Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
9.52mm Gauge Pin ±0.001mm Precision, 50mm Workshop Version - Metav IndustryLine
Take advantage of workshop-grade accuracy and a compact design: the single gauge pin delivers a tight tolerance of ±0.001 mm on a 9.52 mm diameter with a 50 mm working length, ensuring reproducible end‑measure checks and fixture set‑up. Order the pin directly via Metav Werkzeuge or contact our consultants for specification advice. Gauge pin M323.952, single — 9.52 mm ±0.001 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.952 for precise end‑measure verification in workshop inspection and fixture set‑up. Workshop‑grade execution Tolerance ±0.001 mm Diameter 9.52 mm for end‑measure checks Length 50 mm in special steel Reduce inspection uncertainty with micrometre‑level control The gauge pin M323.952 provides a ±0.001 mm tolerance, equivalent to 1 micrometre, which significantly narrows measurement uncertainty in routine checks. Such precision converts into faster acceptance decisions on the shop floor: measuring cores, bores and mating parts becomes a reproducible reference, lowering scrap rates and rework. The marked dimensional stability supports repeatable results when used as a master reference in setting gauges or verifying plug fits. Robust material for consistent long‑term performance Manufactured from special steel, this single‑piece pin combines surface hardness with resistance to everyday workshop wear. The material choice reduces profile change from handling and contact, so the functional diameter remains stable over many inspection cycles. A compact mass and balanced geometry minimise flex during insertion, giving consistent contact and reliable size checks across repeated measurements. Compact length and form for versatile workshop use With a working length of 50 mm and a precise 9.52 mm diameter, the pin is tailored for end‑measure tasks where reach and rigidity are both required. The moderate length keeps the pin easy to handle while providing enough engagement to verify bore depth and seating surfaces. The workshop execution prioritises practical handling and durability, making it suitable for maintenance benches, toolrooms and quality control stations. Practical applications and integration into measurement routines This test pin excels as a reference for bore gauging, fixture set‑up and checking mating parts during assembly. When used alongside standard measuring tools, it provides a fixed datum for comparative checks and process validation. The simple geometry also supports quick visual inspection of surface condition and aids in preparing go/no‑go assessments without complex fixtures, streamlining inspection steps and improving throughput. Secure component conformity in production with Metav IndustryLine's precision gauge pin and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich Technical data Article number: M323.952 GTIN: 4061905065873 Label: Prüfstift, einzeln, 9,52mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.52 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.032 kg Special features Material: Special steel Workshop execution Single‑piece gauge pin ECLASS: 21170231 FAQ What accuracy does the gauge pin offer? The Metav IndustryLine gauge pin M323.952 provides a tolerance of ±0.001 mm, enabling micrometre‑level checks for end‑measure and bore verification. Which materials is this test pin suitable for checking? The M323.952 is a hard special steel pin designed as a dimensional reference; it is used to verify the geometry of bores and mating parts rather than for material-specific cutting or shaping. How is the pin typically used in a workshop? In workshop practice the gauge pin is inserted into bores for end‑measure checks, used as a reference for setting gauges, and incorporated into fixture set‑up routines to ensure consistent mating and alignment. Does this product require special handling to preserve accuracy? Routine handling with care and storage in a clean environment preserves the dimensional stability of the gauge pin M323.952; avoid strong impacts and extended exposure to corrosive atmospheres. Is the product suitable for use as a master in comparative measurements? Yes, the single‑piece design and tight tolerance of the M323.952 make it suitable as a master reference for comparative checks and for verifying gauge settings in quality control workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.53mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the combination of extreme dimensional stability and reliable workshop construction to reduce inspection time and rework. The close tolerance of ±0.001 mm together with a compact 50 mm length ensures repeatable end‑measurement references. Order the test pin directly via Metav Werkzeuge or ask our consultants for application advice. M323.953 test pin — 9.53 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The M323.953 test pin is a precision gauge pin for end‑measurement and reference checks in workshop and quality‑inspection environments. *High precision ±0.001 mm tolerance *Diameter 9.53 mm for end‑measure checks *Workshop‑grade special steel construction *Compact 50 mm length for tight spaces Dependable dimensional reference to reduce rework A tight tolerance of ±0.001 mm places this gauge in the category of high‑precision reference tools, suitable where minimal deviation matters. Using a pin with a nominal 9.53 mm diameter and micrometre‑level repeatability means fewer measurement iterations and more reliable pass/fail decisions during final inspection. The declared accuracy supports traceable checks and reduces the risk of production escapes, so acceptance criteria can be applied with confidence and inspection throughput improves. Robust design for everyday workshop use Constructed from special steel and specified as a workshop‑grade item, the pin tolerates regular handling and routine use on the shop floor without compromising geometry. The 50 mm length and compact form factor make it practical for confined setups and for use as an end‑stop reference in fixtures. Low mass (approx. 0.032 kg) aids quick alignment and handling during repetitive checks while the material choice supports wear resistance for prolonged service life. Easy to integrate into inspection workflows Designed as a straightforward reference instrument, the pin is ideal for end‑measurement tasks, plug checks and comparative calibration against master gauges. Marked traceability (GTIN available) and a clear article identifier facilitate inventory and process control in the measuring room. As a simple, stable reference, it pairs well with dial indicators, height gauges and bench comparators to create a compact control loop that prioritises speed and reproducibility in routine quality checks. For workshop‑grade precision and application support, contact Metav Werkzeuge in Emmerich to discuss the M323.953 test pin and its suitability for specific end‑measurement tasks; technical advice is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.953 GTIN: 4061905065880 Category: Gauge pins Facts Diameter: 9.53 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.032 kg Special features Material: Special steel Design: Workshop execution Application: End‑measurement / reference checks FAQ What level of precision does this test pin offer? The M323.953 test pin provides a precision of ±0.001 mm, making the Metav IndustryLine pin suitable for high‑accuracy end‑measurement and reference tasks. Can this pin be used in confined or recessed features? Yes; the compact 50 mm length and small mass allow the pin to be used in tight spaces and as a reference in fixtures for inner or end‑face measurements. Which materials and instruments pair well with the pin for inspection? The pin works well with dial indicators, height gauges and bench comparators; its special steel construction provides wear resistance appropriate for workshop use. How is the product identified for inventory and traceability? Identification is possible via the article number M323.953 and GTIN 4061905065880, which supports catalogue management and stock control. Is the M323.953 intended for daily shop‑floor use? Yes; specified as a workshop execution, the pin is designed for regular handling and routine measurement tasks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.55mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Precision pin combining sub‑micron tolerance, resilient special‑steel construction and transport‑safe packaging for reliable end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Pin gauge M323.955 — 9.55 mm, ±0.001 mm test pin (50 mm length) by Metav IndustryLine The Pin gauge M323.955 is a single precision test pin designed for end‑measurement, calibration checks and bore verification in workshop and production environments. Sub‑micron tolerance ±0.001 mm Nominal diameter 9.55 mm 50 mm robust special steel body Delivered in transport protective case Consistent accuracy for production and inspection Manufactured to an exacting tolerance of ±0.001 mm, this precision pin guarantees repeatable results when checking critical diameters and end fits on small to medium components. The 9.55 mm nominal diameter is finished to minimise form error, so the pin can be used as a reliable reference in measurement chains and gauge sets. By reducing measurement uncertainty, the component inspection process becomes more efficient and less dependent on operator feel — a clear rational advantage for quality control and shop‑floor metrology. Robust material and compact handling for daily use The body is made from special steel chosen for wear resistance and dimensional stability under normal workshop use. With a length of 50 mm and a low mass, the pin balances stiffness and manoeuvrability; handling is straightforward during insertion into bores or when used as a reference for end‑measurements. The compact design keeps the risk of bending small while offering a tactile, robust feel in hand, which supports faster inspection cycles without sacrificing precision. Practical applications and workshop readiness As a single test pin in a workshop version, this item is ideal for end‑dimension checks, assembly verification and as a calibration reference in jigs and fixtures. The combination of fine tolerance and a hardened surface makes the component suitable for frequent measuring tasks where repeatability matters. Supplied as an individual piece, it integrates easily into existing gauge sets and inspection routines, enhancing process reliability with a straightforward, durable tool. Quality assurance and transport protection Supplied in a protective transport case, the pin arrives ready for immediate use and safe storage between inspections. The packing prevents damage during transit and reduces the chance of inadvertent surface wear before first use. Backed by Metav IndustryLine’s quality standards and distribution from Emmerich, the product supports dependable supply and straightforward reordering for production environments that demand consistent measurement performance. For precise end‑measurement tasks using Metav IndustryLine components, contact Metav Werkzeuge for technical clarification or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.955 GTIN: 4061905061332 Label: Prüfstift, einzeln, 9,55mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.55 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.032 kg Single item supply: one piece Special features Material: special steel Workshop version (robust design) Delivered in protective transport case Intended use: end‑measurement / bore verification FAQ What tolerance can be expected from this test pin? The pin gauge M323.955 is finished to a nominal tolerance of ±0.001 mm, providing sub‑micron repeatability suitable for precise end‑measure checks. Which material is the pin made from and why? This test pin is manufactured from special steel, selected for wear resistance and dimensional stability to ensure sustained accuracy in routine workshop inspections. Is the pin supplied ready for safe transport and storage? Yes, the item is delivered in a protective transport case to prevent damage during shipping and to preserve the calibrated surface finish prior to use. For which applications is this precision pin recommended? Use the M323.955 for end‑dimension checks, bore verification, assembly fit checks and as a reference in gauge sets and fixtures where tight tolerances are required. Can the pin be integrated into existing gauge sets? The single‑piece supply and standard diameter make the pin straightforward to include in existing gauge assemblies or inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.56mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ultra‑fine ±0.001 mm tolerance and a compact 50 mm gauge length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application support. M323.956 gauge pin — 9.56 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A M323.956 gauge pin designed for precision end‑measure checks and reference tasks in workshop and production metrology. Precision diameter 9.56 mm, tolerance ±0.001 mm Solid special‑steel construction, length 50 mm Workshop version with ground measuring surfaces Supplied individually, ideal for end‑measure checks Accurate dimensional reference that speeds inspection and reduces rework The compact pin provides a stable, precision reference for quick go/no‑go assessments and setting devices on the production floor. With a nominal diameter of 9.56 mm and an accuracy grade of ±0.001 mm, the pin minimises inspection uncertainty and shortens gauging cycles. The high dimensional fidelity supports tighter process control, which translates into fewer corrective operations and smoother production flow. The reduced need for secondary checks is a direct efficiency gain for workshop quality routines. Durable construction for repeatable measurements over time Manufactured from special steel, the pin is engineered for consistent performance in everyday workshop conditions. The 50 mm length offers sufficient engagement depth for reliable end‑measure checks while remaining easy to handle. Ground measuring faces and a workshop‑oriented finish contribute to long‑term repeatability, keeping wear‑induced deviation low. The combination of robust material and precise machining preserves the pin’s reference dimensions, making it suitable as a trusted master in routine inspection jigs and bench setups. Designed to integrate with standard metrology workflows The single‑piece supply and compact format make the pin straightforward to incorporate into existing inspection workflows, from bore checking to calibration fixtures and comparator setups. Its clear specification simplifies documentation and traceability within quality reports, and the compact mass facilitates fast changeovers at inspection stations. By providing a reliable physical reference, the pin helps maintain conformity across batches and supports consistent measurement decisions on the shop floor. For reliable 9.56 mm checks choose the Metav IndustryLine M323.956 gauge pin and contact Metav Werkzeuge in Emmerich for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.956 GTIN: 4061905061349 Category: Messstifte Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 9,56mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.56 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Workshop‑execution Material: Special‑steel Supplied individually Ideal for end‑measure and plug checks FAQ What is the tolerance of this gauge pin? The Metav IndustryLine M323.956 gauge pin is specified to ±0.001 mm, providing a high‑precision reference for tight inspection tolerances. For which applications is the gauge pin recommended? This gauge pin is suitable for end‑measure checks, plug and bore reference tasks, and as a master for setting gauges within workshop and production metrology. What material is the pin made from and how does that help? Made from special steel, the pin offers dimensional stability and a workshop‑grade finish that supports repeatable measurements under normal shop‑floor use. Can the pin be used as a master for setting bore gauges? Yes, the M323.956 gauge pin serves as a compact master reference for setting and verifying bore gauges, comparators and similar measuring fixtures. How should the gauge pin be stored to preserve accuracy? Store the pin protected from shock and contamination, ideally in a cushioned organiser or drawer to avoid nicks on the measuring faces and to maintain the specified tolerance Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.57mm Gauge Pin Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of sub‑micrometre accuracy and a compact, workshop‑ready design: the gauge pin combines a 9.57 mm nominal diameter with ±0.001 mm tolerance and a 50 mm length to secure reliable end‑dimension checks; order via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.957 — 9.57 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.957 is a single precision test pin for end‑dimension verification and inspection work in workshop and quality‑control environments. Workshop version with robust design Diameter 9.57 mm with ±0.001 mm accuracy 50 mm length for end‑dimension checks Delivered in protective transport case Consistent verification for critical end dimensions High‑precision components require unambiguous reference standards. The compact test pin delivers a nominal diameter of 9.57 mm with a declared accuracy of ±0.001 mm, providing a deterministic reference for go/no‑go checks, setting fixtures or validating bore sizes. The extremely fine tolerance reduces ambiguity in pass/fail decisions and supports tighter process control, enabling faster quality decisions and fewer reworks through a measurable, repeatable check standard. Designed for compact inspection tasks and workshop use Built as a single‑piece test pin in a workshop execution, this item is light and easy to handle while remaining stable in short‑span measurements. The 50 mm length is optimised for end‑dimension tasks where access and manoeuvrability matter; the compact form suits bench inspection of small housings, jig set‑up and micro‑assembly verifications. The supply as an individual pin supports selective replacement or targeted calibration without bulk handling. Practical handling and transport for everyday metrology Manufactured from special steel, the pin is intended for repeated use in inspection workflows; the material selection balances machining tolerances and durability for frequent engagement. Delivery in a protective transport case reduces the risk of handling damage in transit and storage, preserving the pin’s geometry until it is required at the inspection point. Supplied as a single unit, the item integrates smoothly into sampling plans and fixture inventories where one defined master gauge is required. For traceable workshop checks and reliable small‑diameter verification, request the Metav IndustryLine gauge pin M323.957 from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and prompt dispatch. Technical Data Article number: M323.957 GTIN: 4061905061356 Label: Prüfstift, einzeln, 9,57mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Nominal diameter: 9.57 mm Tolerance / accuracy: ±0.001 mm Length: 50 mm Weight: 0.032 kg eCl@ss: 21170231 Special features Material: Special steel Supply form: single test pin Version: Workshop execution Delivery: protective transport case FAQ What tolerance does the gauge pin offer? The gauge pin is specified with an accuracy of ±0.001 mm, making it suitable for very fine end‑dimension checks and tight inspection limits. Can the pin be used for bore verification and fixture setting? Yes, the M323.957 gauge pin serves as a reference for bore checks, fixture alignment and end‑dimension verification in workshop and inspection contexts. In what form is the pin supplied? The item is supplied as a single test pin in a protective transport case, designed for safe storage and transport to the inspection bench. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.58mm Gauge Pin ±0.001 mm Length 50 mm, Workshop Version – Metav IndustryLine
The 9.58 mm diameter and ±0.001 mm tolerance together with a 50 mm length deliver reliable end‑dimension checks and consistent fit verification for workshop inspection tasks; order the gauge pin directly via Metav Werkzeuge or consult their specialists for application guidance. Gauge pin M323.958 — 9.58 mm, ±0.001 mm (Workshop version) A gauge pin M323.958 designed for precision end‑dimension verification in inspection, fixture assembly and gauge stacks. Diameter 9.58 mm with ±0.001 mm tolerance Length 50 mm for fixture and gauge stacks Special steel for durable contact surfaces Workshop version for robust day‑to‑day use Accurate end‑dimension checking for production The M323.958 is manufactured to deliver very fine dimensional control where tight fits and repeatable mating are required. With a nominal diameter of 9.58 mm and a production tolerance of ±0.001 mm, the pin offers the dimensional stability needed for final gauging, plug‑gauge checks and assembly validation. This level of precision reduces scrap and rework, supporting efficient parts selection and consistent assembly results in batch production. Robust design that suits daily workshop use Constructed from special steel and specified with a 50 mm overall length, the probe combines compact handling with durable contact performance. The workshop version is finished for repeated use under workshop conditions, making it suitable for manual inspection benches, gauge stacks and fixture set‑up. The low mass (approx. 0.032 kg) aids quick positioning and comfortable handling during repetitive checks. Clear identification and integration into inspection workflows Inventory and traceability are simplified by clear identifiers: SKU M323.958 and GTIN 4061905061363 support straightforward ordering and stock control. The geometry of the pin is compatible with standard bores and gauge fixtures, allowing easy incorporation into existing inspection jigs and comparison setups. As a compact, high‑precision component, it serves as a practical element within routine inspection workflows and gauge assemblies. For precise end‑dimension inspection and straightforward integration into existing gauge systems, request a quotation or application advice for the Metav IndustryLine gauge pin via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M323.958 GTIN: 4061905061363 Manufacturer: Metav IndustryLine Facts Diameter: 9.58 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Material: Special steel Version: Workshop version Intended use: End‑dimension checks, gauge stacks, fixture set‑up FAQ What tolerance does this gauge pin provide? The M323.958 gauge pin is specified to a tolerance of ±0.001 mm on a nominal diameter of 9.58 mm, making it suitable for precision end‑dimension verification. Which materials is the pin suitable for measuring? The pin itself is made from special steel and is intended for contact checking of bores and mating parts irrespective of the workpiece material; it is a dimensional reference rather than a cutting tool. Can the gauge pin be used in gauge stacks and fixtures? Yes — the 50 mm length and workshop design make the pin appropriate for use in gauge stacks, assembly fixtures and manual inspection jigs. How is the item identified for ordering and stock control? Identification is provided via SKU M323.958 and GTIN 4061905061363, which support procurement and inventory workflows. Is a calibration certificate supplied with the pin? No specific calibration certificate is included by default; calibration details are not stated in the product data and should be requested separately if required for traceable measurement records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.59mm Gauge Pin, Workshop Version, ±0.001mm Accuracy, 50mm Length, Special Steel, Case - Metav IndustryLine
Take advantage of workshop-grade accuracy and compact handling: the combination of ±0.001 mm tolerance, 9.59 mm reference diameter and a 50 mm working length supports reliable end-dimension checks and speeds up routine inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.959 — single precision plug gauge, 9.59 mm ±0.001 mm (Metav IndustryLine) The gauge pin M323.959 is a single reference pin designed for precise end‑dimension verification and go/no‑go checks in workshop inspection environments. ±0.001 mm tolerance Diameter 9.59 mm precision Length 50 mm for robust handling Workshop version with transport case Micron-level certainty for end-dimension checks The core advantage lies in the high precision: with a declared ±0.001 mm geometric tolerance the pin serves as a stable reference for final-size verification and plug‑gauge comparison. This level of accuracy reduces measurement uncertainty in productive inspection loops and enables faster decision-making during batch checks. The compact diameter of 9.59 mm and the straight, cylindrical geometry make the pin suitable for slotting into bores, seats or fixture references where a consistent master dimension is required. By using a dedicated reference pin rather than improvised measures, measurement variability caused by repeated setup is minimised and throughput is improved. Durable, workshop-ready design that eases handling Manufactured from special steel and supplied in a workshop version, the pin balances dimensional stability with everyday robustness. The 50 mm shaft length provides sufficient engagement for hand or fixture-based checks while remaining easy to handle; the low mass supports rapid manual positioning without fatigue. Supplied in a protective transport case, the reference remains safe during storage and transit, which preserves geometry and reduces the need for frequent verification. These design choices mean less downtime for maintenance and a longer service life in busy production areas. Integrating the pin into inspection workflows The single plug design simplifies stockkeeping and traceability: the item is listed under SKU M323.959 and carries a GTIN for inventory systems. Use the pin as a go/no‑go master for incoming component acceptance, final assembly checks or as a reference when setting up gauges and fixtures. The compact format supports quick swaps on the inspection bench and, when combined with systematic procedures, contributes to consistent quality documentation and fewer rework cycles. Where traceable masters are required for process control, the clear specifications of this reference pin help to standardise checks across shifts and locations. For workshop-grade reference checks and practical integration into existing inspection routines, contact Metav Werkzeuge in Emmerich to discuss the M323.959 and secure supply or technical clarification. Technical data Article number: M323.959 GTIN: 4061905062223 SKU: M323.959 Weight: 0.032 kg Facts Diameter: 9.59 mm Tolerance: ±0.001 mm Length: 50 mm Special features Material: special steel Workshop version Supplied in transport case FAQ What tolerance does the gauge pin offer? The gauge pin M323.959 from Metav IndustryLine is specified with a ±0.001 mm tolerance for high‑precision end‑dimension checks. What are the diameter and length of the pin? The reference diameter is 9.59 mm and the shaft measures 50 mm in length for reliable engagement during inspection. Is this pin suitable for workshop use? Yes, the workshop version is intended for routine inspection tasks and is supplied in a protective transport case to preserve geometry during handling. Is a calibration certificate included with the product? No specific calibration certificate is indicated in the product data for this gauge pin; any requirement for accredited calibration should be specified when ordering. How is the item identified for stock and traceability? The item is listed under SKU M323.959 and GTIN 4061905062223, which supports inventory control and traceability in inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.5mm Gauge Pin Single, ±0.001mm Tolerance, 50mm Length, Workshop Grade - Metav IndustryLine
Reliable dimensional reference and robust workshop design ensure repeatable inspection results; the combination of ±0.001 mm tolerance and special steel construction supports precise end-measurement tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.950 gauge pin – 9.50 mm diameter, ±0.001 mm, workshop version (Metav IndustryLine) M323.950 is a single precision gauge pin for dimensional reference and end-measure checks in workshop and production inspection. Workshop version for robust daily use Diameter 9.50 mm with ±0.001 mm accuracy Length 50 mm for deep or through-hole checks Reliable reference for quality control tasks The M323.950 precision gauge pin serves as a stable reference for dimensional checks where micrometre-level accuracy is required. With a nominal diameter of 9.50 mm and an indicated tolerance of ±0.001 mm, the pin provides a measurable baseline for go/no-go verification and comparison measurements. Its special steel construction offers the rigidity needed to maintain form under frequent handling, helping to reduce measurement scatter and improve reproducibility in workshop inspection routines. Fast, repeatable checks that save inspection time Designed as a workshop version, this single gauge pin focuses on practicality and endurance during routine use. The 50 mm length allows for straightforward probing of deeper features and through-holes while keeping handling simple; the low mass (0.032 kg) contributes to nimble operation in tight setups. By providing a consistent reference diameter, the pin shortens inspection cycles and supports efficient quality-control workflows without sacrificing measurement confidence. What ±0.001 mm tolerance means in practice A tolerance of ±0.001 mm corresponds to one micrometre of permissible deviation, a level of precision suited to fine mechanical assemblies and toolroom verification. For many production and maintenance tasks, such narrow tolerance reduces ambiguity when assessing fit and clearance; it distinguishes between rough checks and precision verification. The gauge pin functions as an objective standard for end-measure comparisons, making dimensional decisions traceable and less dependent on operator judgement. Applications and compatibility in the workshop This single gauge pin is tailored for use in machine shops, toolrooms and assembly inspection benches as an end measure or reference probe. Typical applications include checking bore diameters, validating mandrels and verifying alignment in fixtures. The compact format and robust material make it suitable for repeated contact with metallic components; the item is supplied individually to allow selective introduction into inspection sets or fixture arrays as required. For ordering and expert guidance on precision gauges from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability and delivery options. Technical data Article number: M323.950 GTIN: 4061905065859 Brand: Metav IndustryLine Label: Gauge pin, single, 9.50 mm, ±0.001 mm, length 50 mm Facts Diameter: 9.50 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.032 kg Special features Material: special steel Delivery: single gauge pin (einzeln) Intended use: end-measure / reference checks Version: workshop execution (Werkstatt-Ausführung) FAQ What tolerance does the gauge pin provide? The M323.950 gauge pin is specified with a tolerance of ±0.001 mm, providing micrometre-level reference accuracy for inspection tasks. What material is used for the pin? The gauge pin is made from special steel, chosen for dimensional stability and wear resistance in workshop environments. Is the gauge pin supplied individually or in sets? This item is supplied individually as a single gauge pin for selective use in inspection routines. Which applications are suitable for this gauge pin? The pin is intended for end-measure and reference checks, such as bore validation, fixture verification and through-hole inspection in machine shops and toolrooms. Does the 50 mm length support deep-hole checking? A 50 mm length offers practical reach for deeper bores and through-holes while remaining straightforward to handle in fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.61mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade reliability and sub-micron accuracy with this precision test pin; the combination of ±0.001 mm tolerance, 9.61 mm diameter and a 50 mm usable length ensures reproducible end measurements – order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Gauge pin M323.961 — Metav IndustryLine workshop test pin, 9.61 mm, ±0.001 mm The Gauge pin M323.961 is a single, workshop-grade precision pin designed for end-measure checks and go/no‑go fixtures in production and inspection environments Workshop-grade construction Diameter 9.61 mm ±0.001 mm Length 50 mm for reliable reach Supplied in transport box Prevent rejects with measurable sub-micron accuracy Consistency in every batch is the primary objective on the shop floor. The M323.961 delivers ±0.001 mm tolerance on a 9.61 mm diameter, which stabilises quality-control limits and reduces costly rework. Such fine accuracy supports tight assembly tolerances and shortens inspection time, because measurements are repeatable and immediate. In practical terms, this precision helps maintain first-pass yield and ensures components meet final-dimension specifications without additional adjustments. Robust workshop design for everyday handling Manufactured in special steel and labelled as a workshop version, this inspection pin balances wear resistance with practical handling. The 50 mm length provides reach into moderate-depth bores while remaining easy to seat and remove in fixtures. Supplied in a transport box, the pin is protected during storage and transit, preserving the calibrated surface and avoiding incidental marks that can affect measurement fidelity. The lightweight construction also simplifies manual use and fixture handling. Fit for inspection workflows and fixture integration The pin integrates smoothly into standard checking jigs and end-measure setups, serving as a reliable master for comparative checks and fixture validation. Its dimensional stability supports automated and manual inspection routines, enabling faster cycle verification and clearer pass/fail decisions. For workshops and quality departments seeking dependable tools, this gauge pin offers a pragmatic balance of precision, durability and straightforward integration into existing metrology processes. For tailored advice on incorporating the Metav IndustryLine gauge pin M323.961 into specific inspection setups, or to request a detailed specification sheet, contact Metav Werkzeuge directly by phone or email for expert guidance and local supply options Technical data Article number: M323.961 GTIN: 4061905062247 Category: Messstifte Core technical data Diameter: 9.61 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Material: Special steel Workshop version Supplied in transport box FAQ What tolerance does the gauge pin have? The gauge pin is specified with a tolerance of ±0.001 mm, allowing sub-micron control in end-measure checks. Is the pin suitable for fixture and jig use? Yes, the workshop-grade construction and 50 mm length make the pin suitable for common fixtures and go/no‑go checking applications. What material is the pin made from? The inspection pin is made from special steel, selected for stability and wear resistance in standard workshop environments. How is the product supplied and protected? The pin is supplied in a transport box to protect the measuring surfaces during storage and transit. Which product and brand reference should be ordered for this pin? Order the Metav IndustryLine gauge pin M323.961 to obtain the exact diameter and tolerance combination described above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.62mm Test Pin Workshop Version, ±0.001 mm Length 50 mm - Metav IndustryLine
High-precision checking with an ultra-tight tolerance and compact length ensures consistent end‑measurement results; the 9.62 mm diameter and ±0.001 mm accuracy reduce rework and inspection time. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.962 – single 9.62 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The gauge pin M323.962 provides a compact, workshop-suitable solution for final dimensional checks and reproduction of end measurements in inspection and assembly processes. *High precision ±0.001 mm tolerance *Diameter 9.62 mm for tight fit checks *50 mm solid body for stable handling *Delivered in protective transport box Precision engineered for repeatable end measurements The checking pin is produced to an exact ±0.001 mm tolerance, enabling reliable verification of bore and shaft fits where small deviations matter. Such fine accuracy translates into fewer rejected parts and faster go/no‑go decisions on the shop floor. The compact diameter of 9.62 mm makes this item especially useful for end‑dimension controls and laboratory comparators, while the small mass supports quick handling and reduced operator fatigue during repetitive inspection tasks. Robust construction for workshop use and durability Machined from special steel, the component offers a balance of dimensional stability and resilience suitable for regular workshop use. The 50 mm length provides sufficient engagement for practical checks without excess overhang, supporting steady placement in gauges or fixtures. The workshop variant has been configured for everyday inspection routines, offering a pragmatic compromise between precision and durability for production environments. Practical protection and traceability for quality processes Delivered in a protective transport box, the product arrives ready for safe storage and immediate use, reducing the risk of transit damage and preserving the calibrated diameter during handling. Marking and identification via M323.962 and the GTIN support traceability within incoming inspection or goods‑in procedures. The combination of compact size, high tolerance and workshop orientation helps streamline process control and maintain consistent quality across production batches. For precise end measurements and practical workshop integration, contact Metav Werkzeuge to request the M323.962 gauge pin and receive tailored advice from our inspection specialists Technical data Article number: M323.962 GTIN: 4061905062254 Brand: Metav IndustryLine Dimensions & tolerance Diameter: 9.62 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.032 kg Special features Material: special steel Workshop version Delivered in protective transport box Category: gauge pin (single) FAQ What is the nominal diameter and tolerance of this checking pin? The checking pin has a nominal diameter of 9.62 mm with a tolerance of ±0.001 mm for high‑precision fit verification. Is the gauge pin supplied ready for use in workshop inspections? Yes, the M323.962 is a workshop version supplied in a protective transport box for immediate use and safe storage. What material is the pin made from and how does that help in daily use? The pin is made from special steel; this provides dimensional stability and robustness suited to routine inspection tasks. Can the part be used for final end‑measurements and fit checks? The design and tolerance make this gauge pin suitable for final dimensional checks and go/no‑go fit verification in inspection workflows. How is the item identified for traceability in quality systems? Identification is supported by the article number M323.962 and GTIN 4061905062254 for integration into traceability procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.63mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combine workshop-ready durability with ±0.001 mm metrological accuracy and a compact 50 mm length for reliable end-dimension control. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 9.63 mm, ±0.001 mm, Length 50 mm (Metav IndustryLine) The gauge pin is a workshop-grade test pin designed for precise end-dimension verification in production and quality inspection tasks. Diameter 9.63 mm, tolerance ±0.001 mm Length 50 mm, compact workshop format Made from special steel for durable use Delivered in protective case for transport Confidence in end-dimension checks A single-purpose test pin with a 9.63 mm nominal diameter and ±0.001 mm tolerance provides measurable confidence when validating final dimensions. The extremely fine tolerance reduces uncertainty in pass/fail checks and supports streamlined inspection protocols; this precision is particularly valuable for matched-fit assemblies and end‑part verification where repeatability is essential. The compact design keeps handling simple while preserving measurement integrity. Compact format that speeds inspection At 50 mm overall length the test pin is deliberately compact for efficient use in workshop environments; it fits into gauges, fixtures and handheld inspection routines without obstructing adjacent tooling. Constructed from special steel, the pin resists wear under repeated seating and transfer, which minimises rework and extends service life. The result is a tool that supports faster inspection cycles and stable production throughput. Traceability and readiness for the workshop Marked and packaged for immediate use, the item arrives ready for inspection tasks and storage. The single-pin configuration simplifies inventory management and integration into gauge sets. Clear identification via SKU and global trade number ensures straightforward traceability throughout quality documentation and incoming inspection workflows, supporting compliance with internal quality systems. Practical handling and lasting value The workshop-grade finish and robust material choice allow the pin to withstand frequent handling while preserving surface form, reducing the need for early replacement. Combined with Metav's emphasis on accessible precision, the pin represents a pragmatic balance of accuracy, durability and everyday usability—helping maintain consistent quality without overcomplicating processes or tooling budgets. For workshop-ready precision from the Metav IndustryLine range, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm availability and application details Technical data SKU: M323.963 GTIN: 4061905062261 Description: Gauge pin, single, 9.63 mm, ±0.001 mm, length 50 mm Measurements Diameter: 9.63 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.032 kg Materials & special features Material: special steel Workshop version Single test pin Delivered in protective case for transport FAQ What tolerance does this test pin offer? The gauge pin is manufactured with a tolerance of ±0.001 mm, making it suitable for fine end-dimension verification. Which nominal diameter is supplied for this item? This product is supplied with a nominal diameter of 9.63 mm and a length of 50 mm. Is the pin ready for immediate use upon delivery? Yes, the Metav IndustryLine gauge pin is supplied ready for inspection tasks and packaged for safe transport. Can this pin be used in dedicated gauge sets or fixtures? The compact, single-pin format is suitable for integration into gauge sets, fixtures and handheld inspection routines. How is the product identified for traceability? Identification is provided via SKU M323.963 and GTIN 4061905062261 for use in quality documentation and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.64mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Precision workshop gauge pin combining micron accuracy and robust handling; ±0.001 mm tolerance, a 9.64 mm diameter and 50 mm length deliver reproducible end‑measure checks, while the special steel construction and supplied transport case support safe workshop use. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.964 — single test pin, 9.64 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.964 is a single workshop test pin designed for precise end‑measure inspections and repeatable go/no‑go verification in production and metrology environments. ±0.001 mm tolerance for high repeatability 9.64 mm precision diameter 50 mm shaft length for end‑measure checks Supplied in transport case for secure storage Consistent sub‑micrometre accuracy for end‑measure control The pinned design offers sub‑micrometre repeatability: with a declared tolerance of ±0.001 mm the component is suited to tasks that demand near‑micron stability. The nominal 9.64 mm diameter provides a defined reference for plug and bore gauging, enabling clear pass/fail decisions in process control. Such precision reduces rework and inspection time by making fit‑checks instantly comparable against fixed limits, which is particularly beneficial where short cycle times and traceable results matter. Workshop‑grade geometry and handling for daily use Constructed from special steel, the pin’s 50 mm working length balances accessibility with rigidity for end‑measure checks and fixturing. The workshop version build tolerates regular handling while maintaining surface integrity for repeat measurements; its low mass supports quick positioning (weight: 0.032 kg) without added inertia. Delivery in a dedicated transport case protects the reference diameter and simplifies storage between inspection sequences, reducing the risk of damage that would compromise measurement certainty. Practical integration into inspection routines As a single, purpose‑built test pin the item integrates into bench‑level inspection and assembly controls for end‑measure verification of components and gauges. The simple geometry supports rapid visual and tactile checking as part of a statistical control workflow or a manual gauging station. The product’s traceable specification and workshop orientation make it a pragmatic choice for quality departments and small series production where reproducible reference standards are required. The compact reference pin is especially useful for fine mechanical tasks and small‑component assemblies. For shop‑floor accuracy from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for delivery options and technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.964 GTIN: 4061905062278 Label: Prüfstift, einzeln, 9,64mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Material: special steel Workshop version Supplied in transport case Application: end‑measure checks Single item delivery FAQ What inspection tasks is this gauge pin suitable for? This gauge pin is intended for end‑measure verification and plug/bore checks; the M323.964 is particularly suited to fine mechanical and small‑component inspection tasks. How precise is the reference diameter? The reference diameter is specified at 9.64 mm with a tolerance of ±0.001 mm, enabling near‑micron reproducibility for comparative gauging operations. What material and protection are provided? The pin is made from special steel and is supplied in a transport case to protect the working diameter during storage and transit. Can this pin be used in production gauging fixtures? Yes; the robust workshop construction and defined length of 50 mm make it suitable for integration into manual gauging stations and simple fixture setups. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.65mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension control with a gauge pin that combines micrometre accuracy, a compact 9.65 mm diameter and a practical 50 mm length for reliable fixture and alignment checks; order directly via Metav Werkzeuge or consult the Metav team for technical advice. Gauge pin M323.965 — 9.65 mm, ±0.001 mm (50 mm length) A Gauge pin M323.965 designed for end‑dimension checks and alignment tasks in precision metrology, delivered as a single workshop‑grade test pin. High‑precision tolerance ±0.001 mm Diameter 9.65 mm in special steel 50 mm length for fixture and gap checks Workshop version delivered as a single pin Micrometre‑level accuracy for decisive quality checks This test pin provides a tolerance of ±0.001 mm, equivalent to 1 µm, which places it in the high‑precision class used for final dimensional verification. Such resolution reduces uncertainty in pass/fail decisions during quality control and shortens inspection cycles when integrated into routine checks. The exceptional accuracy is particularly advantageous for small tolerances on mating parts and end‑dimension controls, where even minute deviations can lead to assembly issues. Compact dimensions that support stable measurement and handling With a diameter of 9.65 mm and a length of 50 mm, the pin balances reach and stiffness to minimise bending during insertion and alignment. The compact geometry eases handling in confined fixtures and makes the component suitable for fixture set‑up, plug trials and bore checks. Constructed from special steel, the pin maintains dimensional stability under frequent use, ensuring repeatable results with minimal maintenance. Designed for practical workshop and inspection use Delivered as a single workshop‑grade pin, this item is intended for direct use in production inspection and jigs. The straightforward design permits rapid incorporation into gauging stacks or use as an alignment dowel when checking end dimensions and clearances. The compact test pin supports efficient workflows in machine shops and inspection stations where speed and repeatability are priorities, while preserving the precision required for reliable decision making. For micrometre‑critical inspection tasks, contact Metav Werkzeuge to request the M323.965 gauge pin and obtain tailored advice from our precision specialists Technical Data Article number: M323.965 GTIN: 4061905062810 Manufacturer: Metav IndustryLine Facts Diameter: 9.65 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.032 kg Materials / Special features Material: Special steel Delivery: single gauge pin Workshop‑grade design FAQ What level of precision does this gauge pin offer? The gauge pin delivers a precision of ±0.001 mm (1 µm), suitable for micrometre‑level end‑dimension checks in metrology applications. Can the pin be used for alignment and fixture set‑up? Yes, the 50 mm length and 9.65 mm diameter make the pin appropriate for alignment tasks, fixture positioning and bore checking in workshop environments. Is this a single‑item delivery or part of a set? The item is supplied as a single workshop‑grade pin under the designation M323.965. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.66mm Gauge Pin,±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of ±0.001 mm accuracy, a workshop‑ready design and robust special steel construction for repeatable end‑measurement checks; order directly via Metav Werkzeuge or consult the technical team for application advice. Gauge Pin M323.966 — 9.66 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge Pin M323.966 is a single, workshop‑grade precision pin designed for end‑measure verification, alignment and fixture checks in production and inspection environments Workshop‑grade construction ±0.001 mm measurement tolerance Diameter 9.66 mm, length 50 mm Made from special steel Accurate end‑measure checks for quality assurance The M323.966 serves as a reliable reference for end‑measurement and alignment tasks, delivering an exceptional ±0.001 mm (1 µm) tolerance that supports stringent inspection routines. Such fine tolerance ensures repeatable positional checks and dimensional comparisons when validating bores, locating pins or setting up jigs. The combination of a 9.66 mm diameter and a 50 mm shaft provides adequate engagement depth while keeping handling simple; this balance reduces the risk of measurement variation and increases throughput in routine quality control. Durable workshop design that withstands daily use Engineered as a workshop‑grade component, the pin is manufactured from special steel, offering dimensional stability and wear resistance under regular handling. At approximately 0.032 kg the component is easy to manoeuvre while remaining solid in fixtures, which helps to maintain alignment accuracy over repeated cycles. The single‑piece design avoids assemblies that might introduce play; as a result, maintenance demands are low and service intervals are extended, supporting uninterrupted production processes and reliable inspection results. Easy integration into inspection rakes and fixtures As a single precision pin, this item adapts well to locating arrays, go/no‑go fixtures and end‑measure templates. Its nominal diameter and tight tolerance make it suitable as a reference in comparative gauges and as a locating element in assembly jigs. Traceability is supported by the clear article designation, facilitating inventory management and replacement planning within a parts kit. Confidence in measurement is enhanced by using standardised, precision components that are specified and repeatable across batches. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge for stock details and application guidance by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: M323.966 GTIN: 4061905062827 Designation: Single gauge pin, workshop edition Facts Diameter: 9.66 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Material: Special steel Single‑piece construction Intended use: End‑measurement, locating and fixture checks FAQ What level of accuracy does the gauge pin provide? The M323.966 achieves a tolerance of ±0.001 mm, making it suitable for high‑precision end‑measurement and alignment tasks. Can the pin be used in production fixtures and jigs? Yes. The workshop‑grade construction and single‑piece design of the M323.966 suit its use as a locating element in assembly jigs and production fixtures. What material is the pin manufactured from? The gauge pin is made from special steel, chosen for dimensional stability and wear resistance in regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.67mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Taking advantage of workshop‑grade robustness, 9.67 mm diameter precision and a tight ±0.001 mm tolerance, this single gauge pin provides a reliable reference for end‑measure checks and repeatable inspection routines; its 50 mm length gives convenient handling and stable seating in fixtures. Order the (gauge pin M323.967) directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge pin M323.967 — Workshop‑grade precision test pin, 9.67 mm ±0.001 mm (Metav IndustryLine) The gauge pin M323.967 is a single precision test pin designed for end‑measure verification and reference checks in workshop metrology applications Diameter 9.67 mm ±0.001 mm 50 mm overall length Made from special steel Workshop‑grade construction Precise tolerance for repeatable reference measurements The core advantage is the ±0.001 mm tolerance, which establishes the pin as a stable reference for comparative and end‑measure tasks. With a nominal 9.67 mm diameter produced to a close running tolerance, the pin minimises positional uncertainty and enables repeatable measurements when used as a datum or plug reference in inspection benches, go/no‑go sequences or fixture set‑up. This reproducibility reduces rework and supports consistent quality control output. Durable construction and material benefits Manufactured from special steel, the pin combines wear resistance with dimensional stability under normal workshop conditions. The material choice gives lasting bearing surfaces for repeated seating in bores and fixtures, and the workshop‑grade construction makes the pin suitable for everyday inspection routines without rapid surface degradation. The robust build supports long service intervals and lowers the frequency of replacements, improving uptime in production and inspection areas. Handling and ergonomic advantages in routine use At 50 mm overall length the component offers a comfortable gripping zone for manual placement while keeping the functional end short enough to avoid bending or play in tight fixtures. The single‑piece format simplifies stock management for bench operators and tool rooms, and the compact form aids fast mounting and removal during batch checks. The geometry is optimised for steady seating and straightforward tactile feedback when locating into reference bores. Practical applications across inspection and assembly Designed as a precision reference, this test pin is suitable for end‑measurement of bores, alignment checks in assembly jigs and as a tactile datum for comparative gauging. The component performs well in sample testing and setup procedures where a verified reference diameter and a repeatable contact point are required. Its specification makes it appropriate for workshop metrology, incoming inspection and fixture validation tasks. Quality assurance and traceability for production control The clearly stated tolerance class and the branded origin support traceable component selection within quality systems. The declared values—diameter, tolerance and length—allow straightforward inclusion of the item into inspection plans and control documentation. Using a branded, workshop‑specification pin contributes to process reliability and helps demonstrate controlled measurement standards during internal audits or customer assessments. Easy stock and workshop integration As a single‑item solution with a distinct SKU, the pin can be managed alongside other metrology tools for quick retrieval during set‑up and inspection. The compact footprint simplifies storage in tool cabinets or drawers and the clear technical data enable rapid selection when matching pins to specific bore sizes or verification stages. Its format keeps operator handling simple and inspection throughput high. For workshop accuracy trust Metav IndustryLine test pins—contact Metav Werkzeuge for product availability and delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.967 GTIN: 4061905062834 Brand: Metav IndustryLine Category: Messstifte ECLASS: 21170231 Facts Diameter: 9.67 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Material: special steel Workshop version Single item delivery Precision class: ±0.001 mm FAQ What are the exact diameter and tolerance of this pin? The gauge pin is specified at 9.67 mm diameter with a tolerance of ±0.001 mm (gauge pin M323.967, Metav IndustryLine, SKU M323.967). What is the total length and mass of the test pin? The test pin has an overall length of 50 mm and a weight of 0.032 kg, suitable for manual handling and fixture seating. Which material is used and is it suitable for workshop use? Made from special steel, the component is described as a workshop‑grade item and is intended for regular inspection and bench applications. Is this a single pin or part of a set? This product is supplied as a single test pin (single‑piece format, not a set). For which inspection tasks is this test pin suitable? The pin is intended for end‑measure verification, bore checking and use as a reference datum in jigs and fixtures, supporting repeatable measurement routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.68mm Gauge Pin, Workshop Version, ±0.001mm Accuracy, 50mm Length - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, robust special steel construction and compact 50 mm length for reliable end‑measure checks in workshop environments; order the pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.968 — gauge pin, 9.68 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A Test pin M323.968 designed as a workshop‑grade gauge pin for precise end‑measure and reference checks in inspection fixtures and assembly jigs. High‑precision ±0.001 mm tolerance Diameter 9.68 mm, length 50 mm Workshop‑grade special steel construction Precision that stabilises inspection results The gauge is manufactured to a tolerance of ±0.001 mm, which makes it suitable where repeatable end‑measure verification is required. Built as a single, cylindrical reference element, the component's exact 9.68 mm diameter and defined 50 mm length reduce fit‑play when locating bores or mating parts. Such dimensional certainty shortens inspection loops and lowers the risk of false rejects, because a tighter pin tolerance directly improves positional repeatability in gauge stacks and go/no‑go checks. Robust design for everyday workshop handling Produced in special steel and labelled as a workshop‑execution item, the test pin balances hardness with corrosion resistance for routine use at the bench. The compact 50 mm blank and low mass (approx. 0.032 kg) permit fast manual handling and easy integration into small fixtures without excess inertia. The construction supports frequent insertion cycles and simple cleaning; the hardened surface helps to maintain nominal diameter under regular mechanical contact, preserving measurement integrity over many cycles. Traceable part identity and practical integration The single test pin is supplied as an individually identifiable article (SKU M323.968, GTIN 4061905062841), easing stock control and audit trails in quality departments. As a standard gauge element it is compatible with common inspection setups and serves well as a reference for end‑measure validation and final inspection routines. Backed by Metav’s distribution from Emmerich, the pin is part of a broader selection of precision tools aimed at making accurate measurement accessible to workshops and production facilities. For application guidance or to secure supply of the Metav IndustryLine test pin M323.968, contact Metav Werkzeuge GmbH in Emmerich by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com for personalised advice and reliable delivery Technical data Article number: M323.968 GTIN: 4061905062841 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 9.68 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Special features Workshop‑grade execution Material: special steel Single test pin for end‑measure checks Intended use: reference and inspection applications FAQ What is the main purpose of this test pin? The Metav IndustryLine test pin M323.968 serves as a reference element for end‑measure checks, locating operations and go/no‑go fixtures in inspection and assembly tasks. What dimensional accuracy can be expected? The pin is manufactured to a tolerance of ±0.001 mm, providing high‑precision reference performance for tight inspection requirements. What are the exact dimensions and mass? The pin has a diameter of 9.68 mm, a length of 50 mm and a mass of approximately 0.032 kg; it is supplied as an individual item (SKU M323.968). Which material is used for the pin? Construction is in workshop‑grade special steel, chosen to balance surface durability with dimensional stability in regular use. How is the product identified for stock and traceability? The article is listed under SKU M323.968 and GTIN 4061905062841, enabling straightforward inventory control and auditability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.69mm Gauge Pin Precision, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise end‑size verification and consistent repeatability thanks to a ±0.001 mm tolerance and a 9.69 mm diameter in a compact 50 mm length. Designed as a workshop version from Metav IndustryLine and supplied in a protective case for secure transport, this gauge pin supports reliable inspection routines and reduces rework. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for technical advice. M323.969 — Gauge pin, workshop grade, 9.69 mm ±0.001 mm (Metav IndustryLine) The M323.969 gauge pin is a single workshop‑grade test pin intended for precise end‑size and plug checks in production and inspection environments. High precision ±0.001 mm tolerance Diameter 9.69 mm, workshop grade Length 50 mm for end‑size checks Delivered in protective case Ensure measurement confidence with micrometric tolerance The central benefit of this workshop test pin is its ±0.001 mm tolerance, which translates into dependable acceptance criteria for critical fits and small‑bore inspections. Such tight tolerance reduces ambiguity during pass/fail checks and shortens decision loops on the shop floor. Constructed from special steel, the pin offers dimensional stability and wear resistance so that repeated measurements remain consistent. For production environments where small deviations have direct cost implications, the pin’s accuracy provides a measurable improvement in quality control and fewer scrapped parts. Durable design for daily inspection workflows Built as a workshop execution, this single pin meets the demands of frequent handling and rapid gauging tasks. At 50 mm length and a mass of approximately 0.032 kg, the tool is easy to manoeuvre while remaining rigid enough for repeatable contact across service cycles. The supplied protective case minimises transport and storage damage, keeping the measuring surface free from nicks and corrosion. This practical combination of durability and compactness supports continuous use in machine shops, assembly stations and incoming inspection. Practical application: end‑size checks and fit verification The gauge pin is intended for fast verification of end‑dimensions and plug fits during incoming inspections or in‑process checks. With a nominal diameter of 9.69 mm, it is suitable for verifying bore sizes, alignment bores and related mating parts where precise clearance or interference must be controlled. The simple geometry and clearly defined tolerance make it straightforward to implement as a go/no‑go reference in operator checklists or as part of a documented inspection plan that shortens throughput time without sacrificing traceability. Integration into quality systems and workshop routines Although supplied without an ISO 17025 certificate (none indicated), the pin’s workshop specification and robust manufacture make it a reliable tool for routine quality control. The compact format encourages frequent checks at the machine or workstation, improving early detection of tool wear or fixture drift. Recording measurement results against this reference helps build process data that can be used to adjust maintenance intervals and reduce unscheduled downtime. The M323.969 complements existing metrology sets and can be stored safely in its case between uses. For dependable end‑size verification with Metav IndustryLine reliability, order the M323.969 gauge pin via Metav Werkzeuge or contact the Metav specialists at info@metav-werkzeuge.com for application guidance Technical Data Article number: M323.969 GTIN: 4061905063282 Weight: 0.032 kg Material: Special steel Tolerance: ±0.001 mm Diameter: 9.69 mm Length: 50 mm Facts Category: Gauge pin / test pin SKU: M323.969 Mass (approx.): 0.032 kg Special features Workshop execution Delivered in protective case for transport Intended for end‑size and plug checks FAQ What level of accuracy does this gauge pin provide? The gauge pin achieves a ±0.001 mm accuracy; the M323.969 is therefore suitable for very fine end‑size verifications where tight tolerances are required. Is the M323.969 supplied ready for use out of the box? Yes, the M323.969 is supplied as a finished workshop item and delivered in a protective case to preserve the measuring surfaces during transport and storage. What material is used for the test pin and how does it affect wear? The test pin is manufactured from special steel, chosen for dimensional stability and wear resistance to maintain measurement reliability under frequent use. For which applications is this gauge pin designed? The M323.969 is designed for end‑size checks, bore verification and plug fit testing in production, incoming inspection and assembly environments. Can this pin be used as part of a documented inspection routine? Yes, the M323.969 is well suited to be integrated into documented inspection plans and operator checklists for consistent pass/fail decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.6mm Gauge Pin, Single, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
High-precision gauge pins that combine a tight ±0.001 mm tolerance with a compact 50 mm handling length and robust workshop‑grade construction deliver repeatable end‑dimension verification; supplied in a protective transport case for safe storage and transit. Order the test pin directly via Metav Werkzeuge or consult our specialists for application support. M323.960 Test Pin — gauge pin 9.60 mm, ±0.001 mm (Metav IndustryLine) The M323.960 Test Pin is a workshop‑grade gauge pin intended for end‑dimension checks and precision inspection tasks in industrial metrology. 9.60 mm diameter with ±0.001 mm tolerance Workshop-grade construction for regular use 50 mm length for easy handling and seating Supplied in a protective transport case Accurate end‑dimension verification for standard quality control With a nominal diameter of 9.60 mm and a fine ±0.001 mm tolerance, this gauge delivers the dimensional certainty required for critical inspection steps. The geometry is configured for reliable seating during checks of bore gauges, receiving surfaces and end‑faces, so repeatable results are achieved with minimal setup. The high accuracy reduces rework and inspection time, supporting faster throughput in routine quality control operations. Robust workshop design that eases handling and logistics Constructed in a workshop‑grade specification from special steel, the pin balances wear resistance with dimensional stability for regular use on the shop floor. Its 50 mm length gives good manual control while remaining compact for fixture use. Delivery in a protective transport case ensures the gauge arrives undamaged and stays protected in transit or in a toolbox, preserving its calibration interval and extending service life. Practical benefits for inspection routines and small‑batch production As a straightforward inspection tool, this gauge pin supports quick go/no‑go assessments and end‑size verification without complex setup, helping reduce cycle times in small‑batch production and maintenance checks. The combination of compact form, tight tolerance and workshop durability offers dependable readings that integrate easily into existing QC workflows. The Metav IndustryLine provenance further contributes to consistent quality and availability across industrial customers. For precise end‑size control opt for the Metav IndustryLine M323.960 test pin and contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.960 GTIN: 4061905062230 Brand: Metav IndustryLine Item label: Test pin, single, 9.60 mm, ±0.001 mm, length 50 mm Facts Diameter: 9.60 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.032 kg Measurement range min/max: 9.6 mm Special features Material: special steel Workshop execution Supplied in transport case for protection and transit High-precision end‑dimension application (end sizes) ECLASS: 21170231 FAQ What tolerance and diameter does this gauge provide? The M323.960 test pin is manufactured to a diameter of 9.60 mm with a tolerance of ±0.001 mm, making it suitable for high‑precision end‑dimension checks. Which material is the pin made from and how durable is it? The gauge pin is made from special steel in a workshop‑grade execution, offering dimensional stability and durability for regular inspection tasks. Is a transport case included with the item? Yes, the gauge pin is supplied in a protective transport case to ensure safe storage and reduce the risk of damage during handling and transit. For which inspection tasks is this pin best suited? This gauge is ideal for end‑dimension verification, seating checks and fast go/no‑go assessments in small‑batch production and workshop quality control. Does the design support easy manual handling in workshop use? The compact 50 mm length and workshop specification are intended to facilitate easy handling, fixturing and reliable seating during routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.71mm Gauge Pin, Single, ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of highly consistent production checks with a workshop‑grade gauge pin that combines micrometric tolerance, compact geometry and durable material for repeatable end‑measurement results; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.971 — 9.71 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Gauge pin M323.971 is a single, workshop‑grade cylindrical pin designed for precise end‑measurement and fit verification in production, inspection and assembly environments. Workshop‑grade construction Diameter 9.71 mm ±0.001 mm Length 50 mm for bore and depth checks Made from special steel Faster, confidence‑boosting precision for routine checks A tight geometric tolerance of ±0.001 mm delivers reproducible gauge results that reduce uncertainty during serial inspections. The compact diameter of 9.71 mm and the stiffer short form help to limit bending and operator‑induced error, which in turn shortens inspection cycles and lowers scrap rates. Because the item is manufactured for workshop use, it withstands frequent handling while maintaining the dimensional integrity required for go/no‑go assessments and end‑dimension verification. Robust design that keeps measurement drift at bay Constructed from special steel, the pin resists wear and preserves the diameter over many measurement cycles, offering a predictable service life in busy production settings. The 50 mm length provides access into bores and recesses that typical short pins cannot reach, while remaining manageable for one‑person handling. The combination of material selection and compact form factor minimises surface damage to mating parts and supports repeatable seating during successive checks. Simple integration into inspection workflows The plain cylindrical geometry makes the pin compatible with standard plug gauges, fixture gauges and manual bench checks, enabling quick implementation without process redesign. The clear numeric tolerance and single‑piece configuration simplify documentation in inspection logs and production control lists, making the component easy to reference during quality audits. Visible, straightforward specifications accelerate operator decision‑making and reduce time spent on interpretation. Trusted sourcing and practical aftercare Metav’s approach to democratising precision ensures that workshop‑grade tools are available with consistent quality standards and dependable distribution from Emmerich. The product’s workshop specification reflects decades of metrology experience aimed at supporting small and mid‑sized production teams with industry‑grade parts that integrate into everyday quality routines. For reliable, workshop‑ready measurement certainty, request the Metav IndustryLine gauge pin via Metav Werkzeuge or contact our Emmerich team for application guidance at info@metav-werkzeuge.com. Technical data SKU: M323.971 GTIN: 4061905063305 Manufacturer: Metav IndustryLine Facts Diameter: 9.71 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: special steel Workshop version Single gauge pin for end‑measurement FAQ What inspection tasks is this gauge pin suitable for? The gauge pin is ideal for end‑dimension checks, bore gauging and fit verification in production and inspection routines using the Metav IndustryLine single gauge pin M323.971. How does the ±0.001 mm tolerance affect measurement reliability? A tolerance of ±0.001 mm ensures high repeatability for critical fit checks and reduces ambiguity in pass/fail decisions when using the Metav IndustryLine gauge pin. Can this pin be used in assembly fixture setups? Yes, the straight cylindrical form and 50 mm length make the pin suitable for fixture validation and alignment checks with standard clamping and plug gauge fixtures. Is the material appropriate for frequent use in a workshop? The pin is produced from special steel, selected to balance wear resistance and surface finish, supporting repeated use in workshop environments. Which product identifiers should be quoted when ordering? Please quote the SKU M323.971 and the GTIN 4061905063305 for unambiguous identification of the Metav IndustryLine gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.72mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
The combination of 9.72 mm diameter, ±0.001 mm tolerance and a 50 mm length delivers repeatable, laboratory-grade end measurements for workshop and inspection environments; its robust workshop execution ensures long service life. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin, single – 9.72 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A single gauge pin designed for precise end measurements and inspection tasks, supplied in a workshop-ready 50 mm form for routine metrology and production control. 9.72 mm diameter ±0.001 mm tolerance 50 mm hardened special steel body Workshop execution, robust finishing Supplied in a transport box Consistent high-precision for end measurements A precision gauge providing ±0.001 mm repeatability reduces ambiguity in go/no-go checks and dimensional verification. The cylindrical plug, manufactured to tight tolerances, acts as a reference for bore checks, setting and fixture alignment; when used as a master pin in quality control, measurement scatter is minimised and throughput stabilises. The combination of a defined diameter and tight tolerance supports traceable inspection routines and reliable part acceptance criteria. Material choice that stands up to the workshop Made from special steel and finished for workshop use, the pin balances hardness with surface integrity to resist wear during frequent insertions and removals. The thermal and mechanical properties of the chosen steel maintain dimensional stability across typical shop-floor conditions, so fittings, jigs and measuring fixtures retain their reference geometry for longer. The 50 mm body length provides adequate grip and engagement depth without unnecessary overhang, easing handling during repetitive tasks. Designed for integration in production workflows As a compact gauge element, this precision pin is suitable for use in assembly stations, inspection benches and calibration sets. Its nominal 9.72 mm dimension matches common end-measurement points and can be combined with plug gauges, dial indicators or coordinate measurement setups to speed up alignment and setup procedures. By supplying a repeatable reference, the pin contributes directly to fewer machine stoppages and lower scrap rates—measurable gains for small and medium production runs. Handling, storage and transport considerations Delivered in a protective transport box, the pin arrives ready for safe storage and immediate use. The modest mass and compact form factor make it simple to handle, label and slot into existing gauge sets. The workshop execution means surfaces are finished to withstand routine use; when combined with a clear labelling practice and proper storage, the item preserves its measurement capability and traceability across multiple production cycles. Practical applications that benefit from tight tolerances Typical applications include clearance and fit verification, gauge blocks complements, fixture setting and end-dimension checks for turned components. In mould and toolmaking, such a reference pin ensures that mating features meet specification; in small-batch components it speeds up pass/fail decisions. The element is thus especially useful wherever rapid, repeatable validation of inner diameters and bores is required. Supply reliability and partner assurance Sourced via Metav’s IndustryLine, the item benefits from a distribution and quality filter located in Emmerich that supports European workshop needs. Metav’s long-standing market presence and broad product range mean that replacement and complementary gauges are accessible, simplifying inventory planning and ensuring continuity in inspection processes. Discuss the suitability of this Metav IndustryLine gauge pin for specific measuring tasks with Metav Werkzeuge or request a technical consultation to align it with existing inspection protocols Technical data Article number: M323.972 GTIN: 4061905063312 Brand: Metav IndustryLine Facts Diameter: 9.72 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: Special steel Version: Workshop execution Supplied in a transport box Category: Gauge pins FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.972 is manufactured to a tolerance of ±0.001 mm, providing high-precision reference for end measurements. Can the pin be used for fixture and jig set-up? Yes, the 9.72 mm diameter and robust workshop finish make this pin suitable for setting fixtures, aligning jigs and serving as a reliable reference in assembly and inspection tasks. How is the gauge pin delivered and stored? The pin is supplied in a protective transport box that supports safe handling and storage, preserving the integrity of the measuring surface between uses. Which material is the pin made from and why does it matter? Constructed from special steel, the pin combines wear resistance and dimensional stability—important qualities for consistent measurements under typical workshop conditions. Is this item suitable for repeatable production control tasks? Yes, the combination of tight tolerance, compact length and workshop-ready finishing makes it well suited to repeatable go/no-go checks and routine quality-control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.73mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micrometre accuracy, compact workshop design and protected delivery for reliable end‑dimension checks; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.973 — workshop test pin, Ø 9.73 mm, ±0.001 mm (Metav IndustryLine) A test pin M323.973 designed for precise verification of end dimensions and inspection fixtures in workshop and production settings. Workshop-grade design, robust finish Diameter 9.73 mm with ±0.001 mm accuracy 50 mm length for deep gauge checks Supplied in transport box for protection Exceptional accuracy for end‑dimension verification The M323.973 delivers a diameter of 9.73 mm with a measuring tolerance of ±0.001 mm, making it suitable where reproducible reference dimensions are required. This level of precision reduces measurement uncertainty when checking end‑masses or plug gauges and supports quality assurance processes that demand tight tolerances. The compact geometry and narrow tolerance band mean fewer rejections and a clearer pass/fail decision in go/no‑go or comparator fixtures, translating directly into more efficient inspection cycles and reduced scrap rates. Built for everyday workshop handling Constructed in special steel, the item is optimised for routine use in industrial environments; the workshop version balances hardness and toughness so the pin resists deformation while remaining serviceable in typical toolroom conditions. The 50 mm overall length provides access to recessed features and enables use in a range of fixture depths without compromising stiffness. Supplied in a transport box to prevent transit damage, the product arrives protected and ready to be integrated into inspection sets or measurement benches. Practical integration and traceable inventory control The compact test pin suits both manual gauges and automated checking stations thanks to its standard dimensions and conservative mass (approx. 0.033 kg), which eases handling and fixture mounting. Incorporation into inventory and traceability systems is straightforward: the clear SKU and GTIN enable unambiguous identification for procurement and calibration records. Where serial checks or replacement parts are scheduled, the consistent geometry ensures interchangeability across batches, supporting uninterrupted production and predictable maintenance windows. For reliable workshop gauging and assured dimensional control, contact Metav Werkzeuge to discuss application matching and procurement of the Metav IndustryLine M323.973 test pin — local expertise and fast supply from Emmerich are available to support seamless integration. Technical Data Article number: M323.973 GTIN: 4061905063329 ECLASS: 21170231 Facts Diameter: 9.73 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.033 kg Special features Material: Special steel Workshop version Supplied in transport box FAQ What tolerance does the test pin offer? The M323.973 test pin provides an accuracy of ±0.001 mm, suitable for tight end‑dimension verification and precision inspection tasks. What are the main dimensions for fixture planning? The pin measures 9.73 mm in diameter with a 50 mm overall length; mass is approximately 0.033 kg for handling and fixture mounting calculations. Is the test pin delivered protected for transport? Yes, the product is supplied in a transport box to protect the item in transit and during storage. Can the pin be used in comparator or plug‑gauge set‑ups? The consistent geometry and high tolerance make the M323.973 suitable for comparator checks and as a nominal reference in plug‑gauge arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.74mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Combine workshop robustness with ±0.001 mm repeatability and a resistant special steel construction to keep end‑measure checks reliable and traceable. Procure the gauge pin directly via Metav Werkzeuge or consult the Metav specialists for application support and supply options. Gauge pin M323.974 – 9.74 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The gauge pin M323.974 is a single precision test pin designed for end‑measurement verification and fine gauging tasks in workshop metrology. Precision tolerance ±0.001 mm Diameter 9.74 mm for end‑measure checks 50 mm test length for fixture compatibility Workshop‑grade special steel construction Accurate control with minimal uncertainty The M323.974 gauge pin delivers a ±0.001 mm tolerance, providing a level of precision that supports strict dimensional control and reduces the likelihood of part rejection. Such a fine tolerance is particularly valuable when verifying end measures or mating fits where even micrometre deviations affect assembly quality. The compact design and exact diameter make it straightforward to use in go/no‑go fixtures, inspection benches or comparison against datum surfaces, leading to more consistent quality reporting and fewer downstream corrections. Durable build tailored to workshop conditions Constructed from special steel and specified as a workshop edition, this test pin is engineered for the demands of everyday use. The 50 mm length balances reach and stiffness, aiding stable handling and repeatable seating in holders or sockets. A robust material choice increases resistance to wear and maintains the critical diameter over many inspection cycles, which preserves measurement reliability and lowers the frequency of replacements. The combination of material and geometry therefore contributes to long‑term operational efficiency. Seamless integration into inspection routines Designed as a single test pin for end measurement, the component integrates easily with common pin holders, check fixtures and bench tooling. Its compact weight and defined dimensions facilitate quick interchangeability and simple storage when used as part of a set of reference pins. Backed by Metav’s distribution and product range, the pin supports streamlined procurement and consistent supply for production and quality departments, enabling sustained traceability and dependable inspection workflow continuity. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for purchasing and technical advice on the M323.974 gauge pin. Technical Data Article number: M323.974 GTIN: 4061905063336 Manufacturer: Metav IndustryLine Facts Diameter: 9.74 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: Special steel Workshop edition Single test pin for end measurement Accuracy class: ±0.001 FAQ What applications is this gauge pin suited for? The gauge pin M323.974 is intended for end‑measure verification and fine gauging tasks in workshop metrology, where a precise 9.74 mm reference is required. Can the pin be used in standard pin holders and fixtures? Yes, the 50 mm length and defined diameter make the M323.974 compatible with common pin holders and bench fixtures used for dimensional checks. How does the ±0.001 mm tolerance affect measurement processes? Such a tight tolerance reduces measurement uncertainty and improves the reliability of go/no‑go decisions and fit inspections when using the M323.974 as a reference. Is the material suitable for regular workshop use? The special steel construction of this test pin is selected for wear resistance and durability under routine inspection cycles. Which product identifier should be used when ordering or referencing this item? Refer to the article number M323.974 or GTIN 4061905063336 when ordering or specifying the gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.75mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade construction, a tight ±0.001 mm tolerance and a compact 50 mm length for reliable end-dimension checks and assembly control — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 9.75 mm, ±0.001 mm (50 mm length) — Metav IndustryLine The gauge pin, single is a workshop-grade precision pin for end‑dimension verification and fit testing in production and inspection routines Workshop-grade precision Diameter 9.75 mm, tolerance ±0.001 mm 50 mm length in special steel Supplied in transport case Precision where measurement decisions become reliable A diameter of 9.75 mm combined with a geometric tolerance of ±0.001 mm (equivalent to 1 µm) delivers the dimensional certainty required for tight-fit checks and final acceptance tests. The compact design reduces the influence of bending and operator variation, giving consistent contact geometry for repeatable pass/fail assessments. This level of control shortens inspection times and reduces downstream rework by providing a clear, verifiable reference for go/no‑go decisions. Built for robust handling in workshop environments The workshop‑oriented construction and special steel composition balance wear resistance with manageable mass for manual handling. At 50 mm length the pin remains easy to position in blind bores and on flat reference surfaces while maintaining stability during tactile checks. Supplied in a transport case, the single unit is protected in transit and storage, ensuring the measuring surface stays free from nicks that would compromise accuracy. Practical use and integration into quality workflows The pin is suited for end‑dimension and assembly inspection, bench checks and fixture validation where a precise cylindrical reference is needed. As a single test component it supports quick interchangeability in gauge sets and can be combined with plug gauges or ring gauges for multi‑point verification strategies. Clear labelling and the included GTIN facilitate traceability within inventory and quality documentation systems, simplifying audits and part‑control procedures. For workshop precision choose the Metav IndustryLine gauge pin for reliable ±0.001 mm accuracy — contact Metav Werkzeuge in Emmerich for technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.975 GTIN: 4061905063343 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 9,75mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.75 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg eCl@ss: 21170231 Special features Workshop version Material: special steel Supplied in transport case Single test pin for end‑dimension checks FAQ What level of precision does the pin provide? The M323.975 gauge pin offers a dimensional tolerance of ±0.001 mm, equivalent to 1 µm, suitable for fine acceptance checks and tight fit controls. Which material is used for the pin? The pin is manufactured from special steel, selected to provide a balance of surface hardness and resistance to wear for repeated inspection cycles. What applications suit this test pin? Typical uses include end‑dimension verification, go/no‑go fit testing, fixture validation and quick bench checks where a precise cylindrical reference is required. Is the pin supplied ready for storage and transport? Yes; the pin is supplied in a transport case to protect the measurement surface during storage and transit. How does this pin support quality workflows? By delivering a repeatable reference diameter with a 1 µm tolerance, the pin reduces ambiguity in acceptance testing and helps streamline inspection documentation and inventory traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.76mm Precision Gauge Pin ±0.001mm Length 50mm, Workshop Finish - Metav IndustryLine
Take advantage of precise end-measurement performance and robust workshop design: the combination of ±0.001 mm tolerance and a compact 50 mm length ensures repeatable fits and quick inspection cycles. Order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.976 — single gauge pin, 9.76 mm diameter, ±0.001 mm tolerance Gauge pin M323.976 is a single-ended, high-precision gauge pin intended for accurate end measurements and plug-fit checks in production and inspection environments. Workshop version, robust finish Diameter 9.76 mm for tight fits Tolerance ±0.001 mm for ultra-precision Length 50 mm for compact handling Precision that guarantees interchangeability The core advantage of this component is its ±0.001 mm tolerance, which makes it suitable where repeatable fits and minimal clearance are required. Manufactured from special steel, the pin provides consistent hardness and surface integrity that support stable contact during measurement or assembly. When used as an end-measure gauge or as a reference plug, the controlled diameter of 9.76 mm reduces variation between production lots and allows straightforward interchangeability between mating parts. This accuracy shortens inspection loops and contributes to predictable assembly outcomes. Designed for workshop routines and reliable handling With a 50 mm length the pin combines compactness with practical handling for bench work and fixture setups. The workshop version finish resists ordinary handling wear and eases insertion into bores and gauges without unnecessary burr generation. Its single-piece construction minimises variables that could affect concentricity, and the modest mass helps to avoid undue influence on delicate assemblies. The result is a tool that integrates into everyday quality-control cycles, allowing faster checks while preserving the fine tolerances demanded in precision manufacturing. Practical applications and process benefits This gauge pin is well suited to end-measure tasks, plug-go/no-go verification and calibration jigs used in production and laboratory settings. By using a measured reference such as this pin, measurement uncertainty is reduced and throughput is improved through quicker decision-making at inspection points. The design supports clean handling and straightforward identification in a tool set, and the supplied GTIN aids traceability in inventory and quality records. For suppliers and workshops aiming to raise reproducibility, the pin serves as a compact, high-accuracy solution that complements standard metrology equipment. Choose the Metav IndustryLine gauge pin M323.976 for traceable end measurements and contact Metav Werkzeuge in Emmerich for tailored advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.976 GTIN: 4061905063350 Label: Prüfstift, einzeln, 9,76mm, +/- 0.001 mm Länge 50 mm Material: Special steel Weight: 0.033 kg Length: 50 mm Diameter: 9.76 mm Tolerance: ±0.001 mm Facts Length: 50 mm Diameter: 9.76 mm Weight: 0.033 kg Tolerance: ±0.001 mm SKU: M323.976 GTIN: 4061905063350 Special features Workshop version Single gauge pin for end measurements Compact handling for bench and jig use Application focus: end measurements FAQ What tolerance is offered by this gauge pin? The gauge pin M323.976 is manufactured to a tolerance of ±0.001 mm, guaranteeing high-precision end measurements. Which material is used for the pin? The pin is made from special steel, chosen for dimensional stability and surface quality suitable for metrology use. What applications suit this gauge pin? Typical uses include plug-fit checks, end measurements and reference gauges within inspection jigs or assembly fixtures. How is the pin identified for inventory and traceability? Identification is supported by the SKU M323.976 and GTIN 4061905063350 for stock control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com