Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
300x200 mm Inspection Square Flat, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
Benefit from certified DIN 875/1 accuracy, a hardened stainless-steel construction and a flat blade geometry that ensures stable seating during setup — ideal for reliable workshop inspection and machine alignment. Order the Inspection square 300 x 200 mm directly via Metav Werkzeuge or ask our consultants if needed. Inspection square 300 x 200 mm — DIN 875/1 hardened stainless-steel angle gauge (Metav IndustryLine) The Inspection square 300 x 200 mm is a hardened stainless-steel angle gauge designed for shop-floor alignment, bench inspection and quality-control tasks where DIN 875/1 accuracy is required. DIN 875/1 certified accuracy Hardened stainless-steel construction Flat blade profile for stable contact Compact 300 x 200 mm working length Dependable alignment for routine inspection and setup A workshop needs tools that deliver repeatable results with minimal fuss. The combination of DIN 875/1 conformity and a hardened stainless-steel body provides a measurable baseline for squareness checks on assemblies, machine beds and fixtures. The compact 300 x 200 mm format balances reach with rigidity, so angle checks stay reliable without awkward handling. This makes the square a practical choice for production inspection and maintenance routines where consistent right angles are essential. Low-maintenance design that supports repeatable measurement The flat blade geometry described in the product data reduces point loading and improves seating against reference surfaces, which helps to cut down on measurement scatter. Because the body is manufactured from hardened stainless steel, corrosion resistance is improved and surface wear is reduced; that reduces the need for frequent replacement or refurbishing. Together, these attributes contribute to predictable, long-term performance and fewer interruptions in the inspection workflow. Clear benefits for quality control and machine alignment In practice, the tool speeds up common tasks such as setting up jigs, checking squareness of welded frames and verifying fixture alignment before production runs. The robust construction supports repeated contact with metal components without immediate loss of geometry, while the standardised DIN 875/1 grade gives purchasing and quality teams a verifiable accuracy class to specify in documentation. For workshops aiming to standardise inspection routines, the instrument provides an accessible, traceable reference for right-angle checks. For precise angle checks and standard-compliant inspection aids, request detailed technical data or place an order with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.328 GTIN: 4054469108131 Standard: DIN 875/1 Dimensions: 300 x 200 mm ECLASS: 21170119 Customs tariff number: 90178090 Facts Material: hardened stainless steel Construction: flat blade profile Special feature: flach Category: Winkel (angle gauge) Special features Brand: Metav IndustryLine Usage: workshop inspection, machine alignment, quality control Finish: corrosion-resistant stainless surface Compliance: DIN 875/1 grade reference FAQ What accuracy class does this square meet? The inspection square meets the DIN 875/1 classification; the standardised grade indicates suitability for general workshop inspection and alignment tasks. Is the body corrosion-resistant for shop-floor use? Yes. The tool is made from hardened stainless steel, which improves resistance to corrosion and reduces maintenance in typical workshop environments. For which applications is the 300 x 200 mm size most suitable? The 300 x 200 mm format is intended for bench inspection, fixture checks and machine-alignment tasks where a compact yet stiff reference is required. How does the flat blade geometry affect measurement? The flat profile improves seating against reference surfaces, reducing point contact and helping to produce more consistent right-angle measurements during repeated checks. Does the square come with a traceable article number? Yes; the instrument is listed as M214.328 and is supplied with the product identifiers shown above for traceability and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200 mm Precision Square With Stop, Hardened Measuring Edge, Stainless Steel, DIN 875/00 - Metav IndustryLine
Reliable angle control for inspection and layout tasks is achieved by combining DIN 875/00 accuracy with a hardened measuring edge and a clear hairline reference. The robust stainless construction delivers long-term corrosion resistance and repeatable results in production or quality control. Order the hairline square directly via Metav Werkzeuge or consult their specialists for application support. Hairline square 300 x 200 mm (with stop) — Metav IndustryLine precision square The Hairline square 300 x 200 mm is a workshop and inspection instrument designed for accurate right-angle checks and scribing; it serves as an engineers' square with a fixed stop for repeatable positioning. DIN 875/00, Class 00 precision Hardened measuring edge for wear resistance Stainless steel, matt chrome finish Fixed stop for repeatable positioning Accuracy that keeps production within tolerance The instrument complies with DIN 875/00, Class 00, which defines a very small angular deviation suitable for demanding workshop or inspection tasks. The finely engraved hairline provides a precise optical reference for alignment and scribing, while the hardened measuring edge resists wear that could otherwise degrade accuracy over time. This combination means fewer rechecks and more reliable measurement results in assembly and inspection routines. Built to withstand workshop conditions A matt-chrome finish on stainless steel gives the square strong corrosion resistance and a professional feel, suited to everyday use in machining, toolmaking and maintenance environments. The hardened edge reduces the need for replacement, increasing tool life and lowering long-term operating costs. As a precision instrument, it supports repeatable right-angle verification so that fixtures and assemblies maintain consistent geometry through production runs. Practical design for efficient workflow The built-in stop simplifies repetitive tasks by providing a fixed datum for scribing or part positioning, helping to reduce cycle time in layout operations. The hairline feature makes fine adjustments visible at a glance, improving speed and confidence during inspections. Supplied as a ready-to-use precision square, the tool integrates into existing quality workflows and complements gauges and calipers used in standard workshop metrology. For reliable right-angle control and wear-resistant performance, contact Metav Werkzeuge to discuss the Metav IndustryLine hairline square and receive tailored application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: M214.108 GTIN: 4054469106656 Category: Angle square (Winkel) Facts Dimensions: 300 x 200 mm Accuracy class: DIN 875/00 (Class 00) Tariff number: 90178090 Special features Material: stainless steel, matt chrome-plated, hardened measuring edge Feature: fixed stop for repeatable positioning Standard: DIN 875/00 FAQ What level of accuracy does this square provide? The hairline square meets DIN 875/00, Class 00, so the instrument delivers very fine angular accuracy suitable for precise workshop and inspection tasks. Is the square suitable for use in production environments? Yes, the stainless steel construction with a hardened measuring edge ensures durability and corrosion resistance, making the square appropriate for daily use in machining and assembly areas. How does the hairline improve measurement? The hairline serves as an optical reference for scribing and alignment; it allows precise visual positioning against datum edges and reduces reading uncertainty during layout work. Can this square be used for repetitive scribing operations? The built-in fixed stop provides a repeatable datum, which speeds up repetitive marking and helps maintain consistent part geometry during series work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200 mm Stop Angle With Stop, DIN 875/1 Normal Steel - Metav IndustryLine
Take advantage of a robust DIN 875/1 squaring standard combined with a compact 300 x 200 mm footprint and an integrated stop for repeatable positioning. Order the angle stop square directly via Metav Werkzeuge or consult our specialists for application advice. Angle stop square M214.358 – 300 x 200 mm, DIN 875/1 (Metav IndustryLine) The Angle stop square M214.358 is a precision-engineered angle gauge for workshop layout, inspection and assembly tasks, designed to deliver reliable squaring and repeatable positioning in production and quality environments. DIN 875/1 tolerance for accurate squaring Robust carbon steel construction Integrated stop for repeatable positioning Suitable for workshop and inspection use Consistent squaring accuracy for quality control Built to the DIN 875/1 tolerance class, this angle gauge provides a verifiable basis for squaring operations in inspection and assembly. The standard ensures that right-angles conform to an industry-recognised error band, supporting reproducible setups and dimensional checks. With its 300 x 200 mm datum surfaces, the tool offers a balance between reach and stiffness, reducing the influence of flexing during clamping and handling. This results in less rework and more predictable production outcomes when used as a reference during part inspection or jig alignment. Durable construction with practical positioning aid Manufactured from carbon steel, the square withstands routine workshop use while maintaining flat reference faces for measurement and marking. The integrated stop simplifies repetitive tasks: components can be indexed to the same position without additional fixtures, saving process time and lowering the chance of positioning error. The solid construction and precise mating faces provide a dependable reference for layout work, assembly checks and machine setup, where a secure physical datum is essential for efficiency. Streamlined inspection and assembly workflows Using a standardised angle gauge reduces setup variation between operators and stations. The tool supports quick go/no-go checks and serves as a stable edge for scribing or verifying part geometry. Its compatibility with established inspection routines means documented procedures can reference the square directly, simplifying quality documentation and audit trails. The listed GTIN and model details ensure traceability within procurement and inventory systems, aiding parts management and long-term quality control. A dependable supply chain for everyday precision Sourced from the Metav IndustryLine range, the product benefits from Metav’s logistics and quality assurance practices. For workshops and small production units seeking reliable measurement tools, the combination of a recognised standard, robust material choice and an integrated stop delivers operational advantages without unnecessary complexity. Metav’s experience in supplying metrology equipment supports consistent availability and straightforward integration into existing tool sets. For reliable squaring in inspection and assembly, request the Metav IndustryLine angle stop square M214.358 from Metav Werkzeuge for specification support and purchasing at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M214.358 GTIN: 4054469108384 EClass: 21170119 Customs tariff number: 90178090 Facts Dimensions: 300 x 200 mm Standard: DIN 875/1 Special features Carbon steel construction Integrated stop for repeatable positioning Category: Angle / square for workshop and inspection FAQ What accuracy standard does the angle square meet? The angle square meets the DIN 875/1 tolerance class, providing a verifiable squaring standard suitable for inspection and workshop use. Is the material suitable for regular workshop handling? Yes, the unit is made from carbon steel and is designed for routine handling, offering durable reference faces for marking and inspection operations. How does the integrated stop improve workflow? The integrated stop enables repeatable positioning of workpieces, reducing setup time and minimising positioning variance during serial checks or assembly tasks. Can this tool be used as a reference for machine setup? The square is suitable as a physical datum for machine setup and jig alignment, helping to establish consistent right-angle references across processes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200mm 45° Precision Bevel Square With Stop, Normal Steel, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of DIN 875/2 accuracy, robust mild steel construction and an integrated stop for reliable, repeatable 45° checks; order the square via Metav Werkzeuge or consult our specialists for application advice. 45° Bevel Square M214.439 — 300 x 200 mm, integrated stop (Metav IndustryLine) The 45° Bevel Square M214.439 is a precision workshop square designed for setting and verifying 45° angles in assembly, jig work and inspection tasks across general engineering and metalworking. Precision to DIN 875/2 standard Robust mild steel construction Integrated stop for repeatable measurements Size 300 x 200 mm for workshop use Reliable 45° alignment that reduces rework The square is manufactured to DIN 875/2, which defines the tolerances appropriate for workshop and inspection use. This level of standardisation ensures that angle checks and layouts can be performed consistently, reducing the need for corrective rework and speeding throughput. The combination of a rigid edge and standardised tolerance means the tool serves both setting tasks and quality-control comparisons with a measurable benefit to process reliability. Durable construction for everyday workshop demands Made from mild steel, the instrument balances stiffness and resilience for routine use on benches and in fixture construction. The material choice provides a stable reference surface that resists deformation under normal handling. Surfaces are prepared to give a distinct contact line while remaining suitable for light maintenance; the construction supports long service life in production environments without introducing excessive weight. Integrated stop for efficient, repeatable operations The fitted stop is intended for repeatable work steps where the same 45° orientation must be reproduced across multiple components. By fixing a mechanical datum, the stop minimises set-up time and variation between parts, translating into faster batch work and fewer measurement cycles. This feature supports leaner workflows where reproducible alignment is a priority rather than bespoke single-part adjustment. Practical identification and compatibility The tool is supplied for workshop use in a standard format of 300 x 200 mm, making it a practical reference for fixtures, small assemblies and bench checks. Identifiers for procurement and inventory are provided as SKU M214.439, facilitating traceability within stores and inspection logs. The compact footprint and proven geometry make the square suitable for use alongside other inspection equipment in general mechanical workshops. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine 45° Bevel Square M214.439 into existing inspection routines or to request a formal quotation and delivery options Technical data Article number: M214.439 GTIN: 4054469108797 Manufacturer: Metav IndustryLine Facts Dimensions: 300 x 200 mm Standard: DIN 875/2 Tariff number: 90178090 Special features Material: mild steel Feature: integrated stop for repeat measurements Application: angle setting and inspection Category: angle square FAQ What tolerance class does this square comply with? The square is produced to DIN 875/2, which defines workshop-level tolerances suitable for routine inspection and layout tasks. Is the stop suitable for batch alignment work? Yes, the integrated stop is intended to provide a fixed datum for repeatable 45° positioning in serial assembly and fixture set-up. Which materials is the tool made from and how does that affect use? Manufactured from mild steel, the square offers a balance of stiffness and durability appropriate for general engineering benches and light production environments. How can the square be identified in inventory systems? The product is listed under SKU M214.439 and GTIN 4054469108797 for procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x300x50 mm Granite Square 90° Angle Block, Four-Side Ground, DIN 876/0 & DIN 875/0 - Metav IndustryLine
Combine the corrosion‑resistant granite construction with Grade 0 squareness and a stable 300 x 300 x 50 mm working face to secure reproducible right‑angle references and reduced setup times. Order the 90° granite angle plate directly via Metav Werkzeuge or consult our specialists for application guidance and availability. M214.613 — 90° granite angle plate (300 x 300 x 50 mm, Grade 0) by Metav IndustryLine A 90° granite angle plate designed as a precision right‑angle reference for inspection, fixture alignment and machine set‑up in metrology and workshop environments. Precision Grade 0 squareness to DIN 875/0 Surface finished to DIN 876/0 for flatness Corrosion‑ and acid‑resistant granite construction Four‑sided machined and ground for stable seating Engineered for repeatable right‑angle referencing The 90° granite angle plate is produced to Grade 0 tolerances so that right‑angle measurements and fixture set‑ups are immediately reproducible. Compliance with DIN 875/0 for squareness and DIN 876/0 for surface flatness ensures that the plate functions as a dependable planar reference, shortening alignment cycles and lowering the risk of rework. These measurable standards support predictable process control and make the component suitable for quality checks, bench inspections and precision assembly tasks. Low‑maintenance granite construction for stable measurements Made from granite, the block combines natural thermal stability with a corrosion‑resistant and acid‑resistant surface that withstands typical workshop environments. The four‑sided machined and ground finishing provides consistent contact surfaces and reduces wear compared with softer materials; this keeps reference geometry intact over repeated use. The resilient surface simplifies routine upkeep: gentle cleaning preserves the reference faces and helps maintain long‑term measurement accuracy with minimal intervention. Practical dimensions and handling for everyday metrology With a nominal working area of 300 x 300 x 50 mm and a mass of 18 kg, the plate strikes a balance between reach and rigidity, enabling secure clamping and reduced deflection during checks. The square form gives multiple stable faces for fixturing and orientation checks, speeding setup and inspection workflows. Where repeatable alignment across fixtures or measuring benches is required, the block acts as a reliable baseline for traceable measurements and repeatable assembly procedures. For personalised advice on integrating this Metav IndustryLine granite angle plate (M214.613) into existing inspection routines, contact Metav Werkzeuge in Emmerich—specialists will advise on suitability, delivery and handling recommendations. Technical data Article number: M214.613 GTIN: 4054469183770 Dimensions: 300 x 300 x 50 mm Weight: 18 kg Material: Granite, corrosion‑resistant and acid‑resistant Facts Working face: 300 x 300 x 50 mm Mass: 18 kg Grade: 0 Surface standard: DIN 876/0 Squareness standard: DIN 875/0 Special features Four‑sided machined and ground Quadratic form for stable seating Suitable for inspection, fixture alignment and set‑up FAQ What level of squareness does the plate provide? The M214.613 90° granite angle plate (Metav IndustryLine) is manufactured to Grade 0 and meets the squareness requirements of DIN 875/0, offering a high level of right‑angle accuracy suitable for precision inspection and alignment tasks. Is the surface flat enough for precision inspection use? Yes, the surface flatness is produced to DIN 876/0, so the plate’s faces provide a reliably flat reference for bench inspection, layout checks and fixture verification when using the M214.613. Can this angle plate be used in mildly corrosive environments? The plate is made from corrosion‑resistant and acid‑resistant granite, which increases resistance to typical workshop contaminants; nevertheless, routine cleaning and sensible storage will prolong the reference surface life. How should the granite plate be cleaned and maintained? Maintenance is straightforward: wipe with a soft, lint‑free cloth and a mild, non‑abrasive cleaner; avoid aggressive solvents or rough abrasives to preserve the ground faces of the M214.613. Which applications are most suitable for this granite block? Common uses include right‑angle references for inspection benches, alignment of jigs and fixtures, assembly set‑ups and comparative checks—tasks where a stable, reproducible planar reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300×200 mm Angle Plate With Stop, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
Take advantage of a hardened stainless-steel construction and conformity to DIN 875/1 to ensure reliable squaring and repeatable set-ups in the workshop; combine these features for consistent production quality and reduced rework. Order the part directly via Metav Werkzeuge or consult our technical team for application advice. Engineer's square M214.338 — 300×200 mm, hardened stainless steel (DIN 875/1) The Engineer's square M214.338 is a hardened stainless-steel angle gauge for precision squaring, layout and inspection with a built-in stop for repeatable positioning Engineer's square, DIN 875/1 standard Hardened stainless steel construction Built-in stop for repeatable setups Precise 300×200 mm working faces High squareness for fewer measurement doubts Manufactured to DIN 875/1, this angle gauge provides a stable reference that supports consistent right-angle checks during assembly and inspection. The hardened stainless-steel faces reduce wear and preserve the measuring edges, which keeps the tool within its intended tolerance range for longer. For workshops that depend on repeatable fixturing and fast first-pass inspection, a certified square like this one reduces the need for frequent rework and improves process reliability. Faster setups with repeatable positioning The integrated stop simplifies repetitive tasks by providing a positive datum for component positioning, so clamping and layout steps become more efficient. The 300×200 mm working faces strike a practical balance between reach and rigidity, making the gauge suitable for bench work as well as machine‑tool set-ups. Using a dedicated angle gauge with a fixed stop shortens preparation time and helps maintain a steady production flow in both small-batch and serial operations. Built to withstand the workshop environment Constructed from corrosion‑resistant stainless steel and given a hardened finish on the measuring faces, the square resists surface damage and oxidation in typical shop conditions. That durability translates into lower maintenance and longer service life, supporting sustainable procurement decisions by reducing replacement frequency. The robust build ensures the tool performs as a stable reference across repeated handling, cleaning and light-duty impacts. For DIN 875/1 conformity and hardened stainless-steel reliability, contact Metav Werkzeuge to discuss supply options or technical suitability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.338 GTIN: 4054469108223 Standard: DIN 875/1 Dimension: 300×200 mm Material: stainless steel, hardened Facts EClass: 21170119 Tariff number: 90178090 SKU: M214.338 Special features With stop for repeatable setups Hardened measuring faces Corrosion‑resistant stainless steel (INOX) FAQ What accuracy level does this square provide? The Engineer's square M214.338 is manufactured to DIN 875/1, which designates a high‑accuracy class suitable for reliable squaring and inspection tasks in metalworking and assembly. Is the surface resistant to workshop corrosion? Yes, the M214.338 is made from stainless steel with hardened measuring faces, offering corrosion resistance and wear protection for routine shop use. Can this gauge be used for machine set-up and jig alignment? The built-in stop and the 300×200 mm faces make the square well suited to machine‑tool set‑ups, jig alignment and repeatable layout operations in both small and medium workshops. What is included with delivery? The delivery includes the Engineer's square M214.338 as described; please refer to the technical data for the exact specification and GTIN. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Digital Angle Gauge Colour 1.5" Touchscreen Microcomputer, ISO 17025 Calibrated Wireless USB - Microtech Metrology
Take advantage of the combination of full‑circle measurement, high resolution (0.001°) and ISO 17025 calibration for reproducible angle control and simplified documentation; order the instrument directly via Metav Werkzeuge or contact our consultants for specification advice. Digital angle gauge by Microtech Metrology — 0–360° range, Colour 1.5″ touchscreen A Digital angle gauge designed for workshop inspection and machine setup, providing full‑circle measurement with wireless and USB data transfer for easy integration into quality workflows. 0–360° full‑circle measurement Colour 1.5″ touchscreen display Wireless + USB data output ISO 17025 calibrated with certificate Precision that reduces setup time and rework The gauge delivers 0–360° coverage with a high resolution of 0.001°, enabling fine adjustments that shorten machine setup and reduce scrap. The instrument's stated accuracy of ±5′ (5 arc minutes) means angle deviations are tightly controlled; in practice this level of precision supports repeatable alignment of fixtures, rotary tables and indexing heads. Because the display shows readings to three decimal places, operators can perform adjustments with confidence and document results for process control. Reliable data capture and traceability for quality systems Equipped with Wireless + USB connectivity, the device simplifies data capture for statistical process control and traceability. Measurement values can be logged directly to a PC or a wireless receiver, avoiding manual transcription errors and speeding reporting. The tool is delivered fully calibrated under ISO 17025, including a calibration certificate, which supports audit requirements and simplifies acceptance into laboratory or production quality systems. Ergonomic handling and precise adjustment for shop use The bright Colour 1.5″ touchscreen provides a clear, compact user interface that is easy to read in workshop lighting. A dedicated fine‑adjustment function allows controlled, smooth movement during alignment tasks, improving reproducibility of settings. The instrument's digital architecture combines compact ergonomics with robust measurement behaviour, making it suitable for on‑bench inspection as well as for use on assembly and machining fixtures. Built for inspection labs and production floors This device suits metrology benches, incoming inspection and machine setup stations where documented accuracy and connectivity matter. Microtech Metrology's instrument supports both immediate angle checks and integration into longer traceability chains; the combination of high resolution, digital output and accredited calibration makes it a practical choice for companies seeking to tighten tolerances and demonstrate compliance. Metav's distribution ensures a reliable European supply channel and access to expert advice on application and integration. Contact Metav Werkzeuge in Emmerich to request detailed specifications, confirm calibration options and secure the Microtech Metrology digital angle gauge with ISO 17025 certificate Technical data Article number: 151136055 GTIN: 4061905047879 Brand: Microtech Metrology Measurement range: 0–360° Resolution: 0.001° Accuracy: ±5′ (5 arc minutes) Display: Colour 1.5″ touchscreen Data output: Wireless + USB Fine adjustment: yes Calibration: ISO 17025 certificate included Facts Measurement range 0–360° Resolution 0.001° Accuracy ±5′ Display size 1.5″ Digital output Wireless and USB Features Digital instrument Colour touchscreen interface Fine adjustment control Delivered with ISO 17025 calibration certificate FAQ Is the instrument delivered calibrated? Yes. The Microtech Metrology digital angle gauge is supplied fully calibrated to ISO 17025 and includes the calibration certificate with delivery. What resolution and accuracy can be expected? The device offers a resolution of 0.001° and an accuracy of ±5′ (5 arc minutes), suitable for precise setup and inspection tasks. How are measurement values exported? Measurement data can be transferred via the instrument's Wireless connection or the USB interface for direct logging into data‑collection systems. Which applications are typical for this gauge? Common uses include machine tool alignment, fixture and jig verification, incoming inspection of components and angle checks on assembly lines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400 mm Angle Clamp Galvanised Mild Steel With Wing Nut - Metav IndustryLine
Benefit from the combination of galvanised mild-steel construction, a practical wing nut for fast hand tightening and a 400 mm rail length that fits medium-sized assemblies — designed for dependable workshop use. Order the angle bracket directly via Metav Werkzeuge or ask our consultants for application advice. Angle bracket M214.945 — 400 mm, galvanised mild steel (Metav IndustryLine) The Angle bracket M214.945 is a 400 mm setting bracket for secure, adjustable mounting and fixturing in general workshop and assembly applications Galvanised mild-steel construction 400 mm rail length for medium assemblies Wing nut for rapid hand tightening Robust design for workshop use Durable, low-maintenance construction for reliable mounting The bracket is made from mild steel with a galvanised finish, offering a corrosion‑resistant surface that reduces the need for frequent maintenance. This solid material choice delivers mechanical stability and withstands routine workshop stresses, helping to keep jigs and fixtures aligned over repeated use. The protective coating slows atmospheric wear, which contributes to predictable service life and fewer unscheduled interventions in production environments. Fast clamping and simpler assembly workflows An integrated wing nut provides direct, tool-free clamping so assemblies can be adjusted and secured quickly. This reduces cycle time during set-up and repeated dismantling, supporting higher throughput and fewer alignment delays. The manual tightening concept keeps operations straightforward and safe: operators can achieve consistent clamping without specialised torque tools, which is particularly useful for repetitive fixture changes or temporary mounting tasks in maintenance and prototyping. The right reach for medium-sized tasks with dependable stiffness With a 400 mm rail length, the bracket sits in the practical mid‑range for many workshop duties, offering a useful balance between reach and rigidity. The length is suited to medium components and subassemblies where reach is required but excessive flex would compromise accuracy. The dimensional choice supports common mounting scenarios in fabrication, small-scale assembly and equipment fitting, making the component a versatile addition to a standard tooling set. Purchase the Metav IndustryLine angle bracket through Metav Werkzeuge for dependable supply and workshop compatibility — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for further specification assistance Technical data Article number: M214.945 Brand: Metav IndustryLine Material: mild steel Surface: galvanised Fastening: wing nut Facts Rail length: 400 mm Special features Galvanised finish for corrosion resistance Wing nut for quick hand tightening Designed for workshop and assembly applications FAQ What material is the angle bracket made from? The angle bracket M214.945 is manufactured from mild steel and finished with a galvanised coating for enhanced corrosion resistance. Does the product include a fastening element? Yes, the bracket is supplied with a wing nut that allows for rapid manual clamping and straightforward adjustment. What applications suit the 400 mm length? The 400 mm rail length is intended for medium‑sized assemblies, general fixturing and workshop mounting tasks where a balance of reach and stiffness is required. Is the finish suitable for outdoor use? The galvanised surface improves resistance to atmospheric corrosion; for prolonged outdoor exposure or aggressive environments, additional protective measures should be considered. How is the bracket identified for ordering? Order using SKU M214.945 (Metav IndustryLine) to ensure the correct 400 mm galvanised angle bracket is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 230 mm Flat Galvanised Fabricator's Square, Flat - Metav IndustryLine
Robust zinc‑plated special steel construction and a precise 400 x 230 mm geometry provide reliable right‑angle control and durable performance for routine workshop alignment tasks. The flat profile and low weight enable easy handling and storage. Order the engineer's square, 400 x 230 mm, flat zinc‑plated directly via Metav Werkzeuge or ask our consultants if needed. Engineer's square, 400 x 230 mm, flat zinc‑plated — Metav IndustryLine The engineer's square, 400 x 230 mm, flat zinc‑plated is a flat, zinc‑finished machinist's square designed for marking, alignment and checking right angles in metalworking and general workshop environments. Flat zinc‑plated finish for corrosion resistance Special steel construction for stability 400 x 230 mm geometry for common workshop tasks Lightweight 0.7 kg for easy handling Trusted squareness for everyday measurements A precise right angle is the foundation of many workshop operations. The M214.508 model delivers a consistent 90° geometry through a robust, flat blade and stock arrangement. Crafted from special steel and finished zinc‑plated, the tool maintains alignment over repeated use while minimising fretting and surface wear. The 400 x 230 mm footprint is large enough for most bench projects yet compact enough for handheld checks, providing a dependable balance between reach and manoeuvrability. Practical design that speeds routine work The flat profile and modest mass translate into reduced fatigue during repetitive marking or checking. With an overall weight of 0.7 kg, this square is easy to lift, position and clamp without obstructing the line of sight or the scribing process. The simple geometry supports fast, repeatable set‑ups: align the stock against an edge, run the blade along the workpiece and mark or measure. The result is fewer alignment errors and a smoother workflow on daily production and repair tasks. Corrosion resistance and low maintenance The zinc‑plated finish affords basic protection against workshop humidity and mild contamination, delaying the onset of surface rust compared with bare steel. The flat design reduces crevices where debris can accumulate, making cleaning straightforward with a dry cloth or light oil. Manufactured to a workshop standard, the square is suitable for standard shop environments and requires only routine inspection to retain reliable performance. Stable, resilient construction for long service life The selection of special steel and the compact geometry combine to deliver structural stiffness where it matters most: at the junction between stock and blade. That stiffness supports repeatable squareness during scribing, layout and inspection operations. The straightforward construction also simplifies storage; lay the tool flat in a drawer or hang it on a rack to keep edges protected and ready for the next task. For supply from Metav Werkzeuge in Emmerich and tailored advice on the Metav IndustryLine engineer's square (M214.508), contact +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.508 GTIN: 4054469108957 Eclass: 21170129 Facts Dimensions: 400 x 230 mm Weight: 0.7 kg Tariff number: 90178090 Special features Material: Special steel, zinc‑plated Finish: Flat Norm: Workshop standard FAQ What applications suit this type of square? This engineer's square (M214.508) is intended for marking, alignment and right‑angle checks in metalworking, fabrication and general workshop tasks. What is the material and protective finish? The square is made from special steel and is zinc‑plated to provide basic corrosion resistance while keeping the surface easy to clean. How portable is the tool for everyday use? At approximately 0.7 kg and with a flat profile, the square is lightweight and simple to handle for frequent marking and inspection jobs. Does the product meet any workshop standards? The tool is manufactured to a workshop standard to ensure consistent geometry and robust behaviour in typical shop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 265 mm Angle Square Flat, DIN 875/1, Carbon Steel - Metav IndustryLine
Take advantage of a robust reference tool that combines DIN 875/1 angle accuracy, flat ground faces and a practical 400 × 265 mm size for reliable alignment and inspection tasks; order the inspection square directly via Metav Werkzeuge or consult our specialists if guidance is required. Inspection square 400 × 265 mm (DIN 875/1) — Metav IndustryLine, standard steel The Inspection square 400 × 265 mm is a precision reference square intended for workshop inspection and setup tasks, offering DIN 875/1 accuracy for dependable right-angle checks in metalworking and quality control DIN 875/1 accuracy class Flat ground reference faces Dimensions 400 × 265 mm Reduce setup time with certified angle accuracy The square is manufactured to DIN 875/1, which guarantees a defined level of angular precision suitable for general industrial inspection. As a verified reference tool, this specification means the component can be used to check and align jigs, fixtures and machine set-ups with consistent results, reducing iteration and rework. The combination of a defined standard and a compact footprint makes the instrument an efficient choice where reproducible right-angle checks are required. Durable construction for everyday workshop use Made from standard steel with flat ground faces, the unit is engineered to withstand routine handling and provide long-term stability. The flat ground reference surfaces ensure intimate contact with workpieces and minimise rocking that could introduce error. At approximately 2.5 kg, the square provides the mass needed to sit steadily during inspection without being cumbersome to position by a single operator, supporting faster, more reliable measurements in daily production tasks. Integrates cleanly into quality workflows Identification details such as the SKU and GTIN support traceability within a quality-management system: the item is listed as M214.349 with GTIN 4054469108315. The clear standard reference and robust construction mean the square can serve as a shop-floor reference for visual and dimensional checks, helping to maintain conformity across batches. For workshops seeking a dependable reference square that balances practicality and metrology standards, this solution supports systematic quality checks without excessive complexity. For a verified DIN 875/1 reference square from Metav IndustryLine, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request technical guidance Technical data Article number: M214.349 GTIN: 4054469108315 Material: Standard steel Standard: DIN 875/1 Dimensions: 400 × 265 mm Weight: 2.5 kg Customs tariff number: 90178090 eClass: 21170119 Facts Dimensions: 400 × 265 mm Weight: 2.5 kg GTIN: 4054469108315 Article number: M214.349 Customs tariff number: 90178090 Special features Flat ground faces (flat) Standard steel construction Conforms to DIN 875/1 Category: Inspection square FAQ What level of angular accuracy does the square provide? The inspection square meets DIN 875/1, which specifies the tolerance class for right-angle reference squares and ensures suitability for standard workshop inspection tasks. Is the square suitable for routine machine set-up and jig checking? Yes, the Metav IndustryLine inspection square M214.349 is designed for workshop use, offering flat reference faces and a stable form factor for regular alignment and set-up checks. What material is used for the inspection square and how does that affect durability? Constructed from standard steel, the square offers robust durability for daily handling while its ground faces maintain measurement fidelity over time. How can the part be tracked within a quality system? The item is listed as M214.349 with GTIN 4054469108315, which allows straightforward traceability and inventory control in quality-management workflows. Is this square suitable as a shop-floor reference for routine inspections? Yes, the combination of DIN 875/1 conformity and flat ground faces makes this inspection square appropriate as a shop-floor reference for consistent visual and dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 400 mm Flange Square Galvanised Without Packaging - Metav IndustryLine
The galvanised 400 × 400 mm flange angle combines robust special steel construction, precise flatness and a compact, lightweight form for fast alignment and fixture support. Benefit from durable corrosion resistance and straightforward handling to keep assembly and maintenance processes efficient. Order the flange angle directly via Metav Werkzeuge or consult the Metav team for specification advice. Flange angle 400 x 400 mm — galvanised special steel, workshop grade (Metav IndustryLine) A Flange angle 400 x 400 mm designed for aligning and supporting flanges, fixtures and small assemblies in fabrication and maintenance environments. Galvanised special steel for corrosion protection Flat 400 × 400 mm dimension for standard flanges For workshop and assembly alignment Lightweight: 1.3 kg for easy handling Faster alignment and fewer reworks on the production floor The square 400 × 400 mm format delivers a predictable datum for repetitive tasks, making the component suitable for jigs, temporary fixtures and flange alignment in metalworking and maintenance shops. The flatness of the face and the standardised external dimensions ensure consistent contact with mating parts, which reduces setup time and minimises corrective work. This results in a tangible improvement in process throughput where repeatable positioning is required. Practical handling that speeds up assembly work At just 1.3 kg, the angle offers a balance between stiffness and manoeuvrability, allowing single-person handling for many common tasks while maintaining the rigidity needed for short-span support. The compact, workshop-friendly format aids fast positioning and clamping; its lightweight nature reduces operator fatigue during repeated use. For maintenance teams and fabricators, this means quicker cycles and less time spent adjusting temporary supports. Corrosion protection and long service life explained Finished in a galvanised coating, the flange angle is protected against surface corrosion in typical workshop and indoor environments. The combination of galvanisation and special steel base material increases resistance to oxidation compared with bare steel, which extends the part’s service life and lowers replacement frequency. The galvanised finish also supports reliable clamping and repeatable measurements, preserving contact quality between the angle and the workpiece. Built to fit standard workshop practices Produced to a factory standard, the component is compatible with common clamping accessories and fixturing approaches. The simple geometry eases integration into existing assemblies or temporary fixtures and suits applications where a reliable, low-maintenance support element is required. The robust material choice and corrosion protection position the part as a practical, durable option for everyday industrial use. Contact Metav Werkzeuge for stock availability and application guidance on the Metav IndustryLine galvanised flange angle Technical data SKU: M214.541 GTIN: 4054469109138 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 400 mm Weight: 1.3 kg Material: Special steel, galvanised Standard: Werksnorm Customs tariff number: 90178090 Special features Workshop-grade galvanised finish Suitable for fixture and flange alignment Compact, lightweight design for easy handling FAQ Is the galvanised surface suitable for outdoor use? The galvanised finish provides enhanced corrosion resistance for typical workshop and sheltered outdoor conditions, but prolonged exposure to aggressive environments may require additional protection or checks. Can this angle be used for welding fixtures and tack-ups? Yes, the robust special steel construction is suitable for use in welding jigs and temporary fixtures; the galvanised coating should be considered if welding operations will come into direct contact with the coated surfaces. Does the component come with packaging? The product is supplied without packaging as specified on the label; this supports immediate deployment in the workshop and reduces packaging waste. What is the intended application area for this flange angle? The angle is intended for alignment, support and temporary fixturing in metalworking, fabrication and maintenance settings where a compact, corrosion-resistant support is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200 mm Angle Stop With Stop Feature, DIN 875/2 - Metav IndustryLine
Take advantage of a robust, standards‑compliant design combined with stable handling and clear packaging for reliable right‑angle checks in the workshop. Order the Precision Engineer's Square directly via Metav Werkzeuge or consult our specialists for application advice. Precision Engineer's Square M214.578 – 400 x 200 mm, DIN 875/2 (Metav IndustryLine) The Precision Engineer's Square M214.578 serves as a DIN‑classified reference for accurate 90° alignment and setup tasks in mechanical workshops and quality control environments. DIN 875/2 class for high angular accuracy 400 x 200 mm measuring faces for stable support Made from mild steel for long service life Supplied with stop in cardboard box Accurate angle reference for production and inspection The square is built to provide a dependable right‑angle reference in routine inspection and machine set‑up work. Conformance with DIN 875/2 indicates that the tool meets recognised workshop standards for angular integrity, so checks and alignments are based on a repeatable physical reference rather than estimation. Using a standardised reference reduces rework and supports process stability in both small‑batch fabrication and serial manufacturing, delivering a clear efficiency advantage when angle control is part of the quality chain. Robust construction that reduces measurement uncertainty Manufactured from mild steel, the unit combines mass and rigidity to minimise deflection during contact and to keep the faces stable under light clamping or positioning forces. The nominal dimensions 400 x 200 mm strike a useful balance between reach and stiffness: broad measuring faces give a secure seating on workpieces while remaining compact enough for bench use. The integrated stop simplifies repetitive positioning tasks and contributes to consistent placing of components, which in turn lowers scatter in subsequent inspection data. Practical handling and workshop integration The measuring faces of this reference tool are ground to provide a flat, continuous contact area that supports typical layout, inspection and fixture tasks. At around 3.2 kg, the tool is heavy enough to stay put during normal use yet readily manoeuvrable for operator handling and storage. Supplied in a protective cardboard box, the square arrives ready for immediate use or for safe filing between operations. The solid, no‑nonsense design suits everyday workshop environments and complements inspection benches, milling setups and assembly jigs where a reliable right angle is required. Choose the Metav IndustryLine reference square for secure, standards‑based angle control — contact Metav Werkzeuge for supply and expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.578 GTIN: 4054469109305 Weight: 3.2 kg Dimensions: 400 x 200 mm Standard: DIN 875/2 Tariff number: 90178090 Facts Measuring faces: 400 x 200 mm Mass: 3.2 kg Boxed packaging: cardboard box Material: mild steel Special features With stop Ground measuring faces for stable contact Metav IndustryLine product Suitable for workshop inspection and setup tasks FAQ What level of angular accuracy does this square provide? The Precision Engineer's Square M214.578 is manufactured to DIN 875/2, providing a recognised level of angular integrity suitable for workshop inspection and alignment tasks. Is the square supplied ready for use or does it require preparation? The Metav IndustryLine reference square is delivered in a cardboard box and ready for immediate use on benches or in fixtures; no additional preparation is required. Which materials is the square suitable for checking and aligning? The square's mild steel construction and ground faces make it appropriate for alignment and inspection of common metal components, jigs and fixtures in machining and assembly contexts. Can the stop be used for repetitive positioning during measurement tasks? Yes, the integrated stop facilitates repeatable positioning and helps reduce variability when performing successive right‑angle checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200 mm Inspection Square Flat Stainless Hardened, DIN 875/2, Cardboard Box - Metav IndustryLine
Combine DIN 875/2 accuracy with a hardened stainless-steel construction and a flat profile to secure reproducible right-angle checks on the shop floor; order the inspection square directly via Metav Werkzeuge or request specialist advice if required. Inspection square 400 x 200 mm, DIN 875/2 — Hardened stainless-steel control square (Metav IndustryLine) The Inspection square 400 x 200 mm is a hardened stainless-steel control square designed for precise 90° verification in workshop inspection, assembly and quality‑control processes. Hardened stainless-steel construction DIN 875/2 accuracy class Flat profile for straightforward alignment Supplied in cardboard box Precision that supports decision‑making The inspection square meets DIN 875/2, a recognised tolerance class for control squares, which makes it suitable for routine verification tasks where dependable geometry is required. Thanks to the standardised tolerance, measurements performed with this tool provide a clear, comparable basis for go/no‑go decisions during incoming inspection or assembly checks. The calibrated geometry enables consistent right‑angle assessment and reduces uncertainty in alignment tasks. Robust construction for daily workshop use Manufactured from hardened stainless steel, the tool resists wear and maintains its reference surfaces over repeated use. The flat profile reduces contact play when aligning components and aids visual confirmation against reference edges. The solid build delivers mechanical stability during handling and minimises the risk of distortion under normal workshop stresses, supporting consistent results across multiple shifts. Practical handling and protective packaging At 400 x 200 mm, the format balances reach and manoeuvrability: long enough to span typical fixtures yet compact enough for single‑operator alignment work. Supplied in a cardboard box, the instrument arrives protected for storage and transport while remaining easy to access for frequent use. The combination of size and packaging makes the square a convenient tool for bench checks, machine set‑ups and inspection stations. Reliability from a specialist supplier As part of the Metav IndustryLine range, this control square benefits from the distributor’s emphasis on accessible precision and dependable supply. Metav’s product selection and logistics underpin a straightforward procurement path for workshops and small‑series manufacturers; the company’s market presence supports repeatable availability and consistent product quality. Choosing this tool supports long‑term routine control processes and contributes to measurable quality assurance. Select the Metav IndustryLine inspection square for repeatable right‑angle checks — order from Metav Werkzeuge in Emmerich or request technical advice by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.369 GTIN: 4054469108476 Weight: 2.5 kg Material: stainless steel, hardened Standard: DIN 875/2 Dimensions & measurable data Size: 400 x 200 mm Profile: flat Net weight: 2.5 kg Special features Supplied in cardboard box Flat profile for alignment Hardened stainless-steel construction FAQ What tolerance class does the inspection square conform to? The inspection square conforms to DIN 875/2, providing a standardised tolerance suitable for routine workshop and inspection tasks. Is the tool suitable for regular shop‑floor use? Yes; the hardened stainless‑steel construction and flat profile make the Metav IndustryLine control square robust enough for frequent checks and alignment work. What are the working dimensions and how do they affect handling? The tool measures 400 x 200 mm, a format that offers a balance between reach and manoeuvrability for typical assembly and inspection operations. How is the inspection square delivered? The instrument is supplied in a cardboard box, ensuring protection in transit and simple storage ready for immediate use. Is the material corrosion‑resistant? The square is made from stainless steel and is hardened for wear resistance, offering good corrosion performance in standard workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200 mm Inspection Square Flat, DIN 875/2, Cardboard Box - Metav IndustryLine
Take advantage of the combination of DIN 875/2 conformity, robust carbon steel construction and a compact, transport-safe design for repeatable right-angle checks in the workshop. Order the inspection square directly via Metav Werkzeuge or ask the consultants for application advice. Inspection square M214.558 — 400 x 200 mm, DIN 875/2 (Metav IndustryLine) A Inspection square M214.558 engineered as a right-angle reference for workshop inspection, setup and quality control tasks DIN 875/2 accuracy class Size: 400 x 200 mm working faces Robust carbon steel construction Supplied in protective cardboard box Precision that keeps production aligned The control geometry follows DIN 875/2, providing a reliable right-angle reference for incoming inspections, machine set-up and jig verification. The defined tolerance class ensures measurements are comparable across shifts and tools, reducing rework and downtime. With clear conformity to the standard and a stable measuring face, this instrument supports consistent decision-making in small-batch production and routine quality control, delivering measurable efficiency gains. Durable construction for everyday workshop use Manufactured from carbon steel and finished for a flat measuring surface, the gauge combines mass and stiffness to resist deformation under handling. The substantial mass (approx. 2.5 kg) helps stabilise the tool during contact checks, while the machined faces preserve squareness over repeated use. The robust build reduces the need for frequent replacement and keeps calibration intervals practical for typical workshop cycles, translating into lower lifetime maintenance effort. Practical handling and storage that speeds workflows At 400 x 200 mm the format balances reach and manoeuvrability: large enough for most assemblies yet compact for benchtop checks and tight set-ups. The inspection square is supplied in a protective cardboard box, simplifying secure transport between workstations and preventing face damage during storage. Delivered as a ready-to-use right-angle control, it integrates into routine inspection stations and layout benches with minimal adaptation while carrying the quality assurance expected from the Metav IndustryLine range. For robust and standard-compliant right-angle inspection choose the Metav IndustryLine M214.558 and contact Metav Werkzeuge GmbH in Emmerich for specialist advice and purchase enquiries via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.558 GTIN: 4054469109220 Category path: Winkel (Angle gauges) Tariff code: 90178090 Image size (px): 400x265 Facts Weight: 2.5 kg Measuring faces: 400 x 200 mm Standard: DIN 875/2 Special features Material: Normalstahl (carbon steel) Flat design Supplied in cardboard box Compact format for workshop use FAQ What tolerance class does this square meet? The inspection square M214.558 conforms to DIN 875/2, providing the accuracy class required for routine workshop right-angle verification. Which tasks is the square suitable for? The control square is intended for right-angle checks during machine set-up, component inspection and jig alignment where a 400 x 200 mm working face is appropriate. Is the square ready for immediate use on arrival? Yes, the M214.558 is supplied ready for inspection tasks and packed in a protective cardboard box for safe transport and storage. How should the square be cared for to preserve accuracy? Keep the measuring faces clean and dry, avoid impact or dropping, and store the square in its box when not in use; periodic inspection of the faces will help maintain squareness. Can the square be used as a reference for fixture construction? Its flat, machined faces and DIN 875/2 conformity make the square suitable as a workshop reference during the construction and checking of fixtures and small assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200mm Angle Stop Square With Stop, Hardened Stainless Steel, DIN 875/2 - Metav IndustryLine
Robust, DIN‑compliant and built for repeatability: the hardened stainless steel construction and integrated stop ensure consistent squaring and secure fixture positioning in the workshop; order directly via Metav Werkzeuge or consult their specialists for delivery and technical advice. Precision angle square M214.379 – 400 × 200 mm, hardened stainless steel (DIN 875/2) | Metav IndustryLine The Precision angle square M214.379 is a hardened stainless steel engineer's square designed as a fixed stop and reference for workshop layout, inspection and machine setup tasks. Hardened stainless steel construction Precision to DIN 875/2 standard Integrated stop for repeatable positioning Precision where repeatability matters The device is designed to deliver precision in routine layout and inspection work. Manufactured from hardened stainless steel, the body resists wear on the measuring faces so that squareness is preserved through repeated use. Conformity to DIN 875/2 signals that the square meets recognised workshop accuracy criteria, providing a reliable datum for alignment tasks and right‑angle checks. This reliability reduces rework and supports consistent production tolerances, making setup and inspection steps faster and more predictable. Durability that withstands workshop demands Built-for-purpose material selection ensures corrosion resistance and longevity in demanding environments. The substantial construction (weight serves to stabilise the tool) and hardened surfaces give a measured feel when used as a stop or reference, while the integrated stop enables secure, repeatable positioning of workpieces or jigs. Supplied in a protective cardboard box for safe transport, the design is intended to keep the instrument serviceable with minimal maintenance, lowering total cost of ownership through fewer replacements and less downtime. Practical use, clear benefits for machinists As a dedicated squaring and stop tool, this angle square simplifies fixture alignment and layout operations in both production and maintenance contexts. The flat, hardened faces permit quick verification of right angles on parts and assemblies, aiding setup for milling, drilling and assembly processes. Traceable conformity and robust workmanship foster measurement confidence during inspection routines, while the compact footprint supports manoeuvrability at the bench. For workshops seeking a durable reference square that combines ease of use with industrial standards, this instrument is a practical choice. Enquire with Metav Werkzeuge for procurement or technical details on the M214.379 — Metav's sales team in Emmerich can advise on delivery, compatibility with workshop processes and supply logistics (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: M214.379 GTIN: 4054469108551 Manufacturer: Metav IndustryLine Material: hardened stainless steel Standard: DIN 875/2 Weight: 3.2 kg Facts Measuring faces / reference size: 400 × 200 mm Tariff number: 90178090 Special features Integrated stop for positioning Hardened measuring faces Supplied in cardboard box Category: Angle / square for workshop use FAQ What level of accuracy does this angle square provide? The angle square M214.379 conforms to DIN 875/2, which classifies its squareness and is suitable for workshop and inspection tasks requiring reliable right‑angle references. Is the instrument suitable for use in humid or corrosive workshop environments? Yes. The M214.379 is manufactured from hardened stainless steel, offering enhanced corrosion resistance for typical workshop conditions. What is the purpose of the integrated stop? The integrated stop on the M214.379 provides repeatable positioning for fixtures and workpieces, enabling consistent alignment and faster setup during production or inspection. How is the product supplied for transport and storage? The angle square is delivered in a cardboard box to protect the tool during transport; this packaging helps prevent damage to the hardened faces before first use. Can this square be used for both layout and machine setup? Absolutely. The combination of stable construction and DIN 875/2 conformity makes the M214.379 suitable for layout work, machine setup, and routine inspection tasks in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x230 mm Locksmith Square With Stop, Galvanised Special Steel Werksnorm - Metav IndustryLine
Take advantage of a galvanised, special‑steel construction combined with an integrated stop and workshop‑grade flatness for reliable layout work; order the square directly via Metav Werkzeuge or consult our technical team for application advice. Engineer's square M214.528 — 400 × 230 mm, galvanised stop (Metav IndustryLine) The Engineer's square M214.528 is a robust measuring square for general workshop layout and simple alignment tasks, combining a 400 × 230 mm face with a galvanised stop for repeatable positioning. Galvanised special-steel construction Integrated stop for repeatable positioning Precision-ground faces for accurate layout Compact 400×230 format for general use Accurate, workshop-ready geometry for reliable layout The 400 × 230 mm format delivers a practical balance between reach and stiffness, making this angle gauge ideal for everyday metalworking and maintenance tasks. The precision-ground faces ensure consistent squareness during marking and striking operations, reducing rework and setup time. Built from special steel with a galvanised finish, the instrument resists corrosion and keeps the measuring faces true even after heavy use, which supports steady production flow and fewer measurement interruptions. Durable construction that withstands daily handling A galvanised coating protects the square against shop contaminants while the robust core material provides stiffness where it matters: along the blade and stock junction. The integrated stop is designed for repeatable positioning, enabling quick, consistent transfers from fixture to fixture. This combination of durability and repeatability supports efficient processes in fabrication, assembly and quality‑control stations where tools must perform reliably under frequent handling. Practical features that save time during layout work A well‑designed workshop square reduces non‑value activities. The flat, ground faces and the stop allow rapid alignment and straightforward transfer of reference lines; fewer adjustments are needed before cutting or drilling. The weight of 1.1 kg gives a stable hand hold without being cumbersome, so single‑operator tasks remain manageable while maintaining accuracy. For shops seeking straightforward, measurable performance improvements, these tangible benefits translate into faster turnarounds and more consistent first‑pass quality. Trusted supply and application guidance for professional users Metav IndustryLine instruments are supplied with an emphasis on accessibility and reliability for industrial customers. The M214.528 sits within a product range curated to reduce supplier complexity and support repeatable workshop results. Technical guidance and clear specification data from the supplier in Emmerich help integrate the square into existing workflows, supporting confident purchasing decisions and long‑term dependability on the shop floor. For repeatable workshop measurements and reliable positioning, choose the Metav IndustryLine M214.528 — contact Metav Werkzeuge for technical consultation and supply from Emmerich on the Rhine. Technical data Article number: M214.528 GTIN: 4054469109060 Dimensions: 400 x 230 mm Weight: 1.1 kg Material: Special steel, galvanised Feature: with stop Standard: Werksnorm Tariff number: 90178090 Facts Width: 400 mm Height: 230 mm Weight: 1.1 kg Special features Galvanised finish Integrated stop for repeatable positioning Workshop measuring square FAQ What is the primary use of this measuring square? The M214.528 engineer's square is designed for layout, marking and simple alignment tasks in metalworking and general workshop environments. Is the square protected against corrosion? Yes — the Metav IndustryLine M214.528 has a galvanised finish on the special‑steel body to resist shop contaminants and extend service life. Does this model have a repeatable positioning feature? The integrated stop on the M214.528 enables repeatable positioning for consistent transfers and quicker setup between operations. What are the dimensions and weight of the square? The measuring square measures 400 × 230 mm and weighs 1.1 kg (SKU M214.528). Is this instrument suitable for precision inspection work? The square delivers workshop‑grade flatness and squareness for layout and assembly. For metrology lab‑level inspection, instruments with certified traceability and tighter tolerances should be considered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x250x40 mm Granite Square 90° Grade 0, DIN 875/0 - Metav IndustryLine
Take advantage of a grade 0 reference that combines granite stability and precision-ground faces for reproducible squaring and inspection. Benefit from DIN 875/0 conformity and a compact 400 x 250 x 40 mm footprint to simplify setup and reduce machine downtime. Order the item directly via Metav Werkzeuge or consult the team for application advice. Granite square 90° M214.607 — grade 0 reference, 400 x 250 x 40 mm (Metav IndustryLine) A Granite square 90° M214.607 designed as a stable right-angle reference for workshop inspection and squaring of machine parts and spindles. Grade 0 accuracy to DIN 875/0 High-stability granite construction Precision ground reference faces Compact 400 x 250 x 40 mm footprint Reliable right-angle reference for inspection and setup The combination of grade 0 tolerance and a stone body creates a repeatable datum for squaring operations. Conforming to DIN 875/0 ensures the reference faces meet stringent flatness and perpendicularity requirements, which translates into measurable reductions in setup variation and inspection scatter. Where traceable alignment and reproducible positioning matter, this type of reference minimises rework and supports efficient quality control procedures. Why granite delivers metrology-grade stability Granite is the material of choice for dimensional references because of its superior thermal stability and natural vibration damping. Compared with metallic standards, a granite body changes dimensionally far less with temperature swings commonly found in workshops and inspection rooms; this yields steadier readings over time. The faces are precision-ground to provide a wear-resistant contact surface that preserves accuracy through repeated use and gentle handling. Practical benefits for the workshop and inspection lab A compact footprint of 400 x 250 x 40 mm balances reach with manoeuvrability: large enough to support many workpieces yet small enough for routine handling and storage. The unit serves as a fixed right-angle reference during spindle squaring, component inspection and set-up verification. Robust construction and ground faces make it suitable for regular use on the shop floor and in metrology stations where clear, stable references speed throughput and increase confidence in measurement results. For precision squaring in production or the metrology lab, request the Metav IndustryLine granite square M214.607 from Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: M214.607 GTIN: 4054469109435 Material: Granite Dimensions: 400 x 250 x 40 mm Standard: DIN 875/0 ECLASS: 21170119 Tariff number: 68022300 Facts Footprint: 400 x 250 x 40 mm Grade: 0 SKU: M214.607 Special features Precision-ground reference faces High-stability granite construction Category: Angle / Square Intended use: Squaring, inspection, setup verification FAQ What accuracy and standard does the square meet? The granite square meets DIN 875/0 and is supplied as a grade 0 right-angle reference, ensuring high-flatness and perpendicularity suitable for demanding inspection tasks. Which material is used for the reference body? The body is made from granite, chosen for its thermal stability and vibration-damping properties that support consistent measurements. What are the external dimensions of the reference? The reference measures 400 x 250 x 40 mm, providing a compact yet practical footprint for workshop and lab use. Is the product suitable for squaring machine spindles and components? Yes — the design and precision-ground faces make the square appropriate for aligning and checking spindles, housings and machined parts. How is repeatability supported in routine use? Repeatability is achieved through the combination of a stable granite body, precision-ground faces and compliance with DIN 875/0, which together reduce variability during setup and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x265 mm Inspection Square Flat, Hardened Stainless Steel, DIN 875/1, Cardboard Box - Metav IndustryLine
Combining DIN-compliant accuracy with a hardened stainless-steel construction, this inspection square gives repeatable 90° checks for shop-floor and quality-control routines. The flat profile and protective cardboard packaging reduce handling marks and support reliable storage; order the inspection square directly via Metav Werkzeuge or consult our advisors for application guidance. Inspection square M214.329 — 400 x 265 mm, hardened stainless steel, DIN 875/1 (Metav IndustryLine) The Inspection square M214.329 is a hardened stainless-steel angle gauge designed for precise right-angle verification in workshops and inspection benches according to DIN 875/1 Hardened stainless-steel construction Certified to DIN 875/1 Flat profile for stable contact Supplied in protective cardboard box Consistent right-angle control for quality assurance The hardened stainless-steel blade and body, manufactured to DIN 875/1, provide a stable reference that resists wear and deformation under regular use. This results in consistent accuracy across repeated checks, which is essential when verifying jig alignments, machine set-ups or assembly fixtures. The 400 x 265 mm size balances reach and rigidity, making it suitable for medium-format components where a true 90° reference is required. By keeping mechanical tolerances tight, inspection processes become faster and less dependent on corrective rework. Robust construction that stands up to the workshop A flat profile and hardened finish ensure secure seating against measured surfaces and minimise rocking that can introduce error. The corrosion-resistant stainless-steel construction helps maintain surface integrity in mixed workshop environments and reduces maintenance cycles compared with untreated steels. At roughly 2.5 kg, the unit is heavy enough to sit stably during checks yet light enough for convenient handling, so inspection routines remain efficient without compromising repeatability. Practical packaging and inventory readiness Delivered in a protective cardboard box, the square arrives ready for immediate integration into inspection kits or storage racks with minimal risk of transit damage. The clear size marking and GTIN facilitate inventory management and traceability for production control. As a Metav IndustryLine item, the tool is part of a broad precision range that supports streamlined procurement and predictable supply — useful for workshops consolidating suppliers to reduce administrative overhead. Choose Metav IndustryLine quality for dependable angle inspection; contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.329 GTIN: 4054469108148 Manufacturer: Metav IndustryLine Facts Size: 400 x 265 mm Weight: 2.5 kg Tariff number: 90178090 eClass: 21170119 Special features Material: hardened stainless steel Standard: DIN 875/1 Flat profile for stable contact Supplied in cardboard box FAQ What is the primary use of this inspection square? The inspection square M214.329 is intended for right-angle checks and alignment verification in workshop and inspection settings in accordance with DIN 875/1. Is the square suitable for routine shop-floor use? Yes; the hardened stainless-steel construction and flat profile make the M214.329 robust enough for regular shop-floor inspections and fixture checks. Does the tool resist corrosion and wear? The product is made from hardened, corrosion-resistant stainless steel, which reduces surface degradation during normal workshop use. What sizes and reach does the square provide? The tool offers a 400 x 265 mm blade and body combination, providing a balance of reach and rigidity for medium-format components. How is the square delivered and how should it be stored? The inspection square is supplied in a protective cardboard box suitable for transport and short-term storage; long-term storage in a dry, clean environment is recommended to preserve surface condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x265 mm Stop Angle, Hardened Stainless Steel, DIN 875/1, With Stop In Cardboard Box - Metav IndustryLine
Take advantage of a hardened stainless construction and DIN 875/1 accuracy to ensure repeatable squaring for production and inspection tasks; the integral stop and robust dimensions reduce setup time and increase throughput. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Precision stop square M214.339 — 400 x 265 mm, hardened stainless (Metav IndustryLine) Precision stop square M214.339 for accurate squaring and alignment in machine shops and quality control 400 x 265 mm precision square, stainless Hardened construction for long-term stability Conforms to DIN 875/1 for verified squareness Accurate alignment for consistent production The 400 x 265 mm face area provides a stable reference for repetitive positioning and component squaring, making it suitable for both set-up and inspection work. Manufactured from hardened stainless steel, the instrument resists corrosion and maintains its geometry under workshop conditions; this stability reduces rework and supports predictable cycle times. Conformance with DIN 875/1 guarantees a defined tolerance band for squareness, allowing measurement and assembly processes to rely on a certified reference. Robust design that speeds workflow An integral stop simplifies fixturing and shortens the time required to clamp or position parts, which enhances throughput in medium-sized production cells. The compact yet rigid layout balances weight and stiffness for handable operation while preserving the flatness and perpendicularity required for precision tasks. Supplied in a practical cardboard box, the unit is ready for immediate integration into tool cupboards or transport between benches without elaborate packaging. Practical applications and workshop benefits The item is suited to tasks such as layout work, machine set-up, fixture inspection and component squaring where a repeatable right angle is required. Using a verified angle reference reduces inspection variation and supports quality control routines, helping to stabilise process capability indices. Sourcing this precision tool through Metav IndustryLine ensures steady availability and complements a wider toolkit of metrology solutions, providing a pragmatic route to tighter tolerances on the shop floor. For reliable squaring and durable workshop performance, contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich Technical data Article number: M214.339 GTIN: 4054469108230 Category: Angle / square Weight: 2.5 kg Dimensions: 400 x 265 mm Material: hardened stainless steel Standard: DIN 875/1 Packaging: cardboard box Tariff code: 90178090 Facts Dimensions (mm): 400 x 265 Mass (kg): 2.5 GTIN: 4054469108230 Tariff number: 90178090 Special features Hardened stainless steel construction Conforms to DIN 875/1 tolerance class Integral stop for repeatable positioning Supplied in cardboard box Suitable for machine set-up and inspection FAQ What level of squareness tolerance does this tool offer? The precision stop square M214.339 meets the squareness criteria of DIN 875/1, providing a standardised tolerance suitable for workshop inspection and alignment tasks. Is the material resistant to corrosion and workshop wear? Yes, the unit is made from hardened stainless steel which delivers corrosion resistance and maintains geometry under normal workshop conditions. How should the square be stored between uses? Store the square in its cardboard box or on a flat, dry surface to avoid knocks; the hardened surfaces reduce maintenance but mechanical protection during storage helps ensure long service life. Can the integral stop be used for fixture set-up on a machine table? The integrated stop is designed for repeatable positioning and aids fast fixturing on machine tables and assembly jigs, improving set-up efficiency. Is this product suitable for quality control inspections? The M214.339 precision stop square is appropriate for routine inspection and layout work, offering a defined reference angle in conformance with DIN 875/1 standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x265 mm Stop Square With Stop, DIN 875/1, Mild Steel - Metav IndustryLine
Benefit from a combination of precision to DIN 875/1, a robust carbon steel construction and large measuring faces that ensure stable, repeatable right‑angle set‑ups. Order the item directly via Metav Werkzeuge or consult the technical team for application advice. Squaring stop 400 x 265 mm — precision square, DIN 875/1 (Metav IndustryLine) A Squaring stop 400 x 265 mm designed for reliable right‑angle referencing and set‑up work on machine benches and inspection tables. Precision to DIN 875/1 Robust carbon steel construction Large 400 x 265 mm measuring faces Stable 3.2 kg mass for repeatable set-ups Dependable precision for workshop set‑up and inspection The square is manufactured to DIN 875/1, providing a defined accuracy class that supports consistent alignment and inspection tasks. Thanks to the 400 x 265 mm measuring faces, the gauge offers a balance between reach and rigidity, making it suitable for squaring castings, fixtures and assembled units. The standardised tolerance class simplifies quality documentation and helps maintain process reliability across repetitive operations. Stability and material benefits that reduce rework Constructed from carbon steel, the device delivers the mass and stiffness required for stable contact during marking and checking operations; the 3.2 kg mass dampens vibration and helps hold position on a bench. The robust material choice combined with the included stop reduces the need for temporary clamping and shortens set‑up time, improving throughput in small to medium batch production. The unit’s finish resists routine workshop wear and supports long service life under normal handling. Easy integration into routine workflows and simple care The design supports common workshop procedures: right‑angle referencing, alignment against machine tables and fixture validation. The plain‑steel construction is straightforward to maintain — light oiling and clean storage prevent corrosion and preserve accuracy. For inventory and procurement, the item is listed under the Metav IndustryLine range and integrates readily into inspection kits or dedicated set‑up stations, helping maintain a consistent quality standard across shifts. Contact Metav Werkzeuge to discuss suitability for specific applications or to request delivery from Emmerich for rapid supply and local stock verification. Technical Data Article number: M214.359 GTIN: 4054469108391 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 265 mm Weight: 3.2 kg Tariff number: 90178090 Special features Material: Normalstahl (carbon steel) Standard: DIN 875/1 Feature: with stop FAQ What tolerance class applies to this square? The squaring device is manufactured to DIN 875/1, which defines the precision class used for consistent right‑angle checks and workshop set‑ups. Is the material suitable for heavy workshop use? Yes; the Squaring stop 400 x 265 mm is made from carbon steel (Normalstahl), chosen for its stiffness and durability under routine handling. What applications are typical for this type of square? Typical uses include fixture and component squaring, alignment on machine benches, and comparative checks during assembly and inspection processes. How should the square be maintained to preserve accuracy? Wipe clean after use, apply a light protective oil film to prevent corrosion, and store on a flat, dry surface away from impacts to maintain long‑term accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x400x50 mm Granite 90° Square Angle Plate, Four-Sided Ground, DIN 876/0 Surface, DIN 875/0 Accuracy - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, corrosion‑resistant granite construction and DIN‑specified surfaces for reproducible squaring and inspection work; order directly via Metav Werkzeuge or consult our specialists for application guidance. Granite 90° Angle Plate 400 x 400 x 50 mm, Grade 0 — Metav IndustryLine A Granite 90° angle plate 400 x 400 x 50 mm designed as a stable squaring reference for inspection benches, toolrooms and precision set‑ups Machined and ground on four sides Corrosion- and acid-resistant granite Surface per DIN 876/0; squareness DIN 875/0 Grade 0 accuracy for metrology Reliable reference geometry that reduces rework A solid squaring reference in granite provides a dimensionally stable base that minimises thermal distortion and vibration influence during inspection. The sizeable 400 x 400 x 50 mm footprint combines reach with rigidity, allowing repeatable positioning of workpieces while preserving the reference angle. The declared Grade 0 tolerance indicates suitability for laboratory‑grade inspection tasks where consistent right‑angle references shorten setup times and reduce downstream rework. The machined and ground faces create a predictable contact condition that benefits both manual checks and optical alignment procedures. Measurable standards for traceable results Compliance with DIN 876/0 for the surface and DIN 875/0 for squareness offers an objective basis for quality documentation and process control. These standards define the flatness and angular limits that are expected for a metrological angle standard, enabling integration into existing quality systems and inspection plans. The granite construction keeps noise in measurement low and supports stable readings on dial gauges, test indicators or digital probes. Where traceability is required, the combination of material and norm conformity supports reproducible measurement chains. Easy handling in workshop and inspection workflows The square format and moderate thickness make the unit convenient to position on tables or in inspection fixtures while remaining sufficiently heavy for stable contact: the mass dampens small disturbances during measuring. The block’s machined faces supply consistent seating for measuring fixtures and clamps, improving the reliability of comparative checks. When used as a reference for squareness checks or for setting machine zeroes, the component speeds up routine tasks and helps maintain throughput in production measurement loops. Long service life with low maintenance needs Granite selected for metrological use resists corrosion and many chemical effects, giving the component a long operational life with minimal upkeep. Occasional cleaning with a lint‑free cloth and an appropriate solvent keeps the ground faces in specification; abrasive cleaning should be avoided to preserve the certified surface finish. Robust by design and requiring little calibration intervention, this angle plate is a practical investment for labs and workshops that demand stable geometric references over years of use. For precision squaring and documented inspection results, contact Metav Werkzeuge in Emmerich to discuss delivery and application details for the Metav IndustryLine granite angle plate; email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice Technical Data Article number (SKU): M214.614 GTIN: 4054469183787 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 400 x 50 mm Weight: 24 kg ECLASS: 21170119 Special features Material: Granite, corrosion- and acid-resistant Machined and ground on four sides Surface: DIN 876/0 Squareness: DIN 875/0 Grade: 0 precision FAQ What level of squareness accuracy does the angle plate offer? The angle plate is specified as Grade 0, with squareness measured to DIN 875/0, providing a high‑precision 90° reference suitable for metrological inspection. Is the surface suitable for use with gauges and optical systems? Yes, the ground surface per DIN 876/0 gives a stable contact condition that is well suited to dial gauges, test indicators and optical alignment methods. How heavy is the unit and does it require special handling? The block weighs 24 kg; its mass contributes to measurement stability. Standard lifting with appropriate care is advised rather than mechanical fixtures for one‑person handling. Can the angle plate be used in corrosive environments? Constructed from corrosion‑ and acid‑resistant granite, the plate tolerates typical workshop environments better than many metallic alternatives; routine cleaning preserves the surface finish. Is this product suitable for laboratory and shop‑floor inspection? The combination of Grade 0 precision and DIN conformity makes it suitable for both laboratory calibration benches and demanding shop‑floor inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x28 mm Cutmaker Precision Try Square Grade 00 DIN 875, Stainless Steel, Matt Chrome Finish - Metav IndustryLine
Take advantage of the combination of DIN 875/00 class 00 accuracy, corrosion‑resistant stainless steel construction and a compact 40×28 mm footprint for reliable right‑angle checks in fine metalworking; order the item directly via Metav Werkzeuge or consult the team for application advice. M214.011 Precision Square — DIN 875/00, 40×28 mm, stainless steel (Metav IndustryLine) The M214.011 Precision Square is a class 00 DIN 875 angle gauge designed for verification and marking tasks in toolmaking and fine mechanical workshops DIN 875/00 class 00 accuracy Stainless steel, matt chrome finish Compact 40×28 mm footprint Supplied in protective transport case Trusted squareness for precision tasks The instrument delivers repeatable right‑angle checks thanks to its compliance with DIN 875/00, which defines tolerances for small precision squares. In practical terms, the class 00 designation ensures tight angular control suitable for toolmaking and precision inspection tasks, reducing adjustment cycles and rework. The standardised tolerance gives a verifiable reference when aligning jigs, inspecting machined faces or setting up milling and drilling operations, so inspection results can be documented and traced with confidence. Compact format with workshop‑grade corrosion protection With a 40×28 mm blade and heel geometry, the square combines a small working area with a robust cross‑section: the short leg measures 6×3.5 mm and the long leg 5×3.5 mm, offering a stable contact surface that resists twisting during manual handling. Crafted from stainless steel with a matt chrome finish, the tool is rust‑resistant and suited to busy shop environments where coolant splash or humidity can otherwise impair accuracy. Delivery in a protective case safeguards the squareness during transport and storage, maintaining calibration between uses. Practical benefits at the bench and in the inspection bay The square is optimised for marking, visual inspection and setup work where a compact, reliable reference is required. Its small size makes it easy to manoeuvre into confined fixtures and between clamping elements, while the hardened, ground faces provide a stable datum for scribing and comparison. For workshops seeking a consistent reference instrument, the compact precision square offers a simple, low‑maintenance solution that integrates seamlessly into quality routines and inspection protocols. For workshop supply and expert advice on the M214.011 Precision Square from Metav IndustryLine, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and technical consultation. Technical data Article number: M214.011 GTIN: 4054469106052 eClass: 21170119 Tariff number: 90178090 Standard: DIN 875/00 Dimensions & core data Size: 40 × 28 mm Short leg section: 6 × 3.5 mm Long leg section: 5 × 3.5 mm SKU: M214.011 Materials & special features Material: stainless steel, matt chrome finish Corrosion protection: rustproof Delivery: supplied in a plastic or wooden case for transport Category: Angle / square Intended use: precision angle verification and marking in fine metalwork and toolmaking FAQ What accuracy does the square offer? The square meets DIN 875/00 tolerances for class 00, providing the tight angular control expected for small precision squares used in toolmaking. Is the instrument suitable for use near coolant or humid environments? Yes, the stainless steel construction with a matt chrome finish gives corrosion resistance, and the item is supplied in a protective case to preserve its condition. Can this square be used for fixture alignment and marking operations? The compact dimensions and stable leg sections make the square well suited to marking, fixture alignment and visual inspection tasks in workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x90° Miter Gauge Aluminium Black Anodised Direct Angle Reading - Metav IndustryLine
Take advantage of precise 4×90° alignment, robust black anodised aluminium construction and immediate direct angle reading for faster saw set-ups and consistent results. Order the miter angle gauge directly via Metav Werkzeuge or ask the consultants for advice. Miter Angle Gauge M214.158 — 4×90°, aluminium, black anodised Miter Angle Gauge M214.158 is a compact, workshop-grade tool for angle measurement and quick alignment of chop and miter saws. Precision 4×90° alignment Direct angle reading for fast setup Black anodised aluminium construction Lightweight 0.1 kg for easy handling Faster, repeatable 90° set-ups for production and workshop use The solid aluminium body with black anodised finish gives a stable reference that resists wear and glare, enabling consistent positioning when cutting or checking assemblies. The instrument provides four 90° faces which simplify multi-directional alignment tasks; this reduces repositioning time and minimises rework. Thanks to the direct angle reading feature, the current angle or mitre can be read immediately without additional conversion or auxiliary gauges, supporting efficient cycle times in small-batch production and daily workshop routines. Use of a light, rigid material keeps the tool easy to manoeuvre while maintaining dimensional stability under normal handling. Designed for practical workshop handling and rapid adjustment A weight of approximately 0.1 kg and compact dimensions make the unit easy to hold against fences and saw tables while making quick adjustments. The construction balances low mass with sufficient stiffness so that readings remain reliable during one-handed operation. The clear graduation (scale) supports rapid visual checks and alignment procedures commonly required when setting up miter saws or jigs. The gauge is particularly useful where repeated 90° checks are needed—on frames, skirting, trim or fixture assembly—cutting time spent on measurement and improving throughput without sacrificing accuracy. Clear technical behaviour and compatibility with common workflows Measurements are presented in a straightforward manner suitable for workshop staff and quality checks; the device is intended for practical alignment rather than laboratory metrology. The robust surface treatment improves resistance to light contact and chips, while the simple geometry means it integrates directly into standard jigging and clamping setups. As an industrial companion, this gauge complements stationary angle-measuring tools and digital inclinometers where rapid mechanical alignment is required before a final electronic check. Metav IndustryLine quality control ensures consistent batch characteristics and dependable repeatability in everyday use. For reliable 90° set-ups and dependable workshop performance, contact Metav Werkzeuge to discuss supply and integration of the Metav IndustryLine miter angle gauge (M214.158) and secure consistent alignment results for production and maintenance tasks. Technical Data Article number: M214.158 GTIN: 4054469183336 Brand: Metav IndustryLine Facts Material: Aluminium, black anodised Dimensions: 185 x 63 x 14 mm Weight: 0.1 kg Measurement range: 4×90° Scale graduation: 2° Special features Direct reading of measuring angle and miter angle Suitable for angle measurement and setting of chop and miter saws Compact, lightweight design for one-handed handling Category: Angle measuring devices FAQ How accurate is this gauge for setting saws to 90°? The Miter Angle Gauge M214.158 offers a robust mechanical reference for repeatable 90° set-ups; its design focuses on reliable workshop alignment rather than laboratory-grade micrometre accuracy. Can the gauge be used directly on mitre and chop saw fences? Yes, the aluminium construction and four 90° faces allow direct contact with fences and workpieces for quick angle checks and saw adjustments. Is the surface finish durable against shop use? The black anodised surface enhances wear and corrosion resistance, making the tool suitable for regular workshop handling. Does the tool require calibration before first use? The gauge is supplied as a mechanical reference; for traceable calibration requirements, consult Metav Werkzeuge about available verification options. Which applications benefit most from this gauge? Typical uses include setting up mitre and chop saws, checking corner squareness on assemblies, and quick alignment tasks in joinery, metalwork and general workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 x 40 mm Hair Square, Grade 00 DIN 875, Stainless Steel Flat Edges, Supplied in Case - Metav IndustryLine
Take advantage of compact dimensions and hardened measuring edges for reliable right‑angle checks in inspection and bench work; the robust stainless‑steel construction with matt chrome finish supports long service life and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for delivery and technical guidance. Hairline square 50 x 40 mm — DIN 875/00, stainless steel (Metav IndustryLine) The Hairline square 50 x 40 mm is a compact precision angle gauge for workshop inspection and layout work, built for repeatable 90° checks on small components and assemblies. DIN 875/00 accuracy class 00 Stainless steel, matt chrome finish Hardened measuring edge for wear resistance Compact 50 x 40 mm format Precise angle control for inspection and layout The square is manufactured to DIN 875/00, class 00, which defines a high level of angle accuracy suitable for fine inspection tasks. This standardised tolerance ensures that angle checks performed with the tool can be relied on as part of incoming inspection or routine quality control. The hairline concept and finely finished edges produce a clear sightline for layout work, while the flat profile supports stable seating against reference surfaces. Emphasis on measurable conformity provides a rational basis for process decisions and reduces rework. Robust construction for long service life Constructed from stainless steel with a matt chrome finish and a hardened measuring edge, the tool is designed to withstand frequent use in busy workshops. The hardened edge resists wear, maintaining edge integrity and thus preserving the calibrated geometry over time. The matt chrome surface reduces glare under workshop lighting, aiding visual alignment during marking and inspection. Compact form factor and low mass make the instrument easy to manoeuvre on benches and fixtures without sacrificing stiffness. Practical handling and application benefits The compact 50 x 40 mm footprint supports access to confined spaces where larger squares cannot be used, making the tool well suited to component work, jig checks and small‑assembly verification. The hairline measuring edge enables precise visual alignment with drawn or machined lines, and the flat design offers a stable contact area for right‑angle verification. Delivered in a protective case for transport, the instrument is kept safe in transit and during storage, which contributes to long‑term measurement reliability and consistent results across production runs. Proven supply and workshop support As part of the Metav IndustryLine range, the tool benefits from Metav’s European distribution and quality screening; stock is held centrally in Emmerich to support dependable delivery. The combination of industry standard conformity and robust finishing supports efficient inspection workflows and lowers the operational risk of undetected angular errors. For procurement decisions, the documented standard and material specifications offer a sound, evidence‑based argument for selection in both small workshops and production environments. Contact Metav Werkzeuge in Emmerich for technical clarification or to request delivery information and suitability advice for metrology applications Technical Data Article number: M214.002 GTIN: 4054469105963 Norm: DIN 875/00 Facts Dimensions: 50 x 40 mm eClass: 21170127 Tariff number: 90178090 Special features Material: stainless steel, matt chrome with hardened measuring edge Accuracy: DIN 875/00, class 00 Design: flat profile with hairline measuring edge Delivery: protective case for transport FAQ What does DIN 875/00 class 00 mean for measurement tasks? DIN 875/00 class 00 defines a high tolerance for right‑angle accuracy; the hairline square supplied meets that standard for reliable inspection and layout use. Is the hairline square suitable for shopfloor and laboratory use? Yes, the hairline square is suitable for both workshop inspection and precision bench work thanks to its hardened edge and matt chrome finish. What materials is the tool made from and how does that affect durability? The tool is made from stainless steel with a matt chrome finish and a hardened measuring edge, which together increase corrosion resistance and wear performance. Does the delivery include protective packaging? The hairline square is delivered in a protective case for transport to safeguard the measuring edges during shipment and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com