14.2mm Countersink For M12 Screws 120° Cone Angle, D4 24 H3 5 - AMF
Take advantage of the combination of standard conformity, precise seating geometry and compact dimensions to ensure consistent assembly results and reduced rework. The combination of DIN 6319D conformity, a 14.2 mm bore and a 120° countersink angle supports reliable fastening in repetitive production. Order via Metav Werkzeuge or request application advice from the consultants. AMF Countersunk Washer DIN 6319D — for M12, 120° countersink The AMF countersunk washer DIN 6319D provides a defined seating for M12 countersunk screws in mechanical assemblies and general workshop use. DIN 6319D standard compliance For M12 countersunk screws 14.2 mm bore diameter 120° countersink angle Consistent seating for reliable assemblies The washer ensures a defined seating surface for countersunk fasteners, converting screw head geometry into repeatable clamping behaviour. Conformity with DIN 6319D means the bearing face and taper are manufactured to a recognised tolerance system; this reduces variation during assembly and minimises the need for corrective work. As a direct consequence, cyclical processes such as batch assembly or jigs/fixtures benefit from fewer rejects and quicker throughput, because the part enables a predictable interface between screw and component. Clear dimensions for assembly planning and tolerance control Key dimensions are provided for integration into drawings and fixtures: D2 = 14.2 mm (bore), D4 = 24 mm (outer diameter) and H3 = 5 mm (height). These values allow engineers to calculate contact surface, material removal and clearance requirements when combining the washer with countersunk screws and mating parts. The compatibility with M12 fasteners is explicit, simplifying parts lists and avoiding trial-and-error on the workshop floor. Accurate dimension data supports reliable torque transfer and consistent seating depth across repeated installations. Standardised parts for efficient procurement and maintenance Using a standardised washer simplifies stock management and interchangeability across suppliers and machines. The adherence to DIN 6319D facilitates replacement and cross-referencing with established fastener systems, which is especially valuable for maintenance cycles and long-term production planning. Reduced variety of bespoke components leads to leaner inventory, easier spare-part handling and predictable maintenance windows — practical advantages for both production planners and workshop technicians. Contact Metav Werkzeuge for tailored advice on integrating the AMF countersunk washer into assemblies or for order information; technical specialists are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000833468NW SKU: 4000833468NW Standard: DIN 6319D Facts Bore diameter (D2): 14.2 mm Outer diameter (D4): 24 mm Height (H3): 5 mm Countersink angle: 120° Suitable for screw size: M12 Packaging unit: 1 Design & features Product type: Countersunk washer Brand: AMF Application: Seating for countersunk screws FAQ What size of screws is this washer designed for? The AMF countersunk washer DIN 6319D is designed for M12 countersunk screws and provides the matching bore and taper for correct seating. Which dimensions are most relevant when planning an assembly? Key values are the 14.2 mm bore (D2), the 24 mm outer diameter (D4) and the 5 mm height (H3); these determine clearance, contact area and stack-up in the assembly that uses the AMF washer. Does the washer comply with an established standard for interchangeability? Yes — the washer is manufactured to DIN 6319D, ensuring compatibility with standardised countersunk screw systems and simplifying replacements. Can this washer improve assembly repeatability in jigs and fixtures? The defined geometry and conformity to DIN 6319D provide a reproducible seating surface, which supports repeatable torque transmission and consistent clamping across multiple assemblies using the AMF washer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14/20mm T-Slot Nut Nr. 6322A for M6 x 16 Fixed Mounting, H10 5mm - AMF
Product data issue: the provided manufacturer "AMF" is not listed in the approved manufacturer reference overview supplied with the briefing. The specification mandates that a product description must include one of the exact manufacturer/responsible entries from that reference; without a matching entry the required manufacturer block cannot be completed and the full, compliant product text cannot be generated. Please supply the correct manufacturer name as it appears in the reference list (for example Metav IndustryLine, Filetta, Kern, Dino‑Lite, Walter Tools, etc.), or confirm which of the listed responsible contacts should be used for this article. After receiving a valid manufacturer mapping from the approved overview, a complete British English product description conforming to the requested structure and editorial rules will be produced.
140-200mm Heavy-Duty Screw Vise With Lock Nut H140-200mm, 46mm Jaw Width - AMF
Take advantage of the adjustable height (140–200 mm) and the high load capability (max. 60) to secure a wide range of workpieces reliably; order the Nr. 6430S Atlas - 200 directly via Metav Werkzeuge or ask our consultants if needed. Nr. 6430S Atlas - 200 — Screw vice with adjustable height and trapezoidal drive (AMF) The Nr. 6430S Atlas - 200 is a heavy-duty screw vice designed for versatile clamping tasks in workshop and industrial settings, offering a secure locking nut and a robust trapezoidal thread for precise adjustment. Adjustable height 140–200 mm Max load capacity 60 Jaw width 75 mm Trapezoidal thread 30 x 6 mm Stable clamping for varied workpieces The vice provides a reliable clamping solution by combining an adjustable height range with a substantial load rating. The height adjustment (140–200 mm) allows adaptation to different workpiece profiles and set-ups, reducing the need for additional shims or fixtures. A higher load capability supports tougher applications, so heavier components remain steady during machining, marking or assembly. This stability speeds up workflow and reduces rework caused by movement. Smooth, precise adjustment with trapezoidal drive The trapezoidal thread drive (30 x 6 mm) converts handle rotation into controlled linear movement, delivering repeatable jaw travel and consistent clamping force. A trapezoidal thread is chosen for its wear resistance and ability to transmit force efficiently, which benefits setups requiring frequent repositioning. The vice's jaw width (B2: 75 mm) and the specified spanner size (46 mm) make it compatible with common workshop tools and maintenance procedures, simplifying integration into existing toolsets. Compact footprint that saves bench space With an overall length of 110 mm, the vice occupies a modest area on the workbench while still offering substantive clamping capacity. Its compact design makes it suitable for busy benches and production islands where space is at a premium. The combination of compactness and robust function supports smoother operations, enabling quicker part changes and easier positioning without sacrificing clamping performance. Secure locking and low-maintenance operation The unit is supplied with a counter nut for secure locking of the threaded spindle, preventing unintended adjustment once set. The straightforward construction reduces maintenance needs and shortens downtime for routine checks. Supplied as a single packing unit, the vice is ready for installation and immediate use in small-series production or workshop environments that prioritise reliable fixturing. Contact Metav Werkzeuge for tailored advice on whether the AMF Nr. 6430S Atlas - 200 matches specific workshop requirements and request detailed technical information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833128NW Type: Nr. 6430S Atlas - 200 Product: Screw vice Brand: AMF Packaging unit: 1 Key dimensions Overall length: 110 mm Width: 18 mm Jaw width (B2): 75 mm Height range: 140–200 mm Spanner size: 46 mm Trapezoidal thread: 30 x 6 mm Max load: 60 Features Includes counter nut for locking Adjustable height mechanism Trapezoidal thread drive for precise movement Compact bench vice design Supplied as single packing unit FAQ How much height adjustment does the vice allow? The vice provides an adjustable height range from 140 mm to 200 mm, enabling the AMF Nr. 6430S Atlas - 200 to accommodate a variety of workpiece profiles. What kind of thread does the drive use and why does it matter? The drive uses a trapezoidal thread (30 x 6 mm), which offers durable, accurate linear movement and is well suited to applications requiring repeated clamping adjustments with consistent force. What is the maximum load the vice can handle? The specified maximum load is 60 (as stated in the product data), reflecting the vice’s suitability for heavier clamping tasks in a workshop environment. Is the vice ready for immediate installation on the bench? Yes; the AMF Nr. 6430S Atlas - 200 is supplied complete with a counter nut and is delivered as a single packing unit for straightforward mounting. Which tool is needed for maintenance or adjustment of the spindle? A spanner size of 46 mm is listed for relevant fasteners, making standard maintenance and occasional adjustments manageable with common workshop tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140-210mm Machine Vise Flat Jaw Height Adjustable 170kg Capacity, TR 50x8 - AMF
Take advantage of the adjustable height (140–210 mm) and the specified maximum load (170) to secure a wide range of workpieces reliably; the flat support surface and compact throat make this vice a practical choice for general workshop clamping tasks. Order or request advice directly via Metav Werkzeuge for a dependable supply and technical clarification. Screw vice Nr. 6400 - 210 by AMF — adjustable height 140–210 mm, flat support The Screw vice Nr. 6400 - 210 is a compact bench clamping tool designed for general workshop use, offering a variable working height and a sturdy flat support for stable positioning of components. Adjustable height 140–210 mm Maximum load 170 Flat support surface for stable clamping Throat TR 50 x 8 Stable clamping across variable heights for consistent workflows The vice’s adjustable height range of 140–210 mm allows secure clamping of parts with differing profiles without frequent repositioning of fixtures. The height adjustment reduces setup time and supports repetitive tasks by maintaining a consistent clamping plane, which improves process reliability. The moderate throat depth and slot dimensions (TR 50 x 8) provide clearance for small jigs and hold-downs, while the flat support promotes even contact and reduces the risk of component distortion during tightening. These attributes help to streamline bench work and minimise rework. Robust build and low-maintenance design for everyday use A compact bench vice with a focus on robust construction offers long service intervals and straightforward upkeep. The simple mechanical design means maintenance is limited to routine cleaning and lubrication of the lead screw and sliding surfaces; this supports uninterrupted operation in busy workshops. The visible design elements — such as the flat support and solid jaw geometry — are intended to deliver consistent behaviour under load, giving operators a reliable clamping platform for assembly, finishing and measurement tasks. Practical performance that supports shop productivity A maximum load rating of 170 indicates suitability for a broad spectrum of general clamping operations where moderate force and secure hold are required. The vice is intended as a versatile workstation tool to aid measuring, filing, light machining and assembly tasks. Its compact footprint preserves bench space, allowing multiple tools to be used in sequence without lengthy changeovers. By combining secure clamping with simple operation, the vice contributes to predictable cycle times and improved throughput in small-batch or repair-focused environments. For tailored technical advice or to arrange supply of the AMF screw vice Nr. 6400 - 210, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833117NW Type: Nr. 6400 - 210 Label: Schraubbock Nr.6400 Gr.210 m.flacher Auflage H.140-210mm AMF Brand: AMF Product type: Schraubbock Packaging unit: 1 Facts Maximum load: 170 Height range: 140–210 mm Throat / slot: 50 x 8 D1: 80 D2: 70 Special features Flat support surface Adjustable height mechanism Compact footprint for bench use SKU / UID: 4000833117NW FAQ What height range does the vice cover? The vice offers an adjustable height range from 140 to 210 mm to accommodate varying workpiece profiles when using the AMF screw vice Nr. 6400 - 210 (SKU 4000833117NW). What does the maximum load figure indicate? The stated maximum load of 170 denotes the rated clamping capacity for the vice under normal workshop conditions as specified for the AMF Nr. 6400 - 210. Is the vice suitable for bench mounting and general workshop tasks? Yes, the vice is intended as a bench clamping tool suited to general workshop duties such as assembly, finishing and light holding operations. What is the throat or slot specification and its benefit? The throat/slot is specified as TR 50 x 8, providing clearance for fixtures and enabling the use of small hold-downs or jigs during clamping operations. Are maintenance requirements complex for this vice? Maintenance is straightforward and typically limited to keeping the lead screw and sliding surfaces clean and lubricated to ensure long service life of the AMF vice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Clamping Jaw For T-Slot 20+22mm H0-65mm - AMF
Taking advantage of the combination of T-slot compatibility, an adjustable clamping height and a compact footprint ensures reliable, repeatable fixturing in mixed tooling setups; fast integration keeps cycle times low. Order the AMF component directly via Metav Werkzeuge or ask our consultants for configuration advice. Clamping wedge No. 6313K (Gr.22) — for T-slot 20 + 22 mm, clamping height 0–65 mm | AMF Clamping wedge No. 6313K is a compact clamping element designed for secure fixturing in machine tables with 20 mm and 22 mm T-slots, suited to M20 bolting and adaptable setups where space and repeatability matter T-slot compatibility for 20 and 22 mm channels Adjustable clamping height 0–65 mm 22 mm width for compact fixture layouts Suitable for M20 bolting, 140 mm overall length Secure, measurable clamping for T-slot fixtures The clamping wedge offers direct, mechanical locking into standard T-slot channels (20 + 22 mm), delivering a predictable contact surface and consistent clamp force. Compatibility with an M20 thread allows the use of common fasteners, simplifying procurement and maintenance. This predictability reduces setup variation and supports process control initiatives in small-batch and production environments, making the component suitable for workshops and production cells that require stable workholding. Flexible height range to match diverse tooling requirements With an adjustable clamping height of 0–65 mm (height variants noted: H1: 0–65 mm; H2: 50–100 mm), the element adapts to different stock thicknesses without complex adapters. The limited vertical adjustment enables quick reconfiguration between jobs and lowers fixture inventory by covering multiple applications with one component. Such adaptability shortens changeover time and improves throughput while maintaining secure contact and repeatable positioning during machining or assembly operations. Compact form factor that supports efficient layouts A 22 mm width and 140 mm overall length result in a compact footprint that integrates into dense fixture arrangements while preserving clearance for neighbouring clamps and tooling. Supplied as a single unit, the clamping wedge is intended for direct installation into existing fixturing systems where space optimisation and reliable clamping are priorities. The simple geometry eases inspection and replacement, supporting long-term uptime and predictable maintenance cycles. For tailored advice on integrating the AMF clamping wedge into existing fixtures or for ordering options, contact Metav Werkzeuge for consultancy and procurement support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 4000603006NW Type: Nr. 6313K Description: Clamping wedge Gr.22 for T-slot 20 + 22 mm, AMF Dimensions & compatibility Width: 22 mm Overall length: 140 mm T-slot compatibility: 20 + 22 mm Clamping height: 0–65 mm (H1) Suitable for: M20 Features & notes Product type: Clamping wedge Brand: AMF Packaging unit: 1 Axite enrichment: Addition: B2: 66; H1: 0-65; H2: 50-100 FAQ Is the clamping wedge suitable for both 20 mm and 22 mm T-slots? Yes. The component fits T-slot channels of 20 mm and 22 mm, designed for direct mounting in both sizes. What clamping height can be achieved with this wedge? The clamping height range is 0–65 mm for the H1 configuration; an additional H2 variant covers 50–100 mm as specified in the product enrichment. Can standard M20 fastenings be used with this clamping element? Standard M20 bolts and screws are compatible with the clamping wedge, enabling straightforward integration with common fixturing hardware. What is the product reference for ordering or spare part checks? Order or reference the item as No. 6313K, SKU 4000603006NW, when enquiring about availability or replacements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T-Nut Clamp Jaw 14mm Clamping Height 0-50mm M12x14x125 - AMF
Benefit from a robust clamping solution that combines a compact footprint, compatibility with standard 14 mm T‑slots and an adjustable clamping height range of 0–50 mm; order the clamping jaw directly via Metav Werkzeuge or ask the consultants for technical clarification. Clamping jaw Nr. 6321 – 14 mm T‑slot compatibility, 0–50 mm clamping height (AMF) The Clamping jaw Nr. 6321 is a compact fixture component engineered for reliable workholding in machines with 14 mm T‑slots, offering a variable clamp height from 0 to 50 mm for flexible set‑ups. For 14 mm T‑slots, precise fit Adjustable clamping height 0–50 mm Total length 140 mm for stable support Includes M12 x 14 x 125 clamping screw Precision clamping for standard T‑slot fixtures The clamping element is designed primarily for machines and fixtures that use a 14 mm T‑slot, delivering repeatable engagement and alignment. The adjustable 0–50 mm clamping height allows adaptation to different workpiece thicknesses without changing major components, which shortens set‑up times and reduces tool changes. This technical flexibility supports faster machine cycles and contributes to higher process efficiency in routine or batch production. Stable support through compact dimensions With an overall length of 140 mm and a profile width of 17 mm, the component provides a secure bearing surface that minimises movement under load. The geometry favours even distribution of clamping force and helps maintain position stability during machining operations. For fixture designers and workshop technicians, these dimensions mean easier integration into existing modular clamping systems and predictable behaviour under tightening torque. Supplied fastening for quick assembly The delivery includes a ready‑to‑fit fastening element M12 x 14 x 125, enabling immediate mounting in standard setups and avoiding extra procurement steps. The pre‑specified screw dimension simplifies procurement and ensures compatibility with the clamping jaw's threaded interface, which reduces downtime during retrofit or replacement operations. Clear, standardised fastening supports consistent torquing and repeatable clamping performance. Practical advantages for workshops and production lines As a fixture component from AMF, the clamping jaw is suited to industrial and trade workshops where fast, reliable workholding is required. The combination of standard T‑slot compatibility and a broad clamping height range supports varied part sizes and fixtures, improving operational throughput. For procurement managers and shop floor planners, the product offers a technical basis for reducing fixture complexity and consolidating spare parts across machines. For reliable integration into 14 mm T‑slot fixtures and procurement support, contact Metav Werkzeuge for product availability and expert advice on application planning. Technical data SKU: 4000833066NW Type: Nr. 6321 Product type: Clamping jaw Manufacturer: AMF Packaging unit: 1 UID: 4000833066NW Dimensions & core data T‑slot size: 14 mm Clamping height range: 0–50 mm Total length: 140 mm Width: 17 mm Included components & features Supplied fastening: M12 x 14 x 125 clamping screw Label: Spannpratze Nr.6321 f.T‑Nut 14mm Spann‑H.0‑50mm M12x14x125mm AMF Type designation: Nr. 6321 FAQ Is this clamping element compatible with 14 mm T‑slots? Yes. The Clamping jaw Nr. 6321 is specifically designed for 14 mm T‑slot fixtures and the SKU 4000833066NW identifies this configuration. What clamping height does the unit provide? The clamping height range for the AMF clamping jaw is 0–50 mm, allowing flexible adaptation to varying workpiece thicknesses. Is a fastening screw included with the clamping jaw? Yes. The delivery includes an M12 x 14 x 125 clamping screw for immediate mounting. What are the main dimensions to consider for fixture integration? Key dimensions are total length 140 mm and width 17 mm, providing the reference sizes for fixture layout and adjacent components. Which workshop applications suit this clamping jaw? The component is suitable for general fixturing and workholding on milling machines and modular tables where 14 mm T‑slots are used and a 0–50 mm clamping range is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T-Slot Clamping Wedge 12mm T-Nut, Height 0–50mm with M12x12x125 Clamp Screw - AMF
Take advantage of precise, adjustable clamping combined with straightforward integration into standard T-slot fixturing; the included M12 x 12 x 125 clamping screw reduces procurement steps while the 0–50 mm clamping range supports a wide variety of workpiece heights. Order or request advice via Metav Werkzeuge for reliable supply and technical guidance. Clamping wedge Nr. 6321 (AMF) — for 12 mm T-slot, 0–50 mm clamp height Clamping wedge Nr. 6321 is a compact clamping element engineered for secure workholding in 12 mm T-slots, offering an adjustable clamping height from 0 to 50 mm and supplied with an M12 x 12 x 125 clamping screw. Secure clamping from 0 to 50 mm Compatible with 12 mm T-slots Includes M12 x 12 x 125 clamping screw 17 mm width; 140 mm overall length Reliable adjustable clamping for T-slot fixtures The clamping wedge provides repeatable and precise workholding for machining and assembly tasks that use standard T-slot fixtures. Designed for compatibility with a 12 mm T-slot, the device enables straightforward positioning and a secure grip across the specified 0–50 mm clamping height. The integrated geometry ensures downward force is converted into stable lateral support, which reduces movement during cutting or assembly operations. The delivery includes an M12 x 12 x 125 clamping screw, eliminating the need for an additional fastener purchase and simplifying initial setup. For engineers and workshop managers this means less downtime and faster fixture changes while maintaining consistent clamping performance. Designed measurements that support stability and accessibility Compact dimensions contribute to efficient use of table space without compromising strength: the component presents a 17 mm width and 140 mm overall length, dimensions that allow multiple wedges to be arrayed along the T-slot for distributed clamping or stepwise support of elongated workpieces. The relatively slim profile minimises interference with tool paths while providing sufficient contact area to resist torsional and lateral loads. Using clearly defined metrics assists planning for fixture layouts and ensures the wedge integrates well with existing vices, stops and modular clamp components. The result is a dependable holding solution that supports both repeat production runs and one-off machining tasks. Streamlined integration and dependable supply chain benefits Including the matching clamping screw in the package reduces procurement complexity and speeds assembly of the clamping system; this combination of component and fastener is intended to lower installation time and inventory variety. The wedge’s straightforward function and familiar fastening standard make it easy to adopt within existing clamping setups, supporting quicker machine changeovers and predictable set-up times. Backing this hardware, Metav Werkzeuge provides accessible product information and logistics from its Emmerich hub, helping workshops maintain continuity of supply and make informed decisions based on measured component data rather than assumptions. For tailored advice on integrating the AMF clamping wedge Nr. 6321 into existing fixturing systems and to arrange purchase through Metav Werkzeuge, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833065NW Type: Nr. 6321 Brand: AMF Product type: Clamping wedge Packaging unit: 1 Facts Width: 17 mm Overall length: 140 mm Clamping height: 0–50 mm T-slot compatibility: 12 mm Special features Includes clamping screw M12 x 12 x 125 Label: Spannpratze Nr.6321 f. T-Nut 12mm axite enrichment: Addition: Spannschraube: M12 x 12 x 125; B2: 50 SKU / UID: 4000833065NW FAQ What T-slot size is this clamping element designed for? The clamping wedge Nr. 6321 is designed for a 12 mm T-slot and aligns with standard 12 mm table grooves. What clamping height range does the wedge support? The device offers a 0–50 mm clamping height, enabling secure gripping of workpieces within that vertical range. Is a clamping screw included with the product? Yes, the delivery for the clamping wedge Nr. 6321 includes an M12 x 12 x 125 clamping screw to simplify setup. What are the physical dimensions relevant for fixture planning? Key dimensions are 17 mm width and 140 mm overall length, which help determine spacing and interference with tooling. Can this wedge be used for distributed clamping along a workpiece? Yes, the geometry and length allow multiple wedges to be positioned along the T-slot for distributed support and improved stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T‑Slot Clamp Bar 18mm T‑Slot Height 0‑75mm M16×18×160 Clamp Bolt - AMF
Take advantage of the combination of precise T‑slot compatibility, a wide adjustable clamping range and the included M16 clamping screw for reliable fixturing; order directly via Metav Werkzeuge or ask the consultants for application advice. Clamping Claw No. 6321 — T‑slot 18 mm, clamping height 0–75 mm (AMF) A Clamping Claw No. 6321 designed for secure fixturing in 18 mm T‑slots, offering an adjustable clamping height from 0 to 75 mm for versatile workholding in machining and assembly setups. T‑slot 18 mm compatibility Adjustable clamp height 0–75 mm Includes M16 clamping screw Overall length 140 mm Secure, adjustable fixturing for T‑slot tables The clamping element delivers a practical solution for fast and repeatable workholding on machine and assembly tables with a T‑slot 18 mm standard. The adjustable clamping height 0–75 mm enables accommodation of varying workpiece profiles without additional shims, reducing setup time and minimising machine downtime. Where precise positioning is required, the device’s compact geometry supports consistent clamping pressure and alignment, making it suitable for small-batch production and flexible fixture concepts. Fast installation and reliable mechanical connection Designed to accept the supplied M16 clamping screw (M16 x 18 x 160), the unit simplifies installation by combining the clamping element with a compatible fastener ready for immediate use. The overall length 140 mm and width 17 mm provide a compact footprint that fits into common fixture patterns while maintaining the lever arm required for a secure hold. The integrated screw dimensioning gives a straightforward torque-to-clamp translation, enabling a controlled clamp force for stable machining or assembly operations. Streamline workshop inventory and production workflows As a purpose-built fixturing accessory from AMF, this clamp head is intended to integrate easily into existing tooling sets and modular fixturing systems. The compact form and standardised interface reduce the number of specialised parts on the shelf, while the unit’s adaptability supports multiple clamping tasks across different jobs. Metav’s role as a precision partner means access to a broad supply chain, fast replenishment and the reassurance of established quality standards backed by long-term customer trust. For reliable, versatile T‑slot clamping from AMF, contact Metav Werkzeuge to discuss suitability for specific fixtures or to place an order; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833068NW SKU: 4000833068NW Type: No. 6321 Brand: AMF Product type: clamping claw Specifications Clamping height: 0–75 mm T‑slot compatibility: 18 mm Overall length: 140 mm Width: 17 mm Included clamping screw: M16 x 18 x 160 Materials & features Packaging unit: 1 Ready for immediate installation with supplied clamping screw Compact design for modular fixturing Axite enrichment: Spannschraube M16 x 18 x 160; B2: 50 FAQ What T‑slot does this clamping element fit? The clamping component is designed specifically for an 18 mm T‑slot, ensuring compatibility with standard T‑slot tables and fixture plates. What is the adjustable clamping range? The device provides a clamping height of 0–75 mm, enabling secure holding of workpieces with varying thicknesses without additional spacers. Is a clamping screw supplied with the unit? Yes — the product includes an M16 clamping screw (M16 x 18 x 160) to facilitate immediate installation and consistent clamping performance. What are the physical dimensions relevant to fixture design? Key dimensions are overall length 140 mm and width 17 mm, useful for planning fixture layouts and ensuring adequate clearance. Can this clamp be used across different fixture systems? The standardised interface and compact form factor make the item suitable for integration into modular fixture systems where an 18 mm T‑slot is used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm Clamping Wedge Nr. 6314V Height 10-38mm M12x14x100mm - AMF
Compact clamping solution for 14 mm T-slots with an adjustable clamping height of 10–38 mm and supplied M12 x 14 x 100 mm clamping screw; combines straightforward installation and reliable workholding — order the AMF clamping jaw directly via Metav Werkzeuge or consult our specialists for application advice AMF clamping jaw Nr. 6314V — for 14 mm T-slot, adjustable clamping height 10–38 mm The AMF clamping jaw Nr. 6314V is a compact workholding component suited to T-slot fixtures, providing an adjustable clamping range for versatile workshop and production use Fits 14 mm T-slots Adjustable clamping height 10–38 mm Supplied with M12 x 14 x 100 clamping screw Robust design for industrial workholding Secure and adaptable workholding for T-slot fixtures The clamping jaw is engineered to deliver a secure grip in standard 14 mm T-slot systems, allowing straightforward accommodation of varying workpiece heights within the 10–38 mm range. This adjustability reduces the need for multiple shim sets or alternative jaws, streamlining setup procedures. The design translates into repeatable clamping pressure across batches, which supports consistent machining tolerances and fewer reworks. Compatibility with common T-slot profiles ensures quick integration into existing fixturing systems without major retrofitting. Fast installation and reduced setup time with included clamping screw Assembly is simplified by the delivered M12 x 14 x 100 mm clamping screw, which is matched to the jaw’s thread specification and overall length. The standard M12 thread provides reliable torque transmission for stable clamping, while the screw length suits common mounting depths in fixture plates. As a consequence, downtime for changeovers is minimised, and the component can be installed or replaced during routine maintenance with basic workshop tools. Clear mechanical interfaces reduce assembly errors and support predictable cycle times in production environments. Durable component design that supports industrial workflows Constructed for repetitive use in workshop and production settings, the jaw’s form factor focuses on long-term serviceability and consistent performance. The compact geometry is intended to withstand frequent clamping cycles and to fit within confined fixturing arrangements where space is at a premium. Attention to fit and thread standardisation reduces variability at the clamping interface, contributing to fewer rejects and a more reliable production flow. Metav’s sourcing and quality filter for the European market further ensures that each component meets industrial expectations for repeatability and robustness. Contact Metav Werkzeuge for availability of the AMF clamping jaw Nr. 6314V and for tailored advice on integrating this workholding component into existing fixture systems Technical data SKU: 4000833073NW Type: Nr. 6314V Brand: AMF Label: Spanneisen Nr.6314V f.T-Nut 14mm Spann-H.10-38mm Spannschraube M12x14x100mm AMF Packaging unit: 1 Facts T-slot width: 14 mm Width: 14 mm Clamping height: 10–38 mm Thread: M12 Overall length: 100 mm Clamping screw: M12 x 14 x 100 mm A: 20 mm B2: 40 mm E1: 21 mm E2: 40 mm LS: 49 mm Special features For T-slot 14 mm fixtures Adjustable clamping height 10–38 mm Supplied clamping screw M12 x 14 x 100 mm Compact footprint for confined fixturing FAQ Is this clamp compatible with 14 mm T-slots? Yes. The AMF clamping jaw Nr. 6314V (SKU 4000833073NW) is designed specifically for 14 mm T-slots and mates with common T-slot profiles. Is the clamping screw included with the jaw? Yes. The unit is supplied with a matched clamping screw: M12 x 14 x 100 mm for immediate installation. What workpiece thicknesses can be clamped? The clamping range covers 10–38 mm, enabling secure holding of a wide variety of workpiece heights without additional shimming. Is the component suitable for industrial production use? The jaw is built for repetitive workshop and production use, with standardised threads and dimensions to support reliable, repeatable workholding. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm Slot Nut Nr. 6322B 10mm Height, For M6 x 16 Fixing - AMF
Take advantage of a compact, robust fastening solution with a 14 mm nominal slot width and compatibility with M6 x 16 fasteners; the compact 22 mm overall length supports secure, low-profile installations and simple assembly. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot nut No. 6322B — 14 mm slot, fixed mounting (AMF) A T-slot nut No. 6322B engineered for secure fixed mounting in 14 mm T-slots, suitable for workshop and industrial fixturing where compact, reliable clamping is required Nominal slot width 14 mm For fixed mounting applications Compatible with M6 x 16 Compact overall length 22 mm Secure and compact design for reliable clamping The design focuses on robust, repeatable fastening in 14 mm T-slots, providing a reliable interface between profile and fastener. The component’s 22 mm overall length and 10 mm height ensure a low-profile fit where space is limited while maintaining enough contact area for stable torque transmission. Thanks to the compatibility with M6 x 16 bolts, integration with common workshop hardware is straightforward. This combination reduces setup time and minimises rework, supporting efficient production and assembly cycles. Practical benefits for workshop and industrial applications Engineered for fixed mounting, this slot nut delivers consistent alignment and secure seating, which simplifies fixture assembly and prevents inadvertent loosening during operation. The compact geometry cuts material overhang and keeps assemblies neat, which is particularly useful in jigs, machine tables and modular framing. By using a standard bolt interface, procurement and maintenance are simplified, lowering total process costs and downtime without sacrificing performance. Installation clarity and compatibility Installation is intuitive: position the nut in the T-slot, align for the required clamping point and secure with the specified M6 x 16 fastener. The simple mounting principle reduces assembly errors and speeds up repetitive setups. Where interchangeability matters, the standardised 14 mm nominal slot width makes this component compatible with a wide range of aluminium profile systems and accessory parts commonly used across workshops and production lines. Contact Metav Werkzeuge for tailored advice on integrating the T-slot nut No. 6322B into existing assemblies and to confirm immediate availability from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833227NW Type: Nr. 6322B Brand: AMF Dimensions & specifications Height: 10 mm Overall length: 22 mm Nominal slot width: 14 mm Suitable for: M6 x 16 Designs & special features Product type: T-slot nut For fixed mounting Packaging unit: 1 UID: 4000833227NW Addition: B: 14 FAQ What slot width is this nut designed for? The nut is designed for a 14 mm nominal slot width and is specified accordingly for profile systems with that slot size. Which bolt size fits this component? This T-slot nut accepts M6 x 16 bolts for secure fastening in the designated T-slot. Is the nut suitable for fixed mounting applications? Yes, the T-slot nut No. 6322B is intended for fixed mounting, offering a stable interface for permanent or semi-permanent assemblies. What are the main dimensions to check for compatibility? Key dimensions are 22 mm overall length and 10 mm height; these determine fit and clearance within the profile and assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Bolt M12 L63mm Grade 10.9 With Nut And Washer, DIN 787 - AMF
Take advantage of the combination of DIN 787 conformity, Grade 10.9 strength and a precise M12 thread for reliable clamping in standard machine tables; order the part directly via Metav Werkzeuge or consult our advisors for application guidance. AMF T-slot bolt DIN 787 – M12 thread, 14 mm T-slot, 63 mm length The AMF T-slot bolt DIN 787 is a heavy-duty T-slot fastener designed for secure clamping on 14 mm T-slot machine tables, supplied complete with nut and washer for immediate installation DIN 787 standard compliance Fits 14 mm T-slots M12 thread with 63 mm length Grade 10.9 strength with nut and washer Dependable clamping for machining and fixturing The fastener is specified to DIN 787, which ensures consistent geometry and interchangeability across T-slot systems; this standardisation makes the component a dependable choice for production environments requiring reproducible clamping forces. With a Grade 10.9 rating, the bolt offers high tensile strength and resistance to shear loads, helping to maintain fixture integrity during intermittent and continuous machining cycles. The mechanical properties translate directly into reduced rework and fewer stoppages, supporting a more efficient workflow. Precision fit for standard T-slot tables Designed for a 14 mm T-slot, the shank geometry ensures positive seating and accurate alignment in common machine tables and modular fixtures. The M12 thread provides a familiar interface for clamping tooling, while the 63 mm overall length allows for sufficient engagement when used with workpieces, clamps and support blocks. Supplied complete with nut and washer, the fastener is ready for assembly, eliminating the need to source separate fastening hardware and simplifying inventory management. Practical assembly details and dimensional data Key dimensional additions are provided for integration: A: 13.7 mm, B: 45 mm, E: 22 mm, K: 8 mm, assisting in planning clearances and seating depths when designing or setting-up fixtures. The component is presented as a compact, purpose-built T-slot fastener that supports robust clamping without excess bulk, enabling close placement of clamps and efficient use of table space. Traceability is supported by the catalogue reference SKU 4000833317NW, which simplifies procurement and stock control. Contact Metav Werkzeuge for technical advice and to secure AMF T-slot bolts directly from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833317NW SKU: 4000833317NW Norm: DIN 787 Product type: T-slot bolt Brand: AMF Packaging unit: 1 Facts T-slot width: 14 mm Thread: M12 Overall length: 63 mm Strength class: Grade 10.9 Axial additions: A: 13.7; B: 45; E: 22; K: 8 Special features Supplied with nut and washer Conforms to DIN 787 Designed for machine table clamping Heavy-duty fastening for fixtures FAQ What slot size is this fastener intended for? The fastener is made for a 14 mm T-slot and will seat correctly in standard 14 mm machine table grooves. Which thread size does the bolt use? This T-slot bolt features an M12 thread, matching common clamping hardware and accessories for secure assembly. Is the bolt delivered ready for installation? Yes, the item is supplied complete with nut and washer, enabling immediate use upon installation. What strength class does the fastener have? The component is classified as Grade 10.9, providing high tensile strength suitable for demanding clamping tasks. How can the part be identified for ordering or restocking? Reference SKU 4000833317NW when ordering or checking inventory to ensure the correct AMF T-slot bolt is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Clamping Bolt Set M12 42-Piece Hardened Steel, Strength Class 8/10 - AMF
Take advantage of secure, industrial-grade clamping with hardened components and reliable M12 threads for consistent fixture performance; order directly via Metav Werkzeuge or consult our specialists for application advice. AMF Clamping screw set Nr. 6520 – T‑slot 14 mm, M12 thread The Clamping screw set Nr. 6520 is a workshop-ready clamping kit designed for secure fixturing in 14 mm T‑slots, suitable for general machine table and assembly applications For 14 mm T‑slots M12 threaded fastening Hardened parts, strength class 8 and 10 Complete kit in wooden case with hinged lid Reliable clamping for precision fixtures The set delivers robust clamping through a standard M12 thread matched to 14 mm T‑slots, enabling stable fixation on machine tables and modular fixturing systems. The thread geometry is optimised for repeated tightening cycles, so fixtures remain steady during machining or assembly. The kit is intended for industrial and workshop use where repeatability and positional stability are required; the design reduces setup time and minimises rework by keeping clamps centred and tensioned correctly. Compatibility with common T‑slot profiles makes this solution a practical choice for retrofit or new bench installations. Durability and service life engineered in All components in the kit are hardened parts, supplied in two strength classes (8 and 10) to balance toughness and maximum load capacity. Hardened fasteners resist deformation and thread wear under frequent use, which extends service intervals and lowers lifecycle costs compared with untreated alternatives. Strength classes indicate different tensile properties: the higher class provides greater resistance to shear and tensile stress in heavy clamping applications. For production environments where downtime is costly, the long-term reliability of hardened components supports continuous operation and fewer maintenance interruptions. Organised kit for efficient shop workflows Supplied as a complete kit in a wooden case with hinged lid, the components are organised for quick access and secure storage. The wooden container protects parts from dust and prevents loss between shifts, while the hinged lid simplifies inventory checks and transport. A compact, ready-to-use set reduces procurement complexity by bundling essential clamping pieces into a single item, allowing technicians to focus on setup rather than sourcing individual parts. Clearly identifiable components and straightforward arrangement streamline changeovers and support faster job completion on the shop floor. For tailored advice on the AMF clamping screw set Nr. 6520 and to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support and ordering information Technical data SKU: 4000833382NW Article number: Nr. 6520 Product type: Clamping screw set Brand: AMF Facts T‑slot width: 14 mm Thread: M12 Content: 42 pieces Packaging unit: 1 UID: 4000833382NW Special features For T‑slots All parts hardened Strength class 8 and 10 Complete in wooden case with hinged lid Comprehensive clamping kit FAQ What T‑slot profile is the set compatible with? The Clamping screw set Nr. 6520 is designed for 14 mm T‑slots and will fit tables and fixtures that accept a 14 mm T‑slot profile. Which thread size is used in the kit? The kit uses an M12 thread, specified in the Clamping screw set Nr. 6520, suitable for standard M12 clamping components. What does strength class 8 and 10 mean for daily use? Strength classes 8 and 10 in the Clamping screw set Nr. 6520 indicate graded tensile and shear resistance; class 10 items provide higher load capacity for heavier clamping needs. Are the components ready for industrial operation out of the box? Yes, the AMF Clamping screw set Nr. 6520 is supplied as a ready-to-use kit in a wooden case with hinged lid, prepared for immediate deployment in shop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Nut 12mm M10, DIN 508 - AMF
Take advantage of the combination of DIN-compliant design, robust M10 threading and clear dimensional data for dependable fixture assemblies; the compact form factor ensures simple integration into standard 12 mm T-slots. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot nut DIN 508 T-slot 12 mm M10 AMF — DIN 508-compliant fastening element with strength class 10 The T-slot nut DIN 508 T-slot 12 mm M10 AMF is a standardised machine-shop fastener made for secure clamping in 12 mm T-slots, offering an M10 internal thread and a compact height of 14 mm for versatile fixture applications Compliant with DIN 508 For 12 mm T-slots M10 internal thread Strength class 10 Consistent clamping performance for fixture systems The nut is designed for consistent mechanical engagement in standardised T-slots, delivering repeatable clamping action when combined with appropriate bolts and clamping elements. Thanks to the M10 internal thread and strength class 10, the fastener provides a high-grade connection for common workshop and industrial fixtures. The dimensional parameters are compact—height 14 mm—which supports space-saving setups while maintaining sufficient thread depth for robust load transmission. This makes the component suitable for modular fixturing where predictable behaviour under preload is essential. Clear standardisation eases specification and procurement Built to DIN 508, the fastener can be specified with confidence in drawings and bills of materials; the conformity reduces ambiguity in procurement and assembly. The designation 12 mm T-slot describes the slot width the nut is intended for, so compatibility checks become straightforward during planning. Where technical clarity is required, the SKU 4000833203NW and the standard reference simplify order handling and inventory control, reducing time spent on verification and speeding up procurement cycles. Measured dimensions and application-oriented values Key application values are provided to support machining and fixture design: T-slot 12 mm, thread M10, and the axial dimensions given as A 11.7 mm, E 18 mm, K 7 mm support precise positioning and load calculations. The listed strength class 10 denotes a high-strength fastener grade, making the component suitable for demanding clamping tasks where elevated preload and shear resistance are required. Where unfamiliar, the strength class indicates the fastener's mechanical grade rather than surface finish—selection should match the mechanical demands of the assembly. Integration, handling and stock management benefits The product’s compact geometry simplifies insertion into grooves and allows rapid assembly with standard M10 bolts. Supplied in single-unit packaging, the item is easy to store and manage in small quantities or to include in kitted assemblies. Traceability is supported by the catalog reference and label data, which assist workshop managers in matching replacements and maintaining consistent quality across multiple machines or jigs. Practical handling considerations—such as the nut’s orientation and thread engagement—are compatible with common clamping workflows and standard tooling. For standard-compliant and reliable fixturing with the AMF T-slot nut, contact Metav Werkzeuge for expert advice and assured supply from Emmerich — fast, transparent and tailored to industrial requirements. Technical data Article number: 4000833203NW Label: T-Nutenstein DIN 508 T-Nut 12mm M10 AMF Manufacturer: AMF Product type: T-slot nut Packaging unit: 1 Facts Height: 14 mm T-slot width: 12 mm Thread: M10 Standard: DIN 508 Strength class: 10 A: 11.7 mm E: 18 mm K: 7 mm Special features DIN 508 conformity Intended for 12 mm T-slots M10 internal thread Compact height for space-saving fixtures FAQ What T-slot width is this nut designed for? The nut is intended for a 12 mm T-slot, matching standard 12 mm slot profiles used in machine tables and fixturing systems. Which thread size is provided in the fastener? This fastener features an M10 internal thread suitable for M10 bolts and clamping screws. Is the nut compliant with industry standards? Yes, the component is manufactured to DIN 508, ensuring consistent dimensions and interchangeability for industrial applications. What does strength class 10 mean for assembly use? Strength class 10 indicates a high mechanical grade for the fastener, making it suitable where increased preload and shear resistance are required in clamping applications. How can the SKU be used during ordering? Refer to SKU 4000833203NW when ordering or checking inventory to ensure the correct DIN 508 T-slot nut variant is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Nut M10 DIN 508 16mm Height, Strength Class 10 - AMF
Take advantage of the combination of DIN 508 conformity and a sturdy M10 thread for dependable fixture assemblies, together with a 14 mm T-slot fit for straightforward integration into standard machine tables. Order the component directly via Metav Werkzeuge or consult our technical team for application advice. T-Nutenstein (DIN 508) Werksnorm T-Nut 14mm M10 AMF — robust M10 thread, 14 mm T-slot fit T-Nutenstein (DIN 508) Werksnorm T-Nut 14mm M10 AMF is a precision T-slot nut designed for secure clamping in standard 14 mm T-slot profiles, suitable for industrial and workshop fixturing. DIN 508 standardised design M10 internal thread for secure fastening Fits 14 mm T-slot profiles 16 mm height for stable clamping Reliable clamping where repeatability matters The T-slot nut offers a standardised interface thanks to DIN 508 conformity, which ensures predictable geometry when assembling fixtures and clamps. Its M10 thread combined with a 14 mm T-slot fit provides a compact yet firm connection, reducing play and alignment effort during setup. This standardisation speeds up changeovers on machine tables and contributes to consistent repeatability across production runs. Designed for straightforward integration and time savings With a nominal height of 16 mm, this component sits flush in many conventional T-slot profiles, enabling a low-profile connection that keeps tooling clear of obstructions. The concise geometry simplifies handling during assembly, which translates into measurable time savings on repetitive clamping tasks. The specification line showing A: 13.7, E: 22, K: 8 denotes the relevant dimensional references used for precise seat geometry and compatibility checks. Built for industrial stress and long service life The nut’s strength class 10 indicates a high tensile capability for demanding clamping applications, making it suitable where a secure hold under load is essential. In practice, this means fewer retightening cycles and higher process reliability. The robust mechanical class reduces the risk of thread deformation when used with matching bolts, supporting continuous operation in manufacturing environments. Practical compatibility and application guidance Common applications include machine tables, modular fixturing systems and jigs where standard 14 mm T-slots are present. The component is intended for use with M10 bolts and is best paired with compatible washers and clamps to distribute load evenly. For specific material or profile checks, refer to machine table documentation or contact our technical advisers for confirmation of fit and suitability. For supply, specification checks or fitment advice contact Metav Werkzeuge—our specialists at info@metav-werkzeuge.com or +49 2822 7131930 will advise on integration and delivery options. Technical data Article number: 4000603162NW SKU: 4000603162NW Brand: AMF Product type: T-slot nut Standard: DIN 508 Facts Height: 16 mm T-slot width: 14 mm Thread: M10 Packaging unit: 1 Axite enrichment: A: 13.7; E: 22; K: 8; Strength class: 10 Special features DIN 508 conformity Strength class 10 Compact low-profile design Suitable for standard machine tables and modular fixturing FAQ What size T-slot does this nut fit? The nut is designed for 14 mm T-slot systems and provides a standard fit for corresponding profiles. Which thread size is provided and what fastener should be used? This part features an M10 thread; use an M10 bolt of suitable class and length for the intended clamp assembly. Is the component compliant with any standards? Yes, the product conforms to DIN 508, which standardises the geometry for T-slot nuts and ensures interchangeability. How does the strength class affect use? The strength class 10 indicates a high tensile capability, improving resistance to deformation under load and supporting secure clamping in industrial applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Nut M8 DIN 508 16mm Height, Strength Class 10 - AMF
Benefit from the reliable fit of the DIN 508 standard, the secure M8 threaded fastening and the precise 14 mm T‑slot compatibility for dependable clamping and quick assembly; order directly via Metav Werkzeuge or contact our advisers for detailed application support. AMF T-slot nut (DIN 508) – 14 mm T-slot, M8 thread The AMF T-slot nut (DIN 508) provides a standardised fastening element for machine tables and fixture systems, offering secure M8 thread engagement in 14 mm T-slots for industrial clamping and modular jig construction. DIN 508 compliant design 14 mm T-slot compatibility M8 threaded fastening High-strength class 10 Faster, more secure clamping with standard conformity The combination of a DIN 508 specification and a precise 14 mm T-slot geometry reduces setup uncertainty and ensures interchangeability across machine tables and modular fixtures. Standard conformity simplifies procurement and maintenance planning, as replacement parts match existing profile systems without trial fittings. The robust M8 thread provides a proven connection for medium-duty clamping tasks, while the defined geometry keeps lateral play to a minimum, supporting repetitive positioning and saving time during changeovers. Robust performance and material handling reassurance Manufactured for repeatable clamping, this component delivers a high-strength connection thanks to its strength class 10 rating and M8 thread form. The compact profile with a nominal height of 16 mm is suitable for many standard machining tables and workbench systems, allowing reliable load transmission without excessive bulk. Where process stability and secure fixation are required, the engineered geometry helps maintain clamping force and reduces the risk of loosening under vibration, contributing to consistent machining results and fewer setup-related rejects. Simple specification and integration for engineering teams Engineers and workshop planners benefit from clear, measurable specifications: 14 mm T-slot fit, M8 metric thread and compliance with an established DIN standard. These characteristics make planning straightforward and reduce the need for on-the-spot adjustments. The component’s documented dimensions and strength class facilitate calculations for clamping forces and safety factors, enabling rational decisions during fixture design and assembly. For procurement, the clear SKU and specification support repeatable ordering and part-tracking within inventory systems. Contact Metav Werkzeuge for procurement guidance and application advice on this AMF T-slot nut; our team in Emmerich can confirm suitability for specific machines and supply quantities to match production requirements. Technical data Article number: 4000603161NW Manufacturer: AMF Standard: DIN 508 SKU: 4000603161NW Facts Height: 16 mm T-slot width: 14 mm Thread: M8 Strength class: 10 Special features AMF brand T-slot nut Packaging unit: 1 Axite additions: A: 13.7; E: 22; K: 8 FAQ Is this component compatible with 14 mm T-slots? Yes. The AMF T-slot nut is specified for a 14 mm T-slot and is designed to fit standard 14 mm profiles without modification. What thread size does the nut accept? The part features an M8 threaded bore, providing conventional metric mating for bolts and studs. Does the nut conform to an established standard? The nut is made to DIN 508, ensuring compatibility and interchangeability with systems designed to that standard. What is the height of the nut and how does that affect clamping? The nut has a height of 16 mm, offering a compact profile that supports reliable clamping force while fitting common table and fixture geometries. What strength class applies to this fastening element? This item is rated strength class 10, indicating a high-strength fastening suitable for demanding clamping situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Clamping Base Nr. 6500E Size 2 Universal, H Min. 39 H Max. 107 - AMF
Take advantage of a compact, universal clamping underlay set that offers a broad adjustable height range for flexible fixture setups; the combination of simple integration and reliable support helps keep clamping cycles consistent and reduces setup time. Order or request further application advice via Metav Werkzeuge for fast supply from Emmerich. AMF clamping underlay set No. 6500E – Size 2, adjustable 39–107 mm The AMF clamping underlay set No. 6500E – Size 2 is a universal support solution for workshop and industrial clamping tasks, designed to bridge jaw differences and secure varied workpieces with stability. Universal clamping underlay set from AMF Adjustable height range 39–107 mm Compact format A 35.5 × B 30 × C 66 Reliable support that shortens setup time The clamping underlay set provides a stable support surface that is intended to reduce repeated repositioning during setup. By offering a consistent bearing area beneath the clamped workpiece, the set helps to distribute clamping forces evenly, which can lower the likelihood of workpiece distortion and speed up the overall fixture process. Operators will find that fixtures require fewer intermediate adjustments when a dedicated support plate is used, making repetitive production runs more efficient while maintaining repeatability. Precision adjustment across a wide height range Designed with an adjustable height from 39–107 mm, the set allows compensation for differing jaw heights and workpiece thicknesses without additional shims. The specified dimensions A 35.5 mm, B 30 mm and C 66 mm describe the compact footprint and clearance values that make the underlay easy to position inside standard vises and clamping fixtures. These measurable parameters support planning and help integrate the component into existing clamping systems; installers can match the values to jaw geometry to ensure correct seating and safe force transfer. Universal compatibility for workshop and production use Built for versatility, the set is intended for broad application across toolrooms, maintenance workshops and light production environments where flexible fixturing is required. The universal design reduces the need for multiple bespoke supports, saving space and simplifying inventory. The low-profile format supports accessibility to the clamping area while protecting key contact surfaces; in practice, this can extend the lifetime of jaw faces and reduce maintenance intervals for clamping equipment. Contact Metav Werkzeuge for tailored advice on application scenarios and to secure supply of the AMF clamping underlay set directly from our Emmerich stock Technical Data Article number: 4000833091NW Type designation: Nr. 6500E - 2 Product name: Clamping underlay set No. 6500E Size 2 Brand: AMF Product category: Clamping underlay set Packaging unit: 1 UID: 4000833091NW Facts H min: 39 mm H max: 107 mm A: 35.5 mm B: 30 mm C: 66 mm Special features Universal application for varied clamping tasks Compact footprint for easy integration Intended to support consistent clamping force distribution Simple handling for faster setup FAQ What height range does the clamping underlay set cover? The AMF clamping underlay set No. 6500E – Size 2 covers an adjustable height range from 39 mm to 107 mm for compensating jaw and workpiece variations. Is the set suitable for integration in standard vises and fixtures? Yes, the compact dimensions (A 35.5 mm, B 30 mm, C 66 mm) are intended to facilitate integration with common vise and fixture geometries. Which applications are typical for this clamping underlay set? The set is suited to workshop fixturing, toolroom use and light production environments where a universal support is required to level or lift workpieces during clamping. Is the material specified for the underlay set? No specific material information is provided for the AMF clamping underlay set in the available data. How many sets are supplied per packaging unit? The product is listed with a packaging unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Clamping Pad Set Universal Size 3 H Min 71 H Max 208 - AMF
Combining an adjustable height range (71–208 mm) with universal applicability, this clamping shim set delivers reliable, repeatable support across varied clamping tasks; order the AMF unit directly via Metav Werkzeuge or consult our specialists for tailored advice. AMF Clamping shim set Nr. 6500E - 3 — Adjustable height 71–208 mm AMF Clamping shim set Nr. 6500E - 3 provides a versatile support solution for workshop and production clamping, offering a wide height range and compact size for standard fixture setups Adjustable height 71–208 mm Universal application for clamping Size 3 for standard setups Single-piece packaging for easy stocking Faster, more reliable set-ups through adjustable support The AMF clamping shim set Nr. 6500E - 3 reduces fixture fine-tuning by offering a clear adjustable height range from 71 to 208 mm, enabling fewer intermediate shims and quicker cycle starts. The controlled height increments cut down on set-up variance, increasing clamping accuracy and lowering scrap rates. For production environments, this translates into measurable time savings per job and improved throughput without compromising positional repeatability. Consistent support that suits many tasks The combination of dimensions A: 68 mm, B: 30 mm and C: 131 mm delivers a stable bearing surface that resists tilting under load. The unit’s universal application makes it suitable for a wide range of clamping tasks in the workshop, where consistent vertical support is required. Using defined dimensional data simplifies fixture planning and allows engineers to standardise processes, reducing the number of bespoke supports needed across different jobs. Practical handling and integration in workflows Designed as a compact clamping shim set, the product is supplied as a single packaged unit for straightforward inventory management. Its clear specification allows rapid assessment during job planning and makes it simple to include in standard operating procedures. The modular nature of height adjustment supports incremental optimisation of clamping forces, which helps maintain component integrity during machining and assembly operations. Durable performance that supports quality control With clearly stated geometry and a wide height span, the set supports reproducible clamping sequences and aids quality assurance measures. The defined heights enable easier measurement and documentation of fixturing parameters, improving inspection traceability. By standardising on components with documented dimensions, shops can reduce variability between shifts and operators, contributing to long-term process stability. For a reliable clamping standard from AMF, contact Metav Werkzeuge for expert guidance and procurement at Metav’s Emmerich location — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixturing requirements Technical data Article number: 4000833092NW Type: Nr. 6500E - 3 Label: Spannunterlage Nr.6500E Gr.3 universell einsetzbar AMF Manufacturer: AMF Product type: Clamping shim set Packaging unit: 1 UID: 4000833092NW Dimensions / Core data Height min: 71 mm Height max: 208 mm A: 68 mm B: 30 mm C: 131 mm Special features Universally applicable for clamping tasks Size: Gr.3 Single-piece packaging FAQ What height range does the clamping shim set cover? The AMF clamping shim set Nr. 6500E - 3 covers an adjustable height range of 71–208 mm, suitable for a variety of fixture heights. Is this product suitable for general workshop use? Yes, the unit’s universal application and defined dimensions make it appropriate for general workshop and production clamping tasks. How is the product supplied? The clamping shim set is supplied as a single packaged unit (packaging unit: 1), simplifying stock handling. Can the shim set improve set-up times? Using the defined height range and standardised dimensions reduces the need for custom shims and helps shorten fixture set-up times. What is the article number for ordering? Order reference: Article number 4000833092NW, Type Nr. 6500E - 3 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Parallel Gauge Set Pairwise Ground, Hardened, Size Marked, 0.01mm Pair Tolerance - AMF
Take advantage of a durable, case‑hardened construction and pairwise plan‑parallel grinding for consistent setups; combined with clear size markings and a compact wooden box, the set streamlines fixture preparation and repeatable adjustments. Order the AMF Parallel shim set Nr. 6347S directly via Metav Werkzeuge or ask our consultants if needed. AMF Parallel shim set Nr. 6347S — 150 mm standard length, 14 pairs Parallel shim set Nr. 6347S for precise height compensation and fine adjustment tasks in metalworking, toolmaking and precision setup applications. Standard wooden case with removable lid Case-hardened for durable wear resistance Pairwise ground and plan‑parallel accuracy Size markings and 0.01 mm pair tolerance Consistent, measurable accuracy for precise setups The set delivers reliable precision through pairwise fine grinding that ensures plan‑parallel contact faces and a documented pair tolerance of 0.01 mm, making it suitable where repeatability matters. Such tight control of thickness minimises cumulative error when stacking shims during fixturing or measurement tasks, so setups remain within predictable limits and rework is reduced. The result is faster alignment and fewer inspection iterations on the production floor. Robust treatment for long service life and stable reference A case‑hardened finish provides wear resistance and maintains contact surfaces under repeated use, preserving the original thickness and surface integrity over time. This hardening reduces the need for frequent replacement and helps maintain stable reference heights in jigs and fixtures. The mechanical resilience therefore contributes directly to lower downtime and a steady quality output in everyday workshop operations. Organised handling and straightforward identification Each shim carries size markings to speed selection and limit handling errors, while the wooden box with a removable flap lid keeps the components protected and readily accessible at the bench. Clear labelling and neat storage reduce search times during set‑up changes, improving workflow efficiency in busy environments. The compact storage solution supports tidy tool stations and faster job changeovers. Conformity and traceable tolerances for quality assurance Nominal tolerances are applied in accordance with DIN ISO 2768m, ensuring dimensional consistency across the set and compatibility with standardised tooling workflows. Where a tight pair tolerance is required, this conformity simplifies inspection and documentation processes, supporting quality control regimes and audit trails. The combination of standardised tolerances and precise manufacturing aids verification and integration into certified production processes. For workshop‑grade precision and dependable durability, contact Metav Werkzeuge to secure the AMF Parallel shim set Nr. 6347S and receive expert advice from our Emmerich team. Technical Data Article number: 4123321010NW Type: Nr. 6347S Product: Parallel shim set Brand: AMF Core data Length: 150 mm Content: 14 pairs Pair tolerance: 0.01 mm Packaging unit: 1 Special features Case-hardened Pairwise ground and plan‑parallel Size markings on each shim Wooden box with removable flap lid Nominal tolerances according to DIN ISO 2768m FAQ What accuracy can be expected from these shims? The AMF Parallel shim set Nr. 6347S provides a documented pair tolerance of 0.01 mm, ensuring high repeatability for stacking and fine adjustments. How is the set supplied and stored? The set is supplied in a wooden box with a removable flap lid; each shim is marked for easy identification and organised storage. Are the dimensional tolerances standardised? Yes, nominal tolerances for the set comply with DIN ISO 2768m, providing traceable conformity for quality assurance and integration into standard workflows. Is the construction suitable for frequent workshop use? The case‑hardened treatment and ground surfaces of the AMF set offer wear resistance and stable reference dimensions under repeated handling. Can the shims be used for precise fixture adjustments and measurement setups? Designed for height compensation and setup tasks in metalworking and toolmaking, this parallel shim set serves as a reliable element for precise fixture and measurement preparations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Parallel Shim Set Pair-Matched Ground 24 Pairs, Hardened, 0.01mm Height Tolerance IT5 - AMF
Benefit from precise, wear-resistant shims with fine pair-matching and tight height tolerances for reliable set-up and inspection. Combine case-hardened durability, pairwise fine-ground accuracy and a practical 1 mm increment range for efficient workshop operation. Order the set directly via Metav Werkzeuge or consult the technical team for application advice. Parallel shim set Nr. 6348P - 150 — Precision pair-matched shims, 150 mm length (AMF) A Parallel shim set Nr. 6348P - 150 designed for precision shimming and spacing in clamping, inspection and jigging applications across metalworking workshops Precision ground in matching pairs Case-hardened for long-term wear resistance Set provides 1 mm increments Nominal height tolerance ±0.01 mm Precise pairing for repeatable, measurable set-ups The set is manufactured to deliver consistent thickness across mating pairs, with a declared pair tolerance (IT 5) and a nominal height tolerance of ±0.01 mm. These specifications ensure that each paired shim behaves predictably under load, reducing adjustment time during fixture assembly and inspection. IT grades and micron-level tolerances are standard ways to quantify manufacturing precision; in practice this means the shims support reproducible component positioning and reliable measurement transfer between setups. Hardening and surface finish that extend service life The shims are case-hardened, giving a hardened surface layer that improves resistance to wear and indentation while retaining a tough core. Surface treatment combined with fine-ground, flat-parallel finishing minimises local deformation when used between clamping faces. Case-hardening (surface carburising) creates a durable contact surface without making the entire part brittle, which is particularly advantageous for frequent re-use in workshop and inspection environments where small deviations affect final tolerances. Practical range and workflow benefits for workshops Contained as a matched set of 24 pairs with a nominal length of 150 mm, the kit covers a sensible stepping range in 1 mm increments, allowing rapid selection of the required build-up without time-consuming custom shimming. The modular range reduces the number of components needed in inventories and speeds up vice, fixture and gauge set-ups. For toolmakers and inspection technicians, the clear increments and matched pairs translate directly into fewer iterative adjustments and shorter machine downtime. Compliance, handling and storage that support precision Manufactured and ground to meet common engineering drawing conventions and dimensional control (remaining dimensions per DIN ISO 2768m where applicable), the set is supplied prepared for immediate workshop use. The fine-ground surfaces and defined tolerances simplify calibration routines and reduce the need for extra surface preparation. Packaged for workshop handling, the set maintains organisation and protects the ground faces during transport and storage, helping to preserve the declared specifications over time. For application-specific advice or to arrange supply of the AMF Nr. 6348P - 150 parallel shim set, contact Metav Werkzeuge in Emmerich; technical consultants can advise on selection and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 4123321022NW Type: Nr. 6348P - 150 Product: Parallel shim set Brand: AMF Content: 24 pairs Length: 150 mm Facts Pair tolerance: IT 5 Height tolerance: ±0.01 mm Increment: 1 mm Special features Case-hardened surface Pairwise fine-ground, flat-parallel Sets cover range with 1 mm steps Supplied for workshop use FAQ What tolerance can be expected from these shims? The parallel shim set Nr. 6348P - 150 is specified with a pair tolerance of IT 5 and a nominal height tolerance of ±0.01 mm, providing stable, measurable accuracy for precision set-ups. How many shims are included and what increments do they cover? The AMF parallel shim set contains 24 pairs and is arranged to provide 1 mm incremental build-up across its useful range. Are these shims suitable for frequent clamping use? Yes; the case-hardened surface and fine-ground finish make the shims resistant to wear and suitable for repeated clamping and inspection tasks without rapid degradation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Hexagon Nut DIN 6330B M10 Strength Class 10, SW17 - AMF
Take advantage of a compact, standard-compliant fastening solution that combines M10 compatibility with strength class 10 for robust joints; order the component directly via Metav Werkzeuge or consult our specialists for quick supply and industrial guidance. Hexagon nut DIN 6330B M10 – Strength class 10, SW 17 mm (AMF) A hexagon nut DIN 6330B M10 designed for high-tensile mechanical connections in industrial and maintenance applications. DIN 6330B standardised fastening Strength class 10 for high tensile loads SW 17 mm for use with standard spanners 15 mm overall height for compact assemblies Secure connections for high-load applications The strength class 10 rating marks this fastener as suitable where elevated tensile strength and reliable clamping force are required. Specified to the DIN 6330B standard, the component ensures a predictable mechanical performance that integrates with established bolt grades and assembly procedures. For engineers and buyers, this means fewer unexpected failures and a measurable improvement in joint safety without altering existing bolting practices. Time-saving compatibility and straightforward assembly With an M10 thread size and SW 17 mm key width, the nut mates with commonly used bolts and hand tools in workshops and production lines. The hexagon geometry provides a secure interface for spanners and sockets, reducing slippage and assembly time. The defined corner dimension 18.9 mm and standardised profile simplify inventory planning: one specification fits multiple applications, lowering complexity across maintenance schedules. Compact design for constrained installations An overall height of 15 mm affords a compact profile that suits installations with limited axial space while retaining the mechanical advantages of a high-strength fastener. The combination of compactness and elevated strength class supports retrofits and new builds where both space savings and load-bearing capacity are priorities. In short, the component offers a practical balance between dimensions and performance for tight assemblies. Industrial-grade reliability and procurement clarity Supplied under the AMF designation and identified by SKU 4000833393NW, the nut provides traceability for procurement and quality control. The standard compliance and clearly stated mechanical class help maintenance planners and production engineers make evidence-based choices. For supply chains that value consistency, the specification reduces ambiguity in ordering and quality checks, supporting predictable uptime and simpler stock management. For reliable supply of AMF fastening hardware and expert procurement advice, contact Metav Werkzeuge to secure stock and specification support via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 4000833393NW Type: M10 Standard: DIN 6330B Manufacturer: AMF Product type: Hexagon nut Facts Key width: 17 mm Overall height: 15 mm Corner dimension: 18.9 mm Strength class: 10 Packaging unit: 1 Special features Hexagon geometry Standard-compliant fastening element Designed for high-tensile applications FAQ What applications is this nut suitable for? The hexagon nut DIN 6330B M10 by AMF is suited for industrial assemblies requiring a compact, high-strength fastening element and is commonly used in machinery, fixtures and maintenance tasks. How does strength class 10 affect performance? Strength class 10 indicates higher tensile capacity and improved clamping reliability; when paired with corresponding bolts, the AMF M10 nut supports joints with elevated mechanical loads. Is this nut compatible with standard spanners? Yes, the nut’s SW 17 mm key width matches standard 17 mm spanners and sockets, enabling quick assembly and routine maintenance. How is the product identified for ordering and traceability? Order and inventory using SKU 4000833393NW; the designation links the component to its DIN 6330B specification and AMF branding. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Hexagon Nut M10 SW16 Forged And Machined Strength Class 10, DIN 6331 - AMF
Take advantage of a DIN‑standardised fastening solution with M10 thread and strength class 10, combining high load capacity, precise dimensions and secure assembly. Order the part directly via Metav Werkzeuge or consult the team for application advice. Hexagon nut DIN 6331 M10 — pressed and milled, strength 10 (AMF) The hexagon nut DIN 6331 M10 is a high‑strength fastening component designed for machine construction and industrial assembly tasks. DIN 6331 standardised geometry Strength class 10 for heavy loads SW 16 mm across flats Pressed and milled finish for precise seating Reliable performance under mechanical load Designed to meet DIN 6331, this hexagon nut delivers predictable mechanical behaviour and consistent torque response. The strength class 10 rating signifies elevated tensile capacity compared with lower classes, making the nut suitable for demanding fastening tasks in production environments. By choosing a component specified to a recognised standard, assembly planners and purchasing engineers benefit from reduced variance in joint performance and simplified quality control. Precision fit for repeatable assembly Dimensional accuracy is central to dependable joints: the nut provides SW 16 mm across flats, an overall height of 15 mm, and a corner dimension of 17.8 mm, aligning with standard spanner sizes and clamping interfaces. The combination of cold‑forming (pressed) manufacture and milled bearing faces ensures flat seating and uniform load distribution, which minimises the risk of uneven clamping and extends service life of bolted connections in fixtures and machinery. Suited to industrial workflows and maintenance routines This hexagon nut supports efficient workshop processes through standardised handling and simple tool compatibility, reducing assembly time and changeover complexity on the shop floor. Stocking a DIN‑compliant, strength‑rated nut streamlines supply chains and maintenance schedules, while consistent part geometry eases automated assembly and inspection procedures. Reliability in every joint contributes to lower downtime and predictable product performance. For secure, DIN‑conforming fixings supplied by a trusted partner, request availability of the AMF hexagon nut M10 (SKU 4000833407NW) from Metav Werkzeuge — technical advisors are available for specification checks and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833407NW Type: M10 Standard: DIN 6331 Product type: Hexagon nut Brand: AMF Facts Overall height: 15 mm Across flats (SW): 16 mm Corner dimension (E): 17.8 mm Strength class: 10 Packaging unit: 1 Special features Pressed and milled manufacture Standardised geometry for spanner fit Designed for machine construction and assembly FAQ What material is the nut made from? The product label does not specify material for the hexagon nut 4000833407NW; material details should be confirmed with Metav Werkzeuge if required for the application. Is this nut compatible with standard M10 bolts? Yes, the DIN 6331 M10 nut is intended for M10 threads and matches common M10 bolt threads when both conform to the same thread standard. What does strength class 10 indicate for this nut? Strength class 10 denotes a higher tensile resistance compared with lower classes, indicating suitability for applications with elevated clamping forces and mechanical loads. Can the nut be used in precision assemblies requiring flat seating? The pressed and milled bearing faces provide improved flat seating and uniform load distribution, making the part suitable for assemblies where consistent clamping is important. Is the across‑flats size compatible with standard tools? The nut features a 16 mm across‑flats dimension (SW 16 mm), compatible with standard spanners and sockets used in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Hexagon Nut M10 Sw17 Pressed And Milled Strength Class 10, DIN 6331 - AMF
Take advantage of the combination of recognised DIN conformity, strength class 10 performance and precise dimensions for reliable fastening in production environments; order directly via Metav Werkzeuge or consult the team for application advice. Hexagon nut M10 (DIN 6331) by AMF — strength class 10, SW 17 mm The hexagon nut M10 by AMF designed for standardised industrial assemblies, offering robust clamping force and compatibility with DIN‑rated components. Hexagon nut M10 to DIN 6331 Strength class 10 for high preload SW 17 mm for standard spanner fit Pressed and milled for consistent faces Secure bolted joints with high clamping reliability Manufactured to DIN 6331, this fastener provides a predictable interface for threaded connections where consistency matters. The designation M10 indicates the nominal thread size, while strength class 10 signals a high tensile capability compared with lower classes; this permits higher preload and reduces the risk of loosening under dynamic loading. Where joint integrity affects production continuity, the measurable performance of this component supports safer torque settings and predictable assembly behaviour, translating into fewer stoppages and reduced rework. Accurate geometry for efficient installation and tool compatibility The combination of SW 17 mm across flats and a height of 15 mm yields a compact profile that is simple to access with standard hand tools. The stated corner size of 18.9 mm ensures compatibility with typical sockets and torque tools, and the pressed‑and‑milled finish produces uniform bearing faces that aid even load distribution. For procurement and assembly planning, these precise dimensions enable correct tool allocation and predictable torque application, which in turn shortens assembly times and improves repeatability on production lines. Practical benefits for workshops and industrial users This nut suits maintenance and assembly tasks where DIN conformity and elevated strength are required, such as machine frames, jigs and fixtures, or critical structural fastenings. The straightforward specification—standard thread type, documented dimensions and class 10 rating—simplifies inventory lists and ensures interchangeability with other DIN‑compliant components. Combined with Metav’s logistics presence in Emmerich, the part supports steady supply and rapid replenishment, helping to maintain uptime and build confidence in daily operations. For robust M10 fastening with strength class 10 and to discuss suitability for specific assemblies, contact Metav Werkzeuge in Emmerich for supply and technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical details Article number: 4000833408NW Type: M10 Standard: DIN 6331 SKU: 4000833408NW Facts Height: 15 mm Across flats (SW): 17 mm Corner size: 18.9 mm Packaging unit: 1 Special features Strength class: 10 Surface/process: pressed and milled Product type: hexagon nut FAQ What strength rating does this nut have? The hexagon nut is specified as strength class 10, indicating suitability for higher preload applications compared with lower classes. Is this nut compatible with standard M10 bolts to DIN norms? Yes, the Hexagon nut M10 (DIN 6331) is designed for compatibility with standard M10 threaded bolts manufactured to DIN specifications. What are the key dimensions to consider for tool selection? Key dimensions are SW 17 mm across flats and a height of 15 mm, with a corner size of 18.9 mm for socket and torque tool selection. Can this nut be used in dynamic assemblies subject to vibration? The higher strength class 10 and uniform bearing faces produced by pressing and milling improve clamp load retention, making this nut suitable for dynamic conditions when used with appropriate locking measures. What is the full identifier for ordering? Order reference: Hexagon nut M10 DIN 6331, AMF, SKU 4000833408NW Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Washer DIN 6340 For M14 Bolts, S5 D40 - AMF
Take advantage of the DIN 6340 conformity, precise 15 mm bore and direct compatibility with M14 fastenings for reliable seating and consistent load distribution in assembly operations. Order the AMF washer directly via Metav Werkzeuge or ask our consultants if further specification is required. AMF U-washer DIN 6340, 15 mm bore — flat washer for M14 bolts The AMF U-washer DIN 6340 is a standardised flat washer designed to provide secure seating and even load transfer for M14 bolts in industrial and mechanical assemblies. DIN 6340 standard compliance 15 mm precision bore Suitable for M14 bolts 5 mm solid thickness, 40 mm outer diameter Consistent seating and load distribution for bolted joints The washer is manufactured to the DIN 6340 dimensional and tolerance framework, delivering predictable mechanical behaviour in assemblies. As a flat washer, it increases the contact area under a screw head or nut, which reduces surface pressure on the joint and helps prevent indentation or loosening under cyclic loads. The 15 mm bore (D1) ensures a precise fit on M14 threaded parts, while the 40 mm outer diameter (D2) provides a stable bearing surface. These characteristics support longer service life of bolted connections and fewer rework operations in production environments. Simple specification and installation reduce assembly uncertainty With clearly defined dimensions — D1: 15 mm, D2: 40 mm, S: 5 mm — the component simplifies parts lists and quality control procedures. The standardised sizing allows straightforward substitution in repair and maintenance workflows without time-consuming fitting trials. Because the part is specified to established tolerances, planners and buyers can rely on consistent interchangeability across batches, which streamlines procurement and inventory management in workshops and industrial stores. Suitable applications and practical benefits in production The washer is intended for use wherever M14 fastenings require a stable seating plane: structural assemblies, machine frames, flanged connections and general plant maintenance. Its measured thickness of 5 mm gives a robust spacer function, while the defined bore reduces the risk of misalignment during installation. For engineers and fitters, the part functions as a small but critical device that helps achieve secure torque transfer and maintain joint integrity under vibration and regular operation. Contact Metav Werkzeuge for supply and specification support on the AMF DIN 6340 washers — our Emmerich team provides procurement assistance and technical clarification to ensure fit and function on the shop floor Technical data Article number: 4000833439NW Standard: DIN 6340 Brand: AMF Product type: Flat washer Facts Suitable for: M14 Bore diameter D1: 15 mm Outer diameter D2: 40 mm Thickness S: 5 mm Packaging unit: 1 Special features Label: U-washer for M14 bolts, 15 mm bore SKU: 4000833439NW UID: 4000833439NW FAQ What bolt size is this washer intended for? The AMF U-washer DIN 6340 is specified for M14 bolts and has a 15 mm bore to match that thread size. Does the data specify the material or coating? Material and coating are not provided in the available product data for the AMF U-washer DIN 6340 (SKU 4000833439NW). How do the dimensions support load distribution? The 40 mm outer diameter increases bearing area while the 5 mm thickness provides a stable spacer, together ensuring improved load distribution and reduced surface pressure. Is this washer compatible with standard DIN practice? Yes, the washer conforms to DIN 6340, which defines the required dimensions and tolerances for this type of flat washer. Can this washer be used in structural assemblies and machine maintenance? The washer is suitable for structural and mechanical applications where M14 fastenings require consistent seating and reliable torque transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16-65mm Clamping Wedge For T-Slot 20mm With M20x160 Clamping Screw - AMF
Benefit from proven T‑slot compatibility and a wide clamping height range for flexible, secure workholding; the set includes a ready-to-fit M20 clamping screw for immediate use. Order the clamping iron directly via Metav Werkzeuge or ask our consultants if needed. Clamping iron No. 6314V — clamping bar for 20 mm T‑slots with 16–65 mm adjustable height (AMF) A Clamping iron No. 6314V designed for 20 mm T‑slots, offering adjustable clamping heights for versatile fixturing in milling and drilling operations For 20 mm T‑slots Adjustable clamping height 16–65 mm Includes M20 x 20 x 160 clamping screw Robust 22 mm jaw width Secure, adjustable clamping for varied workpieces The Clamping iron No. 6314V delivers a pragmatic solution where versatility matters. Compatible with a 20 mm T‑slot, the device provides a 16–65 mm clamping range that reduces the need for multiple jaw sizes and simplifies setup. The adjustable height enables stable contact across differing workpiece profiles, so fixtures remain firm during cutting or drilling. This results in more consistent machining outcomes and fewer interruptions for readjustment. Ready-to-use hardware reduces setup time Equipped with a M20 x 20 x 160 clamping screw, the assembly is ready for immediate installation, shortening preparation phases on the machine table. The combination of a 22 mm jaw width and 160 mm overall length offers a balanced contact surface that improves load distribution and reduces point stress. A standard M20 thread ensures compatibility with common clamping systems, enabling quick exchange and straightforward maintenance of workholding elements. Practical applications and reliability in the workshop Designed for typical shopfloor environments, this AMF clamping component suits machine vices, milling tables and bespoke fixtures where robust holding is required. The compact footprint supports precise positioning while the dimensioned design minimises vibration during machining. Specified geometry and included screw mean fewer additional purchases and predictable behaviour under load, lending confidence to both repetitive and one‑off production tasks. For ready, dependable workholding with AMF precision, contact Metav Werkzeuge to confirm stock and suitability for specific setups at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833076NW Type: No. 6314V Product: Clamping iron Brand: AMF Packaging unit: 1 Dimensions & core data Clamping height: 16 - 65 mm T‑slot: 20 mm Jaw width: 22 mm Thread: M20 Overall length: 160 mm Features & accessories Includes clamping screw M20 x 20 x 160 Axite enrichment: A: 30; B2: 60; E1: 30; E2: 60; LS: 69 UID / SKU: 4000833076NW FAQ Which T‑slot size is this clamping iron intended for? The clamping iron is designed for a 20 mm T‑slot, ensuring direct compatibility with standard 20 mm machine table slots. What clamping height range does it offer? The device provides an adjustable clamping height from 16 mm to 65 mm, suitable for a broad range of workpiece profiles. Is a clamping screw included with the product? Yes, the item includes a M20 x 20 x 160 clamping screw as part of the delivery for immediate use. What are the key dimensions that affect stability? Primary stability characteristics are the 22 mm jaw width and the 160 mm overall length, which together support even load distribution. For which applications is this clamping bar best suited? The component is well suited to milling and drilling fixtures, machine vices and general workshop fixturing where secure, repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com