T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

Data inconsistency detected for SKU TC060TM: the item is listed as a Torx screw but the specified driver is "Inbussschlüssel T8" (Allen key T8), creating a conflict in the drive type. This discrepancy suggests a potential error in either the product classification or the associated tool specification, which could lead to confusion for customers or incorrect usage of the product. It is essential to cross-check the technical details, including the drive type and corresponding tool, to ensure accuracy and consistency in the product database. Please verify the product specifications thoroughly before a product description can be generated and published.

Take advantage of precise M2.5 threading, a compact 7 mm overall length and a defined 60° head angle for consistent driver engagement — ideal for tight assemblies and instrumentation; order the Torx screw directly via Metav Werkzeuge or consult our specialists if required. Torx screw TC063TM — M2.5 thread, 7 mm length (Teknik Makina) A Torx screw engineered for precision fastening in compact assemblies and instrument applications Torx head for secure torque transfer Thread M2.5 for fine metric engagement Diameter 3.5 mm for precision fit 60° head angle for controlled driver contact Precision fastening that reduces assembly rework This compact fastener delivers repeatable clamping through its M2.5 thread and narrow 3.5 mm diameter, designed for applications where space and tolerances are limited. The short 7 mm length reduces protrusion while maintaining sufficient engagement depth; this balance minimises the risk of part deformation or stripping during installation. The defined 60° head angle supports stable contact between driver and screw, contributing to predictable torque application and fewer assembly errors. Optimised for delicate and confined applications The small form factor of this Torx fastener suits electronics, instrumentation and other assemblies where clearance is at a premium. The compatibility with a T8 driver ensures a firm interface that translates rotational force into secure fastening with minimal cam‑out. In production environments, this results in faster cycle times and fewer rejects, enhancing overall process efficiency. Guidance on selecting the correct driver or torque setting is available from Metav Werkzeuge for integrations requiring particular fastening protocols. Confidence through industrial sourcing and support Specified and supplied by Teknik Makina, this Torx screw is classified under eClass 21189290, aligning with common procurement and inventory systems. Buying via Metav Werkzeuge gives access to a centralised stock point in Emmerich, a broad product range and long‑standing industry expertise — attributes that support reliable supply and traceable sourcing. For projects that demand consistency, choosing a standardised fastener from a recognised supplier reduces logistical complexity and supports predictable assembly quality. For reliable, compact fastening in precision assemblies, order the Teknik Makina Torx screw via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TC063TM Product: Torx screw Manufacturer: Teknik Makina Classification: eClass 21189290 Suitable driver: T8 Facts Diameter: 3.5 mm Thread: M2.5 Overall length: 7 mm Head angle: 60° Weight: 0.1 kg Special features Torx head design Metric fine thread Compact length for confined spaces Supplier classification for procurement systems FAQ Which driver fits this fastener? Compatible with a T8 driver; the interface is designed for secure torque transfer and reduced cam‑out with a T8 driver when using the Torx screw TC063TM from Teknik Makina. What are the key dimensions of the fastener? The Torx screw features a 3.5 mm diameter, M2.5 metric thread and a 7 mm overall length, with a 60° head angle suitable for controlled engagement. Is this a standard metric thread? Yes — the fastener uses an M2.5 metric thread, which is compatible with standard M2.5 tapped holes and nuts. For which applications is the screw most suitable? This compact Torx screw is intended for precision assemblies, electronics and instrument applications where minimal protrusion and reliable engagement are required. How does the head angle affect installation? The 60° head angle improves driver contact and helps to maintain consistent engagement during tightening, supporting repeatable assembly quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable fastening for compact assemblies: combine metric consistency and secure Torx drive with a slim profile and predictable torque behaviour for efficient, repeatable production. Order the Torx screw directly via Metav Werkzeuge or ask our consultants if needed. Torx screw TC064TM — M3 thread, Torx drive (Teknik Makina) The Torx screw is a compact M3 fastener designed for secure mechanical joins where space is limited and repeatability matters M3 metric thread, precision-formed 3.8 mm head diameter for compact fit Torx drive compatible with T8 key Compact design for confined assemblies The compact geometry of this fastener, with a M3 thread, a head diameter of 3.8 mm and a total length of 6.2 mm, delivers a small installation footprint while preserving clamping strength. In practice, the reduced head diameter allows components to be fastened close to edges or inside tight housings without imposing bulky clearances. The metric specification supports interchangeability with standard M3 components, making procurement and inventory simpler and reducing assembly errors. This combination of dimensions ensures a predictable fit and easy integration into product designs where space efficiency is essential. Torque control and reduced cam‑out with Torx drive Equipped with a Torx T8 drive, the fastener enables improved torque transfer compared with slotted or Phillips drives, which helps avoid stripping and ensures consistent tightening across production runs. The Torx geometry engages the driver over a larger surface area, reducing the risk of cam‑out and making manual or powered assembly more reliable. For operations that specify a torque setting, this drive form supports controlled torque application, leading to fewer reworks and a steadier assembly process. Compatibility with a standard T8 tool streamlines maintenance and tool selection on the shop floor. Consistent production quality for repeatable results Manufactured by Teknik Makina and listed under TC064TM, this fastener is produced to metric tolerances that support uniform performance in series production. The precision dimensions promote consistent clamping behaviour and predictable mechanical characteristics across batches, which is particularly valuable in small‑part assemblies and electronics where tight tolerances matter. Although no coating or material specification is provided in the basic data, the screw’s metric conformity and Torx drive make it a straightforward choice for engineers seeking a compact, reliable solution for repeatable fastening tasks. For reliable, metric fastenings from Teknik Makina, request TC064TM through Metav Werkzeuge — our team in Emmerich provides stock and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TC064TM Name: Torx screw Manufacturer: Teknik Makina Facts Weight: 0.1 kg Diameter: 3.8 mm Total length: 6.2 mm Angle: 60° Thread: M3 Special features Torx drive, compatible with T8 key Metric M3 thread Compact head diameter for tight spaces FAQ What thread does this screw use? The TC064TM is supplied with a M3 metric thread suitable for standard M3 mating parts. Which driver size is required for the Torx drive? The fastener uses a Torx T8 drive; a T8 tool engages the recess correctly. What are the main dimensions of the fastener? The product data shows a head diameter of 3.8 mm and a total length of 6.2 mm for the TC064TM Torx screw. Is the material or coating specified for this screw? No material or coating is specified in the provided technical data for this screw; the entry lists dimensions, thread form and drive type only. Is this fastener suitable for precision assemblies? Yes. The metric dimensions and Torx drive make TC064TM appropriate where compact size and repeatable torque control are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact fastener combining a M3 thread, a 55° countersunk head and a 5.3 mm head diameter ensures secure, flush-mounted joints in small assemblies; specified length 10 mm gives reliable clamping without excess protrusion. Order the Torx screw directly via Metav Werkzeuge or ask our consultants if needed. Torx screw — M3 × 10 mm, 55° countersunk head | Teknik Makina The Torx screw is a precision fastener for small assemblies that requires secure torque transfer and a flush, finished surface. M3 thread for compact assemblies 55° countersunk head for flush finish Compatible with Torx T15 key 10 mm overall length for tight joins Consistent torque transmission for reliable joints The Torx geometry is engineered to reduce cam‑out and to enable higher torque transfer compared with slotted or Phillips heads. With an M3 thread, this fastener is suitable for delicate mechanical assemblies and small equipment where thread engagement and repeatable clamping are essential. The internal drive geometry paired with the Torx T15 compatibility allows controlled tightening with torque drivers or hand keys, improving assembly repeatability and reducing the risk of fastener or tool wear. Flush mounting that preserves form and function A 55° countersunk head produces a discreet, level surface once installed; the specified 5.3 mm head diameter is sized to sit neatly in standard countersinks for small components. This design avoids protruding heads that catch on adjacent parts or interfere with sliding elements. For production and service technicians, the result is both a tidy aesthetic and a functional advantage: smoother assemblies and fewer clearance issues during operation. Straightforward specification and workshop compatibility The overall length of 10 mm and the M3 thread simplify part selection and stock management for repeat jobs and maintenance. The fastener is compatible with common Torx tools, streamlining assembly processes across different workstations. Clear specification reduces ordering uncertainty and shortens setup times on production lines, providing a pragmatic efficiency benefit for workshops and small series manufacturers. Proven sourcing and dependable supply for industry use Supplied by Teknik Makina, the fastener reflects industry‑grade production standards suitable for routine and precision applications. Sourcing through a trusted distributor ensures consistent availability and quality control, supporting uninterrupted workflows. Metav’s role as a quality filter for the European market further underlines dependable logistics and expert procurement support for workshop and industrial customers. For technical guidance on suitability or to secure Teknik Makina Torx screws via Metav Werkzeuge — contact the Metav sales team for expert advice and precise delivery from Emmerich Technical data SKU: TC066TM ECLASS: 21189290 Brand: Teknik Makina Article: Torx screw Facts Weight: 0.1 kg Diameter: 5.3 mm Thread: M3 Overall length: 10 mm Angle: 55° Special features Compatible with Torx T15 key 55° countersunk head Fastener type: Torx screw Intended for small assemblies FAQ What drive tool fits this screw? The screw is compatible with a Torx T15 drive; Teknik Makina specifies Torx T15 for reliable engagement and torque transfer (SKU TC066TM). Is the head suitable for countersinking? Yes. The 55° head angle provides a countersunk geometry designed for a flush finish when installed in a matched countersink. What sizes and thread form does this fastener use? This fastener is specified with an M3 thread, a 5.3 mm head diameter and an overall length of 10 mm as indicated for small‑scale assemblies. Can this screw be used in precision equipment? Its Torx drive and M3 thread make the screw appropriate for precision and small mechanical assemblies where controlled torque and repeatable clamping are required. Who manufactures this screw and who handles distribution? Teknik Makina is the manufacturer; distribution and procurement for European customers are handled via Metav Werkzeuge with reliable delivery from Emmerich. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine secure M2.5 threading with a compact 6.5 mm overall length for reliable, space-saving fastening in precision assemblies; order the TC061TM Torx screw directly via Metav Werkzeuge or contact our consultants for application guidance. Torx screw TC061TM – M2.5 thread, 3.5 mm diameter | Teknik Makina The Torx screw TC061TM is a compact fastener engineered for fine mechanical assemblies and constrained installation spaces, suitable where small, precise fixings are required. M2.5 metric thread for fine assemblies 3.5 mm head diameter for compact fit 6.5 mm overall length for shallow fixings Compatible with hex key T8 Precise thread geometry for dependable connections The compact fastener is designed around an M2.5 metric thread, which provides consistent engagement in small component housings and precision fixtures. A fine thread like M2.5 delivers predictable clamping force with reduced risk of loosening under light dynamic loads, making it well suited to instrument housings, control panels and delicate assemblies. The nominal head diameter of 3.5 mm and the short 6.5 mm overall length reduce protrusion and allow secure seating in shallow countersunk or through-hole applications. The specified 50° head-related angle supports secure torque transfer and consistent seating geometry when paired with compatible fastener seats. These dimensional details enable engineering teams to predict fit and tolerance behaviour and to integrate the fastener into CAD models and BOMs without ambiguity. Tool compatibility and efficient assembly workflow Installation efficiency is supported by a declared compatibility with hex key T8, so the fastener integrates smoothly with common workshop tool sets and automated assembly drives that accept T8 tooling. Where repeatable insertion speed and low-cycle torque control matter, the combination of compact dimensions and a standard driver interface speeds assembly and reduces handling time. For maintenance and disassembly procedures, the standardised drive size simplifies spare-part management. The screw’s lightweight specification (0.1 kg as an item reference) minimises additional mass in weight-sensitive assemblies and reduces transport and handling burdens when ordered in larger quantities. Clear specification of driver compatibility and dimensional parameters helps production planners select the correct feed and torque settings for reliable, repeatable results on the shop floor. Sourcing confidence and fit-for-purpose supply Sourced from Teknik Makina, the component is positioned for use in precision workshops and production environments where repeatability and part traceability matter. Procuring through Metav Werkzeuge adds the advantage of an established European distribution channel and a quality filter at the Emmerich hub, supporting reliable delivery and centralised purchasing for industrial buyers. The product’s concise dimensional set simplifies inventory classification and reduces the chance of installation errors: engineers and buyers can reference the M2.5 thread, 3.5 mm head diameter and 6.5 mm length when preparing assembly sheets or ordering spares. For applications that demand tight fitment and minimal clearance usage, this fastener offers a compact, industry-standard solution that aligns with efficient workshop logistics and quality-conscious procurement. For precise small-component fastening, choose the Teknik Makina TC061TM and contact Metav Werkzeuge for tailored procurement support and specification advice. Technical data Article number: TC061TM Manufacturer: Teknik Makina SKU: TC061TM Data Diameter: 3.5 mm Thread: M2.5 Overall length: 6.5 mm Angle: 50° Weight: 0.1 kg Special features Drive compatibility: hex key T8 Product type: Torx screw Intended use: precision assemblies, shallow fixings Origin: Teknik Makina FAQ What is the thread size of this fastener? The Teknik Makina Torx screw TC061TM is specified with an M2.5 metric thread for fine mechanical connections. Which driver fits the TC061TM? The TC061TM is listed as compatible with a hex key T8, enabling use with common T8 tooling for installation. What are the main dimensions to consider? Key dimensions are 3.5 mm head diameter, 6.5 mm overall length and a 50° head angle, which together determine seating and clearance requirements. Is the TC061TM suitable for confined or shallow spaces? Yes — the short 6.5 mm length and compact 3.5 mm head diameter make the TC061TM appropriate for shallow fixings and restricted installation areas. Can this fastener be used in precision instrument assemblies? The fine M2.5 thread and compact geometry make the TC061TM appropriate for many precision assemblies where small, reliable fastenings are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact combination of a Torx drive, an M3 thread and a precise 4.2 mm diameter for secure, repeatable fastening in confined assemblies; order directly via Metav Werkzeuge or request consultancy if technical clarification is required Torx screw TC065TM — M3 thread, 7 mm length by Teknik Makina A Torx screw designed for small, high-torque assemblies where a T8 drive and a short 7 mm shank deliver reliable clamping in limited spaces M3 thread for standard metric fastening Torx drive for high torque transfer 4.2 mm diameter for precision fit Consistent clamping where space is limited The M3 thread combined with a 7 mm overall length provides a compact fastening solution suited to assemblies with restricted depth. Specified dimensions allow predictable engagement in thin panels and small components, reducing the risk of over‑penetration and ensuring repeatable clamp force. Where assembly tolerances matter, the screw’s nominal 4.2 mm diameter supports a snug fit through drilled or preformed holes, helping to maintain positional accuracy in production runs. Efficient torque transmission with Torx drive A Torx head geometry delivers substantially improved torque transmission compared with slotted or Phillips alternatives. The internal star profile minimises cam‑out and enables higher tightening values using a T8 key, which promotes faster assembly cycles and reduces tool wear. For operations that prioritise process efficiency, this drive style supports consistent torque application, lowering the rate of rework and enhancing joint reliability. Thread reliability and material handling Metric thread form M3 is a recognised standard across industrial and electronic applications; it simplifies parts selection and streamlines inventory management. The screw’s thread specification supports positive engagement with common mating materials and inserts, helping to protect thread integrity under repeated assembly and disassembly. Where vibration resistance and mechanical stability are required, this metric fastener provides a well‑understood basis for designing secure joints. Suitable uses and practical benefits This fastener is ideal for compact mechanical assemblies, small housings, electronic enclosures and precision brackets. The short length and Torx drive make it particularly appropriate for assembly processes where space and access are constrained. Using a standard Torx key improves ergonomics for operators and decreases cycle time, while the clear dimensional data allows planners to calculate tolerances and interference fits reliably. Supply reliability and quality assurance from Metav Sourced from Teknik Makina and distributed via Metav Werkzeuge, the component aligns with procurement strategies that favour availability and consistent quality. Centralised sourcing through Metav reduces vendor complexity and helps maintain uninterrupted supply to the workbench. For technical clarification or to confirm compatibility with specific assemblies, Metav’s team can provide guidance and further specifications. Contact Metav Werkzeuge for supply information or technical advice on the Teknik Cutting Tools Torx screw TC065TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC065TM Manufacturer: Teknik Makina eClass: 21189290 Facts Weight: 0.1 kg Diameter: 4.2 mm Thread: M3 Overall length: 7 mm Angle: 60° Special features Torx drive Suitable for T8 Torx key Compact length for limited installation depth Suitable for precision assemblies FAQ What is the thread size of this fastener? The fastener uses an M3 metric thread, providing a standardised engagement suitable for many small engineering and electronic applications. Which driver is required to tighten the screw? A T8 Torx key is specified for this Torx screw, enabling secure torque transfer and minimising cam‑out during assembly. Is the screw suitable for use in tight or shallow housings? Yes, the short 7 mm overall length is intended for confined installation spaces where a compact fastener is required. Who supplies this component and where can further technical details be obtained? The part is supplied by Teknik Makina and distributed via Metav Werkzeuge; additional technical data and procurement assistance are available from Metav. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact fastening solution that combines precise thread geometry and a short overall length for reliable cutter clamping; order or request procurement advice via Metav Werkzeuge for seamless supply and technical matching. Screw for End Mill — M3 thread, 7 mm overall length (Teknik Makina) The Screw for End Mill is a compact fastening component designed to secure milling cutters and their holders in CNC and tooling applications. M3 thread for secure fastening 7 mm overall length for compact assemblies Compatible with T8 Allen key for easy tightening 4.2 mm head diameter for standard clamping pockets Stable clamping for improved tool performance A precise M3 thread combined with a short 7 mm overall length delivers a compact fastening that keeps toolholders firmly seated. This reduces micro-movement during operation, which helps to maintain repeatable cutting geometry and lowers the risk of premature edge wear in both roughing and finishing passes. The design supports efficient changeovers in high-mix CNC environments by providing a predictable clamping behaviour that operators and maintenance teams can rely on. Straightforward fitting with standard tools and holders Compatibility with a T8 Allen key simplifies installation and torque application in workshop settings. The screw’s 4.2 mm head diameter matches common insert and clamping-pocket dimensions found on many end mill assemblies, making it suitable for routine replacements and maintenance tasks. Reference TC170TM when ordering or checking drawings to ensure the fastener matches existing toolholder threads and pocket sizes. Inventory and procurement made practical Lightweight and compact, this fastening component is easy to store and manage as part of a spares kit. Sourcing through a stable distributor reduces downtime risk: Metav’s European stock and logistics model offer a transparent supply chain and the option to consolidate multiple tooling items in one order. The combination of a standard thread form and widely used actuation method means fewer special tools and less administrative overhead for purchasing and stores management. For availability, compatibility checks or to procure the Teknik Makina fastening screw TC170TM directly from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical advice and order processing. Technical data Article number: TC170TM Manufacturer: Teknik Makina Thread: M3 Head diameter: 4.2 mm Overall length: 7 mm Weight: 0.1 kg Suitable for: end mill assemblies Tool for fitting: T8 Allen key FAQ What is the thread size of this fastening screw? The fastening screw uses an M3 thread, specified on the technical listing for the Screw for End Mill (TC170TM) from Teknik Makina. Which tool is needed to tighten the screw? A T8 Allen key is indicated for installation and tightening of the screw supplied as Screw for End Mill TC170TM. Will this screw fit standard end mill clamping pockets? The screw’s 4.2 mm head diameter and M3 thread are intended for commonly used clamping pockets; confirm dimensions against the toolholder drawing and reference TC170TM when checking compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com