9mm Quick-Change Insert SES 7mm Square Shank for DIN 374/376 M12, Torque-Limited Safety Clutch - TECWERK
Take advantage of the combination of controlled torque protection and quick-change convenience to reduce tap breakage and increase uptime in the workshop; order the part through Metav Werkzeuge or contact their advisers for application support and matching to other shank sizes. Quick-change insert SES 9 mm x 7 mm Size 2 – TECWERK The Quick-change insert SES 9 mm x 7 mm Size 2 is a compact exchange insert for M12 tapping applications, designed to limit torque and protect taps in production and repair environments. Adjustable safety clutch for torque limitation Reduces risk of tap breakage during threading Torque transmitted via 7 mm square shank Compatible with DIN 374/376 M12 tapping tools Minimise tap breakage with controlled torque transfer The core advantage of this insert is the adjustable safety clutch, which provides torque limitation to protect thread-cutting tools during interrupted or demanding operations. By disengaging at a preset torque, the mechanism reduces the likelihood of tap breakage, lowering scrap rates and maintenance time. For workshops that run mixed batches or repair tasks, this protective function improves process reliability and reduces the frequency of tool changeovers. Fast exchange and reliable drive connection for production speed Designed as a quick-change insert, the component enables rapid replacement of worn or different-size inserts without complex retooling, preserving machine uptime. The torque transmission via the 7 mm square shank ensures a positive mechanical drive connection that resists slippage under load. Compatibility with DIN 374/376 M12 tapping tools makes it straightforward to integrate into existing tapping holders; different shank sizes require the corresponding insert types to maintain correct fit and torque transfer. Defined dimensions for predictable engagement and fit Key dimensions are provided for precise planning and fixture adjustments: L1: 32 mm, L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, D1: 31 mm, with a nominal tool diameter of 9 mm and a 7 mm square drive. These measurements inform how the insert engages with the tapping holder and determine achievable thread depth and clamping clearance. Clear dimensional data supports jig design and helps avoid interference during automated or manual tapping cycles. Built for workshop reliability and straightforward inventorying The unit is supplied as a single-piece pack and suits repair shops and production lines where predictable torque behaviour and quick serviceability matter. The integrated safety clutch not only protects tools but also contributes to consistent process outputs, which is especially valuable when threading on harder or variable materials. For operations seeking to standardise tooling, the SES quick-change format simplifies stockkeeping while maintaining the flexibility to match different shank standards. For application advice or to confirm the correct TECWERK quick-change insert for a specific holder or shank, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 4000832678NW SKU: 4000832678NW Product type: Quick-change insert SES Brand: TECWERK Packaging unit: 1 Dimensions Diameter D: 50 mm Diameter D1: 31 mm Nominal tool diameter: 9 mm Square drive: 7 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm Features & compatibility Adjustable safety clutch for torque limitation Prevents tap breakage Torque transmission via shank square For DIN 374/376 M12 Different inserts required for other shank sizes FAQ What thread sizes is this insert designed for? The SES quick-change insert is specified for use with DIN 374/376 M12 tapping tools and is matched to that standard for reliable engagement. How does the adjustable safety clutch protect taps? The adjustable safety clutch limits torque transmission once the set threshold is reached, which in the SES insert prevents sudden overloads that can cause tap breakage. Is the 7 mm square drive the only available shank size? This particular insert features a 7 mm square drive; other shank sizes require the corresponding SES variants to ensure correct torque transfer and fit. Can this insert be used in automated tapping heads? Yes, the quick-change format and defined dimensions such as L1, L3 and D support integration into automated tapping setups, provided the holder accepts the SES geometry. What is included in the delivery? The product is supplied as a single unit (packaging unit 1) ready for fitting into the matching quick-change holder. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 11 Collet Wrench For ER/ESX Collet Nuts, Hardened Special Steel - TECWERK
Take advantage of secure clamping for ER/ESX collet nuts, the compact mini design and the hardened special steel construction for consistent toolholding and reduced setup times; order or consult with Metav Werkzeuge for procurement and technical advice. Collet Wrench ER Mini No.250K — Compact tool for ER 11 collet nuts (TECWERK) The Collet Wrench ER Mini No.250K is a compact, workshop-ready key designed for the secure tightening of ER/ESX collet nuts in machine tool and toolroom environments. Secure clamping for ER/ESX collet nuts Compatible with ER 11 size Hardened special steel construction Compact mini design for tight spaces Consistent toolholding for reliable production The compact key delivers secure clamping for ER/ESX collet nuts in accordance with DIN 6499, which supports repeatable and dependable toolholding. By ensuring the collet nut is correctly tightened, the wrench helps to reduce runout and vibration during machining, which directly contributes to longer cutter life and more consistent part quality. For production environments where process stability matters, correct clamping reduces rework and machine downtime, improving overall throughput and operational reliability. Robust design that resists wear and corrosion Manufactured from special steel and finished in a blued finish (tempered brown tone), this compact key offers mechanical strength with surface protection against everyday workshop corrosion. The tempering adds toughness to the steel while the blued finish provides a layer of oxidation resistance, making the tool suitable for regular use at the bench or on the machine. The durable construction supports frequent tightening cycles without rapid wear, so maintenance intervals are extended and replacement costs are reduced. Compact form to speed up setups in confined spaces The mini format is intended for accessibility where a full-size spanner would be impractical. The reduced profile improves reach into densely packed toolholders and spindle noses, enabling quicker changeovers and safer handling in tight assemblies. As a simple, purpose-built tool, it integrates seamlessly into existing setup routines and supports faster, more ergonomic clamping operations—helping workshop teams to maintain pace with production demands while keeping operations safe and repeatable. Contact Metav Werkzeuge for tailored advice on fitting and delivery of the TECWERK Collet Wrench ER Mini No.250K from our Emmerich quality hub Technical Data Article number: 4000605373NW Designation: Collet Wrench ER Mini No.250K Product type: Collet wrench Core data Size: ER 11 SKU / UID: 4000605373NW Special features For secure tightening of collet nuts of the ER/ESX system according to DIN 6499 Made from special steel Blued finish (tempered brown tone) Mini/compact design for restricted spaces FAQ Is this wrench suitable for ER 11 collets? Yes. The Collet Wrench ER Mini No.250K is specified for ER 11 collet nuts and is compatible with the ER/ESX system. What material and finish does the tool have? The TECWERK key is manufactured from special steel and supplied with a blued finish (tempered brown tone) for enhanced surface protection. Does the tool comply with a recognised standard? The design is intended for use with collet nuts produced to DIN 6499, ensuring compatibility with standard ER/ESX toolholding systems. Is the mini key suitable for tight machine environments? Yes. The compact format of the key is designed for tight spaces, making it useful at the bench and in crowded spindle areas where full-size wrenches are impractical. How does the wrench support production reliability? By enabling secure, repeatable clamping of collet nuts, the tool helps to reduce runout and vibration, contributing to consistent part quality and longer tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 16 Collet Spanner For ER/ESX Nuts, Hardened Zinc-Plated With Hanging Hole - TECWERK
Take advantage of a tool that combines secure clamping for ER/ESX nuts, hardened special steel construction and space-saving handling thanks to the integrated hanging hole; order directly via Metav Werkzeuge or consult our specialists for application advice. Collet spanner ER No.250 Gr. ER 16 AMF – Collet spanner for ER/ESX clamping nuts, hardened and zinc-plated (TECWERK) The Collet spanner ER No.250 Gr. ER 16 AMF is a workshop tool designed to tighten and loosen ER/ESX clamping nuts in toolholding systems, compatible with DIN 6499 specifications Secure clamping for ER/ESX nuts Conforms to DIN 6499 standards Special steel, hardened and zinc-plated Integrated hanging hole for storage Consistent clamping that reduces setup time A compact wrench engineered for repeatable results, the spanner delivers consistent clamping of ER/ESX nuts which reduces setup variability and minimises rework. The tool’s construction from special steel, combined with heat treatment, provides a stable contact surface that resists deformation under torque; this ensures that the ER 16 interface retains its dimensional accuracy over repeated cycles. For workshops aiming to keep production steady, this mechanical reliability translates into fewer stoppages and predictable tool performance. Robust finishing for long service life Finished with a zinc-plated surface after hardening, the device offers corrosion resistance suitable for typical shop environments without the need for extra maintenance. The hardened surface protects critical engagement faces against wear, so the spanner maintains fit and function with clamping nuts over time. The inclusion of an integrated hanging hole facilitates tidy storage at the bench or in a tool board, helping to keep the working area organised and tools within easy reach during frequent tool changes. Designed for compatibility and straightforward handling Made specifically for ER/ESX clamping nuts to the DIN 6499 specification, the tool prioritises fit and ergonomics. The simple geometry of the key ensures intuitive insertion and removal from the nut while providing the leverage necessary for secure tightening. This straightforward usability reduces handling errors and shortens the time needed for clamping operations, supporting efficient workflows in metalworking and precision toolholding applications. For buyers seeking tried-and-tested practicality, the focus is on reliable mechanical function rather than complex features. Contact Metav Werkzeuge for stock availability and application guidance on TECWERK collet spanners; our Emmerich-based team will advise on compatibility and delivery options by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000832443NW SKU / UID: 4000832443NW Item designation: Collet spanner ER No.250 Gr. ER 16 AMF Facts Key size: ER 16 Packaging unit: 1 Special features For secure clamping of ER/ESX clamping nuts according to DIN 6499 Made from special steel Hardened and zinc-plated finish With hanging hole for easy storage FAQ What clamping systems is this spanner compatible with? The spanner is designed for ER/ESX clamping nuts and complies with the DIN 6499 specification; the Collet spanner ER No.250 Gr. ER 16 AMF fits the ER 16 size. Is the tool corrosion-resistant for workshop use? Yes, the hardened construction with a zinc-plated finish provides corrosion protection suitable for standard workshop environments. Can the spanner withstand repeated torque applications without deforming? The use of special steel and heat treatment gives the spanner high wear resistance, ensuring dimensional stability under repeated clamping cycles. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 32 Collet Wrench For ER/ESX Collet Nuts, Hardened Zinc Plated With Hanging Hole - TECWERK
Take advantage of the combination of secure clamping, durable hardened steel and practical storage to keep set-up times low and tool changeovers reliable; order the collet wrench directly via Metav Werkzeuge or ask our consultants if needed. Collet wrench ER No.250 (ER 32) — hardened, zinc-plated (TECWERK) A collet wrench ER No.250 (ER 32) for secure tightening of ER/ESX collet nuts to DIN 6499, designed for routine workshop and machine-tool use Secure clamping for ER/ESX collet nuts DIN 6499 Hardened special steel for long service life Zinc-plated surface for corrosion protection Integrated hanging hole for convenient storage Reliable clamping that stabilises machining results The design delivers secure clamping for ER/ESX collet nuts to the DIN 6499 standard, which reduces the risk of slippage during rotation and helps maintain concentricity. By ensuring a consistent interface between spindle and tooling, the wrench contributes to repeatable runout performance and longer tool life. For maintenance teams and production technicians, the tangible benefit is fewer re-runs and less time spent diagnosing toolholding issues, making set-ups more efficient and measurable. Built for endurance to cut maintenance and replacement cycles Made from hardened special steel and finished with a zinc-plated coating, the tool offers resistance to wear and surface corrosion that would otherwise shorten service intervals. The material choice supports sustained mechanical loads encountered in routine tightening; the result is a longer interval between replacements and a lower total cost of ownership for clamping accessories. In practical terms, this means less inventory churn and greater confidence in everyday workshop operations. Thoughtful details that speed up daily workflows Small features influence daily efficiency: the compact form factor suits tight tool cabinets and busy benches, while the integrated hanging hole allows immediate storage beside the machine for rapid access. The simple, robust design is compatible with standard ER 32 fittings and supports quick tool changes during production runs. For workshop supervisors and setup engineers, the benefit is clear — reduced downtime and a tidier, more repeatable working environment that supports steady throughput. Contact Metav Werkzeuge for tailored advice and reliable supply of the ER 32 collet wrench; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 4000832445NW Product name: Collet wrench ER No.250 (ER 32) Brand: TECWERK Facts Key size: ER 32 Packaging unit: 1 Special features For secure tightening of ER / ESX collet nuts to DIN 6499 Made from special steel Hardened and zinc-plated surface With hanging hole for storage FAQ Is this wrench compatible with all ER 32 collet systems? The collet wrench ER No.250 is specified for ER 32 collet nuts and designed to work with ER/ESX systems manufactured to DIN 6499 What material and finish does the tool have? The tool is made from hardened special steel and is zinc-plated to provide wear resistance and basic corrosion protection Will the wrench help reduce tool-holding issues such as slippage? By delivering consistent, standard-compliant tightening, the wrench improves secure clamping and helps reduce slippage and runout-related problems Can the wrench be kept near the machine for quick access? Yes — the integrated hanging hole allows practical storage at the bench or beside the spindle for faster tool changes What is the article number for ordering or inventory? The article number is 4000832445NW and the item is listed as a collet wrench ER No.250 (ER 32) by TECWERK Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 40 Collet Wrench For ER/ESX Nuts Hardened Zinc Plated With Hanging Hole - TECWERK
Take advantage of the combination of precise clamping, robust construction and practical workshop handling for reliable production processes; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Collet spanner ER No.250, size ER 40 – hardened, zinc-plated (TECWERK) The Collet spanner ER No.250 (ER 40) is a workshop tool for secure tightening of ER / ESX collet nuts to DIN 6499, designed for routine machining and maintenance tasks. Secure clamping for ER / ESX collet nuts Hardened special steel for long service life Zinc-plated finish and hanging hole for storage Precision clamping that protects toolholders and workpieces The wrench is engineered for secure clamping of ER 40 collet nuts in conformity with DIN 6499, which ensures consistent axial force transmission and repeatable holding performance. Where a collet nut joins the toolholder to the tool shank, correct tightening prevents slippage and run-out; the spanner's geometry is matched to this function. As a workshop implement, it supports process stability by reducing rework and machine downtime through reliable torque transfer during assembly and maintenance. Robust materials for daily workshop demands Manufactured from special steel that is hardened and zinc-plated, the key offers high wear resistance and basic corrosion protection suited to busy shop floors. Hardening increases resistance to deformation under load, while the zinc-plated surface reduces the risk of surface corrosion in humid environments. The resulting combination prolongs service life and keeps calibration intervals and unexpected tool replacement to a minimum, contributing to predictable operating costs and uninterrupted production rhythms. Practical design to speed up everyday handling The compact form and integrated hanging hole enable tidy storage close to machining stations, reducing search times and improving workflow ergonomics. Supplied as a single unit, the tool is ready for immediate use and simple to integrate into a set of hand tools or a tool trolley. Clear, maintenance-friendly surfaces mean occasional cleaning is sufficient to maintain functionality, which supports fast tool changes and a more efficient workshop routine. For procurement or technical advice on the TECWERK Collet spanner ER No.250, contact Metav Werkzeuge in Emmerich for personalised guidance and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832446NW Product: Collet spanner ER No.250 Brand: TECWERK Packing unit: 1 Facts Size: ER 40 Special features Secure clamping of ER / ESX collet nuts to DIN 6499 Made from hardened special steel Zinc-plated finish Hanging hole for workshop storage FAQ Is the spanner suitable for ER 40 collet nuts? Yes. The TECWERK Collet spanner ER No.250 is specifically sized for ER 40 and made for tightening ER / ESX collet nuts to DIN 6499 (Article number 4000832446NW). What is the tool made from and how durable is it? The spanner is manufactured from special steel, hardened for wear resistance and zinc-plated to provide basic corrosion protection, giving a durable service life in workshop conditions. How should the spanner be stored between uses? Use the integrated hanging hole to store the spanner on a pegboard or tool rail in a dry place; regular cleaning after use keeps the zinc-plated surface in good condition. Can this tool withstand frequent industrial use? The combination of hardened material and robust finish makes the spanner suitable for regular workshop and light industrial environments where reliable clamping of collet nuts is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
HSK-A63 Tool Holder For Assembly System, Compatible With Montage System - TECWERK
Take advantage of a standardised HSK interface and proven compatibility with TECWERK mounting systems to streamline fixture setup and reduce interchange time. The HSK-A63 holder connects directly with the referenced mounting system (Art.-No. 2000832115) and is supplied as a single unit; order via Metav Werkzeuge or consult the Metav team for configuration advice. HSK-A63 holder for mounting system — TECWERK mounting-system adapter HSK-A63 holder for secure integration with TECWERK mounting systems, designed to accept standard HSK-A63 tool interfaces in fixture assemblies HSK-A63 interface compatibility Compatible with mounting system Art.-No. 2000832115 Single-piece packaging for immediate use Secure, standardised interface for precise tool retention The HSK-A63 holder implements a widely accepted spindle interface that supports consistent seating and repeatability when combined with a compatible fixture. By using a standardised connection, the holder reduces alignment variation during assembly changes and simplifies tool inventory management. This results in fewer changeover errors and predictable positioning, which benefits production lines where consistent tool location is essential for downstream accuracy. Seamless integration to cut setup time in mounting arrangements Designed for installation with the specified mounting system (Art.-No. 2000832115), the adapter enables direct interface mating without additional adapters or complex modifications. The compatibility with the TECWERK mounting arrangement supports faster changeovers and a simplified mechanical stack-up, leading to measurable time savings during maintenance and tool replacement. The practical outcome is improved machine uptime and less non-productive time at the workstation. Clear procurement and minimal logistics disruption Supplied as a single packaging unit, the holder fits straightforward procurement and stocking strategies. Metav’s role as distributor provides a reliable supply channel and an experienced quality filter for the European market; this helps ensure the component received matches the expected specification and is ready for immediate deployment. For production planners, that means fewer surprises on delivery and a direct route to the correct mounting interface. For reliable HSK-A63 mounting solutions from TECWERK, contact Metav Werkzeuge for product matching and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832118NW Article name: HSK-A63 holder for mounting system (TECWERK) Brand: TECWERK Product type: Holder for mounting system Compatible with: mounting system Art.-No. 2000832115 Packaging unit: 1 Core Data Packaging unit: 1 Compatible mounting system Art.-No.: 2000832115 Interface: HSK-A63 Special features Standardised HSK-A63 interface Integration for mounting system assemblies Brand: TECWERK FAQ What does the HSK-A63 holder fit? The HSK-A63 holder (TECWERK, SKU 2000832118NW) is intended for mating with HSK-A63 tool interfaces and integration into the referenced mounting system Art.-No. 2000832115. Is the holder compatible with standard HSK-A63 tooling? Compatibility is based on the HSK-A63 standard; the holder from TECWERK accommodates standard HSK-A63 toolholders when used in the correct mounting arrangement. How is the product supplied? The item is supplied as a single unit (packaging unit 1) under article number 2000832118NW. Can the holder be used with other mounting systems? The holder is designed for the TECWERK mounting system specified; use with other systems requires verification of mechanical fit and interface compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Schnellspannmutter DT3559 M14 DEWALT
passend zu allen Winkelschleifern mit M14 Antriebsspindel · kein zusätzliches Werkzeug zum Scheibenwechsel · bei eventuellen Bedarf auch mit Stirnlochschlüssel zu öffnen · zum Befestigen von Trenn- und Schruppscheiben
Schnellspannmutter FIXTEC M14 AEG
Scheibenwechsel in Sekunden · Lösen und Anziehen von Hand · kein Werkzeug erforderlich · nur 8 mm stark · erhöht die Schleiffläche · integrierte Sicherheitskupplung · für Winkelschleifer aller Fabrikate mit Spindel M14 und Scheibendurchmesser von 115-150 mm
SK40 Pull Stud with M16 Thread, ISO 7388-3 Form AF, 17mm Bore - TECWERK
Take advantage of the proven combination of ISO 7388 / II Form B compliance, SK40 taper fit and an M16 threaded interface to secure reliable drawbar engagement and repeatable tool retention. Order the TECWERK pull stud directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK pull stud — ISO 7388/II Form B, SK40 with bore (M16) The TECWERK pull stud ISO 7388/II Form B is a precision retention component for SK40 spindle systems, engineered to ensure consistent drawbar clamping in CNC and machining-centre applications. ISO 7388 / II Form B standard compatibility SK40 taper for reliable spindle fit M16 thread for positive drawbar connection Central bore for drawbar/coolant access Consistent clamping through standard conformity Compliance with ISO 7388 / II and the Form B geometry guarantees interchangeability with other standard retention systems and supports reproducible clamping forces. The standardised interface reduces uncertainty at tool change, so toolholding performance is predictable and can be integrated into production planning. With the SK40 taper and M16 thread specified, the component is suited to established spindle toolholders, enabling simplified spare-part management and shorter downtimes. Secure drawbar engagement and straightforward functionality The retention stud features a central bore that permits unobstructed drawbar engagement and may be used in systems where internal coolant or lubrication paths are required. The stud’s geometry — including d1: 18.95 mm, d2: 12.95 mm and d3: 17 mm — is designed to interface precisely with mating drawbar mechanisms, so axial retention and torque transmission are maintained during heavy machining tasks. This technical layout supports stable tool retention, which is vital for repeatable machining accuracy. Precise dimensions for repeatable accuracy Key dimensions such as L1: 44.5 mm and L2: 16.4 mm define the effective length and engagement depth, helping to control stick-out and tool projection consistently across setups. The clear numerical specifications allow planners and engineers to verify compatibility with existing holders and spindles before purchase. By basing decisions on measurable values rather than estimates, workflow reliability is improved and setup variation is minimised. Practical integration into workshop workflows The compact design and standardised threading ensure this retention stud slots into conventional SK40 toolholding systems with minimal modification. As a delivery-ready industrial part, it supports inventory rationalisation for production and maintenance departments, reducing the variety of special components required. For further compatibility checks or to confirm suitability for specific machining operations, technical guidance is available from Metav Werkzeuge and its distribution channels. For procurement or technical confirmation of the TECWERK pull stud (SKU 2000832720NW) contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to secure fast supply from central stock. Technical data Article number: 2000832720NW Label: Anzugsbolzen ISO 7388/IIB SK40 m.Bohr.TECWERK Manufacturer: TECWERK Norm: ISO 7388/II Core specifications Thread: M16 Taper: SK40 d1: 18.95 mm d2: 12.95 mm d3: 17 mm d4: 7.35 mm L1: 44.5 mm L2: 16.4 mm Special features Form: B With central bore Packaging unit: 1 FAQ Which standard does this pull stud conform to? The TECWERK pull stud is manufactured to ISO 7388 / II Form B and is intended for use where that standard is specified, reference SKU 2000832720NW. Is the retention stud compatible with SK40 spindles? Yes — the component is specified for SK40 taper interfaces and uses an M16 thread for drawbar engagement, suitable for standard SK40 toolholding systems. What is the purpose of the central bore in this design? The central bore enables secure drawbar engagement and can allow internal coolant or lubrication routing where the machine’s spindle and toolholder design provide such functionality. What are the critical dimensions to check for compatibility? Key dimensions to verify are d1: 18.95 mm, d2: 12.95 mm, L1: 44.5 mm and L2: 16.4 mm; these define the engagement geometry of the TECWERK pull stud (SKU 2000832720NW). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com