High-precision micrometers for exact external diameter measurement
Bügelmicrometers, also known as micrometers or outside micrometers, are engineered for the precise determination of external diameters, material thicknesses and shaft dimensions in metalworking and quality assurance, delivering repeatable results down to 0.001 mm with a defined measuring force. Their robust frame prevents deflection while the integrated ratchet ensures consistent contact pressure, making them ideal for in-process checks at the machine or final inspection in the metrology lab; available variants include analogue, digital and carbide-tipped measuring faces for different surfaces and applications. The design enables one-handed operation via the frame while the thimble and ratchet provide fine adjustment and secure locking of the spindle, supporting efficient handling of small or awkward parts. Suitable for toolmaking, automotive production and industrial quality control, these micrometers combine stiffness, ease of use and data-capable digital options for seamless documentation.
200mm Depth Gauge Round Bridge 100mm, 0.01mm Resolution, Replaceable Tips, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise 0–200 mm measuring range, 0.01 mm graduation and replaceable measuring rods for reliable depth measurement in workshop and inspection environments; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M309.061 Depth Micrometer — Round Measuring Rods, 0–200 mm, 0.01 mm M309.061 is a depth micrometer designed for accurate depth measurement in machining, fixture assembly and quality inspection tasks, supplied with exchangeable measuring rods for flexible use. High-resolution 0.01 mm scale Ratchet stop for consistent measuring force Replaceable measuring rods for versatility Convex measuring faces for stable contact Precision where it matters: repeatable depth measurement The M309.061 depth micrometer delivers a measuring range of 0–200 mm with a fine graduation of 0.01 mm, making it suitable for the workshop standard class (100–300 mm) where reach and stiffness are balanced. The instrument’s mechanical design achieves an accuracy of ±0.006 mm, which supports tight inspection tolerances and reduces the need for repeat checks. The round measuring bridge and compact span offer stability during measurement, so depth readings are both reliable and directly comparable across production batches. Consistent contact and straightforward rod changes A ratchet stop provides a controlled measuring force, removing variability caused by manual pressure and improving repeatability in series measurements. The micrometer allows simple exchange of measuring rods; eight measuring rods are supplied, giving immediate flexibility for different groove depths and recessed features. The convex measuring faces ensure a defined contact geometry on stepped or slightly irregular surfaces, helping to centre the contact point and reduce rocking that can otherwise distort small depth values. Workshop-ready delivery and practical benefits Supplied in a protective case, the instrument arrives ready for shop-floor use and protected during transport. The set includes a comprehensive selection of measuring rods to cover common tasks without additional purchase, streamlining inspection routines. As a mechanical depth instrument with analogue reading, it combines proven robustness with straightforward handling—ideal for production environments, maintenance shops and incoming inspection stations where fast, dependable depth checks keep throughput moving. For application support, bespoke advice or to order the Metav IndustryLine M309.061 depth micrometer with its ratchet stop and exchangeable measuring rods, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M309.061 GTIN: 4054469117737 ECLASS: 21170350 ETIM: EC003590 Tariff code: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.006 mm Bridge dimension: 100 x 16 mm Special features Analogue depth micrometer Convex measuring faces Ratchet stop for consistent force Replaceable measuring rods Supplied with 8 measuring rods Delivered in protective case Category: Micrometers / depth micrometer FAQ What measuring range does the micrometer cover? The depth micrometer covers a 0–200 mm range, suitable for standard workshop tasks and medium‑sized components. What resolution and accuracy can be expected? The instrument provides a 0.01 mm graduation and an accuracy of ±0.006 mm, delivering measurement precision for tight tolerances. Are measuring rods included and replaceable? Yes — the set includes 8 measuring rods and the design allows easy replacement of measuring inserts for different depths and applications. Is the micrometer supplied ready for shop use? The instrument is delivered in a protective case with the measuring rods included, making it ready for immediate use in inspection and production. Does the unit include a ratchet stop and what is its benefit? A ratchet stop is fitted to provide a consistent measuring force, which improves repeatability and reduces operator‑dependent variation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge Flat Bridge 100mm, 0.001mm Resolution, RB 4.1 Data Output - Metav IndustryLine
Take advantage of precise 0.001 mm resolution, robust ratchet spindle and digital data output for reliable process integration; these features ensure fast, repeatable depth measurement across workshop and inspection tasks. Order the digital depth gauge directly via Metav Werkzeuge or contact our consultants for application advice. Digital depth gauge M302.171.C — flat bridge, 0–200 mm, 0.001 mm resolution The M302.171.C digital depth gauge is a precision instrument for depth and step measurement in workshop and quality‑control environments, designed with a flat measuring face and a 100 x 16 mm bridge for stable support Digital resolution 0.001 mm for fine readings RB 4.1 data output for digital logging Ratchet spindle for reproducible measuring force Easy replacement of measuring inserts Precision and repeatability for everyday workshop measurement The instrument delivers 0.001 mm display resolution combined with an overall accuracy of 0.006 mm, which makes it suitable for standard industrial inspection and machining tasks. The fine digital readout and ratchet spindle reduce operator‑induced variation by ensuring consistent contact pressure on the measured surface, resulting in reproducible depth and step readings. This balance of resolution and mechanical control supports efficient in‑process checks without overburdening routine workflows. Seamless data capture for traceable documentation Equipped with an RB 4.1 data output and a clear digital display featuring ON/OFF, ABS/INC, UNIT and SET functions, the gauge integrates easily into digital logging systems and quality documentation processes. The available data interface simplifies transfer of measured values to inspection software or SPC systems, speeding up reporting and reducing manual transcription errors. Traceable electronic capture helps maintain production transparency and supports quality management routines. Designed for practical handling and maintenance The flat measuring faces and a 100 x 16 mm bridge provide stable seating during measurement of recesses and steps, while the device’s design allows for easy replacement of measuring inserts, reducing downtime when adapting the tool for different tasks. The instrument is supplied with a set of measuring rods (8 pieces) to extend functionality immediately upon receipt. Its configuration is aimed at machinists and quality engineers who prioritise efficient tool changes and steady handling in routine use. Application context and suitability With a measuring range of 0–200 mm, this depth gauge falls into the standard class for metrology tools, covering the most common workshop and metalworking requirements where a compromise between reach and stiffness is important. Typical applications include depth checks on milled pockets, step measurements on housings and verification of set‑up features on jigs and fixtures. The combination of mechanical stability and fine digital resolution suits both shopfloor measurements and incoming inspection tasks. For reliable depth measurement choose Metav IndustryLine's M302.171.C digital depth gauge and contact Metav Werkzeuge in Emmerich for supply, further technical specifications or advice on system integration Technical data Article number: M302.171.C GTIN: 4054469115122 Brand: Metav IndustryLine Data output: RB 4.1 Display functions: ON/OFF, ABS/INC, UNIT, SET Facts Measuring range: 0–200 mm Resolution: 0.001 mm Accuracy: 0.006 mm Bridge: 100 x 16 mm Measuring faces: flat Special features Ratchet spindle for repeatable force Digital instrument (electronic display) Easy replacement of measuring inserts Accessories included: measuring rod, 8 pcs Eclass: 21170350 / ETIM: EC003590 FAQ What measuring range does this depth gauge cover? The M302.171.C covers a measuring range of 0–200 mm, making it a standard‑range instrument for typical workshop and inspection tasks. How small is the smallest readable increment on the display? The digital display provides a resolution of 0.001 mm, allowing fine increments to be read directly from the instrument. Can measurement data be exported to a PC or data logger? Yes, the gauge supports RB 4.1 data output for connection to data collection systems and logging equipment. Is the measuring force controlled to improve repeatability? The integrated ratchet spindle helps to ensure a reproducible measuring force, improving repeatability in routine measurements. What accessories are supplied with the instrument? The M302.171.C is supplied with measuring rods (8 pieces) to extend its practical range and usability in different measurement scenarios. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Setting Gauge Metric 60 - Microtech Metrology
Take advantage of a compact 200 mm metric reference that combines reliable reproducibility with straightforward workshop integration; the Metric 60 specification ensures compatibility with common metric setups and test fixtures. Benefit from consistent set‑ups and reduced adjustment time; order the setting gauge directly via Metav Werkzeuge or ask our consultants if needed. Setting Gauge — 200 mm, Metric 60 (Microtech Metrology) The Setting Gauge is a metric reference accessory designed for precise instrument set‑up and repeatable measuring routines in workshops and inspection benches. 200 mm nominal length Metric 60 compatibility Precision reference for instruments Accessory for measuring devices Consistent setups with a compact metric reference A compact metric reference gauge delivers repeatable starting points for routine set‑ups and verification tasks. The 200 mm nominal length fits standard caliper and fixture ranges, providing a stable datum without occupying excessive bench space. By using a clearly defined metric standard such as Metric 60, workshops can reduce variability in instrument adjustments and accelerate changeovers between jobs. This measurable consistency supports production quality and faster throughput without additional process complexity. Integrates directly into common metrology workflows Designed as an accessory for measuring devices, this reference can be used when setting up comparators, test fixtures or as a quick verification artefact on the shop floor. The Metric 60 designation simplifies matching the gauge to metric systems and fixturing arrangements commonly found in engineering shops. As a compact calibration aid, it assists technicians and quality personnel to maintain traceable baselines for routine checks, helping to avoid unnecessary instrument downtime and ensuring parts remain within specification tolerances. Practical advantages for everyday inspection and maintenance The reference gauge is useful for initial instrument alignment, routine verification of measuring equipment and as a stable workshop datum for production checks. Its straightforward form factor supports rapid placement and repeatable contact points, which contributes to a reduction in set‑up time and a smoother inspection cycle. For procurement and inventory, the item is listed under the measuring‑instrument accessories category and carries a unique GTIN and article number for traceable stock management within supply chains and quality systems. Choose the Microtech Metrology 200 mm setting gauge with Metric 60 for dependable metric references — contact Metav Werkzeuge in Emmerich for procurement advice and delivery from our European quality hub. Technical data Article number: 110710020 GTIN: 4061905459221 Manufacturer: Microtech Metrology Core measurements Nominal length: 200 mm Category: Accessories (measuring instruments) Special features Metric 60 FAQ What is the nominal length of this reference gauge? The nominal length is 200 mm as stated for the Microtech Metrology setting gauge (SKU 110710020). Is this item intended for instrument set‑up or final calibration? This setting gauge serves as a reference for instrument set‑up and routine verification; final calibration steps depend on the laboratory procedure applied to the measuring device. Which workflows benefit most from a Metric 60 reference? Metric 60 compatibility makes the gauge suitable for metric fixturing, caliper set‑ups and bench verification routines in machining, inspection and small‑batch production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200–225 mm Digital Micrometer 0.001 mm Resolution Ratchet Spindle, Matt Chrome Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of high-resolution 0.001 mm measurement, a secure ratchet thimble for repeatable contact pressure and a robust matt‑chromed measuring drum to keep inspection cycles consistent; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital Micrometer M302.262 — 200–225 mm, 0.001 mm resolution (Metav IndustryLine) A Digital Micrometer M302.262 for precise external measurements in workshop and quality‑control environments, optimised for components within the 200–225 mm measuring range High-resolution 0.001 mm digital readout Ratchet thimble for repeatable contact pressure Matt-chromed measuring drum and satin finish Hardened measuring faces Ø6.5 mm Precise readout that speeds inspection and reduces rework The instrument delivers a 0.001 mm digital resolution, enabling confident decisions in serial inspection and first‑piece checks. The clear digital display with ON/OFF/SET and ABS/INC/UNIT keys supports both absolute and incremental readings, eliminating manual interpolation and shortening measuring cycles. Designed for standard workshop tasks within the 200–225 mm range, the device provides a reliable balance between reach and handling, helping to reduce throughput bottlenecks in quality control. Robust mechanics for repeatable contact and long-term stability A ratchet thimble ensures a consistent measuring force, which reduces operator‑induced variation and improves reproducibility across repeated measurements. The frame is painted for corrosion protection while the measuring drum is matt‑chromed, offering wear resistance and smooth operation. With hardened measuring faces Ø6.5 mm, the tool withstands routine use on shafts and bosses, maintaining form and accuracy even under demanding shop conditions. Practical compliance and workflow benefits for inspection stations Manufactured to DIN 863, this micrometer matches established workshop standards and integrates easily into existing inspection routines. The combination of a digital absolute mode and incremental function supports common measurement tasks such as step, outside and depth checks when used alongside appropriate fixtures. The instrument’s clear labelling and tactile controls reduce training time for operators and accelerate data capture during routine quality checks. Operational advantages and recommended applications Built for external measurement of turned parts, flanges and large fittings, the unit is particularly suited to production environments and maintenance shops requiring repeatable high‑precision checks. The solid construction and ergonomic thimble support fast, fatigue‑resistant operation, while the digital readout minimises transcription errors. For traceable inspection processes, the micrometer complements standard metrology toolsets and serves as a dependable hand‑held instrument for incoming inspection and in‑process control. Contact Metav Werkzeuge today to secure this Metav IndustryLine digital micrometer for reliable, high‑resolution measurements or speak with our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for application guidance Technical data Article number: M302.262 GTIN: 4054469151809 Category: Messschrauben (Micrometers) Standard: DIN 863 Facts Measuring range: 200–225 mm Resolution: 0.001 mm Measuring faces Ø: 6.5 mm Tariff number: 90173000 Special features Frame painted; measuring drum matt‑chromed Digital display with ON/OFF/SET and ABS/INC/UNIT keys Ratchet thimble for consistent contact force Hardened measuring faces Digital operation FAQ What is the measurement resolution of this micrometer? The M302.262 offers a digital resolution of 0.001 mm, providing fine discrimination for detailed external measurements. Which measuring range does the instrument cover? The micrometer covers the 200–225 mm range, making it suitable for medium to large components in production and maintenance work. Does the device meet recognised standards? Yes, the M302.262 is manufactured to DIN 863, aligning it with common workshop metrology requirements. What mechanical features assist repeatability? A ratchet thimble is incorporated to ensure uniform contact pressure, reducing operator influence on measurement results when using the Metav IndustryLine micrometer. For which applications is this micrometer best suited? The instrument is intended for external measurements on shafts, flanges and turned parts where repeatable, high‑resolution checks are required in workshop and quality environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225 mm Ratchet Thimble Micrometer 0.01 mm, Blue Powder Coating, Matt Chrome Thimble, DIN 863 - Metav IndustryLine
Take advantage of precise, repeatable readings thanks to the ratchet stop and 0.01 mm graduation together with a robust, powder‑coated frame for reliable workshop performance; order directly via Metav Werkzeuge or consult our specialists for specification support. M304.416 — Metav IndustryLine outside micrometer, 200–225 mm, 0.01 mm ratchet The M304.416 is an outside micrometer engineered for accurate external dimension measurement in metalworking and quality control applications; suitable for routine inspection and workshop use. 200–225 mm measuring range 0.01 mm graduation for fine readings Ratchet stop for consistent measuring pressure Blue powder‑coated frame with chrome drum Consistent, repeatable external measurements The analogue graduation of 0.01 mm and the integrated ratchet stop create highly repeatable readings by limiting operator‑induced force variations. The spindle advances with a 0.5 mm pitch, providing tactile, predictable engagement for incremental setting and fine adjustment. Compliance with DIN 863 ensures the instrument meets recognised workshop standards for mechanical micrometers, while the matt‑chrome measuring drum combines clear scale visibility with durable surface wear properties. These aspects together reduce measurement scatter and support standardised inspection routines on production lines and in inspection rooms. Rugged construction for daily workshop demands Built around a blue powder‑coated frame and a matt‑chromed measuring drum, the micrometer resists corrosion and visible wear in industrial environments. The measuring faces are included and finished for stable contact geometry, the spindle diameter of 6.5 mm adds stiffness at the contact point, and the overall design is tuned for handling heavy‑duty use without sacrificing feel. As an analogue instrument, this micrometer is straightforward to read and maintain, making it suitable for bench‑level quality checks and repetitive dimensioning where mechanical reliability and quick operation are priorities. Designed for inspection workflows and traceability The micrometer supports standard inspection workflows: clear graduations speed up data capture and the ratchet stop promotes consistent force application across multiple operators. The instrument is classified for external measurements in the 200–225 mm range, making it appropriate for medium‑sized components and assemblies in toolmaking, machining and maintenance shops. Delivered as a workshop‑ready instrument, this model integrates with established metrology stations and complements digital or manual record‑keeping practices. Metav’s position as a precision partner ensures access to documentation and product information for procurement and quality teams. Contact Metav Werkzeuge for detailed technical matching or to request application advice for this Metav IndustryLine outside micrometer (M304.416) Technical data Article number: M304.416 GTIN: 4054469116952 Category: Messschrauben (outside micrometer) Manufacturer: Metav IndustryLine Core data Measuring range: 200–225 mm Graduation / resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Standard: DIN 863 Analog instrument Special features Ratchet stop for defined measuring pressure Frame painted (powder coating), measuring drum matt chrome Measuring faces included Suitable for routine workshop and inspection use FAQ What level of accuracy can be expected from this micrometer? The Metav IndustryLine outside micrometer M304.416 features a 0.01 mm graduation and is manufactured to DIN 863 tolerances, offering the repeatability and mechanical precision expected in standard workshop measurements. How does the ratchet stop improve measurement quality? The ratchet stop on the M304.416 limits applied force, ensuring consistent contact pressure and reducing variation between operators for more reproducible external measurements. Are the measuring faces hardened or treated for wear? The measuring faces are supplied as part of the instrument and the measuring drum is matt‑chrome plated; the finish supports long‑term stability and readable graduations under regular workshop conditions. Is this micrometer suitable for heavy machining components? With a measuring range of 200–225 mm and a robust frame, the instrument is suited to medium‑sized components in machining and toolmaking, offering a balance of reach and rigidity for everyday inspection tasks. Can the micrometer be integrated into inspection routines alongside digital systems? Yes; the clear analogue graduations and stable mechanical behaviour of the M304.416 make it compatible with established inspection workflows and manual data capture that often accompany digital quality‑management systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225mm Micrometer With 35mm Anvil Plates, Touchscreen Display, Wireless+USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise external measurement with 0.008 mm resolution together with integrated data transfer and a certified calibration workflow for reliable quality control; order the instrument via Metav Werkzeuge or request technical advice from our consultants. Outside Micrometer — digital touchscreen, 200–225 mm, Microtech Metrology A digital outside micrometer designed for accurate external measurements in workshop and laboratory environments, covering the 200–225 mm measuring range for standard metalworking tasks. Digital touchscreen 1.54" display ISO 17025 calibrated with certificate Wireless plus USB data output 35 mm disc measuring faces Minimise rework with consistently tight tolerances The micrometer delivers a measured accuracy of 0.008 mm, making it suitable where sub‑0.01 mm control reduces scrap rates and rework. The digital touchscreen 1.54" offers clear numeric read‑out and direct status feedback, while the metal‑tooled spindle and flat 35 mm disc anvil ensure a stable contact geometry that lowers measurement scatter. For production lines and incoming inspection, the instrument provides a robust metrological basis that supports repeatable decision‑making and shorter inspection cycles. Traceability and certified calibration for audit-ready documentation Calibration is performed and supplied in accordance with ISO 17025, including an official calibration certificate: a decisive advantage for quality systems that require documented traceability. The delivered certificate confirms measurement capability and permits direct integration into existing inspection records. Laboratories and quality managers benefit from documented uncertainty budgets and a recognised standard for inter‑laboratory comparability, simplifying compliance during audits and supplier assessments. Streamlined data capture for process control and SPC Equipped with Wireless and USB data outputs, the instrument enables straightforward capture of measurement data into statistical process control systems or digital logbooks. The combination of immediate digital readout and remote data transfer reduces transcription errors and speeds up data flow to MES or QA software. For production engineers seeking tighter process feedback loops, this connectivity supports quicker corrective actions and traceable measurement histories. Designed for repeatable contact and practical handling A non‑rotating spindle minimises wear patterns and helps produce consistent surface contact, while the disc‑shaped measuring faces distribute contact pressure evenly on broader workpiece features. The 200–225 mm measuring range places this micrometer in the standard class for machine and metalwork applications, offering a practical balance of reach and rigidity for components such as housings, shafts and precision fittings. The digital format combines tactile micrometer mechanics with modern readout convenience for everyday inspection tasks. Contact Metav Werkzeuge today to discuss integration, request the ISO 17025 calibration certificate with delivery, or place an order for the Microtech Metrology outside micrometer (SKU 110782257) via Metav Werkzeuge for fast, reliable supply from Emmerich. Technical data Article number: 110782257 GTIN: 4061905457524 Manufacturer: Microtech Metrology Facts Measuring range: 200–225 mm Accuracy: 0.008 mm Display: Touchscreen 1.54" Data output: Wireless + USB Special features ISO 17025 calibration certificate included 35 mm disc measuring faces Non‑rotating spindle Digital micrometer format FAQ What measuring range does this micrometer cover? The Microtech Metrology outside micrometer covers a measuring range of 200–225 mm (SKU 110782257), classified as a standard range suitable for general machine‑shop measurements. Is a calibration certificate supplied with the instrument? Yes. The micrometer is delivered with an ISO 17025 calibration certificate, confirming traceability and suitability for accredited quality systems. How is measurement data exported from the device? Measurement values can be transmitted via Wireless connection or through the USB port for direct capture into quality control software and process documentation. What makes the measuring faces suitable for workpieces? The 35 mm disc measuring faces provide broad, even contact that reduces local deformation and improves repeatability on larger external features. Can this instrument be used for shop‑floor production control? Designed for workshop and laboratory use, the digital micrometer provides the accuracy and connectivity required for production control and SPC tasks, with the added assurance of ISO 17025 calibration. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200–300 mm Micrometer Caliper Set With Setting Gauge, Ratchet, Blue Powder Coating, Case - Metav IndustryLine
Take advantage of a robust workshop kit that combines repeatable precision, durable blue powder-coated frames, and simple handling for fast measurements. The set of four outside micrometers covers the 200–300 mm range with fine spindle control and a protective case; order the set directly via Metav Werkzeuge or consult their specialists for technical advice. Metav IndustryLine M304.422 – Outside micrometer set, 200–300 mm, ratchet stop The Metav IndustryLine M304.422 is a four-piece set of analogue outside micrometers designed for shop‑floor use, covering the 200–300 mm measuring range with ratchet stops and hardened measuring faces for repeatable results Range 200–300 mm in four steps Blue powder-coated frames for corrosion resistance Ratchet stop for consistent measuring force Supplied in a protective case Dependable precision for everyday workshop control This micrometer set was designed to deliver consistent, repeatable measurements across medium-sized components. Classified for the workshop standard range of 200–300 mm, the four gauges extend reach while keeping handling manageable; each instrument incorporates hardened measuring faces for wear resistance and a mechanical reading graduated to 0.01 mm, making the set suitable for machine‑shop tolerance checks and fixture setup. Compliance with DIN 863 underlines the instruments’ suitability for routine dimensional control, so inspection tasks become more reliable and traceable. Built for practical handling and low downtime Durability and operator ergonomics are central to the design. The frames are blue powder-coated to resist chips and corrosion, while the measuring drum matt chrome-plated finish improves legibility and wear resistance. A ratchet stop ensures a constant measuring force, reducing variation from manual operation, and the spindle geometry (6.5 mm spindle body with spindle pitch 0.5 mm) balances stiffness with fine adjustment. The analogue construction keeps maintenance straightforward and avoids battery dependencies, which is advantageous for continuous shop use. Complete set for safe transport and workshop readiness Delivered as a set of four gauges with matching adjustment standards (200 / 225 / 250 / 275 mm), the package is arranged for straightforward storage and transport in a sturdy case. The robust packaging and overall weight (approx. 12.3 kg for the set) reflect a workshop solution intended for frequent use and movement between benches. The combination of protective case, hardened faces and precision spindles reduces service intervals and keeps inspection moving — a practical investment for suppliers, toolrooms and production lines that demand dependable dimensional control. For robust, shop-ready precision choose the Metav IndustryLine M304.422 micrometer set and contact Metav Werkzeuge for availability or bespoke advice — Metav Werkzeuge in Emmerich is ready to support specification and delivery. Technical Data Article number: M304.422 GTIN: 4054469117010 Manufacturer: Metav IndustryLine Norm: DIN 863 Core specifications Measuring range: 200 mm – 300 mm Resolution / reading: 0.01 mm Spindle diameter: 6.5 mm Spindle pitch: 0.5 mm Pieces per set: 4 Weight: 12.3 kg Materials & special features Frame painted, blue powder-coated Measuring drum matt chrome-plated Hardened measuring faces Ratchet stop (constant force) Analogue micrometers Adjustment gauges included: 200 / 225 / 250 / 275 mm Supplied in protective case FAQ Are these micrometers suitable for workshop calibration tasks? Yes. The Metav IndustryLine M304.422 set is designed for workshop calibration and routine dimensional control, complying with DIN 863 and equipped with hardened measuring faces for durable performance. What measuring steps are included in the set? The set contains four outside micrometers covering the 200–300 mm range and includes adjustment gauges at 200, 225, 250 and 275 mm for verification and quick checks. How does the ratchet stop help measurement quality? The ratchet stop provides a repeatable measuring force that reduces operator‑dependent variation; fitted to each micrometer in the M304.422 set for more consistent results. Is the finish suitable for a busy production environment? Yes. The blue powder‑coated frames and matt chrome‑plated measuring drums resist wear and corrosion, making the set appropriate for frequent shop use. Can the measuring faces be reconditioned or replaced? The micrometers feature hardened measuring faces to extend service life; in case of wear, components can be serviced by qualified workshop maintenance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Crimp Height Micrometer Digital Touchscreen, ISO 17025 Calibrated, IP65 - Microtech Metrology
Benefit from ±0.003 mm measurement accuracy, full ISO 17025 calibration and seamless wireless data transfer for reliable, traceable crimp inspection. The combination of high-resolution reading, robust IP65 protection and a CNC‑machined aluminium housing ensures long‑term stability and simple integration into production systems. Order the instrument directly via Metav Werkzeuge or consult the advisers for specification support. Microtech Crimp Height Micrometre with Colour Touchscreen and Wireless Data A Microtech crimp height micrometre designed for fast, traceable crimp-height inspection and quality control in production and laboratory environments. ISO 17025 calibration certificate included Wireless and USB data output for Industry 4.0 IP65 protection for shop-floor use CNC-machined aluminium housing for durability Traceable precision for production and QA The instrument delivers a reading resolution of 0.0001 mm and a verified accuracy of 0.003 mm, which supports repeatable decisions in incoming inspection and process control. Supplied with an ISO 17025 calibration certificate, the device enables documented traceability for audit and certification requirements. The high resolution and calibrated status reduce rework and dispute time by providing objective evidence of crimp geometry. Built for digital workflows and Industry 4.0 Equipped with a 1.5" colour touchscreen, onboard memory for 2000 values and multiple data modes, the instrument is prepared for automated data capture. Data transfer options include wireless to the MDS app, Wireless HID, USB HID and an optional Modbus RTU interface for direct PLC or SCADA connections. These features mean measured values can be collected, stored and analysed without manual transcription, improving documentation speed and lowering the chance of human error. Robust design that endures shop-floor conditions The tool features a CNC‑machined aluminium housing and an IP65 rating, making it resistant to dust and splash exposure typical in production areas. A friction ratchet and a rotating measuring spindle ensure consistent contact force and reliable readings over thousands of cycles. The measuring faces comprise both point and flat geometries (0.75 × 6.5 mm) to suit a range of crimp profiles, while the solid construction reduces thermal and mechanical drift. Practical handling and measurement workflow As a compact instrument in the micro class (measuring range 0–20 mm), it offers excellent stiffness and tactile control for fine work at the bench while still providing enough range for most crimping applications. The integrated memory manager supports folder organisation and statistics mode, enabling quick batch checks and trend tracking. A formula and temperature‑correction function allow compensating measurements where environmental influences are relevant, simplifying everyday use for operators and inspectors. Contact Metav Werkzeuge today for a specification match or to arrange a technical consultation on how this Microtech instrument fits into existing measurement processes. Technical Data Article number: 110550258 GTIN: 4061905040887 Manufacturer: Microtech Metrology SKU: 110550258 Facts Measuring range: 0–20 mm Accuracy: 0.003 mm Resolution/reading: 0.0001 mm Display: 1.5" colour touchscreen Memory capacity: 2000 values Special features CNC-machined aluminium housing IP65 protection Wireless + USB data output (Wireless HID, USB HID, MDS app) Optional Modbus RTU (RS-485) ISO 17025 calibration certificate included (Ilac MRA) Measuring faces: point and flat 0.75 × 6.5 mm Friction ratchet Rotating measuring spindle On-line graphic, Max/Min, Go/NoGo, formula, timer, linear and temperature correction Statistics mode and folder system for measured value management FAQ What level of accuracy can be expected from this crimp-height instrument? The crimp height micrometre from Microtech Metrology achieves an accuracy of 0.003 mm, with a reading resolution of 0.0001 mm, suitable for precise crimp inspection and laboratory checks. Is the instrument ready for immediate traceable use out of the box? Yes, the device is delivered with an ISO 17025 calibration certificate, so it arrives fully calibrated and ready for traceable measurements in quality management systems. How can measured values be transferred to a PC or analysis system? Measured values can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, USB HID, or through the optional Modbus RTU interface for direct industrial integration. Can the micrometre withstand use on a busy shop floor? The instrument's IP65 protection and CNC‑machined aluminium housing provide resistance to dust and splashes, while the friction ratchet ensures consistent contact force for repeatable readings in production environments. What types of crimp profiles can be measured with this micrometre? The tool includes both point and flat measuring faces (0.75 × 6.5 mm), allowing measurement of a wide range of crimp geometries commonly found in cable, terminal and connector production. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20–35mm Three-Point External Micrometer 0.01mm Reading Carbide Faces Ratchet, Supplied in Case - Metav IndustryLine
Combine carbide measuring faces, a fine 0.01 mm reading and a ratchet stop to secure reproducible results on non‑round profiles; ideal where repeatable, high‑accuracy external measurements are required. Order the Metav IndustryLine M309.022 directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine M309.022 — 3‑Point External Micrometer (20–35 mm, 0.01 mm) The Metav IndustryLine M309.022 is a three‑point external micrometer designed for precise measurement of triangular and five‑sided components in fine mechanical and workshop environments. *Carbide measuring faces for long service life *0.01 mm reading with 0.006 mm accuracy *Ratchet stop ensures consistent measuring force *Designed for triangular and five‑sided profiles Exact measurement for non‑round profiles Three‑point measurement geometry converts irregular edges into a single, reproducible diameter value, making this instrument especially suited for triangular or pentagonal workpieces. The device offers a measuring range of 20–35 mm, placing it in the Mikro category (micro range for up to 100 mm) where stiffness and short anvils are advantages. The analogue scale provides a 0.01 mm reading while the verified measuring performance lists an accuracy of 0.006 mm, so inspection routines benefit from both clear readability and fine resolution. The integrated ratchet stop helps to apply a uniform measuring force, reducing operator‑related scatter. Built for workshop durability and repeatability The micrometer combines a lacquered frame with a matt‑chromed measuring drum, balancing corrosion resistance and low glare for consistent reading under workshop lighting. Carbide measuring faces resist wear from repeated contact with hard materials, extending service life and maintaining measurement integrity over time. The ergonomic frame and tactile ratchet give repeatable handling for series checks, supporting efficient quality control in small‑batch production or repair work without complex setup. Straightforward integration into inspection processes As a mechanical, analogue instrument, this micrometer is quick to deploy for routine checks and on‑the‑bench inspections. A 20 mm setting datum is available for reference during zeroing or comparative checks, which simplifies daily calibration routines. Its function is complementary to digital micrometres where traceable electronic output is required; here the emphasis is on robust, low‑maintenance performance and reproducible readings of non‑cylindrical profiles. The construction and materials suit use across general metalworking and fine mechanics where three‑point external measurement is the preferred method. Choose the Metav IndustryLine M309.022 for reliable three‑point external measurements and contact Metav Werkzeuge in Emmerich for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M309.022 GTIN: 4054469117577 eClass: 21170328 ETIM: EC003590 Core specifications Measuring range: 20–35 mm Resolution / reading: 0.01 mm Stated accuracy: 0.006 mm Setting datum: 20 mm Instrument type: analogue / mechanical Materials & features Frame: lacquered Measuring drum: matt‑chrome plated Measuring faces: carbide (hardmetal) Ratchet stop for constant measuring force Suitable for triangular and five‑sided profiles Tariff code: 90173000 FAQ What kinds of components is this micrometer intended for? The Metav IndustryLine M309.022 three‑point external micrometer is intended for triangular and five‑sided workpieces where a single reproducible external dimension is required. What is the measuring range and reading capability? The instrument covers 20–35 mm with an analogue reading of 0.01 mm and a stated accuracy of 0.006 mm. Does the micrometer use wear‑resistant contacts? Yes, the measuring faces are made of carbide to ensure long service life and stable measurements under frequent use. How does the ratchet stop improve measurement consistency? The ratchet stop limits the applied torque so that each measurement is made with a consistent contact force, reducing variability between operators. Can this micrometer be used in standard workshop inspection routines? Its robust construction, simple analogue operation and three‑point geometry make it suitable for routine workshop checks and small‑batch quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2200-2400mm Bench Micrometer Sub‑Micron Digital Touchscreen, ISO17025 Calibrated, Wireless/USB - Microtech Metrology
Take advantage of the extra‑long 2,200–2,400 mm measuring range, wireless and USB data transfer, and the included ISO 17025 calibration certificate for reliable, traceable inspection of large components. Order the frame micrometer directly via Metav Werkzeuge or ask our consultants for tailored advice. Frame micrometer 2,200–2,400 mm by Microtech Metrology — extra‑long digital micrometer with wireless data output The frame micrometer is an extra‑long, digitally read micrometer designed for large‑format dimensional checks in heavy machining, vessel and pipe work, and large tooling assemblies. Extra‑long 2,200–2,400 mm measuring range Wireless and USB data output for Industry 4.0 workflows ISO 17025 calibration certificate included CNC‑machined aluminium housing for high stiffness Reproducible measurement across large components This instrument addresses the specific challenge of measuring large workpieces: an extra‑long 2,200–2,400 mm measuring range paired with substantial frame stiffness reduces deflection over the span and improves repeatability when compared with improvised methods. The large Ø50 mm measuring faces distribute contact forces reliably and the substantial mass of the assembly (approx. 27 kg) stabilises the tool during a measurement cycle. Classified as an extra‑long micrometer, it is intended where long‑span accuracy matters — for example in heavy machining, pipe fabrication or large jig and fixture inspection — offering a consistent reading method that replaces less repeatable tape or gauge approaches. Digital connectivity that fits modern inspection chains Data handling is engineered for productivity: the instrument provides wireless and USB HID transfer modes, a dedicated Memory Manager with 2,000 values, and multiple data modes such as 2D graphing, probe mode and on‑line graphic display. These functions enable direct integration into measurement workflows and statistical traceability, reducing manual transcription errors and accelerating reporting. An optional MODBUS RTU interface (RS‑485) is available for plant‑level integration where real‑time PLC connectivity is required, while the local colour touchscreen display shows readings clearly at the point of inspection. Traceable calibration and robust mechanical design Delivered fully calibrated with an ISO 17025 calibration certificate (Ilac MRA), the micrometer includes traceable documentation for formal quality systems and audit trails. The CNC‑machined solid aluminium housing provides mechanical integrity and thermal stability; combined with the device’s specified accuracy (0.036 mm) and measurable resolution (0.0001 mm), the unit balances long‑range capability with practical inspection accuracy suitable for heavy‑duty use. The included calibration certificate ensures measurement results are auditable and accepted by quality departments. Practical deployment and workshop integration As a purpose‑built solution for large parts, the instrument arrives ready for immediate integration: predefined data transfer modes support Windows, Android, iOS and macOS applications and allow stand‑alone logging or networked collection. The device’s feature set — including go/no‑go, max/min, linear and temperature correction — simplifies routine checks and reduces setup time for recurring inspections. For workshops seeking reliable throughput with documented traceability, this micrometer forms a strong, service‑ready basis for regular production checks and incoming inspection. Contact Metav Werkzeuge today to discuss specification matching, delivery options from Emmerich and to arrange documentation for your quality system requirements Technical Data Article number: 110182408 GTIN: 4061905039928 Manufacturer: Microtech Metrology Measuring range: 2,200–2,400 mm Measuring faces: Ø50 mm Data output: Wireless + USB Display: Colour 1.5" touchscreen Calibration: ISO 17025 certificate included Facts Weight: 27 kg Resolution (display): 0.0001 mm Stated accuracy: 0.036 mm Memory: 2,000 values SKU: 110182408 ECLASS: 21170328 Special features Wireless MICROTECH instrument connection and synchronization MICS system with sub‑micron support and on‑line graphics 2D mode, 2D graph, probe mode and compensation features Memory manager with folders and statistics mode Optional MODBUS RTU (RS‑485) for industrial connections CNC‑machined solid block aluminium housing Functions: Go/NoGo, Max/Min, Formula, Timer, Linear and Temperature correction FAQ What is the exact measuring range of the micrometer? The frame micrometer supports a measuring range from 2,200 mm to 2,400 mm, making it suitable for extra‑long measurements of large components. Is the instrument supplied calibrated for formal quality systems? Yes — the micrometer is delivered with a full ISO 17025 calibration certificate, providing traceability and audit‑ready documentation from Microtech Metrology. How can measurement data be transferred to inspection software? Data can be transferred wirelessly or via USB HID, with four data transfer modes available and compatibility with Windows, Android, iOS and macOS systems; an optional MODBUS RTU output supports PLC integration. What level of resolution and accuracy does the device provide? The display resolution is 0.0001 mm; the stated instrument accuracy is 0.036 mm, which reflects the compromise between long‑range capability and repeatable field measurements for large parts. Is the micrometer suitable for industrial, continuous use? Yes — the robust CNC‑machined aluminium housing, large contact faces and integrated data management make this instrument suitable for workshop and production‑line inspection of large assemblies. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2200-2400mm Digital Micrometer Caliper With Friction Ratchet, IP65, ISO 17025 Calibrated - Microtech Metrology
Benefit from a combination of wide-range measurement capability, IP65-rated digital electronics and an ISO 17025 calibration certificate to ensure reliable, traceable measurements across large components; order the instrument directly via Metav Werkzeuge or consult our specialists for advice. Microtech Metrology digital micrometer — Extra‑Long range with IP65 protection Microtech Metrology digital micrometer for heavy‑duty workshop and production measurements in large assemblies Wide measurement range for large components IP65-rated digital head for workshop use Includes setting rods and ratchet stop Supplied with ISO 17025 calibration certificate Accurate measurement over long spans for production control This instrument is designed for reproducible assessment of large components, covering a measuring span of 2,200–2,400 mm classified as Extra‑Long. The substantial mass of the gauge (27 kg) and robust measuring faces Ø50 mm increase profile stiffness and decrease bending under load, resulting in stable readings across the full travel. For production and quality control environments where repeatability over metres matters, the construction reduces measurement uncertainty and simplifies alignment of large shafts, housings or fixtures. Digital clarity and environmental robustness for workshop use Equipped with a digital readout at 0.001 mm resolution and an IP65-rated measuring head, the instrument combines fine resolution with protection against dust and jets of water. The integrated ratchet stop and supplied setting rods help control measuring force and guarantee consistent contact pressure, lowering operator influence on results. The electronic display accelerates readout and data capture, while the rugged sealing allows use in common shop-floor conditions without compromising instrument lifetime. Traceable calibration and measurable confidence in QA workflows Delivered with an ISO 17025 calibration certificate, the device supports formal traceability and audit requirements; the included certificate documents measurement performance and enables direct integration into quality management systems. The declared accuracy of 0.045 mm establishes the instrument's suitability for end‑of‑line checks and component verification. As a digital, wide‑range measuring tool from Microtech Metrology, it bridges the gap between laboratory traceability and on‑shop practicality, reducing rework and inspection bottlenecks. For precision over very long measuring ranges, request a specification review or place an order with Metav Werkzeuge — Metav Werkzeuge provides product advice and supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 110172401 GTIN: 4061905039447 Manufacturer: Microtech Metrology Weight: 27 kg IP rating: IP65 Resolution: 0.001 mm Accuracy: 0.045 mm Measuring faces: Ø50 mm Facts Measuring range: 2,200–2,400 mm Resolution (display): 0.001 mm Declared accuracy: 0.045 mm Mass: 27 kg Special features Digital display Ratchet stop Setting rods included Supplied with ISO 17025 calibration certificate IP65 protection Wide‑range micrometer for large components FAQ What measuring range does this micrometer cover? The Microtech Metrology digital micrometer covers a measuring span of 2,200–2,400 mm and is intended for extra‑long measurement tasks (SKU 110172401). Is the device suitable for shop‑floor use? Yes, the instrument features an IP65‑rated digital head and robust measuring faces, making the micrometer suitable for typical workshop environments. Does the micrometer come calibrated? A calibration certificate is supplied; the micrometer is delivered with an ISO 17025 calibration certificate confirming traceable verification. What resolution and declared accuracy can be expected? The digital readout provides 0.001 mm resolution and a declared accuracy of 0.045 mm for the specified measuring range. Are any accessories included for installation or setup? Setting rods and a ratchet stop are included to assist correct measuring force and initial adjustment of the micrometer. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
225 mm Setting Gauge For Micrometers With Thermal Insulation, Accuracy ±3.5 µm - Metav IndustryLine
Take advantage of a compact, laboratory-grade reference that combines high reproducibility and temperature compensation for reliable micrometer setup. The 225 mm nominal length and ±0.0035 mm accuracy (≈ 3.5 µm) ensure consistent calibration of outside micrometers, while integrated thermal protection reduces measurement drift during routine use — order via Metav Werkzeuge or contact the technical consultants for application advice. Setting gauge for micrometers M304.317 — 225 mm reference gauge, ±0.0035 mm accuracy, Metav IndustryLine The Setting Gauge for Micrometers M304.317 is a precision reference bar intended for setting and checking outside-measuring micrometers in workshops and metrology labs, offering a stable 225 mm reference with flat measuring faces for repeatable results 225 mm nominal length ±0.0035 mm accuracy Flat measuring faces Integrated thermal protection Reliable reference for precise micrometre calibration A solid reference bar delivers the foundation for repeatable measurements. The compact reference offers a 225 mm nominal length combined with ±0.0035 mm declared accuracy, which corresponds to roughly 3.5 µm. This level of precision reduces setup uncertainty when adjusting outside micrometres and supports consistent part inspection. The flat measuring faces minimise contact variability, making the standard well suited to both workshop and laboratory environments where reproducibility matters. Temperature stability that preserves measurement integrity Thermal effects are a common source of error in length standards. The supplied item features thermal protection, which mitigates short-term temperature influences during handling and brief exposure to ambient changes. Reduced thermal drift means fewer false rejections and less rework, improving throughput in calibration routines. For everyday calibration tasks this stabilising function directly translates into lower process variance and more reliable traceability chains. Compact design for routine use and easy handling Weighing 0.3 kg, the reference is easy to position and manipulate on a workbench or within a calibration jig without compromising stiffness. The flat measuring faces provide a clear seating surface for outside micrometres, simplifying alignment and reducing operator-induced error. As an accessory-class reference, the gauge integrates smoothly into existing metrology workflows and complements laboratory standards by offering a practical compromise between range and handling convenience. For consistent metrology results and practical workshop calibration, contact Metav Werkzeuge to secure the Metav IndustryLine setting gauge M304.317 and discuss suitability for specific micrometre families Technical Data Article number: M304.317 GTIN: 4054469116686 Manufacturer: Metav IndustryLine Facts Nominal size: 225 mm Accuracy: ±0.0035 mm (≈ 3.5 µm) Diameter: 8 mm Weight: 0.3 kg Tariff number: 90173000 Special features Measuring faces: flat Thermal protection included Category: Accessories (metrology) FAQ How precise is the setting gauge for routine calibration tasks? The setting gauge M304.317 offers a declared accuracy of ±0.0035 mm (about 3.5 µm), suitable for high-precision workshop and laboratory checks of outside micrometres. Can this reference be used with all outside micrometres? The reference bar is intended for setting and checking outside-measuring micrometres; compatibility depends on the anvil geometry of the micrometre, but the flat measuring faces support standard contact geometries. Does the thermal protection eliminate the need for temperature-controlled rooms? Thermal protection reduces short-term drift and handling effects, improving stability during use; for highest-accuracy traceable calibrations, a controlled environment remains best practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
225-250mm Digital Micrometer With 35mm Anvil Faces, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 traceability, high measurement fidelity and modern data connectivity for reliable quality control; order the instrument directly via Metav Werkzeuge or contact our consultants for application support. Micrometer — digital micrometer screw gauge with ISO 17025 calibration and Wireless/USB output by Microtech Metrology The Micrometer is a precision digital micrometer screw gauge designed for standard workshop and laboratory dimensional control, combining a high-resolution touchscreen display with wireless and USB data transfer. ISO 17025 calibrated with certificate Wireless and USB data output 1.54" touchscreen display 225–250 mm measuring range 35 mm anvil diameter Consistent, certified precision for routine inspection This digital instrument delivers repeatable measurements thanks to a measured accuracy ±0.008 mm and a fine resolution 0.0001 mm, making it well suited to tasks that require tighter tolerances than common shop gauges. Supplied fully calibrated to ISO 17025, the micrometer arrives with a formal calibration certificate, which simplifies incoming inspection and audit trails. The traceable calibration and stable electronic readout reduce uncertainty compared with manual non-digital gauges and support documented quality procedures. Faster data capture and fewer transcription errors Equipped with Wireless and USB data outputs and a responsive 1.54" touchscreen, this instrument accelerates measurement workflows by enabling direct transfer of values into statistical process control or inspection software. The combination of electronic output and a clear display reduces manual entry, shortens cycle times and lowers the risk of transcription mistakes. The spindle is non-rotating, which assists in consistent contact behaviour, while the generous 35 mm anvil provides a stable contact area for repeatable results on larger diameters and shoulders. Designed for shop and laboratory environments Classified in the Standard range (100–300 mm), the instrument balances reach and stiffness for everyday use in machining, toolrooms and quality departments. Its digital design and robust contact geometry support frequent routine checks, production sample testing and supplier incoming inspection. Built by Microtech Metrology, the device combines practical ergonomics with the metrological features expected in a calibration-capable instrument, helping to streamline inspection routines without sacrificing traceability. Contact Metav Werkzeuge in Emmerich for application advice, ISO 17025 documentation details and procurement of the Microtech Metrology micrometer (SKU 110782507) Technical Data Article number: 110782507 GTIN: 4061905457531 Manufacturer: Microtech Metrology ECLASS: 21170328 ETIM: EC003590 Key Figures Measuring range: 225–250 mm Max measuring range: 250 mm Min measuring range: 225 mm Accuracy: ±0.008 mm Resolution: 0.0001 mm Display: Touchscreen 1.54" Data output: Wireless + USB Special features Measuring faces: 35 mm anvil (Teller) Non-rotating spindle Digital instrument ISO 17025 calibration with certificate SKU: 110782507 FAQ What level of calibration is supplied with the micrometer? The micrometer is supplied fully calibrated to ISO 17025 and includes a formal calibration certificate, ensuring traceability for quality systems. Which measuring range does this instrument cover? The instrument covers the 225–250 mm range, placing it in the Standard class (100–300 mm) suitable for general workshop and machine‑building inspections. How can measurement data be exported? Measurement values from the Microtech Metrology micrometer (SKU 110782507) can be exported via Wireless or USB for seamless integration with inspection software. What makes the contact geometry reliable for repeatable readings? The 35 mm anvil and the non-rotating spindle on this micrometer provide a stable contact area and consistent approach, improving repeatability on larger features and shoulders. Is the display easy to read and operate in workshop conditions? Yes; the 1.54" touchscreen offers a clear, responsive readout and straightforward controls, reducing operator time per measurement and simplifying routine checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
225-250mm Micrometer With Ratchet Stop, 0.005mm Accuracy, ISO 17025 Calibration Certificate Included - Microtech Metrology
High-precision measurement with ±0.005 mm accuracy, a ratchet stop for consistent measuring force and an accompanying ISO 17025 calibration certificate ensure reliable results in production and quality-control environments. Order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Outside Micrometer 225–250 mm — Microtech Metrology large-range outside micrometer with ratchet stop The Outside Micrometer 225–250 mm is a large-range analogue measuring instrument designed for external dimensions on shafts, housings and large components in workshops and inspection rooms. High accuracy ±0.005 mm Resolution 0.01 mm dial Ratchet stop micrometer head Calibration certificate ISO 17025 included Precision where large parts meet tight tolerances This measuring instrument delivers high-resolution readings through an analogue scale with a 0.01 mm graduation, while the overall accuracy of ±0.005 mm places it in the high-precision bracket suitable for demanding quality-control tasks. The benefit of this accuracy is straightforward: fewer rejected parts and quicker go/no-go decisions on production lines. The specified 225–250 mm measuring range covers a segment of large-range workpieces such as stepped shafts or bearing housings, where a standard micrometer would be too short and a tape too imprecise. The design balances reach with stiffness, ensuring repeatable measurements across the specified span. Consistent force and repeatable readings for production use A ratchet stop on the spindle ensures the same measuring force is applied each time, reducing operator-induced variation and supporting reproducible results in batch inspection. This mechanical feature is particularly useful when the instrument is used repeatedly across multiple operators or shifts, as it removes a common human error source. Combined with the micrometer’s robust analogue drive and a clearly marked scale, the instrument supports efficient throughput in workshop routines without sacrificing measurement integrity. Traceable calibration for quality assurance Delivered with a full ISO 17025 (Ilac MRA) calibration certificate, the micrometer arrives ready for integration into documented quality systems and internal audits. The certificate verifies that the instrument has been calibrated in accordance with internationally recognised laboratory standards, giving traceability back to national measurement institutes. For organisations maintaining accredited inspection processes, this eliminates an extra calibration step and demonstrates compliance during supplier assessments or customer audits. Practical applications and handling advantages Engineered for external measurement tasks on medium-to-large components, the instrument suits toolrooms, maintenance shops and incoming inspection. Typical applications include verifying stepped diameters, checking shaft shoulders and confirming mounting diameters on housings. The analogue resolution of 0.01 mm provides a clear balance between usability and precision, while the micrometer’s large-range capacity reduces the number of separate instruments required on the bench. As an analogue device, it is straightforward to operate and requires minimal setup, making it a pragmatic choice where ruggedness and continuity of readings are priorities. Contact Metav Werkzeuge to discuss the Microtech Metrology outside micrometer for specific measuring tasks or to request a calibrated unit; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 110112501 GTIN: 4061905458767 Manufacturer: Microtech Metrology Facts Measuring range: 225–250 mm Resolution: 0.01 mm Accuracy: ±0.005 mm Display type: Analog Anvil diameter: Ø6.5 mm Special features Ratchet stop micrometer head Calibration certificate ISO 17025 (Ilac MRA) Analogue high-accuracy instrument FAQ What accuracy can be expected from this outside micrometer? The outside micrometer from Microtech Metrology offers an accuracy of ±0.005 mm, a level suited for precise workshop and inspection tasks. Is the micrometer supplied calibrated and traceable? Yes — the instrument is supplied with a calibration certificate issued under ISO 17025 (Ilac MRA), confirming traceability and laboratory calibration. Which measuring range does the micrometer cover and what is it best used for? The instrument covers the 225–250 mm range and is ideal for external measurements on shafts, bearing housings and similar large components. How does the ratchet stop help in everyday use? The ratchet stop on the micrometer spindle ensures a consistent measuring force for repeatable readings, reducing operator influence during repeated checks. Is the display digital or analogue and what resolution does it provide? This is an analogue instrument with a 0.01 mm graduation, offering clear, high-resolution readings for workshop inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
225-250mm Precision Micrometer, Digital Touchscreen Readout, ISO 17025 Calibrated Wireless/USB - Microtech Metrology
Combine traceable calibration, wireless data transfer and a high-resolution 2.4" touchscreen for reliable inspection results; ideal where quick documentation and repeatable readings are required. Order the Digital Micrometer (225–250 mm) directly via Metav Werkzeuge or ask our consultants if needed. Digital Micrometer 225–250 mm — Microtech Metrology, 2.4" colour touchscreen & Wireless/USB A Digital Micrometer 225–250 mm designed for precise external and thread measurement tasks in inspection benches and production control environments. Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibrated with certificate Non-rotating spindle for consistent readings Traceable precision for inspection and quality control The instrument delivers a measured accuracy of 0.008 mm, backed by an ISO 17025 calibration certificate for immediate entry into traceable inspection processes. With a fine resolution of 0.0001 mm, the device supports production control where small deviations must be detected and documented. This level of metrological certainty reduces rework and supports audit requirements by providing reproducible figures for pass/fail decisions. Faster documentation and fewer transcription errors Equipped with a 2.4" touchscreen and both Wireless and USB outputs, the device integrates into digital workflows without complex retrofits. Readings can be transmitted directly to inspection software or a statistical process control system, shortening the time between measurement and corrective action. The combination of a clear colour display and direct data export reduces manual entry and associated errors, improving throughput in high-mix inspection routines. Robust mechanics for repeatable external measurements Mechanical design focuses on repeatability: a non-rotating spindle ensures the measured face stays aligned while the thimble advances, limiting disturbance of delicate threads and profiles. The dimensional range of 225–250 mm suits medium to large components, providing a stable gauge length that balances reach and rigidity. The instrument’s construction supports routine shop-floor handling while maintaining metrological integrity across repeated cycles. Accessories and immediate workshop readiness Delivered with 6x anvils 0.4–7 mm (Metric 60), the instrument adapts to a variety of thread and profile diameters without delay. The supplied accessories and the included ISO 17025 calibration certificate make the gauge ready for deployment in incoming inspection, final inspection or laboratory tasks. Where traceability and documented conformity are required, these bundled elements save time and administrative effort. For traceable, workshop-ready precision choose Microtech Metrology’s digital micrometer and contact Metav Werkzeuge in Emmerich for tailored delivery and technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 110712508 GTIN: 4061905457050 Manufacturer: Microtech Metrology SKU: 110712508 Facts Measuring range: 225–250 mm Accuracy: 0.008 mm Resolution (display): 0.0001 mm Display size: 2.4" colour touchscreen Data output: Wireless, USB Special features Digital instrument ISO 17025 calibration certificate included Non-rotating spindle Included: 6x anvils 0.4–7 mm (Metric 60) Type: Metric 60 FAQ What level of calibration is supplied with the micrometer? The Digital Micrometer is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceable documentation. How are readings transferred to an inspection system? Readings can be exported wirelessly or via USB from the micrometer; the colour touchscreen also displays results for manual verification. What measurement range and accuracy does this instrument offer? The gauge covers a 225–250 mm range with an accuracy of 0.008 mm and a display resolution of 0.0001 mm. Are accessories included for different thread sizes? Yes — the delivery contains 6x anvils (0.4–7 mm, Metric 60), allowing adaptation to common thread and small-profile external measurements. Is the spindle suitable for delicate thread measurements? The instrument features a non-rotating spindle, which helps maintain alignment and reduces disturbance when measuring delicate threads and profiles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
225–250 mm Digital Micrometer 0.001 mm Resolution, Ratchet, Hardened Measuring Faces, Supplied In Case - Metav IndustryLine
Take advantage of precise, repeatable measurement with a 0.001 mm resolution and a ratchet spindle that ensures consistent measuring force; the robust construction and matt‑chrome thimble support reliable workshop use. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital micrometer M302.263 (225–250 mm) — 0.001 mm resolution, ratchet stop by Metav IndustryLine A Digital micrometer M302.263 designed for accurate outside measurements across the standard workshop range, ideal for quality control and production checks. 0.001 mm digital resolution Measuring range 225–250 mm Ratchet spindle for consistent force Hardened 6.5 mm measuring faces Precision engineered for repeatable results The micrometer delivers a 0.001 mm display resolution, providing fine gradation where sub‑millimetre differences matter. The combination of a ratchet spindle and hardened measuring faces reduces operator‑induced error by standardising closing force and resisting wear; this results in repeatable readings over long production runs. The instrument meets DIN 863 guidance, making it a dependable tool for routine inspection tasks and assembly checks where reproducibility is essential. Built for robust workshop handling and long service life Constructed with a painted frame and a matt‑chrome‑plated thimble, the design resists corrosion and keeps tactile surfaces easy to read and operate. Its measuring range (225–250 mm) places the instrument in the standard size class, which offers a practical compromise between reach and stiffness for general machine‑shop applications. With a weight of 2.1 kg, the device feels substantial and stable during measurement, aiding steadiness on larger parts without sacrificing manual control. Digital features that speed up routine measurement The clear digital display includes ON/OFF/SET and ABS/INC/UNIT functions to toggle measurement modes and units quickly, reducing the need for mental conversion and manual note taking. The readable numeric output simplifies logging of results and shortens cycle time for quality routines. The robust electronic readout, paired with mechanical measures such as the ratchet, provides an efficient mix of speed and traditional micrometer control that benefits production environments and inspection benches alike. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — Metav Werkzeuge will help match the micrometer M302.263 to the application. Technical Data Article number: M302.263 SKU: M302.263 GTIN: 4054469151816 Category: Micrometers (measuring instruments) Facts Measuring range: 225–250 mm Resolution: 0.001 mm Measuring faces diameter: 6.5 mm Weight: 2.1 kg Standard: DIN 863 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT Ratchet stop for uniform measuring force Frame painted Thimble matt‑chrome‑plated Hardened measuring faces FAQ What level of resolution and repeatability does this micrometer offer? The Digital micrometer M302.263 provides a resolution of 0.001 mm; the ratchet spindle and hardened faces together support highly repeatable readings suitable for workshop quality control. Is this instrument suitable for general machine‑shop use? Yes — the 225–250 mm range classifies it as a standard workshop micrometer, making the M302.263 appropriate for routine checks on components, fixtures and assemblies. How does the ratchet spindle improve measurement quality? The ratchet on the spindle enforces a consistent final measuring force, reducing variability from operator pressure; this ensures the Digital micrometer M302.263 yields uniform readings across multiple users. Which display functions are available and what do they do? The digital readout includes ON/OFF/SET and ABS/INC/UNIT, enabling quick switching between absolute and incremental modes and between measurement units to streamline logging and comparative checks. What materials and finish contribute to durability? The frame is painted and the thimble is matt‑chrome‑plated; together with hardened measuring faces, these finishes extend service life and maintain measuring integrity under workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24-18 TPI Thread Insert 55° Whitworth Profile - Metav IndustryLine
Take advantage of precise compatibility with Whitworth thread standards and the compact, lightweight design to streamline gauge preparation and reduce inspection downtime; order the matching inserts directly via Metav Werkzeuge or consult our specialists for application advice. Thread gauge inserts M309.098.4 — 24–18 TPI, 55° flank The thread gauge inserts M309.098.4 are designed as precision accessory parts for setting and verifying Whitworth 55° thread gauges in workshop and inspection workflows. For Whitworth 55° threads 24–18 TPI Precision-ground 55° flank angle Lightweight 0.1 kg for easy handling Compatible with standard thread gauges Accurate alignment for Whitworth thread inspection The inserts are manufactured for the Whitworth 55° profile and the TPI range 24–18 TPI, ensuring correct flank geometry during gauge setup. Using a purpose-made insert for this profile reduces interpretation errors that occur when adapting general-purpose tools; the defined flank angle preserves thread form when comparing gauges to master standards. This targeted specification supports repeatable measurement conditions in both routine checks and batch inspections, helping to avoid false rejects and limiting rework. Rapid integration into inspection routines The compact construction and 0.1 kg mass enable quick handling and swift exchange between gauges, which shortens setup time on the measuring bench. As an accessory part made for standard thread gauges, the component improves workflow efficiency by reducing tool-change friction and clarifying compatibility at the point of inspection. The clearly defined compatibility with Whitworth 55° threads allows maintenance and quality teams to standardise spare parts, simplifying logistics and saving time during audit preparation. Traceability and workshop resilience Supplied as a dedicated accessory for thread measurement, the insert is identifiable by its SKU and GTIN for inventory control and traceability; this supports documented quality processes and procurement transparency. Sourcing through an established partner like Metav Werkzeuge provides access to consistent stock and documented part data, which strengthens continuity for production and inspection departments. The robust specification focused on the 55° flank and the TPI range reduces uncertainty when replacing worn or lost inserts and contributes to a steady inspection throughput. Contact Metav Werkzeuge for tailored advice on integrating these inserts into existing Whitworth gauge sets or to confirm compatibility with specific inspection equipment in your workshop Technical data Article number: M309.098.4 GTIN: 4054469118352 Tariff number: 90173000 Weight: 0.1 kg Numerical data Thread form: Whitworth 55° TPI range: 24–18 TPI Flank angle: 55° Mass: 0.1 kg Special features Accessory for Whitworth 55° thread gauges Precision-ground flank geometry Intended for gauge setting and verification SKU referenced for traceability FAQ What thread profiles are supported by these inserts? The inserts are manufactured for the Whitworth 55° profile and cover the 24–18 TPI range, optimised for correct flank geometry during gauge setting. Can these inserts be used with any thread gauge brand? Yes; the inserts are designed as accessory parts compatible with standard thread gauges that accept Whitworth 55° profile components, and are stocked with SKU M309.098.4 for clear identification. How does the lightweight design benefit workshop use? At 0.1 kg, the inserts are easy to handle and swap, which reduces setup time and helps maintain steady inspection throughput on the measuring bench. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2400-2600 mm Digital Micrometer Caliper With IP65 Protection, ISO 17025 Calibration Certificate Included - Microtech Metrology
Take advantage of the combination of a very large measuring range, robust IP65 protection and an included ISO 17025 calibration certificate to ensure reproducible results on large external components; order directly via Metav Werkzeuge or consult the team for application advice. Microtech Metrology digital outside micrometer 2400–2600 mm (IP65, ISO 17025) A Microtech Metrology digital outside micrometer designed for precise external measurements of large components in heavy machining and pipework. ISO 17025 calibration certificate included IP65 protection class for harsh environments Large measuring range 2400–2600 mm Digital display with 0.001 mm resolution Friction ratchet for repeatable measuring force Precision and traceability for critical large‑format measurements This instrument is delivered fully calibrated to ISO 17025 and includes a printed calibration certificate, which secures traceability for quality systems and audit trails. The digital readout provides a resolution of 0.001 mm, while the stated accuracy of ±0.05 mm reflects the device’s capability for coarse yet reliable measurements over long spans. For workshops that must document conformity or integrate inspection results into quality records, the combination of high resolution and an accredited calibration certificate reduces uncertainty and simplifies acceptance checks. Built to withstand machining environments and ensure repeatable readings Protection to IP65 means the measuring head is dust‑tight and protected against low‑pressure water jets, so the device tolerates typical shopside contamination and light coolant exposure. The friction ratchet enforces a consistent measuring force, lowering variability caused by operator pressure and improving repeatability on large diameters. The measuring faces, with a contact area of Ø50 mm, distribute contact pressure and resist local deformation on rougher or contoured surfaces; this supports more stable readings on components such as thick‑walled tubes or large housings. Designed for large components with practical handling features A measuring range of 2400–2600 mm places this instrument in the Extra‑Long category for large external measures, making it suitable for pipes, shafts and sizeable gear blanks where conventional bench micrometers cannot reach. Despite the instrument’s mass (approx. 28.5 kg), the construction focuses on balanced support and handling aids so that two‑person measurement or temporary stands are practical. A set of setting rods is supplied for zero checks and quick verification, enabling fast on‑site acceptance tests and reducing downtime in production control. Workflow advantages and integration into inspection routines The digital head simplifies reading and logging: measurements can be read quickly to 0.001 mm and recorded without interpolation, accelerating inspection cycles for large batches. Delivered ready for use with the ISO 17025 certificate and the included adjustment tools, the micrometer shortens setup time and makes it straightforward to integrate into quality routines. The rugged design and IP65 rating support use at machine stations rather than only in a clean measuring room, which helps maintain throughput while keeping measurement integrity. Contact Metav Werkzeuge for an application review and to secure this Microtech Metrology digital outside micrometer with ISO 17025 calibration and full documentation Technical data Article number: 110172601 GTIN: 4061905039454 Category: Micrometers Facts Measuring range: 2400–2600 mm Maximum measuring range: 2600 mm Minimum measuring range: 2400 mm Resolution (display): 0.001 mm Accuracy: ±0.05 mm Measuring faces: Ø50 mm Weight: 28.5 kg Protection class: IP65 Special features Digital readout, IP65‑rated measuring head Friction ratchet for repeatable measuring force Setting rods included for adjustment Calibration certificate included (ISO 17025, Ilac MRA) Manufacturer: Microtech Metrology FAQ What measuring range does this instrument cover? The measuring range is 2400–2600 mm, specified for large external measurements such as long shafts or pipes. How precise is the micrometer for inspection work? The digital head provides a resolution of 0.001 mm and the device’s declared accuracy is ±0.05 mm, suitable for coarse precision across long spans. Is the micrometer supplied ready for use with traceable calibration? Yes; the micrometer is delivered with a full ISO 17025 calibration certificate, included with the instrument for documented traceability. Can the instrument be used at machine stations or in harsher environments? With an IP65 rating for the measuring head, the instrument resists dust ingress and low‑pressure water jets, allowing use outside a clean room under typical workshop conditions. How does the friction ratchet support measurement quality? The friction ratchet enforces a consistent measuring force, reducing operator‑dependent variation and improving repeatability on large contact diameters. Which SKU identifies this product for ordering and documentation? This item is listed under SKU 110172601 and supplied by Microtech Metrology with the accompanying calibration documents Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2400-2600mm Bore Gauge Micrometer With Colour Touchscreen, Wireless/USB, ISO17025 Calibration - Microtech Metrology
Take advantage of an ISO 17025‑calibrated instrument with an extra‑long 2,400–2,600 mm range and wireless data transfer to keep large‑component measurement reliable and traceable. Choose a robust CNC‑machined aluminium design with Ø50 mm measuring faces and integrated memory to streamline inspection routines; order the device directly via Metav Werkzeuge or ask our consultants for application advice. Outside Micrometer — 2,400–2,600 mm digital micrometer with wireless + USB (Microtech Metrology) The Outside Micrometer is a heavy‑duty measuring instrument with an integrated microcomputer and colour touchscreen, designed for large‑format metrology in machine shops, mould making and heavy machining environments 2,400–2,600 mm measuring range ISO 17025 calibration certificate included Wireless and USB data output CNC‑machined aluminium housing Colour 1.5" touchscreen display Measure long components with repeatable stiffness and reach The micrometer’s 2,400–2,600 mm measuring range classifies it among extra‑long instruments intended for big assemblies such as large shafts, housings and pipe sections. The long frame is engineered for sufficient profile stiffness, which reduces sagging and improves repeatability across extended spans; this lowers rework rates when compared with improvised measuring setups. Suitable handling and transport procedures are recommended given the instrument’s mass and size. Traceable digital results and straightforward data flow Equipped with a colour 1.5" touchscreen and a comprehensive memory manager, the instrument stores up to 2000 values in organised folders and provides statistical summaries for batch inspections. The electronic readout offers fine resolution (0.0001) and a defined accuracy level, while the supplied calibration certificate confirms the device has been calibrated to ISO 17025 (Ilac MRA) standards. Built‑in wireless and USB transfer modes simplify integration into inspection workflows and reduce transcription errors during data capture. Workshop‑ready construction and integration options The solid, CNC‑machined aluminium housing protects sensitive electronics while keeping thermal and mechanical stability high in industrial use. The measuring faces have a Ø50 mm contact surface for robust seating on large parts, and optional industrial interfaces — including Modbus RTU (RS‑485) — allow connection to PLCs or factory networks for automated logging. Wireless MICROTECH hub functions and HID/USB modes support both mobile apps and PC software, enabling fast incorporation into existing quality systems. Contact Metav Werkzeuge to discuss delivery, calibration status and integration options for this Microtech Metrology outside micrometer; Metav Werkzeuge can advise on compatibility with existing inspection systems and arrange supply from Emmerich. Technical data Article number: 110182608 GTIN: 4061905039935 Manufacturer: Microtech Metrology Category: Micrometers Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Weight: 28.5 kg Core specifications Measuring range: 2,400–2,600 mm Measuring faces: Ø50 mm Resolution: 0.0001 Accuracy: 0.04 mm Memory capacity: 2000 values Special features CNC‑machined aluminium housing Wireless MICROTECH instrument connection Multiple data transfer modes (Wireless HID, USB HID) Optional Modbus RTU (RS‑485) for industrial integration Integrated microcomputer and on‑screen statistics FAQ What measuring range does this instrument cover? The instrument covers a 2,400–2,600 mm measuring range, suitable for large shafts and housings. Is the device delivered with a calibration certificate? Yes, the micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA). How are measurement results transferred to a PC or database? Results can be sent via wireless modes or USB HID and an optional Modbus RTU (RS‑485) interface is available for industrial networks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25 mm Dial Thickness Gauge Ø30 mm Anvil, Painted Frame, Matt Chrome Thimble, Ratchet, Case - Metav IndustryLine
Taking advantage of a robust painted frame, a Ø30 mm disc anvil and a ratchet stop, this micrometre delivers stable contact and reproducible measuring force for small components; order it directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. M309.350 Disc Anvil Micrometre – 0–25 mm, Ø30 mm disc, ratchet stop (Metav IndustryLine) The M309.350 Disc Anvil Micrometre is a precision mechanical micrometre for accurate external measurements on small parts in workshop and inspection environments. 0–25 mm measuring range Ø30 mm disc anvil for stable contact Ratchet stop for reproducible measuring force Matt‑chrome measuring drum, painted frame Consistent precision for small‑part inspection The instrument is built to provide repeatable results when measuring small components. With a measuring span of 0–25 mm, the device sits in the Micro class, offering the ideal balance between compactness and rigidity for fine mechanical work. The specified measurement accuracy of ±0.004 mm and a display resolution of 0.01 mm ensure that dimensional decisions are based on reliable data; the ratchet stop prevents over‑tightening and keeps the applied measuring force consistent, which reduces operator‑induced variation. The Ø30 mm disc anvil increases the contact area for uneven or slightly curved surfaces, improving stability compared with a point anvil. Rugged design for routine shop use Durability and ease of handling reduce downtime in production and inspection cycles. A painted frame resists wear on the workshop floor while the matt‑chrome measuring drum gives a glare‑free reading surface. The non‑rotating spindle limits marking on delicate workpieces and helps to preserve surface integrity. At approximately 0.5 kg the gauge remains comfortable for hand inspection yet substantial enough to feel stable during operation. As an analog micrometre it provides a straightforward mechanical reading that requires no batteries, simplifying long‑term use and storage. Practical applications and measurement benefits Engineered for external diameter and thickness checks, the micrometre is particularly suited to precision fits, small housings and components where stable contact and repeatability matter most. The wider disc anvil makes it effective for measuring flanges, shallow grooves and parts with limited seating area. Classified in the Micro range, this gauge is appropriate for watchmaking, small‑part assembly, jig and fixture checks, and first‑article inspections where compact footprint and fine resolution are essential. The construction choices—disc anvil, ratchet stop and matt‑chrome drum—translate directly into fewer remeasures and faster inspection throughput. Supply and assurance from a specialised partner Sourcing through Metav IndustryLine adds logistical and technical reassurance: centralised stock management in Emmerich supports reliable delivery and access to a broad range of precision tools. Metav’s position as a precision partner means the instrument is offered alongside application advice and spare parts information, helping to integrate the gauge into existing quality‑control routines without unnecessary complexity. The combination of practical workshop durability and consistent measuring force supports both production reliability and quality documentation. Contact Metav Werkzeuge for application guidance on the M309.350 disc anvil micrometre or to discuss suitable inspection workflows—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.350 GTIN: 4054469118772 Manufacturer: Metav IndustryLine Category: Micrometres (micrometre screw gauges) Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: ±0.004 mm Anvil diameter: Ø30 mm Weight: 0.5 kg Special features Painted frame Matt‑chrome measuring drum Ratchet stop for reproducible force Non‑rotating spindle Analog operation Customs tariff number: 90173000 FAQ Is the micrometre suitable for curved or irregular surfaces? The Ø30 mm disc anvil of the M309.350 disc anvil micrometre improves seating on slightly curved or irregular surfaces, giving a more stable contact area than a narrow anvil. What level of repeatability can be expected with this instrument? Repeatability is supported by the ratchet stop and non‑rotating spindle; typical measurement reproducibility aligns with the stated accuracy of ±0.004 mm when used under consistent handling. Can the micrometre be used for delicate or finished surfaces? Yes. The non‑rotating spindle and disc anvil help to reduce marking, making the M309.350 suitable for finished or delicate components where surface preservation is required. Is this gauge battery‑free and suitable for shop environments? The device is an analog micrometre and requires no batteries, which simplifies long‑term use in workshop conditions and reduces supply dependencies. Which workshop tasks is this instrument optimised for? Optimised tasks include small‑part diameter checks, flange thickness measurement and precision assembly inspection—applications where compact size and stable contact are priorities. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 mm Digital Bore Gauge With Ratchet, Matt Chrome Measuring Spindle, Supplied In Case - Metav IndustryLine
Benefit from 0.001 mm resolution and a ratchet stop that together deliver repeatable contact pressure and dependable measurement results for fine mechanical work; order this micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital Micrometer M302.154.C — 0–25 mm, 0.001 mm resolution, ratchet stop (Metav IndustryLine) A Digital Micrometer M302.154.C designed for precise external measurements in inspection and workshop environments, combining a matt‑chromed measuring drum with a painted frame for clear readings and robust handling. 0.001 mm resolution for fine measurement Ratchet stop for reproducible contact Matt‑chromed measuring drum for clear reading Data output RB 4.1 for traceable results Reliable precision for micro‑workshops and inspection benches This micrometer is built for micro measurement tasks with a measuring range of 0–25 mm, making it well suited to fine mechanical and watchmaking work where compactness and stiffness matter. The device offers a resolution of 0.001 mm and an indicated accuracy of 0.004 mm, which together enable detailed control of tolerances. The spindle pitch of 0.5 mm and the ratchet stop minimise operator influence on contact force, ensuring that single‑operator measurements remain reproducible across repeated checks. Ergonomic handling and straightforward digital readout The tool combines a tactile, painted frame with a matt‑chromed measuring drum and a clear digital display equipped with ON/OFF, ABS/INC, UNIT and SET functions, enabling fast switching between absolute and incremental modes and between metric and imperial units. The integrated ratchet ensures consistent end‑positioning, while the drum finish reduces glare for easier reading. These features reduce cycle time at the bench and support efficient quality control routines without sacrificing accuracy. Built‑in data export and practical measuring geometry For traceability and integration into inspection workflows the micrometer provides a data output (RB 4.1) suitable for connection to a data logger or measuring software, simplifying documentation of measurements. The instrument includes spherical and flat measuring faces, allowing reliable contact on curved and flat workpieces, and a spindle diameter of 6.5 mm that contributes to mechanical stiffness. Together these characteristics support reproducible external measurements and make the gauge a dependable choice for small‑part production and laboratory checks. Contact Metav Werkzeuge for application guidance and secure this Metav IndustryLine digital micrometer for your inspection bench. Technical data Article number: M302.154.C GTIN: 4054469115047 Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.001 mm (0.0005 in) Accuracy: 0.004 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Data output: RB 4.1 Special features Frame: painted Measuring drum: matt‑chromed Measuring faces: spherical + flat Ratchet stop: yes Digital display functions: ON/OFF, ABS/INC, UNIT, SET Category: Micrometer screw gauges FAQ What is the smallest increment measurable with this micrometer? The micrometer provides a resolution of 0.001 mm, equivalent to 0.0005 inches, allowing fine discrimination for small‑part inspection. Is the micrometer suitable for curved surfaces? Yes — the device features spherical measuring faces in addition to flat faces, so it can register accurate external measurements on both curved and flat components. Can measurement data be exported electronically? Measurement values can be transferred via the RB 4.1 data output, enabling direct logging from the digital micrometer for traceability and SPC workflows. Does the tool limit operator influence on readings? A built‑in ratchet stop controls contact force and, together with the 0.5 mm spindle pitch, helps produce consistent, repeatable readings during routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 mm Digital Micrometer Friction Ratchet 0.001 mm Resolution Data Output RB 6, DIN 863 - Metav IndustryLine
Take advantage of high-resolution measuring, the friction ratchet for repeatable contact force and digital data output for process integration; order the digital micrometer directly via Metav Werkzeuge or ask the consultants for specification support. Digital micrometer 0–25 mm — precise 0.001 mm resolution with friction ratchet (Metav IndustryLine) Digital micrometer 0–25 mm for laboratory and workshop use, combining fine resolution, a repeatable measuring tip and a compact, robust design for reliable dimensional control. High-resolution 0.001 mm reading Integrated friction ratchet for repeatability RB 6 data output for digital transfer Conforms to DIN 863 standard Accuracy where tight tolerances matter The 0–25 mm measuring range paired with a 0.001 mm display step gives a clear advantage in fine mechanical work and component inspection. The micrometre's electronics and digital display deliver precise readback while the mechanical friction ratchet ensures consistent measuring force, reducing operator-related scatter. Compliance with DIN 863 provides an established normative basis for industrial use and eases incorporation into quality control routines. Smooth data handling for modern workflows Equipped with a RB 6 data output and simple control keys (ON/OFF/SET, DATA, mm/inch, zero), the instrument supports digital documentation and downstream evaluation. The transmittable readings allow rapid entry into measurement logs or SPC tools, shortening measurement cycles and lowering transcription errors. The compact interface and clear controls mean the instrument integrates into existing test benches without lengthy setup or specialised adapters. Designed for everyday use and durability A measurement face diameter of 6.5 mm and a balanced construction keep the device stable during contact measurements; the instrument's modest mass (0.5 kg) and compact dimensions make it comfortable to handle yet robust enough for routine shop-floor use. Supplied in a protective case, the unit is ready for transport and safe storage between shifts. Built to support repetitive inspection tasks, it suits both lab and workshop environments where dependable, repeatable results are required. For practical advice on deploying Metav IndustryLine measuring tools in production, contact Metav Werkzeuge in Emmerich for tailored guidance and reliable delivery Technical Data Article number: M302.074 GTIN: 4054469168791 Category: Micrometers / Micrometer screw gauges Weight: 0.5 kg Facts Measuring range: 0–25 mm Resolution: 0.001 mm Measurement face diameter: 6.5 mm Standard: DIN 863 Special features Digital display with ON/OFF/SET, DATA and mm/inch/0 buttons Friction ratchet for consistent measuring force Data output: RB 6 Supplied in protective case FAQ Is the micrometer suitable for workshop use? Yes. The digital micrometer from Metav IndustryLine is designed for workshop and laboratory use, offering robust construction and a usable measuring range of 0–25 mm. What level of accuracy can be expected? The instrument provides a resolution of 0.001 mm and meets DIN 863, ensuring suitability for fine measurement tasks and quality control. Can measurement data be exported directly? The device features an RB 6 data output for transferring readings; the RB 6 interface is provided for integration into digital measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 mm Digital Micrometer With 7 Pairs Of Inserts, 0.001 mm Resolution, Sliding Anvil, Supplied In Case - Metav IndustryLine
Take advantage of high-resolution measurement, a ratchet for consistent contact pressure and a movable anvil that adapts to stepped parts for reliable workshop control; order the digital universal micrometer directly via Metav Werkzeuge or consult the Metav team for application advice. Digital universal micrometer M302.140.D — 0–25 mm, 0.001 mm resolution (Metav IndustryLine) Digital universal micrometer M302.140.D for precise external measurements in fine mechanical and workshop environments, equipped with a movable anvil and high-resolution digital readout. Digital readout 0.001 mm resolution Includes 7 pairs of measuring inserts Ratchet for consistent measuring force Matt-chrome measuring drum finish Exceptional resolution for demanding tasks The instrument delivers a resolution of 0.001 mm, making it suitable where sub-micron insight is required for quality checks and finish verification. The fine numerical step on the display removes ambiguity in tolerance work and supports traceable decisions during setup and inspection. The rotating measuring spindle and precise mechanics convert operator motion into repeatable results, reducing the need for subsequent rework. Repeatability and handling that support production control A built-in ratchet guarantees a consistent measuring force, which reduces operator-induced variation and improves reproducibility across batches. The movable anvil extends the usability to stepped and irregular components without additional gauging, while the supplied 7 pairs of measuring inserts offer adaptability to different part geometries. These characteristics combine to speed up inspection routines and make this micrometer a reliable tool for routine quality control. Data capture and workshop compatibility for modern workflows The digital display is organised with ON/OFF, ABS/INC, UNIT and SET buttons for quick mode changes, and the device provides a data output RB 4.1 for connection to counters or data-collection equipment that supports the RB 4.1 interface. This enables straightforward transfer of measurement values into SPC or logging systems, supporting production documentation and process monitoring. The matt-chrome finish on the measuring drum reduces glare for easier reading under workshop lighting. Choose the Metav IndustryLine micrometer for dependable fine measurement and contact Metav Werkzeuge for tailored advice and fast European supply Technical data Article number: M302.140.D GTIN: 4054469114781 Category: Micrometers Facts Measuring range: 0–25 mm Resolution: 0.001 mm Measuring spindle diameter: 6.5 mm Weight: 0.7 kg Number of measuring inserts: 7 pairs Data output: RB 4.1 Special features Matt-chrome measuring drum Movable anvil for stepped measurements Ratchet stop for uniform measuring force Digital display with ON/OFF, ABS/INC, UNIT and SET Rotating measuring spindle Delivered to factory standard (Werksnorm) FAQ What accuracy can be expected from this micrometer? The micrometer M302.140.D provides a resolution of 0.001 mm; combined with its ratchet and precision spindle this yields high repeatability suitable for standard workshop and fine‑mechanical inspections. Can the micrometer connect to data-collection systems? Yes. The device offers a data output RB 4.1, allowing values from the M302.140.D to be sent to compatible counters or SPC systems for logging and analysis. What is included with the micrometer for different part shapes? The scope of delivery comprises 7 pairs of measuring inserts, enabling adaptation to a variety of outer‑dimension profiles without improvised fixtures. Is the measuring force standardised to reduce operator variance? A ratchet stop provides a repeatable contact force; this feature on the M302.140.D helps to minimise measurement deviations caused by inconsistent hand pressure. How is the device supplied with regard to calibration and standards? The instrument is produced and delivered to factory standard (Werksnorm); any calibration or certificates beyond that are handled according to the seller’s calibration options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25 mm Micrometer With Ratchet Thimble, Matt Chrome Plated Thimble, In Case, DIN 863 - Metav IndustryLine
Take advantage of precise, repeatable readings and a robust matt‑chrome thimble for consistent workshop results; benefit from a reliable analogue instrument that combines simple maintenance and DIN conformity. Order the M304.228 directly via Metav Werkzeuge or consult the technical team for specification advice. M304.228 outside micrometer — analogue, friction ratchet, 0–25 mm The M304.228 is an analogue outside micrometer designed for precise workshop and inspection measuring tasks, equipped with a friction ratchet and a matt‑chromed measuring thimble for consistent handling and clear reading. Analogue outside micrometer 0–25 mm Friction ratchet for repeatable measuring force Matt‑chromed thimble for clear, durable scale Conforms to DIN 863 Consistent measuring force for repeatable results The combination of an integrated friction ratchet and a fine 0.01 mm reading resolution reduces variability caused by operator pressure and delivers repeatable measurements in routine use. The instrument’s spindle has a 0.5 mm pitch, which defines the mechanical relationship between thumb rotation and axial travel; this ensures predictable movement per turn and aids quick coarse and fine adjustments. For workshops that rely on consistent gauging rather than electronic data logging, this analogue concept provides dependable tactile feedback and simple verification. Robust design and shop‑floor compatibility Crafted with a matt‑chromed thimble, the instrument resists glare while maintaining a legible scale under typical workshop lighting. A 6.5 mm spindle diameter contributes to axial stiffness and reduces deflection during contact measurement, supporting stable readings across the full measuring range. Compliance with DIN 863 places the device within recognised mechanical micrometer standards, which simplifies integration into existing inspection procedures and documentation. The analogue construction also minimises service needs compared with electronic systems. Practical application and operational benefits Built for everyday mechanical and toolmaking tasks, this outside micrometer suits maintenance, quality control and production measurement where a straightforward, reliable micrometric gauge is required. The friction ratchet's regulated torque prevents over‑closing and protects delicate parts while enabling rapid repetitive checks. The instrument is supplied with a practical cassette for secure storage and transport. For purchasers seeking pragmatic precision without complex electronics, this solution balances usability, durability and workshop compatibility. Contact Metav Werkzeuge for a tailored quotation or technical specification for the M304.228 outside micrometer, supported by local stock and application advice Technical data Article number: M304.228 GTIN: 4054469116457 Category: Micrometer Facts Measuring range: 0–25 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Standard: DIN 863 Tariff number: 90173000 Materials & features Thimble: matt‑chrome plated Friction ratchet Analogue instrument Includes cassette ECLASS: 21170328 ETIM: EC003590 FAQ What measuring range does this instrument cover? The M304.228 outside micrometer covers a measuring range of 0–25 mm, suitable for common workshop and inspection tasks. What resolution and mechanical features ensure repeatable readings? The micrometer offers a 0.01 mm resolution and a 0.5 mm spindle pitch; the integrated friction ratchet helps apply a consistent measuring force for repeatability. Is the micrometer supplied with any protective packaging? Yes, the M304.228 is supplied with a cassette for secure storage and transport, keeping the instrument protected between uses. Can the friction ratchet be used for delicate parts? The friction ratchet on this analogue micrometer limits closing torque, making the instrument suitable for sensitive surfaces and repetitive checks without overstressing the part. Which environments and tasks are suitable for this micrometer? The instrument is intended for mechanical workshops, toolmaking, maintenance and routine quality control where robust, tactile measuring instruments are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Measure external diameters to micrometre precision
Outside micrometers (also known as micrometer screw gauges) are the reference tool when dimensional tolerances leave no room for compromise. With measurement accuracy down to 0.001 mm, these instruments determine outside diameters, material thicknesses and shaft sizes with repeatable results, whether at the machine, on the shop floor or in a controlled metrology room.
How these micrometers deliver reliable readings in practice
Technically, an outside micrometer uses a finely threaded spindle and a fixed anvil; the spindle advance is controlled by a thimble and a ratchet stop, which together ensure a consistent measuring force. The robust frame resists bending during use, while a spindle lock fixes the measured value for reading. Variants range from classic analogue models with vernier or nonius scales to digital versions with IP protection against coolants and an integrated data interface for wireless transfer of quality data. Options include models with tungsten carbide measuring faces, interchangeable spindles and specialised sizes for hard-to-fix components.
Practical advantages that save time and reduce scrap
- Consistent, repeatable measurements thanks to the ratchet stop and rigid frame.
- High resolution of 0.001 mm for micrometre-level quality control.
- One-handed operation via the frame allows simultaneous handling of awkward or small parts (one-handed operation).
- Quick data capture and traceability with digital models featuring a data interface.
- Durable measuring faces and spindle lock for long-term stability (tungsten carbide measuring faces).
Why Metav is the practical choice for your workshop
Metav combines decades of precision expertise with a comprehensive range for industry and trade. From analogue micrometers to advanced digital versions, the Metav assortment acts as a quality filter for the European market, supplying reliable instruments from stock in Emmerich. With a broad catalogue and proven service, Metav reduces supplier complexity while ensuring parts arrive ready for immediate use.
In short: precise, repeatable and ready for industry
Outside micrometers deliver micrometre-level accuracy for external measurements, offering durable construction, ergonomic one-handed handling and modern digital options for straightforward data capture. Metav’s selection covers the spectrum from workshop checks to final inspection.
FAQ
What accuracy can I expect from outside micrometers?
Outside micrometers in this category provide measurement resolution and repeatability down to 0.001 mm, making them suitable for high-precision tasks in toolmaking, automotive and quality assurance.
When should I choose a digital micrometer over an analogue one?
Choose a digital micrometer if you require fast data logging and traceability; digital models in the Metav assortment often include IP protection against coolants and a data interface for wireless quality-data transfer.
Are there micrometers suitable for soft or delicate surfaces?
Yes. Models with specialised anvils and adjustable measuring faces—some fitted with tungsten carbide measuring faces or interchangeable spindles—allow measurement of delicate surfaces while maintaining accuracy.
Can outside micrometers be operated with one hand on the shop floor?
Many outside micrometers are designed for one-handed operation, using the frame and thumb control on the thimble so the other hand can stabilise the workpiece during measurement.
How does the ratchet stop improve measurement consistency?
The ratchet stop ensures a uniform measuring force for each reading; combined with the rigid frame and spindle lock, this produces highly reproducible results across different operators.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com