6.5mm Torx Screw M2.5, Angle 50° - Teknik Makina

Q: What is the thread size of this fastener?

The Teknik Makina Torx screw TC061TM is specified with an M2.5 metric thread for fine mechanical connections.

Q: Which driver fits the TC061TM?

The TC061TM is compatible with a hex key T8, enabling use with common T8 tooling for installation.

Q: What are the main dimensions to consider?

Key dimensions are a 3.5 mm head diameter, 6.5 mm overall length and a 50° head angle, which together determine seating and clearance requirements.

Q: Is the TC061TM suitable for confined or shallow spaces?

Yes, the short 6.5 mm length and compact 3.5 mm head diameter make the TC061TM appropriate for shallow fixings and restricted installation areas.

Q: Can this fastener be used in precision instrument assemblies?

The fine M2.5 thread and compact geometry make the TC061TM appropriate for many precision assemblies where small, reliable fastenings are required.

Liegende Schraube auf weißem Hintergrund.

Picture similar to product

€2.94

Accessory Items

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

€8.39

Product number: TC061TM

Product information "6.5mm Torx Screw M2.5, Angle 50° - Teknik Makina"

Combine secure M2.5 threading with a compact 6.5 mm overall length for reliable, space-saving fastening in precision assemblies; order the TC061TM Torx screw directly via Metav Werkzeuge or contact our consultants for application guidance.

Torx screw TC061TM – M2.5 thread, 3.5 mm diameter | Teknik Makina

The Torx screw TC061TM is a compact fastener engineered for fine mechanical assemblies and constrained installation spaces, suitable where small, precise fixings are required.

M2.5 metric thread for fine assemblies
3.5 mm head diameter for compact fit
6.5 mm overall length for shallow fixings
Compatible with hex key T8

Precise thread geometry for dependable connections

The compact fastener is designed around an M2.5 metric thread, which provides consistent engagement in small component housings and precision fixtures. A fine thread like M2.5 delivers predictable clamping force with reduced risk of loosening under light dynamic loads, making it well suited to instrument housings, control panels and delicate assemblies. The nominal head diameter of 3.5 mm and the short 6.5 mm overall length reduce protrusion and allow secure seating in shallow countersunk or through-hole applications. The specified 50° head-related angle supports secure torque transfer and consistent seating geometry when paired with compatible fastener seats. These dimensional details enable engineering teams to predict fit and tolerance behaviour and to integrate the fastener into CAD models and BOMs without ambiguity.

Tool compatibility and efficient assembly workflow

Installation efficiency is supported by a declared compatibility with hex key T8, so the fastener integrates smoothly with common workshop tool sets and automated assembly drives that accept T8 tooling. Where repeatable insertion speed and low-cycle torque control matter, the combination of compact dimensions and a standard driver interface speeds assembly and reduces handling time. For maintenance and disassembly procedures, the standardised drive size simplifies spare-part management. The screw’s lightweight specification (0.1 kg as an item reference) minimises additional mass in weight-sensitive assemblies and reduces transport and handling burdens when ordered in larger quantities. Clear specification of driver compatibility and dimensional parameters helps production planners select the correct feed and torque settings for reliable, repeatable results on the shop floor.

Sourcing confidence and fit-for-purpose supply

Sourced from Teknik Makina, the component is positioned for use in precision workshops and production environments where repeatability and part traceability matter. Procuring through Metav Werkzeuge adds the advantage of an established European distribution channel and a quality filter at the Emmerich hub, supporting reliable delivery and centralised purchasing for industrial buyers. The product’s concise dimensional set simplifies inventory classification and reduces the chance of installation errors: engineers and buyers can reference the M2.5 thread, 3.5 mm head diameter and 6.5 mm length when preparing assembly sheets or ordering spares. For applications that demand tight fitment and minimal clearance usage, this fastener offers a compact, industry-standard solution that aligns with efficient workshop logistics and quality-conscious procurement.

For precise small-component fastening, choose the Teknik Makina TC061TM and contact Metav Werkzeuge for tailored procurement support and specification advice.

Technical data

Article number: TC061TM
Manufacturer: Teknik Makina
SKU: TC061TM

Data

Diameter: 3.5 mm
Thread: M2.5
Overall length: 6.5 mm
Angle: 50°
Weight: 0.1 kg

Special features

Drive compatibility: hex key T8
Product type: Torx screw
Intended use: precision assemblies, shallow fixings
Origin: Teknik Makina

FAQ

What is the thread size of this fastener?
The Teknik Makina Torx screw TC061TM is specified with an M2.5 metric thread for fine mechanical connections.

Which driver fits the TC061TM?
The TC061TM is listed as compatible with a hex key T8, enabling use with common T8 tooling for installation.

What are the main dimensions to consider?
Key dimensions are 3.5 mm head diameter, 6.5 mm overall length and a 50° head angle, which together determine seating and clearance requirements.

Is the TC061TM suitable for confined or shallow spaces?
Yes — the short 6.5 mm length and compact 3.5 mm head diameter make the TC061TM appropriate for shallow fixings and restricted installation areas.

Can this fastener be used in precision instrument assemblies?
The fine M2.5 thread and compact geometry make the TC061TM appropriate for many precision assemblies where small, reliable fastenings are required.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "6.5mm Torx Screw M2.5, Angle 50° - Teknik Makina"

Designation:	Torx Schraube
Diameter-1:	3,5mm

Accessory Items

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

Compact, precise and purpose-built: the combination of a true T8 Torx profile and a lightweight 0.1 kg body ensures reliable engagement in confined assemblies; order the part directly via Metav Werkzeuge or consult the technical advisers if guidance is required. Torx key T8 — compact Torx hand key by Teknik Makina for precise Torx T8 engagement The Torx key T8 is an efficient hand tool for precise engagement with Torx T8 fasteners in tight or recessed assemblies, designed for routine workshop and maintenance tasks Precision T8 Torx tip for accurate engagement Compact design for confined spaces Lightweight at 0.1 kg for easy handling Precise engagement that reduces cam‑out and rework A defined Torx T8 profile provides a secure interface with the fastener head, which reduces the risk of rounding and cam‑out during assembly operations. The controlled geometry of the tip enables consistent torque transfer when used with manual operation, delivering measurable improvements in fastening reliability. For production or repair work where repeatable results matter, the precise drive profile supports faster cycle times and fewer rework loops compared with worn or improvised tools. Space‑saving form for demanding assembly environments The compact format of this hand key is intended for access in shallow bores, recessed fixings and electronics enclosures where clearance is limited. The reduced length and low mass make it simpler to manoeuvre in restricted spaces, improving accessibility without sacrificing engagement quality. This combination of compact design and secure tip geometry helps maintain assembly speed and reduces the time required to reach awkward fasteners, adding practical value in day‑to‑day workshop use. Practical specification and workshop suitability With a measured mass of 0.1 kg, the key offers tactile control and minimal operator fatigue during repetitive tasks. The tool is identified by SKU T8TM, enabling straightforward stock control and reordering. As a simple, hand‑operated solution the tool integrates cleanly into standard maintenance kits and tool rolls, providing a dependable, no‑frills method for handling Torx T8 fasteners across a range of common applications. For consistent, compact fastening use the Teknik Makina T8 Torx key — contact Metav Werkzeuge in Emmerich for procurement or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T8TM Torx size: T8 Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Compact design Precision Torx tip Hand tool, SKU T8TM FAQ What fastener size is compatible with this key? The key fits Torx T8 fasteners; the tool profile is manufactured for secure engagement with T8 heads. Is the tool suitable for confined or recessed fixings? Yes, the compact form factor is intended to provide access in confined spaces and shallow recesses. How is the item referenced for ordering and stock control? The product is listed under SKU T8TM, which should be used for procurement and inventory purposes. Can this key be stored in a standard workshop tool roll? The light weight and compact dimensions make the key well suited for inclusion in common workshop kits and tool rolls. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39