16/20mm T-Slot Nut Nr. 6322A For Fixed Mounting, M6 x 16 - AMF
Take advantage of a compact, fixed-mount solution that fits both 16 mm and 20 mm T-slots and accepts standard M6 × 16 fastenings; order directly via Metav Werkzeuge or consult the technical team for application advice. T-slot Nut No. 6322A by AMF — Nominal slot 16/20 mm, fixed mounting A T-slot nut No. 6322A engineered for secure, fixed mounting in both 16 mm and 20 mm machine and fixture slots, suitable for standard M6 × 16 fasteners. Fits 16/20 mm T-slots Fixed-mount design Compatible with M6 × 16 fastenings Low-profile form for compact assemblies Secure clamping for standard T-slots with minimal profile The T-slot nut delivers straightforward, dependable clamping where slot compatibility is critical. Designed around the nominal slot dimensions 16 mm / 20 mm, the component ensures consistent seating in both machine and fixture profiles, reducing play and misalignment during assembly. Its fixed-mount concept provides a stable bearing surface for threaded fastenings, allowing conventional M6 × 16 screws to be used without adaptation. This predictability shortens set-up times and supports repeatable results on the shop floor. Fast, reliable installation that supports production flow A compact, low-profile mounting element simplifies access in confined assemblies and streamlines insertion into the slot before final tightening. The reduced profile contributes to clearance savings and allows closer component placement, which benefits compact fixtures and modular assemblies. Because the part is tailored for standard thread and slot formats, maintenance and replacement cycles are simplified—spares management is easier when components conform to common industry sizes, improving uptime and operational efficiency. Robust choice for workshops and fixture construction Selecting a purpose-made T-slot nut for fixed mounting helps to avoid secondary modifications and on-site adjustments. The component’s clear specification for slot nominal sizes and thread compatibility supports process planning and quality control. For purchasing and procurement, this clarity enables straightforward parts lists and ensures components match machine tables or fixture rails, making it an efficient choice for engineering departments, toolrooms and production teams seeking reliable, repeatable clamping solutions. Contact Metav Werkzeuge for ordering and application support for the AMF T-slot Nut No. 6322A — technical consultation and prompt dispatch from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833236NW Type: Nr. 6322A Label: Nutenstein Nr.6322A Nennmaß der Nut 16/20mm z.Festmontage AMF Manufacturer: AMF Packaging unit: 1 Suitable for: M6 x 16 Core data Nominal slot dimensions: 16 mm / 20 mm Thread size: M6 × 16 Height (HL): 5 mm Pack unit: 1 Features Fixed mounting design T-slot nut for machine and fixture slots Compact, low-profile form Standard fastener compatibility FAQ What slot sizes is this nut intended for? The AMF T-slot Nut No. 6322A is specified for nominal slot dimensions of 16 mm and 20 mm, allowing use in both machine and fixture T-slots. Which fasteners are compatible with this T-slot nut? Compatibility is with standard M6 × 16 fastenings; the component accepts M6 threads with a 16 mm screw length as indicated. Is this item supplied individually or in sets? The product is supplied in a packaging unit of 1, so each order line corresponds to a single T-slot nut. Does the nut support fixed mounting only, or is it adjustable? The design is for fixed mounting, providing a secure, non-adjustable seating in the slot to ensure stable clamping under load. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm 20mm T-Slot Bolt M20 Grade 8.8 DIN 787 - AMF
Take advantage of a DIN‑compliant fastening solution that pairs standardised compatibility with high tensile strength and precise dimensions for reliable clamping performance; order the AMF T‑slot bolt via Metav Werkzeuge for dependable supply and expert advice. AMF T‑slot bolt (DIN 787) — T‑slot 20 mm, M20, 160 mm The AMF T‑slot bolt designed for secure clamping in machine tables and fixtures, compatible with 20 mm T‑slots and specified to DIN 787 for industrial use *Conforms to DIN 787 *High tensile grade 8.8 *Designed for 20 mm T‑slots *M20 thread, 160 mm length Secure, standardised clamping for machine tooling A robust fastening element built to DIN 787 ensures consistent fit in machine table grooves and dedicated clamping systems. The M20 thread and compatibility with a 20 mm T‑slot deliver a predictable mechanical interface that simplifies tool selection and reduces the risk of mismatch. Specified as a T‑slot bolt, the component provides a compact clamping solution that integrates with standard fixtures and workholding accessories, promoting production continuity and minimising setup time. Strength classification that supports industrial demands Specified in Grade 8.8, this fastener offers a well‑recognised balance of tensile strength and ductility appropriate for many workshop and light industrial clamping applications. The classification indicates a hardened and tempered metric bolt standard, enabling secure clamping under dynamic loads while maintaining reliable thread engagement. Choosing a fastener with a confirmed strength class reduces uncertainty in load calculations and supports safer, more predictable fixation in jigs and fixtures. Precision dimensions for fast assembly and repeatable results Exact dimensions reduce guesswork during assembly: the 160 mm overall length and the complementary dimensional set (A: 19.7 mm; B: 110 mm; E: 32 mm; K: 12 mm) allow planners to verify clearance and reach before installation. The provided dimensional data, recorded as Axite additions, helps machine operators confirm that the bolt achieves the required clamping stroke without interference. Where space and alignment are constrained, these measured values support faster decision‑making and fewer trial adjustments. Reliable supply and practical application in workshops As a branded component from AMF, this T‑slot bolt suits maintenance, retrofit and new‑build scenarios in metalworking and assembly environments. Supplied in single units, the bolt is suitable for targeted replacements or custom setups where individual items are required. Combined with Metav Werkzeuge’s role as a precision distributor, procurement is straightforward and supported by a stocked warehouse in Emmerich that acts as a quality filter for the European market, ensuring prompt availability and traceable sourcing for professional buyers. For a reliable, DIN‑compliant fastening solution from AMF and fast supply from Metav Werkzeuge, request the exact dimensions or place an enquiry with Metav Werkzeuge for tailored delivery from Emmerich. Technical data Article number / SKU: 4000603237NW Product designation: T‑slot bolt (DIN 787) Brand: AMF Standard: DIN 787 Data Thread: M20 T‑slot width: 20 mm Overall length: 160 mm Strength class: 8.8 Axite additions: A 19.7 mm, B 110 mm, E 32 mm, K 12 mm Packaging unit: 1 Special features Conforms to DIN 787 Designed for machine table T‑slots Single‑piece fastener for clamping applications Suitable for workshop and industrial fixturing FAQ What standard does this T‑slot bolt comply with? The bolt is manufactured to DIN 787, ensuring compatibility with standard T‑slot profiles and predictable mechanical interfaces. Which T‑slot width is this bolt intended for? This T‑slot bolt is intended for a 20 mm T‑slot, matching common machine table grooves used in industrial fixtures. What does Grade 8.8 indicate for this fastener? Grade 8.8 denotes the bolt’s strength classification, indicating a hardened and tempered metric fastener suitable for demanding clamping tasks where reliable tensile performance is required. Can the bolt reach deep clamping positions? With an overall length of 160 mm and the given Axite dimensions (A: 19.7 mm; B: 110 mm; E: 32 mm; K: 12 mm), the bolt is specified to provide sufficient reach for many clamping setups; verify the listed dimensions against the fixture before assembly. How is the item supplied and when is it suitable to order a single piece? The product is supplied in a packaging unit of 1, making it appropriate for individual replacements or one‑off applications in maintenance or prototype work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Iron for T‑Slot 20+22mm, DIN 6316 - AMF
Benefit from DIN 6316 conformity, compatibility with T-slot 20/22 mm and M20/M22 fasteners, and a 160 mm length that ensures stable clamping in standard machining set-ups. Order the clamping bar directly via Metav Werkzeuge or consult the advisers for application-specific guidance. AMF clamping bar DIN 6316 — for T-slot 20/22 mm, 160 mm The AMF clamping bar DIN 6316 is designed as a reliable clamping element for machine tables with T-slots of 20 and 22 mm, providing a standardised solution for secure workholding in milling and machining operations. Conforms to DIN 6316 Fits T-slot 20 and 22 mm Length 160 mm for stable clamping Compatible with M20 and M22 fasteners Predictable fit and standard compliance for efficient set-up Conformity to DIN 6316 ensures a predictable mechanical interface between the clamping element and modular fixturing systems. The stated tolerance and compatibility with T-slot 20/22 mm reduce set-up iterations and simplify inventory management for production environments. Where interchangeability and reproducible clamping force matter, adherence to this norm minimises the need for individual adjustment and helps to keep cycle times consistent across batches. Stable workholding through appropriate dimensions The 160 mm overall length delivers a blend of reach and rigidity that suits a wide range of bench and table fixtures. In practice, the extended contact length contributes to stable clamping, lowering the risk of micro-movement during cutting or finishing operations. The component is specified for use with M20 and M22 fasteners, which allows integration with common clamping bolts and stud systems; this compatibility supports secure vertical pressure transfer without requiring bespoke hardware. Practical integration, traceability and workshop readiness Supplied as a single unit, the clamping bar is intended for direct incorporation into existing clamping arrangements and modular assemblies. Traceability is supported by the product identifier 4000833061NW, which assists in procurement and maintenance records. The design focus on compatibility and standard dimensions reduces the learning curve for workshop staff and shortens the time from delivery to productive use, supporting uninterrupted production and dependable repeatability. Contact Metav Werkzeuge for tailored advice on integrating AMF clamping bars in specific fixtures — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — Metav’s specialists provide practical support from Emmerich to the workshop floor Technical data Article number: 4000833061NW Product type: Clamping bar (Spanneisen) Standard: DIN 6316 Dimensions & compatibility Length: 160 mm Width: 22 mm T-slot: 20 + 22 mm Suitable for: M20, M22 Additional details Packaging unit: 1 SKU / UID: 4000833061NW Brand: AMF Axite enrichment: Addition: A: 30; B2: 60; B3: 30; C: 24; E1: 59; E2: 55 FAQ Is this clamping bar suitable for standard T-slot tables? The AMF clamping bar DIN 6316 is intended for machine tables with T-slot 20/22 mm and therefore fits standard tables that use these slot dimensions. Which fasteners are compatible with this component? Compatibility is specified for M20 and M22 fasteners; the bar is engineered to work with commonly available clamping bolts and studs for those thread sizes. What is the length and how does it affect clamping performance? At 160 mm overall length, the clamping bar provides increased contact area and improved rigidity, which contributes to more stable workholding during machining. How can the product be identified for reorder or maintenance? Use SKU 4000833061NW and the AMF designation when reordering to ensure the correct DIN 6316 clamping bar is supplied. Is this suitable for modular fixturing systems? Yes; the DIN 6316 standard and T-slot 20/22 mm compatibility make it suitable for integration into modular clamping and fixturing arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Iron T-Slot 20/22mm DIN 6314, Suitable for M20/M22 - AMF
Take advantage of the DIN 6314 standard, dual T-slot (20 / 22 mm) compatibility and the 160 mm overall length for secure, repeatable workholding; order the clamping solution directly via Metav Werkzeuge or request tailored advice from our consultants. AMF T-slot clamping jaw DIN 6314 — for 20 / 22 mm T-slots, 160 mm length The AMF T-slot clamping jaw is a precision clamping element engineered for secure workholding in 20 and 22 mm T-slots, ideal for milling machines, fixtures and general workshop clamping tasks. DIN 6314 standardised design Fits 20 mm and 22 mm T-slots Overall length 160 mm Compatible with M20 and M22 bolts Consistent, standardised clamping for reliable setups The DIN 6314 compliance ensures consistent compatibility across machines and fixtures: the clamping geometry follows an established norm so replacement parts and additional clamping elements integrate without modification. With a 160 mm overall length and a contact width of 22 mm, the component provides a predictable clamping surface that reduces setup variability. For production environments where interchangeability and repeatable tolerances matter, this standardised approach shortens setup validation and supports stable machining cycles. Versatile compatibility that simplifies tooling decisions Designed to work in both 20 mm and 22 mm T-slots, the clamping jaw accepts common bolt sizes M20 and M22, allowing one part to serve multiple machine tables and fixture systems. This versatility decreases the number of special parts required in a tooling kit and simplifies ordering and inventory management. The clear specification of slot compatibility and bolt fitment translates directly into fewer changeovers and faster fixture assembly, supporting productivity in job shops and maintenance departments alike. Practical benefits for workshop efficiency and uptime As a single-piece clamping element, the component offers straightforward handling and minimal maintenance. The compact design supports secure contact with the workpiece while remaining easy to position in the slot; this reduces the risk of misalignment during tightening and contributes to lower rework rates. Supplied as a single unit per packaging, the item suits situations where precise, standardised clamping elements are required for both short-run jobs and serial production. The defined geometry also aids in predictable force application when used with standard clamping bolts and accessories. For dependable clamping solutions from AMF and procurement support, contact Metav Werkzeuge in Emmerich for technical guidance or to discuss fitment and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833007NW Brand: AMF Type: T-slot clamping jaw Core data Overall length: 160 mm Width: 22 mm T-slot compatibility: 20 mm, 22 mm Suitable for bolts: M20, M22 Special features Standard: DIN 6314 Packaging unit: 1 UID: 4000833007NW FAQ Is the clamping jaw suitable for both 20 mm and 22 mm T-slots? Yes. The AMF T-slot clamping jaw DIN 6314 is designed to fit both 20 mm and 22 mm T-slots, enabling use across different machine tables. Which bolt sizes are compatible with this clamping element? The clamping jaw accepts M20 and M22 bolts, providing direct compatibility with commonly used clamping hardware. Does the product conform to an industry standard? It does: the component is specified to DIN 6314, ensuring standardised dimensions and predictable interchangeability. What are the key dimensions to consider when integrating the part? The main dimensions are an overall length of 160 mm and a width of 22 mm; the part is intended for T-slot widths of 20 and 22 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Wedge for T‑Slot 16+18mm, For M16/M18 - AMF
Take advantage of standard conformity and versatile fit to streamline clamping tasks; the DIN 6316 compliance and compatibility with both 16 mm and 18 mm T-slots ensure smooth integration into existing fixtures. Order the AMF clamping iron directly via Metav Werkzeuge or consult our specialists for application advice. AMF clamping iron DIN 6316 for T-slot 16/18 mm, 160 mm The AMF clamping iron DIN 6316 for T-slot 16/18 mm, 160 mm is a standardised clamping component designed for secure fixture mounting in milling tables and machine beds with 16 mm or 18 mm T-slots. DIN 6316 compliant clamping component Fits T-slot widths 16 mm and 18 mm Overall length 160 mm for broad coverage Compatible with M16 and M18 fastening bolts Versatile fit for fewer spare parts and faster setup Compliance with DIN 6316 means this clamping iron is ready for direct replacement and interchangeability in a wide range of jigs and fixtures. The dual T-slot 16 mm / 18 mm compatibility reduces inventory complexity by covering two common slot sizes with a single component, cutting procurement and storage effort. As a result, machine setup and changeover are more efficient, leading to measurable time savings in repetitive production tasks. Secure clamping with predictable mounting behaviour An overall length of 160 mm provides a substantial contact surface for clamping, enabling reliable force distribution along the workpiece. The component is designed for use with M16 and M18 fastening hardware, ensuring mechanical compatibility with commonly used clamping bolts and studs. The combination of standard adherence and correct bolt pairing supports consistent clamping forces and repeatable positioning during machining operations. Practical workshop benefits and integration The straightforward geometry and standardised dimensions simplify assembly into existing tooling systems and reduce the need for bespoke adapters. Fewer bespoke parts translate into lower setup complexity and faster turnaround when fitting fixtures or replacing worn components. With the focus on function and fit, the clamping iron supports improved workflow and predictable machine availability across routine production or maintenance interventions. Reliable supply and technical guidance from a dedicated partner Procured via Metav Werkzeuge, customers benefit from a transparent supply chain and specialist advice rooted in a long-standing focus on precision tools and workshop equipment. Metav’s role as a central supplier helps consolidate purchasing for workshop managers seeking dependable sourcing for repeat items. For technical clarification regarding suitability for specific fixtures, bolt assemblies or machine tables, Metav’s product consultants can provide the necessary application details. Contact Metav Werkzeuge to confirm suitability and availability of the AMF clamping iron (SKU 4000833060NW) and to discuss integration into existing fixtures Technical Data Article number / SKU: 4000833060NW Manufacturer: AMF Product type: Clamping iron Label: Clamping iron DIN 6316 for T-slot 16+18 mm, length 160 mm Facts Standard: DIN 6316 T-slot widths: 16 mm, 18 mm Width: 18 mm Overall length: 160 mm Special features Suitable for bolts: M16, M18 Packaging unit: 1 UID: 4000833060NW FAQ Is this clamping iron compatible with both 16 mm and 18 mm T-slots? Yes. The AMF clamping iron is specified to fit T-slot 16 mm and T-slot 18 mm, allowing use in either slot width without modification. Which fastening sizes are intended for use with this component? The clamping iron is designed for use with M16 and M18 fastening bolts, ensuring standard mechanical compatibility with common clamping hardware. Does the part conform to an industry standard for interchangeability? Yes. The component conforms to DIN 6316, which supports predictable dimensions and interchangeability across compatible fixtures and systems. What benefits does the 160 mm length provide? A 160 mm overall length offers extended contact area for clamping, improving force distribution and reducing the likelihood of local deformation under clamping loads. Can this clamping iron be used to replace existing DIN 6316 parts directly? In most cases, the AMF clamping iron can replace other DIN 6316 parts directly when slot width and bolt compatibility match the machine’s specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Fork Jaw Clamping Wedge Slot 14mm For M12 M14 Screw - AMF
Take advantage of the fork design No. 6315GN, the 14 mm slot width and the 160 mm length for reliable fixture integration; these features ensure straightforward compatibility with common clamping screws M12 and M14 and support efficient clamping setups. Order the component directly via Metav Werkzeuge or consult the team for application-specific advice. Fork clamping bar No. 6315GN – Fork design, 14 mm slot, 160 mm length (AMF) The Fork clamping bar No. 6315GN is a fork-style clamping element intended for modular fixturing and machine-tool clamping where M12 and M14 screws are used Fork design No. 6315GN for firm hold Slot width 14 mm for standard clamping bolts Overall length 160 mm for compact fixtures Compatible with M12 and M14 clamping screws Faster, more reliable fixture set-up with a fork-style clamping element The fork-style clamp offers a clear mechanical advantage for modular fixtures: the fork design simplifies engagement with clamping screws and reduces slippage during tightening. With a slot width of 14 mm and a total length of 160 mm, this clamping bar suits compact set-ups where predictable engagement depth and lateral guidance are required. The specified compatibility with M12 and M14 clamping screws streamlines procurement and reduces assembly time, making the component a pragmatic choice for workshops and production cells that require repeatable clamping cycles and minimal adjustment effort. Compatibility and practical benefits for production and workshop applications Integrating this clamping bar into a subassembly or fixture benefits process reliability. The fork geometry aligns the clamping screw centrally in the slot, providing steady force transmission and facilitating correct torque transfer for secure workpiece retention. The clear specification for screw sizes—M12 and M14—helps planners choose suitable fastenings and torque settings without additional measuring. As a compact clamping element, it supports efficient workholding where mounting space is limited while maintaining stable clamping behaviour under standard operational conditions. Quality assurance and logistical advantages for procurement The product is offered as a single packaged unit and is listed under SKU 4000833038NW, which aids inventory control and traceability. The defined dimensional parameters (slot width, effective length and enrichment dimensions) provide a verifiable basis for design decisions and compatibility checks in CAD and BOM documentation. Selecting standardised components such as this fork clamp reduces supplier complexity and supports consistent fixture assembly across multiple machines. For buyers focused on dependable, straightforward components, the clear technical definition reduces uncertainty during procurement and accelerates commissioning. Contact Metav Werkzeuge for tailored advice on integrating the AMF fork clamping bar No. 6315GN into existing fixturing systems or for guidance on matching clamping screws and torque settings; Metav’s specialists can advise on compatibility and supply from stock at the Emmerich facility. Technical data Article number / SKU: 4000833038NW Type designation: Gabelausführung Nr. 6315GN Product type: Clamping bar (Spanneisen) Label: Gabelspanneisen Nr.6315GN Schlitz-B.14mm L.160mm f.Spannschraube M12,M14 AMF Numbers / Facts Slot width: 14 mm Overall length (L1): 160 mm Axite enrichment: A: 25; B2: 40; B3: 24; L1: 160; L2: 47; L3: 30 Packaging unit: 1 Special features / Versions Fork design No. 6315GN Compatible with clamping screws M12 and M14 Compact footprint for space-limited fixtures Manufacturer brand: AMF FAQ Which clamping screw sizes fit the fork clamping bar? The fork clamping bar is specified for use with M12 and M14 clamping screws. What is the slot width and why does it matter? The slot width is 14 mm; this dimension determines compatible bolt shank clearance and engagement for stable clamping. What is the overall length of the clamping bar? The overall length is 160 mm, suitable for compact fixture arrangements. How are the enrichment dimensions defined? Enrichment data are listed as A: 25; B2: 40; B3: 24; L1: 160; L2: 47; L3: 30 and describe the principal mounting and engagement geometry. What is the item reference for ordering and inventory? Ordering and inventory reference is SKU 4000833038NW for the AMF fork clamping bar No. 6315GN. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Fork-Type Clamp Bar Slot Width 18mm For M16 M18 Clamping Screw, DIN 6315B - AMF
The DIN‑compliant fork design and 18 mm slot width deliver reliable engagement with standard clamping screws, while the 160 mm length provides stable reach for workshop fixtures. Combine standard conformity, robust engagement and straightforward integration for dependable clamping performance. Order directly via Metav Werkzeuge or consult our technical advisors for specification support. AMF Fork-style clamping bar DIN 6315B – 18 mm slot, 160 mm length The AMF fork-style clamping bar DIN 6315B is a standardised clamping element intended for workshop and industrial fixturing, designed to accept M16 and M18 clamping screws and to integrate smoothly into modular clamping systems DIN 6315B standardised design Fork-style for precise engagement 18 mm slot width for M16/M18 screws Robust 160 mm length for firm clamping Standardised interchangeability for reliable setups The fork execution of this clamping bar follows the DIN 6315B specification, which guarantees mechanical compatibility with standard clamping screw interfaces. Standard conformity means fewer measurement checks and predictable fit when combining components from different suppliers. The DIN reference is particularly valuable in production environments where repeatability and quick reconfiguration are required, as the fork clamp mates consistently with M16 and M18 clamping screws to reduce set‑up time and minimise alignment adjustments. Practical benefits in everyday clamping tasks With an 18 mm slot and a total length of 160 mm, the component provides a balance between compactness and reach: the slot width secures engagement with typical workshop clamping screws, while the length offers clearance for fixtures and workpieces. The fork geometry supports secure axial location and fast engagement, which translates into fewer interruptions during batch changeovers. Where consistent clamping force and positional stability are required, this clamping bar improves throughput by simplifying the mechanical interface between screw and fixture. Integration, handling and selection guidance The clamping bar is supplied as a single unit and is intended for direct incorporation into existing fixture plates and tooling assemblies. Selection is driven by the required screw thread size and the desired engagement geometry; in this case, suitability for M16 and M18 screws ensures compatibility with common clamping hardware. The simple fork design also facilitates inspection and visual confirmation of correct engagement, supporting efficient quality control without complex procedures. For modular systems, the standardised form factor reduces inventory complexity and speeds up maintenance cycles. For application advice on the AMF fork‑style clamping bar or for help selecting compatible clamping screws and fixtures, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical guidance. Technical data Article number: 4000833026NW SKU: 4000833026NW Label: Gabelspanneisen DIN 6315B Schlitz-B.18mm L.160mm f.Spannschraube M16,M18 AMF Manufacturer: AMF Dimensions & capacities Slot width: 18 mm Total length: 160 mm For clamping screws: M16, M18 Features & compatibility Type: Fork design (Gabelausführung) Standard: DIN 6315B Product type: Clamping bar (Spanneisen) Packaging unit: 1 Addition values: A: 30; B2: 48; B3: 15; B4: 8 FAQ What standard does this clamping bar conform to? The AMF fork‑style clamping bar conforms to DIN 6315B, ensuring standardised mating dimensions for predictable integration into fixtures. Which clamping screws fit this fork clamp? The component is suitable for M16 and M18 clamping screws and is designed for secure engagement with those common thread sizes. What are the critical dimensions to check before installation? Key dimensions are the 18 mm slot width and the 160 mm total length; these determine engagement compatibility and reach within the clamping setup. How does the fork design affect clamping performance? The fork geometry provides positive axial location and fast mechanical engagement, improving repeatability and reducing time required for repositioning in production environments. Is the clamping bar supplied ready for immediate integration? Yes, the AMF clamping bar is delivered as a single unit (packaging unit: 1) and is intended for immediate incorporation into fixture plates and modular clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Forked Clamping Wedge Slot B14 For M12 M14 Clamping Screw DIN 6315B - AMF
Take advantage of standardised, repeatable fixturing with a fork-style clamping bar that combines DIN 6315B conformity and a precise 14 mm slot for reliable alignment; its 160 mm length and compatibility with M12 and M14 clamping screws support efficient setup and consistent production. Order via Metav Werkzeuge or consult the specialists for application advice. Fork-style clamping bar DIN 6315B — 14 mm slot, 160 mm (AMF) The Fork-style clamping bar DIN 6315B is a fork-design clamping component for standardised fixture systems, engineered for secure axial positioning and compatibility with common clamping screws. DIN 6315B compliant 14 mm slot width 160 mm overall length Compatible with M12 and M14 clamping screws Consistent, standard-compliant fixturing for repeatable production Compliance with DIN 6315B provides a clear, industry-recognised basis for interchangeability and fixture planning. By using a component that adheres to a known standard, setup variance is reduced and tool lists become predictable, which supports faster fixture changeovers and fewer alignment checks. The focus on conformity enables planners and operators to integrate the part into existing clamping systems without bespoke adapters, helping to maintain process stability and minimise downtime. Secure clamping and simple mechanical compatibility The fork design with a 14 mm slot and 160 mm length offers precise seating for fork-style fixtures and allows safe engagement with standard clamping screws M12 and M14, ensuring a robust hold under axial load. The slot width denotes the gap for the mating tongue on the clamping element; matching this dimension to fixture tongues prevents play and improves force transmission. Compatibility with two common screw sizes increases flexibility in workshop setups and reduces the need for multiple variant parts. Practical workshop benefits and handling advantages A fork-style clamping solution streamlines assembly and replacement procedures within the clamping assembly: the open fork enables quick positioning and visual alignment, which accelerates repeat setups on jigs and fixtures. The component’s straightforward geometry simplifies inspection and measurement routines, so maintenance intervals and checks can be planned efficiently. Traceability for ordering and stock control is supported by the clear SKU reference, aiding procurement and inventory management in busy production environments. Secure consistent clamping with AMF fork-style clamping bars — order via Metav Werkzeuge in Emmerich or contact the specialists at info@metav-werkzeuge.com / +49 2822 7131930 to confirm suitability for the intended fixture system Technical data Article number: 4000833024NW Product: Fork-style clamping bar (Spanneisen) Brand: AMF Facts Slot width: 14 mm Overall length: 160 mm Compatible with clamping screws: M12, M14 Packaging unit: 1 Special features Fork design for positive engagement Conforms to DIN 6315B Intended for standard clamping screw use FAQ What standard does this clamping bar conform to? The clamping bar complies with DIN 6315B, ensuring compatibility with fixture systems designed to that standard. Which clamping screw sizes are compatible? Compatibility is specified for M12 and M14 clamping screws to match common workshop hardware. What does the 14 mm slot indicate? The 14 mm slot denotes the fork gap for the mating tongue, which determines fit and axial stability in the clamping assembly. How long is the component and how does that affect use? The component has an overall length of 160 mm, offering sufficient reach for many standard fixture layouts and aiding leverage and positioning. Is the product ready for immediate integration in existing systems? Designed to the DIN 6315B standard and compatible with M12/M14 screws, the clamping bar is suitable for direct integration into compliant clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Schraubbock Atlas Nr. 6430S Gr.320 H200-320mm mit Gegenmutter, Tragfähigkeit 40; Schlüsselweite 46 - AMF
Schraubbock Nr.6430S Atlas Gr.320 – Schraubbock Schraubbock Nr.6430S Atlas Gr.320 ist ein robuster Spannbock für präzise Fixierung von Werkstücken in Werkstatt und Fertigung. Die kompakte Bauform und die einstellbare Höhe machen ihn zur zuverlässigen Lösung für unterschiedlichste Spannaufgaben. Hohe Tragfähigkeit bis 40 kg Höhenverstellung 200–320 mm Inklusive Gegenmutter für sichere Klemmung Schlüsselweite 46 mm für Standardwerkzeuge Kompakte Grundfläche Breite 22 mm Robuste Tragfähigkeit für sicheres Spannen Der Schraubbock bietet eine Tragfähigkeit von maximal 40 kg, was stabile Spannverhältnisse auch bei anspruchsvollen Arbeiten ermöglicht. Die belastbare Konstruktion reduziert Vibrationen und sorgt für konstante Positionierung des Werkstücks. Durch die zuverlässige Gegenmutter bleibt die eingestellte Spannung erhalten, was Rüstzeiten verkürzt und Ausschuss reduziert. Flexible Höhenverstellung für vielseitige Werkstücke Mit einer einstellbaren Höhe von H min. 200 mm bis H max. 320 mm lässt sich der Schraubbock schnell an verschiedene Bauteilhöhen anpassen. Die verstellbare Bauhöhe ermöglicht ergonomisches Arbeiten und erleichtert das Spannen von unterschiedlich großen Werkstücken. Die begrenzte Grundbreite von Breite 22 mm sorgt für platzsparende Montage auf der Aufspannfläche. Passgenau für den Werkstattbetrieb und die Fertigung Dieses Spannmittel richtet sich an Werkstätten, Maschinenbauer und Prototypenfertiger, die eine robuste und leicht bedienbare Spannlösung benötigen. Die Schlüsselweite 46 mm ermöglicht den Einsatz gängiger Werkzeuge, die Verpackungseinheit 1 erleichtert die Ersatzteil- und Vorratsplanung. Die kompakte Gesamtlänge von 160 mm macht den Schraubbock zur praktischen Ergänzung jeder Werkzeugbank. Einfache Integration und technische Details Der Schraubbock ist für den direkten Einsatz konzipiert und lässt sich ohne großen Montageaufwand in bestehende Vorrichtungen integrieren. Technische Parameter wie TR 30 x 6 und die Angabe B2: 90 mm unterstützen die präzise Einplanung in Aufspannsysteme. Die klare Konstruktion minimiert Wartungsaufwand und steigert die Verfügbarkeit von Arbeitsplätzen. Empfehlung: Der Schraubbock von AMF überzeugt durch seine hohe Tragfähigkeit und die flexible Höhenverstellung — für belastbare Spannlösungen direkt beim Metav Vertrieb anfragen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Technische Daten Artikelnummer: 4000833130NW Marke: AMF Typ: Nr. 6430S Atlas - 320 Produktart: Schraubbock Verpackungseinheit: 1 Daten Breite: 22 mm Gesamtlänge: 160 mm Schlüsselweite: 46 mm Tragfähigkeit max.: 40 kg TR: 30 x 6 H min.: 200 mm H max.: 320 mm B2: 90 mm UID: 4000833130NW Besonderheiten Gegenmutter (sichert Einstellung) Kompakte Bauform TR 30 x 6 (Gewindeabmessung) B2: 90 mm (Anschlagmaß) FAQ Wie hoch ist die einstellbare Höhe des Schraubbocks? Die einstellbare Höhe liegt bei H min. 200 mm und H max. 320 mm. Der Schraubbock Nr.6430S Atlas Gr.320 von AMF ermöglicht so sichere Spannpositionen für verschiedene Werkstückhöhen. Für welche Belastungen ist der Schraubbock ausgelegt? Der Schraubbock weist eine Tragfähigkeit von maximal 40 kg auf und eignet sich damit für typische Spannaufgaben in Werkstatt und Fertigung. Welche Schlüsselweite wird benötigt? Für die Bedienung des Schraubbocks wird eine Schlüsselweite von 46 mm verwendet, was den Einsatz handelsüblicher Werkzeuge ermöglicht. Ist die Gegenmutter im Lieferumfang enthalten und was bewirkt sie? Ja, die Gegenmutter ist Bestandteil des Schraubbocks und sorgt für sichere Fixierung der eingestellten Position, wodurch sich Nachstellungen reduzieren lassen. Welche Maße sind für die Einplanung relevant? Wichtige Maße sind die Gesamtlänge 160 mm, die Breite 22 mm sowie die Anschlagangabe B2: 90 mm; diese Werte helfen bei der Integration in Aufspannvorrichtungen. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt DIN 6379 Hardened Grade 8.8, M20 Thread - AMF
Take advantage of the combination of DIN 6379 standard conformity, M20 thread size and Class 8.8 heat treatment for durable, reliable fastening. The stud bolt’s robust 160 mm overall length and 27 mm spanner width ensure secure assembly and straightforward installation—order direct via Metav Werkzeuge or consult our specialists for application advice. Stiftschraube DIN6379 M20x160mm, tempered to 8.8 — AMF stud bolt A stud bolt DIN 6379 M20x160mm engineered for high-strength joining in mechanical and structural assemblies, particularly where standardised dimensions and reproducible performance are required High tensile class 8.8 Standard DIN 6379 compliance Thread size M20 for common fittings Spanner width 27 mm for secure tightening Reliable strength and repeatable performance for industrial assemblies The combination of DIN 6379 geometry and a Class 8.8 heat treatment delivers a predictable yield and tensile behaviour that supports safe connections under cyclical and static loads. Specified as a stud bolt with a metric M20 thread and 160 mm overall length, this component provides a consistent fit in standard nuts and tapped holes. The material is tempered to achieve the stated strength grade, which reduces the risk of elongation or failure in service and simplifies engineering calculations for joint design. For production environments that prioritise uptime, the standard compliance reduces inspection overhead and supports interchangeability across suppliers. Practical benefits during installation and inspection A defined spanner width of 27 mm and an overall design to DIN 6379 make handling, torqueing and visual inspection straightforward. The uniform thread profile ensures predictable torque–tension relationships, easing the selection of tightening procedures and torque settings in assembly instructions. The fastener’s geometry supports use with standard fastening tools and common nuts, enabling efficient assembly lines and clean maintenance protocols. Traceability is simplified when components adhere to established standards, which helps quality control teams document batches and perform acceptance checks with confidence. Application suitability and lifecycle considerations Designed for applications requiring medium-high strength, the stud is suitable for machinery frames, fixture assemblies and structural joints where M20 metric fasteners are standard. The Class 8.8 rating indicates good resistance to standard mechanical stresses encountered in industrial and workshop settings while remaining compatible with commonly used steels and fittings. For environments with special corrosion or temperature demands, material and coating requirements should be verified separately; this fastener’s documented standard and grade provide a clear baseline for such assessments and for specifying any additional surface treatments or specialised grades if needed. For AMF high-strength fastening solutions, choose this DIN 6379 stud bolt and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833284NW Description: Stiftschraube DIN6379 M20x160mm, tempered to 8.8 AMF Manufacturer: AMF Facts Thread: M20 Overall length: 160 mm Spanner width: 27 mm Packaging unit: 1 Special features Standard: DIN 6379 Tensile class: 8.8 (tempered) Additional info: Addition: b: 100 Product type: Stud bolt FAQ Is this stud bolt suitable for structural bolting applications? The stud bolt specified to DIN 6379 and tempered to Class 8.8 is suitable for many structural and mechanical joining tasks where medium-high strength is required; check the joint design and loading conditions to confirm suitability. What are the key dimensions to check before ordering? Verify the M20 thread size, the overall length of 160 mm, and the spanner width of 27 mm to ensure compatibility with mating nuts and clearance in the assembly. Can the fastener be used with standard metric nuts? Yes — the M20 metric thread is compatible with standard M20 nuts specified for the corresponding strength class, provided the nut grade and fit match the application requirements. How is the strength grade indicated and what does Class 8.8 mean? Class 8.8 denotes a quenched and tempered steel with a defined yield and tensile strength range; the designation indicates medium-high tensile performance suitable for many industrial applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt Heat-Treated 8.8 DIN 6379, M16 Thread - AMF
Combine DIN 6379 standard conformity with an M16 × 160 mm form factor and property class 8.8 tempering for dependable, repeatable fastening. Order the stud bolt directly via Metav Werkzeuge or consult the team for application-specific advice. AMF stud bolt DIN 6379 – M16 × 160 mm, property class 8.8 A AMF stud bolt engineered to meet DIN 6379 requirements, providing a metric M16 thread and 160 mm overall length for robust mechanical and workshop fastening tasks. DIN 6379 compliant geometry M16 metric thread for robust connections Property class 8.8 for high tensile strength Consistent geometry for secure assemblies Compliance with DIN 6379 guarantees a standardised thread and shank geometry that supports predictable clamping behaviour and interchangeability across production batches. The standardised form reduces assembly errors and simplifies inventory management, since replacement parts match original specifications. This regularity benefits quality-controlled environments where traceability and repeatability are decisive for production reliability. High tensile performance explained Tempering to property class 8.8 indicates a high-strength finishing process that increases tensile and yield values compared with lower classes. A fastener treated to this class offers improved resistance against shear and loosening under dynamic loads, making it suitable where elevated mechanical stress occurs. The term property class 8.8 summarises strength data in a way that is widely recognised in engineering specifications and procurement documents. Practical compatibility and handling in workshops The metric M16 thread combined with an overall length of 160 mm provides a versatile solution for through-bolted joints and applications requiring extended engagement. The specified 19 mm width across flats facilitates standard spanner use and speeds up assembly operations on workbenches and production lines. Supplied in single-unit packaging, the component suits both one-off repairs and controlled-fit assemblies without overstocking. Standards and supplier assurance to lower procurement risk Using standard-compliant fasteners reduces rejection rates during inspection and supports compliance with documented assembly procedures. The combination of norm conformity, clear dimensional data and defined strength class aids engineers in making rational selection decisions. For further technical clarification or compatibility checks, the Metav contact channels are available: info@metav-werkzeuge.com and +49 2822 7131930. Contact Metav Werkzeuge today to confirm suitability of the AMF stud bolt tempered to property class 8.8 for specific assembly requirements and to request procurement support. Technical data Article number: 4000833275NW Standard: DIN 6379 Brand: AMF Facts Thread: M16 Overall length: 160 mm Width across flats: 19 mm Packaging unit: 1 Special features Property class: 8.8 (tempered) Conforms to DIN 6379 Product type: stud bolt Addition: b: 100 FAQ What does DIN 6379 mean for the stud bolt? DIN 6379 defines the geometry and tolerances that the stud bolt must meet, ensuring consistent fit and interchangeability with mating components. Is this fastener suitable for high-load connections? The AMF stud bolt, tempered to property class 8.8, is designed for elevated tensile demands and is appropriate where higher strength fasteners are required. Which tools are compatible with the 19 mm width? Standard 19 mm spanners and sockets match the width across flats specified for this stud bolt, enabling efficient tightening and removal in workshop environments. How to verify the correct part for procurement? Check the Article number 4000833275NW, the DIN 6379 standard, thread size M16 and overall length 160 mm against engineering drawings or BOM lists to confirm correctness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M12 Hardened 10.9, DIN 6379 - AMF
Robust fastening for demanding assemblies: the stud bolt combines DIN 6379 compliance with an M12 thread and 160 mm overall length, tempered to property class 10.9 for high tensile strength; order directly via Metav Werkzeuge or consult our specialists for specification advice. AMF Stud Bolt DIN 6379 M12 x 160 mm, Class 10.9 The AMF stud bolt DIN 6379 M12 x 160 mm is a high-strength threaded fastener designed for secure mechanical connections in industrial and workshop assemblies. Stud bolt with DIN 6379 specification High-strength Class 10.9 heat-treated steel M12 thread for standard metric assemblies 160 mm overall length for deep fixings Secure connections for heavy-duty assemblies Manufactured to the DIN 6379 standard and tempered to Class 10.9, this stud bolt provides a reliable solution where tensile strength and fatigue resistance are essential. The heat treatment increases yield strength and reduces the risk of fastener failure in dynamic or high-load environments. Specifying a component with recognised standard compliance reduces procurement risk and simplifies quality control, as the characteristic mechanical properties are verifiable against established norms. Compatibility and installation benefits With an M12 metric thread and a 160 mm overall length, the stud is suited to common industrial applications such as flanged joints, long-through fixings and assembled components requiring a double-ended threaded solution. The metric thread ensures compatibility with standard nuts and tapped holes, while the extended length allows secure engagement through thicker assemblies. Using a threaded stud instead of a single-piece bolt can ease alignment and maintenance in repeated assembly processes. Practical advantages for workshop and production use The combination of standard specification and high property class delivers practical benefits: reduced downtime through fewer fastener failures, and predictable performance under load. The robust geometry supports stable clamping forces, and the heat treatment minimises elongation under heavy preload. Where traceability is required, this product’s conformity to a recognised DIN standard aids documentation and audit processes within manufacturing or maintenance workflows. Ordering, supply and specification support Packaging is supplied per unit and traceable via the SKU 4000833262NW. Clear labelling and a straightforward product specification simplify stock management for procurement teams. If additional technical clarification is required for material compatibility or assembly recommendations, technical consultants are available to assist with selection and integration into existing processes. Contact Metav Werkzeuge for project-specific advice and reliable supply of AMF stud bolts from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 4000833262NW Standard: DIN 6379 Thread: M12 Overall length: 160 mm Label: Stiftschraube DIN6379 M12x160mm vergütet auf 10.9 AMF Packaging unit: 1 Facts Width: 15 mm Thread size: M12 Length: 160 mm Property class: 10.9 Special features Tempered to property class 10.9 Product type: Stud bolt Brand: AMF axite enrichment: Addition: b: 100 FAQ What standard does this stud bolt comply with? The stud bolt conforms to DIN 6379, ensuring standardised mechanical properties and traceable specification for industrial use. What is the material strength of the AMF stud bolt? The AMF stud bolt is heat-treated to property class 10.9, providing elevated tensile strength and improved fatigue resistance for demanding applications. Which thread and length are provided with this fastener? This threaded stud features an M12 metric thread and an overall length of 160 mm, suitable for standard M12 assemblies and deeper fixings. How is the product delivered and identified? The item is supplied per unit and identifiable via SKU 4000833262NW; the product label matches the DIN 6379 specification and Class 10.9 designation. Is this stud bolt suitable for repetitive assembly and maintenance tasks? Yes; the stud’s standard specification and high property class make it suitable for repetitive assemblies where secure clamping and predictable performance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M14x160 Tempered 8.8, DIN 6379 - AMF
Benefit from a robust DIN 6379 design and property class 8.8 strength combined with standard M14 compatibility for dependable mechanical joints; precise dimensions and traceable stock-keeping make procurement straightforward. Order the AMF stud bolt directly via Metav Werkzeuge or ask our consultants if needed. AMF Stud Bolt DIN 6379 – M14 x 160 mm, quenched to property class 8.8 A durable AMF stud bolt DIN 6379 designed for standard industrial fastening tasks where reliable clamping force and metric compatibility are required. DIN 6379 compliant stud bolt Quenched and tempered to property class 8.8 M14 thread for metric compatibility 160 mm overall length, 17 mm wrench size Secure clamping with industrial-grade strength The stud bolt is manufactured to DIN 6379 and quenched and tempered to property class 8.8, providing a high-strength fastening solution for assemblies that demand consistent preload and fatigue resistance. This heat-treatment designation indicates elevated mechanical performance compared with lower property classes, which translates into reduced risk of joint loosening under dynamic loads. The adherence to an established DIN standard ensures interchangeability with other DIN-compliant fasteners and supports predictable behaviour in bolted connections. Straightforward integration with metric systems Equipped with an M14 thread and an overall length of 160 mm, the component fits common metric tapping and nut configurations, simplifying parts selection for maintenance and new builds. The listed width of 17 mm indicates the appropriate spanner or socket dimension for installation, enabling fast torque application with standard tooling. Clear dimensional data allows planning for correct thread engagement and clamp length, helping to avoid under- or over-torquing and ensuring a secure, long-lasting joint. Traceability, stock clarity and workshop confidence The article is supplied as a single item per packaging unit and carries an identifiable SKU for inventory control, supporting traceability in production and maintenance workflows. Procurement via Metav Werkzeuge benefits from their quality filter in Emmerich, which combines broad product range and dependable order handling for industrial customers. For technical clarifications or compatibility checks, the Metav team can provide targeted advice so that the chosen stud bolt meets operational needs and assembly standards. Contact Metav Werkzeuge for tailored advice and procurement from Emmerich — their consultants will confirm compatibility and ensure reliable supply of AMF stud bolts. Technical data Article number: 4000833268NW SKU/UID: 4000833268NW Brand: AMF Article designation: Stud bolt DIN 6379 M14 x 160 mm, quenched to property class 8.8 Facts Thread: M14 Overall length: 160 mm Width (wrench size): 17 mm Packaging unit: 1 Enrichment note: Addition: b: 100 Special features DIN 6379 standard conformity Heat-treated to property class 8.8 Metric thread for standard assemblies Single-item packaging for direct use FAQ Is this stud bolt suitable for standard metric nuts and tapped holes? The stud bolt features an M14 thread and is intended for use with standard M14 nuts and tapped holes complying with metric standards; compatibility should be verified against the mating part thread class. What does property class 8.8 mean for performance? Property class 8.8 denotes a quenched and tempered fastener with elevated tensile and yield strength characteristics; the AMF stud bolt manufactured to this class provides improved resistance to static and dynamic loads compared with lower classes. Which wrench size is recommended for installation? A 17 mm wrench or socket corresponds to the width indicated for the item and is recommended to achieve correct torque application during assembly. How is the item identified for inventory and ordering? The product is listed under article number 4000833268NW and supplied as a single unit per packaging; use this SKU when ordering or checking stock levels. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M24x160 Hardened 8.8 DIN 6379 - AMF
Take advantage of a combination of standard conformity, robust strength and metric precision for dependable heavy‑duty fastening; order the part directly via Metav Werkzeuge or enquire with their specialists for application guidance. AMF Stud bolt DIN 6379 M24 × 160 mm, heat‑treated to class 8.8 The AMF Stud bolt DIN 6379 M24 × 160 mm is a metric stud engineered for secure fastening in heavy‑duty assemblies and industrial fixtures. Stud bolt to DIN 6379 standard Metric thread M24 for interchangeability 160 mm overall length for deep engagement Heat‑treated to class 8.8 for enhanced strength Built for robust, repeatable fastening performance The fastener meets DIN 6379, granting a clear benchmark for compatibility and interchangeability across industrial components. With a M24 metric thread and 160 mm overall length, the stud is suited to applications requiring deep thread engagement and a secure clamping path. The heat treatment to class 8.8 increases yield and tensile limits, which translates into predictable load capacity and fewer rework cycles. Such specification‑led construction reduces downtime and supports efficient assembly processes on production lines. Precision thread form and assembly reliability A consistent metric thread profile ensures proper fit with standard nuts and tapped holes, simplifying procurement and reducing inventory complexity. The controlled dimensions and tolerance adherence implied by the DIN standard improve torque behaviour and minimise the risk of cross‑threading during installation. Where thread engagement length is critical, the defined 160 mm overall length facilitates correct clamp thickness calculations and predictable preload, supporting structural integrity in welded frames, gearboxes, and heavy machinery junctions. Durability, maintenance benefits and supply assurance The component’s heat‑treated condition delivers enhanced tensile strength and fatigue resistance, extending service intervals and lowering lifecycle maintenance. In environments where mechanical reliability is essential, such mechanical conditioning helps prevent loosening and fatigue failures under cyclic loading. Combined with consistent manufacturing standards, this fastener contributes to long service life and fewer unscheduled interventions, supporting cost‑efficient operation in workshops and production facilities alike. For specification support or to procure this AMF stud bolt via Metav Werkzeuge, contact Metav’s technical team for tailored advice and reliable supply from Emmerich. Technical data SKU: 4000833296NW Label: Stud bolt DIN 6379 M24x160mm heat‑treated to 8.8 AMF Standard: DIN 6379 Product type: Stud bolt Packaging unit: 1 Core specifications Thread: M24 Overall length: 160 mm Width: 35 mm Addition: b: 100 Special features Heat‑treated to class 8.8 Conforms to DIN 6379 Brand: AMF Packaging unit: 1 FAQ What standard does this stud bolt comply with? This stud bolt complies with DIN 6379, which defines dimensions and requirements for metric studs used in industrial assemblies. What are the key dimensions of the fastener? The fastener features an M24 metric thread and an overall length of 160 mm; the SKU is 4000833296NW for reference. Is the stud suitable for heavy‑duty applications? Yes, the AMF stud bolt is heat‑treated to class 8.8, providing enhanced tensile strength and suitability for heavy‑duty fastening. How does the heat treatment affect performance? Heat treatment to class 8.8 increases yield and tensile properties, improving fatigue resistance and reducing the likelihood of mechanical failure in cyclic loads. Can this stud be used with standard M24 nuts? The M24 thread conforms to metric standards, allowing interchangeability with conventional M24 nuts and tapped holes that match DIN thread specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M8 Heat-Treated 8.8, DIN 6379 - AMF
Take advantage of the combination of standard-compliant dimensions, grade 8.8 tempering and simple selection for reliable mechanical fastening — order the parts directly via Metav Werkzeuge or consult our specialists for precise specification advice. AMF stud bolt — DIN 6379, M8 x 160 mm, tempered to grade 8.8 AMF stud bolt M8 x 160 mm for secure mechanical joins and industrial assemblies, engineered to DIN 6379 dimensional standards DIN 6379 compliance Tempered to grade 8.8 Thread M8 × 160 mm Predictable strength where it matters The fastener conforms to DIN 6379, ensuring consistent dimensions and fit across metric assemblies. Tempering to grade 8.8 provides a defined tensile and yield performance profile, which translates into predictable clamping behaviour under load. This reliability reduces rework and inspection effort in production environments and supports consistent torqueing and joint integrity on the shop floor. Straightforward compatibility with metric systems A clear metric designation of M8 × 160 mm streamlines selection and stocking for maintenance and assembly operations. The M8 thread size matches standard metric nuts and threaded holes, simplifying procurement and reducing the need for bespoke components. The overall length of 160 mm offers reach for through‑bolt or stud applications, improving assembly efficiency in machines and structural fixings. Durable finish and workshop-ready supply The tempering process increases fatigue resistance and strength without requiring special mounting procedures; the result is a robust fastener suitable for repeated assembly cycles. Supplied as individual units, the component is ready for immediate use or integration into larger kits. For buyers seeking consistency across multiple workstations, this familiar industrial specification supports streamlined quality control and straightforward inventory management. Request a specification check or delivery option from Metav Werkzeuge — our Emmerich team can confirm suitability for the intended application and arrange prompt supply via phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833250NW Label: Stiftschraube DIN6379 M8x160mm vergütet auf 8.8 AMF Brand: AMF Data Thread: M8 Overall length: 160 mm Width: 11 mm Packaging unit: 1 Special features Standard: DIN 6379 Tempered to grade 8.8 Axite enrichment: Addition: b: 100 Product type: Stud bolt FAQ What does DIN 6379 indicate for this fastener? DIN 6379 specifies the dimensional and tolerance requirements for this style of stud, so the part labelled to DIN 6379 fits predictably in standard metric assemblies. What is the significance of grade 8.8 tempering? Grade 8.8 denotes a quenched and tempered steel fastener with a defined tensile and yield strength range, providing improved load capacity and fatigue performance compared with lower strength classes. Is the M8 thread compatible with common nuts and tapped holes? Yes. The M8 designation matches standard metric M8 nuts and tapped holes, allowing straightforward replacement and compatibility in metric systems. Does the 160 mm measure refer to overall length or thread length? The 160 mm figure denotes the overall length of the stud; please confirm required thread engagement for specific assemblies prior to fitting. How is the item supplied and in what unit? The product is supplied in a packaging unit of 1, as indicated on the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Bolt 18mm T-Slot M16 Grade 8.8 DIN 787 - AMF
Take advantage of a standardised fastening solution that combines conformity to DIN 787, a robust M16 thread and a 160 mm shank for reliable clamping in 18 mm T-slots — order directly via Metav Werkzeuge or consult our specialists for application advice. T-slot bolt DIN 787 — 18 mm T-slot, M16, L 160 mm (AMF) A T-slot bolt DIN 787 engineered for secure fixturing and tooling clamping in industrial 18 mm T-slots. DIN 787 standardised T-slot bolt Fits 18 mm T-slots M16 coarse thread for strong clamping Grade 8.8 high-strength specification Consistent, standardised clamping that speeds setup The bolt is manufactured to DIN 787, ensuring a predictable fit across common machine tables and clamping systems. This standard conformity reduces setup time and minimises alignment checks, delivering a measurable improvement in process repeatability. With its 18 mm T-slot compatibility and M16 thread, the component is immediately recognisable as a workshop-grade fastening element that integrates with existing fixtures and clamping kits — a practical choice for production and maintenance teams seeking fewer sourcing variables and faster changeovers. High-strength design for secure, repeatable force Specified as Grade 8.8, the fastener offers high tensile capacity compared with general-purpose screws, which translates into secure clamping under dynamic loads and machining forces. The M16 thread provides coarse engagement for robust torque transmission and reduced risk of thread stripping during repeated use. For assembly work where clamp force and repeatability matter, this fastener delivers a durable connection that supports daily workshop demands without compromising fixture integrity. Practical geometry for workshop compatibility and handling A total length of 160 mm and the detailed axial dimensions support deep engagement and clearance planning for bespoke fixturing setups. The delivered geometry data (A: 17.7 mm, B: 100 mm, E: 28 mm, K: 10 mm) allows straightforward integration into CAD layouts and fixture sheets, aiding purchasing decisions and engineering checks. Supplied under the AMF designation, the bolt suits milling tables, clamping rails and modular workholding systems where a standard, strong, and easy-to-specify fastening solution is required. Secure reliable clamping with AMF T-slot bolts — contact Metav Werkzeuge for tailored application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603231NW Label: T-Nutenschraube DIN 787 T-Nut 18mm M16 L.160mm Güte 8.8 AMF Standard: DIN 787 Manufacturer: AMF Packaging unit: 1 Core dimensions T-slot width: 18 mm Thread: M16 Total length: 160 mm A: 17.7 mm B: 100 mm E: 28 mm K: 10 mm Special features Grade 8.8 strength class Designed for workshop and industrial fixturing Suitable for milling tables and clamping rails Axial geometry provided for integration FAQ What standard does this T-slot bolt conform to? The bolt is manufactured to DIN 787, ensuring compatibility with standard 18 mm T-slot workholding systems. Which T-slot width is this bolt designed for? This fastener is specified for 18 mm T-slots and is supplied with a M16 thread and a 160 mm shank. Is this product suitable for industrial machining fixtures? Yes — the Grade 8.8 specification and M16 coarse thread make the bolt suitable for industrial fixturing and machining applications. What is the SKU or article number for ordering? Order using article number 4000603231NW (labelled as the AMF T-slot bolt, DIN 787). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Bolt 18mm T-Slot M16 With Nut And Washer, Grade 8.8 - AMF
Robust DIN 787 T-slot bolt with M16 thread and 160 mm overall length for secure clamping; supplied in grade 8.8 with nut and washer for immediate installation. Order or request technical advice via Metav Werkzeuge for prompt delivery and expert support. T-slot bolt DIN 787 (18 mm T-slot, M16, 160 mm) — AMF A T-slot bolt DIN 787 engineered for reliable clamping in 18 mm T-slots on machine tables and fixturing systems. DIN 787 standard compliance Fits 18 mm T-slots M16 metric thread Grade 8.8 with nut and washer Secure clamping with standardised dimensions The fastener follows the DIN 787 specification, ensuring consistent geometry and interchangeability across standard machine tables. The combination of M16 thread and 18 mm T-slot compatibility offers a proven interface for clamping elements and fixtures, while the 160 mm overall length provides additional reach for deeper setups. The adherence to a recognised norm reduces setup errors and simplifies procurement for production environments. Quick assembly and dependable seating Supplied complete with nut and washer, the bolt is ready for immediate use in typical workshop and machining applications. The provided Axite enrichment dimensions (A: 17.7; B: 100; E: 28; K: 10) describe the head and shoulder geometry that ensures correct seating in the slot and even load distribution. This reduces the need for repeated adjustments and shortens fixture changeover times, contributing to a more efficient machining workflow. Built for workshop rigour and longevity Manufactured to grade 8.8, the component delivers high tensile strength suitable for demanding clamping tasks in industrial applications. The material specification and heat treatment implicit in this grade balance toughness and fatigue resistance, extending service life under cyclic loads. The result is a cost-effective, low-maintenance solution that supports consistent part quality over prolonged production runs. For technical consultation or to arrange supply of the AMF T-slot bolt, contact Metav Werkzeuge GmbH in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4000833340NW Standard: DIN 787 Label: T-slot bolt DIN 787 T-slot 18 mm M16 L 160 mm Güte 8.8 with nut and washer SKU: 4000833340NW Facts Thread: M16 T-slot width compatibility: 18 mm Overall length: 160 mm Packaging unit: 1 Special features Material grade: 8.8 Supplied with: nut and washer Axite enrichment: A: 17.7; B: 100; E: 28; K: 10 Manufacturer: AMF FAQ What standard does this T-slot bolt conform to? The bolt conforms to DIN 787; the AMF T-slot bolt (SKU 4000833340NW) is manufactured to the geometry and tolerances specified in that standard. Is the thread compatible with common clamping hardware? Yes, the M16 metric thread matches widely used clamping nuts and fixtures compatible with M16 threading. Can this fastener be used immediately on delivery? The fastener is supplied with a nut and washer, enabling immediate installation in an 18 mm T-slot without the need for additional fasteners. What does grade 8.8 indicate for this bolt? Grade 8.8 denotes a medium-high tensile strength and heat-treated condition, suitable for general industrial clamping and repetitive use. Are the head dimensions documented for fixture design? The head and seating geometry is given by the Axite enrichment values (A: 17.7; B: 100; E: 28; K: 10), which support correct seating and load distribution in the slot. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Bolt M12 Grade 10.9 DIN 787 - AMF
Take advantage of secure, high‑clamping performance combined with standardised dimensions for quick integration into existing fixturing. The M12 thread and 160 mm overall length deliver predictable engagement in 14 mm T‑slots; order directly via Metav Werkzeuge or consult Metav's technical team for compatibility guidance. AMF T-Nutenschraube DIN 787 T-Nut 14mm M12 L.160mm Güte 10.9 AMF — T-slot bolt for industrial clamping AMF T-Nutenschraube DIN 787 T-Nut 14mm M12 L.160mm Güte 10.9 AMF is a robust T‑slot bolt designed for secure workpiece clamping in machining and assembly fixtures, compatible with standard 14 mm T‑slots and engineered to DIN 787. Compliant with DIN 787 standard Designed for 14 mm T‑slots M12 thread with 160 mm overall length High‑strength Grade 10.9 steel Consistent clamping force for repeatable production The AMF T‑slot bolt conforms to DIN 787, ensuring dimensional compatibility and repeatable installation across standard machine tables and fixtures. Manufactured to Grade 10.9, the fastener offers high‑tensile properties that translate into dependable clamping force under cyclic loads. This reliability reduces setup variation and contributes to consistent part quality in serial production. The combination of a defined thread (M12) and a precise shank profile delivers controlled engagement and straightforward torque‑to‑preload behaviour, important for process stability. Practical dimensions that simplify fixture planning With a seating designed for 14 mm T‑slots and an overall length of 160 mm, the bolt provides ample reach for typical clamping arrangements while remaining compact enough for crowded setups. The specified geometry supports secure seating in the slot head and allows predictable clearance beneath the clamped assembly. These measurable characteristics simplify fixture design calculations and shorten planning time, enabling quicker changeovers. Where projection or washer stacks are required, the consistent nominal length assists in calculating required overloads and recommended torque. Durable choice backed by supply reliability Chosen for applications where downtime must be minimised, the fastener's strength class and standardised form factor make it a durable option for workshops and industrial users. Long service life is achieved by the combination of proven mechanical properties and standard compliance; this reduces the frequency of replacements and contributes to cost‑efficient maintenance cycles. For sourcing and technical clarifications, Metav's industry experience and distribution from Emmerich ensure steady supply and expertise, supporting straightforward procurement for trade and production environments. The product label and SKU facilitate traceability and stock management within existing ordering systems. For secure clamping in industrial fixtures, specify the AMF T‑slot bolt and contact Metav Werkzeuge for prompt supply and expert advice on integration into existing clamping systems. Technical Data Article number: 4000603212NW SKU/UID: 4000603212NW Standard: DIN 787 Facts T‑slot size: 14 mm Thread: M12 Overall length: 160 mm Axial dimensions: A: 13.7; B: 100; E: 22; K: 8 Special features Product type: T‑slot bolt (T‑Nutenschraube) Strength class: Grade 10.9 (Güte 10.9) Manufacturer: AMF FAQ What standard does this T‑slot bolt follow? This T‑slot bolt follows DIN 787, ensuring compatibility with standard 14 mm T‑slots and predictable installation dimensions. Which thread and length are specified for this fastener? The fastener has an M12 thread and an overall length of 160 mm, suitable for common clamping arrangements. Is this bolt suitable for heavy‑duty clamping applications? Yes — the product is manufactured in Grade 10.9, providing high‑tensile performance appropriate for demanding clamping loads. Can this bolt be used with standard 14 mm T‑slot tables without modification? The geometry and dimensions are specified for 14 mm T‑slots and are intended for direct use on compatible tables and fixtures. What information helps with ordering and traceability? Use the SKU 4000603212NW and the product designation on the label to ensure accurate ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Bolt M24 T-Slot 28mm, Grade 8.8 DIN 787 - AMF
Rely on the proven combination of DIN 787 conformity, a M24 threaded shank and grade 8.8 strength for dependable clamping in industrial T‑slot systems; order the part directly via Metav Werkzeuge or consult our specialists for application guidance. AMF T‑nut screw DIN 787 — 28 mm T‑slot, M24 thread, 160 mm length A AMF T‑nut screw DIN 787 designed for secure clamping in 28 mm T‑slots, offering a metric M24 thread and a 160 mm overall length for deep anchoring in machine assemblies. High-strength grade 8.8 steel Metric M24 threaded shank Designed for 28 mm T‑slot rails 160 mm overall length for deep anchoring Precise standardisation for repeatable assembly Conformity to DIN 787 guarantees a standardised interface for T‑slot fastenings, enabling interchangeability across fixtures and machine tables. The combination of the M24 thread and the 28 mm T‑slot specification means the fastener aligns with common European profile systems, reducing measuring and alignment time during assembly. The supplied Axite addition values (A: 27.7; B: 110; E: 44; K: 18) describe the key seating and engagement dimensions, supporting accurate selection for specific rail geometries and helping to avoid trial‑and‑error fitting on the shop floor. Robust clamping performance that cuts downtime Constructed to grade 8.8 strength, the fastener delivers the tensile and yield characteristics required for demanding fixturing tasks. Its 160 mm overall length provides extended engagement for assemblies that require deeper anchoring or thicker clamping stacks, so fewer secondary supports are necessary. The result is a secure connection that maintains clamping force under repeated load cycles, reducing the frequency of retorquing and minimising production interruptions. For engineers and maintenance teams, the fastener represents a durable choice where consistent clamp integrity matters. Practical integration and reduced assembly effort Integration into existing setups is straightforward thanks to the part’s standard geometry and metric thread. The fastener arrives as single units (packaging unit: 1) and is catalogued under SKU 4000603257NW for easy procurement and inventory tracking. Clear technical dimensions and adherence to recognised norms simplify procurement decisions and accelerate assembly instructions for workshop staff. Where bespoke advice or dimensional confirmation is required, Metav’s technical team can advise on compatibility with specific rails and fixtures, ensuring correct selection for production or repair tasks. For procurement of the AMF T‑nut screw and personalised application advice, contact Metav Werkzeuge GmbH to confirm compatibility and arrange supply. Technical Data Article number: 4000603257NW Manufacturer: AMF Standard: DIN 787 Product type: T‑nut screw Thread: M24 T‑slot width: 28 mm Overall length: 160 mm Grade: 8.8 Packaging unit: 1 Dimensions & core data T‑slot: 28 mm Thread size: M24 Overall length: 160 mm Axite: A: 27.7 mm Axite: B: 110 mm Axite: E: 44 mm Axite: K: 18 mm Special features Conforms to DIN 787 for interchangeability High-strength grade 8.8 classification Single-unit packaging for controlled parts issue FAQ Is this fastener compatible with standard 28 mm T‑slot profiles? Yes. The T‑nut screw conforms to DIN 787 and is specified for a 28 mm T‑slot, making it compatible with common European T‑slot rails designed to that profile. What does the grade 8.8 designation indicate for performance? Grade 8.8 denotes a high‑strength steel classification with elevated tensile and yield properties; the AMF T‑nut screw is therefore suitable for demanding clamping tasks that require reliable load retention. Can this fastener be used for deep clamping stacks? Yes. With an overall length of 160 mm, the screw provides extended engagement for deeper clamping arrangements or thicker assemblies where additional anchoring length is beneficial. Where can the Axite dimensions be found and what do they mean? The Axite addition lists the manufacturing seating and engagement measures (A: 27.7; B: 110; E: 44; K: 18), which support precise selection for matching slot geometries and ensuring correct seating depth. What is the catalogue reference for procurement and stock management? The item is listed under SKU 4000603257NW, which should be used for ordering and inventory tracking to ensure accurate fulfilment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Clamping Wedge For T-Nut 16+18mm, DIN 6314 - AMF
Take advantage of robust steel construction, T‑slot compatibility for 16 and 18 mm, and a compact 160 mm length to secure fixtures reliably in milling and clamping setups; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. AMF Spanneisen DIN 6314 – T‑slot clamp for 16 + 18 mm, L 160 mm The AMF Spanneisen DIN 6314 is a heavy‑duty T‑slot clamp engineered for secure workholding in 16 mm and 18 mm T‑slot systems, ideal for milling fixtures and modular clamping tables. Robust steel construction for stable clamping Compatible with T‑nut 16 and 18 mm Length 160 mm for versatile fixture setups Secure clamping that meets DIN 6314 standards The clamp is produced to DIN 6314, ensuring a defined geometry and repeatable performance in industrial environments. Its robust steel construction delivers high contact pressure across the clamping surface, which reduces movement under cutting loads and vibration. Designed to accept standard fasteners for M16 and M18, the component integrates directly into common clamping assemblies, removing ambiguity when planning fixtures. For purchasers seeking predictability, the standardised design supports interchangeability and faster setup times on production lines. Flexible compatibility for faster fixture configuration With compatibility for both 16 mm and 18 mm T‑slots, the clamp simplifies layout decisions and reduces the number of specialised parts required. The 160 mm length offers a balance between reach and rigidity, making it suitable for small to medium workpieces without compromising stability. For users less familiar with T‑slot systems: the clamp slides into the slot and is secured with the corresponding T‑nut, translating clamping force into a locked position that resists lateral and lifting forces. This reduces rework and accelerates changeovers in job shops and toolrooms. Durable supply and quality assurance from a trusted partner Supplied as a single unit (packaging unit: 1), the clamp is specified for repetitive industrial use and straightforward inventory management. The straightforward geometry and absence of delicate coatings mean maintenance is limited to routine inspection and torque control of the fasteners. Metav Werkzeuge’s role as a central supplier adds an extra layer of confidence: local stock in Emmerich acts as a quality filter for the European market and enables dependable fulfilment. For workshops seeking reliable, standardised clamping components, this T‑slot clamp combines predictable performance with ease of procurement. For application advice, compatibility checks or prompt supply from Metav Werkzeuge in Emmerich, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — expert guidance for secure and efficient fixturing with AMF clamping solutions Technical data Article number: 4000833006NW Standard: DIN 6314 Brand: AMF Product type: T‑slot clamp Dimensions & compatibility Length: 160 mm Width: 18 mm T‑slot compatibility: 16 + 18 mm Fastener sizes: M16, M18 Special features Packaging unit: 1 Axite enrichment values: A: 25; B2: 50; B3: 18; E1: 26; E2: 65 FAQ What T‑slot sizes does the clamp fit? The clamp fits 16 mm and 18 mm T‑slot systems as specified by the T‑slot compatibility values. Which fasteners are compatible with this clamp? This clamping component is suitable for use with M16 and M18 fasteners in standard fixture assemblies. Is the clamp supplied individually or in sets? The product is supplied as a single unit; the packaging unit indicated is 1. What standard governs the clamp geometry? The geometry and interchangeability conform to DIN 6314, ensuring repeatable positioning and compatibility with defined clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Screw 28mm M24 DIN 787 Grade 8.8 With Nut And Washer - AMF
Secure high-strength clamping with Grade 8.8 tensile performance, an M24 thread and a 160 mm overall length for deep fixtures in 28 mm T‑slots; order the component directly via Metav Werkzeuge or contact our consultants for tailored guidance. T-slot bolt DIN 787 — 28 mm T-slot, M24, 160 mm (AMF) The T-slot bolt DIN 787, 28 mm T‑slot, M24, 160 mm is a heavy-duty fastening solution for machine tables, fixture plates and modular clamping systems in metalworking environments. T‑slot 28 mm compatible M24 thread for heavy-duty clamping 160 mm overall length for deep fixtures Grade 8.8 strength with nut and washer Robust clamping for demanding fixtures This T‑slot bolt is designed to deliver reliable and repeatable clamping force where secure fixation matters. Conforming to DIN 787, the fastener ensures standardised geometry for insertion into a 28 mm T‑slot, while the M24 thread provides the purchase required for high‑tension applications. The supplied nut and washer reduce assembly steps and help achieve a consistent preload, which in turn lowers the risk of loosening during vibration. For production environments that prioritise uptime, this component supports safer, more stable fixturing and reduces fixture set‑up time through straightforward installation. Clear compatibility and installation guidance Compatibility is straightforward: the fastener fits T‑slots 28 mm and is intended for use with corresponding fixture plates and machine tables. The bolt’s 160 mm overall length accommodates deeper clamping stacks, enabling secure engagement through thick clamps or multiple shims. The supplied dimensional additions — A: 27.7 mm, B: 110 mm, E: 44 mm, K: 18 mm — give precise reference points for planning clamp heights and required thread engagement. These figures allow engineers and fitters to validate clearances and calculate the effective clamp thickness before assembly, reducing trial‑and‑error and streamlining set‑up procedures on the shop floor. Performance class and operational benefits Marked Grade 8.8, the fastener indicates a high mechanical performance suitable for many workshop and industrial clamping tasks. In practice, this means greater resistance to shear and tensile stresses compared with lower‑grade fasteners, supporting heavier loads and frequent tightening cycles. Using a standardised component such as this reduces variability in fixture performance and supports consistent quality control across multiple workstations. The inclusion of nut and washer with the bolt provides a ready‑to‑install assembly, simplifying inventory management and ensuring compatibility between parts supplied as a single unit. For project enquiries, bespoke advice or to secure fast and reliable delivery, contact Metav Werkzeuge GmbH in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our team will assist with selection and supply. Technical data Article number: 4000833364NW Designation: T‑slot bolt DIN 787, 28 mm T‑slot, M24, L 160 mm Brand: AMF Packaging unit: 1 Core dimensions T‑slot width: 28 mm Thread: M24 Overall length: 160 mm Addition: A: 27.7 mm; B: 110 mm; E: 44 mm; K: 18 mm Special features Property class: Grade 8.8 Supplied with nut and washer Standard compliance: DIN 787 FAQ Is this fastener suitable for 28 mm T‑slots? Yes. The product is designed for 28 mm T‑slots and follows the DIN 787 form factors to ensure correct seating and engagement in compatible slots. What standard does the bolt conform to? The bolt is manufactured to DIN 787, which defines the geometry for T‑slot fasteners and supports interchangeability across standard machine tables and fixture systems. What is included in the delivery? Delivery includes the T‑slot bolt with the matched nut and washer, supplied as a ready assembly for immediate installation. Can the bolt handle heavy clamping loads? With a Grade 8.8 classification and an M24 thread, the fastener is suitable for heavy‑duty clamping applications commonly required on machine beds and fixture plates. Which dimensions should be considered when planning a clamp stack? Key dimensions are the 160 mm overall length and the addition measurements A: 27.7 mm, B: 110 mm, E: 44 mm, K: 18 mm, which help calculate available thread engagement and clamp height. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Screw M16 With Nut And Washer, Grade 8.8, DIN 787 - AMF
Take advantage of a robust fastening solution that combines high tensile strength with precise T‑slot compatibility and ready-to-fit assembly. The Grade 8.8 construction and M16 metric thread ensure reliable clamping force while the 160 mm overall length and included nut and washer simplify installation — order directly via Metav Werkzeuge or consult the technical team for application advice. T‑slot screw DIN 787 — M16 × 160 mm, Grade 8.8 — AMF The T‑slot screw DIN 787 (16 mm T‑slot, M16 × 160 mm) by AMF is a high‑strength fastener designed for secure clamping in machine tool T‑slots, fixturing systems and modular fixtures. High-strength Grade 8.8 steel Fits 16 mm T‑slot profiles Metric M16 thread for standard components Supplied with nut and washer Engineered strength for industrial clamping The fastener meets DIN 787, offering a standardized geometry for insertion into machine table T‑slots. Manufactured to Grade 8.8, the screw is made for applications that require a dependable balance of tensile strength and ductility. In practice, this means consistent clamping performance under load and reduced risk of thread failure compared with lower grades. The combination of standardized form and rated material supports predictable assembly cycles and maintenance planning for production environments. Precision fit and straightforward assembly Designed for a 16 mm T‑slot and featuring an M16 metric thread, the component provides straightforward integration with common clamping elements and tooling accessories. Included nut and washer enable immediate use on delivery, reducing on‑site assembly steps. The provided axial dimensions — A 15.7, B 100, E 25, K 9 — describe the head and engagement geometry required to verify clearance and grip depth when planning a clamping setup; these values assist in avoiding interference and ensuring secure seating within the slot profile. Suitable for repeated production use and predictable maintenance A long overall length of 160 mm gives extended engagement where deep clamping is necessary, while the standardised thread and head form simplify spare‑part management. The robust construction and conformity to DIN reduce variability between batches, which supports higher uptime and fewer unplanned stops. For purchasers and maintenance planners, the fastener’s spec sheet aids in compatibility checks with vises, clamping levers and modular fixturing, making it easier to specify replacements or additions within existing tool inventories. Practical guidance and application notes When selecting fastening hardware for machine tables, verify slot width and depth, thread engagement length and the required clamping force for the application. The metric M16 thread is widely supported by standard nuts and threaded inserts, and the inclusion of a washer helps distribute flange loads and protect the slot surface. For specialised materials or high‑temperature environments, refer to application guidelines for suitable coatings or alternative grades; this variant is supplied in plain grade 8.8 steel without additional surface treatment as standard. For application support, custom enquiries or order placement, contact Metav Werkzeuge for technical advice and direct supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833333NW Standard: DIN 787 Product: T‑slot screw, incl. nut and washer Brand: AMF UID: 4000833333NW Facts T‑slot width: 16 mm Thread: M16 Overall length: 160 mm Axial dimensions: A 15.7, B 100, E 25, K 9 Packaging unit: 1 Special features Grade 8.8 steel Supplied with nut and washer For machine table and fixture T‑slots Standardised form for modular fixturing FAQ What T‑slot width does this screw fit? The screw is specified for a 16 mm T‑slot; the head and engagement dimensions correspond to this slot size. Is a nut and washer included with the fastener? Yes, the delivery includes a nut and a washer to allow immediate assembly. Which standard governs the geometry of this fastener? The component conforms to DIN 787, ensuring standardised head and seating geometry for T‑slot applications. Can this screw be used with standard M16 accessories? The M16 metric thread matches common M16 nuts, threaded inserts and accessories used in workshop and industrial clamping. How do the axial dimensions A, B, E and K affect installation? The axial values (A 15.7, B 100, E 25, K 9) define head clearance and engagement length; these help determine slot clearance and maximum usable thread engagement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Clamping Wedge Nr. 6321 0-75mm Height, M16x16x160 Clamp Screw Included - AMF
Take advantage of a compact clamping solution that fits standard 16 mm T-slots while offering a 0–75 mm clamping range and an included M16 x 16 x 160 clamping screw for immediate use; order via Metav Werkzeuge or consult our technical team for application advice. AMF Clamping Jaw Nr. 6321 — clamping prong for 16 mm T-slots, 0–75 mm clamping height The AMF Clamping Jaw Nr. 6321 is designed for secure workholding on tables with a 16 mm T-slot, offering a compact footprint and a simple mounting concept suitable for a broad range of workshop and industrial fixtures. For 16 mm T-slots Clamp height 0–75 mm Includes M16 x 16 x 160 screw Compact 140 mm length, 17 mm width Precise clamping where standardisation matters The clamping prong is built to match the industry-standard 16 mm T-slot, ensuring compatibility with common machine tables and modular fixtures. The clear specification of the T-slot interface removes ambiguity in procurement and reduces downtime caused by mismatched components. As a result, the component supports consistent part positioning and repeatable clamping force in batch production, contributing directly to throughput reliability and assembly-line stability. Adjustable range reduces set-up iterations With a 0–75 mm clamping range, the device offers measurable flexibility for different workpiece heights without additional adapters. This adjustability translates into fewer tool changes and faster clamping cycles, which benefits small-series manufacturing and custom setups. The straightforward height range also simplifies operator instructions and reduces the need for complex fixtures, improving operational efficiency on the shop floor. Ready to install — fewer parts to manage The package includes a M16 x 16 x 160 clamping screw, enabling immediate installation and use. The inclusion of the screw eliminates an extra procurement step and shortens the time from receipt to first clamping operation. The compact overall dimensions — 140 mm length and 17 mm width — ensure the component fits in constrained work zones and integrates easily into existing clamping arrays without obstructing neighbouring elements. Built for workshop practicality and consistent results The design focuses on a no-frills, robust approach that supports daily use in mechanical workshops and production cells. Clear mechanical specifications and a standardised T-slot interface enable planners to integrate the jaw into modular clamping schemes with confidence. For questions on specific applications or to confirm compatibility with existing fixtures, Metav Werkzeuge’s technical advisors are available to provide clarifications and installation guidance. Order the AMF clamping jaw through Metav Werkzeuge for dependable, standard-compatible clamping — contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical data Article number: 4000833067NW Type: Nr. 6321 Product type: Clamping jaw Manufacturer: AMF Dimensions & core data Clamping height: 0–75 mm T-slot width: 16 mm Width: 17 mm Overall length: 140 mm Packaging unit: 1 Features & additions Includes clamping screw M16 x 16 x 160 Label: Spannpratze Nr.6321 f. T-Nut 16mm Spann-H.0-75mm UID: 4000833067NW Compact footprint for modular fixtures FAQ Which T-slot size is this clamping jaw made for? The clamping jaw is designed for a 16 mm T-slot, matching standard table profiles used in many fixtures. What is the adjustable clamping height range? The device provides a 0–75 mm clamping range, allowing adaptation to varying workpiece heights. Is a clamping screw supplied with the item? Yes — the delivery includes a M16 x 16 x 160 clamping screw for immediate installation. What are the overall dimensions to check for fit? The component has an overall length of 140 mm and a width of 17 mm, suitable for compact arrangements. Can the clamping jaw be used immediately in a modular clamping system? The AMF clamping jaw is made to integrate with standard 16 mm T-slot systems and includes the required screw for straightforward mounting. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Nut 14mm M12 with Strength Class 10, DIN 508 - AMF
Robust, standardised clamping for 14 mm T-slots with a compact 16 mm profile and M12 thread delivers dependable fixation and simple interchangeability; use the secure strength class 10 design for demanding workholding. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot Nut DIN 508 T‑Slot 14 mm M12 AMF — compact 16 mm height, M12 thread A T-slot Nut DIN 508 T‑Slot 14 mm M12 AMF designed for secure, standard-compliant clamping on machine tables and clamping fixtures. DIN 508 standard conformity For 14 mm T-slots M12 threaded connection Strength class 10 clamping security Consistent, standard-compliant workholding for production Compliance with DIN 508 ensures predictable fitting and interchangeability across a wide range of machine tables and fixtures. The combination of a 14 mm T-slot profile with an M12 thread provides a balance between compact size and mechanical strength, allowing straightforward integration into existing setups. This standard-based approach reduces setup time and minimises the risk of mismatched components, supporting smoother production flows and fewer interruptions in clamping operations. Low-profile design that aids compact assemblies The 16 mm height offers a low-profile solution where space above the T-slot is limited. This compact build helps maintain a low centre of gravity for clamped parts and permits closer stacking of clamping elements, which is useful in multi-fixture arrangements or when working with tall workpieces. The narrow profile also simplifies access for spanners and torque tools while keeping the clamping point stable, enabling efficient use of available table space without sacrificing hold. Secure threaded connection for repeatable clamping An M12 threaded interface combined with a strength class 10 rating gives a high clamp-force capability relative to the component size. This means reliable fixation under cyclical loads and during machining operations where forces can vary. The numeric parameters A: 13.7, E: 22 and K: 8 describe the critical contact and installation dimensions that determine how the nut seats in the slot and how load is distributed; such detail supports predictable torque settings and safer, repeatable clamp results. Interchangeability, traceability and industrial suitability Marked by a clear label and SKU, the component is suitable for systematic inventory and maintenance procedures. The standard format eases replacement and stocking decisions in workshops and production facilities that favour modularity. For procurement and quality assurance, the SKU 4000833204NW and brand AMF provide traceability for parts lists and servicing, while the packaging unit of 1 simplifies single-item supply for targeted repairs or adjustments. Choose the AMF T-slot nut for standardised, high-strength clamping and contact Metav Werkzeuge for fast supply and expert advice from Emmerich Technical Data Article number: 4000833204NW Label: T-Nutenstein DIN 508 T-Nut 14mm M12 AMF Brand: AMF Product type: T-Nutenstein Facts Height: 16 mm T-slot width: 14 mm Thread: M12 A: 13.7 mm E: 22 mm K: 8 mm Strength class: 10 Packaging unit: 1 Special features DIN 508 compliance Compact low-profile design Threaded M12 connection Traceable SKU for procurement FAQ Is this component compatible with 14 mm machine T-slots? Yes. The T-slot nut conforms to DIN 508 and is specified for 14 mm T-slots, making it compatible with standard 14 mm slot profiles. What thread size does the nut use and what does that mean for clamping? The nut features an M12 thread; combined with strength class 10, this allows higher clamp forces compared with smaller threads, improving fixation during machining. What are the key installation dimensions to check? Relevant dimensions include A: 13.7 mm, E: 22 mm and K: 8 mm, which determine seating and load distribution in the T-slot and influence torque and engagement depth. Can the part be identified for ordering and maintenance? Yes. The item is listed under SKU 4000833204NW and labelled as T‑Nut 14mm M12 by AMF, facilitating procurement and inventory control. Is this suitable for heavy-duty industrial use? The strength class 10 rating and M12 thread indicate suitability for demanding clamping tasks where reliable fixation and repeatable torque behaviour are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com