125mm 20 x 20 Indexable Face Turning Tool Carbide P25/P30, Offset, DIN 4977 (ISO 5) - Werner Wilke Zerspanungstechnik GmbH
Achieve repeatable turning with carbide P25/P30 cutting edges, a compact 20 x 20 mm cross-section and an offset shank that improves clearance in tight set-ups. Order the face-turning tool directly via Metav Werkzeuge or ask our consultants if needed. Face-turning tool DIN 4977 (ISO 5) 20 x 20 mm – Carbide P25/P30 (Werner Wilke) The Face-turning tool DIN 4977 (ISO 5) 20 x 20 mm delivers precise right-hand face turning for industrial steel applications with a steel shank fitted with diamond-ground carbide cutting plates Carbide P25/P30 grade for steel turning Offset shank for improved clearance Complies with DIN 4977 (ISO 5) Right-hand cutting, 20 x 20 mm cross-section Consistent metal removal with proven carbide grades The tool is built around carbide P25/P30, a grade selected for stable performance in general steel machining. The combination of diamond-ground carbide cutting plates and a robust steel shank yields a reliable cutting edge that holds form under repeated passes. This construction reduces the frequency of regrinding and tool changes, improving uptime on production lathes. The result is a predictable machining process with consistent surface quality and dimensional control Geometry and handling designed for confined operations The offset shank and compact 20 x 20 mm cross-section permit access to faces and shoulders where larger tooling would collide with fixtures. The design minimises interference while maintaining the rigidity required for face operations. Right-hand cutting geometry ensures correct chip flow and stable contact during standard clockwise spindle rotation, supporting efficient cycle times and fewer clearance adjustments for operators working with turned parts Standards, compatibility and practical benefits Compliance with DIN 4977 (ISO 5) simplifies specification and replacement across tool-holding systems. The overall length of 125 mm provides a balance between reach and stiffness for common workshop set-ups. Fitted inserts deliver fast indexable replacement in case of wear, keeping maintenance straightforward. The face-turning tool by Werner Wilke is suitable where robust, repeatable finishing and roughing on steel components are required, combining standardised dimensions with industry-grade P25/P30 performance For secure procurement and application guidance on this Wilke face-turning tool, contact Metav Werkzeuge for a tailored recommendation or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4118630102NW Label: Stirndrehmeißel DIN 4977ISO5 20x20mm HM P25/P30 re. Wilke Product type: Face-turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH UID: 4118630102NW Facts Overall length: 125 mm Cross-section: 20 x 20 mm Standard: DIN 4977 (ISO 5) Packaging unit: 5 Special features Material: Carbide P25/P30 Form: Offset (abgesetzt) Cutting direction: Right-hand Steel shank with diamond-ground carbide cutting plates Designed for industrial face turning applications FAQ What materials is this tool intended to machine? The face-turning tool with carbide P25/P30 is designed primarily for steel machining; its carbide grade delivers a balance of toughness and wear resistance suited to typical steel turning tasks. Is the tool compatible with standard DIN 4977 tool holders? Yes, the tool is specified to DIN 4977 (ISO 5), ensuring compatibility with holders and fixtures that accept this standard form and dimensions. How is wear managed on the cutting edges? Wear is managed by indexed carbide cutting plates; when one edge is worn the insert can be rotated or replaced, maintaining cutting performance without full-tool replacement. What does the offset (abgesetzt) form provide in practice? The offset form increases clearance between the shank and the workpiece or fixture, enabling operations in confined spaces while retaining rigidity for face turning. Which SKU identifies this specific variant? This variant is identified as SKU 4118630102NW, the Wilke right-hand face-turning tool with a 20 x 20 mm cross-section. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 x 16mm Facing Tool Carbide P25/P30, Offset, DIN 4977 (ISO 5) - Werner Wilke Zerspanungstechnik GmbH
Combine the carbide P25/P30 cutting plates with a rigid 16 x 16 mm stepped shank and DIN 4977 conformity for consistent turning results; order the tool directly via Metav Werkzeuge or consult our technical advisors for application matching. Face turning tool (DIN 4977 / ISO 5) — 16 x 16 mm, Carbide P25/P30 by Werner Wilke Face turning tool fitted with diamond-ground carbide cutting plates, intended for right-hand lathe operations and compatible with DIN 4977 (ISO 5) toolholders Carbide P25/P30 cutting plates 16 x 16 mm shank cross-section 110 mm overall length Right-hand cutting, DIN 4977 compliant Precision and material performance for repeatable finishing The carbide P25/P30 plates provide a reliable balance between wear resistance and toughness, making this insert-equipped turning tool suitable for a broad range of steel applications. The plates are diamond-ground to a fine finish, which reduces built-up edge and improves surface quality on workpieces. This construction enhances repeatability in production environments and reduces downtime for regrinding, resulting in more predictable cycle times and consistent part quality. Stable clamping and compatibility with standard toolholders A 16 x 16 mm stepped shank and an overall length of 110 mm ensure secure clamping and good rigidity when used in standard DIN 4977 (ISO 5) toolholders. The stepped design minimises vibration and supports dimensional accuracy during face-turning operations. The tool’s right-hand cutting orientation suits common lathe setups; compatibility with established standards simplifies integration into existing tooling systems and shortens setup time on the shop floor. Economical handling and workshop advantages Equipped with carbide plates mounted on a robust steel shank, the tool lowers lifetime costs because the cutting elements are the wearing parts and are straightforward to service. The combination of a hardened carbide grade and precision mounting results in stable cutting performance under repetitive loads. The tool is particularly useful for workshops seeking a compact, standardised face-turning solution that delivers precision, easy handling and reliable results across small- and medium-batch production. Contact Metav Werkzeuge for application advice or to specify the right variant for machining requirements; Metav’s experts in Emmerich will assist with technical matching and supply logistics Technical data Article number: 4118630052NW Label: Stirndrehmeißel DIN 4977ISO5 16x16mm HM P25/P30 re. Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Total length: 110 mm Cross-section: 16 x 16 mm Standard: DIN 4977 (ISO 5) Packaging unit: 5 Special features Material: Carbide P25/P30 Form: stepped shank Cutting direction: right-hand Steel shank fitted with diamond-ground carbide cutting plates FAQ What materials is this face turning tool intended for? The face turning tool is supplied with carbide P25/P30 plates, making it suitable primarily for a wide range of steels and general turning tasks where a balance of wear resistance and cutting toughness is required. Is the tool compatible with common toolholders? Yes, the tool complies with DIN 4977 (ISO 5) and is designed to fit standard holders that accept a 16 x 16 mm shank, enabling straightforward integration into existing setups. Can the carbide plates be replaced? The steel shank is fitted with diamond-ground carbide cutting plates; the design facilitates replacement of the cutting elements to restore cutting performance without replacing the entire holder. Which cutting direction does the tool support? This variant is configured for right-hand cutting, suitable for conventional lathe orientations where right-hand tools are required. What are the practical benefits in a production environment? The combination of a rigid 16 x 16 mm stepped shank, precise carbide plates and DIN 4977 standardisation delivers improved stability, reduced vibration and consistent surface finish, which helps maintain throughput and part quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25x25mm Face Turning Tool Carbide P25/P30 Offset Right-Hand, DIN 4977 (ISO 5) - Werner Wilke Zerspanungstechnik GmbH
Benefit from a robust combination of a 25 x 25 mm square shank, P25/P30 carbide cutting edges and a stepped 140 mm steel holder for dependable right-hand face turning — order via Metav Werkzeuge or consult our specialists for application advice. Wilke face turning tool – 25 x 25 mm, carbide P25/P30, DIN 4977 (ISO 5) The Wilke face turning tool is a stepped, right-hand turning holder designed for precision external and face turning to DIN 4977 (ISO 5) standards, fitted with diamond-ground carbide cutting plates for stable chip control Carbide P25/P30 cutting edges 25 x 25 mm square shank Stepped steel shank, 140 mm overall length Right-hand cutting orientation, DIN 4977 compliant Consistent cutting performance for small-series and production runs Equipped with P25/P30 carbide inserts, this turning holder delivers a balance between wear resistance and toughness, which minimises tool changes and supports longer uninterrupted production cycles. The diamond-ground cutting plates provide defined cutting geometry for repeatable edge life and predictable surface finish, translating into reduced setup time and fewer rejects during serial turning operations. Stable clamping and straightforward setup reduce downtime The 25 x 25 mm square shank and stepped design ensure secure mounting in standard toolholders while improving accessibility for facing operations. The right-hand cutting orientation, combined with the steel shank construction, produces reliable rigidity and vibration damping — advantages that directly reduce chatter and improve dimensional consistency on turned parts. For workshops transitioning from general-purpose tooling, the simplified clamping geometry enables fast integration into existing tool posts. Clear material capability and standard conformity for process planning The holder is supplied to DIN 4977 (ISO 5), guiding compatibility with established turning practices and inspection routines. Material designation carbide P25/P30 indicates suitability for a wide range of steels and common non-ferrous materials where a balance of edge stability and toughness is required. The product’s design — a steel shank fitted with diamond-ground carbide plates — supports predictable cutting behaviour; technical specifications assist planning for cutting data and replacement inserts in production documentation. Discuss application requirements with Metav Werkzeuge to ensure the selected Wilke face turning tool matches the intended machining tasks; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for precise guidance Technical data Article number: 4118630152NW Designation: Stirndrehmeißel (face turning tool) Brand: Werner Wilke Zerspanungstechnik GmbH Form: abgesetzt Specifications Standard: DIN 4977 (ISO 5) Overall length: 140 mm Cross-section: 25 x 25 mm Cutting direction: right-hand Packaging unit: 3 Features & materials Material: carbide P25/P30 Shank: steel shank with diamond-ground carbide cutting plates Additional info: stepped design, DIN 4977 compliance FAQ What materials can be machined with this face turning tool? The Wilke face turning tool is equipped with P25/P30 carbide plates and is suitable for a broad range of steels and common non-ferrous materials; specific limits should be confirmed against the intended workpiece material and cutting data. Is the tool supplied ready to fit in a standard toolholder? Yes, the stepped 25 x 25 mm shank and 140 mm overall length are intended for standard holders that accept square shanks and the tool is prepared for immediate mounting. Does the tool comply with recognised standards? The turning holder is manufactured to DIN 4977 (ISO 5), facilitating integration into established process documentation and quality checks. How are the carbide plates finished and why does this matter? The cutting plates are diamond-ground, which ensures precise cutting geometry and consistent edge condition, improving surface quality and extending predictable tool life. What is the packing unit for ordering and how is it delivered? The product is supplied in a packaging unit of 3; delivery and logistical arrangements can be coordinated through Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com