Take advantage of precise 30 x 40 mm travel and a mechanical X‑Y control to speed up specimen alignment in polarised‑light work; order the accessory directly via Metav Werkzeuge or contact the consultancy team for application advice. Optional mechanical X‑Y stage 30 x 40 mm for iScope polarisation microscopes (IS.9522) by Euromex An optional mechanical X‑Y stage 30 x 40 mm for precise specimen positioning on iScope polarisation microscopesis designed to improve repeatability and workflow in polarised‑light investigations. Mechanical X‑Y travel 30 x 40 mm Designed for iScope polarisation microscopes Fine mechanical positioning control Compact footprint for crowded benches Faster, more reliable positioning for polarised‑light analysis A compact mechanical X‑Y stage with a 30 x 40 mm travel range enables measured lateral movement of specimens under the microscope, reducing time lost to re‑locating regions of interest. The mechanical control system offers fine adjustment, which is particularly helpful when comparing successive views or when rotating specimens for polarisation contrast. This benefit translates into fewer interruptions during sample examination and a smoother workflow in routine laboratory or educational settings. Simple integration with iScope polarisation microscopes The accessory is tailored for installation on the iScope series, ensuring straightforward integration into existing polarised‑light setups. Its mechanical design keeps the stage operation intuitive and maintenance minimal, while the compact size preserves valuable bench space. Because the unit is optional and modular, laboratories can upgrade an existing instrument for enhanced positional control without replacing the main microscope body. Practical benefit for testing and documentation Repeatable lateral adjustment supports comparable imaging and systematic documentation of polarised specimens, aiding quality control and research reproducibility. The stage assists in aligning samples precisely for photomicrography or measurement tasks and reduces the risk of missing critical microstructures during inspection. For users uncertain about compatibility or application suitability, Metav Werkzeuge provides further technical clarification and specifications. Contact Metav Werkzeuge for compatibility advice and to request the Euromex IS.9522 X‑Y stage for iScope polarisation microscopes Technical data Article number: IS.9522 SKU: IS.9522 Brand: Euromex Product type: Microscope stage Label: Optionaler mechanischer X‑Y‑Tisch 30 x 40 mm für Polarisationsmikroskope iScope IS.9522 Facts Travel range: 30 x 40 mm Special features Optional mechanical X‑Y stage Compatibility with iScope polarisation microscopes Mechanical positioning control for precise specimen alignment FAQ What is the lateral travel range of the stage? The lateral travel range is 30 x 40 mm, specified for the Euromex IS.9522 mechanical X‑Y stage used with iScope polarisation microscopes. Can the stage be retrofitted to an existing iScope microscope? Yes, the IS.9522 is an optional accessory explicitly intended for integration with iScope polarisation microscopes, allowing retrofitting where the instrument mount is compatible. How does the mechanical control improve imaging work? Mechanical fine adjustment on this stage enables repeatable specimen positioning, which assists in comparative imaging, photomicrography and systematic inspection using polarised light. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a precise blue filter with a compact 45 mm diameter yields controlled illumination and improved contrast in microscopy applications; order the blue filter IS.9700 directly via Metav Werkzeuge or consult our advisors for compatibility and stock information. Blue filter 45 mm for lamp housing IS.9700 — Euromex microscope filter, 45 mm diameter for lamp housings Blue filter 45 mm for lamp housing IS.9700 is a purpose-made accessory for microscope illumination systems, designed to be fitted into compatible lamp housings to refine light characteristics and support clearer imaging. Blue filter for microscope illumination 45 mm diameter for standard lamp housings Article number IS.9700 by Euromex Improved contrast through targeted illumination The blue filter shifts the spectral composition of the lamp output towards shorter wavelengths, which can enhance visual contrast for certain specimens and reduce dominant warm tones from halogen or LED light sources. For routine inspection and educational microscopy, this results in sharper perceived edges and more distinct colour separation without altering the optical path. The accessory is intended for integration into the lamp assembly rather than the objective or eyepiece, so the effect is applied at the illumination stage and is compatible with standard transmitted and reflected light set-ups. This approach helps to accentuate details in stained samples and surface features while maintaining a simple, passive modification to the lighting. Compact, compatible design for simple integration With a nominal diameter of 45 mm, the filter is sized to suit common lamp housings used in microscopy accessories; the compact format supports quick installation and minimal adjustment of the existing lighting unit. The product is presented as an accessory component for microscope illumination systems and is identified under IS.9700 for ordering and inventory purposes. Due to its straightforward form factor, the filter can be combined with other illumination accessories such as diffusers or polarising elements, enabling modular adaptation of the light source without extensive reconfiguration. The compact design reduces the footprint within the lamp housing while providing a consistent optical effect. Practical considerations for laboratory and workshop use The filter is supplied as a dedicated microscope accessory and listed under the Euromex range, making it suitable for quality-controlled laboratory environments and educational institutions. As a passive optical component, it requires no electrical connection and imposes no maintenance beyond occasional cleaning with appropriate, non-abrasive materials. For procurement and logistical reliability, the item is available through Metav Werkzeuge, where stock levels and delivery options can be checked; the clear article reference IS.9700 ensures correct ordering and reduces the chance of specification errors. When in doubt about compatibility with a particular lamp housing, technical advisors can verify fitment using the lamp aperture and accessory mounting details. For availability and tailored advice on the Euromex blue filter IS.9700, contact Metav Werkzeuge for stock checks and specification guidance at Metav Werkzeuge GmbH. Technical Data Article number: IS.9700 SKU: IS.9700 Manufacturer: Euromex Product type: Microscope filter Label: Blauer Filter 45mm für Lampengehäuse IS.9700 Facts Diameter: 45 mm Image file name: IS.9700.jpg Image file size: 97,751 bytes Special features Blue optical filter For lamp housing applications Microscope illumination accessory Category: Filter (Microscopy accessories) FAQ What is the primary effect of the blue filter on microscopy illumination? The blue filter IS.9700 narrows and shifts the lamp spectrum towards blue wavelengths, which enhances contrast and colour separation for many specimens when fitted into the lamp housing. Will the filter fit any microscope lamp housing? The filter is designed for a 45 mm diameter aperture; compatibility depends on the lamp housing's internal diameter and mounting method, so verify the lamp aperture before ordering IS.9700. How should the filter be cleaned and maintained? Clean the glass surface gently with a lint-free cloth and mild optical cleaner; avoid abrasive materials to preserve the filter coating and optical quality of IS.9700. Is the Euromex filter suitable for both transmitted and reflected light setups? Yes, the filter is an illumination accessory and can be used with both transmitted and reflected lighting systems, provided the lamp housing accepts a 45 mm accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise colour filtration and simple integration for consistent illumination in inspection and imaging workflows; the combination of reliable spectral control and standard 45 mm sizing ensures repeatable results — order the green filter via Metav Werkzeuge or consult the technical team for compatibility checks. Green Filter 45 mm for Lamp Housing IS.9702 — Green illumination filter, 45 mm diameter, Euromex The Green Filter 45 mm for Lamp Housing IS.9702 is a compact microscope illumination filter intended to modify light output for improved contrast and colour balance in inspection and imaging applications. Accurate colour correction for illumination Compact 45 mm diameter for standard housings Simple insertion for lamp assemblies Compatible with microscope illumination systems Consistent colour and improved contrast for reliable inspection The green filter IS.9702 shifts lamp emission toward the green spectral band to enhance spectral contrast for colour-sensitive tasks. In practice, this results in clearer differentiation of features under transmitted or reflected light, which supports faster decisions in routine inspection. The standard 45 mm diameter ensures compatibility with a wide range of lamp housings used in laboratory and workshop environments, providing a predictable optical effect without the need for additional accessories. Quick integration into existing illumination setups Designed for direct use in lamp housings, the accessory permits simple insertion and can be used in typical microscope illumination chains. Because the component is a dedicated illumination filter, it reduces the need for software post-processing by delivering a more suitable colour balance at source. The reduced setup complexity increases throughput for repetitive tasks and lowers the risk of variation between sessions, making the filter a practical choice for both educational and industrial microscopy applications. Reliable supply and experienced distribution for professional use Procurement through an established supplier provides continuity for production and lab operations. Metav Werkzeuge acts as a quality filter in the supply chain and combines practical logistics with sector expertise, supporting access to precision accessories across Europe. With an extensive portfolio and a history of servicing many workshops, Metav offers dependable availability and product information to support integration into inspection workflows, helping to maintain consistent results. For procurement guidance and availability of the IS.9702 green filter, contact Metav Werkzeuge for expert advice and compatibility checks for existing lamp housings. Technical data Article number: IS.9702 SKU: IS.9702 Product type: Microscope filter Manufacturer: Euromex Label: Grüner Filter 45mm für Lampengehäuse IS.9702 Facts Diameter: 45 mm Image file size: 92,762 bytes Image filename: IS.9702.jpg UID: IS.9702 Special features Green optical filter for lamp housing Intended for microscope illumination Compatible with 45 mm lamp holders FAQ What is the primary function of this filter? The green filter IS.9702 narrows lamp output toward the green band to increase contrast and improve visual separation of colour-dependent details during microscopy inspections. Which lamp housings is the accessory compatible with? The component is intended for lamp housings that accept a 45 mm insert; compatibility with specific assemblies depends on the housing inner diameter and mounting method. Can this filter be used with microscopes for transmitted and reflected light? Yes, the filter is suitable for both transmitted and reflected illumination where a green-dominant spectrum improves feature visibility in microscopy and visual inspection tasks. How should the filter be handled and cleaned? Handle the optical surface with care; clean using a soft, lint-free cloth and suitable optical cleaner. Avoid abrasive materials and excessive pressure on the glass surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 45 mm white diffusion element and its compatibility with standard lamp housings to achieve more consistent illumination and fewer retakes in routine microscopy. Order the filter directly via Metav Werkzeuge or consult the Metav team for compatibility details and rapid delivery. Euromex IS.9706 — White 45 mm microscope filter for lamp housings The Euromex IS.9706 is a white diffusion filter designed to produce even illumination in microscope lamp housings and similar lighting assemblies. 45 mm diameter for standard lamp housings Uniform white light diffusion Designed for straightforward installation Consistent illumination for reliable image capture A white diffusion element evens out light output from the lamp housing, reducing hotspots and reflections that can impair image quality. The 45 mm diameter matches common lamp-seat dimensions, so the result is uniform illumination across the field of view. Less variance in light distribution translates into fewer repeated captures and a steadier baseline for image analysis, which supports efficient laboratory routines and dependable documentation. Fits typical microscope lamp housings for quick integration The component is intended specifically for installation into microscope lamp assemblies and analogous housings; its nominal 45 mm size makes it suitable for many standard fittings. As a passive optical accessory, it integrates without electrical modification, offering a straightforward option for retrofitting existing lighting setups. Compatibility with conventional lamp seats simplifies stocking decisions and reduces the need for multiple, specialised spare parts. Improves visual comfort and analytical consistency By producing softer, more evenly distributed light, the white filter reduces glare and eases visual fatigue during prolonged inspections. The diffusion effect enhances contrast uniformity without altering colour balance, which is beneficial for both human observation and digital imaging workflows. This small optical addition can therefore contribute to higher throughput by lowering the incidence of rework due to uneven lighting. Simple handling with practical benefits for workshops and labs The design focuses on practicality: a compact microscope filter that is easy to store and deploy as part of routine maintenance of illumination systems. The unobtrusive white diffuser supports consistent results over repeated sessions and fits into organised spare-part inventories. For teams aiming to standardise lighting across multiple instruments, the filter offers a low-effort measure to harmonise performance between stations. For reliable, uniform illumination in microscopy applications, request the Euromex IS.9706 white filter from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast dispatch. Technical Data Article number: IS.9706 SKU: IS.9706 Manufacturer: Euromex Product type: Microscope filter Data Diameter: 45 mm Image file size: 52329 bytes Special features White diffusion filter For lamp housings Product label: Weißer Filter 45mm für Lampengehäuse IS.9706 Intended application: microscope lamp illumination FAQ What diameter does the filter have? The Euromex IS.9706 is specified with a 45 mm diameter for use in matching lamp housings. What is the intended application of this component? This component is a white diffusion microscope filter intended for use in microscope lamp housings and similar illumination assemblies. Which article number and SKU identify this product? The item is listed as IS.9706 and uses the same value for the SKU. Who manufactures the filter? The filter is produced by Euromex and sold under the designation IS.9706 as a microscope illumination accessory. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact optical solution that combines a yellow filter with a standard 45 mm diameter for consistent lamp-housing compatibility; the result is improved contrast in transmitted-light applications and straightforward integration into existing microscope illumination. Order supply or request compatibility advice via Metav Werkzeuge if required. Euromex IS.9704 yellow 45 mm microscope lamp filter — yellow filter, 45 mm diameter Euromex IS.9704 is a yellow microscope lamp filter designed to fit lamp housings and to modify illumination for clearer, higher-contrast transmitted-light observation. Yellow 45 mm diameter for lamp housings Fits standard microscope lamp holders Manufactured by Euromex optical accessories Enhanced contrast for transmitted-light inspection A dedicated yellow filter provides a simple, effective way to adjust the light spectrum reaching the specimen, improving visual differentiation of features under transmitted light. By selectively attenuating portions of the illumination, the filter increases apparent contrast for many common samples, which can reduce the need for repeated staining or complex image processing. This optical solution delivers a tangible benefit in routine inspection tasks: faster visual assessment with fewer adjustments to the microscope's illumination system. Simple compatibility and quick installation With a nominal diameter of 45 mm, the filter is sized for insertion into compatible lamp housings and holders found on many standard microscope illumination modules. The compact form factor enables a straightforward retrofit without modification of the light source, offering a practical route to upgrade existing setups. Installation and removal require no specialised tools, which helps to keep downtime low and supports continuous operation in busy labs or workshop environments. Reliable accessory for everyday microscopy workflows The filter is intended as a maintenance-friendly accessory for microscopy work where reproducible lighting conditions are important. As a passive optical component it demands minimal care: periodic cleaning of the optical surface preserves image quality and prevents stray reflections. The design supports consistent results across repeated inspections, helping to standardise visual evaluation and to enhance process reliability in quality control or educational settings. Expert supply and advice from a precision partner Metav positions itself as a partner for accessible precision: a central supplier with extensive inventory and practical expertise for laboratory and workshop customers. Benefit from a supplier that combines broad product availability with technical knowledge, supported from a logistics hub in Emmerich. For questions about fitment, compatibility with a particular illumination module, or batch supply for installation across multiple instruments, Metav Werkzeuge can provide targeted advice and procurement support. For compatibility checks or to discuss supply of the Euromex IS.9704 yellow 45 mm microscope lamp filter for specific equipment, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a tailored recommendation and delivery. Technical data Article number: IS.9704 SKU: IS.9704 Manufacturer: Euromex Product type: Microscope filter Label: Gelber Filter 45mm für Lampengehäuse IS.9704 Core specifications Diameter: 45 mm Image file size (product image): 67991 bytes Special features Yellow optical filter For lamp housings (45 mm) Category: Microscope filter Product image available: IS.9704.jpg FAQ What effect does a yellow filter have on transmitted-light microscopy? A yellow filter modifies the illumination spectrum to increase contrast in transmitted-light observations; the Euromex IS.9704 yellow filter is suitable where warmer, higher-contrast lighting improves visual differentiation of sample features. Will the IS.9704 fit my microscope lamp housing? The IS.9704 is specified with a 45 mm diameter for lamp housings; compatibility depends on the lamp-holder design, so verify the holder diameter on the instrument or consult Metav Werkzeuge for confirmation. How should the yellow filter be cleaned and maintained? Clean the optical surface with a lint-free cloth and appropriate optical cleaner; avoid abrasive materials. Regular cleaning keeps the filter performing reliably in routine microscopy workflows. Can the filter be used with LED and halogen illumination? The yellow filter is a passive optical accessory that can be used with common light sources such as LED or halogen lamps, provided the physical holder matches the 45 mm diameter requirement. Is the filter intended for professional laboratory use? Yes. The filter is designed as a practical accessory for microscopy applications where consistent illumination control and improved contrast are desirable; the Euromex IS.9704 supports standard inspection and educational uses. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 45 mm format combined with reliable yellow spectral filtration to enhance contrast in transmitted-light microscopy; order or request advice easily through Metav Werkzeuge for rapid procurement and technical support. Euromex Yellow Filter for Lamp Housing DX.9704 — 45 mm microscope filter Euromex DX.9704 is a yellow microscope filter designed for insertion into lamp housings to improve contrast and colour balance in brightfield illumination. Yellow spectral filtering for contrast enhancement 45 mm diameter for lamp housings Designed for microscope illumination systems Simple installation and routine upkeep Improve contrast with targeted spectral control A yellow filter alters the lamp spectrum by attenuating shorter wavelengths, which can reduce excessive blue light and help enhance contrast in many transparent or lightly stained specimens. This spectral adjustment supports clearer visual separation of structures without changing objective settings, enabling more consistent observation. The result is a more reliable image rendition under transmitted-light conditions, beneficial in routine inspection and quality-control workflows. Compact 45 mm format for straightforward integration The 45 mm diameter is a decisive specification for compatibility with lamp housings that accept a 45 mm aperture. The compact format simplifies replacement and keeps the illumination path stable, reducing the need for repeated adjustments. Because the component is intended specifically as a lamp housing accessory, fitting it does not require modifications to the illumination assembly; this preserves alignment and repeatability during inspection tasks. Practical benefits for everyday microscopy tasks As a microscope filter, the DX.9704 by Euromex supports improved visual clarity in applications where colour balance and contrast matter, such as routine sample checks and preparatory inspection stages. The filter’s effect is immediate and reversible: it is a non-invasive optical accessory that complements existing lighting rather than altering imaging hardware. This makes it a pragmatic choice for laboratories and workshops seeking straightforward enhancements to image quality. Simple maintenance keeps optical quality consistent Maintenance is kept deliberately simple to preserve optical performance. Regular checks for dust and fingerprints, coupled with gentle cleaning using lens tissue and an appropriate optical cleaner, will maintain transmission characteristics and prevent artefacts. The filter’s role in the illumination path means that modest care extends service life and preserves consistent spectral balance across inspections. For procurement and technical guidance on the Euromex DX.9704 yellow filter, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9704 Brand: Euromex Product type: microscope filter Data Diameter: 45 mm Special features Yellow filter for lamp housing FAQ What is the exact diameter of the filter? The Euromex DX.9704 filter has a diameter of 45 mm and is intended for lamp housings that accept this size. What does a yellow filter achieve in microscopy? A yellow filter reduces shorter wavelengths and helps to enhance contrast and colour balance in transmitted-light observation, improving visual separation of fine features. Will this filter fit my microscope lamp housing? The DX.9704 is designed for lamp housings with a 45 mm aperture; compatibility depends on the lamp housing dimensions rather than the microscope brand. How should the filter be fitted into the lamp housing? The filter is installed directly into the lamp housing aperture; it is designed as an accessory for insertion without modification to the illumination assembly. How can the filter be cleaned and stored? Clean with lens tissue and a suitable optical cleaner; store in a dust-free container when not in use to preserve transmission and prevent surface damage. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of robust cast base, large extension range and a massive crossbar for secure and repeatable microscope mounting. Order the mount directly via Metav Werkzeuge or contact the consultants for specification support and integration advice. Mount for Universal Stand SF11 — large extension range & heavy-duty crossbar (Metav IndustryLine) The Mount for Universal Stand SF11 provides a heavy‑duty, long‑reach support solution for stereo microscope applications and industrial optical tasks Robust cast base for low vibration Wide extension range for flexible positioning Massive crossbar for secure mounting Compatible with universal stereo stands Stable foundation for accurate optical work A heavy cast base delivers the primary benefit of reduced vibration and improved repeatability for optical inspection tasks. The solid construction ensures that a microscope or inspection head remains steady during measurement or documentation, which translates directly into better image stability and fewer retakes. Built for workshop and laboratory environments, the support reduces setup variability and helps maintain consistent focus and alignment when performing visual inspection or assembly tasks. Long reach and flexible positioning to increase access Thanks to the large extension range and the massive crossbar, the assembly offers extended reach without sacrificing rigidity. This allows operators to position an optical head over larger workpieces or to reach recessed areas while keeping the instrument correctly aligned. The design permits quick height and lateral adjustments, reducing setup time and enabling ergonomic placement of the microscope for both inspection and operation. The flexible geometry supports diverse workflows in quality control, small-series assembly and research benches. Designed for industrial use and simple integration The mount is tailored to pair with universal stands for stereo microscopes, providing compatibility with common head fittings and clamping systems. The device is classified within industrial optics equipment and is supplied by Metav IndustryLine, which acts as a quality filter for the European market. The rugged build and clear functional focus make the mount suitable for production environments where reproducible positioning and robust handling are required. Technical documentation and product identifiers accompany the unit to support procurement and inventory processes. Contact Metav Werkzeuge for details on integrating the SF11 mount into existing inspection stands; Metav Werkzeuge can provide technical advice and delivery options from Emmerich. Technical data Article number: M503.237.1 GTIN: 4054469145112 Type: SF11 ECLASS: 32130102 Customs tariff number: 90119090 Manufacturer: Metav IndustryLine Facts Material: cast base Feature: large extension range Feature: massive crossbar Category: Optik Special features Compatible with universal stands for stereo microscopes Robust construction for low vibration Industrial workshop and laboratory suitability Heavy‑duty crossbar for secure mounting FAQ What materials form the base of this mount? The mount is built on a cast base, providing mass and damping for stable optical setups and reliable positioning. Is the mount compatible with standard microscope stands? Compatibility is designed for universal stands used with stereo microscopes; the SF11 mount fits common clamp and head configurations. Which features improve positioning accuracy? The massive crossbar and the large extension range increase reach while maintaining stiffness, reducing deflection during inspection tasks. What identifiers should be used when ordering or specifying this mount? Use the article number M503.237.1 and GTIN 4054469145112 to ensure the correct SF11 mount from Metav IndustryLine is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise sample positioning, robust mechanics and straightforward readout for reliable microscopy workflows; order the stage directly via Metav Werkzeuge or consult the team for application advice. Mikroskoptisch EcoBlue EC.9500 — attachable mechanical X‑Y stage, 51 × 26 mm travel (Euromex) The Mikroskoptisch EcoBlue EC.9500 is an attachable mechanical X‑Y stage designed to bring controlled lateral movement to educational and routine laboratory microscopes in a compact format Attachable mechanical X‑Y stage 51 × 26 mm translation range Double vernier with separate horizontal knobs Faster sample alignment through precise lateral control The mechanical X‑Y stage offers a compact and reliable way to position specimens with repeatable accuracy. With a 51 × 26 mm translation range, the platform allows fine lateral movements while preserving working distance, so slide navigation becomes more efficient and less time-consuming. The integrated double vernier enables readable sub-divisions for coarse and fine adjustments, which reduces repositioning time and contributes directly to improved throughput in teaching or routine inspection tasks. The clear mechanical feedback of the separate horizontal knobs supports controlled steps and prevents inadvertent overshoot, making specimen handling both faster and safer. Built for educational benches and routine laboratory use As an attachable accessory, the stage fastens to a wide range of microscope frames, transforming standard stands into more versatile inspection systems without complex retrofitting. The platform’s straightforward construction is deliberately robust, designed for repeated daily handling in classrooms, service workshops and quality-control benches. Low complexity in the mechanics translates into low maintenance requirements and predictable long-term performance, which makes this stage a practical choice where ease-of-use and uptime are priorities rather than elaborate automation. Clear readout and understandable adjustment for confident operation The twin-scale layout of the vernier provides interpretable position feedback even for users new to precision stages: one scale for the main coarse position and a second vernier for fine interpolation. This arrangement simplifies the concept of graduated movement, so teams can rely on measured shifts rather than guesswork. The readable markings combined with tactile knobs allow precise incremental steps and straightforward documentation of sample coordinates, aiding repeatable observation and straightforward handover between users. Practical benefits for workshops and teaching environments This platform is particularly attractive where a compact footprint and dependable mechanical control are required. The stage supports routine microscopy workflows by enabling controlled sample scanning and documented positioning without the need for electronic drives. Its practical design contributes to a cost-effective upgrade path for institutions and small laboratories seeking measurable gains in handling efficiency. If clarification is needed regarding compatibility or intended use, assistance is available to help match the stage to the specific microscope stand or application. Contact Metav Werkzeuge today for tailored advice and to secure this attachable stage for improved sample alignment on every microscope Technical data Article number: EC.9500 SKU: EC.9500 Model series: EcoBlue Product type: microscope stage Brand: Euromex Measurements / Performance Translation range: 51 × 26 mm Special features / Design Attachable mechanical X‑Y stage Double vernier scale Separate horizontal adjustment knobs Suitable for microscopes (education and routine laboratory use) FAQ How much lateral travel does the stage provide? The EcoBlue EC.9500 offers a translation range of 51 × 26 mm, enabling controlled lateral movement across typical specimen sizes. Is the stage compatible with different microscope stands? The attachable design is intended for common microscope frames and adapts the inspection bench to controlled X‑Y movement without complex installation. How does the double vernier support fine positioning? The double vernier gives a coarse main scale and a secondary finely graduated vernier, allowing precise interpolation for repeatable specimen placement. Is the mechanism suitable for classroom use? Yes, the robust mechanical design and clear readout make the platform well suited to educational environments and routine laboratory tasks. Can the stage be used for documentation of sample positions? The readable scales and tactile knobs enable documented and reproducible positioning, aiding routine inspection and repeated observations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Robust cast-iron support, a 545 mm outreach arm and a Ø37×475 mm column combine to deliver stable, vibration-resistant positioning for stereo microscopes; the large extension range and massive crossbar accommodate heavier accessories and versatile inspection setups. Order the Universal stand directly via Metav Werkzeuge or consult our product specialists for application advice. Universal stand U3 – Heavy-duty cast-iron base with 545 mm arm (Metav IndustryLine) Universal stand U3 designed to support stereo microscopes with an extended reach and a sturdy crossbar for demanding inspection and assembly tasks Heavy-duty cast-iron base 254×254×40 mm 545 mm outreach arm for extended working radius Ø37×475 mm column for rigid vertical support 25 mm mounting bore for standard clamps Exceptional stability for accurate visual inspection A firm foundation matters when every micron counts. The cast-iron base (254×254×40 mm) reduces vibration and shifts during measurement, so optical alignment and fine manipulations remain reliable. This stability translates into fewer retakes and faster set-ups in both workshop and laboratory contexts, improving throughput without compromising on accuracy. The design supports handheld adjustments and tool changes while keeping the inspection plane steady. Extended reach and adaptable mounting for flexible workflows Longer reach meets secure support: the 545 mm arm provides a broad working radius while the Ø37×475 mm column maintains vertical rigidity. Together with the 25 mm mounting bore, the stand accepts common microscope clamps and accessory fittings, enabling custom configurations for assembly, soldering, or component inspection. The combination of large extension range and massive crossbar allows heavier optics or lighting modules to be positioned precisely where required, reducing the need for repositioning the workpiece. Built for workshops and precision environments Engineered for repeated daily use, the support frame combines a rugged construction with practical dimensions that suit bench-top setups. The heavy-duty construction is ideal for production testing, quality control and detailed assembly tasks where a reliable stereo microscope mounting solution is required. The stand’s compact footprint and measured outreach balance access and stiffness, making it a pragmatic choice for inspection stations that demand reproducible results. Contact Metav Werkzeuge today for application guidance or to secure the Universal stand U3 from the Metav IndustryLine range; our Emmerich team provides expert advice and fast dispatch to European workshops Technical Data Article number: M503.236 GTIN: 4054469145099 Type: U3 Category: Optik Customs tariff number: 90119090 Facts Arm length: 545 mm Column: Ø37×475 mm Base dimensions: 254×254×40 mm Mounting bore: 25 mm Special features Cast-iron table Large extension range Massive crossbar For stereo microscopes FAQ What microscope fittings are compatible with this stand? The Universal stand U3 accepts standard fittings via a 25 mm mounting bore and is suitable for most stereo microscope clamps and accessory posts. How does the base support affect measurement stability? The cast-iron base (254×254×40 mm) provides damping and rigidity, ensuring stable positioning and reducing vibration during inspection and assembly tasks. Can heavy illumination or camera modules be mounted on the arm? Yes, the 545 mm arm combined with a massive crossbar is designed to carry heavier accessories while maintaining secure and precise positioning. What is the product code for ordering and identification? Order reference: M503.236 (GTIN 4054469145099); listed under Metav IndustryLine as type U3. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise optical scaling, secure 58 mm mounting and straightforward compatibility with the MZPS 0850 stereo microscope to speed up visual inspection and assembly tasks. Order the auxiliary lens directly via Metav Werkzeuge or consult our specialists for fitment advice. Auxiliary lens M503.243.1 — 0.5× attachment for MZPS 0850 (Metav IndustryLine) The auxiliary lens provides a 0.5× reduction to expand the usable field for stereo microscopy, intended for overview inspection and assembly tasks on the MZPS 0850. 0.5× magnification adapter 58 mm thread diameter Compatible with stereo microscope MZPS 0850 Enlarged field of view for inspection Greater coverage for faster inspection cycles Fitting a 0.5× attachment effectively doubles the observable area compared with higher-magnification settings, allowing quicker assessment of assemblies and larger components. The optical reduction increases the field of view while preserving the stereo effect, which translates into fewer repositionings and a measurable productivity gain during repetitive quality checks. For applications where rapid visual overview is the priority, this adaptation reduces cycle times without changing the primary objective lenses. Secure mounting that keeps images consistent The adapter is engineered for a 58 mm thread interface that matches standard microscope accessory fittings, ensuring repeatable alignment and stable attachment on the microscope head. A defined mechanical interface reduces drift and rotation, so operators benefit from consistent framing and minimal re‑focusing. This steadiness supports predictable inspection outcomes and a lower rate of rework, particularly helpful in small-batch production and lab environments where reproducible imaging is essential. Practical integration into existing inspection workflows As an accessory for the MZPS 0850 stereo system, the lens integrates into existing setups with minimal disruption, enabling teams to switch between overview and detail inspection without swapping primary objectives. The straightforward nature of the accessory supports lean workflows in assembly, incoming goods inspection and routine quality control. Supply from a dedicated provider also means clear traceability for procurement and planning, aiding inventory control in workshop and laboratory contexts. Contact Metav Werkzeuge today to confirm compatibility and secure the Metav IndustryLine auxiliary lens M503.243.1 for immediate integration into inspection processes—email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance. Technical data Article number: M503.243.1 GTIN: 4054469145235 Tariff code: 90119090 Manufacturer: Metav IndustryLine Category: Optics Facts Magnification: 0.5× Thread diameter: 58 mm Compatibility: Stereo microscope MZPS 0850 SKU: M503.243.1 Special features Attachment lens for stereo microscope use Enlarges usable field of view for overview inspection Image asset available (m5032431-main.jpg) Intended for visual inspection and assembly tasks FAQ How much does the auxiliary lens change magnification? The adapter provides a 0.5× optical reduction, so the apparent magnification is halved compared with the instrument’s standard setting when the accessory is fitted. Will the lens fit my MZPS 0850 stereo microscope? Yes, the accessory is specified for use with the MZPS 0850 and uses a 58 mm thread to secure to the microscope’s accessory mount. Does the lens affect depth perception or stereoscopy? The accessory maintains the stereo pair effect while widening the field; depth perception is preserved, making it suitable for inspection tasks that still require three‑dimensional cues. Is any special calibration required after fitting the lens? No special calibration is typically required beyond standard optical alignment checks; the mechanical thread ensures reproducible mounting and consistent framing. Can this accessory be used for documentation photography? The broader field of view is advantageous for overview images; compatibility with camera documentation depends on the specific camera adapter and microscope configuration being used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact platform with a removable black/white stage plate Ø 60 mm for improved specimen contrast and straightforward integration into stereomicroscope workflows; practical for education and workshop inspection tasks. Order the microscope stage directly via Metav Werkzeuge or ask our consultants if needed. EduBlue ED.9956 microscope stage – removable black/white stage plate Ø 60 mm The microscope stage EduBlue ED.9956 is a compact accessory for stereomicroscopes, designed to provide simple contrast control and a stable platform for small specimens. Compatible with stereomicroscopes Removable black/white stage plate Ø 60 mm Compact, low-profile mounting SKU ED.9956 for straightforward ordering Improved contrast for clearer inspection and documentation The removable black/white stage plate with a diameter of Ø 60 mm enables rapid background changes to enhance contrast during visual inspection or photography. By switching between the black and white surfaces, the platform aids in distinguishing fine edges and translucent specimens that would otherwise blend into a single tone. This practical contrast control reduces the need for complex illumination adjustments and helps standardise visual results across multiple observations, supporting reliable comparisons in teaching and routine quality checks. Seamless integration into stereomicroscope workflows Designed for use with stereomicroscopes, the low-profile platform keeps the specimen close to the objective while preserving working distance and manoeuvrability. The stage's simple mounting and the readily removable plate allow quick adaptation between tasks, which is particularly useful in educational settings and busy workshops where different samples are inspected in sequence. Compatibility with the EduBlue documentation references (AP-1 and AP-2) ensures that the EduBlue series remains consistent across accessories and replacement parts, simplifying inventory and tool management. Practical handling and durable everyday use The stage is intended as a practical solution for repetitive inspection tasks: the removable plate simplifies cleaning and sample exchange, while the compact footprint keeps bench space free for other instruments. As part of the EduBlue family from Euromex, this accessory supports standard classroom and workshop procedures without adding unnecessary complexity. The straightforward design makes it easy to train staff and students on consistent sample presentation, improving throughput and reducing handling errors in routine microscopy work. Contact Metav Werkzeuge today for tailored advice on the Euromex EduBlue ED.9956 microscope stage and its compatibility with existing stereomicroscope setups; call +49 2822 7131930 or email info@metav-werkzeuge.com for information on availability and delivery from Emmerich Technical Data Article number: ED.9956 Manufacturer: Euromex Model series: EduBlue Product type: Microscope stage SKU: ED.9956 Facts Stage plate diameter: Ø 60 mm Special features Black/white stage plate Ø 60 mm (AP-1 and AP-2) Removable stage plate For stereomicroscopes Part of EduBlue series FAQ Is the stage compatible with stereomicroscopes? The stage is designed for use with stereomicroscopes; the EduBlue ED.9956 platform and its black/white stage plate Ø 60 mm suit typical stereo inspection tasks. Can the black/white plate be removed for cleaning? Yes, the black/white stage plate is removable, allowing easy cleaning and quick swapping between backgrounds for consistent contrast. What benefit does the Ø 60 mm plate offer? A Ø 60 mm plate provides a compact working area that supports small specimens while enabling rapid background changes to enhance visibility and documentation. Where is the product series mentioned in documentation? The EduBlue series references the black/white stage plate as AP-1 and AP-2 in the relevant EduBlue documentation; the ED.9956 is listed under that accessory group. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkezeuge.com

Benefit from a compact Ø 60 mm format and contrasting black/white surfaces that simplify specimen presentation; combine these features for reliable visual assessment in routine microscopy workflows and order the set directly via Metav Werkzeuge or consult the company's specialists for technical guidance. Pair of Stage Plates Ø 60 mm SB.9956 — Black/white plates for stereomicroscopes by Euromex Pair of Stage Plates Ø 60 mm SB.9956 offers contrasting stage inserts to improve sample visibility under stereo inspection, optimised for small specimens and routine laboratory workflows Pair of black and white plates Diameter 60 mm For stereomicroscopes Better contrast for faster visual assessment The set provides a clear visual distinction between dark and light backgrounds, enhancing the detection of edges, contours and small details. The contrasting black and white surfaces reduce preparation time by making specimens stand out immediately against the stage. For technicians who perform repetitive visual inspections, this contrast translates into more consistent observations and fewer repositions of samples. The design supports quick switching between backgrounds without the need for additional accessories, helping to maintain a smooth workflow in busy labs. Compact format that suits small specimens and tight setups With a precise Ø 60 mm diameter, these stage inserts are compact enough for confined stage areas yet large enough for many common sample types used in stereo observation. The small footprint makes the plates suitable where stage space is at a premium or when multiple accessories share the microscope stage. The modest size also simplifies alignment and centring of specimens, which contributes to faster set-up times and reduced handling — particularly useful in quality-control benches and educational workstations. Ready compatibility with stereomicroscopy workflows Designed for use with stereomicroscopes, the pair of inserts supports routine inspection tasks where illumination and perspective differ from compound microscopy. The contrasting backgrounds assist in both top-light and side-light arrangements by improving perceived depth and outline clarity. This set is particularly helpful when working with irregularly shaped or reflective samples, since the two-colour option enables selection of the background that offers the best visual separation for the material being inspected. Request technical advice or place an order through Metav Werkzeuge to ensure seamless integration of these Euromex stage plates into the existing microscopy setup — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SB.9956 SKU: SB.9956 Manufacturer: Euromex Product type: Microscope stage Label: Paar Objekttisch-Platten (schwarz/weiß) Ø 60 mm SB.9956 Dimensions / Measurables Diameter: 60 mm Design & Compatibility Pair of black and white plates For stereomicroscopes Contrast-enhancing stage inserts FAQ What is the exact diameter of these stage plates? The Euromex pair of stage plates SB.9956 has a diameter of 60 mm. Are these inserts suitable for stereomicroscopes? Yes, the SB.9956 stage plates are designed for use with stereomicroscopes and support common reflected-light inspection setups. How do the black and white plates improve observation? The contrasting black and white surfaces in the Euromex SB.9956 set enhance edge detection and improve sample visibility, reducing handling and speeding up routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a frosted glass surface combined with a compact Ø 60 mm diameter and straightforward compatibility for efficient sample handling and reliable visual contrast. Order the EduBlue ED.9950 stage plate directly via Metav Werkzeuge or contact our consultants for tailored advice. EduBlue ED.9950 microscope stage plate — frosted glass, Ø 60 mm, for stereomicroscopes (Euromex) EduBlue ED.9950 is a compact stage plate designed to improve specimen visibility and handling under stereomicroscopes in educational and light‑duty laboratory settings Frosted glass, opaque surface Ø 60 mm diameter Designed for stereomicroscopes Enhanced visibility through diffused illumination A frosted glass surface scatters incident light to reduce specular reflections and produce a more uniform background, which increases perceived contrast for small or translucent specimens. This translucent, opaque finish helps avoid distracting hotspots when using incident illumination or oblique lighting techniques common with stereomicroscopes, so users can focus on structural detail rather than glare. For teaching environments and routine inspections, the result is a more consistent image that supports rapid assessments and clearer demonstrations. Compact form factor that fits routine workflows The Ø 60 mm diameter makes the stage plate particularly suitable for small parts, slides and micro‑assemblies, optimising the usable workspace on standard stereomicroscope platforms. The modest footprint aids precise positioning of components and simplifies stage movements without obstructing the operator’s field of view. As a single‑element replacement or accessory, the plate integrates with existing stage clips or holders and supports straightforward exchange, contributing to minimal downtime during instrument preparation. Practical handling and maintenance advantages A glass stage plate is simple to clean and maintains stable optical properties over time, supporting reproducible results in repeated observations. The EduBlue ED.9950 stage plate requires only routine wiping to remove residues, and its surface resists rapid wear typical of softer materials. For classroom settings and light industrial use, this translates into lower maintenance overhead and dependable performance across multiple sessions, preserving image quality and reducing interruptions to teaching or inspection tasks. Contact Metav Werkzeuge today to discuss compatibility details or to arrange supply of the EduBlue ED.9950 stage plate; Metav’s consultants can advise on integration with specific stereomicroscope models and delivery options from Emmerich. Technical Data Article number: ED.9950 SKU: ED.9950 Brand: Euromex Model series: EduBlue Product type: Microscope stage plate Key measurements Diameter: 60 mm Surface: Frosted glass, opaque Compatibility and application For stereomicroscopes Intended for small specimens and educational use Easy to clean surface FAQ What lighting benefits does a frosted stage plate offer? A frosted glass plate diffuses light to reduce glare and hotspots; the EduBlue ED.9950 stage plate improves background uniformity and perceived contrast when inspecting specimens under a stereomicroscope. Will this stage plate fit any stereomicroscope stage? The EduBlue ED.9950 is sized at Ø 60 mm for compact applications and is designed for standard stereomicroscope setups; verify stage clip or holder dimensions before installation for secure mounting. How should the stage plate be maintained? Clean the frosted glass surface with a lint‑free cloth and suitable, non‑abrasive cleaner; routine wiping preserves the optical texture and prolongs consistent imaging with the EduBlue ED.9950. Is the plate suitable for both incident and transmitted illumination? Yes; the opaque, frosted finish is primarily beneficial for incident lighting scenarios common with stereomicroscopes, enhancing contrast for reflective and translucent specimens. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, transparent work surface that combines clarity and robustness for precise specimen inspection; the Ø 60 mm plexiglass design fits small stereomicroscope setups and is straightforward to maintain. Order or request advice via Metav Werkzeuge for fast supply and technical guidance. Transparent Plexiglass Stage Ø 60 mm — Euromex SB.9952 The Transparent Plexiglass Stage Ø 60 mm SB.9952 that serves as a compact, clear tabletop for stereomicroscopes, enabling dependable sample support in laboratory, educational and workshop environments Transparent plexiglass for clear sample view Diameter Ø 60 mm for compact installations Compatible with stereomicroscopes Easy to clean, lightweight and durable Clear visual access for precise inspection The transparent construction delivers unobstructed sightlines to small specimens, making fine adjustment and observation simpler under a stereomicroscope. As a lightweight plexiglass disc, the stage minimises reflections and provides a neutral background that assists in contrast management when inspecting delicate parts or biological samples. The compact format is particularly suited to benches with limited space, where a small, reliable viewing area supports repeatable positioning and efficient workflow. Robust material choice for everyday use Crafted from acrylic, the tabletop combines impact resistance with consistent optical clarity, reducing breakage risk compared with thin glass alternatives. The Ø 60 mm diameter offers a stable platform for small mounts and Petri dishes while remaining simple to handle and replace if required. This functional design supports frequent use in teaching labs and routine quality checks, where endurance and predictable behaviour under lighting are key factors in maintaining measurement and inspection routines. Low-maintenance handling and safe cleaning The smooth surface of the acrylic stage allows straightforward maintenance: routine cleaning removes dust and residues without specialised agents. Its easy to clean nature helps preserve optical quality and reduces downtime between sessions. The lightweight construction facilitates rapid exchange for different optical setups and minimises strain during repeated adjustments, contributing to a more efficient inspection cycle in multi-shift or classroom environments. Versatile fit for microscopes and workflows Designed specifically for use with stereomicroscopes, the disc is compatible with a range of stands and illumination arrangements commonly used in workshops and laboratories. The modest footprint makes it a practical choice for experimental rigs, educational benches and component inspection stations that require a compact clear stage. The combination of clarity, durable material and simple geometry supports consistent visual results and easier integration into existing setups. For product advice and reliable supply of the Euromex Transparent Plexiglass Stage (SB.9952), contact Metav Werkzeuge in Emmerich for tailored recommendations and prompt delivery at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: SB.9952 SKU: SB.9952 Brand: Euromex Product type: Microscope stage Material: Transparent Plexiglas (acrylic) Dimensions / Measurable data Diameter: Ø 60 mm Features / Applications Intended for: stereomicroscopes Form: round transparent tabletop Suitable environments: laboratory, education, workshop FAQ Is this stage suitable for all stereomicroscopes? The Transparent Plexiglass Stage Ø 60 mm SB.9952 by Euromex is intended for use with stereomicroscopes that accommodate a compact round stage; compatibility depends on the instrument's stage mount and working distance. How should the plexiglass tabletop be cleaned? Clean the Euromex tabletop with a soft cloth and mild detergent; the acrylic material resists everyday contaminants and is designed for simple maintenance without abrasive cleaners. Can this stage be used with transmitted illumination? The transparent nature of the SB.9952 allows light to pass through for many transmitted illumination setups, subject to the specific lighting configuration of the stereomicroscope. Is the material scratch-resistant? The stage is made from durable acrylic, which offers improved impact resistance compared with thin glass; however, like all polymer surfaces it can be scratched and should be handled with care. What is the primary application for this tabletop? The Euromex SB.9952 is primarily intended as a compact, clear support for specimen observation on stereomicroscopes in educational, laboratory and light workshop settings. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of uniform fluorescence illumination and low power consumption for consistent inspection results; the compact design and straightforward attachment to common microscope heads support efficient workflows in quality control and documentation. Order the ring light directly via Metav Werkzeuge or consult our specialists for application advice. Ring Light M503.261 – Fluorescence ring light for stereo microscopes (Metav IndustryLine) The Ring Light M503.261 is a fluorescence illumination unit designed for stereo microscopes, providing daylight-balanced light for inspection, photography and routine visual measurement tasks. Fluorescence illumination at 6400 K Compact 220 V, 8 W power consumption Fits most common stereo microscope heads Lightweight design, 0.85 kg for simple handling Consistent, daylight-balanced illumination for reliable inspection The lighting unit provides 6400 K fluorescence output that approximates daylight, ensuring faithful colour rendition during visual inspections and photographic documentation. Uniform, shadow-minimising illumination reduces the need for repeated repositioning of parts and aids camera-based capture, which supports reproducible results in quality assurance. The combination of even light distribution and fluorescence technology helps to reveal surface details on components and assemblies without introducing harsh reflections. Low power and low heat for prolonged operation With a rated supply of 220 V and only 8 W power consumption, the lamp offers an energy-efficient solution for extended use under microscopes. The low thermal output minimises heat transfer to sensitive samples and reduces thermal drift during long measurement or imaging sessions, which is particularly important in precision inspection and metrology environments. The energy-efficient design also supports continuous operation in production‑adjacent inspection stations without significant additional cooling requirements. Fast mounting and compact handling to speed workflows The unit is engineered for quick attachment to the majority of stereo microscope heads, facilitating rapid setup and tool changes on the shop floor or in the laboratory. A compact mounting interface with a nominal 62.5 mm recording facilitates adaptability across optical systems, while the 0.85 kg weight keeps the assembly light enough for easy manoeuvring. These attributes contribute to shorter throughput times for visual checks and make the lamp suitable for bench inspectors and documentation technicians. Practical durability and broad application range Designed for routine industrial use, the lighting solution combines robust construction with practical features that suit inspection, assembly control and documentation tasks in optics, electronics and precision engineering. The fluorescence source produces stable illumination over time, reducing variation between measurement sessions. Its compatibility with standard stereo microscope configurations makes it a versatile addition to metrology benches, incoming inspection stations and R&D workspaces where consistent visual assessment is required. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine Ring Light M503.261 can be integrated into existing inspection setups and to receive tailored delivery from our Emmerich site. Technical Data Article number: M503.261 SKU: M503.261 GTIN: 4054469145402 eClass: 22105204 Tariff number: 90119090 Category: Optik Facts Weight: 0.85 kg Power: 220 V, 8 W Colour temperature: 6400 K Mounting diameter: 62.5 mm Special features Fluorescence illumination Easy to attach to common microscope heads Suitable for stereo microscopes Compact, lightweight design FAQ Is the ring light compatible with all stereo microscope models? Compatibility depends on the microscope head and the mounting interface; the Ring Light M503.261 is designed to fit most common stereo microscope heads via a 62.5 mm mounting, but verification against the specific microscope model is recommended. What colour temperature does the illumination provide and why does it matter? The lamp emits 6400 K fluorescence light, a daylight‑balanced output that improves colour accuracy during visual inspection and photographic documentation, which is important for reliable quality assessment. How much power does the lamp use and is it suitable for long inspections? Rated at 220 V and 8 W, the unit is energy-efficient with low heat generation, making it suitable for prolonged inspection and imaging sessions without significant thermal impact on samples. Can the light be used for photography with a microscope camera? Yes, the uniform fluorescence illumination and reduced shadowing are well suited for microscope photography and camera-based documentation workflows. What are the typical application areas for this ring light? Typical uses include visual inspection, quality control documentation, electronic component inspection and laboratory sample observation where even, daylight-balanced illumination is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of a cast‑iron base, large extension range and a massive crossbar that ensure stable, vibration‑resistant support for stereo microscope tasks; the robust design improves repeatability and protects optical investments. Order the mount directly via Metav Werkzeuge or contact our consultants for specification guidance. Mount for Universal Stereo Microscope SF1 — large extension range, massive crossbar (Metav IndustryLine) Mount for Universal Stereo Microscope SF1 offers a stable, extendable solution for workshop and laboratory inspection where precise positioning and low vibration are essential Large extension range for versatile positioning Massive crossbar for vibration‑resistant stability Cast‑iron base for low centre of gravity Designed for universal stereo microscope stands Stability that keeps inspections repeatable A heavy cast‑iron base combined with a massive crossbar gives this mounting assembly outstanding resistance to external disturbances. The low centre of gravity and substantial construction reduce micro‑vibration during magnified inspection and assembly operations, improving the consistency of visual checks and manual work under a stereo microscope. The robust support also helps to extend the lifetime of delicate optics by preventing shock and movement; this leads to fewer readjustments and faster inspection cycles, which is particularly valuable in routine quality‑control workflows. Reach and flexibility for diverse inspection tasks The defining large extension range permits flexible positioning of the microscope head without compromising rigidity. The SF1 configuration enables smooth lateral and vertical alignment for assemblies, circuit boards and small mechanical components, making the mounting head suitable for benchtop inspection, repair and optical measurement. The design is compatible with universal stands and facilitates rapid re‑positioning between workstations, reducing setup time and increasing throughput in mixed‑task environments. Workshop durability and straightforward integration Manufactured with a cast‑iron table, the mount is built for workshop conditions where stability and durability matter. The unit is easy to interface with common stand fittings and is designed for long service intervals with minimal maintenance. The mounting head resists deformation and maintains alignment under regular handling, which benefits inspection repeatability and reduces downtime for recalibration. For procurement and inventory, the unit is supplied under Metav IndustryLine with a clear product identifier to simplify ordering and asset tracking. Contact Metav Werkzeuge today to discuss the SF1 mount with its cast‑iron base and extended reach; our team in Emmerich provides specification advice and reliable supply for workshop and laboratory needs Technical data Article number: M503.237 GTIN: 4054469145105 Type: SF1 eClass: 32130102 Tariff number: 90119090 Brand: Metav IndustryLine Material: cast‑iron table Facts Mounting reference: 76 SKU: M503.237 Category: Optik Special features Large extension range Massive crossbar Cast‑iron base Designed for universal stereo microscope stands FAQ Is the mount compatible with standard stereo microscope stands? The Mount for Universal Stereo Microscope SF1 is designed to interface with universal stands and common benchtop fixtures, providing flexible compatibility for many stereo microscope models. What are the main advantages for quality‑control work? Stable, repeatable positioning and a low‑vibration support structure improve inspection consistency and reduce the need for frequent optical realignment when using the SF1 mounting head. What material is used for the base and why does it matter? The base is a heavy cast‑iron table; this material lowers the centre of gravity and increases rigidity, which helps to dampen vibrations and maintain alignment during detailed inspection tasks. Can the mount support extended reaches without loss of stability? Yes, the combination of a large extension range and a massive crossbar ensures extended positioning while retaining vibration resistance and positional stability. How is the product identified for ordering and stock management? The unit is listed under Metav IndustryLine with the article number M503.237 and GTIN 4054469145105 for straightforward procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact 76 × 50 mm travel and the Ø95 mm through-hole to speed up optical inspection and maximise access to illumination paths; order the positioning stage directly via Metav Werkzeuge or contact the consultants for integration advice. Positioning stage S7650 — 76 × 50 mm travel, Ø95 mm through-hole (Metav IndustryLine) A precision positioning stage designed for optical inspection and fine X–Y alignment, ideal for use with a stereo microscope in laboratory or shop environments. Compact X–Y travel 76 × 50 mm Through-hole Ø95 mm for optical access Smooth, backlash-minimised movement Compatible with stereo microscopes Precise, measurable movement for optical work The compact stage provides 76 × 50 mm of controlled X–Y travel, offering a measurable basis for repeatable positioning tasks. The short travel range keeps the carriage stiff, which reduces flex and improves reproducibility during inspection or adjustment. Engineered for consistent motion, the table supports fine alignment where precision matters: centring, component inspection and photographic documentation all benefit from the stage’s stable kinematics. The result is a reduction in rework and faster throughput in routine optical procedures. Built-in access for illumination and imaging A central Ø95 mm through-hole gives unobstructed access for transmitted light, fibre-optic guides or camera lenses, simplifying setups that require illumination from beneath the sample. This feature removes the need for awkward external jigs and allows a compact optical column to be mounted directly underneath, improving workflow and ergonomics. The clear optical path also facilitates integration with inspection cameras and ensures that observation or imaging systems remain aligned with the workpiece during X–Y adjustments. Engineered for reliable workshop use and easy integration Constructed for stable, low-play operation, the stage supports repeated adjustments without losing alignment, which is essential in both routine inspection and R&D tasks. The solid construction and smooth guidance deliver a tactile sense of control that speeds up fine positioning. As part of the Metav IndustryLine, the S7650 benefits from stringent quality checks carried out at the Emmerich facility, reflecting Metav’s commitment to democratising precision and supplying dependable components to industry and trade. This reliability translates into fewer interruptions on the workbench and more predictable inspection outcomes. Contact Metav Werkzeuge for configuration support or advice on integrating the S7650 into an optical inspection station — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M503.263 GTIN: 4054469145426 Type: S7650 Category: Optik Brand: Metav IndustryLine Tariff code: 90119090 Facts Travel X × Y: 76 × 50 mm Through-hole diameter: Ø95 mm Special features Suitable for stereo microscopes Central aperture for transmitted light and camera access Compact footprint for benchtop use FAQ Is this stage suitable for use under a stereo microscope? Yes. The positioning stage S7650 from Metav IndustryLine is compatible with stereo microscopes and provides a compact X–Y platform for optical inspection and assembly tasks (SKU M503.263). What are the overall travel dimensions of the stage? The table offers X–Y travel of 76 × 50 mm, providing a balance between reach and stiffness for precise positioning work. Does the stage allow transmitted illumination or camera mounting? Yes. The integrated Ø95 mm through-hole allows transmitted light, fibre-optic guides or camera lenses to be used beneath the workpiece for inspection or imaging. How is the movement quality described? The stage features smooth, low-backlash guidance designed to keep repeatability high during fine adjustments; this reduces measurement scatter and improves inspection consistency. Can the stage be integrated into an existing inspection setup? Integration is straightforward thanks to the central aperture and compact footprint; for specific mounting suggestions or custom interfaces, consult Metav Werkzeuge for tailored advice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the simple contrast control and standard sizing of these stage plates to improve specimen visibility and routine workflow; the pair of black/white plates and their Ø 90 mm diameter provide flexible backgrounds for a range of samples. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Pair of stage plates (black/white), Ø 90 mm by Euromex — microscope stage plates for stereo microscopes The Pair of stage plates (black/white), Ø 90 mm is designed as a practical contrast solution for stereo microscopes, offering immediate background selection for opaque or translucent specimens. Black and white contrast plates Ø 90 mm for standard stages Pair for quick background switching Improved contrast for reliable inspection results The pair of stage plates delivers a straightforward way to control background contrast during routine inspection. The black surface helps to emphasise light-coloured, translucent samples, while the white side provides a neutral background for darker specimens. This contrast selection reduces the time spent adjusting illumination and visual filters, thereby increasing throughput in inspection tasks. The plates’ role is purely optical, so they complement existing illumination setups without altering microscope calibration. Simple compatibility with standard stereo microscope stages With a defined diameter of Ø 90 mm, these plates are intended for microscopes and stages that accept 90 mm inserts. The standard sizing simplifies integration into common stereo microscope workflows and ensures a snug fit in compatible stage openings. Because the product is a pair, it allows rapid switching between backgrounds during sample preparation or comparison tasks, supporting efficient step-by-step processes in laboratory or workshop environments. Practical guidance and procurement support For users uncertain about fit or suitability, the plates are a low-complexity accessory that typically requires no modification to the stage; they serve as an immediate contrast option for both novice and experienced operators. When additional technical details or compatibility checks are needed, Metav Werkzeuge provides assistance and can confirm whether the Euromex set matches specific stage systems. For further questions, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice. For reliable contrast solutions from Euromex, contact Metav Werkzeuge for expert advice and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9956 SKU: NZ.9956 Manufacturer: Euromex Product type: Microscope stage plates Facts Diameter: 90 mm Special features Pair of plates in black and white For stereo microscopes / stage inserts Provides background contrast for opaque and translucent specimens FAQ Are these plates suitable for stereo microscopes? The Euromex pair of stage plates is intended for use with stereo microscopes and fits stage openings compatible with a 90 mm diameter insert. How does the black/white pair improve inspection? Using the black and white sides of the plates enhances specimen contrast; the black side highlights light or translucent samples while the white side offers a neutral background for darker subjects when using the Euromex stage plates. Is any modification required to fit the plates? No modification is typically necessary; the Euromex plates are designed as stage inserts for stages accepting Ø 90 mm plates. Who to contact for confirmation of compatibility? For compatibility checks and procurement, Metav Werkzeuge provides technical advice and order support for the Euromex NZ.9956 stage plates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, well‑lit support that combines stable footing, an adjustable column and integrated LED incident and transmitted illumination to improve inspection throughput and reduce setup time; order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Stand SD2‑Dext — Microscope stand with integrated LED incident and transmitted illumination (Metav IndustryLine) Stand SD2‑Dext is a robust support designed for stereo microscope applications, offering a compact work surface and adjustable reach for assembly, inspection and laboratory tasks. Integrated LED incident and transmitted lighting Stable base 283 x 292 mm for vibration reduction Column Ø25 x 350 mm with 140 mm outreach 3 W LED lighting for consistent illumination Consistent lighting for repeatable inspection results The integrated LED incident and transmitted illumination delivers uniform, flicker‑free light that improves visual contrast and reduces operator fatigue during prolonged inspections. The 3 W LED module is energy efficient and produces stable colour rendering, enabling reliable visual assessment of components. Built‑in lighting removes the need for external lamps and simplifies the bench layout, which is particularly useful in production or quality‑control environments where consistent illumination directly affects judgement. Stable support that minimises vibration and improves handling A broad base measuring 283 x 292 mm provides a low centre of gravity and reduces vibrations during fine work, resulting in steadier images at higher magnifications. The dedicated work platform of 95 mm gives a compact yet practical area for small assemblies and measuring fixtures, while the mounting interface of 76 mm accommodates common objective holders. The solid construction allows precise positioning without compromising ease of operation, improving both speed and repeatability in routine tasks. Flexible reach and focusing for varied components The vertical column (Ø25 x 350 mm) combined with an outreach of 140 mm enables comfortable access to taller assemblies and awkwardly shaped parts without loss of stability. A focus range of 50 mm supports adjustments for part thickness and stereo microscope zoom changes, making the stand suitable for tasks from electronics inspection to small mechanical assemblies. The arrangement balances reach and stiffness to maintain measurement and inspection integrity across the working envelope. Designed for workshop and laboratory workflows This stand is intended as a practical bench solution for inspection, assembly and quality checks. The compact footprint and integrated lighting reduce setup time and free bench space for tooling or documentation. The construction and feature set make it appropriate for routine laboratory use, technical education, and industrial inspection where dependable illumination and mechanical stability are priorities. Contact Metav Werkzeuge for tailored application advice and to request the SD2‑Dext stand from Metav IndustryLine, including information on availability and delivery to your works. Technical data SKU: M503.233.1 GTIN: 4054469145051 Type: SD2‑Dext Brand: Metav IndustryLine Customs tariff: 90119090 Facts Work surface: 95 mm Mounting interface: 76 mm Outreach: 140 mm Focus range: 50 mm Base footprint: 283 x 292 mm Column: Ø25 x 350 mm LED power: 3 W Special features Integrated LED incident and transmitted illumination Compact platform for stereo microscope applications Robust, low‑vibration base Suitable for inspection, assembly and laboratory tasks SD2‑Dext model configuration FAQ What type of illumination does the stand provide? The stand delivers integrated LED incident and transmitted illumination; the SD2‑Dext from Metav IndustryLine uses a 3 W LED module to ensure consistent, flicker‑free lighting. Is the stand suitable for stereo microscope workbenches? Yes; the SD2‑Dext is a microscope stand designed specifically for stereo microscope applications and provides a compact work surface (95 mm) and a stable base (283 x 292 mm). What are the mounting and reach dimensions? Mounting interface 76 mm, column Ø25 x 350 mm and an outreach of 140 mm give flexible positioning for a range of sample sizes when using the SD2‑Dext (SKU M503.233.1). Can the stand be used for inspection of small electronic components? The combination of stable base, focused reach and uniform LED illumination makes the SD2‑Dext well suited to electronics inspection and similar fine tasks. How energy efficient is the lighting? The integrated lighting is a 3 W LED module, providing efficient, stable illumination appropriate for continuous use in production or laboratory settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of precise Abbe illumination, flexible contrast options and straightforward integration into existing systems for dependable microscopy results; order the condenser directly via Metav Werkzeuge or consult our advisors for technical matching. bScope BS.9102 condenser — Abbe 1.25 NA with darkfield & phase slot (Euromex) The bScope BS.9102 condenser is an Abbe-style condenser designed to deliver high-contrast transmitted-light illumination with a 1.25 numerical aperture, featuring a dedicated slot for darkfield and phase contrast sliders. Abbe condenser with 1.25 numerical aperture Slot for darkfield and phase contrast sliders Compatible with bScope series microscopes Precision optical alignment for consistent contrast Optimised illumination for improved detail and contrast The Abbe condenser specification with 1.25 NA provides a solid basis for precise transmitted-light microscopy: a higher numerical aperture enables improved light-gathering and contributes to enhanced resolution and image contrast when paired with suitable objectives. For routine laboratory work and educational settings, the optical design supports repeatable results and clearer differentiation of specimen structures, reducing time spent on illumination adjustment and increasing throughput at the bench. Flexible contrast techniques for a wider range of samples Built with a slot for darkfield and phase contrast sliders, this condenser permits rapid switching between contrast methods without complex reconfiguration. Darkfield illumination is suited to the visualisation of small, unstained particles, while phase contrast emphasises transparent cellular structures. The slider arrangement keeps accessories accessible and changeable on the fly, so different sample types can be examined efficiently without compromising alignment or focus. Robust compatibility and precise alignment for system integration Engineered for integration with the bScope series, the condenser offers reliable compatibility and straightforward mechanical fitting to standard transmitted-light microscopes of the same line. The optical path is configured for consistent optical alignment, which helps maintain uniform illumination across sessions and users. The compact design is suitable for teaching labs, routine inspection benches and light microscopy workflows where stable, repeatable illumination is required. Practical support and further technical resources Technical documentation identifies the unit as an Abbe condenser with a 1.25 NA and slider accommodation for contrast accessories; additional information is available on request for exact mounting and compatibility with specific objectives or illumination setups. For supplementary technical data or guidance on matching the condenser to objectives and methods, Metav Werkzeuge provides direct support and can supply clarifications or copies of the referenced education materials. For a reliable Abbe illumination solution choose the Euromex bScope BS.9102 condenser — contact Metav Werkzeuge in Emmerich for ordering advice or technical matching at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BS.9102 SKU: BS.9102 Model series: bScope Product type: Condenser Manufacturer: Euromex Key numerical data Numerical aperture: 1.25 NA Special features Abbe condenser design Slot for darkfield and phase contrast sliders Compatible with bScope series microscopes Source: Education PDF S.21; Life Science PDF S.9,39 FAQ What numerical aperture does the condenser provide? The Euromex bScope BS.9102 condenser provides an NA of 1.25 NA, which supports higher-resolution transmitted-light imaging and improved contrast with compatible objectives. Can this condenser be used for darkfield and phase contrast techniques? Yes, the condenser includes a dedicated slot for darkfield and phase contrast sliders, allowing rapid switching between these contrast methods. Which microscopes is the condenser compatible with? The condenser is designed for the bScope series and offers mechanical and optical compatibility with microscopes from that range; verify objective and mount compatibility for specific models. How does the Abbe design affect image quality? An Abbe condenser concentrates and directs light to optimise specimen illumination; with the 1.25 NA, it helps to achieve uniform, high-contrast transmitted-light images when matched to appropriate objectives. Where can further technical documentation be obtained? Further documentation and references cited for the condenser are available; consult the education and life science PDFs mentioned in the technical data or request details from Metav Werkzeuge. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the Standard Abbe condenser design and precise optical alignment for consistent illumination, combined with straightforward integration into Achios‑X Observer stands. The result is dependable image quality for routine microscopy; order the condenser directly via Metav Werkzeuge or ask our consultants if needed. Euromex Achios‑X Observer AX.9100 condenser — Standard Abbe condenser for routine microscopy Euromex Achios‑X Observer AX.9100 condenser is a compact standard Abbe condenser engineered for reliable illumination control and compatibility with the Achios‑X Observer series, offering a pragmatic upgrade to existing optical setups. Standard Abbe condenser design Fits Achios‑X Observer series Robust build for routine microscopy Simple integration into optical path Consistent illumination for reliable results The Abbe condenser concept used in this unit provides a well-established approach to concentrate light at the specimen plane, improving contrast and resolution for transmitted‑light techniques. Because the design focuses on controlled illumination rather than complex optics, the condenser delivers reproducible light distribution across routine samples. This makes it particularly suitable for microscopy tasks where dependable, repeatable lighting is more valuable than variable speciality functions. Easy installation and optical alignment Designed to match the Achios‑X Observer family, the condenser allows straightforward mechanical and optical integration into an existing stand. The simple mounting reduces downtime and simplifies optical alignment, so the unit can be brought into service quickly. For workshops and teaching labs that require minimal configuration effort, the practical design translates into faster setup and fewer interruptions to workflow. Practical choice for labs and educational use For laboratories, schools and small analytical facilities seeking a reliable illumination component, this condenser balances precision with pragmatic operation. The unit supports standard transmitted‑light workflows and complements basic to intermediate microscopy tasks without introducing unnecessary complexity. It is a compact, effective optical accessory that focuses on core performance where dependable light control is required. For a pragmatic optical upgrade, choose the Euromex Achios‑X Observer AX.9100 condenser and contact Metav Werkzeuge in Emmerich for technical guidance and swift supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AX.9100 Manufacturer: Euromex Model series: Achios‑X Observer Product type: condenser SKU: AX.9100 Facts No numerical specifications provided Special features Standard Abbe condenser Category: Microscopy accessories · Others · Condensers Label: Condenser Achios‑X Observer AX.9100 FAQ What optical principle does this condenser use? The unit is a Standard Abbe condenser, providing concentrated transmitted light to improve contrast and support routine imaging tasks with the Euromex Achios‑X Observer AX.9100 condenser. Is the condenser compatible with the Achios‑X Observer stands? Yes, compatibility with the Achios‑X Observer series is indicated by the model series designation, allowing straightforward integration into matching Euromex observation stands. Can this condenser be used for teaching and routine lab work? The condenser is designed for routine microscopy and educational environments, offering robust performance and simple alignment that fit classroom and workshop requirements. How does the condenser affect image quality? By concentrating illumination and enabling consistent light distribution, the condenser enhances specimen contrast and supports clearer transmitted‑light observation with everyday samples. Is there any numerical specification available for optical aperture or dimensions? No numerical specifications were provided for aperture or physical dimensions in the available data for the AX.9100 unit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of direct Canon SLR compatibility and secure trinocular attachment to streamline microscopy documentation; the PT02-Canon adapter ensures reliable mechanical coupling and traceable identification for workshop procurement. Order the adapter directly via Metav Werkzeuge or consult the Metav team for compatibility checks. Adapter PT02-Canon – Trinocular microscope to Canon SLR connection (Metav IndustryLine) Adapter PT02-Canon is a mechanical interface that links a trinocular stereo microscope head to a Canon digital SLR camera, enabling photographic documentation and image capture for inspection and archiving. Compatible with Canon SLR cameras For trinocular stereo microscopes Model PT02-Canon, SKU M503.254.1 GTIN 4054469145358 for traceability Reliable imaging and reproducible documentation The adapter provides a stable mechanical coupling between a trinocular stereo microscope and a Canon SLR, preserving the optical axis and minimising image displacement during capture. This physical connection supports consistent framing and exposure when photographing specimens, which is essential for quality assurance, traceability and process documentation. The solid coupling reduces the risk of accidental misalignment during routine imaging tasks, improving the repeatability of recorded views without altering the microscope's optical train. Practical fit and straightforward integration into workflows Designed for straightforward assembly with a trinocular head, the accessory secures the camera so that photographic work becomes an integrated part of the inspection workflow. The interface eliminates improvised fixes and provides a defined mechanical join for mounting, which benefits laboratories and workshops that require fast, repeatable capture of magnified parts or samples. By standardising the camera attachment, the adapter helps accelerate documentation tasks and reduces setup time between successive imaging sessions. Traceability, identification and supply reliability Each unit is supplied with clear identifiers such as SKU M503.254.1 and GTIN 4054469145358, enabling inventory control and long-term traceability in procurement processes. As a Metav IndustryLine product, the accessory benefits from the supplier’s position as a European quality filter based in Emmerich, which supports dependable availability and consistent specification control for industrial users. The concise, purpose-built function of this interface focuses on secure camera attachment and reproducible image capture rather than adding optical modifications. Contact Metav Werkzeuge to confirm microscope compatibility and arrange supply of the PT02-Canon adapter; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M503.254.1 Type: PT02-Canon SKU: M503.254.1 GTIN: 4054469145358 Tariff number: 90119090 Numbers / Core Technical Data GTIN: 4054469145358 Tariff number: 90119090 Special features Connection: Canon Intended use: Adapter for digital SLR camera, Canon Application: Connection of stereo microscope with trinocular head to digital camera Category: Optik Manufacturer: Metav IndustryLine Image: m5032541-main.jpg FAQ Which cameras are compatible with this adapter? The adapter is compatible with Canon SLR cameras; the PT02-Canon provides the mechanical interface required to mount a Canon digital SLR to a trinocular stereo microscope. Can the adapter be used with any trinocular stereo microscope? The PT02-Canon is intended for microscopes fitted with a trinocular head; physical match to the microscope’s camera port should be verified prior to installation to ensure a secure fit. Does the accessory include a camera or optical inserts? The product is a mechanical adapter only; it does not include a camera or additional optical elements and is supplied as the mounting interface for imaging. How is the product identified for procurement and traceability? Identification is provided by SKU M503.254.1 and GTIN 4054469145358, which support inventory control and ordering workflows. Who supplies the adapter and where does it originate? The product is supplied under the Metav IndustryLine brand and distributed via Metav Werkzeuge, which manages European supply and specification control Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Augenmuschelpaar

Take advantage of a darkfield oil‑immersion solution that enhances contrast for unstained samples while remaining compatible with the Achios‑X Observer series; order directly via Metav Werkzeuge or consult our specialists for further technical clarification. Achios‑X Observer AX.9112 Condenser by Euromex — Darkfield oil immersion Achios‑X Observer AX.9112 is a darkfield oil‑immersion condenser designed to increase contrast for delicate and unstained specimens in life‑science and materials microscopy. Darkfield oil‑immersion condenser Designed for Achios‑X Observer series Optimised for high‑contrast microscopy Sharper contrast for unstained and delicate samples The darkfield principle directs oblique illumination so that only scattered light from the specimen reaches the objective, producing a bright specimen against a dark background. In combination with oil immersion, this effect is intensified, which improves fine‑detail visibility for transparent or barely stained structures. For laboratories that analyse cells, fibres or particulate matter, the result is a reliable enhancement in contrast without additional staining steps, reducing preparation time while retaining specimen integrity. Engineered for integration within observation benches Built as part of the Achios‑X Observer family, Achios‑X Observer AX.9112 is intended for straightforward integration into compatible microscope stands. The condenser's design supports stable alignment and repeatable positioning, which contributes to reproducible imaging results across routine workflows. Specimen evaluation benefits from the stable optical path and the consistent illumination geometry, helping to reduce re‑calibration efforts between sessions. Practical handling and maintenance suited to busy laboratories Oil immersion requires careful handling and cleaning to preserve optical performance; the condenser is therefore compatible with standard laboratory cleaning procedures and common immersion oils. Routine maintenance keeps the optical surfaces clear and ensures long‑term performance, while the modular nature of the unit simplifies replacement or servicing. For supplementary technical data or specific compatibility checks with existing microscope configurations, Metav Werkzeuge provides detailed support and documentation; further technical queries can be directed to info@metav-werkzeuge.com or via telephone at +49 2822 7131930. Discuss integration and ordering options for Euromex condensers with Metav Werkzeuge; expert advice and procurement support are available from our Emmerich team. Technical data Article number: AX.9112 SKU: AX.9112 Manufacturer: Euromex Product type: Condenser Facts Application: Darkfield (oil immersion) Model series: Achios‑X Observer Category path: Mikroskopie‑Zubehör → Sonstiges → Kondensoren Special features Darkfield condenser (oil) Intended for life‑science and materials observation Compatible with Achios‑X Observer series FAQ What is a darkfield oil‑immersion condenser used for? A darkfield oil‑immersion condenser produces high contrast for transparent or unstained specimens; the Achios‑X Observer AX.9112 intensifies scattered light detection for improved visibility of fine structures. Can the Achios‑X Observer AX.9112 be used with standard immersion oils? Yes, the condenser is designed for oil‑immersion use and is compatible with standard immersion oils; adherence to recommended cleaning routines preserves optical performance. Which microscope series is this condenser compatible with? The condenser is designed for integration with the Achios‑X Observer series and aligns with the mechanical and optical interfaces typical for that platform. Does the unit require special maintenance after each use? Routine cleaning of immersion oil from optical surfaces is recommended after use; following standard laboratory cleaning procedures will maintain the condenser's performance and longevity. Is the Achios‑X Observer AX.9112 suitable for materials as well as biological samples? Yes, the darkfield oil approach is useful for certain materials applications where enhanced scattering contrast reveals surface features or particulates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com