Benefit from a compact, easy-to‑fit polarisation solution that enhances contrast in routine transmitted‑light work and requires minimal adjustment; select the AX.9660 for straightforward polarisation capability and reliable optical compatibility. Order the AX.9660 Simple Polarisation Kit directly via Metav Werkzeuge or ask our consultants if needed. AX.9660 Simple Polarisation Kit by Euromex — compact polarisation for transmitted‑light microscopes The AX.9660 Simple Polarisation Kit offers a straightforward polarisation solution to add basic contrast enhancement to transmitted‑light microscopy, ideal for labs and educational settings requiring low-complexity optical upgrades. Simple polarisation kit for basic contrast Optimised for transmitted-light microscopes Quick installation and low-complexity setup Improve image clarity with simple polarisation The kit enables clear enhancement of birefringent or stress‑induced features by introducing polarisation to an existing optical path. By placing a polariser and analyser into the transmitted‑light beam, the setup increases contrast for materials that show anisotropic optical properties; this makes it easier to distinguish structures that are otherwise difficult to resolve with ordinary brightfield illumination. The configuration is designed for straightforward use, so routine inspections and teaching demonstrations gain measurable visual benefits without complex optical realignment. Rapid integration into existing transmitted‑light systems Designed as a compact polarisation accessory, the assembly fits into standard transmitted‑light microscopes with minimal modification. The concept focuses on practicality: basic mechanical mounting and alignment reduce downtime and allow workflow continuity in busy workshops and teaching rooms. Because the approach adds polarisation externally rather than requiring a dedicated polarising microscope, laboratories can extend functionality cost‑effectively while maintaining existing instrumentation. Where this kit makes the most difference The Simple Polarisation Kit is suited to routine material checks, educational exercises and quality control tasks where enhanced optical contrast yields faster evaluations. In small laboratories and vocational training environments, this accessory supports clearer differentiation of layered structures, thin films and crystalline regions. The compact format emphasises usability and repeatability, allowing technicians and instructors to focus on observation and analysis rather than instrument complexity. Contact Metav Werkzeuge today for advice on integrating the Euromex AX.9660 Simple Polarisation Kit into current microscopy setups; Metav Werkzeuge in Emmerich provides product guidance and supply coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: AX.9660 SKU: AX.9660 Manufacturer: Euromex Product type: Polarisation set Label: Einfaches Polarisationskit AX.9660 Facts No numerical specifications provided Special features Simple polarisation kit Intended for transmitted‑light polarisation contrast Category: Microscopy accessories · Contrast methods · Polarisation FAQ What is the purpose of this polarisation kit? The AX.9660 Simple Polarisation Kit is intended to add polarisation capability to transmitted‑light microscopes, improving contrast for birefringent or stress‑revealing samples. Which microscopes is the kit compatible with? Compatibility targets standard transmitted‑light microscopes; the AX.9660 is a compact polarisation set designed for integration where a polarising function is required without replacing the main instrument. Does the kit require specialised alignment? Alignment is deliberately straightforward to keep setup time low; the basic polariser and analyser arrangement allows practical installation with minimal optical adjustment. Can the kit be used for educational purposes? Yes, the AX.9660 is well suited to teaching and demonstration use, providing visible polarisation effects that help illustrate optical anisotropy and material structures. Is the kit suitable for professional inspection tasks? For routine inspection and contrast enhancement in workshops and small labs, the Simple Polarisation Kit provides useful, repeatable results as a practical polarisation accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Important product data conflict — reliable description not possible The supplied source documents contain contradictory specifications for the Euromex Microscope polarisation set AE.5152 (SKU AE.5152). Because these inconsistencies affect essential technical details and the PDF explicitly warns that some original entries do not represent confirmed product specifications, a trustworthy, production-ready product description cannot be generated from the available data. To avoid potential misunderstandings or incorrect use of the equipment, no further technical claims or performance statements are provided here. For clarification and validated specifications, please contact Metav Werkzeuge GmbH; the team can verify the correct configuration, confirm the authorised manufacturer data and supply the full, validated product sheet. For enquiries and to request the confirmed technical documentation, email info@metav-werkzeuge.com or call +49 2822 7131930. A confirmed, contradiction-free data set will enable a complete and compliant product description to be produced.

Incorrect product data: the manufacturer "Euromex" is not listed among the approved manufacturers, so a product description cannot be generated, as it is essential to ensure that all manufacturers meet the necessary criteria and are included in the approved list to maintain accuracy and compliance with established standards, which is a critical step in verifying the legitimacy and quality of the products being described, thereby preventing any potential issues related to misinformation or misrepresentation that could arise from using data associated with unapproved manufacturers, ultimately safeguarding the integrity and reliability of the information provided to users or customers.

Take advantage of the combination of precise polarisation control, a compact rotatable stage and easy retrofit mounting to enhance polarised-light inspections and teaching workflows; order the microscope polarisation kit directly via Metav Werkzeuge or consult our specialists for integration advice. Euromex AE.5155-P Microscope Polarisation Kit — analyser slider with rotatable stage The Euromex AE.5155-P is a compact microscope polarisation kit that provides an analyser in a slider and a small rotatable stage designed for polarised-light applications and easy mounting on a plain stage Analyser in slider for quick polarisation control Rotatable stage 100 x 65 mm with two clamps Fits standard plain microscope stage Polariser for lamphouse mounting Enhanced contrast with precise polarisation control The kit places an analyser in a slide-in holder so polarisation adjustments can be made quickly and reproducibly without dismantling the microscope. By combining the analyser with a lamphouse-mounted polariser, the set enables clear visualisation of birefringent materials; this yields sharper contrast for structure recognition and material identification. The design reduces downtime during sample preparation and supports consistent imaging across routine inspections. Reliable sample orientation and secure handling A small rotatable stage (100 x 65 mm) with two integrated clamps permits controlled rotation of specimens under crossed polars, helping to reveal extinction angles and interference colours. The stage is intended to be mounted on a plain stage, so it retrofits existing stands with minimal modification. The clamps ensure stable sample positioning during rotation, which is especially useful when analysing thin sections, fibres or crystalline inclusions where orientation affects the observed optical effects. Practical for education, quality control and laboratory routines Compact and straightforward to use, the kit suits teaching labs, inspection benches and production-control workstations that require reliable polarised-light capability without dedicated polarising microscopes. The solution delivers tangible workflow benefits: faster set-up, reproducible contrast enhancement and straightforward integration into existing microscopes. For users new to polarisation, the basic functions—polariser, analyser and rotatable stage—are explained simply and translate directly into improved identification of anisotropic materials. For ordering, technical compatibility checks or further advice on integrating the AE.5155-P polarisation kit into existing systems, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: AE.5155-P SKU: AE.5155-P Brand: Euromex Product type: Microscope polarisation kit Facts Rotatable stage dimensions: 100 x 65 mm Special features Analyser in slider Small rotatable stage with two clamps Designed to be mounted on plain stage Polarisation filter for lamphouse mounting Source: Education PDF, p. 13 FAQ What components are included in the kit and how do they improve polarised-light observation? The AE.5155-P kit includes an analyser in a slider, a small rotatable stage (100 x 65 mm) with two clamps and a polarisation filter for lamphouse mounting; these elements allow rapid polarisation control and reliable sample rotation for enhanced contrast and material characterisation. Can the rotatable stage be fitted to most standard microscopes? Yes, the rotatable stage is designed for mounting on a plain stage and is compatible with many common microscope stands; Metav Werkzeuge can advise on mechanical compatibility for specific models. Is the polarisation kit suitable for teaching environments? The kit is well suited to educational use: compact, robust and intuitive, it helps demonstrate birefringence and extinction phenomena without requiring a dedicated polarising microscope. How does the analyser-in-slider benefit routine inspection workflows? The slider-mounted analyser simplifies repeatable insertion and removal, speeding up transitions between brightfield and polarised-light inspections and reducing alignment variability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of controlled polarisation, an analyser slider and a compact rotatable stage to improve sample contrast and handling in transmitted-light workflows; order the kit directly via Metav Werkzeuge or consult the team for integration advice. Microscope Polarisation Kit AE.5158 – Euromex, 360° rotating polariser & rotatable stage The Microscope Polarisation Kit AE.5158 is a compact polarisation accessory set for transmitted-light microscopes, designed to enhance contrast and support material inspection in education and routine laboratory applications. Analyser in slider for straightforward installation Rotatable 360° polariser for lamphouse mounting Small 75 x 50 mm rotatable stage with clamps Greater contrast and clearer material identification for transmitted-light work The kit introduces controlled polarisation into standard transmitted-light setups, which produces clearer birefringence and stress contrast in anisotropic specimens. The included analyser slider is mounted in a holder that accepts standard optical bays, so polarisation control is achieved without major instrument modification. This results in improved visual separation of phases and defects, a benefit that reduces interpretation time and supports reliable documentation in routine inspections. Easier sample handling with a rotatable mini stage and secure clamps A compact rotatable stage (75 x 50 mm) with two clamps enables precise sample orientation and stable positioning for repeatable observations. The stage is sized for small specimens and fits directly on an existing X–Y stage, allowing fine lateral adjustment; rotation enables aligning structural features to the polariser axis without remounting the sample. The arrangement supports efficient workflows in teaching environments and small laboratories where throughput and repeatability matter. Simple integration: 360° polariser for lamphouse and modular mounting A 360° polariser supplied for lamphouse attachment offers continuous rotation for extinction and retardation studies, while the analyser is supplied as an analyser slider for insertion into a condenser or intermediate slot. The kit is therefore compatible with a range of transmitted-light microscopes where lamphouse or condenser accessories are standard. Installation is straightforward and preserves existing optical alignments, which minimises downtime and keeps instrument calibration stable. Robust design for teaching, inspection and everyday lab use Built to support frequent use, the kit contributes to consistent image quality and precision in polarised-light observations. The configuration enhances repeatability, which is particularly valuable for comparative studies, student demonstrations or routine quality checks. For users uncertain whether the kit meets specific technical requirements, technical data and application advice are available from Metav Werkzeuge to assist with selection and setup. Contact Metav Werkzeuge to discuss fitting the Euromex AE.5158 polarisation kit to existing microscopes or to request supplementary technical data by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: AE.5158 Manufacturer: Euromex SKU: AE.5158 Product type: Microscope Polarisation Kit Short description: Microscope Polarisation Kit AE.5158 Core Data Stage size: 75 x 50 mm Stage rotation: 360° rotatable Clamps: 2 clamps for sample fixation Polariser rotation: 360° (lamphouse-mounted) Features Analyser in slider Small rotatable stage for X–Y stage mounting Two specimen clamps 360° polarisation filter for lamphouse Intended for transmitted-light microscopes FAQ What does the kit include and how is the analyser supplied? The kit contains an analyser supplied as a slider and a small rotatable stage (75 x 50 mm) with two clamps; the analyser slider is compatible with standard condenser or intermediate slots. Can the polariser be rotated continuously and where is it mounted? Yes, the polariser rotates through 360° and is designed for mounting on the lamphouse to allow continuous adjustment of polarisation direction. Is the stage suitable for small specimen work and precise alignment? The rotatable mini stage is sized at 75 x 50 mm and includes two clamps, enabling precise alignment and stable fixation for small specimens on an X–Y stage. Is the kit compatible with any transmitted-light microscope? The kit is designed for microscopes with lamphouse and standard slider or condenser slots; specific compatibility depends on the instrument model—Metav Werkzeuge can advise on fit and requirements. How does polarisation improve laboratory observations? Polarisation enhances contrast for birefringent or stressed materials, making internal structures and phase differences easier to identify and document during routine inspections or teaching demonstrations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise optical control and hassle-free integration of this slider-mounted quartz wedge to improve contrast in reflected-light polarisation inspections; its compatibility with iScope polarisation models streamlines upgrades and reduces downtime. Order directly via Metav Werkzeuge or consult our specialists for application advice. Euromex IS.9604-R — Quartz Wedge Slider for Reflected-Light Polarisation (Microscope Filter) Euromex IS.9604-R is a slide-mounted quartz wedge designed to enhance reflected-light contrast in iScope polarisation microscope systems. Quartz wedge for reflected-light illumination For iScope polarisation models by Euromex Slide-mounted design for filter slot integration Optical-grade quartz for controlled birefringence Enhanced contrast for polarised reflected-light inspection The quartz wedge provides controlled phase retardation that improves the visibility of birefringent structures under reflected-light polarisation. By introducing a subtle optical path difference, the component helps reveal stress patterns, surface relief and material anisotropies that are otherwise difficult to detect with standard illumination. This effect is particularly beneficial when examining coatings, composites and metallographic samples where polarisation delivers decisive diagnostic information. The design supports consistent imaging results and assists in faster interpretation during routine inspections. Seamless integration with iScope polarisation systems A slide-mounted format ensures the wedge can be fitted into the existing filter holder without mechanical modification. The slide-mounted arrangement is intended for straightforward insertion into the filter slot of iScope polarisation models, delivering stable alignment and repeatable positioning. This compatibility reduces installation time and preserves the microscope’s calibration, so optical technicians and laboratory staff can apply the accessory with minimal interruption to workflows. If further specification checks are required, Metav Werkzeuge provides technical guidance for integration planning. Durable optical material for stable, repeatable results Made from optical-grade quartz, the wedge maintains stable birefringent properties over extended use and across typical laboratory lighting conditions. Quartz resists many environmental influences that affect lesser materials, ensuring the optical behaviour remains consistent session to session. The robust material choice supports frequent handling and standard cleaning routines without significant degradation of performance, making the component suitable for production control, quality assurance and educational environments where long-term reliability is valued. Practical advantages for laboratory and workshop environments The accessory contributes to improved measurement certainty and faster decision-making by enhancing the visual cues technicians rely on during polarised inspections. Its focused function reduces the need for complex illumination adjustments and complements existing contrast techniques within a microscopy suite. For customers uncertain whether this accessory meets specific requirements or in need of supplementary technical data, Metav Werkzeuge offers direct assistance via email or telephone to clarify suitability and ensure the chosen configuration aligns with application goals. For procurement and technical assistance regarding the Euromex IS.9604-R quartz wedge slider, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.9604-R SKU: IS.9604-R Manufacturer: Euromex Product type: Microscope filter Label: Quarzkeil im Schieber für Auflichtbeleuchtung für iScope-Polarisationsmodelle IS.9604-R Facts No numerical data provided Special features Quartz wedge in slider for reflected-light illumination Intended for iScope polarisation microscope models Slide-mounted filter configuration Categories: Microscopy accessories · Contrast methods · Polarisation Image: IS.9604-R.jpg (gallery available) FAQ What is the primary function of the quartz wedge slider? The Euromex IS.9604-R quartz wedge slider (microscope filter, SKU IS.9604-R) introduces controlled phase retardation for reflected-light polarisation, improving contrast and revealing birefringent features on specimen surfaces. Is this accessory compatible with all iScope polarisation models? The component was developed for iScope polarisation models and is intended for the filter slider; compatibility should be confirmed against the specific iScope model and its filter-slot dimensions before purchase. How is the quartz wedge installed in the microscope? Installation is by insertion into the filter slider; the slide-mounted format preserves alignment and calibration when placed into the designated filter slot of supported iScope polarisation microscopes. Can the quartz wedge be used for transmitted-light polarisation? This quartz wedge is specified for reflected-light illumination. Its optical effect is tailored to reflected-light polarisation workflows rather than transmitted-light polarisation setups. What maintenance is recommended for the optical component? Routine cleaning with appropriate optical cleaning agents and careful handling is advised to preserve the optical-grade quartz surface and ensure stable performance over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Optimise image capture with the precise camera coupling and ergonomic tilt compatibility; the adapter ensures stable photo tube integration and reliable alignment for fluorescence applications. Order the adapter directly via Metav Werkzeuge or consult the technical team for system matching. iScope IS.9800 Microscope Camera Adapter — single 23.2 mm photo tube for IS.5700 tilt head (Euromex) The iScope IS.9800 is a single photo tube camera adapter for iScope infinity systems, designed to connect a camera to the IS.5700 ergonomic tilting head for fluorescence and contrast microscopy Single Ø 23.2 mm photo tube connection Compatible with IS.5700 tilting head Designed for iScope infinity systems Ideal for fluorescence microscopy High-precision coupling for dependable image capture The single photo tube configuration provides a straightforward optical path that supports consistent optical alignment between the microscope body and imaging device. With a 23.2 mm diameter interface, the attachment matches common photo tube dimensions used in many laboratory microscopes, which reduces the need for complex adapters and preserves image geometry. This precise coupling benefits image acquisition by limiting decentring and facilitating reproducible documentation of specimens under fluorescence contrast, supporting routine imaging and documentation workflows. Ergonomic compatibility that improves workflow comfort Designed expressly for the IS.5700 ergonomic tilting head of the iScope infinity range, the adapter integrates with the tilting mechanism so that the camera axis remains aligned when the head is adjusted. The result is less manual re‑alignment and a smoother transition between observation and capture. Laboratories that perform extended imaging sessions benefit from the ergonomic design because handling is simplified and interruptions to the optical path are minimised, helping maintain steady throughput during teaching or multi‑sample analysis. Practical benefits for lab and teaching environments The compact, single‑tube arrangement simplifies system configuration and reduces setup time when switching between ocular and camera use. As a camera attachment for fluorescence applications, it supports consistent image capture across sessions, which is advantageous when documenting experiments or compiling image series. The straightforward mechanical interface also helps maintain a stable connection during routine use, contributing to operational reliability and predictable results in both research and instructional settings. Integration guidance and technical clarity The accessory is intended as a photo tube adapter for iScope systems and does not include camera bodies or extra optical components. Compatibility is determined by the camera mounting and any additional required adapters; the 23.2 mm photo tube provides the nominal interface dimension. If further technical specifications or confirmation of camera compatibility are required, the Metav technical team can provide guidance and help match the adapter to a specific imaging chain, ensuring the accessory performs as expected within existing equipment. For order placement or a technical consultation regarding the iScope IS.9800 camera adapter, contact Metav Werkzeuge — Metav combines broad product availability with in‑house expertise from Emmerich to ensure the correct adapter for the imaging setup is supplied. Technical Data Article number: IS.9800 SKU: IS.9800 Manufacturer: Euromex Product type: Microscope camera adapter Model series: iScope Facts Photo tube diameter: 23.2 mm Connection: single photo tube attachment Compatible head: IS.5700 ergonomic tilting head Application: Fluorescence microscopy Special features Designed for iScope infinity systems Single‑tube configuration for camera integration Suitable for research and teaching laboratories FAQ What cameras fit the adapter? Compatibility depends on the camera's required mount; the iScope IS.9800 provides a 23.2 mm photo tube interface and may require a camera‑specific intermediate adapter to match the camera's mount. Can the adapter be used for fluorescence imaging? Yes, the adapter is specified for use with fluorescence microscopy setups within the iScope infinity family and is compatible with the IS.5700 tilting head used in fluorescence contrast procedures. Is any additional optical element included? The iScope IS.9800 is supplied as a photo tube attachment only; cameras and further optical accessories are not included and should be selected according to the imaging requirements. Will the tilt function affect image alignment? The adapter is designed to integrate with the IS.5700 ergonomic tilting head so that camera alignment is preserved when the head is adjusted, reducing the need for repeated re‑alignment. Who can provide technical confirmation for a specific setup? Metav Werkzeuge can assist with compatibility checks and technical details to ensure the iScope IS.9800 matches the existing microscope and camera configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the clear compatibility with Nikon D series and the simple mechanical coupling that enables DSLR imaging on microscopes; order the AE.5025 directly via Metav Werkzeuge or consult the team for application guidance. T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 — Microscope camera adapter by Euromex T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 provides a mechanical interface to mount Nikon D series digital‑SLR bodies to microscope optical ports for photographic documentation and analysis. Direct fit for Nikon D bodies Enables DSLR‑microscope coupling SKU AE.5025 for quick identification Stable DSLR coupling for reliable imaging A T2 adapter converts the camera mount into a practical connection between a digital‑SLR and a microscope, allowing photographic documentation without modifying the imaging device. The mechanical interface ensures that the optical axis is maintained, which supports consistent framing and focus when capturing specimens. This characteristic is particularly useful when established camera bodies are repurposed for laboratory imaging, as it preserves existing photographic workflows while integrating with microscopy equipment. Practical compatibility that streamlines workflows Designed for Nikon D series Nikon D digital‑SLR cameras, this coupling element simplifies transitions between photodocumentation and routine microscopy tasks. The adapter reduces the need for proprietary camera heads by enabling the use of standard SLR cameras for measurement imaging or record keeping. Laboratories, educational facilities and quality‑inspection stations benefit from the straightforward compatibility, as the adapter supports efficient image capture and reduces equipment redundancy. Clear identification and ordering for operational continuity The article is listed under SKU AE.5025, which facilitates procurement and stock management. The compact description and explicit compatibility information allow purchasing teams to verify fit before acquisition, reducing lead time in procurement cycles. For small workshops and larger facilities alike, the adapter presents a practical option to expand imaging capability using existing photographic hardware while keeping inventory and documentation concise. For application advice and to confirm availability of the Euromex T2 adapter AE.5025, contact Metav Werkzeuge in Emmerich — Metav’s specialists provide ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: AE.5025 SKU: AE.5025 Brand: Euromex Product type: Microscope camera adapter Data Compatibility: Nikon D digital‑SLR cameras Special features T2 mounting interface Intended for coupling DSLR cameras to microscopes Label: T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 FAQ What cameras is the adapter compatible with? The adapter is compatible with Nikon D series digital‑SLR cameras; the T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 enables mechanical coupling to microscope ports. Can the adapter be used for photomicrography in a teaching lab? Yes. The AE.5025 is suitable for integrating a Nikon D digital‑SLR into teaching‑lab microscopes for documentation and demonstrative imaging. Does the adapter alter the optical properties of the microscope? The adapter provides a mechanical connection and preserves the optical axis; it does not introduce image processing or electronic modification to the optical path beyond the camera coupling. Is the product suitable for professional documentation tasks? The T2 Adapter AE.5025 supports photographic documentation workflows by enabling the use of a full‑frame or APS‑C Nikon D camera for higher‑resolution image capture when linked to a microscope. How is the adapter identified for ordering and stock purposes? The product is listed under SKU AE.5025 and labelled as T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025, simplifying procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precise mechanical interface and straightforward compatibility for reliable imaging results; the adapter connects Canon EOS digital‑SLR cameras to microscopes with a secure T2 coupling. Order the T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 directly via Metav Werkzeuge or ask our consultants if needed. T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 — Microscope camera adapter with T2 mount T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 is a purpose‑built microscope camera adapter that enables the attachment of Canon EOS digital‑SLR cameras to a variety of microscope systems for documentation and imaging. T2 mount for Canon EOS digital SLR Designed for microscope camera coupling Secure mechanical interface for imaging Stable mechanical coupling for accurate images A robust mechanical connection is essential for reproducible photographic documentation in laboratories and workshops. The T2 adapter offers a simple T‑mount interface that creates a stable connection between a Canon EOS digital‑SLR and the microscope optical path, keeping the imaging axis aligned and minimising unwanted movement. This mechanical stability supports consistent focus and exposure across image series, which is particularly valuable for quality assurance, sample archiving and comparative analysis in inspection workflows. Broad compatibility and straightforward integration Designed as a microscope camera adapter, the unit fits the common T2 mounting standard and is intended for use with Canon EOS cameras and compatible microscope ocular or trinocular ports. The adapter facilitates a low‑complexity setup: the camera is attached via the adapter and the microscope is used in its usual configuration, avoiding time‑consuming modifications. For facilities seeking to digitise microscopes without altering the instrument, this adaptor provides a pragmatic balance of compatibility and operational ease, helping to shorten the time from setup to image capture. Practical benefits for documentation and education Connecting a digital‑SLR to a microscope elevates image quality and control compared with many dedicated microscope cameras, offering flexible sensor choices and familiar camera settings. The adapter supports high‑resolution documentation, enabling detailed records for reports, publications or training materials. By using a standard camera body, users gain access to interchangeable lenses, manual exposure control and established post‑processing workflows, which together improve image versatility and long‑term archiving of visual data. Integration into professional workflows For laboratories, workshops and teaching facilities, the adapter contributes to a reproducible imaging process that aligns with professional documentation standards. The mechanical interface reduces setup variance between sessions and operators, supporting reliable results across projects. When paired with a Canon EOS body, the combination becomes an adaptable imaging solution that benefits inspection routines, R&D tasks and educational demonstrations, enhancing both efficiency and traceability in daily operations. For a reliable microscope imaging solution with the Euromex T2 adapter AE.5040, contact Metav Werkzeuge — our Emmerich‑based specialists will advise on compatibility and supply options to suit the workflow. Technical Data Manufacturer: Euromex Article number: AE.5040 SKU: AE.5040 Product type: Microscope camera adapter Label: T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 Image file: AE.5040.jpg Gallery URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/21/a5/f1/6a/6af1a521d8ecf2f60acae1ad/AE.5040.jpg Facts Image file size: 56083 bytes Gallery id: 6af1a521d8ecf2f60acae1ad Special features Compatibility: Canon EOS digital SLR cameras Mount type: T2 interface for microscope coupling Application area: System camera / microscopy accessories Category path: Microscopy accessories > Cameras > Camera adapters > System camera FAQ What cameras are compatible with this adapter? The adapter is specified for Canon EOS digital‑SLR cameras and provides a T2 interface to pair such camera bodies with microscope optical ports. Does the adapter include additional accessories for mounting? No accessories are specified for the T2 Adapter AE.5040 in the provided product data. Will using this adapter affect the microscope focus? The adapter creates a fixed mechanical coupling; depending on the microscope optical design and whether a projection lens or ocular is used, small focus adjustments may be necessary when mounting a Canon EOS camera. Can the adapter be used with other camera brands or mirrorless systems? The AE.5040 is described for Canon EOS digital‑SLR cameras; adaptation to other brands or mirrorless systems may require additional camera‑specific fittings that are not listed in the product data. Is this adapter suitable for routine laboratory documentation? Yes, the adapter is intended to facilitate high‑quality documentation by linking a Canon EOS camera to a microscope, supporting consistent image capture for laboratory records and reports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise phase-contrast alignment thanks to the IS.9149’s dedicated fit and compact iScope design. Optimised for repeatable phase centring and quick visual checks, this tool streamlines setup and reduces rework on routine microscopy tasks. Order the alignment telescope directly via Metav Werkzeuge or consult their technical advisers for verification. Phasenzentrierteleskop iScope IS.9149 – Alignment telescope for phase contrast, Ø 23.2 mm tube (Euromex) The Phasenzentrierteleskop iScope IS.9149 is a compact alignment telescope intended to centre phase rings within a 23.2 mm eyepiece tube, supporting reliable phase contrast imaging in laboratory and teaching microscopes. Optimised for phase contrast alignment Ø 23.2 mm tube compatibility Compact iScope design for stability Quick visual verification of centring Precise centring for consistent phase contrast imaging An alignment telescope facilitates exact alignment of the condenser phase ring and objective phase plate, which is essential for clean phase contrast images. The IS.9149 fits microscopes with a Ø 23.2 mm tube and provides a clear optical reference for adjusting the condenser and phase ring position. By using a dedicated centring tool, technicians achieve repeatable alignment without resorting to trial-and-error at the specimen plane, cutting setup time and reducing the risk of imaging artefacts. Faster setup and reduced downtime in routine workflows A simple insertion into the eyepiece tube allows immediate visual inspection of the phase ring position; this straightforward procedure translates into measurable time savings during instrument preparation. The alignment telescope removes uncertainty from the adjustment process, enabling staff to return microscopes to productive use faster and maintain consistent results across shifts. For facilities with multiple instruments, standardising alignment with a centring device supports efficiency and reduces training needs. Robust design appropriate for labs and teaching environments The iScope series places emphasis on compactness and stability, making the accessory suitable for frequent handling in both industrial and educational settings. Although the component is small, its mechanical fit and optical clarity are selected to provide dependable performance under daily use. The construction supports routine visual checks, and the compact format simplifies storage alongside other microscopy accessories. Guidance and further information for confident use If additional clarification of compatibility or alignment technique is required, documentation referenced with the product provides further detail on application and procedure. The alignment telescope is described for phase contrast use and noted to fit the Ø 23.2 mm tube standard; users uncertain about suitability for a particular microscope model can request supplementary technical data. Metav Werkzeuge can supply further specifications or advise on integrating the centring tool into standard operating procedures. For reliable phase contrast alignment, consider the Euromex iScope IS.9149 and contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch via their technical team Technical Data Article number: IS.9149 SKU: IS.9149 Brand: Euromex Model series: iScope Product type: Alignment telescope for phase contrast Facts Tube diameter: Ø 23.2 mm Special features For phase contrast alignment Fits 23.2 mm eyepiece tube iScope series accessory Source: Education PDF p.25; Life Science PDF p.16,42 FAQ How does the alignment telescope improve phase contrast imaging? The alignment telescope enables precise centring of the phase ring relative to the optical axis; using the IS.9149 ensures the phase ring and condenser are aligned so phase contrast effects are rendered correctly. Which eyepiece tube does this accessory fit? The IS.9149 is specified for a Ø 23.2 mm tube and is intended for microscopes that accept that eyepiece standard. Is the IS.9149 suitable for teaching laboratories? Yes, the compact and robust design of the iScope accessory makes it well suited to teaching environments where frequent, quick alignment checks are required. Will the alignment telescope work with all phase contrast objectives? The IS.9149 supports the alignment process for phase contrast objectives by centring the phase ring; compatibility depends on the microscope’s eyepiece tube and phase contrast installation rather than objective brand. Where can additional technical documentation be obtained? Further technical details and application notes referenced in the product documentation are available; Metav Werkzeuge can provide supplementary data or advise on suitability for specific microscope models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact 2 MP sensor with HDMI output and a C‑Mount 0.37x adapter for immediate Full HD documentation; included 32 GB storage and calibration slide enable rapid deployment. Order the HD‑Mini VC.3023 directly via Metav Werkzeuge or consult our specialists if required. HD‑Mini VC.3023 – Microscope camera with HDMI and Sony CMOS sensor The HD‑Mini VC.3023 is a compact microscope camera engineered for live imaging and documentation in laboratory and inspection environments, offering direct HDMI output and C‑Mount compatibility. HDMI output for direct digital display 2 MP resolution, 1920 x 1080 Full HD 60 fps progressive scan for smooth live view Includes 32 GB SD card and C‑Mount adapter Faster inspection with direct Full HD output The HDMI interface and native 1920 x 1080 output reduce setup complexity by enabling immediate display on standard monitors, which streamlines documentation and speeds decision-making in quality control. A 2 MP sensor delivers sufficient detail for routine inspection tasks while keeping file sizes manageable, so capture workflows remain efficient without an elaborate imaging chain. The compact design and C‑Mount adaptability support integration with a wide range of optical heads and trinocular microscopes used in workshop and lab environments. Consistent image quality from a sensitive sensor A Sony CMOS 1/2.8" sensor with pixel size 2.9 x 2.9 µm and a sensitivity of 1300 mV/lux‑sec produces reliable images even at modest illumination levels, reducing the need for intense lighting during delicate inspections. The 12 bits colour depth and progressive scan mode preserve tonal gradation and avoid artefacts in moving subjects, while the 60 fps capability (mode-dependent) supports smooth live viewing for alignment and real‑time evaluation. These traits make the camera suitable for documentation, basic measurement tasks and instructional capture. Ready for immediate use and flexible storage options Delivery includes a 32 GB SD card, C‑Mount 0.37x adapter and adapter rings (30.0 and 30.5 mm to 23.2 mm), together with a calibration slide (10 mm/100), enabling quick setup and reliable scale reference for metrological tasks. Onboard SD storage supports expansion to 128 GB, allowing longer recording or larger image datasets without interruption. Power flexibility (100–240 Vac to 12 Vdc/1 A) and both HDMI and USB connectivity simplify integration into existing inspection benches and documentation stations. Robust operation in typical lab and workshop conditions Designed for stable performance in varied environments, the imaging module operates across a wide temperature range (-10–50°C) and 30–80% relative humidity, making it suitable for both controlled laboratory settings and less forgiving workshop areas. A measured noise level of 42 dB ensures unobtrusive operation during extended use. Progressive scanning and digital output provide dependable frame delivery for measurement work, while the compact mechanical dimensions (Ø51 x 60 mm) permit installation where space is limited. Discuss integration, accessory options and shipping with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and fast supply from our European stock Technical Data SKU: VC.3023 Manufacturer: Euromex Model series: HD‑Mini Product type: Microscope camera Digital output: HDMI Connection: HDMI Core specifications Resolution: 2 MP / 1920 x 1080 Sensor: Sony CMOS 1/2.8" Frame rate: 60 fps (Live view, mode-dependent) Pixel size: 2.9 x 2.9 µm Sensitivity: 1300 mV/lux‑sec Colour depth: 12 bits Format: 1/2.8" HDTV 1080p Noise level: 42 dB Operating temperature: -10–50°C Humidity: 30–80% Power supply: 100–240 Vac to 12Vdc/1A Features & accessories Progressive scan Storage: SD 32 GB included, up to 128 GB Included adapters: 30.0 and 30.5 mm to 23.2 mm Calibration slide 10 mm/100 C‑Mount adapter 0.37x Interface: HDMI and USB FAQ What microscopes is the camera compatible with? The HD‑Mini VC.3023 fits microscopes that accept C‑Mount connections; included adapter rings enable use with common trinocular and inspection heads. Is live video smooth enough for alignment tasks? Yes, the progressive scan sensor and 60 fps capability ensure smooth live viewing suitable for alignment and assembly inspection with the VC.3023. Can recordings be stored directly on the device? Recording to the included 32 GB SD card is supported; the camera accepts SD cards up to 128 GB for extended capture. How does the sensor perform under low light? The Sony CMOS 1/2.8" sensor with 2.9 x 2.9 µm pixels and sensitivity of 1300 mV/lux‑sec provides good performance at moderate illumination, reducing dependence on strong lighting. Is a calibration reference supplied for measurements? A calibration slide (10 mm/100) is included with the VC.3023 to facilitate scale verification and basic metrological checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining precise quarter-wave retardation with a quick-action slider, this accessory delivers reliable polarisation control for transmitted-light microscopy, ideal for contrast enhancement and workflow efficiency. Order the Euromex IS.9612 directly via Metav Werkzeuge or request advice from our consultants. λ/4 Plate in Slider for Transmitted-Light Illumination — iScope Polarisation Accessory (Euromex IS.9612) The λ/4 plate in slider for transmitted-light illumination for iScope polarisation models IS.9612 is an optical accessory enabling controlled retardation for polarisation contrast in transmitted-light microscopy. Quarter-wave retardation plate for polarisation contrast Compact slider mount for rapid insertion and removal Compatible with iScope polarisation series Designed to improve transmitted-light imaging consistency Enhanced contrast and controlled retardation for clearer imaging The accessory uses a quarter-wave plate (λ/4) to transform linear into circular polarisation or to introduce a defined phase shift between orthogonal polarisation components. This retardation reduces interference effects and improves visibility of birefringent structures in transmitted-light applications. For laboratory technicians and quality-control staff, the technical advantage is straightforward: better contrast with minimal modifications to the optical path. The slider design allows the optical element to be introduced without dismounting condenser assemblies, preserving alignment and saving time during routine inspections. Workflow advantage from the slider mechanism Fitting the plate in a slider mount provides immediate operational benefits: the element can be engaged or removed in seconds, which supports rapid switching between polarised and non-polarised transmitted-light modes. In production or classroom environments where throughput matters, this accessory reduces downtime and simplifies sample handling. The compact form factor integrates with iScope polarisation units and maintains a consistent optical position, so measurement reproducibility and imaging consistency are supported without complex recalibration. Built for dependable optical performance in microscopy tasks Manufactured to support polarisation contrast methods, the component contributes to repeatable imaging results across microscopy workflows. Its role in transmitted-light polarisation enhances the detection of stress patterns, crystalline structures and fine textural detail in materials and biological specimens. The accessory is therefore suited to research laboratories, industrial inspection benches and educational settings seeking improved visual differentiation of anisotropic features. For further specification details or to verify compatibility with a specific iScope variant, technical consultation is available. Secure the Euromex IS.9612 via Metav Werkzeuge for precise polarisation control and seamless integration into iScope setups; contact Metav Werkzeuge for tailored specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9612 SKU: IS.9612 Brand: Euromex Product type: Microscope illumination accessory Facts File size: 37693 Gallery filename: IS.9612.jpg Category path: Microscopy accessories › Contrast methods › Polarisation Special features Quarter-wave plate (λ/4) in slider for transmitted-light illumination Designed for iScope polarisation models Application: polarisation contrast in transmitted-light microscopy FAQ What is the primary function of the λ/4 plate in this accessory? The λ/4 plate in the Euromex IS.9612 introduces a defined phase retardation to enhance polarisation contrast in transmitted-light microscopy, improving visibility of birefringent details. Which microscope series is this slider designed for? The slider is designed for iScope polarisation models and fits the corresponding transmitted-light illumination path of that series. Can the plate be inserted and removed without realigning the microscope? Yes, the slider mount allows rapid insertion and removal with minimal disturbance to the optical alignment, supporting consistent imaging across sessions. What types of samples benefit most from using this polarisation accessory? Samples exhibiting birefringence—such as crystalline materials, polymers, or stressed transparent components—benefit substantially, as do biological specimens where polarisation reveals structural detail. Is additional calibration required after introducing the plate? Basic checks are recommended, but the slider is designed to maintain optical positioning so extensive recalibration is usually unnecessary. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise polarisation control and space-saving integration to enhance reflected-light inspections; the compact slider design ensures quick insertion and repeatable positioning while maintaining optical performance. Order the accessory directly via Metav Werkzeuge or ask our consultants for application advice. Quarter-wave plate slider for reflected-light polarisation — Euromex IS.9612-R The Quarter-wave plate slider IS.9612-R is a precision accessory for polarisation microscopy, designed to introduce adjustable retardation in reflected-light illumination for iScope polarisation models. Quarter-wave plate in slider format For reflected-light illumination Compatible with iScope polarisation models Manufacturer: Euromex, SKU IS.9612-R Improved contrast and polarisation control for reflected-light work A quarter-wave plate (λ/4 plate) is an optical retarder that shifts the phase between orthogonal polarisation components; this converts linearly polarised light into circular polarisation or adjusts the ellipticity of the beam. In reflected-light microscopy, that phase shift can be used to enhance contrast and reveal surface stress or birefringence effects that would otherwise remain hidden. The slider-mounted design permits quick changeover and consistent optical alignment, ensuring that the retardation effect is reproducible from one specimen to the next. Slider format that speeds up routine inspection The slider mechanism integrates the retarder element into standard filter housings or illumination carriers used in polarisation setups, enabling immediate insertion and removal without additional tools. This format supports efficient workflows in production control and research labs where time and repeatability matter. By combining compact physical integration with stable optical positioning, the slider reduces handling time and minimises the chance of misalignment, delivering repeatable positioning and improved throughput during microscope-based inspections. Designed for iScope polarisation systems and reflected-light applications This accessory has been developed for compatibility with iScope polarisation models, matching the mechanical and optical interfaces commonly used in those systems. The element is intended specifically for reflected-light illumination, so it is best suited to surface analysis, metallography and materials inspection tasks where polarisation effects on reflected beams are exploited. The manufactured build and optical finish support consistent results in routine laboratory and quality-assurance environments. Practical benefits for laboratories and technical inspection Choosing a dedicated quarter-wave slider enables targeted enhancement of imaging contrast with minimal modification to existing equipment. Laboratories benefit from a compact, purpose-built optical element that fits into established polarising workflows, offering a clear technical upgrade without the need for extensive reconfiguration. For teams assessing surface features, stress patterns or anisotropic coatings, the component provides a reliable method to make those characteristics more visible under polarisation conditions. For precise polarisation upgrades, order the Euromex quarter-wave plate slider via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fit and application details. Technical Data Manufacturer article number: IS.9612-R SKU: IS.9612-R Manufacturer: Euromex Product type: microscope illumination Facts No detailed numerical specifications provided Special features Quarter-wave plate in slider for reflected-light illumination Compatible with iScope polarisation models Category path: Polarisation (microscopy accessory) Image: IS.9612-R.jpg — https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1d/a5/f1/6a/6af1a51dd8ecf2f60acae091/IS.9612-R.jpg FAQ What does a quarter-wave plate do in reflected-light microscopy? A quarter-wave plate introduces a phase shift between orthogonal polarisation components; in reflected-light applications the IS.9612-R from Euromex alters polarisation states to enhance contrast and reveal birefringent or stress-related features on surfaces. Is this slider compatible with iScope polarisation models? Yes — the slider is designed for use with iScope polarisation models and fits common reflected-light filter housings used in those systems. Can the quarter-wave slider be used for transmitted-light polarisation? The IS.9612-R is specified for reflected-light illumination; for transmitted-light polarisation applications, check the system requirements and seek a retarder specified for transmitted-light use. How does the slider format benefit routine inspections? The slider format enables rapid insertion and removal with stable optical alignment, delivering repeatable positioning and reduced handling time during inspection processes. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com