18mm Wide Field 10x Microscope Eyepiece With Pointer - Euromex
Wide, comfortable viewing at 10× magnification with an 18 mm field number supports efficient specimen scanning; the integrated pointer eases orientation during teaching and routine inspection. Take advantage of dependable Euromex optics and a compact accessory that fits standard microscopes. Order the MicroBlue MB.6010 directly via Metav Werkzeuge or ask our consultants if needed. MicroBlue MB.6010 — Wide‑field 10× microscope eyepiece by Euromex MicroBlue MB.6010 is a wide‑field microscope eyepiece designed for clear, comfortable observation in teaching, laboratory and inspection environments. Wide field 18 mm field number 10× magnification for detailed observation Built-in pointer for easy specimen marking Larger field of view for faster specimen scanning A wide‑field eyepiece with an 18 mm field number provides a noticeably broader visible area than standard oculars. The field number describes the diameter of the viewable image at the eyepiece: a higher value means more of the specimen is visible without moving the stage. For routines such as slide screening, teaching demonstrations or quality checks, this translates into fewer adjustments and a more efficient workflow. The broader field also reduces eye fatigue during extended sessions by offering a more natural viewing window. Precise 10× magnification that works with objectives The eyepiece supplies 10× magnification, which combines with the chosen objective lens to determine overall magnification. This arrangement allows familiar control over image size while preserving optical clarity. For users less familiar with microscopy, the concept is simple: the eyepiece multiplies the objective’s power, so pairing a 10× ocular with a 40× objective results in a 400× total magnification. The design focuses on delivering a sharp, stable image rather than adding unnecessary complexity, making it suitable for education, laboratory checks and routine inspections. Integrated pointer for clear orientation and teaching An integrated pointer inside the eyepiece provides a practical aid for locating or highlighting specific features on a slide. In educational settings the pointer supports quick demonstration of structures; in inspection tasks it simplifies documentation and communication between operators. The pointer is a direct, low‑technology solution that reduces the need for annotation on digital captures and facilitates faster decision making during microscopy work. Trusted optics for everyday microscopy tasks Originating from the MicroBlue series, this eyepiece reflects Euromex’s experience in microscope accessories and is aimed at users who require reliable visual performance without excessive complexity. The component is compact and intended to fit standard eyepiece tubes used in many educational and industrial microscopes. The emphasis is on straightforward functionality: notable optical clarity, a wide field, and a functional pointer that together streamline inspection and instruction. For bespoke compatibility checks or additional specifications, technical advisors are available to provide the required details. Contact Metav Werkzeuge for detailed compatibility advice and to arrange supply of the Euromex MicroBlue MB.6010 eyepiece; Metav’s consultants can confirm fitment and delivery from Emmerich. Technical data Article number: MB.6010 SKU: MB.6010 Brand: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field number: 18 mm Special features Wide field (WF) design Integrated pointer MicroBlue series For microscopes FAQ What magnification does this eyepiece provide? The MicroBlue MB.6010 eyepiece provides 10× magnification, which multiplies the objective lens to give the final magnification used in observation. What does an 18 mm field number mean in practice? An 18 mm field number indicates a wide visible diameter through the eyepiece, allowing more of the specimen to be seen without moving the stage and reducing the need for frequent repositioning. Is the pointer suitable for teaching demonstrations? Yes, the integrated pointer in the MicroBlue MB.6010 is intended precisely for orientation and demonstration, making it useful in teaching and collaborative inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Wide Field Eyepiece WF 10x/18mm, Wide Field - Euromex
Take advantage of a 10x optical step combined with a wide-field 18 mm field number to speed up visual inspection and reduce slide repositioning; the result is more efficient observation and steadier documentation. Order the eyepiece directly via Metav Werkzeuge or ask the consultants for specification advice. Microscope eyepiece AE.5572 — 10x wide-field eyepiece by Euromex (18 mm) Microscope eyepiece AE.5572 is a wide-field 10x ocular designed for general microscopy and educational or routine inspection tasks, offering an extended 18 mm field number for broader sample coverage 10x magnification Wide-field: 18 mm field number Part number AE.5572 Faster overview for routine inspection and teaching The combination of 10x magnification and a wide-field optical design substantially increases the visible sample area per glance, which reduces the need for frequent stage movement during inspections. The 18 mm field number describes the diameter of the exit pupil and therefore the size of the observable field at the eyepiece; a larger field number means more of the specimen is visible without scanning. This advantage translates directly into time savings in repetitive workflows and more comfortable observation during extended sessions in laboratories and classrooms. Clearer image interpretation for documentation and measurement A wide-field ocular improves situational awareness when documenting features or making comparative measurements under the microscope. By increasing the apparent field, the eyepiece supports faster orientation on slides and helps the operator keep reference structures in view while switching objectives. The eyepiece is manufactured by Euromex, delivering consistent optical characteristics that aid in reproducible visual assessment and clearer photographic capture when paired with appropriate camera adapters. Practical specification for integration into inspection setups The eyepiece provides a straightforward specification for procurement and inventory: 10x magnification with an 18 mm field number, referenced under the internal part AE.5572. This simple, standardised specification assists engineers and technicians in selecting compatible optics for routine inspection benches and teaching microscopes, enabling predictable results across multiple instruments. The design supports efficient workflows and reduces time spent on operator training by offering familiar magnification and a generous viewing field. For supply and expert advice on integrating the Euromex AE.5572 eyepiece into metrology or teaching setups, contact Metav Werkzeuge for order placement and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: AE.5572 SKU: AE.5572 Type: Microscope eyepiece Manufacturer: Euromex Facts Magnification: 10x Field number: 18 mm Special features Wide-field design WF 10x/18 mm Source: Education PDF — p.13 FAQ What does the 18 mm field number mean for observation? The 18 mm field number indicates the diameter of the eyepiece’s exit pupil and therefore the width of the visible field; with the AE.5572 this provides a broader view that reduces the need to move the specimen during inspection. Which magnification is provided by this eyepiece? The eyepiece delivers 10x magnification, suitable for general observation and as a complement to standard objective lenses in teaching and routine inspection environments. Is this eyepiece suitable for educational laboratories? Yes, the wide-field characteristic and standard 10x magnification make the AE.5572 well suited to teaching microscopy and training scenarios where a larger apparent field improves orientation and ease of use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 10x Eyepiece EWF, 20 mm Field Number - Euromex
Take advantage of the 10x magnification and 20 mm field number for efficient specimen inspection; the eyepiece offers a wide, comfortable view that speeds up routine observation and reduces eye fatigue. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility guidance. Microscope eyepiece iScope IS.6010 — 10x magnification, 20 mm field number (Euromex) Mikroskopokular iScope IS.6010 is an eyepiece designed for general microscopy applications, combining clear 10x magnification with a broad 20 mm field number for educational and laboratory use 10x magnification for detailed observation 20 mm field number for a wide field of view Compatible with the iScope series by Euromex Faster, clearer routine inspection with 10x optics The 10x ocular delivers reliable enlarging power for standard microscopy tasks, enabling precise observation of cell structures, prepared slides and general specimens. With consistent optical performance, this eyepiece supports repeatable results and improved workflow efficiency in teaching labs and quality-control benches. The enlarged image is produced without additional complexity, which helps maintain a steady pace during repeated inspections while keeping operational demands low. Wider field number reduces scanning time and eye strain A 20 mm field number corresponds to a larger usable viewing circle, which means fewer movements are required to scan a specimen and less frequent repositioning of slides. For technicians and educators, this translates into quicker orientation on the sample and reduced visual fatigue during long sessions. The field number is a standard optical specification that directly affects the apparent field of view; a higher value such as 20 mm provides a noticeably broader perspective compared with lower-FN eyepieces. Practical compatibility and consistent optical quality Belonging to the iScope series, the ocular is intended as an accessory for microscopes that accept standard eyepieces of the iScope family. Manufactured by Euromex, the component is presented as a straightforward upgrade or replacement option for general microscopy setups. The eyepiece design focuses on ease of integration and dependable imaging rather than complex adjustment, making it suitable for educational environments and routine laboratory applications where clarity and repeatability are the primary requirements. Contact Metav Werkzeuge for tailored advice on the Euromex iScope IS.6010 eyepiece — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fit and optical needs Technical Data Article number: IS.6010 SKU: IS.6010 Manufacturer: Euromex Model series: iScope Product type: Microscope eyepiece Facts Magnification: 10x Field number: 20 mm Special features EWF 10x/20 mm eyepiece Suitable for microscopes (eyepiece accessory) Source: Education PDF S.24; Life Science PDF S.16 FAQ What magnification does the eyepiece provide? The Euromex iScope IS.6010 eyepiece provides 10x magnification, suitable for routine microscopy and educational tasks. How wide is the visible field with this eyepiece? The eyepiece features a 20 mm field number, which yields a wide apparent field of view for faster specimen scanning. Is this eyepiece suitable for teaching laboratories and general life-science use? Yes, the design and specifications of the iScope IS.6010 are aligned with educational and general life-science applications where a balance of clarity and ease of use is required. Does the eyepiece belong to a particular product series? The ocular is part of the iScope series by Euromex and is described as an EWF 10x/20 mm eyepiece in the product documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm EWF Extra Widefield 20x/22 Eyepiece for DZ Series, 20x Magnification - Euromex
Take advantage of the combination of 20x magnification, an extra wide field (field number 22) and direct compatibility with DZ-series stereomicroscopes for faster, more reliable visual inspections; order via Metav Werkzeuge or contact our consultants for tailored advice. EWF Extra Wide Field 20x/22 Eyepiece DZ.3020 – Euromex microscope eyepiece with wide field The EWF Extra Wide Field 20x/22 eyepiece is a high-magnification ocular designed for visual inspection and documentation tasks on DZ-series stereomicroscopes, offering a broader view for precision work in laboratories and workshops. 20x magnification for detailed inspection Extra wide field (Field number 22) for a broader view Compatible with DZ-series stereomicroscopes Sharper detail for efficient quality control The ocular provides 20x magnification that supports clear identification of fine structures and defects, reducing inspection time in repetitive tasks. The extra wide field increases the visible area per glance, which lowers the need for frequent stage repositioning and therefore improves overall throughput. As an optical accessory intended for metrology and inspection, the eyepiece combines straightforward mechanical compatibility with optical performance to help technicians reach consistent results in workshops and small-scale laboratories. Comfortable viewing that reduces operator fatigue With a wide apparent field and ergonomic optical design, this eyepiece delivers a more relaxed viewing experience during extended sessions. The broader field reduces eye strain and shortens the time spent scanning samples, which is particularly beneficial for quality assurance and component sorting tasks. The ocular’s design is tailored to suit stereomicroscopes used in electronics, watchmaking and precision engineering, where comfortable, extended use improves operator consistency and reduces human error. Seamless integration and practical workshop benefits Compatibility with the DZ-series ensures easy replacement or upgrade of existing optics without additional adapters. The accessory is optimised for routine inspection workflows, supporting visual checks, sample preparation and documentation. For projects requiring additional technical information or measurement parameters, technicians can request further specifications; Metav Werkzeuge provides local procurement and consultancy to ensure the eyepiece meets application needs and integrates smoothly into existing setups. For precise visual inspection and workshop integration, contact Metav Werkzeuge for expert advice on fitting and procurement of the Euromex EWF Extra Wide Field 20x/22 eyepiece (SKU DZ.3020) — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DZ.3020 SKU: DZ.3020 Product type: microscope eyepiece Manufacturer: Euromex Facts Magnification: 20x Packaging: 1 piece Special features Extra wide field, Field number 22 Compatible with DZ-series stereomicroscopes FAQ What magnification does this eyepiece provide? The eyepiece offers 20x magnification, which is suitable for detailed visual inspection and component-level examination when used with a compatible stereomicroscope. Is the eyepiece compatible with DZ-series microscopes? Yes, the EWF Extra Wide Field 20x/22 eyepiece (DZ.3020) is designed specifically for DZ-series stereomicroscopes, ensuring straightforward mechanical fit and optical alignment. What advantage does the extra wide field provide? The extra wide field (field number 22) increases the visible area, reducing the need to move the sample frequently and supporting faster, less fatiguing inspection workflows. Can this eyepiece be used for documentation or imaging? The wide field and high magnification support visual documentation tasks; however, integration with imaging systems depends on the microscope’s camera ports and adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm WF Precision Microscope Eyepiece 12mm Field, Ø30mm Tube - Euromex
Product data error: manufacturer's entry "Euromex" is not listed in the approved manufacturer directory, so a validated product description cannot be generated, which means that the system is unable to verify the accuracy or authenticity of the product details provided, potentially leading to discrepancies or issues in the cataloguing process, and it is recommended to cross-check the manufacturer's information against the authorised directory to ensure compliance with the established standards and avoid any potential misrepresentation or errors in the product database, as maintaining accurate and verified data is crucial for operational efficiency and customer trust in the system.
20mm Wide Field Eyepiece 20x/9mm WF, Wide Field Optics - Euromex
Take advantage of the combination of clear 20x magnification and a 9 mm wide field to speed visual inspections and classroom demonstrations while keeping integration simple; order the ocular via Metav Werkzeuge or contact our advisors for specification support. MicroBlue MB.6020 microscope eyepiece — 20x, 9 mm wide-field The MicroBlue MB.6020 is a wide-field 20x microscope eyepiece designed for routine laboratory and educational microscopy where an extended viewing area improves workflow and observation comfort. Wide-field WF design for broader view 20x magnification for detailed observation 9 mm field number for larger field of view Wider view for faster visual tasks A wide-field eyepiece like this one increases the observable area without changing the objective lens, meaning more of the specimen is visible at once. The 9 mm field number translates into a noticeably larger field of view, which reduces the need for frequent stage adjustments during inspections or teaching demonstrations. This benefit speeds up repetitive visual tasks in workshops and classrooms while keeping the optical setup straightforward. Strong detail with moderate magnification The 20x power provides a useful balance between magnification and usability: details become clearer than with standard low-power oculars, yet the image remains manageable for longer observation periods. For routine measurements, parts inspection and student use, this magnification enhances resolution sufficiently to identify small features while preserving context within the view. The optical design supports visual clarity without requiring complex calibration. Practical compatibility and application As a dedicated microscope eyepiece, the unit is intended for general microscopy applications in education and basic laboratory work. The wide-field characteristic makes it especially suited to situations where quick orientation and broad specimen overview are advantages, such as specimen sorting, preliminary screening and instructional demonstrations. The eyepiece is a practical choice when an extended view is more beneficial than very high magnification. Clear specifications made usable The eyepiece is specified with two core values that matter to users: 20x magnification and a 9 mm field number. These objective figures provide an immediate basis for equipment matching and purchasing decisions. For buyers less familiar with optical terms: the field number denotes the diameter of the visible image circle measured in millimetres; a larger number equals a larger visible area at the same magnification, which is why a 9 mm value is advantageous for general-purpose viewing. Contact Metav Werkzeuge today for tailored advice on integrating the MicroBlue MB.6020 eyepiece into existing microscope setups and for delivery and technical support from Emmerich Technical data Article number: MB.6020 SKU: MB.6020 Model series: MicroBlue Product type: Microscope eyepiece Manufacturer: Euromex Facts Magnification: 20x Field number: 9 mm Special features Wide-field WF design Category: For microscopes / microscopy accessory FAQ What does the field number 9 mm mean for observation? The field number of 9 mm indicates a relatively large visible image circle; with the MicroBlue MB.6020 this delivers a broader field of view, reducing the need for constant stage movement during inspections. Is this eyepiece suitable for teaching environments? Yes, the wide-field characteristic and 20x magnification make the ocular well suited to classroom demonstrations and routine laboratory teaching where rapid orientation and comfortable viewing are priorities. Can the MicroBlue MB.6020 be used for basic parts inspection? The 20x magnification is appropriate for preliminary screening and visual inspection tasks that require more detail than low-power oculars while keeping the specimen context visible. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Widefield Eyepiece 12mm Field, Ø30mm Tube - Euromex
Benefit from the combination of an expanded widefield view and precise 20x magnification to speed sample inspection and reduce refocusing. The 12 mm apparent field provides more context per view while the Ø 30 mm tube ensures straightforward compatibility with standard microscopes. Order the Euromex Widefield WF 20x/12 mm eyepiece DX.6020 directly via Metav Werkzeuge or ask our consultants if needed. Euromex Widefield WF 20x/12 mm Eyepiece DX.6020 — 20× magnification, Ø 30 mm tube A Euromex Widefield WF 20x/12 mm eyepiece that delivers an expanded field of view for laboratory and educational microscopes with a Ø 30 mm tube, improving overview and throughput. Widefield WF 20× magnification, sharp detail 12 mm apparent field for broader observation Ø 30 mm tube for standard microscope fittings High-quality optics by Euromex for consistent results Faster inspections with a wider observation area The widefield design of this eyepiece provides an expanded field of view that speeds visual scanning of slides and specimens. With 20x magnification combined with a 12 mm apparent field, operators can locate features more quickly and perform comparative assessments with fewer adjustments. This results in improved throughput for routine checks and educational demonstrations where time and clarity matter. The optical layout prioritises a broad scene while retaining the resolution necessary for detailed observation. Reduced eye fatigue and steady image perception A widefield eyepiece with a generous apparent field reduces eye movement and head repositioning during extended sessions, which helps to lower operator fatigue in busy laboratories or teaching environments. The magnification level balances close detail with contextual overview, making the ocular suitable for both teaching and inspection tasks. The optical characteristics support comfortable observation over longer periods, maintaining image stability and steady perception when moving between specimens or when switching objectives. Easy integration into existing microscope setups Designed for a Ø 30 mm tube, the eyepiece integrates easily with microscopes that accept standard 30 mm oculars, enabling a straightforward swap without the need for adapters. The Euromex optical quality ensures consistent image reproduction across lenses and objectives, which simplifies calibration and reduces variability in routine measurements. Compatibility with commonly used microscope fittings supports flexible deployment across multiple workstations or shared teaching benches. For reliable, repeatable microscopy performance, choose the Euromex Widefield WF 20x/12 mm eyepiece and request fulfilment or advice via Metav Werkzeuge — supplied from Emmerich with expert guidance when required Technical Data Article number: DX.6020 SKU: DX.6020 Manufacturer: Euromex Product type: Microscope eyepiece Label: Widefield WF 20x/12 mm eyepiece, Ø 30 mm tube DX.6020 Image URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1f/a5/f1/6a/6af1a51fd8ecf2f60acae143/DX.6020.jpg Facts Magnification: 20x Apparent field: 12 mm Tube diameter: Ø 30 mm Features Widefield WF optical design Compatible with standard 30 mm eyetubes Suitable for laboratory and educational use Manufacturer: Euromex FAQ What microscopes is this eyepiece compatible with? This eyepiece is compatible with microscopes that accept a Ø 30 mm eyetube; the Euromex Widefield WF 20x/12 mm eyepiece (DX.6020) fits standard 30 mm fittings. How does the 12 mm field affect observation? A 12 mm apparent field provides a wider visual context per view, enabling quicker scanning and fewer refocusing steps compared with narrower-field oculars. Is the magnification suitable for teaching purposes? Yes, the 20x magnification offers a balance of detail and overview, making the eyepiece well suited for teaching benches and routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Eyepiece Ø30 Field 14mm For Stereo Microscopes - Metav IndustryLine
Take advantage of 20× magnification and a Ø30 mm barrel for reliable, high‑contrast inspection; the compact design with a 14 mm field of view supports precise visual checks and repeatable results. Order the SWH20X eyepiece directly via Metav Werkzeuge or contact our consultants for application advice. SWH20X eyepiece — 20× magnification, Ø30 mm barrel for stereo microscopes The SWH20X eyepiece provides 20× magnification for stereo microscopes, delivering compact, high‑resolution viewing for inspection and assembly tasks. 20× magnification for fine detail Ø30 mm barrel diameter for standard mounts 14 mm field of view for accurate visualisation High magnification that improves inspection accuracy The 20× magnification offers a clear enlargement that helps to detect fine features and surface defects without complex optics. With a 14 mm field of view, this eyepiece balances magnification and observable area, making it easier to compare component features and reduce rework. The construction supports stable imaging, ensuring that visual checks are faster and more reliable, which contributes directly to improved quality control and reduced inspection time. Designed for straightforward integration into stereo setups Compatibility is simplified by the Ø30 mm barrel diameter, which fits common stereo microscope eyetubes. The compact form factor enables quick swapping between eyepieces and preserves the optical alignment of the main instrument. Integration with existing microscopy systems keeps downtime to a minimum and supports flexible workflows in both laboratory and workshop environments. For specific system pairings, Metav Werkzeuge can advise on mechanical fit and optical matching. Practical handling that supports daily workflows Lightweight and compact, this eyepiece is easy to handle during repetitive inspection tasks, reducing operator fatigue and maintaining measurement consistency. The optical design prioritises contrast and clarity, helping users make confident visual decisions during assembly, QA or research. The combination of magnification, field of view and standard mounting makes the eyepiece a pragmatic choice when balancing resolution needs and operational efficiency. Contact Metav Werkzeuge for compatibility checks or a quotation for the Metav IndustryLine SWH20X eyepiece with 20× magnification and Ø30 mm barrel Technical data SKU: M503.241.3 GTIN: 4054469145143 Type: SWH20X Category: Optics Facts Magnification: 20× Barrel diameter: Ø30 mm Field of view: 14 mm Weight: 0.5 kg Tariff number: 90119090 eClass: 21160592 Special features Designed for stereo microscopes Compact eyepiece for high‑magnification inspection Category tag: Optik Brand: Metav IndustryLine FAQ Is the SWH20X eyepiece compatible with standard stereo microscope mounts? The SWH20X eyepiece from Metav IndustryLine uses a Ø30 mm barrel and is intended for use with stereo microscopes featuring the corresponding eyetube diameter; check the instrument specification to confirm fit. What does the 14 mm field of view mean in practice? A 14 mm field of view indicates the visible diameter through the eyepiece at the chosen magnification, enabling a balance between magnified detail and the area visible for inspection with the SWH20X eyepiece. Will the 20× magnification affect depth perception in stereo viewing? Higher magnification increases apparent detail while preserving stereo depth cues when used with compatible stereo microscopes; the SWH20X eyepiece is designed to retain sufficient depth perception for assembly and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x WF Eyepiece 11 mm Field Number, BioBlue.Lab - Euromex
Take advantage of the precise 20x magnification and the wide 11 mm field number for efficient visual inspection and documentation. The WF design delivers a larger usable image area while maintaining optical clarity, supporting faster analysis and fewer retakes. Order via Metav Werkzeuge or consult our specialists for application advice. BioBlue.Lab BB.6020 microscope eyepiece — WF 20x/11 mm (Euromex) A BioBlue.Lab BB.6020 microscope eyepiece is designed for laboratory and inspection microscopy, offering high magnification and a wide field number for detailed sample observation Wide-field WF design for extended view 20x magnification for detailed observation Field number 11 mm for larger field of view See finer detail without compromise The 20x power of this eyepiece provides substantial enlargement for close inspection of structures and fine features, making it suitable for visual tasks that require enhanced resolution. By combining higher magnification with a wide-field optical design, the ocular supports clearer interpretation of small details while keeping the image steady. This reduces the need for frequent re-positioning and speeds up inspection workflows, an advantage in both teaching and quality-control environments. The construction focuses on optical performance to ensure observations are reproducible and reliable. Work faster with a larger usable image area A field number of 11 mm means a visibly broader field of view, which allows operators to observe more of the specimen at once. This wider apparent view reduces the time spent scanning and repositioning samples during routine checks, improving throughput in repetitive tasks. For applications where context around a detail matters—such as materials inspection or sample sorting—the expanded view aids quicker decision-making and fewer interruptions, supporting leaner processes in the lab or workshop. Practical advantages for laboratories and microscopy setups The WF designation (wide-field) indicates the eyepiece is optimised for comfortable observation under elevated magnification. For users transitioning from lower-power oculars, the combination of 20x and 11 mm balances magnification with a usable image circle, minimising eye strain during extended sessions. Optical terminology such as "field number" describes the diameter of the viewable image in millimetres; a larger number directly correlates with a wider visible area through the eyepiece. This clarification helps purchasers assess whether the ocular fits their inspection and documentation needs without requiring specialised optical knowledge. For tailored advice on the Euromex BioBlue.Lab BB.6020 and to arrange supply from our Emmerich warehouse, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with technical suitability and delivery options. Technical data Article number: BB.6020 SKU: BB.6020 Brand: Euromex Model series: BioBlue.Lab Product type: Microscope eyepiece Core data Magnification: 20x Field number: 11 mm Special features WF wide-field eyepiece For microscopes Source: Education PDF-S. 16; Life Science PDF-S. 12 FAQ What does the field number 11 mm mean in practice? A field number of 11 mm denotes the diameter of the visible image circle seen through the eyepiece; the larger number produces a broader apparent field, so the BB.6020 presents more of the specimen without moving the slide. Is 20x magnification suitable for inspection tasks and teaching? Yes, the 20x power of the BB.6020 is designed for detailed observation and is often used where higher resolution is needed; it complements lower-power oculars for stepwise examination and documentation. What does the WF designation indicate about the eyepiece? WF indicates a wide-field design; the WF 20x/11 mm eyepiece offers a larger apparent field than a standard ocular at the same magnification, improving situational awareness during inspection. Can the eyepiece improve workflow speed in quality-control settings? The combination of 20x magnification and an 11 mm field number reduces the need for constant repositioning and supports more efficient scanning, which can speed up repetitive inspection tasks. How should the eyepiece be handled to preserve optical quality? Handle the ocular by its barrel, avoid touching lens surfaces, and store in a dust-free case; regular cleaning with suitable lens tissue maintains the performance of the BB.6020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x WF Eyepiece 11mm Field Number, 20x Magnification - Euromex
Secure accurate routine inspections with 20× magnification and a generous 11 mm field number for faster sample evaluation and reduced repositioning. Combine optical consistency and wide-field observation for efficient microscopy workflows; purchase via Metav Werkzeuge or consult their specialists for tailored advice. bScope BS.6020 microscope eyepiece — 20× magnification, 11 mm field number The bScope BS.6020 is a wide-field microscope eyepiece engineered to deliver clear, high-contrast observation for education, laboratory routines and quality checks. Wide-field WF 20×/11 mm optics 11 mm field number for larger view Precisely defined magnification 20× Part of the bScope line by Euromex Faster inspections with a wider field of view A generous 11 mm field number means a noticeably broader visible area compared with standard eyepieces, reducing the need for constant stage movement during scans. The wide-field (WF) design increases situational awareness when examining extended specimens or performing routine checks, which shortens inspection times and improves throughput. Operators benefit from clearer peripheral detail while maintaining a familiar 20× working magnification, making visual comparison and documentation more efficient without sacrificing image quality. Consistent optical performance for repeatable results Defined magnification and aprecision** optical design promote repeatability across measurements and visual assessments. The stable magnification characteristic supports consistent imaging when creating records or comparing samples over time, which is crucial in educational settings and standardised laboratory procedures. The WF optics assist in maintaining even illumination and contrast across the field, so routine observations remain dependable and simple to reproduce for reporting and quality control. Robust handling and straightforward workflow integration Designed as part of a series intended for regular use, the eyepiece offers practical robustness for workshops and teaching labs alike. The construction emphasises straightforward handling and maintenance, contributing to a long service life under normal working conditions. Metav’s presence in Emmerich functions as a quality filter for products like this, ensuring dependable supply and practical advice for integration into existing microscope setups; guidance is available if additional technical data is required. The result is a compact optical upgrade that blends durable design with everyday usability and measurable productivity benefits. For detailed advice on integrating the Euromex bScope BS.6020 into an existing microscope or to request supply information, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for reliable, expert support. Technical Data Article number: BS.6020 SKU: BS.6020 Series: bScope Type: Microscope eyepiece Facts Magnification: 20× Field number: 11 mm Designation: WF 20×/11 mm eyepiece Special features Wide-field (WF) optical design Brand: Euromex Category: For microscopes FAQ What magnification does this eyepiece provide? The eyepiece offers a 20× magnification, specified as WF 20×/11 mm for the Euromex bScope BS.6020 (SKU BS.6020). How large is the visible field with this eyepiece? The field number is 11 mm, which yields a wider visible area than many standard eyepieces and supports quicker specimen scanning. Is the bScope BS.6020 suitable for teaching and routine laboratory work? Yes, the WF design and defined magnification make the bScope BS.6020 well suited to educational use and routine laboratory inspections where consistent visual performance is required. Does the eyepiece require special maintenance? Maintenance is straightforward: keep lenses clean and store the eyepiece dust‑free. The construction of the bScope series is intended for regular use with normal workshop or laboratory care. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Wide Field Microscope Eyepiece 10 mm Field Number - Euromex
Benefit from consistent 20x magnification and a 10 mm field number for wider, clearer observation in stereomicroscope work; the robust wide-field optics support dependable classroom and laboratory imaging. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility advice. EduBlue ED.6020 Microscope eyepiece — 20x, 10 mm field (Euromex) The EduBlue ED.6020 eyepiece delivers 20x wide-field viewing for stereomicroscopes, optimised for educational settings and routine laboratory inspection. Wide-field 20x magnification 10 mm field number for broader view Designed for stereomicroscopes Euromex EduBlue series optics Precision viewing with wide-field optics for consistent results The EduBlue ED.6020 is engineered to provide precise 20x magnification combined with a 10 mm field number, which increases the observable area without sacrificing detail. A larger field number means that more of the specimen is visible at once; this reduces the need for constant stage adjustment and supports faster, more reliable inspections. For users who evaluate multiple samples in sequence, the balanced combination of magnification and field of view translates into higher throughput and fewer interruptions. The optical design is described here in practical terms so that non-specialists can appreciate the direct benefit: a broader view that keeps the specimen in focus longer during manipulation and teaching demonstrations. Practical advantages for education and routine laboratory use As a wide-field eyepiece, this ocular improves visual comfort and reduces eye strain during prolonged observation—an important consideration in teaching labs and quality control tasks. The increased visible area aids demonstration work, enabling groups to track features more readily when switching between objectives or different specimens. The eyepiece’s specification is straightforward to assess: 20x indicates the magnification factor applied to the microscope’s intermediate image; the 10 mm field number quantifies the diameter of the usable image circle seen through the eyepiece. Together, these parameters support clearer demonstrations and more efficient routine inspections, making the accessory well suited for trainers, technicians and educators who require reproducible visual results. Integration, durability and what to expect from the optics Installation is typically simple when used with compatible stereomicroscopes: the ocular is intended to fit standard eyepiece tubes and to perform as part of the broader EduBlue optical system. The wide-field configuration helps maintain peripheral sharpness, which is especially useful when aligning parts or scanning larger samples. Optical maintenance is minimal—regular lens cleaning with suitable tissue and a small amount of lens cleaner preserves image quality—so operational downtime is low. Reliability and consistent imaging are the practical benefits emphasised by this eyepiece: better inspection speed and reduced rework in routine tasks. For buyers seeking predictable, classroom-ready optics, the EduBlue series represents an engineered balance of clarity, usability and workflow advantage. For advice on fitment or to procure the Euromex EduBlue ED.6020 through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and order handling Technical data Article number: ED.6020 SKU: ED.6020 Manufacturer: Euromex Model series: EduBlue Product type: Microscope eyepiece Facts Magnification: 20x Field number: 10 mm Special features For stereomicroscopes Wide-field eyepiece EduBlue optics series FAQ Is the eyepiece compatible with standard stereomicroscopes? The EduBlue ED.6020 is designed for use with stereomicroscopes and fits standard eyepiece tubes where a 20x wide-field ocular is required. What does the 10 mm field number mean in practice? A 10 mm field number indicates the diameter of the usable image circle seen through the eyepiece; for the ED.6020 this produces a broader visible area at 20x magnification, aiding inspection and demonstrations. Can the ED.6020 be used for teaching and group demonstrations? Yes, the combination of 20x magnification and a 10 mm field number makes the eyepiece well suited to educational settings where a wider field aids observation and reduces the need for constant repositioning. How should the eyepiece optics be maintained? Routine care for the ED.6020 includes gentle cleaning with optical tissue and suitable lens cleaner; avoid harsh chemicals and always store the eyepiece dust-free when not in use. Is the product referenced by a specific model code for ordering? The eyepiece is listed under the code ED.6020; referencing this SKU simplifies ordering and compatibility checks for the Euromex EduBlue microscope eyepiece. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Wide Field Microscope Eyepiece 11.5mm Field Number - Euromex
Take advantage of a 20x wide-field solution with an 11.5 mm field number for efficient visual inspection and comfortable observation; the compact design ensures straightforward integration into microscopy workflows. Order directly via Metav Werkzeuge or consult our specialists for application advice. Microscope eyepiece AE.5582 — Euromex wide-field ocular, 20x / 11.5 mm A Microscope eyepiece AE.5582 is designed to deliver 20x magnification and a wide 11.5 mm field number for laboratory and educational microscopy applications Wide-field eyepiece — 20x magnification Field number 11.5 mm for extended view Euromex quality, model AE.5582 Enhanced resolution for routine inspections The 20x magnification offers a clear step-up from standard eyepieces, enabling precise observation of fine sample details without the need for digital enhancement. With a wide-field optical design, the ocular reduces the need for excessive stage scanning, which streamlines repetitive inspection tasks in teaching labs and basic research. This higher working magnification supports confident visual assessment and helps to reduce measurement uncertainty in everyday microscopy work. Faster overview through an expanded visual field A field number of 11.5 mm significantly widens the visible area, so more of the specimen is visible at once. This advantage translates into fewer repositioning steps during sample screening and a smoother workflow when examining slides or prepared samples. The wide apparent field improves situational awareness at the eyepiece and shortens the time required to locate features, making the eyepiece particularly suitable for high-throughput observation routines. Practical fit and reassurance in quality Manufactured by Euromex, the ocular is specified as a wide-field eyepiece optimised for clarity and ease of use. The compact form factor and optical specification mean the eyepiece integrates well with common educational and laboratory microscopes that accept standard ocular tubes. Confidence in consistent performance is supported by the clear optical parameters provided, which simplify selection and replacement decisions for instrument managers and procurement specialists. For a reliable upgrade to your inspection kit, contact Metav Werkzeuge for availability and application guidance — Metav stands for the democratisation of precision and can advise on suitable microscope configurations; email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data Article number: AE.5582 Manufacturer: Euromex Product type: Microscope eyepiece Data Magnification: 20x Field number: 11.5 mm Wide field: WF 20x/11.5 mm Special features Label: Mikroskopokular AE.5582 Category: For microscopes (microscopy accessories) Source: Education PDF, p.13 FAQ What magnification does this eyepiece provide? The Euromex microscope eyepiece AE.5582 delivers 20x magnification, suitable for detailed visual inspection in teaching and laboratory settings. What is the visible field with this ocular? The eyepiece features a field number of 11.5 mm, giving a notably wider apparent field to view more of the specimen at once. Is the AE.5582 compatible with standard microscopes? The AE.5582 is a wide-field eyepiece from Euromex and is intended for use with microscopes that accept standard ocular tubes; confirm tube diameter and mechanical fit with the instrument manual. Where can application advice or technical details be requested? Application guidance and additional technical information are available through Metav Werkzeuge; the AE.5582 (SKU AE.5582) can be discussed with their specialists for system compatibility. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm EWF Eyepiece 10x With Dioptre Adjustment - Euromex
Take advantage of the combination of 10× magnification, a 22 mm wide field of view and integrated diopter adjustment for faster, more reliable visual inspections; order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility advice. EWF 10x/22 mm Eyepiece AX.6010 – Wide-field 10× ocular with diopter adjustment The EWF 10x/22 mm eyepiece AX.6010 is a wide-field microscope eyepiece designed for use with the Achios‑X‑Observer series, offering clear, comfortable observation and simple focal fine-tuning. 10× magnification for detailed inspection 22 mm wide field of view Integrated diopter adjustment Designed for Achios‑X‑Observer systems Faster inspections with a true wide field The combination of 10× magnification and a 22 mm field of view delivers a noticeably larger apparent image, enabling quicker scanning of specimens and components without sacrificing detail. The wide-field design reduces the need for frequent stage movement during routine checks, which improves throughput in quality control and inspection tasks. The optical characteristics are aimed at delivering high-contrast optics for clear edge definition, so operators can identify features and defects more efficiently. Practical compatibility and straightforward handling Compatibility with the Achios‑X‑Observer system ensures a seamless fit and repeatable alignment in modular microscope setups. The eyepiece is configured to be exchanged quickly between observation tubes, supporting flexible workflows in laboratories, education and light industrial inspection. The built-in diopter adjustment allows individual users to achieve personal focus compensation without altering the instrument’s coarse focus, which preserves calibration and speeds up multi-user shifts. Consistent results and low-maintenance use Engineered for repeatable visual assessment, the ocular supports standardised inspection routines where optical consistency matters. The robust optical assembly maintains focus stability under normal use, contributing to reliable visual measurement sessions. For specialised applications or if further technical data are required, additional compatibility checks or clarifications can be provided to ensure the eyepiece meets specific measurement or documentation needs. Contact Metav Werkzeuge to confirm compatibility or to request supply of the Euromex EWF 10x/22 mm eyepiece AX.6010; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AX.6010 SKU: AX.6010 Brand: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 22 mm Special features Diopter adjustment Compatible with Achios‑X‑Observer systems Wide-field (EWF) optical design FAQ What magnification and field of view does this eyepiece offer? The eyepiece provides 10× magnification with a 22 mm field of view, delivering a broad visible area for faster inspection. Is the eyepiece compatible with Achios‑X‑Observer microscopes? Yes, the EWF 10x/22 mm eyepiece AX.6010 is designed for use with the Achios‑X‑Observer range and fits the observation tube specified for that series. How does the diopter adjustment benefit users? The integrated diopter adjustment allows individual visual correction without changing the main focus, enabling quick handovers between operators while maintaining measurement consistency with the eyepiece. Is this ocular suitable for teaching and routine lab work? The wide-field design and straightforward handling make the eyepiece well suited to educational environments and routine laboratory inspections where quick, comfortable observation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm HWF 10x Eyepiece for bScope Ø30mm Tube, 10x Magnification - Euromex
Take advantage of the combination of clear 10× magnification, a 22 mm field of view and simple integration with bScope systems for faster inspection and reduced operator fatigue; order the eyepiece directly via Metav Werkzeuge or request expert advice from our consultants. HWF 10x/22 mm Eyepiece for bScope (Ø 30 mm tube) — Euromex The HWF 10x/22 mm Eyepiece for bScope is a wide-field microscope eyepiece designed for visual inspection and teaching applications, compatible with bScope units featuring a 30 mm tube. 10× magnification for clear detail 22 mm wide field of view Compatible with Ø 30 mm bScope tube Euromex quality — BS.6310 Faster inspections with a larger viewing area The HWF 10x/22 mm Eyepiece for bScope delivers 10× magnification together with a 22 mm field of view, a combination that increases the visible specimen area without sacrificing detail. For routine measurements and quick visual checks, the larger field reduces the need for constant stage adjustments, which speeds up throughput in production or laboratory workflows. The optical specification is stated to ensure predictable performance when replacing eyepieces or standardising inspection stations. Reliable fit and optical clarity for bScope systems Designed specifically for bScope microscopes, this eyepiece offers simple mechanical compatibility with a 30 mm tube, ensuring a secure seating and repeatable alignment. The designation BS.6310 identifies the Euromex item and helps maintain traceability across instrument inventories. Built to the common standard dimensions used in many educational and light-industrial microscopes, the component reduces downtime associated with mismatched optics and supports consistent imaging across multiple workstations. Practical advantages for workshops and training environments As a wide-field eyepiece, the accessory helps operators locate features more quickly and reduces eye strain during extended use, which is beneficial in both vocational training and quality-control tasks. The combination of a broad field and moderate magnification makes the eyepiece well suited to inspection, sample orientation and documentation tasks where rapid assessment is more important than extreme magnification. The optical characteristics therefore contribute directly to improved operational efficiency and a lower learning curve for new users. What the optical data means in practice When comparing eyepieces, magnification determines how much larger a specimen appears relative to the naked eye, while field of view specifies the maximum visible area through the ocular. In this eyepiece the 10× power enlarges fine details to a practical inspection scale, and the 22 mm viewing circle allows a broader context to be seen at once. These parameters together influence task selection, lighting needs and camera coupling options for photodocumentation; choosing matching eyepieces streamlines measurement routines and ensures consistent visual results. For reliable wide-field observation and to check availability of the Euromex HWF 10x/22 mm eyepiece BS.6310, contact Metav Werkzeuge for product advice and order processing at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer: Euromex Manufacturer item number: BS.6310 SKU: BS.6310 Product type: Microscope eyepiece Dimensions & optical data Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Compatibility & features Designed for bScope systems Wide-field eyepiece HWF 10x/22 mm designation FAQ What magnification and viewing area does this eyepiece provide? The eyepiece delivers 10× magnification with a 22 mm field of view, specified for the Euromex HWF 10x/22 mm Eyepiece BS.6310. Which microscopes is this eyepiece compatible with? This eyepiece is designed for bScope microscopes that use a Ø 30 mm tube; the designation confirms mechanical and optical matching for such systems. Is the eyepiece suitable for educational and workshop use? Yes, the wide field and moderate magnification make this eyepiece suitable for training, general inspection and routine quality tasks where fast orientation and reduced eye strain are priorities. How should the eyepiece be cleaned and maintained? Cleaning should be performed with a soft lens cloth and suitable lens cleaner; avoid abrasive materials and excessive force to preserve the optical coatings and ensure long service life. Can this eyepiece be used with camera adapters? The eyepiece is intended for visual observation; camera coupling depends on the microscope's camera port and adapters rather than the eyepiece itself, so camera compatibility is determined by the microscope interface. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Pair HWF 10x Eyepieces High Wide Field 10x/22mm - Euromex
Precision optics with 10x magnification and a 22 mm visible field enable efficient, comfortable inspection work; the pair configuration ensures stereo perception for three‑dimensional observation. Order the Euromex eyepieces via Metav Werkzeuge or request tailored advice from our consultants to confirm compatibility with the intended stereomicroscope. Pair HWF 10x/22 mm Eyepieces NZ.6010 — Euromex stereomicroscope eyepieces with 10x magnification and 22 mm field The Pair HWF 10x/22 mm Eyepieces NZ.6010 are intended for stereomicroscopes and provide a wide viewing area for inspection, assembly and quality control tasks 10x magnification for detailed observation 22 mm wide field of view for larger image area Designed for stereomicroscopes Euromex optical quality and reliable construction Precise visual detail for systematic inspection These eyepieces deliver 10x magnification combined with a 22 mm visual field, making them suitable for tasks that require both enlargement and a broad overview. The larger field of view allows faster scanning of components and reduces the need for frequent repositioning, which supports more efficient workflows in production and laboratory environments. The optical design preserves image sharpness across much of the viewing area, so small features remain discernible while maintaining context. Ergonomic viewing that reduces fatigue A wider viewing area contributes to comfortable viewing during extended sessions, limiting eye strain and enabling longer periods of concentrated inspection. Supplied as a matched pair for stereo rigs, the eyepieces support natural depth perception and accurate spatial assessment of parts. This ergonomic advantage is particularly relevant in repetitive quality checks and precision assembly, where operator comfort directly affects consistency and throughput. Practical application and compatibility in the workplace Optimised for use with stereomicroscopes, the eyepiece pair suits typical industrial applications such as electronics inspection, component assembly and routine quality control. The HWF designation indicates a wide-field configuration aimed at providing an expanded visual area without compromising magnification. For procurement decisions, these optics present a straightforward upgrade to existing stereo systems that require improved image area and dependable optical performance. Contact Metav Werkzeuge for personalised advice on Euromex eyepieces and reliable supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: NZ.6010 Manufacturer: Euromex Product type: microscope eyepiece Label: Paar HWF 10x/22 mm Okulare NZ.6010 Facts Magnification: 10x Field of view: 22 mm Special features HWF series Supplied as a pair For stereomicroscopes FAQ What magnification do these eyepieces provide? The Euromex pair offers 10x magnification (Pair HWF 10x/22 mm Eyepieces NZ.6010) for enhanced detail during inspection. Is this eyepiece pair suitable for stereomicroscopes? Yes, the eyepieces are designed specifically for stereomicroscopes and are supplied as a matched pair to preserve stereo vision. What does the 22 mm specification mean in practice? The 22 mm figure denotes the visible field diameter; a wider field facilitates faster scanning of components and a larger apparent image area. Are these eyepieces appropriate for prolonged inspection work? The wide-field configuration and pair matching help reduce eye strain during extended use, making them suitable for repetitive inspection tasks. Which applications are these eyepieces best suited to? Common uses include electronics inspection, precision assembly and quality control where both detail and a broad view are required. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Widefield Eyepiece 10x, 10x Magnification - Euromex
Incorrect data: the manufacturer "Euromex" is not included in the approved manufacturer list; as a result, it is not possible to generate the product description or provide any further details about the item in question, since the manufacturer does not meet the necessary criteria or standards outlined in the approved list, which is a critical requirement for ensuring compliance with established guidelines and maintaining the integrity of the product database; therefore, any attempt to proceed with generating a description for a product associated with this manufacturer would be invalid and could lead to potential discrepancies or inaccuracies in the system.
23 mm Pair HWF 10x Eyepieces 10x Magnification, 23mm Field - Euromex
High-precision optics and a generous field of view combine to speed up inspection tasks while reducing operator fatigue; order the eyepiece pair directly via Metav Werkzeuge or request consultancy for application-specific guidance. Pair HWF 10x/23 mm Eyepieces NZ.6210 – Wide-field 10× Optics for NexiusZoom EVO (Euromex) The Pair HWF 10x/23 mm Eyepieces NZ.6210 are wide-field oculars designed for NexiusZoom EVO stereomicroscopes, intended to enhance visual coverage and diagnostic clarity in inspection, assembly and quality-control environments Wide 23 mm field of view 10× high-field magnification Designed for NexiusZoom EVO compatibility Optimised for prolonged observation tasks Broader visual coverage for faster inspection The wide-field design of these eyepieces provides a 23 mm field of view, allowing operators to see more of the specimen at once. Combined with 10× magnification, this reduces the need for frequent stage adjustments and supports faster routine inspections and component checks. For production lines or laboratory benches where throughput and repeatability matter, the wider visual span translates into measurable time savings and fewer repositioning errors. Reliable optical pairing with NexiusZoom EVO systems These oculars are specified for the NexiusZoom EVO series and ensure optical alignment and consistent image rendition when fitted to compatible stereomicroscopes. The eyepiece pair preserves the instrument’s native imaging characteristics, maintaining reliable apparent magnification and focus behaviour across zoom ranges. For workshops and inspection labs, this means straightforward integration without recalibration of downstream measurement or documentation workflows. Practical advantages for everyday workshop use As a matched set of HWF eyepieces, this ocular pair supports comfortable observation during extended sessions. The wide-field format reduces eye movement and helps to keep details within the visual frame, which benefits repetitive tasks such as solder inspection, fine assembly or visual quality control. The eyepiece set is presented as a dedicated accessory for stereomicroscope applications, offering a direct, practical upgrade route for teams seeking improved optical ergonomics and process efficiency. For application advice or further technical details on the Euromex Pair HWF 10x/23 mm Eyepieces NZ.6210, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific inspection tasks Technical Data Article number: NZ.6210 SKU: NZ.6210 Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 23 mm Special features Pair HWF eyepieces for NexiusZoom EVO Suitable for stereomicroscopes Label: Pair HWF 10x/23 mm eyepieces for NexiusZoom EVO NZ.6210 FAQ What magnification and field of view do these eyepieces provide? The eyepiece pair delivers 10× magnification with a 23 mm field of view, optimised for wide-area observation. Are these eyepieces compatible with all stereomicroscopes? They are specified for the NexiusZoom EVO series; compatibility with other stereomicroscopes depends on ocular barrel dimensions and optical design—consult Metav Werkzeuge for verification. What does HWF mean and why does it matter? HWF indicates a wide-field eyepiece design, which increases the observable area and reduces the need for frequent specimen repositioning during inspection. Can the eyepieces be used for prolonged observation without discomfort? The wide-field format helps reduce eye movement and visual fatigue, making the set suitable for extended inspection or assembly shifts. Is the eyepiece pair suitable for quality-control documentation? Yes; the improved coverage and stable optical pairing with NexiusZoom EVO instruments support consistent visual assessment and photographic documentation. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25,4mm C-Mount Adapter For Stereo Microscope Trinocular Head With 0.5x CCD Adapter - Metav IndustryLine
Benefit from precise imaging, the C‑mount standard and a 0.5× optical reduction that widens the captured field while maintaining alignment and stability; order the Adapter M503.252.1 directly via Metav Werkzeuge or ask our consultants if needed. Adapter M503.252.1 — CCD adapter for stereo microscopes, C‑mount 25.4 mm, 0.5× A Adapter M503.252.1 engineered to link a stereo microscope trinocular port to a digital camera, enabling consistent image capture and expanded field coverage for laboratory and inspection workflows. CCD adapter for digital camera integration C‑mount connection, 25.4 mm diameter 0.5× reduction for wider field of view Robust construction, precise optical alignment Faster documentation with standard camera interfaces The CCD adapter provides a straightforward mechanical and optical interface between a trinocular microscope port and a C‑mount camera, converting the microscope’s exit pupil to a camera‑friendly image circle. The integrated 0.5× reduction lowers overall magnification to increase the field of view, which speeds up specimen surveys and reduces the need for repeated repositioning. For routine imaging tasks in quality control or teaching, this configuration shortens inspection cycles and improves throughput while preserving sufficient image detail for analysis. Stable optical alignment for repeatable results Mechanical stability is critical when photographing at high magnification; the adapter is designed to maintain precise optical alignment across repeated attachments. The construction minimises mechanical play and preserves the optical axis between the microscope and the digital camera, reducing vignetting and ensuring consistent exposure framing. Such repeatability supports traceable documentation and eases comparison between successive captures, a practical advantage for assembly‑line inspection or documented research where uniform image geometry is required. Practical use in laboratory and inspection environments Integration of a dedicated camera adapter simplifies the transition from visual observation to digital imaging. The reduction optics help capture larger areas of a specimen without changing objectives, which benefits users who alternate between overview shots and detail inspection. Compatibility with common C‑mount cameras makes the adapter a flexible choice for educational labs, industrial inspection benches and R&D setups that require reliable image capture without complex custom coupling. For precise imaging solutions and to discuss compatibility with existing microscopy equipment, contact Metav Werkzeuge to arrange supply or technical consultation for the Adapter M503.252.1 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M503.252.1 GTIN: 4054469145327 ECLASS: 32130102 Tariff number: 90119090 Facts Weight: 6.15 kg Magnification: 0.5× Connection: C‑mount (25.4 mm) Type: C0.5-S-c Special features CCD adapter For attachment between stereo microscope and digital camera Compact optical reduction module Designed for stable optical alignment FAQ What cameras are compatible with this adapter? The Adapter M503.252.1 is designed for cameras with a standard C‑mount thread (25.4 mm) and will accept most industrial and scientific C‑mount CCD or CMOS cameras. Does the adapter change the microscope magnification? Yes, the built‑in 0.5× reduction decreases the effective magnification at the camera port, increasing the captured field of view for broader specimen coverage. Is this adapter suitable for routine laboratory documentation? The CCD adapter from Metav IndustryLine is intended for reliable imaging and is well suited to routine documentation tasks in laboratories and inspection environments. How does the adapter affect image alignment and vignetting? The adapter is engineered to maintain optical alignment and reduce vignetting when correctly matched to the microscope exit pupil and a C‑mount camera. What is the article number for ordering and reference? Reference Article number M503.252.1 (SKU M503.252.1) when enquiring or ordering to ensure the correct CCD adapter is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Super Widefield Eyepiece 10x, Ø30mm Tube - Euromex
Misinformation: The product data lists the manufacturer as "Euromex", but this brand is not included in the provided manufacturer overview required for the final entry. Please supply the correct manufacturer mapping from the given list or provide the full manufacturer and responsible party details so that the product description can be completed accurately and in accordance with the necessary standards. It is essential to ensure that all information is consistent with the approved manufacturer list to avoid discrepancies or errors in the final documentation, which could lead to confusion or misrepresentation of the product in question.
30mm Tube EWF 10x/20mm Eyepiece, 20mm Field - Euromex
Take advantage of the 10× magnification and 20 mm wide field to speed up inspections while retaining high optical clarity; the compact Ø 30 mm tube ensures simple integration into standard microscope bodies. Order the eyepiece directly via Metav Werkzeuge or ask our consultants for guidance on compatibility and delivery. EWF 10x/20 mm Eyepiece IS.6210 — 10× magnification, 20 mm field for Ø 30 mm tube EWF 10x/20 mm Eyepiece IS.6210 is a wide-field ocular designed for routine laboratory and educational microscopy where an extended field and reliable magnification improve inspection speed and comfort 10× magnification for clear observation 20 mm wide field of view for more context Fits Ø 30 mm eyepiece tube for easy installation Faster, clearer inspections with wide-field optics The 10× magnification provides a usable increase in detail without sacrificing situational awareness, while the 20 mm field of view means more of the specimen is visible at once. This combination reduces the need for constant stage adjustments and speeds up repetitive measurements. The eyepiece is engineered as a wide-field eyepiece, so observers benefit from reduced peripheral distortion and improved optical clarity, which is particularly helpful during prolonged sessions and visual sorting tasks. Straightforward compatibility and installation Designed for microscopes accepting a Ø 30 mm tube, the eyepiece offers uncomplicated integration into existing stands and heads; the standard tube diameter allows quick swapping with compatible oculars. The compact design supports diverse setups, from student benches to quality-control workstations, and is suited to systems where changes between magnifications must be fast and fail-safe. The SKU IS.6210 is referenced for ordering and verification in inventory lists. Reduced operator fatigue and consistent results By combining a wide field with moderate magnification, the ocular lowers eye strain and helps maintain performance across long inspection periods. The larger apparent field of view allows technicians and students to track features more naturally, aiding both manual measurement and visual assessments. Where repeatability matters, using a stable, well-defined eyepiece contributes to consistent observational results and fewer measurement deviations over time. Practical handling and routine care The eyepiece is intended for practical everyday use: optical surfaces should be kept clean with appropriate lens tissue and solvent to preserve high-quality optics and extend service life. As a modular component, it can be stored safely when not in use and replaced without recalibrating the complete optical chain, which minimises downtime in production or teaching environments. For bespoke setups or replacement advice, technical consultants can confirm suitability for specific microscope models. For reliable wide-field observations, opt for the Euromex EWF 10x/20 mm eyepiece IS.6210 and contact Metav Werkzeuge for tailored compatibility checks and prompt delivery from Emmerich Technical data Article number: IS.6210 Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 20 mm Tube diameter: Ø 30 mm Special features EWF wide-field eyepiece design Label: EWF 10x/20 mm Okular, Ø 30 mm Tubus IS.6210 Image file: IS.6210.jpg FAQ What magnification does this eyepiece provide? The eyepiece provides 10× magnification, which is designed to balance detail and field of view for routine inspections. Which eyepiece tube size is required? This ocular fits microscopes with a Ø 30 mm tube, as stated for the EWF 10x/20 mm eyepiece IS.6210. How large is the usable field of view? The eyepiece offers a 20 mm field of view, giving an extended visible area that reduces the need for stage movement. Is the IS.6210 suitable for teaching and laboratory use? Yes—the combination of wide field and moderate magnification makes the IS.6210 suitable for both educational benches and routine lab inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Tubus Eyecup Pair, Suitable for Ø30mm Tubes - Euromex
Take advantage of a precise fit and reliable eye contact comfort thanks to soft eyecups sized for a 30 mm tube; the paired set ensures symmetrical use on binocular instruments and fast replacement when required. Order the pair directly via Metav Werkzeuge or contact the consultants for advice. A pair of eyecups, Ø 30 mm tube IS.6299 — Euromex microscope accessory, 30 mm tube fit A pair of eyecups, Ø 30 mm tube IS.6299 provides comfortable eye sealing for binocular oculars, suited to standard 30 mm tubes in laboratory and workshop microscopes Compatible with 30 mm tube eyepieces Soft, comfortable eye seal Paired set for binocular instruments Improve observational comfort and consistency with a precise fit These eyecups are designed for straightforward replacement on oculars with a 30 mm tube diameter, delivering a reliable physical barrier that reduces stray light and stabilises the viewing position. The paired supply supports binocular setups, allowing both eyes to benefit from the same contact geometry and preventing asymmetric posture during inspection. Compatibility with a standard tube size means integration into many stereo and educational microscopes is uncomplicated; where the tube conforms to the 30 mm nominal diameter, installation is typically a push-fit or slight rotation to lock, providing an immediate functional upgrade to existing oculars. Maintain focus and reduce fatigue during extended use A well-fitting eyecup contributes directly to ergonomic performance by ensuring a consistent eye-to-eyepiece distance and a soft perimeter that cushions prolonged contact. This minimises minor head movement and helps maintain alignment between the observer and the optical axis, which in turn supports faster, more reliable inspections and reduces visual fatigue in routine measurement or assembly work. The soft seal of the eyecups also reduces interruptions from ambient light, improving contrast and perceived image stability when working with low-contrast samples or under bright workshop lighting. Simple upkeep and reliable replacement for laboratory use The paired eyecup set is a practical service item for workshops and teaching laboratories where ocular wear or hygiene concerns require regular replacement. The design permits quick removal for cleaning or exchange without affecting ocular calibration, which keeps downtime to a minimum. As a compact microscope accessory from Euromex, the item provides a cost-effective way to extend the comfort and functionality of existing microscopes while preserving optical performance; routine maintenance consists of gentle cleaning with a lint-free cloth and mild detergent if required, avoiding abrasive agents that could impair the contact surface. For a dependable eyecup replacement compatible with 30 mm tubes and fast supply from Emmerich, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: IS.6299 SKU: IS.6299 Brand: Euromex Product type: Microscope accessory Facts Tube diameter: 30 mm Special features Paired eyecups Suitable for binocular microscopes Reduces stray light and improves eye contact FAQ Are these eyecups compatible with standard 30 mm ocular tubes? Yes. The eyecups are specified for a 30 mm tube diameter and are intended to fit oculars that conform to that nominal size. How are the eyecups mounted and removed? Mounting is typically by push-fit or slight rotation onto the ocular tube; the Euromex eyecups IS.6299 are designed for quick replacement without tools. Do the eyecups come as a pair and suit binocular instruments? Yes. IS.6299 is supplied as a paired set, ensuring symmetrical fit for binocular microscopes. What maintenance is recommended for these eyecups? Cleaning with a soft, lint-free cloth and mild detergent is advised; avoid solvents or abrasive cleaners that could degrade the sealing surface of the eyecups. Will the eyecups affect optical calibration of the microscope? No. Properly fitted eyecups maintain the eye-to-eyepiece distance and should not alter the optical calibration of the instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30x Eyepiece Ø30 9mm Field For Stereo Microscopes - Metav IndustryLine
Take advantage of high magnification and a compact Ø30 mm barrel for precise component inspection; the combination of 30x optical power and a 9 mm field of view delivers detailed imagery with practical handling. Order directly via Metav Werkzeuge or consult the Metav team for compatibility advice. SWH30X eyepiece – 30x magnification, Ø30 barrel (Metav IndustryLine) The SWH30X eyepiece boosts stereo-microscope magnification to 30x, providing a compact ocular for detailed visual inspection across workshops and laboratories 30x magnification for fine detail Ø30 mm barrel for standard ports 9 mm field of view for focused clarity Lightweight 0.5 kg for easy handling Precision magnification for detailed inspection This eyepiece delivers 30x magnification, tailored for tasks that require close visual analysis. High magnification increases the apparent size of small features, enabling clearer assessment of micro‑solder joints, surface defects and fine contours. The optical specification translates directly into faster fault detection and more reliable quality checks, because details that are invisible at lower powers become distinguishable. The design supports repeatable observation, so measured visual findings can be documented with confidence. Compact barrel and controlled field of view for practical use The Ø30 mm barrel fits standard stereo‑microscope ports, making integration straightforward in most optical rigs. The 9 mm field of view is sized to balance detail and context: large enough to orient on the component, yet narrow enough to concentrate on the area of interest without excessive repositioning. At a weight of 0.5 kg, the ocular remains manageable during bench work or when used in modular inspection stations, reducing operator fatigue and easing installation into existing inspection chains. Optical clarity and handling that support workflow efficiency Engineered for sharp imaging, the eyepiece emphasises contrast and resolution within its specified field. The compact ocular form reduces stray light and helps preserve depth perception in stereo setups, which is beneficial when handling small assemblies or performing precision alignment. Robust mechanical tolerances ensure that the optical axis remains stable during routine use, so inspections stay consistent over time rather than drifting with frequent adjustments. Measurable benefits for quality assurance The combination of defined optical values and a standard barrel diameter yields quantifiable improvements in inspection throughput: higher magnification leads to fewer iterative checks, and the standard mount reduces setup time across multiple workstations. For procurement and process planning, the clear technical parameters mean predictable integration into measurement routines and documentation systems, supporting traceable quality control in production and laboratory environments. Contact Metav Werkzeuge for compatibility checks or to request application advice regarding the SWH30X eyepiece and integration into existing inspection setups Technical data Article number: M503.241.4 GTIN: 4054469145150 Manufacturer: Metav IndustryLine Category: Optik Facts Magnification: 30x Field of view: 9 mm Barrel diameter: Ø30 mm Weight: 0.5 kg Tariff number: 90119090 Special features Typ: SWH30X Designation: Okular Suitable for stereo microscopes Thumbnail available: m5032411-main.jpg FAQ What magnification does this eyepiece provide? The SWH30X eyepiece from Metav IndustryLine provides 30x magnification, suitable for detailed visual inspections. Which microscope ports are compatible with the ocular? The eyepiece uses a Ø30 mm barrel, which fits standard stereo‑microscope ports and facilitates quick integration. What field of view can be expected during inspection? An approximate 9 mm field of view is provided, giving a balance between detail and situational awareness for component inspection. Is the eyepiece suitable for laboratory and workshop use? Yes; the SWH30X ocular is designed for practical use in both workshop and laboratory environments where higher magnification and reliable handling are required (SKU: M503.241.4). How does the eyepiece support quality control processes? Defined optical specifications (magnification, field of view, barrel size) enable consistent inspection routines and predictable integration into existing quality workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5x Wide Field Microscope Eyepiece 18mm Field Number, WF 5x/18mm - Euromex
Take advantage of the combination of a wide-field optical design, clear 5× magnification and a practical field number for fast specimen orientation in teaching and routine inspection. Order the eyepiece directly via Metav Werkzeuge or contact our consultants for application advice. Euromex AE.5571 Wide-field Eyepiece — 5×, FN 18 mm The AE.5571 is a wide-field microscope eyepiece providing 5× magnification and an 18 mm field number for efficient overview imaging in educational and laboratory applications Wide-field eyepiece, field number 18 mm 5× magnification for low-power overview Suitable for educational and lab microscopes Faster specimen orientation with a wide visual field The combination of 5× magnification and a field number of 18 mm delivers a notably larger apparent field than standard eyepieces, enabling quicker scanning of slides and faster localisation of areas of interest. For technicians and instructors who regularly need to move between samples, the broader view reduces the need for repeated stage adjustment and shortens inspection cycles. The optical design emphasises an unobstructed visual experience, making it simpler to survey a specimen before switching to higher-power objectives. Built to support teaching and routine inspection work A wide-field eyepiece such as this is particularly suited to classroom benches and busy lab benches where speed and clarity matter. The generous field aids group demonstrations and rapid demonstrations under the microscope, while also helping novice users to keep track of the specimen during live manipulation. The configuration is compatible with common educational and analytical microscopes, offering a practical balance between overview and detail without complicating the optical train. Clearer viewing explained in plain terms The field number (FN 18 mm) is a standard optical specification that describes the diameter of the image circle seen through the eyepiece; a larger FN gives a wider observable area at the eye. In practical terms, with this eyepiece the visible scene appears broader at the same objective magnification compared with smaller-FN eyepieces. This means less panning across the stage and a more comfortable viewing session, particularly during extended observation. The 5× power provides a low-magnification perspective that is ideal for initial orientation before moving to higher magnifications. Reliable sourcing and practical purchasing for workshops Sourcing optical components from a dependable distributor reduces risk and keeps workflows steady. Metav’s approach to distribution emphasises accessibility to precision tools for workshops and educational settings, backed by a broad product range and established logistics from Emmerich. For facilities looking to standardise bench setups or replace worn eyepieces, this eyepiece presents a straightforward specification that integrates into standard optical setups and supports consistent results across user teams. For practical advice on integration or to secure supply through Metav Werkzeuge, contact our sales team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants can advise on compatibility and delivery schedules Technical data Article number: AE.5571 SKU: AE.5571 Brand: Euromex Product type: Microscope eyepiece Source: Education PDF-S. 7,9,13 Facts Magnification: 5× Field number: 18 mm Special features Wide-field eyepiece Designed for educational and laboratory microscopes FAQ What magnification does this eyepiece provide? The eyepiece delivers 5× magnification, offering a low-power overview suitable for initial specimen orientation. What does the field number 18 mm mean for everyday use? A field number of 18 mm indicates a wider apparent field of view, which helps to scan slides more quickly and reduces the amount of stage movement required. Is this eyepiece suitable for teaching microscopes? Yes, the wide-field design and modest magnification make it well suited to educational settings and routine laboratory inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5x Wide Field Microscope Eyepiece 22 mm Field Number, WF 5x/22 mm - Euromex
Benefit from precise 5x magnification combined with a wide-field 22 mm view to speed up routine inspections and reduce eye movement; the matched optical set ensures reliable, repeatable observation. Order the microscope eyepiece directly via Metav Werkzeuge or consult our specialists for suitability and supply. Microscope eyepiece EduBlue ED.6005 — 5x wide-field eyepiece by Euromex Microscope eyepiece EduBlue ED.6005 offers a wide visual field and comfortable overview for stereomicroscope inspection and educational use Wide-field 22 mm eyepiece 5x magnification for broad overview Designed for stereomicroscopes EduBlue optical quality Wider view for faster, more efficient inspections The 5x magnification of this eyepiece provides a lower-power overview that helps operators locate features quickly before switching to higher-power objectives. With a 22 mm field number, the eyepiece supplies a wide field of view that reduces the need for stage movement and repeated refocusing. For routine inspection tasks, that translates into measurable time savings and a smoother visual workflow, particularly where larger sample areas must be scanned systematically. Matched optics for stereomicroscope pairs and educational settings Supplied as a pair, the eyepieces are intended for binocular stereomicroscopes and deliver balanced images across both optical channels. The matched optics reduce image disparity and help maintain stereoscopic depth perception during prolonged use. In classrooms and training labs, the combination of low magnification and broad field supports rapid demonstrations and comfortable group observations without compromising image coherence. Comfortable observation that supports quality control A wider apparent field typically reduces eye fatigue because less panning and readjustment are required during inspections; this eyepiece emphasises optical clarity and operator comfort to maintain focus during extended sessions. The design is suited to visual quality checks, component sorting and preparatory work prior to detailed measurement, enabling technicians to maintain consistent inspection routines with less visual strain. Clear selection, compatibility and trusted supply chain As part of the EduBlue series, this eyepiece aligns with a practical selection strategy: choose a low-power, wide-field ocular to complement higher-power objectives for a complete inspection workflow. Compatibility with standard stereomicroscope binocular heads makes integration straightforward; for any specific compatibility queries or additional technical data, Metav’s specialists can confirm fit and delivery options. Contact details are available for questions about suitability and further specifications. For dependable optical accessories and professional advice on the EduBlue ED.6005, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply and compatibility guidance. Technical Data Article number / SKU: ED.6005 Manufacturer: Euromex Model series: EduBlue Product type: Microscope eyepiece Source: Education PDF S. 29,38 Core specifications Magnification: 5x Field number: 22 mm Intended use: For stereomicroscopes Features and compatibility Wide-field eyepiece, WF 22 mm Supplied as a pair for binocular heads EduBlue optical series FAQ Are these eyepieces compatible with standard stereomicroscope binocular heads? Yes. The EduBlue ED.6005 eyepieces are designed for use with stereomicroscopes and are supplied as a matched pair for binocular heads. What does the 22 mm field number mean in practice? A field number of 22 mm indicates a comparatively wide apparent field with the 5x eyepiece, so the visible area through the ocular is larger than with lower field-number eyepieces. Are the eyepieces sold as individual units or as a pair? The EduBlue ED.6005 is supplied as a pair suitable for binocular stereomicroscopes to ensure matched optical performance. Will a 5x eyepiece affect total system magnification? The eyepiece magnification contributes to the overall system magnification together with the microscope’s objective; the final image scale depends on the objective and microscope configuration. Is this eyepiece suitable for educational laboratories? Yes. The combination of 5x magnification and a wide-field 22 mm view makes the eyepiece well suited to teaching, demonstrations and introductory inspection tasks. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com