16mm T-Slot Bolt M16 L125mm Grade 8.8, DIN 787 - AMF
Benefit from standardised fittings and consistent load capacity thanks to DIN 787 compliance and strength class 8.8; the combination of M16 threading and a 125 mm overall length delivers reliable clamping in 16 mm T‑slots. Order the T‑slot screw directly via Metav Werkzeuge or consult our specialists for specification advice. T‑slot screw (DIN 787) – M16, 16 mm T‑slot, L 125 mm, AMF T‑slot screw (DIN 787) designed for secure clamping in 16 mm T‑slot machine tables and fixtures DIN 787 standard compliance Fits 16 mm T‑slots M16 metric thread Strength class 8.8 Precise fit and repeatable clamping for machine tooling The DIN 787 specification ensures a repeatable, industry‑standard interface between the fastener and the table T‑slot, making installation straightforward and replacement predictable. With a 16 mm T‑slot designation and an M16 threaded shank, this fastener is intended for use where exact positional control and reliable shear performance matter. Engineers benefit from predictable geometry, reducing setup time and minimising downtime during fixture changes. Durable clamping performance under load Rated strength class 8.8, the fastener provides a balance of tensile strength and ductility suitable for many clamping scenarios on production equipment. The nominal overall length of 125 mm gives sufficient thread engagement for thick fixtures or stacked workpieces while maintaining a compact profile in the slot. Dimensional details for mounting and head clearance are given as A 15.7 mm, B 85 mm, E 25 mm, K 9 mm, supporting precise design of clamping assemblies and enabling faster CAD integration. Compatibility, handling and application notes Designed for workshop and industrial use, the bolt is suitable where a standard T‑slot anchoring solution is required—typical applications include machine tables, jigs and modular fixturing systems. The metric M16 thread allows compatibility with standard nuts and clamping hardware, preserving interchangeability across suppliers. Supplied as single units, the component from AMF supports small orders for maintenance spares as well as larger batch requirements when standardisation is a priority. Specify AMF T‑slot screws with DIN 787 geometry and strength class 8.8 via Metav Werkzeuge for consistent, workshop‑ready clamping—contact Metav Werkzeuge for ordering and technical guidance from Emmerich Technical Data Article number: 4000603223NW Product type: T‑slot screw (DIN 787) Manufacturer: AMF Facts T‑slot width: 16 mm Thread: M16 Overall length: 125 mm Packaging unit: 1 Special features Strength class: 8.8 Standard: DIN 787 Axite dimensions: A 15.7 mm; B 85 mm; E 25 mm; K 9 mm Brand: AMF FAQ What T‑slot size does this fastener fit? This fastener is designed for a 16 mm T‑slot and uses an M16 thread for anchoring. Is the product suitable for machine table clamping? Yes, the T‑slot screw (DIN 787) from AMF is intended for securing fixtures and workpieces on machine tables and modular fixturing. What does strength class 8.8 indicate for this screw? Strength class 8.8 denotes a high tensile rating suitable for many clamping tasks, offering a reliable balance of strength and toughness for securing components under load. Which standard governs the geometry of this fastener? The geometry follows DIN 787, the standard for T‑slot bolts and screws, ensuring interchangeability and conformity with tooling tables designed to that norm. How is the overall length measured for this item? The overall length is 125 mm, measured from end to end; this indicates available thread and shank length for assembly. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Bolt M16 L63mm Grade 8.8 With Nut And Washer, DIN 787 - AMF
Benefit from secure, standard-compliant clamping, robust Grade 8.8 strength and an M16 thread with a 63 mm overall length for reliable fixture assembly. Order directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot bolt DIN 787 – M16 thread, 63 mm, Grade 8.8 A AMF T-slot bolt DIN 787 engineered for secure clamping in 16 mm T-slots, supplied complete with nut and washer for immediate installation DIN 787 standard compliance M16 metric thread 63 mm overall length Includes nut and washer Consistent clamping performance for production workflows The solid-design T-slot fastener delivers repeatable clamping results in modular fixture systems. With an M16 thread and 63 mm overall length, the fastener is suitable for standard workshop fixtures and machine tables that use a 16 mm T-slot. The metric thread enables straightforward torque control with common tools, translating into predictable clamp force and fewer setup iterations. Emphasis on measurable performance supports efficient production planning and reduces downtime during changeover. Engineered to fit DIN 787 T-slot systems precisely Compliance with DIN 787 ensures dimensional compatibility with established T-slot profiles, enabling straightforward integration into existing jigs and tables. The 16 mm slot specification and the supplied hardware remove ambiguity during part selection, allowing procurement and assembly teams to match components rapidly. Clear standard adherence also simplifies maintenance documentation and parts lists for long-term workshop reliability. Durable strength class for demanding clamping tasks Manufactured to Grade 8.8, this bolt offers high tensile capacity for secure fixturing under repeated load. The elevated strength class reduces the risk of fastener deformation during heavy clamping and contributes to longer service intervals for fixtures. Supplied nut and washer guarantee correct seating and load distribution, helping to protect both the bolt and the mounted workpiece while supporting consistent clamping behaviour across repetitive cycles. Practical dimensional data for correct selection and fit Detailed dimensional values aid precise selection: A: 15.7 mm, B: 45 mm, E: 25 mm, K: 9 mm. These figures support quick verification of clearance and engagement depth when designing or modifying clamping arrangements. The clearly defined metrics reduce trial-and-error during assembly and enable confident specification in procurement lists and CAD documentation, ensuring the component fits as intended the first time. For secure, standard-compliant clamping with AMF components, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833329NW Product type: T-slot bolt Standard: DIN 787 Manufacturer: AMF SKU / UID: 4000833329NW Facts T-slot: 16 mm Thread: M16 Overall length: 63 mm A: 15.7 mm B: 45 mm E: 25 mm K: 9 mm Package unit: 1 Special features Grade 8.8 Includes nut and washer Addition: A: 15.7; B: 45; E: 25; K: 9 FAQ What T-slot size does this bolt fit? The bolt is designed for a 16 mm T-slot, compatible with standard DIN 787 profiles; see SKU 4000833329NW for full identification. Is a nut and washer included with the bolt? Yes, the AMF T-slot bolt DIN 787 is supplied complete with a nut and washer for immediate installation and correct load distribution. Which standard and thread form apply to this fastener? The fastener conforms to DIN 787 and features an M16 metric thread with an overall length of 63 mm. Is the bolt suitable for heavy-duty clamping? With a Grade 8.8 classification, the bolt provides high tensile strength appropriate for demanding clamping tasks and repeated fixture cycles; refer to SKU 4000833329NW when ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut M12 Height 18mm DIN 508, Strength Class 10 - AMF
Benefit from a standard-compliant design, high strength class 10 performance and a compact 18 mm profile for secure clamping in 16 mm T-slots; order the AMF T-slot nut directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot nut (DIN 508) – T-nut 16 mm, M12 thread The AMF T-slot nut (DIN 508) is a precision clamping element for machinery and fixture work, developed for reliable engagement in 16 mm T-slots and fitted with an M12 internal thread. DIN 508 standardised design For 16 mm T-slots M12 internal thread Height 18 mm, strength class 10 Consistent, standardised fastening for repeatable setups A solution built to industry standards, this T-slot nut ensures DIN 508 compliance, guaranteeing interchangeability with matching table profiles and fixtures. The combination of a 16 mm slot fit and an M12 internal thread reduces ambiguity during procurement and simplifies inventory management. With its declared strength class 10, the component delivers a predictable load capacity that supports engineered clamping strategies; the specification therefore aids planners and workshop managers in selecting the correct element for machines and jigs without the need for extensive testing. Faster assembly and secure engagement at the machine The compact height 18 mm profile is designed for positive engagement in the slot, improving contact surface and reducing the risk of rotation under load. As a T-slot element, it converts axial screw force into secure lateral fixation, enabling efficient clamping with minimal setup time. This practical behaviour translates into measurable productivity gains on repeat runs and fixture changes, while the standardised geometry helps maintain consistent torque transfer and stable clamping forces across assemblies. Practical procurement and engineering information for integration Engineering values such as the axite enrichment (A: 15.7; E: 25; K: 9) and the declared strength class 10 provide the necessary data points for CAD integration and strength assessments, supporting design decisions early in the work process. Delivered in single-piece packaging, the component is appropriate for sample fitting or small batch supplies. For specification clarifications or to obtain additional technical drawings, Metav Werkzeuge provides direct support via email and telephone; this local point of contact aids rapid decision-making and reliable supply planning. Request tailored technical advice or a stock check from Metav Werkzeuge for the AMF T-slot nut (SKU 4000603165NW) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603165NW Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 16mm M12 AMF Manufacturer: AMF Product type: T-slot nut Packaging unit: 1 Numbers / Core data Height: 18 mm T-slot size: 16 mm Thread: M12 Strength class: 10 Axite values: A 15.7; E 25; K 9 Designs / Special features DIN 508 compliant Works standard T-nut 16 mm M12 internal thread Single-piece packaging FAQ Is this T-slot nut compatible with all 16 mm T-slots? The AMF T-slot nut is designed to fit standard 16 mm T-slots in accordance with DIN 508 and will be compatible with tables and profiles manufactured to that standard. What does strength class 10 mean for my clamping setup? Strength class 10 indicates the material grade and tensile characteristics declared for the component; the AMF T-slot nut’s class 10 rating supports robust clamping where predictable mechanical performance is required. Can the T-slot nut be used with M12 clamping screws directly? Yes, the internal M12 thread on this slot nut accepts M12 clamping screws, enabling direct use with standard threaded fasteners for secure fixation. Are the axite enrichment values relevant for fixture design? Yes, the axite values (A: 15.7; E: 25; K: 9) provide additional geometric and load-related information useful for CAD modelling and engineering assessments when integrating the T-nut into fixtures. Is the product supplied as single units or in bulk packs? The component is supplied as a single-piece packaging unit, suitable for sample fitting or precise quantities in assembly operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut M14 DIN 508 18mm Height, Strength Class 10 - AMF
A compact combination of DIN 508 standard conformity, a 16 mm T-slot fit and a secure M14 thread ensures reliable fixture clamping and long service life. Benefit from the robust strength class 10 specification and fast supply from Metav Werkzeuge — order directly or consult our team for application advice. T-slot nut (DIN 508) — T-Nut 16 mm with M14 thread (AMF) The T-slot nut (DIN 508) is a standardised clamping element for 16 mm T-slots, providing a secure threaded anchor (M14) for fixtures, stops and tooling in milling and drilling tables. DIN 508 standard compliance For 16 mm T-slots M14 internal thread Strength class 10 Secure, standardised clamping for production tables The choice of a DIN 508-compliant T-slot component delivers predictable fit and repeatable positioning across a wide range of machine tables. By matching the common 16 mm T-slot dimension and offering an M14 internal thread, the part reduces setup times and minimises the need for custom adaptors. The standardisation translates into operational reliability: fixturing becomes straightforward, interchangeability is ensured and the risk of misfit is lowered. This practical compatibility supports efficient small-batch production and routine workshop tasks. Engineered for strength and stable fixation Manufactured to a strength class 10, this T-slot element provides high clamping resilience under load, making it suitable for demanding holding tasks. Dimensional data specified for seating and engagement (A: 15.7; E: 25; K: 9) ensures precise seating and consistent torque transmission when paired with appropriate bolts. The internal M14 thread permits use with common industrial fasteners, enabling secure joining without additional machining. The result is a robust connection that maintains alignment and resists loosening during machining cycles. Practical integration and workshop advantages The compact geometry and standard thread allow quick installation and replacement, which reduces machine downtime and simplifies inventory management. As a simple, durable component, the nut supports modular fixturing strategies and is well suited to both maintenance and production environments. For purchasers seeking dependable components, the standardised specification and measurable dimensions facilitate procurement and quality control within an industrial supply chain. For professional procurement of standardised clamping components, contact Metav Werkzeuge for fast delivery from Emmerich, technical advice and exact order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833205NW Article designation: T-slot nut (DIN 508) T-Nut 16mm M14 AMF Thread: M14 T-slot width: 16 mm Standard: DIN 508 Facts Height: 18 mm Addition A: 15.7 Addition E: 25 Addition K: 9 Strength class: 10 Packaging unit: 1 UID: 4000833205NW Special features Standardised for repeatable clamping Compatible with common M14 fasteners Robust strength specification Compact design for machine tables FAQ How does the DIN 508 standard affect compatibility with machine tables? The DIN 508 specification used for this T-slot nut ensures that the component seats and aligns consistently in 16 mm T-slots, providing predictable compatibility with standard machine tables and fixtures. Can the M14 thread be used with standard hex bolts and clamping elements? Yes, the M14 internal thread is compatible with commonly available M14 bolts and clamping hardware, allowing straightforward integration into existing fixturing systems. What do the A, E and K dimensions indicate for installation? The listed values (A: 15.7; E: 25; K: 9) describe key seating and engagement dimensions that determine how the nut locates in the slot and how much thread engagement is available for safe clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut Nr. 510 T-Slot 14mm M12 Rhombic, Strength Class 10 - AMF
Secure clamping and straightforward integration into standard fixtures thanks to the rhombic profile and an M12 fixation thread. The compact 16 mm height suits 14 mm T-slots while strength class 10 ensures reliable load capacity. Order the AMF T-slot nut directly via Metav Werkzeuge or ask our consultants for tailored advice. T-slot nut Nr. 510 — AMF T-Nut 14 mm, M12, rhombic T-slot nut Nr. 510 is a rhombic-profile T-slot nut designed for secure, repeatable fixturing in machine tables and modular fixtures. Rhombic profile for secure clamping Compatible with 14 mm T-slots M12 thread for robust fixation Strength class 10 for high load capacity Reliable clamping performance for precision fixtures The rhombic profile provides a positive seating in the slot, reducing lateral play and improving repeatability in clamping positions. Combined with the M12 internal thread and a nominal height of 16 mm, the component is dimensioned for stable engagement in 14 mm T-slots, delivering consistent clamp force under cyclic loads. The strength class 10 designation indicates enhanced tensile properties, which benefits applications where sustained clamping pressure and safety margins matter. Clear dimensional fit for quick selection and assembly Key dimensional values are specified as A: 13.7 mm, E: 22 mm and K: 8 mm, ensuring a predictable fit into profile and table grooves. These figures describe the main contact and engagement geometry and support compatibility checks with bolting hardware and slot tolerances. The rhombic head geometry and the T-slot interface allow simple assembly with standard hex bolts into the M12 thread, shortening setup time and reducing adjustment work on the shop floor. Suitable uses and workshop advantages The part is intended for use in milling tables, drilling jigs, and modular clamping systems where both positional accuracy and load resistance are required. Its compact form factor helps keep assemblies close to the workpiece while the M12 fixation ensures connection integrity during machining operations. Specified packaging unit facilitates inventory planning for workshops and distributors, and the combination of proven geometry and elevated material strength supports long service intervals and predictable maintenance cycles. For ordering or selection support for the AMF T-slot nut Nr. 510, contact Metav Werkzeuge for expert advice and prompt dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833217NW SKU: 4000833217NW Brand: AMF Type: Nr. 510 Product: T-slot nut Facts Height: 16 mm T-slot size: 14 mm Thread: M12 Dimensional values: A: 13.7 mm, E: 22 mm, K: 8 mm Strength class: 10 Packaging unit: 1 Special features Rhombic head profile Designed for machine table and fixture use Robust M12 fixation Compact, low-profile form FAQ Which T-slot width is this nut compatible with? The AMF T-slot nut Nr. 510 is designed for 14 mm T-slots and engages reliably with the specified head geometry. What thread does the component accept? The internal thread is M12, allowing use with standard M12 bolts for secure fastening. What does strength class 10 mean for load handling? Strength class 10 indicates higher tensile properties compared with lower classes, so the AMF T-slot nut Nr. 510 offers improved resistance to shear and tensile loads in demanding clamping situations. Are the dimensional values A, E and K relevant for fixture design? Yes; A: 13.7 mm, E: 22 mm and K: 8 mm define the main engagement geometry and help ensure correct clearance and contact in assemblies. Is this product suitable for repeated repositioning in jigs? The rhombic profile and robust thread make the part well suited to repetitive clamping and repositioning in modular workshop fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175mm Clamping Wedge for T‑Slot 20mm Height 0-85mm M20x20x200 - AMF
Reliable clamping for 20 mm T‑slots and an adjustable clamping height of 0–85 mm deliver secure workholding; the supplied M20 x 20 x 200 clamping screw simplifies setup and reduces changeover time. Order the component directly via Metav Werkzeuge or consult our advisers for specification support. Clamping bar Nr. 6321 — for 20 mm T‑slot, clamping height 0–85 mm (AMF) The Clamping bar Nr. 6321 is a robust clamp bar designed to secure fixtures and workpieces in 20 mm T‑slots, providing an adjustable clamping height from 0 to 85 mm for flexible machining setups. For 20 mm T‑slot Clamping height 0–85 mm Includes M20 x 20 x 200 clamping screw Length 175 mm, width 21 mm Faster, more reliable workholding for machining operations The combination of an adjustable clamping height 0–85 mm and compatibility with a 20 mm T‑slot translates directly into reduced setup times and steadier machining. The bar’s geometry and the supplied M20 x 20 x 200 clamping screw allow a single, repeatable clamping procedure that secures components evenly across the contact surface. For production environments where cycle time and repeatability matter, this design supports consistent results and fewer re-clamps during batch runs. Simple integration and versatile application across fixtures Designed for straightforward installation into standard machine tables and fixture plates, the bar fits the common 20 mm T‑slot and matches existing clamping arrays. The compact footprint—175 mm overall length and 21 mm width—permits close packing of multiple bars for complex fixturing, while the adjustable range gives flexibility for variable workpiece heights. This reduces the need for special adapting parts and streamlines tool planning in general workshop and industrial contexts. Durable build for dependable industrial performance Manufactured for repetitive use, the component supports stable clamping without excessive maintenance. The measured design minimises flex under load, helping to preserve machining accuracy over time. Where precision and safety are required, the robust construction contributes to fewer stoppages and consistent part quality, aligning with common shop-floor expectations for long-term reliability. For purchasing guidance on the AMF clamping solution and fast fulfilment from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000833069NW Type: Nr. 6321 Product type: Clamping bar Manufacturer: AMF Packaging unit: 1 Dimensions / Core specifications Width: 21 mm Overall length: 175 mm Clamping height: 0–85 mm T‑slot compatibility: 20 mm Features / Accessories Included clamping screw: M20 x 20 x 200; B2: 60 Suitable for standard machine tables and fixture plates Compact design for dense fixturing FAQ What T‑slot size does this clamping bar fit? The clamping bar fits a 20 mm T‑slot; compatibility is specified for standard 20 mm table slots. What is the adjustable clamping height range? The clamping height ranges from 0 to 85 mm, enabling a wide variety of workpiece thicknesses to be secured. Is the clamping screw included with the unit? Yes, the delivery includes an M20 x 20 x 200 clamping screw as stated in the product details for the AMF clamping bar (SKU 4000833069NW). Can multiple bars be used together on a table? The compact 21 mm width and 175 mm length allow several bars to be mounted closely for multi-point fixturing and complex workholding arrangements. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
179mm Precision Steel Clamping Jaw 12/14/16/18 Nut Slots, H Max 99 - AMF
Benefit from the robust steel construction and multi-size compatibility (12/14/16/18 mm) for repeatable, secure clamping; order the AMF No. 6497 via Metav Werkzeuge or consult our specialists for application advice. Stable clamping jaw No. 6497 — Steel clamping jaw with multi-size compatibility The Stable clamping jaw No. 6497 is a steel clamping insert designed for precision workholding in workshop and production environments, compatible with common insert sizes and engineered for repeatable fixture setups. Durable steel construction Compatible with 12/14/16/18 mm inserts Total length 179 mm for secure grip h1 38 mm, H max 99 mm specification Precise, repeatable clamping for production workflows Engineered to support accurate and consistent part holding, this steel clamping jaw delivers measurable improvements in setup repeatability. With a total length of 179 mm and clear dimensional limits such as h1: 38 mm and H max.: 99 mm, the component reduces variability in clamping height and contact area. The multiple insert compatibility (12/14/16/18 mm) allows a single jaw to be adapted across a range of workpieces and fixtures, shortening changeover time and simplifying inventory. This focus on dimensional clarity and precision supports tighter process control and fewer rejects in batch production. Robust design that lowers maintenance and downtime Made from durable steel and produced to industrial standards, the jaw is built to withstand frequent use in demanding environments. The solid construction improves wear resistance and maintains gripping contours over longer service intervals, contributing to higher machine availability. By choosing a component with defined maximum dimensions (H max.: 99 mm) and a standardised engagement height (h1: 38 mm), teams can forecast service windows and stocking needs more accurately, improving overall equipment efficiency and reducing unexpected stoppages. Easy integration into existing clamping systems and workshops Compatibility with standard insert sizes makes this clamping jaw straightforward to integrate into established clamping plates and vises, avoiding bespoke modifications. The clear dimensional data and standardised sizes facilitate procurement and spare-part planning: one part covers multiple use cases. Combined with the brand reliability associated with AMF, this solution supports streamlined logistics and a consistent quality baseline across job orders. For operations seeking a pragmatic balance between adaptability and structural integrity, the component is a practical choice. For secure, precision clamping from AMF, contact Metav Werkzeuge in Emmerich for tailored procurement and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833184NW Type: Nr. 6497 Description: Stable steel clamping jaw No. 6497, 12/14/16/18 mm, AMF Product type: Steel clamping jaw Manufacturer: AMF Packaging unit: 1 Facts Total length: 179 mm Width: 19 mm Insert compatibility: 12 mm / 14 mm / 16 mm / 18 mm h1: 38 mm H max.: 99 mm Special features Material: steel Addition: Nut: /14/16/18 Designed for repeatable clamping and secure grip Suitable for standard clamping systems and fixtures FAQ What materials is the clamping jaw suitable for? The AMF Stable clamping jaw No. 6497 is a steel clamping jaw intended for holding a wide range of workpiece materials when used with appropriate inserts; material-specific suitability depends on the chosen insert and clamping setup. Which insert sizes fit this jaw? This jaw accepts 12/14/16/18 mm inserts, as specified for the No. 6497, enabling flexible use across multiple part geometries. What are the key dimensions to consider when fitting the jaw? Key dimensions: total length 179 mm, width 19 mm, engagement height h1: 38 mm and maximum height H max.: 99 mm; these determine compatibility with plates and vises. Is this item available as a single unit and what is the SKU? Yes, the product is supplied per packaging unit 1. SKU / Article number: 4000833184NW. How does this jaw improve workshop efficiency? By combining standardised insert compatibility with robust steel construction and defined clamping dimensions, the jaw reduces changeover time and improves setup repeatability, supporting smoother production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm Ball Washer DIN 6319C For M16 Screws, Bore 17mm - AMF
Take advantage of the combination of DIN 6319C conformity, precise Ø 17 mm bore and compact seating geometry to secure reliable joint alignment and even load distribution. Order the item directly via Metav Werkzeuge or consult our advisors for specification support. Spherical washer DIN 6319C for M16 — Bore Ø 17 mm (AMF) Spherical washer DIN 6319C engineered for compensation of angular misalignment in M16 screw connections across clamped assemblies DIN 6319C standard conformity Compatibility with M16 fasteners Bore Ø 17 mm for accurate seating Compact design for misalignment compensation Reliable alignment and even load distribution A spherical washer manufactured to DIN 6319C provides a controlled spherical contact surface that compensates angular misalignment between a bolt head or nut and the mating surface. By creating a defined seating geometry, the component improves load distribution across the clamped joint, which reduces localised stress peaks and helps maintain clamp force under variable conditions. Compatibility with M16 fasteners and the precise Ø 17 mm bore ensure the washer locates reliably on the bolt shank, simplifying assembly and improving joint durability. Precise dimensions that aid installation and repeatability Key dimensions (D1 Ø17, D3 Ø30, H2 5.3, R 22) define the seating profile and overall envelope, enabling predictable behaviour in standardised assemblies. The defined outer diameter and height guarantee a repeatable contact angle, which is essential when multiple connections must perform consistently. With these measured values, the component supports efficient process planning, easier quality control and interchangeability within existing designs, eliminating guesswork during assembly or maintenance. Suitable applications and practical benefits in everyday use Designed for use wherever angular misalignment may compromise joint performance, the washer is suitable for structural connections, machine frames and fixturing systems utilising M16 screws. The part reduces the need for rework by accommodating slight surface irregularities and aligning fastener loads. Conformity to the DIN standard facilitates procurement and replacement planning, while the compact spherical seating minimises additional space requirements in confined assemblies. For swift supply and technical advice on compatibility, request the AMF spherical washer via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 4000833460NW Standard: DIN 6319C Description: Spherical washer for M16, bore Ø 17 mm Manufacturer: AMF Facts Bore diameter D1: 17 mm Outer diameter D3: 30 mm Height H2: 5.3 mm Radius R: 22 mm Suitable for: M16 Packaging unit: 1 UID: 4000833460NW Special features Conforms to DIN 6319C Compensates angular misalignment in bolted joints Defined spherical seating for uniform load distribution FAQ What is the primary function of this spherical washer? The spherical washer is intended to compensate for angular misalignment and to provide a uniform seating surface for M16 fasteners, improving load distribution in clamped joints. Is this part compatible with standard M16 bolts and nuts? Yes, the washer is specified for M16 applications and features a bore of Ø 17 mm to fit the bolt shank as per the designation. Which dimensions define the washer's seating geometry? Key seating geometry is given by D1 Ø17 mm (bore), D3 Ø30 mm (outer diameter), H2 5.3 mm (height) and radius R 22 mm, which together determine the contact angle and fit. Does the component meet any recognised standard? The part is manufactured to DIN 6319C, ensuring standardised form and interchangeability for assemblies that reference this specification. Can this washer be used to correct significant misalignment in joints? The washer compensates for moderate angular misalignment typical in bolted assemblies; for large misalignments, a detailed joint assessment and specialist solutions may be required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm Washer DIN 6340 For M16 Bolts, 45mm Outside Diameter, 6mm Thickness - AMF
Take advantage of standardised DIN 6340 conformity, robust dimensional stability and a compact 6 mm thickness for dependable load distribution in bolted assemblies. Order the U washer directly via Metav Werkzeuge or consult our specialists for specification support. U washer DIN 6340 — Washer for M16 screws, 17 mm bore (AMF) A U washer DIN 6340 engineered for M16 screws with a 17 mm central bore, designed to ensure reliable load distribution and consistent fit in industrial fastening applications DIN 6340 standardised U washer For M16 screws, 17 mm bore 45 mm outer diameter, 6 mm thickness Improved bearing and reduced stress on threaded connections The DIN 6340 specification ensures a consistent geometry that benefits load-bearing joints. With an inner bore of 17 mm and a thickness of 6 mm, the component increases the contact area around the fastener head or nut, which reduces localised pressure and the risk of material deformation. In practical terms, this means longer service life for the joint and fewer re-tightening cycles. The combination of prescribed dimensions and standard compliance facilitates predictable performance in repetitive assembly processes, improving process reliability across production runs. Predictable fit for easier assembly and inventory control A defined outer diameter of 45 mm and precise bore tolerances allow for interchangeability in maintenance and production settings. By keeping dimensions standardised, the washer simplifies part selection during machine servicing and reduces downtime caused by mismatched components. The clear dimensional data supports procurement and storage planning: replacement parts are easily identified by their standard, diameter and thickness, so workshop and inventory management benefit from reduced complexity and faster turnarounds. Versatile use across industrial fastening tasks This U-shaped washer is suitable for a broad range of bolted assemblies where bearing surface and stabilisation are required. The washer’s geometry helps align the fastener, preventing pull-through in softer substrates and supporting clamping forces in steel or structural connections. For technicians and engineers, the part offers a straightforward solution when a standardised bearing washer is needed for M16 fasteners. The U washer DIN 6340 is thus a practical component for repair, retrofit and new-build applications where conformity and repeatable behaviour are priorities. Selection advice and compatibility considerations When specifying a washer, match the bore to the fastener’s shank; the 17 mm bore provides clearance for M16 threads while maintaining guidance for the bolt. The 6 mm thickness contributes stiffness under compressive load and assists in maintaining clamp force distribution. Note that material and surface treatment are not specified here; selection should consider corrosion resistance and electrical isolation requirements where applicable. For exact compatibility with a specific assembly, confirm material pairing and any coating needs before final selection. For supply and technical assistance regarding DIN 6340 U washers, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for reliable delivery and specification advice Technical data Article number: 4000833440NW Standard: DIN 6340 Type: Washer (U washer) Brand: AMF Facts Inner bore (D1): 17 mm Outer diameter (D2): 45 mm Thickness (S): 6 mm Special features Designed for M16 fasteners Conforms to standardised DIN geometry Suitable for industrial bolted assemblies FAQ What screw size is this washer designed for? This U washer is designed for M16 screws; the inner bore of 17 mm provides the necessary clearance for M16 threaded shanks. Does the washer conform to a recognised standard? Yes, the component conforms to DIN 6340, ensuring standardised geometry and predictable assembly behaviour for industrial applications. What are the key dimensions of the washer? The washer features a 17 mm inner bore, 45 mm outer diameter and 6 mm thickness (SKU 4000833440NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18/20mm Slot Nut For Fixed Mounting, Fits M6 x 16, H5 - AMF
Compact, reliable and made for mixed-profile setups: the combination of a fixed-mount design, compatibility with nominal groove 18 mm / 20 mm and support for M6 x 16 fasteners ensures consistent clamping and rapid assembly. Order the part directly via Metav Werkzeuge or consult the team for application advice. T-slot nut No. 6322A by AMF — nominal groove 18/20 mm, for fixed mounting A T-slot nut No. 6322A engineered for fixed mounting in machine and fixture grooves, providing a precise seating solution for profile-based assemblies. Fixed-mount design for secure assembly Fits nominal groove 18 mm (machine) / 20 mm (fixture) Compatible with M6 x 16 fasteners AMF quality with precise fit Precise seating for mixed groove systems The design delivers a repeatable, tight fit for combination applications where machine grooves and fixture slots differ. With nominal groove compatibility at 18 mm on machines and 20 mm on fixtures, the component maintains alignment under load and simplifies part selection in mixed environments. This precision reduces variability during setup and supports reliable positioning of tooling and workpieces. The low profile assists in maintaining compact assemblies without sacrificing contact stability, which is particularly valuable in constrained toolrooms and modular jig systems. Secure fixed mounting that speeds up production A fixed-mount configuration ensures stable clamping for repetitive cycles and heavier loads. The specification for M6 x 16 fasteners provides a clear, standardised interface for common assembly hardware, enabling quick installation with off-the-shelf screws. The robust seating principle reduces micro-movement and the risk of displacement during machining or inspection runs, which translates directly into fewer reworks and shorter machine downtime. Emphasis on measurable compatibility allows engineering teams to plan fixture layouts with predictable clamping performance. Practical installation and compatibility notes for workshop use Installation is straightforward when aligned with the groove nominal sizes; correct seating depth and orientation prevent twisting and ensure maximum contact area. The component is suitable for profile-based clamping systems and modular fixturing where a fixed anchorage is required rather than sliding adjustment. For procurement and layout planning, the clear designation of groove sizes and fastener compatibility supports parts lists and BOMs. When integration with existing fixtures is necessary, matching the nominal groove and fastener standard avoids unnecessary modifications and keeps assembly time to a minimum. For reliable fixture assembly with AMF components, contact Metav Werkzeuge for procurement guidance and technical clarification — info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and delivery options. Technical data Article number: 4000833237NW Type: Nr. 6322A Product: Nutenstein (T-slot nut) Manufacturer: AMF Packaging unit: 1 Core dimensions Nominal groove (machine): 18 mm Nominal groove (fixture): 20 mm Height HL: 5 mm Suitable fastener: M6 x 16 Special features Fixed mounting design Label: Nutenstein Nr.6322A Nennmaß der Nut 18/20mm z.Festmontage AMF UID: 4000833237NW FAQ What groove sizes does this T-slot nut fit? The T-slot nut No. 6322A fits nominal groove sizes of 18 mm for machine grooves and 20 mm for fixture grooves, allowing use across mixed-profile systems. Which fastener is specified for secure installation? Installation requires an M6 x 16 fastener; this specification for the AMF T-slot nut No. 6322A ensures standardised, reliable clamping. Is this component suitable for fixed, non-adjustable mounting? Yes — the product is designed for fixed mounting, providing a stable anchorage where sliding or quick repositioning is not required. Can this part be used in modular fixturing systems? The design is compatible with profile-based fixturing and modular assemblies where groove nominal sizes match 18/20 mm, making it suitable for many workshop and production setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Clamping Wedge For T-Slot 18mm Clamping Height 13-46mm With M16x125 Clamping Screw - AMF
Take advantage of a compact clamping solution that secures workpieces in an 18 mm T‑slot, offers an adjustable clamping height of 13–46 mm and includes a M16 x 18 x 125 clamping screw for immediate integration; order directly via Metav Werkzeuge or ask our consultants for technical guidance. Clamping iron No. 6314V — T‑slot clamp for 18 mm, H 13–46 mm (AMF) The Clamping iron No. 6314V is a robust T‑slot clamping element designed for secure workpiece fixation on 18 mm T‑slot tables in machining and fixture setups. T‑slot compatibility 18 mm Adjustable clamping height 13–46 mm Includes M16 x 18 x 125 clamping screw Compact 18 mm width for tight setups Precise hold for efficient setups The primary advantage of this clamping element is its ability to provide a secure, repeatable hold across different workpiece heights thanks to the 13–46 mm clamping range. Combining a narrow profile with a dedicated clamping screw means fewer fixture changes and faster setup times on milling machines and universal worktables. The T‑slot design simplifies alignment and ensures the clamping force is transferred directly to the workpiece, reducing slippage and improving process reliability. For production environments where changeover speed matters, the balanced geometry of the clamp reduces adjustment steps and contributes to a steadier workflow. Space-saving form for compact fixtures With a nominal width of 18 mm and an overall length of 125 mm, this clamp is conceived for dense fixture arrangements where space is at a premium. The slim footprint enables closer positioning of multiple clamps without compromising access for tools or coolant. The compact dimensions also help when retrofitting existing setups: the piece will fit into standard 18 mm T‑slots while leaving room for adjacent clamping elements or measuring probes. The restrained form factor supports modular clamping strategies and helps maintain clear sightlines to the machining zone during operation. Simple integration and standardised fastening Threaded for M16, the clamp accepts standard clamping screws and nuts used across workshops, and the delivery includes a M16 x 18 x 125 clamping screw to allow immediate mounting. The choice of an M16 thread provides a widely available, robust interface that balances tensile strength and ease of handling. For those new to clamping technology: the M16 designation refers to the metric thread nominal diameter, while the screw length and head geometry determine reach and clamping leverage. Using standardised components reduces tooling inventory and simplifies maintenance. Built for workshop reliability From small jobbing shops to production cells, the unit is designed to deliver consistent performance under repeated use. The combination of precise sizing for 18 mm T‑slots, a variable clamping height and an included screw reduces the chance of incompatible hardware arriving on the bench. The clamp's straightforward functionality supports efficient fixturing routines and promotes predictable machining results, which in turn shortens inspection cycles and minimises rework. For procurement, the compact specification helps planners assess compatibility quickly and with confidence. For technical advice or delivery details on this AMF T‑slot clamp, contact Metav Werkzeuge for tailored support and prompt dispatch from Emmerich. Technical Data SKU: 4000833075NW Type: No. 6314V Manufacturer: AMF Product type: Clamping iron Clamping screw included: M16 x 18 x 125 Facts T‑slot width: 18 mm Clamp width: 18 mm Clamping height: 13–46 mm Total length: 125 mm Thread: M16 Packaging unit: 1 Additional dimensions: A: 25; B2: 50; E1: 26; E2: 45; LS: 55 Special features Designed for 18 mm T‑slot systems Adjustable clamping height for varied workpieces Includes standard M16 clamping screw for immediate use Compact profile for dense fixturing Type No. 6314V by AMF FAQ Is this clamp compatible with other T‑slot sizes? The clamp is designed specifically for an 18 mm T‑slot; compatibility with other slot sizes is not supported without adapter elements. What clamping height range does the product cover? The clamping height range is 13–46 mm, allowing secure fixation of parts with varying thicknesses. Does the delivery include the clamping screw? Yes, the delivery contains a M16 x 18 x 125 clamping screw as specified for immediate mounting. Which thread standard is used and what does M16 mean? The clamp uses an M16 metric thread; M16 indicates a 16 mm nominal thread diameter common in workshop fastenings. Can multiple clamps be used close together on the same table? The 18 mm width and 125 mm length are intended to allow close placement for dense fixture arrangements while preserving access for machining tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Hex Nut DIN 6330B M12 Strength Class 10, SW18 - AMF
Benefit from a reliable combination of high clamping capability and a standardised fit: the Class 10 rating and M12 thread form a durable basis for secure mechanical joints, while the 18 mm wrench width ensures fast assembly. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Hexagon nut DIN 6330B M12 (SW 18 mm, Class 10) by AMF A Hexagon nut DIN 6330B M12 designed for robust mechanical connections in industrial and workshop environments, compliant with the DIN 6330B standard. High-strength Class 10 performance M12 thread, suitable for standard bolts 18 mm wrench width (SW 18) Overall height 18 mm for secure clamping Robust clamping for dependable assemblies The combination of a Class 10 rating and a standard M12 thread provides a clearly defined performance level that supports reliable fastening under sustained load. Where repeatability matters, the hexagonal geometry offers a proven profile for torque transfer and prevents slippage during installation. This specification reduces the risk of rework and contributes to predictable maintenance intervals, supporting streamlined production planning and fewer unplanned stops. Precise fit reduces installation time With an SW 18 wrench width and an overall height of 18 mm, the part delivers a consistent interface for common spanners and sockets. The corner measure (Eckenmaß) of 20.03 mm aligns with the DIN guideline to ensure tool compatibility and minimise rounding during tightening. Such dimensional conformity eases assembly operations and shortens cycle times on the shop floor by enabling faster, safer torque application with standard tooling. Reliable sourcing and application confidence Manufactured to DIN 6330B, this hexagon nut is intended for use where specification compliance and traceability matter. A single-piece packaging unit supports controlled inventory management for small-batch production or repair tasks. Combined with Metav’s established supply chain and quality control procedures, the component represents a pragmatic choice for workshops and OEMs seeking consistent performance and dependable replenishment from a European distribution hub. Contact Metav Werkzeuge for tailored procurement advice on AMF hexagon nuts and to confirm suitability for specific assemblies; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833394NW Type: M12 Standard: DIN 6330B Manufacturer: AMF Product type: Hexagon nut Label: Sechskantmutter DIN 6330B M12 SW 18mm Festigkeit 10 AMF Facts Overall height: 18 mm Wrench width: 18 mm Packaging unit: 1 Corner measure: 20.03 mm Strength class: 10 Special features DIN 6330B compliance Suitable for M12 threaded assemblies Hexagon geometry FAQ What standard does this hexagon nut comply with? The nut conforms to DIN 6330B, ensuring standardised dimensions and compatibility for industrial assemblies when using an M12 thread. What is the required spanner size for tightening? The specified wrench width is 18 mm (SW 18), matching common metric spanners and sockets for efficient installation. Is this product suitable for heavy-duty fastening? Yes, the component is specified as strength class 10, indicating suitability for higher-load fastening tasks where a robust fastener is required. How is the nut supplied in terms of packaging? The item is supplied as a single-piece unit; the packaging unit is 1, which suits targeted repairs or small production runs. Can the part be referenced for ordering or traceability? Use the article number 4000833394NW and the AMF designation to ensure accurate procurement and traceability within stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Hex Nut DIN 6331 M12 Corner Size 20.03, Strength Class 10 - AMF
Take advantage of a standardised connection that combines DIN 6331 conformity with strength class 10 performance to secure heavy-duty bolted joints; order via Metav Werkzeuge or consult our specialists for application advice. AMF Hexagon Nut DIN 6331 M12 — SW 18 mm, Strength Class 10 The AMF Hexagon Nut DIN 6331 M12 is a high-strength fastening component for industrial assemblies and machinery where defined geometry and consistent torque transfer are required. DIN 6331 standard compliance Strength class 10 for high tensile loads SW 18 mm spanner width for standard tools Precise geometry with 20.03 mm corner measure Engineered for dependable, high-strength joints This component follows DIN 6331, making it suitable for applications that demand reproducible fastening behaviour. With its strength class 10 rating and M12 thread, the nut is designed for high tensile loads, delivering consistent clamping force under operational stress. The standardised specification reduces uncertainty in component selection and helps maintain assembly integrity across serial production runs. Precision geometry that improves torque transmission The nut’s defined dimensions — including SW 18 mm wrench size and a total height of 18 mm — ensure accurate contact with the spanner and an even load distribution across bolt faces. The documented corner measure 20.03 mm reflects controlled manufacturing tolerances, which support reliable torque application and reduce the risk of rounding or slippage during assembly. Machined surfaces contribute to predictable seating and minimal stress concentrations. Practical benefits for procurement and assembly processes Supplied as individual units and identified by SKU 4000833409NW, this hexagon nut streamlines inventory management for maintenance and production departments. Conformity to an established standard simplifies compatibility checks with M12 bolts and fasteners already in use. Where traceability and repeatability are priorities, the documented specification aids quality control and part reconciliation in workshop and industrial environments. For assured high-strength fastening with the AMF hexagon nut, contact Metav Werkzeuge for product availability and specification support at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: 4000833409NW Brand: AMF Article type: Hexagon nut Standard: DIN 6331 Facts Thread size: M12 Wrench width: 18 mm Total height: 18 mm Corner measure: 20.03 mm Packaging unit: 1 Special features Strength class 10 Pressed and machined finish (as labelled) Designed for industrial bolted joints FAQ What does strength class 10 indicate for this nut? The strength class 10 rating for the AMF hexagon nut signifies a high tensile capability suitable for demanding bolted connections and higher preload applications. Is this nut compatible with standard M12 bolts? Yes; the nut is specified as M12 under DIN 6331, ensuring compatibility with standard M12 bolts manufactured to the same thread standard. Which spanner size is required to fit this nut? A spanner or socket of 18 mm (SW 18 mm) is required to engage the nut correctly and apply the specified torque. What is the overall height and how does it affect assembly? The nut has a total height of 18 mm, providing sufficient thread engagement for secure clamping while fitting common assembly envelopes. How is the geometry controlled to ensure repeatable performance? The documented corner measure 20.03 mm and machined finish indicate controlled production tolerances, supporting repeatable torque transfer and reduced risk of component deformation during tightening. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Hex Nut DIN 6331 M12 SW 19 Pressed and Machined Strength Class 10 - AMF
Robust fastening with standard conformity and high tensile capacity; the combination of DIN 6331 compliance and strength class 10 provides reliable performance in demanding assemblies. The precision milled faces and a defined SW 19 width ensure consistent torque behaviour. Order the hexagon nut directly via Metav Werkzeuge or ask our consultants if needed. Hexagon nut DIN 6331 M12 SW 19 mm, strength class 10 — AMF A hexagon nut DIN 6331 M12 for high-strength machine and assembly applications, precision pressed and milled to ensure a secure, repeatable clamping connection. DIN 6331 compliant fastening element M12 thread and strength class 10 Width across flats 19 mm (SW 19) Overall height 18 mm, corner size 21.1 mm Consistent load-bearing performance for critical joints The nut is manufactured to meet DIN 6331, which assures dimensional compatibility with industry-standard threaded connections. With strength class 10, the part offers a higher load capacity than lower classes, making it suitable for assemblies exposed to elevated tensile stresses. The standardised geometry simplifies component selection in production planning and maintenance schedules, reducing the risk of mismatched parts and unplanned downtime. This technical conformity supports predictable mechanical behaviour under load. Predictable torque and seating through precision geometry Precision in contact surfaces matters for reliable clamping. The nut’s precision-milled faces minimise seating irregularities and ensure the applied torque translates into consistent preload. The SW 19 spanner size and overall height 18 mm define the working envelope for tools and tightening procedures, while the corner size 21.1 mm supports secure engagement with sockets and wrenches. Clear specification of these dimensions reduces assembly variance and helps maintain joint integrity over repeated service intervals. Easy specification, ordering and integration into existing systems As a standard M12 component, the part integrates directly with common fasteners and fixtures, simplifying procurement and stock management. The clearly documented dimensions and the DIN reference enable quick cross-referencing in technical drawings and procurement lists. Single-unit packaging supports spare-part provisioning for repair shops and small-batch production runs. Where clarity is required during selection, the concise dimension set and compliance data enable rapid decision-making within engineering and purchasing workflows. For technical advice or to secure this AMF hexagon nut for critical assemblies, contact Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833410NW Manufacturer: AMF Product type: Hexagon nut Standard: DIN 6331 Thread: M12 Key dimensions Width across flats: 19 mm (SW 19) Overall height: 18 mm Corner size (Eckenmaß): 21.1 mm Special features Strength class: 10 Pressed and milled faces Packaging unit: 1 Label: Sechskantmutter DIN 6331 M12 SW 19mm gedr.u.gefräst Festigkeit 10 AMF FAQ What standard does this nut comply with? The nut is manufactured to DIN 6331, ensuring standardised dimensions and interchangeability with M12 threaded components. Is this hexagon nut suitable for high-load applications? Yes—its strength class 10 rating identifies it as appropriate for higher tensile demands compared with lower strength classes. Which spanner size is required for tightening? The specified width across flats is 19 mm (SW 19), so a 19 mm spanner or socket should be used for assembly and maintenance. What dimensions should be checked before selecting this nut for an assembly? Confirm the M12 thread compatibility, the overall height 18 mm, and the SW 19 width across flats to ensure tool fit and correct seating in the intended application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Sechskant Nut Hexagon Nut M12 Strength Class 10, DIN 6330B - AMF
Robust fastening performance with standardised DIN geometry and a high strength class 10 makes this hexagon nut ideal for demanding mechanical assemblies; its compact overall height and standard wrench size simplify installation and save space. Order supply and expert advice directly via Metav Werkzeuge or consult the Metav team for application guidance. Hexagon nut DIN 6330B M12 (SW 19 mm) – strength class 10, AMF A hexagon nut DIN 6330B M12 engineered for high-strength fastening in industrial assembly and maintenance tasks. DIN 6330B standardised geometry Strength class 10 for high loads 19 mm wrench size (SW 19) Compact overall height 18 mm High-strength joints for industrial assemblies The strength class 10 rating identifies this fastener as suitable for applications where elevated tensile and clamping forces are required. Manufactured to DIN 6330B, the geometry ensures predictable load distribution across bolted joints, reducing the risk of loosening under dynamic stress. For engineers and workshop planners, the combination of a standard M12 thread and high strength offers a dependable solution where safety margins and component lifetime are priorities. Precision geometry that eases installation With a declared wrench size SW 19 and a corner measurement of 21.1 mm, the nut matches common spanners and sockets used in production environments, enabling rapid assembly and consistent torque application. The overall height 18 mm provides a compact footprint, which benefits installations in confined assemblies or stacked components. The standardised shape aligned to DIN specifications also facilitates automated handling and feeding in assembly lines, contributing to faster cycle times and fewer misfits. Compatibility and practical application benefits Designed as a genuine hexagon nut, this component integrates with standard M12 bolts and threaded rods, offering versatility across machinery, frames, and fixture systems. The standard DIN reference supports straightforward component selection and procurement, simplifying inventory management for maintenance departments and purchasing teams. Traceability via the SKU and adherence to recognised standards support quality documentation and regulatory compliance in industrial contexts. Procurement reliability and workshop efficiency Packaged as single units with a clear SKU for stock control, the item supports controlled replacement and allows workshops to order the exact quantity required. The standard designation and brand marking assist in quality checks and batch verification during incoming-inspection. For supply chain managers, the combination of compliant geometry and high strength reduces the need for frequent re-evaluation of fastening elements, promoting consistent assembly quality across production batches. For dependable supply and technical guidance on this AMF hexagon nut, contact Metav Werkzeuge for tailored procurement and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833395NW SKU: 4000833395NW Brand: AMF Type: M12 Standard: DIN 6330B Facts Thread size: M12 Overall height: 18 mm Wrench size (SW): 19 mm Corner measurement: 21.1 mm Strength class: 10 Packing unit: 1 Special features Hexagon nut Standardised DIN 6330B geometry High-strength classification Compact design for tight assemblies FAQ What does strength class 10 mean for the fastener? Strength class 10 indicates a high mechanical strength level for the nut and compatible bolts, suitable for applications with elevated tensile and clamping requirements; the AMF hexagon nut conforms to this class for robust joints. Is this nut compatible with standard M12 bolts? Yes, the nut is specified as M12 and is intended for use with matching M12 bolts and threaded components, following the DIN 6330B geometry to ensure fit and load distribution. Which wrench or socket fits this nut? The nut uses a standard SW 19 (19 mm) wrench size, corresponding to a corner measurement of 21.1 mm, enabling use of common hand tools and sockets. Where is this nut typically used in industry? Applications include machinery assembly, structural frames, fixtures and maintenance operations where a high-strength M12 fastening is required and DIN-standard components are preferred. How is the product identified for ordering and stock control? The item is listed under SKU 4000833395NW and labelled with the DIN reference and strength class to facilitate procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Nutenstein mit M14 Gewinde DIN 508, für T-Nut 18mm, Festigkeitsklasse 10 - AMF
T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF – T-Nutenstein für Spanntechnik T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF sorgt für sichere und normkonforme Befestigung von Spannmitteln und Vorrichtungen in T-Nuten mit 18 mm Breite. Hohe Festigkeit Klasse 10 Passend für T-Nut 18 mm M14 Gewinde für sichere Befestigung Entspricht DIN 508 Werksnorm Robuste Verbindung für Maschinen und Vorrichtungen Der T-Nutenstein wurde entwickelt, um Bauteile und Spannmittel in T-Nuten wirtschaftlich und zuverlässig zu befestigen. Durch die DIN 508-Konformität ist eine Austauschbarkeit mit etablierten Maschinentischen und Aufspannsystemen gewährleistet, was Rüstzeiten reduziert und die Planbarkeit in der Fertigung erhöht. Die Anwendung eignet sich besonders für Werkstatt, Maschinenbau und Vorrichtungsbau, wenn es auf stabile, standardisierte Befestigungen ankommt. Belastbarkeit und Effizienz im Betrieb Dank Festigkeitsklasse 10 bietet der Nutenstein hohe Tragfähigkeit und beständige Kraftübertragung beim Spannen. Das M14-Gewinde erlaubt die Verwendung handelsüblicher Schrauben und reduziert die Teilevielfalt in der Werkstatt. Folge: kürzere Montagezeiten und geringere Stillstandsrisiken bei Indexwechseln oder Nachrüstungen. Diese Eigenschaften unterstützen eine effiziente Fertigungsorganisation und verbessern die Prozesssicherheit. Passgenauigkeit und einfache Montage Mit einer Einbaubreite für T-Nut 18 mm und einer Höhe 20 mm fügt sich der Nutenstein in gängige Aufspann-Standards ein. Die kompakte Bauweise ermöglicht flexible Positionierung in Nutenleisten, während die Gewindegröße die Anpassung an unterschiedliche Spannkräfte erlaubt. Anwender profitieren von einfacher Handhabung und klarer mechanischer Funktion ohne zusätzlichen Fräsaufwand oder spezielle Werkzeuge. Zielgruppe und Anwendungsbeispiele Konzipiert für Konstrukteure, Instandhalter und Betreiber von Werkzeugmaschinen, bietet der Nutenstein eine praxisnahe Lösung für Serien- und Einzelspannplätze. Typische Einsätze sind das Befestigen von Aufspannplatten, Anschlägen oder Maschinenhilfen sowie die Nachrüstung bestehender T-Nut-Tische, wenn Normkonformität und Belastbarkeit gefragt sind. Für eine zuverlässige, normgerechte Befestigung empfehlen wir den Einsatz dieses Nutensteins von AMF; Beratung und Lieferung erfolgen über Metav Werkzeuge – per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 4000833206NW Marke: AMF Produktart: T-Nutenstein Norm: DIN 508 Fakten Höhe: 20 mm T-Nut: 18 mm Gewinde: M14 (metrisches Gewinde) Festigkeitsklasse: 10 Axite-Werte: A 17,7; E 28; K 10 Besonderheiten DIN 508 (Norm für T-Nutensteine) Werksnorm T-Nut 18mm M14 AMF Verpackungseinheit: 1 FAQ Wie montiere ich den T-Nutenstein korrekt? Die Montage erfolgt in der passenden T-Nut; der T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF wird in die Nut eingeschoben und mit einer geeigneten M14-Schraube gespannt. Achten Sie auf saubere Nuten und passende Schraubenlänge. Für welche T-Nuten ist dieser Nutenstein geeignet? Der Nutenstein ist für T-Nut 18 mm ausgelegt und entspricht der DIN 508, wodurch er in standardisierte T-Nuten von Maschinentischen und Aufspannsystemen passt. Welche Vorteile bietet die Festigkeitsklasse 10? Die Festigkeitsklasse 10 garantiert hohe Zug- und Druckfestigkeit, was sichere Spannkräfte und lange Standzeiten bei wiederholter Belastung ermöglicht. Enthält die Artikelnummer weiterführende Informationen? Die Artikelnummer 4000833206NW identifiziert den Nutenstein im Sortiment; für Bestell- und Verfügbarkeitsanfragen nutzen Sie bitte die Angabe zusammen mit Marke und Produktart. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Bolt M16 L80mm Grade 8.8 DIN 787 - AMF
Combine standard conformity and high clamping strength for reliable fixture assembly; the bolt’s DIN 787 geometry and Grade 8.8 rating ensure repeatable performance. Order the fastening element directly via Metav Werkzeuge or consult the team for application-specific advice. AMF T-slot bolt (DIN 787) – 18 mm T-slot, M16 x 80 mm, Grade 8.8 The AMF T-slot bolt (DIN 787) is a robust fastening element for slot-based clamping and fixture systems in machinery, jigs and workshop tooling. DIN 787 standardised design Suitable for 18 mm T-slots M16 threaded shank, 80 mm length High-strength Grade 8.8 steel Reliable clamping through standard conformity Conformity with DIN 787 provides assured interchangeability across slotted profiles and fixture systems, reducing adjustment time during set-up. The combination of an 18 mm T-slot profile with an M16 threaded shank and 80 mm overall length delivers a predictable engagement depth and consistent thread engagement. This standardised geometry supports quicker fixture changes and minimises the need for bespoke components, improving throughput in production and maintenance operations. The design focus is on functional reliability rather than decorative finish, ensuring secure seating and repeatable clamping in workshop and industrial environments. Engineered for strong performance and operational safety The fastener’s Grade 8.8 designation signals a high-strength specification suitable for demanding clamping tasks where elevated preload and resistance to loosening are required. The robust thread form and material grade permit confident torque application within common clamping practices, helping to maintain fixture integrity under vibration and dynamic loads. By choosing a high-strength fastener, operators gain enhanced safety margins for assemblies that experience cyclic stresses, while maintenance cycles can be planned with greater predictability. The technical advantage lies in converting the material and geometry into consistent clamping performance rather than relying on oversized components. Practical dimensions for efficient workshop integration Clear dimensional data supports inventory management and part matching: the product offers a compact overall length of 80 mm combined with slot compatibility for 18 mm profiles, simplifying selection for modular tooling systems. Additional published dimensions (A: 17.7; B: 55; E: 28; K: 10) assist in verifying clearance, head engagement and seating depth when integrating the bolt into existing fixturing. Supplied per single unit and identified by SKU 4000603228NW, the component is suited to both one-off repairs and systematic replenishment of maintenance stores, reducing downtime and streamlining parts logistics while keeping assembly workflows consistent. Contact Metav Werkzeuge for application guidance and stock details — expert advice and delivery from Emmerich is available to ensure the correct AMF T-slot bolt for each clamping task. Technical data Article number: 4000603228NW Label: T-Nutenschraube DIN 787 T-Nut 18mm M16 L.80mm Güte 8.8 AMF Manufacturer: AMF Product type: T-slot bolt SKU/UID: 4000603228NW Dimensions & thread T-slot width: 18 mm Thread: M16 Overall length: 80 mm Standard: DIN 787 Packing unit: 1 Additional dimensions: A: 17.7; B: 55; E: 28; K: 10 Special features Strength class: Grade 8.8 Suitable for slot-based clamping systems Designed for repeatable fixture assembly FAQ Is this bolt compatible with 18 mm T-slots? The AMF T-slot bolt (DIN 787) is designed for 18 mm T-slots and features an M16 thread and 80 mm overall length (SKU 4000603228NW) for direct integration into standard slotted profiles. Which standard does the fastening element conform to? Conformity to the DIN 787 standard ensures geometric compatibility and repeatable seating for the T-slot bolt across compliant clamping systems. What does Grade 8.8 indicate for this fastener? Grade 8.8 denotes a high-strength classification for the bolt, offering improved tensile and yield performance that supports elevated clamping forces and greater resistance to loosening under load. Are additional dimensions available for installation planning? Yes — the product includes auxiliary dimensions listed as A: 17.7; B: 55; E: 28; K: 10 to assist with clearance checks and head engagement during fixture design. How is the product packaged and identified? The bolt is supplied per unit (packing unit: 1) and can be ordered using SKU 4000603228NW for accurate replenishment and stock control. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Clamping Screw Set M16 38-Piece Hardened, Strength Class 8/10 - AMF
Take advantage of a robust combination of tempered M16 fasteners and compatibility with 18 mm T-slots for dependable clamping performance; the comprehensive set is supplied in a wooden case for organised storage. Order the clamping screw set directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw set No. 6520 – M16 fasteners for 18 mm T-slots (AMF) Clamping screw set No. 6520 designed for fixture and machine-table clamping in 18 mm T-slots Hardened components for high load applications M16 thread for standard clamping connections Compatible with 18 mm T-slots Complete set in wooden case with hinged lid Consistent, high-force clamping for machining and fixtures This clamping set delivers reliable clamping force thanks to components that are fully tempered, ensuring dimensional stability under repeated load. The use of M16 fasteners provides a recognised thread standard for machine tables and fixture systems, simplifying integration into existing setups. For manufacturers and workshops seeking dependable repeatability, the hardened construction reduces fastener deformation and extends service intervals, supporting uninterrupted production cycles. Engineered strength and material resilience for demanding tasks Components in the set are supplied with strength class 8 and strength class 10, offering a choice between high tensile capacity and extra-high performance where required. The tempered treatment of all parts improves fatigue resistance while maintaining machining accuracy; this combination is particularly useful when clamping steels or alloyed materials under elevated loads. Technical users benefit from clearer specification compliance and predictable mechanical behaviour across diverse clamping scenarios. Organised delivery optimises workshop workflow Delivered complete in a wooden case with hinged lid, the set keeps components organised at the point of use, reducing search time and downtime. The tidy storage solution supports a systematic workshop layout and protects the fasteners from contamination when not in use. For operations aiming to streamline setup times and maintain traceability of clamping hardware, the packaged arrangement contributes to a faster, cleaner workflow. Broad compatibility and practical applications Designed for standard 18 mm T-slots, the kit suits machine tables, drilling and milling fixtures, and modular clamping systems found in small-batch production and toolroom environments. The combination of standard M16 thread and hardened fasteners makes the set a versatile choice for securing workpieces from aluminium to alloyed steels. Where precision and repeatability are essential, the set supports efficient clamping without the need for customised fasteners. Contact Metav Werkzeuge today to discuss how the AMF clamping screw set No. 6520 can be matched to specific fixture requirements or to request a detailed specification from our Emmerich team Technical data SKU: 4000833385NW Type: No. 6520 Product: Clamping screw set Manufacturer: AMF Thread: M16 Facts T-slot compatibility: 18 mm Contents: 38 items Pack unit: 1 Special features All parts tempered Strength class 8 and strength class 10 Supplied in wooden case with hinged lid Suitable for T-slots FAQ What materials can be clamped with this set? The AMF clamping screw set No. 6520 is designed for general workshop and production use and, with its tempered fasteners and strength classes 8/10, is suitable for clamping materials ranging from aluminium to alloyed steels in standard machining operations. Is the thread standard compatible with common fixtures? Yes. The set uses M16 threads, which are a common standard for clamping fixtures and machine tables, ensuring straightforward compatibility with existing clamping hardware. Does the set include all components for immediate use? The delivery of the AMF clamping screw set No. 6520 is complete and comes organised in a wooden case with hinged lid, providing an immediately usable assortment of fasteners and accessories for workshop deployment. Are the components treated for durability? All components in the set are tempered, offering improved fatigue resistance and longer service life under repeated clamping cycles; the inclusion of strength class 8 and 10 gives options for higher tensile requirements. Can this set be used on modular clamping systems? Yes. With compatibility for 18 mm T-slots and standard M16 threads, the set is suitable for modular clamping systems, machine tables and fixture assemblies commonly found in production and toolroom environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M10 DIN 508 With Strength Class 10 - AMF
Take advantage of a DIN 508‑compliant design combined with an M10 internal thread and strength class 10 for consistent clamping performance in 18 mm T‑slot profiles; order or request advice directly via Metav Werkzeuge for seamless integration into modular fixturing. T-slot nut (DIN 508) — T‑nut, 18 mm T‑slot, M10 thread, AMF The T-slot nut (DIN 508) is a factory‑standard T‑nut designed to secure fixtures and components in 18 mm T‑slot profiles for machine tables and modular assemblies. Compliant DIN 508 standard Fits 18 mm T‑slot profiles M10 internal thread for standard bolts High load capacity, strength class 10 Reliable clamping for modular assemblies The T‑slot nut offers a straightforward solution for secure mounting in profile‑based systems. Its adherence to DIN 508 ensures dimensional compatibility and repeatable mounting results across machine tables and fixture systems. The combination of the M10 thread with compact mounting dimensions provides a robust connection that keeps clamping hardware aligned under repetitive loads, reducing setup time and improving process reliability. Thread integrity and grade‑based load safety Designed with strength class 10, the component provides enhanced tensile and shear resistance compared with lower classes. The internal M10 thread accepts commonly used bolts and allows uniform torque transmission for consistent clamping force. Reference installation dimensions are given as A: 17.7 mm, E: 28 mm and K: 10 mm, which serve as quick checks during planning and allow engineers to verify compatibility with existing fixturing systems before procurement. Practical handling and workshop benefits Engineers and fitters will appreciate the compact footprint and clear specification set that simplifies BOM entries and inventory management. The factory standard format reduces the need for custom machining of insert points and streamlines assembly procedures. When combined with a controlled parts supply from a single source, the element contributes to shorter assembly cycles and a more predictable production flow, supporting both small workshops and larger production lines. For compatibility checks or procurement assistance, contact Metav Werkzeuge with SKU 4000603167NW; consultants at Metav Werkzeuge provide detailed advice and supply direct from Emmerich for reliable delivery and technical clarification. Technical Data Article number: 4000603167NW Label: T‑Nutenstein (DIN 508) Werksnorm T‑Nut 18mm M10 AMF Brand: AMF Facts Standard: DIN 508 T‑slot size: 18 mm Height: 20 mm Thread: M10 Reference dimensions: A: 17.7 mm, E: 28 mm, K: 10 mm Strength class: 10 Packaging unit: 1 Special features Factory standard T‑nut for industrial fixturing Internal metric thread for standard bolts Compact dimensions for tight assemblies Consistent specification for repeatable setups FAQ What T‑slot width is this nut intended for? The T‑slot nut is designed for 18 mm T‑slot profiles and provides secure clamping when installed in corresponding slots. Which thread size does the component use? This T‑nut features an M10 internal thread suitable for standard M10 bolts and clamping elements. Is the component compliant with recognised standards? Yes, the product conforms to DIN 508, ensuring dimensional compatibility with standard machine tables and fixture profiles. What load class does the nut have? The part is specified as strength class 10, offering higher mechanical resistance for demanding clamping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M12 DIN 508 High Strength Class 10 - AMF
Take advantage of a standardised clamping solution that combines DIN 508 conformity, precise fit for 18 mm T-slots and a robust M12 threaded connection to secure fixtures reliably — order directly via Metav Werkzeuge or ask our consultants for compatibility advice. T-slot nut (DIN 508) AMF — 18 mm, M12 thread The T-slot nut (DIN 508) AMF is a standard clamping element designed for secure fastening in 18 mm T-slots on machine tables and jigs. Conforms to DIN 508 standard Fits 18 mm T-slots precisely M12 thread for strong clamping Strength class 10 for high load capacity Consistent compatibility with machine-table standards Built to DIN 508, this T-slot fastener ensures interchangeability across standard machine tables and modular fixtures. Conformity to the standard reduces procurement complexity and minimises setup errors when replacing or adding clamps. The standardised geometry supports predictable clamping behaviour, so maintenance cycles and tool changes proceed with less downtime and clearer spare-part management. High-strength threaded connection for secure setups The M12 threaded connection combined with strength class 10 delivers a reliable load-bearing interface for medium to heavy clamping tasks. A higher strength class indicates enhanced tensile and yield performance, which reduces deformation under tightening and maintains clamping force over repeated cycles. This results in fewer retorques and a consistent clamping result that supports machining accuracy and workplace safety. Clear dimensional data to match fixture requirements Key dimensions are provided for precise integration into assemblies: height 20 mm, with axial values A: 17.7 mm, E: 28 mm, K: 10 mm noted in the technical details. These measurements assist engineers in verifying clearance, thread engagement and washer or bolt selection. The factory-standard specification simplifies parts lists and ensures the component aligns with existing modular tooling without guesswork. For a DIN 508-compliant clamping solution from AMF and fast availability through Metav Werkzeuge, request stock details or technical clarification referencing SKU 4000603168NW Technical data Article number: 4000603168NW Product: T-slot nut Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M12 AMF Manufacturer: AMF Facts Height: 20 mm T-slot width: 18 mm Thread: M12 Standard: DIN 508 Packaging unit: 1 Axial data: A: 17.7 mm; E: 28 mm; K: 10 mm Strength class: 10 Special features Conforms to DIN 508 Factory standard for 18 mm T-slots High-strength M12 thread Intended for machine-table clamping and fixtures FAQ What T-slot size does this component suit? The T-slot nut (DIN 508) AMF is designed specifically for 18 mm T-slots, ensuring a precise fit for standard machine tables. What thread size is provided? The component features an M12 internal thread for bolt engagement and secure clamping. Is the nut compliant with an industry standard? Yes — the fastener is manufactured to DIN 508, which standardises dimensions and fit for T-slot nuts and supports interchangeability. What is the indicated strength class? The product is specified with strength class 10, indicating a high-grade threaded connection suitable for demanding clamping tasks. How is the item supplied for inventory planning? The packaging unit is listed as 1, and the article number is 4000603168NW for ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M16 Rhombic High-Strength Class 10, Height 20mm - AMF
Take advantage of a compact, high‑tensile fastening solution that combines a rhombic profile, M16 thread and compatibility with an 18 mm T‑slot for reliable fixture clamping. Order the AMF T‑slot nut directly via Metav Werkzeuge or consult the advisers for application-specific guidance. T‑Nut No. 510 — Rhombic T‑slot Nut for 18 mm T‑slots, M16 Thread (AMF) The T‑Nut No. 510 is a rhombic T‑slot nut designed for secure clamping in 18 mm T‑slots, suitable for fixtures, jigs and modular machining setups. Rhombic profile for positive locking Fits 18 mm T‑slot systems M16 thread for high clamping force Strength class 10 high tensile design Robust clamping that keeps fixtures secure and repeatable The rhombic profile provides a positive locking geometry that reduces rotation and slippage under load, which is essential for repeatable set‑ups in production and toolroom environments. The combination of an M16 thread and strength class 10 construction translates into higher allowable clamping torque compared with lower grades, enabling tighter fixation of workpieces and fixturing elements. This results in fewer re‑clamps, shorter machine downtime and a more consistent machining process, improving overall throughput without compromising stability. Fast installation and straightforward integration into modular systems The compact form factor and standard dimensions mean straightforward installation into common T‑slot tables and extruded profiles. The designation for an 18 mm T‑slot ensures compatibility with widely used machine tables and clamping rails, while the rhombic shape makes positioning precise and self‑centering when tightened. For planners and shop floor personnel, this reduces assembly time and simplifies fixture design: the nut acts as a secure anchor point, enabling rapid adjustments and modular reconfiguration with minimal tooling investment. Reliability and supply backed by an experienced partner Delivered in single units for exact planning, the component is produced for durability under frequent use and is intended for heavy‑duty clamping tasks. Metav Werkzeuge combines logistics and quality control to provide consistent availability and inspection as part of a broader offering of precision products; this includes a large catalogue and established trust across industrial customers. For procurement and production managers, the documented strength class 10 rating and standard 18 mm interface make specification straightforward and reduce the need for bespoke fastening solutions. For heavy‑duty fixturing with AMF T‑Nut No. 510, request supply and expert advice from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical data Article number: 4000833219NW Label: T‑Nutenstein No. 510 T‑Nut 18mm M16 rhombic AMF Type: No. 510 Product type: T‑slot nut Manufacturer: AMF UID: 4000833219NW Packaging unit: 1 Core dimensions T‑slot width: 18 mm Height: 20 mm Thread: M16 Strength class: 10 Addition A: 17.7 Addition E: 28 Addition K: 10 Special features Rhombic profile High‑tensile design AMF brand FAQ Which slot systems is this nut compatible with? The T‑slot nut is designed for 18 mm T‑slot systems; the rhombic profile ensures positive locking in compatible machine tables and extruded rails. What thread size does the nut use and what does that allow? The nut features an M16 thread, which permits higher clamping forces suitable for robust fixture assemblies and is standard for many heavy‑duty clamping applications. How does the strength class affect performance? With strength class 10, the component offers elevated tensile properties compared with lower classes, improving resistance to shear and enabling higher tightening torques in demanding fixtures. Is the geometry suitable for repeatable fixturing? Yes — the rhombic profile provides positive engagement that reduces rotation and drift, supporting repeatable positioning in jigs and modular fixtures using this AMF T‑slot nut (SKU 4000833219NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Countersink DIN 6319D 120° For M16 Screws, 6.2mm Depth - AMF
Take advantage of a standardised seating solution that ensures secure seating for M16 fasteners, with a precise 19 mm bore and a 120° cone angle for consistent contact and predictable load transfer. Order the AMF countersunk washer directly via Metav Werkzeuge or consult the Metav technical team for application-specific advice. AMF Countersunk Washer DIN 6319D – precision cone seat for M16, 19 mm bore, 120° angle The AMF countersunk washer DIN 6319D is a standardised seating washer designed to provide a reliable cone seat for M16 screws in industrial and workshop fastening applications. DIN 6319D standardised geometry For M16 screws with 19 mm bore 120° cone angle for even seating Dimensions: D2 19 / D4 30 / H3 6.2 Consistent, standard-compliant seating for repeatable assemblies Conformity to DIN 6319D means a predictable seating geometry that reduces variations in assembly behaviour. The combination of a 19 mm bore and a 120° cone angle ensures the clamping surface meets the screw head accurately, which lowers the risk of uneven contact and localised stress. For production environments where repeatability is essential, this standardised geometry supports consistent torque behaviour and helps maintain component integrity over repeated cycles. Efficient load distribution that protects joint integrity Designed for use with M16 fasteners, the seating profile converts bearing loads into a broader contact area, promoting even load distribution and improving joint stability. The supplied dimensional data (D2: 19; D4: 30; H3: 6.2) indicates the washer’s seat and outer diameter proportions, which helps in selecting mating components and verifying fit in assemblies. Clear dimensional references make verification straightforward during incoming inspection and CAD validation. Simplified specification and reliable procurement for workshops The standardised specification reduces enquiry complexity when sourcing fasteners and seating elements for machinery or structural work. Specifying a DIN-compliant seating washer removes ambiguity in procurement documents and enables easy replacement throughout maintenance cycles. The compact design and single-piece form factor support rapid assembly while maintaining the precision expected in professional workshop and industrial contexts. Application-focused advantages for production and maintenance This seating washer is suitable wherever controlled seating of countersunk or conical-headed screws is required, particularly in structural joins and machinery mounts that rely on stable clamping forces. By using a component with defined geometry and documented dimensions, inspection protocols become more efficient and service life predictions more reliable, thereby supporting planned maintenance and quality assurance processes. For application guidance, availability of the AMF countersunk washer (DIN 6319D, SKU 4000833470NW) or bespoke quantity advice, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and supply information. Technical data Article number: 4000833470NW Standard: DIN 6319D Brand: AMF Product type: Countersunk washer Suitable for: M16 Packaging unit: 1 Facts Bore diameter (D2): 19 mm Outer diameter (D4): 30 mm Height (H3): 6.2 mm Cone angle: 120° Suitable screw size: M16 Special features DIN 6319D compliant geometry Defined seat for conical screw heads AMF brand component Compact single-piece design FAQ What is the primary purpose of this countersunk washer? The countersunk washer provides a standardised cone seat for conical or countersunk screw heads; the AMF washer to DIN 6319D (SKU 4000833470NW) ensures consistent contact and predictable load transfer in assemblies. Which screw size is this seating washer compatible with? This seating washer is specified for M16 screws; the washer’s 19 mm bore matches the shank clearance while the 120° cone angle aligns with standard conical head profiles. How do the dimensional values D2, D4 and H3 relate to installation? D2 (19 mm) denotes the bore for the screw shank, D4 (30 mm) is the outer seat diameter and H3 (6.2 mm) indicates the seating thickness—these values aid in selecting mating parts and verifying fit during installation of the AMF countersunk washer. Is the washer suitable for repeated assembly and disassembly? Yes, the standardised geometry of the DIN 6319D seating washer supports repeated assembly cycles with consistent seating behaviour, helping to maintain joint integrity over maintenance operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Countersunk Washer For M16 Screws 120° Countersink Angle, DIN 6319G - AMF
Reliable seating with standardised geometry and a Ø19 mm bore delivers consistent clamping and repeatable alignment; compliance with DIN 6319G and the 120° cone angle simplifies assembly planning. Order this cone seat directly via Metav Werkzeuge or contact our consultants for application-specific advice. AMF cone seat DIN 6319G — conical washer for M16, Ø19 mm The AMF cone seat DIN 6319G provides a standardised conical seating solution for M16 screw connections, designed to ensure centred load transfer and secure seating in bolted assemblies. *DIN 6319G standardised cone seat *Suitable for M16 screw connections *Bore Ø19 mm for precise centring Precision seating that reduces rework and improves joint reliability The conical seat follows the DIN 6319G geometry to deliver a predictable seating surface and repeatable clamping behaviour. By matching the screw head to a defined 120° cone, the component promotes uniform load distribution across the joint and reduces the risk of misalignment. This consistency lowers the likelihood of assembly rework and supports quality assurance processes on the shop floor, especially where repeatable torque and preload are required. Clear dimensions for straightforward selection and planning Key measures such as the Ø19 mm bore, outer diameter Ø44 mm and height 7 mm provide unambiguous data for inventory and CAD planning. These dimensions enable quick verification against mating parts and countersinks, making the conical washer simple to specify for procurement lists and parts bins. The standardised form factor shortens procurement cycles and eases spare-part management in production environments. Practical use and benefits in everyday bolted joints Designed for M16 applications, the tapered washer improves seating with countersunk or tapered head fasteners where concentric load transfer is important. The component’s standard compliance supports interchangeability and integration into existing assemblies without custom machining. For workshops and maintenance teams, this means fewer bespoke parts, faster assembly times and more reliable mechanical behaviour under cyclic loads. For DIN‑compliant seating and reliable M16 assemblies, contact Metav Werkzeuge for stock availability and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000833450NW Norm: DIN 6319G Item: Cone seat for screw M16, bore Ø19 mm, cone angle 120° Dimensions & key measures Bore diameter (D2): 19 mm Outer diameter (D4): 44 mm Height (H3): 7 mm Applications & compatibility Suitable for M16 Product type: Cone seat (conical washer) Brand: AMF FAQ What screw size is this cone seat intended for? The cone seat is intended for M16 screw connections and follows the DIN 6319G specification for conical seating. Which dimensions are essential to check before installation? Check the bore Ø19 mm, outer diameter Ø44 mm and height 7 mm to ensure compatibility with mating countersinks and head geometries. What does DIN 6319G compliance guarantee for assemblies? Compliance with DIN 6319G guarantees a standardised 120° cone geometry and consistent seating behaviour, aiding interchangeability and predictable clamping performance. Can this component be used with countersunk fasteners? Yes, the conical washer is suitable for use with tapered or countersunk head fasteners where a standard conical seating surface is required. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-133mm Clamping Jaw for T-Slot 24/28mm, M24 Thread - AMF
Take advantage of a compact, versatile clamping solution that combines broad T‑slot compatibility with a wide clamping height range and standard M24 interfacing for efficient fixture setups. Order the Clamping Jaw directly via Metav Werkzeuge or consult our specialists for precise application advice. Clamping Jaw No. 6314V – Clamping jaw for 24/28 mm T‑slots, M24 thread (AMF) The Clamping Jaw No. 6314V is a heavy‑duty clamping component designed for machining fixtures and workholding systems, compatible with both 24 mm and 28 mm T‑slots and engineered to accept standard M24 clamping hardware. Clamps T‑slots 24 mm and 28 mm Wide clamping height 20–133 mm M24 thread for standard clamping bolts Robust 200 mm overall length Secure, adaptable clamping for faster fixture setup The design delivers precise, repeatable holding across a 20–133 mm clamping height, enabling a wide range of workpiece sizes to be secured without auxiliary adapters. Compatibility with 24 mm and 28 mm T‑slots ensures direct integration into common machine tables and fixture plates, reducing setup time and tool changeover. The use of a standard M24 thread means the component mates with widely available clamping bolts, simplifying inventory and procurement decisions while supporting consistent clamping force for stable machining. Built to support reliable production cycles A compact overall length of 200 mm combined with a nominal width of 26 mm provides a sturdy contact surface that maintains alignment under load. The engineered profile promotes uniform pressure distribution across the clamped part, which helps lower vibration and minimise rework. Precision‑manufactured tolerances contribute to predictable repeatability in batch production, so operators and planners can rely on consistent part quality and reduced inspection effort during long runs. Practical procurement and integration benefits for workshops Supplied as a single unit, the component fits seamlessly into existing workholding inventories and aligns with standard industrial fastening practices through its M24‑compatible interface. The straightforward specification reduces the need for bespoke parts and supports consolidation of suppliers for fixture hardware. For customers requiring application guidance, Metav provides technical advice and clear product data to assist selection and ensure the component meets the intended machining requirements. The compact design is particularly suitable for milling fixtures and general clamping tasks in metalworking environments. Contact Metav Werkzeuge for tailored clamping recommendations and specify Clamping Jaw No. 6314V (AMF) for prompt technical guidance and delivery from Emmerich. Technical data Article number: 4000603028NW Type: Nr. 6314V Brand: AMF Product type: Clamping jaw Data T‑slot compatibility: 24 + 28 mm Clamping height: 20 - 133 mm Overall length: 200 mm Width: 26 mm Thread: M24 Pack unit: 1 UID: 4000603028NW Special features Suited for standard M24 clamping systems Compact, robust profile for stable holding Designed for direct use in T‑slot tables Simplifies fixture inventory and setup FAQ What T‑slot sizes does this clamping jaw fit? The clamping jaw fits both 24 mm and 28 mm T‑slots, enabling direct mounting on common machine tables without adapters. What is the usable clamping height range? The device provides a clamping height range of 20–133 mm, allowing secure holding of a broad range of workpiece dimensions. Which thread size is required for the clamping bolts? Clamping bolts or studs with an M24 thread are compatible with the clamping jaw and are the recommended standard for installation. Is the clamping jaw suitable for general milling fixtures? Yes, the geometry and dimensions make the clamping jaw suitable for milling fixtures and standard workholding applications where T‑slot mounting is used. How is the product delivered for procurement purposes? The item is supplied as a single unit (pack unit 1) and is identified by article number 4000603028NW for ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com