100mm Bent Turning Tool Carbide P25/P30 Left-Hand DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 durability, a bent DIN 4972 (ISO 2) geometry for improved access, and a robust 12 x 12 mm cross-section to maintain consistent turning performance; order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Wilke bent carbide turning tool 12 x 12 mm (left-hand) – DIN 4972 (ISO 2) A Wilke bent carbide turning tool for precision external turning and confined-access operations, supplied with diamond-ground carbide inserts for fine surface finish. Carbide grades P25/P30 for wear resistance Bent geometry to DIN 4972 (ISO 2) for reach 12 x 12 mm compact cross-section Left-hand cutting direction for reversing operations Precision and endurance through carbide engineering The bent tool offers a compact geometry that combines stability and access, making it suitable where straight holders obstruct the machining path. Manufactured with cemented carbide P25/P30, the tool provides enhanced wear resistance and predictable edge life under steady cutting conditions. The diamond-ground cutting faces ensure a consistent surface quality on turned components while reducing the need for frequent edge reshaping, supporting continuous production runs and predictable maintenance cycles. Geometry that improves reach and process reliability With a bent DIN 4972 (ISO 2) profile and a 12 x 12 mm cross-section, the design reduces interference in tight set-ups and allows safer clearance near shoulders and collars. The left-hand cut orientation enables operations where the workpiece rotation and feed direction demand reverse cutting geometry. The steel shank construction contributes to torsional rigidity, while the bent form helps maintain cutting stability, reducing chatter and improving dimensional repeatability for serial turning tasks. Application-focused benefits and straightforward integration Equipped with diamond-ground carbide inserts mounted on a steel shank, the tool supports fine finishing passes as well as routine external turning sequences. The standard compliance with DIN 4972 (ISO 2) simplifies holder selection and ensures compatibility with common toolpost and turret systems, enabling rapid adoption into existing CNC or manual lathe workflows. Consistent insert geometry contributes to predictable cutting forces and reduced cycle-time variability, which benefits process planning and quality control. Practical handling, packaging and inventory considerations Supplied in a packaging unit of 5, the tool is easy to store and rotate within a small-tool inventory strategy. The compact 100 mm overall length and the square cross-section simplify holder clamping and replacement during set-up changes. Identification by SKU 4118605552NW allows straightforward ordering and inventory tracking; the tool’s standardised dimensions and material specification support reproducible set-ups and minimise procurement complexity for production planners. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment, delivery options and suitability of the Wilke bent carbide turning tool for specific turning operations Technical data Article number: 4118605552NW Label: Drehmeißel DIN 4972ISO2 12x12mm HM P25/P30 li. geb. Wilke Product type: Turning tool Facts Cross-section: 12 x 12 mm Overall length: 100 mm Packaging unit: 5 Special features Material: cemented carbide P25/P30 Form: bent (gebogen) Standard: DIN 4972 (ISO 2) Cutting direction: left-hand Steel shank fitted with diamond-ground carbide inserts FAQ What materials is the tool intended for? The Wilke bent carbide turning tool is specified with cemented carbide P25/P30 inserts, providing general-purpose durability for typical external turning applications; specific material compatibility should be confirmed against cutting parameters. Is the tool compatible with standard DIN 4972 holders? Yes. Compliance with DIN 4972 (ISO 2) ensures compatibility with standard holders designed for that profile, simplifying integration into existing toolposts and turrets. How does the left-hand cutting direction affect its use? Left-hand cutting means the tool is ground for feeds that require reverse cutting orientation; choose this orientation where the lathe feed and rotation require left-hand tools for correct tool–workpiece engagement. Can the diamond-ground inserts improve surface finish? Diamond-ground cutting faces on the inserts are intended to produce a finer initial surface and more consistent cutting behaviour, which can reduce subsequent finishing steps in many turning operations. What information identifies the exact article for ordering? Order or reference the tool by SKU 4118605552NW and the label supplied, which matches the Wilke bent carbide turning tool specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Turning Tool 12x12mm Carbide P25/P30 Bent Right-Hand DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a bent, carbide-tipped turning tool that combines standard conformity and compact dimensions for dependable workshop performance; its diamond-ground carbide plates and 12 x 12 mm cross-section ensure repeatable results and simple toolholder compatibility. Order via Metav Werkzeuge or request further specification support from our technical advisors. Drehmeißel DIN 4972 (ISO 2) 12x12mm HM P25/P30 – Bent, right-hand turning tool by Werner Wilke The Drehmeißel DIN 4972ISO2 12x12mm HM P25/P30 re. geb. Wilke is a bent turning tool designed for standardised lathe operations, offering a compact 12 x 12 mm cross-section and a 100 mm overall length for versatile mounting in conventional tool posts. Carbide P25/P30 cutting plates Bent shank for versatile turning DIN 4972 (ISO 2) standard 12 x 12 mm cross-section, 100 mm length Consistent cutting performance through carbide tip technology The bent turning tool is fitted with carbide P25/P30 cutting plates that are diamond-ground to a precise edge geometry. This configuration reduces tool wear variability and supports stable cutting conditions across repeated cycles. Compliance with DIN 4972 (ISO 2) gives machinists a verifiable baseline for mounting and use, which simplifies process planning in jigs and fixtures. With a focus on measurable performance, the assembly minimises vibration at the cutting point and helps maintain dimensional tolerances during serial production runs. The use of a hardened carbide specification provides predictable edge life, which makes scheduling of tool changes and inspection intervals straightforward. Practical design for easy integration and reliable clamping A steel shank fitted with replaceable carbide plates combines the rigidity of a solid holder with the serviceability of tipped tools. The tool’s bent form permits access to turning profiles that are difficult to reach with straight holders, while the right-hand cutting orientation aligns with common lathe setups. The 12 x 12 mm cross-section and 100 mm overall length were selected to balance stiffness and clearance, ensuring compatibility with standard toolholders and straightforward set-up. The small package size and the packaging unit of 5 support stock management for workshops that require immediate replacements without overstocking. Application clarity and procurement advantages for workshops This turning tool is intended for standardised turning operations where a compact tipped tool is preferred. The combination of a bent holder and diamond-ground carbide plates supports finishing and light-to-medium turning tasks that demand consistent edge geometry and quick replacement of cutting edges. For production environments aiming for predictable throughput, the tool’s conformity to an established standard simplifies quality documentation and supplier communication. Sourcing through a reliable distributor ensures availability and traceability of the item by its article number and specification, aiding inventory control and batch documentation. For specification advice or availability of this Werner Wilke turning tool, contact Metav Werkzeuge for prompt technical support and local stock information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4118605102NW Label: Drehmeißel DIN 4972ISO2 12x12mm HM P25/P30 re. geb. Wilke Brand: Werner Wilke Zerspanungstechnik GmbH Facts Overall length: 100 mm Cross-section: 12 x 12 mm Packaging unit: 5 Conforms to: DIN 4972 (ISO 2) Special features Material: Carbide P25/P30 Bent design Steel shank with diamond-ground carbide cutting plates Right-hand cutting FAQ What is the article number for this turning tool? The article number is 4118605102NW for the turning tool by Werner Wilke. Which standard does the tool follow and why does that matter? The tool conforms to DIN 4972 (ISO 2), which facilitates compatibility with standard toolholders and supports consistent mounting and dimensional control. What carbide grade is used for the cutting plates? The cutting plates are carbide P25/P30, diamond-ground for consistent edge geometry and predictable wear characteristics. Is the holder straight or bent and what advantage does that give? The holder is bent, allowing access to profiles and geometries that are harder to reach with straight holders and improving clearance in certain setups. How many items are supplied per packaging unit? The packaging unit contains 5 pieces. Manufacturer: Werner Wilke Zerspanungstechnik GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Turning Tool 12x12mm Straight Broad Carbide P25/P30, DIN 4976 (ISO 4) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a robust carbide grade and a broad, DIN‑compliant profile to maintain a steady production rhythm with reduced changeovers; order this turning tool directly via Metav Werkzeuge or consult the Metav team for tailored guidance. Turning tool DIN 4976 (ISO 4) 12 x 12 mm, carbide P25/P30 — Wilke The Turning tool DIN 4976 (ISO 4) 12 x 12 mm, carbide P25/P30 is a straight, broad‑profile lathe tool designed for stable, repeatable turning operations where rigidity and wear resistance are priorities Carbide grade P25/P30 for high wear resistance 12 x 12 mm square cross‑section for ISO 4 holders Broad profile for increased rigidity and cutting stability Steel shank with diamond‑ground carbide cutting plates Longer tool life through optimised carbide selection The combination of carbide in grade P25/P30 and a broad profile gives noticeably extended service intervals compared with conventional tool geometries. The chosen grade balances toughness and abrasion resistance, so the cutting edges keep their geometry longer under cyclic loading and abrasive wear. This results in fewer tool changes, steadier part tolerances and a better overall cost‑efficiency for medium‑to‑high volume turning tasks. The design reduces flank wear and helps preserve surface finish over longer runs. Reliable fit and process stability with standardised geometry Compliance with DIN 4976 (ISO 4) and the 12 x 12 mm cross‑section ensures full compatibility with ISO‑4 toolholders and tool posts commonly used in workshops and production lathes. The straight cutting orientation and the broad execution increase resistance to bending forces, offering a more rigid setup for facing and light roughing operations. An overall length of 100 mm keeps the tool manageable in confined toolposts while providing sufficient reach for typical external turning tasks. Practical handling, quick replacement and consistent results Equipped with a steel shank and diamond‑ground carbide cutting plates, the assembly supports accurate seating and repeatable positioning after index or replacement. Packaged in units of five, the set‑sized supply simplifies stock planning and reduces downtime caused by unexpected tool wear. The construction suits both small workshops and industrial settings seeking a durable, standardised insert tool that integrates easily into existing tooling systems. For robust turning operations choose the Wilke carbide turning tool for dependable wear resistance and DIN compatibility — contact Metav Werkzeuge for stock and application advice, either by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4118625102NW Item label: Drehmeißel DIN 4976ISO4 12x12mm HM P25/P30 ger. breit Wilke Material: Hartmetall P25/P30 Product type: Drehmeißel (turning tool) Overall length: 100 mm Cross‑section: 12 x 12 Cutting direction: gerade (straight) Standard: DIN 4976 (ISO 4) Packaging unit: 5 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Overall length: 100 mm Cross‑section: 12 x 12 mm Packaging unit: 5 Special features Carbide P25/P30 Broad profile DIN 4976 (ISO 4) compliant geometry Steel shank with diamond‑ground carbide cutting plates Straight cutting direction FAQ What does the DIN 4976 (ISO 4) designation mean for tool compatibility? DIN 4976 (ISO 4) defines a standardised shank and profile for square turning tools; the tool conforms to this standard so it fits ISO‑4 toolholders and posts without modification. Which carbide grade is used and what advantage does it offer? The tool is furnished with P25/P30 carbide, a balanced grade that provides improved wear resistance and edge stability for routine turning operations. What are the key dimensional specifications for setup planning? The tool features a 12 x 12 mm cross‑section and an overall length of 100 mm, suitable for standard ISO‑4 toolholders and common lathe toolposts. How is the product supplied and how does that affect workshop stock? Delivery is in units of five, enabling simple stock rotation and predictable replacement intervals to support continuous production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Turning Tool Carbide P25/P30 Straight Left-Hand DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Efficient machining with diamond-ground P25/P30 carbide and a standardised 12 x 12 mm DIN 4971 shank ensures consistent, accurate turning results; the straight, left-hand design reduces setup time and supports stable toolholding. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Turning tool DIN 4971 (ISO 1) 12 x 12 mm, carbide P25/P30 — Werner Wilke A Turning tool DIN 4971 (ISO 1) 12 x 12 mm for left-hand straight turning, fitted with diamond-ground P25/P30 carbide cutting inserts on a steel shank. Diamond-ground carbide inserts P25/P30 Straight DIN 4971 (ISO 1) 12 x 12 mm shank Left-hand cutting direction for specific operations Steel shank, robust mounting, precise seating Greater process reliability through carbide grade and ground geometry The tool combines a steel shank with diamond-ground carbide cutting inserts in P25/P30 grade, delivering a balance of wear resistance and toughness for general turning tasks. The diamond grinding of the insert faces refines the cutting edge and reduces micro-chipping, which in turn improves surface finish and extends the interval between tool changes. This results in a more consistent production output and lower rework rates for medium-duty turning operations. Standardised shank dimensions for quick integration Compliance with DIN 4971 (ISO 1) and a 12 x 12 mm cross-section allow straightforward mounting in standard toolholders and turret pockets. The 100 mm overall length provides sufficient overhang for typical setups while keeping rigidity high; this standardisation reduces setup time and minimises the need for custom adapters, supporting faster changeovers on the shop floor. Left-hand configuration to suit specific machining directions The left-hand cutting orientation is ideal for operations that demand material removal towards the machine tailstock or for adapting to existing fixture layouts. Using a dedicated left-hand tool avoids complex re-orientations of workpieces and helps maintain a stable cutting geometry, which contributes to predictable cycle times and a smoother workflow in mixed-production environments. Built for workshop resilience and straightforward use Constructed for routine use in industrial and trade workshops, the design emphasises robust seating and repeatable clamping. The combination of a solid steel shank and reliably mounted carbide inserts makes the tool a pragmatic choice where dependable performance and easy replacement are priorities. For users requiring guidance on toolholder compatibility or cutting data, Metav’s technical advisors can provide specific recommendations. Contact Metav Werkzeuge for application-specific advice and secure supply from our Emmerich facility; Metav Werkzeuge supports procurement and technical consultation for this Werner Wilke turning tool SKU 4118601552NW Technical data Article number: 4118601552NW Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH Compliance: DIN 4971 (ISO 1) Packaging unit: 5 Core dimensions Cross-section: 12 x 12 mm Overall length: 100 mm Materials & features Material: Carbide P25/P30 Form: Straight Cutting direction: Left-hand Shank: Steel shank fitted with diamond-ground carbide cutting inserts FAQ How is the tool mounted in a machine? The turning tool mounts to holders compatible with DIN 4971 (ISO 1); the 12 x 12 mm shank and 100 mm length match standard turret pockets and tool posts for quick installation. What does the P25/P30 carbide designation indicate? P25/P30 refers to carbide grades used for the inserts; these grades provide a general-purpose balance of hardness and toughness suitable for a wide range of turning tasks, with good wear resistance due to the diamond-ground finish. Is the cutting direction left-hand or right-hand? This model is a left-hand turning tool, designed for operations that require cutting towards the tailstock or for setups where a left-hand orientation improves accessibility. Are the cutting inserts supplied mounted on the shank? Yes, the tool is supplied as a steel shank fitted with diamond-ground carbide cutting inserts, ready for mounting and immediate use in compatible toolholders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10×10mm Turning Tool Carbide P25/P30 Right-Hand Straight, DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 cutting tips, a DIN 4971 (ISO 1) straight form and a compact 10 x 10 mm shank for reliable, repeatable turning operations; order supply via Metav Werkzeuge or consult the technical team for application guidance. Turning tool DIN 4971 (ISO 1) 10 x 10 mm HM P25/P30 — straight, right-hand cutting by Werner Wilke Turning tool DIN 4971 (ISO 1) 10 x 10 mm HM P25/P30 is a straight, right-hand cutting tool designed for general turning tasks where consistent chip control and tool stability are required Carbide P25/P30 cutting tips for long life 10 x 10 mm square shank for secure clamping DIN 4971 (ISO 1) straight form for standard tool posts Right-hand cutting direction for conventional turning Precision and durability that support efficient production The straight shank design complies with DIN 4971 (ISO 1), which ensures compatibility with standard tool posts and quick integration into existing turning centres and lathes. Fitted with diamond-ground carbide plates in P25/P30 grades, the tool provides a balance between wear resistance and toughness; this combination reduces tool changes and maintains consistent component dimensions. The square 10 x 10 mm cross-section keeps the insert seat rigid under cutting loads, which improves surface finish and dimensional stability during interrupted cuts or heavy-facing operations. Clear performance benefits for workshop workflows Thanks to the carbide P25/P30 specification, the insert material is optimised for general-purpose steel machining, giving a durable cutting edge that withstands repeated use while preserving cutting geometry. The right-hand cutting orientation is suited to common turning setups, enabling predictable chip flow and easier set-up for operators. By standardising on a tool that follows ISO form and uses a compact shank, workshop throughput can be improved because toolholders and changeover procedures remain simple and repeatable. Practical explanation of technical terms and handling The designation P25/P30 refers to carbide grades with properties tuned to steel machining: P25 emphasises wear resistance for longer life, while P30 offers a compromise with slightly increased toughness. The term diamond-ground indicates a high-precision finish on the carbide plate, which helps reduce cutting forces and extend insert life. The straight configuration means the tool is not offset or angled, which is advantageous where a direct, rigid mounting is preferred. This turning tool is delivered pre-mounted on a steel shank with the carbide plate fixed, reducing set-up time and ensuring a consistent cutting geometry across multiple tools. Suitable applications and user advantages This tool is aimed at industrial machinists and service workshops that require a standard, reliable turning solution for steel components. Its 10 x 10 mm profile fits compact toolholders, making it particularly useful in multi-station setups and for small or medium-sized lathes. Because the tool is built to a widely recognised standard and fitted with robust carbide, maintenance intervals are extended and part tolerances are easier to achieve, which supports streamlined production and less rework. For precise turning operations or application-specific advice, contact Metav Werkzeuge for expert guidance and supply from Emmerich—technical consultants are available to discuss tool selection and compatibility with existing equipment Technical data Article number: 4118601052NW Label: Drehmeißel DIN 4971ISO1 10x10mm HM P25/P30 re. ger. Wilke Product type: Turning tool Material: Hartmetall P25/P30 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Total length: 90 mm Cross-section: 10 x 10 mm Form: straight Cutting direction: right-hand Packaging unit: 5 Special features Diamond-ground carbide cutting plates fitted on steel shank Conforms to DIN 4971 (ISO 1) standard Suitable for general steel turning tasks Straight execution for standard tool posts FAQ What materials is the turning tool suitable for? The turning tool is supplied with P25/P30 carbide, which is optimised for steel machining and general turning applications. Is the shank compatible with standard tool holders? Yes, the straight 10 x 10 mm shank and DIN 4971 (ISO 1) form ensure compatibility with common tool posts and holders. Does the tool cut left-hand or right-hand? This version is a right-hand cutting tool, intended for conventional turning directions. How does the diamond-ground plate benefit the process? The diamond-ground carbide plate offers a fine cutting edge finish that reduces cutting forces, improves surface quality and extends tool life. Can this tool be used for interrupted cuts or heavier facing operations? The robust square shank and carbide plates provide good stability for interrupted cuts and facing; however, machining parameters should be set according to material and machine capability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm 16 x 10 Carbide Turning Tool, 80° Point, Straight Cut, DIN 4975 - Werner Wilke Zerspanungstechnik GmbH
Reliable workshop performance comes from combining a robust steel shank, cemented carbide P25/P30 cutting plates and a standardised interface for simple mounting; the 80° pointed geometry ensures repeatable, precise external turning. Order the turning tool directly via Metav Werkzeuge or ask the consultants for application advice. Wilke turning tool DIN 4975 — 16 x 10 mm, carbide P25/P30, pointed The Wilke turning tool DIN 4975 16 x 10 mm is a DIN‑standard lathe tool designed for precision external turning operations on conventional and CNC lathes. Cemented carbide P25/P30 tip for durability Conforms to DIN 4975 standard Steel shank fitted with diamond‑ground plates 80° pointed tip for accurate profiling Consistent cutting performance for everyday production The solid combination of a steel shank with diamond‑ground carbide cutting plates delivers stability in the toolholder and a consistently sharp cutting edge. The use of cemented carbide P25/P30 provides a balance between toughness and wear resistance, which supports predictable tool life in continuous turning tasks. This stability reduces downtime for re‑setting and contributes to a more efficient production flow without sacrificing surface quality. Standardised interface for fast set‑up and repeatability Designed to the DIN 4975 specification and produced in a 16 x 10 mm cross-section, the tool mates cleanly with compatible toolholders, simplifying changeovers and guaranteeing repeatable positioning. The 80° pointed tip creates an accurate contact geometry for external profiles and small radii, which aids process reliability and reduces the need for repeated checking. Clear, standard dimensions help planners and operators integrate the tool into existing tool sets without additional adapters. Practical design that suits workshop routines With a total length of 110 mm and a straight cutting direction, the unit is engineered for straightforward handling and mounting. The diamond‑ground inserts give a defined cutting edge geometry, improving the finish on turned components and allowing for predictable wear patterns. The construction supports routine maintenance procedures typical for metal‑cutting shops and keeps replacement and inspection tasks simple and quick. For tailored technical advice or to arrange a supply of these Wilke carbide turning tools, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will assist with selection and compatibility details. Technical data Article number: 4118620052NW Label: Drehmeißel DIN 4975 16x10mm HM P25/30 ger. spitz Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Overall length: 110 mm Cross-section: 16 x 10 mm Tip angle: 80° Packaging unit: 5 Special features Material: cemented carbide P25/P30 Design: pointed tip, straight cutting direction Standard: DIN 4975 Construction: steel shank with diamond‑ground carbide cutting plates FAQ What dimensions define the tool and its compatibility with toolholders? The turning tool is supplied in a 16 x 10 mm cross‑section with a total length of 110 mm and conforms to the DIN 4975 standard, so it fits compatible DIN‑4975 toolholders used in workshop and production environments. Which cutting geometry does the tool use for external turning? The unit features an 80° pointed geometry and a straight cutting direction; this configuration supports precise external profiling and repeatable contact geometry during turning operations. What is the cutting material and what benefits does it bring? The tool is equipped with cemented carbide P25/P30 plates; this grade offers a balance of wear resistance and toughness, promoting stable tool life and consistent surface finish. Can the carbide plates be reconditioned or replaced? The turning tool is built with diamond‑ground carbide plates mounted on a steel shank; replacement or reconditioning depends on the workshop’s maintenance practices and the spare parts availability for the Wilke system. Is this tool suitable for use on both manual lathes and CNC machines? The standardised DIN 4975 interface and robust construction make the tool suitable for mounting in both manual and CNC lathe toolholders where the 16 x 10 mm cross‑section and 80° tip meet the process requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12 x 12mm Turning Tool Carbide P25/P30 Straight Right-Hand DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 durability, a standardised 12 x 12 mm square shank to DIN 4971 (ISO 1) and a compact 100 mm overall length for consistent, efficient lathe work. Order the turning tool directly via Metav Werkzeuge or ask our consultants if needed. Turning tool DIN 4971 (ISO 1) 12 x 12 mm, carbide P25/P30 (right-hand, straight) — Werner Wilke A turning tool DIN 4971 (ISO 1) 12 x 12 mm designed as a straight, right-hand lathe tool for precision external turning and general workshop turning applications Carbide P25/P30 grade for balanced wear resistance Square shank 12 x 12 mm to DIN 4971 Diamond-ground carbide tips for consistent sharpness Consistent cutting performance for general turning tasks Equipped with P25/P30 carbide, this lathe tool offers a reliable compromise between toughness and wear resistance, making it suitable for a wide range of turning operations. The diamond-ground carbide cutting tips maintain a sharp cutting edge, which reduces chatter and improves surface finish on turned components. Mounted on a straight steel shank to DIN 4971 (ISO 1), the tool provides repeatable seating and alignment in standard toolholders, supporting stable cuts and predictable tool life. Compact design that suits small setups and tight tool posts The compact 100 mm overall length combined with the 12 x 12 mm square cross-section allows the tool to fit into confined tool posts and multi-station turrets. Because the shank conforms to the DIN 4971 (ISO 1) specification, interchangeability between holders is simplified, reducing setup time and minimising the need for alternative adapters. The right-hand orientation is optimised for conventional turning directions, ensuring correct chip flow and cutting geometry without modification. Practical benefits for workshop productivity Using a standardised shank and robust carbide grade streamlines inventory management and reduces downtime from tool changes. The diamond-ground finish on the carbide tips improves initial cutting behaviour and extends effective tool life, which contributes to more consistent part tolerances and fewer reworks. For machine shops seeking straightforward, reliable tooling, this tool supports efficient production runs and predictable maintenance cycles. Handling and application guidance for best results The tool is supplied as a straight, right-hand turning tool with carbide tips mounted on a steel shank; correct clamping to the holder is essential for repeatable results. Ensure the insert and holder are aligned to the correct centre height and use appropriate feeds and speeds for the workpiece material to benefit from the P25/P30 combination. Regular inspection of the cutting edge for built-up edge or flank wear will preserve surface finish and dimensional accuracy over longer runs. Discuss application specifics and compatibility with Metav Werkzeuge to ensure the Wilke carbide turning tool matches the intended machining tasks Technical data Article number: 4118601102NW Product type: Turning tool Material: Carbide P25/P30 Cross-section: 12 x 12 mm Overall length: 100 mm Orientation: Right-hand Standard: DIN 4971 (ISO 1) Shank form: Straight Packaging unit: 5 Facts Cross-section: 12 x 12 mm Overall length: 100 mm Packaging unit: 5 SKU: 4118601102NW Special features Carbide P25/P30 Diamond-ground carbide cutting tips Straight execution Right-hand cutting direction Conforms to DIN 4971 (ISO 1) FAQ What material is used for the cutting tips? The Wilke turning tool is fitted with carbide P25/P30 cutting tips, chosen to balance toughness and wear resistance for general turning applications. Which shank standard and size does this tool use? The tool uses a 12 x 12 mm square shank in accordance with DIN 4971 (ISO 1) for standardised clamping and interchangeability. What is the overall length and packaging unit? Overall length is 100 mm and the tool is supplied in a packaging unit of 5 pieces. Is the tool suitable for left-hand turning? This variant is manufactured as a right-hand turning tool; left-hand operations require the corresponding left-hand version. How are the cutting tips finished? The carbide tips are diamond-ground, which enhances initial sharpness and contributes to a consistent surface finish. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm 20 x 12mm Carbide Turning Tool 80° Point Straight Cut DIN 4975 - Werner Wilke Zerspanungstechnik GmbH
Combine robust carbide P25/P30 tips with a standardised DIN 4975 shank and an 80° pointed geometry to ensure consistent finishing and long tool life in routine turning operations. Order the turning tool directly via Metav Werkzeuge or consult our specialists for holder compatibility and workshop optimisation. Turning tool DIN 4975, 20 x 12 mm — pointed carbide P25/P30, Werner Wilke The turning tool DIN 4975 20 x 12 mm is a pointed-profile lathe tool mounted on a steel shank, designed for precise external turning and finishing tasks in standard tool holders. Carbide P25/P30 tips for durable cutting DIN 4975 shank, 20 x 12 mm cross section 80° pointed geometry for precise turning Precision and durability for consistent turning results The tool combines carbide P25/P30 cutting plates with a diamond-ground finish to deliver a reliable edge that sustains dimensional accuracy and surface quality over extended runs. The pointed geometry minimises vibration during fine cuts, improving repeatability in finishing passes and reducing the need for rework. With the cutting plates mounted on a rigid steel shank, the assembly is optimised to transfer cutting forces cleanly, which contributes to stable machining and predictable tool life. Fast integration with standard tool systems and reduced setup time Designed to the DIN 4975 profile, the shank with a 20 x 12 mm cross section fits common tool holders without additional adaptation, lowering setup complexity and downtime. The 125 mm overall length provides sufficient projection for a variety of external turning applications while keeping rigidity high. Standardised dimensions enable quicker changeovers and simpler inventory management for workshops that rely on consistent tooling geometry across machines. Practical cutting geometry for dependable workshop performance An 80° tip angle with a pointed configuration supports accurate profiling and fine finishing, while the straight cutting direction suits conventional turning cycles. The assembly’s construction—steel shank equipped with diamond-ground carbide plates—favourably balances toughness and edge retention for routine production work. For purchasers seeking guidance on holder selection or specific machining tasks, technical advice is available to align tool choice with production goals and processing parameters. Contact Metav Werkzeuge for personalised advice on holder compatibility and workshop supply from our Emmerich location; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss application suitability and delivery options Technical data Article number: 4118620102NW Product type: Turning tool Material: Carbide P25/P30 Standard: DIN 4975 Cross section: 20 x 12 mm Overall length: 125 mm Tip angle: 80° Cutting direction: straight Form: pointed Packaging unit: 5 Facts Cross section: 20 x 12 mm Overall length: 125 mm Tip angle: 80° Packaging unit: 5 Special features Steel shank with diamond-ground carbide cutting plates Carbide grade P25/P30 Pointed geometry (spitz) DIN 4975 compatibility Designed for external turning and finishing operations FAQ What holder standard does this turning tool require? The tool is manufactured to the DIN 4975 standard and therefore fits tool holders designed for a 20 x 12 mm shank profile. Is the cutting edge pre-ground or coated? The turning tool is supplied with diamond-ground carbide cutting plates in grade P25/P30; no additional coating is specified. How long is the tool and how does that affect rigidity? The overall length is 125 mm; this length offers a compromise between reach and rigidity suitable for typical external turning tasks. Can this tool be used for finishing and profiling? Yes, the 80° pointed geometry is intended to support precise profiling and finishing operations while maintaining surface quality. What is the packaging unit and how is it supplied? The item is supplied in a packaging unit of 5, facilitating routine replacement and small-batch stocking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm 20 x 20 Bent Turning Tool Solid Carbide P25/P30 Right-Handed, DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a carbide P25/P30 cutting edge combined with a bent profile and DIN conformity for stable, repeatable turning results; order directly via Metav Werkzeuge or consult the advisors for application guidance. Turning tool DIN 4972 (ISO 2) 20 x 20 mm, carbide P25/P30 — bent, right-hand turning tool (Werner Wilke) Turning tool DIN 4972 (ISO 2) 20 x 20 mm, carbide P25/P30 is a bent, right-hand lathe tool equipped with diamond-ground carbide inserts on a steel shank, designed for precision external turning in production and workshop environments Carbide grade P25/P30 for long life Bent profile for improved access DIN 4972 (ISO 2) compatibility Right-hand cutting direction Consistent cutting performance from a precision carbide grade The tool's carbide composition, specified as P25/P30, provides a balanced combination of hardness and toughness suitable for a broad range of turning tasks. This grade is selected to deliver wear resistance and consistent edge retention, which reduces the frequency of regrinding and tool changes in batch production. The use of a diamond-ground cutting face on the insert enhances the initial sharpness and reduces vibration at cut start, contributing to a stable surface finish and predictable tool life in continuous operations. Bent profile for access in confined setups and controlled chip evacuation A bent tool body improves approach angles in applications where straight holders are obstructed or where the geometry of the workpiece demands an offset cutting position. The tool's construction — a steel shank fitted with diamond-ground carbide inserts — stabilises the cutting edge and directs chips away from the work area, lowering the risk of recutting and improving process reliability. The bent shape also facilitates setup in multi-station lathes and reduces the need for additional fixturing in awkward tool positions. Standardised dimensions for secure clamping and repeatable results Manufactured to DIN 4972 (ISO 2), the tool uses a 20 x 20 mm cross-section that matches common toolholder slots, enabling a secure fitting that minimises play under load. With an overall length of 125 mm, the geometry is compact enough for close-quarter turning yet long enough to provide appropriate leverage and clearance on conventional toolposts. Standard conformity means compatibility across equipment ranges and simplifies stocking and reordering strategies for maintenance teams. Production-oriented design for reliable right-hand external turning Configured for right-hand cutting, this turned tool delivers repeatable performance for external facing and profiling tasks where direction-specific geometry is required. The combination of a prepared carbide cutting face and a robust shank supports stable cuts at moderate to higher feed rates when paired with suitable insert grades and machine settings. The design is aimed at workshops and industrial users seeking a dependable, ready-to-fit solution for everyday turning operations. Contact Metav Werkzeuge today for precise application advice and secure supply of turning tools tailored to production needs; Metav Werkzeuge’s consultants can advise on compatibility and batch requirements Technical data Article number: 4118605202NW Label: Turning tool DIN 4972 (ISO 2) 20 x 20 mm, carbide P25/P30, bent, right-hand Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Cross section: 20 x 20 mm Overall length: 125 mm Packaging unit: 5 UID: 4118605202NW Special features Material: Hartmetall P25/P30 (carbide) Form: bent Standard: DIN 4972 (ISO 2) Cutting direction: right-hand Steel shank with diamond-ground carbide inserts FAQ What materials is this turning tool intended for? The turning tool from Werner Wilke, specified as a carbide tool with P25/P30 grade, is designed primarily for standard turning applications where carbide inserts are appropriate; matching insert grades should be selected to suit specific workpiece materials. Is the tool compatible with standard toolholders? Yes — compliance with DIN 4972 (ISO 2) and the 20 x 20 mm cross-section ensure compatibility with common toolholders that accept this standard size. Can the carbide inserts be resharpened or replaced? The diamond-ground carbide cutting plates are intended for replacement or reconditioning according to workshop practice; replacement inserts that match the original geometry will restore cutting performance. Does the bent design affect cycle times or finish quality? The bent profile improves access and chip direction; when combined with the P25/P30 carbide grade and correct machining parameters, it supports consistent surface finish and reliable cycle performance. What is the packaging unit and how is the product supplied? The product is supplied in packaging units of 5, allowing for small-batch replenishment and straightforward workshop stocking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm 20 x 20 Straight Turning Tool Wide Carbide P25/P30, DIN 4976 (ISO 4) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a broad 20 x 20 mm profile and diamond-ground carbide cutting plates for steady, repeatable turning operations; order directly via Metav Werkzeuge or request technical advice from our consultants. Turning tool DIN 4976 (ISO 4) 20 x 20 mm – broad carbide-equipped turning tool by Werner Wilke The Turning tool DIN 4976 (ISO 4) 20 x 20 mm is a broad, straight-cutting lathe tool fitted with diamond-ground carbide plates, designed for reliable external turning and easy integration into standard holders Broad 20 x 20 profile for stable clamping Carbide grade P25/P30 for wear resistance Conforms to DIN 4976 (ISO 4) standard Steel shank with diamond-ground cutting plates Long-term stability and consistent cutting results This turning tool delivers stable cutting performance thanks to its broad 20 x 20 cross-section and solid construction. The steel shank combined with diamond-ground carbide plates provides a rigid connection between toolholder and insert, reducing vibration and improving surface finish. For production environments where repeatability is critical, the robust geometry helps maintain tolerances over prolonged runs and supports predictable tool life. The compliance with DIN 4976 (ISO 4) ensures compatibility with standard tool clamping systems, simplifying setup and changeover. Precision-ground carbide for extended service life Equipped with carbide P25/P30, the tool offers a balanced combination of toughness and hardness suitable for general turning tasks. Diamond grinding of the cutting plates refines edge geometry and reduces microchipping, which translates into longer intervals between regrinds and fewer interruptions. The result is reduced downtime and improved process economy without complex handling procedures. The carbide designation indicates a commercially established grade used where dependable wear resistance is required. Designed for simple integration and secure fastening The broad form and standardised shank dimensions allow direct mounting in common toolholders that accept the DIN 4976 (ISO 4) profile. The 20 x 20 section gives even contact in clamping devices, lowering the risk of tool movement under load and ensuring consistent cut depth. Where machines and fixtures follow international norms, installation is straightforward: set the tool to centre height, secure the clamping, and verify alignment. This practical design reduces setup time and supports faster machine cycles. Practical workshop benefits and handling Packaged in a small multiple unit, the item supports stock control for small and medium-sized workshops that require quick replacements. The construction with carbide tips on a steel shank provides a balance between replaceable cutting performance and low-cost carrier durability. Operators will notice improved surface quality and fewer edge failures, while maintenance routines remain uncomplicated. Documentation and labelling follow industry conventions so that identification and replenishment are quick and traceable. For robust, precision turning with Werner Wilke tooling, contact Metav Werkzeuge for ordering and tailored technical consultation — info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: 4118625202NW UID: 4118625202NW Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH Label: Drehmeißel DIN 4976ISO4 20x20mm HM P25/P30 ger. breit Wilke Core data Overall length: 125 mm Cross section: 20 x 20 mm Packaging unit: 5 Standard: DIN 4976 (ISO 4) Special features Material: Carbide P25/P30 Form: broad Cutting direction: straight Shank: steel shank with diamond-ground carbide cutting plates FAQ What does DIN 4976 (ISO 4) indicate for this tool? DIN 4976 (ISO 4) denotes the standardised shank and profile for turning tools, ensuring the Turning tool DIN 4976 (ISO 4) 20 x 20 mm from Werner Wilke fits common holders that accept this specification. Which carbide grades are fitted and what are their benefits? The tool is fitted with carbide P25/P30 plates; these grades provide a compromise of toughness and wear resistance that supports longer tool life and reliable performance in general turning tasks. Is this tool suitable for automated turret change systems? The 20 x 20 broad profile and conformity to DIN 4976 (ISO 4) make the tool compatible with many automated turret and holder systems designed for standardised shank dimensions. How is the cutting edge prepared on the tool? Cutting plates are diamond-ground, which refines the cutting geometry, reduces microchipping and contributes to improved surface finish and extended intervals between regrinds. How many tools are supplied per packaging unit? The item is supplied in packaging units of five, allowing straightforward stock replenishment for workshop needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Precision Turning Tool 25x25mm Carbide P25/P30 Bent Right-Hand, DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a robust, DIN‑compliant turning solution that combines a 25 x 25 mm cross section and carbide P25/P30 cutting edges for consistent performance in general turning tasks; order directly via Metav Werkzeuge or ask the consultants for application advice. Turning tool DIN 4972 (ISO 2) 25 x 25 mm — carbide P25/P30, right‑hand, bent (Werner Wilke) A bent turning tool DIN 4972 (ISO 2) 25 x 25 mm designed for right‑hand turning, fitted with diamond‑ground carbide inserts for reliable cutting performance in workshop environments Bent design to DIN 4972 (ISO 2) Carbide grade P25/P30 inserts fitted Steel shank with diamond-ground inserts Right-hand cutting for standard turning Consistent geometry and workshop compatibility for reliable turning The bent turning tool is manufactured to DIN 4972 (ISO 2), ensuring repeatable tool geometry and straightforward mounting in standard tool holders. The 25 x 25 mm cross section and a total length of 140 mm provide a stable connection between the tool and the machine, reducing vibration and improving process reliability. With the tool fitted on a steel shank and equipped with precision diamond-ground carbide cutting plates, dimensional consistency and repeatability are prioritised, which simplifies setup and reduces measurement variation in serial production. Balanced carbide grade and cutting orientation for everyday machining Equipped with carbide P25/P30, the tool offers a considered balance between wear resistance and toughness suitable for a wide range of turning operations in workshop environments. The right‑hand cutting orientation and the bent profile improve clearance and chip flow on conventional lathes, supporting steady cutting conditions and predictable tool life. For purchasers seeking a dependable standard turning solution, this combination of geometry and carbide specification supports both finishing and general‑purpose roughing where stable cutting parameters are required. Practical benefits that keep the production line moving The design focuses on operational efficiency: the mounted carbide plates are diamond‑ground for a consistent cutting edge, which reduces the time spent on regrinding or quality checks and helps maintain surface finish. The robust shank and standardised interface contribute to lower tool change frequency and reduced machine downtime. By choosing a DIN‑compliant, carbide‑tipped turning solution, workshops gain a component that is easy to integrate into existing tooling systems while supporting predictable tool performance and process stability. Contact Metav Werkzeuge for availability and tailored technical guidance on Werner Wilke carbide turning tools — email info@metav-werkzeuge.com or call +49 2822 7131930 Product details Article number: 4118605252NW Label: Drehmeißel DIN 4972ISO2 25x25mm HM P25/P30 re. geb. Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Tool type: Turning tool Configuration: bent, right-hand Dimensions & core data Cross section: 25 x 25 mm Overall length: 140 mm Packaging unit: 3 UID: 4118605252NW Materials & features Carbide: P25/P30 Steel shank with diamond-ground carbide inserts Standard: DIN 4972 (ISO 2) Bent design FAQ What standard does this turning tool conform to? The turning tool conforms to DIN 4972 (ISO 2), which defines the geometry and mounting dimensions for tools of this type (SKU 4118605252NW). Which cutting direction is provided by the tool? This item is configured for right‑hand cutting; the bent profile supports the intended chip direction and clearance for conventional lathes. What carbide grade is used and what does it mean? The tool is fitted with P25/P30 carbide plates; this grade provides a balanced combination of hardness and toughness suitable for general turning tasks in workshop environments. Are the cutting plates supplied already ground? Yes, the steel shank is fitted with diamond‑ground carbide inserts, providing a consistent cutting edge on delivery and reducing the need for immediate reconditioning. Which tool holders are compatible with this product? Compatibility aligns with the DIN 4972 (ISO 2) interface, making the tool suitable for standard holders designed for that specification Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 x 16mm Turning Tool Broad Carbide P25/P30, DIN 4976 (ISO 4) - Werner Wilke Zerspanungstechnik GmbH
Combining carbide P25/P30 cutting geometry with a 16 x 16 mm robust cross-section and a 110 mm overall length delivers a stable, wide, straight-profile turning solution for consistent insert life and secure seating. Order the tool directly via Metav Werkzeuge or contact the advisors for application support and compatibility guidance. Turning tool DIN 4976 (ISO 4) 16 x 16 mm HM P25/P30 — Werner Wilke The Turning tool DIN 4976 (ISO 4) 16 x 16 mm HM P25/P30 is a wide, straight-profile lathe tool designed for stable mounting in standard holders and repeatable turning operations across general machining tasks Carbide P25/P30 cutting grade for durability Solid 16 x 16 mm cross-section for rigidity 110 mm overall length for standard tool posts Diamond-ground carbide insert fitted Stable carbide geometry for reliable machining results Equipped with a carbide P25/P30 cutting configuration, this wide turning tool prioritises long tool life and consistent cutting geometry. The diamond-ground cutting plate offers a precise edge and uniform flank, which results in reproducible cutting behaviour and more predictable maintenance intervals. Compliance with DIN 4976 (ISO 4) ensures compatibility with common clamping systems, so toolholders can be changed or replaced without extensive readjustment, maintaining production rhythm and reducing downtime. Rigidity and dimensions that reduce vibration and improve finishes The combination of a 16 x 16 mm cross-section and a 110 mm overall length gives a favourable stiffness-to-reach ratio that helps to minimise chatter during straight turning operations. Reduced vibration translates directly into a better surface finish and less frequent rework. The wide execution of the cutting head improves load distribution across the insert, supporting steady chip formation and consistent dimensional control in serial production environments. Secure mounting and straightforward integration into workflows A steel shank fitted with a diamond-ground carbide insert provides a secure seating surface and repeatable positioning when the insert is tightened. This construction simplifies tool change routines and supports a fast return to nominal machining parameters after maintenance or insert replacement. The straight cutting orientation helps to maintain predictable force vectors in the cut, which benefits process stability and makes the tool suitable for routine lathe setups that demand dependable, repeatable results. Contact Metav Werkzeuge for tailored advice on integrating this wide, straight carbide turning tool into the production line; Metav’s specialists in Emmerich can confirm fitment, delivery options and technical suitability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4118625152NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning tool (Drehmeißel) Label: Drehmeißel DIN 4976ISO4 16x16mm HM P25/P30 ger. breit Wilke Dimensions & core data Overall length: 110 mm Cross-section: 16 x 16 mm Form: wide Cutting direction: straight Standard: DIN 4976 (ISO 4) Packaging unit: 5 Materials & special features Material: carbide P25/P30 Steel shank fitted with diamond-ground carbide insert Wide execution Straight-cutting orientation FAQ What standard does this turning tool comply with? This turning tool complies with DIN 4976 (ISO 4), which ensures compatibility with standard toolholders and repeatable positioning for the Turning tool DIN 4976 (ISO 4) 16 x 16 mm HM P25/P30 from Werner Wilke (SKU 4118625152NW). Which grade of cutting material is used? The tool is supplied with carbide P25/P30 cutting plates; the diamond-ground finish supports consistent geometry and wear characteristics for stable machining. What are the key dimensions for selecting a compatible holder? Select holders compatible with a 16 x 16 mm cross-section and an overall tool length of 110 mm to ensure correct seating and clamping of this tool. Is the insert permanently brazed or replaceable? The tool features a steel shank fitted with a diamond-ground carbide cutting plate; the construction is intended for secure seating and routine maintenance practices typical for carbide-tipped turning tools. How is the tool packaged for delivery? The item is supplied in packaging units of 5, as stated in the product data for the Turning tool DIN 4976 (ISO 4) 16 x 16 mm HM P25/P30 (SKU 4118625152NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 x 16mm Turning Tool Carbide P25/P30 Bent Right-Hand DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 cutting heads, a bent 16 x 16 mm profile for improved clearance, and conformity with DIN 4972 (ISO 2) for consistent set-up and efficient turning operations; order the Wilke bent turning tool directly via Metav Werkzeuge or consult our specialists for application guidance. Wilke bent turning tool – DIN 4972 (ISO 2), 16 x 16 mm, carbide P25/P30 The Wilke bent turning tool is a right‑hand, bent lathe tool designed for standard external turning tasks on lathes, offering a compact 110 mm total length and carbide cutting plates for durable performance Carbide P25/P30 cutting heads Bent profile for clearance and chip evacuation 16 x 16 mm square shank for standard tool holders Right‑hand orientation for conventional turning Precision and repeatability for everyday turning The bent turning tool combines a steel shank with diamond‑ground carbide inserts in P25/P30 grades, delivering consistent edge geometry and extended tool life. The adherence to DIN 4972 (ISO 2) ensures repeatable positioning in compatible tool posts, which minimises set‑up time and reduces scrap. This results in reliable cycle times and predictable component tolerances in small‑batch and series production alike. Geometry that improves clearance and chip control A bent design provides increased clearance between the workpiece and the toolholder, lowering the risk of interference on external contours. The right‑hand cutting orientation and the 16 x 16 mm cross‑section keep the assembly rigid, reducing tool vibration and improving surface finish. Diamond grinding of the carbide faces contributes to stable cutting edges, which supports smoother feeds and helps control chip flow during typical turning operations. Robust construction for consistent workshop performance The use of Hartmetall P25/P30 carbide in the cutting plates offers a balance between toughness and wear resistance appropriate for a wide range of turning tasks. The compact overall length of 110 mm makes the tool suitable where space is limited on the carriage, while the square 16 x 16 mm section fits common holders. Benefit here is reduced downtime: fewer tip changes and consistent cutting behaviour prolong uninterrupted production sequences. Standards, packaging and practical advantages Conformity to DIN 4972 (ISO 2) simplifies replacement and inventory management, as the tool aligns with established toolholder dimensions and clamping systems. Supplied in pack units of 5, the set‑up supports controlled stock rotation and predictable resupply. The bent execution also facilitates access to recesses and stepped turned areas where straight holders may be obstructed, improving flexibility without sacrificing stability. For tailored advice on integrating the Wilke bent turning tool into workshop processes, contact Metav Werkzeuge for a supply recommendation and delivery details at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4118605152NW Label: Drehmeißel DIN 4972ISO2 16x16mm HM P25/P30 re. geb. Wilke Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH SKU: 4118605152NW Specifications Total length: 110 mm Cross-section: 16 x 16 mm Standard: DIN 4972 (ISO 2) Cutting direction: Right Pack unit: 5 Materials & Features Cutting material: Carbide P25/P30 Construction: Bent design Shank: Steel shank with diamond‑ground carbide cutting plates Execution: Right‑hand turning FAQ What is the intended application for this bent turning tool? The Wilke bent turning tool (turning tool, SKU 4118605152NW) is intended for right‑hand external turning operations on lathes where a bent profile improves clearance and access to stepped contours. Which standard ensures compatibility with toolholders? Compatibility is ensured by conformity to DIN 4972 (ISO 2), which allows secure and repeatable clamping in holders designed to this standard. What is the cutting material and its benefit? The tool is fitted with carbide P25/P30 cutting plates, offering a balance of wear resistance and toughness for consistent edge life in routine turning tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 x 16mm Turning Tool Carbide P25/P30 Straight Left-Hand DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Reliable turning performance is achieved through the combination of a steel shank fitted with diamond-ground carbide inserts and adherence to DIN 4971 (ISO 1), giving consistent results in left-hand turning operations. Order supply and technical guidance via Metav Werkzeuge or consult our specialists for application advice. Wilke straight turning tool DIN 4971 (ISO 1) — 16 x 16 mm, carbide P25/P30, left-hand A Wilke straight turning tool designed for stable left-hand turning in standard holders, offering robust carbide cutting edges for repeatable machining. Straight steel shank with diamond-ground inserts Carbide grade P25/P30 for consistent edge life Conforms to DIN 4971 (ISO 1) standard Left-hand cutting for specific turning operations Precision that delivers predictable chip control and surface quality The tool combines a steel shank with diamond-ground inserts made from carbide P25/P30, providing a stable cutting geometry that supports predictable chip formation. Conformity with DIN 4971 (ISO 1) ensures compatibility with standard clamping interfaces and repeatable axial alignment, which in turn reduces setup variance and contributes to lower scrap rates. The straight form and defined cross-section support rigid mounting, improving precision in short to medium-length turning tasks. Durable cutting edges for reduced tool changes Carbide in grades P25/P30 is selected for its balance of toughness and wear resistance, which translates into longer service intervals under conventional turning conditions. The diamond grinding on the cutting inserts refines the edge microgeometry, enhancing initial sharpness and maintaining consistent cutting behaviour over time. This robustness reduces unplanned downtime and supports steadier production output, making the tool suitable for routine batch machining where predictable tool life is valued. Compact dimensions for straightforward integration With a cross-section of 16 x 16 mm and an overall length of 110 mm, the design fits common toolholders that follow DIN 4971 (ISO 1) guidelines, simplifying replacement and inventory management. The left-hand cutting orientation is intended for operations requiring reversed feed direction or specific fixture layouts. Supplied in packaging units of five, the tool is practical for small series production and maintenance stock, easing logistical planning and enabling quick replenishment when paired with Metav Werkzeuge’s centralised supply. Choose the Werner Wilke straight turning tool for dependable left-hand turning and contact Metav Werkzeuge for supply and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4118601602NW SKU: 4118601602NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning tool Facts Cross-section: 16 x 16 mm Overall length: 110 mm Packaging unit: 5 Cutting direction: left-hand Special features Material: carbide P25/P30 Form: straight Standard: DIN 4971 (ISO 1) Steel shank with diamond-ground carbide inserts FAQ What is the intended clamping standard for this turning tool? The tool follows DIN 4971 (ISO 1), which defines the shank geometry for compatibility with standard clamping systems. Is the cutting direction left-hand or right-hand? This turning tool is specified for left-hand cutting, making it suitable for operations that require reverse feed orientation. Which carbide grade is used for the cutting inserts? The cutting edges are made from carbide P25/P30, chosen for a balance of toughness and wear resistance. What are the key dimensions to check for toolholder compatibility? Check the 16 x 16 mm cross-section and the 110 mm overall length to ensure fitment in holders compatible with DIN 4971 (ISO 1). How is the cutting edge prepared? The inserts are diamond-ground, delivering a refined edge geometry for consistent cutting behaviour. Manufacturer: Werner Wilke Zerspanungstechnik GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 x 16mm Turning Tool Right Hand Straight Carbide P25/P30, DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Combine the diamond-ground carbide cutting plates with a standardised 16 x 16 mm DIN 4971 (ISO 1) shank for dependable, repeatable turning operations; order the turning tool directly via Metav Werkzeuge or ask our consultants if needed. Turning tool DIN 4971 (ISO 1) 16 x 16 mm, carbide P25/P30 — Werner Wilke A turning tool DIN 4971 (ISO 1) 16 x 16 mm designed for right-hand external turning and general lathe applications, fitted with diamond-ground carbide cutting plates for consistent edge performance Diamond-ground carbide cutting plates Straight steel shank for secure clamping DIN 4971 (ISO 1) 16 x 16 mm shank Right-hand cutting direction Consistent cutting quality through carbide grade selection The combination of carbide P25/P30 cutting plates and a precision-ground edge delivers consistent cutting performance and improved wear resistance compared with ungraded tips. The diamond-ground finish on the cutting plates enhances the micro-geometry of the edge, reducing built-up edge and improving surface finish on turned components. This results in fewer rework cycles and steadier process windows in repetitive production, supporting a measurable productivity gain in machining routines. Reliable clamping with a standardised straight shank A straight steel shank to DIN 4971 (ISO 1) means straightforward compatibility with standard external toolholders and cross-slide mounts. The 16 x 16 mm square section provides a positive fit and stable seating, reducing vibration and runout during turning. Because the shank is straight, set-up time is minimised and alignment becomes more repeatable, which supports consistent component tolerances across batch production runs. Practical benefits of right-hand operation explained The tool’s right-hand cutting direction makes it suitable for conventional external turning tasks where the cutting action proceeds from left to right relative to the operator. In practice this means straightforward integration into typical lathe workflows and predictable chip flow. For operators less familiar with terminology: right-hand indicates the orientation of the cutting edge and the direction the tool must travel to remove material efficiently, helping to avoid mistakes during tool selection and setup. Workshop efficiency and low-maintenance handling Fitted with robust carbide plates and a hardened steel shank, this tool emphasises durability and low-maintenance handling. The solid construction and precision-ground cutting surfaces reduce the need for frequent tool changes and support longer uninterrupted runs. For procurement and workshop managers, the resulting stability helps reduce tooling inventory churn and supports leaner production planning without sacrificing cutting performance. For personalised machining guidance or to secure dependable supply, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the turning tool and compatible toolholders Technical data Article number: 4118601152NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning tool Label: Drehmeißel DIN 4971ISO1 16x16mm HM P25/P30 re. ger. Wilke Numbers / Core technical data Shank cross-section: 16 x 16 mm Overall length: 110 mm Standard: DIN 4971 (ISO 1) Cutting direction: Right-hand Material (cutting plates): Carbide P25/P30 Form: Straight Special features Steel shank with diamond-ground carbide cutting plates Straight design for standard toolholders Compatible with ISO 1 / DIN 4971 holders Robust construction for repetitive turning tasks FAQ What is the shank size and standard of this lathe tool? The turning tool is supplied with a 16 x 16 mm square shank conforming to DIN 4971 (ISO 1), ensuring compatibility with standard external toolholders. Which carbide grade is fitted to the cutting plates? The cutting plates are made from carbide P25/P30, offering a balance of toughness and wear resistance suitable for general turning operations. Is this tool suitable for left-hand turning? No, this item is specified as right-hand cutting; left-hand operations require a corresponding left-hand tool geometry. How does the diamond-ground finish affect performance? The diamond-ground finish refines the cutting edge micro-geometry, improving surface finish and reducing built-up edge, which supports longer tool life and more consistent results. What is the article number for ordering and reference? The article number for this turning tool is 4118601152NW, which can be used when enquiring with Metav Werkzeuge or internal purchasing systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16x16mm Carbide Turning Tool Bent Left-Hand DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a robust combination of carbide P25/P30 cutting plates, a bent profile for improved chip control and a rigid 16 x 16 mm shank to maintain stable turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. Turning tool DIN 4972 (ISO 2) – 16 x 16 mm, Carbide P25/P30, Left-hand, Bent (Wilke) The Turning tool DIN 4972 (ISO 2) is a left-hand, bent lathe tool designed for precise external turning and reliable chip guidance in industrial and workshop environments Carbide P25/P30 cutting insert Bent profile for improved chip control Cross-section 16 x 16 mm shank Left-hand, compliant with DIN 4972 (ISO 2) Faster, more consistent turning through optimised carbide geometry Equipped with carbide P25/P30, the tool balances wear resistance and toughness to support steady cutting performance under varied loads. The combination of a compact 16 x 16 mm shank and an overall length of 110 mm reduces unwanted flex and vibration, which directly improves dimensional consistency and surface finish on turned parts. For manufacturers seeking reproducible cycle times, the hardened cutting plates and precise geometry reduce rework and help streamline production planning. Improved chip control and stability for reliable finishes The bent profile is specifically shaped to influence chip flow and contact angles, helping to evacuate swarf cleanly and prevent build-up on the cutting edge. A steel shank fitted with diamond-ground carbide cutting plates provides a secure mounting for the insert and promotes thermal stability during continuous use. These features combine to lower the risk of chatter and to produce a smoother component face, which is particularly beneficial in batch production and precision repair work. Practical fit for workshop and machine tool setups Designed according to DIN 4972 (ISO 2) standards, the turning implement integrates easily into common tool posts and toolholders used in turning centres and conventional lathes. The left-hand cutting direction caters for turning operations where the tool approaches from the workpiece’s right-hand side. Its compact geometry and standardised interfaces make it suitable for both retrofit and new-tool setups, enabling faster tool changes and predictable machine set-up times. Simple maintenance, spare-part logistics and packaging Cutting plates are replaceable, allowing maintenance teams to restore cutting performance without replacing the entire holder. The unit is supplied in a pack of 5, facilitating stock control and minimising downtime for shops that rotate tools frequently. With a clear article reference and standard dimensions, procurement can be planned reliably and integrated into existing inventory systems to maintain continuous production flow. For tailored recommendations or to arrange procurement through Metav Werkzeuge, please contact our team with the SKU 4118605602NW for fast, expert assistance. Technical data Article number: 4118605602NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning tool Label: Drehmeißel DIN 4972ISO2 16x16mm HM P25/P30 li. geb. Wilke Packaging unit: 5 Facts Cross-section: 16 x 16 mm Overall length: 110 mm Special features Material: Carbide P25/P30 Bent profile Left-hand cutting direction Steel shank with diamond-ground carbide cutting plates Compliant with DIN 4972 (ISO 2) FAQ What materials is this turning tool intended for? The turning tool with carbide P25/P30 is designed for general external turning applications; selection of the correct insert grade and cutting data should be matched to the workpiece material for optimal results. How does the bent profile affect chip control? The bent profile alters the contact angle and helps direct chips away from the cutting zone, improving evacuation and reducing the likelihood of re-cutting or edge build-up during extended passes. Is the insert replaceable and how is the tool supplied? The tool is supplied as a holder fitted with diamond-ground carbide cutting plates and is delivered in a pack of 5; worn plates can be replaced to restore cutting performance. Which standard does the tool conform to and why is that important? Compliance with DIN 4972 (ISO 2) ensures compatibility with standard toolholders and predictable mounting geometry, simplifying integration into existing lathe setups. What does the left-hand cutting direction mean for application? Left-hand cutting indicates the tool is intended to cut when the workpiece rotation and tool feed require a left-handed approach; it is suited to operations where the tool engages the workpiece from the right-hand side. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 x 20mm Bent Turning Tool Carbide P25/P30 Left-Hand DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of P25/P30 carbide cutting plates, a bent left‑hand geometry, and standardised DIN 4972 (ISO 2) dimensions for consistent turning performance; order the tool directly via Metav Werkzeuge or contact their consultants for application guidance. Wilke bent turning tool DIN 4972 (ISO 2) — 20 x 20 mm, carbide P25/P30, left‑hand Wilke bent turning tool DIN 4972 (ISO 2) 20 x 20 mm P25/P30 is a left‑hand, bent lathe tool intended for demanding turning tasks where access and reliable chip control are required Carbide P25/P30 for high wear resistance Bent shank for improved chip evacuation DIN 4972 (ISO 2) standardised geometry Left‑hand cutting orientation for specialised operations Robust carbide composition for longer service life The tool is equipped with P25/P30 carbide, a grade chosen for a balance of toughness and wear resistance, which supports extended tool life during continuous turning cycles. Diamond‑ground cutting plates reduce friction at the cutting edge and contribute to a consistent surface finish, while the steel shank provides the necessary rigidity for repeatable results. These material choices result in fewer tool changes and less downtime, improving throughput in production environments. Geometry and form for precise left‑hand turning Built to DIN 4972 (ISO 2) dimensions with a 20 x 20 mm cross‑section and a bent profile, the design offers improved access to shoulders and internal contours compared with straight tools. The left‑hand cutting orientation enables operations where the feed and spindle rotation require a left‑hand tool, helping to maintain correct cutting directions and secure chip flow. The overall length of 125 mm balances reach and stiffness, supporting stable cutting at moderate depths of cut. Practical workshop integration and predictable handling This indexable style solution arrives with diamond‑ground carbide plates mounted on a steel shank, ensuring repeatable seating and alignment in standard tool holders compatible with DIN 4972 tooling. The combination of a 20 x 20 mm shank and standardised geometry simplifies tooling setup and replacement cycles, reducing set‑up time. Clear specification of the cutting direction and form supports process planning and inventory management for metalworking shops seeking consistent, industrial‑grade turning tools. Contact Metav Werkzeuge for tailored advice on selecting the correct Wilke bent turning tool and to discuss compatible tool holders or application parameters; Metav Werkzeuge provides expert consultation and shipment from Emmerich to the European workshop. Technical data Article number: 4118605652NW Label: Drehmeißel DIN 4972ISO2 20x20mm HM P25/P30 li. geb. Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning tool Norm: DIN 4972 (ISO 2) Facts Cross‑section: 20 x 20 mm Overall length: 125 mm Cutting direction: left Material: Carbide P25/P30 Packing unit: 5 Special features Bent profile Steel shank with diamond‑ground carbide cutting plates Standardised geometry for compatible tool holders FAQ What materials is this turning tool best suited for? The Wilke bent turning tool with P25/P30 carbide is designed for general steel turning and applications where a combination of wear resistance and toughness is required; actual performance depends on cutting data and workpiece material. Can the carbide plates be reconditioned or indexed? The tool is supplied with diamond‑ground carbide plates mounted on a steel shank; depending on workshop practices, the plates can be replaced to restore cutting geometry and performance. Is the geometry compatible with common tool holders? Yes, the DIN 4972 (ISO 2) conformity and 20 x 20 mm cross‑section ensure compatibility with holders designed for standardised turning tool inserts. What advantages does the bent, left‑hand form provide? The bent shank improves access to shoulders and tight contours, while the left‑hand cutting orientation is required where spindle rotation and feed direction mandate a left‑hand tool for correct machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 x 20mm Turning Tool Carbide P25/P30 Straight DIN 4971 (ISO 1), Right-Hand - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 grade, a rigid 20 x 20 mm cross-section and compatibility with DIN 4971 (ISO 1) for reliable, repeatable turning operations; order directly via Metav Werkzeuge or consult our advisers for application support. Wilke turning tool DIN 4971 (ISO 1) – 20 x 20 mm, carbide P25/P30, right‑hand, straight The Wilke turning tool is a straight, right‑hand lathe toolholder designed for general turning tasks in workshop and industrial environments, compatible with DIN 4971 (ISO 1) tool clamping systems. Carbide grade P25/P30 for durability and performance 20 x 20 mm cross-section for stable clamping Right‑hand straight design for conventional turning Fitted with diamond‑ground carbide cutting plates High stability and standardised compatibility for secure clamping A compact, standardised design ensures reliable clamping in holders compliant with DIN 4971 (ISO 1). The 20 x 20 mm cross-section combines stiffness with compactness, reducing chatter and improving surface finish when paired with suitable tool posts. This configuration benefits setup speed and machine uptime by fitting common lathe toolholders without additional adapters, supporting efficient changeovers and consistent results. Carbide cutting performance tailored for general turning Equipped with Hartmetall P25/P30 carbide cutting plates, the assembly offers a balance between toughness and wear resistance suitable for a wide range of steels and general engineering materials. The diamond‑ground finish on the inserts enhances edge durability and delivers a sharper initial cutting geometry, which translates into steadier cutting forces and longer intervals between dressing or replacement. The specification is aimed at operators seeking dependable tool life under typical workshop feeds and speeds. Practical geometry for everyday machining tasks The straight, right‑hand configuration provides a familiar geometry for conventional turning operations. With an overall length of 125 mm, the toolholder gives adequate reach while maintaining rigidity close to the clamped shank. This geometry supports repeatable results in facing, light profiling and external turning where a robust shank and precise insert seating are essential for dimensional accuracy and surface quality. Ready supply and workshop suitability Supplied as a pack of five, the product suits small series production or stocking for maintenance cycles. The steel shank fitted with carbide plates arrives ready for installation into standard DIN‑compliant holders, reducing setup time. Metav’s procurement and logistics from Emmerich ensure transparent order processing and reliable delivery for workshops and small industrial users looking to consolidate suppliers and simplify inventory management. For precision turning with carbide performance, contact Metav Werkzeuge for advice and fast supply from Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: 4118601202NW Label: Drehmeißel DIN 4971ISO1 20x20mm HM P25/P30 re. ger. Wilke Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH UID: 4118601202NW Facts Cross-section: 20 x 20 mm Overall length: 125 mm Packaging unit: 5 Special features Material: Hartmetall P25/P30 Form: straight Standard: DIN 4971 (ISO 1) Cutting direction: right‑hand Configuration: steel shank fitted with diamond‑ground carbide cutting plates FAQ What materials is the tool suitable for? The Wilke turning tool is specified with carbide P25/P30 cutting plates, making it suitable for general engineering materials such as common steels; compatibility with harder or exotic alloys should be evaluated against cutting parameters and insert wear. How is the tool mounted in a lathe? The tool is made to DIN 4971 (ISO 1) dimensions and is clamped into standard DIN‑compliant tool holders; correct seating and positive clamping ensure repeatable alignment and rigidity. Does the tool come ready to use? Yes, the assembly is supplied with diamond‑ground carbide cutting plates already fitted to the steel shank, allowing immediate installation and use in compatible holders. What advantages do diamond‑ground inserts offer? Diamond‑ground inserts provide a precise cutting edge and improved initial sharpness, resulting in steadier cutting forces and better surface finish for typical workshop turning tasks. Is this tool suitable for high‑volume production? The robust 20 x 20 mm shank and P25/P30 carbide make it a reliable choice for sustained workshop production; for very high volumes or specialised materials, tool selection should be reviewed for optimal lifecycle economics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 x 20mm Turning Tool Carbide P25/P30 Straight Left-Hand DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Benefit from the combination of P25/P30 carbide construction, a compact 20 x 20 mm cross-section and a straight design for reliable left-hand turning in production environments; order this turning tool directly via Metav Werkzeuge or consult our specialists for application advice. Turning tool DIN 4971 (ISO 1) 20 x 20 mm – Carbide P25/P30, left-hand, straight (Wilke) Turning tool DIN 4971 (ISO 1) 20 x 20 mm – Carbide P25/P30, left-hand, straight (Wilke) is a straight, carbide-tipped turning tool designed for standardised workshop turning tasks where repeatable geometry and tool life are priorities Solid carbide P25/P30 cutting tip 20 x 20 mm square cross-section Conforms to DIN 4971 (ISO 1) Straight shank, left-hand cutting Precision and durability for consistent turning results This carbide-tipped turning tool and its P25/P30 grade inserts deliver a robust balance of hardness and toughness, making it suitable for repetitive turning operations. The 20 x 20 mm cross-section provides stable clamping and reduced vibration, which preserves the cutting edge and improves surface finish. Conformity with DIN 4971 (ISO 1) ensures interchangeability with standard toolholders and predictable axial positioning, supporting consistent process control on the shop floor. The result is fewer tool changes and steadier component tolerances. Seamless integration with standard toolholders and workflows Engineered as a straight shank tool with a 125 mm overall length, this tool is straightforward to mount in existing tool posts and turrets that accept ISO 1 turning tools. The adherence to established norms simplifies set-up and inventory management across multiple machines. A steel shank fitted with diamond-ground carbide cutting plates reduces micro-chatter and assists repeatable clamping, so setup times are reduced and production throughput is improved without bespoke adapters or modifications. Practical handling and material versatility Although optimised for general-purpose turning, the carbide composition and insert geometry make the tool suitable for a range of steel machining tasks in day-to-day workshop use. The left-hand cutting direction is clearly indicated, avoiding mix-ups at the workbench and helping plan tool rotation and chip evacuation. Clear item identification and a compact square profile also aid storage and rapid retrieval during job changes, supporting lean production practices and minimising downtime. Why this tool fits a professional workshop For procurement and shop-floor managers looking for reliable, standardised tooling, this product combines the advantages of a hardened cutting tip with the practical benefits of a norm-compliant shank. The diamond-ground carbide plates give consistent edge preparation, which improves surface quality on machined parts and extends service intervals. Where predictability and compatibility with established machine tooling systems matter, this turning tool bridges technical performance with operational simplicity. Contact Metav Werkzeuge for tailored application advice and to confirm availability of the Wilke turning tool; our consultants can advise on compatibility and delivery directly from Emmerich Technical Data Article number: 4118601652NW Label: Drehmeißel DIN 4971ISO1 20x20mm HM P25/P30 li. ger. Wilke Product type: Turning tool Material: Hartmetall P25/P30 Facts Overall length: 125 mm Cross-section: 20 x 20 mm Cutting direction: Left-hand Packing unit: 5 pieces Special features Conforms to DIN 4971 (ISO 1) Straight execution Steel shank with diamond-ground carbide cutting plates Carbide grade P25/P30 FAQ What materials is this turning tool suitable for? The Wilke turning tool fitted with P25/P30 carbide inserts is primarily suited to general steel machining; its carbide composition provides wear resistance appropriate for many workshop steel applications. Is the tool compatible with standard ISO 1 toolholders? Yes, the tool is manufactured to DIN 4971 (ISO 1) dimensions and is intended for direct use in toolholders that accept ISO 1 turning tools. What does left-hand cutting mean for machine setup? Left-hand cutting indicates the orientation of the cutting edge relative to spindle rotation; the tool should be mounted and the programme set accordingly to ensure correct cutting direction. How is the tool supplied and identified? The item is supplied in a packing unit of 5 pieces and is listed under SKU 4118601652NW for straightforward inventory tracking. Can the carbide inserts be reworked or re-sharpened? The diamond-ground carbide cutting plates are prepared for service life and precision; reconditioning depends on workshop practice, but replacement of inserts is the standard approach for maintaining cutting geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 x 25mm Turning Tool Broad Straight Carbide P25/P30, DIN 4976 (ISO 4) - Werner Wilke Zerspanungstechnik GmbH
Combine reliable carbide performance with a standardised DIN interface and a rigid 25 x 25 mm cross-section for steady turning results; take advantage of quick availability via Metav Werkzeuge or consult our specialists for application advice. Wilke Turning Tool (DIN 4976 / ISO 4) 25 x 25 mm — wide, straight, carbide P25/P30 Wilke Turning Tool (DIN 4976 / ISO 4) 25 x 25 mm is a wide, straight-profile lathe cutting tool fitted with diamond-ground carbide inserts and intended for standardised lathe setups where robust, repeatable turning is required *Carbide P25/P30 for high wear resistance *25 x 25 mm cross-section for stable clamping *Diamond-ground carbide inserts fitted *Conforms to DIN 4976 (ISO 4) for standard tooling Reliable cutting life through optimised carbide grade The tool is equipped with P25/P30 carbide, a grade chosen for a balance between toughness and hardness; this combination is effective where prolonged tool life and consistent edge retention are required. The diamond-ground inserts provide a fine, sharp cutting edge that reduces surface roughness and prolongs interval times between regrinds. For workshop managers seeking predictable maintenance cycles, the selection of this carbide grade translates into lower downtime and fewer unexpected tool changes. Rigid geometry for precise set-up and repeatable results With a 25 x 25 mm cross-section and a total length of 140 mm, the design emphasises rigidity and ease of clamping, reducing chatter in medium-duty turning operations. Compliance with DIN 4976 (ISO 4) ensures compatibility with matching tool holders and fixtures, so set-up time is minimised and fixture interchangeability is straightforward. The wide profile contributes to stable contact during cuts, enabling better dimensional control on turned parts and a more consistent surface finish. Practical integration and supply reliability for production The turning cutter is supplied with factory-mounted carbide plates on a steel shank, configured for straight cutting direction, which simplifies inventory management and reduces assembly steps at the machine. Packaged in units of three, the product supports small-batch stocking while enabling quick replenishment. Confidence in continuous supply is underpinned by Metav’s distribution model, which places a quality filter at the European distribution hub in Emmerich and supports predictable delivery to the shop floor. Secure the Wilke P25/P30 wide turning tool via Metav Werkzeuge for consistent workshop performance, or contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com / +49 2822 7131930 for tailored technical advice and swift supply Technical data SKU: 4118625252NW Product type: Turning tool Label: Drehmeißel DIN 4976ISO4 25x25mm HM P25/P30 ger. breit Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Total length: 140 mm Cross-section: 25 x 25 mm Packaging unit: 3 Special features Material: carbide P25/P30 Wide execution Diamond-ground carbide inserts fitted Steel shank with mounted carbide plates Straight cutting direction Conforms to DIN 4976 (ISO 4) FAQ What materials is this turning tool best suited for? The Wilke Turning Tool (DIN 4976 / ISO 4) 25 x 25 mm is furnished with P25/P30 carbide, a grade commonly used for reliable performance in general turning tasks; its construction is aimed at broad workshop use rather than specialised exotic alloys. Is the tool compatible with standard DIN holders? Yes, compliance with DIN 4976 (ISO 4) means the cutter fits standard holders designed to that interface, allowing straightforward integration into existing tool posts and clamping systems. How does the wide profile benefit machining operations? The wide profile increases contact stability between the insert and workpiece, which reduces vibration and improves dimensional stability and surface finish during turning operations. Are the carbide plates replaceable or mounted permanently? The product is supplied with diamond-ground carbide inserts fitted on a steel shank; replacement or refurbishment can be carried out according to workshop practice for tools of this configuration. What is the delivered quantity per package? The item is supplied in a packaging unit of 3, enabling small-batch stocking and straightforward replenishment planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 x 25mm Turning Tool, Carbide P25/P30 Bent Left, DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Combine the robustness of solid carbide P25/P30 with a bent DIN 4972 (ISO 2) geometry and a left-hand cutting direction for dependable, repeatable turning operations; order this tool directly via Metav Werkzeuge or consult our specialists for application advice. Drehmeißel (bent) – 25 x 25 mm, solid carbide P25/P30, left-hand by Werner Wilke Zerspanungstechnik Drehmeißel DIN 4972ISO2 25x25mm HM P25/P30 li. geb. Wilke is a bent turning tool designed for precise metalcutting tasks where clearance and secure chip flow are essential Solid carbide P25/P30 grade Bent geometry to DIN 4972 (ISO 2) Left-hand cutting direction 25 x 25 mm cross-section Precise cutting performance for stable production The bent turning tool delivers consistent dimensional accuracy thanks to its solid carbide construction in P25/P30 grade. The combination of a rigid steel shank and diamond-ground carbide inserts reduces vibration and improves tool life, which supports stable cycle times and consistent surface finish. The left-hand cutting orientation suits specific lathe setups and reversing operations; the standardised geometry to DIN 4972 (ISO 2) ensures predictable engagement angles and compatibility with holders designed to this norm. These characteristics translate directly into fewer rejects and more predictable throughput for production-focused workshops. Space-saving geometry with reliable chip management The bent design provides increased clearance between the toolholder and the workpiece, enabling machining in confined setups and near shoulders without compromising accessibility. The 25 x 25 mm cross-section balances stiffness with adaptability to common toolholders, while the overall length of 140 mm is dimensioned for secure clamping and optimal reach. Diamond-ground cutting faces promote uniform chip formation and ease finishing, reducing the need for downstream rework. For operations that demand repeatable dimensions and straightforward handling, this geometry reduces setup time and supports uninterrupted machining sequences. Practical handling, maintenance and application flexibility The tool arrives with pre-mounted carbide cutting plates on a steel shank, simplifying installation and replacement during tool changes. The robust carbide grade resists wear in many general turning tasks; the bent execution assists in avoiding collisions and improving operator sightlines to the cutting zone. Left-hand cutting tools are particularly useful in specialised turning strategies and for reversing feed directions without repositioning the workpiece. Routine inspection of the diamond-ground inserts and secure clamping of the shank will maintain cutting quality and extend service intervals, contributing to lower overall operating costs. Contact Metav Werkzeuge for tailored technical advice or to request detailed compatibility information; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations and procurement options Technical data Article number / SKU: 4118605702NW Product label: Drehmeißel DIN 4972ISO2 25x25mm HM P25/P30 li. geb. Wilke Product type: Turning tool Facts Material: Hartmetall P25/P30 Cross-section: 25 x 25 mm Overall length: 140 mm Cutting direction: Left-hand Form: Bent Standard: DIN 4972 (ISO 2) Special features Steel shank with diamond-ground carbide inserts Bent execution for improved clearance Pre-mounted carbide plates Packaging unit: 3 FAQ What applications is this bent turning tool best suited for? This bent turning tool is designed for general turning operations where clearance is required; the solid carbide P25/P30 construction and diamond-ground inserts make it suitable for consistent finishing and medium-duty cutting tasks. Can the tool be used in standard DIN 4972 toolholders? Yes, the geometry complies with DIN 4972 (ISO 2), so the tool fits holders that accept this standard profile and offers predictable seating and cutting angles. Why choose a left-hand cutting direction? A left-hand cutting direction supports setups where feed and spindle rotation require reverse orientation; the left-hand characteristic of this tool helps avoid repositioning some workpieces or fixtures. How does the carbide grade influence tool life? The P25/P30 carbide grade balances toughness and wear resistance; it offers reliable durability for production runs and contributes to consistent surface quality over extended use. Is the shank configurable or supplied ready-to-fit? The tool is supplied with a steel shank fitted with diamond-ground carbide inserts, ready for mounting in compatible toolholders Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25x16mm Carbide Turning Tool Sharp Tip 80° Straight Cut DIN 4975 - Werner Wilke Zerspanungstechnik GmbH
Take advantage of high wear resistance and a standardised shank interface to keep turning operations consistent and downtime low; combined with diamond-ground carbide inserts and an 80° tip angle this tool delivers precise edge definition and predictable cutting behaviour. Order directly via Metav Werkzeuge or request technical advice from our consultants. Turning tool DIN 4975 — 25 x 16 mm, cemented carbide P25/P30, pointed (Werner Wilke) Turning tool DIN 4975 — 25 x 16 mm, cemented carbide P25/P30, pointed (Werner Wilke) is a lathe cutting implement designed for standardised clamping and repeatable performance in workshop and production environments Cemented carbide P25/P30 for durable edges Standardised DIN 4975 shank interface Pointed 80° tip for accurate profiling Steel shank with diamond-ground inserts Longer tool life through high-grade carbide and precise geometry The Turning tool DIN 4975 25 x 16 mm, cemented carbide P25/P30, pointed combines a cemented carbide P25/P30 cutting body with an accurately shaped 80° tip to deliver extended service life and steady edge retention. The diamond-ground finish on the carbide cutting inserts reduces micro-roughness at the cutting edge, which helps to maintain consistent surface finishes and lowers the frequency of tool changes. This results in measurable process stability and reduced tooling costs in repetitive turning tasks. Reliable machine compatibility and accurate clamping Thanks to the DIN 4975 standardised shank and the robust steel shank construction, the tool integrates easily with common turret and tool-holder systems used in industrial lathes. The precise shank geometry minimises run-out and vibration, while the pointed 80° tip angle supports fine profiling and detail cuts. Where toolholders comply with the same standard, fitting is straightforward and repeatability across tool changes is improved, supporting higher first-pass yield rates in production. Practical supply and handling for workshop routines Supplied in a practical pack size, the tool is prepared for straightforward storage and replenishment on the shop floor. The combination of diamond-ground inserts and a solid mounting means predictable wear patterns and easier inspection of edge condition during routine checks. For workshop managers seeking to standardise tooling across machines, the clear specification and standard interface support stock consolidation and simpler inventory control while maintaining machining accuracy. For reliable precision and stocked availability, order through Metav Werkzeuge and contact our team for tailored advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4118620152NW Label: Drehmeißel DIN 4975 25x16mm HM P25/30 ger. spitz Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Dimensions & core data Cross-section: 25 x 16 mm Overall length: 140 mm Tip angle: 80° Standard: DIN 4975 Pack unit: 5 Materials & features Material: cemented carbide P25/P30 Form: pointed Cutting direction: straight Steel shank with diamond-ground carbide cutting inserts Product type: turning tool FAQ What is the shank standard of this turning tool? The turning tool uses the DIN 4975 standardised shank interface for secure and repeatable clamping. Which carbide grade is used for the cutting parts? The tool is equipped with cemented carbide P25/P30, chosen for its wear resistance and dimensional stability. What is the tip geometry and how does it affect results? An 80° tip angle provides defined edge geometry for precise profiling and improved surface finish in detailed turning operations. How is the tool supplied and what is the pack size? The product is supplied in a pack unit of 5, suitable for workshop stocking and scheduled tool replacement. Can this tool be used across different lathe tool holders? Compatibility is supported via the DIN 4975 shank; where holders meet this standard, the tool will fit and maintain repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10 x 10 Right-Hand Bent Carbide Turning Tool DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 cutting inserts, a bent 10 x 10 mm shank and DIN conformity for reliable external turning operations; order directly via Metav Werkzeuge or consult the technical advisers for tool selection and workshop integration. Wilke bent turning tool DIN 4972 (ISO 2), 10 x 10 mm, carbide P25/P30, right-hand The Wilke bent turning tool DIN 4972 (ISO 2) is a right-hand, carbide‑tipped turning tool with a square 10 x 10 mm shank and a bent geometry for precise external turning on conventional and CNC lathes Carbide P25/P30 cutting inserts Bent shank for external turning DIN 4972 (ISO 2) compliant Square shank 10 x 10 mm, 90 mm overall Consistent, high‑quality cuts through optimised carbide geometry The bent turning tool is equipped with carbide inserts in grade P25/P30, selected for a balanced combination of toughness and wear resistance that supports longer tool life and predictable changeover intervals. The diamond-ground cutting faces ensure a defined cutting edge, which reduces vibration and produces a consistent surface finish on turned parts. For production environments where cycle time and repeatability matter, the tool’s geometry contributes to shorter setup times and fewer rejected parts thanks to repeatable cutting performance. Secure clamping and vibration suppression for better surface results The square 10 x 10 mm shank and 90 mm overall length deliver firm seating in standard tool holders, improving rigidity and minimising chatter during cutting. The bent profile offers improved tool access for external contours and reduces interference with the workpiece or fixture, allowing deeper engagement where required. Combined rigidity and the right-hand cutting orientation translate into better stability, reduced tool deflection and an enhanced surface finish, which is particularly relevant for small-batch and jobbing workshops aiming to raise first‑pass yield. Standardised dimensions for fast replacement and workshop compatibility Compliance with DIN 4972 (ISO 2) means straightforward interchangeability with holders and fixtures made to the same standard, simplifying inventory management and reducing downtime when inserts or tools are changed. The tool’s construction—a steel shank fitted with carbide inserts—permits economical re‑use of shanks where applicable and fast replacement of the cutting element. For procurement and planning, the tool’s standard form factor supports modular tooling strategies and keeps fixture redesign to a minimum. Practical integration and procurement for production environments Supplied in a pack of 5, the tool balances stock availability with economical replenishment cycles; the compact format supports just‑in‑time restocking or small batch workshops. The article is listed as SKU 4118605052NW, enabling straightforward ordering and traceability. For technical clarifications or to confirm suitability for a specific turning task, enquiries can be directed to Metav Werkzeuge’s advisers, who provide assistance on tool selection and workshop integration without obligation. The emphasis remains on reliable supply and consistent precision from a single trusted source. Contact Metav Werkzeuge for procurement advice and technical matching to ensure the correct bent turning tool and inserts for the application Technical data Article number: 4118605052NW Product type: Turning tool Material: Carbide P25/P30 Shape: bent Standard: DIN 4972 (ISO 2) Direction: right-hand Overall length: 90 mm Cross-section: 10 x 10 mm Packaging unit: 5 Manufacturer (as stated): Werner Wilke Zerspanungstechnik GmbH Core specifications Overall length: 90 mm Cross-section: 10 x 10 mm Packaging unit: 5 Features & construction Steel shank with diamond-ground carbide inserts Carbide grade P25/P30 Bent design for improved access Right-hand cutting orientation Compliant with DIN 4972 (ISO 2) FAQ What material is recommended for this turning tool? The Wilke bent turning tool is supplied with P25/P30 carbide inserts; this grade offers a balance of wear resistance and toughness suitable for a wide range of general turning tasks. Is the tool compatible with standard DIN 4972 holders? Yes. Compliance with DIN 4972 (ISO 2) ensures compatibility with holders and fixtures manufactured to the same standard for straightforward interchange. What are the shank dimensions and overall length? The shank measures 10 x 10 mm and the overall length is 90 mm, as listed under SKU 4118605052NW for inventory and ordering. How is the turning tool delivered and in what quantity? The item is supplied in a pack of 5, which supports economical stock management and timely replacement. Can the carbide inserts be reconditioned or replaced separately? The tool features carbide inserts mounted on a steel shank; inserts are replaceable where the tool design permits, which reduces waste and keeps operating costs predictable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10 x 10 Straight Carbide Turning Tool Wide DIN 4976 (ISO 4) - Werner Wilke Zerspanungstechnik GmbH
Benefit from a combination of carbide P25/P30 wear resistance, a broad 10 x 10 mm cross section for stable cuts and conformity to DIN 4976 (ISO 4) for reliable interchangeability; order the tool directly via Metav Werkzeuge or ask the consultants for application advice. Wilke turning tool DIN 4976 (ISO 4) – 10 x 10 mm, Carbide P25/P30 A Wilke turning tool built for precise external turning tasks with a broad profile and diamond‑ground carbide cutting tips for consistent surface quality. Carbide P25/P30 for reliable wear resistance Broad 10 x 10 mm cross section for stability Conforms to DIN 4976 (ISO 4) for standardised use Steel shank with diamond‑ground carbide tips Consistent cutting performance for industrial turning The combination of carbide P25/P30 and a broad 10 x 10 mm cross section delivers stable cutting behaviour and extended tool life in repetitive production tasks. The selected carbide grade offers a balanced microstructure that promotes wear resistance while maintaining toughness under interrupted cutting. This results in fewer tool changes and more predictable cycle times, supporting a rational improvement in productivity and process reliability. Stable set‑up and straightforward integration into toolholders With a 90 mm overall length and a straight cutting design on a broad profile, the tool simplifies clamping and alignment in common turning toolholders. The robust cross section reduces chatter and improves dimensional consistency during external turning operations. The steel shank, fitted with diamond‑ground carbide cutting tips, ensures repeatable seating and ease of clamping, helping to reduce set‑up time and improve first‑pass yield in series production. Compliant form and exchangeability for workshop efficiency Manufactured to DIN 4976 (ISO 4) dimensions, the tool supports straightforward interchangeability across standard tool systems and fixtures. Conformity to the norm reduces the risk of incompatibility and streamlines inventory management. The straight cutting orientation and broad execution are particularly suited to tasks requiring stable, repeatable external profiling where form accuracy and surface finish are priorities. For reliable carbide performance and standardised workshop integration order via Metav Werkzeuge or consult Metav’s specialists for selection support Technical data Article number: 4118625052NW Label: Drehmeißel DIN 4976ISO4 10x10mm HM P25/P30 ger. breit Wilke Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH UID: 4118625052NW Data Overall length: 90 mm Cross section: 10 x 10 mm Packaging unit: 5 Special features Material: Carbide P25/P30 Form: broad Cutting direction: straight Standard: DIN 4976 (ISO 4) Steel shank fitted with diamond‑ground carbide cutting inserts FAQ What materials is the Wilke turning tool suitable for? The Wilke turning tool is supplied with carbide P25/P30 tips; this grade is chosen for general turning tasks where a balance of wear resistance and toughness is required. Does the tool fit standard DIN 4976 toolholders? Yes, the turning tool complies with DIN 4976 (ISO 4) dimensions and is designed for compatibility with standard holders matching that format. What are the dimensions and length of the tool? The tool has a 10 x 10 mm cross section and an overall length of 90 mm, as specified on SKU 4118625052NW. What distinguishes the diamond‑ground tips? Diamond‑ground carbide tips provide a precise cutting edge finish and consistent geometry, supporting improved surface quality and repeatable cutting performance. Is this a straight or indexable cutting geometry? This item is supplied in a straight cutting orientation with carbide cutting tips mounted on a steel shank. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com