Take advantage of robust hardened steel construction and DIN 7162 conformity to secure reproducible bore checks; the built‑in wear allowance on the good side extends service life and simplifies limit interpretation. Order the Filetta items via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge by Filetta — hardened steel, DIN 7162, Ø 12 mm, G7 Limit plug gauge designed for rapid acceptance checks of internal diameters in production and incoming‑goods inspection Hardened steel for durable measurement Conforms to DIN 7162 standard Wear allowance on the 'go' side Reliable diameter assessment that speeds inspection throughput The limit plug gauge serves as a straightforward go/no‑go check for cylindrical bores, offering rapid verification without complex setup. Machined to a nominal diameter of 12 mm with the designation G7, the pin provides an immediate pass/fail indication that reduces inspection time compared with full dimensional measuring chains. The hardened construction minimises deformation under repeated use, which keeps the checking routine stable and helps maintain production rhythm. For shop floors and control benches where speed and repeatability matter, the gauge translates metrological specification into a clear decision at the point of measurement. Durable design that reduces replacement and downtime Made from hardened steel, the gauge withstands frequent handling and contact with metal workpieces. A specific wear allowance on the good side compensates for gradual material loss, so the go end retains acceptance criteria longer and service intervals are extended. This pragmatic feature lowers life‑cycle costs by delaying the need for reworking or replacement and by keeping inspection standards consistent. The combination of robust material and wear management supports continuous operation in industrial environments where tools are subject to intensive use. Simple integration into quality processes and documentation Conforming to DIN 7162 assists traceability in formal inspection plans and quality records. The plug gauge is suitable for routine acceptance checks in production, final inspection and incoming goods control where clear binary results are preferred. The concise form factor and unambiguous results streamline operator training and reduce human decision variance, which improves overall process capability. When used as part of a calibrated inspection set, the gauge helps to demonstrate compliance and to maintain documented control over critical bore dimensions. Practical benefits for workshop and production use This gauge simplifies everyday metrology: no complex calibration rigs are required for routine use, and the hard wearing surface minimises surface damage to both gauge and workpiece. The compact geometry facilitates access to bores in assemblies and jigged components, while the standardised dimensioning and tolerance marking enable easy cross‑referencing with drawing specifications. For manufacturing teams seeking dependable, low‑effort tools for Go/No‑Go inspection, the pin combines industrial robustness with clear operational benefits. Choose the Filetta limit plug gauge with G7 tolerance via Metav Werkzeuge for dependable in‑process checks; contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS911.174 Product: Limit plug gauge Brand: Filetta Facts Nominal diameter: 12 mm Standard: DIN 7162 Designation: G7 Special features Material: hardened steel Wear allowance on the go side Intended for go/no‑go bore inspection FAQ What size bore is this gauge intended to check? The gauge is supplied as a 12 mm nominal limit plug gauge and is intended for quick go/no‑go checks of bores matching that nominal diameter. Is the gauge suitable for production use on a shop floor? Yes, the hardened‑steel construction and the wear allowance on the good side make the gauge robust enough for routine production and incoming‑goods inspection. How does the G7 designation influence measurement results? G7 is the designation provided with the article and identifies the tolerance fit intended for interpretation against corresponding drawing tolerances when using the plug gauge. Does the gauge comply with industry standards? The item is produced to conform with DIN 7162, facilitating inclusion in standard inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Combining hardened steel construction, conformity to DIN 7162 and a deliberate wear allowance on the good side delivers dependable limit checking and extended service life in routine inspection tasks; order Filetta limit gauge pins via Metav Werkzeuge or consult our specialists for selection and supply advice. Limit gauge pin by Filetta — hardened steel, DIN 7162 Limit gauge pin designed for Go/No‑Go checks in production and QA environments Limit gauge pin ø 17 mm, hardened steel Conforms to DIN 7162 tolerances Wear allowance on the good side Suitable for plug and pin gauge control Dependable limit checking that stabilises production quality The solid, dimensionally stable construction supports fast, repeatable inspections on the shop floor and in quality control. Built from hardened steel, this pin maintains its nominal size under cyclic use, which reduces the risk of false rejects and rework. Conformity to DIN 7162 provides an objective reference for acceptance testing and helps to harmonise checks across suppliers and production lines, improving throughput and lowering non‑conforming parts per million. Reduced downtime thanks to a wear‑compensated design The integrated wear allowance on the good side extends the usable life of each pin by allowing controlled material loss while preserving the accept signal for Go checks. For maintenance planners and inspectors this means fewer replacements and more predictable tool cycles. The design philosophy emphasises long‑term precision, so inspection intervals can be scheduled on condition rather than by conservative fixed replacement, saving operational time without compromising measurement integrity. Practical suitability for workshop and gauge sets Manufactured for routine limit inspection duties, the pin is compact and straightforward to integrate into existing gauge sets and fixtures. The simple geometry supports quick insertion for plug checks and is compatible with standard bench routines. For technical procurement and production engineering teams, the combination of material choice and standard compliance provides a reliable basis for procurement decisions and spares planning, while Metav Werkzeuge can advise on kit assembly and batch supply options. For specification support or stock availability of Filetta limit gauge pins (MS911.179) contact Metav Werkzeuge for a tailored recommendation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS911.179 Manufacturer: Filetta Size / Diameter: 17 mm Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on the good side Specifications Diameter: 17 mm Design & Features Category: limit gauge pin / plug gauge Intended use: Go/No‑Go limit checking and quality control Application area: production inspection, incoming goods control FAQ What is this pin used for in production? This limit gauge pin (Filetta, MS911.179) is used for Go/No‑Go checks and routine limit inspections to verify bore and fit dimensions on parts. Does the pin meet a recognised standard? Yes, the Filetta pin complies with DIN 7162, ensuring standardized tolerance classes for limit gauges. How does the wear allowance affect service life? The built‑in wear allowance on the good side prolongs usable life by permitting controlled wear while maintaining the Go limit, reducing replacement frequency. Can Metav Werkzeuge supply matching gauge sets or replacements? Metav Werkzeuge can advise on compatible gauge sets and supply quantities; the Filetta MS911.179 can be ordered as part of a coordinated inspection kit. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of precise, repeatable inspection in a compact format: robust hardened steel construction and compliance with DIN 7162 ensure reliable go/no‑go assessment and long service life; order the limit plug gauge directly via Metav Werkzeuge or request detailed specification support from our consultants. Limit plug gauge G7 (MS911.160) – hardened steel, DIN 7162 — Filetta Limit plug gauge G7 (MS911.160) for quick verification of bore tolerances in routine inspection and incoming goods control Hardened steel construction for longevity DIN 7162 compliant inspection gauge Wear allowance on the good side for service life Precision gauge pin, 2 mm nominal size Repeatable inspection that reduces rework and inspection time The limit plug gauge offers a straightforward method for verifying bore tolerances without complex measurement setups. Manufactured from hardened steel, the gauge provides consistent contact geometry and wear resistance; this translates into repeatable pass/fail checks at points of inspection, reducing the time spent on detailed measuring instruments and lowering the risk of unnecessary rework. Compliance with DIN 7162 ensures that acceptance criteria are clear and comparable across suppliers, supporting efficient quality control in production and incoming goods. Durable design with a built‑in allowance for wear A defining characteristic is the wear allowance on the good side, which compensates for gradual material loss during repeated use and maintains the defined acceptance margin for longer. The hardened substrate keeps the contact faces stable, so the gauge preserves its functional geometry under regular workshop conditions. For inspection routines where robustness and predictable service intervals matter, this design reduces downtime and the frequency of replacements, providing a reliable tool for standardised checks. Practical integration into workshop and inspection routines Designed as a simple go/no‑go instrument, the gauge is ideal for rapid checks on components during assembly, jig setting and final inspection. The compact format and clear acceptance principle make it suitable for bench use and for operators with basic training in metrology. Combined with a documented standard such as DIN 7162, the tool supports traceable inspection protocols and straightforward documentation in quality records, assisting both production staff and quality engineers in maintaining batch conformity. Discuss specification details with Metav Werkzeuge or request a technical comparison from our Emmerich hub — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS911.160 Material: hardened steel Standard: DIN 7162 Nominal size: 2 mm Special feature: wear allowance on the good side Facts Product type: limit plug gauge Brand: Filetta SKU: MS911.160 Special features Robust contact faces Suitable for go/no‑go checks Purpose: bore tolerance verification Compact inspection tool for workshop use FAQ What is the primary use of this limit plug gauge? The limit plug gauge MS911.160 by Filetta is used for rapid go/no‑go verification of internal bore tolerances during incoming inspection and production control. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened steel; this gives stable contact geometry and wear resistance, maintaining reliable inspection performance over repeated use. How does the wear allowance affect inspection intervals? The integrated wear allowance on the good side increases the effective service life by compensating for minor material loss, so maintenance and replacement intervals can be extended while preserving acceptance criteria. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of DIN 7162 conformity, hardened steel construction and the integrated wear allowance on the go side for dependable bore verification. Order this limit plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge G7 – 20 mm, hardened steel (DIN 7162) by Filetta A limit plug gauge G7 designed for rapid go/no-go checks of cylindrical bores in production and inspection environments Hardened steel for long service life Manufactured to DIN 7162 standard Wear allowance on the go side Suitable for bore verification and QC Reliable measurements through recognised standards The gauge is manufactured to DIN 7162, which ensures consistent dimensions and interchangeability across inspection routines. For a nominal size of 20 mm, the plug gauge provides an immediate go/no-go decision, eliminating lengthy measurement evaluation processes. This standard-led approach supports efficient quality control, reduces scrap rates and shortens inspection cycles by delivering clear, repeatable outcomes at every station. Durable construction that reduces downtime Made from hardened steel, the instrument tolerates repeated use on the shop floor while maintaining dimensional stability. The incorporated wear allowance on the go side compensates for gradual material loss during routine checking, extending the service life before any rework or replacement becomes necessary. This pragmatic design reduces unplanned stoppages and lowers total cost of ownership by keeping maintenance intervals predictable. Practical integration for workshop and production use Sized for common bore checks, the plug gauge is ideal for quick verification during assembly, final inspection or incoming goods control. Its straightforward go/no-go functionality accelerates throughput without requiring complex measuring equipment or extensive operator training. The robust design and adherence to DIN 7162 make it suitable for use in machine shops, tool rooms and quality laboratories where rapid, trustworthy pass/fail decisions are required. Reference: model MS911.182 for ordering and stock enquiries. Contact Metav Werkzeuge for expert advice on integrating Filetta limit plug gauges (DIN 7162) into existing inspection routines and to secure reliable supply from our Emmerich warehouse Technical Data Article number: MS911.182 Material: hardened steel Standard: DIN 7162 Size: 20 mm Facts Diameter: 20 mm Special features Wear allowance on the go side Designed for go/no-go checks Robust hardened-steel construction FAQ What is the primary use of this limit plug gauge? This limit plug gauge is intended for fast go/no-go verification of cylindrical bores, providing a clear pass/fail result for production and inspection tasks. What material is the gauge made from and why does it matter? The gauge is produced from hardened steel, which ensures wear resistance and dimensional stability under frequent use, supporting reliable long-term measurements. Which standard does the product comply with? Manufactured to DIN 7162, the gauge meets recognised dimensional and manufacturing criteria for plug gauges used in industrial quality control. How does the wear allowance affect inspection intervals? The wear allowance on the go side compensates for gradual abrasion, extending useful life and allowing longer intervals between gauge replacement or rework; the item is listed as MS911.182 for ordering and inventory reference. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

The combination of hardened steel construction, conformity with DIN 7162, and a clearly defined wear allowance on the good side ensures reliable, repeatable go/no-go verification and long service life; order this gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Limit gauge pin G7, 5 mm — Filetta Limit gauge pin for precision go/no-go checks and wear assessment in workshop and inspection environments. Hardened steel construction Conforms to DIN 7162 Wear allowance marked on good side Consistent pass/fail inspection for production routines The robust hardened steel body provides a stable reference surface that resists deformation under repeated use, supporting repeatable inspection results when used for go/no-go checks. Conformity with DIN 7162 gives a recognised benchmark for dimensional behaviour and interchangeability, so inspection processes can be standardised across machines and shifts. This reliability reduces rework, streamlines quality control and shortens inspection cycles in a busy workshop environment. Visible wear allowance aids maintenance planning A clearly indicated wear allowance on the good side makes it straightforward to monitor gauge condition and schedule replacements before limits are exceeded. The marked allowance functions as an operational guide for maintenance teams and enables conservative assessment of gauge life without complex measurement procedures. This feature supports predictable tool management, helping to avoid unexpected inspection failures and maintain traceable measurement practice. Compact form for fixtures and tight spaces With a nominal size of 5 mm, the pin is suited to tight-fixture applications and small-bore verification tasks common in jigs and measuring arrangements. The compact diameter enables use as a precision locating element or measuring pin where access is limited, while the hardened finish sustains surface integrity under frequent contact. As a limit gauge pin, it delivers a focused solution for dimensional control of small components and fit checks within assemblies. For precision go/no-go control rely on Filetta quality—contact Metav Werkzeuge for availability, technical advice and secure delivery to your workshop Technical data Article number: MS911.166 Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Measurements Nominal size: 5 mm Special features Wear allowance on the good side Category: measuring pins FAQ What is the intended use of this limit gauge pin? The limit gauge pin is designed for go/no-go verification and dimensional checks in workshop metrology; Filetta manufacture it to serve as a precise reference pin for small-bore and fit inspections. How does the wear allowance improve gauge management? A marked wear allowance on the good side provides a visual threshold for service life; when the allowance is reached the pin should be replaced to preserve measurement integrity. Is the product compliant with any standards? Yes, the pin complies with DIN 7162, ensuring standardised dimensional characteristics suitable for industrial inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Benefit from a hardened steel construction, DIN 7162 standard compliance and a wear‑compensated 'go' face for consistent inspection results; order through Metav Werkzeuge or request specialist advice for integration into quality workflows. Limit plug gauge, 7 mm — hardened steel, DIN 7162 (Filetta) A limit plug gauge designed for rapid verification of internal diameters in production and inspection environments, combining standard conformity with a wear‑compensated go face for sustained accuracy Hardened steel construction Conforms to DIN 7162 Precision 7 mm diameter Wear allowance on the go face Consistent inspection reliability for serial use The compact design supports routine checks where repeatability matters: the hardened construction and standardised geometry ensure that each measurement delivers the same reference result, reducing ambiguous outcomes on the shop floor. Used as a go/no‑go reference, this gauge streamlines acceptance steps and shortens inspection cycles, which helps to lower rework rates and maintain production throughput without additional setup time. Durable design that preserves accuracy over time A dedicated wear allowance on the go face protects the reference dimension and extends service intervals; the result is fewer replacements and more stable process capability. The hardened steel body resists deformation and abrasion in continuous use, so calibration intervals remain conservative and the tool sustains usable tolerances across many inspection cycles, supporting predictable maintenance planning. Simple integration into quality systems and traceable documentation Built to DIN 7162, the gauge fits established go/no‑go procedures and can be referenced directly in inspection plans. Its compact diameter of 7 mm makes it suitable for confined bores and tight features commonly encountered in precision components. Traceability is straightforward when the gauge is recorded in quality documentation, enabling clear pass/fail decisions during incoming, in‑process and final checks. Choose Filetta's hardened, DIN‑compliant limit plug gauge for robust, repeatable gauging and contact Metav Werkzeuge in Emmerich for tailored advice and ordering—email info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and supply coordination Technical Data Article number: MS911.211 Material: hardened steel Standard: DIN 7162 Diameter: 7 mm Facts Product type: Limit plug gauge Brand: Filetta Intended use: Internal diameter verification Special features Wear allowance on the go face Suitable for production and inspection gauging Compact geometry for confined bores FAQ What applications suit this limit plug gauge best? This limit plug gauge is intended for quick verification of internal diameters in production, incoming inspection and routine quality checks where a 7 mm reference is required. How does the wear allowance affect service life? The wear allowance on the go face preserves the reference dimension, so the gauge maintains usable accuracy longer and reduces the frequency of replacements. Is the gauge compliant with recognised standards? Yes, the tool is manufactured to DIN 7162, which ensures compatibility with established go/no‑go procedures and inspection documentation. What is the material and why does it matter? Made from hardened steel, the gauge offers abrasion resistance and dimensional stability under regular use, supporting consistent pass/fail decisions. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of precise, rapid thread identification combined with a lightweight, corrosion‑resistant design for smoother assembly and inspection workflows. The set’s anodised aluminium gauges and organised plastic case enable fast checks of common metric threads; order directly via Metav Werkzeuge or contact our consultants for technical advice. Gewindekontrollsatz MS910.425 — Thread gauge set (anodised aluminium, metric) by Filetta The Gewindekontrollsatz is a compact identification set for metric internal and external threads, intended for workshop inspection, maintenance and assembly tasks Anodised aluminium construction For metric internal and external threads Supplied in a durable plastic case 20-piece set covering M3–M24 Faster thread identification for everyday production The gauge set accelerates routine identification and basic verification of metric screw threads, reducing time lost on uncertain assembly decisions. Thanks to the wide size range from M3 to M24 and the inclusion of both internal and external gauges, common pitches and diameters can be checked on the spot. The primary benefit is operational efficiency: fewer stoppages during assembly and faster throughput in inspection processes. The solid, repeatable fit of each gauge supports reliable visual and tactile confirmation of thread form and pitch. Lightweight, corrosion‑resistant construction for frequent handling Being manufactured from anodised aluminium, the components combine durability with low weight, making them comfortable for daily use in bench and field environments. The surface treatment helps resist wear and corrosion, preserving the profile of each gauge and extending service life. Packaged in a plastic case that keeps items organised and protected, the set is easy to transport between workstations and to store without risk of damage to the thread contours. This construction promotes consistent handling with minimal maintenance. Practical scope for incoming inspection and maintenance The set is designed as a practical aid for incoming goods inspection, routine maintenance and quick on‑machine checks. It is intended for identification and coarse verification rather than micrometric measurement: the gauges confirm thread form and common pitch compatibility to avoid assembly errors. For workshops that need straightforward, rapid decisions—accept, reject, or select the correct fastener—this solution reduces rework and saves time in quality control routines while supporting a smooth production flow. Clear contents and metric compatibility for everyday sizes Contents include gauges for standard metric sizes that are frequently encountered in mechanical and electrical assemblies. The 20‑piece composition covers a typical workshop spectrum from smaller machine screws up to larger bolts used in fixtures and assemblies. This configuration makes the set suitable as a bench reference or as part of a mobile inspection toolkit, supporting technicians who require quick identification without complex measurement equipment. The lightweight profiles and organised layout aid rapid selection and return to service. For reliable metric thread identification from Filetta choose Metav Werkzeuge — contact our Emmerich specialists for tailored advice and fast supply via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: MS910.425 Manufacturer: Filetta Material: anodised aluminium Thread type: metric Set: 20 pieces Facts Sizes included: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0 Suitable for: internal and external threads Special features Identification and basic verification of metric threads Lightweight, corrosion‑resistant anodised finish Supplied in a protective plastic case Compact, workshop‑oriented organisation FAQ What is the primary purpose of this gauge set? The Gewindekontrollsatz MS910.425 by Filetta serves for quick identification and basic verification of metric internal and external threads to support inspection and assembly decisions. Can the gauges measure thread tolerances precisely? The set is intended for identification and coarse verification rather than precision tolerance measurement; for high‑accuracy checks, use calibrated metrology instruments. Which sizes are covered by the set? The set contains 20 gauges covering common metric sizes from M3x0.5 up to M24x3.0, suitable for many workshop and maintenance tasks. Is the material suitable for frequent workshop use? Yes — the gauges are made from anodised aluminium, providing a balance of lightweight handling and corrosion resistance for regular use. Does the set include a case for transport and storage? The Filetta MS910.425 is supplied in a durable plastic case that keeps each gauge protected and organised for transport between workstations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of the combination of wide standard coverage, clear dimension data and compact shop-floor usability to speed up design and inspection tasks; order the thread chart via Metav Werkzeuge or ask our consultants for application advice. Filetta Thread Chart – comprehensive thread dimension reference, clear-format A Filetta Thread Chart that provides an immediate overview of thread dimensions across common international systems, intended as a compact reference for design, production and inspection. Universal lookup for Metric, UNC, UNF, BSW Clear dimensions for Gas and BA threads Compact format for shop-floor reference Useful for design, inspection and procurement Fast decisions with consolidated thread data The core benefit of this reference is the consolidation of many standards into a single sheet. The chart lists sizes and key dimensions for metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M and EG-MF, enabling rapid decisions during setup and verification. By combining these standards, the table reduces the need to consult multiple manuals and supports faster tool selection and drawing checks. Clear labelling and organised columns turn otherwise time-consuming lookups into a quick verification step, which improves shop-floor throughput and reduces machine idle time. Improved accuracy for manufacturing and inspection Having standard dimensions collated in one reference lowers the risk of specification errors when producing threaded parts. The chart highlights pitch, nominal diameters and common conversions, making it straightforward to match taps, dies and mating components. This logical presentation supports quality control routines and assists inspectors in cross-checking parts against the correct standard. Presented as a compact, easy-to-read layout, the reference helps maintain measurement integrity without complex interpretation, supporting reliable outcomes in both small-series manufacturing and routine maintenance. Practicality for engineers, buyers and technicians Designed to serve multiple roles, the table is a practical tool for designers verifying thread fits, for procurement teams specifying the correct fasteners, and for technicians performing assembly checks. The compact format is suited to the toolroom, drawing office or bench, meaning the information is available where decisions are actually taken. With its focus on usability, the reference speeds up specification workflows and contributes directly to process efficiency—an economical improvement in daily operations. Clear communication between teams and suppliers Standardised references reduce misunderstandings between design, production and suppliers. Using one authoritative chart for common thread forms creates a single source of truth that simplifies ordering and reduces returns due to mismatched threads. The clear mapping of thread types and sizes supports consistent documentation in technical drawings and procurement lists, improving collaboration across departments and with external partners. Contact Metav Werkzeuge today for procurement support, bulk orders or specific format requests for the Filetta Thread Chart (SKU MS835.162) — expert advice and reliable delivery from Emmerich are available to help integrate this reference into your workflow Technical Data Article number: MS835.162 Name: Thread Chart (Gewindetabelle) Manufacturer: Filetta UID: MS835.162 Facts Standards included: Metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M, EG-MF Purpose: Quick lookup of thread dimensions and pitches Intended use: Design checks, inspection reference, procurement specification Special features Consolidated display of multiple international thread systems Compact, shop-floor friendly format Suited for engineers, inspectors and purchasing staff FAQ Which thread standards are covered in the chart? The chart lists common standards including metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG‑M and EG‑MF for immediate comparison. Is this chart suitable as a shop-floor reference? Yes, the Filetta Thread Chart (SKU MS835.162) is designed for quick lookups at the bench or in the toolroom and is optimised for practical use by technicians and inspectors. Can the table be used for procurement specifications? The consolidated dimensions and standard identifiers make the chart appropriate for clear procurement documentation and ordering lists. Does the chart include pitch and nominal diameter data? Yes, the presentation includes key dimension data such as pitch and nominal diameters to aid fitting and tool selection. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com