Take the routine risk out of optics maintenance by combining a specialist lens cleaning fluid with a lint‑free cloth, an air blower, a brush and swabs; this reduces particle damage and helps preserve optical performance. Order the kit directly via Metav Werkzeuge or consult our specialists for integration into workshop maintenance schedules. Lens Cleaning Kit PB.5275 — Microscope cleaning set with fluid and air blower (Euromex) A Lens Cleaning Kit PB.5275 for safe, residue‑free cleaning of microscope optics and other precision lenses in laboratories, education and workshop environments. Lens cleaning fluid included Lint‑free lens cloth for streak‑free results Air blower, brush and swabs for dust removal Preserve optical performance with specialist cleaning components This cleaning set provides a focused maintenance solution for precision optics. The combination of lens cleaning fluid and a lint‑free lens cloth is designed to remove oil, fingerprints and fine dust without leaving residues that scatter light; this helps maintain contrast and resolution in microscopes and other optical devices. By using materials intended for delicate surfaces, the risk of abrasion is reduced and the lifetime of objective lenses and oculars is extended. The pack supports predictable maintenance cycles and contributes to consistent measurement and inspection results in professional environments. Remove contaminants safely and reduce rework The included air blower, brush and swabs enable controlled removal of loose particles before any liquid contact, lowering the chance of scratches during wiping. Blowing or brushing debris away first avoids dragging abrasive grit across lens coatings; following up with the lint‑free cloth and the cleaning fluid cleans residues and smears efficiently. For routine servicing, this sequence—air, brush, then fluid and cloth—minimises the need for repeated cleaning and reduces downtime for precision equipment, improving throughput in busy workshops and teaching labs. Practical benefits for everyday workshop and lab use Designed for technicians and laboratory staff, the kit supports quick, repeatable maintenance procedures that safeguard instrument reliability. Using the correct cleaning consumables helps to avoid aberrations and failed inspections caused by contaminated optics; in turn, this reduces the frequency of costly recalibrations or lens replacement. The balanced set of tools in the pack provides everything required for a standard cleaning cycle, enabling consistent outcomes across multiple instruments and users and contributing to operational efficiency. Simple to adopt within existing maintenance routines The kit is ready to deploy as part of scheduled service rounds or ad hoc cleaning interventions. As an all‑in‑one microscope cleaning pack, it eliminates the need to assemble disparate consumables and supports uniform staff training on safe optics care. Clear labelling of components helps ensure the correct sequence of use, while the compact nature of the set makes it convenient to keep alongside inspection benches or portable service kits. For facilities that value repeatability and traceable maintenance practices, this cleaning set is a straightforward addition to preventative care protocols. For reliable optics maintenance, contact Metav Werkzeuge to discuss the Euromex Lens Cleaning Kit PB.5275 and how it can be implemented in workshop or laboratory routines; our team in Emmerich can advise on best practice and supply from stock—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: PB.5275 SKU: PB.5275 Manufacturer: Euromex Product type: Microscope cleaning agents Image file: PB.5275.jpg Facts Gallery file size: 135580 bytes Image URL available Special features Includes lens cleaning fluid Includes lint‑free lens cloth Includes brush Includes air blower Includes cotton swabs Intended for cleaning microscope optics and precision lenses FAQ How should the kit be used to avoid damaging optics? Start by using the air blower and brush to remove loose particles, then apply the lens cleaning fluid sparingly and wipe gently with the lint‑free lens cloth; the Euromex kit PB.5275 is configured to support this sequence for safe cleaning of delicate surfaces. Is the cleaning set suitable for all types of microscopes and lenses? The PB.5275 cleaning set is intended for microscope optics and similar precision lenses; it is suitable for routine maintenance of objective lenses and eyepieces, though any specific manufacturer recommendations for particular instruments should be followed. Will the cleaning fluid leave a residue or affect lens coatings? When used as recommended, the lens cleaning fluid in this kit is intended to clean without leaving visible residue; adherence to the air‑first, liquid‑second procedure helps protect delicate coatings and maintain optical performance. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a frosted optical surface and the MicroBlue series' proven accessory compatibility to achieve more uniform illumination in routine and educational microscopy; order the filter directly via Metav Werkzeuge or consult Metav’s specialists for specification matching. MicroBlue MB.9710 Microscope filter — Frosted diffusion by Euromex The MicroBlue MB.9710 is a frosted microscope filter designed to provide even light diffusion for sample observation and illumination control in educational and laboratory microscopy. Frosted surface for uniform light diffusion Compatible with educational microscopes Compact, easy to fit in filter holders Part of the MicroBlue series by Euromex Achieve more consistent image illumination for clearer observation A frosted filter scatters transmitted light to reduce localised bright spots and shadows, resulting in more uniform illumination across the field of view. For teaching labs and routine inspections this means specimens are presented with fewer artefacts caused by direct light sources, improving the visual contrast of delicate structures. The scattering effect is a simple optical principle: the diffusing finish disperses rays so that the illumination profile becomes smoother, aiding visual assessment and basic image documentation without changing microscope optics. Easy integration into existing microscope accessory setups The accessory is built for straightforward inclusion into standard filter holders and illumination paths, enabling fast retrofitting in classroom and workshop environments. Thanks to its compact design and series compatibility, the filter requires no complex alignment and minimises instrument downtime. The practical result is a quick upgrade route to better lighting conditions, reducing set-up time and increasing productive observation periods in busy labs. Practical use cases: education, routine checks and sample photography The filter supports common microscopy tasks where even lighting is beneficial, such as specimen demonstrations, quality checks and simple photomicrography under transmitted light. By softening direct illumination, the accessory helps highlight surface texture and subtle contrasts that are otherwise masked by specular highlights. For applications demanding repeatable everyday results, the MicroBlue MB.9710 offers a low-effort way to standardise visual outcomes across multiple instruments and operators. For uniform, diffused illumination in educational and laboratory microscopy, request Euromex MicroBlue MB.9710 via Metav Werkzeuge or contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich. Technical data Article number: MB.9710 SKU: MB.9710 Manufacturer: Euromex Model series: MicroBlue Product type: Microscope filter Facts No measurable technical data provided in the dataset Special features Frosted coating Category: Filter (microscopy accessory) Source: Education PDF S.7 FAQ What optical effect does the filter provide? The MicroBlue MB.9710 produces a frosted diffusion that evens out illumination and reduces hot spots when used as a microscope filter. Which microscope setups can accept this filter? The Euromex MicroBlue MB.9710 fits standard filter holders and is intended for educational and routine laboratory microscopes; compatibility should be checked against the instrument’s accessory specifications. Does the filter change image colour or contrast? The primary function of the MicroBlue MB.9710 is light diffusion; any colour balance change is minimal and arises from scattering rather than spectral filtering, preserving overall contrast for basic observation. Is this filter suitable for photomicrography? For simple documentation with even lighting conditions, the MicroBlue MB.9710 can improve image uniformity and reduce glare, supporting clearer photographic results in routine tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact external adapter that delivers a regulated 5 Vdc output from a universal 100–240 Vac input for stable microscope illumination and accessories; order via Metav Werkzeuge or contact their consultants for tailored advice. MicroBlue MB.9975 Microscope Power Supply — External mains adapter 100–240 Vac → 5 Vdc by Euromex The MicroBlue MB.9975 is a compact external mains adapter supplying a stable 5 Vdc output for microscope illumination and ancillary devices, ideal for laboratory, classroom and workshop use Universal 100–240 Vac input Regulated 5 Vdc output Compatible with MicroBlue series Stable low‑voltage supply for sensitive microscope systems The adapter provides a regulated output of 5 Vdc, derived from a wide‑range mains input of 100–240 Vac (50/60 Hz); this combination ensures a stable supply for low‑voltage illumination modules and electronics commonly found in microscopy setups. A regulated supply keeps voltage fluctuations to a minimum, which reduces the risk of flicker or inconsistent light intensity and helps maintain measurement and imaging reliability. By isolating the mains supply in an external unit, the instrument benefits from reduced heat generation and simplified maintenance compared with internal power modules. Practical compatibility and straightforward integration Designed as an external mains adapter, the unit integrates simply with the MicroBlue series and other devices requiring a 5 Vdc feed. The external format keeps the mains connection away from delicate optical assemblies, while the standard voltage output supports a wide range of LED illumination modules and control electronics that accept 5 Vdc. For installations where device current draw must be confirmed, the regulated characteristic provides predictable behaviour; however, matching the adapter’s current rating to the accessory remains a necessary step when specifying complete systems. Safety, documentation and procurement support Documentation references indicate the adapter format as an external mains adapter‑charger (source: Education PDF p.7), which aids technical verification during procurement. For specifications not listed in the available data set—such as exact current rating or included cabling—technical clarification is recommended before final selection. Metav Werkzeuge stands for the democratisation of precision: extensive product range, reliable stock handling from Emmerich and a long history of service to industry and trade provide an assured procurement channel for microscopy equipment and accessories. Secure the Euromex MicroBlue MB.9975 through Metav Werkzeuge for a dependable low‑voltage supply—contact Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and ordering details Technical data Article number: MB.9975 SKU: MB.9975 Brand: Euromex Product type: Microscope power supply Model series: MicroBlue Core specifications Input: 100–240 Vac (50/60 Hz) Output: 5 Vdc Features & compatibility External mains adapter‑charger Compatible with MicroBlue series Category: Microscopy accessories > Miscellaneous > Power supply & cables Source: Education PDF p.7 FAQ Is the adapter suitable for MicroBlue microscopes? The Euromex MicroBlue MB.9975 is specified as part of the MicroBlue series and is designed as the external adapter for devices within that range. What are the input and output voltages of the unit? The adapter accepts 100–240 Vac (50/60 Hz) at the mains side and provides a regulated 5 Vdc output on the low‑voltage side. Can the adapter power 5 Vdc LED illumination modules? The adapter supplies a regulated 5 Vdc, which is the correct nominal voltage for many LED modules; confirmation of the adapter’s current capacity versus the module’s draw is advised before use. Is the mains input universal for different countries? Yes, the 100–240 Vac (50/60 Hz) specification denotes a universal mains input suitable for international voltages and frequencies. Is a power cable included with the adapter? The available product data does not state whether a cable is supplied; cable inclusion should be confirmed prior to purchase. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise sample positioning together with heating-stage compatibility for controlled experiments; these features support reproducible imaging and flexible use in modern microscopy workflows. Order the Euromex stage directly via Metav Werkzeuge or consult our specialists for compatibility advice. Microscope stage AE.5168-I by Euromex — heating-stage compatible for modern microscopes The Microscope stage AE.5168-I is a dedicated stage designed for use with contemporary Euromex microscopes, engineered to integrate with the heating stage series when used in conjunction with the appropriate controller. Compatible with Euromex heating stage series Requires external controller for heating function Designed for use with modern microscopes Reliable sample positioning for repeatable results A stable and well-engineered stage is essential for reproducible imaging and accurate measurements. The AE.5168-I provides a purposeful platform for sample placement, reducing drift and minimising the need for frequent realignment. This leads to more consistent outcomes in serial imaging or comparative material inspections. By focusing on mechanical stability and precise movement, the stage supports workflows where repeatability and image fidelity are critical for documentation and analysis. Integrated temperature capability extends experimental scope Designed to be used with the heating stage series, the stage enables controlled-temperature observations when connected to the required controller. Temperature control is valuable for experiments where thermal conditions influence sample behaviour, such as phase-change studies, polymer testing or biological preparations that require a stable environment. Note that the heating function depends on pairing with the controller and is specified for use with newer microscope models; this ensures reliable temperature control without compromising instrument safety. Clear compatibility and practical guidance for workshop integration Compatibility is straightforward but specific: the heating-stage features are intended for integration only with new microscopes, so verification against the instrument series is recommended before purchase. The AE.5168-I complements laboratory and workshop setups that prioritise controlled conditions and reliable sample handling. For purchasers seeking to consolidate suppliers, Metav Werkzeuge offers a dependable supply route and technical consultation to confirm that the stage fits the intended microscope series and application. Contact Metav Werkzeuge to confirm microscope compatibility and to source the Euromex Microscope stage AE.5168-I; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AE.5168-I Manufacturer: Euromex SKU: AE.5168-I Product type: Microscope stage Data No numerical specifications provided Special features Compatibility with heating stage series (requires controller) Intended for use with new microscope models Category: accessories for microscopes FAQ What is the AE.5168-I designed for? The AE.5168-I is a microscope stage intended to provide a stable platform for samples and to enable integration with the Euromex heating stage series when paired with the appropriate controller. Is a controller included with the stage? No, the controller is not included; the heating capability of the AE.5168-I requires an external controller from the heating stage series. Can the stage be used with older microscopes? The heating-stage integration is specified for use only with newer microscope models; the mechanical stage may fit other instruments but heating functionality will be limited to compatible microscopes. What applications benefit from this stage? Applications that require stable sample placement and optional temperature control—such as material testing, controlled-condition observations and temperature-sensitive sample handling—benefit from the AE.5168-I. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Order a precision optical solution that supports reliable fluorescence imaging; the combination of fluorescence-optimised filtering and proven Euromex production quality ensures consistent contrast in fluorescence workflows. Order the microscope filter directly via Metav Werkzeuge or ask our consultants if needed. Microscope filter AE.3249 — Euromex fluorescence optical filter, Oxion-compatible Microscope filter AE.3249 provides targeted spectral separation for fluorescence applications and is designed for use with compatible upright fluorescence turrets. Optimised for fluorescence imaging Compatible with Oxion 4-position turret Precision optical transmission Euromex manufacturing quality Reliable contrast for fluorescence microscopy An optical element for controlled spectral transmission, the optical filter described here helps isolate emission bands and suppress excitation light, improving signal-to-background ratio for fluorescence workflows. By delivering consistent spectral characteristics, this accessory supports repeatable image capture and reliable comparison between samples. The design prioritises precision in the transmitted wavelength range without introducing unnecessary complexity, making it suitable for routine laboratory or teaching environments where dependable contrast matters. Simple integration into existing fluorescence setups The accessory is intended as a microscopy component compatible with common upright turrets; documented compatibility includes the Oxion upright with a 4-position fluorescence attachment. Integration requires minimal adjustment because the element performs a single, well-defined optical function: selective transmission. This reduces setup time and helps maintain imaging throughput in multi-user labs. For users less familiar with filter terminology, the function can be summarised as “allowing only the desired fluorescence emission to pass while blocking the excitation light”, which directly improves image clarity. Workshop-ready quality and measurement confidence Manufactured by Euromex, the component aligns with expectations for durable microscopy accessories. The optical construction is focused on stable performance across routine use rather than speculative features; this supports maintenance of consistent results over time. When paired with calibrated imaging equipment and correct illumination, the element contributes to reproducible outcomes and lowers the risk of misinterpretation caused by stray light. For procurement, choosing a verified accessory reduces the likelihood of compatibility issues and streamlines instrument validation procedures. For detailed application matching or to confirm turret compatibility, contact Metav Werkzeuge to discuss the Euromex AE.3249 and its integration into existing fluorescence rigs — consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: AE.3249 Manufacturer: Euromex Product type: Microscope filter Category: Fluorescence Facts No numerical specifications provided in the data Special features Compatibility: Oxion upright, 4-position fluorescence attachment Category: Fluorescence microscopy accessory Description: Microscope filter AE.3249 FAQ What is the intended use of this filter? The Euromex Microscope filter AE.3249 is used to separate fluorescence emission from excitation light, improving contrast in fluorescence microscopy applications. Will this filter fit an Oxion upright microscope? Yes, the documentation indicates compatibility with an Oxion upright equipped with a 4-position fluorescence attachment; the AE.3249 is designed to be used in such turrets. Does the filter come with wavelength specifications? No wavelength data were provided in the available specification; users should consult Metav Werkzeuge for spectral details if specific bandpass information is required for an experiment. Can the filter be used for routine teaching labs? The Euromex AE.3249 is suitable for routine fluorescence work where consistent contrast and straightforward integration are priorities. Is this accessory a complete fluorescence module? No, AE.3249 is an optical filter accessory intended for use within a fluorescence attachment or turret and not a standalone illumination or detection system. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of uniform illumination and simple integration to improve microscopy throughput; the compact Köhler-equipped lamp delivers consistent field lighting and fast setup. Order this illumination via Metav Werkzeuge or consult our specialists for compatibility advice. bScope BS.9880 microscope illumination – Euromex Köhler attachment for even field lighting The bScope BS.9880 is a compact microscope illumination unit designed for routine laboratory and educational microscopy, incorporating a Köhler attachment to provide even, controllable lighting across the observation field. Köhler attachment for uniform illumination Compact lamp for benchtop microscope setups Suitable for educational and routine labs Easy integration with bScope microscope series Better images through controlled Köhler lighting The inclusion of a Köhler attachment ensures uniform illumination across the field of view, a key factor for reliable image interpretation. Köhler lighting separates the light source image from the specimen plane, which results in even brightness and reduced artefacts; this makes contrast adjustments more effective and reduces the need for repeated captures. For technicians and instructors, the lighting module improves precision in routine inspections and teaching demonstrations by stabilising illumination quality. Simple integration that speeds setup and teaching Engineered as a compact illumination module, the lighting unit fits standard benchtop arrangements and is suitable for busy training rooms and laboratory benches. The design prioritises quick mounting and alignment with common observation heads, providing fast readiness for imaging tasks. This practical approach reduces downtime between experiments and lessons, enabling smoother workflows and more effective use of instrument time while keeping installation straightforward for workshop staff and laboratory technicians. Consistent operation for dependable daily use Produced by a recognised optics supplier, the lamp offers consistent performance for repetitive tasks, helping to lower the rate of retakes and improve process efficiency. The emphasis on stable, even lighting supports reproducible results in routine examinations and basic photomicrography. Combined with standard microscope stands and the bScope range, the illumination module contributes to a dependable setup that supports both educational needs and light laboratory applications. For advice on compatibility with existing microscopes or to secure supply through Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 — assistance and delivery from our European logistics hub are available promptly. Technical data Manufacturer: Euromex Article number / SKU: BS.9880 Model series: bScope Product type: Microscope illumination Facts No numeric specifications provided in the available data Special features Köhler attachment Category: Microscopy accessories – Lighting – Accessories Intended for laboratory and educational use FAQ How does the Köhler attachment improve image quality? Köhler illumination provided by the bScope BS.9880 aligns the light path so that the lamp filament is out of focus at the specimen plane, producing uniform illumination and reducing stray light, which enhances contrast and image clarity. Is this illumination suitable for teaching microscopes? Yes, the lamp is described as a compact illumination unit intended for routine laboratory and educational microscopy, making it well suited to classroom and training environments. Can the lamp be integrated with other microscope models? The lighting unit is designed for easy integration with benchtop setups and with the bScope series; compatibility with other stands depends on the mechanical interface and should be checked against instrument fittings. Where can additional technical details be obtained? Additional specifications and detailed installation information are available from the manufacturer documentation for the BS.9880 or via Metav Werkzeuge for product sourcing and technical clarification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise polarisation control, a rotatable 75 x 50 mm stage with clamps, and simple lamphouse mounting for reliable contrast enhancement in teaching and routine inspection; order the set directly via Metav Werkzeuge or contact the consultants for integration advice. Euromex Microscope polarisation set AE.5155 with rotatable stage and analyser slider The Microscope polarisation set AE.5155 is a compact kit designed to add polarisation contrast to compound microscopes for education and standard laboratory tasks. Analyser in slider for quick insertion Rotatable stage 75 x 50 mm with two clamps Mountable on X–Y stage for precise alignment Polarisation filter for lamphouse mounting Delivering clearer polarisation contrast for practical lab work The kit provides a simple route to enhanced contrast, making birefringent structures and stress patterns in samples easier to identify. The integrated analyser in a slider lets the operator insert or remove the analysing element without disturbing the sample, which reduces downtime during demonstrations or serial inspections. For users less familiar with polarisation, the combination of a polarisation filter at the lamphouse and the analyser produces orthogonal polarisation states that filter and analyse light; this basic optical principle yields visible differences in phase and intensity that reveal structural detail otherwise invisible in brightfield microscopy. Fast, reproducible sample orientation with a rotatable stage and clamps A small rotatable stage measuring 75 x 50 mm and fitted with two clamps allows repeatable angular positioning of specimens, which benefits comparative imaging and material analysis. When mounted on an X–Y stage, the assembly supports controlled translation and rotation so that the same sample area can be inspected under different polarisation angles without loss of orientation. This reduces the number of manual adjustments, speeds up workflow in teaching labs and inspection benches, and improves the consistency of results when multiple operators handle the same task. Easy integration and robust handling for teaching and routine use Installation is straightforward: the polarisation filter is mounted on the lamphouse and the analyser slides into place, so microscopes can be upgraded with minimal downtime. The kit is compact and designed for repeated use in instructional settings as well as in light industrial inspection; the modular layout supports straightforward cleaning and storage. The result is a practical accessory that extends a microscope’s capabilities without complex optical realignment, making the set a pragmatic choice where quick setup, clear polarisation effects and repeatable handling are required. For straightforward polarisation enhancement and dependable classroom or laboratory use, contact Metav Werkzeuge GmbH to arrange supply or to discuss the best mounting options for the Euromex AE.5155 polarisation kit and its compatibility with existing microscopes Technical Data Manufacturer: Euromex Manufacturer's article number: AE.5155 SKU: AE.5155 Product type: Microscope polarisation set Label: Mikroskop-Polarisationsset AE.5155 UID: AE.5155 Category path: Microscopy accessory / Contrast methods / Polarisation Core measurements Rotatable stage size: 75 x 50 mm Number of clamps: 2 Special features Polarisation kit with analyser in slider Small rotatable stage with two clamps Stage mountable on X–Y stage Polarisation filter fitted to lamphouse Source: Education PDF, page 13 FAQ What does the analyser slider do? The analyser slider in the Euromex AE.5155 permits rapid insertion and removal of the analysing element, enabling quick switching between polarised and non-polarised observation without disturbing the sample. Is the rotatable stage suitable for small specimens? Yes, the small rotatable stage (75 x 50 mm) included in the kit is intended for mounting and precisely rotating small specimens and is supplied with two clamps to secure typical slides and small mounts. Can the kit be fitted to any microscope? The kit is designed to be fitted to microscopes that allow lamphouse-mounted accessories and have an X–Y stage; compatibility depends on the model—installation details are straightforward and tailored to common educational and routine microscopes. Does the kit require optical realignment after mounting? No extensive optical realignment is necessary; the polarisation filter mounts at the lamphouse and the analyser slides into the optical path, enabling quick setup and minimal adjustment for ongoing use. Is this product intended for teaching or research environments? The set is compact and robust, making it well suited for teaching laboratories and routine inspection tasks where dependable polarisation contrast and repeatable handling are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise polarisation arrangement and straightforward retrofit to bring polarised-light contrast to existing systems; the combination of reliable optical performance and simple installation supports efficient inspection and teaching workflows. Order the Euromex kit directly via Metav Werkzeuge or ask the consultants for compatibility advice. Microscope Polarisation Kit bScope BS.9660 – polarisation kit with analyser and polariser by Euromex The Microscope Polarisation Kit bScope BS.9660 supplies a compact polarisation solution for bScope microscopes, enabling enhanced contrast for birefringent and anisotropic specimens in laboratory and teaching environments. Polarisation kit for bScope microscopes Analyser fits under microscope head Polariser mounts on lamphouse Improve contrast for birefringent materials with polarised light The kit introduces polarisation contrast by combining an analyser placed beneath the microscope head with a polariser mounted on the lamphouse. This optical arrangement produces cross-polarised illumination that reveals internal strain, crystal orientation and other anisotropic properties in samples otherwise difficult to distinguish under brightfield. For users working with mineral thin sections, fibres or polymer films, the result is a clearer separation of features and faster identification of structure, while retaining compatibility with existing optical paths. Fast retrofit with secure optical alignment, reducing downtime Designed for integration with the bScope series, the kit is configured to fit without major modifications, allowing a swift upgrade from standard illumination to polarised-light inspection. The analyser under the head and the polariser on the lamphouse are positioned to preserve parfocality and image alignment, so recalibration is minimal and instrument availability is maximised. This pragmatic approach reduces lost production or teaching time and preserves the original performance of the base microscope. Broadened application range for teaching, QC and research Adding polarisation capability extends the instrument’s usefulness across education, quality control and basic research. The enhanced visualisation assists in demonstrating optical properties to students, supports nondestructive evaluation of components and aids material characterisation in lab routines. By enabling these applications from a single accessory, the kit increases the versatility of the microscope and supports a wider variety of inspection tasks without the need for multiple specialised systems. Dependable integration with the bScope series and Euromex optics As part of the bScope line, this polarisation kit benefits from Euromex’s established design approach for education and laboratory microscopes, focusing on practical optical solutions and repeatable results. The accessory is supplied as a dedicated kit matched to the series’ mechanical interfaces, helping to ensure consistent optical behaviour and straightforward installation. If further technical details or alignment specifications are required, Metav Werkzeuge can provide additional documentation and advice by e‑mail or telephone. Choose the Euromex bScope BS.9660 polarisation kit for robust polarised-light capability — contact Metav Werkzeuge for individual compatibility checks and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS.9660 SKU: BS.9660 Brand: Euromex Series: bScope Product type: Microscope polarisation kit Facts Manufacturer article number: BS.9660 UID: BS.9660 Special features Polarisation kit: analyser under head and polariser on lamphouse Category path: Microscopy accessories > Contrast techniques > Polarisation Description label: Microscope polarisation set bScope BS.9660 FAQ What does the kit include and how is it arranged optically? The bScope BS.9660 microscope polarisation kit (Euromex, SKU BS.9660) comprises a polariser for the lamphouse and an analyser that fits under the microscope head, arranged to produce cross-polarised illumination for contrast enhancement. Which microscopes is the accessory compatible with? The accessory is intended for integration with the bScope series; compatibility should be confirmed against the specific model and optical configuration before fitting. What types of samples benefit most from polarisation? Birefringent and anisotropic materials such as mineral thin sections, fibrous materials and certain polymers reveal internal structure and stress patterns more clearly when viewed with polarised light provided by this kit. Is extensive realignment necessary after installation? The kit is designed for retrofit with minimal disruption; alignment adjustments are usually limited to fine-tuning the analyser and polariser to the optical axis to restore optimal contrast. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a straightforward polarisation solution that adds contrast capability to compatible microscope systems while keeping installation and operation simple; the kit supports routine polarisation tasks and basic birefringence observation. Order the Delphi‑X Observer DX.9660 polarisation kit directly via Metav Werkzeuge or consult their product advisers for compatibility details. Delphi‑X Observer DX.9660 — Microscope Polarisation Kit (Euromex) for Basic Polarisation A Delphi‑X Observer DX.9660 polarisation kit designed to introduce basic polarisation contrast to Delphi‑X Observer microscopes for life‑science and educational applications. Simple polarisation enhancement for microscopes Designed for Delphi‑X Observer series compatibility Suited for basic birefringence observation Compact kit for straightforward integration Increased contrast for birefringent samples with minimal setup The Delphi‑X Observer DX.9660 is presented as a simple polarisation kit that brings polarised‑light capability to compatible microscope platforms. By introducing a polarisation path into the illumination and detection chain, the attachment enables enhanced visibility of birefringent structures and stress patterns in transparent specimens. The description positions the product for routine laboratory and classroom use where a compact, easy‑to‑deploy solution is preferred over full‑scale polarising microscopes. Technical familiarity with the principles of polarised light is adequate; the kit's purpose is to enable contrast improvement rather than advanced quantitative polarimetry. Practical benefit: straightforward integration for routine workflows As a compact polarisation solution, the kit focuses on seamless adoption within existing microscope setups of the same series. Integration reduces the need for complex optical alignment, which supports faster inspection cycles and greater throughput for basic polarisation tasks. Operators benefit from improved sample differentiation under cross‑polarised conditions, permitting clearer identification of features that are otherwise difficult to resolve in brightfield. The design intent is to supply a pragmatic upgrade path for teams requiring polarisation contrast without investing in a dedicated polarising microscope. Reliable choice for education and basic laboratory applications The product's emphasis on simplicity and compatibility positions it as a pragmatic tool for teaching laboratories, routine life‑science investigations and preliminary quality checks. The term simple polarisation kit underlines a focus on accessibility and ease of use rather than exhaustive feature sets. Documentation referenced in the source material identifies the item as suitable for augmenting contrast in standard transmitted‑light workflows. Where advanced polarimetric measurements are required, alternative instrumentation should be considered, but for many standard tasks the kit provides immediate visual benefits with minimal change to existing procedures (Source: Life Science PDF, pages 26, 49). Contact Metav Werkzeuge for purchase and compatibility confirmation concerning the Delphi‑X Observer DX.9660 polarisation kit and to discuss delivery options from Emmerich. Technical Data Article number: DX.9660 SKU: DX.9660 Model series: Delphi‑X Observer Brand: Euromex Product type: Microscope polarisation kit Label: Mikroskop‑Polarisationsset Delphi‑X Observer DX.9660 Description: Mikroskop‑Polarisationsset Delphi‑X Observer DX.9660 Facts No numerical or dimensional data provided Special features Simple polarisation kit Source reference: Life Science PDF (pages 26, 49) Intended for Delphi‑X Observer series compatibility FAQ What is the primary purpose of the Delphi‑X Observer DX.9660? The Delphi‑X Observer DX.9660 is a simple polarisation kit intended to provide basic polarisation contrast for compatible Delphi‑X Observer microscopes, improving visibility of birefringent structures under transmitted light. Is the kit suitable for advanced polarimetric measurements? The product is described as a simple polarisation kit and is optimised for basic contrast enhancement rather than precise polarimetric quantification; specialised polarimeters are recommended for advanced measurement tasks. Which microscope models is the kit intended to work with? The dataset specifies the Delphi‑X Observer series as the target platform; the kit is presented for use with microscopes of that model series. Are the individual components of the polarisation kit listed? The available data identifies the item as a simple polarisation kit but does not provide a parts list or itemised contents in the supplied fields. What sample types benefit most from this polarisation kit? Samples exhibiting birefringence—such as crystalline materials, certain polymers and structurally anisotropic biological specimens—will show enhanced contrast when viewed with the polarisation capability offered by this kit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the aluminium case and sturdy carrying solution to protect sensitive optical instruments during transport; order the BioBlue.Lab BB.9900 directly via Metav Werkzeuge or consult our specialists for application advice. BioBlue.Lab BB.9900 – microscope transport case with aluminium shell The BioBlue.Lab BB.9900 is a purpose-built microscope transport case offering a robust outer shell and secure storage for microscopy equipment in laboratory and education settings Aluminium case Designed for microscopes Secure transport protection Durable protection that preserves optical performance The aluminium case construction delivers a hard-wearing outer layer that shields instruments against impacts and environmental wear. For laboratories and teaching facilities that move microscopes between rooms or sites, this rigid shell reduces the risk of shock and abrasion during handling. The design focuses on safeguarding delicate optical and mechanical components so that instruments remain calibration-ready after transit. With the emphasis on robust protection, the case supports reliable equipment uptime and reduces downtime caused by accidental damage. Practical transport and organised storage for fragile instruments A transport solution should combine mobility with stability; this case provides a compact, manageable format for moving microscopes between locations. As a specialised transport case for microscopes, the unit simplifies logistics for mobile labs, fieldwork and classroom use by keeping components consolidated during transit. The format supports efficient storage and rapid deployment of instruments when needed, helping maintain operational flow in fast-paced or multi-location environments while preserving instrument condition. Confidence in supply and suitability for professional use Sourced as part of the BioBlue.Lab series, the BB.9900 pairs material reliability with a clear application focus on microscope transport. Purchasing through an experienced distributor ensures traceable provenance and consistent delivery. Metav’s role as a central supplier provides access to stock and complementary workshop products, enabling workshops and educational facilities to centralise procurement and reduce supplier complexity. This supply approach supports consistent availability and predictable logistics for repeat purchases. For detailed compatibility information or to request a specification sheet for the BioBlue.Lab BB.9900, contact Metav Werkzeuge GmbH in Emmerich; technical advisors are available to advise on fitting and transport solutions Technical data Article number: BB.9900 SKU: BB.9900 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope transport case Facts No numeric data available Special features Aluminium case Source: Education PDF; Life Science PDF FAQ What is the primary purpose of this transport case? The BioBlue.Lab BB.9900 is designed for secure transport and storage of microscopes, offering a rigid outer shell to protect delicate instrumentation during movement. Which material is used for the outer shell? The case features an aluminium case construction, noted in the product documentation as the principal material for the exterior. Is the BB.9900 suitable for classroom and field use? Yes, the BB.9900 is presented as a transport case suited to laboratory, education and field applications where moving microscopes safely is required. Can the BB.9900 be combined with other workshop products from the same supplier? Procurement via Metav Werkzeuge allows the BB.9900 to be ordered alongside other workshop and microscopy accessories to streamline supply and ensure compatibility. Where can technical questions about the case be directed? Technical or compatibility questions can be referred to Metav Werkzeuge’s advisory service, which can provide additional documentation and guidance on use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Robust aluminium construction and clear model identification reduce handling risk and simplify stock management; the lightweight design supports secure transport and practical storage. Benefit from reliable compatibility with the bScope series and logistical clarity via SKU BS.9900. Order the microscope transport case bScope BS.9900 directly via Metav Werkzeuge or ask our consultants if needed. Microscope transport case bScope BS.9900 — aluminium construction, protective storage The Microscope transport case bScope BS.9900 is a purpose-designed aluminium transport case intended for safe handling, transport and storage of microscopes and related optics within laboratory and field environments. Aluminium construction for durable protection Designed for microscope transport and storage Model identification BS.9900 for easy ordering Compatible with bScope series instruments Secure protection that preserves instrument performance The aluminium shell offers a balance of strength and manageable weight, enabling safe movement of delicate instruments without adding unnecessary bulk. An aluminium transport case resists corrosion and provides a stable outer barrier, which contributes to robust protection during transit. For workshops and educational facilities that rely on accurate measurement and observation, safeguarding optical alignment and mechanical components is essential; a dedicated transport case reduces the risk of shock and contamination that can degrade instrument performance over time. Clear model labelling supports inventory control and reduces handling errors in busy workflows. Streamlined logistics for workshop and field use A compact protective case simplifies logistics for teams that alternate between laboratory benches and external sites. The case's design supports efficient stacking and identification in storage areas, allowing faster retrieval and reduced downtime for precision tasks. By integrating a recognised model code such as BS.9900 into procurement and asset registers, managers gain a measurable improvement in stock traceability and transport planning. This pragmatic approach minimises interruptions to production and ensures microscopy equipment is available where and when it is needed, supporting continuous operational reliability. Compatibility and clarity that support precise workflows Selecting the correct transport solution reduces repair interventions and downtime. The bScope designation indicates compatibility with a range of the brand’s microscopes, which simplifies ordering and ensures consistent protective standards across instrument fleets. Marked and indexed transport cases help standardise handling procedures, which benefits quality assurance and audit processes. For facilities that prioritise precision, a uniform protective strategy for microscopes and accessories protects investments and preserves measurement integrity over the long term. For secure transport and clearer asset management, choose the bScope BS.9900 — consult Metav Werkzeuge for stock availability and ordering via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: BS.9900 SKU: BS.9900 Brand: Euromex Model series: bScope Product type: Microscope transport case Facts Measurements: not specified Weight: not specified Special features Material: aluminium transport case Application: transport and storage of microscopes Category: Transport cases; microscopy accessories Source: Education PDF; Life Science PDF FAQ What is the primary purpose of this transport case? The microscope transport case bScope BS.9900 is designed to provide a durable outer shell for safe transport and storage of microscopes. Which brand and series does the case correspond to? This product is supplied under the Euromex bScope series and marked with SKU BS.9900 for clear identification. Is the case suitable for field use as well as laboratory storage? Yes, the aluminium construction of the BS.9900 supports both laboratory storage and the logistical demands of field handling. Are internal fixtures or foam inserts included with the case? The product description identifies the item as an aluminium transport case; details on internal fittings are not specified in the available data. How does the BS.9900 support inventory and ordering processes? The clear model designation and SKU BS.9900 enable straightforward inventory tracking and ordering, reducing administrative errors in equipment management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise green filtration and guaranteed compatibility with the Achios‑X Observer series to improve image contrast and workflow reliability; order the AX.9702 directly via Metav Werkzeuge or request consultant support for integration and availability. Achios‑X Observer AX.9702 microscope filter by Euromex — green optical filter for contrast enhancement Achios‑X Observer AX.9702 is a green filter designed for microscopy use with the Achios‑X Observer series, delivering targeted spectral filtration for enhanced contrast in routine laboratory and teaching applications. Green filter for enhanced contrast Compatible with Achios‑X Observer series Euromex original spare part AX.9702 Simple slot‑in installation for filter holders Enhanced contrast for routine inspections The green filter offers a reliable way to accentuate specific details by selectively transmitting the green portion of the spectrum. For routine inspection and documentation this targeted filtration improves visual separation of structures on brightfield or contrast‑enhanced methods. The result is a cleaner image that reduces time spent on subjective adjustments and supports faster, more consistent observations. Seamless integration with the Achios‑X Observer series Designed for compatibility with the Achios‑X Observer range, this filter is sized for standard filter mounts used in the series and fits as an original spare part. Integration is straightforward: the component slides into existing housings without modification, maintaining mechanical alignment and optical path integrity. This compatibility minimises downtime and keeps the instrument configuration consistent across workflows. Optical reliability and handling benefits The component is intended as a durable optical accessory that preserves image fidelity through consistent spectral characteristics. Optical clarity is maintained across repeated use when basic cleaning routines are followed, and the robust construction supports frequent handling in busy laboratories and educational settings. When replaced as part of a maintenance schedule, the filter helps sustain predictable imaging results. Practical guidance for selection and use For many laboratories the main considerations are spectral match and mechanical fit; this filter addresses both by providing a defined green transmission and matching form factor for the Achios‑X Observer family. If further technical data or compatibility checks are required, Metav Werkzeuge offers guidance and can provide additional specifications to ensure the component meets the intended application. Contact Metav Werkzeuge for stock information and technical advice on integrating the Achios‑X Observer AX.9702 into existing setups, or ask our consultants for compatibility confirmation and delivery options. Technical data Article number: AX.9702 Brand: Euromex Product type: Microscope filter Model series: Achios‑X Observer Colour designation: Green filter Source reference: Life Science PDF, p. 21 Specifications No dimensional or numerical data provided in the source Special features Green filter for targeted spectral transmission Original Euromex spare part Designed for Achios‑X Observer filter housings Simple slot‑in installation FAQ Is the filter compatible with other Achios‑X Observer models? The Achios‑X Observer AX.9702 is intended for the Achios‑X Observer series and fits standard filter mounts used in that range; confirm mechanical fit if a non‑standard housing is in use. What does "green filter" mean for imaging? A green filter transmits primarily the green portion of the light spectrum, improving contrast for structures that respond strongly in that band when used with the Achios‑X Observer AX.9702 microscope filter. How should the filter be cleaned and maintained? Gentle cleaning with lens tissue and appropriate optical cleaner is recommended to preserve the optical surface of the AX.9702; avoid abrasive materials and strong solvents. Can this filter be used for fluorescence applications? The AX.9702 is specified as a green filter; suitability for fluorescence depends on the excitation and emission wavelengths of the setup—check spectral requirements before use. Is the AX.9702 an original manufacturer spare part? Yes, the AX.9702 is listed as an original Euromex spare part for the Achios‑X Observer series Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Opt for a compact discussion head that fits into standard microscope systems and is supplied without eyepieces for flexible configuration; when ordered already mounted, it is delivered with two eyepieces, enabling immediate optical use. Order the AE.5511 directly via Metav Werkzeuge or consult Metav's specialists for technical compatibility and delivery. Microscope head AE.5511 — Discussion head without eyepieces (Euromex) The microscope head AE.5511 is a discussion head designed for integration into microscope setups where a modular optical interface and flexible eyepiece configuration are required. Discussion head, supplied without eyepieces Compatible with standard microscope tubes Delivered with two eyepieces when mounted Consistent optical interface for shared workspaces and teaching The discussion head provides a stable optical junction suitable for collaborative observation and instruction. By separating the head from eyepieces when supplied, the design enables laboratories and education facilities to standardise on specific oculars or optical accessories, while preserving the principal optical alignment. This approach reduces the need for extensive reconfiguration when the head is transferred between stands and supports efficient multi-user workflows. The construction focuses on a repeatable optical interface and straightforward mechanical coupling to reduce downtime during changeovers. Flexible supply options that match installation requirements The product is delivered either as a head-only unit or, if ordered mounted on a microscope, with two eyepieces included to permit immediate operation. This flexibility supports different procurement and inventory strategies: spare heads can be stocked separately, while complete mounted assemblies are available for rapid commissioning. The modular supply concept minimises procurement complexity for workshops and training centres and aligns with common workshop logistics where components may be sourced or standardised independently. Practical maintenance and long-term usability Materials and connections are designed to support routine maintenance and stable performance over time. The mechanical interfaces are kept simple to enable quick inspection and replacement without specialised tooling. Using a head that is purposely modular reduces the risk of misalignment during servicing and supports predictable maintenance intervals. For facilities requiring consistent visual performance across multiple instruments, this configuration contributes to a reliable optical baseline and lowers the operational overhead associated with frequent adjustments. Contact Metav Werkzeuge for compatibility checks, ordering options and delivery details for the AE.5511 microscope head; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AE.5511 SKU: AE.5511 Product type: Microscope head Brand: Euromex Label: Microscope head AE.5511 Facts No numerical specifications provided Special features Discussion head; eyepieces not included Supplied with two eyepieces when mounted on microscope Category: Microscopy accessories / Miscellaneous / Heads & tubes Source reference: Education PDF (discussion head without eyepieces; delivered with two eyepieces when mounted) FAQ What type of head is this and how is it supplied? The AE.5511 is a discussion head supplied without eyepieces; when ordered mounted on a microscope, it is delivered with two eyepieces. Can the head be used on different microscope stands? Compatibility depends on the mechanical tube and coupling standards; the head is designed for standard optical interfaces and Metav Werkzeuge can confirm fit for specific stands. Are eyepieces included with the AE.5511 by default? Eyepieces are not included in the head-only supply; two eyepieces are included when the head is supplied already mounted on a microscope. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact LED replacement unit that restores consistent microscope illumination and maintains instrument availability; the module corresponds to article number BS.9993 and can be ordered via Metav Werkzeuge for fast supply from Emmerich. NeoLED replacement unit BS.9993 – Microscope replacement lamp, LED module (Euromex) The NeoLED replacement unit BS.9993 is a purpose-made replacement LED module for microscope illumination, suitable for laboratory, teaching and routine inspection applications. NeoLED replacement unit for microscopes Fits article number BS.9993 Compact LED illumination module Reliable illumination that stabilises imaging quality The replacement unit restores consistent microscope illumination when the original lamp has reached its end of service, ensuring that visual inspection and documentation remain dependable. Designed as a direct spare part for the specified article number, the module supports steady LED light output that reduces flicker and uneven brightness. For technicians and lab managers this translates into fewer interrupted workflows and more reproducible visual results during sample examination. Why LED technology matters for routine microscopy Modern LED modules deliver homogenous light without warm-up delays and consume far less energy than legacy incandescent sources; this improves instrument readiness and reduces heat load on delicate samples. The NeoLED unit works as an exchangeable light source for microscope stands and carries the practical advantage of consistent colour rendering for visual assessment. In plain terms, an LED module provides clearer, more uniform illumination that helps users see fine detail without frequent adjustment or calibration. Straightforward replacement to keep instruments productive The unit has been developed as a spare illumination module to be installed in compatible microscope housings; this approach minimises downtime by allowing rapid replacement of a failed lamp. Given its role as a direct spare part, the module simplifies maintenance routines and reduces the need for temporary workarounds. Maintenance teams benefit from predictable stocking and a straightforward spare-part identification via the article number BS.9993. Suited to labs, education and routine inspection environments This illumination module is appropriate for environments where reliable light quality is a baseline requirement—teaching labs, inspection benches and general microscopy workstations. As a replacement part from Euromex, the unit supports continuity of operations and aligns with procurement practices that favour readily identifiable spare parts. Keeping such spare units on hand reduces the risk of extended instrument downtime and supports ongoing quality assurance processes. Contact Metav Werkzeuge for supply of the NeoLED replacement unit BS.9993; orders and enquiries are handled from our Emmerich location—email info@metav-werkzeuge.com or call +49 2822 7131930 for delivery and availability information Technical data Article number: BS.9993 Manufacturer article number: BS.9993 SKU: BS.9993 Facts No numerical specifications provided Special features Product type: Microscope replacement lamp Description: NeoLED replacement unit Label: NeoLED-Ersatzeinheit BS.9993 Manufacturer: Euromex FAQ What is the NeoLED replacement unit compatible with? The NeoLED replacement unit BS.9993 is a spare illumination module intended for use in compatible microscope housings where the original NeoLED lamp is specified. Does the unit use LED technology and what benefit does that give? Yes, the unit is an LED module; the NeoLED replacement unit provides uniform light output, reduced heat generation and immediate operation without warm-up, supporting reliable microscopy. How is the spare part identified when ordering? Order the spare by referring to article number BS.9993 or SKU BS.9993; both identifiers correspond to the NeoLED replacement unit from Euromex. Is this replacement suitable for teaching and inspection laboratories? The NeoLED module is suitable for teaching, inspection and general laboratory use where consistent microscope illumination is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from stable, low-heat LED illumination and a factory-compatible design that keeps imaging reliable and maintenance predictable; order the NeoLED replacement unit directly via Metav Werkzeuge or consult their specialists for compatibility advice. NeoLED replacement unit for iScope IS.9993 — Euromex microscope replacement lamp with LED illumination The NeoLED replacement unit for iScope IS.9993 is a factory-compatible microscope replacement lamp designed to restore original illumination characteristics in iScope instruments. NeoLED replacement for iScope Factory-compatible Euromex design Stable LED illumination, low heat Compact module for rapid swap Dependable LED lighting for consistent imaging The NeoLED replacement unit for iScope IS.9993 provides stable, LED-based illumination tailored for routine microscopy. Its LED light source delivers a consistent colour rendition and lower heat emission compared with traditional bulbs, helping to protect delicate specimens and reduce thermal load on optical elements. The factory-compatible construction preserves original mounting geometry, supporting reproducible imaging and fewer interruptions to laboratory workflows. Straightforward replacement that supports uptime As a direct replacement module, the unit is intended to fit the original lamp housing and minimise post-installation alignment work. The compact assembly simplifies inventory handling and reduces downtime during service interventions. Because the module relies on solid-state illumination, users can expect longer service life than many conventional lamp types, which contributes to more predictable maintenance planning in production or teaching environments. Clear identification and workshop compatibility Listed under SKU IS.9993 and categorised within microscopy lighting, the module is easy to locate in procurement systems and parts lists. Euromex manufacturing practices and labelling aid traceability and spare-part management across workshops and service departments. Adopting LED-based replacements supports lower energy consumption and fewer lamp changes, which streamlines supply-chain logistics and reduces the frequency of routine replacements. For a factory-matching Euromex replacement and expert ordering guidance, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — to confirm availability and ensure seamless integration into existing iScope equipment Technical data Article number: IS.9993 SKU: IS.9993 Manufacturer: Euromex Product type: microscope replacement lamp Image: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1c/a5/f1/6a/6af1a51cd8ecf2f60acae07a/IS.9993.jpg Facts No numerical specifications provided Special features NeoLED replacement unit for iScope Compatible with iScope lamp housing Label: NeoLED-Ersatzeinheit für iScope IS.9993 Gallery ID: 6af1a51cd8ecf2f60acae07a FAQ Is this lamp compatible with all iScope models? The NeoLED replacement unit for iScope IS.9993 is specified as a replacement for iScope housings; compatibility should be confirmed against the exact iScope model designation before purchase. What type of light source is used in this module? The module uses an LED light source; the NeoLED replacement unit from Euromex (SKU IS.9993) provides stable, solid-state illumination instead of a filament or halogen lamp. Will installation require optical realignment? The NeoLED replacement unit for iScope IS.9993 is designed for factory-compatible mounting to minimise adjustment; minor alignment checks are advisable after installation. Is the replacement lamp easy to identify for stock management? Yes, the product is listed as IS.9993 and appears in the microscopy lighting category, which simplifies procurement and inventory tracking. Does the module reduce maintenance frequency compared with traditional bulbs? LED-based illumination in the NeoLED replacement unit typically results in fewer lamp changes and reduced maintenance intervals compared with conventional light sources. Manufacturer / Responsible: Euromex; Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Enhance darkfield imaging on NexiusZoom microscopes with the Euromex Darkfield Attachment NZ.9040 — a purpose-built darkfield module that integrates with NexiusZoom systems to provide reliable contrast enhancement. Order this dedicated module via Metav Werkzeuge or consult our specialists for compatibility advice. Euromex Darkfield Attachment for NexiusZoom NZ.9040 — Darkfield module for NexiusZoom The Darkfield Attachment for NexiusZoom NZ.9040 is a purpose-built darkfield module for NexiusZoom microscopes, enabling darkfield contrast imaging. Darkfield contrast module for microscopy Compatible with NexiusZoom microscope systems Euromex original part NZ.9040 Enhanced contrast where transparent detail matters Darkfield illumination reveals features that remain invisible under standard brightfield lighting by emphasising light scattered by the specimen. As a dedicated darkfield module, this attachment increases visibility of fine edges, particles and surface irregularities without staining. The result is a clearer image of low-contrast samples, making defect detection and surface inspection more reliable while preserving the existing optical train. Direct compatibility reduces integration effort Designed for the NexiusZoom series, the module ensures optical alignment and mechanical fit with the host system. The NexiusZoom-compatible design and Euromex origin mean the NZ.9040 matches the intended mounting interfaces and optical geometry, safeguarding image quality and reproducibility. This compatibility simplifies procurement decisions and reduces the need for custom adaptors during installation. Practical use in inspection and microscopy workflows The module is suitable for routine quality checks, material inspection and any microscopy workflow that benefits from scattered-light contrast. Installation of a darkfield module can reduce preparation time since many samples that would otherwise require staining become visible directly. For further technical clarification or specific application advice, the supplier can provide guidance on selecting the correct contrast method for a given inspection task. Contact Metav Werkzeuge for procurement and compatibility checks of the Euromex Darkfield Attachment NZ.9040 — Metav’s specialists in Emmerich can advise on fitment and supply to ensure smooth integration into existing NexiusZoom setups. Technical data Article number: NZ.9040 SKU: NZ.9040 Brand: Euromex Product type: Darkfield attachment Core technical data No measurable numerical data provided in the product file Special features and versions Darkfield contrast method Compatibility: NexiusZoom systems Category: Microscopy accessories › Contrast methods › Darkfield Image: NZ.9040.jpg (gallery available) FAQ What does a darkfield attachment do? A darkfield attachment creates contrast by capturing light scattered by the specimen; the Euromex Darkfield Attachment NZ.9040 highlights edges and particulates that are faint in brightfield images. Is the NZ.9040 compatible with all NexiusZoom models? The NZ.9040 is specified for NexiusZoom systems; confirm compatibility with the exact NexiusZoom model to ensure mechanical and optical fit. Which sample types benefit most from darkfield imaging? Transparent or low-contrast specimens, fine fibres, surface contaminants and small particulates are typical subjects that benefit from darkfield using the Euromex NZ.9040. Does the attachment require changes to the existing objective or illumination? Installation is intended to work with the NexiusZoom optical path; verify that the microscope’s condenser and illumination settings are appropriate for darkfield operation before use. How should the darkfield module be maintained? Keep optical surfaces clean and handle components with care; follow standard microscope care procedures to preserve image quality when using the Euromex NZ.9040. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise optical protection and straightforward replacement to keep inspection work uninterrupted; the combination of reliable shielding and compatibility with NexiusZoom stereo heads supports consistent image quality in routine microscopy. Order the protective glass directly via Metav Werkzeuge or consult their specialists for fit and supply. Protective Glass for NexiusZoom Stereo Heads NZ.8950 — Euromex protective cover for stereo microscope heads The Protective Glass for NexiusZoom Stereo Heads NZ.8950 is designed to shield the viewing optics of NexiusZoom stereomicroscope heads during inspection and handling in laboratory and industrial environments. Compatible with NexiusZoom stereo heads High optical clarity protective glass Simple, quick replacement Guards optics from dust and contact Maintain clear optics for reliable inspection The Protective Glass for NexiusZoom Stereo Heads NZ.8950 offers a straightforward way to preserve optical protection and maintain consistent image quality during routine work. By placing a dedicated cover in front of the stereo head, surface contamination from dust, fingerprints or incidental splashes is limited, so cleaning cycles become less frequent and contrast and resolution are retained. This is particularly important in serial inspection tasks where repeatable visual results reduce rework and inspection variability. Minimise downtime with quick replacement Engineered for ease of service, the cover enables quick replacement without complex disassembly of the stereo head, which reduces machine downtime and keeps workflows running smoothly. A readily replaceable protective element means that if the glass becomes scratched or soiled, it can be swapped rapidly, restoring full optical performance without lengthy interruptions. The practical benefit is improved throughput and fewer delays in inspection or assembly lines that rely on stereomicroscopy. Built to protect in laboratory and industrial settings Constructed for routine use at the workstation, the cover provides dependable protection against everyday hazards encountered in labs and production floors. The protective glass preserves the stereo head’s sensitive optics while allowing unaltered light transmission and minimal influence on the viewing path. For engineers, quality managers and technicians, this yields greater confidence in measurement and inspection results and supports a cleaner, safer working environment. For secure, compatible protective glass from Euromex, choose the NZ.8950 and contact Metav Werkzeuge for ordering and technical guidance — supply from Emmerich with expert consultation: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: NZ.8950 SKU: NZ.8950 Product type: microscope protective glass Brand: Euromex Image file size: 106596 bytes Suitable for NexiusZoom stereo heads Label: Schutzglas für NexiusZoom Stereoköpfe NZ.8950 Image file name: NZ.8950.jpg FAQ Is this cover compatible with all NexiusZoom stereo head variants? The protective glass NZ.8950 is intended specifically for the NexiusZoom stereo heads as described and will fit the designated head models produced for that series. Does the protective glass affect image quality or magnification? When clean and correctly installed, the protective glass preserves image transmission and does not alter magnification; the NZ.8950 is designed to maintain optical clarity for inspection tasks. How is the cover best cleaned without risking damage? Gentle cleaning with a lint-free cloth and optical-grade solution is recommended to avoid scratches; routine maintenance of the NZ.8950 reduces the need for frequent full head cleaning. How quickly can the protective glass be replaced on the stereo head? Replacement is designed to be fast and simple to reduce downtime, allowing the NZ.8950 to be swapped with minimal tools and no lengthy disassembly. Is the protective glass suitable for industrial inspection environments? Yes — the protective glass provides an extra barrier against particulate contamination and incidental contact, supporting consistent inspection results in laboratory and industrial settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The Euromex specimen stage AE.1877 combines a purposeful design as a microscope accessory with clear identification for stock and ordering; its compact article reference makes it straightforward to document and replace within laboratory inventories. Order details and specialist advice are available from Metav Werkzeuge should further integration guidance be required. Specimen stage AE.1877 — Euromex accessory for microscopes The specimen stage AE.1877 serves as a dedicated object stage for microscopes, intended to support reliable specimen placement and routine microscopy tasks. Specimen stage AE.1877 by Euromex For microscope accessory applications Article number AE.1877 Stable support that simplifies routine microscopy A dedicated specimen stage delivers consistent positioning and handling for routine inspection tasks; this reduces repositioning time and helps maintain a steady workflow at the bench. By using a purpose-made accessory from an established supplier, laboratories benefit from improved repeatability when preparing samples, and the accessory integrates into standard microscopy processes without requiring specialised training. The result is a small but tangible improvement in day-to-day operational efficiency. Easy identification and straightforward inventory control Marked clearly as AE.1877, the object stage is ready to be logged in inventory systems and cross-referenced with procurement records. Clear labelling and a consistent article reference support traceability in busy workshops and teaching environments, where fast replacement or stock checks matter. The accessory’s role as a microscope add-on means integration into existing kits or instrument sets is uncomplicated, helping to keep documentation and asset lists concise. Confidence through a reliable supply partner Sourcing accessories via an experienced distributor supports dependable supply and transparent logistics. Metav’s positioning as a partner for precision tools emphasises accessibility to measurement and microscope accessories for industry and craft alike. Choosing established distribution channels helps ensure that documentation, order handling and delivery are managed predictably, supporting continuity at the workplace and reducing procurement complexity. Contact Metav Werkzeuge for advice on integrating the Euromex specimen stage AE.1877 into existing microscopy setups — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Manufacturer: Euromex Article number: AE.1877 Product type: Specimen stage SKU: AE.1877 Facts Categories: For microscopes Label: Objekttisch AE.1877 UID: AE.1877 No numerical specifications provided in source data Special features Intended use: Microscope accessory for specimen support Gallery: not provided Further product information: listed in image captions only FAQ What is the primary purpose of this accessory? The Euromex specimen stage AE.1877 is an object stage intended to support and position specimens for microscopy applications. Which microscopes is the stage suited for? The stage is described as an accessory for microscopes and is therefore suitable for setups that accept a dedicated object stage; compatibility depends on the specific instrument mounting and intended workflow. Where can further technical details be found? Technical values and further product information are noted as being provided only in image captions in the source material; full specifications should be requested from the supplier if required. What is the article number and manufacturer? Article number and SKU are listed as AE.1877 and the manufacturer is Euromex. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of oil‑immersion darkfield illumination and precise integration with the Delphi‑X Observer series for clearer specimen contrast and reliable replacement. Order the condenser or consult Metav Werkzeuge for product matching and delivery. Delphi‑X Observer DX.9112 condenser — oil‑immersion darkfield condenser by Euromex A Delphi‑X Observer DX.9112 condenser designed for darkfield microscopy with oil immersion, engineered to enhance contrast for unstained or low‑contrast specimens in life‑science and materials inspection. Oil‑immersion darkfield illumination Designed for Delphi‑X Observer series Enhanced specimen contrast for low‑visibility samples SKU DX.9112 for exact identification Enhanced contrast through oil‑immersion darkfield optics The condenser is built to provide darkfield illumination using an oil‑immersion interface, which directs scattered light from the specimen into the objective while suppressing background illumination. This optical arrangement delivers high contrast for transparent or weakly absorbing samples, making structures such as fine fibres, particulates and cell boundaries clearly visible without staining. The principle relies on oblique illumination and a properly matched immersion medium to increase the angular range of light reaching the specimen and the objective, resulting in a pronounced bright‑on‑dark appearance that aids both visual inspection and imaging. Reliable fit and identification for Delphi‑X Observer installations Specified for the Delphi‑X Observer family, the accessory is identified as DX.9112 to ensure correct replacement and catalogue matching. The design facilitates integration with the optical path of compatible microscope stands, preserving alignment and illumination geometry essential for consistent darkfield performance. Where system compatibility is critical, the clear SKU and model‑series reference support procurement and inventory control, reducing the risk of incorrect parts and downtime in laboratory workflows. Practical benefits for life‑science and materials applications By enhancing visibility of minute features, the condenser supports a range of tasks from particle detection and cell morphology to quality inspection of fine surface defects. The contrast improvement reduces the need for preparative staining in many cases, speeding sample throughput and protecting sample integrity. For routine laboratory use, the component contributes to reproducible observation conditions and can assist both manual examination and digital documentation workflows when paired with appropriate objectives and cameras. Care and handling to preserve optical performance To maintain the condenser’s performance, standard oil‑immersion handling procedures are recommended: use a microscope‑grade immersion oil compatible with the optics, remove oil promptly after use and clean optical surfaces with appropriate lens tissue and cleaning fluid. Regular inspection for residues and careful mounting within the observer stand will help preserve contrast quality and prevent image artefacts. Proper maintenance prolongs service life and ensures that darkfield illumination continues to deliver the diagnostic detail required in microscopy tasks. Contact Metav Werkzeuge for advice on compatibility and to acquire the Euromex Delphi‑X Observer DX.9112 condenser; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultation and supply from Emmerich Technical Data Article number: DX.9112 Brand: Euromex Model series: Delphi‑X Observer Product type: Condenser Category: Darkfield (microscopy accessory) Facts SKU: DX.9112 UID: DX.9112 Special features Oil‑immersion darkfield condenser Source: Life Science PDF S. 26 Intended for Delphi‑X Observer series FAQ What is the main purpose of this condenser? The Euromex Delphi‑X Observer DX.9112 condenser is intended to provide oil‑immersion darkfield illumination for improved contrast of transparent or low‑contrast specimens. Is the condenser compatible with all Delphi‑X Observer microscopes? Compatibility is indicated by the Delphi‑X Observer series designation; the DX.9112 condenser matches the optical requirements of the Delphi‑X Observer family but system verification is recommended prior to installation. Can other immersion media be used with this condenser? The condenser is specified for oil‑immersion darkfield operation; use of alternative immersion media may alter optical performance and is not recommended without verification. Does the product include mounting hardware or accessories? The description specifies the condenser as the component DX.9112; further included items are not listed and should be confirmed when procuring the Euromex condenser. How should the condenser be cleaned after use? Clean optical surfaces with microscope‑grade lens tissue and appropriate cleaning fluid after removing immersion oil; follow established laboratory procedures to avoid damage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Secure specimen handling and repeatable stage positioning are achieved by combining robust clamps with straightforward stage mounting; the result is reliable sample control for routine inspection and educational use. Order the Euromex stage clamps directly via Metav Werkzeuge or ask our consultants for procurement advice. Euromex EduBlue ED.9570 – Pair of Object Clamps for Microscope Stage, for Stereomicroscopes The EduBlue ED.9570 is a pair of object clamps for stage mounting, designed to hold small specimens securely on stereomicroscopes during inspection and manipulation. Pair for stage mounting Suitable for stereomicroscopes Secure specimen holding Simple, repeatable positioning Built for consistent specimen security and repeatability The object clamps provide a straightforward method to secure samples on a microscope stage, reducing movement during observation and minor handling. By keeping the specimen steady, the clamps improve repeatability of visual inspections and measurements, which is particularly important in training environments or quality-control benches. The clamping arrangement is suitable where reliable holding is required without complex fixture systems, supporting efficient workflows across routine laboratory and workshop tasks. Designed to match stereomicroscope workflows Intended for use with stereomicroscopes, the clamps fit into common stage configurations and complement binocular inspection setups. Their function is to maintain specimen position while allowing quick release and repositioning, which shortens handling time and increases throughput for repetitive tasks. The design emphasises practical compatibility rather than unnecessary complexity, making the clamps an effective accessory for both educational settings and precision inspection stations. Practical handling and benefits for everyday use As a small but essential accessory, the pair of clamps simplifies specimen preparation and stabilisation. The arrangement supports delicate components during soldering inspection, biological dissections in teaching, or visual quality checks on small mechanical parts. By providing secure holding, the clamps reduce the risk of specimen loss or damage during handling and contribute to a calmer, more controlled working process—important when consistent visual assessment is required. Procurement confidence and integration into supply chains Sourcing the clamps through an established distributor ensures quality control and reliable delivery. Purchasing via a trusted partner reduces administrative overhead and provides access to a broader range of compatible accessories, which supports effective workshop stocking. The clamps are an economical addition to any microscopy toolkit where secure, repeatable positioning of small items is needed. Contact Metav Werkzeuge for procurement of the Euromex EduBlue ED.9570 and for tailored advice on integrating these clamps into laboratory or workshop setups. Technical Data Manufacturer: Euromex Article number: ED.9570 Model series: EduBlue Product type: Object clamps for microscope stage SKU: ED.9570 Facts Quantity: pair Special features For stereomicroscopes Stage mounting Pair of clamps for specimen securing FAQ What is included with the product? The product is supplied as a pair of object clamps for stage use; the designation is Euromex EduBlue ED.9570. Which microscopes are these clamps suitable for? The clamps are specified for use with stereomicroscopes and are intended to secure small specimens on the stage during observation. Can the clamps be used for precise measurement tasks? The clamps are designed to hold specimens steady to aid visual inspection and repeatable positioning; specific metrological performance depends on the overall setup and stage used. Are mounting details and dimensions provided? Mounting method is indicated as stage mounting; detailed dimensions and fixing specifications are not listed in the provided data. Is the product suitable for educational environments? The pair of clamps is well suited to teaching and demonstration contexts where reliable specimen holding and rapid handling are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, purpose-built clamp set that ensures secure specimen holding on standard stages while simplifying sample changes; order the pair directly via Metav Werkzeuge or consult our specialists for compatibility queries. Pair of Specimen Clamps for Standard Object Table NZ.9570 – Euromex microscope specimen clamp, for stereomicroscope stages Pair of Specimen Clamps for Standard Object Table NZ.9570 provides stable sample fixation for stereo inspection and workshop measurement tasks on a standard object table Pair for standard object table Designed for stereomicroscope stages Microscope specimen clamp, Euromex NZ.9570 Reliable sample holding for routine inspection Stable positioning that speeds up inspection workflows The specimen clamps are designed to secure samples quickly on a standard object table, cutting the time needed for repeated adjustments. The paired clamps allow for two-point fixation, which improves lateral stability during stereo observation or when performing minor manipulations. This steadiness translates into fewer refocusing cycles and less reorientation of the sample, increasing throughput in routine inspection tasks and small-batch quality checks. Seamless compatibility with stereomicroscope stages Compatibility with stereomicroscope stages is an essential practical benefit of this clamp set. The clamping geometry fits standard stage slots and common stage edges used in benchtop microscopy, enabling immediate integration without modifications. That compatibility reduces setup complexity and avoids the need for custom adapters, meaning the clamp set can be introduced into existing inspection rigs with minimal interruption to production or laboratory routines. Practical advantages for workshop and laboratory environments Beyond secure holding, the design supports rapid specimen changes and repeatable positioning, which is particularly useful for comparative inspections and educational demonstrations. The compact nature of the clamps keeps the working area accessible and visible under low magnification, while the paired configuration assists with orienting irregularly shaped parts. Where recording or measurement follows visual inspection, the predictable fixture behaviour contributes to consistent imaging and reproducible results. For secure specimen handling, choose the Euromex NZ.9570 pair via Metav Werkzeuge — contact Metav Werkzeuge GmbH for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: NZ.9570 SKU: NZ.9570 Brand: Euromex Product type: Microscope specimen clamp Facts Pieces: 2 (pair) Special features Compatible with stereomicroscope stages Suitable for standard object table Pair configuration for two-point fixation FAQ Are these clamps suitable for all stereomicroscopes? The Euromex NZ.9570 clamps are designed for compatibility with standard stereomicroscope stages; compatibility with a specific model depends on the stage design and slot dimensions. How are samples fixed with the clamp pair? Samples are held by two clamping points that provide lateral stability and repeatable positioning for routine inspection and small manipulations. Is the material or coating specified for these clamps? The available product information lists the item as a pair of specimen clamps; specific material or coating details are not provided in the data set. Can these clamps be used for comparative imaging and measurement tasks? Yes, the paired configuration and standard-stage compatibility make the clamps suitable for comparative inspections, imaging and repeatable measurement setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, OEM accessory that ensures stable specimen holding and clear identification for procurement — the Pair of Specimen Clamps for StereoBlue SB.9570 offers straightforward compatibility with StereoBlue stereomicroscopes; order directly via Metav Werkzeuge or consult our team for precise fit guidance. Pair of Specimen Clamps for StereoBlue SB.9570 — Microscope Accessory by Euromex The Pair of Specimen Clamps for StereoBlue SB.9570 is an accessory designed to provide reliable specimen holding for StereoBlue stereomicroscopes in laboratory and workshop environments. Pair for StereoBlue stereomicroscopes Euromex original accessory SKU SB.9570 for easy ordering Stable specimen holding for repeatable observations The supplied pair of specimen clamps is configured to secure small samples reliably under a stereomicroscope, reducing unintended movement during inspection and manipulation. By keeping the object steady, the clamps contribute to improved visual inspection and more consistent measurement or documentation results. For users working across multiple samples, the accessory supports reproducible positioning, which reduces rework and speeds up routine workflows. Clear compatibility and simple procurement Designed specifically for StereoBlue models, the clamps are identified as SB.9570, simplifying ordering and parts management. The original Euromex accessory designation helps procurement teams and instrument technicians to match components unambiguously, minimising downtime caused by part uncertainty. Where mounting standards or adapter requirements exist, the explicit compatibility note supports fast verification and integration into existing microscopy setups. Practical accessory for everyday microscopy tasks As a dedicated microscope accessory, the pair of clamps complements common laboratory and workshop tasks such as sample preparation, delicate handling, and visual quality checks. The straightforward design focuses on the core benefit of secure holding without introducing unnecessary complexity, making it suitable for routine inspections and educational use alike. Where precise observation is essential, these clamps help maintain focus stability and reduce the need for repeated adjustments. For original Euromex SB.9570 specimen clamps and expert advice on compatibility, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fit and arrange prompt supply Technical Data Article number: SB.9570 Manufacturer: Euromex Product type: Microscope specimen clamp SKU: SB.9570 Facts Compatible with StereoBlue stereomicroscopes Special features Pair of specimen clamps Euromex original accessory Category: For stereomicroscopes – microscopy accessories FAQ Which microscopes are these clamps compatible with? The clamps were supplied as an accessory for StereoBlue stereomicroscopes and are identified as SB.9570, indicating direct compatibility for StereoBlue models. Are the clamps supplied as a set? Yes, the product is a pair of specimen clamps, provided together for simultaneous use or for keeping a spare. Can these clamps improve observation stability? The clamps are intended to secure specimens under a stereomicroscope, helping to reduce movement and enabling steadier visual inspection with the StereoBlue setup. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the phase‑centred optical design and series compatibility: the Achios‑X Observer AX.9148 improves contrast for transparent, unstained samples while supporting consistent alignment within phase‑contrast workflows. Order the AX.9148 directly via Metav Werkzeuge or consult our specialists for integration advice. Achios‑X Observer AX.9148 Phase‑centred telescope by Euromex The Achios‑X Observer AX.9148 is a phase‑centred telescope engineered for phase contrast microscopy, intended to enhance image contrast of unstained, transparent specimens in research and routine laboratory environments. Phase‑centred optical design Compatible with Achios‑X Observer series Optimised for unstained specimens SKU AX.9148 for easy identification Improved contrast for unstained, transparent samples The phase‑centred telescope uses an optical layout that is specifically targeted at extracting phase differences from transparent specimens. By emphasising phase shifts rather than amplitude, the module delivers enhanced contrast for live cells and thin sections without staining. This benefit reduces the need for additional sample preparation and allows clearer observation of structures that would otherwise be difficult to discern. The result is a tangible productivity gain in microscopy tasks that rely on visual clarity rather than chemical contrast. Consistent alignment and dependable imaging workflow Designed as a component within the Achios‑X Observer series, the unit supports reproducible optical alignment and stable imaging across sessions. The phase‑centred approach assists technicians and researchers in maintaining a stable phase ring match between condenser and objective, which translates into fewer adjustments and less downtime. Laboratories benefit from smoother workflows and predictable results, particularly in routine quality checks or time‑lapse observations where consistency is essential. Practical laboratory advantages and applicability As an accessory for phase contrast setups, the telescope is suitable for educational, clinical and research settings where non‑invasive observation is required. The device emphasises precision and repeatability, supporting a range of common microscopy tasks without altering specimen integrity. Integration into existing phase‑contrast systems is straightforward when compatibility with the Achios‑X Observer series is observed, enabling teams to focus on analysis rather than instrument troubleshooting. Contact Metav Werkzeuge to discuss how the Euromex Achios‑X Observer AX.9148 can be integrated into existing microscopy equipment; Metav Werkzeuge’s consultants are available to advise on compatibility and configuration via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: AX.9148 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Phase‑centred telescope SKU: AX.9148 Category: Phase contrast Facts No numeric specifications provided Special features Phase‑centred optical design Intended for phase contrast microscopy Part of the Achios‑X Observer series FAQ What is the primary purpose of this phase‑centred telescope? The phase‑centred telescope AX.9148 is intended to enhance contrast in phase contrast microscopy, making transparent, unstained samples easier to observe. Is the AX.9148 compatible with standard phase contrast condensers? Compatibility is expected within the Achios‑X Observer series; the AX.9148 is designed to integrate with phase contrast setups of that family. Which sample types benefit most from the phase‑centred design? Live cells, thin tissue sections and other transparent specimens gain the most from the phase‑centred optical approach of the AX.9148. Who manufactures the Achios‑X Observer AX.9148? The Achios‑X Observer AX.9148 is produced by Euromex and supplied as part of the Achios‑X Observer series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise phase contrast imaging, compatibility with 20x and S100x oil PLPH objectives, and straightforward integration into iScope microscopy workflows. Order the accessory directly via Metav Werkzeuge or consult their specialists for technical guidance. Phase contrast accessory iScope IS.9161 — Slider set with annuli for 20x and S100x oil PLPH objectives (Euromex) The Phase contrast accessory iScope IS.9161 provides phase contrast capability for compatible iScope microscopes, enabling high-contrast observation of unstained, transparent specimens using specified oil PLPH objectives. Compatible with 20x and S100x oil PLPH objectives Includes phase contrast annuli for precise imaging Designed for iScope microscope series Enables high-contrast live cell observation Improved visibility for transparent samples without staining Phase contrast converts optical phase shifts produced by transparent structures into intensity differences, allowing clear visualisation of cells and thin sections without dyes. The supplied annuli are matched to oil PLPH objectives at 20x and S100x magnifications, which preserves specimen integrity and reduces preparation time. For laboratory workflows where sample preservation and rapid observation matter, this accessory offers a direct technical route to enhanced contrast and reliable morphological assessment. Seamless integration with iScope optics for routine workflows The slider set is engineered for compatibility with the iScope series and accepts the corresponding oil PLPH objectives, ensuring correct alignment of condenser annuli and objective phase rings. Correct pairing of annulus and objective minimises halo artefacts and optimises contrast, which is particularly beneficial in teaching laboratories and diagnostic routines. The configuration supports consistent imaging results and faster setup, reducing downtime between observations and improving throughput. Practical benefits for live-cell and diagnostic applications By enabling phase contrast on existing microscopes, the accessory supports non-invasive monitoring of living cultures and dynamic processes in real time. The combination of matched annuli and oil PLPH objectives enhances edge definition and detail resolution for thin, low-contrast specimens. This accessory is therefore well suited to applications where sample viability and quick decision-making are priorities, delivering technical advantage through targeted optical matching rather than electronic image processing. For phase contrast applications requiring matched 20x and S100x oil PLPH performance, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com, +49 2822 7131930 — Metav’s specialists will assist with compatibility checks and delivery. Technical data Article number: IS.9161 Manufacturer: Euromex Product type: Phase contrast accessory Series: iScope Facts Compatible magnifications: 20x; S100x (oil PLPH) Includes annuli for 20x and S100x oil PLPH objectives Special features Phase contrast slider set Annuli matched to 20x / S100x oil PLPH objectives Source: Life Science PDF, pages 16 and 42 FAQ What objectives are supported by this accessory? The phase contrast accessory iScope IS.9161 is supplied with annuli matched specifically to 20x and S100x oil PLPH objectives for correct phase alignment. Can the accessory be used for live-cell observation? Yes, the slider set supports non-invasive live-cell and culture monitoring when used with the matching oil PLPH objectives, allowing dynamic processes to be observed without staining. Is the accessory compatible with all iScope microscope models? The accessory is designed for the iScope series; compatibility depends on the microscope’s condenser and objective configuration—check the iScope specifications to confirm alignment. Does the set include both annuli and objectives? The accessory includes the phase contrast annuli matched to 20x and S100x oil PLPH objectives; objective availability should be verified separately if not already present on the microscope. How does correct annulus-objective pairing affect image quality? Proper pairing of annuli and objective phase rings reduces halo artefacts and improves contrast and edge definition, which is essential for accurate morphological assessment. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com