7mm Torx Screw T8 Hex Key Compatible, M2.5 Thread, 60° Head Angle - Teknik Makina

Q: What are the key dimensions of the fastener?

The Torx screw TC063TM features a 3.5 mm diameter, M2.5 metric thread and a 7 mm overall length, with a 60° head angle suitable for controlled engagement.

Liegende Schraube auf weißem Hintergrund.

Picture similar to product

€2.94

Accessory Items

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

€8.39

Product number: TC063TM

Product information "7mm Torx Screw T8 Hex Key Compatible, M2.5 Thread, 60° Head Angle - Teknik Makina"

Take advantage of precise M2.5 threading, a compact 7 mm overall length and a defined 60° head angle for consistent driver engagement — ideal for tight assemblies and instrumentation; order the Torx screw directly via Metav Werkzeuge or consult our specialists if required.

Torx screw TC063TM — M2.5 thread, 7 mm length (Teknik Makina)

A Torx screw engineered for precision fastening in compact assemblies and instrument applications

Torx head for secure torque transfer
Thread M2.5 for fine metric engagement
Diameter 3.5 mm for precision fit
60° head angle for controlled driver contact

Precision fastening that reduces assembly rework

This compact fastener delivers repeatable clamping through its M2.5 thread and narrow 3.5 mm diameter, designed for applications where space and tolerances are limited. The short 7 mm length reduces protrusion while maintaining sufficient engagement depth; this balance minimises the risk of part deformation or stripping during installation. The defined 60° head angle supports stable contact between driver and screw, contributing to predictable torque application and fewer assembly errors.

Optimised for delicate and confined applications

The small form factor of this Torx fastener suits electronics, instrumentation and other assemblies where clearance is at a premium. The compatibility with a T8 driver ensures a firm interface that translates rotational force into secure fastening with minimal cam‑out. In production environments, this results in faster cycle times and fewer rejects, enhancing overall process efficiency. Guidance on selecting the correct driver or torque setting is available from Metav Werkzeuge for integrations requiring particular fastening protocols.

Confidence through industrial sourcing and support

Specified and supplied by Teknik Makina, this Torx screw is classified under eClass 21189290, aligning with common procurement and inventory systems. Buying via Metav Werkzeuge gives access to a centralised stock point in Emmerich, a broad product range and long‑standing industry expertise — attributes that support reliable supply and traceable sourcing. For projects that demand consistency, choosing a standardised fastener from a recognised supplier reduces logistical complexity and supports predictable assembly quality.

For reliable, compact fastening in precision assemblies, order the Teknik Makina Torx screw via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930

Technical data

Article number: TC063TM
Product: Torx screw
Manufacturer: Teknik Makina
Classification: eClass 21189290
Suitable driver: T8

Facts

Diameter: 3.5 mm
Thread: M2.5
Overall length: 7 mm
Head angle: 60°
Weight: 0.1 kg

Special features

Torx head design
Metric fine thread
Compact length for confined spaces
Supplier classification for procurement systems

FAQ

Which driver fits this fastener?
Compatible with a T8 driver; the interface is designed for secure torque transfer and reduced cam‑out with a T8 driver when using the Torx screw TC063TM from Teknik Makina.

What are the key dimensions of the fastener?
The Torx screw features a 3.5 mm diameter, M2.5 metric thread and a 7 mm overall length, with a 60° head angle suitable for controlled engagement.

Is this a standard metric thread?
Yes — the fastener uses an M2.5 metric thread, which is compatible with standard M2.5 tapped holes and nuts.

For which applications is the screw most suitable?
This compact Torx screw is intended for precision assemblies, electronics and instrument applications where minimal protrusion and reliable engagement are required.

How does the head angle affect installation?
The 60° head angle improves driver contact and helps to maintain consistent engagement during tightening, supporting repeatable assembly quality.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "7mm Torx Screw T8 Hex Key Compatible, M2.5 Thread, 60° Head Angle - Teknik Makina"

Designation:	Torx Schraube
Diameter-1:	3,5mm

Accessory Items

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

Compact, precise and purpose-built: the combination of a true T8 Torx profile and a lightweight 0.1 kg body ensures reliable engagement in confined assemblies; order the part directly via Metav Werkzeuge or consult the technical advisers if guidance is required. Torx key T8 — compact Torx hand key by Teknik Makina for precise Torx T8 engagement The Torx key T8 is an efficient hand tool for precise engagement with Torx T8 fasteners in tight or recessed assemblies, designed for routine workshop and maintenance tasks Precision T8 Torx tip for accurate engagement Compact design for confined spaces Lightweight at 0.1 kg for easy handling Precise engagement that reduces cam‑out and rework A defined Torx T8 profile provides a secure interface with the fastener head, which reduces the risk of rounding and cam‑out during assembly operations. The controlled geometry of the tip enables consistent torque transfer when used with manual operation, delivering measurable improvements in fastening reliability. For production or repair work where repeatable results matter, the precise drive profile supports faster cycle times and fewer rework loops compared with worn or improvised tools. Space‑saving form for demanding assembly environments The compact format of this hand key is intended for access in shallow bores, recessed fixings and electronics enclosures where clearance is limited. The reduced length and low mass make it simpler to manoeuvre in restricted spaces, improving accessibility without sacrificing engagement quality. This combination of compact design and secure tip geometry helps maintain assembly speed and reduces the time required to reach awkward fasteners, adding practical value in day‑to‑day workshop use. Practical specification and workshop suitability With a measured mass of 0.1 kg, the key offers tactile control and minimal operator fatigue during repetitive tasks. The tool is identified by SKU T8TM, enabling straightforward stock control and reordering. As a simple, hand‑operated solution the tool integrates cleanly into standard maintenance kits and tool rolls, providing a dependable, no‑frills method for handling Torx T8 fasteners across a range of common applications. For consistent, compact fastening use the Teknik Makina T8 Torx key — contact Metav Werkzeuge in Emmerich for procurement or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T8TM Torx size: T8 Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Compact design Precision Torx tip Hand tool, SKU T8TM FAQ What fastener size is compatible with this key? The key fits Torx T8 fasteners; the tool profile is manufactured for secure engagement with T8 heads. Is the tool suitable for confined or recessed fixings? Yes, the compact form factor is intended to provide access in confined spaces and shallow recesses. How is the item referenced for ordering and stock control? The product is listed under SKU T8TM, which should be used for procurement and inventory purposes. Can this key be stored in a standard workshop tool roll? The light weight and compact dimensions make the key well suited for inclusion in common workshop kits and tool rolls. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39