63mm Planing Cutter Head for SDMT 09T3 Indexable Inserts, 6 Teeth, 22mm Shank - Teknik Makina

Benefit from a combination of carbide construction and the YBC302 grade for reliable chip control and consistent edge life; this makes the product especially suited to productive turning tasks. Order the inserts via Metav Werkzeuge or consult their technical advisors for integration into existing tooling. SDMT SDMT09T312-DM YBC302 — indexable turning insert by ZCC-CT The SDMT09T312-DM YBC302 is an indexable turning insert designed for stable finishing and semi-finishing operations in CNC turning applications Stable chip control with YBC302 grade Broad compatibility with SDMT toolholders Consistent edge life for reproducible parts Efficient set-up and reliable repeatability Consistent cutting performance that increases throughput The SDMT-style indexable insert is manufactured from carbide and specified with the YBC302 grade, offering a balance of wear resistance and toughness suited to serial machining. The substrate and grade combination promotes chip control and a predictable edge life, which reduces unplanned tool changes and helps maintain cycle times. In practical terms, the design reduces process variability and supports throughput targets without demanding complex parameter changes on the machine. Simple integration into existing turning systems for fast setup The ISO designation and geometry of this insert match established SDMT toolholder systems, enabling quick mechanical integration and tight clamping accuracy. That compatibility shortens set-up time and supports reproducible insert indexing during tool change, which assists process stability across shifts. The result is a turning solution that fits into established tooling strategies while preserving margin for incremental process optimisation. Measurable benefits for production quality and planning Stable cutting behaviour from a robust carbide grade leads to consistent surface quality and dimensional repeatability. Fewer surprises at the tool edge translate into lower scrap rates and steadier inspection outcomes, supporting predictable scheduling and inventory of cutting edges. The overall package helps production planners deliver repeatable component quality while maintaining productive machining windows. Contact Metav Werkzeuge for specification support and prompt supply of SDMT09T312-DM YBC302 inserts through their technical sales team Technical data Article number: SDMT09T312-DM YBC302 SKU: SDMT09T312-DM YBC302 Material: carbide Grade: YBC302 Type: SDMT Manufacturer: ZCC-CT Core data No core numerical specifications provided Special features ISO designation: SDMT09T312-DM Product type: indexable turning insert Insert family: SDMT Application hint: turning insert for finishing / semi-finishing FAQ What work does this insert suit? The SDMT09T312-DM YBC302 insert is intended for general turning tasks where stable chip formation and consistent edge life are priorities; final suitability should be verified against the actual workpiece material and process parameters. Which toolholders accept this geometry? The insert conforms to the SDMT insert family and is compatible with SDMT-design toolholders; appropriate clamping and seat geometry ensure correct fit and repeatable positioning. Does YBC302 indicate a coating or grade? YBC302 denotes the cutting grade; consult the supplier datasheet for full details on coating, recommended cutting parameters and substrate composition for the SDMT09T312-DM YBC302. How does this insert contribute to process stability? By combining a defined carbide substrate with a production-grade cutting profile, the insert reduces edge wear variability and supports consistent surface finish and dimensional accuracy across runs. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a proven cemented carbide construction, the YB9320 grade for consistent wear behaviour, and the standard SDMT09T312‑DM designation to simplify tool selection and maintain steady production flow; order directly via Metav Werkzeuge or consult the team for grade and holder compatibility. SDMT SDMT09T312-DM YB9320 by ZCC-CT — SDMT indexable insert, cemented carbide SDMT09T312‑DM YB9320 is a compact indexable insert designed for industrial machining tasks that demand consistent edge stability and repeatable performance Cemented carbide YB9320 grade ISO SDMT09T312‑DM designation Compact insert geometry Consistent cutting performance for productive machining The cemented carbide composition and the YB9320 grade combine to provide wear resistance and dimensional consistency across production batches. As an indexable insert, the component is intended to offer repeatable performance under defined cutting conditions; the ISO-style designation supports reliable interchangeability with matching toolholders. The material choice and grade prioritise longevity of the cutting edge, which reduces the frequency of insert changes and contributes to steady machine utilisation. Improved uptime through stable edge life A stable cutting edge reduces variation in part quality and lowers the need for frequent rework. The insert’s grade specification is selected to balance toughness and hardness, helping to maintain a sharp edge over longer tool lives and thus supporting continuous operation. Predictable wear behaviour allows planners to better schedule maintenance windows and thereby increase overall equipment effectiveness. Easier tool selection and process documentation The clear ISO-style code and the SDMT type simplify parts lists and procurement documentation. Using the SDMT09T312‑DM designation in process sheets and tool libraries shortens setup time when matching inserts to holders and fixtures, which aids process standardisation. Traceability of insert type and grade supports quality assurance and enables faster root‑cause analysis when process deviations occur. Practical integration and handling benefits The compact format of the insert and its industry-standard designation make it straightforward to store and handle within established tooling systems. The cemented carbide construction permits consistent clamping and predictable performance when inserted into indexable toolholders, improving reproducibility in serial manufacturing. Where further orientation or matching to a specific holder is required, Metav Werkzeuge’s consultation services are available to advise on compatibility and best practice. For procurement or technical advice on the ZCC‑CT SDMT09T312‑DM YB9320 insert, please contact Metav Werkzeuge GmbH — consultants can assist with grade selection, toolholder matching and process planning. Technical Data Article number: SDMT09T312-DM YB9320 Designation: SDMT09T312‑DM Type: SDMT indexable insert Material: Hartmetall Grade: YB9320 Manufacturer: ZCC-CT UID: SDMT09T312-DM YB9320 Core data No numerical specifications provided in source data Special features Cemented carbide construction ISO-style designation for easy identification Compact insert geometry Intended for indexable insert systems Storytrigger: wendeplatten FAQ What is the material and grade of this insert? The insert is made of cemented carbide and specified in grade YB9320, offering a balance of wear resistance and edge stability. How is the part identified for procurement? Order or reference the insert using the article number SDMT09T312‑DM YB9320 and the SDMT type designation for accurate procurement. Can this insert be used across different toolholders? The SDMT09T312‑DM designation follows industry‑style identification, which facilitates matching with compatible indexable toolholders; verify holder compatibility before assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a carbide substrate and the YBD252 grade for robust wear resistance and stable performance in indexable turning operations; order the SDMT09T312-DM insert directly via Metav Werkzeuge or consult the technical team for application support. SDMT SDMT09T312-DM YBD252 — indexable turning insert by ZCC-CT SDMT09T312-DM YBD252 is a compact indexable turning insert designed for reliable metal‑removal tasks in industrial turning applications Solid carbide construction for durable edge life YBD252 grade for balanced wear resistance Standard SDMT09T312-DM geometry for easy replacement Consistent productivity through robust carbide engineering The insert is manufactured from carbide, a substrate valued for its hardness and heat resistance, and graded YBD252 to deliver a balanced combination of wear resistance and toughness. This composition reduces flank wear under typical turning conditions, which in turn enhances tool life and minimises unscheduled tool changes. For production environments where cycle time and repeatability matter, the combination of a stable substrate and a performance‑oriented grade supports continuous operation and predictable maintenance intervals, helping to maintain steady output and lower overall tooling costs. Precise geometry for secure seating and predictable results The SDMT09T312-DM geometry ensures consistent seating in compatible indexable toolholders and reliable chip‑forming behaviour. Clear geometry codes facilitate tool management and replacement planning in stocked systems. Predictable chip control from a defined insert form reduces the risk of interrupted cuts and supports consistent surface finishes with fewer rework steps. Where tool‑holder compatibility is required, the standardised insert shape simplifies inventory and replacement strategies while preserving machining quality across multiple shifts. Practical integration and procurement for workshop use As a standard indexable insert, the product fits common turning tool systems and is suited to systematic tooling strategies that favour insert interchangeability and straightforward stock keeping. Procurement benefits from the SKU traceability and the clarity of the ISO designation for rapid identification during planning or reordering. For firms that prioritise operational continuity, specifying inserts with known grades and standard geometries contributes to reproducible results and streamlined supplier communication. Contact Metav Werkzeuge for detailed application advice or availability of the SDMT09T312-DM YBD252 insert; technical advisors are available via e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: SDMT09T312-DM YBD252 Type: SDMT insert Grade: YBD252 Material: carbide Manufacturer: ZCC‑CT Data SKU: SDMT09T312-DM YBD252 ISO designation: SDMT09T312-DM Designation: SDMT Special features Indexable turning insert Solid carbide substrate Standardised geometry for toolholder compatibility Suitable for structured inventory management FAQ What materials is this insert designed to machine? The SDMT09T312-DM with YBD252 grade is a carbide indexable insert intended for general turning tasks; specific material compatibility depends on cutting data and machining parameters. How does the YBD252 grade affect performance? The YBD252 grade provides a balance between hardness and toughness, supporting longer tool life and consistent wear behaviour in routine turning operations. Is this insert compatible with common toolholders? The SDMT form factor follows standard insert geometry, enabling compatibility with toolholders designed for SDMT inserts and simplifying replacement. How should chip control be assessed for this insert? Chip behaviour is influenced by insert geometry, cutting parameters and workpiece material; the SDMT09T312-DM geometry promotes predictable chip formation when matched with appropriate feeds and speeds. Kennametal: Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com ISCAR: Manufacturer/Responsible: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Sandvik: Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com MetavCUT: Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency detected: the specified manufacturer "ZCC-CT" is not listed among the permitted manufacturers (Kennametal, ISCAR, Sandvik or MetavCUT) required by the product template. The current workflow demands a matching manufacturer with a verified full address from that predefined set in order to produce a compliant product description; without this, generation of the requested, standards-compliant text is not possible. Please provide either a manufacturer from the accepted list or supply a confirmed full manufacturer name and postal address so the description can be created according to the specified editorial and legal requirements. If assistance is needed to resolve the data mismatch, contact the data team at info@metav-werkzeuge.com or call +49 2822 7131930 for support.

Take advantage of the proven combination of carbide construction, the YBG212 grade and a compact SDMT geometry for consistent machining and economical tool life; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific selection. SDMT SDMT09T312-DM YBG212 indexable insert by ZCC-CT — carbide insert for turning applications The SDMT09T312-DM YBG212 is an indexable turning insert designed for stable performance in routine machining tasks, offering a reliable cutting edge and consistent chip behaviour for production environments. SDMT geometry for reliable turning Carbide body in YBG212 grade Stable chip formation for productivity Fits standard SDMT toolholders Consistent chip control for productive cycles The SDMT design delivers a predictable chip flow that supports uninterrupted production. With a carbide substrate and the YBG212 grade, the insert promotes stable chip formation, which reduces the likelihood of interruptions caused by poor chip evacuation. This consistency translates into fewer machine stops and a more efficient process flow, especially where reproducible results are required. Balanced wear resistance for longer tool life The choice of YBG212 as the cutting grade provides a balance between wear resistance and toughness, helping to maintain the cutting edge under varied machining loads. Such a balanced grade is intended to reduce flank wear and preserve dimensional accuracy over longer tool life, offering an economical solution for repetitive turning tasks without excessive tool-change frequency. Geometry tailored for standard turning holders The SDMT designation indicates a standardised insert geometry that is compatible with commonly used turning holders. This indexable insert format allows quick replacement and orientation changes, minimising downtime during tool changes. The standard geometry also supports consistent clamping and repeatable positioning within holder systems. Carbide substrate for thermal and mechanical stability Manufactured from carbide, the insert provides the hardness required for efficient material removal while retaining sufficient toughness to resist edge chipping. Carbide's thermal stability helps the insert withstand elevated cutting temperatures, maintaining cutting performance across extended cycles and reducing unexpected tool failures. Simple inventory and fast replacement strategy Using a standard SDMT insert simplifies tool management: the same insert geometry and grade can be stocked for multiple machines and applications, enabling fast replacements and predictable performance. This approach supports smoother production planning and reduces the administrative overhead associated with specialised tooling. Product quality and selection support The SDMT09T312-DM YBG212 insert is supplied as a ready-to-fit indexable cutting option from a recognised manufacturer. For customers seeking guidance on integration, cutting parameters or compatible holders, a brief consultation will ensure the chosen insert matches the intended machining strategy and productivity targets. Contact Metav Werkzeuge for tailored recommendations on the ZCC-CT SDMT09T312-DM YBG212 insert and ensure optimal selection for specific turning applications Technical data Article number: SDMT09T312-DM YBG212 Designation: SDMT09T312-DM Type: SDMT SKU/UID: SDMT09T312-DM YBG212 Manufacturer: ZCC-CT Core specifications Insert size designation: 09T312 Grade: YBG212 Material class: Carbide Features and design Indexable turning insert Carbide construction (Hartmetall) Standard SDMT geometry Double-sided insert format (standard DM type designation) Manufacturer: ZCC-CT FAQ What machining tasks is this insert intended for? The SDMT09T312-DM YBG212 indexable insert from ZCC-CT is intended principally for turning operations where consistent chip control and predictable edge behaviour are priorities. What material is the insert made from? The insert is manufactured from carbide (Hartmetall) and supplied in the YBG212 grade, combining hardness with balanced toughness for routine machining. Is the SDMT09T312-DM compatible with common holders? Yes, the SDMT geometry is a standardised format and the SDMT09T312-DM from ZCC-CT is designed to fit typical SDMT turning holders for straightforward replacement. How does the YBG212 grade affect performance? The YBG212 grade used for the SDMT09T312-DM aims to offer a compromise between wear resistance and edge toughness, supporting steady tool life and reproducible cutting results. Kennametal: Hersteller: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com ISCAR: Manufacturer/Responsible: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Sandvik: Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com MetavCUT: Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of cemented carbide construction and the YBG302 grade for consistent tool life and stable chip control; benefit from precise turning results and reliable production flow by ordering via Metav Werkzeuge or consulting the technical team for application advice. SDMT SDMT09T312-DM YBG302 indexable turning insert, cemented carbide — ZCC-CT The SDMT SDMT09T312-DM YBG302 is an indexable turning insert engineered for general turning tasks where wear resistance and reproducible cutting behaviour are required. Cemented carbide grade YBG302 for long life Positive geometry for stable chip control Compatible with SDMT toolholders Consistent performance across turning operations Built for predictable productivity and low tooling costs The insert’s cemented carbide composition and designated YBG302 grade provide a balance of hardness and toughness that reduces flank wear and unexpected breakage. This translates into fewer tool changes and more predictable process intervals, helping to lower total tooling costs per component. In practice, the combination of material and geometry ensures stable cutting forces, which supports higher machine utilisation and more consistent cycle times. Improved surface finish through controlled chip formation A positive insert geometry supports effective chip control, reducing the risk of chip re-cutting and surface damage. Controlled chip formation helps to maintain a consistent surface finish across a production batch and simplifies chip evacuation, which benefits both manual and automated turning setups. For less experienced operators, the predictable behaviour of the insert makes setup and parameter adjustment more straightforward, improving first-part quality. Practical handling and integration into existing tool systems The insert is delivered in the industry-standard SDMT shape and fits common toolholder systems that accept this designation. Its specification supports straightforward indexable usage: when one cutting edge wears, the insert can be indexed to a fresh edge, extending overall insert life. The clear ISO designation and carbide grade simplify tool selection and stock management, ensuring rapid integration into existing production workflows without complex conversions. For reliable, productive turning with YBG302 carbide, contact Metav Werkzeuge for availability and application support: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SDMT09T312-DM YBG302 ISO designation: SDMT09T312-DM Type: SDMT insert Carbide grade: YBG302 Material: Cemented carbide Manufacturer: ZCC-CT Facts No numerical specifications provided Special features Indexable turning insert Positive cutting geometry for chip control Suitable for standard SDMT toolholders Designed for reproducible cutting performance FAQ What does the grade YBG302 indicate for this insert? The YBG302 designation specifies the carbide grade and its balance of hardness and toughness; the SDMT09T312-DM YBG302 insert from ZCC-CT uses this grade to achieve reliable wear resistance and consistent cutting performance. Can this insert be indexed to use multiple cutting edges? Yes, the SDMT09T312-DM insert is an indexable design; worn edges can be rotated to present a fresh cutting edge, extending the service life of each insert. Is the SDMT09T312-DM suitable for automated turning centres? The insert’s predictable cutting behaviour and stable chip control make the SDMT09T312-DM YBG302 appropriate for both manual lathes and automated turning centres when used with compatible SDMT toolholders. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of robust carbide construction and the YBM351 grade's wear resistance for steady, predictable machining results; order the insert directly via Metav Werkzeuge or consult their specialists for application support. SDMT09T312-DM YBM351 SDMT indexable insert, carbide – ZCC-CT The SDMT09T312-DM YBM351 is an SDMT indexable insert engineered for precision turning and reliable chip control in general machining applications. SDMT geometry for consistent edge engagement Carbide grade YBM351 for wear resistance Reliable chip control and surface finish High process reliability through engineered carbide grade The combination of a solid carbide body and the YBM351 material grade delivers consistent abrasion resistance and edge stability under repetitive cutting loads. This insert is designed to reduce unexpected tool changes and to maintain dimensional stability across runs, which supports a steady production rhythm. The material choice and grade selection mean fewer interruptions for tool replacement, contributing to improved overall equipment effectiveness and predictable output. Improved surface quality via controlled chip formation The SDMT geometry promotes reliable chip control, which translates directly into improved surface finish and reduced rework. As an indexable insert, the component allows simple seat-and-lock replacement of cutting edges without changing the entire toolholder, speeding up maintenance cycles. For process planners, this means a clear separation of cutting-edge life from holder lifespan, enabling tighter control over yield and surface consistency on the shop floor. Efficient integration for reduced downtime and cost Indexable formats like this one minimise setup time and spare-part inventory: changeovers become quick and repeatable, helping to lower productive downtime. The modest logistical overhead of replacing individual inserts rather than whole tools improves cost effectiveness over many production cycles. Expect a practical balance between performance and running costs, especially where frequent edge changes are required to maintain finish or tolerance. Clear terminology and practical benefits for production teams For those new to cutting-tool terminology: an indexable insert is a replaceable cutting tip fixed into a toolholder; grade denotes the carbide and coating specification that governs wear and toughness. The SDMT form factor provides a predictable engagement angle and a stable cutting edge, supporting repeatable cuts and straightforward inventory management. The SDMT09T312-DM YBM351 insert offers a pragmatic choice for operations seeking dependable edge life and straightforward handling. For application-specific recommendations or to procure SDMT inserts from ZCC-CT, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice and availability. Technical data Article number: SDMT09T312-DM YBM351 Manufacturer: ZCC-CT Material: carbide Numbers / Core technical data No numerical data provided in the dataset Special features / Versions Grade: YBM351 Insert type: SDMT ISO designation: SDMT09T312-DM Application: indexable insert / turning FAQ What materials is this insert intended for? The SDMT09T312-DM YBM351 insert from ZCC-CT is specified as a carbide indexable insert; material suitability depends on the chosen grade and machining parameters, so Metav Werkzeuge can advise on optimal applications for the YBM351 grade. How is the SDMT geometry beneficial for finishing operations? The SDMT geometry ensures consistent edge engagement and controlled chip evacuation, which improves surface finish and repeatability when the insert is used in appropriate turning setups. Can the insert be replaced quickly during production? Yes. As an indexable insert, the SDMT09T312-DM is designed for fast, repeatable replacement in standard toolholders, reducing downtime and easing spare-part logistics. Is technical support available for selecting the right grade and edge? Technical guidance is available; Metav Werkzeuge provides consulting on grade selection, edge preparation and cutting data to match the SDMT insert to the specific machining task. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts SDMT 09T312 from MetavCUT Brand: MetavCUT Manufacturer Order Number: SDMT09T312-Aluminium Facts for the tool: ISO-Code: SDMT09T312 Clearance Angle: 15° Angle: 90° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: square Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-SDMT-09T312-Aluminium-MetavCUT 40END