Ø 23.2mm Alignment Telescope Phase Contrast, iScope IS.9149 - Euromex
Benefit from precise phase-contrast alignment thanks to the IS.9149’s dedicated fit and compact iScope design. Optimised for repeatable phase centring and quick visual checks, this tool streamlines setup and reduces rework on routine microscopy tasks. Order the alignment telescope directly via Metav Werkzeuge or consult their technical advisers for verification. Phasenzentrierteleskop iScope IS.9149 – Alignment telescope for phase contrast, Ø 23.2 mm tube (Euromex) The Phasenzentrierteleskop iScope IS.9149 is a compact alignment telescope intended to centre phase rings within a 23.2 mm eyepiece tube, supporting reliable phase contrast imaging in laboratory and teaching microscopes. Optimised for phase contrast alignment Ø 23.2 mm tube compatibility Compact iScope design for stability Quick visual verification of centring Precise centring for consistent phase contrast imaging An alignment telescope facilitates exact alignment of the condenser phase ring and objective phase plate, which is essential for clean phase contrast images. The IS.9149 fits microscopes with a Ø 23.2 mm tube and provides a clear optical reference for adjusting the condenser and phase ring position. By using a dedicated centring tool, technicians achieve repeatable alignment without resorting to trial-and-error at the specimen plane, cutting setup time and reducing the risk of imaging artefacts. Faster setup and reduced downtime in routine workflows A simple insertion into the eyepiece tube allows immediate visual inspection of the phase ring position; this straightforward procedure translates into measurable time savings during instrument preparation. The alignment telescope removes uncertainty from the adjustment process, enabling staff to return microscopes to productive use faster and maintain consistent results across shifts. For facilities with multiple instruments, standardising alignment with a centring device supports efficiency and reduces training needs. Robust design appropriate for labs and teaching environments The iScope series places emphasis on compactness and stability, making the accessory suitable for frequent handling in both industrial and educational settings. Although the component is small, its mechanical fit and optical clarity are selected to provide dependable performance under daily use. The construction supports routine visual checks, and the compact format simplifies storage alongside other microscopy accessories. Guidance and further information for confident use If additional clarification of compatibility or alignment technique is required, documentation referenced with the product provides further detail on application and procedure. The alignment telescope is described for phase contrast use and noted to fit the Ø 23.2 mm tube standard; users uncertain about suitability for a particular microscope model can request supplementary technical data. Metav Werkzeuge can supply further specifications or advise on integrating the centring tool into standard operating procedures. For reliable phase contrast alignment, consider the Euromex iScope IS.9149 and contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch via their technical team Technical Data Article number: IS.9149 SKU: IS.9149 Brand: Euromex Model series: iScope Product type: Alignment telescope for phase contrast Facts Tube diameter: Ø 23.2 mm Special features For phase contrast alignment Fits 23.2 mm eyepiece tube iScope series accessory Source: Education PDF p.25; Life Science PDF p.16,42 FAQ How does the alignment telescope improve phase contrast imaging? The alignment telescope enables precise centring of the phase ring relative to the optical axis; using the IS.9149 ensures the phase ring and condenser are aligned so phase contrast effects are rendered correctly. Which eyepiece tube does this accessory fit? The IS.9149 is specified for a Ø 23.2 mm tube and is intended for microscopes that accept that eyepiece standard. Is the IS.9149 suitable for teaching laboratories? Yes, the compact and robust design of the iScope accessory makes it well suited to teaching environments where frequent, quick alignment checks are required. Will the alignment telescope work with all phase contrast objectives? The IS.9149 supports the alignment process for phase contrast objectives by centring the phase ring; compatibility depends on the microscope’s eyepiece tube and phase contrast installation rather than objective brand. Where can additional technical documentation be obtained? Further technical details and application notes referenced in the product documentation are available; Metav Werkzeuge can provide supplementary data or advise on suitability for specific microscope models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø51x60mm HD-Mini Microscope Camera 2 MP 1920x1080 60 fps HDMI Digital 0.37x C-Mount, 32 GB Included - Euromex
Benefit from a compact 2 MP sensor with HDMI output and a C‑Mount 0.37x adapter for immediate Full HD documentation; included 32 GB storage and calibration slide enable rapid deployment. Order the HD‑Mini VC.3023 directly via Metav Werkzeuge or consult our specialists if required. HD‑Mini VC.3023 – Microscope camera with HDMI and Sony CMOS sensor The HD‑Mini VC.3023 is a compact microscope camera engineered for live imaging and documentation in laboratory and inspection environments, offering direct HDMI output and C‑Mount compatibility. HDMI output for direct digital display 2 MP resolution, 1920 x 1080 Full HD 60 fps progressive scan for smooth live view Includes 32 GB SD card and C‑Mount adapter Faster inspection with direct Full HD output The HDMI interface and native 1920 x 1080 output reduce setup complexity by enabling immediate display on standard monitors, which streamlines documentation and speeds decision-making in quality control. A 2 MP sensor delivers sufficient detail for routine inspection tasks while keeping file sizes manageable, so capture workflows remain efficient without an elaborate imaging chain. The compact design and C‑Mount adaptability support integration with a wide range of optical heads and trinocular microscopes used in workshop and lab environments. Consistent image quality from a sensitive sensor A Sony CMOS 1/2.8" sensor with pixel size 2.9 x 2.9 µm and a sensitivity of 1300 mV/lux‑sec produces reliable images even at modest illumination levels, reducing the need for intense lighting during delicate inspections. The 12 bits colour depth and progressive scan mode preserve tonal gradation and avoid artefacts in moving subjects, while the 60 fps capability (mode-dependent) supports smooth live viewing for alignment and real‑time evaluation. These traits make the camera suitable for documentation, basic measurement tasks and instructional capture. Ready for immediate use and flexible storage options Delivery includes a 32 GB SD card, C‑Mount 0.37x adapter and adapter rings (30.0 and 30.5 mm to 23.2 mm), together with a calibration slide (10 mm/100), enabling quick setup and reliable scale reference for metrological tasks. Onboard SD storage supports expansion to 128 GB, allowing longer recording or larger image datasets without interruption. Power flexibility (100–240 Vac to 12 Vdc/1 A) and both HDMI and USB connectivity simplify integration into existing inspection benches and documentation stations. Robust operation in typical lab and workshop conditions Designed for stable performance in varied environments, the imaging module operates across a wide temperature range (-10–50°C) and 30–80% relative humidity, making it suitable for both controlled laboratory settings and less forgiving workshop areas. A measured noise level of 42 dB ensures unobtrusive operation during extended use. Progressive scanning and digital output provide dependable frame delivery for measurement work, while the compact mechanical dimensions (Ø51 x 60 mm) permit installation where space is limited. Discuss integration, accessory options and shipping with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and fast supply from our European stock Technical Data SKU: VC.3023 Manufacturer: Euromex Model series: HD‑Mini Product type: Microscope camera Digital output: HDMI Connection: HDMI Core specifications Resolution: 2 MP / 1920 x 1080 Sensor: Sony CMOS 1/2.8" Frame rate: 60 fps (Live view, mode-dependent) Pixel size: 2.9 x 2.9 µm Sensitivity: 1300 mV/lux‑sec Colour depth: 12 bits Format: 1/2.8" HDTV 1080p Noise level: 42 dB Operating temperature: -10–50°C Humidity: 30–80% Power supply: 100–240 Vac to 12Vdc/1A Features & accessories Progressive scan Storage: SD 32 GB included, up to 128 GB Included adapters: 30.0 and 30.5 mm to 23.2 mm Calibration slide 10 mm/100 C‑Mount adapter 0.37x Interface: HDMI and USB FAQ What microscopes is the camera compatible with? The HD‑Mini VC.3023 fits microscopes that accept C‑Mount connections; included adapter rings enable use with common trinocular and inspection heads. Is live video smooth enough for alignment tasks? Yes, the progressive scan sensor and 60 fps capability ensure smooth live viewing suitable for alignment and assembly inspection with the VC.3023. Can recordings be stored directly on the device? Recording to the included 32 GB SD card is supported; the camera accepts SD cards up to 128 GB for extended capture. How does the sensor perform under low light? The Sony CMOS 1/2.8" sensor with 2.9 x 2.9 µm pixels and sensitivity of 1300 mV/lux‑sec provides good performance at moderate illumination, reducing dependence on strong lighting. Is a calibration reference supplied for measurements? A calibration slide (10 mm/100) is included with the VC.3023 to facilitate scale verification and basic metrological checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
λ/4 Plate Slide for Transmitted Illumination Polarisation Models, IS.9612 - Euromex
Combining precise quarter-wave retardation with a quick-action slider, this accessory delivers reliable polarisation control for transmitted-light microscopy, ideal for contrast enhancement and workflow efficiency. Order the Euromex IS.9612 directly via Metav Werkzeuge or request advice from our consultants. λ/4 Plate in Slider for Transmitted-Light Illumination — iScope Polarisation Accessory (Euromex IS.9612) The λ/4 plate in slider for transmitted-light illumination for iScope polarisation models IS.9612 is an optical accessory enabling controlled retardation for polarisation contrast in transmitted-light microscopy. Quarter-wave retardation plate for polarisation contrast Compact slider mount for rapid insertion and removal Compatible with iScope polarisation series Designed to improve transmitted-light imaging consistency Enhanced contrast and controlled retardation for clearer imaging The accessory uses a quarter-wave plate (λ/4) to transform linear into circular polarisation or to introduce a defined phase shift between orthogonal polarisation components. This retardation reduces interference effects and improves visibility of birefringent structures in transmitted-light applications. For laboratory technicians and quality-control staff, the technical advantage is straightforward: better contrast with minimal modifications to the optical path. The slider design allows the optical element to be introduced without dismounting condenser assemblies, preserving alignment and saving time during routine inspections. Workflow advantage from the slider mechanism Fitting the plate in a slider mount provides immediate operational benefits: the element can be engaged or removed in seconds, which supports rapid switching between polarised and non-polarised transmitted-light modes. In production or classroom environments where throughput matters, this accessory reduces downtime and simplifies sample handling. The compact form factor integrates with iScope polarisation units and maintains a consistent optical position, so measurement reproducibility and imaging consistency are supported without complex recalibration. Built for dependable optical performance in microscopy tasks Manufactured to support polarisation contrast methods, the component contributes to repeatable imaging results across microscopy workflows. Its role in transmitted-light polarisation enhances the detection of stress patterns, crystalline structures and fine textural detail in materials and biological specimens. The accessory is therefore suited to research laboratories, industrial inspection benches and educational settings seeking improved visual differentiation of anisotropic features. For further specification details or to verify compatibility with a specific iScope variant, technical consultation is available. Secure the Euromex IS.9612 via Metav Werkzeuge for precise polarisation control and seamless integration into iScope setups; contact Metav Werkzeuge for tailored specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9612 SKU: IS.9612 Brand: Euromex Product type: Microscope illumination accessory Facts File size: 37693 Gallery filename: IS.9612.jpg Category path: Microscopy accessories › Contrast methods › Polarisation Special features Quarter-wave plate (λ/4) in slider for transmitted-light illumination Designed for iScope polarisation models Application: polarisation contrast in transmitted-light microscopy FAQ What is the primary function of the λ/4 plate in this accessory? The λ/4 plate in the Euromex IS.9612 introduces a defined phase retardation to enhance polarisation contrast in transmitted-light microscopy, improving visibility of birefringent details. Which microscope series is this slider designed for? The slider is designed for iScope polarisation models and fits the corresponding transmitted-light illumination path of that series. Can the plate be inserted and removed without realigning the microscope? Yes, the slider mount allows rapid insertion and removal with minimal disturbance to the optical alignment, supporting consistent imaging across sessions. What types of samples benefit most from using this polarisation accessory? Samples exhibiting birefringence—such as crystalline materials, polymers, or stressed transparent components—benefit substantially, as do biological specimens where polarisation reveals structural detail. Is additional calibration required after introducing the plate? Basic checks are recommended, but the slider is designed to maintain optical positioning so extensive recalibration is usually unnecessary. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
λ/4 Plate Slider for Incident Light Illumination Polarisation Models, IS.9612-R - Euromex
Take advantage of precise polarisation control and space-saving integration to enhance reflected-light inspections; the compact slider design ensures quick insertion and repeatable positioning while maintaining optical performance. Order the accessory directly via Metav Werkzeuge or ask our consultants for application advice. Quarter-wave plate slider for reflected-light polarisation — Euromex IS.9612-R The Quarter-wave plate slider IS.9612-R is a precision accessory for polarisation microscopy, designed to introduce adjustable retardation in reflected-light illumination for iScope polarisation models. Quarter-wave plate in slider format For reflected-light illumination Compatible with iScope polarisation models Manufacturer: Euromex, SKU IS.9612-R Improved contrast and polarisation control for reflected-light work A quarter-wave plate (λ/4 plate) is an optical retarder that shifts the phase between orthogonal polarisation components; this converts linearly polarised light into circular polarisation or adjusts the ellipticity of the beam. In reflected-light microscopy, that phase shift can be used to enhance contrast and reveal surface stress or birefringence effects that would otherwise remain hidden. The slider-mounted design permits quick changeover and consistent optical alignment, ensuring that the retardation effect is reproducible from one specimen to the next. Slider format that speeds up routine inspection The slider mechanism integrates the retarder element into standard filter housings or illumination carriers used in polarisation setups, enabling immediate insertion and removal without additional tools. This format supports efficient workflows in production control and research labs where time and repeatability matter. By combining compact physical integration with stable optical positioning, the slider reduces handling time and minimises the chance of misalignment, delivering repeatable positioning and improved throughput during microscope-based inspections. Designed for iScope polarisation systems and reflected-light applications This accessory has been developed for compatibility with iScope polarisation models, matching the mechanical and optical interfaces commonly used in those systems. The element is intended specifically for reflected-light illumination, so it is best suited to surface analysis, metallography and materials inspection tasks where polarisation effects on reflected beams are exploited. The manufactured build and optical finish support consistent results in routine laboratory and quality-assurance environments. Practical benefits for laboratories and technical inspection Choosing a dedicated quarter-wave slider enables targeted enhancement of imaging contrast with minimal modification to existing equipment. Laboratories benefit from a compact, purpose-built optical element that fits into established polarising workflows, offering a clear technical upgrade without the need for extensive reconfiguration. For teams assessing surface features, stress patterns or anisotropic coatings, the component provides a reliable method to make those characteristics more visible under polarisation conditions. For precise polarisation upgrades, order the Euromex quarter-wave plate slider via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fit and application details. Technical Data Manufacturer article number: IS.9612-R SKU: IS.9612-R Manufacturer: Euromex Product type: microscope illumination Facts No detailed numerical specifications provided Special features Quarter-wave plate in slider for reflected-light illumination Compatible with iScope polarisation models Category path: Polarisation (microscopy accessory) Image: IS.9612-R.jpg — https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1d/a5/f1/6a/6af1a51dd8ecf2f60acae091/IS.9612-R.jpg FAQ What does a quarter-wave plate do in reflected-light microscopy? A quarter-wave plate introduces a phase shift between orthogonal polarisation components; in reflected-light applications the IS.9612-R from Euromex alters polarisation states to enhance contrast and reveal birefringent or stress-related features on surfaces. Is this slider compatible with iScope polarisation models? Yes — the slider is designed for use with iScope polarisation models and fits common reflected-light filter housings used in those systems. Can the quarter-wave slider be used for transmitted-light polarisation? The IS.9612-R is specified for reflected-light illumination; for transmitted-light polarisation applications, check the system requirements and seek a retarder specified for transmitted-light use. How does the slider format benefit routine inspections? The slider format enables rapid insertion and removal with stable optical alignment, delivering repeatable positioning and reduced handling time during inspection processes. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com