100mm External Threading Tool 10x10mm Carbide P25/P30 60° Right-Hand WN282 - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 reliability and a precise 60° profile for consistent external thread turning; the compact 10 x 10 mm cross-section and 100 mm length ensure stable mounting and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for compatibility details. External thread turning tool 10 x 10 mm, carbide P25/P30, 60° (right-hand) – Werner Wilke External thread turning tool 10 x 10 mm, carbide P25/P30 for right-hand 60° thread profiles on lathes and turning centres Carbide grade P25/P30 for wear resistance 60° profile for standard external threads 10 x 10 mm compact cross-section Diamond-ground carbide cutting plates Consistent cutting performance and extended tool life The combination of carbide P25/P30 and diamond-ground cutting plates delivers a robust mix of hardness and toughness that preserves the cutting edge under repeated use. This construction reduces flank wear and maintains a precise thread form over longer runs, which translates into fewer tool changes and more predictable cycle times. The 60° geometry ensures compatibility with ISO metric and many standard thread forms, helping to uphold tolerance requirements without frequent rework. Stable clamping and accurate thread form control A compact 10 x 10 mm cross-section paired with an overall length of 100 mm provides a stable mounting geometry in standard toolholders and shank adaptors. The steel shank fitted with carbide inserts minimises vibration and improves surface finish by keeping the insert rigid during cut entry and exit. The right-hand cutting direction is optimised for conventional turning operations, offering reliable chipflow and reduced burr formation when used in appropriate turning setups. Practical application and handling benefits Designed for straightforward integration into turning processes, the insert is identified under the WN282 standard for quick selection and replacement. The diamond-ground carbide faces facilitate fine finishing passes and consistent dimensional control of external threads. For workshops aiming to streamline production, this tool supports efficient changeovers and repeatable results, making it suitable for batch production and precision work on conventional and CNC lathes. Contact Metav Werkzeuge today for a compatibility check and fast supply from Emmerich — our Metav IndustryLine specialists will confirm suitability for standard 60° external thread turning and advise on toolholder matching Technical data SKU: 4118650202NW Standard: WN282 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: External thread turning tool Packaging unit: 5 Facts Overall length: 100 mm Cross-section: 10 x 10 mm Tip angle: 60° Cutting direction: right Design / special features Carbide P25/P30 Steel shank with diamond-ground carbide cutting plates 60° thread profile FAQ What materials is this tool intended for? The External thread turning tool 10 x 10 mm, carbide P25/P30 is manufactured with P25/P30 carbide, which provides a good balance of wear resistance and toughness for general turning tasks; specific material suitability should be verified for very hard or specialised alloys. Is the 60° geometry suitable for metric threads? Yes, the 60° profile corresponds to standard metric and many unified thread forms, making the tool appropriate for producing common external threads on lathes. How is the tool identified for reordering? Reorder using SKU 4118650202NW or the WN282 designation; both identifiers are referenced for the External thread turning tool and simplify stock replenishment. Can the carbide inserts be re-sharpened or replaced? The tool features diamond-ground carbide cutting plates mounted on a steel shank; the cutting plates are intended to be replaced rather than resharpened in most workshop scenarios to preserve geometry and thread accuracy. What is the recommended use case for this tool? This product is aimed at external thread turning on conventional and CNC lathes where a compact 10 x 10 mm tool and stable, repeatable 60° thread form are required; it is suited to batch work and production environments seeking consistent results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm 12 x 12 External Thread Turning Tool Carbide P25/P30 60° Right-Hand WN282 - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the 60° thread profile, the carbide P25/P30 cutting tips and the stable 12 x 12 mm shank to achieve consistent external threads with minimal rework; order directly via Metav Werkzeuge or contact the sales team for precise compatibility advice. External thread turning tool 12 x 12 mm, carbide P25/P30, right-hand, 60° – Wilke The External thread turning tool 12 x 12 mm is designed for reliable external thread production in CNC and lathe operations, combining a rigid steel shank with diamond-ground carbide cutting plates for high repeatability. 12 x 12 mm square shank Carbide P25/P30 cutting tips 60° thread profile angle Right-hand cutting direction Consistent 60° thread form for less rework The 60° profile, executed by diamond-ground carbide tips, ensures a dependable thread geometry that reduces the need for subsequent corrections. The combination of carbide P25/P30 and precise tip finishing delivers repeatable flank accuracy and a uniform surface quality on each pass. This focused engineering reduces scrap rates and streamlines inspection routines, making the tool a practical choice where thread conformity matters for assembly or quality assurance. Rigid design that supports stable turning cycles A 12 x 12 mm cross-section and a total length of 110 mm provide a compact, stiff package that minimises chatter during threading operations. The tool is supplied as a steel shank fitted with mounted carbide cutting plates, which gives a stable interface between holder and cutting edge. The compact profile suits standard tool holders accepting a 12 x 12 mm square shank and supports steady cutting conditions that help maintain cycle times in production environments. Low-maintenance cutting tips and predictable service life Mounted carbide cutting plates, diamond-ground for accurate geometry, are selected for wear resistance and consistent cutting behaviour. The right-hand cutting direction matches conventional lathe threading cycles and supports straightforward setup. Regular inspection of the cutting plates and routine dressing where applicable extend productive life and reduce unplanned stoppages. The design emphasises uncomplicated handling and quick visual checks rather than complex maintenance procedures. Specification clarity and traceability for production planning Identified under norm WN282 and supplied in packaging units of 5, the tool is labelled and traceable for stock control and production planning. The compact specification and clear labelling facilitate procurement and ensure the tool integrates smoothly into existing tooling inventories. Purchasing via an established distributor offers the added benefit of consistent supply and documentation to support quality records and manufacturing audits. For procurement and technical enquiries regarding the Wilke WN282 external thread turning tool, contact Metav Werkzeuge for precise compatibility checks and ordering support Technical data Article number: 4118650252NW Type designation / norm: WN282 Product label: Außengewindedrehmeißel 12x12mm HM P25/P30 re. 60° Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Overall length: 110 mm Cross-section: 12 x 12 mm Thread profile / tip angle: 60° Cutting direction: right-hand Packaging unit: 5 Special features Material: carbide P25/P30 Steel shank with mounted diamond-ground carbide cutting plates Execution: 60° thread profile FAQ Is this tool suitable for standard 12 x 12 mm tool holders? The tool’s 12 x 12 mm cross-section is intended for holders that accept a 12 x 12 mm square shank; the steel shank provides secure clamping for stable threading. What is the thread angle delivered by the cutting tips? The mounted carbide cutting plates are finished for a 60° thread profile in line with norm WN282. How is the cutting direction defined for this tool? This version is specified as right-hand cutting and is intended for conventional right-hand threading operations on lathes and CNC turning centres. Are the carbide plates replaceable or permanently mounted? The tool is supplied as a steel shank fitted with mounted carbide cutting plates; consult Metav Werkzeuge for details on spare parts and replacement options. How is the product delivered for inventory and planning? The article is supplied in a packaging unit of 5, facilitating stock management and orderly replenishment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm External Threading Tool 20 x 20 Carbide P25/P30 60° Right-Hand WN282 - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the durable carbide P25/P30 cutting edges and the precise 60° profile for consistent external threads; the robust 20 x 20 mm shank ensures stable mounting and reliable repeatability in series production. Order directly via Metav Werkzeuge or consult the team for application-specific advice. External thread turning tool 20 x 20 mm, carbide P25/P30 – Werner Wilke The External thread turning tool 20 x 20 mm HM P25/P30 is a right‑hand, 60° profile threading solution for precision external thread turning on shaft workpieces, mounted on a solid steel shank with diamond‑ground carbide inserts. Carbide P25/P30 cutting edges 60° thread profile for exact forms 20 x 20 mm steel shank Diamond‑ground carbide inserts Accurate 60° profile for repeatable thread geometry The 60° profile is central to producing standard external threads with consistent flank geometry, reducing the need for subsequent rework. The tool’s geometry ensures the thread form is generated with high fidelity, which benefits production runs that demand uniformity. Using a defined profile reduces adjustment time at the machine and supports faster first‑part approval. Long tool life and fine surface finish from carbide grades Equipped with carbide P25/P30 cutting edges and diamond‑ground inserts, the tool offers increased wear resistance and a smooth cutting edge that promotes superior surface finish on the thread flanks. The combination of these carbide grades with a precision ground cutting face reduces edge chipping and extends the interval between indexings or insert changes, improving uptime in continuous machining operations. Compact 20 x 20 mm shank for secure clamping and straightforward integration The 20 x 20 mm cross‑section combined with an overall length of 140 mm provides a compact, rigid tooling solution that fits many standard external toolholders. The solid steel shank construction supports stable cutting conditions and minimises vibration during thread generation. Identification to WN282 simplifies integration into existing tooling assemblies and changeover documentation. Right‑hand cutting for standard turning operations and efficient cycle times Designed as a right‑hand cut tool, the turning insert is optimised for conventional lathe feed directions common in production environments. The tool’s configuration supports efficient machining cycles and predictable toolpaths, helping to reduce cycle time per part while maintaining thread accuracy. When paired with consistent setup practices, the tool contributes to repeatable output and lower scrap rates. For application guidance or to place an order referencing WN282, contact Metav Werkzeuge for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4118650352NW Model / Standard: WN282 Product: External thread turning tool Manufacturer (label): Werner Wilke Zerspanungstechnik GmbH Cross-section: 20 x 20 mm Overall length: 140 mm Tip angle: 60° Cutting direction: right Material: Carbide P25/P30 Packaging unit: 5 Facts Cross-section numeric: 20 x 20 Overall length numeric: 140 mm Tip angle numeric: 60° Packaging unit numeric: 5 Special features Steel shank fitted with diamond‑ground carbide inserts 60° thread profile Right‑hand cutting direction Identification: WN282 FAQ What materials is the tool suitable for? The External thread turning tool 20 x 20 mm HM P25/P30 is built with carbide P25/P30 inserts that provide wear resistance suitable for general external threading tasks; material compatibility should be confirmed for specialised alloys. Is the tool compatible with standard toolholders? The 20 x 20 mm shank and WN282 identification mean the tool is compatible with common external turning toolholders designed for 20 x 20 mm shanks. How does the 60° profile affect thread accuracy? A defined 60° profile directly reproduces the thread flank geometry, so the tool supports consistent thread form and reduces the requirement for corrective finishing operations. What are the key benefits of the diamond‑ground inserts? Diamond‑ground inserts deliver a finer cutting edge and improved surface finish on thread flanks, while also enhancing resistance to edge chipping during interrupted cuts. How is the product supplied and what is the packaging unit? The tool is supplied in packaging units of 5 and is clearly identified by SKU 4118650352NW for reordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 x 16mm External Thread Turning Tool 60° Carbide P25/P30, Right-Hand - Werner Wilke Zerspanungstechnik GmbH
Achieve consistent production threads with the combination of carbide P25/P30, a 16 x 16 mm cross section and a 60° tip angle for standard metric forms — order the external thread turning tool directly via Metav Werkzeuge or consult our advisers for installation support. External thread turning tool 16 x 16 mm, carbide P25/P30, right‑hand, 60° – Wilke The External thread turning tool 16 x 16 mm, carbide P25/P30, right‑hand, 60° – Wilke is a right‑hand external threading tool designed for precision thread turning on shafts and turned parts in production environments Carbide P25/P30 grade for extended wear 16 x 16 mm cross section for secure clamping 60° tip angle for standard metric thread geometry Right‑hand cutting direction for conventional lathe set‑ups Consistent wear resistance for continuous production The combination of carbide P25/P30 inserts and diamond‑ground seating ensures predictable tool life and steady performance across production runs. The chosen carbide grade balances hardness and toughness, reducing the frequency of regrinds and downtime. For machining processes where repeatability matters, the tool’s wear characteristics translate directly into fewer interruptions and stable cycle times, supporting higher overall equipment effectiveness and lower per‑part production costs. Accurate thread form and repeatable quality A 60° tip angle provides the standard flank geometry for metric thread profiles, helping to achieve consistent fits and functional threads without additional finishing passes. The diamond‑ground cutting edges maintain their profile for precise flank angles and improved surface finish. As a result, downstream inspection and assembly tolerances are easier to meet, reducing scrap rates and improving first‑pass yield in batch or single‑piece flow production. Robust shank design for secure set‑up and vibration control The 16 x 16 mm cross section gives a compact yet rigid footprint for firm mounting in tool holders, helping to minimise deflection during engagement. The tool is supplied with a steel shank fitted with diamond‑ground carbide inserts, which simplifies insert replacement and maintains alignment. The right‑hand cutting direction matches conventional lathe feeds and set‑ups, enabling straightforward integration into existing tooling systems and quick changeover between operations. Practical use cases and maintenance clarity This external thread turning tool is suited to serial turning operations where consistent thread geometry and predictable tool life are priorities. The modular insert arrangement allows controlled maintenance: replace worn inserts rather than the whole tool body, which reduces consumable costs. Clear identification via the SKU and model facilitates inventory management and reordering in procurement systems for production and maintenance teams. For procurement of Wilke external thread turning tools or tailored technical advice on integrating carbide P25/P30 inserts into an existing workflow, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for competent supply and consultancy. Technical data Article number: 4118650302NW Model: WN282 Name: External thread turning tool 16 x 16 mm, carbide P25/P30, right‑hand, 60° Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: External thread turning tool UID: 4118650302NW Core data Overall length: 125 mm Cross section: 16 x 16 mm Tip angle: 60° Cutting direction: Right‑hand Pack size: 5 Special features Material: Carbide P25/P30 Design: Steel shank with diamond‑ground carbide inserts Execution: 60° tip angle Norm: WN282 FAQ What is the recommended thread form for this tool? The tool produces standard 60° metric thread geometry; the External thread turning tool 16 x 16 mm, carbide P25/P30, right‑hand, 60° – Wilke (SKU 4118650302NW) is set up for conventional metric profiles. Can the inserts be replaced individually? Yes, the tool uses diamond‑ground carbide inserts mounted on a steel shank; inserts can be replaced individually to extend the service life of the holder. Is this tool suitable for conventional lathe feeds? The right‑hand cutting direction matches standard lathe feed directions and is compatible with typical turning set‑ups. How does the 16 x 16 mm cross section affect performance? The 16 x 16 mm cross section offers secure clamping and stiffness, reducing deflection and improving thread accuracy in production environments. What identification should be used when reordering? Use the SKU 4118650302NW and model WN282 when reordering the Wilke external thread turning tool to ensure correct matching of carbide grade and geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm 25 x 25 External Threading Tool Carbide P25/P30 60° Right-Hand WN282 - Werner Wilke Zerspanungstechnik GmbH
Combining a carbide P25/P30 grade with a 60° tip and a rigid 25 x 25 mm cross-section delivers precise, repeatable external threads in production environments; request supply or consulting directly from Metav Werkzeuge for a dependable addition to the tooling kit. External thread turning tool 25 x 25 mm, carbide P25/P30, right-hand, 60° (Wilke) External thread turning tool 25 x 25 mm for precision external threading on lathes and CNC turning centres with a steel shank fitted with diamond-ground carbide inserts Carbide P25/P30 for extended tool life 25 x 25 mm cross-section for rigid set-up 60° tip for ISO metric threads Right-hand cutting for standard lathes High-precision threads through optimised carbide The External thread turning tool 25 x 25 mm uses carbide P25/P30, a grade optimised for a balance of toughness and wear resistance, which reduces flank wear during serial production. The 60° tip conforms to ISO metric threading geometry, enabling consistent profile accuracy and reducing rework. This technical combination supports higher first-pass yields and predictable tool-change intervals, promoting leaner machining cycles and measurable productivity gains. Rigid tool body for consistent repeatability A 25 x 25 mm cross-section and a 160 mm length provide a stiff mounting condition, lowering vibration and improving surface finish on the thread flank. The tool is supplied on a steel shank fitted with diamond-ground inserts, which ensures repeatable seat accuracy and minimal run-out when clamped in standard tool holders. Right-hand cutting orientation matches common lathe stock rotation, simplifying setup and reducing the need for alternative tooling. Seamless integration and reliable sourcing Designed to the WN282 designation, the tool integrates with existing turning tool stations and clamping systems without custom adapters. Supplied as a single unit per packaging, it is suitable for workshop replenishment or targeted replacement in production cells. For technical clarification or compatibility checks, Metav Werkzeuge acts as a precision partner, offering product knowledge and rapid fulfilment from its Emmerich supply hub. For specification guidance or to arrange delivery of the Wilke external thread turning tool, contact Metav Werkzeuge directly for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4118650402NW Name: External thread turning tool 25 x 25 mm HM P25/P30 re. 60° Wilke Product type: External thread turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Overall length: 160 mm Cross-section: 25 x 25 mm Tip angle: 60° Packaging unit: 1 Special features Material: carbide P25/P30 Cutting direction: right-hand Norm: WN282 Steel shank fitted with diamond-ground carbide inserts FAQ What thread form does the tool produce? The tool produces ISO metric thread profiles via its 60° tip geometry; the External thread turning tool 25 x 25 mm is configured for standard external threading. Which materials suit this turning tool? The Wilke carbide grades P25/P30 are optimised for general-purpose turning, particularly for steels and similar alloys where a balance of wear resistance and toughness is required. How is the tool supplied and mounted? The tool is supplied as a single unit (packaging unit 1) on a steel shank; mounting uses a standard toolholder compatible with the WN282 designation. Is the cutting direction compatible with my lathe? This version is right-hand cutting, matching conventional lathe spindle rotation and common fixture setups. What identifies this specific article? Reference the SKU 4118650402NW for ordering and technical queries related to this external thread turning tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com