice from the Metav team Technical data Article number: CCMT120412-RP4-WPP20G-WALTER SKU: CCMT120412-RP4-WPP20G-WALTER Designation: CCMT120412-RP4 WPP20G Product type: Drilling and turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core technical data Clearance angle: 7° Corner radius: 1.2 mm Inscribed circle / size: 12 mm Thickness: 4 mm Tolerance class: M Chipbreaker: RP4 Materials and special features Coating / grade: WPP20G (Tiger·tec Gold) Substrate: Coated carbide Geometry: Rhombus 80° Application group: Steel (ISO P) Execution: T Plate designation without grade: CCMT120412-RP4 FAQ What materials is this insert intended for? The CCMT120412-RP4 WPP20G is formulated for machining steel (ISO P) and delivers optimised performance across common unalloyed and alloyed steel grades. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on the WPP20G grade promotes short, controllable chips during steel machining, improving swarf evacuation and reducing the risk of re-cutting chips. Which geometry and dimensions apply to this insert? The insert features a rhombus 80° geometry, a 1.2 mm corner radius, a 12 mm inscribed circle and a 4 mm thickness, offering compatibility with standard CCMT toolholders. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance and edge life under thermal loads, enabling more consistent cutting and longer intervals between indexing or replacement. Is this insert suitable for both drilling and turning operations? Yes, the design of the CCMT120412-RP4 WPP20G supports drilling/bore-enlarging and turning applications where steel is being machined. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original factory-new product from Walter Tools.
CCMT120412-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust RP4 chipbreaker and a stable 1.2 mm corner radius for consistent, economical steel turning; order through Metav Werkzeuge or consult our specialists for application-specific cutting data CCMT120412-RP4 WPP30G turning/boring indexable insert by Walter Tools — Tiger·tec Gold, for steel (P) The CCMT120412-RP4 WPP30G is an indexable turning and boring insert designed for productive steel machining, combining a Tiger·tec Gold coated grade with an RP4 chipbreaker for stable chip control and predictable tool life Tiger·tec Gold coated carbide grade WPP30G Rhombic 80° form for versatile turning RP4 chipbreaker optimised for steel machining 7° relief and 1.2 mm corner radius for stability Productive steel turning with optimised process security The combination of the Tiger·tec Gold coating and the coated carbide grade WPP30G delivers high process reliability when machining steel (material group P). The advanced coating improves wear resistance and thermal stability, which translates into longer tool life and fewer insert changes during batch production. The RP4 chipbreaker is engineered to provide consistent chip formation under typical steel cutting conditions, reducing interruptions and minimising manual chip handling. This focus on efficiency supports a measurable improvement in machining throughput and reduces cost per component without sacrificing surface quality. Predictable surface finish and robust cutting edge A 1.2 mm corner radius contributes to a stable cutting edge that tolerates variable cutting parameters while maintaining a good surface finish. The insert’s Rhombic 80° geometry provides effective cutting engagement and flexibility across shoulder and profile turning tasks, reducing the need for multiple specialised grades. The specification tolerance class M ensures consistent dimensional accuracy of the inserts, aiding repeatability across tool changes and simplifying process planning. Together, these characteristics support reliable part quality and reduce secondary operations. Seamless integration into ISO tool systems and easy grade selection The ISO designation CCMT120412-RP4 WPP30G fits common toolholders and turning systems, enabling quick replacement and minimal setup time. Size and thickness designations are compatible with established insert holders, making the grade straightforward to introduce into existing production lines. As a turning/boring indexable insert for steel, the component is suitable for a wide range of general turning operations where a balance of wear resistance and toughness is required. For specific cutting data or to match the insert to a particular turning cycle, Metav Werkzeuge’s technical advisors can provide tailored recommendations. Contact Metav Werkzeuge for application-specific cutting data, availability and selection support — Metav Werkzeuge provides technical consultation and rapid delivery options Technical data Article number: CCMT120412-RP4-WPP30G-WALTER ISO designation: CCMT120412-RP4 WPP30G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Material group: Steel (P) Facts Insert size: 12 Thickness designation: 04 Corner radius: 1.2 mm Relief angle: 7° Insert form: Rhombic 80° Special features RP4 chipbreaker Coated carbide (Tiger·tec Gold technology) Suitable for turning and boring applications Tolerance class M Designed for steel machining (group P) FAQ What materials is this insert suitable for? The insert is designed for machining steel (material group P); the Walter Tools grade WPP30G and Tiger·tec Gold coating are optimised for common unalloyed and alloyed steels. How does the RP4 chipbreaker affect performance? The RP4 chipbreaker promotes stable chip formation in steel cutting, improving process reliability and reducing interruptions during turning and boring operations. What does the 1.2 mm corner radius mean for component quality? A 1.2 mm corner radius provides a robust cutting edge that improves surface finish consistency and tolerates slight variations in cutting conditions without premature edge failure. Is the insert compatible with standard toolholders? Yes, the ISO designation CCMT120412-RP4 facilitates compatibility with common insert holders used for turning and boring operations. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating increases wear resistance and thermal stability, extending tool life during longer runs and enhancing overall process economy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
CCMT160508-MP6 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold WPP20G coating and an MP6 chipbreaker on the CCMT160508‑MP6 geometry to achieve productive, wear‑resistant turning of Stahl with consistent surface finish; order the CCMT160508‑MP6 WPP20G turning insert directly via Metav Werkzeuge or request application advice from the consultants. CCMT160508‑MP6 WPP20G – Turning insert with Tiger·tec Gold coating and MP6 chipbreaker | Walter Tools The CCMT160508‑MP6 WPP20G is an indexable turning insert engineered for machining Stahl, combining a rhombic 80° form with a 0.8 mm corner radius and 7° clearance for medium finishing and versatile general turning applications. Tiger·tec Gold coated grade WPP20G MP6 chipbreaker for stable chip control Rhombic 80° CCMT geometry, 0.8 mm radius 7° clearance for reliable cutting performance Productive, wear‑resistant cutting for Stahl applications The Tiger·tec Gold WPP20G grade is a coated carbide developed for the thermal and chip‑formation demands of Stahl machining (ISO group P). On the CCMT16 geometry the coating and substrate combine to extend tool life and reduce flank wear under typical turning conditions. With the integrated MP6 chipbreaker, the insert delivers stable chip control across a range of feeds, which supports uninterrupted machining and fewer secondary operations. For process engineers this translates into higher productivity and predictable tool‑change intervals, easing planning and reducing downtime. Geometry that balances edge strength and surface quality The rhombic 80° form of the CCMT insert offers a robust cutting edge suitable for general turning and shoulder cuts, while the 0.8 mm corner radius contributes to improved surface finish without sacrificing edge stability. The 7° clearance angle reduces rubbing on the flank, lowering heat build‑up and further protecting the cutting edge during sustained cuts. These geometric choices make the insert well suited to applications that demand a compromise between long tool life and good component finish, such as medium finishing of shafts and general external turning of unalloyed and alloyed Stahls. Process reliability and recommended use cases Designed around the ISO P designation, this insert is optimised for Stahl including both unalloyed and alloyed varieties where typical heating and chip‑forms occur. The combination of coating, substrate and chipbreaker supports a wide range of cutting speeds and feed rates appropriate for productive turning operations. Where consistent performance is required for batch production or when switching between similar Stahl grades, the WPP20G grade provides repeatable results and good edge stability. Selecting suitable cutting data and coolant strategy will further enhance life‑cycle cost efficiency and surface integrity. Compatibility, handling and performance considerations The CCMT geometry (designation CCMT160508‑MP6) fits common toolholders for indexable turning and is straightforward to clamp and index during service. The MP6 chipbreaker helps avoid long, stringy chips and reduces the risk of workpiece or toolholder interference, supporting safer machining. For workshop planning, the insert’s robust design and coated surface reduce the frequency of replacements, improving overall throughput. When integrating this insert into a turning process, attention to toolholder rigidity and correct seat cleanliness will maximise the benefits of the grade and geometry. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools inserts and assistance specifying CCMT160508‑MP6 WPP20G for Stahl turning tasks Technical data Article number: CCMT160508‑MP6‑WPP20G‑WALTER Designation: CCMT160508‑MP6 WPP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 16 Thickness code: 05 Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold) Chipbreaker: MP6 Coated carbide insert Application group: ISO P (Stahl) Series: Tiger·tec Gold Geometry code: CCMT160508‑MP6 FAQ What materials is this insert intended for? The CCMT160508‑MP6 WPP20G insert is designed primarily for machining Stahl according to ISO P, including unalloyed and alloyed steels. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker on the CCMT geometry promotes controlled chip formation and reduced risk of long, stringy chips, improving process stability and safety during turning. Is the WPP20G grade suitable for high‑speed turning? WPP20G’s Tiger·tec Gold coating is formulated to handle the heat and chip characteristics of Stahl; appropriate cutting data should be chosen for higher speeds to balance wear and productivity. Which toolholders are compatible with this insert designation? The CCMT160508‑MP6 insert fits standard toolholders designed for CCMT‑style rhombic 80° inserts; correct clamping and seat cleanliness are recommended to ensure repeatable performance. Can this insert be used for finishing as well as roughing? With its 0.8 mm corner radius and robust geometry, the insert is suitable for medium finishing and general turning; for fine finishing a smaller radius or different grade might be considered. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT160508-MP6 WPP30G Wendeplatten - Walter Tools
Benefit from stable chip formation and extended tool life thanks to the Tiger‑tec Gold coated WPP30G grade and the MP6 chipbreaker; combine high process reliability with efficient steel turning and order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. CCMT160508-MP6 WPP30G turning insert — Tiger‑tec Gold grade, for steel (Walter Tools) A CCMT160508-MP6 WPP30G turning insert engineered for reliable steel machining, offering optimised wear resistance and consistent chip control in production environments. CCMT160508-MP6 WPP30G by Walter Tools Tiger‑tec Gold coated carbide grade MP6 chipbreaker for stable chips Rhombic 80° form, 0.8 mm corner radius Consistent chip control for uninterrupted cutting cycles The rhombic 80° geometry combined with the MP6 chipbreaker delivers reproducible chip control that reduces risk of built-up edge and machine downtime. The insert’s geometry and the chipbreaker design help direct chips away from the cutting zone, improving surface finish and minimising cycle interruptions. For series production where reproducibility and short cycle times are critical, this combination supports a predictable machining rhythm and reduces secondary operations such as chip clearing. Optimised grade for steel applications and longer tool life The WPP30G grade from the Tiger‑tec Gold family is a coated carbide formulation tailored to the thermal and mechanical conditions of steel turning (ISO P). Its coating enhances wear resistance and heat management, which translates into longer edge life under medium to high cutting speeds. The result is fewer insert changes per shift and improved overall productivity in mixed-steel batches. The grade balances toughness and wear resistance, making it suitable for a range of typical steel operations from finishing to medium machining. Geometry and clearance that support reliable performance With a clearance angle of 7° and a 0.8 mm corner radius, the insert offers a stable cutting edge that combines strength with a good surface finish. The nominal size 16 form provides a compact yet robust contact area, allowing consistent engagement at diverse depths of cut. The geometry reduces the risk of edge chipping in interrupted cuts and supports accurate dimensional control across long runs, which is particularly valuable in component manufacturing where repeatability is essential. For practical advice on integrating the Walter Tools Tiger‑tec Gold CCMT160508-MP6 WPP30G insert into existing turning processes, contact Metav Werkzeuge for technical consultation and availability information. Technical Data SKU: CCMT160508-MP6-WPP30G-WALTER Designation: CCMT160508-MP6 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Free angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 16 Thickness: 05 Tolerance class: M Special features Chipbreaker: MP6 Coating/grade: WPP30G (Tiger‑tec Gold) Material application: steel (ISO P) Product type: turning insert (indexable insert) Base material: coated carbide FAQ What materials is this insert suited for? The CCMT160508-MP6 WPP30G insert is designed primarily for machining steel (ISO P), utilising the Tiger‑tec Gold coated carbide to manage heat and wear in steel turning applications. How does the MP6 chipbreaker affect production? The MP6 chipbreaker on this insert promotes stable chip formation, which helps maintain uninterrupted production cycles and improves surface finish on turned parts. What advantage does the Tiger‑tec Gold coating offer? Tiger‑tec Gold coating improves wear resistance and thermal stability, extending cutting edge life and supporting higher cutting speeds compared with uncoated grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
CCMW060202-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and a form that supports productive cast-iron turning; order the insert directly via Metav Werkzeuge or request tailored cutting data from the technical team. CCMW060202-RK6 WKK20S – Turning insert for cast iron, Tiger·tec Silver (Walter Tools) The CCMW060202-RK6 WKK20S is a rhombic 80° indexable insert designed for productive external turning of cast-iron materials in industrial machining. Tiger·tec Silver coated grade WKK20S Optimised for cast-iron turning RK6 chipbreaker for controlled chips Rhombic 80° form with 0.2 mm radius Productivity and process stability for cast-iron operations The insert is built on the Tiger·tec Silver coating platform and the WKK20S grade, a combination tuned for the abrasive wear and typically short, brittle chips of cast-iron machining. This configuration delivers longer edge life and predictable wear behaviour, which supports higher productivity and fewer indexings per component. The specification emphasises repeatable performance under interrupted cuts and heavy cross-sections, making the insert a practical choice where consistent cycle times and low tool-change frequency are priorities. The coated carbide substrate reduces adhesive and abrasive degradation, improving tool life in demanding grey and nodular cast-iron applications. Controlled chips and surface quality with engineered geometry The integrated RK6 chipbreaker provides defined chip formation and evacuation, reducing the risk of built-up edge and improving machining security on interrupted profiles. The insert geometry – a rhombic 80° shape with a 0.2 mm corner radius and a 7° clearance angle – balances cutting-edge strength and surface finish: the small radius improves dimensional control, while the relief angle aids tool engagement in tight contours. For clarification, a chipbreaker shapes the chip to avoid long, stringy swarf; this is particularly relevant when turning cast iron, where short, fragmented chips are desirable to protect workpiece and toolclamping systems. Practical integration into workshop toolrooms Marked as size code 06 and thickness code 02, the insert follows established form factors and fits common external turning holders designed for rhombic inserts. The designation on the insert allows quick identification in tool management systems and facilitates spare-part planning. While cutting parameters vary with machine rigidity and alloy, the combination of coated grade and RK6 geometry generally enables stable feeds and depths in standard roughing and finishing operations. For exact speed and feed recommendations, the technical specialists at Metav Werkzeuge can supply tailored process data matched to the lathe, holder and workpiece composition. Why this insert improves job-shop efficiency Choosing this grade and geometry supports a cost-effective machining strategy through fewer tool changes and predictable performance, which reduces downtime and scrap risk. The insert’s attributes favour shops that require a robust, repeatable solution for cast-iron turning and who prioritise throughput without sacrificing surface quality. For newcomers to indexable tooling, the construction simplifies inventory: a single grade covers a broad range of cast-iron tasks while delivering stable chip formation and good resistance to abrasive wear. Contact Metav Werkzeuge to request availability, cutting data and recommended holder combinations for the Walter Tools CCMW060202-RK6 WKK20S turning insert Technical data Article number: CCMW060202-RK6-WKK20S-WALTER Product type: Turning indexable insert Manufacturer: Walter Tools WPL designation: CCMW060202-RK6 WKK20S Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness code: 02 Tolerance class: M Designs / Special features Grade series: Tiger·tec Silver Grade/sort: WKK20S Chipbreaker: RK6 Execution: W Material code: K Suitable for: Cast iron FAQ What workpiece materials is this insert intended for? The CCMW060202-RK6 WKK20S insert is specified for machining cast iron; the WKK20S grade is tailored to withstand abrasive wear common with cast-iron alloys. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker produces short, controlled chips that improve swarf evacuation and reduce the risk of chip entanglement during cast-iron turning with this Walter Tools insert. Can the insert be used for finishing as well as roughing? Yes; the combination of the WKK20S grade and a 0.2 mm corner radius allows for both productive roughing and controlled finishing passes, depending on cut parameters. What does the Tiger·tec Silver coating deliver in practice? The Tiger·tec Silver coating increases wear resistance and thermal stability, which translates to longer edge life and more consistent machining performance on abrasive cast-iron materials. Is the insert compatible with common holders for rhombic 80° inserts? The insert follows standard rhombic 80° form factors (size code 06), so it is compatible with holders designed for that geometry; verify clamping and seating with the chosen holder. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. There is no affiliation between our company and the named manufacturers. The offered article is original, brand-new goods from the stated manufacturer.
CCMW060204-RK6 WKK10S Wendeplatten - Walter Tools
High wear resistance and optimised chip control deliver stable, repeatable performance in abrasive cast-iron turning; the Rhombus 80° geometry with a 0.4 mm nose radius provides accurate profile generation and long edge life. Order the CCMW060204-RK6 WKK10S turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMW060204-RK6 WKK10S turning insert, Tiger‑tec Silver for cast iron, Walter Tools A CCMW060204-RK6 WKK10S indexable turning insert engineered for efficient, high‑process‑security machining of cast iron components. Tiger‑tec Silver coating for wear resistance Optimised RK6 chipbreaker for brittle cast iron Rhombus 80° insert with 7° clearance Consistent edge life and process security Reliable chip control for abrasive cast‑iron turning The combination of the RK6 chipbreaker and the WKK10S grade, part of the Tiger‑tec Silver series, is tailored to the short, brittle chips typical of cast iron. This design reduces built-up edge formation and lowers the risk of vibration, resulting in a steadier cut and improved surface quality. The insert’s geometry channels chips reliably away from the cutting zone, which supports continuous operation and reduces unplanned downtime — a clear operational benefit for batch production and series turning. Coating and geometry that extend tool life A hard, wear-resistant coating combined with a coated carbide substrate increases resistance to abrasive wear common in cast-iron machining. The Rhombus 80° shape provides a robust cutting edge, while the 0.4 mm nose radius enables precise profile turning with predictable tool deflection. The 7° clearance supports positive cutting action and helps maintain dimensional stability, so consistent part tolerances are more easily achieved across long runs. Designed for integration into productive workflows The insert format is compatible with standard clamping systems for turning tools, facilitating quick index changes and minimal machine downtime. Its tolerance class M ensures repeatable seating and stable cutting conditions; the insert thickness and chipbreaker combination favour predictable tool life planning and inventory management. For process planners, the result is improved machining throughput and simplified tooling consolidation on the shop floor. Contact Metav Werkzeuge for application advice and current availability of Walter Tools Tiger‑tec Silver inserts by phone at +49 2822 7131930 or via email at info@metav-werkzeuge.com Technical data Article number: CCMW060204-RK6-WKK10S-WALTER SKU: CCMW060204-RK6-WKK10S-WALTER Designation: CCMW060204-RK6 WKK10S Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Designs / Special features Series: Tiger‑tec Silver Grade: WKK10S (coated carbide) Chipbreaker: RK6 Applicable material group: cast iron (K) Tolerance class: M Execution: W FAQ What materials is this insert intended for? The CCMW060204-RK6 WKK10S insert is intended primarily for machining cast iron; the WKK10S grade and RK6 chipbreaker are optimised for abrasive, short‑breaking chips typical of Gusseisen. How does the RK6 chipbreaker affect surface finish? The RK6 chipbreaker promotes controlled chip formation and evacuation, which helps to reduce vibrations and contributes to improved surface quality on cast‑iron components when the cutting data are set appropriately. Can the insert be used for interrupted cuts or roughing operations? The robust Rhombus 80° geometry and coated carbide grade provide good mechanical strength for demanding cuts; however, cutting parameters should be adapted to the specific machine and workpiece conditions to balance tool life and productivity. What is the benefit of the Tiger‑tec Silver coating? The Tiger‑tec Silver coating on the WKK10S grade increases resistance to abrasive wear and extends edge life, which helps to maintain consistent performance across longer production runs. Is the insert available as part of a tool system for quick reindexing? The CCMW060204-RK6 format matches common indexable insert holders used in turning applications, enabling quick indexing and reduced machine downtime when standard toolholders are employed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product from Walter Tools.
CCMW060204-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of a robust combination of reliable Tiger‑tec Silver coating and a dedicated RK6 chipbreaker for efficient cast iron machining; the result is consistent performance and long tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCMW060204-RK6 WKK20S indexable turning insert, Tiger‑tec Silver, for cast iron — Walter Tools CCMW060204-RK6 WKK20S is an indexable turning insert designed for productive finishing and medium-duty turning of cast iron, offering controlled chip formation and stable wear resistance. Optimised for cast iron machining Tiger‑tec Silver coated grade WKK20S Rhombic 80° form, 0.4 mm corner radius Reliable chip control with RK6 chipbreaker Consistent cast iron performance for stable production The combination of a coated carbide grade and a purpose-built RK6 chipbreaker provides measurable advantages when machining cast iron. The coating technology delivers improved resistance to abrasive wear, while the chipbreaker shapes short, breakable chips that reduce re-cutting and improve surface finish. For production environments this means fewer interruptions, more predictable tool life and reduced scrap rates. The result is a cost‑efficient cutting process that supports steady throughput in turning operations. Precise geometry that improves cutting stability A rhombic 80° insert shape with a 0.4 mm corner radius and a 7° relief angle gives a balance between cutting strength and accessibility into profiles. The geometry supports steady cutting forces, which reduces vibration and helps maintain dimensional accuracy on turned components. The moderate corner radius is suited to light radii and finishing passes, while the 80° form provides positive engagement for stable chip formation and good toolholder compatibility. Coating and grade benefits explained for practical use The Tiger‑tec Silver coating applied to the WKK20S grade is a multi‑layer, wear‑resistant system optimised for abrasive cast iron applications. Coated carbide inserts like this one combine a tough substrate with a protective surface layer that delays flank and crater wear. In practice, this translates to longer intervals between indexings or insert changes and more consistent part quality. The WKK20S grade is tailored to the demands of nodular and grey cast irons, where short, brittle chips and abrasive particles challenge tool life. Application guidance and integration into workflows The insert is suitable for medium‑to‑high productivity turning of cast iron components in both single‑piece and batch production. Use the RK6 chipbreaker for general finishing to semi‑roughing operations where controlled, segmented chips are needed to avoid long, stringy chips. Matching the insert with a rigid toolholder and stable clamping reduces the risk of chattering and improves repeatability. For detailed application parameters or to verify compatibility with specific toolholders and machines, Metav Werkzeuge provides expert consultation and cutting data to adapt feed and speed to the machining scenario. Discuss Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge to define the optimal grade and chipbreaker for specific cast iron operations; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical Data Article number: CCMW060204-RK6-WKK20S-WALTER Product label: Drehwendeschneidplatte CCMW060204-RK6 WKK20S Walter Tools Product type: Indexable turning insert Grade/series: Tiger‑tec Silver, WKK20S Chipbreaker: RK6 Shape: Rhombic 80° Relief angle: 7° Corner radius: 0.4 Size code: 06 Thickness code: 02 Tolerance class: M Manufacturer: Walter Tools Core measurements Relief angle: 7° Corner radius: 0.4 mm Shape angle: 80° Size code: 06 Thickness code: 02 Special features Coating technology: Tiger‑tec Silver Designed for: cast iron machining Material designation: K (cast iron) Chip control: RK6 chipbreaker Application focus: finishing to medium roughing on cast iron FAQ What materials is this insert intended for? The CCMW060204‑RK6 WKK20S insert is designed primarily for cast iron applications; the WKK20S grade and the RK6 chipbreaker are optimised for abrasive, short‑chip behaviour typical of cast iron. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WKK20S grade increases wear resistance and thermal stability during extended cutting, which helps to maintain consistent tool life and surface quality on cast iron components. Which geometry features support finishing operations? The rhombic 80° form in combination with a 0.4 mm corner radius and a 7° relief angle gives the insert a positive engagement suited to finishing passes while preserving dimensional stability. Is the RK6 chipbreaker suitable for semi‑roughing? Yes; the RK6 chipbreaker balances chip control with reliable cutting for finishing and some semi‑roughing conditions, improving safety and reducing chip‑related interruptions. Can this insert be used in standard toolholders for turning? The insert’s 80° rhombic form and size code 06 are compatible with standard indexable turning toolholders configured for this insert shape; confirm holder seating and clamping specifications before use. The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned solely for identification purposes; there is no affiliation between our company and the listed brands. The offered article is original, factory‑new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMW060208-RK6 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance and reliable chip control for consistent cast iron machining; the robust WKK10S grade and RK6 chipbreaker reduce downtime and support stable process results. Order directly via Metav Werkzeuge or consult our specialists for application guidance. CCMW060208-RK6 WKK10S — Turning insert for cast iron, rhombic 80° (Walter Tools) A CCMW060208-RK6 WKK10S is a rhombic 80° indexable turning insert engineered for productive machining of cast iron components. Tiger·tec Silver coating for wear resistance Optimised RK6 chipbreaker for cast iron Rhombic 80° geometry for versatile turning 0.8 mm corner radius for reliable edge strength Higher productivity through a wear‑resistant coating The combination of the Tiger·tec Silver coating and the WKK10S carbide grade delivers improved resistance to abrasive wear typical in cast iron applications. This results in longer intervals between indexings and fewer unscheduled tool changes, which directly improves machining throughput. The coated substrate provides a predictable gradual wear pattern, allowing process engineers to plan tool life economically and maintain consistent production rates. Reliable chip control and stable cutting behaviour Equipped with the RK6 chipbreaker, the insert produces short, manageable chips when turning grey or nodular cast iron, lowering the risk of entanglement and surface damage. The chip control system is optimised for the brittle, breaking chip forms encountered with cast iron (ISO group K), reducing machine downtime and improving operator safety. The controlled chip formation also supports a steadier cutting force, which contributes to a reproducible surface quality. Consistent surface finish with robust edge geometry The rhombic 80° geometry paired with a 0.8 mm corner radius provides a balance between edge strength and surface integrity. This geometry suits a wide range of turning tasks, from general finishing to medium-duty material removal, while maintaining edge stability under intermittent cuts. The tolerance class M ensures dimensional interchangeability across toolholders that accept this insert shape, simplifying tool management and replacement routines. Application guidance and material focus This indexable insert is specifically tuned for machining cast iron; the grade and chipbreaker address the abrasive wear and short, breaking chips typical of those materials. For practical deployment, the insert performs best in operations where reliable chip control, predictable tool life and consistent surface results are priorities. For further advice on cutting data, holder selection or process optimisation, technical consultants are available to support integration into existing turning centres. Contact Metav Werkzeuge for tailored recommendations on integrating Tiger·tec Silver turning inserts into production or to request application-specific data at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data SKU: CCMW060208-RK6-WKK10S-WALTER Designation: CCMW060208-RK6 WKK10S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 06 Thickness: 02 Relief angle: 7° Corner radius: 0.8 mm Geometry: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: RK6 Suitable for: cast iron (ISO group K) Series: Tiger-tec Silver FAQ What materials is this insert designed for? The CCMW060208-RK6 WKK10S insert is intended for machining cast iron; the WKK10S grade and RK6 chipbreaker are tuned to handle the abrasive wear and short, breaking chips typical of ISO group K materials. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker promotes short, controllable chips when machining cast iron, which helps maintain surface quality and reduces the chance of chip-related interruptions during turning operations. Which cutting tasks suit the rhombic 80° geometry and 0.8 mm radius? The rhombic 80° form with a 0.8 mm corner radius offers a compromise between edge strength and surface finish, making it well suited to general purpose turning, medium stock removal and finishing in cast iron applications. Is the insert compatible across standard toolholders? The CCMW060208-RK6 WKK10S is manufactured to tolerance class M, allowing interchangeability with holders designed for this standard insert designation and simplifying tool replacement in production settings. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and delivers a consistent wearing behaviour under the abrasive conditions of cast iron machining, contributing to longer tool life and more predictable process control. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. They are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
CCMW060208-RK6 WKK20S RK6 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and the RK6 chipbreaker for reliable cast iron turning; reliable chip control and extended edge life support uninterrupted production. Order directly via Metav Werkzeuge or contact the technical consultants for application-specific guidance. CCMW060208-RK6 WKK20S turning indexable insert — Tiger·tec Silver, rhombic 80°, 7° clearance (Walter Tools) CCMW060208-RK6 WKK20S is a turning indexable insert engineered for efficient machining of cast iron components, combining a Tiger·tec Silver coating with an RK6 chipbreaker for stable chip formation and extended tool life. Tiger·tec Silver for high wear resistance RK6 chipbreaker optimised for cast iron Rhombic 80° form with 0.8 mm corner radius Maximised productivity on cast iron components The Tiger·tec Silver coated coated carbide substrate delivers high wear resistance specifically for abrasive grey and nodular cast irons (ISO group K). The RK6 chipbreaker, tuned to the typical short, brittle chips of cast iron, reduces the risk of chip-related interruptions and lowers the frequency of manual chip disposal. With a 0.8 mm corner radius and 7° clearance angle, the insert balances edge strength and cutting precision, meaning fewer tool changes and steadier cycle times — a direct contribution to higher machine availability and predictable throughput. Consistent edge life and predictable surface results Thanks to the advanced coating technology of the Tiger·tec Silver grade and the robust carbide base, the insert offers consistent edge life under demanding abrasive conditions. This stability translates to more uniform surface finishes and repeatable components across batches. The coated grade is designed to withstand the mechanical and thermal stresses common in heavy interrupted cuts on cast iron, which increases confidence in process parameters and simplifies tool-life planning for production managers. Simple integration and reliable process planning The CCMW designation denotes a rhombic 80° insert in size 06 with a thickness code 02, permitting straightforward replacement in compatible standard turning toolholders. The M tolerance class ensures dimensional consistency for serial production, aiding quick set-up and interchangeability. These geometric and tolerance attributes support reliable clamping, steady cutting angles and controlled chip flow, helping workshops maintain consistent part quality while keeping inventory management efficient. Discuss specific machining tasks with Metav Werkzeuge to select the right Walter Tools insert for cast iron applications and to secure Tiger·tec Silver performance — contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMW060208-RK6-WKK20S-WALTER Name: turning indexable insert CCMW060208-RK6 WKK20S Manufacturer: Walter Tools Facts Plate size: 06 Plate thickness code: 02 Corner radius: 0.8 mm Clearance angle: 7° Plate form: rhombic 80° Chipbreaker: RK6 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S Coating: coated carbide Material group suitability: cast iron (K) Execution: W FAQ What materials is this insert designed for? The CCMW060208-RK6 WKK20S insert by Walter Tools is formulated for machining cast iron (ISO group K), providing abrasion-resistant performance on grey and nodular cast irons. How does the RK6 chipbreaker benefit machining? The RK6 chipbreaker on the CCMW060208-RK6 WKK20S promotes controlled, short chip formation suited to cast iron, reducing downtime from chip handling and improving cycle reliability. What does the Tiger·tec Silver coating offer in practice? Tiger·tec Silver on this Walter Tools insert increases wear resistance and thermal stability, resulting in longer edge life and more consistent surface quality during extended production runs. Is the geometry suitable for finishing or roughing operations? With a 0.8 mm corner radius and rhombic 80° form, the insert provides a compromise of edge strength and accessibility that suits a range of turning tasks from medium finishing to general-purpose turning in cast iron. Which toolholders are compatible with this insert designation? The CCMW form factor (rhombic 80°) and size 06 are compatible with standard toolholders designed for CCMW inserts; the M tolerance class supports repeatable seating and stable cutting performance. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMW09T304-RK6 WKK10S Wendeplatten - Walter Tools
Take advantage of the proven combination of a wear-resistant coating and a geometry optimised for cast-iron machining to increase uptime and reduce insert changes. The reliable WKK10S grade and RK6 chipbreaker deliver consistent chip control and extended edge life — order via Metav Werkzeuge or request advice from their specialists. CCMW09T304-RK6 WKK10S – indexable turning insert for cast iron, 0.4 mm radius, Tiger‑tec Silver by Walter Tools The CCMW09T304-RK6 WKK10S is an indexable turning insert from the Tiger‑tec Silver family, engineered for robust and efficient machining of cast iron components in demanding production environments. Tiger‑tec Silver coating for durable edge Optimised RK6 chipbreaker for cast iron Rhombic 80° form with 0.4 mm radius 7° relief angle for consistent cutting Longer tool life through advanced coating technology The Tiger‑tec Silver coating together with the WKK10S substrate provides enhanced abrasion resistance specifically tailored to the short, brittle chips and abrasive wear typical of cast iron. This coated carbide grade reduces flank wear and extends the interval between indexings, supporting higher component throughput and lower tool consumption. The result is a measurable improvement in process economy and predictable tool life under continuous production. Controlled chip formation and improved surface quality The RK6 chipbreaker and rhombic 80° geometry are configured to promote reliable chip breaking and evacuation when machining cast iron grades. The 0.4 mm corner radius and 7° relief angle moderate cutting forces and reduce vibration, which contributes to a more stable cutting edge and improved workpiece finish. These geometric features are particularly beneficial where consistent chip control shortens cycle times and reduces secondary cleaning effort. Designed for consistent production performance Manufactured to tolerance class M and a standard plate thickness of T3, this insert offers stable mounting and repeatable positioning in suitable toolholders. Its ISO designation reflects compatibility with established insert pockets, enabling straightforward integration into existing turning operations. The combination of grade, coating and geometry supports a broad cast-iron coverage, making the insert a practical choice for mixed-series production runs where process reliability is essential. Practical integration and handling in the workshop The insert is supplied in the common CCMW09T304 form factor and is suitable for indexed use, reducing downtime for tool changes. The clear geometry specification simplifies tool selection and tooling inventory management. For applications requiring tailored feed or depth-of-cut adjustments, the insert’s predictable wear behaviour under the Tiger‑tec Silver system supports process planning and minimises unexpected stoppages, helping to maintain steady production flow. Choose Walter Tools Tiger‑tec Silver inserts for proven cast‑iron performance and contact Metav Werkzeuge for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMW09T304-RK6-WKK10S-WALTER Article designation: CCMW09T304-RK6 WKK10S Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WKK10S Manufacturer: Walter Tools Key dimensions & values Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Materials & special features Coating: Tiger‑tec Silver Substrate: Coated carbide Chipbreaker: RK6 Application: Cast iron (ISO 513) Intended for abrasive wear and short, breaking chips FAQ Which materials is this insert intended for? This insert is intended primarily for machining cast iron; the WKK10S grade and Tiger‑tec Silver coating are optimised for abrasive wear and the short, brittle chips typical of cast iron. What cutting geometry features ensure good chip control? The RK6 chipbreaker, rhombic 80° form and 0.4 mm corner radius work together to promote controlled chip breaking and consistent evacuation during cast‑iron turning. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating on the WKK10S grade increases abrasion resistance and helps maintain a stable cutting edge, which extends the effective tool life in production. Is this insert compatible with standard CCMW09 toolholders? The designation CCMW09T304 indicates compatibility with standard toolholders that accept CCMW09 form inserts, enabling straightforward integration into existing setups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision metal‑cutting tools and forms part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original factory‑new product of the manufacturer.
CCMW09T304-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKK20S grade for reliable, wear-resistant cast iron machining; the RK6 chipbreaker and rhombus 80° geometry provide consistent chip control and good surface finish. Order directly via Metav Werkzeuge or consult our technical team for toolholder matching and process optimisation. CCMW09T304-RK6 WKK20S indexable insert for cast iron machining – Walter Tools A CCMW09T304-RK6 WKK20S rhombic 80° indexable insert engineered for efficient machining of cast iron, combining a Tiger·tec Silver coating with an RK6 chipbreaker for reliable chip control. Tiger·tec Silver coating for high wear resistance WKK20S grade optimised for cast iron machining RK6 chipbreaker for short, controlled chips Rhombus 80° shape with 0.4 mm corner radius Higher productivity through optimised coating and grade The coated cemented carbide of the WKK20S grade, built on Walter Tools' Tiger·tec Silver technology, is designed to withstand the abrasive wear typical of cast iron. The result is a longer cutting edge life and fewer index changes, which translates directly into improved machine uptime and lower tooling costs per component. The RK6 chipbreaker stabilises chip formation in interrupted and continuous cuts, contributing to repeatable process windows and a consistent surface finish. Reliable chip control and better surface quality The combination of the RK6 chipbreaker and the rhombic 80° geometry provides controlled fracture of short chips common with cast iron, reducing the risk of built-up edge and machine interruptions. The 0.4 mm corner radius allows a balance between edge strength and fine finish, making the insert suitable for both semi-finishing and finishing passes on grey and ductile cast irons. Specification and ISO grouping for cast iron (K) mean the insert is matched to the material’s characteristic brittle chip form and abrasive tendencies. Straightforward integration and flexible application The CCMW09T304-RK6 form conforms to standard indexable insert interfaces and is available in a T3 thickness with a 7° clearance angle to suit a wide range of toolholders. This standardisation simplifies inventory and tool-change procedures while enabling fast adaptation across turning operations. Technical data such as the rhombus 80° shape and RK6 chipbreaker support predictable regrinding intervals and make the insert a pragmatic choice for batch and series production where consistency and productivity are priorities. Contact Metav Werkzeuge for application advice, toolholder compatibility and to secure Walter Tools CCMW09T304-RK6 WKK20S inserts for cast iron machining; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: CCMW09T304-RK6-WKK20S-WALTER SKU: CCMW09T304-RK6-WKK20S-WALTER Product type: Drehwendeschneidplatte / indexable insert Series: Tiger·tec Silver Grade: WKK20S Facts Corner radius: 0.4 mm Clearance angle: 7° Plate size: 09 Thickness: T3 Geometry: Rhombus 80° Special features Chipbreaker: RK6 Coating: Tiger·tec Silver Material designation: K (cast iron application) Tolerance class: M Execution: W ISO designation: CCMW09T304-RK6 WKK20S FAQ What materials is this insert designed for? The CCMW09T304-RK6 WKK20S insert is designed for machining cast iron (ISO group K) and is optimised for the abrasive wear and short-chip behaviour of those materials. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker on the CCMW09T304-RK6 promotes the formation of short, controlled chips, improving process reliability and reducing interruptions during cast iron turning. Can this insert be used for both finishing and semi-finishing? Yes, the rhombus 80° geometry with a 0.4 mm corner radius enables both semi-finishing and finishing operations, delivering a compromise between edge strength and surface quality. Is the Tiger·tec Silver coating beneficial for productivity? The Tiger·tec Silver coating extends edge life under abrasive conditions typical of cast iron, thereby reducing tool changes and increasing overall productivity when using the CCMW09T304-RK6 WKK20S. Which tolerance class does the insert conform to? This indexable insert conforms to tolerance class M, providing consistent geometric accuracy for reliable seating in toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMW09T308-RK6 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the wear‑resistant WKK10S grade for efficient cast iron turning; the RK6 chipbreaker and rhombic 80° geometry deliver stable chip formation and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. CCMW09T308-RK6 WKK10S – Rhombic 80° turning insert for cast iron, Tiger‑tec Silver (Walter Tools) The CCMW09T308-RK6 WKK10S is an indexable turning insert designed for productive machining of cast iron, combining a robust RK6 chipbreaker with a Tiger‑tec Silver coated carbide grade for reliable wear resistance. Tiger‑tec Silver coating for wear resistance Optimised RK6 chipbreaker for cast iron Rhombic 80° shape with 0.8 mm corner radius Suitable for abrasive cast iron machining Stable chip control for uninterrupted production The RK6 chipbreaker is engineered to manage the typically short, brittle chips produced when machining cast iron, reducing the risk of chip entanglement and tool damage. Combined with the insert’s geometry, this results in consistent chip formation and fewer interruptions on the shopfloor, which supports higher machine uptime and smoother process flows. The performance focus is on repeatable results rather than one‑off improvements. Longer service life through advanced coating and grade selection The coated carbide grade WKK10S, applied with Tiger‑tec Silver technology, is optimised for abrasive cast iron applications. This combination improves wear resistance under demanding conditions and extends tool life compared with conventional grades. The result is a lower tooling consumption over batch runs and more predictable regrinding or indexation intervals, which contributes directly to operational efficiency. Geometry designed for precision and edge stability The rhombic 80° form with a 0.8 mm corner radius and a 7° relief angle provides a balance between edge strength and cutting access. This geometry supports a broad range of turning tasks on cast iron, from medium cuts to finishing passes, by maintaining a reliable cutting edge and reducing the likelihood of premature chipping. The insert’s T3 thickness and standard size ensure compatibility with common toolholders used in industrial turning centres. Practical guidance and application compatibility For machining abrasive cast iron grades, the combination of the RK6 chipbreaker and the WKK10S grade offers a pragmatic choice for workshops seeking predictable performance. If further machining data or optimisation advice is required for specific cast iron sub‑types, Metav Werkzeuge can supply cutting parameters and selection support to align the insert with the chosen toolholder and machine setup, helping to shorten ramp‑up time and reduce trial cuts. Contact Metav Werkzeuge for tailored cutting tool recommendations or for guidance on integrating Walter Tools’ CCMW09T308-RK6 WKK10S insert into existing turning processes Technical data SKU: CCMW09T308-RK6-WKK10S-WALTER Designation: CCMW09T308-RK6 ISO designation: CCMW09T308-RK6 WKK10S Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Shape: Rhombus 80° Size: 09 Thickness: T3 Tolerance class: M Special features Grade: WKK10S Coating technology: Tiger‑tec Silver Chipbreaker: RK6 Material application: Cast iron Material type: Coated carbide FAQ What materials is this insert suitable for? The CCMW09T308-RK6 WKK10S insert is designed specifically for cast iron machining and is optimised for the abrasive and short‑chip behaviour of those materials. Which chipbreaker is integrated and what is its advantage? The RK6 chipbreaker offers controlled chip formation for cast iron, improving evacuation and reducing interruptions during turning operations. What does Tiger‑tec Silver provide in practical terms? Tiger‑tec Silver is a coating technology that enhances wear resistance and thermal stability of the coated carbide grade, helping to extend tool life in abrasive applications. Is this insert compatible with standard toolholders? The rhombic 80° form and standard size allow mounting in a wide range of common turning toolholders; matching the insert to the correct holder will ensure optimal force distribution and edge stability. *Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.*
CCMW09T308-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating for abrasive materials and the RK6 chipbreaker for controlled short chips to maintain stable cycle times and reduced tool changes; order the insert directly via Metav Werkzeuge or contact our consultants for suitability and application advice. CCMW09T308-RK6 WKK20S turning insert for cast iron, Tiger‑tec Silver — Walter Tools CCMW09T308-RK6 WKK20S is a rhombic 80° indexable turning insert optimised for machining cast iron with a robust chip control geometry. Tiger‑tec Silver coating for cast iron Rhombic 80° cutting geometry for strength RK6 chipbreaker for short, controllable chips 7° clearance angle with r0.8 cutting edge Consistent productivity through proven coating technology The Tiger‑tec Silver coating combined with the WKK20S grade is engineered for the abrasive nature of cast iron, delivering a balance between wear resistance and toughness. This results in predictable tool life and fewer unscheduled changes, which supports continuous production. The coating reduces flank wear on the cutting edge, while the substrate metallurgy maintains edge integrity under interrupted cutting conditions. The overall effect is improved process efficiency and lower part variability during long production runs. Short-chip formation for safer, cleaner turning Equipped with the RK6 chipbreaker and a rhombic 80° geometry, this insert promotes the formation of short, breaking chips when turning cast iron. Short chips reduce the risk of entanglement around the tool and workpiece, simplifying chip evacuation and lowering secondary cleaning or handling steps. For workshops seeking reliable cycle times, the controlled chip form translates into fewer stoppages and a cleaner machining environment, contributing to operator safety and consistent surface quality. Robust edge geometry for reliable surface finish The insert's 7° clearance angle and r0.8 cutting edge radius provide a compromise between edge strength and surface finish. The modest clearance prevents rubbing while the rounded corner absorbs cutting forces, reducing edge chipping under heavy engagement. This combination helps to achieve repeatable surface integrity on cast-iron components and supports stable dimension control across batches. The medium tolerance class and standard thickness ensure interchangeability in common insert holders. Practical selection and integration in production As an indexable insert designed for cast-iron applications, this solution fits established toolholders and turning systems without the need for special equipment. The designation follows common ISO-style naming for easy integration into tool lists and procurement. For production engineers, the clear specification of geometry, chipbreaker type and grade simplifies cutter selection and process planning, enabling predictable cycle-time estimates and tool-life calculations. Contact Metav Werkzeuge for application-specific recommendations or to discuss cutting data and holder compatibility; reach out at info@metav-werkzeuge.com or +49 2822 7131930 and reference CCMW09T308-RK6 WKK20S to expedite advice. Technical data Article number: CCMW09T308-RK6-WKK20S-WALTER ISO designation: CCMW09T308-RK6 WKK20S Product type: Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WKK20S Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: M Materials & special features Coating: Tiger‑tec Silver Intended material: Cast iron (K) Chipbreaker: RK6 Geometry: Rhombic 80° Execution: W FAQ What materials is this insert optimised for? This insert, CCMW09T308-RK6 WKK20S by Walter Tools, is optimised for machining cast iron; the WKK20S grade and Tiger‑tec Silver coating address abrasive wear and typical chip behaviour of cast materials. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker on the CCMW09T308-RK6 WKK20S insert produces short, controllable chips, improving chip evacuation and reducing the likelihood of chip entanglement during turning of cast-iron workpieces. Can this insert be used in standard toolholders? Yes, the CCMW09T308-RK6 WKK20S follows common ISO-style dimensions and fits standard indexable turning toolholders that accept rhombic 80° inserts of size 09 and thickness T3. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases wear resistance against abrasive cast-iron surfaces while maintaining sufficient toughness to resist edge chipping, resulting in more predictable tool life and process stability. Which features support repeatable surface quality? The combination of a rhombic 80° geometry, a 7° clearance angle and an r0.8 corner radius on the CCMW09T308-RK6 WKK20S insert helps maintain edge strength and consistent surface finish during production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
CCMW120408-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated RK6 chipbreaker and the rhombic 80° geometry to achieve reliable, cost‑effective cast iron machining; order directly via Metav Werkzeuge or contact our consultants for process recommendations CCMW120408-RK6 WKK20S indexable turning insert, RK6 chipbreaker, for cast iron — Walter Tools The CCMW120408-RK6 WKK20S is an indexable turning insert designed for productive cast iron machining, featuring the Tiger·tec Silver coating and a compact 0.8 mm corner radius for stable finishing and roughing tasks Tiger·tec Silver coated for high wear resistance Optimised for cast iron machining (ISO group K) Rhombic 80° geometry with 0.8 mm corner radius RK6 chipbreaker for stable chip control Longer tool life through advanced coating and grade selection The combination of a Tiger·tec Silver coating and a coated carbide substrate results in markedly improved wear resistance, which extends tool life and reduces changeover frequency. The applied coating technology is engineered to withstand the abrasive nature of cast iron, so cutting intervals are extended and process interruptions are minimised. This yields a clear economic advantage by reducing tool consumption per workpiece while maintaining consistent surface quality. Geometry and chip control that support consistent production The Rhombic 80° shape delivers positive engagement and good edge support, while the 0.8 mm corner radius balances strength and surface finish. The RK6 chipbreaker is tailored to the typical short, brittle chips produced when machining cast iron, promoting predictable chip formation and evacuation. These geometric features enable higher productivity through reliable cutting forces and reduced risk of chip re-cutting, which helps maintain cycle times and machine uptime. Application focus and process reliability for cast iron components Engineered specifically for ISO group K materials, this insert is suited to common cast iron applications where abrasive wear and intermittent chip breakage are typical challenges. Because the grade is matched to the material, the insert provides reproducible performance across batch production and one‑off jobs alike. The resulting process reliability supports planning certainty and contributes to stable manufacturing output with fewer corrective interventions. Contact Metav Werkzeuge today for tailored advice on Walter Tools indexable turning inserts and to secure the optimal Tiger·tec Silver grade for cast iron applications Technical data Article number: CCMW120408-RK6-WKK20S-WALTER Designation: CCMW120408-RK6 WKK20S Type: Indexable turning insert Manufacturer: Walter Tools Facts Plate size: 12 mm Thickness: 4 mm Clearance angle: 7° Corner radius: 0.8 mm Tolerance class: M Special features Tiger·tec Silver coating Grade: WKK20S Material group: K (cast iron) Chipbreaker: RK6 Geometry: Rhombic 80° Series: Tiger-tec Silver FAQ What materials is this insert suited for? The CCMW120408-RK6 WKK20S insert from Walter Tools is specified for ISO group K and is optimised for machining cast iron. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the CCMW120408-RK6 WKK20S enhances wear resistance and helps maintain cutting-edge integrity when turning abrasive cast iron materials. Which chip pattern can be expected with the RK6 chipbreaker? With the RK6 chipbreaker, the CCMW120408-RK6 WKK20S produces controlled, short chips typical for cast iron, aiding safe evacuation and consistent surface results. Is this insert suitable for finishing and roughing operations? Yes, the Rhombic 80° geometry combined with the 0.8 mm corner radius allows the CCMW120408-RK6 WKK20S to be used effectively in both finishing and medium-roughing applications on cast iron. What tolerance and dimensions are provided for this insert? The CCMW120408-RK6 WKK20S is supplied to tolerance class M, with a plate size of 12 mm, a thickness of 4 mm and a clearance angle of 7°. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
CCMW120412-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant Tiger·tec Silver coating, a proven RK6 chipbreaker and a rhombic 80° geometry for reliable cast‑iron turning and consistent tool life. Order the CCMW120412‑RK6 WKK20S insert directly via Metav Werkzeuge or contact the consultants for application support and cutting data. CCMW120412-RK6 WKK20S indexable turning insert – Tiger·tec Silver, for cast iron machining (Walter Tools) CCMW120412-RK6 WKK20S is a rhombic 80° indexable turning insert designed for productive machining of cast iron with a robust RK6 chipbreaker and Tiger·tec Silver coating. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining RK6 chipbreaker for controlled chips Rhombic 80° geometry for universal turning Durable coating and material pairing for longer tool life The coated cemented‑carbide grade WKK20S, part of the Tiger·tec Silver series, is formulated to resist the abrasive wear typical of cast‑iron workpieces. This combination reduces flank wear and extends effective tool life under interrupted and continuous cuts. For production environments the result is fewer index changes and less unplanned downtime, which supports predictable machining cycles and improves overall process economy. Geometry and chip control that stabilise the cutting process The insert’s RK6 chipbreaker, together with the rhombic 80° cutting geometry and a corner radius of 1.2 mm, provides stable cutting and repeatable chip formation when machining cast iron. The specified 7° clearance angle helps avoid rubbing while maintaining adequate edge support. These design choices translate into consistent surface finish and reliable chip evacuation, reducing the need for manual intervention during turning operations. Integration into the production flow and performance benefits As an indexable turning insert, this component enables fast re‑indexing and predictable performance across tool changes. The combination of a purpose‑matched grade and controlled chipbreaking improves cut stability and often allows higher material removal rates compared with non‑optimised grades. For workshops aiming to raise throughput, this insert contributes to steady manufacturing output and reduced overall tooling costs per part without sacrificing surface quality. Contact Metav Werkzeuge for availability, application recommendations and tailored cutting data for the CCMW120412‑RK6 WKK20S insert by Walter Tools Technical data Article number: CCMW120412-RK6-WKK20S-WALTER Product designation: CCMW120412-RK6 WKK20S Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Silver Dimensions & core data Insert size: 12 mm Thickness: 04 Corner radius: 1.2 mm Clearance angle: 7° Shape: Rhombic 80° Features & applications Grade / coating: WKK20S / Tiger·tec Silver Chipbreaker: RK6 Suitable for: Cast iron (K) Tolerance class: M Execution: W FAQ Is this insert suitable for cast iron? Yes. The CCMW120412‑RK6 WKK20S insert by Walter Tools is specifically formulated for cast‑iron machining and is designated for material group K. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKK20S grade improves abrasive wear resistance and supports longer, more consistent tool life in cast‑iron applications. What is the function of the RK6 chipbreaker? The RK6 chipbreaker controls chip shape and evacuation during turning, aiding in stable cutting and reducing interruptions from poor chip formation. Which operations suit the rhombic 80° geometry? Rhombic 80° geometry is versatile for general turning tasks, offering good access to shoulders and allowing a wide range of cutting angles for effective material removal. How is edge strength balanced against surface finish? With a 1.2 mm corner radius and 7° clearance, the insert balances edge support and cutting sensitivity to achieve reliable surface finish while maintaining robustness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CNGA120404EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Benefit from high wear resistance and stable chip control combined with a geometry that supports precise, repeatable turning results; order the CNGA120404EM-2 WBS10 insert directly via Metav Werkzeuge or consult our specialists for application advice. CNGA120404EM-2 WBS10 indexable turning insert by Walter Tools — CBN grade, Rhombus 80° geometry CNGA120404EM-2 WBS10 is an indexable turning insert designed for hardened-material and high-wear machining tasks, offering a robust CBN grade and an 80° rhombic shape for secure seating and consistent cutting performance. *CBN grade WBS10 for hard materials *Rhombus 80° geometry for precise engagement *0° negative rake for stable cutting *0.4 mm corner radius for consistent surface finish High-performance CBN for demanding, wear‑intensive turning The CBN-based WBS10 grade is engineered for hard turning and other high-wear operations, delivering excellent wear resistance and sustained edge life under thermal and abrasive stress. As a cubic boron nitride solution, the material maintains cutting integrity where conventional carbides wear rapidly; this means fewer indexings and predictable tool cycles. The robust substrate and grade selection result in improved process stability, particularly when machining through-hardened steels or components where surface integrity is critical. Practical application requires verification against the specific product matrix to confirm suitability for alloys such as certain cast irons or superalloys. Geometry that ensures repeatable surface quality and tool life The Rhombus 80° form combined with a 0° negative rake creates a cutting edge that resists deflection and secures seating in standard toolholders, which promotes dimensional constancy across long production runs. The 0.4 mm corner radius favours a balanced compromise between edge strength and achievable surface finish, reducing the tendency for micro-chipping while supporting stable chip formation. Users with limited metrology experience should note that corner radius and negative rake affect cutting forces and must be considered when selecting feeds and depths of cut to preserve component tolerances. Practical integration into machining workflows The insert is supplied in the Walter CBN / Hartstoff series and is intended to be matched with holder systems and cutting data recommended for CBN grades. For best results, consult the cutting data sheet and validate parameters on representative parts; the product matrix should be used to confirm material compatibility and cutting-window optimisation. Where process reliability and repeatable part quality are priorities, this insert offers a rational route to fewer reworks and higher throughput. For tailored recommendations or requests for detailed cutting data, Metav Werkzeuge provides application support and sample guidance. Contact Metav Werkzeuge for tailored cutting data, application checks and order processing for Walter Tools inserts at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CNGA120404EM-2-WBS10-WALTER SKU: CNGA120404EM-2-WBS10-WALTER Designation: CNGA120404EM-2 WBS10 Core dimensions and numerical data Insert size: 12 Thickness: 04 Corner radius: 0.4 Clearance angle: 0° (negative) Tolerance class: G Designs and special features Series: Walter CBN / Hartstoff Grade: WBS10 (CBN cutting material) Shape: Rhombus 80° Chipbreaker: 2 Execution: A Material specification: Katalogabhängig FAQ What materials is this insert suited for? The CNGA120404EM-2 WBS10 insert is formulated as a CBN grade for hardened and highly abrasive materials; suitability should be checked against the product matrix for specific steels, certain cast irons or superalloys. How does the 0° negative rake influence cutting behaviour? A 0° negative rake increases edge strength and improves stability under heavy loads; the CNGA120404EM-2 WBS10 therefore delivers consistent cutting forces and enhanced tool life in demanding turning operations. Is the 0.4 mm corner radius suitable for finishing passes? A 0.4 mm radius provides a balance between edge durability and surface quality; for critical finishing passes, adjust feeds and depths to the required surface finish while leveraging the insert’s stable edge. Which series and manufacturer standard does this insert belong to? This insert is part of the Walter CBN / Hartstoff series by Walter Tools and should be integrated using the manufacturer’s recommended holders and cutting data. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com