SL.5504 Microscope Replacement LED Illumination Unit, Incident Lighting - Euromex
Take advantage of reliable LED incident lighting and straightforward replacement to restore microscope illumination quickly; the compact LED module reduces service downtime while providing stable, flicker-free light. Order the unit directly via Metav Werkzeuge or contact their consultants for technical advice. Euromex SL.5504 — Microscope replacement illumination (LED incident unit) The Euromex SL.5504 is a dedicated LED replacement unit for incident illumination in laboratory and educational microscopes, designed to restore consistent lighting performance in observation and inspection tasks. LED replacement unit for incident illumination Compact replacement unit for microscope lighting Article number SL.5504, brand Euromex Consistent, energy-efficient illumination for incident lighting The LED module provides a stable light source optimised for incident illumination, supporting improved surface contrast and clear specimen visibility under reflected-light setups. As an LED replacement unit, the module delivers consistent output without the warm-up and flicker associated with some older lamp technologies, which benefits image capture and prolonged observation sessions. This lighting solution is particularly useful where steady, repeatable illumination is required for inspection, teaching or documentation work. Simple swap-out and practical installation guidance The replacement unit is conceived as a compact replacement unit for microscope lighting modules; installation typically involves removing the existing lamp insert and fitting the new LED module into the lamp housing and connector provided by the instrument. Compatibility depends on the lamp housing type and connector arrangement used by the microscope model, so match the physical module dimensions and connector format before fitting. This approach reduces machine downtime and simplifies maintenance tasks in workshops and laboratories without requiring complex setup. Reliable partner and sensible choice for workshops and teaching labs Choosing a compact LED lamp module supports operational efficiency through reduced maintenance intervals and lower energy consumption compared with legacy lamps. Metav’s positioning as a precision partner means access to a broad range of measurement and workshop products combined with experienced distribution from Emmerich; this background underpins supply reliability and straightforward procurement for educational facilities and industrial workshops. The result is a practical lighting replacement that aligns with modern workshop standards and keeps routine inspection workflows running smoothly. Contact Metav Werkzeuge for procurement of the Euromex SL.5504 LED replacement unit or for tailored advice on lamp compatibility and delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Manufacturer: Euromex Manufacturer article number: SL.5504 SKU: SL.5504 Product type: Microscope replacement illumination Facts No numeric specifications provided in the supplied data Special features LED replacement unit Incident illumination (reflected light) Product category: Microscopy accessories > Lighting > Lamps Source reference: Education PDF (LED replacement unit, incident illumination) FAQ What type of light source does this replacement unit use? The Euromex SL.5504 uses an LED light source configured for incident illumination to provide stable reflected-light performance. Can the SL.5504 be used with any microscope? The Euromex SL.5504 is a replacement lamp module intended for microscopes that accept the same style of lamp insert and connector; compatibility must be checked against the instrument’s lamp housing and connector format. Is special wiring required to install the replacement unit? Installation of the Euromex SL.5504 generally follows the lamp housing’s standard fitting procedure and does not require additional wiring if the connector and housing match the instrument specification. Will this module improve image stability during documentation? Yes, the LED-based design of the SL.5504 provides consistent illumination and reduced flicker, which supports more reliable image capture and documentation in inspection and teaching scenarios. Where is information about the SL.5504 sourced from? Product details for the Euromex SL.5504 are taken from the supplied education PDF and the provided product data. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Stereo-Mikroskop ST-30-2L 20x/40x vergr.
Stereo-Mikroskop ST-30-2L 20x/40x vergr.
StereoBlue Protective Glass Window SB.8950, Replacement Protective Glass - Euromex
Take advantage of a genuine replacement designed for reliable protection and uninterrupted observation: the protective glass preserves the inspection area while reducing the risk of contamination, and its exact fit for the StereoBlue range simplifies maintenance. Order the replacement directly via Metav Werkzeuge or consult the specialists for compatibility details. Protective Glass Window for StereoBlue SB.8950 — replacement window for Euromex stereomicroscopes Protective Glass Window for StereoBlue SB.8950 is an intended replacement pane for StereoBlue stereomicroscope systems, providing a protective barrier for the optical path and work area. Protective barrier for optical path Original Euromex replacement part Compatible with StereoBlue series Simple spare-part designation SB.8950 Preserve observation quality by protecting the optical path The replacement pane is specified as a protective glass window for the StereoBlue series and is intended to act as a barrier between the specimen area and the instrument internals. By keeping contaminants and stray particles away from lenses and internal components, the spare part supports consistent optical clarity during routine inspections. For workshops and laboratories where repeated handling occurs, a dedicated protective pane reduces the need for invasive cleaning of the instrument itself and helps maintain repeatable viewing conditions. Minimise downtime with a clearly identified original spare part As an original Euromex spare (SKU SB.8950), the unit simplifies parts management and replacement procedures. The clear designation enables quick procurement and ensures the replacement matches the original specification for the StereoBlue range. Using an identified spare minimises fitment uncertainty and supports efficient maintenance cycles, which is particularly valuable in production or quality-assurance environments where device availability directly affects throughput. Practical handling and maintenance advantages for workshop use The window is designed as a serviceable component, allowing safe removal and reinstatement during routine maintenance without interfering with the core optical system. Keeping a spare protective pane as part of standard workshop inventory reduces interruptions: a replaced pane restores the protected working environment immediately, aiding operational continuity. The component is therefore a practical item to include when establishing a preventive maintenance plan for stereomicroscopes. Trusted supply and clear procurement from a precision partner Sourcing original spare parts through a reliable channel supports operational certainty. Metav combines broad product availability with an established distribution base, delivering precision items to workshops across Europe. The supply chain approach reduces procurement complexity and helps ensure that replacement parts for inspection equipment remain accessible when required, reinforcing both day-to-day reliability and long-term asset care. Contact Metav Werkzeuge for original Euromex spare parts and procurement advice: Metav Werkzeuge GmbH in Emmerich provides expert guidance for spare-part selection and order fulfilment Technical Data Article number: SB.8950 Manufacturer: Euromex Product type: Microscope protective glass SKU: SB.8950 Facts Gallery file size: 52,894 bytes UID: SB.8950 Special features Compatible with StereoBlue series Designation: Protective glass window Category: For stereomicroscopes Label: Schutzglasfenster für StereoBlue SB.8950 FAQ Is this an original Euromex spare part? This is listed as an original Euromex replacement window, designated SB.8950, intended for the StereoBlue series. Will the pane fit any StereoBlue model? The pane is specified for the StereoBlue line; compatibility should be checked against the instrument model to confirm fit for the intended device. What function does the protective window perform? The window serves as a barrier protecting the optical path and specimen area, helping to limit contamination of internal optics. Can the protective window be cleaned or must it be replaced? Routine gentle cleaning of the protective window can extend its service life, while keeping an original spare available ensures a quick swap when replacement is required. How is the spare identified for ordering? The spare is identified by the Euromex designation and SKU SB.8950 to ensure accurate procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
SZM-3 Stereomikroskop Binokular mit Säulenstativ
SZM-3 Stereomikroskop Binokular mit Säulenstativ
SZM-4 Stereomikroskop Trinokular mit Säulenstativ
SZM-4 Stereomikroskop Trinokular mit Säulenstativ
SZM-LED1 Stereomikroskop Binokular mit Säulenstativ, LED-Beleuchtung
SZM-LED1 Stereomikroskop Binokular mit Säulenstativ, LED-Beleuchtung
SZM-LED2 Stereomikroskop Trinokular mit Säulenstativ, LED-Beleuchtung
SZM-LED2 Stereomikroskop Trinokular mit Säulenstativ, LED-Beleuchtung
T2 Adapter 35mm For Nikon D Digital SLR Cameras, Camera-Mount - Euromex
Take advantage of the clear compatibility with Nikon D series and the simple mechanical coupling that enables DSLR imaging on microscopes; order the AE.5025 directly via Metav Werkzeuge or consult the team for application guidance. T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 — Microscope camera adapter by Euromex T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 provides a mechanical interface to mount Nikon D series digital‑SLR bodies to microscope optical ports for photographic documentation and analysis. Direct fit for Nikon D bodies Enables DSLR‑microscope coupling SKU AE.5025 for quick identification Stable DSLR coupling for reliable imaging A T2 adapter converts the camera mount into a practical connection between a digital‑SLR and a microscope, allowing photographic documentation without modifying the imaging device. The mechanical interface ensures that the optical axis is maintained, which supports consistent framing and focus when capturing specimens. This characteristic is particularly useful when established camera bodies are repurposed for laboratory imaging, as it preserves existing photographic workflows while integrating with microscopy equipment. Practical compatibility that streamlines workflows Designed for Nikon D series Nikon D digital‑SLR cameras, this coupling element simplifies transitions between photodocumentation and routine microscopy tasks. The adapter reduces the need for proprietary camera heads by enabling the use of standard SLR cameras for measurement imaging or record keeping. Laboratories, educational facilities and quality‑inspection stations benefit from the straightforward compatibility, as the adapter supports efficient image capture and reduces equipment redundancy. Clear identification and ordering for operational continuity The article is listed under SKU AE.5025, which facilitates procurement and stock management. The compact description and explicit compatibility information allow purchasing teams to verify fit before acquisition, reducing lead time in procurement cycles. For small workshops and larger facilities alike, the adapter presents a practical option to expand imaging capability using existing photographic hardware while keeping inventory and documentation concise. For application advice and to confirm availability of the Euromex T2 adapter AE.5025, contact Metav Werkzeuge in Emmerich — Metav’s specialists provide ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: AE.5025 SKU: AE.5025 Brand: Euromex Product type: Microscope camera adapter Data Compatibility: Nikon D digital‑SLR cameras Special features T2 mounting interface Intended for coupling DSLR cameras to microscopes Label: T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 FAQ What cameras is the adapter compatible with? The adapter is compatible with Nikon D series digital‑SLR cameras; the T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 enables mechanical coupling to microscope ports. Can the adapter be used for photomicrography in a teaching lab? Yes. The AE.5025 is suitable for integrating a Nikon D digital‑SLR into teaching‑lab microscopes for documentation and demonstrative imaging. Does the adapter alter the optical properties of the microscope? The adapter provides a mechanical connection and preserves the optical axis; it does not introduce image processing or electronic modification to the optical path beyond the camera coupling. Is the product suitable for professional documentation tasks? The T2 Adapter AE.5025 supports photographic documentation workflows by enabling the use of a full‑frame or APS‑C Nikon D camera for higher‑resolution image capture when linked to a microscope. How is the adapter identified for ordering and stock purposes? The product is listed under SKU AE.5025 and labelled as T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025, simplifying procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
T2 Adapter for Canon EOS Digital-SLR Cameras, Camera Mount - Euromex
Take advantage of a precise mechanical interface and straightforward compatibility for reliable imaging results; the adapter connects Canon EOS digital‑SLR cameras to microscopes with a secure T2 coupling. Order the T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 directly via Metav Werkzeuge or ask our consultants if needed. T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 — Microscope camera adapter with T2 mount T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 is a purpose‑built microscope camera adapter that enables the attachment of Canon EOS digital‑SLR cameras to a variety of microscope systems for documentation and imaging. T2 mount for Canon EOS digital SLR Designed for microscope camera coupling Secure mechanical interface for imaging Stable mechanical coupling for accurate images A robust mechanical connection is essential for reproducible photographic documentation in laboratories and workshops. The T2 adapter offers a simple T‑mount interface that creates a stable connection between a Canon EOS digital‑SLR and the microscope optical path, keeping the imaging axis aligned and minimising unwanted movement. This mechanical stability supports consistent focus and exposure across image series, which is particularly valuable for quality assurance, sample archiving and comparative analysis in inspection workflows. Broad compatibility and straightforward integration Designed as a microscope camera adapter, the unit fits the common T2 mounting standard and is intended for use with Canon EOS cameras and compatible microscope ocular or trinocular ports. The adapter facilitates a low‑complexity setup: the camera is attached via the adapter and the microscope is used in its usual configuration, avoiding time‑consuming modifications. For facilities seeking to digitise microscopes without altering the instrument, this adaptor provides a pragmatic balance of compatibility and operational ease, helping to shorten the time from setup to image capture. Practical benefits for documentation and education Connecting a digital‑SLR to a microscope elevates image quality and control compared with many dedicated microscope cameras, offering flexible sensor choices and familiar camera settings. The adapter supports high‑resolution documentation, enabling detailed records for reports, publications or training materials. By using a standard camera body, users gain access to interchangeable lenses, manual exposure control and established post‑processing workflows, which together improve image versatility and long‑term archiving of visual data. Integration into professional workflows For laboratories, workshops and teaching facilities, the adapter contributes to a reproducible imaging process that aligns with professional documentation standards. The mechanical interface reduces setup variance between sessions and operators, supporting reliable results across projects. When paired with a Canon EOS body, the combination becomes an adaptable imaging solution that benefits inspection routines, R&D tasks and educational demonstrations, enhancing both efficiency and traceability in daily operations. For a reliable microscope imaging solution with the Euromex T2 adapter AE.5040, contact Metav Werkzeuge — our Emmerich‑based specialists will advise on compatibility and supply options to suit the workflow. Technical Data Manufacturer: Euromex Article number: AE.5040 SKU: AE.5040 Product type: Microscope camera adapter Label: T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 Image file: AE.5040.jpg Gallery URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/21/a5/f1/6a/6af1a521d8ecf2f60acae1ad/AE.5040.jpg Facts Image file size: 56083 bytes Gallery id: 6af1a521d8ecf2f60acae1ad Special features Compatibility: Canon EOS digital SLR cameras Mount type: T2 interface for microscope coupling Application area: System camera / microscopy accessories Category path: Microscopy accessories > Cameras > Camera adapters > System camera FAQ What cameras are compatible with this adapter? The adapter is specified for Canon EOS digital‑SLR cameras and provides a T2 interface to pair such camera bodies with microscope optical ports. Does the adapter include additional accessories for mounting? No accessories are specified for the T2 Adapter AE.5040 in the provided product data. Will using this adapter affect the microscope focus? The adapter creates a fixed mechanical coupling; depending on the microscope optical design and whether a projection lens or ocular is used, small focus adjustments may be necessary when mounting a Canon EOS camera. Can the adapter be used with other camera brands or mirrorless systems? The AE.5040 is described for Canon EOS digital‑SLR cameras; adaptation to other brands or mirrorless systems may require additional camera‑specific fittings that are not listed in the product data. Is this adapter suitable for routine laboratory documentation? Yes, the adapter is intended to facilitate high‑quality documentation by linking a Canon EOS camera to a microscope, supporting consistent image capture for laboratory records and reports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
TS324 Stereo Mikroskop Serie Mts 0124
Stereo Mikroskop for precise measurements in the range 0mm to 0mm. The so-called monobloc, which is the vernier, is made from one piece. External, internal, depth and step measurements can be carried out with calip Stereo Mikroskop.Available in the following versions:| Article number | | | | ||Summary and technical data for on Metav IndustryLine caliper Stereo MikroskopManufacturer: Metav IndustryLineModel: Stereo MikroskopRange: 0mm - 0mmAccuracy:SpindleWorking distance: 105Working surface: ⌀ 95Collet: 76Throat depth: 140 mmSpecial features: Speziell entwickelt für anspruchvolle Anwendung in Ausbildung, Labor und IndustrieAdjustment of dioptres: ±6Adjustable ocular distance: 52-76mmSetting standard:Focal area: 50Base: 292x283Power: 6V/10W+220V/5WLight: regelbares halogen Auflicht und Durchlicht Fluoreszenz LampeTempered lensMikroscope head: 45⁰ Schrägeinblick, um 360⁰ drehbarColumn: Ø25x240 mmAccessories included: Mit Okular SWH10Order now Stereo Mikroskop Online.
Weiß/Schwarzer Objekttisch, Typ 2, 95mm Durchmesser
Weiß/Schwarzer Objekttisch, Typ 2, 95mm Durchmesser
ZE.1659 Stereomicroscope Head Compatibility Reference, Z-Series - Euromex
Take advantage of a precision stereomicroscope head from Euromex delivered as a clear compatibility reference; its modular role reduces integration uncertainty and supports efficient inspection workflows. Order the Z-Series ZE.1659 directly via Metav Werkzeuge or consult Metav’s specialists for configuration guidance. Z-Series ZE.1659 Euromex stereomicroscope head — compatibility reference The Z-Series ZE.1659 is a Euromex stereomicroscope head offered as a compatibility reference for laboratory and inspection environments, intended for integration into modular optical setups. Euromex Z-Series stereo head Designed as a compatibility reference Suitable for laboratory and inspection setups Streamlined integration for modular systems that saves procurement time The Z-series stereo head is presented principally as a compatibility reference, which streamlines component selection when assembling inspection and laboratory optics. By specifying the head as a reference model, procurement and engineering teams receive a clear marker for mechanical and optical matching, reducing the risk of ordering incompatible components and shortening lead times. This approach supports predictable assembly workflows and helps maintain continuous production and inspection capacity. Clear role in visual inspection delivering predictable outcomes As a stereomicroscope head, the unit is built for binocular observation and visual inspection tasks, where depth perception and three-dimensional viewing are essential. The designation as a reference component suggests suitability for applications such as quality control, electronics inspection and routine laboratory examination. Where a complete optical configuration is required, the head allows modular combination with stands, objectives and illumination modules to create a tailored inspection station that meets specific magnification and working-distance needs. Documentation status and what to expect when specifying the head The available information identifies the product as a Z-series stereomicroscope head with the Euromex part number ZE.1659; however, a full configuration is not described in the supplied documentation. This means that specific details such as magnification ranges, working distance, objective options and integrated lighting are not listed in the source file. When specifying the unit, plan for modular selection of objectives and accessories to achieve the desired optical performance rather than relying on a preconfigured eyepiece–objective assembly. Benefits for workshops and laboratories seeking reliable modularity Selecting a reference stereo head supports a pragmatic, modular procurement strategy: optical systems can be assembled to match application requirements while keeping replacement parts and upgrades standardised. The modular character of the head reduces long-term maintenance complexity and supports predictable spare-part planning. For production environments where repeatability and quick turnaround are priorities, the clarity of a reference designation contributes to operational reliability and straightforward inventory control. For purchase and verified compatibility advice, contact Metav Werkzeuge to arrange model-specific configuration support and secure delivery from our Emmerich stock — Metav Werkzeuge can advise on how the Euromex Z-Series ZE.1659 fits into a complete inspection solution Technical data Article number: ZE.1659 SKU: ZE.1659 Manufacturer: Euromex Model series: Z-Series Product type: Stereomicroscope head Label: Z-Serie ZE.1659 Facts Numerical specifications: not provided in source data Configuration details: not specified in source data Special features Listed as a compatibility reference only Full configuration not described in the supplied documentation Intended for modular optical system integration FAQ What is the intended use of this stereomicroscope head? The Z-Series ZE.1659 by Euromex is intended as a binocular inspection head for modular stereomicroscope systems, used where three-dimensional visual inspection and depth perception are required. Are optical specifications such as magnification and working distance available? The supplied documentation does not include detailed optical specifications for the Z-Series ZE.1659; magnification ranges and working-distance values are not provided in the source file. Can the head be combined with different objectives and stands? The designation of the unit as a compatibility reference implies modular use within Z-series systems, allowing combination with appropriate objectives and stands selected to meet application requirements. Is the Z-Series ZE.1659 supplied as a complete microscope? The item is described solely as a stereomicroscope head; the source data does not indicate delivery of a complete microscope or included accessories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø 23.2mm Alignment Telescope Phase Contrast, iScope IS.9149 - Euromex
Benefit from precise phase-contrast alignment thanks to the IS.9149’s dedicated fit and compact iScope design. Optimised for repeatable phase centring and quick visual checks, this tool streamlines setup and reduces rework on routine microscopy tasks. Order the alignment telescope directly via Metav Werkzeuge or consult their technical advisers for verification. Phasenzentrierteleskop iScope IS.9149 – Alignment telescope for phase contrast, Ø 23.2 mm tube (Euromex) The Phasenzentrierteleskop iScope IS.9149 is a compact alignment telescope intended to centre phase rings within a 23.2 mm eyepiece tube, supporting reliable phase contrast imaging in laboratory and teaching microscopes. Optimised for phase contrast alignment Ø 23.2 mm tube compatibility Compact iScope design for stability Quick visual verification of centring Precise centring for consistent phase contrast imaging An alignment telescope facilitates exact alignment of the condenser phase ring and objective phase plate, which is essential for clean phase contrast images. The IS.9149 fits microscopes with a Ø 23.2 mm tube and provides a clear optical reference for adjusting the condenser and phase ring position. By using a dedicated centring tool, technicians achieve repeatable alignment without resorting to trial-and-error at the specimen plane, cutting setup time and reducing the risk of imaging artefacts. Faster setup and reduced downtime in routine workflows A simple insertion into the eyepiece tube allows immediate visual inspection of the phase ring position; this straightforward procedure translates into measurable time savings during instrument preparation. The alignment telescope removes uncertainty from the adjustment process, enabling staff to return microscopes to productive use faster and maintain consistent results across shifts. For facilities with multiple instruments, standardising alignment with a centring device supports efficiency and reduces training needs. Robust design appropriate for labs and teaching environments The iScope series places emphasis on compactness and stability, making the accessory suitable for frequent handling in both industrial and educational settings. Although the component is small, its mechanical fit and optical clarity are selected to provide dependable performance under daily use. The construction supports routine visual checks, and the compact format simplifies storage alongside other microscopy accessories. Guidance and further information for confident use If additional clarification of compatibility or alignment technique is required, documentation referenced with the product provides further detail on application and procedure. The alignment telescope is described for phase contrast use and noted to fit the Ø 23.2 mm tube standard; users uncertain about suitability for a particular microscope model can request supplementary technical data. Metav Werkzeuge can supply further specifications or advise on integrating the centring tool into standard operating procedures. For reliable phase contrast alignment, consider the Euromex iScope IS.9149 and contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch via their technical team Technical Data Article number: IS.9149 SKU: IS.9149 Brand: Euromex Model series: iScope Product type: Alignment telescope for phase contrast Facts Tube diameter: Ø 23.2 mm Special features For phase contrast alignment Fits 23.2 mm eyepiece tube iScope series accessory Source: Education PDF p.25; Life Science PDF p.16,42 FAQ How does the alignment telescope improve phase contrast imaging? The alignment telescope enables precise centring of the phase ring relative to the optical axis; using the IS.9149 ensures the phase ring and condenser are aligned so phase contrast effects are rendered correctly. Which eyepiece tube does this accessory fit? The IS.9149 is specified for a Ø 23.2 mm tube and is intended for microscopes that accept that eyepiece standard. Is the IS.9149 suitable for teaching laboratories? Yes, the compact and robust design of the iScope accessory makes it well suited to teaching environments where frequent, quick alignment checks are required. Will the alignment telescope work with all phase contrast objectives? The IS.9149 supports the alignment process for phase contrast objectives by centring the phase ring; compatibility depends on the microscope’s eyepiece tube and phase contrast installation rather than objective brand. Where can additional technical documentation be obtained? Further technical details and application notes referenced in the product documentation are available; Metav Werkzeuge can provide supplementary data or advise on suitability for specific microscope models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø30 10x Eyepiece For Stereo Microscopes, 23 Mm Field Of View - Metav IndustryLine
Take advantage of the compact Ø30 barrel and precise 10x magnification together with a wide 23 mm field of view for reliable inspection work; order the eyepiece directly via Metav Werkzeuge or consult the team for integration advice. SWH10X-CM eyepiece (10x magnification, Ø30 barrel) — Metav IndustryLine The SWH10X-CM eyepiece is a high-clarity optical accessory for stereo microscopes, designed to extend magnification and improve visual throughput in inspection and assembly tasks 10x magnification for detailed inspection Ø30 barrel for standard stereo microscope fit 23 mm field of view for wider scene coverage Lightweight construction at 0.15 kg for easy handling Consistent detail and measurement confidence with every observation The eyepiece delivers a 10x view that increases image detail without compromising ease of use, enabling quicker recognition of fine features during inspection. A 23 mm field of view provides a broader visual context than narrower oculars, reducing the need for frequent repositioning of components under the lens and thereby speeding up repetitive tasks. Optical consistency is particularly beneficial in quality control and small-assembly environments where repeatable visual assessment reduces rework and shortens cycle times. In practical terms, the combination of magnification and field size supports both visual checks and documentation routines where seeing more at once saves time. Seamless integration and ergonomic handling for workshop workflows Engineered with a Ø30 barrel, the eyepiece is compatible with common stereo microscope tubes and can be swapped quickly to adapt existing setups. The compact, lightweight design lowers the moment of inertia at the optical head, improving comfort during prolonged use and decreasing operator fatigue. For bench work and small-batch inspection, this means users can sustain attentive inspection for longer periods without loss of precision. The straightforward fit and handling characteristics also simplify inventory management: fewer adapters or special mounts are required when increasing magnification across multiple stations. Practical benefits for production and laboratory environments Beyond visual quality, the eyepiece contributes to measurable workflow gains: broader scene capture reduces handling time per part, and a stable optical interface improves consistency across multiple operators. The optical accessory suits routine inspection, soldering control, fine assembly and lab evaluation tasks where a reliable enlarged image is essential. Constructed for everyday use, the eyepiece balances robust handling with optical clarity, helping teams maintain throughput while upholding inspection standards under varying production conditions. For tailored advice on integrating the SWH10X-CM eyepiece into an existing microscope system or for delivery from Metav’s Emmerich distribution, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com — assistance is available to match the optical accessory to the specific inspection task. Technical data Article number: M503.241.5 GTIN: 4054469145167 Type: SWH10X-CM Facts Magnification: 10x Field of view: 23 mm Barrel diameter: Ø30 Weight: 0.15 kg Customs tariff number: 90119090 Special features Compatibility: stereo microscopes Compact, lightweight design Suitable for inspection and assembly tasks Brand: Metav IndustryLine FAQ What magnification does this eyepiece provide? The SWH10X-CM eyepiece offers a 10x magnification level suitable for detailed visual inspection. Which microscopes will this eyepiece fit? This eyepiece is designed for stereo microscopes with a Ø30 barrel tube and fits standard stereo optical heads. How wide is the visible scene through the eyepiece? The eyepiece provides a 23 mm field of view, allowing a wider area to be seen at once compared with narrower oculars. Is the eyepiece suitable for prolonged use at a workstation? Yes, the lightweight construction (0.15 kg) and ergonomic dimensions make it appropriate for extended inspection and assembly tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø30 20x Eyepiece For Stereo Microscopes 14mm Field Of View - Metav IndustryLine
Take advantage of the combination of 20x magnification, a Ø30 mm barrel, and a generous 14 field of view to upgrade inspection capability with minimal integration effort; order the ocular directly via Metav Werkzeuge or consult the technical team for compatibility advice. SWH20X-CM-1 eyepiece — 20x magnification, Ø30 mm barrel (Metav IndustryLine) A SWH20X-CM-1 eyepiece engineered to increase magnification for stereo microscopes and improve visual resolution in inspection and assembly tasks. 20x high-power magnification Ø30 mm barrel for standard mounts Wide 14 field of view Robust construction for repeated use Clearer detail where it matters The 20x magnification provides a substantial increase in apparent detail without the need to change the core microscope head, making fine inspection and component verification more efficient. With a Ø30 mm barrel the eyepiece fits standard stereo microscope mounts, so optical integration is straightforward. The nominal 14 viewing parameter yields a comfortable observable area that balances magnification with a usable field, reducing the need for excessive stage repositioning during quality checks. Built for frequent workshop use Designed with routine industrial use in mind, the ocular combines optical power and handling convenience to support repetitive inspection cycles. The construction emphasises reliability and easy seating in the eyetube to maintain alignment over multiple shifts. This stability translates into faster throughput and fewer re‑set checks, so measurement work and visual controls remain consistent across batches. Easy integration with existing systems Compatibility with standard stereo microscope fittings simplifies the upgrade path: the Ø30 mm mount is common across many laboratory and bench microscopes, permitting quick replacement or addition of the eyepiece. The compact barrel format keeps the optical axis steady and minimises vignetting, allowing technicians and inspectors to preserve familiar workflows while benefiting from enhanced magnification and a broader viewing area. A dependable partner for precise optics As part of the Metav IndustryLine range, this ocular benefits from a distribution and quality filter based in Emmerich that supports reliable supply to European workshops. Metav’s position as a long‑standing precision partner means the component is available alongside complementary optical accessories and technical guidance, supporting a practical route from specification to deployment. Contact Metav Werkzeuge for tailored advice on Metav IndustryLine optics and to confirm fitment for the SWH20X-CM-1 — email info@metav-werkzeuge.com or phone +49 2822 7131930 for prompt assistance from the Emmerich team Technical data SKU: M503.241.7 GTIN: 4054469145174 Type: SWH20X-CM-1 Name: Okular Category: Optik EClass: 21160592 Key figures Magnification: 20x Barrel diameter: Ø30 Field of view: 14 Weight: 6.15 kg Tariff code: 90119090 Features & compatibility Suitable for stereo microscopes Standard Ø30 mount compatibility High-power ocular optics Asset available: m5032411-main.jpg Category path: Optik FAQ What magnification does this eyepiece provide? The SWH20X-CM-1 provides 20x magnification for detailed inspection work. Which mounting size is required for installation? The ocular uses a Ø30 mm barrel suitable for standard stereo microscope mounts. What does the value "14" refer to in the specification? The figure 14 denotes the eyepiece’s field‑of‑view parameter, indicating a generous observable area at 20x. Is the SWH20X-CM-1 suitable for industrial inspection benches? Yes, the SWH20X-CM-1 is intended for workshop and laboratory inspection use and is compatible with common bench stereo microscopes. Is an image of the product available for review? An asset is provided (m5032411-main.jpg) for visual reference of the ocular. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø30 Stereo Microscope Eyepiece 10x SWH10X, 23mm Field Of View - Metav IndustryLine
Benefit from precise visual inspection with 10x magnification and a 23 mm field of view, packed into a standard Ø30 mm tube for straightforward integration with existing stereo microscopes. Order the eyepiece directly via Metav Werkzeuge or consult our specialists to ensure optical matching and quick delivery. Eyepiece SWH10X – 10x magnification, 23 mm field, Metav IndustryLine Eyepiece SWH10X is a precision optical accessory designed to increase the effective magnification of stereo microscopes for inspection, quality control and assembly tasks. 10x magnification for detailed inspection 23 mm wide field of view for efficient scanning Ø30 mm tube fits standard stereo microscopes Balanced weight for stable, low-vibration imaging Sharper inspection with proven optical gain The combination of 10x magnification and a 23 mm field of view accelerates visual inspection without compromising the overview needed for efficient scanning. Magnification increases the apparent size of details while field of view determines how much of the object is visible at once; the chosen balance reduces the number of repositioning steps during component checks and shortens inspection cycles. For workshops and inspection benches this translates into measurable throughput gains and fewer missed defects, supporting leaner quality processes. Straightforward integration into workplace optics Built to the common industry tube standard, the Ø30 mm tube ensures compatibility with a wide range of stereo microscopes and trinocular heads. The optical accessory inserts and secures in typical eyepiece holders, delivering consistent alignment and image centring. A compact, well scaled mass supports stable imaging with reduced hand‑induced vibration on benchtop stands. This reliability keeps measurement and visual inspection repeatable across shifts and operators, which is essential for production environments that rely on consistent visual standards. Practical handling and routine maintenance for industry use The optical accessory was conceived for daily use in production, laboratory and service settings: straightforward cleaning, rapid exchange and durable optics preserve performance over time. The compact design eases storage and transport between workstations, and the stable imaging characteristics support both manual inspection and documentation tasks such as photomacrography when integrated into camera-equipped stereo setups. For procurement and specification checks, the item is listed under Metav IndustryLine with clear identifiers for fast sourcing. Choose the Metav IndustryLine SWH10X eyepiece for reliable inspection results; contact Metav Werkzeuge for tailored specification advice and procurement at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M503.241.1 GTIN: 4054469145129 eClass: 21160592 Type: SWH10X Facts Magnification: 10x Field of view: 23 mm Tube diameter: Ø30 mm Weight: 0.5 kg Customs tariff number: 90119090 Applications / Features Designed to expand magnification of stereo microscopes Category: Optik Intended for inspection, assembly and quality control tasks Storytrigger: optik FAQ What microscopes is this eyepiece compatible with? The eyepiece is designed for standard stereo microscopes with a Ø30 mm eyepiece tube and is supplied as the Metav IndustryLine SWH10X (SKU M503.241.1). What image area can be expected with this accessory? The accessory provides a 23 mm field of view at 10x magnification, which balances detailed enlargement with efficient scanning of components. How does the SWH10X improve inspection workflows? By increasing apparent detail while maintaining a wide field, the SWH10X reduces repositioning and speeds visual checks, helping quality control and assembly lines to be more efficient. Are there any special mounting or adapters required? No special adapter is normally required for microscopes with a Ø30 mm eyepiece tube; compatibility details are listed under SKU M503.241.1 for procurement checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø48 0.5x Stereo Microscope Objective Attachment For Magnification Extension - Metav IndustryLine
Take advantage of the combination of precise optical adjustment and straightforward compatibility to improve inspection speed and repeatability; the 0.5× magnification and Ø48 mounting deliver a broader field of view with stable installation. Order the attachment lens directly via Metav Werkzeuge or contact the consultants for application advice. Attachment Lens M503.242.1 – 0.5× Auxiliary Optic for Stereo Microscopes (Ø48) The attachment lens M503.242.1 is an auxiliary optic designed to alter the effective magnification of stereo microscopes for wider observation fields in industrial and laboratory inspection settings. 0.5× magnification for wider field of view Fits Ø48 mounting on stereo microscopes Model W0.5 for consistent optical matching Metav IndustryLine quality assurance Greater overview with controlled magnification The 0.5× specification reduces the effective magnification while increasing the field of view, enabling operators to inspect larger areas without changing objectives or repositioning samples. This adjustment translates into fewer stage movements and faster throughput during routine visual checks, which is particularly advantageous in quality control and incoming inspection. By providing a predictable optical change, the accessory supports reproducible visual assessments and simplifies documentation of findings. Seamless compatibility and straightforward mounting Designed for Ø48 mounting interfaces, the accessory—specified as W0.5—matches common stereo microscope optical trains and mechanical mounts. The attachment integrates with existing stereo microscope setups, preserving parcentricity and focus range when correctly coupled, so alignment work is kept to a minimum. This compatibility reduces setup time in production environments and helps maintain consistent imaging geometry across inspection tasks with different magnifications. Stable construction for reliable handling Mechanical stability is essential when enlarging the observed area; a steady optical assembly reduces perceived vibration and improves image steadiness. The accessory's build provides the necessary support for routine use in inspection benches and laboratory workstations, with weight: 6.15 kg recorded in the technical specification for completeness. Stable optics contribute to repeatable measurements and reduce operator fatigue during longer inspection sessions, which in turn supports consistent quality outcomes. Practical gains for inspection workflows Introducing a dedicated auxiliary lens accelerates decision-making by offering a broader situational view while retaining sufficient detail for many assembly and inspection tasks. The accessory is well suited to applications where overview and context are as important as detail—for example, solder-joint inspection, component orientation checks, and initial defect screening. Backed by Metav IndustryLine selection criteria, the optic is an effective tool for workshops and small labs seeking to raise inspection efficiency without complex system changes. Select the Metav IndustryLine attachment lens for dependable optical adaptation and contact Metav Werkzeuge for application guidance or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M503.242.1 GTIN: 4054469145198 Type: W0.5 Diameter: Ø48 Customs tariff no.: 90119090 Weight: 6.15 kg Core specifications Magnification: 0.5× Mount diameter: Ø48 Model designation: M503.242.1 Special features Attachment lens for stereo microscopes Designed to increase field of view while altering magnification Category: Optik Suitable for: ZS0745 Brand: Metav IndustryLine FAQ What change in magnification does this accessory provide? The accessory adjusts the optical system by 0.5×, giving a noticeably wider field of view while reducing the effective magnification for broader inspection coverage. Will this fit common stereo microscope mounts? Yes, the unit is specified for Ø48 mounting and is compatible with stereo microscopes that accept Ø48 auxiliary optics; the model is identified as W0.5 to aid selection. Can this lens be used for incoming inspection and assembly checks? The accessory is suitable for visual inspection workflows where a larger overview is required; it supports quicker assessments and reduces sample repositioning for routine checks. Does the lens affect image alignment or focus range? When properly mounted, the attachment preserves the optical geometry and focus range expected from a matched auxiliary optic, minimising additional alignment work. Is the accessory supplied ready for use or does it require adjustment? The unit is delivered as an optical attachment; correct mechanical coupling to the microscope and a brief check of centring and focus are recommended before formal inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø48 0.7x Auxiliary Lens For Stereo Microscopes - Metav IndustryLine
Combine precise 0.7× magnification, a compact W0.7 design and a Ø48 mounting diameter for reliable inspection and documentation workflows; the result is a practical attachment for broader fields of view and faster visual checks. Order the auxiliary lens directly via Metav Werkzeuge or ask our consultants if needed. Auxiliary lens W0.7 (0.7×) by Metav IndustryLine — Ø48 mount A compact auxiliary lens W0.7 designed to extend the magnification range of stereo microscopes and improve visual inspection and documentation without changing primary objectives 0.7× magnification factor for broader field Ø48 mm mounting diameter for common eyepieces Designed for stereo microscopes and documentation Compact W0.7 design preserves optical quality See more at once — faster inspections with lower magnification Fitting an 0.7× magnification attachment reduces the overall magnification and consequently increases the field of view, which is especially useful when moving from detailed examination to rapid component inspection. This optical compromise shortens inspection cycles by allowing larger areas to be assessed at once while maintaining sufficient detail for quality checks. The result is more efficient visual workflows and fewer objective changes during batch inspections, supporting higher throughput in routine microscopy tasks. Simple integration — fits standard mounts and keeps image quality The Ø48 mounting diameter provides a standard interface for many stereo microscope eyepieces and camera ports, enabling quick installation and removal without special adapters. Thanks to the W0.7 construction, the attachment preserves alignment and maintains image homogeneity across the field, so documentation with camera systems remains consistent. Compatibility with common microscope setups reduces downtime and simplifies equipment management in production and laboratory environments. Practical benefits for inspection and documentation routines As a compact optical attachment, this lens offers a straightforward way to adapt existing microscope setups for overview tasks, inspection of larger samples and pre‑selection before high‑magnification analysis. The combination of a reduced magnification factor and stable mounting leads to fewer objective swaps and smoother transitions between magnification levels. Supplied as part of the Metav IndustryLine portfolio, the unit supports reliable supply and traceable ordering across European workshops and labs. Choose the Metav IndustryLine W0.7 auxiliary lens for wider fields of view and contact Metav Werkzeuge in Emmerich for expert advice and dependable European supply Technical Data Article number: M503.242.2 GTIN: 4054469145204 Manufacturer: Metav IndustryLine Category: Optics Tariff number: 90119090 Facts Magnification: 0.7× Mounting diameter: Ø48 mm Type designation: W0.7 eClass: 27371231 Special features Compact auxiliary lens design Intended for stereo microscope applications SKU: M503.242.2 Story trigger: optik FAQ What magnification does this attachment provide? The auxiliary lens provides a 0.7× magnification factor, allowing a notably wider field of view than the primary objective. Will the lens fit my microscope? The unit uses an Ø48 mm mounting diameter, suitable for many stereo microscope eyepieces and camera ports; check physical mounting standards for exact compatibility. Can this lens be used for documentation with a camera? Yes, the optical construction preserves image homogeneity and is suitable for documentation and camera‑based inspection workflows when attached to compatible stereo microscopes. What is the model designation and SKU? The type designation is W0.7 and the SKU is M503.242.2, useful for ordering and stock checks. Is this part part of a wider product range? The lens is offered within the Metav IndustryLine optics range and is intended to complement existing stereo microscope configurations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø48 1.5x Stereo Microscope Auxiliary Lens, W1.5 - Metav IndustryLine
Take advantage of the precise 1.5× magnification and compact Ø48 mounting to boost inspection accuracy without changing the existing optical train; the attachment delivers clearer detail at minimal setup effort. Order the attachment directly via Metav Werkzeuge or ask the consultants for integration advice. Attachment lens W1.5 — 1.5× magnification, Ø48 mount (Metav IndustryLine) The Attachment lens W1.5 increases the magnification of a stereo microscope by 1.5×, providing improved detail recognition for routine inspection and fine assembly tasks in laboratories and workshops. 1.5× magnification boost for stereo microscopes Ø48 compatible mount for standard eyepieces Lightweight optical glass for clear imaging Simple attachment, preserves working distance Faster, more reliable visual inspection for quality control The 1.5× magnification upgrade reduces reliance on repeated repositioning and rework by bringing small features into clearer view during the first pass. Integrated into a standard stereo microscope, this optical accessory extends visual resolution while maintaining the original optical axis, so measurement workflows and visual checks become more efficient. The result is higher throughput in inspection loops and fewer ambiguous findings during quality control. Designed for quick integration and steady handling Compatibility with a Ø48 mount means straightforward fitting to many common stereo microscope heads, allowing rapid retrofitting without optical overhaul. The W1.5 design keeps the working distance stable, retaining operator posture and tool clearance that are critical during soldering, micro-assembly or dissection tasks. Where system integration needs clarification, Metav IndustryLine provides specification guidance to ensure the attachment aligns with existing microscope configurations. Optical clarity that supports confident decisions Constructed to preserve contrast and minimise aberrations, the lens delivers a noticeably improved field of view at increased magnification, so small defects and fine structures are easier to evaluate. The enhanced image quality reduces eye strain and speeds decision-making for inspectors and technicians, turning visual checks into a more reliable stage of production and assembly. The accessory is therefore suited to electronics inspection, precision engineering and educational laboratories seeking consistent observational results. Practical applications and who benefits most Engineers, quality inspectors and lab technicians gain from the incremental magnification without adding complexity to their microscopes; the attachment is particularly useful for component inspection, entomology slides and detailed surface checks. Its compact form and standard mount make it a practical option where space and handling matter, enabling existing optical benches to deliver greater resolution with minimal additional training. Contact Metav Werkzeuge today to discuss how the W1.5 attachment (M503.242.3) can be integrated into existing microscope setups and to request technical advice from our specialists. Technical data SKU: M503.242.3 GTIN: 4054469145211 Manufacturer: Metav IndustryLine Key specifications Magnification: 1.5× Mount diameter: Ø48 Type: W1.5 Tariff code: 90119090 Features & compatibility Suitable for stereo microscope use Category: Optik Story trigger: optik FAQ What magnification increase does the lens provide? The attachment lens provides a 1.5× magnification increase, offering finer detail without replacing the microscope objective. Will the lens fit my existing microscope? The lens uses a Ø48 mount and is compatible with many stereo microscope heads; refer to the model specification or contact Metav Werkzeuge for confirmation. Does the attachment change the working distance? Designed as a W1.5 accessory, the lens maintains a stable working distance so handling and tool clearance remain largely unchanged during inspection. Is the product identified by a catalogue number? Yes, this accessory is listed as M503.242.3 (Metav IndustryLine). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø48 2.0x Stereo Microscope Auxiliary Objective, For Magnification Increase - Metav IndustryLine
Benefitting from a compact fit and clear optical performance, the 2.0× attachment lens delivers an immediate extension of inspection capability while preserving the ergonomic advantages of stereo optics; combine the 2.0× magnification with the Ø48 mounting to speed up visual checks and reduce objective changes. Order directly via Metav Werkzeuge or consult our specialists for compatibility advice. Attachment lens W2.0 – 2.0× optical accessory, Ø48 mount (Metav IndustryLine) The Attachment lens W2.0 is a precision optical accessory that increases the magnification of stereo microscopes by 2.0×, designed for use with Ø48 mm objective mounts and routine visual inspection tasks. 2.0× magnification factor Ø48 mm mount diameter Designed for stereo microscopes Compact optical enhancement Greater inspection reach without swapping objectives The 2.0× optical booster extends the usable magnification range of existing microscopes, enabling quicker transition between overview and detail inspection without frequent objective changes. By acting as an intermediate optical element, this attachment lens multiplies the effective magnification of the microscope’s objective while keeping the original optical axis and working distance largely intact. The result is a measurable gain in inspection throughput and fewer handling steps during quality control, which supports faster decision cycles on the shop floor. The compact Ø48 interface keeps the installation simple and repeatable. Practical compatibility and workflow advantages Engineered for integration with standard stereo systems, the W2.0 attachment lens fits into common optical trains and preserves the microscope’s ergonomic layout. This accessory is particularly useful where rapid alternation between magnification levels is required—inspection benches, incoming goods control and assembly verification benefit from the doubled visual resolution. The accessory’s construction supports stable alignment, which reduces adjustment time and ensures reproducible views across multiple operators. For specific system compatibility and to verify mechanical fit, Metav Werkzeuge can provide application guidance and parts matching. Confidence through tested optics and trusted supply The optical design focuses on delivering clear, contrast-rich images for routine and precision inspection alike, helping to avoid misinterpretation of small features. Supplied by Metav IndustryLine and distributed from Emmerich, this attachment lens is part of a range that embodies Metav’s commitment to making precision accessible: a broad product spectrum, a rigorous quality filter and dependable logistics for industry and trade. The combination of a defined magnification gain and a standard Ø48 mount offers a practical, low-risk upgrade path for laboratories and workshops seeking improved visual performance without major system overhaul. Request tailored compatibility advice from Metav Werkzeuge for the W2.0 attachment lens and secure prompt delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.242.4 GTIN: 4054469145228 Customs tariff number: 90119090 Data Magnification: 2.0× Mount diameter: Ø48 mm Weight: 6.15 kg Type designation: W2.0 Special features Category: Optik Suitable for: stereo microscopes SKU: M503.242.4 FAQ How does the attachment lens affect the microscope’s magnification? The attachment lens multiplies the microscope objective’s magnification by 2.0×, turning an existing magnification into twice its value without replacing objectives. Will the lens fit my stereo microscope? Compatibility depends on the objective mount; the accessory uses an Ø48 mm interface common to many stereo systems. Metav Werkzeuge can confirm fitment for specific microscope models. Does the W2.0 attachment lens change the working distance? Introducing an attachment element can alter the effective working distance slightly; the design of the W2.0 aims to preserve practical working distances for inspection tasks, minimising adjustments needed. Is the accessory suitable for laboratory and workshop use? Yes. The optical booster is designed for routine inspection and laboratory visual checks, improving detail recognition while remaining straightforward to integrate into established workflows. What identification numbers are available for ordering and inventory? The product is listed under SKU M503.242.4 and GTIN 4054469145228 for ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø51x60mm HD-Mini Microscope Camera 2 MP 1920x1080 60 fps HDMI Digital 0.37x C-Mount, 32 GB Included - Euromex
Benefit from a compact 2 MP sensor with HDMI output and a C‑Mount 0.37x adapter for immediate Full HD documentation; included 32 GB storage and calibration slide enable rapid deployment. Order the HD‑Mini VC.3023 directly via Metav Werkzeuge or consult our specialists if required. HD‑Mini VC.3023 – Microscope camera with HDMI and Sony CMOS sensor The HD‑Mini VC.3023 is a compact microscope camera engineered for live imaging and documentation in laboratory and inspection environments, offering direct HDMI output and C‑Mount compatibility. HDMI output for direct digital display 2 MP resolution, 1920 x 1080 Full HD 60 fps progressive scan for smooth live view Includes 32 GB SD card and C‑Mount adapter Faster inspection with direct Full HD output The HDMI interface and native 1920 x 1080 output reduce setup complexity by enabling immediate display on standard monitors, which streamlines documentation and speeds decision-making in quality control. A 2 MP sensor delivers sufficient detail for routine inspection tasks while keeping file sizes manageable, so capture workflows remain efficient without an elaborate imaging chain. The compact design and C‑Mount adaptability support integration with a wide range of optical heads and trinocular microscopes used in workshop and lab environments. Consistent image quality from a sensitive sensor A Sony CMOS 1/2.8" sensor with pixel size 2.9 x 2.9 µm and a sensitivity of 1300 mV/lux‑sec produces reliable images even at modest illumination levels, reducing the need for intense lighting during delicate inspections. The 12 bits colour depth and progressive scan mode preserve tonal gradation and avoid artefacts in moving subjects, while the 60 fps capability (mode-dependent) supports smooth live viewing for alignment and real‑time evaluation. These traits make the camera suitable for documentation, basic measurement tasks and instructional capture. Ready for immediate use and flexible storage options Delivery includes a 32 GB SD card, C‑Mount 0.37x adapter and adapter rings (30.0 and 30.5 mm to 23.2 mm), together with a calibration slide (10 mm/100), enabling quick setup and reliable scale reference for metrological tasks. Onboard SD storage supports expansion to 128 GB, allowing longer recording or larger image datasets without interruption. Power flexibility (100–240 Vac to 12 Vdc/1 A) and both HDMI and USB connectivity simplify integration into existing inspection benches and documentation stations. Robust operation in typical lab and workshop conditions Designed for stable performance in varied environments, the imaging module operates across a wide temperature range (-10–50°C) and 30–80% relative humidity, making it suitable for both controlled laboratory settings and less forgiving workshop areas. A measured noise level of 42 dB ensures unobtrusive operation during extended use. Progressive scanning and digital output provide dependable frame delivery for measurement work, while the compact mechanical dimensions (Ø51 x 60 mm) permit installation where space is limited. Discuss integration, accessory options and shipping with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and fast supply from our European stock Technical Data SKU: VC.3023 Manufacturer: Euromex Model series: HD‑Mini Product type: Microscope camera Digital output: HDMI Connection: HDMI Core specifications Resolution: 2 MP / 1920 x 1080 Sensor: Sony CMOS 1/2.8" Frame rate: 60 fps (Live view, mode-dependent) Pixel size: 2.9 x 2.9 µm Sensitivity: 1300 mV/lux‑sec Colour depth: 12 bits Format: 1/2.8" HDTV 1080p Noise level: 42 dB Operating temperature: -10–50°C Humidity: 30–80% Power supply: 100–240 Vac to 12Vdc/1A Features & accessories Progressive scan Storage: SD 32 GB included, up to 128 GB Included adapters: 30.0 and 30.5 mm to 23.2 mm Calibration slide 10 mm/100 C‑Mount adapter 0.37x Interface: HDMI and USB FAQ What microscopes is the camera compatible with? The HD‑Mini VC.3023 fits microscopes that accept C‑Mount connections; included adapter rings enable use with common trinocular and inspection heads. Is live video smooth enough for alignment tasks? Yes, the progressive scan sensor and 60 fps capability ensure smooth live viewing suitable for alignment and assembly inspection with the VC.3023. Can recordings be stored directly on the device? Recording to the included 32 GB SD card is supported; the camera accepts SD cards up to 128 GB for extended capture. How does the sensor perform under low light? The Sony CMOS 1/2.8" sensor with 2.9 x 2.9 µm pixels and sensitivity of 1300 mV/lux‑sec provides good performance at moderate illumination, reducing dependence on strong lighting. Is a calibration reference supplied for measurements? A calibration slide (10 mm/100) is included with the VC.3023 to facilitate scale verification and basic metrological checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
λ/4 Plate Slide for Transmitted Illumination Polarisation Models, IS.9612 - Euromex
Combining precise quarter-wave retardation with a quick-action slider, this accessory delivers reliable polarisation control for transmitted-light microscopy, ideal for contrast enhancement and workflow efficiency. Order the Euromex IS.9612 directly via Metav Werkzeuge or request advice from our consultants. λ/4 Plate in Slider for Transmitted-Light Illumination — iScope Polarisation Accessory (Euromex IS.9612) The λ/4 plate in slider for transmitted-light illumination for iScope polarisation models IS.9612 is an optical accessory enabling controlled retardation for polarisation contrast in transmitted-light microscopy. Quarter-wave retardation plate for polarisation contrast Compact slider mount for rapid insertion and removal Compatible with iScope polarisation series Designed to improve transmitted-light imaging consistency Enhanced contrast and controlled retardation for clearer imaging The accessory uses a quarter-wave plate (λ/4) to transform linear into circular polarisation or to introduce a defined phase shift between orthogonal polarisation components. This retardation reduces interference effects and improves visibility of birefringent structures in transmitted-light applications. For laboratory technicians and quality-control staff, the technical advantage is straightforward: better contrast with minimal modifications to the optical path. The slider design allows the optical element to be introduced without dismounting condenser assemblies, preserving alignment and saving time during routine inspections. Workflow advantage from the slider mechanism Fitting the plate in a slider mount provides immediate operational benefits: the element can be engaged or removed in seconds, which supports rapid switching between polarised and non-polarised transmitted-light modes. In production or classroom environments where throughput matters, this accessory reduces downtime and simplifies sample handling. The compact form factor integrates with iScope polarisation units and maintains a consistent optical position, so measurement reproducibility and imaging consistency are supported without complex recalibration. Built for dependable optical performance in microscopy tasks Manufactured to support polarisation contrast methods, the component contributes to repeatable imaging results across microscopy workflows. Its role in transmitted-light polarisation enhances the detection of stress patterns, crystalline structures and fine textural detail in materials and biological specimens. The accessory is therefore suited to research laboratories, industrial inspection benches and educational settings seeking improved visual differentiation of anisotropic features. For further specification details or to verify compatibility with a specific iScope variant, technical consultation is available. Secure the Euromex IS.9612 via Metav Werkzeuge for precise polarisation control and seamless integration into iScope setups; contact Metav Werkzeuge for tailored specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9612 SKU: IS.9612 Brand: Euromex Product type: Microscope illumination accessory Facts File size: 37693 Gallery filename: IS.9612.jpg Category path: Microscopy accessories › Contrast methods › Polarisation Special features Quarter-wave plate (λ/4) in slider for transmitted-light illumination Designed for iScope polarisation models Application: polarisation contrast in transmitted-light microscopy FAQ What is the primary function of the λ/4 plate in this accessory? The λ/4 plate in the Euromex IS.9612 introduces a defined phase retardation to enhance polarisation contrast in transmitted-light microscopy, improving visibility of birefringent details. Which microscope series is this slider designed for? The slider is designed for iScope polarisation models and fits the corresponding transmitted-light illumination path of that series. Can the plate be inserted and removed without realigning the microscope? Yes, the slider mount allows rapid insertion and removal with minimal disturbance to the optical alignment, supporting consistent imaging across sessions. What types of samples benefit most from using this polarisation accessory? Samples exhibiting birefringence—such as crystalline materials, polymers, or stressed transparent components—benefit substantially, as do biological specimens where polarisation reveals structural detail. Is additional calibration required after introducing the plate? Basic checks are recommended, but the slider is designed to maintain optical positioning so extensive recalibration is usually unnecessary. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com