High-precision micrometers for exact external diameter measurement
Bügelmicrometers, also known as micrometers or outside micrometers, are engineered for the precise determination of external diameters, material thicknesses and shaft dimensions in metalworking and quality assurance, delivering repeatable results down to 0.001 mm with a defined measuring force. Their robust frame prevents deflection while the integrated ratchet ensures consistent contact pressure, making them ideal for in-process checks at the machine or final inspection in the metrology lab; available variants include analogue, digital and carbide-tipped measuring faces for different surfaces and applications. The design enables one-handed operation via the frame while the thimble and ratchet provide fine adjustment and secure locking of the spindle, supporting efficient handling of small or awkward parts. Suitable for toolmaking, automotive production and industrial quality control, these micrometers combine stiffness, ease of use and data-capable digital options for seamless documentation.
3mm Special Ball Tip For Indirect Gear Tooth-Thickness Measurement, Module 1.75 — Metav IndustryLine
Take advantage of a compact 3 mm measuring ball and module 1.75 compatibility combined with pairwise delivery for matched inspections; order the Special ball insert D 3 mm directly via Metav Werkzeuge or ask our consultants if needed. Special ball insert D 3 mm — accessory for indirect tooth-thickness measurement, module 1.75 (Metav IndustryLine) The Special ball insert D 3 mm is an accessory designed for indirect measurement of gear tooth thickness on components with module 1.75, ideal for integration into gear-checking setups and comparators. 3 mm measuring ball diameter Compatible with module 1.75 gears Supplied pairwise for matched checks Consistent tooth-thickness results with a defined contact geometry The compact measuring ball establishes a repeatable contact point for indirect tooth-thickness measurement, reducing variability caused by crown or flank differences. By using a precisely dimensioned 3 mm sphere, the contact radius becomes consistent across checks, which improves comparability between workpieces and inspection cycles. This approach is particularly effective when evaluating spur gears or small pinions where direct contact probes cannot access the groove reliably. The result is a measurable improvement in process control and fewer false rejections during batch inspection. Fast adaptation and reduced setup time for shop-floor inspection Supplied pairwise, the inserts are matched to facilitate quick exchange and balanced measurement across mating positions, so setups for gear checks run more smoothly. The small mass and compact form make mounting straightforward on common gear gauges and fixtures; lightweight construction minimises influence on the measuring head and shortens settling times. For production environments where throughput matters, the accessory supports efficient measurement routines while maintaining the required reproducibility. Clear evidence for quality assurance and traceable inspection routines As part of the Metav IndustryLine portfolio, this measuring accessory contributes to a traceable inspection chain and aligns with workshop-level quality concepts. The defined module 1.75 specification and precise 3 mm diameter enable reliable documentation of measurement procedures and support repeatable results during routine audits. When combined with calibrated measuring equipment, the use of matched ball inserts helps to reduce operator-dependent scatter and strengthens confidence in acceptance decisions for gear parts. For matched inserts and application advice from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability for specific gear types and inspection rigs Technical data SKU: M309.185 GTIN: 4054469118628 ECLASS: 21170324 Key measurements Ball diameter: 3 mm Module: 1.75 Weight: 0.1 kg Tariff number: 90173000 Special features Supplied pairwise For indirect tooth-thickness measurement Category: Measuring devices › Accessories Intended as accessory for gear inspection FAQ What is the primary application of this insert? The Special ball insert D 3 mm (SKU M309.185) is intended for indirect measurement of gear tooth thickness on components specified for module 1.75. Can the insert be used on different gear modules? The insert is manufactured for module 1.75 applications; for other modules, matching inserts with the appropriate ball diameter should be selected to maintain measurement accuracy. How is the insert supplied and handled during inspection? The item is supplied pairwise to allow matched checks; the paired delivery supports balanced measurement positions and straightforward replacement during inspection cycles. Does the insert change the measurement procedure compared with direct probes? Using a ball insert for indirect checks shifts the contact geometry; this provides reliable, repeatable contact points where direct probes cannot reach, improving comparability across similar parts. Is this accessory suitable for use on production metrology benches? Yes, the insert is designed as a precision accessory for gear inspection rigs and comparators; its compact form supports fast adaptation on shop-floor metrology setups. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4 mm Special Ball Insert For Indirect Gear Tooth Thickness Measurement, Module 2.25 - Metav IndustryLine
Take advantage of a dedicated measurement accessory that matches module 2.25 gears: the compact 4 mm ball geometry combined with paired delivery ensures reproducible indirect tooth‑thickness checks and reliable batch comparisons. Order the accessory directly via Metav Werkzeuge or contact the consultants for compatibility advice. Special ball insert D = 4 mm (module 2.25) – Gear measurement accessory by Metav IndustryLine The Special ball insert D = 4 mm for indirect gear tooth thickness measurement; module 2.25 is a purpose-built measuring tip intended for use as a matched pair in indirect evaluation of gear tooth thickness on module 2.25 gears. 4 mm ball diameter for module 2.25 Supplied in pairs for consistent readings Compatible with indirect tooth-thickness measuring methods Reliable indirect tooth-thickness evaluation with repeatable contact geometry The insert provides a defined contact point that reproduces the intended inspection geometry for indirect measurement of tooth thickness on module 2.25 gears. By employing a small, accurately shaped ball tip, the accessory minimises measurement uncertainty associated with variable contact points and allows comparative checks without requiring direct tooth-probing tools. This approach shortens inspection routines while maintaining traceable reproducibility between measurement cycles. Matched delivery for consistent comparative measurements Delivered as a matched pair, the inserts are intended to be used together to preserve symmetry in successive measurements. Paired supply reduces scatter between left‑ and right‑hand checks and supports quick cross-validation of production batches. At a net weight of 0.1 kg for the set, the accessory is light enough for straightforward handling yet substantial enough to seat reliably in typical gauge fixtures used for indirect gear evaluation. Easy to integrate into workshop and inspection fixtures The design is focused on simple retrofitting to existing toothed-wheel inspection rigs and comparative gauge jigs. The geometry of the tip aligns with standard indirect‑measurement procedures, so setup time is reduced and the measurement workflow becomes more efficient. This results in faster in‑process checks and a lower risk of production delays, supporting higher throughput in both small workshops and serial inspection environments. What to expect in practice and why it matters As a specialised accessory for module 2.25 gears, the insert supports consistent quality control and faster decision‑making on the shop floor. Using defined contact geometry and paired tips makes comparative assessments less dependent on operator technique, which helps to reduce rework and maintain steady output quality. For operations that demand reliable, repeatable tooth‑thickness data without complex retrofits, this accessory offers a pragmatic balance of functionality and simplicity. Choose the Metav IndustryLine accessory for assured compatibility with module 2.25 measuring processes — contact Metav Werkzeuge for detailed specification checks and ordering support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.187 GTIN: 4054469118642 Customs tariff number: 90173000 Facts Ball diameter: 4 mm Module: 2.25 Weight: 0.1 kg Special features Accessory for indirect gear tooth-thickness measurement Supplied in pairs for matched measurements Brand: Metav IndustryLine ECLASS: 21170324 FAQ How is the insert used for tooth-thickness checks? The insert is designed for indirect tooth‑thickness measurement; the Special ball insert D = 4 mm serves as a defined contact element in comparative gauge setups for module 2.25 gears. Are the inserts supplied individually or as a matched set? They are supplied as a matched pair to ensure consistent readings and symmetry across comparative measurements. Can this accessory be fitted to existing gauge fixtures? Yes, the geometry is intended for straightforward integration into standard indirect measurement jigs and comparative inspection fixtures for gears of module 2.25. Does the product include a calibration certificate? No calibration certificate is indicated in the product data; the Special ball insert D = 4 mm is delivered as an accessory for inspection setups and should be used within the calibration regime of the host gauge system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.5-3.5 TPI Thread Insert 55° Whitworth Style - Metav IndustryLine
Take advantage of the combination of precise Whitworth profile, workshop compatibility and compact handling to streamline thread verification tasks; order the Thread inserts M309.098.9 directly via Metav Werkzeuge or ask our consultants if needed. Thread inserts M309.098.9 — Thread gauge inserts, 4.5–3.5 TPI, 55° Whitworth (Metav IndustryLine) A set of Thread inserts M309.098.9 engineered for verification of Whitworth-form 55° threads in thread-gauging and measurement applications Precision 55° Whitworth profile Compatible with 4.5–3.5 TPI gauges Compact accessory for metrology rigs Accurate Whitworth profile for dependable thread verification The core benefit of these inserts is the 55° Whitworth profile, manufactured to match the historical Whitworth form used across legacy and specialist components. The geometry ensures a faithful mechanical reference when comparing threads against gauge spindles or working standards, reducing ambiguity during acceptance checks. Designed for gauge use in inspection benches, the inserts help convert a visual or tactile check into a repeatable measurement step. The specification 4.5–3.5 TPI is stated in threads per inch (TPI), a standard imperial descriptor; this range covers coarse Whitworth pitches commonly found in heavy fastenings and historical components, delivering clear identification during routine verification. Built for efficient workshop integration and faster inspections These inserts are an accessory tailored to fit established thread-measuring instruments and gauge adaptors, enabling quicker changeover and less downtime. The compact form and low mass facilitate handling in tight inspection setups and on small benches; the nominal weight of 0.1 kg keeps adapters balanced while in use. As an accessory for metrology workflows, the inserts support efficient inspection loops: align, engage, and verify. This translates into measurable time savings on repetitive checks and reduces cumulative measurement uncertainty caused by frequent component swaps. Compatibility and traceability to support quality control processes Supplied under the Metav IndustryLine designation, the inserts integrate into documented inspection routines and provide an identifiable article for audit trails. The clear marking with SKU M309.098.9 and GTIN ensures traceability in inventory and quality records, which simplifies procurement and batch control. For quality managers, the availability of a defined accessory that matches the Whitworth 55° form means fewer bespoke adjustments and a predictable verification outcome when used with thread gauges and measuring spindles commonly found in maintenance and restoration shops. Practical advantages for maintenance, restoration and specialised manufacturing In environments where Whitworth threads remain in service—such as vintage machine restoration, railway engineering or specialist plant maintenance—these inserts provide a pragmatic means to confirm thread form quickly without expensive bespoke fixtures. The accessory character makes it a cost-effective supplement to a metrology set-up: instead of reworking or trial-fitting components, the inserts enable a controlled check that supports decision-making — repair, refurbish or replace. Combined with Metav’s logistics and stock range, the parts are straightforward to source and integrate into a parts-management system. Contact Metav Werkzeuge for specification advice and to secure the M309.098.9 thread inserts for Whitworth 55° applications; assistance is available from Emmerich for product selection and delivery coordination Technical Data Article number: M309.098.9 GTIN: 4054469118406 Tariff number: 90173000 Facts Threads per inch: 4.5–3.5 TPI Thread angle: 55° Weight: 0.1 kg eCl@ss: 21170324 Special features Whitworth 55° profile Accessory for thread gauges / measuring instruments Category: Measuring devices — accessory FAQ What thread form do these inserts represent? The inserts represent the Whitworth 55° thread form and are manufactured to correspond with the historical Whitworth profile for reliable verification. Which TPI range is covered by the inserts? The inserts cover a 4.5–3.5 TPI range, stated in threads per inch for compatibility with imperial-thread gauges. Can these inserts be used with standard thread measuring spindles? Yes, the accessory is designed for use with thread gauges and measuring instruments that accept thread inserts for verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.5mm Special Ball Insert for Indirect Gear Tooth Thickness Measurement, Module 2.5 - Metav IndustryLine
Take advantage of the combination of precise contact geometry, module‑specific design and paired delivery for reliable gear tooth thickness checks; order directly via Metav Werkzeuge or consult our specialists for integration advice. Special ball insert Ø4.5 mm for indirect gear tooth thickness measurement (module 2.5) — Metav IndustryLine accessory The Special ball insert Ø4.5 mm is an accessory designed to enable indirect measurement of gear tooth thickness on module 2.5 gears, providing a compact solution for repeatable contact in workshop and inspection environments. Precision ball tip Ø4.5 mm for repeatable contact Designed for module 2.5 gear measurements Supplied in pairs for symmetrical evaluation Precise contact geometry for consistent indirect measurements The insert provides a defined spherical contact with a Ø 4.5 mm ball, which establishes a reproducible reference point when performing indirect tooth thickness checks on module 2.5 gears. By fixing the contact geometry, the insert reduces variability from ambiguous contact points and supports a predictable measurement result. The controlled contact improves process reliability and lowers the likelihood of rework in production or quality control tasks, making it suitable for routine workshop inspection as well as incoming goods checks. Streamlined workflow through pairing and compact design Delivered in pairs, the inserts enable symmetrical measurements and quick cross‑checks that accelerate decision making on component conformity. The compact format and low mass mean they are easy to exchange and store, reducing downtime during inspection cycles. As a dedicated accessory for gear metrology, the insert integrates into existing measuring fixtures and adapters used for tooth thickness evaluation, helping to maintain throughput without the need for complex fixturing changes. Clear applicability and practical handling advice Designed specifically for module 2.5 applications, the ball insert supports indirect measurement methods where a spherical probe approximates flank contact to derive tooth thickness via established geometric calculation. The defined Ø 4.5 mm diameter ensures correct flank engagement for the specified module, improving repeatability compared with ad‑hoc probes. Regular visual inspection and gentle cleaning with a lint‑free cloth will keep the contact surface in good condition and preserve measurement integrity. For detailed compatibility checks or to arrange supply of the Metav IndustryLine ball inserts, contact Metav Werkzeuge for technical advice and order processing at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M309.188 GTIN: 4054469118659 ECLASS: 21170324 Facts Module: 2.5 Ball diameter: 4.5 mm Weight: 0.1 kg Customs tariff number: 90173000 Special features Delivery: supplied in pairs Application: indirect tooth thickness measurement Category path: Measuring instruments › Accessories FAQ What is the primary use of this ball insert? The special ball insert Ø4.5 mm from Metav IndustryLine is intended for indirect measurement of gear tooth thickness on module 2.5 gears, providing a reproducible spherical contact for geometric evaluation. Is this insert suitable only for module 2.5 gears? The insert is designed specifically for module 2.5 applications; the Ø 4.5 mm ball diameter is selected to match the contact geometry required for that module. Why is the product supplied in pairs? Supplied in pairs to allow symmetrical measurements and fast cross‑checks; using both inserts helps validate measurement setup and reduces systematic measurement error. Which measuring equipment accepts this insert? The insert is compatible with measuring fixtures and gauge holders intended for gear tooth evaluation that accommodate exchangeable ball probes; the Metav IndustryLine insert is designed for straightforward integration into such setups. How should the insert be maintained? For best results, keep the ball surface clean and dry; wipe with a soft, lint‑free cloth and avoid aggressive solvents to preserve dimensional integrity of the contact sphere. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40-32 TPI Thread Insert 55° Whitworth Profile - Metav IndustryLine
Take advantage of precise verification of Whitworth threads with a dedicated 40–32 TPI insert and a true 55° profile for repeatable checks. Durable, compact construction reduces handling error and supports consistent measurement routines. Order the M309.098.2 directly via Metav Werkzeuge or ask our consultants if needed. Gewinde‑Einsätze, 40 - 32 TPI, 55° — Thread insert for Whitworth 55° checks (Metav IndustryLine) Gewinde‑Einsätze, 40 - 32 TPI, 55° serve as a compact verification accessory for comparing or checking Whitworth 55° thread forms in workshop metrology, suited to precision inspection and gauge use 40–32 TPI Whitworth 55° compatibility Precision accessory for thread measurement Compact lightweight design, 0.1 kg Reliable verification of Whitworth threads for reduced rework This insert provides a defined 55° thread profile and a 40–32 TPI pitch for repeatable inspection of Whitworth-form threads. By using a standardised reference, the accessory supports faster go/no‑go decisions on thread quality and reduces costly rework cycles. The compact format and low mass make handling simple during serial checks, improving throughput in the inspection process while maintaining traceable results. Seamless integration into existing gauge and inspection workflows Designed as a metrology accessory, the insert mates with standard thread-checking fixtures and gauge holders to form part of a concise measurement routine. The robust geometry ensures stable contact and consistent readings; this stability lowers measurement scatter and supports clear pass/fail criteria in production lines or measuring benches. Compatibility with Whitworth 55° standards simplifies documentation and quality control procedures. Practical design that supports workshop efficiency With a lightweight construction and clear specification, the insert simplifies storage and deployment across multiple stations. The small form factor allows easy transport between benches without adding handling complexity, while the precise profile reduces operator influence during checks. Together, these aspects contribute to a measurable improvement in inspection speed and reproducibility for routine thread verification. Contact Metav Werkzeuge for tailored advice on integrating the M309.098.2 thread insert into inspection setups or to arrange procurement and delivery from Emmerich. Technical Data Article number: M309.098.2 GTIN: 4054469118338 Label: Gewinde‑Einsätze, 40 - 32 TPI, 55° für Whitworth 55° Manufacturer: Metav IndustryLine Facts Thread pitch: 40 − 32 TPI Angle: 55° Weight: 0.1 kg Tariff number: 90173000 ECLASS: 21170324 Special features Designed for Whitworth 55° thread form Category: Accessory for metrology / gauges Compact, lightweight design Two product images available (main and detail) FAQ What thread form and pitch does this insert represent? The Gewinde‑Einsätze M309.098.2 represents a Whitworth 55° profile with a 40–32 TPI pitch for standardised thread checks. Can this insert be used in production line inspections? Yes. The M309.098.2 thread insert is designed as a metrology accessory for routine checks and can be integrated into production inspection workflows to support quick pass/fail evaluation. Is the insert supplied with calibration documentation? The product data does not specify supplied calibration documents. For details on certification or traceable calibration for the M309.098.2, please contact Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40-90mm Universal Micrometer With Interchangeable Anvils, Wireless+USB Digital Readout - Microtech Metrology
The combination of compact design, high-resolution digital readout and versatile data connectivity makes this micrometre an efficient choice for precision inspection and small-part assembly. With a measuring range suited to micro applications and an accuracy of ±0.004 mm, reliability is balanced with easy data capture. Order the micrometre directly via Metav Werkzeuge or ask our consultants if needed. Universal outside micrometre — digital with Wireless + USB (Microtech Metrology) Universal outside micrometre for precise external measurements in fine mechanical and inspection tasks, covering the micro measuring range from 40 to 90 mm. Digital display 0.0001 mm resolution Wireless and USB data output Accuracy ±0.004 mm Interchangeable anvils not included Precision for micro applications and traceable measurement The micrometre is designed for the micro range (max 10–100 mm), making it ideal for fine mechanical work where compact dimensions and repeatability matter. The instrument delivers a resolution of 0.0001 mm and an accuracy of ±0.004 mm, values that support routine quality checks and dimensional control in workshops and small-series production. The combination of a high-resolution digital readout and robust mechanical guidance reduces reading errors and speeds up inspection cycles, which improves throughput without sacrificing measurement certainty. Integration into measurement workflows and data capture Equipped with Wireless and USB data outputs, the device enables straightforward transfer of readings into SPC systems or inspection software, cutting manual transcription and potential input errors. The digital interface supports efficient documentation and faster traceability during batch inspections. The instrument’s measuring depth of 32 mm and compact frame suit confined setups and jig-mounted checks; interchangeable anvils are supported for application flexibility, but anvils are not included, allowing configuration for specific tasks as required. Robust handling and everyday benefits at the bench Built for frequent use, this digital micrometre combines practical ergonomics with direct data export to simplify quality routines. The compact instrument is well suited to precision assembly, small components and laboratory inspection where a balance of repeatability, data connectivity and quick handling is required. Integration-friendly interfaces mean fewer process interruptions and a more reliable audit trail for measurement results, enhancing both productivity and compliance in the workshop. Discuss data-integration options and order the Microtech Metrology micrometre via Metav Werkzeuge to equip the workshop with a compact, connected measuring solution; Metav Werkzeuge in Emmerich provides technical advice and local supply. Technical Data Article number: 115050977 GTIN: 4061905458231 Manufacturer: Microtech Metrology Facts Measuring range: 40–90 mm Measuring depth: 32 mm Resolution: 0.0001 mm Accuracy: ±0.004 mm Data output: Wireless + USB Digital device: yes Special features Interchangeable anvils (not included) Compact frame for micro-range measurements Suitable for fine mechanical and inspection work FAQ What measuring range does this micrometre cover? The Universal outside micrometre covers 40–90 mm, placing it in the micro-range category suited to fine mechanical parts and small assemblies. Is the micrometre ready for data transfer to inspection software? Yes, the instrument offers Wireless and USB data outputs for straightforward connection to SPC systems and measurement software. Are interchangeable anvils supplied with the micrometre? Interchangeable anvils are supported for the Microtech Metrology micrometre, but the anvils are not included with the device and must be ordered separately if required. What accuracy and resolution can be expected during routine use? The device provides a resolution of 0.0001 mm and an accuracy of ±0.004 mm, suitable for precise quality-control tasks in workshops and small-series production. For which applications is this micrometre best suited? This compact digital micrometre is intended for fine mechanical inspection, small-part assembly and laboratory checks where compactness, repeatability and data capture are priorities. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-450mm Bore Gauge Micrometer With Microcomputer, Wireless/USB, Ø8mm Measuring Faces, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, reliable 0.01 mm resolution and wireless data transfer to speed up inspection routines; order the calibrated instrument directly via Metav Werkzeuge or ask their consultants for application advice. Outside Micrometer 400–450 mm — digital, Wireless + USB (Microtech Metrology) The Outside Micrometer 400–450 mm is a digital precision instrument for measuring large external diameters in production and inspection environments. ISO 17025 calibration certificate included Wireless and USB data output 0.01 mm resolution for precise measurement Ø8 mm hardened measuring faces Robust measurement for large diameters The micrometer covers a measuring range 400–450 mm, providing a dependable solution for external diameter checks on sizeable components such as shafts, large bearings and housings. The long spindle travel is supported by a measuring depth 110 mm, which maintains consistent contact geometry even on deep or recessed features. Hardened Ø8 mm measuring faces ensure wear resistance and repeatability over many cycles, reducing the need for frequent readjustment and extending service intervals on the shop floor. Traceable accuracy and seamless data capture A digital readout with 0.01 mm resolution gives clear, comparable readings for routine quality control. The instrument is delivered fully calibrated to ISO 17025, including a calibration certificate that supports audit trails and measurement traceability. Integrated Wireless and USB outputs enable error‑free transfer of measured values into statistical process control (SPC) systems or inspection software, eliminating manual transcription and speeding up documentation workflows for production monitoring and reporting. Durable design and straightforward operation Microcomputer control and a clear digital display simplify handling of a large-format measuring instrument, while precision mechanisms maintain stability during repeated measurements. The combination of a rigid frame and hardened anvils provides both stiffness and surface protection, so the device remains accurate under frequent use. The ergonomic control elements and rapid data output reduce cycle time in batch inspections and make the device suitable for busy metrology benches or on‑line quality stations. Fits into professional quality management processes The instrument is designed to integrate with laboratory procedures and workshop routines alike. With ISO 17025 calibration included and standardised data interfaces, the micrometer supports documented measurement procedures and helps to align everyday inspections with formal quality systems. Its specification is aimed at engineers and technicians who require both reproducible results and straightforward digital data handling for traceable measurement records. For traceable measurements and seamless data capture, contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) to discuss the Microtech Metrology calibrated outside micrometer (SKU 115054507) and suitable integration options Technical Data Article number: 115054507 GTIN: 4061905040962 Manufacturer: Microtech Metrology Data Measuring range: 400–450 mm Resolution: 0.01 mm Measuring depth: 110 mm Measuring faces diameter: Ø8 mm Special features Digital display with microcomputer control Data output: Wireless + USB Delivered calibrated to ISO 17025 with certificate Suitable for external diameter measurement Category: Outside micrometer FAQ What measuring range does the instrument cover? The Microtech Metrology outside micrometer (SKU 115054507) covers a measuring range of 400–450 mm for large external diameters. Is the instrument supplied calibrated? Yes. The micrometer is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. How can measurement data be transferred to a PC or SPC system? Data transfer is available via Wireless and USB outputs to integrate measurements directly into inspection software or SPC systems. What is the resolution and typical use case for this micrometer? Resolution is 0.01 mm, making the instrument suitable for routine industrial quality control of large components where consistent, reproducible readings are required. What are the measuring faces made for? The measuring faces are Ø8 mm hardened anvils designed to resist wear and to preserve measurement accuracy over prolonged use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-450mm Digital Universal-Bügelmessschraube mit auswechselbaren Ambossen, Mikrocomputer, Wireless+USB, 0,01mm Ablesung, Ambosse NICHT inklusive - Microtech Metrology
Die Universal-Bügelmessschraube von Microtech Metrology kombiniert Genauigkeit von 0,01 mm mit flexibler Datenausgabe per Wireless und USB sowie einem robusten Messbereich von 400–450 mm, wodurch Messabläufe in Fertigung und Qualitätssicherung effizienter werden. Für komplette Versorgung und sichere Lieferung steht Metav als erfahrener Präzisions-Partner bereit; bei Bedarf technische Beratung anfordern. Universal-Bügelmessschraube von Microtech Metrology Die Universal-Bügelmessschraube ist ein digitales Messgerät für präzise Außenmessungen in Industrie und Werkstatt Präzision 0,01 mm für exakte Messwerte Messbereich 400–450 mm für größere Bauteile Datenausgang Wireless und USB Messtiefe 110 mm für tiefere Messungen Ambosse nicht inklusive, auswechselbare Aufnahme Präzision und verlässliche Datenübertragung für den Produktionsalltag Die Universal-Bügelmessschraube bietet eine nachweisbare Genauigkeit von 0,01 mm und ist damit für qualitätskritische Messaufgaben ausgelegt. Die digitale Anzeige in Verbindung mit dem integrierten Mikrocomputer sorgt für eine stabile Messwertverarbeitung, während der Datenausgang per Wireless und USB die direkte Einbindung in Prüfprotokolle und Fertigungsdatensysteme erlaubt. Dieser Aufbau reduziert Fehlerquellen bei der Datenerfassung und beschleunigt Messvorgänge in Serie. Großer Messbereich und praktische Messtiefe für vielseitige Anwendungen Der Messbereich von 400–450 mm und die Messtiefe von 110 mm ermöglichen das Messen von größeren Werkstücken, die sonst gesonderte Vorrichtungen erfordern würden. Die Bauform als Bügelmessschraube garantiert dabei eine einfache Handhabung bei Außenmessungen, während die auswechselbare Ambossaufnahme Flexibilität bei speziellen Messaufgaben bietet. Hinweis: Ambosse sind nicht inklusive und müssen passend zur Anwendung separat beschafft werden. Einfache Integration und Bedienung im Prüfablauf Die digitale Ausführung mit Mikrocomputer erleichtert das Kalibrieren und Übertragen von Messdaten in vorhandene Systeme. Wireless steht für kabellose Übertragung, USB für kabelgebundene Schnittstellen und Datensicherung. So lassen sich Messergebnisse schnell dokumentieren und in Qualitätssicherungsprozesse einspeisen. Wartung und Bedienung sind praxisgerecht gestaltet, wodurch sich Stillstandszeiten minimieren und die Messzyklen effizienter organisiert lassen. Zielgruppenorientierte Eignung für Industrie und Werkzeugbau Dieses Messgerät richtet sich an Qualitätssicherung, Werkzeugbau und industrielle Fertigung, die präzise Außendurchmesser über längere Messbereiche erfassen müssen. Anwender profitieren besonders bei Serienprüfungen und dokumentationspflichtigen Messabläufen, weil die Kombination aus hoher Genauigkeit und direkter Datenübertragung Routineaufgaben vereinfacht. Metav liefert dabei nicht nur das Produkt, sondern auch Beratung und zuverlässige Versorgung aus Emmerich. Microtech Metrology Präzision für Ihren Betrieb sichern und Metav für technische Beratung kontaktieren: E‑Mail info@metav-werkzeuge.com Telefon +49 2822 7131930 WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 115054577 Marke: Microtech Metrology Bezeichnung: Universal-Bügelmessschraube mit auswechselbaren Ambossen und Mikrocomputer GTIN: 4061905457937 Daten Messbereich: 400–450 mm Genauigkeit: 0,01 mm Messtiefe: 110 mm Besonderheiten Datenausgang: Wireless (kabellose Übertragung) und USB (kabelgebundene Schnittstelle) Digital: Ja Ambosse: Nicht inklusive ECLASS: 21170328 FAQ Welche Genauigkeit bietet die Universal-Bügelmessschraube? Die Universal-Bügelmessschraube von Microtech Metrology zeichnet sich durch eine Genauigkeit von 0,01 mm aus, was sie für präzise Prüfaufgaben in Labor und Fertigung geeignet macht. Sind Ambosse im Lieferumfang enthalten? Ambosse sind nicht inklusive; die Universal-Bügelmessschraube verfügt über eine auswechselbare Ambossaufnahme, sodass passende Ambosse separat beschafft werden können. Wie werden Messdaten übertragen und gespeichert? Die Universal-Bügelmessschraube unterstützt Wireless und USB als Datenausgang, wodurch Messergebnisse direkt an Prüfsoftware oder Datenerfassungssysteme übermittelt werden können. Für welche Anwendungen ist das Messgerät besonders geeignet? Das Messgerät eignet sich für Außenmessungen an größeren Bauteilen, Serienprüfungen und Qualitätssicherungsprozesse, insbesondere im Werkzeugbau und in der industriellen Fertigung.
400-500mm Bore Micrometer Digital Touchscreen, ISO 17025 Calibrated, Ø25mm Measuring Faces - Microtech Metrology
Benefit from sub-micron reliability, wireless DataMet connectivity and a rigid CNC‑machined aluminium housing for consistent measurements across medium‑sized assemblies; the instrument is supplied with an ISO 17025 calibration certificate. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology DataMet outside micrometer 400–500 mm — colour touchscreen & wireless output The Microtech Metrology DataMet outside micrometer is an industrial digital micrometer designed for accurate external measurement of medium‑sized components in fixtures, moulds and assembly work. Sub-micron accuracy ±0.005 mm Wireless DataMet synchronisation ISO 17025 calibration certificate included CNC-machined aluminium housing Reduce rejects with measurable precision This outside micrometer delivers an industrial accuracy of ±0.005 mm, which supports tighter process control and fewer reworks when checking critical external dimensions. The instrument’s robust measuring faces (Ø25 mm) and a solid, CNC‑machined aluminium housing maintain stability during repeated measurements, so readings remain consistent across production shifts. The combination of mechanical rigidity and fine tolerance contributes directly to lower scrap rates and improved first‑pass yield. Capture and manage measurement data without interruption Equipped with a Colour 1.5" touchscreen and a comprehensive memory manager (up to 2,000 values), the device stores measured results and basic statistics locally. Data transfer modes include Wireless+USB and wireless HID options, enabling quick synchronisation with inspection software or a shop‑floor tablet; an optional MODBUS RTU output is available for direct integration into industrial PLC networks. These features streamline quality documentation and support Industry 4.0 workflows by removing manual logging steps. Designed for workshop handling and repeatability With a measuring range of 400–500 mm, the micrometer fits the “Mittel” category—suitable for larger jigs, housings and machine components where reach and stiffness must be balanced. The instrument’s weight (2.2 kg) and ergonomics are optimised for stable, repeatable hand measurements, while the colour touchscreen simplifies mode selection and on‑screen prompts. Built‑in functions such as Max/Min, Go/No‑Go and linear/temperature correction increase measurement relevance without extra tools. Traceable calibration and industrial compatibility The micrometer is delivered with a full calibration certificate performed to ISO 17025 (Ilac MRA), providing documented traceability for audits and supplier assessments. Paired with the DataMet measuring hub and Microtech’s MICS system, the device offers online graphical display, probe modes and compensation options that assist technicians in diagnosing process drift. This traceability and connectivity combine to reassure customers and auditors about measurement integrity. Contact Metav Werkzeuge for technical integration advice, the ISO 17025 calibration certificate and details on connecting the Microtech Metrology micrometer to existing data collection systems Technical data Article number: 110185008 GTIN: 4061905039577 Manufacturer: Microtech Metrology SKU: 110185008 Facts Measuring range: 400–500 mm Accuracy: ±0.005 mm Measuring faces: Ø25 mm Display: Colour 1.5" touchscreen Weight: 2.2 kg Special features Wireless+USB data output Memory manager: 2,000 values DataMet measuring hub compatibility Optional MODBUS RTU (RS‑485) CNC‑machined aluminium housing Calibration certificate: ISO 17025 (Ilac MRA) included Functions: Go/No‑Go, Max/Min, linear and temperature correction, statistics FAQ Is the instrument delivered calibrated? Yes. The Microtech Metrology DataMet outside micrometer is supplied with a full calibration certificate performed to ISO 17025 (Ilac MRA). Which measuring range does this micrometer cover and what workshop class is it? The micrometer covers 400–500 mm and falls into the Mittel class, offering the reach required for larger fixtures and assemblies while remaining manageable for hand measurement. How are measurement results exported from the device? Measurement data can be exported via Wireless+USB modes, wireless HID options and can be synchronised with the DataMet hub; optional MODBUS RTU is available for PLC connections. What level of traceability and documentation is provided for audits? Traceability is ensured by the included ISO 17025 calibration certificate; the micrometer also records statistical values and stores up to 2,000 measurements for audit trails. Can the micrometer integrate with Industry 4.0 systems? Yes. The DataMet features, wireless synchronisation and optional MODBUS RTU permit integration into modern data acquisition and PLC systems for centralised process monitoring. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-500mm Micrometer With Digital IP65 Display, Friction Ratchet, Ø25mm Measuring Faces, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a rugged, workshop-ready measuring instrument that combines a wide 400–500 mm measuring range, an IP65-protected digital head and a traceable ISO 17025 calibration certificate for immediate use in quality control. Order the micrometer directly via Metav Werkzeuge or consult the team for application advice. Microtech Digital Outside Micrometer 400–500 mm — digital, IP65, ISO 17025 calibrated A Microtech Digital Outside Micrometer 400–500 mm designed for robust, repeatable external measurements of large components in production, toolmaking and inspection environments IP65-protected digital head ISO 17025 calibration certificate included Measuring range 400–500 mm Ø25 mm hardened measuring faces Precision where large-format measurement matters The large-frame digital micrometer delivers repeatable measurements across a substantial span thanks to a robust frame and Ø25 mm measuring faces that distribute contact forces. The instrument features a digital display with a fine 0.001 mm reading and an indicated accuracy of ±0.007 mm, which together reduce reading errors and support tighter tolerance verification in production. Included setting rods and a delivered calibration certificate under ISO 17025 ensure immediate traceability and documentation for quality assurance processes. The combination of high resolution and certified calibration makes the micrometer suitable for final inspection of assemblies where reliable dimensional data is essential. Built for workshop use: durability and consistent handling Designed for repetitive measuring tasks, the unit offers a friction ratchet to standardise closing force, minimising variation caused by different operators. The IP65 protection rating means the measuring head is sealed against dust and low-pressure water jets, supporting use at the workbench or on the shop floor without sacrificing the electronics. At approximately 2.2 kg the instrument is substantial enough to feel stable in the hand, which assists in consistent positioning across a long measuring span. These mechanical and protective features translate into fewer out-of-tolerance calls and less rework over time. Traceability, documentation and procurement benefits Delivery includes a full calibration certificate performed to ISO 17025 (Ilac MRA), offering documented measurement credibility for internal audits and customer reporting. The micrometer’s technical specification and supplied documentation simplify integration into inspection routines and metrology records. For purchasing and supply reliability, Metav Werkzeuge acts as a quality filter for the European market, providing access to certified measuring instruments and the option to request additional technical data or advice from a dedicated team. Contact Metav Werkzeuge to request the Microtech digital outside micrometer specification sheet, confirm stock availability at Emmerich and arrange purchase or technical clarification through Metav Werkzeuge. Technical data Article number: 110175001 GTIN: 4061905040115 Manufacturer: Microtech Metrology Digital: yes IP rating: IP65 Facts Measuring range: 400–500 mm Resolution (display): 0.001 mm Accuracy: ±0.007 mm Measuring face diameter: Ø25 mm Weight: 2.2 kg Special features Digital micrometer head with IP65 protection Friction ratchet for consistent measuring force Setting rods included Calibration certificate included (ISO 17025 (Ilac MRA)) Robust frame for large-format external measurement FAQ What measuring range does the micrometer cover? The micrometer covers a 400–500 mm span, suitable for medium-range external measurements of larger components. Is the micrometer supplied with traceable calibration? Yes, the instrument is delivered with a calibration certificate performed to ISO 17025, ensuring traceability and audit-ready documentation. What resolution and accuracy can be expected from the device? The digital display shows 0.001 mm increments and the stated accuracy is ±0.007 mm, providing fine resolution for quality control tasks. Can the micrometer be used on a shop floor environment? With an IP65-protected head and a robust frame, the micrometer is designed to withstand dusty and splashing conditions common in workshop settings. Which accessories are delivered with the micrometer? The micrometer is supplied with setting rods and the stated calibration certificate to enable immediate, documented use in inspection processes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4000-5000mm Sub-Micron Modular Bench Micrometer Colour Touchscreen, IP65, ISO 17025 - Microtech Metrology
Take advantage of a modular system that combines long-range measurement capability, robust industrial protection and integrated data handling for uninterrupted production control. The result is a high-capacity, traceable measuring solution that arrives fully calibrated to ISO17025 standards; order directly via Metav Werkzeuge or consult our specialists for configuration and delivery. Microtech DataMet modular outside micrometer — modular system with colour touchscreen The Microtech DataMet modular outside micrometer is a modular, long-range measuring instrument designed for large components and shopfloor integration in industrial metrology. Modular construction for long measuring ranges ISO17025 calibration certificate included Wireless and USB data transfer IP65 protection for industrial environments Built for large-scale precision and repeatability The modular architecture delivers a scalable measuring range of 4000–5000 mm, classifying the instrument among extra-long measurement systems for large components such as shafts, housings and large tooling fixtures. The modular frame and large Ø50 mm measuring faces ensure contact stability and repeatable results over extended spans, while the CNC-machined aluminium housing keeps alignment consistent. Measured values are governed by the system’s stated accuracy of 0.075 mm, which is complemented by the instrument’s industrial rigidity and its substantial mass that reduces the influence of external disturbances. Seamless data flow and Industry 4.0 compatibility Data handling is a core strength: the unit features a colour 1.5" touchscreen, a memory manager for 2000 values with folder organisation, and multiple wireless transfer modes (including Wireless to MDS app and Wireless HID) plus USB HID output. Optional MODBUS RTU (RS‑485) provides direct integration into PLCs and factory networks for automated logging and process control. These capabilities position the micrometer as a rational choice for production environments that require efficient, auditable data streams and reduced manual transcription. Practical operation and measured workflows The instrument’s MICS software supports functions such as on-line graphics, go/no-go checks, max/min capture, formula inputs and temperature compensation, enabling direct decision-making at the measurement point. The modular design allows shipment and reassembly with ease: modules connect to extend the range while preserving calibration parameters. A robust memory and statistics mode simplify quality checks and accelerate traceability tasks, reducing downtime and improving throughput for repetitive inspection routines. Industrial robustness and traceable calibration With an IP65 rating and a solid, CNC-machined block housing, the system withstands harsh shopfloor conditions and routine handling without sacrificing measurement integrity. The micrometer is supplied with a full calibration certificate issued to ISO17025 (Ilac MRA), guaranteeing traceability and compliance for quality assurance procedures. This formal calibration is included with delivery and supports acceptance in regulated manufacturing processes and internal quality audits. Versatile applications and material handling Designed for metrology departments, fixture builders and heavy-duty machining environments, the modular setup addresses large-format measurement tasks that would otherwise require multiple instruments. The instrument’s large measuring faces and module-based reach make it suitable for inspecting assemblies, large shafts and fixtures where conventional hand micrometers cannot reach. Its wireless hub and probe-mode features facilitate synchronised measurements from multiple sensing heads when required. Contact Metav Werkzeuge today to discuss a tailored Microtech DataMet configuration from Emmerich, secure delivery options and assistance with integration into existing measurement workflows Technical data Article number: 110160505 GTIN: 4061905040139 Manufacturer: Microtech Metrology Facts Measuring range: 4000–5000 mm Accuracy: 0.075 mm Weight: 60 kg Modules: 5 Protection class: IP 65 Special features Digital display: Colour 1.5" Touchscreen Data output: Wireless + USB; optional MODBUS RTU Housing: CNC machined aluminium Memory: 2000 values, folder system, statistics mode Measuring faces: Ø50 mm Calibration: ISO17025 certificate included FAQ What measuring range does this system cover? The modular system covers a measuring range of 4000–5000 mm and is intended for extra-long measurements of large components. Is the instrument delivered calibrated for traceability? Yes. The Microtech DataMet modular outside micrometer is supplied with a calibration certificate issued to ISO17025 (Ilac MRA). How are measurements transferred to evaluation software? Measurements can be exported via Wireless to the MDS app, Wireless HID, USB HID, or, optionally, via MODBUS RTU (RS‑485) for PLC and factory network integration. What protection does the unit offer against dust and liquids? The instrument has an IP65 protection rating, suitable for demanding industrial environments. Can the system store a large number of measurements locally? Yes. The built-in memory manager stores up to 2000 values with folder organisation and statistics functions for batch handling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400mm Setting Gauge Metric 60 - Microtech Metrology
Benefit from a Metric 60 thread reference and a 400 mm calibration length that support reliable setup and consistent results; order the setting gauge directly via Metav Werkzeuge or consult our specialists for application advice. Setting Gauge — Thread reference, 400 mm, Metric 60 (Microtech Metrology) A Setting Gauge designed for use as a metric-60 thread reference and calibration aid in workshop and metrology environments. Metric 60 thread reference 400 mm calibration length Accessory for workshop metrology Microtech Metrology quality Precise thread referencing for repeatable setups The setting gauge serves as a dedicated thread reference for applications that require reproducible set-ups or comparative checks. With its Metric 60 designation it provides a clearly defined reference condition for thread-related adjustment tasks, reducing setup time and uncertainty. Engineers and technicians benefit from a consistent datum that simplifies alignment and minimises the trial-and-error phase during fixture or gauge adjustment. Suitable format for extended calibration tasks At a 400 mm length this reference bar bridges the gap between compact gauges and larger calibration standards, allowing measurement benches and fixtures to be checked over a useful span without unnecessary handling complexity. The elongated format supports applications in workshop metrology where a longer reference is necessary, while remaining manageable for bench-top use. The result is improved process efficiency through fewer rework cycles and faster verification steps. Integrates with quality and traceability workflows Intended as an accessory for measurement and setup, the reference bar integrates cleanly into documented quality processes. Use of a dedicated thread reference improves repeatability and supports traceable procedures when recording setup conditions for batch production or inspection runs. Where formal documentation is required, the accessory serves as a stable reference that helps standardise procedures across shifts and workstations. Contact Metav Werkzeuge today for tailored advice on integrating this Microtech Metrology setting gauge into existing measurement processes and to request any supplementary technical data Technical data Article number: 110710040 GTIN: 4061905459290 Manufacturer: Microtech Metrology Facts Length: 400 mm SKU: 110710040 Special features Metric 60 Category: Accessory (Measurement) FAQ What is the primary use of this setting gauge? The setting gauge is used as a Metric 60 thread reference to support calibration, setup and comparative checks in workshop metrology and fixture adjustment. Can the setting gauge be used for traceable setup procedures? Yes, the Microtech Metrology setting gauge is intended to improve repeatability and can be incorporated into documented setup and inspection procedures. What identifiers are available for ordering or inventory? The product is supplied with SKU 110710040 and GTIN 4061905459290 for clear identification. Is this reference suitable for bench-top and fixture checks? The 400 mm length makes the reference bar suitable for bench-top calibration and for checking longer fixtures where a compact gauge would be insufficient. Which brand manufactures this reference gauge? This setting gauge is supplied by Microtech Metrology and marketed as an accessory for workshop metrology. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400mm Setting Gauge Whitworth 55 - Microtech Metrology
Take advantage of a durable, purpose-built gauge that combines Whitworth 55 compatibility with a 400 mm working length to streamline thread setup and inspection. For reliable integration into workshop metrology routines, order the instrument via Metav Werkzeuge or consult the specialists for application guidance. Thread setting gauge (Einstellmaß) — Whitworth 55, 400 mm by Microtech Metrology Thread setting gauge (Einstellmaß) for Whitworth 55 applications, intended as an accessory for metrology workstations and inspection routines. Whitworth 55 thread compatibility 400 mm working length for extended reach Accessory for measuring instruments Reduce setup time with a dedicated thread reference A dedicated thread setting gauge designed for the Whitworth 55 thread form provides a straightforward reference during machine setup and quality checks. The defined thread profile removes ambiguity when aligning gauges or checking tooling, helping to reduce trial-and-error adjustments. The 400 mm working length offers extended access to larger assemblies and fixtures, so alignment and verification can be completed with fewer repositionings, contributing to faster process cycles and higher workshop throughput. Integrate seamlessly into metrology routines As an accessory for inspection benches and workshop measuring equipment, the instrument supports consistent measurement workflows. The clear specification for Whitworth 55 compatibility makes the part immediately applicable where this thread standard is required, allowing it to function as a repeatable reference during set-up and verification steps. Recorded use of a single, dedicated reference item simplifies procedures and increases repeatability across shifts, which benefits traceable quality assurance in production environments. Procurement and stock management made practical Identification data such as SKU 110720040 and GTIN 4061905460104 facilitate ordering, inventory control and document archiving. The concise item description — accessory for measuring devices with Whitworth 55 thread profile and 400 mm length — supports clear purchasing specifications and avoids ambiguity when sourcing replacements or matching tooling across supplier lists. This clarity reduces administrative friction and helps maintain uninterrupted production. For precise thread set-up and to source the Microtech Metrology thread setting gauge, contact Metav Werkzeuge for ordering and technical advice — Metav Werkzeuge is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 110720040 GTIN: 4061905460104 Manufacturer: Microtech Metrology Length: 400 mm Special feature: Whitworth 55 Category: Measuring instruments — Accessory Facts Length: 400 mm Special features Whitworth 55 thread compatibility Accessory for metrology and inspection workflows Image asset available for identification FAQ What thread form does this gauge support? The setting gauge is specified for the Whitworth 55 thread form and serves as a reference for that standard. What is the usable length of the instrument? The working length is 400 mm, suitable for extended reach on larger assemblies. How is the item identified for procurement? Identification is provided by SKU 110720040 and GTIN 4061905460104, which can be used for ordering and inventory purposes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400‑500mm Digital Bore Gauge With Carbide Measuring Faces, Ratchet Feed, Plastic Case - Metav IndustryLine
Benefit from the combination of 1 µm digital resolution, carbide measuring faces and a ratcheted spindle for reproducible, high‑throughput inspection; order the digital outside micrometer M302.027.C directly via Metav Werkzeuge or consult our specialists if required. Digital outside micrometer M302.027.C — 400–500 mm, 1 µm resolution (Metav IndustryLine) The Digital outside micrometer M302.027.C is a large‑range external measuring instrument designed for accurate dimension control of jigs, fixtures and sizeable machined components. 1 µm digital resolution display Carbide measuring faces for wear resistance Ratcheted spindle for constant measuring force RB 4.1 data output for digital logging Reliability for larger parts and repeatable precision This instrument is tailored for mid‑range inspection tasks where reach and stiffness must be balanced. With a measuring range of 400–500 mm it falls into the medium category of workshop micrometers, offering the reach required for larger assemblies while remaining manageable for single‑operator checks. The 0.001 mm display resolution provides submicron readability and, together with a stated accuracy of 0.013 mm, delivers the reproducible results needed for routine quality control in toolmaking and mould construction. The carbide measuring faces resist wear during repeated contact with hard materials and extend the service life of the tool. Consistent measuring force and ergonomic handling A ratcheted spindle and a spindle pitch of 0.5 mm ensure consistent contact pressure and minimise operator‑induced variance during measurement. The matt‑chromed measuring drum improves legibility while resisting glare in brightly lit inspection areas. The instrument’s digital unit features ON/OFF/SET, ABS/INC and UNIT buttons for straightforward operation and fast changeover between metric and imperial readouts. Physical design choices focus on steady support and an intuitive measuring routine, which speeds throughput and reduces rework in production environments. Digital integration and workshop readiness Data export via RB 4.1 enables straightforward logging into inspection software or SPC systems, supporting traceable measurement records and batch documentation. The device is supplied complete with a protective transport case to safeguard accuracy during handling and transit, and it is built to the manufacturer’s Werksnorm for consistent production standards. Applications include incoming inspection, in‑process verification and final part checks across steel, aluminium and other common workshop materials — the micrometer bridges hands‑on measurement with digital workflows for efficient quality assurance. Contact Metav Werkzeuge today to discuss specification details or to reserve the Metav IndustryLine digital outside micrometer M302.027.C with RB 4.1 output and protective transport case. Technical data Article number: M302.027.C GTIN: 4054469163000 Data output: RB 4.1 Category: Outside micrometer (digital) Core specifications Measuring range: 400–500 mm Resolution: 0.001 mm (1 µm) Accuracy: 0.013 mm Spindle pitch: 0.5 mm Number of measuring spindles: 8 Special features Carbide measuring faces Ratcheted spindle for constant measuring force Measuring drum matt chrome‑plated Digital display with ON/OFF/SET, ABS/INC and UNIT buttons Protective transport case included Built to Werksnorm FAQ What range of dimensions can be measured with this instrument? The digital outside micrometer M302.027.C measures externally from 400 mm to 500 mm, classifying it as a medium‑range instrument suitable for larger workshop components. What level of resolution and accuracy does the micrometer provide? The device offers a 0.001 mm (1 µm) resolution and a specified accuracy of 0.013 mm, which supports reproducible measurements for routine quality control. Are the measuring faces suitable for hard materials? Yes, the micrometer is equipped with carbide measuring faces, providing high wear resistance for frequent contact with hard materials. How is measurement data exported from the unit? Measurement values can be transmitted via the RB 4.1 data output, allowing integration with inspection software and data logging systems. Does the instrument include any protective packaging for transport? The M302.027.C is supplied with a protective transport case to maintain calibration and protect the instrument during handling and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Universal Bore Gauge Micrometer With Interchangeable Anvils, Microcomputer Wireless+USB - Microtech Metrology
Benefit from high‑precision measurement combined with modern data transfer and modular tooling: the instrument’s 0.003 mm accuracy and Wireless and USB data output speed up inspection cycles and reduce transcription errors, while the interchangeable anvils enable flexible measurement set‑ups. Order directly via Metav Werkzeuge or consult the on‑site specialists for configuration and supply. Universal micrometer – digital bench micrometer, 0–40 mm range, Wireless + USB (Microtech Metrology) The Universal micrometer offers a compact, digital measuring solution for precise external and step measurements in workshop and production environments. Digital micrometer, 0.003 mm accuracy 0–40 mm measuring range Wireless and USB data output Interchangeable anvils (anvils not included) Precision that shortens inspection time The instrument delivers 0.003 mm accuracy, providing repeatable results for tight tolerances typical in precision engineering and quality control. With a 0–40 mm measuring range and 0.0001 mm resolution on the display, the device is suitable for small components where micrometre‑level deviations are critical. A 18 mm measuring depth supports measurements on stepped parts and constrained geometries, reducing the need for secondary fixtures and saving inspection time. Integrating measurement into the production flow Equipped with Wireless and USB data output, the device removes manual transcription and enables direct capture into inspection software or SPC systems. The digital interface supports faster batch documentation and traceability, which improves process transparency and lowers administrative overhead. Where consistent data logging is required, wireless transfer speeds up throughput and reduces human error without altering established workflows. Modular anvils for diverse measuring tasks The micrometer accepts interchangeable anvils, allowing adaptation to different workpiece shapes and contact radii; this modularity increases versatility across jobs without requiring multiple instruments. Note that anvils are not included with delivery, which makes it straightforward to select the appropriate anvil geometry for each application. The modular approach supports rapid changeovers and reduces inventory of distinct gauges. Robust design for shopfloor use Built as a workshop instrument, the device balances precision with practicality: a compact form factor and durable construction stand up to daily handling in machine shops and inspection benches. The combination of precise measurement capability and straightforward data export makes the tool well suited for toolmakers, service providers and in‑line quality checks. Microtech Metrology’s engineering ensures the unit integrates into existing measuring routines while delivering measurable gains in efficiency and reliability. Contact Metav Werkzeuge to discuss the best Universal micrometer configuration for specific applications or to confirm current stock in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 115050477 GTIN: 4061905457722 Manufacturer: Microtech Metrology Measuring range: 0–40 mm Data output: Wireless + USB Digital: yes Numbers / Core technical data Accuracy: 0.003 mm Display resolution: 0.0001 mm Measuring depth: 18 mm Measuring range min/max: 0 / 40 mm ECLASS: 21170328 Special features / Versions Interchangeable anvils — anvils not included Suitable for external and step measurements Digital data transfer for SPC integration Compact bench body for workshop use FAQ Is the micrometer suitable for routine incoming inspection? The Universal micrometer from Microtech Metrology (SKU 115050477) is designed for routine inspection work with 0.003 mm accuracy, making it suitable for incoming quality checks on small components. How is measurement data transferred to a PC? Data transfer is handled via the unit’s Wireless and USB interfaces; the Universal micrometer supports direct export to inspection software or data loggers for downstream analysis. Are the measuring anvils included with the delivery? The delivery does not include anvils; the Universal micrometer accepts interchangeable anvils, which can be selected separately to match the required contact geometry. What kinds of measurements can be performed with this instrument? The device is optimised for external and step measurements on small parts; its 18 mm measuring depth and compact frame suit stepped components and confined geometries. Can the micrometer be used on the shopfloor in continuous production? Yes. The digital output and robust construction make the micrometer appropriate for repeated use in production environments where rapid documentation and reliability are needed. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
425mm Dial Gauge Micrometer With 35mm Anvil, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 calibration, a 400–425 mm measurement span and wireless data transfer ensures reproducible results and seamless documentation in production environments; order the micrometer directly via Metav Werkzeuge or ask our consultants for integration advice. Digital Micrometer by Microtech Metrology — 400–425 mm, 0.01 mm accuracy, Wireless+USB A digital micrometer engineered for medium-range workshop and fixture measurement with 35 mm flat measuring faces and a touchscreen readout. Wireless and USB data output Touchscreen display 1.54" ISO 17025 calibration certificate included 400–425 mm range with Ø35 mm anvils Consistent metrology through certified calibration This instrument delivers 0.01 mm accuracy with a high-resolution reading of 0.0001 mm, offering a balance between practical robustness and precision for production use. The micrometer’s ISO 17025 calibration and accompanying certificate document traceability and reduce audit effort; calibration to this standard confirms that the measurement chain meets recognised laboratory requirements. The large Ø35 mm measuring faces expand the contact area, improving repeatability on broad surfaces while the non-rotating spindle minimises measurement error due to lateral forces and wear. Simplified data capture for quality workflows Equipped with Wireless+USB outputs and a touchscreen 1.54" display, the instrument supports rapid data transfer to inspection software and SPC systems. Digital transfer eliminates manual transcription and the associated risk of entry errors, enabling direct collection of measured values into production logs. The combination of tactile display and modern interfaces accelerates routine inspections and supports integration into connected metrology setups, making documented traceability straightforward. Medium-range capability for fixtures and assemblies With a measuring span of 400–425 mm, this tool sits in the medium-range class (300–500 mm), where reach and stiffness are carefully balanced. Such a range is well suited to checking larger jigs, housings, moulded parts and subassemblies without resorting to oversized instruments. The device’s geometry and contact diameter are chosen to preserve stability across the span, so single-operator measurements remain reproducible across typical workshop tasks. Durable operation and straightforward maintenance The digital construction reduces sensitive mechanical linkages while the non-rotating spindle and generous anvil faces reduce wear in daily use. Routine maintenance consists of keeping contact faces clean and checking zero against the supplied calibration certificate; replacement or recalibration intervals can be scheduled based on usage patterns and production requirements. The robust data interfaces and solid-state display contribute to long-term reliability and low downtime in serial inspection contexts. Contact Metav Werkzeuge to secure the ISO 17025‑calibrated Microtech micrometer (SKU 110784257) and discuss data integration or delivery options directly from Emmerich Technical data Article number: 110784257 GTIN: 4061905457609 Brand: Microtech Metrology Digital: Yes (touchscreen 1.54") Data output: Wireless + USB Display type: Touchscreen Numbers / core technical data Measuring range: 400–425 mm Reading: 0.0001 mm Accuracy: 0.01 mm Measuring face diameter: 35 mm Special features / versions ISO 17025 calibration certificate included Non-rotating spindle Large flat measuring faces (Teller Ø35 mm) Robust digital interface for integration FAQ Is an official calibration certificate included with the micrometer? Yes. The Microtech digital micrometer is delivered with an ISO 17025 calibration certificate, confirming laboratory traceability of the measurements. How can measurement data be transferred from the device? Measured values can be exported via Wireless or USB connections for direct import into inspection software or SPC systems. What measurement range and anvil size does the instrument cover? The instrument measures from 400 to 425 mm and has Ø35 mm flat measuring faces suitable for broader contact areas. What accuracy and resolution are provided? The micrometer specifies an accuracy of 0.01 mm with a digital reading resolution of 0.0001 mm. Why is the non-rotating spindle beneficial? A non-rotating spindle reduces lateral wear and the influence of spindle rotation on the workpiece, improving repeatability and prolonging anvil life. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
425mm Setting Gauge For Micrometer With Thermal Shield, Ball Measuring Faces, Accuracy ±0.005mm - Metav IndustryLine
Take advantage of the combination of high metrological accuracy, thermal protection and compact handling to secure consistent setting results for external micrometers; order the reference gauge directly via Metav Werkzeuge or consult our specialists for application advice. Setting gauge for micrometers M304.320.4 — 425 mm nominal, ±0.005 mm accuracy Setting gauge for micrometers M304.320.4 is a precision reference tool for adjusting external micrometers and verifying measurement chains in workshop and inspection environments up to 425 mm. *425 mm nominal length *±0.005 mm calibration accuracy *Spherical measuring faces, D 16 mm *Thermal protection for stable readings Dependable reference for external micrometer calibration This setting gauge serves as a reference standard for external micrometers, offering a nominal length of 425 mm and an accuracy of ±0.005 mm. Such precision places the gauge in the high‑accuracy class suitable for fine inspection tasks where repeatability matters. The stated tolerance corresponds to 5 µm, which helps reduce systematic setting errors when transferring a length value between the reference and the measuring instrument. By using a dedicated reference piece, measurement chains are shortened and the likelihood of cumulative deviations in part inspection is minimised. Construction tailored to stable measurements under changing temperatures The gauge is equipped with thermal protection, designed to reduce the influence of ambient temperature fluctuations during short‑term setting operations. The measuring faces are spherical with a diameter of D 16 mm, providing defined point contact for micrometer anvils and limiting positional uncertainty on curved or slightly irregular surfaces. Together these design elements maintain a stable contact geometry and support reproducible settings even when the workshop environment is not thermally ideal. Practical handling for routine inspection workflows With a mass of 0.7 kg, the reference piece is compact enough for straightforward handling while remaining substantial enough to sit securely during adjustment procedures. Integration into regular inspection routines is simple: set the micrometer to the gauge, verify the reading, and if necessary apply the calibration offset. The compact format supports portability between workbench and inspection station and allows technicians to keep a verified reference close at hand for frequent checks. Confidence from a specialist metrology partner As part of the Metav IndustryLine, this reference gauge reflects the distributor’s commitment to accessible precision. The combination of measurable performance characteristics and a robust design offers a pragmatic solution for workshops and small laboratories that require traceable setting aids without complex system integration. Metav’s quality filter for the European market and broad product range make the tool a reliable addition to a controlled measurement environment. Contact Metav Werkzeuge in Emmerich for technical advice and to secure the Metav IndustryLine setting gauge; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M304.320.4 GTIN: 4054469116730 ECLASS: 21170102 Customs tariff number: 90173000 Dimensions & accuracy Nominal length: 425 mm Accuracy: ±0.005 mm Measuring face diameter: 16 mm Weight: 0.7 kg Features & materials Spherical measuring faces Thermal protection Application: setting gauge for external micrometers Category: Accessory (metrology) FAQ What is the intended use of this setting gauge? The setting gauge M304.320.4 is intended as a precision reference for adjusting external micrometers and for short transfer checks within workshop inspection procedures. How precise is the reference and what does ±0.005 mm mean? The device provides an accuracy of ±0.005 mm (5 µm); this indicates the maximum deviation that can be expected between the stated nominal length and the actual length under normal conditions. Are the measuring faces suitable for contact with typical micrometer anvils? Yes, the spherical measuring faces with a diameter of 16 mm are designed to provide defined point contact compatible with standard micrometer anvil geometries. Is the gauge stable in typical workshop temperatures? The unit includes thermal protection to reduce short‑term thermal effects and improve stability during common workshop setting operations. Can this reference be used for calibration of large micrometers up to 425 mm? The nominal length of 425 mm makes it suitable as a reference for external micrometers and setting checks up to that length; verify compatibility with specific instrument ranges before use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45-65mm Five-Point Outside Micrometer 0.01mm Graduation Carbide Faces Ratchet, Supplied in Case - Metav IndustryLine
Reliable five-point measuring performance with tungsten carbide measuring faces, a 0.01 mm graduation and a ratchet stop for repeatable contact pressure — order the micrometre directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine 5‑point external micrometre M309.033 — 45–65 mm, 0.01 mm graduation The 5‑point external micrometre M309.033 is a mechanical precision micrometre designed for measuring three‑ and five‑sided workpieces in the 45–65 mm measuring range. Five‑point measurement for three‑ and five‑sided parts Graduation 0.01 mm for fine readings Tungsten carbide measuring faces for wear resistance Ratchet stop for consistent measuring force Consistent accuracy where geometry matters The instrument offers 0.01 mm scale division combined with a measured accuracy of ±0.006 mm, delivering reliable repeatability for routine inspection tasks. The five‑point contact geometry stabilises the workpiece during measurement, which reduces fixturing time and the need for multiple orientations. As a result, throughput in serial checks can be increased without sacrificing the traceable precision that workshop quality control requires. Robust construction for daily shop use A lacquered frame and matt‑chrome measuring drum provide resilience against knocks and oils commonly encountered on the shop floor, while the tungsten carbide measuring faces resist wear where contact is frequent. The mechanical ratchet stop ensures a uniform measuring force on each reading, avoiding variability introduced by differing hand pressure. The instrument is wholly mechanical and analogue, offering simple, serviceable operation without dependence on batteries or electronics. Practical application and efficiency gains Designed for fast inspection of polygonal turned parts and cold‑formed profiles, the micrometre reduces handling steps for three‑ and five‑sided components by delivering a stable contact geometry. The clear graduation supports quick readings and immediate decision making at the inspection bench, helping to shorten throughput times and maintain production rhythm. For production lines and maintenance shops alike, the device provides a pragmatic balance of durability and measuring fidelity. Confidence through trusted supply and service Supplied under the Metav IndustryLine label, the instrument benefits from a distribution model focused on dependable availability and expert advice from Emmerich. Metav’s portfolio and logistics are geared to support small batches and larger replenishment needs alike, backed by decades of supply to industrial and craft customers. This underpins consistent measurement capability across the workshop and contributes to a resilient quality chain. Choose the Metav IndustryLine precision micrometre for repeatable five‑point measurement — contact Metav Werkzeuge in Emmerich for ordering and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M309.033 GTIN: 4054469117645 ECLASS: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Core specifications Measuring range: 45–65 mm Scale division / graduation: 0.01 mm Claimed accuracy: 0.006 mm Display type: Analogue Reading resolution (abledsung): 0.01 mm Materials & features Frame: lacquered Measuring drum: matt‑chrome Measuring faces: tungsten carbide Ratchet stop: yes Suitable for: three‑ and five‑sided workpieces Weight: not specified in data FAQ How precise is the instrument for routine checks? The micrometre offers a graduation of 0.01 mm and a stated accuracy of 0.006 mm, providing dependable precision for workshop and inspection tasks with repeatable results. Can this micrometre measure polygonal profiles? Yes, the five‑point contact geometry and carbide faces are intended for repeatable measurement of three‑ and five‑sided components, simplifying checks on polygonal turned parts. What ensures consistent contact pressure during measurement? A built‑in ratchet stop maintains uniform measuring force, which reduces operator‑induced variation and supports comparable readings across multiple checks. Is the instrument suitable for daily shop use? The lacquered frame, matt‑chrome drum and tungsten carbide faces deliver robustness for regular use in production and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
450-475mm Precision Micrometer With 35mm Anvil Plates, Touchscreen Readout, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 calibration, a 0.01 mm accuracy rating and modern data transfer to secure reproducible measurements for medium‑range components; order the instrument directly via Metav Werkzeuge or consult the specialists for integration and traceable documentation. Micrometer — 450–475 mm measuring range, ISO 17025 calibrated, touchscreen display A Micrometer designed for medium‑range dimensional checks in fixture and mould work, combining a large measuring span with digital readout and certified calibration for reliable QC processes. 0.01 mm accuracy for reproducible results Wireless and USB data output for easy logging Touchscreen 1.54" for fast readout and control Calibrated to ISO 17025 with certificate included Reliable accuracy for medium‑range components The instrument is built for consistent results across larger parts: the 0.01 mm accuracy specification secures repeatable tolerances while the measurement span classifies the tool as medium‑range (300–500 mm), making it suitable for assemblies, housings and mould components. Delivered fully calibrated to ISO 17025, the device arrives with a calibration certificate, so traceability is ensured from first use and integration into quality management systems becomes straightforward. Modern data transfer and ergonomic measurement faces Equipped with Wireless and USB outputs and a Touchscreen 1.54" display, the device simplifies digital capture and reduces transcription errors during inspection runs. The measuring faces are Teller Ø35 mm, providing stable contact with broader surfaces, while the non‑rotating spindle minimises radial runout during closing. Together, these features reduce handling time and improve data reliability when transferring results to SPC or inspection software. Workshop toughness coupled with fine resolution Designed for production environments, the digital instrument offers a clear readout resolution of 0.0001 mm while maintaining the stated accuracy of 0.01 mm, balancing sensitivity and industrial robustness. The construction supports frequent handling in machine and metalworking settings and the large anvils ensure stable readings on castings and housings. Traceable calibration from Microtech and supply via Metav Werkzeuge provides a dependable procurement route for long‑term measurement consistency. Contact Metav Werkzeuge for expert advice and a quotation on this ISO 17025‑calibrated Micrometer from Microtech Metrology, including guidance on data integration and certification documentation. Technical data Article number: 110784757 GTIN: 4061905457623 Manufacturer: Microtech Metrology Data Measurement range: 450–475 mm Accuracy: 0.01 mm Display reading (resolution): 0.0001 mm Display: Touchscreen 1.54" Special features Digital instrument with Wireless and USB data output Measuring faces: Teller Ø35 mm Non‑rotating spindle Delivered calibrated to ISO 17025 with calibration certificate Suitable for medium‑range metrology tasks FAQ What is the calibrated accuracy of the micrometer? The micrometer from Microtech Metrology is delivered with an accuracy of 0.01 mm and an ISO 17025 calibration certificate that documents traceability and measurement uncertainty. Which measurement range does this instrument cover? The measuring span is 450–475 mm, placing the device in the medium‑range category suitable for larger fixtures and housing measurements. How are measurement results transferred to inspection software? Measurement data can be exported via the device’s Wireless connection or USB interface for direct import into SPC or QC systems. What are the contact faces like and why do they matter? The instrument uses Teller Ø35 mm measuring faces which offer broad, stable contact for improved repeatability on uneven or larger surfaces. Is a calibration certificate included with delivery? Yes; the micrometer is delivered fully calibrated to ISO 17025 and includes the calibration certificate for documentation and quality assurance purposes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
450-500mm Bore Micrometer Digital Wireless/USB Output, Ø8mm Measuring Faces, ISO 17025 Calibrated - Microtech Metrology
Combine high-accuracy measurement with secure data transfer and traceable calibration to keep inspection workflows efficient and auditable; the micrometer’s 0.01 mm accuracy, 0.0001 mm display increment and Wireless + USB output support reliable process control. Order the outside micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Outside micrometer – Digital outside micrometer, 450–500 mm, Wireless + USB (Microtech Metrology) The Outside micrometer is a robust digital instrument for precise dimensional inspection of larger components in production, toolroom and quality‑control environments. Digital display, 0.01 mm resolution Wireless + USB data output ISO 17025 calibration with certificate Measuring range 450–500 mm Precise measurement across a wide span reduces rework and uncertainty The instrument delivers repeatable results across a substantial measuring span of 450–500 mm, combining a high nominal accuracy of 0.01 mm with a fine display increment of 0.0001 mm. Such characteristics enable consistent go/no‑go decisions during incoming inspection or final part verification, reducing scrap and rework. The rigid frame and Ø8 mm measuring faces ensure local contact geometry is stable, while the measuring depth of 110 mm allows access to recessed features. For workshop managers and inspection engineers, this translates into fewer measurement cycles and a more predictable production flow. Integrated data transfer streamlines quality documentation Equipped with Wireless and USB data output, the micrometer feeds measurement values directly into digital records and SPC systems, eliminating manual transcription errors and accelerating reporting. The digital interface supports straightforward connection to common inspection software and statistical packages, enabling real‑time logging of measured values and traceable batch reports. As a result, inspection routines become part of the production data stream, allowing rapid identification of trends and early corrective action — a rational improvement to quality assurance practice. Traceable calibration and ready‑to‑use delivery for audit‑critical processes Delivered fully calibrated in accordance with ISO 17025, the tool includes a calibration certificate for immediate archival and audit use. This traceability guarantees that measurements taken with the device are aligned to recognised laboratory standards, simplifying supplier qualification and regulatory documentation. The digital readout and robust construction make the instrument well suited to metrology labs as well as demanding shop‑floor tasks, offering both laboratory confidence and workshop practicality. For reliable large‑range measurement and traceable results, request the Microtech Metrology outside micrometer (SKU 115055007) via Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 115055007 GTIN: 4061905041167 Brand: Microtech Metrology Digital: yes Data output: Wireless + USB Facts Measuring range: 450–500 mm Accuracy: 0.01 mm Display increment: 0.0001 mm Measuring faces Ø: Ø8 mm Measuring depth: 110 mm eClass: 21170328 ETIM: EC003590 Special features ISO 17025 calibration with certificate Wireless + USB data transfer Digital outside micrometer (frame type) Category: Micrometers FAQ What measuring range does this instrument cover? The outside micrometer covers a measuring range of 450–500 mm, suitable for larger components and assemblies. Is a calibration certificate provided with the instrument? Yes — the micrometer is supplied fully calibrated to ISO 17025 standard and includes a calibration certificate for traceability and audit purposes. How are measured values exported to a PC or SPC system? Measured values can be transferred via Wireless or USB interfaces; the digital data output supports integration into common inspection and SPC software. What accuracy and reading resolution can be expected? The device specifies an accuracy of 0.01 mm with a display increment of 0.0001 mm, offering a balance of practical accuracy and fine readout detail. For which applications is this instrument intended? It is aimed at production inspection, toolroom metrology and quality control tasks involving larger parts where a wide measuring span and traceable results are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
450-500mm Universal Bore Gauge Micrometer Wireless USB, Anvils Not Included - Microtech Metrology
Take advantage of the combination of 0.01 mm accuracy, robust messtiefe 110 mm and integrated Wireless + USB data output for efficient, reproducible measurements of medium-size components; order or request further advice via Metav Werkzeuge. Universal micrometer — 450–500 mm digital frame with Wireless + USB (Microtech Metrology) The Universal micrometer is a large-capacity digital micrometer intended for precise external and step measurements on medium-size assemblies, combining a deep measuring reach with electronic data transfer. Large range 450–500 mm Digital readout 0.01 mm Wireless and USB data output Interchangeable anvil system (anvils sold separately) Reliable high-precision measurement for medium components Equipped with a 0.01 mm resolution, this digital frame delivers stable, repeatable results across its 450–500 mm measuring span. Classification as a medium-range instrument reflects the balance between reach and stiffness required in machine and toolroom environments: sufficient length for larger fixtures and housings while retaining manageable handling characteristics. The specified measuring depth of 110 mm allows access to recessed features and stepped geometries without compromising the micrometer’s mechanical stability. These characteristics reduce measurement variation and support consistent quality control in production and inspection tasks. Seamless data handling to speed up workflows Integrated Wireless + USB data output enables direct capture of measurement values into inspection software or spreadsheets, removing manual transcription and the associated risk of errors. With electronic transfer, traceable measurement logs can be created faster, improving throughput and documentation for batch inspections. The digital electronics and interface therefore serve both accuracy objectives and operational efficiency, supporting rational decisions based on recorded measurements rather than hand-written notes. Flexible setup for varied workshop requirements The instrument’s universal frame accepts interchangeable anvils to adapt to different workpiece geometries; note that anvils are not included and are supplied separately. The robust frame design and digital readout make this micrometer suitable for workshop use where adaptability matters—whether measuring outside diameters, steps or grooves. Precision craftsmanship from the manufacturer underpins dependable mechanical behaviour across the entire measuring range, making the instrument a practical choice when repeatability and adaptability are required. Contact Metav Werkzeuge to discuss configuration options, compatible anvils and integration of Wireless + USB data output into existing inspection routines — Metav Werkzeuge can advise on delivery and application details. Technical data Article number: 115055077 GTIN: 4061905457944 Brand: Microtech Metrology Facts Measuring range: 450–500 mm Resolution / Accuracy: 0.01 mm Measuring depth: 110 mm Data output: Wireless + USB Digital: yes Special features Interchangeable anvils (anvils not included) Universal frame design Category: medium-range micrometer (300–500 mm) Eclass: 21170328 FAQ What measuring range does this micrometer cover? The Universal micrometer covers a measuring range of 450–500 mm, suitable for medium-sized components. Is a calibration certificate supplied with the instrument? The provided product data does not specify an included calibration certificate for the Universal micrometer (SKU 115055077). Are anvils included with delivery? No, the product description states that anvils are not included; the frame accepts interchangeable anvils which are available separately. What depth of features can be measured with this micrometer? The micrometer offers a measuring depth of 110 mm, allowing measurement of recessed and stepped features on larger workpieces. How are measurement values transferred from the instrument? Measurement values can be exported via Wireless + USB data output for direct capture into inspection systems. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
450mm Precision Micrometer With 35mm Anvil Plates, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from a fully calibrated precision instrument with ISO 17025 traceability, a 0.01 mm accuracy rating and robust disc measuring faces Ø35 mm for reliable measurements on medium‑sized components; order the micrometer directly via Metav Werkzeuge or consult our specialists for integration into existing quality workflows. Microtech Metrology Micrometer — 425–450 mm range, 1.54" touchscreen & Wireless+USB A digital micrometer designed for medium‑range workshop and inspection tasks, combining a generous measuring span with smart data output and certified calibration for traceable results. ISO 17025 calibration certificate included Wireless and USB data output 1.54" touchscreen display 450 mm measuring range Disc measuring faces Ø35 mm Consistent measurement reliability through certified calibration Delivered with an ISO 17025 calibration certificate, this digital micrometer provides a verifiable basis for quality control. The instrument’s stated accuracy of 0.01 mm is supported by a fine reading increment of 0.0001, enabling repeatable checks and traceable reports. For production environments where audit trails and documented measurement uncertainty matter, the calibration certificate reduces administrative effort and simplifies acceptance into internal QA systems. The certification also underpins supplier audits and simplifies compliance with customer specifications. Effortless data capture and error reduction in the measurement chain Equipped with a 1.54" touchscreen and Wireless + USB data interfaces, the instrument minimises manual transcription and streamlines data transfer to SPC or inspection software. The non‑rotating spindle and large disc measuring faces Ø35 mm improve positional stability when measuring flat or delicate parts, reducing operator‑induced variability. Practical connectivity options mean measurement values can be logged directly to a laptop or tablet for real‑time analysis, shortening cycle times in routine dimensional checks. Built for medium-range tasks where reach meets rigidity With a measuring span of 425–450 mm, this micrometer falls into the workshop medium category (300–500 mm), offering the best compromise between reach and stiffness for fixtures, moulds and medium‑sized assemblies. The robust anvil geometry and substantial measuring faces maintain alignment over the instrument’s length, so readings remain reproducible across the full range. For toolrooms and small series production this balance translates to fewer repeat measurements and a more predictable inspection workflow. Integration advantages that support productivity and traceability The combination of digital readout, wireless connectivity and certified calibration positions the micrometer as a practical interface between hands‑on inspection and digital quality systems. Where traceability and documentation are required, the supplied calibration certificate supports archive management; where process control is the priority, direct data export reduces rework and speeds up corrective actions. The overall design supports a smoother handover from measurement to control, increasing throughput without compromising measurement confidence. Contact Metav Werkzeuge in Emmerich to discuss technical integration, delivery options and certified calibration for this Microtech Metrology micrometer; reach Metav’s specialists by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 110784507 GTIN: 4061905457616 Manufacturer: Microtech Metrology eClass: 21170328 ETIM: EC003590 Facts Measuring range: 425–450 mm Measuring range (max): 450 mm Accuracy: 0.01 mm Reading increment: 0.0001 Display: 1.54" touchscreen Data output: Wireless + USB Digital: yes ISO 17025: calibration certificate included Special features Disc measuring faces Ø35 mm Non‑rotating spindle Fully calibrated delivery with certificate Wireless and USB data interfaces Digital micrometer with touchscreen FAQ Is the instrument delivered with a calibration certificate? Yes. The micrometer from Microtech Metrology is supplied fully calibrated to ISO 17025 standards and includes the calibration certificate for archive and audit purposes. Which measuring range does the micrometer cover and what is its classification? The device covers 425–450 mm, placing it in the medium‑range class (300–500 mm), suitable for fixtures, moulds and medium‑sized assemblies. How are measurement values exported to a PC or SPC system? Measurement data can be transmitted via the micrometer’s Wireless + USB interfaces for direct logging into inspection software or spreadsheets. What level of precision can be expected during routine use? The micrometer specifies 0.01 mm accuracy with a 0.0001 reading increment, providing repeatable results for standard workshop and inspection tasks. Are the measuring faces suitable for delicate surfaces? The disc measuring faces Ø35 mm provide stable contact over larger surface areas and are well suited to flat or fragile components that benefit from distributed contact pressure. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
450mm Setting Gauge Metric 60, Accessories - Microtech Metrology
Take advantage of the combination of 450 mm reach, Metric 60 compatibility and Microtech build quality to simplify medium‑range setup and fixturing tasks; order the setting gauge Einstellmaß directly via Metav Werkzeuge or consult our specialists for application advice. Setting gauge Einstellmaß (450 mm, Metric 60) — Microtech Metrology The setting gauge Einstellmaß is a 450 mm workshop accessory that provides a standardised reference for medium‑range measurement and fixture set‑up in toolrooms and production metrology. Metric 60 compatibility 450 mm measuring length Accessory for precision instruments Robust construction by Microtech Greater reach without sacrificing stiffness The 450 mm measuring length classifies this tool as medium range, offering the best compromise between reach and rigidity for many workshop tasks. In practice, this means longer components such as subassemblies, housings and larger fixtures can be set up and verified with higher repeatability than with shorter standards, while remaining manageable for single‑operator handling. The extended span reduces the need for multiple partial setups and thereby shortens cycle times in routine adjustment and inspection work. Standardised interface for fast integration Compatibility with Metric 60 interfaces ensures straightforward, standardised integration into existing metrology rigs and clamping systems. This feature supports quicker changeovers and reliable interchangeability of reference points across stations. For engineering teams that rely on consistent datum transfer between jigs, gauges and inspection devices, the compatibility delivers measurable time savings and reduces alignment errors during assembly or tool setup. Practical accessory to streamline workflows As an accessory from Microtech Metrology, this setting gauge serves as a stable reference that simplifies alignment tasks and enhances process control. Using a dedicated setting standard for fixture set‑up reduces ad‑hoc measurement steps and helps maintain consistent measurement practice across shifts. The functional design focuses on improving workflow efficiency and supporting quality assurance activities in machine shops and inspection bays. For reliable medium‑range setup tools and tailored advice on integrating the Microtech Metrology setting gauge Einstellmaß into production, contact Metav Werkzeuge for product supply and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 110710045 GTIN: 4061905459306 Name: Einstellmaß Manufacturer: Microtech Metrology Core technical data Measuring range: 450 mm Special features Metric 60 compatibility Category: Accessory (Zubehör) FAQ What measuring range does the setting gauge cover? The setting gauge provides a 450 mm measuring range, placing it in the medium‑range class suitable for larger workshop components and fixture set‑ups. Is the gauge compatible with Metric 60 systems? Yes, the setting gauge is specified for Metric 60 compatibility, allowing standardised connection and interchangeability with Metric 60 fixtures. Which applications suit this accessory best? This accessory is intended for medium‑range alignment, fixture setup and reference transfers in machine shops, toolrooms and inspection benches where a 450 mm reference span is required. Who manufactures the setting gauge and what is the SKU? The gauge is produced by Microtech Metrology and is listed under SKU 110710045. Can the setting gauge be used together with precision instruments? Yes, the gauge is designed as an accessory for precision instruments and rigs, supporting reproducible setups and consistent datum transfer across inspection and assembly processes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
450mm Setting Gauge Whitworth 55 Thread Reference - Microtech Metrology
Take advantage of the combination of reliable 450 mm nominal length, Whitworth 55 thread compatibility and workshop-ready design for efficient setup and reproducible results; order the setting gauge directly via Metav Werkzeuge or consult our specialists for application advice. Setting gauge – 450 mm, Whitworth 55 thread (Microtech Metrology) Setting gauge for thread and mounting adjustments, designed for compatibility with Whitworth 55 connections and workshop metrology accessories 450 mm nominal length Whitworth 55 thread specification Accessory for measuring instruments SKU 110720045 for ordering Reliable fit-up for threaded assemblies The gauge provides a consistent reference when aligning and setting up fixtures or threaded components in a workshop environment. With a clear focus on repeatability, the 450 mm nominal length gives a stable span for many standard set-ups while the Whitworth 55 thread specification ensures compatibility with legacy and specialist fittings. This stability reduces rework and shortens machine down-time by enabling quick, reproducible adjustments. The design emphasises straightforward handling and integration with existing metrology tooling so that processes are sped up without compromising outcome quality. Practical benefits for production and maintenance Engineered as an accessory for measurement systems, the device supports faster setup cycles and clearer inspection workflows. The interface following the Whitworth 55 standard helps to avoid misfits when working with older or specialised components, lowering the risk of assembly error. As a tool intended for recurrent use in an industrial environment, the gauge contributes to consistent part quality and predictable process control. The simplified interaction with measurement benches and adaptors translates directly into time saved during changeovers and maintenance routines. Documentation and traceability for quality control Product identification is straightforward: SKU 110720045 and GTIN 4061905460111 make procurement and stock control simple and auditable. As an accessory within metrology setups, the gauge supports traceable workflows by linking a physical reference to batch records and inspection logs. The clear labelling and compatibility reduce administrative overhead when documenting measurement chains and help maintain compliance with internal quality systems. For customers who integrate such references into standard operating procedures, the accessory serves as a practical element of traceability. Choose the Microtech Metrology setting gauge with Whitworth 55 thread for consistent workshop set-ups and contact Metav Werkzeuge for purchasing guidance and technical clarification. Technical data Article number: 110720045 GTIN: 4061905460111 Brand: Microtech Metrology Measurements Length: 450 mm Special features Whitworth 55 thread Category: Accessory for measuring instruments Suitable for workshop and production use FAQ What is the primary application of this setting gauge? The setting gauge is intended as an accessory for metrology and workshop set-ups, used to assist with repeatable alignment and threaded component adjustments in production and maintenance. Is the gauge compatible with Whitworth fittings? Yes, the device follows the Whitworth 55 thread specification to ensure compatibility with corresponding fittings and adaptors. Which identifiers help with procurement and stock control? Use SKU 110720045 and GTIN 4061905460111 when ordering or logging the item in inventory systems. Can this accessory be integrated with existing measurement benches? The accessory is designed for straightforward integration into typical workshop metrology arrangements and complements measuring instruments and fixture systems. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Measure external diameters to micrometre precision
Outside micrometers (also known as micrometer screw gauges) are the reference tool when dimensional tolerances leave no room for compromise. With measurement accuracy down to 0.001 mm, these instruments determine outside diameters, material thicknesses and shaft sizes with repeatable results, whether at the machine, on the shop floor or in a controlled metrology room.
How these micrometers deliver reliable readings in practice
Technically, an outside micrometer uses a finely threaded spindle and a fixed anvil; the spindle advance is controlled by a thimble and a ratchet stop, which together ensure a consistent measuring force. The robust frame resists bending during use, while a spindle lock fixes the measured value for reading. Variants range from classic analogue models with vernier or nonius scales to digital versions with IP protection against coolants and an integrated data interface for wireless transfer of quality data. Options include models with tungsten carbide measuring faces, interchangeable spindles and specialised sizes for hard-to-fix components.
Practical advantages that save time and reduce scrap
- Consistent, repeatable measurements thanks to the ratchet stop and rigid frame.
- High resolution of 0.001 mm for micrometre-level quality control.
- One-handed operation via the frame allows simultaneous handling of awkward or small parts (one-handed operation).
- Quick data capture and traceability with digital models featuring a data interface.
- Durable measuring faces and spindle lock for long-term stability (tungsten carbide measuring faces).
Why Metav is the practical choice for your workshop
Metav combines decades of precision expertise with a comprehensive range for industry and trade. From analogue micrometers to advanced digital versions, the Metav assortment acts as a quality filter for the European market, supplying reliable instruments from stock in Emmerich. With a broad catalogue and proven service, Metav reduces supplier complexity while ensuring parts arrive ready for immediate use.
In short: precise, repeatable and ready for industry
Outside micrometers deliver micrometre-level accuracy for external measurements, offering durable construction, ergonomic one-handed handling and modern digital options for straightforward data capture. Metav’s selection covers the spectrum from workshop checks to final inspection.
FAQ
What accuracy can I expect from outside micrometers?
Outside micrometers in this category provide measurement resolution and repeatability down to 0.001 mm, making them suitable for high-precision tasks in toolmaking, automotive and quality assurance.
When should I choose a digital micrometer over an analogue one?
Choose a digital micrometer if you require fast data logging and traceability; digital models in the Metav assortment often include IP protection against coolants and a data interface for wireless quality-data transfer.
Are there micrometers suitable for soft or delicate surfaces?
Yes. Models with specialised anvils and adjustable measuring faces—some fitted with tungsten carbide measuring faces or interchangeable spindles—allow measurement of delicate surfaces while maintaining accuracy.
Can outside micrometers be operated with one hand on the shop floor?
Many outside micrometers are designed for one-handed operation, using the frame and thumb control on the thimble so the other hand can stabilise the workpiece during measurement.
How does the ratchet stop improve measurement consistency?
The ratchet stop ensures a uniform measuring force for each reading; combined with the rigid frame and spindle lock, this produces highly reproducible results across different operators.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com