Precision built-in calipers for accurate linear positioning
Built-in calipers provide permanent, high-precision measurement of travel and position along linear axes, enabling direct conversion of mechanical motion into reliable digital values that boost productivity and reduce scrap. Designed for robust use in machine tools, fixtures and special machines, these systems allow horizontal or vertical mounting and resist dust, oil and splash water while offering flexible display placement via a separate LCD unit. With features such as zero setting at any position, inch-metric switching and modern data interfaces, these built-in calipers, digital linear measuring systems and linear encoder strips deliver dependable position control for industrial metalworking.
2000mm Digital Precision Caliper With 10x Magnifier, IP67 - Microtech Metrology
Take advantage of the combination of a truly embedded design, robust IP67 protection and an extra‑long 0–2000 mm measuring range for reliable large‑format inspections; the solid Swiss Electronics readout and fine 0.001 mm resolution maintain traceable results while keeping cycle times short. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Embedded digital caliper — built‑in caliper with IP67 protection and Swiss Electronics display (Microtech Metrology) A built‑in digital caliper designed for extra‑long measurements up to 0–2000 mm, combining an industrial Swiss Electronics display, robust sealing and a magnifying lens for clear reading in production environments. Embedded housing for flush installation IP67 protection for harsh environments Swiss Electronics digital display, high resolution Measurement range up to 2,000 mm Precision over long distances for large assemblies The embedded digital caliper is classified in the Extra‑Long category, making it suitable for measurements of sizeable components such as large shafts, housings and welded assemblies. The design preserves longitudinal stiffness over 2 m of travel so that readings remain reproducible even when measuring extended lengths. The sealed construction with IP67 rating protects electronics and guides from coolant and dust, reducing downtime and maintenance interventions while ensuring consistent measurement quality on the shop floor. Clear, high‑resolution digital readout to speed decisions Equipped with a Swiss Electronics display, the instrument delivers a fine 0.001 mm display step combined with an overall accuracy of ±0.05 mm, which balances high resolution with robust industrial tolerance. This configuration enables quicker decision loops in quality control: the high‑contrast readout and integrated 10x magnification simplify visual checks, while the small display increment allows detection of minute deviations during setup and inspection. The result is more reliable process control and fewer rework loops. Robust integration and easy installation into production fixtures The flush‑mount format is designed for permanent installation in fixtures, gauging stations or machine beds where space is limited but repeatability is essential. The embedded layout reduces snagging and protects the scale from mechanical impact. Installation benefits from a compact interface and industrial‑grade sealing, so the unit remains serviceable in demanding environments. The sturdy construction supports long‑term use in transfer lines and assembly jigs, providing a dependable metrology reference for assembly and machining operations. For precision work on large components, request technical integration support from Metav Werkzeuge or order the Microtech Metrology embedded digital caliper via info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our Emmerich‑based team will advise on fixture compatibility and delivery from stock. Technical data Article number: 142520151 GTIN: 4061905457951 Brand: Microtech Metrology Digital display: Swiss Electronics Magnification: 10x Protection class: IP 67 Facts Measuring range: 0–2000 mm Display resolution: 0.001 mm Accuracy: ±0.05 mm Digital: yes SKU: 142520151 Special features Embedded / flush‑mount design Extra‑Long measurement class Robust sealing for dust and water High‑resolution Swiss Electronics readout Suitable for large‑format production measurement FAQ What measurement lengths does this caliper cover? The embedded digital caliper covers a measuring range of 0–2000 mm, suited to extra‑long inspection tasks and larger assemblies. What resolution and accuracy can be expected? The instrument provides a display resolution of 0.001 mm with an overall accuracy of ±0.05 mm, combining fine readout with industrial robustness. Is the caliper suitable for wet or dusty environments? Yes, the unit is rated IP67, which protects electronics and guides against dust ingress and temporary immersion, making it suitable for many workshop and production settings. Who manufactures the device and which model is it? The caliper is supplied by Microtech Metrology as an embedded digital caliper, SKU 142520151, and is designed for direct fixture integration. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Digitaler Einbaumessschieber, 0,01mm, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Nutzen Sie die Kombination aus IP 67 Schutz, großem Big Screen Swiss Electronics Display und dem 2.000 mm Messbereich für zuverlässige Langmessungen in Werkstatt und Formenbau. Die Ablesung von 0,01 mm bei einer angegebenen Genauigkeit von 0,08 mm sorgt für schnelle Prüfprozesse und weniger Nacharbeit. Beziehen Sie den Einbaumessschieber über Metav Werkzeuge oder fordern Sie bei Bedarf technische Beratung an. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber ist ein digitaler Messschieber zur präzisen Längenmessung über bis zu 2.000 mm, konzipiert für großformatige Bauteile und industrielle Prüfaufgaben. Robust IP 67 Schutz für raue Umgebungen Großer Digital-Bildschirm Big Screen Swiss Electronics Messbereich bis 2.000 mm für Langmessungen Ablesung 0,01 mm für schnelle Kontrolle Eindeutige Artikelnummer 142520147 für Bestellung Lange Reichweite für großformatige Messaufgaben Mit einem Messbereich bis 2.000 mm fällt der Schieber in die Kategorie Lang und ist damit für großformatige Komponenten wie Spannmittel, Gehäuse oder Formplatten geeignet. Die verlängerte Reichweite erlaubt Messungen über ganze Bauteile, ohne mehrere Teilmessungen zusammenfügen zu müssen, was direkte Zeitersparnis bei Prüfabläufen bringt. Anwender profitieren von einer bewussten Balance zwischen Reichweite und Handhabung, die lange Messstrecken reproduzierbar macht. Robuste Schutzart und verlässliche Elektronik Die Schutzklasse IP 67 schützt vor Staub und zeitweiligem Untertauchen, sodass das Messgerät in verschmutzten Fertigungsbereichen und bei Feuchtigkeit zuverlässig bleibt. Das Big Screen Swiss Electronics Display bietet eine klare Ablesbarkeit auch bei ungünstigen Lichtverhältnissen und reduziert Fehler beim Ablesen. Diese Kombination erhöht die Betriebssicherheit und minimiert Ausfallzeiten durch defekte Elektronik. Messgenauigkeit und Ablesbarkeit für effiziente Prüfprozesse Die Digitallösung liefert eine Ablesung von 0,01 mm, während die technische Genauigkeit bei 0,08 mm liegt; das ermöglicht schnelle Kontrollen mit ausreichender Reproduzierbarkeit für viele Werkstatt‑ und Produktionsanforderungen. Durch die elektronische Anzeige verkürzt sich die Messzeit gegenüber rein manuellen Ablesungen, was den Messworkflow beschleunigt und die Prüfkosten pro Bauteil senkt. Zielgruppenorientierte Anwendung und Einsatzfelder Der Schieber ist besonders geeignet für Vorrichtungsbau, Formenbau und Montageprozesse, in denen lange Messstrecken und robuste Geräte gefordert sind. Techniker und Qualitätsbeauftragte erhalten mit diesem Messgerät ein praxisgerechtes Instrument für die Serienprüfung und Einzelabnahme großer Bauteile. Die Kombination aus Schutzart, Reichweite und Display unterstützt standardisierte Prüfprozesse und erleichtert die Integration in bestehende Arbeitsabläufe. Empfehlung: Den robusten Microtech Einbaumessschieber für zuverlässige Langmessungen über Metav Werkzeuge beziehen; bei technischen Fragen stehen die Metav Techniker per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 142520147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459757 Daten Messbereich: 0–2000 mm Maximale Reichweite: 2000 mm Genauigkeit: 0,08 mm Ablesung: 0,01 mm Besonderheiten IP 67: Staub‑ und Wasserschutz Digitalanzeige: Big Screen Swiss Electronics ECLASS: 21170344 FAQ Für welche Anwendungen eignet sich der Einbaumessschieber am besten? Der Microtech Einbaumessschieber eignet sich für Langmessungen in Formenbau, Vorrichtungsbau und Montage, wenn Bauteile bis 2.000 mm kontrolliert werden müssen. Die Kombination aus Reichweite, IP 67 Schutz und digitaler Anzeige reduziert Messaufwand bei großen Komponenten. Welche Genauigkeit und Ablesbarkeit bietet das Messgerät? Der Einbaumessschieber von Microtech Metrology weist eine technische Genauigkeit von 0,08 mm auf und eine Ablesung von 0,01 mm, wodurch schnelle und reproduzierbare Prüfungen in Produktionsumgebungen möglich sind. Ist der Schieber für den Einsatz in feuchten oder staubigen Umgebungen geeignet? Ja, die Schutzklasse IP 67 des Microtech Einbaumessschiebers gewährleistet Schutz gegen Eindringen von Staub und gegen zeitweiliges Untertauchen, was den Einsatz in anspruchsvollen Werkstattbereichen ermöglicht. Wie erkennt man das passende Modell bei Bestellung? Nutzen Sie die Artikelnummer 142520147 in Verbindung mit dem Markennamen Microtech Metrology und der Bezeichnung Einbaumessschieber, um das richtige Modell eindeutig zuzuordnen. Welche Vorteile bietet das Big Screen Swiss Electronics Display? Das große Display sorgt für bessere Ablesbarkeit bei variablen Lichtverhältnissen und reduziert Ablesefehler, was zu schnelleren Prüfzyklen und verlässlicheren Ergebnissen bei der Fertigungskontrolle führt. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
2000mm Einbaumessschieber, 0,001mm Ablesung, IP 67, Swiss Electronics, Einbauausführung – Microtech Metrology
Einbaumessschieber von Microtech Metrology Der Einbaumessschieber ist ein digitales Messgerät für Langmessungen in Produktion und Werkstatt und verbindet einen großen Messbereich mit robuster Schutzart und feinfühliger Ablesbarkeit. Einbaumessschieber von Microtech Metrology Messbereich bis 2000 mm für Langmessungen Ablesung 0,001 mm für feine Kontrolle Schutzart IP 67 für staub- und wasserdichten Einsatz Swiss Electronics Display für klare Anzeige Präzision und Reichweite für großformatige Bauteile Der Schieber wurde für Anwendungen mit großem Messraum konzipiert und bietet einen Messbereich bis 2000 mm. Diese Lang‑Einordnung macht das Messgerät zur ersten Wahl bei längeren Wellen, Gehäusen oder Vorrichtungen, weil sie ein gutes Verhältnis aus Reichweite und Handhabbarkeit bietet. Die lange Messlänge erlaubt reproduzierbare Längenprüfungen an Serienteilen und erleichtert das Einmessen von Aufnahmen, während die Bauweise auf ausreichende Profilsteifigkeit ausgelegt ist. Robuste Konstruktion für rauen Werkstatteinsatz Mit der Schutzart IP 67 ist das Messgerät gegen Eindringen von Staub und zeitweiliges Eintauchen geschützt, was den Einsatz direkt an Produktionslinien oder in feuchten Fertigungsbereichen vereinfachen kann. Das Gehäuse und die Montagepunkte sind auf Einbau in Maschinengeräte und Vorrichtungen ausgelegt, sodass das Display sicher ablesbar bleibt. Das Swiss Electronics Display sorgt für klare Ziffern und reduzierte Fehlablesungen auch bei ungünstiger Beleuchtung. Ablesegenauigkeit versus Messgenauigkeit erklärt Die angegebene Ablesung von 0,001 mm ermöglicht die Darstellung feinster Zwischenschritte, die praktische Genauigkeit liegt bei 0,05 mm und entspricht damit einem robusten Industrielevel für viele Fertigungsprozesse. Für die Qualitätskontrolle bedeutet das: schnell sichtbare feine Auflösungen bei gleichzeitig nachvollziehbarer Messunsicherheit. Anwender profitieren von der Kombination aus detaillierter Anzeige und brauchbarer Toleranzspurweite für Werkstattprüfungen. Einbau, Anwendung und Zielgruppe Als Einbauvariante eignet sich das Messgerät besonders für Maschinenbauer, Vorrichtungsbauer und Werkstätten, die eine integrierte Längenrückmeldung benötigen. Die digitale Anzeige macht die Messwerte unmittelbar verfügbar, ohne separate Ausleseeinheit, was Montagezeiten verkürzt. Die Zielgruppe umfasst Produktionsbetriebe mit Bedarf an Langmessungen, Instandhaltungsabteilungen und Lehrwerkstätten, die robuste, klar ablesbare Messmittel bevorzugen. Empfehlung: Nutzen Sie den Einbaumessschieber von Microtech Metrology mit seinem großen Messbereich und der Schutzart IP 67 als zuverlässiges Messmittel für Langmessungen — erhältlich über Metav Werkzeuge GmbH in Emmerich; bei Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 142520146 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459979 Anzeige: Swiss Electronics Fakten Messbereich: 0-2000 mm Genauigkeit: 0,05 mm Ablesung: 0,001 mm Schutzart: IP 67 Besonderheiten Digitale Ausführung Messbereichsklasse: Lang (bis 2000 mm) Einbauvariante Geeignet für Werkstatt und Produktion FAQ Wie groß ist der Messbereich dieses Einbaumessschiebers? Der Messbereich beträgt 0–2000 mm; damit ist der Einbaumessschieber von Microtech Metrology für Langmessungen an großen Bauteilen geeignet. Welche Ablesegenauigkeit bietet das Gerät? Die Anzeige liefert eine Ablesung von 0,001 mm, während die praktische Genauigkeit bei 0,05 mm liegt; diese Kombination ermöglicht feine Anzeige mit industrietauglicher Messunsicherheit. Ist das Messgerät für nasse oder staubige Umgebungen geeignet? Ja, die Schutzart IP 67 schützt das Gerät gegen Staub und zeitweiliges Eintauchen, wodurch es sich für anspruchsvolle Fertigungsumgebungen empfiehlt. Für welche Anwender ist dieser Einbaumessschieber besonders geeignet? Das Messgerät richtet sich an Maschinenbau, Vorrichtungsbau, Instandhaltung und Qualitätskontrolle, die Langmessungen an Wellen, Gehäusen oder Vorrichtungen durchführen. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
200mm Built-In Digital Caliper Color 1.54" Touchscreen, Wireless/USB, IP54 - Microtech Metrology
Take advantage of high-resolution measurement (0.001 mm) combined with Wireless + USB data transfer and a splash-protected housing for reliable integration into production lines. Order the built-in caliper directly via Metav Werkzeuge or consult our specialists for system adaptation. Built-in digital caliper by Microtech Metrology — Colour touchscreen & Wireless + USB The built-in digital caliper is a machine‑integration ready measuring instrument for shop‑floor quality control and fixture-mounted applications. Colour 1.54" touchscreen display Wireless and USB data output Resolution 0.001 mm, accuracy 0.012 mm IP54 splash-protected design Seamless integration for automated measuring Designed for straightforward installation in fixtures and machines, this built-in caliper simplifies digitised measurement workflows. The Wireless + USB outputs allow direct connection to data loggers, SPC systems or PCs, reducing manual transcription and accelerating inspection cycles. With an IP54 rating the unit tolerates typical workshop dust and splash exposure, maintaining dependable operation in production environments. The compact integration format supports retrofit and new‑build applications where space and repeatability are critical. Precision and repeatability for routine quality checks Engineered for reliable shop‑floor accuracy, the instrument combines a fine resolution of 0.001 mm with a stated accuracy of ±0.012 mm, making it suited for standard mechanical and metalworking inspections. High display resolution provides clear, immediate readings while the accuracy figure defines the expected measurement uncertainty in documented checks. This balance of fine readout and practical accuracy supports traceable quality control without over‑specifying instruments for everyday workshop tasks. Faster measurement, less paperwork The large Colour 1.54" touchscreen offers intuitive operation and rapid visual confirmation of values, lowering training time and reducing user errors. Digital transfer via Wireless + USB eliminates manual entry and enables automated data capture for batch documentation or process feedback loops. The device's standard‑range format (0–200 mm) aligns with common workshop needs, delivering the reach and stiffness typical for universal caliper tasks while supporting efficient part handling and faster inspection throughput. Discuss integration and ordering with Metav Werkzeuge to specify the Microtech Metrology built-in digital caliper equipped with Wireless + USB for robust, traceable measurements on the shop floor. Technical data Article number: 142502141 GTIN: 4061905458828 Manufacturer: Microtech Metrology Facts Measurement range: 0–200 mm Resolution: 0.001 mm Accuracy: ±0.012 mm Display: Colour 1.54" touchscreen Protection class: IP54 Special features Data output: Wireless + USB Digital display Standard‑range caliper (100–300 mm) Built‑in design ECLASS: 21170344 FAQ What environments is this caliper suitable for? The built-in digital caliper is designed for workshop and industrial shop‑floor conditions; its IP54 rating protects against dust and splashes typical in machining and assembly areas. Can measurement data be exported automatically? Yes — the instrument supports both Wireless and USB outputs for direct export to PCs, SPC systems or data loggers, enabling automated traceability and reduced manual input. What measurement range and precision does the device offer? The caliper covers 0–200 mm with a resolution of 0.001 mm and an accuracy of ±0.012 mm, offering fine readout and dependable repeatability for standard quality tasks. Who manufactures this instrument and how is it identified? This measuring instrument is produced by Microtech Metrology and is listed under article number 142502141 (GTIN 4061905458828). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Built-In Digital Caliper Colour 1.54" Touchscreen, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of certified measurement reliability and modern data transfer in a compact, workshop‑ready instrument: calibrated to ISO 17025, the unit delivers ±0.015 mm accuracy and both Wireless + USB outputs for streamlined quality control. Order the caliper directly via Metav Werkzeuge or consult Metav’s specialists for integration advice. Built-in digital caliper by Microtech Metrology — 1.54" touchscreen, Wireless + USB A built-in digital caliper offering calibrated precision and direct data transfer for standard machine‑shop and inspection tasks. Colour 1.54" touchscreen display Wireless and USB data output ISO 17025 calibration with certificate Certified accuracy for repeatable inspection results The built‑in digital caliper is supplied fully calibrated to ISO 17025, including a calibration certificate that documents traceability and measurement validity. With a stated accuracy of ±0.015 mm and an indicated reading increment of 0.005 mm, the instrument provides a balance between practical resolution and industrial reliability. This level of performance reduces the need for repeat measurements and supports consistent pass/fail decisions in production control, making it suitable for routine dimensional checks and incoming‑goods inspections where traceable results are required. Seamless data handling to reduce transcription errors Equipped with Wireless + USB data outputs and a 1.54" touchscreen colour display, the instrument simplifies capture and transfer of measured values. Digital output eliminates manual entry, speeding up documentation and lowering the risk of transcription mistakes during batch inspections. The touchscreen shows clear readouts and quick menus for unit conversion and zeroing; combined with the wireless link, this allows measurements to be logged directly into inspection software or spreadsheets, supporting efficient quality workflows on the shop floor. Robust construction for daily workshop use Constructed from stainless steel and rated IP54 for protection against dust and splashes, the caliper is designed for the realities of a busy workshop. The 0–200 mm measuring range places it in the Standard class of calipers, which is the preferred balance between reach and rigidity for general machine‑shop duties. The compact, mountable format suits fixed inspection stations or integrated measuring fixtures where stable, repeatable readings are required without sacrificing durability. Practical applications and integration benefits This caliper is well suited to metalworking, component inspection and quality assurance tasks where certified results and seamless data capture are priorities. The device integrates into existing inspection routines thanks to its wired USB option for direct connection and wireless capability for flexible measurement setups. Microtech Metrology’s calibrated instrument is therefore a pragmatic choice where documented accuracy and reliable data flow deliver measurable improvements in throughput and traceability. Contact Metav Werkzeuge in Emmerich for delivery details, assistance with integration and to receive the ISO 17025 calibration certificate supplied with this Microtech Metrology instrument Technical Data Article number: 142502140 GTIN: 4061905037009 Manufacturer: Microtech Metrology Facts Measuring range: 0–200 mm Accuracy: 0.015 mm Resolution: 0.005 mm Display: Colour 1.54" touchscreen Protection class: IP54 Special features Material: stainless steel Data output: Wireless + USB Digital instrument ISO 17025 calibration certificate included FAQ Is the caliper delivered with a calibration certificate? Yes. The caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate from Microtech Metrology. What data interfaces are available for integration? The instrument provides Wireless + USB outputs to support both wireless logging and wired data capture into inspection systems. What accuracy and resolution can be expected in daily use? The instrument specifies ±0.015 mm accuracy with a display increment of 0.005 mm, offering reliable results for standard workshop and inspection tasks. Which measuring range category does the caliper belong to? With a 0–200 mm range, the caliper falls into the Standard class, suited to general metalworking and machine‑shop applications. Is the device suitable for use in a production environment? Yes. The stainless steel construction and IP54 rating make it robust enough for workshop conditions, and the digital outputs support fast data capture for production inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Built-In Caliper Vertical Stainless, Bidirectional Measurement, DIN 862 - Metav IndustryLine
Take advantage of the combination of a capacitive measuring system, clear digital readout and DIN 862 conformity to keep production checks fast and reliable; the 200 mm measuring range balances reach and rigidity for everyday workshop tasks. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital built-in caliper M218.255 (Metav IndustryLine) — capacitive, 200 mm The Digital built-in caliper M218.255 is a vertical, capacitive 200 mm precision caliper designed for standard workshop and production measurement to DIN 862. Capacitive measuring system 200 mm measuring range DIN 862 compliant Data output RB 5 Consistent accuracy for reliable production control The instrument delivers a measured accuracy of ±0.03 mm with a display resolution of 0.01 mm, which places it within the expectations for industrial quality control. The 200 mm span classifies the device as a standard-length caliper, offering an optimal trade-off between reach and stiffness for machining and metalwork. The capacitive measurement principle helps maintain repeatability under typical shop conditions, so tolerance checks remain consistent across shifts and operators. Integration and handling that streamlines inspection A compact digital display with ON/OFF, mm/inch, ABS (zero), TOL, DIR and HOLD keys provides immediate control over measurement mode and tolerance checks, reducing operator steps during inspection routines. The built-in design suits vertical mounting and the RB 5 data output facilitates connection to data collection or SPC systems, so measured values can be recorded automatically for process documentation. This capability saves time and supports traceable quality records. Robust construction for everyday workshop use Made in a stainless configuration and complying with DIN 862, the caliper is built for routine shop handling and regular use within production environments. The device permits measurement in both directions, which simplifies repetitive tasks and reduces reorientation time for series inspection. Together, these attributes lower the risk of measurement-related delays and help sustain a steady production flow. Choose the Metav IndustryLine caliper for dependable process control and contact Metav Werkzeuge in Emmerich for technical advice or supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M218.255 GTIN: 4054469111865 Label: Digital built-in caliper, 200 mm, vertical, stainless; DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Display resolution: 0.01 mm (0.0005 inch) Stated accuracy: ±0.03 mm Measurement system: capacitive Special features Digital display with ON/OFF, mm/inch, 0/ABS, TOL, DIR, HOLD keys Data output: RB 5 Measurement in both directions possible Compliant with DIN 862 Category: caliper (Messschieber) ECLASS: 21170344 FAQ What level of accuracy can be expected from this caliper? The Digital built-in caliper M218.255 is specified with an accuracy of ±0.03 mm and a display resolution of 0.01 mm, suitable for standard workshop quality control. Can the caliper send measurements to a data system? Yes — the device provides an RB 5 data output, enabling integration with data collection or SPC systems for automatic recording of measured values. Is the instrument suitable for both metric and imperial measurements? The built-in digital display supports both mm/inch modes via a dedicated key, allowing quick switching between units during inspection. Does the caliper require a specific mounting orientation? This model is designed as a vertical, built-in caliper for installation where a vertical orientation is needed; the design supports straightforward integration into fixtures and inspection stations. Is the caliper compliant with industry standards? The instrument is delivered in a version that conforms to DIN 862, providing assurance for routine measurement tasks in machining and metalworking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Einbaumessschieber senkrecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem überzeugenden Preis. HIGHLIGHTS senkrecht Messbereich: bis 200mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 0–200mm, die im Alltag zählen Der Messbereich 0 – 200mm bietet spürbare Freiheit bei typischen Bauteilgrößen. Übergänge von grober Kontrolle zu feiner Prüfung gelingen ohne Bruch im Ablauf. Im allgemeinen Maschinen- und Metallbau erweist sich dieser Bereich als tragfähige Basis für konstante Ergebnisse. Die Arbeit bleibt flüssig, weil die relevanten Dimensionen im direkten Zugriff sind. Das schafft Sicherheit in jeder Projektphase. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber.. Die richtige Toleranz einhalten durch Fertigung nach weltweit gültigen Standards Unser Einbaumessschieber Metav IndustryLine basiert vollständig auf den Richtlinien der DIN 862. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Informationen zur technischen Ausstattung für digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.455 Zahlen und Fakten: Messbereich: 0 bis 200mm Gewicht: 0,3kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 330mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv senkrecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Außerdem sollte man untersuchen, ob ein kalibrierter Messschieber sinnvoll ist. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Einbaumessschieber von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
200mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Die überragenden Bewertungen von Metav Werkzeuge stehen für über 42.000 glückliche Kunden. Probiere es aus und shoppe auf metav-shop.de.! Verlässlich im Alltag Der Messbereich bis 200mm deckt die gängigsten Bauteilgrößen im Alltag zuverlässig ab. Von Rohteilen bis zu fertigen Komponenten bleibt genügend Spielraum für wiederkehrende Aufgaben. Die Handhabung fügt sich flüssig in Arbeitsabläufe ein und sorgt für zügige Kontrollen zwischendurch. Im allgemeinen Maschinen- und Metallbau liefert dieser Bereich klare, reproduzierbare Ergebnisse. So entsteht Tempo ohne Hektik und Präzision ohne Umwege. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Direkt auf das Audit vorbereitet durch Fertigung nach DIN 862 Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Einbaumessschieber erfüllt die Anforderungen der DIN 862 in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Produktspezifikationen zumdigitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.355 Daten zum Werkzeug: Messbereich: 0 bis 200mm Gewicht: 0,3kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 330mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden.
200mm Digital Precision Caliper Built-In Horizontal Stainless Steel, 0.01mm Resolution, DIN 862 - Metav IndustryLine
Reliable shop-floor measurement with 0.01 mm resolution, hardened stainless steel construction and a compact built‑in housing for horizontal mounting; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital built-in caliper M218.155.N — 200 mm, hardened stainless (Metav IndustryLine) A Digital built-in caliper M218.155.N designed for horizontal installation and routine workshop measurement tasks 200 mm measuring range, standard workshop length Hardened stainless steel construction Digital display with ON/OFF, ZERO, UNIT, HOLD Conforms to DIN 862, accuracy ±0.03 mm Accurate standard-range measurement for production control The M218.155.N is a 200 mm class caliper that addresses the typical demands of machine and metal workshops by combining a practical measuring span with laboratory‑grade readability. With a resolution of 0.01 mm and an operational accuracy of ±0.03 mm, the instrument delivers repeatable numeric results that simplify pass/fail decisions and reduce rework. The hardened stainless steel construction ensures dimensional stability and resistance to wear, while the compact design suits built‑in horizontal mounting where space is limited. Compliance with DIN 862 provides a familiar reference for procurement and quality documentation. Faster digitised readings and system integration for traceability The compact digital interface reduces transcription errors and accelerates routine checks: the display features ON/OFF, ZERO, UNIT and HOLD controls for immediate, unambiguous readings. Data output is provided via RB 5, enabling simple connection to data collection or SPC systems for batch reporting and process monitoring. Powered by a 3 V cell, the measuring head offers low maintenance and reliable operation in serial inspection or production environments, improving throughput without sacrificing measurement integrity. Robust build and ergonomic fit for everyday use Designed as a built‑in device with a small housing, this caliper balances rigidity and accessibility on the workshop bench or inside fixtures. The hardened stainless steel measuring faces sustain frequent contact and deliver consistent results over time, while the modest weight facilitates installation and reduces strain on mounting points. Classified in the standard range (100–300 mm), the instrument is ideal where reach, stiffness and one‑hand operation must be balanced—making it a pragmatic choice for jigs, fixtures and routine quality control. For an application review or to discuss integration of the Metav IndustryLine digital built‑in caliper M218.155.N into production, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M218.155.N GTIN: 4054469160757 Category: Digital built-in caliper Manufacturer brand: Metav IndustryLine Small housing, horizontal installation Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Weight: 0.3 kg Power supply: 3 V battery Display: ON/OFF, ZERO, UNIT, HOLD Special features Material: hardened stainless steel Standard: DIN 862 Data output: RB 5 Digital built-in format Compact housing for tight spaces FAQ What measuring range does the caliper cover? The M218.155.N digital built‑in caliper from Metav IndustryLine covers a measuring range of 0–200 mm, making it suitable for standard workshop and machine‑shop tasks. What are the resolution and stated accuracy? The Metav IndustryLine M218.155.N offers a display resolution of 0.01 mm with an operational accuracy of ±0.03 mm, consistent with its intended production‑control role. Can the caliper be connected to data collection systems? Yes, the M218.155.N provides a data output via RB 5 and is powered by a 3 V cell, allowing straightforward integration into SPC or data‑logging workflows. Is the instrument robust enough for daily workshop use? The M218.155.N is built from hardened stainless steel with a compact housing designed for horizontal built‑in mounting, offering durability and repeatable performance for routine inspections. Does the caliper come with a calibration certificate? The M218.155.N meets DIN 862 standards; specific calibration certificates or calibration services can be requested for documented traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Capacitive System 0.01mm Readout, DIN 862 - Metav IndustryLine
Take advantage of the combination of compact 200 mm range, 0.01 mm resolution and a lightweight aluminium measuring beam for reliable shop-floor measurement. Order the caliper directly via Metav Werkzeuge or consult the sales team for integration advice. M218.265 Digital built-in caliper, 200 mm — aluminium beam & separate display (Metav IndustryLine) The M218.265 is a capacitive digital built-in caliper intended for workshop and production measurement tasks up to 200 mm, supplied with a rugged aluminium profile and a separate external display for flexible mounting and clear readout 200 mm measurement range, workshop standard Capacitive sensor, 0.01 mm resolution Separate external display for easy reading Precise, repeatable readings for routine quality control The instrument uses a capacitive measuring system together with a standard 0.01 mm display resolution to deliver reproducible results suitable for daily inspection and machining tasks. Compliance with DIN 862 ensures the caliper meets recognised workshop tolerances, while the specified accuracy ±0.06 mm provides predictable measurement uncertainty for typical production checks. The capacitive sensing element offers low friction and minimal wear, supporting consistent readings over a long service life without requiring frequent mechanical adjustments. Built for integration and clear operation in confined setups A slim aluminium beam keeps the assembly light and easy to handle while maintaining sufficient stiffness for a 200 mm span; the whole unit weighs approximately 0.45 kg. The separate external display simplifies installation on machines, test fixtures or gauging stands and allows the readout to be positioned where it is most convenient. The digital readout includes ON/OFF, ZERO, mm/inch, ABS and SET functions, and the inch display resolution of 0.0005 in supports quick cross-checks between metric and imperial systems without the need for conversion tables. Standard-range versatility for machine shops and assembly lines Classified as Standard (100–300 mm), this caliper balances reach, rigidity and single-handed usability — characteristics valued in machine- and metalworking environments. The 200 mm measuring span is well suited to component workpieces, fixtures and assemblies that require routine dimensional control. The separate display and capacitive sensing make the instrument a pragmatic choice for inline gauging where mounting flexibility and robust, repeatable readings matter more than submicron laboratory precision. Choose the Metav IndustryLine M218.265 for dependable 200 mm workshop measurement; contact Metav Werkzeuge in Emmerich for technical advice and rapid supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M218.265 GTIN: 4054469163857 Manufacturer: Metav IndustryLine Core data Measurement range: 0–200 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: 0.06 mm Weight: 0.45 kg Standard: DIN 862 Tariff number: 90173000 Special features Measuring beam material: aluminium profile Measuring system: capacitive Display functions: ON/OFF, ZERO, mm/inch, ABS, SET Separate external display for remote readout Digital caliper suitable for workshop and production use FAQ What measurement range does the caliper cover? The M218.265 covers a measuring range of 0–200 mm, placing it in the standard workshop category for general machine‑shop tasks. What resolution and accuracy are provided? The device offers a display resolution of 0.01 mm (0.0005 in) with a specified accuracy of 0.06 mm for routine quality checks. Which measuring standard does the instrument adhere to? Manufactured to the requirements of DIN 862, the caliper meets conventional tolerances expected in industrial measurement applications. What readout and function options are available on the display? The separate external display provides ON/OFF, ZERO, mm/inch, ABS and SET functions for flexible operation and simple unit switching. Is the aluminium measuring beam suited to shop use? Yes; the aluminium profile combines low weight with sufficient stiffness for the 200 mm span, making it practical for shop-floor measurement and easy integration into fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2500mm Built-In Digital Caliper Colour 2.4" Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of the combination of an extra‑long measuring range (0–2500 mm), Wireless + USB data output and a 2.4" colour touchscreen to measure large components reliably and integrate results into quality workflows; order the built-in caliper directly via Metav Werkzeuge or consult their experts for specification support. Built-in caliper by Microtech Metrology — 2.4" colour touchscreen, 0–2500 mm A built-in caliper designed for extra‑long measurements up to 2,500 mm, combining a clear 2.4" colour touchscreen with wireless and USB data transfer for production and workshop integration. Extra‑long measuring range 0–2500 mm 2.4" colour touchscreen display Wireless and USB data output IP54 protection for workshop use Measure large components with reproducible results The built-in caliper is classified as Extra‑Long (2,000–5,000 mm) and is engineered for large‑format components such as ducts, large housings and segmented assemblies. The extended measuring range 0–2500 mm provides reach without sacrificing handling, while a specified accuracy of 0.07 mm and a display resolution of 0.01 mm make it suitable for routine workshop inspection and process control. The distinction between resolution and accuracy is crucial: the display shows increments at 0.01 mm, but measurement uncertainty is defined by the 0.07 mm tolerance, which informs acceptance criteria for large parts. Integrate measurements into digital workflows Data transfer is simplified by the Wireless + USB outputs and the intuitive 2.4" colour touchscreen, which together reduce manual transcription and speed up batch documentation. Wireless transmission allows defect lists and dimensional logs to be sent directly to inspection software or spreadsheets, while USB provides a reliable wired option for offline capture. The caliper’s digital interface supports faster quality checks and smoother documentation, which translates into higher throughput and fewer process interruptions on the shop floor. Built for everyday production environments With an IP54 protection rating and a purpose‑built installation form, this caliper tolerates dust ingress and water splashes common in manufacturing settings. The robust design aids reproducibility over long measuring lengths by preserving profile stiffness and alignment across the beam. The device’s compact operator interface and straightforward mounting concept reduce setup time for fixtures and gauges, so measurement of large assemblies becomes a routine, dependable step in production and incoming inspection. For dependable extra‑long measurement capability and seamless data integration, contact Metav Werkzeuge to discuss the Microtech Metrology built-in caliper (SKU 142525140) and how it fits into your quality workflow. Technical data Article number: 142525140 GTIN: 4061905458958 Manufacturer: Microtech Metrology Category: Digital caliper Core technical data Measuring range: 0–2500 mm Resolution (display): 0.01 mm Accuracy: 0.07 mm Display: 2.4" colour touchscreen Protection rating: IP54 Special features Data output: Wireless + USB Digital: yes Built-in caliper design eClass: 21170344 FAQ How precise is the device for large components? The built-in caliper (Microtech Metrology, SKU 142525140) has an accuracy of 0.07 mm and a display resolution of 0.01 mm, making it suitable for repeatable dimensional checks on large parts. Can measurement data be exported directly to quality systems? Yes, the caliper offers Wireless + USB data output for direct transfer to inspection software, spreadsheets or data loggers, supporting digital documentation workflows. Is the instrument suitable for use in a production environment? The instrument’s IP54 rating and robust built‑in design make it appropriate for routine workshop use where dust and splash protection are required. What range of parts can be measured with this caliper? With a measuring range of 0–2500 mm, the device is tailored to extra‑long components such as large housings, pipes and segmented assemblies where extended reach is essential. Does the display support straightforward operation on the shop floor? The 2.4" colour touchscreen provides clear readout and simple control, reducing operator training time and speeding measurements during series checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Built-In Digital Caliper With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibration Included - Microtech Metrology
Take advantage of a combination of long‑span measurement capability, micrometre‑level resolution and traceable calibration for reliable inspection of large components; the unit’s Wireless + USB connectivity and integrated touchscreen speed up data capture and downstream processing. Order through Metav Werkzeuge or ask the consultants for configuration guidance. Built-in caliper — Digital instrument with 2.4" colour touchscreen and 0–2,500 mm range (Microtech Metrology) A built-in caliper designed for precision measurement of large assemblies, offering an extra‑long range up to 2,500 mm with digital readout and modern data interfaces for integration into workshop and production environments High‑precision range up to 2,500 mm Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included Precision over long spans to reduce rework and inspection time The unit is classified for extra‑long measurements and delivers a measuring span to 2,500 mm, which is advantageous when checking large housings, rails or pipes without transferring parts between fixtures. With a reading resolution of 0.001 mm, the instrument supports micrometre‑class differentiation; this level of resolution reduces the need for secondary measurement steps and shortens inspection loops. The built‑in design keeps the measurement axis stable over the full length, enabling reproducible results where stiffness and repeatability are critical. Fast data capture and seamless workflow integration Equipped with a 2.4" colour touchscreen, the instrument simplifies parameter selection and visual confirmation of readings; tactile controls reduce keyboard dependency on the shop floor. Measurement data can be exported via Wireless or USB, allowing direct transfer to inspection software or SPC systems and minimising manual transcription errors. The included HD microscope with a 7" LED display supports visual checks and micro‑inspections alongside dimensional measurement, combining optical verification with numerical data to speed decision making. Robust construction for industrial use and easy mounting The caliper is built from aluminium, chosen for a balance of rigidity and manageable weight in long‑span applications. The profile and carriage geometry are optimised for a built‑in installation, so the instrument integrates neatly into machine tables or gauging fixtures and maintains alignment during repeated use. This construction reduces thermal mass and helps stabilise measurements after short warm‑up periods, which benefits throughput where many large parts are inspected in sequence. Traceable calibration and ready‑to‑use delivery Delivered fully calibrated according to ISO 17025, the instrument arrives with a calibration certificate that documents traceability and measurement conformity for quality records and audits. The calibration and the digital output capabilities make the device suitable for regulated production environments and quality labs that require documented evidence of measurement capability. The accessory set, including the HD microscope with its 7" LED display, provides an immediate, practical extension of the measuring function for combined dimensional and visual inspection tasks. For long‑format measurement tasks, request technical configuration or delivery options from Metav Werkzeuge — Metav’s experts in Emmerich can advise on integration and mounting for the Microtech Metrology built‑in caliper (SKU 142525158); contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 142525158 GTIN: 4061905036934 ECLASS: 21170344 Facts Measuring range: 0–2,500 mm Resolution (reading): 0.001 mm Display size: 2.4" touchscreen Special features Material: aluminium Data output: Wireless and USB Digital display: Colour 2.4" touchscreen ISO 17025 calibrated; calibration certificate included Included accessory: HD microscope with 7" LED display Brand: Microtech Metrology Category: Built‑in caliper (digital) FAQ What measuring range does the instrument cover? The built‑in caliper from Microtech Metrology covers a measuring range up to 2,500 mm and is optimised for extra‑long component inspection (SKU 142525158). Is the device delivered calibrated for acceptance in quality systems? Yes — the instrument is supplied fully calibrated to ISO 17025 standards and includes the calibration certificate for traceability and audit documentation. Which data interfaces are available for recording measurements? Measurement data are available via Wireless and USB outputs to facilitate direct integration with inspection software and data collection systems. Does the package include any optical accessories for visual checks? An HD microscope with a 7" LED display is included, enabling combined dimensional measurement and visual inspection alongside numerical results. What construction materials and mounting style are used? The main profile is aluminium, configured as a built‑in unit suitable for integration into fixtures or machine tables where long, stable measurement spans are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Digitaler Einbaumessschieber, 0,01mm Auflösung, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Der Einbaumessschieber kombiniert Extra‑Langen Messbereich, robuste IP67‑Schutzart und eine gut ablesbare Big Screen Swiss Electronics Anzeige, sodass große Bauteile sicher und reproduzierbar vermessen werden können. Bestellen Sie den Einbaumessschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber ist ein digitaler Langschieber für großformatige Messaufgaben und eignet sich speziell für die Messung großer Bauteile in Fertigung und Montage. Extra‑Langes Messformat: bis 2500 mm Robust durch IP 67 Schutzart Großes Display: Big Screen Swiss Electronics Auflösung 0,01 mm für feine Ablesung Geeignet für Rohr‑ und Behälterbau Präzision über lange Strecken für reproduzierbare Messungen Bei langen Messlängen entscheidet Profilsteifigkeit über Reproduzierbarkeit. Der Einbaumessschieber bietet einen Messbereich bis 2500 mm, wodurch er der Kategorie Extra‑Lang zugeordnet werden kann und sich für großformatige Komponenten wie Rohre oder Gehäuse eignet. Durch die Kombination aus stabilem Träger und digitaler Anzeige wird die Messung über mehrere Meter hinweg beherrschbar, während sich manuelle Fehlerquellen verringern lassen. Messgenauigkeit und Anzeige für verlässliche Ergebnisse Die Anzeige ermöglicht eine Auflösung von 0,01 mm, sodass feine Maßabweichungen sichtbar werden. Die angegebene Genauigkeit von 0,09 mm beschreibt die Güte der Gesamtausgabe und sollte bei der Auswahl der Prüfvorschriften berücksichtigt werden. Für Anwender bedeutet das: schnelle Kontrollen mit guter Auflösung und eine spezifizierte Genauigkeit, die sich in Fertigungsabläufe und Prüfprozesse einplanen lässt. Schutz und Zuverlässigkeit in rauer Umgebung Die Schutzart IP67 sorgt dafür, dass der Schieber gegen Staub geschützt ist und kurzfristiges Eintauchen in Wasser unbeschadet übersteht. In Arbeitsumgebungen mit Kühlschmierstoff‑ oder Emulsionskontakt reduziert diese Eigenschaft Wartungsaufwand und Stillstandsrisiken. Die robuste Ausführung macht das Gerät zur zuverlässigen Lösung für Produktionslinien und Montagehallen. Einsatz und Integration in der Werkstattpraxis Dank der großen Anzeige Big Screen Swiss Electronics sind Messergebnisse auch bei schlechtem Licht gut ablesbar, was die Bedienung beschleunigt. Die digitale Architektur erlaubt effiziente Prüfabläufe und erleichtert die Einbindung in dokumentierte Messprotokolle. Anwender können den Schieber dort einsetzen, wo lange Längen und eine praktikable Handhabung gefragt sind, etwa bei Vorrichtungsbau, Rohrmontage oder schweren Baugruppen. Für präzise Langmessungen empfiehlt sich der Einbaumessschieber von Microtech Metrology; bestellen über Metav Werkzeuge oder direkt anfragen per info@metav-werkzeuge.com / Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 142525147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459764 Digitalanzeige: Big Screen Swiss Electronics ECLASS: 21170344 Fakten Messbereich: 0-2500 mm Messbereich max: 2500 mm Auflösung (Ablesung): 0,01 mm Genauigkeit: 0,09 mm Schutzart: IP 67 Besonderheiten Ausführung: Extra‑Lang (Messbereich 2500 mm) Digitale Messung Kategorie: Messschieber Digital Einsatzbereich: großformatige Komponenten FAQ Welche Messlänge deckt der Einbaumessschieber ab? Der Einbaumessschieber von Microtech Metrology deckt einen Messbereich bis 2500 mm ab und ist damit für großformatige Messaufgaben in Fertigung und Montage geeignet (SKU 142525147). Wie fein lässt sich mit dem Schieber ablesen? Die Anzeige des Einbaumessschiebers bietet eine Auflösung von 0,01 mm, sodass kleinste Längenänderungen sichtbar werden; das Gerät kombiniert diese Auflösung mit einer spezifizierten Genauigkeit von 0,09 mm. Ist der Schieber für den Einsatz in feuchten Umgebungen geeignet? Ja. Der Einbaumessschieber besitzt die Schutzart IP 67, wodurch er gegen Staub geschützt ist und kurzzeitiges Eintauchen in Wasser unbeschadet übersteht. Welche Anzeige kommt beim Gerät zum Einsatz? Verwendet wird die Anzeige Big Screen Swiss Electronics, die große, gut lesbare Ziffern für schnelle Ablesung liefert. Für welche Anwendungen empfiehlt sich der Einbaumessschieber? Der Einbaumessschieber eignet sich besonders für Anwendungen im Rohr‑ und Behälterbau, im Vorrichtungs‑ und Formenbau sowie überall dort, wo große Messlängen gefordert sind (Microtech Metrology, SKU 142525147). Hersteller: Microtech; Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
260mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Vertriebsunternehmen von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste auf einen Blick für Metav IndustryLine 100mm Einbaumessschieber waagerecht Messbereich: bis 100mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 Wenn jedes Hundertstel zählt Mikro‑Schieblehre in 0–100mm Messlänge für filigrane Bauteile, enge Zugänge und genaue Ergebnisse in Feinstmechanik und Uhrmacherei. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Verlässliche Präzision durch Fertigung nach DIN 862 Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Einbaumessschieber erfüllt die Anforderungen der DIN 862 in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Expertenhinweis: Reinige regelmäßig Deine Messwerkzeuge. Damit stellst Du sicher, das Dein Messwerkzeug lange erhalten bleibt. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Spezifikationen zumdigitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.353 Zahlen Fakten: Messbereich: 0 bis 100mm Gewicht: 0,25kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 260mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Messschieber kaufen geachtet werden sollte: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Für die Qualitätssicherung sowie Laboreinsätze erweist sich der Messschieber mit geregelter Messkraft als besonders nutzbringend. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden.
300 mm Digital Precision Caliper With Remote Display, 0.01 mm Resolution, Steel Beam, Magnetic Back - Metav IndustryLine
The combination of an absolute measuring system, a separate remote display and robust steel construction delivers reliable, workshop-ready precision for standard measuring tasks up to 300 mm; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital inset caliper ABS, 300 mm with separate display — Metav IndustryLine digital caliper with remote readout The Digital inset caliper ABS, 300 mm is a standard-range precision caliper designed for machine shops and quality control stations, offering a separate indicator for flexible positioning and an absolute measuring system for stable zero reference. Absolute measuring system, 0.01 mm resolution Separate remote display with 2 m cable Steel measuring rod for high stiffness RB6 and Micro‑B data outputs included Precise measurement where it matters The inset style caliper uses an absolute measuring system to retain its zero reference, reducing setup time and avoiding lost origin points after power cycles. With a resolution of 0.01 mm and a stated accuracy of ±0.03 mm across the 0–300 mm range, the instrument matches typical expectations for the standard-shop category, delivering dependable results for production checks and component verification. The separate indicator simplifies reading in confined or awkward positions while the clear digital display supports mm, inch and fractional readouts. Easy integration into inspection workflows Equipped with RB6 and Micro‑B outputs and supplied with an approximately 2 m connection cable, the caliper is prepared for data capture and downstream process control. The remote display enables mounting on a fixture or test bench, keeping the measuring head free for fast tactile work. Battery operation (2× CR2032) maintains autonomous use at the point of measurement; data output options support routine logging without the need for manual transcription, improving traceability in serial inspection tasks. Built to tolerate workshop conditions The measuring rod is manufactured from steel to provide the profile stiffness required in everyday metalworking environments, while the caliper’s rear magnet and measurement preset/hold functions improve usability during repeated tasks. The instrument’s weight and dimensions are balanced for single‑handed handling over the standard 300 mm range, giving a good compromise between reach and rigidity. This makes the tool suitable for general machine‑shop use, fixtures and small‑series quality control. Choose the Metav IndustryLine digital inset caliper for consistent shop-floor accuracy and contact Metav Werkzeuge in Emmerich for tailored technical guidance and order support Technical Data Article number: M218.276 GTIN: 4054469163901 Category: Messschieber (calipers) Label: Digital inset caliper ABS, 300 mm with separate display Data Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Weight: 0.45 kg Power supply: 2× CR2032 Connection cable: approx. 2 m Special features Measuring system: Absolute (ABS) Remote display with separate mounting Data outputs: RB6, Micro‑B Display modes: mm, inch, fractional Material: Steel measuring rod Preset and hold measurement function Rear magnet for secure positioning Standard range classification: Standard (100–300 mm) FAQ How accurate is the caliper over its full range? The declared accuracy is ±0.03 mm across the 0–300 mm measuring range, matching expectations for a standard digital caliper used in workshop and production environments. Can the display be mounted separately from the measuring head? Yes. The separate remote display can be positioned away from the measuring beam and is supplied with a connection cable of approximately 2 m for convenient mounting. Which output options are available for data capture? The instrument provides RB6 and Micro‑B data outputs for direct connection to data loggers or inspection stations, enabling digital recording of measurements. Is the measuring rod suitable for routine metalworking use? The measuring rod is made from steel to provide the stiffness and durability required for regular shop use with workpieces in machine and metalworking applications. Does the caliper show both metric and imperial values? Yes. The display supports measurements in mm, inch and fractional formats for flexible use across different drawing and reporting standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3000mm Built-In Digital Caliper Color 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of certified accuracy, an extra‑long 3000 mm measuring range and flexible Wireless + USB data transfer for reliable in‑line metrology. Order the built‑in precision caliper directly via Metav Werkzeuge or contact the consultants for integration advice. Built-in Precision Caliper — 0–3000 mm, Colour 2.4" touchscreen (Microtech Metrology) The Built-in Precision Caliper is a robust integration caliper engineered for long‑range metrology and inline measurement tasks in fixtures, production lines and large‑format component inspection. ISO 17025-calibrated with certificate Measuring range up to 3000 mm Wireless and USB data interfaces Colour 2.4" touchscreen display Integration‑grade design that keeps production moving The integration caliper is designed to be mounted directly into jigs, fixtures or machine frames, providing a reliable measurement range of 3000 mm without the need for repeated repositioning. The aluminium construction offers a favourable stiffness‑to‑weight ratio so the instrument remains dimensionally stable across its span; this reduces rework and speeds up routine checks. As a result, inline checks can be scheduled with confidence and fewer process interruptions, improving throughput and equipment utilisation. Certified traceability for critical quality control Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate that documents traceability to national standards. Such certification supports quality audits and simplifies acceptance into formal inspection plans. The device's fine resolution 0.001 mm enables verifiable results for demanding tolerances, while the calibration report provides clear evidence for quality management systems and compliance requirements. Fast data flow and visual inspection in one unit Equipped with Wireless and USB interfaces and a 2.4" touchscreen, the caliper enables immediate data capture and integration with measurement software or PLCs. The digital touchscreen visualises readings and status at a glance, while the included HD microscope with 7" LED display facilitates close visual checks during setup and troubleshooting. Together these elements shorten diagnosis time and reduce the number of handling steps between measurement and process correction. Built for workshop resilience and operator efficiency The long‑span caliper balances reach and usability: its design supports large components while remaining manageable for maintenance teams. The lightweight yet stable Aluminium frame eases handling during installation and reduces strain during periodic verification. Clear on‑screen readout and standardised data outputs mean the instrument can be used effectively by shop‑floor technicians as well as metrology staff, lowering training effort and supporting quicker decision cycles. Contact Metav Werkzeuge for integration planning, delivery from Emmerich and tailored calibration options via phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 142530158 GTIN: 4061905037238 Brand: Microtech Metrology Facts Measuring range: 0–3000 mm Resolution: 0.001 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Special features Material: Aluminium Digital: yes Delivered calibrated to ISO 17025 with certificate Included accessory: HD microscope with 7" LED display FAQ What measuring range does the caliper cover? The built‑in precision caliper covers a measuring range of 0–3000 mm, suitable for large assemblies and long components. Is the instrument delivered calibrated? Yes. The caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audit purposes. Which data interfaces are available for process integration? The device offers both Wireless and USB outputs for straightforward connection to data‑collection systems and PLCs. Can the unit be used for inline machine measurement? The caliper is designed for mounting in fixtures and production lines, providing stable long‑range measurements for inline quality control. What visual aids are supplied for inspection and setup? An HD microscope with 7" LED display is included to assist with close visual inspection during setup and adjustment of the measuring station. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3000mm Built-In Digital Caliper Colour 2.4" Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of the combination of a 3,000 mm measuring range, 2.4" colour touchscreen and both Wireless and USB data output for faster data capture and streamlined production measurement. Order the device directly via Metav Werkzeuge or consult our specialists for integration advice. Built-in digital caliper — extra-long range with touchscreen and wireless + USB output (Microtech Metrology) The built-in digital caliper provides long‑reach metrology for large components and fixtures, combining an extra‑long 3,000 mm range with a colour touch display and integrated data interfaces for seamless process integration. Extra‑long 3,000 mm measuring range 2.4" colour touchscreen for direct control Wireless and USB data output for traceable transfers IP54 rating for workshop durability Measure large assemblies with reproducible results A measuring device with an extra‑long 3,000 mm range is intended for large parts such as housings, shafts and pipe sections where a standard caliper’s reach is insufficient. The extended span reduces the number of individual measurements and alignments required, which in turn lowers cumulative error and improves throughput. The robust construction needed for this length maintains profile stiffness so measurements remain repeatable over the full travel; this makes the instrument suitable for use in production inspection and assembly lines where large-format components are routinely checked. Built‑in display and data transfer to speed up workflows The integrated 2.4" colour touchscreen simplifies operation and visual verification at the point of measurement, while the dual Wireless and USB data output enables direct transfer of readings into quality databases and SPC systems. The display supports clear numeric read‑out and simple menu navigation, and the wireless link reduces manual transcription. A reading resolution of 0.01 mm gives clear position steps for standard digital measurement tasks, and electronic data capture reduces process time and the risk of human error during data logging. Rugged design that tolerates shop conditions Designed for workshop environments, the instrument carries an IP54 rating, offering resistance to dust ingress and splashing coolant or oil. The engineering balances long travel with a protective housing and reliable electronics; this combination maintains functional stability and extends service intervals. The stated accuracy of 0.08 mm reflects the device’s capability across its full measuring range and is indicated for applications where large‑format geometry must be controlled rather than submicron laboratory tasks. Integration and installation benefits for production use As a built‑in style measuring solution, the unit is intended for incorporation into fixtures, gauging stations or machine interfaces. The form factor and the available data outputs mean the device can be tied into automated measurement routines or used as a fixed inspection point on the shop floor. This approach streamlines quality control, reduces handling of heavy parts and supports a continuous measurement flow that benefits production line stability and traceability. Contact Metav Werkzeuge today for tailored integration advice and a quotation for the Microtech Metrology built‑in digital caliper with a 3,000 mm range and wireless + USB data output Technical Data Manufacturer: Microtech Metrology SKU: 142530140 GTIN: 4061905458965 eCl@ss: 21170344 Data output: Wireless+USB Display: Color 2.4" Touchscreen IP protection: IP 54 Digital instrument: yes Facts Measuring range: 0–3000 mm Minimum range: 0 mm Maximum range: 3000 mm Resolution (reading): 0.01 mm Accuracy: 0.08 mm Special features Built‑in / integration design Colour touchscreen interface Wireless data transmission USB data connection Suitable for large component measurement FAQ How suitable is the instrument for very large components? The extra‑long measuring range up to 3,000 mm makes the caliper appropriate for large assemblies, enabling fewer setups and more reproducible checks across extended parts. Can measurement values be exported to quality software? Yes — readings are transferred via Wireless and USB connections so data from the device can be imported into SPC systems or inspection databases without manual re‑entry. What protection does the instrument offer against workshop contaminants? The unit is rated IP54, which provides protection against dust ingress that could interfere with operation and against splashing liquids commonly encountered in machining environments. What resolution and accuracy can be expected during routine inspections? The display resolution is 0.01 mm, and the stated accuracy for the instrument is 0.08 mm, suitable for large‑format production controls where repeatability over long travel is the priority. Is the touchscreen suitable for gloved operation and fast checks? The 2.4" colour touchscreen is configured for clear numeric display and simple control; it supports efficient checks and quick visual confirmation at the measurement point. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3000mm Einbaumessschieber, 0,01mm Auflösung, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Die Kombination aus großem Messbereich, robuster IP‑67‑Schutzklasse und präziser Ablesung 0,01 mm macht den Einbaumessschieber zur verlässlichen Lösung für großformatige Messaufgaben in der Fertigung. Bestellbar direkt über Metav Werkzeuge; technische Beratung ist verfügbar, falls Schnittstellen oder Einbaumöglichkeiten geklärt werden müssen. Einbaumessschieber – Digitaler Einbaumessschieber von Microtech Metrology Das Einbaumessschieber bietet digitale Messwertanzeige und Industrieintegration für großformatige Bauteile und Fertigungsanlagen Einbaumessschieber von Microtech Metrology Messbereich bis 3000 mm für Großteile IP 67 Schutzklasse für raue Einsatzbedingungen Ablesung 0,01 mm mit Big Screen Anzeige Einbaumontage für fertigungsgerechte Integration Robuste Integration für großformatige Messungen Der Einbaumessschieber wurde für Anwendungen mit erweitertem Messbereich entwickelt und eignet sich besonders für die Vermessung großer Komponenten. Durch den maximalen Messbereich von 3000 mm fällt das Gerät in die Kategorie Extra‑Lang, was bedeutet, dass die Konstruktion auf Reproduzierbarkeit und Profilsteifigkeit ausgelegt ist. Diese Eigenschaften reduzieren Messunsicherheit bei langgezogenen Messungen und erleichtern die direkte Integration in Messstationen und Fertigungslinien. Präzision und einfache Ablesung für Qualitätskontrolle Trotz der großen Messlängen bietet das Gerät eine Ablesung 0,01 mm, die die Kontrolle von Fertigungstoleranzen ermöglicht. Die Big Screen Swiss Electronics Anzeige liefert gut ablesbare Zahlenwerte auch in beengten Umgebungen und unterstützt schnelle Prüfzyklen. Die nominale Genauigkeit von 0,1 mm ist anwendungsabhängig zu bewerten; für standardisierte Produktionskontrollen stellt die Kombination aus Reichweite und Ablesbarkeit einen effizienten Kompromiss zwischen Messgenauigkeit und Handhabbarkeit dar. Einsatzfelder, bei denen dieser Messschieber punktet Anwendungen im Rohr‑ und Behälterbau, in der Schwerzerspanung und bei großen Gehäusen profitieren vom großzügigen Messbereich und der robusten Ausführung. Der Einbaumessschieber lässt sich in Vorrichtungen einbauen, um wiederkehrende Prüfungen zu automatisieren, und ist damit geeignet für Fertigungsstraßen mit hohem Durchsatz. Die digitale Anzeige vereinfacht Dokumentation und Rückverfolgung von Messergebnissen innerhalb von Prozessketten. Schutz und Materialbeständigkeit für den rauen Werkstattalltag Die IP 67 Schutzklasse bietet Schutz gegen Staub und zeitweiliges Untertauchen, sodass das Gerät auch in feuchten oder verschmutzten Fertigungsbereichen eingesetzt werden kann. Die Auslegung auf Einbaumontage reduziert mechanische Belastungen während des Betriebs und verlängert die Lebensdauer der Messeinheit. Für Transport und Einbau sind passende Montagerahmen und Befestigungsvarianten zu prüfen, um Messtoleranzen dauerhaft sicherzustellen. Empfehlung: Den Einbaumessschieber von Microtech Metrology über Metav Werkzeuge GmbH für integrierte Großmessungen einsetzen; technische Beratung und Anbindungshinweise per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erhältlich Produktmerkmale Artikelnummer: 142530147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459771 Daten Messbereich: 0-3000 mm Messbereich (Max): 3000 mm Ablesung: 0,01 mm Genauigkeit: 0,1 mm IP-Schutz: IP 67 Besonderheiten Digitale Anzeige: Big Screen Swiss Electronics ECLASS: 21170344 Digitales Messgerät für Einbaumontage Geeignet für Extra‑Lang Messaufgaben FAQ Wie groß ist der maximale Messbereich dieses Messschiebers? Der maximale Messbereich beträgt 3000 mm; der Einbaumessschieber von Microtech Metrology eignet sich damit für großformatige Messaufgaben in Fertigung und Montage. Welche Auflösung bietet die Anzeige? Die Anzeige liefert eine Ablesung von 0,01 mm über die Big Screen Swiss Electronics Anzeige, was schnelle und fehlerarme Prüfungen ermöglicht. Ist das Instrument für raue Umgebungen geeignet? Ja, die Schutzklasse IP 67 schützt gegen Staub und zeitweiliges Untertauchen, sodass der Einbaumessschieber auch in verschmutzten Fertigungsbereichen eingesetzt werden kann. Für welche Anwendungen ist dieses Modell besonders geeignet? Typische Einsatzfelder sind Rohr‑ und Behälterbau, Schwerzerspanung und die Vermessung großer Gehäuse; das Gerät ist auf Einbaumontage und Prozessintegration ausgelegt. Welche Artikelnummer hat das Produkt für Bestellungen und Rückfragen? Die Artikelnummer lautet 142530147; bei technischen Fragen zu Einbau oder Integration kann diese SKU zur eindeutigen Identifikation genutzt werden. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
300mm Built-In Digital Caliper Color Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of the combination of reliable ±0.015 mm accuracy, fine 0.001 mm resolution and seamless Wireless + USB data transfer for efficient workshop measurement and digital documentation; order procurement assistance or technical advice from Metav Werkzeuge for fast integration into existing quality workflows. Built-in digital caliper — Microtech Metrology, 1.54″ colour touchscreen, Wireless + USB A built-in digital caliper for standard machine-shop measurement tasks, combining tactile workshop robustness with direct digital output for straightforward process integration and quality control. Colour 1.54″ touchscreen display Wireless and USB data interface Measurement range 0–300 mm IP54 dust and splash protection Precision that keeps production consistent The digital caliper delivers high repeatability by combining a fine 0.001 mm resolution with an accuracy of ±0.015 mm, a balance that supports general workshop quality control and inspection tasks. In practice, that means repeatable results for component checks, set‑up measurements and incoming inspection without the need for repeated manual interpolation. The slightly tighter-than-standard tolerance compared with many entry instruments reduces rework and improves first‑pass yield, while the solid sliding action and built‑in design keep handling error to a minimum. Seamless data capture to speed up workflows Equipped with Wireless and USB data outputs and a colour 1.54″ touchscreen, this instrument simplifies the transfer of measurements into SPC systems or spreadsheet records. Direct digital transfer avoids transcription errors and saves operator time during batch testing or when logging serial inspections. The touchscreen provides clear readouts and quick unit switching, which helps standardise measurement routines and supports traceable documentation for production records and audits. Robust design for everyday workshop use Protected to IP54, the caliper resists workshop dust and light splashing, so it remains dependable at the bench or on the shop floor. With a measurement range of 0–300 mm, it falls within the standard caliper class that offers the best compromise between reach and stiffness for general metalworking and fixture inspection. The built‑in format keeps the instrument compact within measuring stations, while the digital electronics and solid mechanical construction reduce calibration drift and vibration sensitivity during routine use. For procurement and application advice on Microtech Metrology built‑in digital calipers, contact Metav Werkzeuge in Emmerich — expert guidance and supply coordination are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 142503141 GTIN: 4061905458941 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Display: Colour 1.54" touchscreen Protection class: IP54 Data output: Wireless, USB Special features Digital caliper, standard range (100–300 mm) Built‑in design for integration in measuring fixtures Colour touchscreen for clear readout and unit switching Wireless connectivity for direct data logging FAQ What measurement range does the caliper cover? The instrument covers a measurement range of 0–300 mm, placing it in the standard caliper class suitable for everyday machine‑shop and metalworking tasks. What accuracy and resolution can be expected? The caliper offers a resolution of 0.001 mm and an accuracy of ±0.015 mm, providing reliable repeatability for standard inspection and set‑up measurements. How can measurement data be exported? Measurements can be transferred via Wireless connection or USB, enabling direct logging into SPC systems or spreadsheets without manual re‑entry. Is the instrument suitable for harsh workshop environments? With IP54 protection, the tool resists dust ingress and light splashing, making it robust enough for bench and shop‑floor use. Who manufactures the caliper and how is it identified? The caliper is manufactured by Microtech Metrology and is supplied under article number 142503141 (GTIN 4061905458941). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Built-In Caliper With Separate Display 0.01mm Resolution, Capacitive System - Metav IndustryLine
Take advantage of the combination of a 300 mm measuring range, 0.01 mm resolution and a lightweight aluminium measuring beam for reliable, repeatable shop‑floor measurement; the capacitive sensor and separate readout facilitate built‑in installation and clear monitoring. Order the caliper directly via Metav Werkzeuge or ask our advisers for integration guidance. Digital built‑in caliper ALU, 300 mm – Capacitive system with separate display (Metav IndustryLine) The Digital built‑in caliper ALU, 300 mm is a flush‑mount capacitive caliper with a remote display designed for standard workshop and production measurement tasks, offering fast, repeatable readings for component inspection and process control. 0.01 mm resolution Separate remote display Aluminium profile measuring beam Capacitive measurement technology Precision that supports production consistency The instrument delivers 0.01 mm display resolution alongside a specified accuracy of 0.06 mm, ensuring a measurable improvement in pass/fail decisions and set‑up verification compared with lower‑resolution gauges. Classified in the Standard (100–300 mm) category, the caliper provides a practical balance of reach and stiffness for everyday tasks in machine shops and metalworking environments, making it suited to routine quality checks and assembly inspections without compromising repeatability. Clear readout and reliable signal processing for fast decisions A separate, built‑in display houses the On/Off, Zero, mm/inch, ABS and Set controls to simplify workshop workflows and reduce the need to handle the measuring head during readout. The capacitive measuring system minimises contact noise and drift, delivering stable digital values for quick recording. The remote display arrangement allows the measuring beam to be mounted in confined or recessed positions while retaining an ergonomic, easy‑to‑view readout for operators on the bench. Lightweight construction with robust workshop characteristics The measuring beam is an aluminium profile, giving a low mass (approx. 0.45 kg) and easier handling during installation and maintenance while maintaining sufficient rigidity for a 300 mm span. The digital built‑in design protects the electronics and sensor during series use and supports fixed installations in jigs or fixtures where space is limited. These design choices reduce operator fatigue and help maintain consistent contact pressure and repeatable measurement results across shifts. Practical fit for manufacturing and inspection processes This caliper suits standardised production environments where clear digital values and compact installation are required. The combination of a capacitive sensor, separate readout and common control functions such as mm/inch conversion and ABS mode supports rapid checks, incoming inspection and simple process control tasks. Metav IndustryLine components are positioned to provide accessible precision for workshops that require dependable measurement without complex setup. For advice on integrating the Metav IndustryLine digital built‑in caliper with 0.01 mm resolution and separate display into production or inspection equipment, contact Metav Werkzeuge in Emmerich for tailored delivery and configuration support Technical data Article number: M218.266 GTIN: 4054469163864 Manufacturer: Metav IndustryLine Weight: 0.45 kg EClass: 21170344 Numbers Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Accuracy: 0.06 mm Measuring system: capacitive Display functions: On/Off, Zero, mm/inch, ABS, SET Special features Measuring beam: aluminium profile Built‑in installation with separate remote display Digital caliper, capacitive sensor technology Remote display with basic function keys FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–300 mm and is classified as a Standard length instrument suitable for general workshop and machine‑shop use. What is the display resolution and can it show imperial units? The instrument displays 0.01 mm resolution and supports inch readout at 0.0005 in via the mm/inch function on the separate display. How is the readout arranged for recessed or built‑in installations? The caliper uses a separate remote display so the measuring beam may be mounted in confined or recessed positions while the readout remains accessible for the operator. Which sensor principle is used and what does that mean for stability? A capacitive measuring system is used; this provides stable digital readings with reduced susceptibility to mechanical contact noise compared with some simpler sensing methods. Is the measuring beam suitable for routine industrial use? Yes, the beam is an aluminium profile, offering a low mass of approx. 0.45 kg with adequate stiffness for everyday inspection and assembly tasks on a 300 mm span. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Einbaumessschieber senkrecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Vertriebsunternehmen von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste für den Einbaumessschieber senkrecht Messbereich: bis 300mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 300mm für gängige Werkstücke Der Messbereich bis 300mm deckt die gängigsten Bauteilgrößen im Alltag zuverlässig ab. Von Rohteilen bis zu fertigen Komponenten bleibt genügend Spielraum für wiederkehrende Aufgaben. Die Handhabung fügt sich flüssig in Arbeitsabläufe ein und sorgt für zügige Kontrollen zwischendurch. Im allgemeinen Maschinen- und Metallbau liefert dieser Bereich klare, reproduzierbare Ergebnisse. So entsteht Tempo ohne Hektik und Präzision ohne Umwege. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Ausführung DIN 862 Unser Messwerkzeug basiert vollständig auf den Richtlinien der DIN 862. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Expertenhinweis: Was ist bei der Reinigung der Messschenkel wichtig? Ein Fussel- oder Ölfilm von wenigen µm reicht, um Zehntel mm zu verfälschen. Deshalb vor jeder Messung die Messflächen mit einem fusselfreien Tuch abwischen. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Produkteigenschaften für den digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.456 Zahlen: Messbereich: 0-300mm Gewicht: 0,35kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,04mm Länge: 430mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv senkrecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Messschieber kaufen geachtet werden sollte: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Ein Messschieber mit sorgfältig kalibrierter Messkraft ist speziell für die Qualitätssicherung und die Nutzung in Laboren von Vorteil. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern.
300mm Digital Precision Caliper Horizontal Small Head Stainless Steel 3V DIN 862 - Metav IndustryLine
Reliable workshop metrology: a compact, 300 mm digital flush-mounted caliper with 0.01 mm resolution and hardened stainless‑steel construction delivers reproducible measurements to DIN 862 standards; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital flush-mounted caliper M218.156.N — 300 mm, 0.01 mm resolution, Metav IndustryLine M218.156.N is a horizontal, compact digital flush-mounted caliper designed for standard machine‑shop and workshop measurement tasks up to 300 mm. Digital display with 0.01 mm resolution 300 mm measurement range for workshop use Hardened stainless steel construction Complies with DIN 862 standard Precise readings that reduce rework The instrument offers a resolution of 0.01 mm combined with a stated accuracy of ±0.03 mm, providing the repeatability required for routine quality checks and machine‑shop inspections. Classified in the Standard range (measurement span to 300 mm), the device balances reach and rigidity so that one‑handed measurements remain reliable across common components. The clear digital display and straightforward key set make rapid decisions possible, supporting lean production workflows and lower scrap rates. Robust design and straightforward operation Built from hardened stainless steel, the caliper withstands workshop environments while preserving measuring faces and slide integrity. The small, horizontal housing suits flush or panel mounting where space is limited; at approximately 0.4 kg the unit is lightweight for installation without compromising profile stiffness. Operation is simple: the display includes ON/OFF, ZERO, UNIT and HOLD functions for quick setup, unit switching and temporary value retention. Powered by a 3 V supply, the instrument is optimised for low energy consumption and extended service intervals. Data output and practical integration A dedicated RB 5 data output enables digital capture of measurements for SPC collection or direct transfer to inspection software, reducing transcription errors and speeding up process documentation. The caliper’s adherence to DIN 862 ensures compatibility with established measuring procedures and acceptance criteria, making it a pragmatic choice for production, incoming goods inspection and workshop fixtures. Integration capability and clear traceable results translate into measurable time savings on repetitive tasks. Discuss your application with Metav Werkzeuge – our Metav IndustryLine specialists will advise on integration, mounting options and delivery for the M218.156.N flush‑mounted caliper Technical data Article number: M218.156.N GTIN: 4054469160764 ECLASS: 21170344 Tariff code: 90173000 Facts Measurement range: 0–300 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.4 kg Power supply: 3 V Display: digital with ON/OFF, ZERO, UNIT, HOLD Special features Material: hardened stainless steel Standard: DIN 862 Mounting: horizontal, small housing (flush-mounted) Data output: RB 5 Category: digital caliper (Standard class) FAQ Is this caliper suitable for general workshop and machine‑shop use? Yes. The M218.156.N is a Standard‑range digital caliper (0–300 mm) that meets DIN 862 and offers the resolution and accuracy commonly required in machine building and routine workshop inspection. What power source does the instrument require? The caliper runs on a 3 V supply and features a digital display with ON/OFF, ZERO, UNIT and HOLD keys for simple operation. Can measurements be transmitted to a data logger or SPC system? Yes. The device provides an RB 5 data output for connection to compatible data collectors and inspection software, enabling direct digital capture of readings. What is the construction material and how does that help in the workshop? Manufactured from hardened stainless steel, the caliper resists corrosion and wear, helping to maintain measurement integrity and reducing the need for frequent replacement. How accurate are the readings for quality control purposes? With a 0.01 mm display resolution and a stated accuracy of ±0.03 mm, the caliper is well suited for standard quality control tasks where reproducible, traceable measurement results are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Precision Caliper With Bi-Directional Measurement, Capacitive System, DIN 862 - Metav IndustryLine
Compact integration and recognised workshop standards combine to deliver reliable measurement where it matters; the 300 mm range and capacitive measuring technology ensure repeatable checks for production and inspection tasks. Order the Digital built-in caliper M218.256 directly via Metav Werkzeuge or ask our consultants if needed. Digital built-in caliper M218.256 — 300 mm capacitive system, stainless (Metav IndustryLine) Digital built-in caliper M218.256 tailored for vertical panel mounting, offering a robust measuring solution for machine-shop inspection and production environments Capacitive measurement for stable digital readings 300 mm stainless design for workshop environments DIN 862 compliance for recognised traceability Multi-function display with mm/inch and TOL Integration-ready format that keeps production moving The built-in format allows direct installation into control panels and test fixtures, providing a compact interface for shop-floor measurement without bulky external housings. Fitted with a capacitive measuring system, this caliper delivers stable, repeatable outputs suitable for data logging via the RB 5 interface; the compact weight and stainless construction simplify installation and resist workshop contaminants. As a Standard-range instrument (0–300 mm), it balances reach and rigidity, making it appropriate for everyday machine-shop tasks and quality-control stations where consistent throughput and reliable data transfer are priorities. Accuracy and traceability for routine quality checks With a resolution of 0.01 mm on the digital display and an indicated accuracy of ±0.03 mm, the instrument is configured for standard industrial inspection per DIN 862. The numerical specifications support clear pass/fail decisions when combined with the display's tolerance function, reducing subjective judgement in repetitive checks. This level of performance addresses typical metrology needs in metalworking and engineering departments, offering confidence when documenting dimensions for production orders or inspection reports. Practical operation and durable workshop design Operation is focused on efficiency: the display provides ON/OFF, mm/inch, zero/absolute, tolerance (TOL), direction (DIR) and hold functions to speed routine measurements and support mixed workflows. The vertical stainless housing resists corrosion and is easy to clean after machining shifts, while the overall design supports straightforward panel mounting. Integration benefits are complemented by the unit’s modest mass and compact form factor, which reduce mechanical strain on mounting structures and help maintain measurement repeatability across long production runs. For panel-integration advice, delivery from Emmerich and tailored supply of the M218.256 contact Metav Werkzeuge for precise information and assistance Technical Data Article number: M218.256 GTIN: 4054469111872 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: ±0.03 mm Weight: 0.5 kg Tariff number: 90173000 Special features Measuring system: capacitive Compliance: DIN 862 Data output: RB 5 Display functions: ON/OFF, mm/inch, 0/ABS, TOL, DIR, HOLD Construction: vertical stainless Mounting type: built-in Category: Standard (0–300 mm range) FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–300 mm, making it a Standard-range instrument ideal for general machine‑shop and inspection tasks. Is the display capable of metric and imperial units? Yes, the display supports both mm and inch; the resolution is 0.01 mm and 0.0005 in respectively for the Digital built-in caliper M218.256. Which interface is available for data transfer? The unit provides an RB 5 data output for integration into data-collection systems and panel wiring. Does this instrument conform to recognised standards? The caliper is manufactured to comply with DIN 862, providing established traceability and suitability for workshop inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Digital Caliper Colour Touchscreen, IP54, ISO 17025 Calibrated - Microtech Metrology
The combination of a stainless steel construction, ISO 17025 calibration and flexible Wireless + USB data transfer supports precise, traceable measurements and efficient workflow integration. Order the built-in caliper directly via Metav Werkzeuge or ask the consultants for application advice. Built-in caliper — Digital standard caliper with wireless + USB and colour touchscreen (Microtech Metrology) Built-in caliper for standard workshop and production measurement tasks, offering a 0–300 mm measuring range with industrial connectivity for integration into inspection and production workflows Standard measuring range 0–300 mm ISO 17025 calibrated with certificate Colour 1.54" touchscreen display Wireless + USB data output Precision that fits everyday production needs This digital measuring instrument is designed for the standard caliper class (measuring range 0–300 mm), which provides an effective balance between reach and stiffness for general machining and inspection tasks. The instrument delivers a reading resolution of 0.005 mm and a stated accuracy of ±0.02 mm, values that meet common workshop and machine-shop quality-control requirements. By selecting a device with a stainless steel frame and the specified tolerances, the measurement process becomes reproducible and suitable for routine component checks and incoming‑goods inspection. Faster workflows through integrated connectivity Data transfer is available via Wireless + USB, allowing measured values to be logged directly into inspection software or connected data-collection systems without manual transcription. The colour 1.54" touchscreen provides clear numeric readout and simple on-screen controls, reducing operator handling time and lowering the risk of transcription errors. These features combine to shorten the inspection loop and support traceable documentation for quality records. Robust design and certified calibration for traceability Constructed from stainless steel with IP54 protection, the instrument resists workshop contaminants while remaining serviceable in regular production environments. The device is delivered fully calibrated under ISO 17025 standards and includes the calibration certificate, ensuring traceability for audits and compliance checks. This makes the caliper suitable where documented measurement provenance is required, for example in supplier qualification or internal quality management. Where this caliper adds value on the shop floor The built-in form factor simplifies installation into measurement stations or fixtures where a fixed, easy-to-read measuring element is preferred. The combination of a robust housing, tactile touchscreen and standardised data interfaces supports integration into digital inspection routines and contributes to consistent quality control across shifts. The instrument is therefore well suited to machine shops, maintenance departments and small-series production where reliable, repeatable measuring is essential. For assured precision and documented traceability, contact Metav Werkzeuge to discuss how the Microtech Metrology built-in caliper can be integrated into existing workflows or to request the calibration certificate and ordering details; Metav Werkzeuge handles delivery from Emmerich and can advise on technical requirements Technical Data Article number: 142503140 GTIN: 4061905037337 Brand: Microtech Metrology Material: stainless steel Measuring range: 0–300 mm Resolution: 0.005 mm Accuracy: ±0.02 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Protection class: IP54 Digital: yes ISO 17025 calibration: included Facts Measuring range max: 300 mm eClass: 21170344 SKU: 142503140 Special features Built-in design Wireless + USB interface Delivered with calibration certificate Stainless steel construction FAQ What measuring range does this caliper cover? The built-in caliper covers a measuring range of 0–300 mm, corresponding to the standard class suitable for general machine‑shop and workshop tasks. Is the instrument supplied calibrated and traceable? Yes — the caliper is delivered fully calibrated under ISO 17025 and includes the calibration certificate for traceability. Which interfaces are available for data transfer? Measurement values can be exported via Wireless + USB, enabling direct connection to inspection software or data-capture systems. What protection does the unit offer against workshop contaminants? The instrument has an IP54 rating, providing resistance against dust ingress and splashing water in typical workshop conditions. What is the declared accuracy and resolution? Declared resolution is 0.005 mm with an accuracy of ±0.02 mm, making it suitable for standard production quality control. Can this caliper be integrated into a fixed measurement station? Yes — the built‑in design is intended for installation in fixtures or stations where a fixed measuring element and stable readout are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Increase process reliability with built-in calipers
Built-in calipers, also known as digital mounting systems or linear measuring strips, provide a cost-effective route to digitise existing machine tools, test rigs, fixtures and special-purpose machines. They permanently capture travel and positions along linear axes and convert mechanical movement into precise digital readings, improving throughput, reducing scrap and cutting manual set-up times.
How built-in calipers fit into your production flow
Engineered for direct machine integration, these systems are mounted to the moving or stationary parts of an axis so that motion is translated immediately into measurable data. The design allows horizontal and vertical mounting, while construction from high-resistance materials keeps the units dust, oil and splash-water resistant. Where access to the measuring strip is restricted, a separate, cable-connected LCD display may be positioned in the operator’s line of sight. Practical functions such as zero point setting at any position, inch-metric conversion and modern data interfaces enable straightforward transfer of positional data to higher-level control systems and process-logging equipment.
Clear production benefits you can measure
- Faster set-up: built-in calipers reduce manual adjustment time and ease repeatable setups.
- Lower scrap rates: continuous, precise position feedback minimises dimensional errors.
- Better integration: digital mounting systems provide live positional data for machine controls and quality systems.
- Increased uptime: robust linear measuring strips tolerate shop-floor contaminants and extend service intervals.
- Improved ergonomics: remote display placement keeps readings accessible without compromising machine access.
Metav as your precision partner in every workshop
Metav stands for democratisation of precision. From its base in Emmerich, Metav combines decades of application know-how with a comprehensive range that makes high-accuracy measurement attainable for industry, craft and trade. With over 48,000 customers and more than 250,000 products, Metav acts as a quality filter for the European market, supplying built-in calipers and digital mounting systems with dependable logistics and product expertise.
In brief
Built-in calipers and their synonyms — digital mounting systems and linear measuring strips — translate machine movement into accurate digital values, boosting productivity and reducing waste in industrial environments.
FAQ
How are built-in calipers mounted and oriented on a machine?
Built-in calipers can be mounted horizontally or vertically depending on the axis orientation; mounting method is chosen to ensure the measuring strip follows the machine motion precisely and remains protected from contaminants.
Can the display be placed away from the measuring strip?
Yes. Many digital mounting systems include a separate, cable-connected LCD display that can be positioned in the operator’s line of sight even when the linear measuring strip is hard to access.
Do built-in calipers support both imperial and metric units?
Built-in calipers typically offer inch-metric conversion, allowing measurements to be displayed in imperial or metric units as required for the process.
How are positional values transferred to a control system?
Linear measuring strips provide modern data interfaces for the transfer of positional data to higher-level control systems or process-logging equipment, enabling closed-loop control and data collection.
Are built-in calipers suitable for harsh workshop conditions?
Yes. The construction of these digital mounting systems from high-resistance materials renders them dust, oil and splash-water resistant, making them well suited to demanding shop-floor environments.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com