Take advantage of precise 30 x 40 mm travel and a mechanical X‑Y control to speed up specimen alignment in polarised‑light work; order the accessory directly via Metav Werkzeuge or contact the consultancy team for application advice. Optional mechanical X‑Y stage 30 x 40 mm for iScope polarisation microscopes (IS.9522) by Euromex An optional mechanical X‑Y stage 30 x 40 mm for precise specimen positioning on iScope polarisation microscopesis designed to improve repeatability and workflow in polarised‑light investigations. Mechanical X‑Y travel 30 x 40 mm Designed for iScope polarisation microscopes Fine mechanical positioning control Compact footprint for crowded benches Faster, more reliable positioning for polarised‑light analysis A compact mechanical X‑Y stage with a 30 x 40 mm travel range enables measured lateral movement of specimens under the microscope, reducing time lost to re‑locating regions of interest. The mechanical control system offers fine adjustment, which is particularly helpful when comparing successive views or when rotating specimens for polarisation contrast. This benefit translates into fewer interruptions during sample examination and a smoother workflow in routine laboratory or educational settings. Simple integration with iScope polarisation microscopes The accessory is tailored for installation on the iScope series, ensuring straightforward integration into existing polarised‑light setups. Its mechanical design keeps the stage operation intuitive and maintenance minimal, while the compact size preserves valuable bench space. Because the unit is optional and modular, laboratories can upgrade an existing instrument for enhanced positional control without replacing the main microscope body. Practical benefit for testing and documentation Repeatable lateral adjustment supports comparable imaging and systematic documentation of polarised specimens, aiding quality control and research reproducibility. The stage assists in aligning samples precisely for photomicrography or measurement tasks and reduces the risk of missing critical microstructures during inspection. For users uncertain about compatibility or application suitability, Metav Werkzeuge provides further technical clarification and specifications. Contact Metav Werkzeuge for compatibility advice and to request the Euromex IS.9522 X‑Y stage for iScope polarisation microscopes Technical data Article number: IS.9522 SKU: IS.9522 Brand: Euromex Product type: Microscope stage Label: Optionaler mechanischer X‑Y‑Tisch 30 x 40 mm für Polarisationsmikroskope iScope IS.9522 Facts Travel range: 30 x 40 mm Special features Optional mechanical X‑Y stage Compatibility with iScope polarisation microscopes Mechanical positioning control for precise specimen alignment FAQ What is the lateral travel range of the stage? The lateral travel range is 30 x 40 mm, specified for the Euromex IS.9522 mechanical X‑Y stage used with iScope polarisation microscopes. Can the stage be retrofitted to an existing iScope microscope? Yes, the IS.9522 is an optional accessory explicitly intended for integration with iScope polarisation microscopes, allowing retrofitting where the instrument mount is compatible. How does the mechanical control improve imaging work? Mechanical fine adjustment on this stage enables repeatable specimen positioning, which assists in comparative imaging, photomicrography and systematic inspection using polarised light. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise phase-contrast alignment and a 30 mm tube interface for reliable optical centring; benefit from the compact integration of the Delphi‑X Observer series. Order the phase-centred alignment telescope directly via Metav Werkzeuge or consult our specialists for fitment advice. Phase-centred telescope Delphi‑X Observer DX.9148 — alignment telescope for phase contrast, 30 mm tube (Euromex) The Phase-centred telescope Delphi‑X Observer DX.9148 is an alignment instrument for phase contrast microscopy, designed to assist optical centring tasks through a standard 30 mm tube interface. Alignment telescope for phase-contrast optics 30 mm tube diameter for standard objective ports Delphi‑X Observer series, SKU DX.9148 Achieve reliable phase-contrast alignment fast The primary function of this alignment telescope is to simplify and speed up the optical centring process for phase contrast systems. By providing a clear visual reference, the instrument enables correct positioning of the phase ring relative to the condenser and objective, reducing trial-and-error adjustments. For laboratories and teaching facilities this means fewer interruptions during setup and consistent image quality across sessions. The optical aid reduces alignment time and supports reproducible imaging conditions, which is particularly valuable when multiple objectives or condensers are in use. Seamless integration with 30 mm tube fittings Designed around a 30 mm tube interface, the device fits standard microscope ports used in many phase-contrast configurations. The use of a common tube diameter ensures straightforward mechanical compatibility, allowing the telescope to be inserted without modification into compatible nosepieces or adaptor tubes. This compatibility simplifies workflows in multi-user environments and workshop settings, where rapid swapping of accessories is routine. The uniform mounting also helps preserve instrument alignment during handling and storage. Why precise centring improves diagnostic and research outcomes Correct alignment of the phase components ensures that contrast enhancement is applied where intended rather than introducing artefacts or uneven illumination. The optical centring aid assists in aligning the phase ring concentrically with the objective’s phase plate, which stabilises image contrast and enhances the visibility of transparent specimens. In practical terms, this can result in clearer observation of cellular detail, improved measurement reliability and fewer re-imaging cycles, translating into higher laboratory throughput and greater confidence in results. Designed for routine use within the Delphi‑X Observer family As part of the Delphi‑X Observer series, this alignment accessory complements existing observation equipment and supports predictable integration into established microscope setups. The association with a recognised series underlines consistent design language and accessory interchangeability. For procurement and inventory management, the clear series association and SKU DX.9148 facilitate ordering and stock control, reducing administrative overhead for procurement teams and workshop managers. Contact Metav Werkzeuge for procurement and technical consultation regarding the Euromex Delphi‑X Observer DX.9148 phase-centred alignment telescope—assistance available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9148 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Phase-centred telescope Facts Tube diameter: 30 mm Features & compatibility Application: alignment for phase contrast Tube mount: Ø 30 mm Series: Delphi‑X Observer SKU: DX.9148 FAQ What is the primary use of this alignment telescope? The alignment telescope supports optical centring for phase contrast systems; the Delphi‑X Observer DX.9148 provides a visual reference to align the phase ring with the objective. Which tube diameter does the device require? The instrument is designed for a 30 mm tube interface and is intended to be compatible with microscope fittings that accept a 30 mm tube. Is the telescope part of an accessory series? Yes, the device belongs to the Delphi‑X Observer series and is identified by SKU DX.9148 for inventory and ordering. Can the alignment telescope improve image consistency? Correct use of the alignment aid reduces misalignment-related artefacts and helps maintain consistent phase-contrast performance across sessions. Is specialised training required to use the instrument? Basic familiarity with phase contrast components is sufficient; the alignment telescope is intended to streamline the centring procedure for routine laboratory use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The phase‑centred telescope combines precise optical alignment with a standard Ø 30 mm tube, ensuring fast and reliable phase‑contrast setup; order the IS.9148 through Metav Werkzeuge or ask the consultants for compatibility details. Euromex phase‑centred telescope IS.9148 – Ø 30 mm tube for phase‑contrast systems The phase‑centred telescope IS.9148 is a compact accessory for accurately centring phase components in phase‑contrast microscopy, designed for integration with standard 30 mm tube systems. Phase alignment for phase‑contrast microscopy Ø 30 mm optical tube for standard eyepiece ports Compact design for easy integration Euromex quality and industrial reliability Faster, repeatable phase alignment for routine work The phase‑centred telescope is designed to make optical alignment straightforward and repeatable, reducing downtime during microscope setup. By centring the phase annulus relative to the objective, the accessory streamlines the adjustment process for phase‑contrast techniques, so laboratories and workshops can maintain consistent image quality without prolonged calibration. The clear, mechanical reference provided by the device supports efficient workflow and lowers the risk of misalignment during sample preparation. Compatibility and simple integration into existing systems Featuring a Ø 30 mm tube, this telescope matches common eyepiece and accessory ports, enabling seamless installation into many phase‑contrast configurations. The compact form factor permits placement without obstructing other condenser or illumination adjustments, which simplifies retrofitting on an existing bench or microscope stand. Technical compatibility is determined by tube diameter and optical path—Metav Werkzeuge can advise on fitment and any adapter options required for specific makes and models. Proven supply chain and expert support for dependable use Sourcing through an experienced partner ensures availability and after‑sales guidance: Metav Werkzeuge operates as a precision partner, offering fast, transparent order processing and a broad product range that supports long‑term procurement. With a track record of trusted supply and extensive product selection, the partnership reduces procurement complexity and safeguards workshop continuity. For technical questions or to check system compatibility, Metav’s consultants provide targeted advice based on the telescope’s function and intended application. Contact Metav Werkzeuge for compatibility advice and to secure the Euromex IS.9148 phase‑centred telescope from the Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9148 Brand: Euromex Product type: Phase‑centred telescope SKU: IS.9148 Numbers / Core technical data Tube diameter: Ø 30 mm Special features Phase‑centred design for phase‑contrast microscopy Fits 30 mm tube eyepiece ports Category: Phase contrast accessory FAQ What is the primary purpose of this accessory? The phase‑centred telescope IS.9148 is used to centre the phase annulus relative to the objective for phase‑contrast microscopy, improving image consistency. What tube size does the telescope require? The phase‑centred telescope IS.9148 is specified for a Ø 30 mm tube, matching standard 30 mm accessory ports. Will the IS.9148 fit microscopes from different manufacturers? Compatibility depends on the presence of a 30 mm tube port and the microscope’s condenser layout; the phase‑centred telescope IS.9148 typically integrates with systems designed for phase‑contrast accessories. Can the telescope be used for alignment on non‑phase contrast systems? While intended for phase‑contrast alignment, the phase‑centred telescope IS.9148 can assist in general optical centring tasks where a 30 mm tube interface and similar alignment procedure are applicable. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of precise polarisation performance, a compact 32 mm diameter and simple installation into standard filter holders provides reliable contrast enhancement for polarised-light microscopy. Order the component directly via Metav Werkzeuge or consult the sales team for compatibility checks. Polarisation filter BioBlue.Lab BB.9732 — 32 mm polarisation element by Euromex The Polarisation filter BioBlue.Lab BB.9732 is a compact polarisation element for microscopes, intended to improve contrast in polarised-light applications and to be mounted in standard filter holders. 32 mm diameter filter element Compatible with standard filter holders Enhances contrast for polarised microscopy Consistent contrast improvement for polarised microscopy The polarisation filter delivers a clear enhancement of image contrast by selectively transmitting polarised light; this effect supports colour separation and detail recognition in polarised-light techniques. Designed within the BioBlue.Lab series by Euromex, the component is specified as a 32 mm element, which allows integration into common filter carriers used in laboratory and teaching microscopes. The optical function is straightforward: by introducing a polarising element into the illumination or observation path, unwanted glare and isotropic components are reduced, so anisotropic structures become more apparent. This makes the filter valuable for routine laboratory tasks where improved material contrast aids inspection and documentation. Simple integration with existing filter systems Compatibility is a practical advantage: the element is specified to fit in a standard filter holder, permitting retrofitting without changes to the microscope’s optical train. The measured 32 mm diameter corresponds with many commercial filter wheels and slider carriers; this dimension provides a predictable mechanical fit and straightforward replacement workflows in workshop or classroom environments. Installation requires only insertion into the appropriate holder rather than optical realignment, which reduces downtime and keeps instrument maintenance minimal. The mechanical compatibility supports efficient workflows in settings where multiple contrast methods are used in short succession. Reliable optical fidelity for everyday laboratory use Optical reliability and consistent handling are core benefits for users who require repeatable results. As part of the BioBlue.Lab product line, the filter is produced to meet general laboratory expectations for microscopy accessories and to integrate with standard teaching and research microscopes. The design emphasises ease of use and predictable optical behaviour, making it suitable for quality control, materials inspection and educational polarisation demonstrations. For complex or specialised optical requirements, confirmation of holder type and mechanical clearance is recommended to ensure full compatibility with the intended microscope system. Contact Metav Werkzeuge to confirm compatibility with existing filter holders and to arrange supply of the Euromex BioBlue.Lab BB.9732 polarisation filter through Metav’s distribution network Technical Data Article number: BB.9732 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Polarisation filter Source: Education PDF-S. 16; Life Science PDF-S. 12 Facts Diameter: 32 mm Special features Fits in filter holder Polarisation element for polarised-light microscopy Label: Polarisationsfilter BioBlue.Lab BB.9732 FAQ What is the diameter of the polarisation element? The polarisation element has a diameter of 32 mm and is identified as BB.9732. Will this filter fit my microscope’s filter holder? The filter is specified to fit in a standard filter holder; the BioBlue.Lab BB.9732 element is designed for insertion into compatible filter carriers that accept 32 mm elements. Which applications are this element intended for? The component is a polarisation filter intended for use in polarised-light microscopy, supporting contrast enhancement and material inspection. How is the product identified in stock and documentation? The item is listed under SKU BB.9732 and belongs to the BioBlue.Lab series by Euromex. Is this element part of a recognised product line? Yes, the element is part of the BioBlue.Lab series and is supplied under the Euromex brand as a polarisation accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise contrast control and full 360° rotation combined with straightforward compatibility for DZ-series objectives to improve polarisation workflows and reduce rework. Order the Euromex polariser directly via Metav Werkzeuge or ask the consultants for application advice. DZ.9045 360° Rotatable Polariser for DZ-series Microscope Objectives by Euromex DZ.9045 offers a 360° rotatable polariser engineered to enhance contrast in polarisation microscopy for users of DZ-series objectives. 360° rotation for precise polarisation control Designed for DZ-series microscope objectives Enhances contrast for polarisation techniques Compact mount for simple optical integration Precise contrast control through continuous rotation A continuously adjustable 360° rotatable element enables fine-tuning of polarisation and therefore direct control of contrast in transmitted-light and reflected-light polarisation techniques. By rotating the polariser, the analyser interaction is varied incrementally, which adjusts extinction and maximises feature visibility without changing illumination or objective settings. This technical adjustability translates into measurable gains in inspection repeatability and quicker set-up times for polarisation tasks. Seamless compatibility and minimal disruption to the optical path Engineered for use with DZ-series objectives, the unit integrates into existing optical trains with minimal alignment effort. The compact design preserves the original optical path and working distance of the objective, avoiding the need for re‑calibration of focus or stage positions after installation. Compatibility with the DZ family reduces spare-part complexity and supports a streamlined inventory strategy for laboratories and workshops that use multiple DZ-series optics. Practical benefits for laboratory and inspection workflows Built to support routine polarisation workflows, the device reduces subjective interpretation by providing reproducible polarisation settings that can be recorded and replicated. For quality control and educational environments, the polariser helps to standardise imaging conditions and to accelerate decision-making. If further technical data or compatibility checks are required, Metav Werkzeuge can provide detailed assistance via email or telephone to ensure the accessory meets the intended application. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ.9045 polariser into existing microscopy setups and to request ordering information via Metav Werkzeuge GmbH, the European supply partner. Technical Data Article number: DZ.9045 SKU: DZ.9045 Product type: Microscope objective accessory Brand: Euromex Category path: Microscopy accessories / Contrast methods / Polarisation Facts Rotation: 360° rotatable Compatible with: DZ-series objectives Special features Application: Polarisation techniques 360° adjustable polariser Compact, low‑profile mount FAQ How does the 360° rotation affect image contrast? The DZ.9045 polariser adjusts the interaction between polariser and analyser across a full 360°, enabling controlled contrast changes for clearer observation of anisotropic structures. Is the polariser compatible with all DZ-series objectives? Compatibility is intended for DZ-series objectives; the DZ.9045 polariser is designed to match mechanical and optical interfaces typical of the DZ family. Can the polariser be left in place during routine objective changes? Yes, the compact design permits it to remain in the optical path during objective swaps without significant impact on working distance or alignment when used with DZ-series optics. Does the polariser require special calibration or maintenance? No specialised calibration is necessary beyond standard optical alignment; periodic cleaning of the optical surfaces is recommended to maintain optimal contrast performance. What improvements can be expected in inspection workflows? Using the DZ.9045 from Euromex typically reduces adjustment time and increases reproducibility of polarisation settings, which supports faster and more reliable inspection outcomes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Product data incomplete or inconsistent: the manufacturer "Euromex" is not listed in the approved manufacturer directory, which means that the necessary verification process cannot be completed, and as a result, it is not possible to generate the product description accurately or ensure compliance with the required standards for inclusion in the system, potentially leading to further delays or complications in processing or approving the product for distribution or sale, as the absence of the manufacturer from the directory raises questions about the authenticity, reliability, or legitimacy of the product, making it essential to address this issue promptly to avoid further disruptions.

Data error: Manufacturer "Euromex" is not listed in the approved manufacturer directory, so a compliant product description cannot be generated; this issue may arise if the manufacturer has not completed the necessary registration process or if their details have not been updated in the directory, which is essential for ensuring compliance with industry standards and regulatory requirements, and it is recommended to verify the manufacturer's status or contact the relevant authority to resolve the discrepancy and enable the creation of an accurate and compliant product description that meets all necessary guidelines and expectations.

Take advantage of the 360° rotatable polariser for precise contrast control and the straightforward compatibility with DZ-series stands to improve polarisation workflows; order directly via Metav Werkzeuge or contact our consultants for installation guidance. Polariser 360° rotatable for DZ-series stand DZ.9047 — Rotating polarisation filter by Euromex The Polariser 360° rotatable for DZ-series stand DZ.9047 is a rotating polarisation filter designed for use with DZ-series microscope stands to enable controlled contrast adjustment in polarisation-enhanced inspections. *360° rotation for full orientation control *Designed for DZ‑series microscope stands *Improves polarisation contrast and visual clarity Better contrast with controlled polarisation A precisely rotating polariser delivers repeatable, adjustable polarisation that enhances material contrast and reveals structural detail otherwise invisible under standard illumination. The supplied rotating element provides 360° rotation, enabling fine tuning of the polarisation direction to match sample requirements. This adjustment reduces glare and emphasises anisotropic features, so inspections become more reliable and measurement decisions are based on clearer visual evidence. The rotating polariser is a simple, mechanical addition that transforms illumination behaviour without altering the optical path length. Smooth integration with DZ-series stands for efficient workflows Compatibility with the DZ-series stand family ensures straightforward fitting and alignment. The rotatable unit mounts directly to the designated holder on DZ stands, maintaining the mechanical stability expected in routine microscopy tasks. Installation and rotation are mechanical, avoiding the need for electronics or recalibration of the optical train, which keeps downtime to a minimum. This arrangement supports efficient workflows and allows teams to switch between polarised and unpolarised observation quickly, preserving throughput in busy inspection or teaching environments. Practical benefits for workshop and laboratory use The compact rotating polariser is engineered for practical, day-to-day use in laboratories and workshops where repeatable viewing conditions are essential. By enabling targeted polarisation control, the accessory helps highlight strain patterns, birefringence and surface textures across a range of materials. The design supports frequent operation and straightforward handling, making it well suited for routine quality checks and comparative examinations. When integrated into standard microscope setups, the polariser helps standardise visual assessment procedures and supports clearer documentation of findings. For precise polarisation control with DZ stands, contact Metav Werkzeuge to arrange supply or technical advice — Metav Werkzeuge can advise on compatibility and delivery to your workshop via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.9047 SKU: DZ.9047 Brand: Euromex Product type: Polarisation filter Facts Rotation: 360° Compatible with: DZ-series stands Special features Rotatable polariser for DZ-series microscope stands Image file: DZ.9047.jpg FAQ How does the rotating polariser improve contrast? The rotating polariser alters the orientation of polarised light, and the Polariser 360° rotatable for DZ-series stand DZ.9047 makes it possible to fine tune that orientation to reveal birefringent structures and reduce glare. Is this polariser compatible with all DZ-series stands? The accessory is specified for DZ‑series stands and is intended to integrate mechanically with those models; compatibility is stated as part of the product description for the DZ.9047 unit. Can the polariser be used for material inspections in workshops? Yes, the rotatable polariser is suitable for workshop and laboratory inspections where polarisation highlights internal stresses, fibres or surface features. Does the unit require electronic control or calibration? No, the rotation mechanism is mechanical and does not require electronic control; this preserves the existing optical alignment and minimises calibration needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise 360° rotation and a quick-fit slider mount for faster contrast adjustment and uninterrupted workflow; order the accessory directly via Metav Werkzeuge or consult the team for compatibility advice. Euromex iScope IS.9608 — 360° rotatable polariser in a slider for transmitted illumination The iScope IS.9608 is a 360° rotatable polariser mounted in a slider, engineered to provide adjustable transmitted-light polarisation for iScope polarisation models. 360° rotation for adjustable contrast Slider mount for quick insertion Designed for transmitted illumination polarisation Precise contrast control for clearer analysis The 360° rotatable polariser enables fine-tuning of polarisation angle to optimise contrast in transmitted-light inspections. By rotating the element a full circle, the observer can isolate birefringent structures or reduce glare, which improves visual differentiation of features in transparent or semi-transparent specimens. The continuous rotation eliminates incremental steps and allows for smooth adjustments, making it straightforward to arrive at the exact optical condition required for measurement or documentation. This results in more reliable visual assessment and fewer repeat examinations, supporting a productive laboratory routine. Seamless integration with polarisation setups Designed specifically for iScope polarisation systems, the slider-mounted polariser fits into the transmitted-light path without time-consuming reconfiguration. The slider format permits rapid insertion and removal, so switching between polarised and non-polarised views is efficient. This reduces downtime during sample preparation and inspection cycles and supports a logical workflow in both teaching and industrial inspection contexts. The accessory’s compatibility with iScope polarisation models ensures mechanical and optical alignment is retained, simplifying setup and reducing the need for trial-and-error adjustments. Practical benefits for daily microscopy tasks The slider design delivers a pragmatic advantage in busy work environments: polarisation can be engaged only when required, then stowed quickly to continue with other contrast methods. This flexibility contributes to faster decision-making and a more ergonomic operating procedure for technicians. Because the component is an accessory tailored to transmitted illumination, it supports targeted use cases such as thin-section analysis, quality control of transparent materials, and polarisation-based contrast enhancement in routine inspections. Understanding polarisation and its impact on results Polarisation controls the orientation of light waves; when combined with crossed analysers or compensators, it highlights anisotropic properties in a sample. Using a rotatable polariser in transmitted-light setups makes it possible to visually emphasise stress patterns, crystal structure, or layered compositions that would otherwise be hard to detect. For users less familiar with polarisation, rotating the polariser while observing the image is the simplest method to learn how optical responses change; the visual feedback is immediate and intuitive, accelerating competence and reducing reliance on external analysis. Contact Metav Werkzeuge for tailored advice on fitting the Euromex iScope IS.9608 to existing microscopes and to arrange supply; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: IS.9608 SKU: IS.9608 Brand: Euromex Product type: microscope filter Application: transmitted illumination polarisation Facts Rotation: 360° Mount: slider Special features Slider-mounted polariser For iScope polarisation models Intended for transmitted-light contrast enhancement FAQ Is the polariser compatible with all iScope polarisation models? The Euromex IS.9608 is designed for iScope polarisation models; compatibility should be checked against the specific iScope series and its slider mount dimensions. How does the 360° rotation improve image interpretation? Full rotation lets the observer adjust the polarisation angle continuously until birefringent features or stress patterns reach optimum visibility, improving clarity and reducing repeat inspections. Can the polariser be inserted or removed during a session without disturbing alignment? The slider format allows quick insertion and removal, enabling seamless transitions between polarised and non-polarised views while maintaining optical alignment. Is this accessory suitable only for specialist laboratories? The slider-mounted polariser supports both routine inspections and advanced analyses, making it suitable for industrial inspection, teaching, and research environments where transmitted-light polarisation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from 360° rotation and an integrated polarisation filter for precise sample orientation and enhanced contrast in polarised-light routines; compact form factor allows straightforward integration into existing microscopy workflows. Order the Euromex SB.9524 via Metav Werkzeuge or consult our team for application-specific guidance. SB.9524 — 360° rotatable round polarisation specimen stage by Euromex with built-in polarisation filter The SB.9524 is a round specimen stage for microscopes offering full 360° rotation and an integrated polarisation filter, designed for polarisation contrast techniques in laboratory and educational environments. 360° rotatable round specimen stage Built-in polarisation filter for contrast Suitable for polarisation microscopy setups Improved sample orientation for reliable imaging results The combination of 360° rotation and a circular platform provides precise angular control, allowing repeatable adjustment of birefringent specimens without repositioning the microscope or the sample carrier. This design supports precision alignment during polarised-light examinations, reducing setup time and minimising handling errors. The integrated polarisation element ensures consistent optical conditions across rotations, which translates into reproducible contrast and clearer observation of structural features. Clear polarisation contrast without extra accessories An integrated built-in polarisation filter eliminates the need for separate external polarising components, simplifying the polarised-light configuration of a microscope. For users less familiar with polarisation microscopy: the filter selectively transmits light oscillating in a specific plane, thereby enhancing visibility of anisotropic materials under polarised light. This specimen stage supports standard polarisation contrast techniques and is particularly effective for mineralogy, materials science and teaching applications where reliable contrast is essential. Seamless integration into existing microscopy workflows The compact, round design facilitates straightforward mounting on a broad range of microscope stages and helps maintain an uncluttered workspace. By enabling smooth rotational adjustment, the stage improves observational efficiency—fewer interruptions for manual sample reorientation and faster progression through inspection routines. For further technical details or to verify compatibility with a specific microscope model, Metav Werkzeuge offers direct assistance by e‑mail or phone. Secure polarisation-capable handling with the Euromex SB.9524 — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical Data Article number: SB.9524 Manufacturer: Euromex SKU: SB.9524 Product type: Microscope polarisation stage Facts Rotation: 360° Shape: round Special features Built-in polarisation filter Suitable for polarisation microscopy FAQ What microscopes is the specimen stage compatible with? The specimen stage is compatible with standard microscope platforms used for polarisation contrast; the SB.9524 is designed for straightforward mounting on typical stage interfaces. How does the built-in polarisation filter improve imaging? An integrated polarisation filter in the SB.9524 provides consistent polarised-light conditions, enhancing contrast of anisotropic materials without the need for separate polarising accessories. Is the rotation continuous or stepped? The stage offers continuous 360° rotation to enable fine angular adjustment and repeatable orientation during polarised-light examinations. Can the platform be used for educational demonstrations? Yes, the design and integrated polarisation make the stage suitable for teaching environments where clear visualisation of polarisation effects is required. Where to get further technical information or compatibility advice? For additional technical data or to confirm compatibility with specific microscopes, contact Metav Werkzeuge by e‑mail or phone; the team can provide application-oriented guidance. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a precise blue filter with a compact 45 mm diameter yields controlled illumination and improved contrast in microscopy applications; order the blue filter IS.9700 directly via Metav Werkzeuge or consult our advisors for compatibility and stock information. Blue filter 45 mm for lamp housing IS.9700 — Euromex microscope filter, 45 mm diameter for lamp housings Blue filter 45 mm for lamp housing IS.9700 is a purpose-made accessory for microscope illumination systems, designed to be fitted into compatible lamp housings to refine light characteristics and support clearer imaging. Blue filter for microscope illumination 45 mm diameter for standard lamp housings Article number IS.9700 by Euromex Improved contrast through targeted illumination The blue filter shifts the spectral composition of the lamp output towards shorter wavelengths, which can enhance visual contrast for certain specimens and reduce dominant warm tones from halogen or LED light sources. For routine inspection and educational microscopy, this results in sharper perceived edges and more distinct colour separation without altering the optical path. The accessory is intended for integration into the lamp assembly rather than the objective or eyepiece, so the effect is applied at the illumination stage and is compatible with standard transmitted and reflected light set-ups. This approach helps to accentuate details in stained samples and surface features while maintaining a simple, passive modification to the lighting. Compact, compatible design for simple integration With a nominal diameter of 45 mm, the filter is sized to suit common lamp housings used in microscopy accessories; the compact format supports quick installation and minimal adjustment of the existing lighting unit. The product is presented as an accessory component for microscope illumination systems and is identified under IS.9700 for ordering and inventory purposes. Due to its straightforward form factor, the filter can be combined with other illumination accessories such as diffusers or polarising elements, enabling modular adaptation of the light source without extensive reconfiguration. The compact design reduces the footprint within the lamp housing while providing a consistent optical effect. Practical considerations for laboratory and workshop use The filter is supplied as a dedicated microscope accessory and listed under the Euromex range, making it suitable for quality-controlled laboratory environments and educational institutions. As a passive optical component, it requires no electrical connection and imposes no maintenance beyond occasional cleaning with appropriate, non-abrasive materials. For procurement and logistical reliability, the item is available through Metav Werkzeuge, where stock levels and delivery options can be checked; the clear article reference IS.9700 ensures correct ordering and reduces the chance of specification errors. When in doubt about compatibility with a particular lamp housing, technical advisors can verify fitment using the lamp aperture and accessory mounting details. For availability and tailored advice on the Euromex blue filter IS.9700, contact Metav Werkzeuge for stock checks and specification guidance at Metav Werkzeuge GmbH. Technical Data Article number: IS.9700 SKU: IS.9700 Manufacturer: Euromex Product type: Microscope filter Label: Blauer Filter 45mm für Lampengehäuse IS.9700 Facts Diameter: 45 mm Image file name: IS.9700.jpg Image file size: 97,751 bytes Special features Blue optical filter For lamp housing applications Microscope illumination accessory Category: Filter (Microscopy accessories) FAQ What is the primary effect of the blue filter on microscopy illumination? The blue filter IS.9700 narrows and shifts the lamp spectrum towards blue wavelengths, which enhances contrast and colour separation for many specimens when fitted into the lamp housing. Will the filter fit any microscope lamp housing? The filter is designed for a 45 mm diameter aperture; compatibility depends on the lamp housing's internal diameter and mounting method, so verify the lamp aperture before ordering IS.9700. How should the filter be cleaned and maintained? Clean the glass surface gently with a lint-free cloth and mild optical cleaner; avoid abrasive materials to preserve the filter coating and optical quality of IS.9700. Is the Euromex filter suitable for both transmitted and reflected light setups? Yes, the filter is an illumination accessory and can be used with both transmitted and reflected lighting systems, provided the lamp housing accepts a 45 mm accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise colour filtration and simple integration for consistent illumination in inspection and imaging workflows; the combination of reliable spectral control and standard 45 mm sizing ensures repeatable results — order the green filter via Metav Werkzeuge or consult the technical team for compatibility checks. Green Filter 45 mm for Lamp Housing IS.9702 — Green illumination filter, 45 mm diameter, Euromex The Green Filter 45 mm for Lamp Housing IS.9702 is a compact microscope illumination filter intended to modify light output for improved contrast and colour balance in inspection and imaging applications. Accurate colour correction for illumination Compact 45 mm diameter for standard housings Simple insertion for lamp assemblies Compatible with microscope illumination systems Consistent colour and improved contrast for reliable inspection The green filter IS.9702 shifts lamp emission toward the green spectral band to enhance spectral contrast for colour-sensitive tasks. In practice, this results in clearer differentiation of features under transmitted or reflected light, which supports faster decisions in routine inspection. The standard 45 mm diameter ensures compatibility with a wide range of lamp housings used in laboratory and workshop environments, providing a predictable optical effect without the need for additional accessories. Quick integration into existing illumination setups Designed for direct use in lamp housings, the accessory permits simple insertion and can be used in typical microscope illumination chains. Because the component is a dedicated illumination filter, it reduces the need for software post-processing by delivering a more suitable colour balance at source. The reduced setup complexity increases throughput for repetitive tasks and lowers the risk of variation between sessions, making the filter a practical choice for both educational and industrial microscopy applications. Reliable supply and experienced distribution for professional use Procurement through an established supplier provides continuity for production and lab operations. Metav Werkzeuge acts as a quality filter in the supply chain and combines practical logistics with sector expertise, supporting access to precision accessories across Europe. With an extensive portfolio and a history of servicing many workshops, Metav offers dependable availability and product information to support integration into inspection workflows, helping to maintain consistent results. For procurement guidance and availability of the IS.9702 green filter, contact Metav Werkzeuge for expert advice and compatibility checks for existing lamp housings. Technical data Article number: IS.9702 SKU: IS.9702 Product type: Microscope filter Manufacturer: Euromex Label: Grüner Filter 45mm für Lampengehäuse IS.9702 Facts Diameter: 45 mm Image file size: 92,762 bytes Image filename: IS.9702.jpg UID: IS.9702 Special features Green optical filter for lamp housing Intended for microscope illumination Compatible with 45 mm lamp holders FAQ What is the primary function of this filter? The green filter IS.9702 narrows lamp output toward the green band to increase contrast and improve visual separation of colour-dependent details during microscopy inspections. Which lamp housings is the accessory compatible with? The component is intended for lamp housings that accept a 45 mm insert; compatibility with specific assemblies depends on the housing inner diameter and mounting method. Can this filter be used with microscopes for transmitted and reflected light? Yes, the filter is suitable for both transmitted and reflected illumination where a green-dominant spectrum improves feature visibility in microscopy and visual inspection tasks. How should the filter be handled and cleaned? Handle the optical surface with care; clean using a soft, lint-free cloth and suitable optical cleaner. Avoid abrasive materials and excessive pressure on the glass surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable polarised illumination and a compact 45 mm diameter support improved contrast for birefringent samples in lamphouse setups. Thanks to simple integration with standard lamphouses and consistent optical performance, the filter assists routine microscopy and teaching applications. Order the Polarisation filter iScope IS.9600 directly via Metav Werkzeuge or ask our consultants for tailored advice. Euromex iScope IS.9600 — Polarisation filter, 45 mm for lamphouse A Polarisation filter iScope IS.9600 engineered to enhance contrast in transmitted-light lamphouse illumination for the observation of birefringent and anisotropic specimens. 45 mm diameter for lamphouse Improves contrast for birefringent samples Compatible with iScope lamphouse series Clearer contrast for polarised microscopy A dedicated polarisation filter enhances visibility of structures that alter polarised light, making features in birefringent materials stand out against the background. By introducing controlled polarisation into the illumination path, the accessory increases image contrast without changing the objective optics. The compact 45 mm size is specified for lamphouse integration, so laboratories and teaching facilities benefit from a device that focuses on improving sample contrast while keeping the microscope's optical train unchanged. Easy fitting and reliable compatibility Designed for straightforward placement in the lamphouse, the accessory avoids complex alignment procedures and supports reproducible results during routine use. The item belongs to the iScope series and matches typical lamphouse mounts, enabling quick replacement or addition to existing setups. Installation requires no specialised tooling; once in place, the polariser maintains consistent orientation relative to the condenser and analyser, which is essential for repeatable polarised-light examinations and comparative documentation. Practical handling and application guidance For everyday laboratory work the filter provides dependable optical behaviour with minimal maintenance: gentle cleaning of the glass surfaces and careful handling protect the optical element and preserve its performance. As an optical accessory it is particularly useful in mineralogy, materials science and education where polarised illumination reveals internal stresses, crystallinity and anisotropy. When planning an experiment, consider the lamphouse aperture and condenser configuration to ensure the filter delivers the intended contrast enhancement. For precise polarised imaging with Euromex optics, contact Metav Werkzeuge for supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and compatibility guidance from Emmerich. Technical data Article number: IS.9600 Manufacturer: Euromex Series: iScope Type: Polarisation filter SKU: IS.9600 Application: for lamphouse Diameter: 45 mm Facts Diameter: 45 mm Special features Polarisation accessory for transmitted-light lamphouse Enhances contrast of birefringent and anisotropic samples Category: Polarisation (microscopy accessory) FAQ What is the primary purpose of a polarisation filter? A polarisation filter modifies the illumination to reveal birefringence and anisotropic features; the Euromex Polarisation filter iScope IS.9600 is supplied for lamphouse use to improve contrast in such samples. Will the filter fit existing lamphouses? The accessory is specified as a 45 mm unit for lamphouse integration and is compatible with typical iScope lamphouse fittings, as indicated by the IS.9600 designation. How should the filter be cleaned and cared for? Clean glass surfaces with a lint-free cloth and suitable optical cleaner; the Euromex IS.9600 should be handled by the edges to avoid fingerprints and preserve optical quality. Which applications benefit most from this polariser? Mineralogy, materials analysis and teaching labs gain most from polarised illumination because the IS.9600 highlights internal stresses, crystalline orientations and other anisotropic properties. Is technical advice available for integration into a specific microscope? Technical guidance is available; Metav Werkzeuge can advise on compatibility and installation for the Euromex IS.9600 to ensure correct lamphouse and condenser alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 45 mm white diffusion element and its compatibility with standard lamp housings to achieve more consistent illumination and fewer retakes in routine microscopy. Order the filter directly via Metav Werkzeuge or consult the Metav team for compatibility details and rapid delivery. Euromex IS.9706 — White 45 mm microscope filter for lamp housings The Euromex IS.9706 is a white diffusion filter designed to produce even illumination in microscope lamp housings and similar lighting assemblies. 45 mm diameter for standard lamp housings Uniform white light diffusion Designed for straightforward installation Consistent illumination for reliable image capture A white diffusion element evens out light output from the lamp housing, reducing hotspots and reflections that can impair image quality. The 45 mm diameter matches common lamp-seat dimensions, so the result is uniform illumination across the field of view. Less variance in light distribution translates into fewer repeated captures and a steadier baseline for image analysis, which supports efficient laboratory routines and dependable documentation. Fits typical microscope lamp housings for quick integration The component is intended specifically for installation into microscope lamp assemblies and analogous housings; its nominal 45 mm size makes it suitable for many standard fittings. As a passive optical accessory, it integrates without electrical modification, offering a straightforward option for retrofitting existing lighting setups. Compatibility with conventional lamp seats simplifies stocking decisions and reduces the need for multiple, specialised spare parts. Improves visual comfort and analytical consistency By producing softer, more evenly distributed light, the white filter reduces glare and eases visual fatigue during prolonged inspections. The diffusion effect enhances contrast uniformity without altering colour balance, which is beneficial for both human observation and digital imaging workflows. This small optical addition can therefore contribute to higher throughput by lowering the incidence of rework due to uneven lighting. Simple handling with practical benefits for workshops and labs The design focuses on practicality: a compact microscope filter that is easy to store and deploy as part of routine maintenance of illumination systems. The unobtrusive white diffuser supports consistent results over repeated sessions and fits into organised spare-part inventories. For teams aiming to standardise lighting across multiple instruments, the filter offers a low-effort measure to harmonise performance between stations. For reliable, uniform illumination in microscopy applications, request the Euromex IS.9706 white filter from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast dispatch. Technical Data Article number: IS.9706 SKU: IS.9706 Manufacturer: Euromex Product type: Microscope filter Data Diameter: 45 mm Image file size: 52329 bytes Special features White diffusion filter For lamp housings Product label: Weißer Filter 45mm für Lampengehäuse IS.9706 Intended application: microscope lamp illumination FAQ What diameter does the filter have? The Euromex IS.9706 is specified with a 45 mm diameter for use in matching lamp housings. What is the intended application of this component? This component is a white diffusion microscope filter intended for use in microscope lamp housings and similar illumination assemblies. Which article number and SKU identify this product? The item is listed as IS.9706 and uses the same value for the SKU. Who manufactures the filter? The filter is produced by Euromex and sold under the designation IS.9706 as a microscope illumination accessory. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact optical solution that combines a yellow filter with a standard 45 mm diameter for consistent lamp-housing compatibility; the result is improved contrast in transmitted-light applications and straightforward integration into existing microscope illumination. Order supply or request compatibility advice via Metav Werkzeuge if required. Euromex IS.9704 yellow 45 mm microscope lamp filter — yellow filter, 45 mm diameter Euromex IS.9704 is a yellow microscope lamp filter designed to fit lamp housings and to modify illumination for clearer, higher-contrast transmitted-light observation. Yellow 45 mm diameter for lamp housings Fits standard microscope lamp holders Manufactured by Euromex optical accessories Enhanced contrast for transmitted-light inspection A dedicated yellow filter provides a simple, effective way to adjust the light spectrum reaching the specimen, improving visual differentiation of features under transmitted light. By selectively attenuating portions of the illumination, the filter increases apparent contrast for many common samples, which can reduce the need for repeated staining or complex image processing. This optical solution delivers a tangible benefit in routine inspection tasks: faster visual assessment with fewer adjustments to the microscope's illumination system. Simple compatibility and quick installation With a nominal diameter of 45 mm, the filter is sized for insertion into compatible lamp housings and holders found on many standard microscope illumination modules. The compact form factor enables a straightforward retrofit without modification of the light source, offering a practical route to upgrade existing setups. Installation and removal require no specialised tools, which helps to keep downtime low and supports continuous operation in busy labs or workshop environments. Reliable accessory for everyday microscopy workflows The filter is intended as a maintenance-friendly accessory for microscopy work where reproducible lighting conditions are important. As a passive optical component it demands minimal care: periodic cleaning of the optical surface preserves image quality and prevents stray reflections. The design supports consistent results across repeated inspections, helping to standardise visual evaluation and to enhance process reliability in quality control or educational settings. Expert supply and advice from a precision partner Metav positions itself as a partner for accessible precision: a central supplier with extensive inventory and practical expertise for laboratory and workshop customers. Benefit from a supplier that combines broad product availability with technical knowledge, supported from a logistics hub in Emmerich. For questions about fitment, compatibility with a particular illumination module, or batch supply for installation across multiple instruments, Metav Werkzeuge can provide targeted advice and procurement support. For compatibility checks or to discuss supply of the Euromex IS.9704 yellow 45 mm microscope lamp filter for specific equipment, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a tailored recommendation and delivery. Technical data Article number: IS.9704 SKU: IS.9704 Manufacturer: Euromex Product type: Microscope filter Label: Gelber Filter 45mm für Lampengehäuse IS.9704 Core specifications Diameter: 45 mm Image file size (product image): 67991 bytes Special features Yellow optical filter For lamp housings (45 mm) Category: Microscope filter Product image available: IS.9704.jpg FAQ What effect does a yellow filter have on transmitted-light microscopy? A yellow filter modifies the illumination spectrum to increase contrast in transmitted-light observations; the Euromex IS.9704 yellow filter is suitable where warmer, higher-contrast lighting improves visual differentiation of sample features. Will the IS.9704 fit my microscope lamp housing? The IS.9704 is specified with a 45 mm diameter for lamp housings; compatibility depends on the lamp-holder design, so verify the holder diameter on the instrument or consult Metav Werkzeuge for confirmation. How should the yellow filter be cleaned and maintained? Clean the optical surface with a lint-free cloth and appropriate optical cleaner; avoid abrasive materials. Regular cleaning keeps the filter performing reliably in routine microscopy workflows. Can the filter be used with LED and halogen illumination? The yellow filter is a passive optical accessory that can be used with common light sources such as LED or halogen lamps, provided the physical holder matches the 45 mm diameter requirement. Is the filter intended for professional laboratory use? Yes. The filter is designed as a practical accessory for microscopy applications where consistent illumination control and improved contrast are desirable; the Euromex IS.9704 supports standard inspection and educational uses. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 45 mm format combined with reliable yellow spectral filtration to enhance contrast in transmitted-light microscopy; order or request advice easily through Metav Werkzeuge for rapid procurement and technical support. Euromex Yellow Filter for Lamp Housing DX.9704 — 45 mm microscope filter Euromex DX.9704 is a yellow microscope filter designed for insertion into lamp housings to improve contrast and colour balance in brightfield illumination. Yellow spectral filtering for contrast enhancement 45 mm diameter for lamp housings Designed for microscope illumination systems Simple installation and routine upkeep Improve contrast with targeted spectral control A yellow filter alters the lamp spectrum by attenuating shorter wavelengths, which can reduce excessive blue light and help enhance contrast in many transparent or lightly stained specimens. This spectral adjustment supports clearer visual separation of structures without changing objective settings, enabling more consistent observation. The result is a more reliable image rendition under transmitted-light conditions, beneficial in routine inspection and quality-control workflows. Compact 45 mm format for straightforward integration The 45 mm diameter is a decisive specification for compatibility with lamp housings that accept a 45 mm aperture. The compact format simplifies replacement and keeps the illumination path stable, reducing the need for repeated adjustments. Because the component is intended specifically as a lamp housing accessory, fitting it does not require modifications to the illumination assembly; this preserves alignment and repeatability during inspection tasks. Practical benefits for everyday microscopy tasks As a microscope filter, the DX.9704 by Euromex supports improved visual clarity in applications where colour balance and contrast matter, such as routine sample checks and preparatory inspection stages. The filter’s effect is immediate and reversible: it is a non-invasive optical accessory that complements existing lighting rather than altering imaging hardware. This makes it a pragmatic choice for laboratories and workshops seeking straightforward enhancements to image quality. Simple maintenance keeps optical quality consistent Maintenance is kept deliberately simple to preserve optical performance. Regular checks for dust and fingerprints, coupled with gentle cleaning using lens tissue and an appropriate optical cleaner, will maintain transmission characteristics and prevent artefacts. The filter’s role in the illumination path means that modest care extends service life and preserves consistent spectral balance across inspections. For procurement and technical guidance on the Euromex DX.9704 yellow filter, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9704 Brand: Euromex Product type: microscope filter Data Diameter: 45 mm Special features Yellow filter for lamp housing FAQ What is the exact diameter of the filter? The Euromex DX.9704 filter has a diameter of 45 mm and is intended for lamp housings that accept this size. What does a yellow filter achieve in microscopy? A yellow filter reduces shorter wavelengths and helps to enhance contrast and colour balance in transmitted-light observation, improving visual separation of fine features. Will this filter fit my microscope lamp housing? The DX.9704 is designed for lamp housings with a 45 mm aperture; compatibility depends on the lamp housing dimensions rather than the microscope brand. How should the filter be fitted into the lamp housing? The filter is installed directly into the lamp housing aperture; it is designed as an accessory for insertion without modification to the illumination assembly. How can the filter be cleaned and stored? Clean with lens tissue and a suitable optical cleaner; store in a dust-free container when not in use to preserve transmission and prevent surface damage. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise sample positioning, robust mechanics and straightforward readout for reliable microscopy workflows; order the stage directly via Metav Werkzeuge or consult the team for application advice. Mikroskoptisch EcoBlue EC.9500 — attachable mechanical X‑Y stage, 51 × 26 mm travel (Euromex) The Mikroskoptisch EcoBlue EC.9500 is an attachable mechanical X‑Y stage designed to bring controlled lateral movement to educational and routine laboratory microscopes in a compact format Attachable mechanical X‑Y stage 51 × 26 mm translation range Double vernier with separate horizontal knobs Faster sample alignment through precise lateral control The mechanical X‑Y stage offers a compact and reliable way to position specimens with repeatable accuracy. With a 51 × 26 mm translation range, the platform allows fine lateral movements while preserving working distance, so slide navigation becomes more efficient and less time-consuming. The integrated double vernier enables readable sub-divisions for coarse and fine adjustments, which reduces repositioning time and contributes directly to improved throughput in teaching or routine inspection tasks. The clear mechanical feedback of the separate horizontal knobs supports controlled steps and prevents inadvertent overshoot, making specimen handling both faster and safer. Built for educational benches and routine laboratory use As an attachable accessory, the stage fastens to a wide range of microscope frames, transforming standard stands into more versatile inspection systems without complex retrofitting. The platform’s straightforward construction is deliberately robust, designed for repeated daily handling in classrooms, service workshops and quality-control benches. Low complexity in the mechanics translates into low maintenance requirements and predictable long-term performance, which makes this stage a practical choice where ease-of-use and uptime are priorities rather than elaborate automation. Clear readout and understandable adjustment for confident operation The twin-scale layout of the vernier provides interpretable position feedback even for users new to precision stages: one scale for the main coarse position and a second vernier for fine interpolation. This arrangement simplifies the concept of graduated movement, so teams can rely on measured shifts rather than guesswork. The readable markings combined with tactile knobs allow precise incremental steps and straightforward documentation of sample coordinates, aiding repeatable observation and straightforward handover between users. Practical benefits for workshops and teaching environments This platform is particularly attractive where a compact footprint and dependable mechanical control are required. The stage supports routine microscopy workflows by enabling controlled sample scanning and documented positioning without the need for electronic drives. Its practical design contributes to a cost-effective upgrade path for institutions and small laboratories seeking measurable gains in handling efficiency. If clarification is needed regarding compatibility or intended use, assistance is available to help match the stage to the specific microscope stand or application. Contact Metav Werkzeuge today for tailored advice and to secure this attachable stage for improved sample alignment on every microscope Technical data Article number: EC.9500 SKU: EC.9500 Model series: EcoBlue Product type: microscope stage Brand: Euromex Measurements / Performance Translation range: 51 × 26 mm Special features / Design Attachable mechanical X‑Y stage Double vernier scale Separate horizontal adjustment knobs Suitable for microscopes (education and routine laboratory use) FAQ How much lateral travel does the stage provide? The EcoBlue EC.9500 offers a translation range of 51 × 26 mm, enabling controlled lateral movement across typical specimen sizes. Is the stage compatible with different microscope stands? The attachable design is intended for common microscope frames and adapts the inspection bench to controlled X‑Y movement without complex installation. How does the double vernier support fine positioning? The double vernier gives a coarse main scale and a secondary finely graduated vernier, allowing precise interpolation for repeatable specimen placement. Is the mechanism suitable for classroom use? Yes, the robust mechanical design and clear readout make the platform well suited to educational environments and routine laboratory tasks. Can the stage be used for documentation of sample positions? The readable scales and tactile knobs enable documented and reproducible positioning, aiding routine inspection and repeated observations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise polarisation control, reliable 530 nm retardation and quick slider insertion for reproducible contrast in incident‑light applications; order the 1λ plate, first‑order red 530 nm in slider for incident‑light illumination for iScope polarising models IS.9610-R directly via Metav Werkzeuge or ask our consultants if needed. 1λ plate, first-order red 530 nm in slider for incident-light illumination for iScope polarising models (Euromex IS.9610-R) The 1λ plate, first‑order red 530 nm in slider for incident‑light illumination for iScope polarising models is a compact optical compensator designed for insertion into the incident‑light path to enhance birefringence contrast and standardise colour response in polarised light microscopy. First‑order red 530 nm retardation Slider mount for fast insertion Compatible with iScope polarising models Faster, reproducible contrast for polarised light inspection The 1λ plate supplies a constant 530 nm retardation, converting subtle phase differences into a stable colour shift that simplifies interpretation of stress patterns and birefringent structures. Mounted in a slider, the compensator is ready for rapid engagement or removal without disturbing the sample stage, which supports consistent imaging routines and reduces downtime between measurements. For laboratories requiring repeatable visual references, the fixed first‑order red response acts as a reliable optical standard. Clear optical reasoning that non‑specialists can follow A retarder or compensator introduces a known phase delay between orthogonal polarisation components; the first‑order red plate creates a single‑wavelength retardation equivalent to one lambda at roughly 530 nm, producing a characteristic red‑green colouration under cross polarisation. This controlled colour response makes it easier to distinguish materials and stress fields without complex calibration equipment. The effect is directly observable in transmitted or reflected light set‑ups that support incident‑light polarisation, aiding rapid assessment and documentation. Practical compatibility and application scenarios Engineered for iScope polarising units, the insert fits into the dedicated slider for incident‑light illumination, ensuring mechanical and optical alignment with the existing polariser/analyser train. Typical applications include qualitative stress analysis, contrast enhancement for transparent or semi‑transparent specimens, and routine teaching demonstrations where consistent visual cues accelerate learning. The compact format integrates with bench workflows, supporting both quick inspections and stepwise imaging protocols. Integration benefits and operational reliability Using a purpose‑made 1λ compensator minimises variability between sessions and operators, which contributes to stronger data comparability across samples and time. The slider mechanism enables safe handling and keeps the optical surface accessible for inspection and cleaning. Where image reproducibility and clear birefringence rendering are essential, this accessory provides a straightforward optical upgrade that harmonises with the existing iScope polarising configuration. For standardised polarisation contrast, select the Euromex IS.9610-R first‑order red 1λ plate and contact Metav Werkzeuge for product advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: IS.9610-R SKU: IS.9610-R Manufacturer: Euromex Product type: Microscope illumination Label: 1/λ‑plate first red 530 nm in slider for incident‑light illumination for iScope polarisation models Facts Wavelength: 530 nm Order: first‑order (1λ) Special features Slider mount for incident‑light path insertion Designed for iScope polarising models Provides first‑order red retardation for birefringence contrast FAQ What visual effect does the first‑order red 530 nm plate produce? The first‑order red plate produces a characteristic red‑green colouration under crossed polarisers, transforming phase differences into an immediate visual contrast that the Euromex IS.9610-R makes easy to observe. Is the slider compatible with all iScope polarising models? The slider is designed for iScope polarising models that accept accessory inserts; check the specific iScope configuration to confirm mechanical fit with the Euromex IS.9610-R. Can the retarder be used in reflected (incident) light only? The accessory is specified for insertion into the incident‑light path; its effect is optimised for reflected‑light polarising set‑ups on compatible iScope units. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise polarisation control and straightforward integration: the 530 nm first-order retardation and slider mounting ensure consistent transmitted-light contrast for polarised microscopy workflows. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice and delivery from Emmerich. 1/λ Plate First-Order Red 530 nm Slider for iScope Polarisation Models IS.9610 — Transmitted-Light Retarder by Euromex The 1/λ Plate First Red 530 nm (IS.9610) is a dedicated first-order retarder in a slider mount, designed for transmitted-light illumination within iScope polarisation model ranges to enhance contrast and reveal birefringent structures. First-order red retardation 530 nm Slider mount for transmitted light illumination Compatible with iScope polarisation models Accurate polarisation control for inspection and analysis The first-order (1/λ) retardation at 530 nm provides a well-defined phase shift for transmitted-light polarisation microscopy, facilitating reliable identification of birefringent materials. As a retarder plate, it produces a controlled colour shift that makes internal stresses, fibre orientations and crystalline structures visible; this enables repeatable results in quality control and material analysis. The optical specification is concise and directly supports quantitative interpretation of polarised images, reducing ambiguity during inspections. Simple integration and operational efficiency Mounted in a slider for transmitted-light illumination, this retarder is intended for quick insertion and removal from the optical path, allowing efficient alternation between polarised and non-polarised observation modes. The compact slider format minimises downtime during sample changes and supports workflows in teaching laboratories and production inspection benches. Compatibility with the iScope polarisation range means the accessory aligns with established holders and illumination geometries, maintaining optical alignment without additional adapters. Reliability for routine laboratory and teaching use Designed as an accessory for polarisation-capable microscopes, the component emphasises stability and consistent optical performance over repeated use. The defined 530 nm wavelength target ensures predictable interference colours, aiding both novice users and experienced microscopists in interpretation. When used in routine examinations, the plate contributes to faster decision making through clearer contrast and enhanced visibility of anisotropic materials, supporting productivity in both research and industrial environments. For component supply or technical clarification on the Euromex 1/λ Plate First-Order Red 530 nm (IS.9610), contact Metav Werkzeuge to arrange delivery from Emmerich and confirm compatibility with an existing iScope polarisation setup. Technical Data Article number: IS.9610 Manufacturer: Euromex Product type: Microscope illumination SKU: IS.9610 Facts Wavelength: 530 nm Retarder type: First-order (1/λ) Mount: Slider for transmitted-light illumination Compatibility: iScope polarisation models Special features Brand: Euromex Function: Enhances birefringence contrast Application: Polarisation microscopy, transmitted light Inclusion: Slider-mounted plate for quick use FAQ What optical effect does the 1/λ plate produce? The 1/λ plate (first-order red at 530 nm) introduces a fixed phase shift that creates characteristic interference colours, enabling clearer visualisation of birefringent structures when used with crossed polarisation on the Euromex 1/λ Plate First-Order Red 530 nm (IS.9610). Is this plate compatible with all iScope polarisation models? The IS.9610 is designed for iScope polarisation model ranges; it fits the slider slot used for transmitted-light polarisation accessories and is specified to match the geometry of those models. How does the slider mount benefit routine use? The slider format allows rapid insertion and removal of the retarder from the optical path, which reduces interruption during sample changes and supports quick switching between polarised and non-polarised observations with minimal realignment. Can this retarder be used for teaching as well as production inspections? Yes, the clear interference colours at 530 nm and the straightforward slider operation make it suitable for both educational demonstrations and consistent inspection tasks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact platform with a removable black/white stage plate Ø 60 mm for improved specimen contrast and straightforward integration into stereomicroscope workflows; practical for education and workshop inspection tasks. Order the microscope stage directly via Metav Werkzeuge or ask our consultants if needed. EduBlue ED.9956 microscope stage – removable black/white stage plate Ø 60 mm The microscope stage EduBlue ED.9956 is a compact accessory for stereomicroscopes, designed to provide simple contrast control and a stable platform for small specimens. Compatible with stereomicroscopes Removable black/white stage plate Ø 60 mm Compact, low-profile mounting SKU ED.9956 for straightforward ordering Improved contrast for clearer inspection and documentation The removable black/white stage plate with a diameter of Ø 60 mm enables rapid background changes to enhance contrast during visual inspection or photography. By switching between the black and white surfaces, the platform aids in distinguishing fine edges and translucent specimens that would otherwise blend into a single tone. This practical contrast control reduces the need for complex illumination adjustments and helps standardise visual results across multiple observations, supporting reliable comparisons in teaching and routine quality checks. Seamless integration into stereomicroscope workflows Designed for use with stereomicroscopes, the low-profile platform keeps the specimen close to the objective while preserving working distance and manoeuvrability. The stage's simple mounting and the readily removable plate allow quick adaptation between tasks, which is particularly useful in educational settings and busy workshops where different samples are inspected in sequence. Compatibility with the EduBlue documentation references (AP-1 and AP-2) ensures that the EduBlue series remains consistent across accessories and replacement parts, simplifying inventory and tool management. Practical handling and durable everyday use The stage is intended as a practical solution for repetitive inspection tasks: the removable plate simplifies cleaning and sample exchange, while the compact footprint keeps bench space free for other instruments. As part of the EduBlue family from Euromex, this accessory supports standard classroom and workshop procedures without adding unnecessary complexity. The straightforward design makes it easy to train staff and students on consistent sample presentation, improving throughput and reducing handling errors in routine microscopy work. Contact Metav Werkzeuge today for tailored advice on the Euromex EduBlue ED.9956 microscope stage and its compatibility with existing stereomicroscope setups; call +49 2822 7131930 or email info@metav-werkzeuge.com for information on availability and delivery from Emmerich Technical Data Article number: ED.9956 Manufacturer: Euromex Model series: EduBlue Product type: Microscope stage SKU: ED.9956 Facts Stage plate diameter: Ø 60 mm Special features Black/white stage plate Ø 60 mm (AP-1 and AP-2) Removable stage plate For stereomicroscopes Part of EduBlue series FAQ Is the stage compatible with stereomicroscopes? The stage is designed for use with stereomicroscopes; the EduBlue ED.9956 platform and its black/white stage plate Ø 60 mm suit typical stereo inspection tasks. Can the black/white plate be removed for cleaning? Yes, the black/white stage plate is removable, allowing easy cleaning and quick swapping between backgrounds for consistent contrast. What benefit does the Ø 60 mm plate offer? A Ø 60 mm plate provides a compact working area that supports small specimens while enabling rapid background changes to enhance visibility and documentation. Where is the product series mentioned in documentation? The EduBlue series references the black/white stage plate as AP-1 and AP-2 in the relevant EduBlue documentation; the ED.9956 is listed under that accessory group. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkezeuge.com

Benefit from a compact Ø 60 mm format and contrasting black/white surfaces that simplify specimen presentation; combine these features for reliable visual assessment in routine microscopy workflows and order the set directly via Metav Werkzeuge or consult the company's specialists for technical guidance. Pair of Stage Plates Ø 60 mm SB.9956 — Black/white plates for stereomicroscopes by Euromex Pair of Stage Plates Ø 60 mm SB.9956 offers contrasting stage inserts to improve sample visibility under stereo inspection, optimised for small specimens and routine laboratory workflows Pair of black and white plates Diameter 60 mm For stereomicroscopes Better contrast for faster visual assessment The set provides a clear visual distinction between dark and light backgrounds, enhancing the detection of edges, contours and small details. The contrasting black and white surfaces reduce preparation time by making specimens stand out immediately against the stage. For technicians who perform repetitive visual inspections, this contrast translates into more consistent observations and fewer repositions of samples. The design supports quick switching between backgrounds without the need for additional accessories, helping to maintain a smooth workflow in busy labs. Compact format that suits small specimens and tight setups With a precise Ø 60 mm diameter, these stage inserts are compact enough for confined stage areas yet large enough for many common sample types used in stereo observation. The small footprint makes the plates suitable where stage space is at a premium or when multiple accessories share the microscope stage. The modest size also simplifies alignment and centring of specimens, which contributes to faster set-up times and reduced handling — particularly useful in quality-control benches and educational workstations. Ready compatibility with stereomicroscopy workflows Designed for use with stereomicroscopes, the pair of inserts supports routine inspection tasks where illumination and perspective differ from compound microscopy. The contrasting backgrounds assist in both top-light and side-light arrangements by improving perceived depth and outline clarity. This set is particularly helpful when working with irregularly shaped or reflective samples, since the two-colour option enables selection of the background that offers the best visual separation for the material being inspected. Request technical advice or place an order through Metav Werkzeuge to ensure seamless integration of these Euromex stage plates into the existing microscopy setup — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SB.9956 SKU: SB.9956 Manufacturer: Euromex Product type: Microscope stage Label: Paar Objekttisch-Platten (schwarz/weiß) Ø 60 mm SB.9956 Dimensions / Measurables Diameter: 60 mm Design & Compatibility Pair of black and white plates For stereomicroscopes Contrast-enhancing stage inserts FAQ What is the exact diameter of these stage plates? The Euromex pair of stage plates SB.9956 has a diameter of 60 mm. Are these inserts suitable for stereomicroscopes? Yes, the SB.9956 stage plates are designed for use with stereomicroscopes and support common reflected-light inspection setups. How do the black and white plates improve observation? The contrasting black and white surfaces in the Euromex SB.9956 set enhance edge detection and improve sample visibility, reducing handling and speeding up routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a frosted glass surface combined with a compact Ø 60 mm diameter and straightforward compatibility for efficient sample handling and reliable visual contrast. Order the EduBlue ED.9950 stage plate directly via Metav Werkzeuge or contact our consultants for tailored advice. EduBlue ED.9950 microscope stage plate — frosted glass, Ø 60 mm, for stereomicroscopes (Euromex) EduBlue ED.9950 is a compact stage plate designed to improve specimen visibility and handling under stereomicroscopes in educational and light‑duty laboratory settings Frosted glass, opaque surface Ø 60 mm diameter Designed for stereomicroscopes Enhanced visibility through diffused illumination A frosted glass surface scatters incident light to reduce specular reflections and produce a more uniform background, which increases perceived contrast for small or translucent specimens. This translucent, opaque finish helps avoid distracting hotspots when using incident illumination or oblique lighting techniques common with stereomicroscopes, so users can focus on structural detail rather than glare. For teaching environments and routine inspections, the result is a more consistent image that supports rapid assessments and clearer demonstrations. Compact form factor that fits routine workflows The Ø 60 mm diameter makes the stage plate particularly suitable for small parts, slides and micro‑assemblies, optimising the usable workspace on standard stereomicroscope platforms. The modest footprint aids precise positioning of components and simplifies stage movements without obstructing the operator’s field of view. As a single‑element replacement or accessory, the plate integrates with existing stage clips or holders and supports straightforward exchange, contributing to minimal downtime during instrument preparation. Practical handling and maintenance advantages A glass stage plate is simple to clean and maintains stable optical properties over time, supporting reproducible results in repeated observations. The EduBlue ED.9950 stage plate requires only routine wiping to remove residues, and its surface resists rapid wear typical of softer materials. For classroom settings and light industrial use, this translates into lower maintenance overhead and dependable performance across multiple sessions, preserving image quality and reducing interruptions to teaching or inspection tasks. Contact Metav Werkzeuge today to discuss compatibility details or to arrange supply of the EduBlue ED.9950 stage plate; Metav’s consultants can advise on integration with specific stereomicroscope models and delivery options from Emmerich. Technical Data Article number: ED.9950 SKU: ED.9950 Brand: Euromex Model series: EduBlue Product type: Microscope stage plate Key measurements Diameter: 60 mm Surface: Frosted glass, opaque Compatibility and application For stereomicroscopes Intended for small specimens and educational use Easy to clean surface FAQ What lighting benefits does a frosted stage plate offer? A frosted glass plate diffuses light to reduce glare and hotspots; the EduBlue ED.9950 stage plate improves background uniformity and perceived contrast when inspecting specimens under a stereomicroscope. Will this stage plate fit any stereomicroscope stage? The EduBlue ED.9950 is sized at Ø 60 mm for compact applications and is designed for standard stereomicroscope setups; verify stage clip or holder dimensions before installation for secure mounting. How should the stage plate be maintained? Clean the frosted glass surface with a lint‑free cloth and suitable, non‑abrasive cleaner; routine wiping preserves the optical texture and prolongs consistent imaging with the EduBlue ED.9950. Is the plate suitable for both incident and transmitted illumination? Yes; the opaque, frosted finish is primarily beneficial for incident lighting scenarios common with stereomicroscopes, enhancing contrast for reflective and translucent specimens. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, transparent work surface that combines clarity and robustness for precise specimen inspection; the Ø 60 mm plexiglass design fits small stereomicroscope setups and is straightforward to maintain. Order or request advice via Metav Werkzeuge for fast supply and technical guidance. Transparent Plexiglass Stage Ø 60 mm — Euromex SB.9952 The Transparent Plexiglass Stage Ø 60 mm SB.9952 that serves as a compact, clear tabletop for stereomicroscopes, enabling dependable sample support in laboratory, educational and workshop environments Transparent plexiglass for clear sample view Diameter Ø 60 mm for compact installations Compatible with stereomicroscopes Easy to clean, lightweight and durable Clear visual access for precise inspection The transparent construction delivers unobstructed sightlines to small specimens, making fine adjustment and observation simpler under a stereomicroscope. As a lightweight plexiglass disc, the stage minimises reflections and provides a neutral background that assists in contrast management when inspecting delicate parts or biological samples. The compact format is particularly suited to benches with limited space, where a small, reliable viewing area supports repeatable positioning and efficient workflow. Robust material choice for everyday use Crafted from acrylic, the tabletop combines impact resistance with consistent optical clarity, reducing breakage risk compared with thin glass alternatives. The Ø 60 mm diameter offers a stable platform for small mounts and Petri dishes while remaining simple to handle and replace if required. This functional design supports frequent use in teaching labs and routine quality checks, where endurance and predictable behaviour under lighting are key factors in maintaining measurement and inspection routines. Low-maintenance handling and safe cleaning The smooth surface of the acrylic stage allows straightforward maintenance: routine cleaning removes dust and residues without specialised agents. Its easy to clean nature helps preserve optical quality and reduces downtime between sessions. The lightweight construction facilitates rapid exchange for different optical setups and minimises strain during repeated adjustments, contributing to a more efficient inspection cycle in multi-shift or classroom environments. Versatile fit for microscopes and workflows Designed specifically for use with stereomicroscopes, the disc is compatible with a range of stands and illumination arrangements commonly used in workshops and laboratories. The modest footprint makes it a practical choice for experimental rigs, educational benches and component inspection stations that require a compact clear stage. The combination of clarity, durable material and simple geometry supports consistent visual results and easier integration into existing setups. For product advice and reliable supply of the Euromex Transparent Plexiglass Stage (SB.9952), contact Metav Werkzeuge in Emmerich for tailored recommendations and prompt delivery at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: SB.9952 SKU: SB.9952 Brand: Euromex Product type: Microscope stage Material: Transparent Plexiglas (acrylic) Dimensions / Measurable data Diameter: Ø 60 mm Features / Applications Intended for: stereomicroscopes Form: round transparent tabletop Suitable environments: laboratory, education, workshop FAQ Is this stage suitable for all stereomicroscopes? The Transparent Plexiglass Stage Ø 60 mm SB.9952 by Euromex is intended for use with stereomicroscopes that accommodate a compact round stage; compatibility depends on the instrument's stage mount and working distance. How should the plexiglass tabletop be cleaned? Clean the Euromex tabletop with a soft cloth and mild detergent; the acrylic material resists everyday contaminants and is designed for simple maintenance without abrasive cleaners. Can this stage be used with transmitted illumination? The transparent nature of the SB.9952 allows light to pass through for many transmitted illumination setups, subject to the specific lighting configuration of the stereomicroscope. Is the material scratch-resistant? The stage is made from durable acrylic, which offers improved impact resistance compared with thin glass; however, like all polymer surfaces it can be scratched and should be handled with care. What is the primary application for this tabletop? The Euromex SB.9952 is primarily intended as a compact, clear support for specimen observation on stereomicroscopes in educational, laboratory and light workshop settings. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the simple contrast control and standard sizing of these stage plates to improve specimen visibility and routine workflow; the pair of black/white plates and their Ø 90 mm diameter provide flexible backgrounds for a range of samples. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Pair of stage plates (black/white), Ø 90 mm by Euromex — microscope stage plates for stereo microscopes The Pair of stage plates (black/white), Ø 90 mm is designed as a practical contrast solution for stereo microscopes, offering immediate background selection for opaque or translucent specimens. Black and white contrast plates Ø 90 mm for standard stages Pair for quick background switching Improved contrast for reliable inspection results The pair of stage plates delivers a straightforward way to control background contrast during routine inspection. The black surface helps to emphasise light-coloured, translucent samples, while the white side provides a neutral background for darker specimens. This contrast selection reduces the time spent adjusting illumination and visual filters, thereby increasing throughput in inspection tasks. The plates’ role is purely optical, so they complement existing illumination setups without altering microscope calibration. Simple compatibility with standard stereo microscope stages With a defined diameter of Ø 90 mm, these plates are intended for microscopes and stages that accept 90 mm inserts. The standard sizing simplifies integration into common stereo microscope workflows and ensures a snug fit in compatible stage openings. Because the product is a pair, it allows rapid switching between backgrounds during sample preparation or comparison tasks, supporting efficient step-by-step processes in laboratory or workshop environments. Practical guidance and procurement support For users uncertain about fit or suitability, the plates are a low-complexity accessory that typically requires no modification to the stage; they serve as an immediate contrast option for both novice and experienced operators. When additional technical details or compatibility checks are needed, Metav Werkzeuge provides assistance and can confirm whether the Euromex set matches specific stage systems. For further questions, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice. For reliable contrast solutions from Euromex, contact Metav Werkzeuge for expert advice and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9956 SKU: NZ.9956 Manufacturer: Euromex Product type: Microscope stage plates Facts Diameter: 90 mm Special features Pair of plates in black and white For stereo microscopes / stage inserts Provides background contrast for opaque and translucent specimens FAQ Are these plates suitable for stereo microscopes? The Euromex pair of stage plates is intended for use with stereo microscopes and fits stage openings compatible with a 90 mm diameter insert. How does the black/white pair improve inspection? Using the black and white sides of the plates enhances specimen contrast; the black side highlights light or translucent samples while the white side offers a neutral background for darker subjects when using the Euromex stage plates. Is any modification required to fit the plates? No modification is typically necessary; the Euromex plates are designed as stage inserts for stages accepting Ø 90 mm plates. Who to contact for confirmation of compatibility? For compatibility checks and procurement, Metav Werkzeuge provides technical advice and order support for the Euromex NZ.9956 stage plates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com