6.2mm Torx Screw M3 60° Head, T8 Hex Key Compatible - Teknik Makina

Q: What thread does this screw use?

The TC064TM is supplied with an M3 metric thread suitable for standard M3 mating parts.

Q: Which driver size is required for the Torx drive?

The fastener uses a Torx T8 drive; a T8 tool engages the recess correctly.

Q: What are the main dimensions of the fastener?

The head diameter is 3.8 mm and the total length is 6.2 mm for the TC064TM Torx screw.

Liegende Schraube auf weißem Hintergrund.

Picture similar to product

€2.94

Accessory Items

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

€8.39

Product number: TC064TM

Product information "6.2mm Torx Screw M3 60° Head, T8 Hex Key Compatible - Teknik Makina"

Reliable fastening for compact assemblies: combine metric consistency and secure Torx drive with a slim profile and predictable torque behaviour for efficient, repeatable production. Order the Torx screw directly via Metav Werkzeuge or ask our consultants if needed.

Torx screw TC064TM — M3 thread, Torx drive (Teknik Makina)

The Torx screw is a compact M3 fastener designed for secure mechanical joins where space is limited and repeatability matters

M3 metric thread, precision-formed
3.8 mm head diameter for compact fit
Torx drive compatible with T8 key

Compact design for confined assemblies

The compact geometry of this fastener, with a M3 thread, a head diameter of 3.8 mm and a total length of 6.2 mm, delivers a small installation footprint while preserving clamping strength. In practice, the reduced head diameter allows components to be fastened close to edges or inside tight housings without imposing bulky clearances. The metric specification supports interchangeability with standard M3 components, making procurement and inventory simpler and reducing assembly errors. This combination of dimensions ensures a predictable fit and easy integration into product designs where space efficiency is essential.

Torque control and reduced cam‑out with Torx drive

Equipped with a Torx T8 drive, the fastener enables improved torque transfer compared with slotted or Phillips drives, which helps avoid stripping and ensures consistent tightening across production runs. The Torx geometry engages the driver over a larger surface area, reducing the risk of cam‑out and making manual or powered assembly more reliable. For operations that specify a torque setting, this drive form supports controlled torque application, leading to fewer reworks and a steadier assembly process. Compatibility with a standard T8 tool streamlines maintenance and tool selection on the shop floor.

Consistent production quality for repeatable results

Manufactured by Teknik Makina and listed under TC064TM, this fastener is produced to metric tolerances that support uniform performance in series production. The precision dimensions promote consistent clamping behaviour and predictable mechanical characteristics across batches, which is particularly valuable in small‑part assemblies and electronics where tight tolerances matter. Although no coating or material specification is provided in the basic data, the screw’s metric conformity and Torx drive make it a straightforward choice for engineers seeking a compact, reliable solution for repeatable fastening tasks.

For reliable, metric fastenings from Teknik Makina, request TC064TM through Metav Werkzeuge — our team in Emmerich provides stock and ordering support at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

Article number: TC064TM
Name: Torx screw
Manufacturer: Teknik Makina

Facts

Weight: 0.1 kg
Diameter: 3.8 mm
Total length: 6.2 mm
Angle: 60°
Thread: M3

Special features

Torx drive, compatible with T8 key
Metric M3 thread
Compact head diameter for tight spaces

FAQ

What thread does this screw use?
The TC064TM is supplied with a M3 metric thread suitable for standard M3 mating parts.

Which driver size is required for the Torx drive?
The fastener uses a Torx T8 drive; a T8 tool engages the recess correctly.

What are the main dimensions of the fastener?
The product data shows a head diameter of 3.8 mm and a total length of 6.2 mm for the TC064TM Torx screw.

Is the material or coating specified for this screw?
No material or coating is specified in the provided technical data for this screw; the entry lists dimensions, thread form and drive type only.

Is this fastener suitable for precision assemblies?
Yes. The metric dimensions and Torx drive make TC064TM appropriate where compact size and repeatable torque control are priorities.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "6.2mm Torx Screw M3 60° Head, T8 Hex Key Compatible - Teknik Makina"

Designation:	Torx Schraube
Diameter-1:	3,8mm

Accessory Items

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

Compact, precise and purpose-built: the combination of a true T8 Torx profile and a lightweight 0.1 kg body ensures reliable engagement in confined assemblies; order the part directly via Metav Werkzeuge or consult the technical advisers if guidance is required. Torx key T8 — compact Torx hand key by Teknik Makina for precise Torx T8 engagement The Torx key T8 is an efficient hand tool for precise engagement with Torx T8 fasteners in tight or recessed assemblies, designed for routine workshop and maintenance tasks Precision T8 Torx tip for accurate engagement Compact design for confined spaces Lightweight at 0.1 kg for easy handling Precise engagement that reduces cam‑out and rework A defined Torx T8 profile provides a secure interface with the fastener head, which reduces the risk of rounding and cam‑out during assembly operations. The controlled geometry of the tip enables consistent torque transfer when used with manual operation, delivering measurable improvements in fastening reliability. For production or repair work where repeatable results matter, the precise drive profile supports faster cycle times and fewer rework loops compared with worn or improvised tools. Space‑saving form for demanding assembly environments The compact format of this hand key is intended for access in shallow bores, recessed fixings and electronics enclosures where clearance is limited. The reduced length and low mass make it simpler to manoeuvre in restricted spaces, improving accessibility without sacrificing engagement quality. This combination of compact design and secure tip geometry helps maintain assembly speed and reduces the time required to reach awkward fasteners, adding practical value in day‑to‑day workshop use. Practical specification and workshop suitability With a measured mass of 0.1 kg, the key offers tactile control and minimal operator fatigue during repetitive tasks. The tool is identified by SKU T8TM, enabling straightforward stock control and reordering. As a simple, hand‑operated solution the tool integrates cleanly into standard maintenance kits and tool rolls, providing a dependable, no‑frills method for handling Torx T8 fasteners across a range of common applications. For consistent, compact fastening use the Teknik Makina T8 Torx key — contact Metav Werkzeuge in Emmerich for procurement or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T8TM Torx size: T8 Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Compact design Precision Torx tip Hand tool, SKU T8TM FAQ What fastener size is compatible with this key? The key fits Torx T8 fasteners; the tool profile is manufactured for secure engagement with T8 heads. Is the tool suitable for confined or recessed fixings? Yes, the compact form factor is intended to provide access in confined spaces and shallow recesses. How is the item referenced for ordering and stock control? The product is listed under SKU T8TM, which should be used for procurement and inventory purposes. Can this key be stored in a standard workshop tool roll? The light weight and compact dimensions make the key well suited for inclusion in common workshop kits and tool rolls. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39