High-precision micrometers for exact external diameter measurement
Bügelmicrometers, also known as micrometers or outside micrometers, are engineered for the precise determination of external diameters, material thicknesses and shaft dimensions in metalworking and quality assurance, delivering repeatable results down to 0.001 mm with a defined measuring force. Their robust frame prevents deflection while the integrated ratchet ensures consistent contact pressure, making them ideal for in-process checks at the machine or final inspection in the metrology lab; available variants include analogue, digital and carbide-tipped measuring faces for different surfaces and applications. The design enables one-handed operation via the frame while the thimble and ratchet provide fine adjustment and secure locking of the spindle, supporting efficient handling of small or awkward parts. Suitable for toolmaking, automotive production and industrial quality control, these micrometers combine stiffness, ease of use and data-capable digital options for seamless documentation.
7x Pair Universal Measuring Attachments Flat Round Disc Cutting Point Thin Blade Edge - Microtech Metrology
Take advantage of a compact, versatile accessory set that expands measuring capability with seven pairs of tip geometries, optimised for universal outside micrometers; the combination of variety and precise contact surfaces supports efficient measurement workflows. Order or request advice via Metav Werkzeuge for fast procurement and application support. Universal Measuring Attachment Set — 7 pairs for universal outside micrometers by Microtech Metrology Universal Measuring Attachment Set is a compact accessory kit designed to adapt universal outside micrometers for a wide range of contact geometries in workshop and laboratory environments. Seven pairs of tip geometries Compatible with universal outside micrometers Precision contact surfaces for repeatable readings Versatile set for inspections and small-batch metrology Extend measurement reach with tailored tip geometries The set supplies seven pairs of interchangeable contacts—flat, round, disc, cutting edge, pointed, thin and knife‑edge—so standard micrometers can be adapted quickly for specific tasks. By replacing the contact face rather than switching instruments, inspection loops remain short and cycle times are reduced. The variety of tip shapes supports precise positioning on shafts, edges, recesses and thin webs, improving repeatability and reducing setup time in series inspection. Improve workflow reliability with consistent contact surfaces Each attachment is produced for consistent contact behaviour, which helps to minimise operator‑dependent variation when measuring. Where surface form or access is challenging, the nominal contact geometry determines the contact area and pressure distribution; selecting the correct tip reduces measurement error and preserves the reference standard. The result is a measurable uplift in quality assurance efficiency and fewer rejected parts due to ambiguous readings. Simple handling and clear inventory for the workshop The set groups seven distinct contact pairs in one delivery, making it straightforward to maintain an inventory of common geometries for micrometer testing and part verification. Compatibility with universal outside micrometers means there is no need for tool‑specific conversion kits. Clear labelling of each pair speeds selection during bench checks and helps standardise measurement procedures across shifts and operators. Contact Metav Werkzeuge to request the Microtech Metrology Universal Measuring Attachment Set (SKU 110750100) or to discuss the right tip choice for specific applications; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: 110750100 GTIN: 4061905458392 Manufacturer: Microtech Metrology Facts Pairs in set: 7 Items per set: 7 pairs Special features Flat, round, disc, cutting edge, pointed, thin, knife‑edge contacts Suitable for universal outside micrometers Accessory for measurement and inspection tasks FAQ Which micrometers are compatible with these attachments? The attachments are designed for use with universal outside micrometers; compatibility is confirmed for standard thread mountings and contact adaptors used in bench micrometers supplied by Microtech Metrology (SKU 110750100). What contact geometries are included in the set? The set contains seven pairs: flat, round, disc, cutting edge, pointed, thin and knife‑edge, supplied to extend the functionality of universal outside micrometers for varied measurement tasks. Can the attachments affect measurement accuracy? Attachments alter the contact geometry and therefore the contact area; using the correct tip from the Microtech Metrology set helps to reduce measurement variability and improve the repeatability of readings with universal outside micrometers. Is this set suitable for in‑process inspection on production lines? Yes. The array of contact types in the Microtech Metrology set makes it suitable for rapid changeover during short inspection cycles and for small‑batch quality checks where different part geometries occur. How many pieces are supplied in one set? One set contains seven pairs of measuring attachments (total seven pairs), referenced under SKU 110750100. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
80-95mm Three-Point External Measuring Micrometer 0.01mm Readout Carbide Faces, Ratchet, Case - Metav IndustryLine
Combine the 3‑point measuring head, carbide measuring faces and a tactile ratchet stop to secure repeatable external measurements across prism‑shaped workpieces; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. 3‑point outside micrometer M309.026 — 80–95 mm, 0.01 mm graduation (Metav IndustryLine) The 3‑point outside micrometer M309.026 is a purpose‑built precision instrument for fast, reliable external measurements of triangular and prism‑shaped components in fine mechanical and toolmaking settings. 3‑point measuring head for prism-shaped parts Measuring range 80–95 mm Graduation 0.01 mm for fine readings Carbide measuring faces with ratchet stop Precision where geometry matters This micrometer delivers consistent contact with prism‑shaped profiles thanks to its 3‑point measuring head, which seats reliably on three flank surfaces to avoid tilt and eccentricity during measurement. The instrument offers a reading of 0.01 mm and a stated accuracy of 0.008 mm, making it suitable where sub‑0.01 mm stability improves process control. The presence of carbide measuring faces increases wear resistance and keeps contact geometry stable over long production runs, which reduces the need for early rework and supports reproducible quality checks. Built for reproducible, shop‑floor use A tactile ratchet stop ensures constant measuring force, reducing operator‑induced variance and improving repeatability across successive checks. The frame is finished in a durable paint and the measuring sleeve is matt‑chrome plated, which limits glare and provides a corrosion‑resistant surface for the engraved scale. A setting gauge of 80 mm is provided for zero verification and straightforward routine checks. Delivered in a protective case, the instrument is ready for safe storage and transport between inspection points without risking damage to the precision faces. Compact range, versatile application With its 80–95 mm span the gauge falls into the compact measurement class ideal for fine mechanical work: it combines short, torsion‑resistant anvils with enough reach for many toolroom components. The design is particularly well suited to measuring three‑ or five‑sided workpieces commonly encountered in gear blanks, broached profiles and small fixtures. This balance of geometry, wear‑resistant faces and mechanical reliability makes the instrument a practical choice for small to medium series production, inspection benches and jigs where accurate external dimension control is required. Contact Metav Werkzeuge today to request the Metav IndustryLine M309.026 and discuss how its carbide faces and ratchet stop can improve measurement repeatability in your production process Technical Data Article number: M309.026 GTIN: 4054469117614 Tariff code: 90173000 Facts Measuring range: 80–95 mm Graduation / reading: 0.01 mm Accuracy: 0.008 mm Setting gauge: 80 mm Type: Analog / mechanical Special features Carbide measuring faces Ratchet stop for constant measuring force Painted frame; matt‑chrome measuring sleeve Delivered in protective case Suitable for triangular / prism workpieces FAQ How does a 3‑point measuring head improve results? A 3‑point measuring head centres on three flanks of a prism‑shaped workpiece, reducing tilt and eccentricity; the Metav IndustryLine M309.026 uses this principle to ensure the contact geometry is repeatable for reliable external measurements. What reading resolution and accuracy can be expected? The instrument provides a reading of 0.01 mm with a stated accuracy of 0.008 mm, which supports fine inspection tasks and tighter quality tolerances on small components. Is the micrometer suitable for shop‑floor use? Yes. The matt‑chrome sleeve, painted frame and carbide measuring faces combine robustness with low maintenance, and the ratchet stop reduces user variability during repeated measurements. Is the gauge supplied ready for transport and storage? The micrometer is delivered in a protective case for safe storage and transportation between inspection stations. Which parts is this micrometer intended for? The tool is optimised for triangular and prism‑shaped parts such as broached profiles, gear blanks and small fixtures; its compact 80–95 mm range is aimed at fine mechanical and toolroom applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800-900mm Digital Outside Micrometer With Friction Ratchet, Ø25mm Measuring Faces, IP65, Calibrated To ISO 17025 - Microtech Metrology
Take advantage of high-capacity range, shop-floor protection and traceable ISO 17025 calibration to keep large-part inspection reliable and auditable; the combination of robust electronics and precision mechanics ensures consistent readings across long spans. Order the outside micrometer directly via Metav Werkzeuge or ask our consultants if needed. Outside micrometer (800–900 mm range) – digital, IP65, Microtech Metrology The outside micrometer is a large-range digital micrometer designed for precise outside measurements on sizable components in workshop and production environments. IP65-rated digital micrometer head ISO 17025 calibration certificate included Large 800–900 mm measuring range Ø25 mm hardened measuring faces Measure large components with repeatable accuracy With a measuring range of 800–900 mm, this digital outside micrometer is built for long-span checks where stability and repeatability matter. The substantial frame and larger measuring faces provide improved contact stability compared with small instruments, reducing flex and ensuring a consistent measurement reference for parts such as housings, flanges or long shafts. The device combines mechanical stiffness with digital readout resolution to keep routine inspection efficient. Protected electronics for harsh industrial conditions Equipped with an IP65-rated digital head, the instrument tolerates dust and jetting water, making it suitable for shop‑floor use where coolants or particulate contamination are present. The sealed electronics preserve the display and sensor reliability, so readouts remain readable and dependable even in a busy production environment, lowering downtime associated with instrument maintenance. Calibrated and traceable for quality systems Supplied with a calibration certificate to ISO 17025 (Ilac MRA), this micrometer supports formal traceability and audit requirements. The included certificate documents measurement capability and enables integration into quality-control procedures, simplifying conformity checks and external audits. For documented inspection workflows, the calibration status reduces administrative effort while showing compliance with recognised laboratory standards. Precision mechanics for operator-independent results The instrument features a fine resolution of 0.001 mm and a stated accuracy of ±0.015 mm, paired with a ratchet stop to standardise applied measuring force. Together, these elements reduce variability from operator technique and improve reproducibility across repeated measurements. Ø25 mm measuring faces ensure a stable contact area on curved or flat surfaces, and the delivery includes setting rods for quick verification and adjustment on site. Contact Metav Werkzeuge in Emmerich for a technical consultation or to request a formal offer for the Microtech Metrology outside micrometer, and benefit from Metav’s close supply chain and calibration support Technical data Article number: 110179001 GTIN: 4061905040252 Manufacturer: Microtech Metrology Facts Measuring range: 800–900 mm Resolution: 0.001 mm Stated accuracy: ±0.015 mm Weight: 5.5 kg Protection class: IP 65 Special features Digital micrometer head ISO 17025 calibration certificate included Setting rods included Ø25 mm measuring faces Ratchet stop for consistent measuring force Large-frame design for improved stiffness FAQ What measuring range does this micrometer cover? The Microtech Metrology outside micrometer covers a measuring range of 800–900 mm and is intended for large-component outside measurements. Is a calibration certificate included with the instrument? Yes. The instrument is delivered with a calibration certificate issued to ISO 17025 (Ilac MRA), ensuring traceability and documented measurement capability. What protection does the digital head offer against shop-floor conditions? The digital head is IP65-rated, providing dust protection and resistance to water jets so the micrometer remains reliable in industrial environments. What resolution and accuracy can be expected from the micrometer? The device provides a resolution of 0.001 mm and a stated accuracy of ±0.015 mm, supported by mechanical features such as a ratchet stop for repeatable measurement force. Are accessories included for verification and setup? Yes. The delivery includes setting rods for quick verification and basic adjustment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
800-900mm Micrometer With Colour Touchscreen, Wireless/USB Output, ISO 17025 Calibrated - Microtech Metrology
Take advantage of large-range measurement, wireless data transfer and a full ISO 17025 calibration certificate to integrate high‑precision checks into production without delay; order the instrument directly via Metav Werkzeuge or consult the Metav team for specification and delivery advice. Frame micrometer — large-range 800–900 mm, Wireless + USB (Microtech Metrology) A frame micrometer designed for industrial dimensional control of large components, combining an extended measuring span with an integrated microcomputer and versatile data interfaces for seamless quality workflows. Large 800–900 mm measuring range ISO 17025 calibration certificate included Wireless and USB data output CNC-machined aluminium housing Accurate measurement over long spans for reliable quality control The 800–900 mm measuring capability places this instrument in the large‑range (500–1,000 mm) category, making it suitable for heavy‑duty components such as large housings, fixtures and assemblies where profile stiffness and repeatability matter. The combination of broad reach and substantial Ø25 mm measuring faces reduces local deformation and helps maintain a consistent contact surface over the entire span; this results in reproducible measurements even on sizeable workpieces. As a result, production checks can be consolidated with fewer instruments, improving inspection throughput and reducing handling steps. Fast digital readout and industry‑ready data handling Equipped with a 1.5" colour touchscreen and comprehensive memory and transfer options, the instrument supports efficient documentation and traceability. Onboard storage for 2000 values and a folder system simplifies batch recording, while multiple transfer modes — including Wireless connectivity and USB — enable direct integration with data‑collection software and shop‑floor systems. Optional MODBUS RTU output is available for plant‑level automation. These capabilities shorten measurement cycles, cut paperwork and enable a direct path from measurement to analysis, supporting Industry 4.0 workflows and faster decision making. Calibrated traceability and robust construction for industrial use Delivered with a full ISO 17025 calibration and accompanying calibration certificate, the instrument arrives ready for use in regulated quality environments. The solid CNC‑machined aluminium housing protects sensitive electronics and the measuring mechanism while keeping the overall instrument weight to a manageable level for workshop handling. Traceability to recognised standards reduces administrative steps before first use and gives confidence that inspection results are auditable and compliant with internal and external quality requirements. Precision and handling engineered for large components Resolution and accuracy figures ensure that this micrometer bridges practical workshop use and higher‑level inspection tasks: a reading step of 0.0001 mm supports fine display increments, while an accuracy of 0.01 mm aligns the instrument with robust industrial tolerances. The overall mass of the instrument contributes to stability during measurement and, together with the large measuring faces, lowers operator‑induced variation. Integration features such as wireless synchronisation to Microtech systems and standard data outputs mean the device can be adopted quickly into existing measurement routines and reporting chains. For specification support and delivery from Emmerich, contact Metav Werkzeuge for tailored advice on workshop integration and lead times — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical Data Article number: 110189008 GTIN: 4061905039683 Manufacturer: Microtech Metrology Weight: 5.5 kg Calibration: ISO 17025 certificate included Facts Measuring range: 800–900 mm Minimum measuring range: 800 mm Maximum measuring range: 900 mm Accuracy: 0.01 mm Resolution / display step: 0.0001 mm Measuring faces: Ø25 mm Special features Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Memory manager: 2000 values, folder system, statistics mode Measuring hub: Wireless Microtech instrument connection, 2D mode, probe mode Housing: CNC‑machined aluminium solid block Optional: MODBUS RTU data output Delivered with calibration certificate (ISO 17025) FAQ How is measurement traceability provided with this micrometer? The frame micrometer from Microtech Metrology is supplied with a full ISO 17025 calibration and an accompanying calibration certificate, ensuring traceable results suitable for formal quality records (SKU 110189008). What interfaces are available for data capture and integration? Data can be transferred via Wireless connection and USB; onboard memory and a structured folder system support offline logging before transfer to evaluation software. Is the instrument suitable for use on large machining or fabrication parts? Yes, the large‑range 800–900 mm span and Ø25 mm measuring faces are intended for sizeable components in jig, fixture and heavy machining contexts where profile stiffness and repeatability are required. What accuracy and resolution can be expected during routine checks? The device provides a display step of 0.0001 mm with an overall stated accuracy of 0.01 mm, delivering industrial‑grade precision for process control and inspection tasks. Can the micrometer be integrated into automated measurement systems? Integration is supported via wireless synchronisation features and optional MODBUS RTU for industrial connections; the instrument is designed to link with data‑collection and plant systems for automated workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
8000-9000mm Modular Bore Gauge Micrometer With Colour Touchscreen, IP65 - Microtech Metrology
Take advantage of the combination of modular transportability, industrial-grade data integration and a delivered ISO 17025 calibration certificate for reliable, reproducible measurement on very large components; order the modular outside micrometer directly via Metav Werkzeuge or request technical advice from our consultants. Outside micrometer (modular, 8–9 m range) — Microtech Metrology Outside micrometer »110160905« by Microtech Metrology is a modular, long‑range measuring instrument designed for extreme-length checks in production and assembly environments Modular construction for easy transport Sub-micron capable MICS system Wireless and USB data transfer ISO 17025 calibration certificate included IP65 protection for workshop conditions Measurement for the largest components with repeatable accuracy The modular design addresses the practical needs of measuring very large parts: with a measuring range of 8,000–9,000 mm the instrument is classified in the ultra‑long category, intended for hubs, long shafts and large housings where standard gauges cannot reach. The construction uses multiple interchangeable modules (9 modules fitted) so that long spans are assembled on site while still maintaining the required stiffness; the CNC‑machined aluminium housing and Ø50 mm measuring faces ensure a stable contact geometry over the full length. Because a traceable calibration certificate (ISO 17025) is supplied, measurement results are auditable and ready for integration into quality documentation. Seamless digital integration and data reliability Data handling is designed for industrial workflows: onboard electronics include the MICS system with a colour touchscreen display and multiple readout modes (graphic, Go/NoGo, max/min, formula and temperature correction). Connectivity supports Wireless HID, USB HID and wireless transfer to the MDS app across Windows, Android, iOS and macOS; an optional MODBUS RTU (RS‑485) output is available for PLC integration. These features convert each measurement into a transferable, storable datum — the unit’s memory manager stores up to 2,000 values with folder and statistics functions — which reduces transcription errors and speeds up process control. Designed for workshop use and harsh environments Practical aspects have been addressed for heavy‑duty use: ingress protection IP65 resists moisture and dust in shop environments, and the aluminium block body combines rigidity with manageable handling for assembly. The instrument’s measuring faces (Ø50 mm) and the modular approach mean fewer setup iterations for long components, while the robust design minimises deformation and drift during repeated runs. The unit is therefore suitable where reliable longitudinal measurement over several metres must be repeated with consistent results. Traceability, calibration and quality assurance A delivered ISO 17025 calibration certificate (Ilac MRA) accompanies the instrument, which is critical when measurements feed into documented inspection plans or regulatory records. Calibration under ISO 17025 confirms that the micrometer’s metrological chain was verified against recognised standards and that results are traceable. For production lines or specialist metrology labs this removes uncertainty about instrument readiness and shortens the path from delivery to qualified use. For integration support or to discuss how Microtech Metrology’s modular outside micrometer can be adapted to specific long‑range measurement tasks, contact Metav Werkzeuge in Emmerich for personalised technical consultation and delivery coordination. Technical Data Article number: 110160905 GTIN: 4061905039355 Manufacturer: Microtech Metrology SKU: 110160905 IP protection: IP 65 Calibration: ISO 17025 certificate included Facts Measuring range: 8,000–9,000 mm Measuring faces: Ø50 mm Modules: 9 Weight: 136 kg Display: Colour 1.5" touchscreen Special features Modular construction for transportable assembly MICS system with graphic and statistical modes Wireless and USB data transfer options Optional MODBUS RTU (RS-485) interface Memory manager: 2,000 values, folder system CNC machined aluminium housing Delivered with ISO 17025 calibration certificate FAQ What applications suit this modular long‑range micrometer? The modular outside micrometer from Microtech Metrology is engineered for long components such as shafts, large housings and pipe segments where measurements up to 9 m are required, offering repeatable contact geometry and industrial data output. Is a calibration certificate supplied and to what standard? Yes — the instrument is supplied with a calibration certificate carried out to ISO 17025, ensuring traceability and acceptance for formal inspection routines. How is measurement data exported from the device? Measurements can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, USB HID, or through an optional MODBUS RTU (RS‑485) interface for direct PLC or SCADA integration. Can the micrometer be used in dirty or humid workshop environments? Yes; the instrument is rated IP65, which protects the electronics and mechanical components against dust ingress and low-pressure water jets typically encountered in workshop settings. What support is available for integrating the micrometer into existing inspection workflows? Metav Werkzeuge provides technical consultation for adapting the Microtech Metrology modular micrometer to production and inspection processes, including advice on data transfer modes and calibration management. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
825mm Setting Gauge For Micrometer, D16, Accuracy ±9µm, Thermal Shielded - Metav IndustryLine
Take advantage of the combination of high stability, fine accuracy and thermal protection to keep micrometre gauges traceable and measurement processes reliable; order directly via Metav Werkzeuge or ask the consultants for application advice. Setting gauge for micrometres M304.321.3 — 825 mm nominal length, ±0.009 mm accuracy, Metav IndustryLine The Setting gauge for micrometres M304.321.3 is a precision reference instrument for setting and checking outside micrometres in workshop and laboratory environments, designed for long-format calibration tasks where stability and repeatability are essential 825 mm nominal length for large standards ±0.009 mm measurement accuracy Ball-ended measuring faces for repeatability Integrated thermal protection for stable readings Ensure measurement accuracy across production The gauge offers a clear basis for reliable micrometre adjustment: with a nominal length of 825 mm and a stated ±0.009 mm tolerance (equivalent to 9 µm), the instrument provides a stable reference across long spans. This level of precision supports consistent set‑up of outside micrometres, reducing variation between operators and lowering the likelihood of out‑of‑tolerance parts. The numerical specification is expressed as an objective performance parameter so that measurement uncertainty can be incorporated into quality control plans and process capability studies. Minimise thermal and contact‑induced variability Built with thermal protection and ball‑ended measuring faces, the reference is engineered to limit two common sources of error: thermal expansion and point loading at the contact. The thermally shielded design keeps readings stable in typical workshop conditions, while the spherical contact geometry (diameter 16 mm) reduces local stress and improves repeatability when setting micrometres. The instrument’s mass of 1.3 kg contributes to steady positioning on a workbench without being cumbersome to handle during routine calibration tasks. Integrate into routine calibration workflows Supplied as a robust accessory within the Metav IndustryLine portfolio, the gauge supports efficient calibration routines and traceable documentation. As a workshop reference, the device is suited to regular verification of outside micrometres and can be incorporated into ISO‑aligned internal procedures; its clear technical data simplifies the creation of test logs and measurement reports. Choosing a well‑specified standard from a recognised supplier helps maintain production continuity and underlines a commitment to precise, reproducible inspection results. For reliable long‑span micrometre calibration, select the Metav IndustryLine setting gauge M304.321.3 for its stability and fine accuracy — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M304.321.3 GTIN: 4054469116815 Customs tariff number: 90173000 Numbers / Core technical data Nominal length: 825 mm Accuracy / tolerance: ±0.009 mm Contact diameter: 16 mm Weight: 1.3 kg Special features / Materials Ball-ended measuring faces Thermal protection Category: Accessory for measuring instruments FAQ What is the primary purpose of this setting gauge? The setting gauge M304.321.3 is intended as a reference for setting and checking outside micrometres, providing a stable nominal length and defined accuracy for calibration tasks. Which measurement tolerance can be expected from the device? The instrument is specified with an accuracy of ±0.009 mm, which corresponds to 9 µm and serves as the basis for traceable micrometre adjustment. Can the gauge be used in a standard workshop environment? Yes, the gauge’s thermal protection and robust design make it suitable for routine workshop calibration and use as a bench reference. How does the ball-ended face benefit micrometre setting? The ball‑ended measuring faces (16 mm diameter) reduce local contact stress and improve repeatability when transferring a reference dimension to an outside micrometre. Who supplies and supports this product? This gauge is offered under the Metav IndustryLine range and is supported by Metav Werkzeuge for enquiries and order processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
875mm Setting Gauge for Micrometers With Thermal Shield, Accuracy ±0.009mm, Ø16mm - Metav IndustryLine
Take advantage of a long-range setting standard that combines high repeatability, a compact 1.3 kg mass for easy handling, and integrated thermal protection to reduce measurement drift; order the gauge directly via Metav Werkzeuge or consult the specialists for application advice. Setting standard for micrometers M304.321.4 — 875 mm, ±0.009 mm accuracy (Metav IndustryLine) The M304.321.4 setting standard for micrometers is designed to provide a stable reference for calibrating and setting outside micrometers across long measuring spans, with thermal protection for consistent results in workshop conditions 875 mm nominal length ±0.009 mm rated accuracy Spherical measuring faces Integrated thermal protection Precise long-range reference for reliable setups This setting standard offers a nominal length of 875 mm combined with a rated accuracy of ±0.009 mm, which supports precise adjustment of long-range micrometers and reduces rework. The long nominal dimension is paired with a modest mass of 1.3 kg, enabling stable single-handed positioning while limiting thermal gradients. The numerical specification communicates measurable performance and facilitates quality planning and inspection routines. Stable contact design reduces measurement uncertainty The gauge uses spherical measuring faces, which ensure defined contact geometry when setting the faces of outside micrometers; this design reduces sensitivity to slight angular misalignment and makes the procedure more repeatable. The inclusion of thermal protection helps to mitigate temperature-induced expansion during typical workshop operations, so the reference length remains closer to its calibrated value and traceable measurements are easier to maintain. Practical benefits for production and quality control As a workshop-grade metrology accessory from Metav IndustryLine, this setting standard streamlines routine calibration tasks and supports faster changeovers by shortening the time required to establish a reliable zero. The clear numerical accuracy and robust construction make it suitable as an in-process reference for manufacturing lines, inspection benches and measuring rooms where reproducible settings translate directly into fewer scrap parts and higher throughput. For detailed suitability checks and to discuss delivery options for the M304.321.4 setting standard from Metav IndustryLine, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange expert assistance and next steps Technical data Article number: M304.321.4 GTIN: 4054469116822 Manufacturer: Metav IndustryLine Facts Nominal length: 875 mm Accuracy: ±0.009 mm Weight: 1.3 kg Diameter (D): 16 mm Customs tariff number: 90173000 Special features Spherical measuring faces With thermal protection Accessory for setting outside micrometers eClass: 21170102 FAQ What is the primary use of this setting standard? This setting standard is used as a length reference for setting and checking outside micrometers, providing a stable datum for long-range adjustments. Which accuracy can be expected when using the gauge? The gauge is specified with an accuracy of ±0.009 mm, which defines the maximum deviation of the reference length under the stated conditions. Are the measuring faces suitable for repeatable contact? Yes, the spherical measuring faces are designed to create defined contact points and improve repeatability when setting micrometer jaws. Is the gauge intended for workshop use or laboratory calibration? The design and features such as thermal protection make it well suited for workshop and production environments as a long-range reference for routine adjustments. What documentation is provided with the gauge? Standard delivery information and identification are included; for details about calibration certificates or traceability, consult the product specification offered by Metav IndustryLine Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90-140mm Universal Bore Gauge Digital Wireless+USB, Anvils Not Included - Microtech Metrology
Take advantage of a digital micrometer that combines accurate measurement (±0.004 mm), a practical 90–140 mm measuring span and Wireless+USB data transfer; order the instrument directly via Metav Werkzeuge or contact our consultants for configuration advice. Universal outside micrometer – digital, Wireless+USB (Microtech Metrology) A Universal outside micrometer designed for workshop and production use, offering a 90–140 mm measuring span with digital data output for streamlined quality control Digital readout with high resolution Wireless and USB data output Measuring range 90–140 mm High accuracy ±0.004 mm Precision that supports reliable decision-making The Universal outside micrometer couples an extended measuring span with dependable tolerance control: a measuring range of 90–140 mm and an accuracy of ±0.004 mm make it suitable for production sampling and final inspection tasks. The device’s high-resolution readout (0.0001 mm) renders small deviations visible immediately, which shortens inspection cycles and reduces costly rework. This combination of range and precision supports consistent quality outputs in metalworking and component assembly. Efficient data capture to speed up workflows Equipped with Wireless+USB interfaces and a digital display, the instrument eliminates manual transcription and enables direct capture of measurements into data-logging or SPC workflows. Wireless transfer supports flexible bench or jig measurement, while USB provides a reliable wired option for fixed workstations. The result is fewer transcription errors and faster reporting, aiding traceability and process control across shifts and production lines. Please note that anvils are not included, allowing tailored selection of measuring faces for specific geometries. Practical build for everyday measurement tasks A robust frame and a 62 mm measuring depth combine accessibility with stability when measuring shafts, collars and stepped parts. The digital electronics are arranged for workshop resilience and rapid readout, making the device suitable for both frequent shop-floor use and controlled inspection benches. The unit’s design balances ease of handling with repeatability, supporting efficient measurement routines in small-batch and serial production environments. For product configuration, specialised accessories or purchase, contact Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and order support Technical data Article number: 115051477 GTIN: 4061905458248 ECLASS: 21170328 Digital: yes Data output: Wireless+USB Facts Measuring range: 90–140 mm Measuring depth: 62 mm Accuracy: ±0.004 mm Readout resolution: 0.0001 mm Special features Anvils not included Wireless and USB interface Digital display for fast readout Manufacturer: Microtech Metrology FAQ What measuring range does the micrometer cover? The Universal outside micrometer covers a range of 90–140 mm and is intended for external dimension checks on medium-sized components. What accuracy can be expected from this instrument? The Universal outside micrometer provides an accuracy of ±0.004 mm, suitable for routine production control and detailed inspection tasks. How are measurements exported from the device? Measurements are transmitted via Wireless+USB; the micrometer supports wireless batch transfer and a direct USB connection for stable data capture. Are measuring anvils delivered with the micrometer? No, anvils are not included. This allows selection of specific measuring faces to suit shafts, rings or other geometries. Is a calibration certificate supplied with the device? The product is supplied ready for use with factory calibration; for an accredited certificate or special calibration scope, please contact Metav Werkzeuge for options Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
900-1000mm Bench Micrometer With 1.5" Colour Touchscreen, Wireless/USB, Ø25mm Measuring Faces, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of the combination of large-range capacity, reliable ISO 17025 calibration and flexible data transfer for efficient inspection of oversized components; the robust CNC machined aluminium housing and wireless/USB connectivity support continuous production workflows. Order the micrometer directly via Metav Werkzeuge or ask the consultants for integration advice. Microtech Metrology digital micrometer 900–1000 mm — large-range electronic micrometer with wireless data The Microtech Metrology digital micrometer (900–1000 mm) is a high-capacity measuring instrument designed for large-format industrial measurements and data-driven quality control. Large 900–1000 mm measuring range Wireless and USB data output ISO 17025 calibration certificate included CNC machined aluminium housing Accurate, traceable measurement for large components Measuring long components reliably requires a device engineered for stiffness and repeatability; this micrometer’s 900–1000 mm range and specified accuracy 0.01 mm place it in the large-range class for heavy‑duty workpieces. The instrument is supplied with an ISO 17025 calibration certificate, which documents traceability and reduces setup time for quality departments. For workshop managers this means fewer rechecks and clearer acceptance criteria when handling shafts, housings or large fixtures. Seamless data flow to speed up inspection routines Integrated wireless and USB outputs, plus a comprehensive memory manager that stores 2000 values, transform manual readings into actionable data. The unit supports multiple transfer modes compatible with Windows, Android, iOS and macOS, and can operate as a HID device for direct input into measurement software. These features cut transcription errors and streamline reporting—measurable gains where traceable digital records are required for process control. Robust construction built for industrial use A solid CNC machined aluminium housing provides thermal stability and impact resistance, while the Ø25 mm measuring faces ensure contact stability across large diameters. The colour 1.5" touchscreen gives clear on‑device feedback for Go/NoGo, Max/Min and graphical readouts, simplifying use at the bench. The design balances portability with the mass needed to reduce vibration-induced measurement scatter during manual handling. Practical benefits and return on integration Choosing a calibrated, network-ready measuring instrument reduces downtime associated with manual documentation and accelerates acceptance of parts throughout production and incoming inspection. The combination of ISO 17025 calibration, reliable 0.01 mm accuracy and digital output options makes this micrometer a cost-effective upgrade for workshops seeking consistent, auditable measurement data without complex retrofits. Contact Metav Werkzeuge in Emmerich to discuss specification matching, data integration options or to request the calibration documentation; reach Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 110181108 GTIN: 4061905039690 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 900–1000 mm Accuracy: 0.01 mm Display resolution: 0.0001 mm Weight: 6.7 kg Measuring faces: Ø25 mm Special features Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Memory: 2000 values, folder system, statistics mode Functions: Go/NoGo, Max/Min, Formula, Timer, Linear and temperature correction Industrial interfaces: Wireless HID, USB HID, optional Modbus RTU (RS‑485) Housing: CNC machined aluminium solid block Calibration: ISO 17025 certificate included FAQ What measuring range does this instrument cover? The device covers a 900–1000 mm measuring range, making the Microtech Metrology digital micrometer suitable for large‑format components and fixtures. Is the micrometer delivered calibrated? Yes, the micrometer is delivered with a calibration certificate issued to ISO 17025, supplied with the instrument for immediate traceability in quality systems. Which data interfaces are available for automated logging? The instrument supports wireless transfer and USB HID; additional modes include wireless HID+mac and an optional Modbus RTU interface for RS‑485 industrial networking. How stable is the measuring contact for large diameters? The tool features Ø25 mm measuring faces and a solid CNC machined aluminium housing to maintain contact stability and reduce measurement variation on large parts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
9000-10000 mm Bench Micrometer Modular Digital Touchscreen, IP65 - Microtech Metrology
Benefit from the combination of modular construction, Industry 4.0 connectivity and ISO 17025‑calibrated accuracy to secure reliable, large‑format dimensional inspection. Order the instrument directly via Metav Werkzeuge or consult our specialists for tailored configuration. Microtech Modular Frame Micrometer 9–10 m — Sub‑micron capability and Industry 4.0 ready The Microtech Modular Frame Micrometer 9–10 m is a modular, high‑precision instrument designed for large‑component dimensional inspection and seamless process integration in industrial metrology. Modular aluminium housing for easy assembly ISO 17025 calibration certificate included Wireless and USB data transfer options Traceable, high‑precision measurement for very large components The instrument offers ISO 17025 traceability and is delivered with a calibration certificate, ensuring measurements meet recognised laboratory standards. The device provides a fine reading resolution of 0.0001 mm, supporting highly reproducible results across long spans; this capability is particularly beneficial where consistent dimensional control over metres rather than millimetres is required. With Ø50 mm measuring faces, contact pressure is distributed to reduce local deformation on heavy workpieces, while an IP65 enclosure ensures reliable operation in dustier or coolant‑prone environments. These technical choices reduce measurement uncertainty and support robust quality control in heavy machining and large‑assembly manufacturing. Streamlined data workflows for faster quality control decisions Designed for modern production environments, the micrometer integrates Industry 4.0 functionality via a patented MICS system and supports multiple data paths: wireless transfer to the MDS app (Windows, Android, iOS, macOS), Wireless HID, USB HID and an optional MODBUS RTU interface (RS‑485) for PLC connections. Onboard memory for 2,000 values, folder management and statistical modes mean fewer interruptions during inspection runs. The colour touchscreen and graphing functions (2D mode, online graphics) make trend identification and Go/No‑Go checks immediate, reducing manual logging and enabling faster decision loops on the shop floor. Modular design and solid construction for repeatable results The device employs a modular concept that facilitates transport and assembly while retaining structural rigidity essential for long‑range measurement. The main frame is a CNC‑machined aluminium block, providing a stable support that minimises thermal distortion and vibration. Patent‑protected features and a comprehensive function set—linear and temperature compensation, max/min capture and formula modes—help adapt the system to specific production tasks. Given the measuring range of 9,000–10,000 mm, this instrument sits in the ultra‑long category for dimensional inspection and is intended for applications such as large shafts, rotor assemblies and heavy fixtures where repeatability and integration into existing data systems are priorities. Contact Metav Werkzeuge to discuss configuration options for the Microtech modular frame micrometer and to arrange supply or technical specification support; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 110161005 GTIN: 4061905039362 Manufacturer: Microtech Metrology Category: Messschrauben Facts Measuring range: 9,000–10,000 mm Resolution (reading): 0.0001 mm Weight: 160 kg Measuring faces: Ø50 mm Modules: 10 Special features Modular design Colour 1.5" touchscreen Wireless + USB data output IP 65 protection ISO 17025 calibration certificate included Memory manager: 2,000 values Optional MODBUS RTU (RS‑485) CNC machined aluminium housing Patented MICS system and Industry 4.0 functions FAQ Which types of components are best measured with this instrument? Large shafts, rotors, housings and other heavy assemblies benefit most; the Microtech modular frame micrometer is designed for long‑span inspection and repeatable dimensional control over several metres. Is the micrometer supplied calibrated? Yes. The device is delivered with an ISO 17025 calibration certificate, confirming laboratory‑grade traceability for the Microtech modular frame micrometer (SKU 110161005). How can measurement data be exported for SPC or PLC systems? Data export is possible via Wireless transfer to the MDS app, Wireless HID, USB HID and an optional MODBUS RTU (RS‑485) interface for direct PLC integration. Is the system robust enough for a shop‑floor environment? The instrument features an IP65 enclosure, CNC‑machined aluminium housing and large Ø50 mm measuring faces, offering resistance to dust and coolant and providing stable contact for heavy workpieces. Can the micrometer be integrated into existing Industry 4.0 infrastructures? Yes. The patented MICS system, wireless connectivity options and optional MODBUS output are designed to integrate the instrument into modern production networks and data collection workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
925mm Setting Gauge For Micrometers With Thermal Shield, 0.01mm Accuracy, Ball Tip - Metav IndustryLine
Take advantage of the combination of ±0.01 mm accuracy, a 925 mm nominal length and integrated thermal protection for dependable micrometer set-up across long ranges — order the gauge directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Micrometer Setting Gauge M304.321.5 – 925 mm nominal, ±0.01 mm accuracy (Metav IndustryLine) The Micrometer Setting Gauge M304.321.5 is a precision reference instrument for setting and verifying external micrometers over long ranges, intended for workshop calibration benches and quality control rigs. 925 mm nominal length Accuracy ±0.01 mm Thermal protection for stable readings Ball-shaped measuring faces Reliable long-range precision for workshop and bench use The gauge sits in the Large (500–1,000 mm) class, offering a nominal length of 925 mm that bridges the gap between standard bench tools and heavy-duty long-range standards. With a documented accuracy of ±0.01 mm, the device is designed to reduce setup iterations when transferring dimensions to micrometers and other comparative instruments. The dimensional stability along its length supports repeatable reference points, which shortens inspection cycles and contributes directly to productivity gains in serial and bespoke production environments. Built to reduce thermal and handling effects Equipped with thermal protection, the reference reduces measurement drift caused by ambient temperature shifts — a common cause of error during long setups. The measuring surfaces are ball-shaped with a diameter of 16 mm, providing defined contact geometry that matches common micrometer anvils and minimises point deformation. At a mass of 1.5 kg, the gauge balances manageable handling with the stiffness required to maintain alignment during transfer measurements, helping to avoid artefacts introduced by flex or uneven support. Practical integration and traceable identification Constructed as an accessory for calibration tables and inspection stations, the gauge is supplied as a clearly identified reference with trade identification for inventory and traceability. The Metav IndustryLine designation signals compatibility with workshop workflows and stock systems; the compact footprint and robust contact geometry make the device well suited for repetitive setting tasks in mechanical workshops and calibration areas. For application advice or specification matching, Metav’s specialists can provide targeted information to ensure the reference fits existing micrometer families and inspection procedures. For reliable long-range micrometer setup, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine micrometer setting gauge M304.321.5 or to discuss application-specific adjustments Technical Data SKU: M304.321.5 GTIN: 4054469116839 eClass: 21170102 Customs tariff: 90173000 Facts Nominal length: 925 mm Accuracy: ±0.01 mm Weight: 1.5 kg Measuring face diameter: 16 mm Special features Thermal protection Ball-shaped measuring faces Category: Accessories – metrology Brand: Metav IndustryLine FAQ What length does the gauge cover? The Micrometer Setting Gauge M304.321.5 provides a nominal length of 925 mm, placing it in the Large (500–1,000 mm) class for long-range setting tasks. What accuracy can be expected when using this reference? The specified accuracy for the gauge is ±0.01 mm, enabling precise transfer of dimensions to external micrometers and comparative instruments. What type of measuring faces does the gauge use? The device uses ball-shaped measuring faces with a contact diameter of 16 mm, chosen to match common micrometer anvils and reduce local deformation. Is the gauge suitable for workshop and calibration-bench use? Yes; the Micrometer Setting Gauge M304.321.5 is designed for workshop calibration benches and quality-control setups where stable, repeatable long-range settings are required. How does the gauge handle thermal influences during measurements? Built-in thermal protection helps to reduce measurement drift caused by temperature changes, improving stability for routine setting operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
975mm Setting Gauge For Micrometer, Thermal Protection, Ball Tip, Accuracy ±10µm - Metav IndustryLine
Take advantage of the combination of high repeatability, generous reach and thermal protection for dependable micrometre setting across large components; order the setting gauge directly via Metav Werkzeuge or contact our consultants for tailored advice. Setting gauge for micrometres by Metav IndustryLine — 975 mm, 0.01 mm accuracy Setting gauge for micrometres designed as a long-range reference standard for setting external micrometres in workshop and inspection environments 975 mm nominal length for large assemblies 0.01 mm (10 µm) accuracy for consistent settings Spherical measuring faces for reproducible contact Integrated thermal protection to reduce error sources Reliable calibration for large-range micrometre set-up This long-range reference is intended to simplify the transfer of a defined nominal dimension into external micrometres used in jigs, fixtures and component inspection. With a nominal length of 975 mm and an indicated accuracy of 0.01 mm (equivalent to 10 µm), the gauge supports repeatable settings over distances where shorter standards lose stiffness. The spherical measuring faces ensure a defined contact geometry that reduces tilt and local deformation at the contact points, while the moderate mass of 1.6 kg balances stability with manageable handling. For production environments, the combination of reach and resolution reduces setup time and improves first‑pass yield by making micrometre adjustments quicker and more reliable. Minimise thermal influence and handling errors Thermal expansion is a common source of measurement drift on long setting standards. The built‑in thermal protection reduces the effect of ambient temperature changes during handling and short bench‑time transfers, helping to keep the reference dimension stable. The constructive choices emphasise usability: spherical contact faces and a compact profile make it easier to seat the gauge precisely against a micrometre anvil, while the reduced susceptibility to thermal shift lowers the need for repeated rechecks. In practice, the result is fewer interruptions for re‑setting and a smoother workflow in metrology benches and production control stations. Seamless workshop integration and traceability Designed as an accessory for metrology departments, the reference supports established setting routines and is straightforward to incorporate into existing calibration chains. The gauge is supplied with a clear identification (SKU M304.321.6) and is suitable for use where a long, rigid reference is required to set external micrometres. By reducing adjustment variability through geometry and thermal mitigation, inspection cycles become more efficient and measurement uncertainty is easier to control. Where traceability is required, the accompanying documentation describes the declared accuracy and the intended use case so that the standard can be included in routine quality records. For expert advice on selecting the correct long‑range setting gauge or to reserve the Metav IndustryLine setting gauge for micrometres (975 mm, 0.01 mm), contact Metav Werkzeuge for a consultation and procurement support Technical Data Article number: M304.321.6 GTIN: 4054469116846 Tariff number: 90173000 Facts Nominal length: 975 mm Accuracy / resolution: 0.01 mm (10 µm) Weight: 1.6 kg Category: Accessory for metrology Special features Spherical measuring faces Thermal protection included Intended for setting external micrometres Label: Einstellmaß for micrometres, D = 16 mm FAQ What is the declared accuracy and what does it mean in practice? The declared accuracy of 0.01 mm (10 µm) means the reference is suitable for transferring a nominal dimension with that order of repeatability; the setting gauge is therefore appropriate for workshop and routine inspection tasks where micrometre adjustments require reliable 10 µm steps. Can this reference be used to set any external micrometre? Yes, the setting gauge is intended for setting external micrometres and is constructed with spherical measuring faces to give reproducible contact geometry when transferring the 975 mm reference dimension. How does the thermal protection help during normal use? The integrated thermal protection reduces short‑term dimension shifts caused by temperature differences between the gauge and the micrometre or bench, improving stability while handling and shortening the time needed to reach a stable measurement condition. Is the gauge suitable for large assemblies and fixtures? With a nominal length of 975 mm the gauge belongs to the large‑range class (500–1,000 mm) and is designed for setting micrometres that will be used on larger components, assemblies and fixture checks where extended reach and stiffness are required. What documentation accompanies the product? The setting gauge is supplied with product identification and specification details that support its integration into calibration and inspection procedures; SKU M304.321.6 is indicated for traceability and record‑keeping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø20mm Anvil, Round-Head Accessory - Microtech Metrology
Take advantage of a dish-shaped anvil with a Ø20 mm measuring face for consistent reference points and repeatable results; its compact geometry supports stable contact and simple integration into inspection setups. Order the anvil directly via Metav Werkzeuge or consult our specialists for specification matching and delivery. Anvil, dish-shaped – Ø20 mm measuring face by Microtech Metrology An anvil designed as a dish-shaped measuring accessory for measuring instruments, providing a defined contact area for inspection and calibration tasks. Dish-shaped anvil, Ø20 mm measuring face Precision-machined measuring surface for repeatability Accessory for measuring instruments and test fixtures Compact geometry for stable reference contact Consistent reference for repeatable measurements The dish-shaped design creates a defined contact geometry that reduces variation when establishing a datum point on shafts, rings or small components. A single Ø20 mm measuring face provides a clear, repeatable reference area, which is especially useful when multiple operators or instruments are involved. By limiting contact to a stable, central surface, the accessory reduces ambiguous seating and helps maintain measurement consistency across inspection runs. Integration into inspection workflows and fixtures As an accessory for test benches and measuring instruments, the component is suitable for straightforward replacement in fixtures where a compact datum is required. Its form factor supports rapid set-up in repetitive control sequences and helps shorten cycle times in small-batch inspection. The result is improved throughput and lower rework rates because the defined measuring surface simplifies alignment and reduces operator interpretation during routine checks. Robust handling and compatibility in the workshop The compact, dish-shaped geometry keeps the part easy to handle and position on comparators, micromanipulators or custom jigs; its尺寸 minimises obstruction around the measurement point while maintaining a reliable seating area. The product from Microtech Metrology is conceived as a practical workshop accessory that prioritises clear reference contact and operational ease, supporting standardised measurement procedures without adding complexity to the toolset. Contact Metav Werkzeuge for the Ø20 mm dish-shaped anvil from Microtech Metrology to confirm compatibility with existing fixtures and to secure a reliable measurement reference for production and quality control Technical data Article number: 110750020 GTIN: 4061905458408 Manufacturer: Microtech Metrology Facts Measuring face diameter: Ø20 mm Shape: dish-shaped anvil Category: Accessory for measuring instruments Special features Precision-machined measuring surface Compact geometry for stable contact Suitable for use as a datum in inspection setups FAQ What is the primary use of this dish-shaped anvil? The dish-shaped anvil is intended as an accessory datum for measuring instruments and fixtures; the Ø20 mm measuring face provides a repeatable contact area for inspection and alignment when using the Microtech Metrology anvil (SKU 110750020). Which instruments is the anvil compatible with? The anvil is compatible with comparators, test fixtures and measuring benches that accept accessory anvils; the Microtech Metrology dish-shaped design is intended for use where a compact, defined reference surface is required. Is the measuring face suitable for small-diameter components? Yes. The Ø20 mm measuring face concentrates contact in a central area, making it appropriate as a reference on shafts, rings and other small components where a defined seating is needed. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Ø35mm Anvil, Dome Top, Microtech Metrology
Take advantage of a compact measuring accessory that combines a defined measuring face Ø35 mm with robust repeatability and simple integration into inspection setups. The result is improved measurement reliability and faster fixture alignment — order the accessory via Metav Werkzeuge or consult our specialists for application advice. Anvil — measuring instrument accessory with a Ø35 mm measuring face by Microtech Metrology The Anvil is a compact accessory for measuring instruments, designed to provide a stable, circular measuring face Ø35 mm for support, contact and fixture applications in inspection stations and test rigs. Measuring face Ø35 mm Compact accessory for measuring instruments Manufacturer: Microtech Metrology Stable contact for repeatable measurements A clearly defined measuring face Ø35 mm ensures consistent contact geometry and contributes directly to improved repeatability of manual and semi‑automated checks. The circular contact surface reduces local deformation on small parts and helps to maintain a uniform contact pressure during successive measurements. For production and quality‑control environments, this translates to fewer remeasurements, reduced scrap and a measurable gain in throughput. Simple integration shortens setup times The compact format is tailored for use as an accessory in inspection jigs and measuring fixtures, enabling straightforward seating or attachment without complex adapters. The concise geometry of the component eases alignment and reduces fixturing time during batch inspections. As a result, inspection cycles become more efficient while retaining a focus on precision, making the unit suitable for workshop and small‑series metrology tasks. Reliable identification and traceability for process control The product is supplied with a clear SKU and GTIN for inventory and traceability purposes, facilitating orderly stock keeping and documentation within quality systems. When used as part of a calibration or inspection routine, the accessory helps maintain consistent measurement conditions, supporting process control and auditability in regulated production lines. Practical benefits for workshop and inspection use The accessory’s uncomplicated geometry makes cleaning and visual inspection simple, lowering maintenance effort between shifts. Its role as a fixed contact surface supports reproducible inside, outside or step measurement set‑ups when combined with appropriate gauges and fixtures. Sourcing through a specialist distributor adds a layer of quality assurance, helping to align the accessory with workshop needs and supply reliability. Request the Microtech Metrology anvil (SKU 110750035) via Metav Werkzeuge for robust fixture support and efficient inspection routines — Metav’s Emmerich team can advise on application and delivery, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Product name: Anvil (Amboss) Article number: 110750035 GTIN: 4061905459184 Manufacturer: Microtech Metrology Category: Measuring instruments — accessories Facts Measuring face diameter: 35 mm SKU: 110750035 Asset image: 110750020-main.png Special features Accessory for measuring instruments and fixtures Compact geometry for easy alignment Supplied for integration into inspection setups FAQ What is the diameter of the measuring face? The measuring face has a diameter of 35 mm and is identified on the product as the Anvil (SKU 110750035) from Microtech Metrology. Is this accessory suitable for fixture use in small inspection stations? Yes, the Anvil is intended as an accessory for measuring instruments and is designed to simplify seating and alignment in inspection jigs and fixtures. How is the product identified for inventory and traceability? The accessory is supplied with SKU 110750035 and GTIN 4061905459184 for straightforward stock control and documentation in quality systems. Can the component be cleaned easily between uses? The simple geometry of the measuring face facilitates quick visual inspection and routine cleaning, supporting continuous operation in workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Measure external diameters to micrometre precision
Outside micrometers (also known as micrometer screw gauges) are the reference tool when dimensional tolerances leave no room for compromise. With measurement accuracy down to 0.001 mm, these instruments determine outside diameters, material thicknesses and shaft sizes with repeatable results, whether at the machine, on the shop floor or in a controlled metrology room.
How these micrometers deliver reliable readings in practice
Technically, an outside micrometer uses a finely threaded spindle and a fixed anvil; the spindle advance is controlled by a thimble and a ratchet stop, which together ensure a consistent measuring force. The robust frame resists bending during use, while a spindle lock fixes the measured value for reading. Variants range from classic analogue models with vernier or nonius scales to digital versions with IP protection against coolants and an integrated data interface for wireless transfer of quality data. Options include models with tungsten carbide measuring faces, interchangeable spindles and specialised sizes for hard-to-fix components.
Practical advantages that save time and reduce scrap
- Consistent, repeatable measurements thanks to the ratchet stop and rigid frame.
- High resolution of 0.001 mm for micrometre-level quality control.
- One-handed operation via the frame allows simultaneous handling of awkward or small parts (one-handed operation).
- Quick data capture and traceability with digital models featuring a data interface.
- Durable measuring faces and spindle lock for long-term stability (tungsten carbide measuring faces).
Why Metav is the practical choice for your workshop
Metav combines decades of precision expertise with a comprehensive range for industry and trade. From analogue micrometers to advanced digital versions, the Metav assortment acts as a quality filter for the European market, supplying reliable instruments from stock in Emmerich. With a broad catalogue and proven service, Metav reduces supplier complexity while ensuring parts arrive ready for immediate use.
In short: precise, repeatable and ready for industry
Outside micrometers deliver micrometre-level accuracy for external measurements, offering durable construction, ergonomic one-handed handling and modern digital options for straightforward data capture. Metav’s selection covers the spectrum from workshop checks to final inspection.
FAQ
What accuracy can I expect from outside micrometers?
Outside micrometers in this category provide measurement resolution and repeatability down to 0.001 mm, making them suitable for high-precision tasks in toolmaking, automotive and quality assurance.
When should I choose a digital micrometer over an analogue one?
Choose a digital micrometer if you require fast data logging and traceability; digital models in the Metav assortment often include IP protection against coolants and a data interface for wireless quality-data transfer.
Are there micrometers suitable for soft or delicate surfaces?
Yes. Models with specialised anvils and adjustable measuring faces—some fitted with tungsten carbide measuring faces or interchangeable spindles—allow measurement of delicate surfaces while maintaining accuracy.
Can outside micrometers be operated with one hand on the shop floor?
Many outside micrometers are designed for one-handed operation, using the frame and thumb control on the thimble so the other hand can stabilise the workpiece during measurement.
How does the ratchet stop improve measurement consistency?
The ratchet stop ensures a uniform measuring force for each reading; combined with the rigid frame and spindle lock, this produces highly reproducible results across different operators.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com