200mm Clamping Bar for T-Slot 20/22mm, DIN 6316 - AMF
Take advantage of a standardised, fast and reliable clamping solution that supports both 20 mm and 22 mm T-slots and is suited for M20 and M22 fastenings; secure procurement and expert advice are available through Metav Werkzeuge for seamless workshop integration. AMF clamping bar (DIN 6316) for T-slot 20 + 22 mm, 200 mm The AMF clamping bar (DIN 6316) is a compact, machine-table clamping component designed for secure fixture work in benches and milling tables with 20 mm and 22 mm T-slots. DIN 6316 compliance for standardised clamping Fits T-slots 20 mm and 22 mm Length 200 mm for versatile use Compatible with M20 and M22 fastenings Faster setups through a standards-based fixture The DIN 6316 specification ensures that the clamping geometry and interfaces adhere to established workshop norms, which reduces fitting ambiguity and streamlines setup procedures. With a repeatable geometry, changeovers become more predictable and setup time is reduced, helping to keep machine downtime to a minimum. This benefit is particularly relevant for production environments where process reliability and rapid fixture exchange matter. One component for two common T-slot sizes Designed to work with both 20 mm and 22 mm T-slot systems, the clamping bar eliminates the need to hold separate stocks for each slot size. Compatibility with M20 and M22 fastenings further simplifies inventory and tooling decisions, allowing a single fixture element to serve multiple table standards. The resulting consolidation supports leaner stores and fewer procurement lines without sacrificing flexibility. Reliable hold and predictable performance in everyday use Engineered and manufactured to comply with the stated standard, the clamping bar delivers consistent interface fits and predictable clamping behaviour. The standard conformity supports repeatable clamping forces and accurate positioning, which contributes to improved process stability and reduced rework. For workshops aiming for dependable results across routine machining, the standardised component is a straightforward way to raise consistency without complex retrofitting. For straightforward integration and dependable supply of AMF clamping components, contact Metav Werkzeuge for ordering and product selection support—Metav Werkzeuge offers technical advice and reliable delivery from Emmerich to your workshop. Technical Data Article number: 4000833062NW Norm: DIN 6316 Designation: Spanneisen DIN 6316 for T-slot 20+22 mm L.200 mm AMF Product type: Clamping bar Manufacturer: AMF Packaging unit: 1 Facts Width: 22 mm Total length: 200 mm T-slot compatibility: 20 + 22 mm Suitable for: M20, M22 Special features Standardised interface to DIN 6316 Dual T-slot compatibility (20 mm and 22 mm) Direct fit for M20 / M22 fastenings Compact 200 mm length for versatile clamping FAQ What tables will this clamping bar fit? The clamping bar is suitable for machine tables and fixtures with 20 mm or 22 mm T-slots, offering direct compatibility without adaptors. Can this component be used with M20 and M22 bolts? Yes, the design supports fastenings in M20 and M22, enabling secure attachment to standard clamping systems. Is the clamping geometry compliant with an established standard? The clamping bar meets DIN 6316, guaranteeing standardised interface geometry and predictable fit on compliant tables. What length is the clamping bar and how does that affect use? At 200 mm overall length, the bar provides a compact clamping span suitable for tight fixtures and modular setups where space is limited. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Bar T-Slot 24/28mm DIN 6316, For M24 Thread - AMF
Take advantage of standardised compatibility, robust clamping performance and simple integration into existing T‑slot table setups — order the component via Metav Werkzeuge or contact our consultants for specification matching. AMF clamping iron (DIN 6316) for T‑slot 24/28 mm, 200 mm AMF clamping iron (DIN 6316) for T‑slot 24/28 mm, 200 mm offers a standardised clamping solution for machine tables with T‑slots of 24 and 28 mm, designed to integrate with M24 clamping systems. Standardised DIN 6316 compliance Fits T‑slot 24 and 28 mm 200 mm usable length Compatible with M24 clamping bolts Predictable clamping performance for production environments Built to the requirements of DIN 6316, this clamping component delivers consistent clamping force across repeated cycles, reducing set‑up variability. The standard ensures that the part interfaces correctly with industry‑standard fixtures, which streamlines tool changes and shortens machine down‑time. The measured geometry and finish contribute to stable seating in the slot, which supports repeatable machining tolerances and protects workpiece alignment over longer runs. Flexible fit for common T‑slot sizes reduces tooling complexity Designed for T‑slot widths 24 mm and 28 mm, the component removes the need for multiple bespoke clamps for different tables. The dual‑slot compatibility and M24 thread suitability mean existing clamping bolts and accessories can be re‑used, lowering inventory complexity. The adaptable fit is particularly beneficial for mixed‑workshop environments where machines from different eras or manufacturers coexist. Straightforward integration and clear installation benefits With a usable length of 200 mm, the clamping element is suitable for a wide range of fixtures and workpiece dimensions while keeping the installation simple. The plain, engineered geometry allows quick placement in the slot and standard torque application of M24 hardware, supporting rapid set‑up. Clear dimensional conformity aids maintenance planning and spare‑part management, helping to maintain uptime and predictable production throughput. For standardised and reliable clamping choose the AMF clamping iron and contact Metav Werkzeuge for specification advice and fast supply direct from Emmerich Technical data Article number: 4000833063NW Label: Spanneisen DIN 6316 f.T-Nut 24+28mm L.200mm AMF Type: Clamping iron Standard: DIN 6316 Manufacturer: AMF Facts T‑slot compatibility: 24 + 28 mm Width: 26 mm Total length: 200 mm Fits thread: M24 Axite enrichment: Addition: A: 35; B2: 70; B3: 35; C: 25; E1: 76,5; E2: 60 Special features Packaging unit: 1 UID: 4000833063NW FAQ Which standard does this clamping component meet? The clamping iron conforms to DIN 6316, ensuring standardised dimensions and compatibility for table clamping applications. Which T‑slot sizes are supported? The component is designed for T‑slot 24 and 28 mm, enabling use across common machine tables without special adapters. What thread size is required for bolts? The part is compatible with M24 clamping bolts, matching typical heavy‑duty clamping hardware. What is the usable length of the clamping element? The total length is 200 mm, offering a practical clamping span for a broad range of workpieces. Is this component suitable for mixed workshop setups? Yes, the dual T‑slot compatibility and standard thread interface make the clamping iron well suited to mixed environments where flexibility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Wedge For T-Slot 20/22mm, DIN 6314 - AMF
Take advantage of the combination of standardised design and straightforward compatibility: a compact clamp built to DIN 6314 for secure fixation in T‑slots 20 and 22 mm, with a 200 mm length that suits many fixture arrangements. Order directly via Metav Werkzeuge or request specialist advice if application specifics require clarification. Clamping Bar DIN 6314 (AMF) – for T‑slot 20 + 22 mm, 200 mm A Clamping Bar DIN 6314 engineered to secure workpieces in machine‑table T‑slots 20 and 22 mm, suitable for fixtures using M20 or M22 fittings. Conforms to DIN 6314 standard Fits T‑slots 20 and 22 mm Length 200 mm for flexible setups Compatible with M20 and M22 fittings Secure clamping engineered for machine tables The clamping bar follows the DIN 6314 specification, ensuring dimensional compatibility with established fixture systems and repeatable performance across setups. Use in T‑slots of both 20 mm and 22 mm reduces the need for adapters and supports consistent positioning. This standard conformity means fewer alignment checks and a predictable interface with common clamping elements, contributing to shorter set‑up times and improved process reliability. Versatile integration with existing fixtures With an overall length of 200 mm and a working width of 22 mm, the component integrates cleanly into modular clamping arrangements. Compatibility with M20 and M22 fittings allows the bar to accept widely used stud and nut sizes, making it simple to combine with established clamping hardware. The compact dimensions favour cramped or multi‑station tables where space optimisation and flexible placement are essential for efficient throughput. Practical benefits for everyday workshop use Selecting a standardised clamping solution reduces complexity in inventory and speeds decision‑making during job changes. The compatibility with common T‑slot sizes and thread standards supports cross‑machine use, limiting the number of unique parts required. Fewer specialised components mean less downtime for replacements and a more resilient workshop supply chain, which is particularly valuable in small to medium‑sized fabrication environments. Technical clarity for procurement and planning Specifying a component to a recognised norm simplifies procurement checks and quality assurance procedures. The standard reference and clear dimensional data provide a verifiable basis for ordering and for cross‑referencing with existing fixtures and tooling. Where exact machine table tolerances or fixture geometries must be checked, the normative designation facilitates direct comparison with technical drawings and supplier catalogues. For reliable fixture integration with the AMF clamping bar, contact Metav Werkzeuge for fast supply and expert product guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833008NW Label: Spanneisen DIN 6314 f.T‑Nut 20+22mm L.200mm AMF Product type: Clamping bar Manufacturer: AMF Facts Standard: DIN 6314 T‑slot: 20 + 22 Width: 22 mm Overall length: 200 mm Suitable for: M20, M22 Packaging unit: 1 Special features Conforms to machine‑table clamping norms Simple integration into standard fixtures Axite enrichment: Addition: A: 30; B2: 60; B3: 22; E1: 30; E2: 80 FAQ What standard does this clamping bar comply with? The clamping bar is specified to DIN 6314, providing a recognised norm for dimensions and interface with machine‑table systems. Which T‑slot sizes are supported? This item supports T‑slots 20 mm and 22 mm, enabling direct use in tables designed for either slot profile. Is the bar suitable for M20 and M22 fastenings? Yes, the component is suitable for fittings and studs in M20 and M22 sizes. What is the overall length and width of the clamp? The bar has an overall length of 200 mm and a working width of 22 mm, suited to compact and modular setups. Does the product include mounting hardware? The product is supplied as a single unit (packaging unit: 1); separate mounting elements are not listed in the specification Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dowel Screw M12x200 Hardened Grade 10.9 DIN 6379 - AMF
Take advantage of a high-strength fastening solution that combines DIN 6379 conformity, an M12 threaded connection and a heat-treated property class 10.9 for reliable performance in industrial assemblies; order the stud bolt directly via Metav Werkzeuge or consult our specialists for specification support. AMF stud bolt DIN 6379 M12 x 200 mm, heat-treated to 10.9 A AMF stud bolt DIN 6379 M12 x 200 mm engineered for secure, high-load fastening in machine construction, fixtures and maintenance applications. *Stud bolt to DIN 6379 specification *Heat-treated to property class 10.9 *M12 threaded connection, robust fit *Overall length 200 mm, thread length 122 mm Consistent high tensile performance for demanding assemblies The stud provides high tensile strength through targeted heat treatment to property class 10.9, which significantly increases load-bearing capacity compared with lower classes. This results in reduced risk of fastener failure under cyclical or shear loads and contributes to longer service intervals. The combination of standard conformity and enhanced strength supports safe assembly designs and helps maintain production continuity where component integrity is critical. Defined dimensions and standard conformity that simplify planning Conformity to DIN 6379 ensures interchangeability and predictable fitment in standardised components. With an M12 thread and an overall length of 200 mm, the fastener suits applications requiring extended engagement length. The specified thread length b: 122 mm gives clarity for design calculations and enables correct selection of mating nuts and washers. These measurable values simplify ordering, inventory management and engineering documentation. Practical advantages in procurement and workshop workflows Supplied in single-unit packaging and identified by SKU 4000833263NW, the fastener supports targeted stocking for repair and assembly tasks. The clear specification reduces query time during procurement and the robust mechanical properties minimise rework due to inadequate hardware. Where reliability and traceability are priorities, the fastener represents a practical option for production workshops and maintenance teams that value predictable performance and easy replacement. For secure, high-strength fastening solutions and procurement assistance for AMF stud bolts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply options. Technical data Article number: 4000833263NW Brand: AMF Product type: Stud bolt Standard: DIN 6379 Facts Thread: M12 Overall length: 200 mm Width across flats: 15 mm Thread length (b): 122 mm Special features Heat-treated to property class 10.9 Single unit packaging Industrial fastening for machine construction and fixtures FAQ What strength class does this stud bolt have? The stud bolt is heat-treated to property class 10.9, providing high tensile capacity suitable for demanding fastening tasks. Is the fastener compliant with recognised standards? Yes, the fastener conforms to DIN 6379, ensuring standardised dimensions and interchangeability in industrial assemblies. What are the critical dimensions for design integration? Key dimensions are M12 thread, overall length 200 mm and a thread length b: 122 mm, which should be used when specifying mating components. Can this stud bolt be used with common M12 nuts and washers? Compatibility with standard M12 nuts and washers is expected when matched to the stud’s thread specification and property class. How is the product identified for ordering or stock? The item is listed under SKU 4000833263NW, facilitating clear ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar 14mm Slot For M12 M14 Clamping Screw, DIN 6315B - AMF
Take advantage of the combination of reliable clamping geometry, compatibility with standard clamping screws and straightforward integration into existing fixtures for uninterrupted workshop operation. Order the fork clamp bar directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Fork clamp bar DIN 6315B, slot 14 mm, L 200 mm – AMF The Fork clamp bar DIN 6315B is a fork-style clamping element designed for fixture and workholding applications in metalworking and general workshop environments, compatible with standard M12 and M14 clamping screws. Fork clamp bar, DIN 6315B standard Slot width 14 mm for positive engagement Overall length 200 mm, compact installation Compatible with clamping screws M12 and M14 Secure clamping with standardised geometry The fork-style clamping element provides a repeatable clamping interface based on the DIN 6315B standard, ensuring predictable positioning and force transmission within fixtures. The 14 mm slot offers secure engagement with corresponding clamping screws, reducing lateral play and enabling stable clamping even under intermittent load changes. This standardised form factor simplifies part selection for production cells and jigs, lowering engineering time and increasing process reliability. Compact length that supports diverse fixtures With a 200 mm overall length, the component fits within space-restricted setups while delivering sufficient contact surface for reliable clamping. The compact dimensions facilitate use in modular clamping systems, specialised fixtures and retrofit operations where a full-length bar would be impractical. The short profile also aids in rapid handling during assembly operations and minimises interference with adjacent tooling. Engineered for compatibility with common clamping hardware Specified for use with M12 and M14 clamping screws, the fork clamp bar integrates seamlessly into prevailing workshop inventories and clamping architectures. Compatibility with these thread sizes means the element can be combined with a wide range of screws, studs and nuts without the need for bespoke fasteners. This interoperability reduces procurement complexity and supports quick replacement during maintenance cycles. Robust application focus and material expectations Designed as a clamping accessory for industrial use, the component exhibits a sturdy fork form that resists deformation under typical clamping forces. The geometry concentrates clamping loads through the slot and fork arms, which helps maintain alignment and reduces the risk of slippage. For applications requiring consistent hold-down pressure in machining or assembly, the fork clamp bar offers a pragmatic balance between mechanical simplicity and functional resilience. Integration advice and practical benefits The standardised profile is suitable for repeatable production setups and one-off jigs alike; the element can be mounted directly to fixture plates or incorporated into clamp arms. The clear specification of slot width and length allows planners to calculate engagement depth and leverage in advance, which supports cycle-time optimisation and predictable tool life. Traceable standards and simple interchangeability contribute to lower total cost of ownership across workshop fleets. For application advice or to arrange suitable delivery from stock, contact Metav Werkzeuge; technical consultants can advise on compatibility with existing clamping hardware and fixture layouts Technical Data Article number: 4000833025NW UID: 4000833025NW Brand: AMF Product type: Clamping bar (fork version) Facts Slot width: 14 mm Overall length: 200 mm Suitable for: M12, M14 Packaging unit: 1 Standard: DIN 6315B Additional values: A: 25; B2: 38; B3: 12; B4: 6 Special features Fork version (Gabelausführung) Designed for use with clamping screw M12 and M14 Compact design for restricted installation spaces FAQ What is the recommended screw size for this fork clamp bar? The fork clamp bar is specified for use with clamping screws M12 and M14, allowing integration with common workshop fastenings. Is the fork clamp bar compliant with any standard? Yes, the component follows the DIN 6315B standard, providing standardised geometry for predictable fixture behaviour. Can this clamping element be used in confined fixture spaces? Its 200 mm overall length and compact fork design make the element suitable for installations with limited clearance where conventional long bars would not fit. How does the 14 mm slot affect clamping performance? The 14 mm slot ensures positive engagement with matching screws, reducing lateral play and improving stability during machining or assembly processes. What should be considered when replacing an existing clamping bar? Attention to slot width, overall length and compatible screw size is essential; the fork clamp bar offers direct interchangeability where DIN 6315B geometry and M12/M14 hardware are already in use. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot 18mm For M16 M18 Screw - AMF
Take advantage of the fork-style geometry, slot width 18 mm and 200 mm length to achieve stable, repeatable clamping with standard M16/M18 screws; the compact form factor supports efficient fixture layouts and faster setup. Order the component directly via Metav Werkzeuge or ask the consultants for application guidance. Fork clamping bar No. 6315GN – fork-style clamping bar with 18 mm slot, 200 mm length (AMF) Fork clamping bar No. 6315GN is a fork‑type clamping component designed for integration into standard clamping fixtures and supports secure engagement with M16 and M18 clamping screws Fork-style design for secure engagement Slot width 18 mm for standard clamping bars Length 200 mm for versatile workpieces Compatible with M16 and M18 clamping screws Consistent, repeatable grip for precision clamping The fork geometry provides a defined contact interface that reduces lateral movement and improves repeatability during machining and assembly tasks. With a slot width of 18 mm and an overall length of 200 mm, the component aligns with common clamping profiles, enabling reliable force transfer from the clamping screw to the workpiece. This results in fewer re‑set cycles and more consistent part quality, which is particularly beneficial in small‑batch production or jigs where positional accuracy matters. Faster set-up and easier fixture integration Standardised dimensions make the component straightforward to incorporate into existing fixture concepts, cutting time spent on adaptations. The fork design accepts M16 and M18 clamping screws, so conventional threaded clamping elements can be used without custom interfaces. This compatibility reduces procurement complexity and shortens assembly time, allowing shops to maintain throughput while simplifying the bill of materials for clamping systems. The clear geometry also simplifies CNC programming and manual positioning. Robust solution for industrial clamping applications Designed for repeatable use in workshop and production environments, the fork clamping bar supports typical clamping workflows and machine table arrangements. The open fork allows quick engagement with clamping screws and provides tactile feedback during tightening, which helps operators verify secure seating without extra gauges. Supplied as a single unit, the component is suited to both retrofit projects and new fixture builds where compact, dependable clamping elements are required. Contact Metav Werkzeuge for tailored advice on fixture integration or to secure the AMF fork clamping bar for the next production run; Metav Werkzeuge’s specialists in Emmerich provide practical support and reliable supply for precision clamping components Technical data Article number: 4000833040NW Product type: Clamping bar Brand: AMF Type designation: Fork version No. 6315GN Facts Slot width: 18 mm Length L1: 200 mm L2: 57 mm L3: 36 mm A: 30 B2: 50 B3: 28 Suitable for: M16, M18 Special features Fork-style execution For clamping screw M16, M18 Packaged unit: 1 Label: Gabelspanneisen No.6315GN Schlitz-B.18mm L.200mm FAQ Is the fork clamping bar compatible with M16 and M18 screws? Yes. The fork clamping bar No. 6315GN by AMF is specified for use with M16 and M18 clamping screws and is designed to accept those thread sizes directly. What are the slot and overall length dimensions? The component features a slot width of 18 mm and an overall usable length of 200 mm, dimensions that suit standard clamping arrangements. Can the component be used in existing clamping fixtures? Yes. The fork geometry and standard measurements allow straightforward integration into many existing fixture systems without major modification. Is the fork clamping bar suitable for precision repeatability tasks? The defined fork contact and standardised geometry support repeatable seating and consistent clamping force, making it suitable for precision clamping applications and repeatable setups. What is the article number for ordering? The article number (SKU) is 4000833040NW for the AMF fork clamping bar No. 6315GN Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot 26mm For M24 Clamping Screw DIN 6315B - AMF
Take advantage of the proven combination of standard conformity, robust fork design and precise slot sizing for dependable workholding; order directly via Metav Werkzeuge or consult the team for integration advice. AMF Fork Clamping Wedge DIN 6315B — 26 mm slot, 200 mm overall length The AMF fork clamping wedge is a DIN 6315B-compliant clamping element in fork design, intended for workholding with an M24 clamping screw in machine tables and fixture assemblies. Fork design for confined setups DIN 6315B standardised compatibility 26 mm slot for M24 clamping screw 200 mm overall length for deep reach Reliable standardisation for faster setup and fewer interruptions The wedge is manufactured to the DIN 6315B specification, which ensures interchangeability and predictable behaviour in standardised fixtures. With a fork design that provides access around pre-installed components, the component supports quicker installation and reduced machine downtime. The combination of standard conformity and a clear mechanical interface delivers a rational advantage for production environments that demand consistent clamping results and minimal adjustment time. Practical geometry that makes clamping both precise and accessible A 26 mm slot dimension accepts the specified M24 clamping screw without compromise, translating thread engagement into repeatable clamping force. The 200 mm overall length offers extended reach for deeper jaws or thicker setups while maintaining alignment under load. This geometry reduces the need for bespoke adaptors and simplifies fixture design, so planners and technicians benefit from efficient assembly and improved repeatability when building or reconfiguring workholding systems. Integration-ready design and specification details for procurement Measured values and compliance simplify procurement and inventory management: the part ships as a single unit and integrates directly into DIN-based systems. The listed enrichment data (Axite values) supports sorting and selection where multiple variants are used in a clamping portfolio. As a robust, standardised component, this clamping wedge helps maintain a consistent quality level across jobs and workshops, supporting both small-scale maintenance and industrial fixture supply chains. Contact Metav Werkzeuge for product availability and tailored integration advice on the AMF fork clamping wedge (SKU 4000833032NW) — expert assistance from Emmerich for seamless delivery to the workshop Technical data SKU: 4000833032NW Manufacturer: AMF Product type: Clamping wedge Type: Fork design Standard: DIN 6315B Facts Slot width: 26 mm Overall length: 200 mm Suitable for clamping screw: M24 Packaging unit: 1 Special features Fork execution for component access Compliance with DIN 6315B Axite enrichment: A: 40; B2: 66; B3: 20; B4: 10 FAQ What clamping screw fits this wedge? The AMF fork clamping wedge is designed for use with an M24 clamping screw and a 26 mm slot to ensure correct thread engagement and reliable clamping. Is the wedge compatible with standard DIN fixtures? Yes, the component conforms to DIN 6315B, allowing direct integration into standardised fixture systems and simplifying interchangeability. Can the wedge reach deeper jaws or thicker setups? The 200 mm overall length provides extended reach for deeper jaws and thicker workpieces while maintaining alignment under load. How is the part supplied for inventory and ordering? The item is supplied in a packaging unit of one; reference the SKU 4000833032NW when ordering to ensure the correct variant is delivered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot Width 14mm For M12 M14 Clamping Screw - AMF
Benefit from robust fork-style clamping, precise fit and straightforward integration into existing fixtures for a dependable production flow; order the clamping bar directly via Metav Werkzeuge or consult our specialists if required. Fork-style clamping bar No. 6315GN – 14 mm slot, 200 mm length (AMF) A fork-style clamping bar No. 6315GN designed for machine-shop clamping operations and compatible with M12 and M14 clamping screws. Fork design for secure clamping 14 mm slot width 200 mm overall length Compatible with M12 and M14 screws Secure, repeatable clamping for routine setups The fork configuration delivers a stable contact surface that reduces lateral movement during clamping and supports repeatable workholding. The 14 mm slot provides a defined seating for clamp elements and is suitable for standard clamping hardware, while the 200 mm overall length keeps the workpiece engaged over a useful span. These measurable attributes translate into fewer setup iterations and a more predictable machining process, enhancing throughput without complex adjustments. Fast integration with standard clamping screws and fixtures Compatibility with M12 and M14 clamping screws enables quick assembly into existing fixture arrays and T-slot setups where those thread sizes are already in use. The fork-style geometry simplifies alignment of the clamping screw and mating components, which shortens assembly time and reduces the risk of misalignment. This component is intended to support efficient workflows by enabling straightforward retrofitting and faster changeovers in production and maintenance contexts. Practical considerations, serviceability and supplier trust Delivered as a single unit, the component is intended for direct installation into workshop clamp systems and requires only the corresponding M12 or M14 fastening hardware. For complex fixtures or unusual mounting conditions, technical clarification is available from Metav Werkzeuge to ensure correct selection and integration. Metav combines decades of precision experience, a broad product range and established supply reliability—backed by more than 48,000 satisfied customers—so buyers benefit from a dependable sourcing partner as well as the component itself. For tailored advice on implementing the AMF fork-style clamping bar No. 6315GN in a specific fixture or production line, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast, expert guidance and supply options. Technical data Article number: 4000833039NW Manufacturer: AMF Product: Clamping bar (fork design No. 6315GN) Packaging unit: 1 Label: Fork clamping bar No. 6315GN, slot 14 mm, length 200 mm, for clamping screws M12, M14, AMF Facts Slot width: 14 mm Overall length: 200 mm A: 25 mm B2: 40 mm B3: 24 mm L2: 47 mm L3: 30 mm Suitable for: M12, M14 Special features Fork design For use with clamping screws M12 and M14 Single-piece packaging (1) UID / SKU: 4000833039NW FAQ Which clamping screws are compatible? The fork-style clamping bar No. 6315GN (AMF) accepts M12 and M14 clamping screws; see SKU 4000833039NW for ordering. What are the key dimensions to check before fitting? The main dimensions are a 14 mm slot width and a 200 mm overall length for the AMF fork clamping bar No. 6315GN (SKU 4000833039NW). How is the component supplied? The AMF clamping bar No. 6315GN is supplied as a single unit (packaging unit 1). Is the fork clamping bar suitable for standard workshop fixtures? The fork geometry of the AMF No. 6315GN is intended for standard workshop clamping applications and integrates with fixtures designed for M12 or M14 screws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot Width 22mm For M20/M22 Clamping Screws DIN 6315B - AMF
Take advantage of the DIN 6315B fork design, the 22 mm engagement slot and compatibility with M20 / M22 clamping screws for dependable workshop fixturing; order the component directly via Metav Werkzeuge or consult the technical team if clarification is required. Fork clamping bar DIN 6315B — fork design, 22 mm slot, 200 mm length (AMF) A fork clamping bar DIN 6315B engineered for secure machine-table fixturing and modular clamping setups, compatible with common M20 and M22 clamping screws. Fork design to DIN 6315B standard Slot width 22 mm for secure engagement Length 200 mm for versatile clamping setups Compatible with M20 and M22 clamping screws Reliable standard compliance for precise fixture positioning Compliance with DIN 6315B ensures a defined geometry and repeatable engagement in serial or single-part clamping operations. The fork design locates and supports the clamping element, reducing lateral play and improving positional repeatability during tightening cycles. This standard conformity simplifies selection for production environments and supports consistent results across multiple fixturing stations, contributing to a more efficient machining workflow. Practical dimensions that reduce setup time The combination of a 22 mm engagement slot and 200 mm overall length provides a balance between reach and rigidity. The slot width matches common clamping screw heads, enabling seamless integration with M20 and M22 hardware and reducing the need for adapters. In practice, this compatibility accelerates fixture assembly and helps maintain constant clamp force distribution, which in turn reduces rework and machine idle time. Robust integration into workshop systems Designed as a modular element for clamping assemblies, the bar from AMF supports repeatable engagement and straightforward inventory management. The fork configuration pairs well with standard clamping screws, making it an economical choice for toolrooms and production lines that prioritise reliability and interchangeability. The clear specification and compact form support easy replacement and predictable behaviour in demanding everyday use. Order the AMF fork clamping bar via Metav Werkzeuge for dependable fixturing solutions — contact Metav Werkzeuge for technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 4000833029NW Label: Gabelspanneisen DIN 6315B Schlitz-B.22mm L.200mm f.Spannschraube M20,M22 AMF Product type: Clamping bar Model: Fork design Manufacturer: AMF Dimensions / Core data Slot width: 22 mm Length: 200 mm Packaging unit: 1 Axite enrichment: Addition: A: 40; B2: 52; B3: 15; B4: 10 Features / Applications Compatible with clamping screws M20, M22 DIN 6315B fork configuration Suitable for modular clamping systems and machine-table fixturing FAQ What standard does the fork clamping bar follow? The fork clamping bar follows the DIN 6315B standard, ensuring standardised geometry and predictable fixturing behaviour. Which clamping screws are compatible with this bar? Compatibility is provided for M20 and M22 clamping screws, allowing direct use with common workshop hardware. What are the slot width and overall length? The slot width is 22 mm and the overall length is 200 mm, designed to balance engagement and rigidity. Is this component suitable for automated fixture systems? Yes; the defined fork geometry and standardised dimensions make this bar appropriate for automated or modular clamping setups where repeatability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamping Jaw Slot 18mm For M16 M18 Clamping Screw DIN 6315B - AMF
Benefit from a compact fork-style clamping solution that combines DIN 6315B conformity with an 18 mm slot and a 200 mm overall length, providing reliable engagement with M16 and M18 clamping screws for straightforward fixture integration. Order the component directly via Metav Werkzeuge or consult the technical advisors for specification matching and rapid delivery. Fork clamping bar DIN 6315B (AMF) — fork design with 18 mm slot, 200 mm length The fork clamping bar DIN 6315B is a compact fork‑style clamping element engineered for secure workholding in fixture and jig assemblies, compatible with common M16 and M18 tension screws. DIN 6315B conformity for standardised fit 18 mm slot width for secure fork engagement 200 mm overall length for extended reach Suitable for M16 and M18 clamping screws Reliable, standardised clamping for fixture construction Conformity to DIN 6315B ensures interchangeability and predictable mounting dimensions across fixtures and machine tables. The fork execution gives positive engagement around clamping screws and studs, reducing the risk of lateral displacement during tightening. For production environments where repeatability matters, the standardised geometry simplifies spare‑part management and minimises machine downtime by enabling direct replacement without reworking existing setups. Faster set‑up and simpler integration into existing assemblies With an overall length of 200 mm, the component offers additional reach compared with shorter clamping bars, which helps when accessing recessed or hard‑to‑reach clamping points. The 18 mm slot aligns with common fork interfaces and accepts M16 and M18 tension screws for secure fastening. This compatibility reduces adapter requirements and shortens assembly time, resulting in measurable gains in workshop efficiency and throughput. Practical design that supports daily workshop demands The fork design keeps assembly and inspection straightforward: the open slot simplifies mounting and visual checks, while the compact form factor minimises interference with adjacent tooling. Supplied in single units, each item is easy to store and replace as part of a modular fixturing strategy. The clear specification facilitates procurement and inventory control, supporting a predictable supply chain for production and maintenance teams. Typical applications and who benefits most This clamping element is intended for fixture builders, machine shops and maintenance departments requiring standardised fork‑type clamping for jigs, welding fixtures or machining fixtures. The product is especially suitable where conventional clamping screws (M16, M18) are already in use, enabling quick retrofits and consistent clamping performance across multiple workstations. Contact Metav Werkzeuge for tailored fixturing advice or order the fork clamping bar through Metav Werkzeuge to ensure precise compatibility with existing assemblies and prompt dispatch from Emmerich Technical Data Article number: 4000833027NW SKU: 4000833027NW Product type: Clamping bar Type: Fork design Brand: AMF Data Slot width: 18 mm Overall length: 200 mm Suitable for clamping screws: M16, M18 Packaging unit: 1 Axite enrichment: A: 30; B2: 48; B3: 15; B4: 8 Special features Conforms to DIN 6315B Fork execution for positive engagement Designed for use with tension/clamping screws M16 and M18 FAQ What standard does the clamping bar follow and why is this important? The clamping bar follows DIN 6315B, which guarantees standardised mounting dimensions and compatibility with fixtures and accessories designed to the same norm. Can the fork clamping bar be used with both M16 and M18 screws? Yes, the fork configuration is dimensioned for secure engagement with M16 and M18 clamping screws, allowing flexible use across common workshop fittings. Is the 200 mm length suitable for recessed clamping points? The 200 mm overall length provides additional reach for recessed or hard‑to‑access clamping locations, improving accessibility without major fixture alterations. How is the component supplied and identified for reordering? The item is supplied as a single unit (packaging unit 1) and can be reordered using the article number 4000833027NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Stud Bolt DIN 6379 M16 Heat Treated 8.8 - AMF
Robust fastenings meet consistent quality: the stud bolt combines DIN 6379 compliance with heat treatment to property class 8.8, and a standard M16 thread at 200 mm overall length to deliver reliable tensile performance and repeatable assembly results. Order the item directly via Metav Werkzeuge or consult Metav's advisers for supply and batch planning. AMF stud bolt DIN 6379 — M16 x 200 mm, quenched and tempered to 8.8 A AMF stud bolt DIN 6379 M16 x 200 mm, designed for secure mechanical assemblies where standardised dimensions and elevated strength are required. DIN 6379 standardised design Heat-treated to property class 8.8 M16 thread for standard assemblies 200 mm overall length Consistent mechanical performance for standard assemblies The stud bolt is made to the DIN 6379 specification and offers a predictable geometry for flange and coupling connections. The combination of a standard M16 thread and 200 mm overall length enables straightforward integration into established fastening concepts, reducing set-up time and ensuring interchangeability. The component's repeatable dimensions support process stability in production and maintenance tasks, providing measurable benefits for mechanical consistency and assembly efficiency. Heat treatment and what property class 8.8 delivers Heat treatment described as quenched and tempered results in the declared property class 8.8, which balances tensile strength with ductility for dependable load-bearing behaviour. This treatment increases resistance to static and dynamic stresses compared with untreated fasteners while maintaining machinability for final adjustments. The result is a robust fastener suitable for applications demanding elevated mechanical reliability without resorting to specialised high-alloy solutions. Practical handling and installation advantages in the workshop With a nominal width 19 mm and a standard metric thread, the stud allows use with common wrenches, nuts and washers, simplifying tooling and inventory requirements. The product's standardisation reduces the need for special components and supports efficient replenishment cycles from central stock. Where traceability is required, the item can be referenced by its article number for quality records and procurement planning, contributing to streamlined workshop logistics and reduced downtime. Discuss batch supply and technical options for the AMF stud bolt with Metav Werkzeuge’s specialists in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833276NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Label: Stiftschraube DIN6379 M16x200mm vergütet auf 8.8 AMF Core measurements Thread: M16 Overall length: 200 mm Width: 19 mm Packaging unit: 1 Special features Heat treatment: quenched and tempered to property class 8.8 Standard compliance: DIN 6379 Axite enrichment: Addition: b: 122 FAQ What standard does this stud bolt conform to? The item conforms to DIN 6379, ensuring standardised dimensions and fit for typical mechanical and structural connections. Which thread and length are specified for the fastener? The fastener is supplied as an M16 thread with a 200 mm overall length, matching conventional metric assembly requirements. What does property class 8.8 indicate for this fastener? Property class 8.8 denotes that the stud bolt has undergone heat treatment (quenched and tempered) to provide enhanced tensile performance and reliable load-bearing characteristics. Is the stud suitable for standard workshop tooling? Yes; the nominal width 19 mm and metric thread make the component compatible with commonly available wrenches, nuts and washers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Stud Bolt M20x200 Quenched Grade 8.8, DIN 6379 - AMF
Take advantage of a high‑strength stud bolt that meets DIN 6379, with an M20 thread and an overall length of 200 mm, for dependable mechanical fastening; order the part directly via Metav Werkzeuge or consult the technical team for application advice. AMF Stiftschraube DIN 6379 – Stud bolt M20 x 200 mm, property class 8.8 The AMF Stiftschraube DIN6379 M20x200mm is a heat‑treated stud bolt designed for secure fastening in industrial and workshop assemblies. DIN 6379 conforming stud bolt Heat-treated to property class 8.8 Thread M20 for standard fittings Overall length 200 mm Reliable fastening for demanding assemblies A stud bolt manufactured to an established metric standard delivers consistent clamping and repeatable performance. The compliance with DIN 6379 ensures dimensional accuracy and interchangeability with standard nuts and threaded components, reducing assembly time and the risk of mismatched parts. Specifying a stud with defined mechanical properties supports predictable joint behaviour under load, which in turn helps to minimise unscheduled downtime and keeps production flows steady. Clear specification for confident selection Key specification data such as M20 thread and 200 mm overall length make selection straightforward when matching to flanges, housings or repair parts in mechanical systems. The marking of property class 8.8 indicates that the fastener has been heat‑treated to provide elevated strength compared with standard grade fasteners; this attribute is important when higher clamping forces or fatigue resistance are required. Where necessary, refer to the relevant engineering tables or DIN documentation for pitch and torque guidance to ensure secure installation. Practical fit and installation guidance for workshop use For routine workshop and industrial use, this stud bolt works well in assemblies that demand a robust metric connection and consistent geometry. When installing, ensure correct thread engagement and use appropriate locking measures to maintain joint integrity over time. The product’s standardised dimensions facilitate inventory management and simplify maintenance planning, enabling rapid replacement during service operations and supporting efficient workshop workflows. For specification confirmation or application support for the AMF stud bolt, contact Metav Werkzeuge’s technical advisors in Emmerich at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 4000833285NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Facts Thread: M20 Overall length: 200 mm Width: 27 mm Special features Heat-treated to property class 8.8 Packaging unit: 1 Label: Stiftschraube DIN6379 M20x200mm vergütet auf 8.8 AMF Axite enrichment: Addition: b: 122 FAQ What standard does this stud bolt conform to? The stud bolt is manufactured to DIN 6379, as stated on the product label for reliable dimensional and thread conformity. What do the markings ‘M20’ and ‘200 mm’ mean for selection? They denote a metric M20 thread and an overall length of 200 mm, which define compatibility with standard nuts and mounting depths for mechanical assemblies. What does property class 8.8 indicate about strength? Property class 8.8 describes the heat‑treated condition and mechanical strength level of the fastener, signifying higher tensile and yield performance compared with lower classes. How is the item identified for ordering? Order using the SKU 4000833285NW and refer to the product label description to ensure the correct AMF stud bolt is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Stud Bolt M24x200 Heat-Treated Grade 8.8, DIN 6379 - AMF
Take advantage of a standardised fastener that combines DIN 6379 conformity, a robust M24 thread and quenched and tempered 8.8 material properties for secure, repeatable assembly performance. Order the AMF stud bolt directly via Metav Werkzeuge or ask our consultants if additional data is required. AMF stud bolt DIN 6379, M24 x 200 mm, property class 8.8 A AMF stud bolt DIN 6379 M24 x 200 mm designed for reliable mechanical fastening in industrial assembly, maintenance and plant construction applications. DIN 6379 compliant Thread dimension M24 Overall length 200 mm Tempered to property class 8.8 Consistent clamping and industrial interchangeability The stud bolt is manufactured to DIN 6379, ensuring consistent dimensional accuracy and interchangeability in production and repair environments. Compliance with this standard simplifies procurement and assembly planning by aligning with widely accepted metric fastening specifications. The component’s quenched and tempered 8.8 designation indicates a medium-high strength class, delivering dependable clamp load for structural joints while maintaining good toughness for general industrial use. Precise thread and length for deep-installation tasks Equipped with a coarse M24 thread and an overall length of 200 mm, the fastener suits deeper thread engagements and multi-layer joints. The supplied data also indicates a thread length b: 122 mm, which supports extended engagement where longer threaded overlap is required. Accurate thread form and size mean predictable torque-to-tension behaviour and easier selection of appropriate nuts and washers, reducing rework and improving assembly efficiency. Application scope, handling and quality assurance This stud bolt is aimed at plant builders, maintenance technicians and mechanical assemblers who require a standardised, heat-treated fastener for robust connections. Supplied as a single unit, the part is ready for immediate installation and is appropriate for structural and equipment fastening where an 8.8 property class is specified. For any uncertainty about fitment or compatibility with a specific machine or construction detail, Metav Werkzeuge’s technical advisers can provide comparative data and guidance to ensure the correct choice for each application. For supply and technical advice on AMF stud bolts, contact Metav Werkzeuge in Emmerich — request application guidance or delivery information by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833297NW SKU: 4000833297NW Product type: Stud bolt (Stiftschraube) Standard: DIN 6379 Label: Stiftschraube DIN6379 M24x200mm vergütet auf 8.8 AMF Facts Thread: M24 Overall length: 200 mm Width: 35 mm Thread length b: 122 mm Packaging unit: 1 Special features Quenched and tempered to property class 8.8 Metric coarse thread for mechanical assemblies Suitable for standard industrial fastening tasks FAQ What standard does this stud bolt comply with? The stud bolt is manufactured to DIN 6379, which defines the dimensional and thread characteristics for this type of metric stud. What are the key dimensions of the fastener? Key dimensions include M24 thread, 200 mm overall length and a thread length b: 122 mm, as specified for this item. What does property class 8.8 mean for application? Property class 8.8 indicates a quenched and tempered fastener with medium-high tensile strength, suitable for many structural and machinery connections where a reliable clamp force is required. Is the stud bolt supplied individually or in bulk? This item is supplied in a packaging unit of 1, ready for immediate installation. Can this fastener be used in structural steel assemblies? Yes, the combination of DIN 6379 conformity and 8.8 heat treatment makes the fastener appropriate for standard structural and equipment fastening, subject to project-specific specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm T-Slot Bolt M16 With Nut And Washer, DIN 787 - AMF
Take advantage of a robust, DIN‑compliant clamping solution that combines Grade 8.8 strength with an M16 thread and a 200 mm overall length for secure fixture retention in 18 mm T‑slots; order the assembly through Metav Werkzeuge or contact our specialists for compatibility advice. AMF T-slot bolt DIN 787 — M16 x 200 mm for 18 mm T-slot, Grade 8.8 A T-slot bolt by AMF for use in 18 mm machine table T‑slots, supplied complete with nut and washer for reliable clamping and straightforward installation DIN 787 compliant design Grade 8.8 high-tensile steel Fits 18 mm T-slots Supplied with nut and washer M16 thread, 200 mm overall length Reliable clamping performance for fixtures and tooling The DIN‑specified design ensures a predictable mechanical interface: compatibility with DIN 787 means the bolt aligns with common machine table tolerances and fixture systems, while the M16 thread gives a secure threaded engagement for standard clamping hardware. Manufactured to a Grade 8.8 classification, the connector offers a balance of tensile strength and ductility suitable for general workshop and industrial jigs, reducing the risk of slippage under load and supporting consistent setup repeatability. Precise fit and clear dimensional data for selection Detailed dimensional information supports quick selection and reduces trial‑and‑error. The assembly is intended for an 18 mm T‑slot and includes clear axial enrichment values (A: 17.7 mm; B: 125 mm; E: 28 mm; K: 10 mm) to confirm head and engagement geometry against existing fixtures. Supplied as a complete set with nut and washer, the component removes the need to source mating parts separately and simplifies inventory management on the shop floor, enabling faster cycle times during clamping operations. Built for workshop durability and dependable supply Engineered for repeated use in demanding environments, the bolt’s specification supports routine machining and fixturing tasks while offering long‑term serviceability. The combination of a standardised norm, robust thread form and included mounting hardware provides practical advantages: reduced setup time, lower risk of incompatible parts and predictable replacement intervals. Sourced via Metav Werkzeuge, the product benefits from an established European supply chain and quality control practices that help maintain a reliable parts stream for production and maintenance teams. For secure, DIN‑compliant clamping solutions, request a supply consultation from Metav Werkzeuge to confirm fit and delivery for the AMF T‑slot bolt (SKU 4000833341NW) and ensure seamless integration with existing machine tables Technical data SKU: 4000833341NW Label: T‑Nutenschraube DIN 787 T‑Nut 18mm M16 L.200mm Güte 8.8 m.Mutter u.Scheibe AMF Product type: T‑slot bolt Brand: AMF Norm: DIN 787 Dimensions & core data Thread: M16 Overall length: 200 mm T‑slot width: 18 mm Axial additions: A: 17.7 mm; B: 125 mm; E: 28 mm; K: 10 mm Packaging unit: 1 Special features Grade 8.8 high‑tensile classification Supplied with nut and washer Axial enrichment values included Suitable for standard machine T‑slots FAQ Is this bolt suitable for standard 18 mm machine table T‑slots? Yes. The AMF T‑slot bolt is designed specifically for an 18 mm T‑slot and conforms to DIN 787 to match common machine table specifications. What does Grade 8.8 indicate for this fastening element? Grade 8.8 denotes a high‑tensile steel classification that balances strength and ductility, offering dependable clamping performance for fixtures and general workshop applications. Does the delivery include all required fixing parts? The product is supplied complete with nut and washer as indicated in the product description, simplifying installation and spare‑part management. What are the axial enrichment values and why do they matter? The axial enrichment values (A: 17.7 mm; B: 125 mm; E: 28 mm; K: 10 mm) define head and engagement geometry; these dimensions aid in confirming clearance, head seating and thread engagement with existing fixtures. Is the bolt compatible with metric M16 clamping accessories? Yes, the M16 thread is a standard metric size and is compatible with typical M16 nuts and clamping accessories used in workshop fixturing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm T-Slot Bolt M24 28mm T-Slot, Grade 8.8 DIN 787 - AMF
Take advantage of the standardised design and high tensile property class to ensure reliable clamping in machine tables; the combination of DIN 787 compliance and an M24 thread provides straightforward interchangeability and robustness — order directly via Metav Werkzeuge or consult the technical team for application advice. T-slot screw DIN 787 – 28 mm T-slot, M24 thread (AMF) The T-slot screw DIN 787 is a high-strength fastening solution for 28 mm T-slots, intended for machine tables, fixtures and heavy-duty clamping applications. DIN 787 standardised design Fits 28 mm T-slots M24 metric thread Grade 8.8 strength, 200 mm length Reliable standard conformity for seamless integration Compliance with DIN 787 ensures predictable dimensions and compatibility with industry-standard T-slot systems, which simplifies machine set-up and interchange of clamping elements. The standardised profile reduces measurement and fitting time during fixture changes and supports consistency across multiple workstations. As a result, downtime is minimised and procurement becomes more efficient, since replacement parts conform to an established European norm. High-strength performance and secure clamping The Grade 8.8 property class and the M24 metric thread deliver a robust combination of tensile strength and reliable torque transmission, suitable for heavy clamping forces on machine tables and modular fixturing. With a 200 mm overall length the fastener allows deeper engagement where extended bite is required. The coarse M24 thread supports strong preload while remaining serviceable with standard tooling, helping to keep maintenance straightforward and predictable. Practical fit and application guidance for workshop use Designed for a 28 mm T-slot and specified with precise axial dimensions (A: 27.7, B: 125, E: 44, K: 18), the component offers a secure seating and correct alignment in slot-mounted assemblies. Packaged per unit, the fastener is suited to single-component replacements or staged upgrades of clamping systems. Selection should match slot width and fixture geometry; when in doubt, consult the technical data to confirm compatibility with the machine table and clamping hardware being used. Contact Metav Werkzeuge for precise ordering and application support: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery from Emmerich Technical data Article number: 4000603258NW SKU / UID: 4000603258NW Standard: DIN 787 Product type: T-slot screw Brand: AMF Facts T-slot width: 28 mm Thread: M24 Overall length: 200 mm Property class: 8.8 A: 27.7 B: 125 E: 44 K: 18 Packaging unit: 1 Special features Designed for machine tables and fixturing Standardised dimensions for interchangeability Heavy-duty fastening for clamping applications FAQ Is this fastener compatible with standard 28 mm T-slots? Yes. The T-slot screw DIN 787 (AMF) is specified for 28 mm T-slots and includes axial dimensions to ensure correct seating in standard slot systems. What does Grade 8.8 indicate for the screw? Grade 8.8 denotes a high-strength property class; the T-slot screw by AMF provides enhanced tensile and yield performance suitable for demanding clamping tasks. Can the fastener be used on modular fixture plates with deeper threaded engagement? Yes. The 200 mm overall length allows deeper engagement where required; consideration of thread engagement depth and slot clearance is recommended before installation. Which thread size is used and what tooling is needed? The component features an M24 metric thread; standard M24 tooling and torque practices for Grade 8.8 fasteners apply for installation and removal. What is the article number for ordering and reference? The article number is 4000603258NW (T-slot screw DIN 787, AMF), which should be quoted for precise procurement and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm T-Slot Screw 22mm M20 DIN 787 Grade 8.8 - AMF
Take advantage of the combination of standardised fit, robust tensile performance and straightforward installation for reliable clamping in production setups; order the part directly via Metav Werkzeuge or contact our consultants for specification support. AMF T-slot bolt DIN 787 — 22 mm T-slot, M20, 200 mm, Grade 8.8 AMF T-slot bolt DIN 787 is a heavy-duty clamping element for 22 mm T-slots, designed for secure fixture assembly and machine-table fastening in industrial environments. Compliant with DIN 787 Fits 22 mm T-slots M20 thread, 200 mm length Grade 8.8 high tensile strength Secure clamping performance for machine tables The bolt provides a reliable mechanical interface for machine tables and modular fixturing thanks to its compatibility with 22 mm T-slots and an M20 threaded connection. These properties ensure a consistent and repeatable clamping action, which reduces setup time and minimises micro-movement under load. The overall length of 200 mm gives sufficient thread engagement for deep assemblies, while the standardised head geometry is intended to sit securely within the slot profile, improving positional stability during machining and assembly operations. Standardised fit for seamless interchangeability Manufactured to DIN 787, the component offers a predictable fit and geometry that simplifies parts replacement and system integration. The adherence to this norm means the head dimensions and slot interface are compatible with other DIN-conformant accessories, enabling quick interchange without bespoke adapters. For procurement and maintenance planning, the use of standardised elements reduces the risk of mismatches and supports consistent inventory management across workshops and production lines. Strength and durability suitable for demanding applications Specified as Grade 8.8, the fastener delivers elevated tensile and yield characteristics compared with lower-grade alternatives. This classification indicates enhanced resistance to shear and bending stresses encountered in heavy clamping scenarios, making the bolt suitable for medium to high-load fixtures. Where cyclic loads or vibration are present, selecting a high-tensile fastener like this reduces the likelihood of deformation and contributes to longer service intervals and fewer unplanned stoppages. Interface details and dimensional guidance Key interface dimensions are provided to aid design and assembly: additional dimensional values are A: 21.7 mm, B: 125 mm, E: 35 mm, K: 14 mm, which describe the head and engagement geometry for integration into standard clamping systems. These measured parameters support designers and engineers in verifying clearance, reach and engagement depth when planning fixture layouts or retrofitting new components into existing equipment. Practical installation and system compatibility The threaded M20 connection accepts widely available nuts and washers, allowing standard fastening practices to be applied. The fastener's design supports straightforward installation: insert into the 22 mm slot, align with the workpiece or clamp element, and secure using appropriate torque values for Grade 8.8 hardware. Where required, confirm torque and assembly procedures with tool manufacturers to ensure clamping force is consistent and safe for the application. Specification support and procurement assurance For procurement teams and workshop managers, the use of standardised, robust fasteners simplifies sourcing and reduces the variety of parts to be stocked. Metav’s role as a precision partner ensures that components are supplied reliably from the Emmerich hub, with quality controls aimed at delivering consistent product performance and traceable deliveries for production-critical hardware. For reliable supply of AMF Grade 8.8 T-slot bolts and expert advice on integrating them into existing fixtures, contact Metav Werkzeuge for immediate assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000603245NW SKU: 4000603245NW Standard: DIN 787 Core measurements T-slot width: 22 mm Thread: M20 Overall length: 200 mm Grade: 8.8 Additional dimensions: A 21.7 mm, B 125 mm, E 35 mm, K 14 mm Features Product type: T-slot bolt Brand: AMF Packaging unit: 1 FAQ What slot size does the bolt fit? The bolt is designed for a 22 mm T-slot, providing a standardised fit for compatible machine tables and fixtures. Which thread and length are specified for this T-slot bolt? This fastening element has an M20 thread and an overall length of 200 mm, suitable for assemblies requiring extended engagement. Is the bolt manufactured to any recognised standard? Yes, the bolt conforms to DIN 787, ensuring standard head geometry and interchangeability with other DIN-compliant components. What does Grade 8.8 mean for performance? Grade 8.8 indicates elevated tensile strength and yield properties, making the bolt suitable for demanding clamping scenarios where higher load resistance is required. How can engineers verify dimensional compatibility? Use the provided dimensions A 21.7 mm, B 125 mm, E 35 mm and K 14 mm to confirm head and engagement geometry against fixture drawings and slot profiles. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm T-Slot Screw M20 With Nut And Washer, DIN 787 8.8 - AMF
Take advantage of a robust fastener that combines DIN 787 compliance with Grade 8.8 strength and a 200 mm reach for reliable fixturing; order directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot screw DIN 787 — M20 thread, 200 mm, Grade 8.8 AMF T-slot screw DIN 787 for secure clamping in 20 mm T-slots, supplied complete with nut and washer for machine tables and fixture systems Conforms to DIN 787 T-slot standard Designed for 20 mm T-slot systems High-strength Grade 8.8 construction Supplied with nut and washer Secure clamping through standard compliance The DIN 787 specification guarantees standardised geometry for T-slot fasteners, enabling predictable assembly and interchangeability across machines and fixture plates. By meeting this norm, the M20 threaded fastener provides a verified interface that reduces alignment issues and speeds up setup. The standardised form also simplifies procurement and stock management in production environments, allowing planners to rely on consistent fit and function. Size and reach tailored for demanding fixtures With a 200 mm overall length and compatibility with a 20 mm T-slot, the screw is engineered to reach through thicker plates and clamping stacks while maintaining a secure thread engagement. The combination of M20 thread and extended shank length enables deeper clamping and flexibility in fixture design. Dimension references (A: 19.7; B: 125; E: 32; K: 12) support precise integration into assemblies and help machine planners verify clearances and gripping depths before installation. Proven strength for industrial use Constructed to Grade 8.8, the fastener delivers a balance of tensile strength and toughness suitable for heavy clamping applications. This property class indicates quenched and tempered steel performance levels commonly used in workshop and production settings to resist shear and tensile loads. The result is a dependable connection that maintains clamping force under cyclical loads, contributing directly to process stability and reduced rework. Ready-to-install delivery reduces assembly time Delivered complete with nut and washer, the fastener removes the need to source matching components separately, shortening the assembly chain and simplifying logistics. Packaged as a single unit, the product supports just-in-time workflows and minimises inventory complexity. The supplied fixing elements are matched to the thread size to ensure correct fit and reliable torque transmission during tightening. For reliable fixturing with AMF’s high-strength T-slot fastener, contact Metav Werkzeuge for ordering and bespoke advice — Metav Werkzeuge can confirm suitability for specific machine tables and provide delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833347NW SKU / UID: 4000833347NW Standard: DIN 787 Product type: T-slot screw Brand: AMF Thread: M20 T-slot width: 20 mm Total length: 200 mm Grade: 8.8 Includes: nut and washer Packaging unit: 1 Facts Thread size: M20 T-slot compatibility: 20 mm Overall length: 200 mm Dimension A: 19.7 Dimension B: 125 Dimension E: 32 Dimension K: 12 Standard: DIN 787 Special features Conforms to DIN 787 T-slot geometry High-strength Grade 8.8 fastener Supplied complete with matched nut and washer Suitable for machine tables and fixture systems FAQ What T-slot width is this fastener suitable for? The AMF T-slot screw is designed for a 20 mm T-slot, matching the DIN 787 profile for secure seating in standard machine table grooves. Does the delivery include fixing hardware? Yes, the product is supplied with a matched nut and washer, allowing immediate installation without sourcing additional components. What is the thread size and overall length of the fastener? The fastener features an M20 thread and an overall length of 200 mm, suitable for deeper clamping applications. Which standard does the screw comply with? This T-slot screw conforms to DIN 787, ensuring standardised geometry for compatibility across machines and fixtures. Can the SKU be used to order the exact item? Orders and enquiries can reference SKU 4000833347NW to ensure the correct AMF T-slot screw is supplied. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Clamping Shim Set 20pcs Universal H22-H208 - AMF
Take advantage of the combination of universal compatibility and a wide height range (H 22–208 mm) for faster, more accurate set-ups; order the AMF clamping shim set directly via Metav Werkzeuge or ask our consultants for technical advice. Clamping shim set No. 6500H – universal, adjustable heights, AMF The Clamping shim set No. 6500H is a universal accessory for fine height adjustment and dependable workholding in machining, fixture assembly and workshop set-ups. Universal clamping shim set, versatile for fixtures Height range H 22–208 mm for flexible stacking Compatible with standard clamping systems Repeatable alignment for production environments Precise height control reduces setup iterations The set is designed to provide precise incremental adjustments across a broad height range, enabling accurate alignment without time-consuming rework. With an effective H 22–208 mm span, the shims permit stepwise correction where minute height differences matter; this reduces the need for re-machining or improvised packing. In practice, the collection of stackable shims supports consistent repeatability in successive set-ups, which improves process reliability and reduces downstream quality checks. Flexible compatibility for various clamping arrangements Thanks to its universal concept, the collection works with common clamping elements and fixture plates typically used in production and toolroom environments. The multi-piece arrangement allows incremental adjustment instead of modifying workpieces or fixtures, so components can be centred and secured quickly. For procurement and planning, this means fewer bespoke parts and a versatile inventory item that adapts across jobs — a practical choice for workshops that handle diverse materials and workpiece geometries. Easier organisation, faster throughput Organising the shims as a ready set simplifies daily handling and shortens machine downtime during changeovers. The multi-piece set supports stepwise stacking for micrometric corrections and helps maintain consistent clamping geometry during repetitive runs. This benefit translates into reduced set-up time and lower scrap rates, delivering a measurable operational advantage in both single-shift and continuous production scenarios. For dependable, repeatable set-ups choose the AMF No. 6500H clamping shim set — contact Metav Werkzeuge for tailored advice and quick supply from Emmerich (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Article number: 4000833088NW Type: Nr. 6500H Name: Clamping shim set No. 6500H, universal AMF Manufacturer: AMF Packaging unit: 1 UID: 4000833088NW Data H min.: 22 mm H max.: 208 mm Special features Clamping shim set (universal) Multi-piece set: 20 pieces Brand: AMF FAQ What is the adjustable height range of the set? The AMF clamping shim set No. 6500H provides a height range from H 22 mm to H 208 mm, allowing fine incremental adjustments for accurate workpiece positioning (SKU 4000833088NW). Can the shims be used with standard clamping systems? Yes, the set is designed as a universal collection compatible with typical clamping elements and fixture plates used in machining and assembly. How does the multi-piece design benefit set-up work? The multi-piece arrangement enables incremental stacking for micrometric height correction, so fixtures can be adjusted without permanent modification — improving throughput and reducing rework. Is the set suitable for precision fixture work? The No. 6500H collection supports precise alignment and repeatable clamping geometry, making it appropriate for precision fixture building and maintenance tasks in production environments. How many pieces are included in the set? The AMF No. 6500H set consists of 20 pieces as indicated in the product description (SKU 4000833088NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm T-Slot Nut 18mm M16 High Strength Class 10, DIN 508 - AMF
Take advantage of a DIN 508‑compliant design and M16 thread compatibility for reliable fixture assembly; the compact 20 mm height and 18 mm T‑slot fit make this T‑slot nut an efficient choice for standard clamping operations. Order the part directly via Metav Werkzeuge or consult the team for application guidance. T‑Nut 18mm M16 AMF — T‑slot nut for 18 mm T‑slots with M16 thread T‑Nut 18mm M16 AMF provides standardised fixation for clamping and fixturing in 18 mm T‑slot systems, engineered for repeatable engagement and predictable load transmission. Standard‑compliant DIN 508 Fits 18 mm T‑slots M16 internal thread Strength class 10 Consistent clamping performance for repetitive fixturing The component is designed to match the geometric requirements of DIN 508, which ensures a predictable fit in corresponding machine table grooves. This standardisation reduces setup variability and speeds up fixture changeovers, delivering measurable efficiency in production environments. The compact 20 mm height and form factors listed in the technical data contribute to stable seating and help to maintain alignment under clamping loads. Secure load transfer with M16 fastening Featuring an M16 thread, the nut mates with commonly used metric fasteners to provide robust clamping capacity. The combination of the thread size and the noted strength class 10 supports higher preload values where required, making the component suitable for medium‑duty to heavy‑duty applications in jigs, fixtures and workholding assemblies. The threaded interface is intended for straightforward use with standard bolts and threaded studs, simplifying maintenance of clamping systems. Direct compatibility with 18 mm T‑slot systems The geometry matches an 18 mm T‑slot profile, allowing the nut to slide into the slot and locate reliably along the table. This makes the part useful for modular fixturing where frequent repositioning is needed. The design parameters identified in the technical data (A, E, K dimensions) describe the engagement geometry and support predictable interaction with T‑slot rails and securing elements, which is critical for repeatable machining set‑ups. Workshop logistics and integration benefits With a single‑piece design and a packaging unit: 1, the component is easy to stock and issue for one‑off repairs or for fitting into existing sets of clamping hardware. The standard conformity and clear specification reduce the need for measurements on arrival and simplify procurement decisions. For purchasing managers seeking reliable supply and a consistent quality filter for the European market, Metav’s distribution and stock handling provide transparent order fulfilment from Emmerich. Contact Metav Werkzeuge for tailored advice on selection and availability of AMF T‑slot nuts, or request further technical clarification by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833207NW Label: T‑Nutenstein DIN 508 T‑Nut 18mm M16 AMF Manufacturer: AMF Product type: T‑slot nut Facts Height: 20 mm T‑slot width: 18 mm Thread size: M16 Strength class: 10 A: 17.7 mm E: 28 mm K: 10 mm Packaging unit: 1 Special features Conforms to DIN 508 Suitable for clamping and fixturing in 18 mm T‑slots Compatible with standard M16 fasteners SKU/UID: 4000833207NW FAQ What slot size is this nut intended for? The nut is designed for an 18 mm T‑slot, providing standard engagement geometry for that slot width. Which thread does the nut accept? The component accepts an M16 fastener thread, compatible with commonly used metric bolts and studs. Is the nut specified to any standard? Yes, the design conforms to DIN 508, ensuring predictable fit and interchangeability in compliant T‑slot systems. What is the height of the nut and why does it matter? The nut has a height of 20 mm, which affects the seating depth and clearance in the slot and contributes to stable clamping. What strength class is indicated for this part? The data lists strength class 10, supporting higher preload and reliable load transfer for demanding clamping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm T-Slot Nut M16 DIN 508 24mm Height, Strength Class 10 - AMF
The combination of DIN 508 conformity, a 20 mm T-slot fit and an M16 internal thread ensures reliable, standardised clamping for machine tables and fixtures; pairing these features with the strength class 10 rating supports demanding workshop applications. Order directly via Metav Werkzeuge or consult the specialists for tailored advice. AMF T-slot nut (DIN 508) — 20 mm, M16 thread The T-slot nut (DIN 508) AMF is a workshop-grade fastening element for secure fixture assembly in 20 mm T-slots on machine tables and extrusion profiles. DIN 508 standard compliance Fits 20 mm T-slots M16 internal thread Strength class 10 Consistent, standardised clamping that saves setup time The DIN 508 conformity guarantees interchangeability across compatible fixtures and table systems, simplifying procurement and reducing downtime. Using a standard T-slot insert that matches the 20 mm slot dimension avoids trial-and-error matching and enables quick replacement during retooling. This leads to shorter set-up times and predictable clamping behaviour, which benefits production planning and repeatable processes. Robust thread and load capability for secure joins With an M16 internal thread and a strength class 10 rating, the component provides a high-capacity threaded interface for clamping bolts and studs. The robust thread dimension allows the use of common metric fasteners, giving flexibility in selecting bolt grades and lengths suitable for the application. Such mechanical characteristics translate into dependable clamping force and stable fixturing under machining or assembly loads. Clear dimensions and workshop practicality Key dimensional values (for example A: 19.7, E: 32, K: 12, height: 24) permit straightforward integration into existing fixtures and CAD setups without guesswork. The compact geometry of the insert supports tight packing in multi-fixture arrangements and enables precise positioning along a T-slot. The simple form factor makes handling, inspection and inventorying easy for workshop staff and reduces the risk of fitting errors. Compatibility and procurement advantages Selecting a component that adheres to a recognised standard removes uncertainty in cross-sourcing and maintenance. The standardised design of this T-slot insert supports compatibility with a broad range of clamping systems and profile suppliers, facilitating smoother supply-chain decisions. Where exact specifications are critical, the listed numerical attributes allow rapid verification against technical drawings. For procurement or technical clarification on the AMF T-slot nut, contact Metav Werkzeuge for expert guidance and immediate order processing Technical data Article number: 4000833208NW Product: T-slot nut Manufacturer: AMF Facts T-slot width: 20 mm Thread: M16 Height: 24 mm A: 19.7 E: 32 K: 12 Strength class: 10 Packing unit: 1 Standard: DIN 508 Special features DIN 508 standardised form Designed for machine table T-slots Internal metric thread for common bolts Compact geometry for dense fixtures FAQ What slot size is the nut designed for? The nut is designed for a 20 mm T-slot and matches standard 20 mm profile systems and machine table grooves. Which thread size fits this T-slot nut? This T-slot insert features an M16 internal thread suitable for M16 bolts and studs. Is the nut compliant with any standards? Yes, the component conforms to DIN 508, ensuring interchangeability with other standardised T-slot hardware. What is the strength rating of the part? The item is specified with strength class 10, indicating a high-capacity threaded connection for demanding fixtures. What dimensions are available for integration checks? Key dimensions include A: 19.7, E: 32, K: 12 and a height of 24, allowing precise fit verification. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Ball Washer for M20 Screws D1:21 D3:36 H2:6.3 R:27, DIN 6319C - AMF
Take advantage of the DIN‑compliant fit combined with a Ø21 mm bore and clearly defined seating geometry for reliable bolted assemblies — order directly via Metav Werkzeuge or ask the consultants for application support. Spherical washer DIN 6319C by AMF — for M20 screws, bore Ø21 mm The spherical washer DIN 6319C provides a self‑aligning seating surface for hexagon screw connections, engineered for industrial bolted joints where controlled contact geometry and repeatable alignment are required. DIN 6319C standard compliant Bore Ø 21 mm for M20 screws Outer diameter 36 mm, height 6.3 mm Precision radius R 27 mm Reliable standard compliance for secure connections Meeting DIN 6319C ensures consistent seating and repeatable performance in production and maintenance environments. The standardised geometry minimises misalignment between screw head and component, which reduces the risk of uneven clamping forces and subsequent joint loosening. This results in fewer rework cycles and steadier assembly quality across batches, supporting lean production and predictable maintenance intervals. Precise dimensions that speed up assembly The defined bore of Ø21 mm together with an outer diameter of 36 mm and a height of 6.3 mm provides a tight, predictable fit for M20 fastenings. The specified radius R 27 mm aids in distributing contact stresses evenly, lowering the likelihood of surface indentation or component distortion. Such dimensional clarity simplifies fixture planning and reduces the time spent checking tolerances during installation. Improved joint performance through controlled seating A spherical seating element with correct geometry helps the bolted joint accommodate minor angular deviations without imposing additional bending moments on the screw. The result is a more uniform clamping force and improved fatigue behaviour in cyclic loads. For applications that demand stability under vibration or variable loads, this component supports longer service life and lowers the probability of unscheduled downtime. Practical advantages for workshops and industrial users Supplied by AMF and packaged per unit, the part is suited to both repair shops and production lines that require single‑piece ordering for bespoke maintenance tasks. The compact design and familiar standard make it straightforward to stock as a spare part, while the clearly documented dimensions facilitate integration into inventory systems and CAD libraries. Procurement and supply continuity for professionals The component is identified by SKU 4000833461NW and is available through Metav’s procurement channels; selecting standardised parts like this spherical seating washer simplifies logistics and reduces supplier complexity. Professional purchasers benefit from predictable availability and the documentation necessary for quality management and traceability. Contact Metav Werkzeuge for AMF components and expert guidance on dimensional suitability and stocking strategies — the Metav team provides application advice and reliable supply from Emmerich. Technical data Article number: 4000833461NW Standard: DIN 6319C Type: Spherical washer Facts Bore diameter D1: 21 mm Outer diameter D3: 36 mm Height H2: 6.3 mm Radius R: 27 Packaging unit: 1 Special features Compatible with M20 screws Brand: AMF Label: Spherical washer for M20, bore Ø21 mm FAQ Is this washer suitable for M20 screw connections? Yes. The spherical washer is specified for use with M20 screws and features a Ø21 mm bore for correct fit. Which standard does the component comply with? The part complies with DIN 6319C, ensuring standardised seating geometry and repeatable assembly characteristics. What are the key dimensions to check for installation? Key dimensions are the bore Ø21 mm, outer diameter 36 mm and height 6.3 mm; these determine compatibility with mating parts. Can this washer reduce joint loosening under vibration? Yes. The washer’s spherical seating and radius R 27 mm help distribute loads evenly, improving clamping uniformity and resistance to loosening. How is the part identified for ordering and stock control? The article is listed under SKU 4000833461NW and described as a spherical washer to DIN 6319C for M20. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Hexagon Nut DIN 6331 M14 Machined Faces Strength Class 10 - AMF
Take advantage of the combination of DIN 6331 standardisation, strength class 10 reliability and precise dimensions for consistent, high‑force clamping in production. Order the AMF hexagon nut directly via Metav Werkzeuge or consult our specialists for specification support. Hexagon nut DIN 6331 M14 – SW 21 mm, strength class 10 (AMF) Hexagon nut DIN 6331 M14 engineered as a high‑strength metric fastening solution for industrial assemblies and machine construction DIN 6331 compliance for interchangeability Strength class 10 for high clamping loads SW 21 hexagon for standard spanners Compact overall height of 21 mm for tight spaces Consistent clamping force for heavy‑duty joints The M14 thread in combination with strength class 10 provides a clear advantage where elevated clamping forces are required. The reinforced material grade behind this classification allows the fastener to transmit higher preload without premature deformation, which directly improves joint reliability in production environments. For engineers and assemblers this means fewer re‑work cycles and a lower risk of joint loosening under dynamic loads, translating into measurable process stability. Standardised form for rapid assembly and serviceability Compliance with DIN 6331 and the standard SW 21 across the hexagon faces ensures compatibility with common tools and automated tightening equipment. The specified overall height 21 mm and corner‑to‑corner dimension 23.4 mm (Eckenmaß) support predictable wrench engagement and torque application. The pressed and milled manufacturing method yields defined contact faces and accurate geometry, which improves torque transfer and reduces the chance of rounding during tightening — a practical benefit for maintenance intervals and in-line assembly. Reduced assembly time and dependable inventory handling Using a standardised hexagon nut like this AMF fastener simplifies procurement and stock management: metric thread designation M14, clear article identification and single‑unit packaging keep logistics straightforward. The compact design supports installation in confined assemblies without compromising load capacity. For operations managers this reduces inventory complexity and supports just‑in‑time workflows while maintaining the required mechanical performance. Contact Metav Werkzeuge for specification advice and secure supply of AMF hexagon nuts in strength class 10 to suit production demands Technical data SKU: 4000833411NW Type: M14 Standard: DIN 6331 Brand: AMF Facts Overall height: 21 mm Spanner width: 21 mm Corner across corners: 23.4 mm Strength class: 10 Packaging unit: 1 Special features Pressed and milled manufacturing Metric thread, hexagon profile Designed for industrial bolted joints Compact design for space‑restricted assemblies FAQ What load capacity can be expected from this nut? The Hexagon nut DIN 6331 M14 (AMF, SKU 4000833411NW) is rated strength class 10, which indicates suitability for high clamping loads in industrial bolted connections when used with appropriate bolts of matching strength. Is the nut compatible with standard spanners and sockets? Yes, the nut features SW 21 across‑flat width, making it compatible with standard spanners and socket tools commonly found in workshops and automated tooling stations; the M14 designation matches standard metric bolts. How does the pressed and milled finish affect assembly? The pressed and milled production results in accurate seating faces and defined hexagon edges, improving torque transfer and reducing the chance of rounding during tightening on the AMF hexagon nut. Can this nut be used in compact assemblies? With an overall height of 21 mm and a compact hexagon profile, the Hexagon nut DIN 6331 M14 is designed for installations where space is limited but reliable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Hexagon Nut M14 DIN 6330B Strength Class 10, Height 21mm - AMF
Reliable fastening for mechanical assemblies is achieved by the M14 thread and strength class 10 combined with a 21 mm spanner width, ensuring consistent clamping force and repeatable installation; order this component directly via Metav Werkzeuge or consult the technical advisors for specification matching. Hexagon nut DIN 6330B M14 — high-strength fastening, 21 mm across-flats (AMF) The Hexagon nut DIN 6330B M14 provides a standardised, high-strength fastening solution for mechanical assemblies, maintenance and machine construction where secure bolted connections are required. Strength class 10 for high clamping force Complies with DIN 6330B standard 21 mm across‑flats for secure wrenching Robust performance for demanding bolted joints The fastener is specified to DIN 6330B and manufactured to deliver reliable mechanical behaviour under load. With a nominal thread of M14 and strength class 10, the component offers superior clamping capacity compared with lower grades, which reduces the risk of loosening in dynamic applications. The standard conformity simplifies selection and quality assurance processes in industrial procurement and supports predictable assembly behaviour in production environments. Precise geometry for correct tool engagement and assembly Measured dimensions such as 21 mm across‑flats and an overall height of 21 mm ensure compatibility with common spanner and socket tools, improving assembly speed and torque transmission. The listed corner width of 23.40 mm provides the geometric context for handling and clearance calculation in tight assemblies. These precise measures make inventory management easier and reduce downtime caused by mismatched tooling or incorrect fastener choices. Simplified sourcing and traceability for workshop supply chains Marked with the AMF designation and the SKU, the component integrates into standard procurement and storage routines. The compact packaging unit (1) is suitable for targeted replacement tasks and small-batch maintenance orders. Clear standardisation, visible on the fastener, supports traceability and documentation in quality systems and helps reduce the administrative overhead when specifying replacement or spare parts for production lines. For technical advice on AMF hexagon nuts or to source DIN 6330B fasteners directly, contact Metav Werkzeuge for expert assistance and reliable supply. Technical data Article number: 4000833396NW UID: 4000833396NW Brand: AMF Product type: Hexagon nut Standard: DIN 6330B Numbers / Core technical data Thread size: M14 Across‑flats (spanner size): 21 mm Overall height: 21 mm Corner width: 23.40 mm Strength class: 10 Packaging unit: 1 Features / Standards Hexagon nut design Strength class 10 indicated DIN 6330B compliance SKU: 4000833396NW Intended for mechanical assembly and maintenance FAQ What does DIN 6330B signify for this fastener? DIN 6330B denotes the dimensional and geometric standard to which the hexagon nut conforms, ensuring that the Hexagon nut DIN 6330B M14 fits and functions with mating parts produced to the same norm. How does strength class 10 affect application? Strength class 10 indicates a high-strength grade; the AMF hexagon nut with this rating provides greater clamping capability than lower classes, making it suitable for joints subject to elevated stresses. Which spanner or socket fits this nut? A 21 mm across‑flats dimension requires a 21 mm spanner or socket for correct torque application to the M14 hexagon nut (SKU 4000833396NW). Is the overall height relevant for installation? Yes, the overall height of 21 mm influences thread engagement depth and clearance calculations; this geometric data assists in specifying compatible bolts and washers for secure assemblies. What is the packaging unit and how is it supplied? The item is supplied in a packaging unit of 1, enabling single-part replacement and controlled procurement for maintenance tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Hexagon Nut M14 SW22 Pressed And Milled Strength Class 10 AMF - AMF
Combine high tensile capacity and precise DIN 6331 geometry for dependable bolted connections; the M14 hexagon nut provides secure clamping with standardised fit and measurable torque behaviour. Order the AMF hexagon nut directly via Metav Werkzeuge or ask the consultants for specification advice. AMF Hexagon Nut M14 (DIN 6331) — SW 22, Strength Class 10, Pressed and Milled The AMF Hexagon Nut M14 (DIN 6331) is a high-strength fastening element designed for industrial assemblies where standard conformity and repeatable clamping force are required. Hexagon nut M14 to DIN 6331 specification Strength class 10 for high clamping loads Spanner width 22 mm, corner size 24.5 mm Pressed and milled finish, overall height 21 mm Engineered for dependable clamping performance The design follows DIN 6331, which guarantees thread and form compatibility with standard bolts and reduces the risk of joint failure in production environments. With strength class 10, the component is rated for elevated tensile and yield limits, so assemblies subject to dynamic or high static loads can be calculated with confidence. The metric M14 thread is a common industrial dimension; its predictable load-bearing behaviour simplifies selection for fixtures and structural joints. This results in fewer rejects and a more stable production process when the correct tightening procedures are applied. Precision geometry that simplifies assembly and maintenance A defined spanner width of 22 mm and a corner size of 24.5 mm ensure consistent engagement with conventional tools, reducing the chance of rounding and tool slippage during torqueing. The pressed and milled finish produces flat seating faces and accurate flank contact, which lowers stress concentrations and improves clamping distribution. The overall height of 21 mm provides sufficient thread engagement for standard bolts, enabling reliable torque transmission while retaining accessibility for maintenance operations. Such geometry is particularly beneficial where reproducible torque is required across multiple joints. Application scope and practical benefits in workshop and industrial use The component is suitable for bolted joints in machines, jigs, and structural assemblies where standardised parts are preferred for interchangeability. Compliance with DIN 6331 facilitates procurement and quality control, since the fastener can be inspected against recognised tolerances. Supplied individually (packaging unit 1), the item is convenient for replacement tasks or small-batch assembly. For customers requiring additional verification, technical documentation and specification checks can be provided to match the nut to bolt grade and application-specific torque charts, supporting safe and efficient engineering decisions. For secure, standard-compliant fastening solutions, rely on AMF components supplied through Metav Werkzeuge — contact the Metav consultants at info@metav-werkzeuge.com or +49 2822 7131930 for specification matching and reliable supply from Emmerich. Technical data Article number: 4000833412NW Product type: Hexagon nut Brand: AMF Facts Thread size: M14 Overall height: 21 mm Spanner width: 22 mm Corner size: 24.5 mm Strength class: 10 Special features Standard: DIN 6331 Finish: pressed and milled Packaging unit: 1 FAQ What load class does this nut meet and why does it matter? The AMF hexagon nut is specified as strength class 10, which indicates higher tensile and yield properties suitable for assemblies subject to elevated clamping forces; this allows safer design margins where stronger bolted joints are required. Is the nut compatible with standard M14 bolts to DIN specifications? Yes, the item conforms to DIN 6331 and is dimensioned for M14 threads, ensuring interchangeability with bolts produced to the same standard. Which spanner size is required for assembly? A spanner width of 22 mm is required; the corresponding corner size is 24.5 mm, which supports secure tool engagement and consistent torque application. How does the pressed and milled finish affect performance? The pressed and milled finish yields accurate seating faces and reduced form deviation, which improves load distribution and lowers the potential for fretting or uneven clamping in long-term service. Can the nut be used for high-vibration applications? Given the strength class 10 rating and precise geometry, the nut is suitable for applications with dynamic loads when combined with the correct bolt grade and appropriate locking methods. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com