High-precision micrometers for exact external diameter measurement
Bügelmicrometers, also known as micrometers or outside micrometers, are engineered for the precise determination of external diameters, material thicknesses and shaft dimensions in metalworking and quality assurance, delivering repeatable results down to 0.001 mm with a defined measuring force. Their robust frame prevents deflection while the integrated ratchet ensures consistent contact pressure, making them ideal for in-process checks at the machine or final inspection in the metrology lab; available variants include analogue, digital and carbide-tipped measuring faces for different surfaces and applications. The design enables one-handed operation via the frame while the thimble and ratchet provide fine adjustment and secure locking of the spindle, supporting efficient handling of small or awkward parts. Suitable for toolmaking, automotive production and industrial quality control, these micrometers combine stiffness, ease of use and data-capable digital options for seamless documentation.
75-100mm External Micrometer Ratchet Stop, Calibration Certificate ISO17025 - Microtech Metrology
Take advantage of 0.003 mm accuracy, a ratchet stop for repeatable measuring pressure and a delivered ISO 17025 calibration certificate to secure traceable results; order directly from Metav Werkzeuge or consult the technical team for specification support. Microtech Metrology Micrometer 75–100 mm — 0.003 mm accuracy, ratchet stop The Microtech Metrology micrometer is an analogue outside micrometer engineered for precise external measurements in production environments and quality control. High accuracy to 0.003 mm Ratchet stop for repeatable pressure Supplied with ISO 17025 calibration certificate Traceable precision that reduces rework and rejects This instrument delivers a declared measurement accuracy of ±0.003 mm combined with a display resolution of 0.01 mm, which means results are both fine-grained and reliably reproducible. The included ISO 17025 calibration certificate (Ilac MRA) ensures traceability to recognised standards and simplifies integration into laboratory quality systems; this reduces uncertainty budgets in routine checks and supports compliance in documented inspection procedures. For shops transitioning to formalised quality control, the documented calibration is a practical advantage. Consistent measurement force and robust contact geometry A built-in ratchet stop standardises the measuring force, preventing variable clamping pressure from skewing results and improving repeatability across operators. The contact area is formed by a precision anvil with a diameter of 6.5 mm, providing a stable seating for cylindrical and prismatic surfaces. The analogue screw mechanism combines tactile feedback with a mechanical scale that is quick to read and requires no batteries, making the tool immediately usable at the workbench and reducing downtime in busy production settings. Ideal applications and practical benefits in production With a measuring range of 75–100 mm, this micrometer suits medium-sized components commonly found in turned and milled parts, jigs, and assemblies. The combination of fine accuracy and rugged, battery-free operation makes it appropriate for workshop inspection, incoming goods checks and intermittent process control. Where measurement traceability and documented calibration are required by contract or internal quality plans, the instrument’s certification streamlines audit readiness and supports consistent acceptance criteria. Choose the ISO 17025‑calibrated micrometer from Microtech Metrology via Metav Werkzeuge for shop-ready, traceable precision and contact Metav Werkzeuge’s technical team for application guidance Technical data Article number: 110111001 GTIN: 4061905459146 Manufacturer: Microtech Metrology Type: Analogue outside micrometer Facts Measuring range: 75–100 mm Resolution (reading): 0.01 mm Accuracy: ±0.003 mm Anvil diameter: 6.5 mm Special features Ratchet stop for reproducible measuring force ISO 17025 calibration certificate included (Ilac MRA) Mechanical, battery-free operation FAQ What measurement accuracy does the micrometer offer? The Microtech Metrology micrometer provides an accuracy of ±0.003 mm with a reading resolution of 0.01 mm, suitable for fine workshop and quality-control tasks. Is the instrument delivered calibrated? Yes — the micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA), confirming traceability and lab-grade calibration for documented inspection routines. Which measuring range is covered by this micrometer? The tool covers the 75–100 mm range, making it suitable for medium-sized components commonly inspected in machining and assembly operations. Does the micrometer include a ratchet stop? Yes; the integrated ratchet stop ensures consistent measuring pressure and improves repeatability between operators. What is the article number if ordering or referencing the device? The micrometer is listed under article number 110111001 (GTIN 4061905459146). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Groove Measuring Anvil Micrometer 0.01mm Resolution Friction Ratchet, Supplied in Case - Metav IndustryLine
Combine high-resolution reading (0.01 mm) with a 75–100 mm measuring range and a friction ratchet for repeatable slot measurements; order the micrometer conveniently via Metav Werkzeuge or consult the specialists for application advice. M307.024 Groove Micrometer — micrometer for groove measurement, 75–100 mm, 0.01 mm by Metav IndustryLine M307.024 Groove Micrometer designed for precise slot and groove width checks in workshop and production environments, offering a mechanical reading graduated to 0.01 mm for reliable, repeatable results. 75–100 mm measuring range 0.01 mm graduation Friction ratchet for consistent contact Measuring faces 0.75 × 6.5 mm Accurate slot measurement for reliable quality control The micrometer is built for consistent, repeatable readings in slot and groove verification. With a graduation of 0.01 mm and a stated accuracy of 0.006 mm, the instrument provides the mechanical precision expected in routine inspections and incoming part checks. The spindle pitch of 0.5 mm translates spindle travel into reliable, linear advances; the non-rotating measuring spindle reduces the risk of surface scoring on narrow features while the clearly marked scale facilitates fast analogue read-off. This combination supports efficient decision making on the shop floor and minimises rework. Robust handling that suits everyday workshop use Designed as a practical measuring tool for the standard workshop length class, the instrument’s 75–100 mm range offers the best balance between reach and rigidity for general machining tasks. The friction ratchet ensures a reproducible measuring force, reducing operator-induced variation during repeated checks. Measuring faces sized 0.75 × 6.5 mm concentrate the contact area for narrow grooves without compromising stability. The mechanical construction favours durability in daily routines and straightforward maintenance, making the device a dependable choice for production and service departments. Where and how this instrument adds value This groove micrometer performs particularly well in applications requiring direct measurement of slot widths, keyways and similar narrow features in components. As an analogue, mechanical instrument it is especially suitable when a simple, robust tool is preferred over electronic alternatives. The tool supports rapid sampling and inline checks, helping to keep process throughput high while maintaining measurable quality standards. For processes that demand repeatable physical contact and proven mechanical behaviour, this micrometer is an efficient, low-complexity solution. For precise groove and slot checks, contact Metav Werkzeuge in Emmerich to discuss the M307.024 and suitable measuring strategies — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M307.024 GTIN: 4054469117294 Category: Micrometers Brand: Metav IndustryLine Type: Analog (mechanical) Core technical data Measuring range: 75–100 mm Graduation / reading: 0.01 mm Stated accuracy: 0.006 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 × 6.5 mm Tariff code: 90173000 Display: Analog (nonius) Special features Friction ratchet Non-rotating measuring spindle Intended use: groove and slot measurement Setting standard: from 25–50 mm FAQ What measuring range does this instrument cover? The M307.024 covers a measuring range of 75–100 mm, making it a standard-length micrometer suited to typical workshop tasks. What reading resolution and accuracy can be expected? This analogue micrometer offers a 0.01 mm graduation with a stated accuracy of 0.006 mm, enabling precise slot-width checks and consistent inspection results. Does the spindle rotate during measurement? No — the M307.024 features a non-rotating measuring spindle to reduce surface damage and improve repeatability when measuring narrow grooves. How does the friction ratchet benefit measurements? The built-in friction ratchet on this Metav IndustryLine micrometer ensures a constant measuring force, which reduces operator variation and enhances reproducibility for repetitive checks. Which feature sizes are suitable for contact with narrow slots? The measuring faces measure 0.75 × 6.5 mm, concentrating contact for narrow features such as keyways and grooves while maintaining stable support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Height Gauge With 35mm Measuring Faces, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high measuring accuracy together with modern data transfer and an ISO 17025 calibration certificate for reliable quality assurance in production and inspection. Order the device through Metav Werkzeuge or contact the technical consultants for detailed integration advice. Digital Micrometer 75–100 mm — Wireless + USB, 1.54" touchscreen (Microtech Metrology) The Digital Micrometer is a precision measuring instrument for bench and workshop inspection, designed for repeatable external diameter measurements in production and laboratory environments Resolution 0.0001 mm display Accuracy ±0.005 mm industrial grade Wireless + USB data output ISO 17025 calibration with certificate Consistent high precision for production control Engineered for repeatable external measurements, this digital instrument delivers ±0.005 mm accuracy and a display resolution of 0.0001 mm, making it suitable for demanding inspection tasks where traceable results matter. The combination of fine display resolution and measured accuracy reduces uncertainty in pass/fail decisions and supports statistical process control. The non-rotating spindle minimises measurement error caused by spindle rotation and contact wear, improving reproducibility across repeated checks. Modern data handling that speeds documentation Data output via Wireless+USB allows straightforward logging into quality-management systems or direct transfer to inspection software, cutting paperwork and transcription errors. The 1.54" touchscreen provides fast, unambiguous readings and simple operation in busy workstations; live digital output removes the need for manual entry, accelerating traceability and reporting. Compatibility with common data-collection workflows makes this instrument an efficient link between shopfloor measuring and digital record keeping. Robust contact faces and certified calibration for trust The measuring faces are provided as disc Ø35 mm, offering a stable contact surface for cylindrical and irregular parts while distributing contact pressure evenly. Delivered fully ISO 17025 calibrated with a certificate, the instrument supports accredited measurement chains and audit requirements. Built by Microtech Metrology, the device combines durable construction with modern electronics for long-term serviceability and dependable measurement results under routine workshop conditions. Contact Metav Werkzeuge today to discuss how the Microtech Metrology digital micrometer and its ISO 17025 certificate can be integrated into the existing inspection routine or to request a tailored quotation from our specialists Technical data Article number: 110781007 GTIN: 4061905457463 Manufacturer: Microtech Metrology eClass: 21170328 ETIM: EC003590 Facts Measuring range: 75–100 mm Accuracy: ±0.005 mm Resolution: 0.0001 mm Display: Touchscreen 1.54" Special features Data output: Wireless + USB Measuring faces: Disc Ø35 mm Non-rotating spindle Digital instrument ISO 17025 calibration with certificate FAQ What accuracy can be expected from this micrometer? The micrometer provides an industrial-grade accuracy of ±0.005 mm and a display resolution of 0.0001 mm, suitable for routine and higher-precision inspection tasks. Is a calibration certificate included with delivery? Yes, the device is supplied fully calibrated to ISO 17025 and comes with the corresponding calibration certificate for traceable measurement records. How can measurement data be exported from the instrument? Measurement values are exported via Wireless+USB, enabling integration with inspection software or direct data logging for quality documentation. Are the measuring faces suitable for cylindrical parts? The instrument features disc Ø35 mm measuring faces, which provide a broad, stable contact area ideal for many cylindrical and irregular components. Who manufactures this micrometer? The micrometer is manufactured by Microtech Metrology and distributed via Metav Werkzeuge, ensuring professional production and service standards. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer Outside Measurement 0.001mm Resolution ISO 17025 Calibrated Certificate Included - Microtech Metrology
Take advantage of the combination of 1 µm resolution, ±0.003 mm accuracy and an ergonomically controlled contact pressure via the friction thimble for consistent, repeatable external measurements. The instrument is supplied with an ISO 17025 calibration certificate, ensuring traceability and immediate use in quality control. Order the micrometer directly via Metav Werkzeuge or consult our advisors for application-specific advice. Micrometer – Microtech Metrology 75–100 mm, 0.001 mm resolution The micrometer for high-precision external measurements in precision workshops and laboratory quality control, covering the 75–100 mm range 1 µm resolution (0.001 mm) ISO 17025 calibration certificate included Friction thimble with ratchet stop Measuring range 75–100 mm Accuracy ±0.003 mm Precision that improves throughput and reduces rework This micrometer delivers 1 µm resolution combined with an ±0.003 mm accuracy class, which supports reliable pass/fail decisions in production and incoming inspection. The fine graduation and mechanical design convert smallest spindle movements into clear, repeatable indications, reducing the need for repeat checks and lowering scrap rates. Classified for compact ranges, the instrument’s 75–100 mm span places it within the Micro group of calipers and gauges, making it particularly suitable where stiffness and fine control over short spans are essential. Design features that prevent operator error and raise repeatability A friction thimble plus ratchet stop ensures consistent contact pressure and minimises variation from differing hand force, so measurements remain comparable between operators. The analogue, mechanical construction avoids electronic drift and is inherently robust in harsh workshop environments. Supplied fully calibrated to ISO 17025, the micrometer comes with a calibration certificate that documents traceability and allows immediate integration into quality routines or audit trails without additional lead time. Practical suitability for workshops and labs The instrument is intended for outside measurements in toolrooms, precision workshops and laboratory quality-control benches. Its compact Micro classification offers superior torsional stiffness over short spans, improving stability when measuring small to medium-sized components. With an anvil diameter of Ø6.5 mm, the contact geometry is adapted for reliable seating on cylindrical and flat workpieces, ensuring secure contact and consistent results during routine inspections. Contact Metav Werkzeuge for a tailored technical consultation or quotation for the Microtech Metrology micrometer (SKU 110111000); call +49 2822 7131930 or email info@metav-werkzeuge.com for specification matching and ordering assistance Technical data Article number: 110111000 GTIN: 4061905456879 Manufacturer: Microtech Metrology Facts Measuring range: 75–100 mm Resolution: 0.001 mm (1 µm) Accuracy: ±0.003 mm Anvil diameter: Ø6.5 mm Type: analogue Ratchet: yes Special features ISO 17025 calibration certificate included Friction thimble micrometer head Designed for external (outside) measurements FAQ What resolution and accuracy does this micrometer offer? The micrometer from Microtech Metrology (SKU 110111000) provides a resolution of 0.001 mm (1 µm) and an accuracy of ±0.003 mm, suitable for precise workshop and inspection tasks. Is the instrument delivered calibrated and traceable? Yes. The micrometer is delivered fully calibrated with an ISO 17025 calibration certificate, supplied with the tool for immediate use in quality-controlled environments. For which applications is the gauge best suited? This analogue micrometer is intended for external measurements in precision workshops, toolrooms and laboratory quality control within the 75–100 mm measurement span (Micro classification). How does the ratchet and friction thimble help in daily use? The ratchet and friction thimble control contact pressure and reduce operator-induced variation, improving repeatability and ensuring consistent measurement results during repetitive inspections. Is this a digital instrument? No; the instrument is an analogue micrometer with mechanical readout and a precision thimble, designed for durability and stable performance without reliance on electronics. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer Screw Gauge With Microcomputer Thread Measurement, 2.4" Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Compact precision, traceable results and seamless data capture make this digital micrometer an efficient choice for inspection and production use; the combination of ISO 17025 calibration, ±0.004 mm accuracy and wireless/USB connectivity supports reproducible workflows. Order the instrument via Metav Werkzeuge or consult their specialists for application advice. Digital Micrometer — 75–100 mm measuring range, 2.4" colour touchscreen (Microtech Metrology) The micrometer is a digital measuring instrument designed for precise external and thread measurements in workshop and inspection environments, featuring a non-rotating spindle and integrated microcomputer. ISO 17025 calibration included Measuring range 75–100 mm 2.4" colour touchscreen display Wireless and USB data output Traceable accuracy for critical dimensions The instrument delivers traceable measurement results thanks to its ISO 17025 calibration and accompanying calibration certificate, which document conformity to recognised laboratory standards. With a stated accuracy of ±0.004 mm and a reading resolution of 0.0001 mm, the device reduces uncertainty in quality control and first-off inspections, making it suitable for demanding tolerance checks and lot acceptance tests. This traceability supports auditability and simplifies documentation in regulated environments. Faster, error‑resistant data capture for modern production Integrated Wireless and USB outputs plus a 2.4" colour touchscreen enable rapid capture and transfer of measured values into inspection software or spreadsheets, cutting manual transcription errors and speeding reporting. The touch interface presents readings clearly and allows quick function selection, while the data interfaces support both mobile and PC-based workflows. The result is a measurable efficiency gain in measurement loops and simplified statistical process control. Thread and external measurement without risk of damage Equipped with a non-rotating spindle and a microcomputer tuned for thread evaluation, this instrument is optimised for external thread checks and delicate parts where spindle rotation could damage the workpiece. The supplied set of 6x anvils (0.4–7 mm) broadens the usable contact geometry for different thread forms, allowing reliable contact and consistent force application for repeatable results. Ready for workshop use and routine inspection The instrument arrives fully calibrated to ISO 17025 and includes the calibration certificate, which removes initial uncertainty and makes it ready for immediate use in production environments. Robust digital electronics and a practical measuring range of 75–100 mm cover a wide span of typical components without sacrificing handling comfort. The compact form factor and clear display support single-operator checks and bench inspection tasks alike. Contact Metav Werkzeuge to request detailed specifications or to secure the Microtech Metrology micrometer with ISO 17025 calibration and the included accessory set for integration into quality-controlled production Technical information Article number: 110711008 GTIN: 4061905456916 Manufacturer: Microtech Metrology Core specifications Measuring range: 75–100 mm Resolution (reading): 0.0001 mm Accuracy: ±0.004 mm Display: Colour 2.4" touchscreen Data output: Wireless, USB Features & accessories Non-rotating spindle ISO 17025 calibration with certificate included Included accessories: 6x anvils 0.4–7 mm (metric 60) Digital instrument with microcomputer for thread measurement FAQ What level of accuracy can be expected from this micrometer? The micrometer from Microtech Metrology offers an accuracy of ±0.004 mm and a resolution of 0.0001 mm, suitable for routine inspection and critical dimensional checks. Is the instrument delivered calibrated and documented? Yes — the device is supplied calibrated to ISO 17025 and includes the corresponding calibration certificate. Which interfaces are available for data transfer? Readings can be exported via Wireless and USB connections for integration with inspection software or data-collection systems. Can the micrometer be used for thread measurement? The integrated microcomputer and supplied anvils make the instrument well suited for external thread measurement and delicate parts; the non-rotating spindle helps prevent workpiece damage. What is the product reference for ordering and spare parts? The article number (SKU) is 110711008 and the GTIN is 4061905456916 for ordering and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer With 20mm Measuring Faces, Colour Touchscreen Display, Wireless/USB, IP65, ISO 17025 - Microtech Metrology
Take advantage of a fully calibrated precision instrument with ISO 17025 traceability, IP65 protection and wireless data transfer for streamlined quality control. The combination of high accuracy ±0.004 mm, fine resolution 0.0001 mm and a clear 1.5" colour touchscreen supports fast, reproducible measurements in the workshop. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer (75–100 mm) with 1.5" colour touchscreen — Microtech Metrology Micrometer — a precision digital measuring instrument for fine industrial and laboratory use, optimised for compact components and repeatable, traceable data capture IP65 protection for dusty and wet environments ISO 17025 calibration certificate included Wireless and USB data output for traceable transfer 1.5" colour touchscreen for clear numeric display Accurate results that cut uncertainty The micrometer delivers accuracy ±0.004 mm and a resolution 0.0001 mm, which together reduce measurement uncertainty for small to medium components. This level of performance is particularly beneficial where parts require consistent tolerances; the device’s measurement chain and electronics are designed to preserve repeatability. The supplied ISO 17025 calibration certificate guarantees traceability to recognised standards, supporting both in-house quality routines and external audits. Built to withstand workshop conditions Designed with an IP65 rating, the instrument tolerates dusty and splashing conditions common at production benches. The 20 mm measuring faces (round anvils) provide stable contact on uneven surfaces while the integrated friction ratchet prevents over‑clamping and ensures uniform measuring force. A non-rotating spindle further reduces wear on the measuring faces and supports consistent readings over extended use, extending service life and lowering total cost of ownership. Modern data handling for faster workflows Equipped with Wireless and USB data outputs, the gauge simplifies documentation and error‑free transfer of measurements into quality systems and spreadsheets. The 1.5" colour touchscreen presents readings clearly and speeds up inspection routines, reducing the time between measurement and analysis. These connectivity options help integrate the instrument into digital workflows without sacrificing the usability expected at the bench. Compact range, broad applicability With its 75–100 mm measuring span this instrument falls into the micro class of micrometers, ideal where high precision on compact parts matters most — watch components, small housings, or precision fixtures. The device balances reach and rigidity: compact construction keeps handling intuitive while delivering the stiffness required for reproducible contact measurements. The unit is therefore suited to both workshop quality control and precise bench inspection tasks. For traceable, workshop-ready precision choose Microtech Metrology’s micrometer and contact Metav Werkzeuge for personalised procurement and technical advice from our Emmerich warehouse. Technical data SKU: 110781008 GTIN: 4061905041389 Brand: Microtech Metrology Category: Micrometers ECLASS: 21170328 ETIM: EC003590 Core technical data Measuring range: 75–100 mm Resolution (reading): 0.0001 mm Accuracy: 0.004 mm Measuring faces diameter: 20 mm Display size: 1.5" colour touchscreen Special features Data output: Wireless + USB IP protection: IP65 Friction ratchet Non-rotating spindle Digital instrument (colour touchscreen) Delivered fully calibrated to ISO 17025 (calibration certificate included) FAQ What measurement range does the micrometer cover? The micrometer covers a measuring span of 75–100 mm, placing it in the micro class for compact, high‑precision tasks. Is a calibration certificate supplied with the instrument? Yes, the instrument is delivered fully calibrated and includes an ISO 17025 calibration certificate for traceable results. How are measurements transferred to a PC or database? Measurement data can be exported via Wireless connection or USB, enabling direct import into quality software and spreadsheets. Are the measuring faces suitable for irregular surfaces? The device has 20 mm round measuring faces and a friction ratchet, which together provide stable contact and consistent measuring force for small workpieces. Can this micrometer be used on a shop floor? Yes, the IP65 rating makes the instrument resistant to dust and splashing, suitable for many workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer With Ratchet, 0.01mm Reading, Powder-Coated Frame, Chrome Drum, DIN 863 - Metav IndustryLine
Take advantage of precise 0.01 mm mechanical reading and a ratchet stop for repeatable measuring force, combined with a robust powder‑coated frame and matt‑chromed drum for durable everyday use. Order the micrometer directly via Metav Werkzeuge or ask our consultants if further advice is required. M304.411 outside micrometer – 75–100 mm, 0.01 mm resolution, ratchet stop (Metav IndustryLine) The M304.411 outside micrometer is an analogue measuring instrument for external dimensions, built for workshop and production use in mechanical engineering and metalworking. Ratchet stop for consistent measuring force 0.01 mm mechanical reading accuracy Blue powder‑coated rigid frame Delivered in protective case Consistent, repeatable measurements for production settings This analogue micrometer combines a fine 0.01 mm graduation with a ratchet stop, ensuring every measurement is taken with the same contact force and therefore high repeatability. Conformance with DIN 863 provides standardised accuracy and interchangeability in inspection routines. The spindle pitch of 0.5 mm per revolution translates mechanical turns into reliable linear movement, while the ratchet prevents over‑tightening and measurement error. These technical choices favour measurable process stability in serial inspection and routine quality checks. Built to withstand daily workshop demands The frame is blue powder‑coated to resist wear and maintain visible condition in busy environments, while the measuring drum is matt‑chromed to reduce glare and improve legibility. The measuring faces are hardened, providing long service life against wear when measuring shafts, journals and finished parts. As an analogue instrument, it requires no batteries, simplifying maintenance and ensuring immediate readiness at the bench. The instrument is supplied in a protective case for safe storage and transport between workstations. Practical scope and application in quality control With a measuring range of 75–100 mm, the device covers medium external dimensions commonly encountered in component production and maintenance. The micrometer is suitable for assessing shaft diameters, bearing seats and turned components where precise external measurement is required. The instrument’s mechanical design supports fast, tactile measuring routines that integrate easily into workshop workflows; the combination of robust construction and standardised accuracy makes the M304.411 a reliable choice for both shopfloor inspection and incoming goods control. Contact Metav Werkzeuge in Emmerich for technical advice or to request the Metav IndustryLine micrometer (M304.411) with ratchet stop and 0.01 mm accuracy — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: M304.411 GTIN: 4054469116907 Manufacturer: Metav IndustryLine Standard: DIN 863 Facts Measuring range: 75–100 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm/revolution Measuring spindle diameter: 6.5 mm Special features Ratchet stop for consistent measuring force Hardened measuring faces Frame: blue powder‑coated Measuring drum: matt‑chromed Delivered in protective case Analogue mechanical instrument FAQ What measuring range does this micrometer cover? The instrument covers an external measuring range of 75–100 mm, making it suitable for medium‑sized components and general workshop inspection. How fine is the reading and how is repeatability ensured? Reading is 0.01 mm and repeatability is enhanced by the ratchet stop and the spindle pitch of 0.5 mm per revolution, which together ensure consistent contact force and reliable results. Is the micrometer suitable for production use? Yes. The M304.411 from Metav IndustryLine is designed for workshop and production environments, with hardened measuring faces and a powder‑coated frame for durability. Does the instrument require batteries or electronic calibration? No. This is an analogue micrometer and operates mechanically without batteries; calibration can be performed according to the workshop’s standard procedures. How is the micrometer supplied? The micrometer is supplied in a protective case and finished with a matt‑chromed measuring drum and powder‑coated frame for safe transport and daily handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Micrometer With Ratchet, Matte Chrome Thimble, Painted Frame, Supplied In Case - Metav IndustryLine
Take advantage of the combination of repeatable measuring force, a glare‑reducing matt‑chrome thimble and conformity to DIN 863 for dependable workshop results; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Micrometer M304.611 — 75–100 mm, ratchet thimble The Micrometer M304.611 is an outside micrometer designed for precise external measurements in fine mechanical and workshop environments, covering the 75–100 mm measuring range with a ratchet stop for constant force Ratchet stop for constant measuring force Matt‑chrome thimble for reduced glare Painted frame with robust construction Conforms to DIN 863 for measurement accuracy Reliable repeatability for production and inspection The ratchet stop and the finely graduated thimble provide consistent measuring force, which reduces variability between repeated measurements and shortens inspection cycles. With a spindle pitch of 0.5 mm and a reading step of 0.01 mm, the instrument supports routine quality checks where reproducible results are essential. The combination of mechanical simplicity and standardised design helps maintain throughput while keeping calibration intervals predictable. Durable design for daily workshop use A lacquered frame combined with a matt‑chrome thimble gives the instrument a tough exterior that resists workshop wear and reduces glare under bright inspection lighting. The robust construction is suited to frequent handling and provides stable contact pressures through the spindle and ratchet mechanism, translating to long service life and fewer interruptions for maintenance. This ensures steady performance where tools are used throughout a shift. Standard compliance and classification for correct application Built to DIN 863, the micrometer meets established requirements for measuring instruments in mechanical engineering and inspection. Its 75–100 mm range places it in the compact range for fine mechanical tasks that demand high positional control yet sufficient reach. As an analog measuring instrument, it offers tactile feedback and a straightforward adjustment concept familiar to technicians and metrology staff, facilitating rapid adoption on the shop floor. Choose the Metav IndustryLine micrometer for robust, repeatable external measurements and contact Metav Werkzeuge for tailored procurement or application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M304.611 GTIN: 4054469117164 Category: Messschrauben Standard: DIN 863 Facts Measuring range: 75–100 mm Measuring range min: 75 mm Measuring range max: 100 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Analog instrument: yes Special features Material: lacquered frame; matt‑chrome thimble Ratchet stop: yes Norm: DIN 863 Category: Messschrauben FAQ What measuring range does this micrometer cover? The micrometer covers a 75–100 mm measuring range, suitable for compact to medium external measurements. Is the instrument suitable for routine shop‑floor inspections? Yes. The ratchet stop and durable frame make the instrument well suited to repeated use in production and inspection tasks. What level of reading resolution is provided? The device provides a 0.01 mm reading step, supporting routine quality control and dimensional checks. Does the micrometer comply with any standards? The instrument is manufactured to DIN 863, ensuring conformity with common metrology requirements. Which materials are used in the construction? The frame is lacquered for resilience, while the thimble has a matt‑chrome finish to reduce glare and improve legibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Non-Rotating Digital Micrometer With Colour Touchscreen, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high-precision measurement, integrated Industry 4.0 connectivity and a robust IP65 CNC-machined aluminium housing for reliable shop-floor data capture; the micrometer is supplied with an ISO 17025 calibration certificate. Order the micrometer directly via Metav Werkzeuge or contact our consultants for system integration advice. Micrometer (digital) by Microtech Metrology — 75–100 mm range, ISO 17025-calibrated, Wireless + USB A Micrometer designed for accurate external measurements in production and laboratory environments, offering a 75–100 mm measuring range with advanced digital connectivity and industrial-grade protection. ISO 17025 calibration certificate included Wireless and USB HID data transfer IP65 CNC-machined aluminium housing 2.4" colour touchscreen display Precise, verifiable measurement that feeds production control The digital micrometer delivers high repeatability with a specified accuracy of ±0.004 mm and a fine reading increment of 0.0001 on the scale, ensuring measurable improvements in quality control. The compact anvils (6.5 x 0.75 mm) concentrate the measuring force for clear contact on small diameters, while the solid CNC-machined aluminium housing protects the measurement mechanism from shop-floor contaminants. This construction contributes to long-term stability and reduces recalibration frequency, which supports predictable production output. Seamless data integration for Industry 4.0 workflows Equipped with Microtech’s MICS system and multiple transfer modes, the instrument enables automated data collection and live monitoring. Available transfer modes include wireless connection to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC and USB HID, with an optional MODBUS RTU (RS‑485) interface for PLC-level integration. The on-board memory management stores 2,000 values with folder organisation and statistics mode, which simplifies traceability and reduces manual transcription errors—key for regulated or high-volume environments. Functional tools to speed inspection and decision-making The instrument combines practical measurement functions—Go/NoGo, Max/Min, formula evaluation, linear and temperature correction, timer and online graphical display—so measurements can be interpreted immediately at the point of inspection. The 2.4" colour touchscreen presents data and graphics clearly, accelerating operator decisions and reducing rework. These features make the device suitable not only for standalone checks but also as a node in automated measurement loops. Durable design for real-world workshop use With an IP65 rating and a chassis milled from solid aluminium, the micrometer tolerates coolant spray and fine dust typical of manufacturing environments. The robust design maintains alignment of the spindle and anvils under repeated use, helping to keep measurement uncertainty low across long production runs. The supplied ISO 17025 calibration certificate (Ilac MRA) documents traceability and supports internal quality audits and customer confidence. Practical benefits for procurement and integration Choosing this digital micrometer reduces manual logging, accelerates throughput and simplifies audit trails. The device’s compatibility with common data protocols and the optional industrial interface mean that it can be integrated into statistical process control systems without bespoke software development. This rational approach to measurement improves inspection efficiency and supports continuous improvement strategies on the shop floor. Contact Metav Werkzeuge today for advice on integrating the Microtech Metrology digital micrometer into existing inspection routines or for assistance with tailored data-output configurations Technical Data Article number: 110661008 GTIN: 4061905457296 Manufacturer: Microtech Metrology SKU: 110661008 Display: Colour 2.4" touchscreen Protection class: IP 65 Facts Measuring range: 75–100 mm Reading increment: 0.0001 Accuracy: 0.004 Memory capacity: 2,000 values Anvil dimensions: 6.5 x 0.75 mm Special features CNC-machined aluminium housing Wireless MICROTECH instrument connection and synchronization MICS system: On-line Graphic, Analog scale, Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction Measuring HUB: 2D mode, 2D Graph, Probe mode, Compensation Data transfer modes: Wireless to MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC, USB HID Optional MODBUS RTU (RS-485) for industrial connections Calibration certificate included (ISO 17025 (Ilac MRA)) FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 75–100 mm, suitable for medium-sized external measurements in production and laboratory settings. Is a calibration certificate supplied with the instrument? Yes, the micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA) documenting traceability and supporting quality management requirements. Which data output options are available for automated logging? Data transfer options include wireless connection to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC, USB HID and an optional MODBUS RTU (RS‑485) interface for PLC integration. How does the device perform in harsh workshop environments? The micrometer features an IP65 rating and a CNC-machined aluminium housing, offering resistance to dust and spray and ensuring robust operation on the shop floor. Can the instrument store measurement series locally? Yes, the micrometer’s memory manager holds up to 2,000 values with a folder system and statistics mode to simplify traceability and export. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Precision Micrometer Digital IP65, Ø12mm Measuring Faces - Microtech Metrology
Take advantage of the combination of a digital readout with 0.001 mm resolution, robust IP65 protection and a 0.006 mm accuracy for repeatable internal measurements; order via Metav Werkzeuge or consult the Metav team for application advice. Digital internal micrometer (75–100 mm) by Microtech Metrology The Digital internal micrometer is a precision instrument for measuring internal diameters in fine mechanical and workshop environments, covering the 75–100 mm range with a protected electronic display. *Digital readout with 0.001 mm resolution *IP65 dust and splash protection *Measuring range 75–100 mm for internal diameters *Ø12 mm hardened measuring faces Reliable measurements in demanding workshop conditions The instrument combines a protected IP65 housing with a finely tuned drive mechanism to deliver consistent results even where coolant mist or workplace dust is present. With an indicated accuracy of 0.006 mm and a display resolution of 0.001 mm, the device reduces reading uncertainty and speeds up inspection routines. The sealed electronics preserve display reliability and extend service intervals, which supports continuous production checks without frequent interruptions. Optimised for small to medium internal bores With a measuring span of 75–100 mm, this tool is classified in the micro range and is particularly suited to compact components and precise internal diameters encountered in watchmaking, valve seats and bearing housings. The Ø12 mm measuring faces provide a stable contact area for repeatable seating in bores, improving concentric measurement stability. This combination of range and contact geometry balances reach with stiffness, making it straightforward to obtain reproducible results on small assemblies. Clear digital handling for efficient quality control The electronic readout delivers a prompt numeric result, eliminating parallax errors common to purely mechanical gauges. The digital display with 0.001 mm steps facilitates quick sorting decisions on the shop floor and reduces documentation time during batch inspections. Together with the micrometer’s robust ingress protection, the readout supports reliable use in production, incoming inspection and maintenance settings where fast, unequivocal measurements are required. Practical applications and workshop integration Typical applications include bore gauging, internal diameter checks on assemblies and pass/fail inspections in small-to-medium sized components. The device’s construction and accuracy make it a pragmatic choice for laboratories and machine shops seeking a compact measuring tool that fits established inspection fixtures without the overhead of specialised bench equipment. Integration into existing workflows is straightforward because the unit provides direct numeric feedback and a measurement range that covers many common internal tolerances. For tailored advice or to purchase the Microtech Metrology digital internal micrometer, please contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — the Metav team will help confirm suitability and delivery options. Technical Data SKU: 133801001 GTIN: 4061905458125 eClass: 21170328 Manufacturer: Microtech Metrology Facts Measuring range: 75–100 mm Accuracy: 0.006 mm Resolution / display: 0.001 mm Protection class: IP65 Measuring faces diameter: Ø12 mm Design & Features Digital internal micrometer Category: Micrometers (internal) Electronic display Robust ingress protection for shop use FAQ What measurement range does this instrument cover? The digital internal micrometer covers a measuring range of 75–100 mm, suitable for compact internal diameters and micro‑range inspection tasks. What accuracy and resolution can be expected? The instrument offers an accuracy of 0.006 mm and a display resolution of 0.001 mm, providing fine graduation for precise internal measurements. Is the device suitable for use in damp or dusty environments? Yes, the device is rated IP65, which provides protection against dust ingress and low‑pressure water jets, making it suitable for many workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Precision Micrometer With Colour Touchscreen, Wireless USB, IP65 - Microtech Metrology
Benefit from high-precision measurement, robust ingress protection and seamless data transfer for efficient quality control. Combine the accuracy 0.004 mm, Wireless + USB output and IP65 sealing for reliable on‑site and lab use. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Microtech Micrometer — digital micrometer, 75–100 mm, IP65, 2.4" touchscreen The Microtech Micrometer is a digitally measured micrometer designed for precise workshop and laboratory measurements across a 75–100 mm range. High precision ±0.004 mm accuracy Integrated Wireless + USB output Robust IP65 protection Colour 2.4" touchscreen display Precision where repeatability counts The instrument delivers substantial measurement reliability thanks to its accuracy 0.004 mm and high-resolution reading of 0.0001 mm, which together reduce uncertainty in routine inspection tasks. This level of precision supports repeatable results when checking components with tight tolerances and enables confident go/no-go decisions in production. The solid measuring faces (Ø12 mm) maintain consistent contact geometry for each reading, limiting variability introduced by changing contact conditions. Seamless data capture for process control Equipped with Wireless + USB outputs and a clear 2.4" touchscreen, the device simplifies data logging and process documentation. Measurements can be transmitted directly to inspection software or a laptop for traceable records, reducing transcription errors and speeding up reporting. Integration into existing quality workflows is straightforward, making the instrument suitable for traceable inspection routines and batch control where documented evidence is required. Built for workshop durability and continuous use The unit’s IP65 rating protects the electronics against dust and water jets, which extends operational life in harsher workshop environments. The robust construction means fewer interruptions for maintenance and reliable performance on the shop floor. The digital electronics and sealed enclosure also contribute to lower service frequency compared with purely analogue instruments, promoting sustained availability for production-critical measurement tasks. Practical handling and measurement versatility Operating ergonomics are tuned for regular use: the digital display is legible and responsive, and the compact form factor supports comfortable one‑hand measurement across the measurement range 75–100 mm. The instrument’s measuring faces of Ø12 mm give a stable contact area for consistent pressure distribution. As a digitally driven micrometer, it reduces operator influence on readout interpretation and helps maintain throughput during repetitive inspection cycles. For detailed technical advice on the Microtech Micrometer or to discuss integration into an existing inspection line, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants provide specification guidance and delivery options tailored to professional requirements. Technical data Article number: 133801008 GTIN: 4061905457982 Manufacturer: Microtech Metrology Facts Measurement range: 75–100 mm Accuracy: 0.004 mm Reading: 0.0001 mm Display: Colour 2.4" touchscreen Protection class: IP65 Special features Data output: Wireless + USB Measuring faces: Ø12 mm Instrument type: Digital micrometer Digital: yes FAQ What measurement range does this micrometer cover? The micrometer covers a 75–100 mm range, suitable for medium‑sized component checks and workshop inspection tasks. How accurate is the instrument for inspection work? With an accuracy of 0.004 mm and a reading step of 0.0001 mm, the instrument meets the demands of precision quality control in production and lab environments. Can measurement data be exported directly to inspection software? Yes, the device offers Wireless + USB outputs for direct data transfer to PCs or data loggers, facilitating digital record keeping. Is the micrometer suitable for harsh workshop conditions? The IP65 rating provides dust and water‑jet protection, making the instrument durable for routine shop‑floor use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Thread Micrometer Digital Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise thread inspection, modern data transfer and certified calibration to streamline quality control and record-keeping; the combination of high resolution, a non‑rotating spindle and ISO 17025 calibration ensures reproducible results and traceable documentation. Order the thread micrometer directly via Metav Werkzeuge or ask our consultants if needed. Thread micrometer Whitworth 55 — Microtech Metrology, Colour 2.4" touchscreen & Wireless+USB The thread micrometer Whitworth 55 is a compact, workshop-ready instrument for accurate measurement of Whitworth threads between 75 and 100 mm, designed for calibrated quality control in production and inspection environments ISO 17025 calibration included certificate Colour 2.4" touchscreen display Wireless and USB data output High precision: 0.004 mm accuracy Accurate thread control for repeatable results This instrument delivers a measurable advantage where repeatability matters: the non‑rotating spindle minimises disturbance to threaded profiles, reducing measurement scatter on delicate Whitworth threads. With a stated accuracy of 0.004 mm and a readout resolution of 0.0001 mm, the device suits fine inspection tasks in the compact "Micro" class (measurement range up to 100 mm), where stiffness and handling are balanced for small to medium components. The robust mechanical concept combined with the electronic readout supports reliable process control and fewer reworks in small-batch production. Fast digital capture to simplify quality workflows Equipped with a Colour 2.4" touchscreen and dual data interfaces, the instrument speeds the transfer of measurement records into a laboratory database or a shop‑floor logging system. Wireless transfer and USB connectivity reduce manual transcription errors and allow secure archiving of results for traceability. The clear touch display shortens operator training time and enables rapid checks during set‑up or final inspection. As a result, inspection routines become both faster and more transparent — an advantage for busy quality teams seeking to tighten tolerances without adding complexity. Calibrated delivery and thread‑specific accessories The micrometer is supplied fully calibrated to ISO 17025 with an accompanying calibration certificate, allowing immediate use in accredited quality procedures and audit trails. Delivery includes 10x anvils 60‑3.5 TPI (Whitworth 55), which match the Whitworth standard and remove the need for immediate additional tooling. The instrument’s configuration is therefore suitable for workshop use and for integration into formal inspection plans where documented measurement capability is required. For precision purchases aligned with industrial standards, contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110721008 GTIN: 4061905457265 Manufacturer: Microtech Metrology Type: Whitworth 55 Measurement range: 75–100 mm Accuracy: ±0.004 mm Numbers / Core technical data Readout resolution: 0.0001 mm Measurement range min: 75 mm Measurement range max: 100 mm Special features Colour 2.4" touchscreen display Wireless + USB data output Non‑rotating spindle (prevents thread damage) Digital instrument (electronic readout) Delivered with 10x anvils 60‑3.5 TPI (Whitworth 55) Supplied calibrated to ISO 17025 with certificate FAQ How precise is the instrument for thread inspection? The thread micrometer delivers an accuracy of ±0.004 mm and a readout resolution of 0.0001 mm, suitable for fine inspection of Whitworth threads in production and quality control. Is a calibration certificate supplied with the micrometer? Yes — the instrument is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceable measurement records. Which data interfaces are available for documentation? Data transfer is possible via Wireless and USB interfaces to support digital logging and simplified transfer into inspection software. Are specific anvils included for Whitworth threads? The delivery includes 10x anvils 60‑3.5 TPI matched to Whitworth 55, enabling immediate use for the intended thread form without additional accessories. What advantages does the non‑rotating spindle offer? The non‑rotating spindle reduces damage and measurement variability on threaded profiles, improving repeatability when assessing thread parameters. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Tolerance Bore Micrometer Digital Fine-Indicator, IP54, Delivered In Case - Filetta
Benefit from ±0.005 mm accuracy, 0.001 mm resolution and robust IP54 protection for reproducible shop‑floor measurements; order the tolerance micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Tolerance Micrometer MS910.505 — digital fine indicator, IP54, rechargeable The Tolerance Micrometer MS910.505 is a precision micrometer designed for accurate tolerance checks in workshop and inspection environments, offering a fine digital readout with mm/inch selection and splash protection. IP54 protection for workshop conditions Accuracy ±0.005 mm for reliable tolerances Rechargeable lithium battery with mm/inch display Supplied with adjustment standard and digital fine indicator Precision where it counts: reliable tolerance control The compact instrument delivers a resolution of 0.001 mm and an accuracy of ±0.005 mm, providing traceable results for routine quality checks and first‑article inspections. The small, hardened measuring faces with a diameter of Ø6.5 mm concentrate contact force into a stable, repeatable point; combined with a specified measuring force of 5–10 N, this reduces variability from operator pressure and supports consistent pass/fail decisions. The digital readout with mm/inch selection simplifies documentation and reduces transcription errors during batch testing. Built for robust use on the shop floor With an IP54 protection rating the device tolerates dust ingress and splashing fluids typical in metalworking and general workshop conditions, while the rechargeable lithium battery keeps downtime low and avoids frequent battery changes. The electronic display incorporates an on/off switch and straightforward zeroing, enabling fast set‑up and quick transitions between inspection tasks. An adjustment standard is included, facilitating simple verification of zero and aiding routine traceability without immediate external calibration. Compact measuring range matched to fine mechanical work The measuring range of 75–100 mm places this micrometer in the compact class ideal for fine mechanical assemblies and precision components where stiffness and handling are crucial. Such a range gives a practical balance between reach and rigidity, making it suitable for small assemblies, toolroom tasks and fine adjustment work in fixtures. The instrument’s form factor supports safe, single‑hand operation while maintaining the stability needed for micrometre‑level results. Faster measurement routines and integration into QA workflows The digital fine indicator speeds up repetitive measurement tasks and reduces operator fatigue compared with prolonged analogue reading. Clear numeric output and mm/inch switching streamline data capture for quality records and short measurement cycles, supporting higher throughput without sacrificing accuracy. The combination of compact design, high resolution and robust protection makes this micrometer a practical addition to manufacturing lines, inspection benches and maintenance toolkits. For precise, workshop‑ready measurements from Filetta, contact Metav Werkzeuge for product selection and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on the best configuration for specific applications. Technical data Article number: MS910.505 Name: Tolerance micrometer, digital fine indicator Manufacturer: Filetta Protection class: IP54 Measurements Measuring range: 75–100 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Measuring faces: Ø6.5 mm Measuring force: 5–10 N Display: mm/inch, on/off Battery: Lithium, rechargeable Adjustment standard: included Special features Digital fine indicator for fast readings Robust IP54 protection for workshop use Rechargeable power source reduces downtime Supplied adjustment gauge for verification FAQ What measuring range does this micrometer cover? The micrometer covers a range from 75 to 100 mm, making it suitable for compact precision tasks and small assemblies. What resolution and accuracy can be expected from the device? The digital fine indicator provides a resolution of 0.001 mm with an accuracy of ±0.005 mm for repeatable tolerance checks. Is the instrument protected against workplace contamination? Yes, the instrument has an IP54 rating, offering protection against dust ingress and water splashes typical of workshop environments. Does the micrometer include any calibration or verification aid? An adjustment standard is supplied with the micrometer to allow immediate verification and simpler routine checks. What power source does the display use? The unit uses a rechargeable lithium battery and features an on/off control and mm/inch switching on the digital display. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
75-100mm Tube Wall Thickness Micrometer Colour Touchscreen, IP65, ISO17025 Calibration - Microtech Metrology
Take advantage of highly reproducible measurements thanks to an ISO 17025 calibration certificate and a fine 0.003 mm measurement accuracy, together with flexible Wireless and USB data transfer for seamless integration into digital workflows; order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for application advice. Tube Wall Thickness Micrometer — microcomputer-controlled micrometer with Wireless+USB and 2.4" touchscreen by Microtech Metrology Tube wall thickness micrometer with a microcomputer for precise measurement of tube and pipe wall thicknesses in production and quality control environments *ISO 17025 calibration certificate included *0.003 mm measurement accuracy *Wireless and USB data output compatible with HID protocols Measurement precision that protects product quality The instrument combines a 0.003 mm stated accuracy with a high-resolution readout, delivering reproducible results for thin-walled components. Supplied with an ISO 17025 calibration certificate, the device meets traceability requirements for production control and inspection records. The calibration certificate documents compliance with recognised standards and simplifies incorporation into quality management systems. Such metrological reliability reduces scrap rates and supports consistent process control in serial production. Streamlined data capture for modern production lines Equipped with Wireless and USB data outputs and a 2.4" colour touchscreen, the micrometer transfers measurements directly to Windows, Android, iOS, macOS or Linux systems using standard HID protocols. The combination of wireless long-range transmission and USB HID ensures fast, error-free data logging and easy integration with SPC or MES solutions. A built-in microcomputer processes readings before transfer, reducing manual transcription and accelerating reporting cycles for quality teams. Robust design for everyday workshop and laboratory use Engineered for routine inspection tasks, the instrument features an IP65 rating, a friction ratchet for reproducible contact force and a rotating spindle for smooth operation. Classified as a micro-range instrument (measurement span 75–100 mm), it is compact enough for fine-mechanical work yet offers reach for larger tubular components. The tool is suitable for measuring tube wall thicknesses from 4.7 mm upwards and its protective ingress rating supports usage in workshop environments where coolant mist or dust may be present. Practical fit for production and research applications This micrometer bridges laboratory accuracy and shop-floor usability: the calibrated measuring system supports audit-ready documentation while the ergonomic controls and ratchet mechanism promote repeatable handling during high-throughput checks. Integration-ready data outputs and the touchscreen reduce cycle time for logged measurements, supporting lean inspection routines. For operations seeking dependable, calibrated measurements from a single supplier, the instrument delivers metrological rigour and straightforward digital workflow compatibility. Contact Metav Werkzeuge today to specify the correct Microtech Metrology tube wall thickness micrometer for the intended application and arrange delivery of the ISO 17025‑calibrated unit directly from our Emmerich hub Technical Data Article number: 110351008 GTIN: 4061905040870 Manufacturer: Microtech Metrology Facts Measurement range: 75–100 mm Measurement accuracy: 0.003 mm Display/readout resolution: 0.0001 mm Display size: 2.4" touchscreen Protection rating: IP 65 Special features ISO 17025 calibration certificate included Wireless + USB data output (HID compatible) Colour 2.4" touchscreen Friction ratchet for constant measuring force Rotating spindle for smooth adjustment Suitable for tube wall thickness from 4.7 mm Computerised micrometer electronics with long-range wireless option FAQ Is the micrometer supplied with a calibration certificate? Yes. The micrometer is delivered fully calibrated with an ISO 17025 calibration certificate, documenting traceability and measurement conformity. Which data interfaces are supported for direct logging? Measurements are output via Wireless and USB using HID protocols, allowing direct transfer from the Microtech micrometer to Windows, Android, iOS, macOS or Linux systems. What is the usable measurement range and typical application? The device covers a measurement span of 75–100 mm and is intended for tube wall thickness checks, able to measure wall thicknesses from 4.7 mm upwards. How does the instrument perform in workshop conditions? With an IP65 rating, a friction ratchet and a rotating spindle, the micrometer is designed for robust shop‑floor use while maintaining repeatable contact force and reliable readings. Can this instrument be integrated into a quality management workflow? Yes. The calibrated readings, USB/Wireless outputs and digital readout make the instrument suitable for SPC and MES integration and for generating audit-ready measurement records (SKU 110351008). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Tube Wall Thickness Micrometer Digital IP65, Friction Thimble, ISO 17025 Calibration Certificate - Microtech Metrology
The high-accuracy digital micrometer combines IP65 protection, a 0.003 mm accuracy specification and an ISO 17025 calibration certificate to deliver reliable, traceable tube wall measurements on the shop floor; its friction thimble and rotating spindle ensure consistent contact. Order the Tube wall thickness micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech CertiMet TUBE digital tube wall thickness micrometer — IP65, ISO 17025-calibrated Microtech CertiMet TUBE is a digital tube wall thickness micrometer for industrial inspection and shop-floor quality control, engineered for repeatable measurements on cylindrical components. Digital readout with 0.001 mm resolution IP65 aluminium housing for harsh environments ISO 17025 calibration certificate included Friction thimble and rotating spindle for stable contact Reliable accuracy for production control The instrument provides a verified measurement chain with a stated accuracy of 0.003 mm and a display resolution of 0.001 mm, making it suitable where small deviations affect part performance. The robust electronic readout removes the uncertainty of analogue scales while the friction thimble maintains a uniform contact force during measurement, reducing operator-induced variation. This combination supports faster decision-making in quality control and reduces rework by ensuring that wall-thickness readings are consistent and comparable across batches. Built for the workshop and the field An aluminium housing with IP65 protection allows the micrometer to be used in workshops where coolant spray, dust or fluctuating conditions are present. The rotating spindle and friction ratchet ensure precise approach and repeatable closure on tubes, while the compact form factor supports inspections in confined fixturing or on assembled equipment. The device’s robustness and ergonomic handling translate into fewer interrupted measurements and less downtime during routine checks. Traceability and conformity for documented quality Delivered with an ISO 17025 calibration certificate (Ilac MRA), the micrometer arrives ready for use in audited quality systems and supplier chains that require documented measurement confidence. The certificate establishes traceability to national standards, simplifying incoming and final inspection documentation. For regulated production environments or when supplier certification is requested, this accredited calibration provides clear evidence of measurement competence. Practical functions and adaptability in application The instrument offers quick-switch functions — mm/inch, origin set and a hold feature — that streamline inspection workflows and reduce post-processing. A custom-size tube anvil can be supplied on request to suit non-standard pipe geometries, and the tool is specifically suited for tube wall thickness measurements starting from around 4.7 mm, addressing small-diameter tubing as well as larger sections within its 75–100 mm measuring range. These capabilities improve throughput by tailoring the micrometer to the part rather than adapting the part to the tool. Discuss application requirements or secure the Microtech CertiMet TUBE with Metav Werkzeuge — our specialists in Emmerich provide specification advice, calibration documentation and delivery coordination Technical Data Article number: 110351001 GTIN: 4061905040658 Manufacturer: Microtech Metrology Facts Measuring range: 75–100 mm Resolution (reading): 0.001 mm Accuracy: 0.003 mm Protection class: IP65 Display type: digital Special features Friction thimble (friction ratchet) Rotating spindle Functions: mm/inch, origin, hold Aluminium housing Calibration certificate: ISO 17025 (Ilac MRA) Custom tube anvil available on request Suitable for tube wall thickness measurements from 4.7 mm FAQ Is the micrometer supplied calibrated? Yes. The CertiMet TUBE is delivered with an ISO 17025 calibration certificate, ensuring traceability and suitability for audited quality systems. Can the instrument be used in damp or dusty environments? The aluminium housing and IP65 rating protect the electronics and mechanisms against dust ingress and water jets, making it suitable for demanding workshop conditions. What measurement range and resolution are available? The device covers a 75–100 mm measuring range with a display resolution of 0.001 mm and an accuracy of 0.003 mm. Is a customised anvil available for special tube shapes? Yes, Microtech Metrology can supply a custom-size tube anvil on request to match unusual geometries and ensure correct contact for wall-thickness readings. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Universal Micrometer Screw Gauge Colour Touchscreen, ISO 17025 Calibrated, IP65 - Microtech Metrology
Take advantage of precision measurement, robust protection and fully traceable delivery: the combination of 0.004 mm accuracy, ISO 17025 calibration and wireless plus USB data output ensures reliable results and efficient documentation. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Universal micrometer — Digital micrometer with 2.4" touchscreen and wireless + USB, Microtech Metrology The Universal micrometer is a precision digital micrometer for workshop and laboratory measuring tasks, covering the 75–100 mm range for component inspection and quality control 0.004 mm high precision measurement Colour 2.4" touchscreen display Wireless and USB data output Supplied calibrated to ISO 17025 Reliable precision where repeatable results matter The instrument delivers a 0.004 mm specification for measurement uncertainty, together with a display resolution of 0.0001 mm, giving clear numeric feedback for fine tolerances. A non-rotating spindle reduces torsional error during measurement, improving repeatability when comparing batches or validating process changes. Supplied measuring anvils in seven matched pairs make setup faster when switching between external and stepped measurements, reducing fixture time and potential operator variation. Seamless data capture and documented traceability Integrated wireless and USB interfaces provide immediate data transfer to inspection software or SPC systems, cutting transcription time and lowering the risk of manual entry errors. The large 2.4" colour touchscreen simplifies reading and parameter adjustments on the bench. Delivered fully calibrated to ISO 17025, the instrument includes a traceable calibration certificate, ensuring each result can be linked to recognised laboratory standards for audits and supplier acceptance. Built for daily use in harsh production environments With an IP65 rating, the micrometer withstands chips, coolant splashes and shop‑floor dust while maintaining measurement integrity. The 75–100 mm measuring span places this instrument in the micro class (maximum range 10–100 mm), which balances compact handling with sufficient reach for precision components; the size is particularly suited to fine mechanical work and quality control of small to medium parts. Robust construction and an ergonomic form factor keep operator fatigue low and handling consistent across repetitive tasks. Practical advantages for procurement and inspection workflows Choosing this digital micrometer reduces inspection cycle time and scrap through faster, more reliable measurements and direct data logging. The combination of tactile touchscreen control, sealed protection and wireless data transfer supports both bench use and integration into automated inspection routines. Metav’s quality filter in Emmerich assures central European supply reliability and a comprehensive product range, simplifying sourcing and post‑purchase traceability for production and maintenance teams. For ISO 17025‑calibrated precision and seamless data integration, contact Metav Werkzeuge in Emmerich for personalised advice and supply coordination: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 110751008 GTIN: 4061905040368 Manufacturer: Microtech Metrology Facts Measuring range: 75–100 mm Accuracy: 0.004 mm Display resolution: 0.0001 mm Display: Colour 2.4" touchscreen Protection class: IP65 Special features Digital instrument with wireless and USB data output Supplied with 7 pairs of measuring anvils Non-rotating measuring spindle Delivered calibrated to ISO 17025 with certificate Suitable for workshop and laboratory inspection FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 75–100 mm, suitable for micro‑class inspection tasks and fine mechanical components. Is the instrument delivered calibrated and traceable? Yes — the micrometer is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How is measurement data exported from the instrument? Measurement data can be exported via wireless and USB interfaces for direct import into inspection software or SPC systems. Can the micrometer withstand shop‑floor conditions? The instrument has an IP65 rating, providing protection against dust and water jets typical on production floors. Which accessories are supplied with the micrometer? The delivery includes seven pairs of measuring anvils for rapid reconfiguration between different measurement tasks (SKU 110751008, Microtech Metrology) Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75mm Disc Anvil Micrometer, 20mm Disc, Ratchet Stop, Painted Frame, Matt Chrome Thimble - Metav IndustryLine
The combination of ±0.005 mm accuracy, a ratchet stop and a non-rotating spindle ensures reliable, repeatable thickness checks on flat components; delivered in a protective transport case for safe handling. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. M309.252 Disc-Anvil Micrometer, 50–75 mm, Ø20 mm — Metav IndustryLine The M309.252 disc-anvil micrometer is a precision mechanical instrument for workshop and inspection use, designed for repeatable measurements of flat and slightly profiled surfaces within the 50–75 mm range. High-precision ±0.005 mm accuracy Disc anvil Ø20 mm for flat surfaces Non-rotating spindle with ratchet stop Delivered in protective transport case Reliable measurement performance for production control Equipped with a finely graduated thimble and a rated accuracy of ±0.005 mm, this analogue micrometer delivers consistent results for routine quality checks and dimensional control. The engraved scale provides a 0.01 mm readout, while the ratchet stop limits applied measuring force to reduce operator-induced variation. Together with the non-rotating spindle, these features minimise wear on the workpiece and deliver stable repeatability, making the tool suitable for shop-floor inspection and routine process monitoring in metalworking and toolmaking. Robust design that supports fast, ergonomic handling The instrument combines a painted frame with a matt-chrome plated measuring drum, offering a durable surface finish that resists everyday knocks and contamination. The Ø20 mm disc anvil spreads contact pressure and stabilises readings on flat components, while a compact mass of 0.8 kg keeps the micrometer easy to manoeuvre during repetitive tasks. Delivery includes a protective transport case to safeguard the instrument between uses and during transport, improving service life and reducing downtime for maintenance or replacement. Practical fit for workshop and inspection environments With a measuring range of 50–75 mm, this micrometer covers medium-sized parts typical in general machining, fixture production and component assembly. The mechanical construction supports straightforward use without electronics, which simplifies maintenance and long-term reliability in harsh workshop conditions. As part of the Metav IndustryLine, the instrument is identified by GTIN 4054469118710 and SKU M309.252, ensuring traceability and straightforward stock management for procurement and calibration planning. For precise, workshop-ready measurement from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply directly from the European quality hub. Technical Data Article number: M309.252 GTIN: 4054469118710 Manufacturer: Metav IndustryLine Facts Measuring range: 50–75 mm Measuring range min: 50 mm Measuring range max: 75 mm Resolution/readability: 0.01 mm Accuracy: ±0.005 mm Weight: 0.8 kg Special features Disc anvil Ø20 mm Frame painted Measuring drum matt chrome-plated Non-rotating spindle Ratchet stop Analogue micrometer Delivered in protective transport case FAQ What measuring range does this micrometer cover? The M309.252 covers a measuring span of 50–75 mm, suitable for medium-sized components commonly found in machining and assembly. How precise is the device and what is the readout? The instrument has an accuracy of ±0.005 mm with a readout graduation of 0.01 mm for clear analogue measurement. Why is the non-rotating spindle important? A non-rotating spindle prevents surface scuffing on the workpiece and improves repeatability; this feature is incorporated in the M309.252 for reliable flat-surface checks. What benefit does the Ø20 mm disc anvil provide? The disc anvil increases contact area on flat or thin-walled parts, reducing local deformation and yielding more stable measurements. Is the micrometer supplied ready for transport? The M309.252 is supplied in a protective transport case to ensure safe handling and storage between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Setting Gauge 55° For Thread Micro Inserts 60°/55° Options - Metav IndustryLine
Take advantage of a compact, dedicated reference that ensures reproducible thread settings: the 75 mm length and precise 55° profile deliver concise adjustment and reliable repeatability for workshop and inspection use. Order the setting gauge directly via Metav Werkzeuge or contact our consultants for further advice. Setting gauge 75 mm for thread micrometer, 55° — Metav IndustryLine The Setting gauge 75 mm for thread micrometer, 55° provides a stable reference for calibrating and adjusting thread measuring instruments, designed primarily for Whitworth thread inserts in workshop and quality‑control environments 75 mm precision setting gauge 55° angle for Whitworth thread inserts Robust accessory for thread micrometers Metav IndustryLine quality and traceability Reliable reference that reduces setup time and measurement uncertainty A compact 75 mm reference block serves as a quick and reproducible datum when adjusting thread measuring tools. By using a dedicated gauge rather than makeshift references, setup times are reduced and the risk of systematic error is minimised. The instrument acts as a clear mechanical standard for the contact faces of a thread micrometer, so machinists and inspection staff achieve consistent starting conditions across multiple setups, which improves overall repeatability and process reliability. Correct profile angle for Whitworth threads ensures contact accuracy The 55° profile corresponds to the Whitworth thread form, guaranteeing that the contact geometry of the gauge matches the flank angle of corresponding inserts. Where a 60° form is required for other thread inserts, that profile is commonly used; this item is the 55° variant intended for Whitworth applications. Matching the profile angle avoids misleading contact points during adjustment and supports correct functional assessment of gauging assemblies, contributing to dependable calibration outcomes. Workshop-friendly accessory built for smooth integration As a purpose-made accessory for thread metrology, the gauge occupies minimal bench space while delivering a tactile, stable reference for alignment and verification tasks. The compact format and clear geometry make it suitable for use at production benches and inspection tables alike, supporting faster tool changeovers and fewer adjustment iterations. Traceability and part identification are straightforward thanks to the visible SKU M309.091.2 and supplied identifiers, which aid stock management and quality documentation. Choose the Metav IndustryLine setting gauge 75 mm (55°) for dependable Whitworth calibration — contact Metav Werkzeuge in Emmerich for purchasing advice or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.091.2 GTIN: 4054469118123 ECLASS: 21170102 Customs tariff number: 90173000 Facts Length: 75 mm Angle: 55° Special features Accessory for thread micrometers Intended for Whitworth thread inserts (55°) 60° form used for other thread insert types Category: Zubehör (accessory) FAQ What is the primary purpose of this setting gauge? The setting gauge is a compact reference intended to calibrate and adjust thread measuring instruments, ensuring reproducible contact for thread micrometer adjustments. Is the gauge suitable for Whitworth threads only? This 55° variant is designed specifically for Whitworth thread inserts; alternatives with a 60° profile exist for other thread insert types. How does the gauge improve measurement consistency? Using the dedicated 75 mm block as a mechanical datum reduces setup variability and supports repeatable adjustment procedures, which enhances measurement consistency across production batches. Which product identifiers should be used for ordering or inventory? Reference Metav IndustryLine, SKU M309.091.2 and GTIN 4054469118123 when ordering or recording the item in inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Setting Gauge For Micrometers With Thermal Shield, Accuracy ±0.002mm - Metav IndustryLine
Taking advantage of a compact 75 mm reference length together with a ±0.002 mm accuracy and integrated thermal protection ensures reproducible micrometer adjustments and efficient setup routines; order the setting gauge directly via Metav Werkzeuge or consult our specialists for application support. Setting Gauge for Micrometers M304.311 — 75 mm, ±0.002 mm, Thermal Protection A Setting Gauge for Micrometers M304.311 that provides a stable 75 mm reference for adjusting and checking external micrometer anvils in workshop and laboratory environments. 75 mm reference length for micrometer setting High accuracy ±0.002 mm tolerance Flat measuring faces for stable contact Integrated thermal protection for stability Precision where reproducibility matters The device functions as a reference standard for external micrometer calibration, offering a nominal length of 75 mm and a verified accuracy of ±0.002 mm (2 µm). This degree of precision places the gauge in a class suitable for routine workshop calibration and fine adjustment tasks where tight tolerances are required. The stated tolerance means that adjustments made against this standard will minimise measurement deviation during subsequent production or inspection steps, increasing process reliability and reducing scrap rates. Explanation of tolerance values and the role of a reference standard helps translate technical figures into operational benefits for quality assurance teams. Thermal control to avoid measurement drift Thermal influence is a common source of measurement error in small comparative gauges. The unit’s integrated thermal protection reduces heat transfer from hands or bench surfaces, limiting length expansion during handling. Combined with flat measuring faces, this reduces local contact distortions and helps preserve the true reference dimension while taking a reading. For repeated setups and sequential checks, thermal stability supports consistent results and fewer re-measures, which saves time on repetitive tasks and contributes to predictable inspection throughput. Practical handling and workshop integration Designed for straightforward use, the gauge is lightweight (approx. 0.1 kg) and easy to position against an external micrometer anvil; a nominal diameter of 7 mm defines the contact geometry for stable seating. As a dedicated accessory for micrometer adjustment, it shortens set-up cycles and improves operator confidence during routine verification. The compact size and robust working faces make the tool suitable for bench use in maintenance, toolroom and metrology benches alike. Where documentation is required, the clear numerical values allow immediate entry into calibration records or shop-floor checklists. For precise micrometer adjustment, choose the Metav IndustryLine M304.311 setting gauge — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M304.311 GTIN: 4054469116624 Manufacturer: Metav IndustryLine Short description: Setting gauge for micrometers, nominal 75 mm Dimensions & accuracy Nominal length: 75 mm Diameter: 7 mm Accuracy: ±0.002 mm Weight: 0.1 kg Tariff code: 90173000 ECLASS: 21170102 Features & applications Flat measuring faces Thermal protection Accessory for external micrometer adjustment Suitable for workshop and laboratory use FAQ What is the nominal length and accuracy of the gauge? The setting gauge has a nominal length of 75 mm and an accuracy of ±0.002 mm, suitable for fine adjustments and routine verification. Can this gauge be used to set external micrometer anvils? Yes, the M304.311 is designed specifically as a reference for setting external micrometer anvils and other similar comparative checks. How does the thermal protection benefit measurement tasks? Thermal protection reduces heat transfer during handling, limiting dimensional drift so that readings taken against the reference remain more stable and reproducible. Is the gauge suitable for both workshop and laboratory environments? The compact construction and flat measuring faces make the gauge appropriate for toolroom, maintenance and laboratory benches where a stable 75 mm reference is required. What is the contact geometry of the gauge? The gauge features flat measuring faces and a contact diameter of 7 mm, providing a stable seating surface for external micrometer anvils. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Setting Gauge for Thread Micrometers 60° For Thread Inserts 0.03kg - Metav IndustryLine
Take advantage of precise 75 mm setting, compatibility with standard 60° and Whitworth 55° thread profiles, and a lightweight design for rapid, repeatable adjustment—ensuring consistent thread measurement setup. Order directly via Metav Werkzeuge for workshop-ready supply or consult our specialists for technical matching. Setting Gauge 75 mm (M309.097.2) — 60° Thread setting gauge, Metav IndustryLine The Setting Gauge 75 mm is a compact accessory designed to set and verify thread micrometers and thread inserts, providing reliable reference geometry for 60° thread profiles while accommodating Whitworth 55° inserts where specified. Precise 75 mm gauge length Compatible with 60° thread profiles Lightweight 34 g for easy handling GTIN and SKU identifiable Fast, measurable setup for thread metrology A compact setting gauge delivers measurable time savings at the workbench and in quality control. The 75 mm reference length creates a stable datum for aligning a thread micrometer, reducing the need for iterative adjustments and minimising setup time. Made for repeatable use, the lightweight construction at 0.034 kg allows quick handling without compromising contact stability. The direct mechanical geometry means setting is immediate and does not rely on external electronics, which supports efficient inline checks and simple integration into workshop routines. Compatibility that reduces uncertainty in thread checks This accessory supports common 60° thread insert profiles and, where required, can be applied to Whitworth 55° inserts owing to its specified angle options. Clear angular definition ensures the gauge reproduces the thread flank geometry needed to set micrometers and gauge anvils accurately. By matching the flank angle and reference diameter, the tool helps maintain measurement consistency across batches, thus lowering scrap rates and rework. The robust design is beneficial in mixed-production environments where multiple thread standards are encountered. Practical benefits for inspection and tool setup Designed as a straightforward reference tool, the gauge simplifies routine verification and setup procedures. Identification via SKU M309.097.2 and GTIN 4054469118253 makes it traceable in tool inventories and documentation. The simple form factor is suitable for bench-top use, enabling quick checks before critical machining steps or final inspection. As an accessory in the measurement toolkit, it contributes to a lean workflow: less repeated measuring, quicker pass/fail decisions, and clearer traceability of the setting process. Contact Metav Werkzeuge today for specific compatibility advice and ordering support from our Emmerich centre, where workshop-ready precision meets reliable supply Technical data Article number: M309.097.2 GTIN: 4054469118253 SKU: M309.097.2 Category: Messgeräte › Zubehör eCl@ss: 21170102 Facts Length: 75 mm Weight: 0.034 kg Angle: 60° Tariff number: 90173000 Special features 60° for thread inserts 55° option for Whitworth thread inserts Lightweight design for easy handling Accessory for thread micrometers Brand: Metav IndustryLine FAQ What is the purpose of this setting gauge? This setting gauge is a precision reference for setting and verifying thread micrometers and thread insert geometry, helping ensure accurate flank contact and repeatable measurements with the M309.097.2 accessory. Can the gauge be used for Whitworth threads? Yes, the accessory supports a 60° profile and includes the specification for a 55° flank, allowing application with Whitworth-style thread inserts where that angle is required. What are the identification details for inventory? The product is listed under SKU M309.097.2 and GTIN 4054469118253, which supports traceability in toolroom and inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75–100 mm Digital Micrometer 0.001 mm Resolution, Ratchet, Stainless Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of precise, repeatable external measurements and a clear digital readout to streamline inspection processes; the combination of 0.001 mm resolution, a secure ratchet stop and robust construction supports reliable quality control. Order the instrument directly via Metav Werkzeuge or consult our experts for specification guidance. Digital Micrometer M302.257 — 75–100 mm, 0.001 mm resolution The Digital Micrometer M302.257 is a workshop-grade outside micrometer designed for accurate external measurements in mechanical engineering and quality assurance tasks. 0.001 mm digital resolution ON/OFF, SET, ABS/INC/UNIT display Ratchet stop for consistent force Measuring faces 6.5 mm Increase measurement certainty with sub-micron readback The instrument offers a 0.001 mm display step across the 75–100 mm measuring span, which converts fine movements into a clear digital readout and reduces readout uncertainty compared with coarse analogue scales. Compliance with DIN 863 underlines its suitability for routine inspection and component acceptance; the thin, well-defined measuring faces 6.5 mm give a small contact footprint that is advantageous when measuring narrow bosses, shafts or turned features. This level of resolution supports tighter process control and faster decision-making in production environments. Consistent contact force and intuitive controls speed up workflows A built-in ratchet stop ensures a reproducible measuring force, reducing variation caused by operator pressure and improving repeatability across a batch of parts. The digital display features ON/OFF, SET and ABS/INC/UNIT modes for switching between absolute and incremental readings, zeroing at any position, and selecting units quickly—features that translate into fewer setup steps and less post-processing of measurement data. The frame is painted for durable handling while the matt chrome-plated thimble improves visibility and resists wear, together supporting efficient, fatigue‑reduced operation on the workshop bench. Robust construction designed for everyday use in the workshop Hardened contact faces and a sturdy frame provide the longevity required for frequent use in machining and inspection stations. The instrument includes a practical setting gauge reference (setting gauge from 25–50 mm) for straightforward calibration checks and set‑up routines. As part of the Metav IndustryLine, this micrometer pairs industrial-grade mechanics with clear digital functionality, making it a reliable choice for tasks where reproducibility and traceable workmanship are priorities. For reliable, workshop-ready precision choose the Metav IndustryLine digital micrometer and contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice Technical data Article number: M302.257 GTIN: 4054469151755 Category: Micrometers Standard: DIN 863 Digital display functions: ON/OFF, SET, ABS/INC/UNIT Resolution: 0.001 mm Measuring range: 75–100 mm Facts Measuring range: 75–100 mm Resolution: 0.001 mm Measuring faces diameter: 6.5 mm HS code: 90173000 eClass: 21170328 ETIM: EC003590 Design and special features Frame painted; measuring drum matt chrome-plated Ratchet stop for consistent measuring force Hardened measuring faces Setting gauge from 25–50 mm FAQ What resolution does the micrometer provide? The micrometer displays measurements with a resolution of 0.001 mm, allowing very fine discrimination within the 75–100 mm measuring range. Is the device suitable for workshop inspection tasks? Yes, the M302.257 is designed for workshop and quality-assurance use, complying with DIN 863 and providing repeatable readings for routine inspection and production control. How does the ratchet stop affect measurement quality? The ratchet stop ensures a consistent contact force at the measuring faces, which reduces operator-induced variation and improves repeatability across multiple measurements. Which display functions are available for measurement modes? The device includes ON/OFF and SET controls plus ABS/INC/UNIT functions, enabling zeroing at any point, switching between absolute and incremental modes, and changing measurement units. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75–100 mm Digital Micrometer With Friction Thimble, 0.001 mm Resolution, RB6 Data Output, Supplied In Case - Metav IndustryLine
The combination of 0.001 mm resolution, a friction ratchet for reproducible measuring force and a standardised RB 6 data output supports reliable production control and seamless data capture. Benefit from a compact, micro‑range design that delivers repeatable external measurements; order directly via Metav Werkzeuge or contact our consultants for application advice. Digital micrometer M302.077 — 75–100 mm, 0.001 mm resolution (Metav IndustryLine) The Digital micrometer M302.077 is a precision external measuring instrument designed for fine mechanical workshop and inspection use, offering high‑resolution readings and digital data output for process integration. 0.001 mm reading precision Friction ratchet for consistent force RB 6 data output for traceable records Compliant with DIN 863 High precision where tight tolerances matter The instrument delivers 0.001 mm resolution on a 75–100 mm measuring span, enabling confidence in tight tolerance checks and finish control. The fine display resolution converts to practical gains at the inspection bench: shorter checking cycles and fewer manual adjustments. The friction ratchet ensures a consistent measuring force, reducing operator‑dependent variation and improving repeatability over multiple parts. For tasks that require verified external measurements, this micrometre gauge offers a measurably superior basis for decision‑making. Ergonomics and handling that reduce error A thoughtfully proportioned frame and tactile ratchet make the tool straightforward to operate during repetitive checks; the controlled feel of the ratchet avoids over‑tightening that distorts readings. The measuring faces of 6.5 mm diameter provide a stable contact area while keeping the tip profile compact for small features. Weighing around 1.3 kg, the unit balances solidity and workshop practicality: it is robust enough for frequent use yet still manageable for single‑person handling during standard inspection routines. Digital integration for efficient data capture Equipped with an RB 6 data output, the electronic readout supports direct transfer of measurements to logging systems or SPC software, cutting transcription time and reducing clerical errors. The digital display includes ON/OFF/SET/DATA/mm/inch/0 functions to simplify zeroing and unit changes at the bench. Where traceability and documented measurement records are required, this instrument enables straightforward capture of values without interrupting production flow. Built for routine use and workshop longevity Construction meets DIN 863 expectations for micrometres, and hardened measuring faces increase wear resistance under regular use. The instrument is supplied in a protective case for safe transport and storage, guarding calibration and accuracy between uses. Classified in the micro range for external gauges, the design supports fine mechanical and inspection tasks commonly found in toolmaking, maintenance and quality control environments. Contact Metav Werkzeuge for application guidance and to arrange supply of the Metav IndustryLine digital micrometer M302.077 with 0.001 mm resolution and RB 6 output; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M302.077 GTIN: 4054469168821 Category: Micrometres Facts Measuring range: 75–100 mm Resolution / reading: 0.001 mm Measuring faces: 6.5 mm Weight: 1.3 kg Tariff number: 90173000 Special features Digital display with ON/OFF/SET/DATA/mm/inch/0 functions Friction ratchet for reproducible measuring force RB 6 data output for direct data transfer Hardened measuring faces for wear resistance Supplied in protective case Conforms to DIN 863 FAQ Is the micrometer suitable for precision workshop checks on small parts? Yes. The Metav IndustryLine digital micrometer M302.077 operates in the micro range (75–100 mm) and, with its 0.001 mm resolution and friction ratchet, is intended for fine external measurements typical in precision workshops. Can measurements be exported to a data collection system? The unit includes an RB 6 data output, enabling direct transfer of readings from the digital micrometer M302.077 to compatible logging or SPC systems for streamlined documentation. How does the friction ratchet improve measurement reliability? The friction ratchet provides a controlled final torque when closing the spindle, which standardises the measuring force and reduces operator‑related variability in repeated checks with the digital micrometer. Are the measuring faces durable for regular use? The measuring faces on this micrometre are hardened and have a 6.5 mm contact diameter, offering enhanced wear resistance suitable for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75–100mm Three-Point Disc Micrometer Ø30mm Disc, Painted Frame, Matt Chrome Drum, Ratchet, Boxed - Metav IndustryLine
Take advantage of a compact disc micrometre that combines a practical 75–100 mm measuring range with a fine accuracy of ±0.005 mm and a ratchet stop for repeatable contact force — supplied ready for safe transport in a protective case. Order directly via Metav Werkzeuge or consult their specialists for procurement and technical advice. Disc micrometre M309.353 — Analog micrometre, 75–100 mm, Ø30 mm disc The Disc micrometre M309.353 is an analog workshop micrometre designed for precise linear measurements in metalworking and mechanical assembly, offering a standard-range solution for routine and quality-control tasks. Measuring range 75–100 mm Ø30 mm disc measuring faces Accuracy ±0.005 mm Ratchet stop for consistent measuring force Consistent repeatability for workshop measuring routines The micrometre is built around a proven mechanical design that prioritises repeatable measurements in production and inspection. The integrated ratchet stop limits applied torque, reducing operator-induced variation and supporting reproducible contact pressure. With an accuracy of ±0.005 mm (5 µm), the instrument meets tighter workshop tolerances than common industrial nonius gauges, making it well suited for demanding fits and precision assemblies while remaining straightforward to read and interpret. Disc measuring faces for delicate and curved surfaces Equipped with Ø30 mm disc measuring faces, this model spreads contact pressure over a larger area compared with point anvils. That geometry helps to avoid local indentations when measuring softer materials or parts with slight curvature, and it improves alignment on short contact paths. The non-rotating spindle protects the workpiece surface during measurement and reduces the risk of scoring, which supports serviceable longevity of both the instrument and sensitive components. Robust finish and ergonomic handling for daily use The frame is lacquered for corrosion resistance and the thimble is matt-chrome plated to reduce glare and provide a durable, tactile surface for adjustment. At approximately 1.1 kg the tool offers a solid feel that aids stable handling without being cumbersome. The analogue scale keeps the instrument simple to operate, with familiar mechanical feedback that many machinists and inspectors prefer for quick checks and bench use. Integration into the workshop and transport-ready delivery Classified in the Standard range (maximum 100 mm), this micrometre complements 150/200/300 mm base tools commonly used in mechanical workshops, providing an efficient balance of reach and stiffness. The instrument is supplied in a protective transport case to safeguard the measuring faces and mechanism during storage and transit. Its straightforward mechanical design makes maintenance straightforward and ensures long service life when handled correctly. Choose Metav IndustryLine's disc micrometre M309.353 for reliable 5 µm accuracy and workshop-proven repeatability — contact Metav Werkzeuge for ordering and specialist advice from Emmerich. Technical data Article number: M309.353 GTIN: 4054469118802 Category: Messschrauben (micrometres) Label: Teller-Mess, ND, 75 - 100 mm, Ø 30 mm Teller Facts Measuring range: 75–100 mm Accuracy: ±0.005 mm Disc diameter: Ø 30 mm Weight: 1.1 kg Reading: analog (mechanical) Special features Lacquered frame Matt-chrome thimble Ratchet stop Non-rotating spindle Delivered in a transport case Suitable for workshop and inspection use FAQ What measuring range does the micrometre cover? The Disc micrometre M309.353 covers a 75–100 mm range, placing it in the standard workshop class for medium‑sized components. How precise is the instrument for quality-control tasks? The instrument offers an accuracy of ±0.005 mm, which is suitable for fine mechanical assemblies and reproducible inspection steps. Are the measuring faces suitable for delicate surfaces? Yes, the Ø30 mm disc measuring faces distribute contact pressure and, together with the non-rotating spindle, reduce the risk of surface marking on softer materials. Does the micrometre provide consistent contact pressure? The built-in ratchet stop ensures repeatable measuring force, improving measurement consistency across operators and cycles. Is the instrument supplied ready for transport? The micrometre is supplied in a protective transport case, which secures the instrument for storage and movement between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
775mm Setting Gauge For Micrometers With Heat Shield, Accuracy ±0.008mm Ball Contact - Metav IndustryLine
Take advantage of high reproducibility and user-friendly handling with a 775 mm setting gauge that combines ±0.008 mm accuracy and thermal protection for stable micrometer adjustment; order directly via Metav Werkzeuge or consult the team for application-specific advice. M304.321.2 — 775 mm setting gauge for outside micrometers with heat protection M304.321.2 is a precision setting gauge designed to set and verify outside micrometers in production and inspection environments, offering a long measuring range with features that reduce thermal and contact-related measurement errors. 775 mm nominal length High accuracy ±0.008 mm Ball-shaped measuring faces Integrated heat protection Precision that remains consistent over long spans The setting gauge delivers a ±0.008 mm accuracy across its 775 mm nominal length, which makes it suitable where reproducible reference values are required for micrometer adjustment. The ball measuring faces reduce local deformation at the contact points and simplify centring on cylindrical parts, while the solid 16 mm diameter shaft contributes to structural stability. With a mass of 1.3 kg, the unit resists inadvertent movement during setup, translating into fewer re-measurements and a more efficient calibration routine. Designed for workshop and production environments Classified as a large-range (500–1,000 mm) setting instrument, this gauge is intended for use in machine shops, fixture assembly and quality-control benches where extended reach and stiffness are both required. The tool functions as a straightforward reference for setting outside micrometers and is particularly helpful when working with longer spindles, jaws or large workpieces that exceed typical bench gauges. The nominal geometry and handling characteristics reduce the time needed for micrometer adjustment and help maintain process throughput. Built-in thermal protection and trusted provenance Thermal effects are a common source of drift in dimensional work; the integrated heat protection minimises influence from operator contact and ambient temperature fluctuations, supporting stable settings across shifts. Supplied with ball-shaped contacts to limit local distortion, the instrument supports repeatable results during serial setups. As part of the Metav IndustryLine, the gauge benefits from an established European supply chain that focuses on accessible precision and dependable delivery, reinforcing reproducibility at the workshop level. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine 775 mm setting gauge and to discuss delivery options from Emmerich. Technical data SKU: M304.321.2 GTIN: 4054469116808 Manufacturer: Metav IndustryLine Facts Nominal length: 775 mm Accuracy: ±0.008 mm Diameter: 16 mm Weight: 1.3 kg Special features Ball-shaped measuring faces Heat protection Tariff number: 90173000 Category: Accessories — measurement equipment FAQ What is the nominal length of this setting gauge? The setting gauge has a nominal length of 775 mm and is listed as SKU M304.321.2 in the Metav IndustryLine. What accuracy can be expected when using the gauge? The instrument provides an accuracy of ±0.008 mm, enabling precise setting of outside micrometers. Which micrometers is the gauge intended to set? It is designed as a setting gauge for outside micrometers and is suitable for workshop and production adjustment tasks. Does the gauge reduce thermal and contact-related errors? Yes, the model incorporates heat protection and uses ball-shaped measuring faces to minimise thermal drift and local contact deformation. Which measurement-range class does this instrument belong to? The gauge falls into the large-range class (500–1,000 mm), making it suitable for larger components and fixtures where extended reach and stiffness are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Measure external diameters to micrometre precision
Outside micrometers (also known as micrometer screw gauges) are the reference tool when dimensional tolerances leave no room for compromise. With measurement accuracy down to 0.001 mm, these instruments determine outside diameters, material thicknesses and shaft sizes with repeatable results, whether at the machine, on the shop floor or in a controlled metrology room.
How these micrometers deliver reliable readings in practice
Technically, an outside micrometer uses a finely threaded spindle and a fixed anvil; the spindle advance is controlled by a thimble and a ratchet stop, which together ensure a consistent measuring force. The robust frame resists bending during use, while a spindle lock fixes the measured value for reading. Variants range from classic analogue models with vernier or nonius scales to digital versions with IP protection against coolants and an integrated data interface for wireless transfer of quality data. Options include models with tungsten carbide measuring faces, interchangeable spindles and specialised sizes for hard-to-fix components.
Practical advantages that save time and reduce scrap
- Consistent, repeatable measurements thanks to the ratchet stop and rigid frame.
- High resolution of 0.001 mm for micrometre-level quality control.
- One-handed operation via the frame allows simultaneous handling of awkward or small parts (one-handed operation).
- Quick data capture and traceability with digital models featuring a data interface.
- Durable measuring faces and spindle lock for long-term stability (tungsten carbide measuring faces).
Why Metav is the practical choice for your workshop
Metav combines decades of precision expertise with a comprehensive range for industry and trade. From analogue micrometers to advanced digital versions, the Metav assortment acts as a quality filter for the European market, supplying reliable instruments from stock in Emmerich. With a broad catalogue and proven service, Metav reduces supplier complexity while ensuring parts arrive ready for immediate use.
In short: precise, repeatable and ready for industry
Outside micrometers deliver micrometre-level accuracy for external measurements, offering durable construction, ergonomic one-handed handling and modern digital options for straightforward data capture. Metav’s selection covers the spectrum from workshop checks to final inspection.
FAQ
What accuracy can I expect from outside micrometers?
Outside micrometers in this category provide measurement resolution and repeatability down to 0.001 mm, making them suitable for high-precision tasks in toolmaking, automotive and quality assurance.
When should I choose a digital micrometer over an analogue one?
Choose a digital micrometer if you require fast data logging and traceability; digital models in the Metav assortment often include IP protection against coolants and a data interface for wireless quality-data transfer.
Are there micrometers suitable for soft or delicate surfaces?
Yes. Models with specialised anvils and adjustable measuring faces—some fitted with tungsten carbide measuring faces or interchangeable spindles—allow measurement of delicate surfaces while maintaining accuracy.
Can outside micrometers be operated with one hand on the shop floor?
Many outside micrometers are designed for one-handed operation, using the frame and thumb control on the thimble so the other hand can stabilise the workpiece during measurement.
How does the ratchet stop improve measurement consistency?
The ratchet stop ensures a uniform measuring force for each reading; combined with the rigid frame and spindle lock, this produces highly reproducible results across different operators.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com